main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers viper28hn: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 7 pins · Ray
viper28hn-etched.glb Publish 0.1.0 · Ray
viper28hn-etched.step viper28hn: factory component page (tier=mfr) · Ray
viper28hn-hero.glb viper28hn: hero GLB from the etched model (keeps the MPN mark) · Ray
viper28hn-hero.overlay.json Publish 0.1.0 · Ray
viper28hn.glb Publish 0.1.0 · Ray
viper28hn.kicad_mod Publish 0.1.0 · Ray
viper28hn.kicad_sym Publish 0.1.0 · Ray
viper28hn.lbr Publish 0.1.0 · Ray
viper28hn.step Publish 0.1.0 · Ray

VIPER28HN

STMicroelectronics · AC-DC Controllers & Regulators · DIP-7

VIPER28HN from STMicroelectronics, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground and the source of the power section.
2 VDD power_in Supply voltage of the control section (operating range 8.5 V to 23.5 V after turn-on), which also provides the charging current of the external capacitor during startup.
3 CONT input Control pin that reduces the current limit setpoint (IDlim) via an external resistor to ground and monitors output voltage for overvoltage protection (VOVP threshold 3 V typ).
4 FB input Control input for duty cycle control with internal bias current source; a voltage below VFBbm (0.6 V typ) activates burst mode and a level near VFBlin (3.5 V typ) indicates approaching the cycle-by-cycle overcurrent setpoint.
5 EPT passive Connection for an external capacitor setting the extra power timer; must be connected to GND if the function is not used.
7 DRAIN passive High-voltage drain pin (800 V max) that also supplies the switched startup bias current and is connected to the metal frame for heat dissipation.
8 DRAIN passive High-voltage drain pin (800 V max) that also supplies the switched startup bias current and is connected to the metal frame for heat dissipation.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DIP-7
Category Power Supply Chip
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Drain-to-source (ground) voltage VDRAIN 800 V 7
Pulse drain current IDRAIN 3 A limited by TJ = 150 °C 7
Control input pin voltage VCONT -0.3 6 V 7
Feedback voltage VFB -0.3 5.5 V 7
EPT input pin voltage VEPT -0.3 5 V 7
Supply voltage (self limited) VDD -0.3 V IDD = 25 mA 7
Input current IDD 25 mA 7
Power dissipation (DIP-7) PTOT 1 W TA < 40 °C (DIP-7) 7
Operating junction temperature range TJ -40 150 °C 7
Storage temperature TSTG -55 150 °C 7
Human body model ESD HBM(ESD) 2 kV Human body model 7
Charge device mode ESD ESD(CDM) 1.5 kV Charge device mode 7
Thermal resistance junction pin (DIP7) RthJP 35 °C/W dissipated power = 1 W 7
Thermal resistance junction ambient (DIP7) RthJA 110 °C/W dissipated power = 1 W 7
Avalanche current IAS 1 A Repetitive or non repetitive (pulse width limited by TJmax) 7
Single pulse avalanche energy EAS 3 mJ ID = IAS, VDS=100 V, starting TJ = 25°C 7
Breakdown voltage VBVDSS 800 V IDRAIN = 1 mA, VFB = GND, TJ = 25 °C 8
OFF-state drain current IOFF 60 µA VDRAIN = max rating,VFB = GND, TJ = 25°C 8
Drain-source on-state resistance RDS(on) 7 Ω IDRAIN = 0.4 A, VFB = 3 V, VEPT = GND, TJ = 25 °C 8
Drain-source on-state resistance RDS(on) 14 Ω IDRAIN = 0.4 A, VFB = 3 V, VEPT = GND, TJ = 125 °C 8
Drain-source start voltage VDRAIN_START 60 80 100 V 8
Startup charging current IDDch1 -2 -3 -4 mA VDRAIN = 120 V, VEPT = GND, VFB = GND, VDD = 4 V 8
Restart charging current (after fault) IDDch2 -0.4 -0.6 -0.8 mA VDRAIN = 120 V, VEPT = GND, VFB = GND, VDD = 5 V 8
VDD operating voltage range VDD 8.5 23.5 V After turn-on 8
VDD clamp voltage VDDclamp 23.5 V IDD = 20 mA 8
VDD startup threshold VDDon 13 14 15 V VDRAIN = 120 V, VEPT = GND, VFB = GND 8
VDD undervoltage shutdown threshold VDDoff 7.5 8 8.5 V 8
VDD restart voltage threshold VDD(RESTART) 4 4.5 5 V VDRAIN = 120 V, VEPT = GND, VFB = GND 8
Operating supply current, not switching IDD0 0.9 mA VFB = GND, FOSC = 0 kHz, VEPT = GND, VDD = 10 V 8
Operating supply current, switching (115 kHz) IDD1 3.5 mA VDRAIN = 120 V,FOSC = 115 kHz 8
Operating supply current, with protection tripping IDD_FAULT 400 uA VDD = 10 V 8
Operating supply current with VDD < VDD_OFF IDD_OFF 270 uA VDD = 7 V 8
Overload shutdown threshold VFBolp 4.5 4.8 5.2 V 9
Overload detection threshold VFBlin 3.2 3.5 3.7 V 9
Burst mode threshold VFBbm 0.54 0.6 0.66 V Voltage falling 9
Feedback sourced current IFB1 -150 -200 -280 uA VFB = 0.3 V 9
Low-level clamp voltage (CONT) VCONT_l 0.4 0.5 0.6 V ICONT = -100 µA 9
High-level clamp voltage (CONT) VCONT_h 5 5.5 6 V ICONT = 1 mA 9
Max drain current limitation IDlim 0.75 0.8 0.85 A VFB = 4 V, ICONT = -10 µA, TJ = 25 °C 9
Soft-start time tSS 7.6 8.5 9.4 ms 9
Minimum turn-on time TON_MIN 220 370 480 ns 9
Oscillator frequency (H type) FOSC 103 115 127 kHz VFB = 1 V 9
Modulation depth (H type) FD -8 8 kHz VIPER28H 9
Modulation frequency FM 200 250 300 Hz 9
Maximum duty cycle DMAX 70 80 % 9
Second overcurrent threshold IDMAX 1.2 A 9
Overvoltage protection threshold VOVP 2.7 3 3.3 V 9
EPT shutdown threshold VEPT(STOP) 3.6 4 4.4 V ICONT < -10 µA 10
EPT restart threshold VEPT(RESTART) 0.4 0.6 0.8 V 10
EPT sink/source current IEPT 4 5 6 µA 10
Thermal shutdown temperature TSD 150 160 °C 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper Note: The copper area for heat dissipation has to be designed under the DRAIN pins. 6

CAD (KiCad official)

  • Symbol: VIPER28HN
  • Footprint: Package_DIP:DIP-8-N6_W7.62mm
  • 3D model: DIP-7 (KiCad packages3D, STEP)
  • 3D model files: viper28hn-etched.step / viper28hn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); viper28hn.step / viper28hn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (31 pp, sha256 77f7390609cc2adb, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF