main
Ray Publish 0.1.0 2df69a2
{
  "slug": "ucc28513n",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers & Regulators, PDIP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ucc28513n",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc28513n.kicad_sym",
    "ucc28513n.kicad_mod",
    "ucc28513n.glb",
    "ucc28513n.step",
    "ucc28513n.lbr",
    "docs/hero.png",
    "docs/ucc28513n-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc28513n-hero.glb",
    "ucc28513n-hero.overlay.json",
    "ucc28513n-etched.glb"
  ],
  "component": {
    "mpn": "UCC28513N",
    "manufacturer": "Texas Instruments",
    "package": "PDIP-20",
    "pin_count": 20,
    "category": "Power Supply Chip",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28513n.pdf",
    "parts": {
      "symbol": "ucc28513n.kicad_sym",
      "footprint": "ucc28513n.kicad_mod",
      "model_3d": "ucc28513n-hero.glb",
      "model_3d_plain": "ucc28513n-etched.glb",
      "model_3d_step": "ucc28513n-etched.step",
      "model_3d_step_plain": "ucc28513n.step",
      "lbr": "ucc28513n.lbr"
    },
    "distributor_links": {
      "lcsc": "C2861671",
      "digikey": "2156-UCC28513N-TI-ND",
      "mouser": "595-UCC28513N"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T00:18:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-UCC28513N-TI-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "595-UCC28513N",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VAOUT",
        "type": "bidirectional",
        "description": "Output of the PFC transconductance voltage amplifier, which operates between GND and 5.5 V maximum, sets the multiplier output current to zero below 1 V, and turns off the PFC gate drive when it falls below 0.33 V."
      },
      {
        "number": "2",
        "name": "RT",
        "type": "input",
        "description": "A resistor from RT to GND programs the oscillator frequency measured at CT_BUFF over a recommended 45 kΩ to 500 kΩ range (600 kHz to 65 kHz), and the pin is nominally 3 V dc with no capacitor allowed."
      },
      {
        "number": "3",
        "name": "VSENSE",
        "type": "input",
        "description": "Inverting input to the PFC transconductance voltage amplifier (the PFC feedback point), also connected to the OVP, ENABLE and UVLO2 comparators."
      },
      {
        "number": "4",
        "name": "D_MAX",
        "type": "input",
        "description": "Positive input that programs the PWM maximum duty cycle at GT2, linear between 0.09 and 0.90 duty ratio, and a voltage below 0.7 V sets DMAX to 0."
      },
      {
        "number": "5",
        "name": "CT_BUFF",
        "type": "output",
        "description": "Internally buffered 4-V amplitude PWM oscillator ramp output for slope compensation through a resistor to ISENSE2, and the internal buffer can drive a typical 500 µA resistive load."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground for the IC to which all measured voltages are referenced, and PWRGND must be externally connected to it."
      },
      {
        "number": "7",
        "name": "VERR",
        "type": "input",
        "description": "Feedback error voltage input for the PWM stage that is clamped to a maximum of 3 V, can demand 100% duty cycle at GT2, and has a typical 10 µA pull-up current."
      },
      {
        "number": "8",
        "name": "ISENSE2",
        "type": "input",
        "description": "Input for PWM stage current sense and peak current limit, with the peak limit threshold set to 1.3 V for peak current mode control."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply that should be connected to a stable source of at least 20 mA between 12 V and 17 V for normal operation, bypassed to GND with a 0.1 µF or larger ceramic capacitor."
      },
      {
        "number": "10",
        "name": "GT2",
        "type": "output",
        "description": "PWM stage MOSFET gate driver output, a 2-A peak source and 3-A peak sink totem pole driver."
      },
      {
        "number": "11",
        "name": "PWRGND",
        "type": "power_in",
        "description": "Ground for the GT1 and GT2 output drivers, which should be tied to GND externally via a single Kelvin connection."
      },
      {
        "number": "12",
        "name": "GT1",
        "type": "output",
        "description": "PFC stage MOSFET gate driver output, a 2-A peak source and 3-A peak sink totem pole driver that is disabled unless VCC is outside the UVLO region and VREF is on."
      },
      {
        "number": "13",
        "name": "SS2",
        "type": "input",
        "description": "Soft-start pin for the PWM stage where an internal 10.5-µA source charges the external capacitor to 3 V, and SS2 quickly discharges to ground on a disable command or UVLO2 dropout."
      },
      {
        "number": "14",
        "name": "PKLMT",
        "type": "input",
        "description": "Peak current limit input for the PFC stage with a 0 V threshold, using a resistor divider from VREF to the non-grounded side of the PFC current sense resistor."
      },
      {
        "number": "15",
        "name": "CAOUT",
        "type": "output",
        "description": "Output of the PFC wide-bandwidth current amplifier that commands the PFC PWM comparator duty cycle, with current loop compensation connected between CAOUT and MOUT."
      },
      {
        "number": "16",
        "name": "ISENSE1",
        "type": "input",
        "description": "Non-inverting input of the PFC stage current amplifier, connected through a resistor to the grounded side of the PFC current sense resistor, with a value equal to the MOUT resistor."
      },
      {
        "number": "17",
        "name": "MOUT",
        "type": "bidirectional",
        "description": "High-impedance multiplier current output and current amplifier input for the PFC stage, where a resistor to the non-grounded end of the PFC current sense resistor sets the power range."
      },
      {
        "number": "18",
        "name": "IAC",
        "type": "input",
        "description": "Multiplier input that senses the rectified AC line voltage through a resistor, with a recommended maximum IAC current of 500 µA."
      },
      {
        "number": "19",
        "name": "VFF",
        "type": "input",
        "description": "Voltage feedforward pin that sources an IAC/2 current through an external single-pole R/C filter to GND, and should be set to 1.4 V at low line."
      },
      {
        "number": "20",
        "name": "VREF",
        "type": "power_out",
        "description": "Precision 7.5-V reference output that can deliver over 10 mA, is current limited to 25 mA, and should be bypassed to GND with a 0.1 µF to 10 µF ceramic capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet is a family datasheet (UCC2851x/UCC2851x series) and the terminal table gives one pin ; Pin types were mapped to KiCad classes from the datasheet's I/O column: VCC and the grounds (GND, PW; Several descriptions were condensed from multi-sentence text in the datasheet into one sentence per "
        ],
        "pages_sent": 11,
        "cost_usd": 0.0784,
        "at": "2026-10-31T00:17:58"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc28513n.pdf",
        "pages": 42,
        "sha256": "0f7a7f654ed0116b",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc28513n.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          26.162,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ca359c9b9e0ce94efcb6c96866513f659eef6517d629ace3c4a0a779f6fd57bb",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc28513n-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          26.162,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "40f1d5b8d712e50a1c44d97771c5b5c790f03a0db8da9b00e6dac7f47ee3a14b",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}