main
Ray
Publish 0.1.1
b49df5a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249
{
"slug": "ucc27624dgnr",
"version": "0.1.1",
"type": "component",
"description": "Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"motor driver ics",
"ucc27624dgnr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ucc27624dgnr.kicad_sym",
"ucc27624dgnr.kicad_mod",
"ucc27624dgnr.glb",
"ucc27624dgnr.step",
"ucc27624dgnr.lbr",
"docs/hero.png",
"docs/ucc27624dgnr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ucc27624dgnr-hero.glb",
"ucc27624dgnr-hero.overlay.json",
"ucc27624dgnr-etched.glb"
],
"component": {
"mpn": "UCC27624DGNR",
"manufacturer": "Texas Instruments",
"package": "HVSSOP-8",
"pin_count": 9,
"category": "Motor Driver ICs",
"subcategory": "Gate Drivers",
"datasheet": "https://www.ti.com/lit/ds/symlink/ucc27624.pdf",
"parts": {
"symbol": "ucc27624dgnr.kicad_sym",
"footprint": "ucc27624dgnr.kicad_mod",
"model_3d": "ucc27624dgnr-hero.glb",
"model_3d_plain": "ucc27624dgnr-etched.glb",
"model_3d_step": "ucc27624dgnr-etched.step",
"model_3d_step_plain": "ucc27624dgnr.step",
"lbr": "ucc27624dgnr.lbr"
},
"distributor_links": {
"lcsc": "C6581862",
"digikey": "296-UCC27624DGNRTR-ND",
"mouser": "595-UCC27624DGNR"
},
"distributor_check": {
"checked_at": "2026-10-28T19:15:40Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-UCC27624DGNRTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-UCC27624DGNR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "ENA",
"type": "input",
"description": "Enable input for Channel A: pulling it LOW disables the OUTA output regardless of INA, pulling it HIGH enables OUTA, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused."
},
{
"number": "2",
"name": "INA",
"type": "input",
"description": "Non-inverting input to Channel A, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground: all signals are referenced to this pin, and VDD must be bypassed to it."
},
{
"number": "4",
"name": "INB",
"type": "input",
"description": "Non-inverting input to Channel B, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V."
},
{
"number": "5",
"name": "OUTB",
"type": "output",
"description": "Channel B gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V."
},
{
"number": "6",
"name": "VDD",
"type": "power_in",
"description": "Bias supply input with a recommended range of 4.5 V to 26 V (12 V nominal) and an absolute maximum of 30 V, to be bypassed with ceramic capacitors of at least 1 µF and 0.1 µF referenced to GND."
},
{
"number": "7",
"name": "OUTA",
"type": "output",
"description": "Channel A gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V."
},
{
"number": "8",
"name": "ENB",
"type": "input",
"description": "Enable input for Channel B: pulling it LOW disables the OUTB output regardless of INB, pulling it HIGH enables OUTB, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused."
},
{
"number": "9",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet's thermal pad (Table 4-1, 'Thermal Pad') has no printed pin number on the DGN package,; Table 4-1 types VDD as 'I' (input). It is listed here as power_in because it is the bias supply pin;; Package naming differs across the document: the Figure 4-2 caption and Section 9.3 call the DGN pack",
"exposed pad 9 added from the footprint"
],
"pages_sent": 10,
"cost_usd": 0.0479,
"at": "2026-10-28T19:15:22"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ucc27624.pdf",
"pages": 51,
"sha256": "b42590ddafb28a60",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ucc27624dgnr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.91,
3.0,
1.0
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "554843c203dff2acbe6882d1a4fcbe28127c92f09014d3187d5407427a8fd784",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ucc27624dgnr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.91,
3.0,
1.0
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "a9dae58c85d3b3d289a53876e2eac30f189f35a38b974e09df157c260457fb23",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DGN0008H",
"source_page": 38,
"D": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E": {
"nom_mm": 4.9,
"range_mm": [
4.75,
5.05
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.1,
"range_mm": [
null,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ucc27624dgnr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}