main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc2894pw: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ucc2894pw-etched.glb Publish 0.1.0 · Ray
ucc2894pw-etched.step ucc2894pw: factory component page (tier=mfr) · Ray
ucc2894pw-hero.glb ucc2894pw: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc2894pw-hero.overlay.json Publish 0.1.0 · Ray
ucc2894pw.glb Publish 0.1.0 · Ray
ucc2894pw.kicad_mod Publish 0.1.0 · Ray
ucc2894pw.kicad_sym Publish 0.1.0 · Ray
ucc2894pw.lbr Publish 0.1.0 · Ray
ucc2894pw.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

UCC2894PW

Texas Instruments · DC-DC Controllers · TSSOP-16

UCC2894PW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RTDEL input A resistor from this pin to GND programs the turn-on delay of the two gate drive outputs (OUT and AUX) for active-clamp resonant transitions, with the same delay for both transitions per the datasheet tDEL equation.
2 RTON input A resistor from this pin to GND sets the charge current of the internal timing capacitor, and together with RTOFF sets the switching frequency and maximum duty cycle, with the pin held at approximately 2.5 V internally.
3 RTOFF input A resistor from this pin to GND sets the discharge current of the internal timing capacitor, and together with RTON sets the switching period and DMAX, with the pin held at approximately 2.5 V internally.
4 VREF power_in This 5-V reference can supply an external load of up to 5 mA and needs a ceramic bypass to GND (recommended 0.22 µF, minimum 0.022 µF, maximum about 22 µF), with VDD capacitance at least 10 times that on VREF.
5 SYNC input This unidirectional input synchronizes the internal oscillator, requires a minimum pulse width of about 50 ns, and the synchronizing frequency must be higher than the free-running oscillator frequency.
6 GND power_in This is the fundamental analog ground reference for the PWM control circuitry and must be connected directly to PGND (pin 11) at the device.
7 CS input This direct input to the PWM and current-limit comparators reaches the pulse-by-pulse limit at approximately 1.27 V for the UCC2894, and it must be fed through a small RC filter rather than connected directly across the sense resistor.
8 RSLOPE input A resistor from this pin to GND sets the amplitude of the internal slope-compensation current, which is proportional to the timing-capacitor ramp voltage across RSLOPE.
9 FB input This input receives the control voltage from an external error amplifier or optocoupler, with a useful range of approximately 1.25 V to 4.5 V and an external pull-up resistor to VREF required.
10 SS/SD input A capacitor from this pin to GND sets the soft-start time, charged by a current of 0.43 × IRTON to about 5 V, and is discharged by a current equal to IRTON during faults, with a discharge/shutdown threshold of 0.4 V to 0.6 V.
11 PGND power_in This pin is the dedicated current return for the high-current OUT and AUX drivers and should be kept short and low-impedance, with a low-impedance external connection to GND (pin 6) required.
12 AUX output This high-current gate drive output drives the auxiliary clamp switch, which for the UCC2894 is an active-high drive for an N-channel device with 2-A source and 2-A sink turn-on/turn-off current.
13 OUT output This high-current output drives the main N-channel MOSFET with 2-A source and 2-A sink current, and a 10-kΩ resistor to PGND is recommended.
14 VDD power_in This is the device supply, with a recommended operating range of 8.5 V to 16.0 V (12.0 V nominal), an absolute maximum of 16.5 V at IDD below 10 mA, and at least 1 µF of ceramic capacitance directly from VDD to PGND.
15 LINEUV input This input enables and disables the converter by monitoring the bulk input against a 1.27 V threshold, with hysteresis set by an internal current source that is programmed through RDEL.
16 LINEOV input For the UCC2894, this input provides the line overvoltage function against a 1.27 V threshold, with programmable hysteresis set by an internal current source that is programmed through RDEL.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Start-up current ISTARTUP 300 500 µA VDD < VUVLO 3
Operating supply current IDD 2 3 mA VFB = 0 V, VCS = 0 V, Outputs not switching 3
Start threshold voltage 12.2 12.7 13.2 V 3
Minimum operating voltage after start 7.6 8 8.4 V 3
UVLO hysteresis 4.4 4.7 5 V 3
Line UV and Line OV voltage threshold VLINEUV 1.243 1.268 1.293 V 3
Line UV and Line OV hysteresis current ILINEHYS 11.8 12.5 14.5 µA 3
Soft-start charge current ISS -18.5 -10.5 µA RTON = 75 kΩ 3
Soft-start discharge current ISS 10.5 18.5 µA RTON = 75 kΩ 3
VSS/SD discharge/shutdown threshold voltage VSS/SD 0.4 0.5 0.6 V 3
Reference voltage VREF 4.85 5 5.15 V TJ = 25°C 4
Reference voltage VREF 4.75 5 5.25 V 0 A < IREF < 5 mA, over temperature 4
Short circuit current ISC -20 -11 -8 mA REF = 0 V, TJ = 25°C 4
Internal slope compensation slope m -10 10 % FB = High; relative to RCS/RSLOPE 4
Oscillator frequency fOSC 237 250 263 kHz TJ = 25°C 4
Oscillator frequency total variation fOSC 225 270 kHz Total variation −40 °C < TJ 125°C; 8.5 V < 14.5 V 4
SYNC threshold voltage VSYNCH 1.6 2.3 3 V 4
Maximum duty cycle 66 70 74 % 4
PWM offset 0.43 0.5 0.61 V CS = 0 V 4
Current sense level shift voltage VLVL 0.4 0.5 0.6 V 4
Maximum voltage error (clamped) VERR(max) 4.8 5 5.2 V 4
Current sense threshold voltage (UCC2892/UCC2894) VCS 1.23 1.27 1.31 V UCC2892/UCC2894 4
Rise time tR 19 28 ns CLOAD = 2 nF 5
Fall time tF 14 23 ns CLOAD = 2 nF 5
Line input voltage VIN 18 110 V 2
Supply voltage VDD 8.5 12 16 V 2
Operating junction temperature TJ -40 105 °C 2
Reference bypass capacitance CREF 0.1 1 µF 2
Line input voltage VIN 120 V 2
Supply voltage VDD 16.5 V IDD < 10 mA 2
Analog inputs FB, CS, SYNC, LINEOV, LINEUV -0.3 6 V Max (VREF + 0.3), not to exceed 6 V 2
Output source current (peak) IO_SOURCE 2.5 A OUT, AUX 2
Output sink current (peak) IO_SINK -2.5 A OUT, AUX 2
Operating junction temperature range TJ -55 150 °C 2
Storage temperature Tstg -65 150 °C 2
ESD rating, human body model 2000 V Human body model (HBM) 2
ESD rating, charged device model 500 V Charged device model (CDM) 2
Lead temperature Tsol 300 °C 1,6 mm (1/16 inch) from case for 10 seconds 2
Thermal resistance junction-to-case (TSSOP-16 PW) θjc 33.6 35 °C/W 3
Thermal resistance junction-to-ambient (TSSOP-16 PW) θja 108.4 147 °C/W 0 LFM 3

CAD (KiCad official)

  • Symbol: UCC2894PW
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: ucc2894pw-etched.step / ucc2894pw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc2894pw.step / ucc2894pw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 0b123b68deef52c5, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF