← Commit history
Publish 0.1.1
10 files changed
+554−454
README.md+64−10@@ -8,14 +8,14 @@ UCC27624DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions | Pin | Name | Type | Function | |---|---|---|---|-| 1 | ENA | input | Enable input for Channel A; pulling low disables Channel A output regardless of INA state; pulling high enables output; internally pulled high. |-| 2 | INA | input | Non-inverting input to Channel A; OUTA held low if INA is unbiased or floating due to internal pulldown; handles -10 V inputs. |-| 3 | GND | power_in | Ground; all signals are referenced to this pin. |-| 4 | INB | input | Non-inverting input to Channel B; OUTB held low if INB is unbiased or floating due to internal pulldown; handles -10 V inputs. |-| 5 | OUTB | output | Channel B output; capable of handling -2 V transients for 200 ns pulses. |-| 6 | VDD | power_in | Bias supply input for 4.5 V to 26 V operating range; bypass with ≥1 μF and 0.1 μF ceramic capacitors to GND. |-| 7 | OUTA | output | Channel A output; capable of handling -2 V transients for 200 ns pulses. |-| 8 | ENB | input | Enable input for Channel B; pulling low disables Channel B output regardless of INB state; pulling high enables output; internally pulled high. |+| 1 | ENA | input | Enable input for Channel A: pulling it LOW disables the OUTA output regardless of INA, pulling it HIGH enables OUTA, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused. |+| 2 | INA | input | Non-inverting input to Channel A, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V. |+| 3 | GND | power_in | Ground: all signals are referenced to this pin, and VDD must be bypassed to it. |+| 4 | INB | input | Non-inverting input to Channel B, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V. |+| 5 | OUTB | output | Channel B gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V. |+| 6 | VDD | power_in | Bias supply input with a recommended range of 4.5 V to 26 V (12 V nominal) and an absolute maximum of 30 V, to be bypassed with ceramic capacitors of at least 1 µF and 0.1 µF referenced to GND. |+| 7 | OUTA | output | Channel A gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V. |+| 8 | ENB | input | Enable input for Channel B: pulling it LOW disables the OUTB output regardless of INB, pulling it HIGH enables OUTB, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused. | | 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). | ## Key specifications@@ -27,18 +27,72 @@ UCC27624DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions | Category | Motor Driver ICs | | Pins | 9 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply voltage, VDD | VDD | -0.3 | | 30 | V | | 5 |+| Output voltage, OUTA, OUTB | | -0.3 | | | V | DC; max printed as VDD +0.3 | 5 |+| Output voltage, OUTA, OUTB | | -2 | | | V | 200ns pulse; max printed as VDD +3 | 5 |+| Input voltage, INA, INB, ENA, ENB | | -10 | | 30 | V | | 5 |+| Operating junction temperature | TJ | -40 | | 150 | °C | | 5 |+| Lead temperature | | | | 300 | °C | Soldering, 10 sec. | 5 |+| Lead temperature | | | | 260 | °C | Reflow | 5 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |+| Supply voltage, VDD | VDD | 4.5 | 12 | 26 | V | | 5 |+| Input voltage, INA, INB, ENA, ENB | | -10 | | 26 | V | | 5 |+| Output voltage, OUTA, OUTB | | 0 | | | V | max printed as VDD | 5 |+| Operating junction temperature | TJ | -40 | | 150 | °C | | 5 |+| VDD quiescent supply current | IVDDq | | 300 | 450 | μA | VINx = 3.3 V, VDD = 3.4 V, ENx = VDD | 6 |+| VDD static supply current | IVDD | | 0.6 | 1 | mA | VINx = 3.3 V, ENx = VDD | 6 |+| VDD static supply current | IVDD | | 0.7 | 1 | mA | VINx = 0 V, ENx = VDD | 6 |+| VDD operating current | IVDDO | | 3.2 | 3.8 | mA | fSW = 1000 kHz, ENx = VDD, VINx = 0 V, 3.3 V PWM | 6 |+| VDD disable current | IDIS | | 0.8 | 1.1 | mA | VINx = 3.3 V, ENx = 0 V | 6 |+| VDD UVLO rising threshold | VVDD_ON | 3.8 | 4.1 | 4.4 | V | | 6 |+| VDD UVLO falling threshold | VVDD_OFF | 3.5 | 3.8 | 4.1 | V | | 6 |+| Input signal high threshold | VINx_H | 1.8 | 2 | 2.3 | V | Output High, ENx = HIGH | 6 |+| Input signal low threshold | VINx_L | 0.8 | 1 | 1.2 | V | Output Low, ENx = HIGH | 6 |+| Enable signal high threshold | VENx_H | 1.8 | 2 | 2.3 | V | Output High, INx = HIGH | 6 |+| Enable signal low threshold | VENx_L | 0.8 | 1 | 1.2 | V | Output Low, INx = HIGH | 6 |+| Rise time | tRx | | 6 | 10 | ns | CLOAD = 1.8 nF, 20% to 80%, Vin = 0 V, 3.3 V | 7 |+| Fall time | tFx | | 10 | 14 | ns | CLOAD = 1.8 nF, 90% to 10%, Vin = 0 V, 3.3 V | 7 |+| Turn-on propagation delay | tD1x | | 17 | 27 | ns | CLOAD = 1.8 nF, VINx_H of the input rise to 10% of output rise, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C | 7 |+| Turn-off propagation delay | tD2x | | 17 | 27 | ns | CLOAD = 1.8 nF, VINx_L of the input fall to 90% of output fall, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C | 7 |+| Enable propagation delay | tD3x | | 17 | 27 | ns | CLOAD = 1.8 nF, VENx_H of the enable rise to 10% of output rise, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C | 7 |+| Disable propagation delay | tD4x | | 17 | 27 | ns | CLOAD = 1.8 nF, VENx_L of the enable fall to 90% of output fall, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C | 7 |+| Delay matching between two channels | tM | | 1 | 2 | ns | CLOAD = 1.8 nF, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, INA = INB, /tRA, tRB/, /tFA, tFB/ | 7 |+| Minimum input pulse width | tPWmin | | 10 | 15 | ns | CL = 1.8 nF, Vin = 0 V, 3.3 V, Fsw = 500 kHz, Vo > 1.5 V | 7 |+| Pullup resistance | ROH | | 5 | 8.5 | Ω | IOUT = -50 mA | 6 |+| Pulldown resistance | ROL | | 0.6 | 1.1 | Ω | IOUT = 50 mA | 6 |+| VDD UVLO hysteresis | VVDD_HYS | | 0.3 | | V | | 6 |+| Input signal hysteresis | VINx_HYS | | 1 | | V | | 6 |+| INx pin pulldown resistor | RINx | | 120 | | kΩ | INx = 3.3 V | 6 |+| Enable signal hysteresis | VENx_HYS | | 1 | | V | | 6 |+| EN pin pullup resistance | RENx | | 200 | | kΩ | ENx = 0 V | 6 |+| Peak output source current | ISRC | | 5 | | A | VDD = 12 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz | 6 |+| Peak output sink current | ISNK | | -5 | | A | VDD = 12 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz | 6 |+| Junction-to-ambient thermal resistance (DGN) | RθJA | | 48.9 | | °C/W | DGN (8-pin) package column | 5 |+| Junction-to-case (top) thermal resistance (DGN) | RθJC(top) | | 71.8 | | °C/W | DGN (8-pin) package column | 5 |+| Junction-to-board thermal resistance (DGN) | RθJB | | 22.3 | | °C/W | DGN (8-pin) package column | 5 |+| Junction-to-top characterization parameter (DGN) | ψJT | | 2.6 | | °C/W | DGN (8-pin) package column | 5 |+| Junction-to-board characterization parameter (DGN) | ψJB | | 22.3 | | °C/W | DGN (8-pin) package column | 5 |+| Junction-to-case (bottom) thermal resistance (DGN) | RθJC(bot) | | 4.5 | | °C/W | DGN (8-pin) package column | 5 |+ ## CAD (KiCad official) - Symbol: `UCC27624DGNR` - Footprint: `Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm` - 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `ucc27624dgnr-etched.step` / `ucc27624dgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc27624dgnr.step` / `ucc27624dgnr.glb` are the bare package body. ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903514644635648) (37 pp, sha256 `a98fee080f60071a`, retrieved 2026-10-03, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc27624.pdf) (51 pp, sha256 `b42590ddafb28a60`, retrieved 2026-10-28, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/ucc27624dgnr-datasheet.pdf)
docs/hero.png⋯ 1 unchanged line ⋯
docs/ucc27624dgnr-datasheet.pdf⋯ 1 unchanged line ⋯
package.json+96−26@@ -1,6 +1,6 @@ { "slug": "ucc27624dgnr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -28,7 +28,8 @@ "viewers/symbol.html", "viewers/footprint.html", "ucc27624dgnr-hero.glb",- "ucc27624dgnr-hero.overlay.json"+ "ucc27624dgnr-hero.overlay.json",+ "ucc27624dgnr-etched.glb" ], "component": { "mpn": "UCC27624DGNR",@@ -37,14 +38,15 @@ "pin_count": 9, "category": "Motor Driver ICs", "subcategory": "Gate Drivers",- "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903514644635648",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ucc27624.pdf", "parts": { "symbol": "ucc27624dgnr.kicad_sym", "footprint": "ucc27624dgnr.kicad_mod", "model_3d": "ucc27624dgnr-hero.glb",- "model_3d_step": "ucc27624dgnr.step",- "lbr": "ucc27624dgnr.lbr",- "model_3d_plain": "ucc27624dgnr.glb"+ "model_3d_plain": "ucc27624dgnr-etched.glb",+ "model_3d_step": "ucc27624dgnr-etched.step",+ "model_3d_step_plain": "ucc27624dgnr.step",+ "lbr": "ucc27624dgnr.lbr" }, "distributor_links": { "lcsc": "C6581862",@@ -52,7 +54,7 @@ "mouser": "595-UCC27624DGNR" }, "distributor_check": {- "checked_at": "2026-10-03T02:00:17Z",+ "checked_at": "2026-10-28T19:15:40Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-UCC27624DGNRTR-ND",@@ -68,49 +70,49 @@ "number": "1", "name": "ENA", "type": "input",- "description": "Enable input for Channel A; pulling low disables Channel A output regardless of INA state; pulling high enables output; internally pulled high."+ "description": "Enable input for Channel A: pulling it LOW disables the OUTA output regardless of INA, pulling it HIGH enables OUTA, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused." }, { "number": "2", "name": "INA", "type": "input",- "description": "Non-inverting input to Channel A; OUTA held low if INA is unbiased or floating due to internal pulldown; handles -10 V inputs."+ "description": "Non-inverting input to Channel A, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V." }, { "number": "3", "name": "GND", "type": "power_in",- "description": "Ground; all signals are referenced to this pin."+ "description": "Ground: all signals are referenced to this pin, and VDD must be bypassed to it." }, { "number": "4", "name": "INB", "type": "input",- "description": "Non-inverting input to Channel B; OUTB held low if INB is unbiased or floating due to internal pulldown; handles -10 V inputs."+ "description": "Non-inverting input to Channel B, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V." }, { "number": "5", "name": "OUTB", "type": "output",- "description": "Channel B output; capable of handling -2 V transients for 200 ns pulses."+ "description": "Channel B gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V." }, { "number": "6", "name": "VDD", "type": "power_in",- "description": "Bias supply input for 4.5 V to 26 V operating range; bypass with ≥1 μF and 0.1 μF ceramic capacitors to GND."+ "description": "Bias supply input with a recommended range of 4.5 V to 26 V (12 V nominal) and an absolute maximum of 30 V, to be bypassed with ceramic capacitors of at least 1 µF and 0.1 µF referenced to GND." }, { "number": "7", "name": "OUTA", "type": "output",- "description": "Channel A output; capable of handling -2 V transients for 200 ns pulses."+ "description": "Channel A gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V." }, { "number": "8", "name": "ENB", "type": "input",- "description": "Enable input for Channel B; pulling low disables Channel B output regardless of INB state; pulling high enables output; internally pulled high."+ "description": "Enable input for Channel B: pulling it LOW disables the OUTB output regardless of INB, pulling it HIGH enables OUTB, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused." }, { "number": "9",@@ -124,23 +126,24 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-haiku-4-5-20251001",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [+ "extractor flagged: The datasheet's thermal pad (Table 4-1, 'Thermal Pad') has no printed pin number on the DGN package,; Table 4-1 types VDD as 'I' (input). It is listed here as power_in because it is the bias supply pin;; Package naming differs across the document: the Figure 4-2 caption and Section 9.3 call the DGN pack", "exposed pad 9 added from the footprint" ],- "pages_sent": 8,- "cost_usd": 0.0782,- "at": "2026-10-03T01:59:55"+ "pages_sent": 10,+ "cost_usd": 0.0479,+ "at": "2026-10-28T19:15:22" }, "datasheet": {- "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903514644635648",- "pages": 37,- "sha256": "a98fee080f60071a",- "source_tier": "lcsc"+ "url": "https://www.ti.com/lit/ds/symlink/ucc27624.pdf",+ "pages": 51,+ "sha256": "b42590ddafb28a60",+ "source_tier": "mfr" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -155,6 +158,25 @@ "footprint": "viewers/footprint.html" }, "models_3d": [+ {+ "file": "ucc27624dgnr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.91,+ 3.0,+ 1.0+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "554843c203dff2acbe6882d1a4fcbe28127c92f09014d3187d5407427a8fd784",+ "checked": "2026-10-28",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }, { "file": "ucc27624dgnr-etched.step", "role": "eda",@@ -170,10 +192,58 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "8ac818276eb596423e56c0c8b2167bd8504a2d79c71af39187b4fd19ce057c17",- "checked": "2026-10-17",+ "sha256": "a9dae58c85d3b3d289a53876e2eac30f189f35a38b974e09df157c260457fb23",+ "checked": "2026-10-28", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }- ]+ ],+ "package_dims": {+ "package_code": "DGN0008H",+ "source_page": 38,+ "D": {+ "nom_mm": 3.0,+ "range_mm": [+ 2.9,+ 3.1+ ]+ },+ "E1": {+ "nom_mm": 3.0,+ "range_mm": [+ 2.9,+ 3.1+ ]+ },+ "E": {+ "nom_mm": 4.9,+ "range_mm": [+ 4.75,+ 5.05+ ]+ },+ "e": {+ "nom_mm": 0.65,+ "range_mm": [+ null,+ null+ ]+ },+ "A": {+ "nom_mm": 1.1,+ "range_mm": [+ null,+ 1.1+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "ucc27624dgnr.step",+ "verdict": "PASS",+ "reasons": [+ "height and body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ } } }
page.json+104−34@@ -4,7 +4,7 @@ "slug": "ucc27624dgnr", "title": "UCC27624DGNR", "brief": "Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -20,14 +20,15 @@ "pin_count": 9, "category": "Motor Driver ICs", "subcategory": "Gate Drivers",- "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903514644635648",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ucc27624.pdf", "parts": { "symbol": "ucc27624dgnr.kicad_sym", "footprint": "ucc27624dgnr.kicad_mod", "model_3d": "ucc27624dgnr-hero.glb",- "model_3d_step": "ucc27624dgnr.step",- "lbr": "ucc27624dgnr.lbr",- "model_3d_plain": "ucc27624dgnr.glb"+ "model_3d_plain": "ucc27624dgnr-etched.glb",+ "model_3d_step": "ucc27624dgnr-etched.step",+ "model_3d_step_plain": "ucc27624dgnr.step",+ "lbr": "ucc27624dgnr.lbr" }, "distributor_links": { "lcsc": "C6581862",@@ -35,7 +36,7 @@ "mouser": "595-UCC27624DGNR" }, "distributor_check": {- "checked_at": "2026-10-03T02:00:17Z",+ "checked_at": "2026-10-28T19:15:40Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-UCC27624DGNRTR-ND",@@ -51,49 +52,49 @@ "number": "1", "name": "ENA", "type": "input",- "description": "Enable input for Channel A; pulling low disables Channel A output regardless of INA state; pulling high enables output; internally pulled high."+ "description": "Enable input for Channel A: pulling it LOW disables the OUTA output regardless of INA, pulling it HIGH enables OUTA, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused." }, { "number": "2", "name": "INA", "type": "input",- "description": "Non-inverting input to Channel A; OUTA held low if INA is unbiased or floating due to internal pulldown; handles -10 V inputs."+ "description": "Non-inverting input to Channel A, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V." }, { "number": "3", "name": "GND", "type": "power_in",- "description": "Ground; all signals are referenced to this pin."+ "description": "Ground: all signals are referenced to this pin, and VDD must be bypassed to it." }, { "number": "4", "name": "INB", "type": "input",- "description": "Non-inverting input to Channel B; OUTB held low if INB is unbiased or floating due to internal pulldown; handles -10 V inputs."+ "description": "Non-inverting input to Channel B, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V." }, { "number": "5", "name": "OUTB", "type": "output",- "description": "Channel B output; capable of handling -2 V transients for 200 ns pulses."+ "description": "Channel B gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V." }, { "number": "6", "name": "VDD", "type": "power_in",- "description": "Bias supply input for 4.5 V to 26 V operating range; bypass with ≥1 μF and 0.1 μF ceramic capacitors to GND."+ "description": "Bias supply input with a recommended range of 4.5 V to 26 V (12 V nominal) and an absolute maximum of 30 V, to be bypassed with ceramic capacitors of at least 1 µF and 0.1 µF referenced to GND." }, { "number": "7", "name": "OUTA", "type": "output",- "description": "Channel A output; capable of handling -2 V transients for 200 ns pulses."+ "description": "Channel A gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V." }, { "number": "8", "name": "ENB", "type": "input",- "description": "Enable input for Channel B; pulling low disables Channel B output regardless of INB state; pulling high enables output; internally pulled high."+ "description": "Enable input for Channel B: pulling it LOW disables the OUTB output regardless of INB, pulling it HIGH enables OUTB, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused." }, { "number": "9",@@ -107,23 +108,24 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-haiku-4-5-20251001",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [+ "extractor flagged: The datasheet's thermal pad (Table 4-1, 'Thermal Pad') has no printed pin number on the DGN package,; Table 4-1 types VDD as 'I' (input). It is listed here as power_in because it is the bias supply pin;; Package naming differs across the document: the Figure 4-2 caption and Section 9.3 call the DGN pack", "exposed pad 9 added from the footprint" ],- "pages_sent": 8,- "cost_usd": 0.0782,- "at": "2026-10-03T01:59:55"+ "pages_sent": 10,+ "cost_usd": 0.0479,+ "at": "2026-10-28T19:15:22" }, "datasheet": {- "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903514644635648",- "pages": 37,- "sha256": "a98fee080f60071a",- "source_tier": "lcsc"+ "url": "https://www.ti.com/lit/ds/symlink/ucc27624.pdf",+ "pages": 51,+ "sha256": "b42590ddafb28a60",+ "source_tier": "mfr" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -138,6 +140,25 @@ "footprint": "viewers/footprint.html" }, "models_3d": [+ {+ "file": "ucc27624dgnr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.91,+ 3,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "554843c203dff2acbe6882d1a4fcbe28127c92f09014d3187d5407427a8fd784",+ "checked": "2026-10-28",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }, { "file": "ucc27624dgnr-etched.step", "role": "eda",@@ -147,17 +168,65 @@ "seat": "z = 0", "extents_mm": [ 4.91,- 3.0,- 1.0+ 3,+ 1 ],- "zmin_mm": 0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "8ac818276eb596423e56c0c8b2167bd8504a2d79c71af39187b4fd19ce057c17",- "checked": "2026-10-17",+ "sha256": "a9dae58c85d3b3d289a53876e2eac30f189f35a38b974e09df157c260457fb23",+ "checked": "2026-10-28", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }- ]+ ],+ "package_dims": {+ "package_code": "DGN0008H",+ "source_page": 38,+ "D": {+ "nom_mm": 3,+ "range_mm": [+ 2.9,+ 3.1+ ]+ },+ "E1": {+ "nom_mm": 3,+ "range_mm": [+ 2.9,+ 3.1+ ]+ },+ "E": {+ "nom_mm": 4.9,+ "range_mm": [+ 4.75,+ 5.05+ ]+ },+ "e": {+ "nom_mm": 0.65,+ "range_mm": [+ null,+ null+ ]+ },+ "A": {+ "nom_mm": 1.1,+ "range_mm": [+ null,+ 1.1+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "ucc27624dgnr.step",+ "verdict": "PASS",+ "reasons": [+ "height and body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ } }, "metadata": { "specs": {@@ -201,9 +270,10 @@ "viewers/symbol.html", "viewers/footprint.html", "ucc27624dgnr-hero.glb",- "ucc27624dgnr-hero.overlay.json"+ "ucc27624dgnr-hero.overlay.json",+ "ucc27624dgnr-etched.glb" ],- "visibility": {- "public": true- }-}+ "visibility": "public",+ "description": "Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom"+}
ucc27624dgnr-hero.glb⋯ 1 unchanged line ⋯
ucc27624dgnr-hero.overlay.json+269−271@@ -1,275 +1,273 @@ {- "spec": "adom-hero 1.4",- "mpn": "UCC27624DGNR",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 9,- "span_mm": 5.87,- "dash_mm": 0.1468,- "gap_mm": 0.0881,- "pad_stroke_mm": 0.0352+ "spec": "adom-hero 1.4",+ "mpn": "UCC27624DGNR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 5.87,+ "dash_mm": 0.1468,+ "gap_mm": 0.088,+ "pad_stroke_mm": 0.0352+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ } },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.46,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.455,+ 2.455,+ -1.163,+ 1.163+ ],+ "pads_bbox_mm": [+ -2.875,+ 2.875,+ -1.225,+ 1.225+ ],+ "seating_z_mm": 0.0 },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 8,- "sides": "top + mirrored underside (single-sided)",- "omitted": null,- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "over_pads": true,- "tolerance_mm": 0.46,- "orientation_flipped": false,- "contacts_bbox_mm": [- -2.455,- 2.455,- -1.163,- 1.163- ],- "pads_bbox_mm": [- -2.875,- 2.875,- -1.225,- 1.225- ],- "seating_z_mm": 0.0- },- "sources": {- "glb": "ucc27624dgnr-etched.glb",- "glb_sha256": "4fce5ee9b205a2b31356893d045eb24d7a0c4fcb9d76f36cd52570cd4d9c3d05",- "footprint": "ucc27624dgnr.kicad_mod",- "footprint_sha256": "d407bce24b494711d4f7ec53ebfc189c6ac5dd588b2a887ed672ab6ce3b1a095",- "pins": "page.json component.pins",- "pins_sha256": "1329413e3a49180deb467e3fcc18db09d7a7f9e8d22d91287d9ab1372ba0c9bc"- },- "generator": "factory/hero_glb.py",- "labels": [- {- "pad": "1",- "text": "ENA",- "x": -2.975,- "y": -0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "2",- "text": "INA",- "x": -2.975,- "y": -0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "3",- "text": "GND",- "x": -2.975,- "y": 0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "4",- "text": "INB",- "x": -2.975,- "y": 0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "5",- "text": "OUTB",- "x": 2.975,- "y": 0.975,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "6",- "text": "VDD",- "x": 2.975,- "y": 0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "7",- "text": "OUTA",- "x": 2.975,- "y": -0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "8",- "text": "ENB",- "x": 2.975,- "y": -0.975,- "align": "left",- "vertical": false,- "h": 0.325- }- ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -2.15,- -0.975- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0+ "sources": {+ "glb": "ucc27624dgnr-etched.glb",+ "glb_sha256": "4fce5ee9b205a2b31356893d045eb24d7a0c4fcb9d76f36cd52570cd4d9c3d05",+ "footprint": "ucc27624dgnr.kicad_mod",+ "footprint_sha256": "1cf5255dd4e27705ef6fb65d8755e97a27e5cc02634c70e3b45679bc8b989158",+ "pins": "page.json component.pins",+ "pins_sha256": "1329413e3a49180deb467e3fcc18db09d7a7f9e8d22d91287d9ab1372ba0c9bc" },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -2.15,- -0.325- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -2.15,- 0.325- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -2.15,- 0.975- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- 2.15,- 0.975- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- 2.15,- 0.325- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- 2.15,- -0.325- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- 2.15,- -0.975- ],- "size_mm": [- 1.45,- 0.5- ],- "rot": 0.0- },- {- "number": "9",- "shape": "rect",- "center_mm": [- 0.0,- 0.0- ],- "size_mm": [- 1.57,- 1.89- ],- "rot": 0.0- }- ]-}+ "generator": "adom-wiki 1.8.0 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "ENA",+ "x": -2.975,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "INA",+ "x": -2.975,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "GND",+ "x": -2.975,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "INB",+ "x": -2.975,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "OUTB",+ "x": 2.975,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "VDD",+ "x": 2.975,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "OUTA",+ "x": 2.975,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "ENB",+ "x": 2.975,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -0.975+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -0.325+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 0.325+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 0.975+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 0.975+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 0.325+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -0.325+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -0.975+ ],+ "size_mm": [+ 1.45,+ 0.5+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.57,+ 1.89+ ],+ "rot": 0.0+ }+ ]+}
ucc27624dgnr.kicad_mod+6−108@@ -104,114 +104,6 @@ (fill yes) (layer "F.SilkS") )- (fp_line- (start -3.13 -1.48)- (end -1.75 -1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start -3.13 1.48)- (end -3.13 -1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start -1.75 -1.75)- (end 1.75 -1.75)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start -1.75 -1.48)- (end -1.75 -1.75)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start -1.75 1.48)- (end -3.13 1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start -1.75 1.75)- (end -1.75 1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start 1.75 -1.75)- (end 1.75 -1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start 1.75 -1.48)- (end 3.13 -1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start 1.75 1.48)- (end 1.75 1.75)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start 1.75 1.75)- (end -1.75 1.75)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start 3.13 -1.48)- (end 3.13 1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- )- (fp_line- (start 3.13 1.48)- (end 1.75 1.48)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- ) (fp_poly (pts (xy -0.75 -1.5)@@ -328,4 +220,10 @@ (xyz 0 0 0) ) )+ (fp_poly+ (pts (xy -3.13 -1.48) (xy -1.75 -1.48) (xy -1.75 -1.75) (xy 1.75 -1.75) (xy 1.75 -1.48) (xy 3.13 -1.48) (xy 3.13 1.48) (xy 1.75 1.48) (xy 1.75 1.75) (xy -1.75 1.75) (xy -1.75 1.48) (xy -3.13 1.48))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ ) )
ucc27624dgnr.lbr+14−4@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm"> <description>HVSSOP-8-1EP, 3 x 3 mm, 0.65 mm pitch</description>@@ -62,7 +62,7 @@ <smd name="6" x="2.1500" y="-0.3250" dx="1.4500" dy="0.5000" layer="1" roundness="50"/> <smd name="7" x="2.1500" y="0.3250" dx="1.4500" dy="0.5000" layer="1" roundness="50"/> <smd name="8" x="2.1500" y="0.9750" dx="1.4500" dy="0.5000" layer="1" roundness="50"/>- <smd name="9" x="0.0000" y="-0.0000" dx="1.5700" dy="1.8900" layer="1"/>+ <smd name="9" x="0.0000" y="-0.0000" dx="1.5700" dy="1.8900" layer="1" cream="no"/> <polygon width="0.1200" layer="21"> <vertex x="-2.1600" y="1.4900"/> <vertex x="-2.4000" y="1.8200"/>@@ -87,6 +87,7 @@ </packages> <symbols> <symbol name="UCC27624DGNR">+ <description>Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="7.62" x2="12.7" y2="-7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -106,7 +107,7 @@ </symbols> <devicesets> <deviceset name="UCC27624DGNR" prefix="U">- <description></description>+ <description>Texas Instruments Gate Drivers, HVSSOP-8. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="UCC27624DGNR" x="0" y="0"/> </gates>@@ -123,7 +124,16 @@ <connect gate="G$1" pin="OUTA" pad="7"/> <connect gate="G$1" pin="VDD" pad="6"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="UCC27624DGNR" constant="no"/>+ <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+ <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903514644635648" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ucc27624dgnr" constant="no"/>+ <attribute name="MOUSER_PN" value="595-UCC27624DGNR" constant="no"/>+ <attribute name="DIGIKEY_PN" value="296-UCC27624DGNRTR-ND" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
ucc27624dgnr.step+1−1@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-10-17T05:09:07',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-10-28T19:15:30',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));