main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc28513n: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ucc28513n-etched.glb Publish 0.1.0 · Ray
ucc28513n-etched.step ucc28513n: factory component page (tier=mfr) · Ray
ucc28513n-hero.glb ucc28513n: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc28513n-hero.overlay.json Publish 0.1.0 · Ray
ucc28513n.glb Publish 0.1.0 · Ray
ucc28513n.kicad_mod Publish 0.1.0 · Ray
ucc28513n.kicad_sym Publish 0.1.0 · Ray
ucc28513n.lbr Publish 0.1.0 · Ray
ucc28513n.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 20 pins · Ray

UCC28513N

Texas Instruments · AC-DC Controllers & Regulators · PDIP-20

UCC28513N from Texas Instruments, in a PDIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VAOUT bidirectional Output of the PFC transconductance voltage amplifier, which operates between GND and 5.5 V maximum, sets the multiplier output current to zero below 1 V, and turns off the PFC gate drive when it falls below 0.33 V.
2 RT input A resistor from RT to GND programs the oscillator frequency measured at CT_BUFF over a recommended 45 kΩ to 500 kΩ range (600 kHz to 65 kHz), and the pin is nominally 3 V dc with no capacitor allowed.
3 VSENSE input Inverting input to the PFC transconductance voltage amplifier (the PFC feedback point), also connected to the OVP, ENABLE and UVLO2 comparators.
4 D_MAX input Positive input that programs the PWM maximum duty cycle at GT2, linear between 0.09 and 0.90 duty ratio, and a voltage below 0.7 V sets DMAX to 0.
5 CT_BUFF output Internally buffered 4-V amplitude PWM oscillator ramp output for slope compensation through a resistor to ISENSE2, and the internal buffer can drive a typical 500 µA resistive load.
6 GND power_in Signal ground for the IC to which all measured voltages are referenced, and PWRGND must be externally connected to it.
7 VERR input Feedback error voltage input for the PWM stage that is clamped to a maximum of 3 V, can demand 100% duty cycle at GT2, and has a typical 10 µA pull-up current.
8 ISENSE2 input Input for PWM stage current sense and peak current limit, with the peak limit threshold set to 1.3 V for peak current mode control.
9 VCC power_in Positive supply that should be connected to a stable source of at least 20 mA between 12 V and 17 V for normal operation, bypassed to GND with a 0.1 µF or larger ceramic capacitor.
10 GT2 output PWM stage MOSFET gate driver output, a 2-A peak source and 3-A peak sink totem pole driver.
11 PWRGND power_in Ground for the GT1 and GT2 output drivers, which should be tied to GND externally via a single Kelvin connection.
12 GT1 output PFC stage MOSFET gate driver output, a 2-A peak source and 3-A peak sink totem pole driver that is disabled unless VCC is outside the UVLO region and VREF is on.
13 SS2 input Soft-start pin for the PWM stage where an internal 10.5-µA source charges the external capacitor to 3 V, and SS2 quickly discharges to ground on a disable command or UVLO2 dropout.
14 PKLMT input Peak current limit input for the PFC stage with a 0 V threshold, using a resistor divider from VREF to the non-grounded side of the PFC current sense resistor.
15 CAOUT output Output of the PFC wide-bandwidth current amplifier that commands the PFC PWM comparator duty cycle, with current loop compensation connected between CAOUT and MOUT.
16 ISENSE1 input Non-inverting input of the PFC stage current amplifier, connected through a resistor to the grounded side of the PFC current sense resistor, with a value equal to the MOUT resistor.
17 MOUT bidirectional High-impedance multiplier current output and current amplifier input for the PFC stage, where a resistor to the non-grounded end of the PFC current sense resistor sets the power range.
18 IAC input Multiplier input that senses the rectified AC line voltage through a resistor, with a recommended maximum IAC current of 500 µA.
19 VFF input Voltage feedforward pin that sources an IAC/2 current through an external single-pole R/C filter to GND, and should be set to 1.4 V at low line.
20 VREF power_out Precision 7.5-V reference output that can deliver over 10 mA, is current limited to 25 mA, and should be bypassed to GND with a 0.1 µF to 10 µF ceramic capacitor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-20
Category Power Supply Chip
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC, idle VCC 20 V Idle 3
Supply voltage VCC, operating VCC 18 V Operating 3
Gate drive current (GT1, GT2), continuous 0.4 A Continuous 3
Gate drive current (GT1, GT2), pulsed sourcing -2.5 A Pulsed, sourcing 3
Gate drive current (GT1, GT2), pulsed sinking 3.5 A Pulsed, sinking 3
Maximum GT1, GT2 voltage -0.5 V Upper limit printed as VCC + 0.3 V 3
Input voltage VSENSE 0 11 V 3
Input voltage D_MAX, SS2, CAOUT, ISENSE1, MOUT, VFF -0.5 V Upper limit printed as VREF + 0.3 V 3
Input voltage VAOUT, CT_BUFF, ISENSE2, PKLMT -0.5 6 V 3
Pin current RT -0.5 mA 3
Pin current VFF -5 mA 3
Pin current CT_BUFF 1 mA 3
Pin current VAOUT, VERR, ISENSE2, SS2, CAOUT, IAC 10 mA Sign not printed in source 3
Maximum pin capacitance ISENSE2 220 pF 3
Operating junction temperature range TJ -55 150 °C 3
Storage temperature range Tstg -65 150 °C 3
Power dissipation, PDIP (N) package 1 W PDIP (N) package 3
ESD human body model 2.5 kV Human body model 3
ESD charged device model (CDM) 0.5 kV CDM 3
Operating free-air temperature range TA -40 105 °C Footnote: all devices rated from −40°C to +105°C 3
Supply current, off 100 150 µA VCC turn-on threshold −300 mV 4
Supply current, on 4 6 mA No load on GT1 or GT2 4
VCC turn-on threshold (UCC28513 option) 9.7 10.2 10.8 V 4
VCC turn-off threshold 9.1 9.7 10.6 V UCC2851X 4
UVLO hysteresis (UCC28513 option) 0.3 0.5 0.8 V 4
Overvoltage reference window (VREF +) 0.44 0.49 0.54 V 4
Overvoltage hysteresis 300 500 600 mV 4
Voltage amplifier open loop gain 50 60 dB 2 V ≤ VAOUT ≤ 4 V 4
Voltage amplifier high-level output voltage 5.3 5.5 5.6 V ILOAD = -150 µA 4
Voltage amplifier low-level output voltage 0 0.05 0.15 V ILOAD = 150 µA 4
Voltage amplifier gM conductance 70 100 130 µS IVAOUT = −20 µA to 20 µA 4
Voltage amplifier maximum source current -1 -3.5 mA 4
Voltage amplifier maximum sink current 1 3.5 mA 4
Current amplifier input offset voltage -5 0 5 mV VCM = 0 V, VCAOUT = 3 V 5
Current amplifier input bias current -50 -100 nA VCM = 0 V, VCAOUT = 3 V 5
Reference input voltage at 25°C 7.39 7.5 7.61 V 25°C 5
Reference input voltage over temperature 7.35 7.5 7.65 V Over temperature 5
Oscillator fPWM initial accuracy fPWM 170 200 230 kHz TA = 25°C 5
Oscillator frequency total variation 160 240 kHz Line, Temp 5
dc-to-dc ramp peak voltage 4.5 5 5.5 V 5
PFC ramp peak voltage 4.5 5 5.5 V 5
Reference short circuit current -20 -25 -50 mA VREF = 0 V 5
PKLMT reference voltage -20 0 20 mV 5
PKLMT propagation delay, PKLMT to GT1 150 300 500 ns 5
IMOUT low-line high-power output current IMOUT -245 -290 -330 µA IAC = 150 µA, VFF = 1.4 V, VAOUT = 5 V 5
Power limit (IMOUT × VFF) -343 -406 -462 µW IAC = 150 µA, VFF = 1.4 V, VAOUT = 5 V 5
Zero power comparator threshold 0.2 0.33 0.5 V Measured on VAOUT, falling edge 6
Zero power comparator hysteresis 40 90 140 mV Measured on VAOUT, rising edge 6
GT1 output rise time 16 25 ns CLOAD = 1 nF, RLOAD = 10 Ω 6
GT1 output fall time 7 15 ns CLOAD = 1 nF, RLOAD = 10 Ω 6
Maximum duty cycle (PFC GT1) 93 95 100 % 6
PWM turn-on reference 6.3 6.75 7.3 V UCC2851X 6
PWM UVLO2 hysteresis (UCC28513 option) 2.56 3.2 3.84 V 6
SS2 charge current -14 -10.5 -7 µA VSENSE = 7.5 V, SS2 = 0 V 6
Maximum duty cycle clamp (D_MAX) 70 75 80 % D_MAX = 4.15 V 6
Current sense comparator offset voltage 1.35 1.5 1.65 V ISENSE2 = 0 V, measured on VERR 6
Peak current comparator threshold voltage 1.15 1.3 1.45 V 7
PWM overcurrent input bias current 50 nA Ensured by design 7
GT2 output rise time 16 25 ns CLOAD = 1 nF, RLOAD = 10 Ω 7
GT2 output fall time 7 15 ns CLOAD = 1 nF, RLOAD = 10 Ω 7

CAD (KiCad official)

  • Symbol: UCC28513N
  • Footprint: Package_DIP:DIP-20_W7.62mm
  • 3D model: PDIP-20 (KiCad packages3D, STEP)
  • 3D model files: ucc28513n-etched.step / ucc28513n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28513n.step / ucc28513n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 0f7a7f654ed0116b, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF