main
Ray ucc21750dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 86a8e8b
{
  "schema_version": 1,
  "type": "component",
  "slug": "ucc21750dwr",
  "title": "UCC21750DWR",
  "brief": "Texas Instruments Isolators - Gate Drivers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc21750dwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UCC21750DWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "Isolators - Gate Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc21750",
    "parts": {
      "symbol": "ucc21750dwr.kicad_sym",
      "footprint": "ucc21750dwr.kicad_mod",
      "model_3d": "ucc21750dwr-etched.glb",
      "model_3d_plain": "ucc21750dwr.glb",
      "model_3d_step": "ucc21750dwr-etched.step",
      "model_3d_step_plain": "ucc21750dwr.step",
      "lbr": "ucc21750dwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5216339"
    },
    "pins": [
      {
        "number": "1",
        "name": "AIN",
        "type": "input",
        "description": "Isolated analog sensing input with voltage range 0.6 V to 4.5 V; parallelize small capacitor to COM for noise immunity; tie to COM if unused."
      },
      {
        "number": "2",
        "name": "DESAT",
        "type": "input",
        "description": "Desaturation protection input referenced to COM with detection threshold 8.5 V to 9.8 V; tie to COM if unused."
      },
      {
        "number": "3",
        "name": "COM",
        "type": "power_in",
        "description": "Common ground reference for output side, connected to emitter of IGBT or source of SiC-MOSFET."
      },
      {
        "number": "4",
        "name": "OUTH",
        "type": "output",
        "description": "Gate driver output pullup with peak source current ±10 A and high-level output voltage 17.5 V at IOUT = -0.2 A."
      },
      {
        "number": "5",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive gate drive supply rail with operating range 13 V to 33 V; bypass with >10-μF capacitor to COM."
      },
      {
        "number": "6",
        "name": "OUTL",
        "type": "output",
        "description": "Gate driver output pulldown with peak sink current ±10 A and low-level output voltage 60 mV at IOUT = 0.2 A."
      },
      {
        "number": "7",
        "name": "CLMPI",
        "type": "input",
        "description": "Internal active miller clamp input connected directly to power transistor gate; threshold voltage 1.5 V to 2.5 V referenced to VEE; leave floating or tie to VEE if unused."
      },
      {
        "number": "8",
        "name": "VEE",
        "type": "power_in",
        "description": "Negative gate drive supply rail with operating range -17.5 V to +0.3 V referenced to COM; bypass with >10-μF capacitor to COM."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Input power supply and logic ground reference; bypass with >1-μF capacitor to VCC."
      },
      {
        "number": "10",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting gate driver control input with high threshold 1.85 V to 2.31 V (VCC = 3.3 V) and low threshold 0.99 V to 1.52 V; tie to VCC if unused."
      },
      {
        "number": "11",
        "name": "IN–",
        "type": "input",
        "description": "Inverting gate driver control input with high threshold 1.85 V to 2.31 V (VCC = 3.3 V) and low threshold 0.99 V to 1.52 V; tie to GND if unused."
      },
      {
        "number": "12",
        "name": "RDY",
        "type": "output",
        "description": "Power good output (open drain) indicating power supply status of VCC-GND and VDD-COM; pulled to GND during UVLO condition."
      },
      {
        "number": "13",
        "name": "FLT",
        "type": "output",
        "description": "Active-low fault alarm output (open drain) signaling overcurrent or short circuit detection; pulled to GND on fault condition."
      },
      {
        "number": "14",
        "name": "RST/EN",
        "type": "input",
        "description": "Reset and enable pin with dual function: (1) enable/shutdown of output by pulling low >1000 ns, (2) reset DESAT fault by pulling low >1000 ns after fault mute time; internally pulled down 50 kΩ."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Input power supply with operating range 3.0 V to 5.5 V; bypass with >1-μF capacitor to GND."
      },
      {
        "number": "16",
        "name": "APWM",
        "type": "output",
        "description": "Isolated analog PWM output with frequency 380 kHz to 420 kHz; duty cycle 7.5% to 88.5% for AIN voltage 4.5 V to 0.6 V respectively; leave floating if unused."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 53,
        "cost_usd": 0.4959,
        "at": "2026-09-22T00:00:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ucc21750",
        "pages": 53,
        "sha256": "3c71f631cf74e352",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc21750dwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc21750dwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6739adbc7942cb34c639fb21b97c4aa92531878a78f87d9b3d7748271b76d761",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-16-300mil",
      "Category": "Power Management (PMIC)",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ucc21750dwr"
  ],
  "discovery_pitch": "UCC21750DWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc21750dwr.kicad_sym",
    "ucc21750dwr.kicad_mod",
    "ucc21750dwr.glb",
    "ucc21750dwr.step",
    "ucc21750dwr.lbr",
    "docs/hero.png",
    "docs/ucc21750dwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T13:33:54.293Z"
}