main
Ray Publish 0.1.0 ef65e4c
{
  "slug": "ucc21739qdwrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Isolators - Gate Drivers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc21739qdwrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc21739qdwrq1.kicad_sym",
    "ucc21739qdwrq1.kicad_mod",
    "ucc21739qdwrq1.glb",
    "ucc21739qdwrq1.step",
    "ucc21739qdwrq1.lbr",
    "docs/hero.png",
    "docs/ucc21739qdwrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc21739qdwrq1-hero.glb",
    "ucc21739qdwrq1-hero.overlay.json",
    "ucc21739qdwrq1-etched.glb"
  ],
  "component": {
    "mpn": "UCC21739QDWRQ1",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "Isolators - Gate Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc21739-q1.pdf",
    "parts": {
      "symbol": "ucc21739qdwrq1.kicad_sym",
      "footprint": "ucc21739qdwrq1.kicad_mod",
      "model_3d": "ucc21739qdwrq1-hero.glb",
      "model_3d_plain": "ucc21739qdwrq1-etched.glb",
      "model_3d_step": "ucc21739qdwrq1-etched.step",
      "model_3d_step_plain": "ucc21739qdwrq1.step",
      "lbr": "ucc21739qdwrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C5216334",
      "digikey": "296-UCC21739QDWRQ1TR-ND",
      "mouser": "595-UCC21739QDWRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T08:21:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-UCC21739QDWRQ1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC21739QDWRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AIN",
        "type": "input",
        "description": "Isolated analog sensing input referenced to COM, specified at 0.6 V to 4.5 V; use a small capacitor to COM for noise immunity and tie to COM if unused."
      },
      {
        "number": "2",
        "name": "OC",
        "type": "input",
        "description": "Over-current detection input supporting a lower threshold for SenseFET, DESAT and shunt-resistor sensing, rated -0.3 V to 6 V referenced to COM; tie to COM if unused."
      },
      {
        "number": "3",
        "name": "COM",
        "type": "power_in",
        "description": "Common ground reference for the output side, connected to the IGBT emitter or SiC MOSFET source."
      },
      {
        "number": "4",
        "name": "OUTH",
        "type": "output",
        "description": "Gate driver pull-up output, rated DC from VEE-0.3 V to VDD and transient (<100 ns) from VEE-5 V to VDD+5 V."
      },
      {
        "number": "5",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive gate-drive supply referenced to COM, 13 V to 33 V recommended; bypass with a >10 µF capacitor to COM placed close to the pin."
      },
      {
        "number": "6",
        "name": "OUTL",
        "type": "output",
        "description": "Gate driver pull-down output, rated DC from VEE-0.3 V to VDD and transient (<100 ns) from VEE-5 V to VDD+5 V."
      },
      {
        "number": "7",
        "name": "CLMPE",
        "type": "output",
        "description": "External active Miller clamp drive output connecting to the gate of the external clamp MOSFET, rated -0.3 V to 5 V referenced to VEE; leave floating if unused."
      },
      {
        "number": "8",
        "name": "VEE",
        "type": "power_in",
        "description": "Negative gate-drive supply referenced to COM; bypass with a >10 µF capacitor to COM to support the specified sink peak current."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Input-side power supply and logic ground reference for VCC and the control inputs."
      },
      {
        "number": "10",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting gate driver control input referenced to GND, with high level at 0.7×VCC minimum and low level at 0.3×VCC maximum; tie to VCC if unused."
      },
      {
        "number": "11",
        "name": "IN-",
        "type": "input",
        "description": "Inverting gate driver control input referenced to GND, with high level at 0.7×VCC minimum and low level at 0.3×VCC maximum; tie to GND if unused."
      },
      {
        "number": "12",
        "name": "RDY",
        "type": "output",
        "description": "Open-drain power-good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals, with input/output current limited to 20 mA."
      },
      {
        "number": "13",
        "name": "FLT",
        "type": "output",
        "description": "Active-low open-drain fault alarm output asserted on over current or short circuit, which can be paralleled with other fault signals, with current limited to 20 mA."
      },
      {
        "number": "14",
        "name": "RST/EN",
        "type": "input",
        "description": "Enables or disables the output side (a low level turns the FET off) and resets an OC fault on FLT when held low for more than 1000 ns; rated GND-0.3 V to VCC DC."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Input-side supply from 3.0 V to 5.5 V referenced to GND; bypass with a >1 µF capacitor to GND placed close to the pin."
      },
      {
        "number": "16",
        "name": "APWM",
        "type": "output",
        "description": "Isolated analog sensing PWM output referenced to GND, with output current limited to 20 mA; leave floating if unused."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers and names were taken from Table 4-1 (Pin Functions) on page 3. The top-view figure text ; The package hint says SOIC-16-300mil, but the datasheet text only says 'DW (SOIC-16)' with a 10.3 mm; Pin 1 orientation and the package outline drawing are in Section 13, which is not included in the 12"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0044,
        "at": "2026-11-12T08:20:55"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc21739-q1.pdf",
        "pages": 60,
        "sha256": "e817e0d93b4e0af2",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc21739qdwrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc21739qdwrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f4d616a75beb5daaee188553aebe8a96c07e847b846c456b834305ccfedc9a44",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW0016B (SOIC DW, 16 pins)",
      "source_page": 57,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ucc21739qdwrq1.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}