main
Ray ucc2897apwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) dfee875
{
  "slug": "ucc2897apwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers And Regulators, TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc2897apwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc2897apwr.kicad_sym",
    "ucc2897apwr.kicad_mod",
    "ucc2897apwr.glb",
    "ucc2897apwr.step",
    "ucc2897apwr.lbr",
    "docs/hero.png",
    "docs/ucc2897apwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "UCC2897APWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc2897a.pdf",
    "parts": {
      "symbol": "ucc2897apwr.kicad_sym",
      "footprint": "ucc2897apwr.kicad_mod",
      "model_3d": "ucc2897apwr-etched.glb",
      "model_3d_plain": "ucc2897apwr.glb",
      "model_3d_step": "ucc2897apwr-etched.step",
      "model_3d_step_plain": "ucc2897apwr.step",
      "lbr": "ucc2897apwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C54444"
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Connect to input-power rail (maximum 120 V) to provide high-voltage JFET start-up current until bootstrap bias becomes available."
      },
      {
        "number": "2",
        "name": "N/C",
        "type": "unconnected",
        "description": "No internal connection; leave floating."
      },
      {
        "number": "3",
        "name": "RDEL",
        "type": "input",
        "description": "Program turn-on delay for gate-drive outputs via resistor to GND; delay time follows equation tDEL = 11.1×10⁻¹² × RDEL + 15×10⁻⁹ seconds."
      },
      {
        "number": "4",
        "name": "RON",
        "type": "input",
        "description": "Program internal timing-capacitor charge current via resistor to GND; determines on-time and switching frequency along with ROFF."
      },
      {
        "number": "5",
        "name": "ROFF",
        "type": "input",
        "description": "Program internal timing-capacitor discharge current via resistor to GND; determines off-time and maximum duty cycle along with RON."
      },
      {
        "number": "6",
        "name": "VREF",
        "type": "power_out",
        "description": "5-V regulated reference voltage output (up to 5 mA); bypass to GND with 0.1-µF capacitor for stability and noise filtering."
      },
      {
        "number": "7",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Bidirectional synchronization input/output; accepts external clock synchronization signal or outputs internal oscillator timing reference when standalone."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground reference for control circuitry; connect directly to PGND via single short trace to minimize control noise coupling."
      },
      {
        "number": "9",
        "name": "CS",
        "type": "input",
        "description": "Peak current-sense input for current-mode control and cycle-by-cycle current limiting at 0.5-V threshold; requires RC filter between current-sense resistor and pin."
      },
      {
        "number": "10",
        "name": "RSLOPE",
        "type": "input",
        "description": "Program slope-compensation current amplitude via resistor to GND; compensation slope is proportional to internal timing-capacitor waveform during OUT high periods."
      },
      {
        "number": "11",
        "name": "FB",
        "type": "input",
        "description": "Error signal feedback from external optocoupler or error amplifier with control range 2.5 V (minimum duty) to 4.5 V (maximum duty)."
      },
      {
        "number": "12",
        "name": "SS/SD",
        "type": "input",
        "description": "Soft-start and shutdown capacitor pin; charged from 2.5 V to 4.5 V by internal current source during soft-start and discharged to 0.5 V for shutdown."
      },
      {
        "number": "13",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground current return for high-current drivers OUT and AUX; must connect to GND pin with single short trace."
      },
      {
        "number": "14",
        "name": "AUX",
        "type": "output",
        "description": "Gate driver output for auxiliary P-channel clamp MOSFET (active-low logic) with 2-A source and 2-A sink current capability."
      },
      {
        "number": "15",
        "name": "OUT",
        "type": "output",
        "description": "Gate driver output for main N-channel MOSFET (active-high logic) with 2-A source and 2-A sink current capability; connect 10-kΩ resistor to PGND."
      },
      {
        "number": "16",
        "name": "PVDD",
        "type": "power_in",
        "description": "Supply for output drivers; bypass to PGND with 10-µF capacitor at device."
      },
      {
        "number": "17",
        "name": "VDD",
        "type": "power_in",
        "description": "Primary power supply (8.5 V to 16 V) for gate drivers and 5-V bias regulator; bypass to PGND with 1-µF capacitor at device."
      },
      {
        "number": "18",
        "name": "LINEUV",
        "type": "input",
        "description": "Line undervoltage monitor input (1.27-V threshold, programmable hysteresis) for bulk voltage monitoring via external resistor divider."
      },
      {
        "number": "19",
        "name": "LINEOV",
        "type": "input",
        "description": "Line overvoltage monitor input (1.27-V threshold, programmable hysteresis) that disables outputs immediately upon threshold crossing."
      },
      {
        "number": "20",
        "name": "N/C",
        "type": "unconnected",
        "description": "No internal connection; leave floating."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 3 nomenclature: Datasheet shows 'RTDEL' in the Pin Functions table (page 4) but all other refere"
        ],
        "pages_sent": 50,
        "cost_usd": 0.4964,
        "at": "2026-09-23T07:05:17"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc2897a.pdf",
        "pages": 50,
        "sha256": "fb294981fe94b45c",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc2897apwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc2897apwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9b82a19ad61686c449bf00716f6ce29a70f7b19f1f41f17fb853e550e125d8fb",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}