main
Ray ucc28070pwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 82b06eb
{
  "schema_version": 1,
  "type": "component",
  "slug": "ucc28070pwr",
  "title": "UCC28070PWR",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc28070pwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UCC28070PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28070.pdf",
    "parts": {
      "symbol": "ucc28070pwr.kicad_sym",
      "footprint": "ucc28070pwr.kicad_mod",
      "model_3d": "ucc28070pwr-etched.glb",
      "model_3d_plain": "ucc28070pwr.glb",
      "model_3d_step": "ucc28070pwr-etched.step",
      "model_3d_step_plain": "ucc28070pwr.step",
      "lbr": "ucc28070pwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C138518"
    },
    "pins": [
      {
        "number": "1",
        "name": "CDR",
        "type": "input",
        "description": "Frequency-dithering rate programming capacitor to ground; connect to VREF to disable dithering."
      },
      {
        "number": "2",
        "name": "RDM",
        "type": "input",
        "description": "Frequency-dithering magnitude resistor to ground; external clock synchronization input when CDR > 5V."
      },
      {
        "number": "3",
        "name": "VAO",
        "type": "output",
        "description": "Voltage error amplifier output internally connected to multiplier and zero-power comparator; connect voltage loop compensation network between this pin and GND."
      },
      {
        "number": "4",
        "name": "VSENSE",
        "type": "input",
        "description": "Output voltage sense input to voltage error amplifier inverting input and current synthesis difference amplifier positive terminal; connect to PFC output with resistor-divider network."
      },
      {
        "number": "5",
        "name": "VINAC",
        "type": "input",
        "description": "Scaled AC line input voltage internally connected to multiplier and current synthesis difference amplifier negative terminal; connect resistor-divider network with matching attenuation to VSENSE divider."
      },
      {
        "number": "6",
        "name": "IMO",
        "type": "output",
        "description": "Multiplier output current node; connect resistor between this pin and GND to set multiplier gain with voltage range 0 to 3.3V."
      },
      {
        "number": "7",
        "name": "RSYNTH",
        "type": "input",
        "description": "Current synthesis down-slope programming resistor to GND for setting current synthesizer rate, 15kΩ to 750kΩ range; connect to VREF to disable current synthesis."
      },
      {
        "number": "8",
        "name": "CSB",
        "type": "input",
        "description": "Phase-B inductor current sense input internally connected to inverting input of phase-B current amplifier through current synthesis stage; 0 to 3.6V input range."
      },
      {
        "number": "9",
        "name": "CSA",
        "type": "input",
        "description": "Phase-A inductor current sense input internally connected to inverting input of phase-A current amplifier through current synthesis stage; 0 to 3.6V input range."
      },
      {
        "number": "10",
        "name": "PKLMT",
        "type": "input",
        "description": "Peak current limit threshold programming input via resistor-divider network from VREF to GND; voltage threshold range 0 to 4V."
      },
      {
        "number": "11",
        "name": "CAOB",
        "type": "output",
        "description": "Phase-B current amplifier output internally connected to inverting input of phase-B PWM comparator; connect current loop compensation network between this pin and GND."
      },
      {
        "number": "12",
        "name": "CAOA",
        "type": "output",
        "description": "Phase-A current amplifier output internally connected to inverting input of phase-A PWM comparator; connect current loop compensation network between this pin and GND."
      },
      {
        "number": "13",
        "name": "VREF",
        "type": "power_out",
        "description": "6V regulated reference voltage output for internal biasing and external use; bypass with 0.1μF ceramic capacitor, external load limited to 2mA."
      },
      {
        "number": "14",
        "name": "GDA",
        "type": "output",
        "description": "Phase-A gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Bias voltage input with operating range 10V to 21V and UVLO enable threshold at 10.2V ±0.4V; bypass with 0.1μF ceramic capacitor."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference; connect all compensation and programming networks to this pin via separate high-current noise isolation trace."
      },
      {
        "number": "17",
        "name": "GDB",
        "type": "output",
        "description": "Phase-B gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V."
      },
      {
        "number": "18",
        "name": "SS",
        "type": "input",
        "description": "Soft-start and external fault interface; connect capacitor to GND to program soft-start ramp with internal 10μA current source, or pull below 0.6V to immediately disable gate drivers."
      },
      {
        "number": "19",
        "name": "RT",
        "type": "input",
        "description": "Oscillator frequency programming resistor to GND; switching frequency fPWM = 7500/RRT(kΩ) with minimum 30kHz for UCC28070."
      },
      {
        "number": "20",
        "name": "DMAX",
        "type": "input",
        "description": "Maximum PWM duty-cycle programming resistor to GND; DMAX = 0.5(RDMX/RRT + 1) with typical operating range 92% to 98%."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 57,
        "cost_usd": 0.5634,
        "at": "2026-09-23T12:02:41"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc28070.pdf",
        "pages": 57,
        "sha256": "632656aea01a2438",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc28070pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc28070pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2110c243907d4790e96771c46e39e444aa43cd10c30bf9879fbd8892e9ec5fde",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-20",
      "Category": "Power Management (PMIC)",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ucc28070pwr"
  ],
  "discovery_pitch": "UCC28070PWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc28070pwr.kicad_sym",
    "ucc28070pwr.kicad_mod",
    "ucc28070pwr.glb",
    "ucc28070pwr.step",
    "ucc28070pwr.lbr",
    "docs/hero.png",
    "docs/ucc28070pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T13:38:20.921Z"
}