main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xt26q18dwsiga: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
xt26q18dwsiga-etched.glb Publish 0.1.0 · Ray
xt26q18dwsiga-etched.step xt26q18dwsiga: factory component page (tier=lcsc) · Ray
xt26q18dwsiga-hero.glb xt26q18dwsiga: hero GLB from the etched model (keeps the MPN mark) · Ray
xt26q18dwsiga-hero.overlay.json Publish 0.1.0 · Ray
xt26q18dwsiga.glb Publish 0.1.0 · Ray
xt26q18dwsiga.kicad_mod Publish 0.1.0 · Ray
xt26q18dwsiga.kicad_sym Publish 0.1.0 · Ray
xt26q18dwsiga.lbr Publish 0.1.0 · Ray
xt26q18dwsiga.step Publish 0.1.0 · Ray

XT26Q18DWSIGA

XTX · NAND FLASH · WSON-8-EP(6x8)

XT26Q18DWSIGA from XTX, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input; when high the device is deselected and the SIO outputs are high impedance, and after power-up CS# must go high to low before a new instruction is accepted.
2 SO (SIO1) bidirectional Serial Data Output in standard SPI, shifted out on the falling edge of CLK; it becomes the bidirectional SIO1 data line during Dual and Quad commands.
3 WP# (SIO2) bidirectional Write Protect input that, when driven low while BRWD is set, prevents the block lock bits from being altered; it becomes the SIO2 data line in Quad mode, and the pin is internally pulled up to VCC.
4 VSS power_in Ground reference for the device.
5 SI (SIO0) bidirectional Serial Data Input in standard SPI, latched on the rising edge of CLK; it becomes the bidirectional SIO0 data line during Dual and Quad commands.
6 SCLK input Serial clock input that provides the synchronization reference for the SPI interface, with inputs latched on the rising edge and data output changing after the falling edge; SPI modes 0 (0,0) and 3 (1,1) are supported.
7 SIO3 bidirectional Data line SIO3 used by Quad SPI command sets; for Standard and Dual SPI command sets it must be kept at a high level.
8 VCC power_in Power supply input; the device operates from a single supply of 1.7V to 1.95V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer XTX
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature -40 85 °C 46
Storage Temperature -65 150 °C 46
VCC VCC -0.3 2.25 V 46
Voltage on I/O Pin with Respect to Ground -0.3 V 46
Electrostatic Discharge Voltage, Human Body Model -4000 4000 V JS-001-2017 (R=1500 ohms, C=100pF) 46
Electrostatic Discharge Voltage, Charge Device Model 1000 V JS-002-2018 46
Latch-Up Input Voltage with respect to GND on all power pins 1.5 V VCC = VCCmax, one pin at a time (JEDEC JESD78) 46
Latch-Up Input Current on all non-power pins -200 200 mA VCC = VCCmax, one pin at a time (JEDEC JESD78) 46
Input Capacitance CIN 6 pF VIN = 0V 46
Output Capacitance COUT 8 pF VOUT = 0V 46
Operating Temperature (recommended range) TA -40 85 °C 48
Supply Voltage VCC 1.7 1.95 V 48
VCC (min) to CS# Low tVSL 3 ms 47
Write Inhibit Voltage VWI 1.6 V 47
Input Leakage Current ILI -2 2 µA 48
Output Leakage Current ILO -2 2 µA 48
Standby Current ICC1 15 120 µA CS# = VCC, VIN = VSS or VCC 48
Read Current ICC2 20 40 mA CLK=0.1VCC/0.9VCC, FCLK=108MHz 48
Program Current 18 40 mA 48
Erase Current 18 40 mA 48
Input Low Voltage VIL -0.3 V 48
Output Low Voltage VOL 0.4 V IOL = 1.6mA 48
Serial Clock Frequency fC 108 MHz for all command 50
Serial Clock High Time tCH 3.75 ns 50
Serial Clock Low Time tCL 3.75 ns 50
Serial Clock Rise Time (Slew Rate) tCLCH 0.1 V/ns 50
Serial Clock Fall Time (Slew Rate) tCHCL 0.1 V/ns 50
CS# Active Setup Time tSLCH 10 ns 50
CS# Active Hold Time tCHSH 2.5 ns 50
CS# Not Active Setup Time tSHCH 2.5 ns 50
CS# Not Active Hold Time tCHSL 2.5 ns 50
CS# High Time tSHSL/tCS 100 ns 50
Output Disable Time tSHQZ 15 ns 50
Output Hold Time tCLQX 2 ns CL=30pF 50
Clock Low to Output Valid tCLQV 8 ns CL=30pF 50
Clock Low to Output Valid tCLQV 7 ns CL=15pF 50
Data In Setup Time tDVCH 4 ns 50
Data In Hold Time tCHDX 1.75 ns 50
WP# Setup Time before CS# Low tWHSL 20 ns 50
WP# Hold Time after CS# High tSHWL 100 ns 50
CS# High to Next Command After Reset (FFh) from Idle/Program/Read tRST 50 µs from Idle/Program/Read 51
CS# High to Next Command After Reset (FFh) from Erase tRST 550 µs from Erase 51
Page Read From Array (with ECC) tRD 210 270 µs High speed Mode Disable 51
Page Read From Array (without ECC) tRD 210 240 µs High speed Mode Disable 51
Page Program tPROG 400 750 µs 51
Block Erase tERS 3.5 10 ms 51

CAD (KiCad official)

  • Symbol: XT26Q18DWSIGA
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: xt26q18dwsiga-etched.step / xt26q18dwsiga-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xt26q18dwsiga.step / xt26q18dwsiga.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XTX datasheet (56 pp, sha256 1df41f8bbd9ef28a, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF