main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers vnh5200astr-e: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray
vnh5200astr-e-etched.glb Publish 0.1.0 · Ray
vnh5200astr-e-etched.step vnh5200astr-e: factory component page (tier=lcsc) · Ray
vnh5200astr-e-hero.glb vnh5200astr-e: hero GLB from the etched model (keeps the MPN mark) · Ray
vnh5200astr-e-hero.overlay.json Publish 0.1.0 · Ray
vnh5200astr-e.glb Publish 0.1.0 · Ray
vnh5200astr-e.kicad_mod Publish 0.1.0 · Ray
vnh5200astr-e.kicad_sym Publish 0.1.0 · Ray
vnh5200astr-e.lbr Publish 0.1.0 · Ray
vnh5200astr-e.step Publish 0.1.0 · Ray

VNH5200ASTR-E

STMicroelectronics · Brushed DC Motor Drivers · SO-16

VNH5200ASTR-E from STMicroelectronics, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GNDA power_in Source of low-side switch A, serving as the power ground for leg A.
2 OUTA output Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor.
3 INA input Voltage-controlled, CMOS-compatible clockwise input with hysteresis that sets the bridge state according to the truth table.
4 VCC power_in Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V.
5 VCC power_in Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V.
6 INB input Voltage-controlled, CMOS-compatible counterclockwise input with hysteresis that sets the bridge state according to the truth table.
7 OUTB output Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor.
8 GNDB power_in Source of low-side switch B, serving as the power ground for leg B.
9 GNDB power_in Source of low-side switch B, serving as the power ground for leg B.
10 OUTB output Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor.
11 ENB/DIAGB bidirectional Open-drain status pin for high-side and low-side switches B that must be pulled up externally, is pulled low to disable half-bridge B, and is pulled low by the device on fault detection.
12 VCC power_in Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V.
13 CS output Analog current sense output delivering a current proportional to the motor current, readable as a voltage across an external resistor.
14 ENA/DIAGA bidirectional Open-drain status pin for high-side and low-side switches A that must be pulled up externally, is pulled low to disable half-bridge A, and is pulled low by the device on fault detection.
15 OUTA output Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor.
16 GNDA power_in Source of low-side switch A, serving as the power ground for leg A.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-16
Category Motor Driver ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse output current (continuous) IR -15 A 8
Input current (INA and INB pins) IIN -10 10 mA 8
Enable input current (DIAGA/ENA and DIAGB/ENB pins) IEN -10 10 mA 8
Junction operating temperature Tc -40 150 °C 8
Storage temperature TSTG -55 150 °C 8
Supply voltage VCC 40 V 8
Electrostatic discharge (human body model) VESD 2 kV Human body model: R=1.5 kΩ, C=100 pF 8
DC reverse ground pin current IGND 200 mA 8
Operating supply voltage VCC 5.5 18 V 9
Supply current (standby) IS 3 6 µA Off-state with all fault cleared and ENx = 0 (standby); INA = INB = 0; Tj = 25°C; VCC = 13 V 9
Supply current (standby) IS 10 µA Off-state with all fault cleared and ENx = 0 (standby); INA = INB = 0; VCC = 13 V; Tj = -40°C to 150°C 9
Supply current (off-state, no standby) IS 5 mA Off-state (no standby); INA = INB = 0; ENx = 5 V; Tj = -40°C to 150°C 9
Supply current (on-state) IS 3 6 mA On-state: INA or INB = 5 V 9
Static high-side resistance RONHS 110 mΩ IOUT = 2 A; Tj = 25°C 9
Static high-side resistance RONHS 250 mΩ IOUT = 2 A; Tj = -40 to 150°C 9
Static low-side resistance RONLS 75 mΩ IOUT = 2 A; Tj = 25°C 9
Static low-side resistance RONLS 150 mΩ IOUT = 2 A; Tj = -40°C to 150°C 9
Free-wheeling diode forward voltage Vf 0.7 0.9 V IOUT = -2 A; Tj = 150°C 9
High-side off-state output current (per channel) IL(off) 0 3 µA Tj = 25°C; VOUTX = ENX = 0 V; VCC = 13 V 9
High-side off-state output current (per channel) IL(off) 0 5 µA Tj = 125°C; VOUTX = ENX = 0 V; VCC = 13 V 9
Input low level voltage VIL 0.9 V Normal operation (DIAGX/ENX pin acts as an input pin) 10
Input high level voltage VIH 2.1 V Normal operation (DIAGX/ENX pin acts as an input pin) 10
Input clamp voltage VICL 5.5 6.3 7.5 V IIN = 1 mA 10
Input clamp voltage VICL -1 -0.7 -0.3 V IIN = -1 mA 10
Input current (low) IINL 1 µA VIN = 0.9 V 10
Input current (high) IINH 10 µA VIN = 2.1 V 10
Enable output low level voltage VDIAG 0.4 V Fault operation (DIAGX/ENX pin acts as an output pin); IEN = 1 mA 10
Turn-on delay time td(on) 50 µs VCC = 13 V, RLOAD = 6.5 Ω; input rise time < 1µs (see Figure 6) 10
Turn-off delay time td(off) 120 µs VCC = 13 V, RLOAD = 6.5 Ω; input rise time < 1µs (see Figure 6) 10
Delay time during change of operating mode tDEL 200 400 1600 µs VCC = 13 V, RLOAD = 6.5 Ω 10
Undervoltage shutdown VUSD 4 5 V 11
High-side current limitation ILIM_H 8 12 16 A 11
Shutdown LS current ISD_LS 8 15 23 A 11
High-side clamp voltage (VCC to OUTA = 0 or OUTB = 0) VCLPH 41 46 52 V IOUT = 100 mA; tclamp = 1 ms 11
Low-side clamp voltage (OUTA = VCC or OUTB = VCC to GND) VCLPLS 41 46 52 V IOUT = 100 mA; tclamp = 1 ms 11
High-side thermal shutdown temperature TTSD_HS 150 175 200 °C VIN = 2.1 V 11
Low-side thermal shutdown temperature TTSD_LS 150 175 200 °C VIN = 0 V 11
Total clamp voltage (VCC to GND) VCLP 41 46 52 V IOUT = 100 mA; tclamp = 1 ms 11
Time to shutdown for the low-side tSD_LS 10 µs 11
Analog sense current ratio K0 (IOUT/ISENSE) K0 990 1600 2330 IOUT = 0.075 A; VSENSE = 0.5 V; Tj = -40°C to 150°C 11
Analog sense current ratio K1 (IOUT/ISENSE) K1 860 1450 2000 IOUT = 0.25 A; VSENSE = 0.5 V; Tj = -40°C to 150°C 11
Analog sense current ratio K2 (IOUT/ISENSE) K2 890 1140 1270 IOUT = 2 A; VSENSE = 1 V; Tj = -40°C to 150°C 11
Analog sense current ratio K3 (IOUT/ISENSE) K3 900 1080 1300 IOUT = 6 A; VSENSE = 4 V; Tj = -40°C to 150°C 11
Analog sense current drift dK0/K0 dK0/K0 -20 20 % IOUT = 0.075 A; VSENSE = 0.5 V; Tj = -40°C to 150°C 11
Analog sense current drift dK1/K1 dK1/K1 -30 30 % IOUT = 0.25 A; VSENSE = 0.5 V; Tj = -40°C to 150°C 11
Analog sense current drift dK2/K2 dK2/K2 -14 14 % IOUT = 2 A; VSENSE = 1 V; Tj = -40°C to 150°C 11
Analog sense current drift dK3/K3 dK3/K3 -14 14 % IOUT = 6 A; VSENSE = 4 V; Tj = -40°C to 150°C 11
Max analog sense output voltage VSENSE 5 V IOUT = 2 A; RSENSE = 10 kΩ 11
Analog sense leakage current ISENSE0 0 5 µA IOUT = 0 A; VSENSE = 0 V; VIN = 0 V; Tj = -40°C to 150°C 12

CAD (KiCad official)

  • Symbol: VNH5200ASTR-E
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SO-16 (KiCad packages3D, STEP)
  • 3D model files: vnh5200astr-e-etched.step / vnh5200astr-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vnh5200astr-e.step / vnh5200astr-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (31 pp, sha256 8048a96dfd83d4f5, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF