main
Ray
Publish 0.1.0
98f6f45
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296
{
"slug": "ucc28782cdrtwr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments , WQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"ic",
"ucc28782cdrtwr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ucc28782cdrtwr.kicad_sym",
"ucc28782cdrtwr.kicad_mod",
"ucc28782cdrtwr.glb",
"ucc28782cdrtwr.step",
"ucc28782cdrtwr.lbr",
"docs/hero.png",
"docs/ucc28782cdrtwr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ucc28782cdrtwr-hero.glb",
"ucc28782cdrtwr-hero.overlay.json",
"ucc28782cdrtwr-etched.glb"
],
"component": {
"mpn": "UCC28782CDRTWR",
"manufacturer": "Texas Instruments",
"package": "WQFN-24(4x4)",
"pin_count": 25,
"category": "IC",
"subcategory": "IC",
"datasheet": "https://www.ti.com/lit/ds/symlink/ucc28782.pdf",
"parts": {
"symbol": "ucc28782cdrtwr.kicad_sym",
"footprint": "ucc28782cdrtwr.kicad_mod",
"model_3d": "ucc28782cdrtwr-hero.glb",
"model_3d_plain": "ucc28782cdrtwr-etched.glb",
"model_3d_step": "ucc28782cdrtwr-etched.step",
"model_3d_step_plain": "ucc28782cdrtwr.step",
"lbr": "ucc28782cdrtwr.lbr"
},
"distributor_links": {
"lcsc": "C5219050",
"digikey": "296-UCC28782CDRTWRTR-ND",
"mouser": "595-UCC28782CDRTWR"
},
"distributor_check": {
"checked_at": "2026-10-27T03:39:30Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-UCC28782CDRTWRTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-UCC28782CDRTWR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "FLT",
"type": "input",
"description": "Fault input that trips if pulled above 4.5 V or below 0.5 V, with a 50-µA source for an NTC to AGND (50-µs fault delay) or a divider for line-OVP sensing (750-µs fault delay)."
},
{
"number": "2",
"name": "RTZ",
"type": "input",
"description": "A resistor to AGND programs the adaptive delay from the high-side clamp switch turn-off to the low-side switch turn-on, and parasitic capacitance on this pin must be minimized."
},
{
"number": "3",
"name": "RDM",
"type": "input",
"description": "A resistor to AGND programs the synthesized demagnetization time that controls the high-side switch on-time for ZVS, and parasitic capacitance on this pin must be minimized."
},
{
"number": "4",
"name": "IPC",
"type": "input",
"description": "Intelligent power control pin with a 50-µA current source into RIPC to AGND (or to CS) that programs the light-load peak current level and can disable a PFC controller."
},
{
"number": "5",
"name": "BUR",
"type": "input",
"description": "A resistor divider from REF to AGND sets the adaptive burst mode peak-current threshold, with a 2.7-µA pull-up in LPM and a 5-µA pull-down in AAM."
},
{
"number": "6",
"name": "FB",
"type": "input",
"description": "Feedback current input presenting a 4.25-V output with 0 µA to 75 µA pulled out from full to zero power, with a 220-pF capacitor to REF recommended."
},
{
"number": "7",
"name": "REF",
"type": "power_out",
"description": "5-V reference output requiring a 0.22-µF ceramic bypass capacitor to AGND, with a limited external load current, and pulling it low shuts down PWM and initiates a VDD restart."
},
{
"number": "8",
"name": "AGND",
"type": "power_in",
"description": "Analog ground and return of the PWMH and RUN drivers, to which all analog control signals are returned."
},
{
"number": "9",
"name": "CS",
"type": "input",
"description": "Current-sense input coupled through a line-compensation resistor to set the peak primary current each cycle, with an OCP threshold of 1.2 V and an optional OTP function."
},
{
"number": "10",
"name": "RUN",
"type": "output",
"description": "Output that is high in the run state and low in start-up, wait and fault states, able to bias a digital isolator and gate driver for bias power management."
},
{
"number": "11",
"name": "PGND",
"type": "power_in",
"description": "Low-side ground return of the PWML driver, which can connect to the separate source pin of a GaN GIT, the Si FET source, or AGND for a GaN power IC with logic input."
},
{
"number": "12",
"name": "PWML",
"type": "output",
"description": "Low-side switch gate driver output with -0.5 A/+1.9 A capability, clamped to the P13 pin voltage."
},
{
"number": "13",
"name": "S13",
"type": "power_out",
"description": "Switched 13-V rail from P13 through an internal 2.8-Ω switch controlled by RUN, which must exceed 10 V to start PWML switching, with a 22-nF capacitor recommended."
},
{
"number": "14",
"name": "P13",
"type": "power_out",
"description": "Regulated 13-V output derived from VDD that drives the depletion MOSFET gate, requiring a 1-µF ceramic capacitor to AGND and a recommended 20-V Zener to AGND."
},
{
"number": "15",
"name": "PWMH",
"type": "output",
"description": "PWM output controlling the high-side clamp switch through an external high-voltage gate driver, clamped to the 5-V REF level."
},
{
"number": "16",
"name": "SWS",
"type": "input",
"description": "Switch-node sensing input for ZVS auto-tuning through a depletion MOSFET and a resistor higher than 500 Ω, connected to VDD internally during start-up."
},
{
"number": "17",
"name": "XCD",
"type": "input",
"description": "X-cap discharge input with 2-mA maximum discharge current and 6.5-V line zero-crossing threshold, redundant with pin 18 and connected to AGND if the function is unused."
},
{
"number": "18",
"name": "XCD",
"type": "input",
"description": "X-cap discharge input with 2-mA maximum discharge current and 6.5-V line zero-crossing threshold, redundant with pin 17 and connected to AGND if the function is unused."
},
{
"number": "19",
"name": "VDD",
"type": "power_in",
"description": "Controller bias power input and integrated boost converter output, requiring a hold-up capacitor to BGND, with 10-µF or 15-µF and at least 25-V rating recommended for wide-output designs."
},
{
"number": "20",
"name": "BGND",
"type": "power_in",
"description": "Boost converter return pin connected to the source of the internal 30-V boost switch."
},
{
"number": "21",
"name": "BSW",
"type": "passive",
"description": "Boost converter switch node at the drain of the internal 30-V boost switch, connected to the boost inductor and diode anode, or to BGND if the boost is unused."
},
{
"number": "22",
"name": "BIN",
"type": "input",
"description": "Boost converter input connected to the rectified auxiliary winding voltage, rated to 30 V, or tied to BGND if the boost converter is not needed."
},
{
"number": "23",
"name": "VS",
"type": "power_in",
"description": "Voltage-sensing input coupled to the transformer auxiliary winding through a resistor divider to monitor output and input voltages and switching edges."
},
{
"number": "24",
"name": "SET",
"type": "input",
"description": "Configures the controller for Si FETs when pulled high to REF or for GaN FETs when pulled low to AGND."
},
{
"number": "25",
"name": "EP",
"type": "power_in",
"description": "Thermal pad that must be connected to AGND."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: UCC28782CD uses pins 17 and 18 as XCD (X-cap discharge); on the UCC28782A the same locations are AGN"
],
"pages_sent": 63,
"cost_usd": 0.7119,
"at": "2026-10-27T03:38:45"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ucc28782.pdf",
"pages": 97,
"sha256": "44628a4d9f5dac3b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ucc28782cdrtwr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ucc28782cdrtwr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "bd1f5a22517236b113ec0a179625e7b480540d51b5c12da3c33048cc5e6fc16a",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}