main
History Download
Ray Publish 0.1.1 b49df5a

UCC27624DGNR

Texas Instruments · Gate Drivers · HVSSOP-8

UCC27624DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENA input Enable input for Channel A: pulling it LOW disables the OUTA output regardless of INA, pulling it HIGH enables OUTA, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused.
2 INA input Non-inverting input to Channel A, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V.
3 GND power_in Ground: all signals are referenced to this pin, and VDD must be bypassed to it.
4 INB input Non-inverting input to Channel B, held LOW by an internal pulldown when unbiased or floating, so it should be connected to GND if unused; the recommended input range is -10 V to 26 V.
5 OUTB output Channel B gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V.
6 VDD power_in Bias supply input with a recommended range of 4.5 V to 26 V (12 V nominal) and an absolute maximum of 30 V, to be bypassed with ceramic capacitors of at least 1 µF and 0.1 µF referenced to GND.
7 OUTA output Channel A gate driver output, rated for DC voltages from -0.3 V to VDD + 0.3 V and for 200 ns pulses from -2 V to VDD + 3 V.
8 ENB input Enable input for Channel B: pulling it LOW disables the OUTB output regardless of INB, pulling it HIGH enables OUTB, and if left floating it defaults to enabled via an internal pullup, so TI recommends connecting it to VDD when unused.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-8
Category Motor Driver ICs
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VDD VDD -0.3 30 V 5
Output voltage, OUTA, OUTB -0.3 V DC; max printed as VDD +0.3 5
Output voltage, OUTA, OUTB -2 V 200ns pulse; max printed as VDD +3 5
Input voltage, INA, INB, ENA, ENB -10 30 V 5
Operating junction temperature TJ -40 150 °C 5
Lead temperature 300 °C Soldering, 10 sec. 5
Lead temperature 260 °C Reflow 5
Storage temperature Tstg -65 150 °C 5
Supply voltage, VDD VDD 4.5 12 26 V 5
Input voltage, INA, INB, ENA, ENB -10 26 V 5
Output voltage, OUTA, OUTB 0 V max printed as VDD 5
Operating junction temperature TJ -40 150 °C 5
VDD quiescent supply current IVDDq 300 450 μA VINx = 3.3 V, VDD = 3.4 V, ENx = VDD 6
VDD static supply current IVDD 0.6 1 mA VINx = 3.3 V, ENx = VDD 6
VDD static supply current IVDD 0.7 1 mA VINx = 0 V, ENx = VDD 6
VDD operating current IVDDO 3.2 3.8 mA fSW = 1000 kHz, ENx = VDD, VINx = 0 V, 3.3 V PWM 6
VDD disable current IDIS 0.8 1.1 mA VINx = 3.3 V, ENx = 0 V 6
VDD UVLO rising threshold VVDD_ON 3.8 4.1 4.4 V 6
VDD UVLO falling threshold VVDD_OFF 3.5 3.8 4.1 V 6
Input signal high threshold VINx_H 1.8 2 2.3 V Output High, ENx = HIGH 6
Input signal low threshold VINx_L 0.8 1 1.2 V Output Low, ENx = HIGH 6
Enable signal high threshold VENx_H 1.8 2 2.3 V Output High, INx = HIGH 6
Enable signal low threshold VENx_L 0.8 1 1.2 V Output Low, INx = HIGH 6
Rise time tRx 6 10 ns CLOAD = 1.8 nF, 20% to 80%, Vin = 0 V, 3.3 V 7
Fall time tFx 10 14 ns CLOAD = 1.8 nF, 90% to 10%, Vin = 0 V, 3.3 V 7
Turn-on propagation delay tD1x 17 27 ns CLOAD = 1.8 nF, VINx_H of the input rise to 10% of output rise, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C 7
Turn-off propagation delay tD2x 17 27 ns CLOAD = 1.8 nF, VINx_L of the input fall to 90% of output fall, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C 7
Enable propagation delay tD3x 17 27 ns CLOAD = 1.8 nF, VENx_H of the enable rise to 10% of output rise, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C 7
Disable propagation delay tD4x 17 27 ns CLOAD = 1.8 nF, VENx_L of the enable fall to 90% of output fall, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, TJ = 125°C 7
Delay matching between two channels tM 1 2 ns CLOAD = 1.8 nF, Vin = 0 V, 3.3 V, Fsw = 500 kHz, 50% duty cycle, INA = INB, /tRA, tRB/, /tFA, tFB/ 7
Minimum input pulse width tPWmin 10 15 ns CL = 1.8 nF, Vin = 0 V, 3.3 V, Fsw = 500 kHz, Vo > 1.5 V 7
Pullup resistance ROH 5 8.5 Ω IOUT = -50 mA 6
Pulldown resistance ROL 0.6 1.1 Ω IOUT = 50 mA 6
VDD UVLO hysteresis VVDD_HYS 0.3 V 6
Input signal hysteresis VINx_HYS 1 V 6
INx pin pulldown resistor RINx 120 kΩ INx = 3.3 V 6
Enable signal hysteresis VENx_HYS 1 V 6
EN pin pullup resistance RENx 200 kΩ ENx = 0 V 6
Peak output source current ISRC 5 A VDD = 12 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz 6
Peak output sink current ISNK -5 A VDD = 12 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz 6
Junction-to-ambient thermal resistance (DGN) RθJA 48.9 °C/W DGN (8-pin) package column 5
Junction-to-case (top) thermal resistance (DGN) RθJC(top) 71.8 °C/W DGN (8-pin) package column 5
Junction-to-board thermal resistance (DGN) RθJB 22.3 °C/W DGN (8-pin) package column 5
Junction-to-top characterization parameter (DGN) ψJT 2.6 °C/W DGN (8-pin) package column 5
Junction-to-board characterization parameter (DGN) ψJB 22.3 °C/W DGN (8-pin) package column 5
Junction-to-case (bottom) thermal resistance (DGN) RθJC(bot) 4.5 °C/W DGN (8-pin) package column 5

CAD (KiCad official)

  • Symbol: UCC27624DGNR
  • Footprint: Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: ucc27624dgnr-etched.step / ucc27624dgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc27624dgnr.step / ucc27624dgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 b42590ddafb28a60, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF