main
Ray Publish 0.1.0 71d0e92
{
  "slug": "xr16m752im48-f",
  "version": "0.1.0",
  "type": "component",
  "description": "MaxLinear UART, TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip",
    "xr16m752im48-f",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xr16m752im48-f.kicad_sym",
    "xr16m752im48-f.kicad_mod",
    "xr16m752im48-f.glb",
    "xr16m752im48-f.step",
    "xr16m752im48-f.lbr",
    "docs/hero.png",
    "docs/xr16m752im48-f-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xr16m752im48-f-hero.glb",
    "xr16m752im48-f-hero.overlay.json",
    "xr16m752im48-f-etched.glb"
  ],
  "component": {
    "mpn": "XR16M752IM48-F",
    "manufacturer": "MaxLinear",
    "package": "TQFP-48(7x7)",
    "pin_count": 48,
    "category": "Communication Interface Chip",
    "subcategory": "UART",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b5516c458d73077b19de729a9c864f35.pdf",
    "parts": {
      "symbol": "xr16m752im48-f.kicad_sym",
      "footprint": "xr16m752im48-f.kicad_mod",
      "model_3d": "xr16m752im48-f-hero.glb",
      "model_3d_plain": "xr16m752im48-f-etched.glb",
      "model_3d_step": "xr16m752im48-f-etched.step",
      "model_3d_step_plain": "xr16m752im48-f.step",
      "lbr": "xr16m752im48-f.lbr"
    },
    "distributor_links": {
      "lcsc": "C7397269",
      "digikey": "1016-1649-ND",
      "mouser": "701-XR16M752IM48-F"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T04:57:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1016-1649-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "701-XR16M752IM48-F",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "D5",
        "type": "bidirectional",
        "description": "Data bus line 5 (bidirectional)."
      },
      {
        "number": "2",
        "name": "D6",
        "type": "bidirectional",
        "description": "Data bus line 6 (bidirectional)."
      },
      {
        "number": "3",
        "name": "D7",
        "type": "bidirectional",
        "description": "Data bus line 7 (bidirectional)."
      },
      {
        "number": "4",
        "name": "RXB",
        "type": "input",
        "description": "UART channel B receive data or infrared receive data; must idle HIGH, and if unused tie to VCC or pull high via 100k ohm."
      },
      {
        "number": "5",
        "name": "RXA",
        "type": "input",
        "description": "UART channel A receive data or infrared receive data; must idle HIGH, and if unused tie to VCC or pull high via 100k ohm."
      },
      {
        "number": "6",
        "name": "TXRDYB#",
        "type": "output",
        "description": "UART channel B transmitter ready (active low), showing TX FIFO/THR status; leave unconnected if not used."
      },
      {
        "number": "7",
        "name": "TXA",
        "type": "output",
        "description": "UART channel A transmit data or infrared encoder data; HIGH during reset or idle in standard mode; leave unconnected if not used."
      },
      {
        "number": "8",
        "name": "TXB",
        "type": "output",
        "description": "UART channel B transmit data or infrared encoder data; HIGH during reset or idle in standard mode; leave unconnected if not used."
      },
      {
        "number": "9",
        "name": "OP2B#",
        "type": "output",
        "description": "Output Port 2 channel B, set through MCR[3] (LOW when MCR[3]=1, HIGH when 0); should not be used as a general output if INTB is used."
      },
      {
        "number": "10",
        "name": "CSA#",
        "type": "input",
        "description": "Chip select A (active low) to enable channel A in Intel mode."
      },
      {
        "number": "11",
        "name": "CSB#",
        "type": "input",
        "description": "Chip select B (active low) to enable channel B in Intel mode."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "13",
        "name": "XTAL1",
        "type": "input",
        "description": "Crystal or external clock input; not 5V tolerant, maximum at the pin is VCC."
      },
      {
        "number": "14",
        "name": "XTAL2",
        "type": "output",
        "description": "Crystal or buffered clock output."
      },
      {
        "number": "15",
        "name": "IOW#",
        "type": "input",
        "description": "Write strobe (active low) in Intel mode; rising edge transfers the data byte on the data bus to the internal register addressed."
      },
      {
        "number": "16",
        "name": "CDB#",
        "type": "input",
        "description": "UART channel B carrier-detect (active low) or general purpose input; connect to VCC or GND when not used."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply common, ground."
      },
      {
        "number": "18",
        "name": "RXRDYB#",
        "type": "output",
        "description": "UART channel B receiver ready (active low), showing RX FIFO/RHR status; leave unconnected if not used."
      },
      {
        "number": "19",
        "name": "IOR#",
        "type": "input",
        "description": "Read strobe (active low) in Intel mode; falling edge starts an internal read cycle that puts the addressed register byte on the data bus."
      },
      {
        "number": "20",
        "name": "DSRB#",
        "type": "input",
        "description": "UART channel B data-set-ready (active low) or general purpose input; connect to VCC or GND when not used."
      },
      {
        "number": "21",
        "name": "RIB#",
        "type": "input",
        "description": "UART channel B ring-indicator (active low) or general purpose input; connect to VCC or GND when not used."
      },
      {
        "number": "22",
        "name": "RTSB#",
        "type": "output",
        "description": "UART channel B request-to-send (active low) or general purpose output; must be asserted before using auto RTS flow control; also auto RS485 direction control."
      },
      {
        "number": "23",
        "name": "CTSB#",
        "type": "input",
        "description": "UART channel B clear-to-send (active low) or general purpose input for auto CTS flow control; connect to VCC or GND when not used."
      },
      {
        "number": "24",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected on the XR16M752 (pin is 16/68# only on the XR68M752)."
      },
      {
        "number": "25",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "26",
        "name": "A2",
        "type": "input",
        "description": "Address line 2; with A1 and A0 selects one of the internal registers in UART channel A/B."
      },
      {
        "number": "27",
        "name": "A1",
        "type": "input",
        "description": "Address line 1; with A2 and A0 selects one of the internal registers in UART channel A/B."
      },
      {
        "number": "28",
        "name": "A0",
        "type": "input",
        "description": "Address line 0; with A2 and A1 selects one of the internal registers in UART channel A/B."
      },
      {
        "number": "29",
        "name": "INTB",
        "type": "output",
        "description": "Channel B interrupt output in Intel mode, set active or three-state via MCR[3]."
      },
      {
        "number": "30",
        "name": "INTA",
        "type": "output",
        "description": "Channel A interrupt output in Intel mode, set active or three-state via MCR[3]."
      },
      {
        "number": "31",
        "name": "RXRDYA#",
        "type": "output",
        "description": "UART channel A receiver ready (active low), showing RX FIFO/RHR status; leave unconnected if not used."
      },
      {
        "number": "32",
        "name": "OP2A#",
        "type": "output",
        "description": "Output Port 2 channel A, set through MCR[3] (LOW when MCR[3]=1, HIGH when 0); should not be used as a general output if INTA is used."
      },
      {
        "number": "33",
        "name": "RTSA#",
        "type": "output",
        "description": "UART channel A request-to-send (active low) or general purpose output; must be asserted before using auto RTS flow control; also auto RS485 direction control."
      },
      {
        "number": "34",
        "name": "DTRA#",
        "type": "output",
        "description": "UART channel A data-terminal-ready (active low) or general purpose output; leave unconnected if not used."
      },
      {
        "number": "35",
        "name": "DTRB#",
        "type": "output",
        "description": "UART channel B data-terminal-ready (active low) or general purpose output; leave unconnected if not used."
      },
      {
        "number": "36",
        "name": "RESET",
        "type": "input",
        "description": "Active high reset in Intel mode; a 40 ns minimum pulse resets internal registers and outputs of channels A and B."
      },
      {
        "number": "37",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "38",
        "name": "CTSA#",
        "type": "input",
        "description": "UART channel A clear-to-send (active low) or general purpose input for auto CTS flow control; connect to VCC or GND when not used."
      },
      {
        "number": "39",
        "name": "DSRA#",
        "type": "input",
        "description": "UART channel A data-set-ready (active low) or general purpose input; connect to VCC or GND when not used."
      },
      {
        "number": "40",
        "name": "CDA#",
        "type": "input",
        "description": "UART channel A carrier-detect (active low) or general purpose input; connect to VCC or GND when not used."
      },
      {
        "number": "41",
        "name": "RIA#",
        "type": "input",
        "description": "UART channel A ring-indicator (active low) or general purpose input; connect to VCC or GND when not used."
      },
      {
        "number": "42",
        "name": "VCC",
        "type": "power_in",
        "description": "1.62V to 3.63V power supply."
      },
      {
        "number": "43",
        "name": "TXRDYA#",
        "type": "output",
        "description": "UART channel A transmitter ready (active low), showing TX FIFO/THR status; leave unconnected if not used."
      },
      {
        "number": "44",
        "name": "D0",
        "type": "bidirectional",
        "description": "Data bus line 0 (bidirectional)."
      },
      {
        "number": "45",
        "name": "D1",
        "type": "bidirectional",
        "description": "Data bus line 1 (bidirectional)."
      },
      {
        "number": "46",
        "name": "D2",
        "type": "bidirectional",
        "description": "Data bus line 2 (bidirectional)."
      },
      {
        "number": "47",
        "name": "D3",
        "type": "bidirectional",
        "description": "Data bus line 3 (bidirectional)."
      },
      {
        "number": "48",
        "name": "D4",
        "type": "bidirectional",
        "description": "Data bus line 4 (bidirectional)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table lists pin 24 only as 16/68# (XR68M752 only, not available on XR16M752) and its NC row ; The INTB description text refers to OP2A# and INTA, which looks like a datasheet typo. The pin funct; The -F suffix is not defined in the ordering table. XR16M752IM48 is the TQFP-48 Intel-mode-only part"
        ],
        "pages_sent": 19,
        "cost_usd": 0.4094,
        "at": "2026-11-12T04:56:52"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/b5516c458d73077b19de729a9c864f35.pdf",
        "pages": 54,
        "sha256": "bf6c3fe3dd3629d3",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xr16m752im48-f.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "14ca7676e4932e92f0eca0c6d56ce3018cd28a2531204a70ab7bbacb3eeb3cf5",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xr16m752im48-f-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1864cf3c752897c45135c23c4f3d295964a8184469ad8ad5de1fbdf819b40d27",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "48 PIN TQFP - 7 X 7 X 1 mm",
      "source_page": 49,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          1.0,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "xr16m752im48-f.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}