← Commit history

Initial commit: component/xtr300airgwr

Ray ·136e00101a ·
2 files changed +279
README.mdadded+57
@@ -0,0 +1,57 @@+# XTR300AIRGWR++**Texas Instruments** · ADCs/DACs - Special Purpose · VQFN-20-EP(5x5)++XTR300AIRGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | M2 | input | Mode Input pin; selects output mode configuration; internally pulled low with 1μA |+| 2 | M1 | input | Mode Input pin; selects voltage or current output mode; internally pulled low with 1μA |+| 3 | VIN | power_in | Noninverting Signal Input for operational amplifier; voltage range (V−)+3V to (V+)−3V |+| 4 | SET | input | Input for Gain Setting and Inverting Input for operational amplifier; voltage range (V−)+3V to (V+)−3V |+| 5 | IMON | output | Current Monitor Output; provides 1/10 copy of output current; output swing (V−)+3V to (V+)−3V |+| 6 | IAOUT | output | Instrumentation Amplifier Signal Output current; output swing (V−)+3V to (V+)−3V |+| 7 | IAIN− | input | Instrumentation Amplifier Inverting Input; voltage range (V−)+3V to (V+)−3V |+| 8 | IAIN+ | input | Instrumentation Amplifier Noninverting Input; voltage range (V−)+3V to (V+)−3V |+| 9 | RG1 | passive | Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN |+| 10 | RG2 | passive | Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN |+| 11 | V− | power_in | Negative Power Supply; operating voltage range ±5V to ±22V; must connect exposed thermal pad to this pin |+| 12 | NC | unconnected | No Internal Connection |+| 13 | DRV | output | Operational Amplifier Output; voltage swing (V−)+3V to (V+)−3V; short-circuit current ±15mA to ±24mA depending on mode |+| 14 | NC | unconnected | No Internal Connection |+| 15 | V+ | power_in | Positive Power Supply; operating voltage range ±5V to ±22V; absolute maximum +44V |+| 16 | DGND | power_in | Ground for Digital I/O; must be within (V−) ≤ DGND ≤ (V+)−7V; carries digital output sink current |+| 17 | EFCM | output | Error Flag for Common-Mode Over-Range, Active Low; open-drain output with internal 1μA pull-up; indicates IA input exceeds linear range |+| 18 | EFLD | output | Error Flag for Load Error, Active Low; open-drain output with internal 1μA pull-up; indicates short-circuit or open-load condition |+| 19 | EFOT | output | Error Flag for Over-Temperature, Active Low; open-drain output with internal 1μA pull-up; activates at +140°C, resets at +125°C |+| 20 | OD | input | Output Disable, Disabled Low; digital input disables DRV output when driven low; internally pulled high with 1μA |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-20-EP(5x5) |+| Category | Data Acquisition |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `XTR300AIRGWR`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm`+- 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `xtr300airgwr-etched.step` / `xtr300airgwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xtr300airgwr.step` / `xtr300airgwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/xtr300) (39 pp, sha256 `d2c27eb00988de9f`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/xtr300airgwr-datasheet.pdf)
page.jsonadded+222
@@ -0,0 +1,222 @@+{+  "slug": "xtr300airgwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments ADCs/DACs - Special Purpose, VQFN-20-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "xtr300airgwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "xtr300airgwr.kicad_sym",+    "xtr300airgwr.kicad_mod",+    "xtr300airgwr.glb",+    "xtr300airgwr.step",+    "xtr300airgwr.lbr",+    "docs/hero.png",+    "docs/xtr300airgwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "XTR300AIRGWR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-20-EP(5x5)",+    "pin_count": 21,+    "category": "Data Acquisition",+    "subcategory": "ADCs/DACs - Special Purpose",+    "datasheet": "https://www.ti.com/cn/lit/gpn/xtr300",+    "parts": {+      "symbol": "xtr300airgwr.kicad_sym",+      "footprint": "xtr300airgwr.kicad_mod",+      "model_3d": "xtr300airgwr-etched.glb",+      "model_3d_plain": "xtr300airgwr.glb",+      "model_3d_step": "xtr300airgwr-etched.step",+      "model_3d_step_plain": "xtr300airgwr.step",+      "lbr": "xtr300airgwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C467069"+    },+    "pins": [+      {+        "number": "1",+        "name": "M2",+        "type": "input",+        "description": "Mode Input pin; selects output mode configuration; internally pulled low with 1μA"+      },+      {+        "number": "2",+        "name": "M1",+        "type": "input",+        "description": "Mode Input pin; selects voltage or current output mode; internally pulled low with 1μA"+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Noninverting Signal Input for operational amplifier; voltage range (V−)+3V to (V+)−3V"+      },+      {+        "number": "4",+        "name": "SET",+        "type": "input",+        "description": "Input for Gain Setting and Inverting Input for operational amplifier; voltage range (V−)+3V to (V+)−3V"+      },+      {+        "number": "5",+        "name": "IMON",+        "type": "output",+        "description": "Current Monitor Output; provides 1/10 copy of output current; output swing (V−)+3V to (V+)−3V"+      },+      {+        "number": "6",+        "name": "IAOUT",+        "type": "output",+        "description": "Instrumentation Amplifier Signal Output current; output swing (V−)+3V to (V+)−3V"+      },+      {+        "number": "7",+        "name": "IAIN−",+        "type": "input",+        "description": "Instrumentation Amplifier Inverting Input; voltage range (V−)+3V to (V+)−3V"+      },+      {+        "number": "8",+        "name": "IAIN+",+        "type": "input",+        "description": "Instrumentation Amplifier Noninverting Input; voltage range (V−)+3V to (V+)−3V"+      },+      {+        "number": "9",+        "name": "RG1",+        "type": "passive",+        "description": "Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN"+      },+      {+        "number": "10",+        "name": "RG2",+        "type": "passive",+        "description": "Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN"+      },+      {+        "number": "11",+        "name": "V−",+        "type": "power_in",+        "description": "Negative Power Supply; operating voltage range ±5V to ±22V; must connect exposed thermal pad to this pin"+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "No Internal Connection"+      },+      {+        "number": "13",+        "name": "DRV",+        "type": "output",+        "description": "Operational Amplifier Output; voltage swing (V−)+3V to (V+)−3V; short-circuit current ±15mA to ±24mA depending on mode"+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No Internal Connection"+      },+      {+        "number": "15",+        "name": "V+",+        "type": "power_in",+        "description": "Positive Power Supply; operating voltage range ±5V to ±22V; absolute maximum +44V"+      },+      {+        "number": "16",+        "name": "DGND",+        "type": "power_in",+        "description": "Ground for Digital I/O; must be within (V−) ≤ DGND ≤ (V+)−7V; carries digital output sink current"+      },+      {+        "number": "17",+        "name": "EFCM",+        "type": "output",+        "description": "Error Flag for Common-Mode Over-Range, Active Low; open-drain output with internal 1μA pull-up; indicates IA input exceeds linear range"+      },+      {+        "number": "18",+        "name": "EFLD",+        "type": "output",+        "description": "Error Flag for Load Error, Active Low; open-drain output with internal 1μA pull-up; indicates short-circuit or open-load condition"+      },+      {+        "number": "19",+        "name": "EFOT",+        "type": "output",+        "description": "Error Flag for Over-Temperature, Active Low; open-drain output with internal 1μA pull-up; activates at +140°C, resets at +125°C"+      },+      {+        "number": "20",+        "name": "OD",+        "type": "input",+        "description": "Output Disable, Disabled Low; digital input disables DRV output when driven low; internally pulled high with 1μA"+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 21 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 39,+        "cost_usd": 0.347,+        "at": "2026-09-21T23:52:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/xtr300",+        "pages": 39,+        "sha256": "d2c27eb00988de9f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file