main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xr16m752im48-f: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray
xr16m752im48-f-etched.glb Publish 0.1.0 · Ray
xr16m752im48-f-etched.step xr16m752im48-f: factory component page (tier=mfr) · Ray
xr16m752im48-f-hero.glb xr16m752im48-f: hero GLB from the etched model (keeps the MPN mark) · Ray
xr16m752im48-f-hero.overlay.json Publish 0.1.0 · Ray
xr16m752im48-f.glb Publish 0.1.0 · Ray
xr16m752im48-f.kicad_mod Publish 0.1.0 · Ray
xr16m752im48-f.kicad_sym Publish 0.1.0 · Ray
xr16m752im48-f.lbr Publish 0.1.0 · Ray
xr16m752im48-f.step Publish 0.1.0 · Ray

XR16M752IM48-F

MaxLinear · UART · TQFP-48(7x7)

XR16M752IM48-F from MaxLinear, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D5 bidirectional Data bus line 5 (bidirectional).
2 D6 bidirectional Data bus line 6 (bidirectional).
3 D7 bidirectional Data bus line 7 (bidirectional).
4 RXB input UART channel B receive data or infrared receive data; must idle HIGH, and if unused tie to VCC or pull high via 100k ohm.
5 RXA input UART channel A receive data or infrared receive data; must idle HIGH, and if unused tie to VCC or pull high via 100k ohm.
6 TXRDYB# output UART channel B transmitter ready (active low), showing TX FIFO/THR status; leave unconnected if not used.
7 TXA output UART channel A transmit data or infrared encoder data; HIGH during reset or idle in standard mode; leave unconnected if not used.
8 TXB output UART channel B transmit data or infrared encoder data; HIGH during reset or idle in standard mode; leave unconnected if not used.
9 OP2B# output Output Port 2 channel B, set through MCR[3] (LOW when MCR[3]=1, HIGH when 0); should not be used as a general output if INTB is used.
10 CSA# input Chip select A (active low) to enable channel A in Intel mode.
11 CSB# input Chip select B (active low) to enable channel B in Intel mode.
12 NC unconnected No connection.
13 XTAL1 input Crystal or external clock input; not 5V tolerant, maximum at the pin is VCC.
14 XTAL2 output Crystal or buffered clock output.
15 IOW# input Write strobe (active low) in Intel mode; rising edge transfers the data byte on the data bus to the internal register addressed.
16 CDB# input UART channel B carrier-detect (active low) or general purpose input; connect to VCC or GND when not used.
17 GND power_in Power supply common, ground.
18 RXRDYB# output UART channel B receiver ready (active low), showing RX FIFO/RHR status; leave unconnected if not used.
19 IOR# input Read strobe (active low) in Intel mode; falling edge starts an internal read cycle that puts the addressed register byte on the data bus.
20 DSRB# input UART channel B data-set-ready (active low) or general purpose input; connect to VCC or GND when not used.
21 RIB# input UART channel B ring-indicator (active low) or general purpose input; connect to VCC or GND when not used.
22 RTSB# output UART channel B request-to-send (active low) or general purpose output; must be asserted before using auto RTS flow control; also auto RS485 direction control.
23 CTSB# input UART channel B clear-to-send (active low) or general purpose input for auto CTS flow control; connect to VCC or GND when not used.
24 NC unconnected Not connected on the XR16M752 (pin is 16/68# only on the XR68M752).
25 NC unconnected No connection.
26 A2 input Address line 2; with A1 and A0 selects one of the internal registers in UART channel A/B.
27 A1 input Address line 1; with A2 and A0 selects one of the internal registers in UART channel A/B.
28 A0 input Address line 0; with A2 and A1 selects one of the internal registers in UART channel A/B.
29 INTB output Channel B interrupt output in Intel mode, set active or three-state via MCR[3].
30 INTA output Channel A interrupt output in Intel mode, set active or three-state via MCR[3].
31 RXRDYA# output UART channel A receiver ready (active low), showing RX FIFO/RHR status; leave unconnected if not used.
32 OP2A# output Output Port 2 channel A, set through MCR[3] (LOW when MCR[3]=1, HIGH when 0); should not be used as a general output if INTA is used.
33 RTSA# output UART channel A request-to-send (active low) or general purpose output; must be asserted before using auto RTS flow control; also auto RS485 direction control.
34 DTRA# output UART channel A data-terminal-ready (active low) or general purpose output; leave unconnected if not used.
35 DTRB# output UART channel B data-terminal-ready (active low) or general purpose output; leave unconnected if not used.
36 RESET input Active high reset in Intel mode; a 40 ns minimum pulse resets internal registers and outputs of channels A and B.
37 NC unconnected No connection.
38 CTSA# input UART channel A clear-to-send (active low) or general purpose input for auto CTS flow control; connect to VCC or GND when not used.
39 DSRA# input UART channel A data-set-ready (active low) or general purpose input; connect to VCC or GND when not used.
40 CDA# input UART channel A carrier-detect (active low) or general purpose input; connect to VCC or GND when not used.
41 RIA# input UART channel A ring-indicator (active low) or general purpose input; connect to VCC or GND when not used.
42 VCC power_in 1.62V to 3.63V power supply.
43 TXRDYA# output UART channel A transmitter ready (active low), showing TX FIFO/THR status; leave unconnected if not used.
44 D0 bidirectional Data bus line 0 (bidirectional).
45 D1 bidirectional Data bus line 1 (bidirectional).
46 D2 bidirectional Data bus line 2 (bidirectional).
47 D3 bidirectional Data bus line 3 (bidirectional).
48 D4 bidirectional Data bus line 4 (bidirectional).

Key specifications

Parameter Value
Manufacturer MaxLinear
Package TQFP-48(7x7)
Category Communication Interface Chip
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC 1.62 3.63 V TA = -40 to +85 C 40
Operating temperature TA -40 85 °C 40
Power supply range (abs max) VCC 4 V 40
Voltage at any pin -0.3 4 V GND-0.3V to 4V 40
Storage temperature -65 150 °C 40
Package dissipation 500 mW 40
Thermal resistance junction-ambient (48-TQFP) theta-ja 59 °C/W margin of error ±15% 40
Thermal resistance junction-case (48-TQFP) theta-jc 16 °C/W margin of error ±15% 40
Clock input low level VILCK -0.3 0.3 V 1.8V column 40
Clock input low level VILCK -0.3 0.6 V 2.5V column 40
Clock input high level VIHCK 1.4 V 1.8V column; max VCC 40
Clock input high level VIHCK 1.8 V 2.5V column; max VCC 40
Clock input high level VIHCK 2.4 V 3.3V column; max VCC 40
Input low voltage VIL -0.3 0.2 V 1.8V column 40
Input low voltage VIL -0.3 0.5 V 2.5V column 40
Input low voltage VIL -0.3 0.8 V 3.3V column 40
Input high voltage VIH 1.4 V 1.8V column; max VCC 40
Input high voltage VIH 1.8 V 2.5V column; max VCC 40
Input high voltage VIH 2 V 3.3V column; max VCC 40
Output low voltage VOL 0.4 V 1.8V column; IOL = 4 mA (assignment uncertain) 40
Output high voltage VOH 1.4 V 1.8V column; IOH = -1 mA (assignment uncertain) 40
Output high voltage VOH 1.8 V 2.5V column; IOH = -400 uA (assignment uncertain) 40
Output high voltage VOH 2 V 3.3V column; IOH = -200 uA (assignment uncertain) 40
Input low leakage current IIL -10 10 uA all voltage columns 40
Input high leakage current IIH -10 10 uA all voltage columns 40
Input pin capacitance CIN 5 pF all voltage columns 40
Power supply current ICC 0.5 mA 1.8V column; XTAL1 = 2 MHz 40
Power supply current ICC 1 mA 2.5V column; XTAL1 = 2 MHz 40
Power supply current ICC 2 mA 3.3V column; XTAL1 = 2 MHz 40
Sleep current (16 mode) ISLEEP 3 uA 1.8V column; See Test 1 40
Sleep current (16 mode) ISLEEP 10 uA 2.5V column; See Test 1 40
Sleep current (16 mode) ISLEEP 15 uA 3.3V column; See Test 1 40
Sleep current (68 mode) ISLEEP 50 uA 1.8V column; See Test 1 40
Sleep current (68 mode) ISLEEP 75 uA 2.5V column; See Test 1 40
Sleep current (68 mode) ISLEEP 100 uA 3.3V column; See Test 1 40
UART crystal oscillator frequency XTAL1 24 MHz 1.8V, 2.5V and 3.3V ±10% 41
External clock frequency ECLK 32 MHz 1.8V ± 10% 41
External clock frequency ECLK 50 MHz 2.5V ± 10% 41
External clock frequency ECLK 64 MHz 3.3V ± 10% 41
Reset pulse width TRST 40 ns 1.8V, 2.5V and 3.3V ±10% 42

CAD (KiCad official)

  • Symbol: XR16M752IM48-F
  • Footprint: Package_QFP:TQFP-48_7x7mm_P0.5mm
  • 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: xr16m752im48-f-etched.step / xr16m752im48-f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xr16m752im48-f.step / xr16m752im48-f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (54 pp, sha256 bf6c3fe3dd3629d3, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF