main
Ray Publish 0.1.0 f9913e8
{
  "slug": "vnh5200astr-e",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Brushed DC Motor Drivers, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "vnh5200astr-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "vnh5200astr-e.kicad_sym",
    "vnh5200astr-e.kicad_mod",
    "vnh5200astr-e.glb",
    "vnh5200astr-e.step",
    "vnh5200astr-e.lbr",
    "docs/hero.png",
    "docs/vnh5200astr-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "vnh5200astr-e-hero.glb",
    "vnh5200astr-e-hero.overlay.json",
    "vnh5200astr-e-etched.glb"
  ],
  "component": {
    "mpn": "VNH5200ASTR-E",
    "manufacturer": "STMicroelectronics",
    "package": "SO-16",
    "pin_count": 16,
    "category": "Motor Driver ICs",
    "subcategory": "Brushed DC Motor Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927145314172929",
    "parts": {
      "symbol": "vnh5200astr-e.kicad_sym",
      "footprint": "vnh5200astr-e.kicad_mod",
      "model_3d": "vnh5200astr-e-hero.glb",
      "model_3d_plain": "vnh5200astr-e-etched.glb",
      "model_3d_step": "vnh5200astr-e-etched.step",
      "model_3d_step_plain": "vnh5200astr-e.step",
      "lbr": "vnh5200astr-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C2150596",
      "mouser": "511-VNH5200ASTR-E"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T11:02:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 850 calls left today"
      },
      "mouser": {
        "pn": "511-VNH5200ASTR-E",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GNDA",
        "type": "power_in",
        "description": "Source of low-side switch A, serving as the power ground for leg A."
      },
      {
        "number": "2",
        "name": "OUTA",
        "type": "output",
        "description": "Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor."
      },
      {
        "number": "3",
        "name": "INA",
        "type": "input",
        "description": "Voltage-controlled, CMOS-compatible clockwise input with hysteresis that sets the bridge state according to the truth table."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V."
      },
      {
        "number": "6",
        "name": "INB",
        "type": "input",
        "description": "Voltage-controlled, CMOS-compatible counterclockwise input with hysteresis that sets the bridge state according to the truth table."
      },
      {
        "number": "7",
        "name": "OUTB",
        "type": "output",
        "description": "Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor."
      },
      {
        "number": "8",
        "name": "GNDB",
        "type": "power_in",
        "description": "Source of low-side switch B, serving as the power ground for leg B."
      },
      {
        "number": "9",
        "name": "GNDB",
        "type": "power_in",
        "description": "Source of low-side switch B, serving as the power ground for leg B."
      },
      {
        "number": "10",
        "name": "OUTB",
        "type": "output",
        "description": "Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor."
      },
      {
        "number": "11",
        "name": "ENB/DIAGB",
        "type": "bidirectional",
        "description": "Open-drain status pin for high-side and low-side switches B that must be pulled up externally, is pulled low to disable half-bridge B, and is pulled low by the device on fault detection."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V."
      },
      {
        "number": "13",
        "name": "CS",
        "type": "output",
        "description": "Analog current sense output delivering a current proportional to the motor current, readable as a voltage across an external resistor."
      },
      {
        "number": "14",
        "name": "ENA/DIAGA",
        "type": "bidirectional",
        "description": "Open-drain status pin for high-side and low-side switches A that must be pulled up externally, is pulled low to disable half-bridge A, and is pulled low by the device on fault detection."
      },
      {
        "number": "15",
        "name": "OUTA",
        "type": "output",
        "description": "Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor."
      },
      {
        "number": "16",
        "name": "GNDA",
        "type": "power_in",
        "description": "Source of low-side switch A, serving as the power ground for leg A."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN VNH5200ASTR-E is the tape-and-reel order code for the SO-16N package (Table 1), so the 16-pi; The datasheet gives no per-pin voltage or current limits for pins other than the supply (VCC) and th"
        ],
        "pages_sent": 31,
        "cost_usd": 0.0908,
        "at": "2026-11-10T11:02:42"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927145314172929",
        "pages": 31,
        "sha256": "8048a96dfd83d4f5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "vnh5200astr-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "vnh5200astr-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5ca35121adc19ac193f05758ff40ced825646304795bf35772a2ca37223ab44",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SO-16N",
      "source_page": 28,
      "D": {
        "nom_mm": 9.9,
        "range_mm": [
          9.8,
          10.0
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.75,
        "range_mm": [
          null,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "vnh5200astr-e.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}