← Commit history

ucc3895dwtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·0dbd9e2710 · ·parent e601592
2 files changed +94−14
package.json+52−12
@@ -71,7 +71,7 @@         "number": "4",         "name": "REF",         "type": "power_out",-        "description": "5-V \u00b11.2% precision voltage reference output supplying up to 5 mA; bypass with 0.1-\u03bcF low-ESR low-ESL capacitor to GND; do not use more than 4.7 \u03bcF total capacitance."+        "description": "5-V ±1.2% precision voltage reference output supplying up to 5 mA; bypass with 0.1-μF low-ESR low-ESL capacitor to GND; do not use more than 4.7 μF total capacitance."       },       {         "number": "5",@@ -83,7 +83,7 @@         "number": "6",         "name": "SYNC",         "type": "bidirectional",-        "description": "Bidirectional oscillator synchronization pin; functions as clock output when used as output or overrides internal oscillator when used as input with threshold 2.05-2.4 V; can be pulled to GND with 3.9 k\u03a9 minimum."+        "description": "Bidirectional oscillator synchronization pin; functions as clock output when used as output or overrides internal oscillator when used as input with threshold 2.05-2.4 V; can be pulled to GND with 3.9 kΩ minimum."       },       {         "number": "7",@@ -95,25 +95,25 @@         "number": "8",         "name": "RT",         "type": "input",-        "description": "Oscillator timing resistor for programming switching frequency; valid range 40-120 k\u03a9 with voltage maintained at 2.9-3.1 V nominal."+        "description": "Oscillator timing resistor for programming switching frequency; valid range 40-120 kΩ with voltage maintained at 2.9-3.1 V nominal."       },       {         "number": "9",         "name": "DELAB",         "type": "input",-        "description": "Delay-programming pin for dead time between OUTA and OUTB complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25\u00d710\u207b\u00b9\u00b2 \u00d7 R_DEL / V_DEL)."+        "description": "Delay-programming pin for dead time between OUTA and OUTB complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL)."       },       {         "number": "10",         "name": "DELCD",         "type": "input",-        "description": "Delay-programming pin for dead time between OUTC and OUTD complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25\u00d710\u207b\u00b9\u00b2 \u00d7 R_DEL / V_DEL)."+        "description": "Delay-programming pin for dead time between OUTC and OUTD complementary outputs; external resistor sets delay per formula tDELAY = 25 ns + (25×10⁻¹² × R_DEL / V_DEL)."       },       {         "number": "11",         "name": "ADS",         "type": "input",-        "description": "Adaptive delay-set pin; sets ratio between maximum and minimum programmed output delay dead time; must be 0-2.5 V and \u2264 CS voltage for proper operation."+        "description": "Adaptive delay-set pin; sets ratio between maximum and minimum programmed output delay dead time; must be 0-2.5 V and ≤ CS voltage for proper operation."       },       {         "number": "12",@@ -137,7 +137,7 @@         "number": "15",         "name": "VDD",         "type": "power_in",-        "description": "Power supply input pin; operating range 10-16.5 V; bypass with minimum 1-\u03bcF low-ESR low-ESL capacitor to PGND; additional 10-\u03bcF capacitor between VDD and PGND recommended."+        "description": "Power supply input pin; operating range 10-16.5 V; bypass with minimum 1-μF low-ESR low-ESL capacitor to PGND; additional 10-μF capacitor between VDD and PGND recommended."       },       {         "number": "16",@@ -149,19 +149,19 @@         "number": "17",         "name": "OUTB",         "type": "output",-        "description": "100-mA complementary MOS driver output; fully complementary to OUTA operating at \u224850% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."+        "description": "100-mA complementary MOS driver output; fully complementary to OUTA operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."       },       {         "number": "18",         "name": "OUTA",         "type": "output",-        "description": "100-mA complementary MOS driver output; drives one half-bridge circuit in external power stage; operating at \u224850% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."+        "description": "100-mA complementary MOS driver output; drives one half-bridge circuit in external power stage; operating at ≈50% duty cycle and one-half oscillator frequency; high-level 250-400 mV, low-level 150-250 mV at 10 mA."       },       {         "number": "19",         "name": "SS/DISB",         "type": "input",-        "description": "Soft-start and disable pin combining two independent functions; sources current ~35 \u03bcA during soft-start mode and sinks ~350 \u03bcA during soft-stop (overcurrent) mode; threshold 0.44-0.56 V."+        "description": "Soft-start and disable pin combining two independent functions; sources current ~35 μA during soft-start mode and sinks ~350 μA during soft-stop (overcurrent) mode; threshold 0.44-0.56 V."       },       {         "number": "20",@@ -202,6 +202,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ucc3895dwtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.3,+          12.8,+          2.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ucc3895dwtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.3,+          12.8,+          2.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3c0718629e37fe0f95038d8e4aeea5c37181e830b38e811e06addad47d658456",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -187,7 +187,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ucc3895dwtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.3,+          12.8,+          2.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ucc3895dwtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.3,+          12.8,+          2.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3c0718629e37fe0f95038d8e4aeea5c37181e830b38e811e06addad47d658456",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -235,4 +275,4 @@     "public": true   },   "updated_at": "2026-09-25T13:40:42.309Z"-}\ No newline at end of file+}