main
Ray Publish 0.1.0 d67a871
{
  "slug": "xt26q18dwsiga",
  "version": "0.1.0",
  "type": "component",
  "description": "XTX NAND FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "xt26q18dwsiga",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xt26q18dwsiga.kicad_sym",
    "xt26q18dwsiga.kicad_mod",
    "xt26q18dwsiga.glb",
    "xt26q18dwsiga.step",
    "xt26q18dwsiga.lbr",
    "docs/hero.png",
    "docs/xt26q18dwsiga-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xt26q18dwsiga-hero.glb",
    "xt26q18dwsiga-hero.overlay.json",
    "xt26q18dwsiga-etched.glb"
  ],
  "component": {
    "mpn": "XT26Q18DWSIGA",
    "manufacturer": "XTX",
    "package": "WSON-8-EP(6x8)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NAND FLASH",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/51607192b8eb230c87bf47f01b53facf.pdf",
    "parts": {
      "symbol": "xt26q18dwsiga.kicad_sym",
      "footprint": "xt26q18dwsiga.kicad_mod",
      "model_3d": "xt26q18dwsiga-hero.glb",
      "model_3d_plain": "xt26q18dwsiga-etched.glb",
      "model_3d_step": "xt26q18dwsiga-etched.step",
      "model_3d_step_plain": "xt26q18dwsiga.step",
      "lbr": "xt26q18dwsiga.lbr"
    },
    "distributor_links": {
      "lcsc": "C42165003"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T23:19:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip Select input; when high the device is deselected and the SIO outputs are high impedance, and after power-up CS# must go high to low before a new instruction is accepted."
      },
      {
        "number": "2",
        "name": "SO (SIO1)",
        "type": "bidirectional",
        "description": "Serial Data Output in standard SPI, shifted out on the falling edge of CLK; it becomes the bidirectional SIO1 data line during Dual and Quad commands."
      },
      {
        "number": "3",
        "name": "WP# (SIO2)",
        "type": "bidirectional",
        "description": "Write Protect input that, when driven low while BRWD is set, prevents the block lock bits from being altered; it becomes the SIO2 data line in Quad mode, and the pin is internally pulled up to VCC."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "SI (SIO0)",
        "type": "bidirectional",
        "description": "Serial Data Input in standard SPI, latched on the rising edge of CLK; it becomes the bidirectional SIO0 data line during Dual and Quad commands."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input that provides the synchronization reference for the SPI interface, with inputs latched on the rising edge and data output changing after the falling edge; SPI modes 0 (0,0) and 3 (1,1) are supported."
      },
      {
        "number": "7",
        "name": "SIO3",
        "type": "bidirectional",
        "description": "Data line SIO3 used by Quad SPI command sets; for Standard and Dual SPI command sets it must be kept at a high level."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input; the device operates from a single supply of 1.7V to 1.95V."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's pin assignment figure (Figure 1) and the WSON8 package drawing (section 17.1, page 5; The datasheet describes the package as 8-pad WSON8 (8x6mm) and does not mention an exposed thermal p; The ordering code XT26Q18DWSIGA decodes to WS = WSON8 (8x6mm), Industrial -40 to 85 C, tray carrier ",
          "exposed pad 9 added from the footprint",
          "1/9 pins cited to the wrong page (name found elsewhere): ['6:SCLK@p10']"
        ],
        "pages_sent": 42,
        "cost_usd": 0.1014,
        "at": "2026-10-28T23:19:21"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/51607192b8eb230c87bf47f01b53facf.pdf",
        "pages": 56,
        "sha256": "1df41f8bbd9ef28a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xt26q18dwsiga.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "48d282f314b0655fe52c08c0428a227d44b3ee96613ad1f01fa6c618233f3906",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xt26q18dwsiga-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "998cb7976bc4ea8a3807ad38de7da68d1830f48856d3234a8c20551e7153ab21",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}