component
UCC21710DWR
Public Made by Adomby adom
Texas Instruments Isolators - Gate Drivers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 19h ago |
| viewers | 19h ago |
| package.json | 19h ago |
| page.json | 19h ago |
| README.md | 19h ago |
| ucc21710dwr-etched.glb | 19h ago |
| ucc21710dwr-etched.step | 19h ago |
| ucc21710dwr-hero.glb | 19h ago |
| ucc21710dwr-hero.overlay.json | 19h ago |
| ucc21710dwr.glb | 19h ago |
| ucc21710dwr.kicad_mod | 19h ago |
| ucc21710dwr.kicad_sym | 19h ago |
| ucc21710dwr.lbr | 19h ago |
| ucc21710dwr.step | 19h ago |
UCC21710DWR
Texas Instruments · Isolators - Gate Drivers · SOIC-16-300mil
UCC21710DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AIN | input | Isolated analog sensing input with small parallel capacitor to COM recommended for noise immunity. |
| 2 | OC | input | Over-current detection input supporting SenseFET, DESAT, and shunt resistor sensing methods. |
| 3 | COM | power_in | Common ground reference connected to IGBT emitter or SiC-MOSFET source. |
| 4 | OUTH | output | Gate driver high-side output with ±10A peak pull-up current capability. |
| 5 | VDD | power_in | Positive supply rail (13V to 33V) for isolated gate drive voltage stage. |
| 6 | OUTL | output | Gate driver low-side output with ±10A peak pull-down current capability. |
| 7 | CLMPI | output | Internal active Miller clamp output (4A maximum) connected to power transistor gate. |
| 8 | VEE | power_in | Negative supply rail for isolated gate drive voltage stage. |
| 9 | GND | power_in | Input-side ground reference for power and control logic. |
| 10 | IN+ | input | Non-inverting gate driver control input with logic thresholds 0 to 0.3×VCC (low) and 0.7×VCC to VCC (high). |
| 11 | IN- | input | Inverting gate driver control input with logic thresholds 0 to 0.3×VCC (low) and 0.7×VCC to VCC (high). |
| 12 | RDY | output | Power-good output indicating VCC-GND and VDD-COM readiness in open-drain configuration. |
| 13 | FLT | output | Active-low fault alarm output for over-current or short-circuit conditions in open-drain configuration. |
| 14 | RST/EN | input | Reset/Enable input providing output shutdown and fault reset with 1000ns minimum pulse width. |
| 15 | VCC | power_in | Input-side power supply (3V to 5.5V) for control logic stage. |
| 16 | APWM | output | Isolated analog-to-PWM sensing output for temperature or voltage conversion. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Power Management (PMIC) |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
UCC21710DWR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
ucc21710dwr-etched.step/ucc21710dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc21710dwr.step/ucc21710dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
c020d4f4b287e499, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).