main
Ray
Publish 0.1.0
112fcb9
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190
{
"slug": "viper28hn",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics AC-DC Controllers & Regulators, DIP-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"viper28hn",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"viper28hn.kicad_sym",
"viper28hn.kicad_mod",
"viper28hn.glb",
"viper28hn.step",
"viper28hn.lbr",
"docs/hero.png",
"docs/viper28hn-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"viper28hn-hero.glb",
"viper28hn-hero.overlay.json",
"viper28hn-etched.glb"
],
"component": {
"mpn": "VIPER28HN",
"manufacturer": "STMicroelectronics",
"package": "DIP-7",
"pin_count": 7,
"category": "Power Supply Chip",
"subcategory": "AC-DC Controllers & Regulators",
"datasheet": "https://www.st.com/resource/en/datasheet/viper28hn.pdf",
"parts": {
"symbol": "viper28hn.kicad_sym",
"footprint": "viper28hn.kicad_mod",
"model_3d": "viper28hn-hero.glb",
"model_3d_plain": "viper28hn-etched.glb",
"model_3d_step": "viper28hn-etched.step",
"model_3d_step_plain": "viper28hn.step",
"lbr": "viper28hn.lbr"
},
"distributor_links": {
"lcsc": "C2970608",
"digikey": "497-8391-5-ND",
"mouser": "511-VIPER28HN"
},
"distributor_check": {
"checked_at": "2026-10-31T01:18:20Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-8391-5-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "511-VIPER28HN",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Device ground and the source of the power section."
},
{
"number": "2",
"name": "VDD",
"type": "power_in",
"description": "Supply voltage of the control section (operating range 8.5 V to 23.5 V after turn-on), which also provides the charging current of the external capacitor during startup."
},
{
"number": "3",
"name": "CONT",
"type": "input",
"description": "Control pin that reduces the current limit setpoint (IDlim) via an external resistor to ground and monitors output voltage for overvoltage protection (VOVP threshold 3 V typ)."
},
{
"number": "4",
"name": "FB",
"type": "input",
"description": "Control input for duty cycle control with internal bias current source; a voltage below VFBbm (0.6 V typ) activates burst mode and a level near VFBlin (3.5 V typ) indicates approaching the cycle-by-cycle overcurrent setpoint."
},
{
"number": "5",
"name": "EPT",
"type": "passive",
"description": "Connection for an external capacitor setting the extra power timer; must be connected to GND if the function is not used."
},
{
"number": "7",
"name": "DRAIN",
"type": "passive",
"description": "High-voltage drain pin (800 V max) that also supplies the switched startup bias current and is connected to the metal frame for heat dissipation."
},
{
"number": "8",
"name": "DRAIN",
"type": "passive",
"description": "High-voltage drain pin (800 V max) that also supplies the switched startup bias current and is connected to the metal frame for heat dissipation."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text+vision",
"consensus_model": "claude-opus-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Table 3 lists only SO16N pin numbers; DIP7 numbers were read from the Figure 3 drawing. Pin 6 is abs; Pin types for EPT and DRAIN are chosen as passive (external capacitor node and high-voltage MOSFET d",
"vision extraction: provenance cannot be text-verified; needs consensus"
],
"pages_sent": 31,
"cost_usd": 0.7365,
"at": "2026-10-31T01:17:47"
},
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/viper28hn.pdf",
"pages": 31,
"sha256": "77f7390609cc2adb",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 7,
"described": 7,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "viper28hn.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.62,
10.16,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.127,
"footprint_binding": "identity",
"sha256": "f90bd1fa5f010bc999f2dd88ca613ee145644353e91e90fc2564259080330cbf",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "viper28hn-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.62,
10.16,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.127,
"footprint_binding": "identity",
"sha256": "cc1e9d7131535506b587899eb1dc216584eadb1b658643de0339840e84eb8e16",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}