component
UCC21750DWR
Public Made by Adomby adom
Texas Instruments Isolators - Gate Drivers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
ucc21750dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -71,19 +71,19 @@ "number": "4", "name": "OUTH", "type": "output",- "description": "Gate driver output pullup with peak source current \u00b110 A and high-level output voltage 17.5 V at IOUT = -0.2 A."+ "description": "Gate driver output pullup with peak source current ±10 A and high-level output voltage 17.5 V at IOUT = -0.2 A." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive gate drive supply rail with operating range 13 V to 33 V; bypass with >10-\u03bcF capacitor to COM."+ "description": "Positive gate drive supply rail with operating range 13 V to 33 V; bypass with >10-μF capacitor to COM." }, { "number": "6", "name": "OUTL", "type": "output",- "description": "Gate driver output pulldown with peak sink current \u00b110 A and low-level output voltage 60 mV at IOUT = 0.2 A."+ "description": "Gate driver output pulldown with peak sink current ±10 A and low-level output voltage 60 mV at IOUT = 0.2 A." }, { "number": "7",@@ -95,13 +95,13 @@ "number": "8", "name": "VEE", "type": "power_in",- "description": "Negative gate drive supply rail with operating range -17.5 V to +0.3 V referenced to COM; bypass with >10-\u03bcF capacitor to COM."+ "description": "Negative gate drive supply rail with operating range -17.5 V to +0.3 V referenced to COM; bypass with >10-μF capacitor to COM." }, { "number": "9", "name": "GND", "type": "power_in",- "description": "Input power supply and logic ground reference; bypass with >1-\u03bcF capacitor to VCC."+ "description": "Input power supply and logic ground reference; bypass with >1-μF capacitor to VCC." }, { "number": "10",@@ -111,7 +111,7 @@ }, { "number": "11",- "name": "IN\u2013",+ "name": "IN–", "type": "input", "description": "Inverting gate driver control input with high threshold 1.85 V to 2.31 V (VCC = 3.3 V) and low threshold 0.99 V to 1.52 V; tie to GND if unused." },@@ -131,13 +131,13 @@ "number": "14", "name": "RST/EN", "type": "input",- "description": "Reset and enable pin with dual function: (1) enable/shutdown of output by pulling low >1000 ns, (2) reset DESAT fault by pulling low >1000 ns after fault mute time; internally pulled down 50 k\u03a9."+ "description": "Reset and enable pin with dual function: (1) enable/shutdown of output by pulling low >1000 ns, (2) reset DESAT fault by pulling low >1000 ns after fault mute time; internally pulled down 50 kΩ." }, { "number": "15", "name": "VCC", "type": "power_in",- "description": "Input power supply with operating range 3.0 V to 5.5 V; bypass with >1-\u03bcF capacitor to GND."+ "description": "Input power supply with operating range 3.0 V to 5.5 V; bypass with >1-μF capacitor to GND." }, { "number": "16",@@ -178,6 +178,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ucc21750dwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc21750dwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6739adbc7942cb34c639fb21b97c4aa92531878a78f87d9b3d7748271b76d761",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -163,7 +163,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ucc21750dwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc21750dwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6739adbc7942cb34c639fb21b97c4aa92531878a78f87d9b3d7748271b76d761",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -211,4 +251,4 @@ "public": true }, "updated_at": "2026-09-25T13:33:54.293Z"-}+}