main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs xtr300airgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers xtr300airgwr: viewers · Ray
package.json xtr300airgwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json xtr300airgwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/xtr300airgwr · Ray
xtr300airgwr-etched.fit.json xtr300airgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xtr300airgwr-etched.glb xtr300airgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xtr300airgwr-etched.step xtr300airgwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xtr300airgwr.glb Publish 0.1.0 · Ray
xtr300airgwr.kicad_mod Publish 0.1.0 · Ray
xtr300airgwr.kicad_sym Publish 0.1.0 · Ray
xtr300airgwr.lbr Publish 0.1.0 · Ray
xtr300airgwr.step Publish 0.1.0 · Ray

XTR300AIRGWR

Texas Instruments · ADCs/DACs - Special Purpose · VQFN-20-EP(5x5)

XTR300AIRGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 M2 input Mode Input pin; selects output mode configuration; internally pulled low with 1μA
2 M1 input Mode Input pin; selects voltage or current output mode; internally pulled low with 1μA
3 VIN power_in Noninverting Signal Input for operational amplifier; voltage range (V−)+3V to (V+)−3V
4 SET input Input for Gain Setting and Inverting Input for operational amplifier; voltage range (V−)+3V to (V+)−3V
5 IMON output Current Monitor Output; provides 1/10 copy of output current; output swing (V−)+3V to (V+)−3V
6 IAOUT output Instrumentation Amplifier Signal Output current; output swing (V−)+3V to (V+)−3V
7 IAIN− input Instrumentation Amplifier Inverting Input; voltage range (V−)+3V to (V+)−3V
8 IAIN+ input Instrumentation Amplifier Noninverting Input; voltage range (V−)+3V to (V+)−3V
9 RG1 passive Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN
10 RG2 passive Instrumentation Amplifier Gain Resistor connection point; external resistor determines IA gain per IAOUT=2(IAIN+−IAIN−)/RGAIN
11 V− power_in Negative Power Supply; operating voltage range ±5V to ±22V; must connect exposed thermal pad to this pin
12 NC unconnected No Internal Connection
13 DRV output Operational Amplifier Output; voltage swing (V−)+3V to (V+)−3V; short-circuit current ±15mA to ±24mA depending on mode
14 NC unconnected No Internal Connection
15 V+ power_in Positive Power Supply; operating voltage range ±5V to ±22V; absolute maximum +44V
16 DGND power_in Ground for Digital I/O; must be within (V−) ≤ DGND ≤ (V+)−7V; carries digital output sink current
17 EFCM output Error Flag for Common-Mode Over-Range, Active Low; open-drain output with internal 1μA pull-up; indicates IA input exceeds linear range
18 EFLD output Error Flag for Load Error, Active Low; open-drain output with internal 1μA pull-up; indicates short-circuit or open-load condition
19 EFOT output Error Flag for Over-Temperature, Active Low; open-drain output with internal 1μA pull-up; activates at +140°C, resets at +125°C
20 OD input Output Disable, Disabled Low; digital input disables DRV output when driven low; internally pulled high with 1μA
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-20-EP(5x5)
Category Data Acquisition
Pins 21

CAD (KiCad official)

  • Symbol: XTR300AIRGWR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm
  • 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: xtr300airgwr-etched.step / xtr300airgwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xtr300airgwr.step / xtr300airgwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 d2c27eb00988de9f, retrieved 2026-09-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF