main
Ray
Publish 0.1.0
f9913e8
VNH5200ASTR-E
STMicroelectronics · Brushed DC Motor Drivers · SO-16
VNH5200ASTR-E from STMicroelectronics, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GNDA | power_in | Source of low-side switch A, serving as the power ground for leg A. |
| 2 | OUTA | output | Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor. |
| 3 | INA | input | Voltage-controlled, CMOS-compatible clockwise input with hysteresis that sets the bridge state according to the truth table. |
| 4 | VCC | power_in | Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V. |
| 5 | VCC | power_in | Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V. |
| 6 | INB | input | Voltage-controlled, CMOS-compatible counterclockwise input with hysteresis that sets the bridge state according to the truth table. |
| 7 | OUTB | output | Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor. |
| 8 | GNDB | power_in | Source of low-side switch B, serving as the power ground for leg B. |
| 9 | GNDB | power_in | Source of low-side switch B, serving as the power ground for leg B. |
| 10 | OUTB | output | Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor. |
| 11 | ENB/DIAGB | bidirectional | Open-drain status pin for high-side and low-side switches B that must be pulled up externally, is pulled low to disable half-bridge B, and is pulled low by the device on fault detection. |
| 12 | VCC | power_in | Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V. |
| 13 | CS | output | Analog current sense output delivering a current proportional to the motor current, readable as a voltage across an external resistor. |
| 14 | ENA/DIAGA | bidirectional | Open-drain status pin for high-side and low-side switches A that must be pulled up externally, is pulled low to disable half-bridge A, and is pulled low by the device on fault detection. |
| 15 | OUTA | output | Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor. |
| 16 | GNDA | power_in | Source of low-side switch A, serving as the power ground for leg A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-16 |
| Category | Motor Driver ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse output current (continuous) | IR | -15 | A | 8 | |||
| Input current (INA and INB pins) | IIN | -10 | 10 | mA | 8 | ||
| Enable input current (DIAGA/ENA and DIAGB/ENB pins) | IEN | -10 | 10 | mA | 8 | ||
| Junction operating temperature | Tc | -40 | 150 | °C | 8 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 8 | ||
| Supply voltage | VCC | 40 | V | 8 | |||
| Electrostatic discharge (human body model) | VESD | 2 | kV | Human body model: R=1.5 kΩ, C=100 pF | 8 | ||
| DC reverse ground pin current | IGND | 200 | mA | 8 | |||
| Operating supply voltage | VCC | 5.5 | 18 | V | 9 | ||
| Supply current (standby) | IS | 3 | 6 | µA | Off-state with all fault cleared and ENx = 0 (standby); INA = INB = 0; Tj = 25°C; VCC = 13 V | 9 | |
| Supply current (standby) | IS | 10 | µA | Off-state with all fault cleared and ENx = 0 (standby); INA = INB = 0; VCC = 13 V; Tj = -40°C to 150°C | 9 | ||
| Supply current (off-state, no standby) | IS | 5 | mA | Off-state (no standby); INA = INB = 0; ENx = 5 V; Tj = -40°C to 150°C | 9 | ||
| Supply current (on-state) | IS | 3 | 6 | mA | On-state: INA or INB = 5 V | 9 | |
| Static high-side resistance | RONHS | 110 | mΩ | IOUT = 2 A; Tj = 25°C | 9 | ||
| Static high-side resistance | RONHS | 250 | mΩ | IOUT = 2 A; Tj = -40 to 150°C | 9 | ||
| Static low-side resistance | RONLS | 75 | mΩ | IOUT = 2 A; Tj = 25°C | 9 | ||
| Static low-side resistance | RONLS | 150 | mΩ | IOUT = 2 A; Tj = -40°C to 150°C | 9 | ||
| Free-wheeling diode forward voltage | Vf | 0.7 | 0.9 | V | IOUT = -2 A; Tj = 150°C | 9 | |
| High-side off-state output current (per channel) | IL(off) | 0 | 3 | µA | Tj = 25°C; VOUTX = ENX = 0 V; VCC = 13 V | 9 | |
| High-side off-state output current (per channel) | IL(off) | 0 | 5 | µA | Tj = 125°C; VOUTX = ENX = 0 V; VCC = 13 V | 9 | |
| Input low level voltage | VIL | 0.9 | V | Normal operation (DIAGX/ENX pin acts as an input pin) | 10 | ||
| Input high level voltage | VIH | 2.1 | V | Normal operation (DIAGX/ENX pin acts as an input pin) | 10 | ||
| Input clamp voltage | VICL | 5.5 | 6.3 | 7.5 | V | IIN = 1 mA | 10 |
| Input clamp voltage | VICL | -1 | -0.7 | -0.3 | V | IIN = -1 mA | 10 |
| Input current (low) | IINL | 1 | µA | VIN = 0.9 V | 10 | ||
| Input current (high) | IINH | 10 | µA | VIN = 2.1 V | 10 | ||
| Enable output low level voltage | VDIAG | 0.4 | V | Fault operation (DIAGX/ENX pin acts as an output pin); IEN = 1 mA | 10 | ||
| Turn-on delay time | td(on) | 50 | µs | VCC = 13 V, RLOAD = 6.5 Ω; input rise time < 1µs (see Figure 6) | 10 | ||
| Turn-off delay time | td(off) | 120 | µs | VCC = 13 V, RLOAD = 6.5 Ω; input rise time < 1µs (see Figure 6) | 10 | ||
| Delay time during change of operating mode | tDEL | 200 | 400 | 1600 | µs | VCC = 13 V, RLOAD = 6.5 Ω | 10 |
| Undervoltage shutdown | VUSD | 4 | 5 | V | 11 | ||
| High-side current limitation | ILIM_H | 8 | 12 | 16 | A | 11 | |
| Shutdown LS current | ISD_LS | 8 | 15 | 23 | A | 11 | |
| High-side clamp voltage (VCC to OUTA = 0 or OUTB = 0) | VCLPH | 41 | 46 | 52 | V | IOUT = 100 mA; tclamp = 1 ms | 11 |
| Low-side clamp voltage (OUTA = VCC or OUTB = VCC to GND) | VCLPLS | 41 | 46 | 52 | V | IOUT = 100 mA; tclamp = 1 ms | 11 |
| High-side thermal shutdown temperature | TTSD_HS | 150 | 175 | 200 | °C | VIN = 2.1 V | 11 |
| Low-side thermal shutdown temperature | TTSD_LS | 150 | 175 | 200 | °C | VIN = 0 V | 11 |
| Total clamp voltage (VCC to GND) | VCLP | 41 | 46 | 52 | V | IOUT = 100 mA; tclamp = 1 ms | 11 |
| Time to shutdown for the low-side | tSD_LS | 10 | µs | 11 | |||
| Analog sense current ratio K0 (IOUT/ISENSE) | K0 | 990 | 1600 | 2330 | IOUT = 0.075 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 | |
| Analog sense current ratio K1 (IOUT/ISENSE) | K1 | 860 | 1450 | 2000 | IOUT = 0.25 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 | |
| Analog sense current ratio K2 (IOUT/ISENSE) | K2 | 890 | 1140 | 1270 | IOUT = 2 A; VSENSE = 1 V; Tj = -40°C to 150°C | 11 | |
| Analog sense current ratio K3 (IOUT/ISENSE) | K3 | 900 | 1080 | 1300 | IOUT = 6 A; VSENSE = 4 V; Tj = -40°C to 150°C | 11 | |
| Analog sense current drift dK0/K0 | dK0/K0 | -20 | 20 | % | IOUT = 0.075 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 | |
| Analog sense current drift dK1/K1 | dK1/K1 | -30 | 30 | % | IOUT = 0.25 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 | |
| Analog sense current drift dK2/K2 | dK2/K2 | -14 | 14 | % | IOUT = 2 A; VSENSE = 1 V; Tj = -40°C to 150°C | 11 | |
| Analog sense current drift dK3/K3 | dK3/K3 | -14 | 14 | % | IOUT = 6 A; VSENSE = 4 V; Tj = -40°C to 150°C | 11 | |
| Max analog sense output voltage | VSENSE | 5 | V | IOUT = 2 A; RSENSE = 10 kΩ | 11 | ||
| Analog sense leakage current | ISENSE0 | 0 | 5 | µA | IOUT = 0 A; VSENSE = 0 V; VIN = 0 V; Tj = -40°C to 150°C | 12 |
CAD (KiCad official)
- Symbol:
VNH5200ASTR-E - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SO-16 (KiCad packages3D, STEP)
- 3D model files:
vnh5200astr-e-etched.step/vnh5200astr-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vnh5200astr-e.step/vnh5200astr-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (31 pp, sha256
8048a96dfd83d4f5, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# VNH5200ASTR-E
**STMicroelectronics** · Brushed DC Motor Drivers · SO-16
VNH5200ASTR-E from STMicroelectronics, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GNDA | power_in | Source of low-side switch A, serving as the power ground for leg A. |
| 2 | OUTA | output | Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor. |
| 3 | INA | input | Voltage-controlled, CMOS-compatible clockwise input with hysteresis that sets the bridge state according to the truth table. |
| 4 | VCC | power_in | Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V. |
| 5 | VCC | power_in | Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V. |
| 6 | INB | input | Voltage-controlled, CMOS-compatible counterclockwise input with hysteresis that sets the bridge state according to the truth table. |
| 7 | OUTB | output | Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor. |
| 8 | GNDB | power_in | Source of low-side switch B, serving as the power ground for leg B. |
| 9 | GNDB | power_in | Source of low-side switch B, serving as the power ground for leg B. |
| 10 | OUTB | output | Source of high-side switch B and drain of low-side switch B, providing the power connection to the motor. |
| 11 | ENB/DIAGB | bidirectional | Open-drain status pin for high-side and low-side switches B that must be pulled up externally, is pulled low to disable half-bridge B, and is pulled low by the device on fault detection. |
| 12 | VCC | power_in | Battery connection; operating supply voltage is 5.5 V to 18 V and absolute maximum supply voltage is +40 V. |
| 13 | CS | output | Analog current sense output delivering a current proportional to the motor current, readable as a voltage across an external resistor. |
| 14 | ENA/DIAGA | bidirectional | Open-drain status pin for high-side and low-side switches A that must be pulled up externally, is pulled low to disable half-bridge A, and is pulled low by the device on fault detection. |
| 15 | OUTA | output | Source of high-side switch A and drain of low-side switch A, providing the power connection to the motor. |
| 16 | GNDA | power_in | Source of low-side switch A, serving as the power ground for leg A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-16 |
| Category | Motor Driver ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse output current (continuous) | IR | -15 | | | A | | 8 |
| Input current (INA and INB pins) | IIN | -10 | | 10 | mA | | 8 |
| Enable input current (DIAGA/ENA and DIAGB/ENB pins) | IEN | -10 | | 10 | mA | | 8 |
| Junction operating temperature | Tc | -40 | | 150 | °C | | 8 |
| Storage temperature | TSTG | -55 | | 150 | °C | | 8 |
| Supply voltage | VCC | | | 40 | V | | 8 |
| Electrostatic discharge (human body model) | VESD | | | 2 | kV | Human body model: R=1.5 kΩ, C=100 pF | 8 |
| DC reverse ground pin current | IGND | | | 200 | mA | | 8 |
| Operating supply voltage | VCC | 5.5 | | 18 | V | | 9 |
| Supply current (standby) | IS | | 3 | 6 | µA | Off-state with all fault cleared and ENx = 0 (standby); INA = INB = 0; Tj = 25°C; VCC = 13 V | 9 |
| Supply current (standby) | IS | | | 10 | µA | Off-state with all fault cleared and ENx = 0 (standby); INA = INB = 0; VCC = 13 V; Tj = -40°C to 150°C | 9 |
| Supply current (off-state, no standby) | IS | | | 5 | mA | Off-state (no standby); INA = INB = 0; ENx = 5 V; Tj = -40°C to 150°C | 9 |
| Supply current (on-state) | IS | | 3 | 6 | mA | On-state: INA or INB = 5 V | 9 |
| Static high-side resistance | RONHS | | | 110 | mΩ | IOUT = 2 A; Tj = 25°C | 9 |
| Static high-side resistance | RONHS | | | 250 | mΩ | IOUT = 2 A; Tj = -40 to 150°C | 9 |
| Static low-side resistance | RONLS | | | 75 | mΩ | IOUT = 2 A; Tj = 25°C | 9 |
| Static low-side resistance | RONLS | | | 150 | mΩ | IOUT = 2 A; Tj = -40°C to 150°C | 9 |
| Free-wheeling diode forward voltage | Vf | | 0.7 | 0.9 | V | IOUT = -2 A; Tj = 150°C | 9 |
| High-side off-state output current (per channel) | IL(off) | 0 | | 3 | µA | Tj = 25°C; VOUTX = ENX = 0 V; VCC = 13 V | 9 |
| High-side off-state output current (per channel) | IL(off) | 0 | | 5 | µA | Tj = 125°C; VOUTX = ENX = 0 V; VCC = 13 V | 9 |
| Input low level voltage | VIL | | | 0.9 | V | Normal operation (DIAGX/ENX pin acts as an input pin) | 10 |
| Input high level voltage | VIH | 2.1 | | | V | Normal operation (DIAGX/ENX pin acts as an input pin) | 10 |
| Input clamp voltage | VICL | 5.5 | 6.3 | 7.5 | V | IIN = 1 mA | 10 |
| Input clamp voltage | VICL | -1 | -0.7 | -0.3 | V | IIN = -1 mA | 10 |
| Input current (low) | IINL | | | 1 | µA | VIN = 0.9 V | 10 |
| Input current (high) | IINH | | | 10 | µA | VIN = 2.1 V | 10 |
| Enable output low level voltage | VDIAG | | | 0.4 | V | Fault operation (DIAGX/ENX pin acts as an output pin); IEN = 1 mA | 10 |
| Turn-on delay time | td(on) | | | 50 | µs | VCC = 13 V, RLOAD = 6.5 Ω; input rise time < 1µs (see Figure 6) | 10 |
| Turn-off delay time | td(off) | | | 120 | µs | VCC = 13 V, RLOAD = 6.5 Ω; input rise time < 1µs (see Figure 6) | 10 |
| Delay time during change of operating mode | tDEL | 200 | 400 | 1600 | µs | VCC = 13 V, RLOAD = 6.5 Ω | 10 |
| Undervoltage shutdown | VUSD | 4 | | 5 | V | | 11 |
| High-side current limitation | ILIM_H | 8 | 12 | 16 | A | | 11 |
| Shutdown LS current | ISD_LS | 8 | 15 | 23 | A | | 11 |
| High-side clamp voltage (VCC to OUTA = 0 or OUTB = 0) | VCLPH | 41 | 46 | 52 | V | IOUT = 100 mA; tclamp = 1 ms | 11 |
| Low-side clamp voltage (OUTA = VCC or OUTB = VCC to GND) | VCLPLS | 41 | 46 | 52 | V | IOUT = 100 mA; tclamp = 1 ms | 11 |
| High-side thermal shutdown temperature | TTSD_HS | 150 | 175 | 200 | °C | VIN = 2.1 V | 11 |
| Low-side thermal shutdown temperature | TTSD_LS | 150 | 175 | 200 | °C | VIN = 0 V | 11 |
| Total clamp voltage (VCC to GND) | VCLP | 41 | 46 | 52 | V | IOUT = 100 mA; tclamp = 1 ms | 11 |
| Time to shutdown for the low-side | tSD_LS | | | 10 | µs | | 11 |
| Analog sense current ratio K0 (IOUT/ISENSE) | K0 | 990 | 1600 | 2330 | | IOUT = 0.075 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 |
| Analog sense current ratio K1 (IOUT/ISENSE) | K1 | 860 | 1450 | 2000 | | IOUT = 0.25 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 |
| Analog sense current ratio K2 (IOUT/ISENSE) | K2 | 890 | 1140 | 1270 | | IOUT = 2 A; VSENSE = 1 V; Tj = -40°C to 150°C | 11 |
| Analog sense current ratio K3 (IOUT/ISENSE) | K3 | 900 | 1080 | 1300 | | IOUT = 6 A; VSENSE = 4 V; Tj = -40°C to 150°C | 11 |
| Analog sense current drift dK0/K0 | dK0/K0 | -20 | | 20 | % | IOUT = 0.075 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 |
| Analog sense current drift dK1/K1 | dK1/K1 | -30 | | 30 | % | IOUT = 0.25 A; VSENSE = 0.5 V; Tj = -40°C to 150°C | 11 |
| Analog sense current drift dK2/K2 | dK2/K2 | -14 | | 14 | % | IOUT = 2 A; VSENSE = 1 V; Tj = -40°C to 150°C | 11 |
| Analog sense current drift dK3/K3 | dK3/K3 | -14 | | 14 | % | IOUT = 6 A; VSENSE = 4 V; Tj = -40°C to 150°C | 11 |
| Max analog sense output voltage | VSENSE | | | 5 | V | IOUT = 2 A; RSENSE = 10 kΩ | 11 |
| Analog sense leakage current | ISENSE0 | 0 | | 5 | µA | IOUT = 0 A; VSENSE = 0 V; VIN = 0 V; Tj = -40°C to 150°C | 12 |
## CAD (KiCad official)
- Symbol: `VNH5200ASTR-E`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SO-16 (KiCad packages3D, STEP)
- 3D model files: `vnh5200astr-e-etched.step` / `vnh5200astr-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vnh5200astr-e.step` / `vnh5200astr-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927145314172929) (31 pp, sha256 `8048a96dfd83d4f5`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/vnh5200astr-e-datasheet.pdf)