component
UCC28070PWR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
ucc28070pwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -89,7 +89,7 @@ "number": "7", "name": "RSYNTH", "type": "input",- "description": "Current synthesis down-slope programming resistor to GND for setting current synthesizer rate, 15k\u03a9 to 750k\u03a9 range; connect to VREF to disable current synthesis."+ "description": "Current synthesis down-slope programming resistor to GND for setting current synthesizer rate, 15kΩ to 750kΩ range; connect to VREF to disable current synthesis." }, { "number": "8",@@ -125,19 +125,19 @@ "number": "13", "name": "VREF", "type": "power_out",- "description": "6V regulated reference voltage output for internal biasing and external use; bypass with 0.1\u03bcF ceramic capacitor, external load limited to 2mA."+ "description": "6V regulated reference voltage output for internal biasing and external use; bypass with 0.1μF ceramic capacitor, external load limited to 2mA." }, { "number": "14", "name": "GDA", "type": "output",- "description": "Phase-A gate driver output for connecting to external gate-drive device; \u00b10.25A continuous and \u00b10.75A pulsed current rating, typically clamped at 13.5V."+ "description": "Phase-A gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V." }, { "number": "15", "name": "VCC", "type": "power_in",- "description": "Bias voltage input with operating range 10V to 21V and UVLO enable threshold at 10.2V \u00b10.4V; bypass with 0.1\u03bcF ceramic capacitor."+ "description": "Bias voltage input with operating range 10V to 21V and UVLO enable threshold at 10.2V ±0.4V; bypass with 0.1μF ceramic capacitor." }, { "number": "16",@@ -149,19 +149,19 @@ "number": "17", "name": "GDB", "type": "output",- "description": "Phase-B gate driver output for connecting to external gate-drive device; \u00b10.25A continuous and \u00b10.75A pulsed current rating, typically clamped at 13.5V."+ "description": "Phase-B gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V." }, { "number": "18", "name": "SS", "type": "input",- "description": "Soft-start and external fault interface; connect capacitor to GND to program soft-start ramp with internal 10\u03bcA current source, or pull below 0.6V to immediately disable gate drivers."+ "description": "Soft-start and external fault interface; connect capacitor to GND to program soft-start ramp with internal 10μA current source, or pull below 0.6V to immediately disable gate drivers." }, { "number": "19", "name": "RT", "type": "input",- "description": "Oscillator frequency programming resistor to GND; switching frequency fPWM = 7500/RRT(k\u03a9) with minimum 30kHz for UCC28070."+ "description": "Oscillator frequency programming resistor to GND; switching frequency fPWM = 7500/RRT(kΩ) with minimum 30kHz for UCC28070." }, { "number": "20",@@ -202,6 +202,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ucc28070pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 6.5,+ 1.2+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc28070pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 6.5,+ 1.2+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "2110c243907d4790e96771c46e39e444aa43cd10c30bf9879fbd8892e9ec5fde",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -187,7 +187,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ucc28070pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 6.5,+ 1.2+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc28070pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 6.5,+ 1.2+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "2110c243907d4790e96771c46e39e444aa43cd10c30bf9879fbd8892e9ec5fde",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -235,4 +275,4 @@ "public": true }, "updated_at": "2026-09-25T13:38:20.921Z"-}+}