main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc21739qdwrq1: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ucc21739qdwrq1-etched.glb Publish 0.1.0 · Ray
ucc21739qdwrq1-etched.step ucc21739qdwrq1: factory component page (tier=mfr) · Ray
ucc21739qdwrq1-hero.glb ucc21739qdwrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc21739qdwrq1-hero.overlay.json ucc21739qdwrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc21739qdwrq1.glb Publish 0.1.0 · Ray
ucc21739qdwrq1.kicad_mod Publish 0.1.0 · Ray
ucc21739qdwrq1.kicad_sym Publish 0.1.0 · Ray
ucc21739qdwrq1.lbr Publish 0.1.0 · Ray
ucc21739qdwrq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

UCC21739QDWRQ1

Texas Instruments · Isolators - Gate Drivers · SOIC-16-300mil

UCC21739QDWRQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AIN input Isolated analog sensing input referenced to COM, specified at 0.6 V to 4.5 V; use a small capacitor to COM for noise immunity and tie to COM if unused.
2 OC input Over-current detection input supporting a lower threshold for SenseFET, DESAT and shunt-resistor sensing, rated -0.3 V to 6 V referenced to COM; tie to COM if unused.
3 COM power_in Common ground reference for the output side, connected to the IGBT emitter or SiC MOSFET source.
4 OUTH output Gate driver pull-up output, rated DC from VEE-0.3 V to VDD and transient (<100 ns) from VEE-5 V to VDD+5 V.
5 VDD power_in Positive gate-drive supply referenced to COM, 13 V to 33 V recommended; bypass with a >10 µF capacitor to COM placed close to the pin.
6 OUTL output Gate driver pull-down output, rated DC from VEE-0.3 V to VDD and transient (<100 ns) from VEE-5 V to VDD+5 V.
7 CLMPE output External active Miller clamp drive output connecting to the gate of the external clamp MOSFET, rated -0.3 V to 5 V referenced to VEE; leave floating if unused.
8 VEE power_in Negative gate-drive supply referenced to COM; bypass with a >10 µF capacitor to COM to support the specified sink peak current.
9 GND power_in Input-side power supply and logic ground reference for VCC and the control inputs.
10 IN+ input Non-inverting gate driver control input referenced to GND, with high level at 0.7×VCC minimum and low level at 0.3×VCC maximum; tie to VCC if unused.
11 IN- input Inverting gate driver control input referenced to GND, with high level at 0.7×VCC minimum and low level at 0.3×VCC maximum; tie to GND if unused.
12 RDY output Open-drain power-good output for VCC-GND and VDD-COM that can be paralleled with other RDY signals, with input/output current limited to 20 mA.
13 FLT output Active-low open-drain fault alarm output asserted on over current or short circuit, which can be paralleled with other fault signals, with current limited to 20 mA.
14 RST/EN input Enables or disables the output side (a low level turns the FET off) and resets an OC fault on FLT when held low for more than 1000 ns; rated GND-0.3 V to VCC DC.
15 VCC power_in Input-side supply from 3.0 V to 5.5 V referenced to GND; bypass with a >1 µF capacitor to GND placed close to the pin.
16 APWM output Isolated analog sensing PWM output referenced to GND, with output current limited to 20 mA; leave floating if unused.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Power Management (PMIC)
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC supply voltage (VCC-GND) absolute maximum VCC -0.3 6 V 4
VDD supply voltage (VDD-COM) absolute maximum VDD -0.3 36 V 4
VEE supply voltage (VEE-COM) absolute maximum VEE -17.5 0.3 V 4
VDD-VEE absolute maximum VMAX -0.3 36 V 4
AIN analog sensing input absolute maximum AIN -0.3 5 V Reference to COM 4
OC input absolute maximum OC -0.3 6 V Reference to COM 4
CLMPE output absolute maximum CLMPE -0.3 5 V Reference to VEE 4
FLT and RDY pin input current absolute maximum IFLT, IRDY 20 mA 4
APWM pin output current absolute maximum IAPWM 20 mA 4
Junction temperature range absolute maximum TJ -40 150 °C 4
Storage temperature range Tstg -65 150 °C 4
VCC supply voltage (VCC-GND) recommended VCC 3 5.5 V 4
VDD supply voltage (VDD-COM) recommended VDD 13 33 V 4
VDD-VEE recommended maximum VMAX 33 V 4
AIN analog sensing input recommended AIN 0.6 4.5 V Reference to COM 4
Minimum RST/EN pulse width that resets the fault tRST/EN 800 ns 4
Ambient temperature range TA -40 125 °C 4
Junction temperature range recommended TJ -40 150 °C 4
Maximum power dissipation (both sides) PD 985 mW VCC = 5V, VDD-COM = 20V, COM-VEE = 5V, IN+/- = 5V, 150kHz, 50% Duty Cycle for 10nF load, Ta=25oC 5
Maximum power dissipation by transmitter side PD1 20 mW VCC = 5V, VDD-COM = 20V, COM-VEE = 5V, IN+/- = 5V, 150kHz, 50% Duty Cycle for 10nF load, Ta=25oC 5
Maximum power dissipation by receiver side PD2 965 mW VCC = 5V, VDD-COM = 20V, COM-VEE = 5V, IN+/- = 5V, 150kHz, 50% Duty Cycle for 10nF load, Ta=25oC 5
VCC UVLO on threshold VVCC_ON 2.55 2.7 2.85 V 8
VCC UVLO off threshold VVCC_OFF 2.35 2.5 2.65 V 8
VCC UVLO on delay to output high tVCC+ to OUT 29 37.8 50 µs IN+ = VCC, IN- = GND 8
VCC UVLO off delay to output low tVCC- to OUT 5 10 15 ns 8
VCC UVLO on delay to RDY high tVCC+ to RDY 30 37.8 50 ns RST/EN = VCC 8
VCC UVLO off delay to RDY low tVCC- to RDY 5 10 15 ns 8
VDD UVLO on threshold VVDD_ON 10.5 12 12.8 V 8
VDD UVLO off threshold VVDD_OFF 9.9 10.7 11.8 V 8
VDD UVLO on delay to output high tVDD+ to OUT 2 5 8 ns IN+ = VCC, IN- = GND 8
VCC quiescent current with OUT high IVCCQ 2.5 3 4 mA OUT(H) = High, fS = 0Hz, AIN=2V 8
VCC quiescent current with OUT low IVCCQ 1.45 2 2.75 mA OUT(L) = Low, fS = 0Hz, AIN=2V 8
VDD quiescent current with OUT high IVDDQ 3.6 4 5.9 mA OUT(H) = High, fS = 0Hz, AIN=2V 8
VDD quiescent current with OUT low IVDDQ 3.1 3.7 5.3 mA OUT(L) = Low, fS = 0Hz, AIN=2V 8
IN+, IN- and RST/EN deglitch filter time (ON and OFF) TINFIL 28 40 60 ns fS = 50kHz 8
Deglitch filter time to reset FLT TRSTFIL 500 650 800 ns 8
OC detection threshold VOCTH 0.63 0.7 0.77 V 8
OC fault deglitch filter tOCFIL 95 120 180 ns 8
OC propagation delay to OUT(L) 90% tOCOFF 150 270 400 ns 8
OC to FLT low delay tOCFLT 300 530 750 ns 8
2-level turn-off voltage threshold V2LOFF 8.3 9 10 V 8
Soft turn-off current on fault conditions ITL3 500 900 1200 mA 8
Miller clamp threshold voltage VCLMPTH 1.5 2 2.5 V Reference to VEE 8
Miller clamp output high voltage VCLMPE 4.4 5 5.3 V Reference to VEE 8
Miller clamp peak sink current ICLMPEL 0.12 0.25 0.37 A 9
Propagation delay High to Low tPDHL 60 90 130 ns 10
Propagation delay Low to High tPDLH 60 90 130 ns 10
Analog sensing voltage range VAIN 0.6 4.5 V 9
Internal current source IAIN 196 200 209 µA VAIN=2.5V, -40°C< TJ< 150°C 9
APWM output frequency fAPWM 380 400 420 kHz VAIN=2.5V 9
APWM duty cycle at VAIN 0.6V DAPWM 86.5 88 89.5 % VAIN = 0.6V 9
APWM duty cycle at VAIN 2.5V DAPWM 48.5 50 51.5 % VAIN = 2.5V 9
APWM duty cycle at VAIN 4.5V DAPWM 7.5 10 11.5 % VAIN = 4.5V 9
Junction-to-ambient thermal resistance RθJA 68.3 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 27.5 °C/W 5
Junction-to-board thermal resistance RθJB 32.9 °C/W 5

CAD (KiCad official)

  • Symbol: UCC21739QDWRQ1
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: ucc21739qdwrq1-etched.step / ucc21739qdwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc21739qdwrq1.step / ucc21739qdwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (60 pp, sha256 e817e0d93b4e0af2, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF