main
Ray ucc3895dwtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 0dbd9e2
{
  "schema_version": 1,
  "type": "component",
  "slug": "ucc3895dwtr",
  "title": "UCC3895DWTR",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc3895dwtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UCC3895DWTR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2895",
    "parts": {
      "symbol": "ucc3895dwtr.kicad_sym",
      "footprint": "ucc3895dwtr.kicad_mod",
      "model_3d": "ucc3895dwtr-etched.glb",
      "model_3d_plain": "ucc3895dwtr.glb",
      "model_3d_step": "ucc3895dwtr-etched.step",
      "model_3d_step_plain": "ucc3895dwtr.step",
      "lbr": "ucc3895dwtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C24118"
    },
    "pins": [
      {
        "number": "1",
        "name": "EAN",
        "type": "input",
        "description": "Inverting input to the error amplifier; keep voltage below 3.6 V for proper operation."
      },
      {
        "number": "2",
        "name": "EAOUT",
        "type": "output",
        "description": "Error amplifier output; internally connected to non-inverting input of PWM comparator and no-load comparator; internally clamped to soft-start voltage."
      },
      {
        "number": "3",
        "name": "RAMP",
        "type": "input",
        "description": "Inverting input of the PWM comparator; receives CT waveform in voltage/average current-mode control or current signal with slope compensation in peak current-mode control."
      },
      {
        "number": "4",
        "name": "REF",
        "type": "power_out",
        "description": "5-V ±1.2% precision voltage reference output supplying up to 5 mA; bypass with 0.1-μF low-ESR low-ESL capacitor to GND; do not use more than 4.7 μF total capacitance."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground for all internal circuits except output stages."
      },
      {
        "number": "6",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Bidirectional oscillator synchronization pin; functions as clock output when used as output or overrides internal oscillator when used as input with threshold 2.05-2.4 V; can be pulled to GND with 3.9 kΩ minimum."
      },
      {
        "number": "7",
        "name": "CT",
        "type": "input",
        "description": "Oscillator timing capacitor; oscillator charges CT via programmed current generating sawtooth waveform with peak 2.35 V; supports 100-880 pF range."
      },
      {
        "number": "8",
        "name": "RT",
        "type": "input",
        "description": "Oscillator timing resistor for programming switching frequency; valid range 40-120 kΩ with voltage maintained at 2.9-3.1 V nominal."
      },
      {
        "number": "9",
        "name": "DELAB",
        "type": "input",
        "description": "Delay-programming pin for dead time between OUTA and OUTB complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL)."
      },
      {
        "number": "10",
        "name": "DELCD",
        "type": "input",
        "description": "Delay-programming pin for dead time between OUTC and OUTD complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL)."
      },
      {
        "number": "11",
        "name": "ADS",
        "type": "input",
        "description": "Adaptive delay-set pin; sets ratio between maximum and minimum programmed output delay dead time; must be 0-2.5 V and ≤ CS voltage for proper operation."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Current sense input for cycle-by-cycle current limiting and overcurrent protection; peak current threshold 1.9-2.1 V, overcurrent threshold 2.4-2.6 V; delay to output 75-110 ns."
      },
      {
        "number": "13",
        "name": "OUTD",
        "type": "output",
        "description": "100-mA complementary MOS driver output; phase-shifted relative to OUTB; optimized to drive MOSFET gate driver circuits or transformers; high-level 250-400 mV, low-level 150-250 mV at 10 mA."
      },
      {
        "number": "14",
        "name": "OUTC",
        "type": "output",
        "description": "100-mA complementary MOS driver output; phase-shifted relative to OUTA; optimized to drive MOSFET gate driver circuits or transformers; high-level 250-400 mV, low-level 150-250 mV at 10 mA."
      },
      {
        "number": "15",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input pin; operating range 10-16.5 V; bypass with minimum 1-μF low-ESR low-ESL capacitor to PGND; additional 10-μF capacitor between VDD and PGND recommended."
      },
      {
        "number": "16",
        "name": "PGND",
        "type": "power_in",
        "description": "Output stage ground providing ground reference for high-current output drivers; must be electrically tied to GND with low-impedance connection."
      },
      {
        "number": "17",
        "name": "OUTB",
        "type": "output",
        "description": "100-mA complementary MOS driver output; fully complementary to OUTA operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."
      },
      {
        "number": "18",
        "name": "OUTA",
        "type": "output",
        "description": "100-mA complementary MOS driver output; drives one half-bridge circuit in external power stage; operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."
      },
      {
        "number": "19",
        "name": "SS/DISB",
        "type": "input",
        "description": "Soft-start and disable pin combining two independent functions; sources current ~35 μA during soft-start mode and sinks ~350 μA during soft-stop (overcurrent) mode; threshold 0.44-0.56 V."
      },
      {
        "number": "20",
        "name": "EAP",
        "type": "input",
        "description": "Non-inverting input to the error amplifier; keep voltage below 3.6 V for proper operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 61,
        "cost_usd": 0.5075,
        "at": "2026-09-22T21:11:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ucc2895",
        "pages": 61,
        "sha256": "839591a78c6304d9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc3895dwtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc3895dwtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3c0718629e37fe0f95038d8e4aeea5c37181e830b38e811e06addad47d658456",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-20-300mil",
      "Category": "Power Management (PMIC)",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ucc3895dwtr"
  ],
  "discovery_pitch": "UCC3895DWTR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc3895dwtr.kicad_sym",
    "ucc3895dwtr.kicad_mod",
    "ucc3895dwtr.glb",
    "ucc3895dwtr.step",
    "ucc3895dwtr.lbr",
    "docs/hero.png",
    "docs/ucc3895dwtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T13:40:42.309Z"
}