Generated by kicad-footprint-generator · KiCad file format 20260206
TRSF3223EIPWR
Texas Instruments · RS232 ICs · TSSOP-20
TRSF3223EIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Receiver enable; when EN is high the receiver outputs are placed in high impedance (off), and when low the receivers are enabled. |
| 2 | C1+ | passive | Positive terminal of the charge-pump flying capacitor C1, which must use the recommended value (0.1 µF at VCC = 3.3 V ±0.3 V, 0.047 µF at VCC = 5 V ±0.5 V). |
| 3 | V+ | power_out | Positive charge-pump output rail used for the RS-232 driver high level; it must be bypassed with a ceramic capacitor as shown in the typical operating circuit. |
| 4 | C1− | passive | Negative terminal of the charge-pump flying capacitor C1, to be connected with the recommended capacitor value from the VCC versus capacitor table. |
| 5 | C2+ | passive | Positive terminal of the charge-pump flying capacitor C2, to be connected with the recommended capacitor value (0.33 µF at VCC = 5 V, 0.1 µF at VCC = 3.3 V per the table). |
| 6 | C2− | passive | Negative terminal of the charge-pump flying capacitor C2, to be connected with the recommended capacitor value from the VCC versus capacitor table. |
| 7 | V− | power_out | Negative charge-pump output rail used for the RS-232 driver low level; it must be bypassed with a ceramic capacitor as shown in the typical operating circuit. |
| 8 | DOUT2 | output | RS-232 driver 2 output; the RIN and DOUT pins are rated ±15 kV HBM ESD protected to GND and output voltage range is −13.2 V to 13.2 V. |
| 9 | RIN2 | input | RS-232 receiver 2 input, with a receiver input voltage range of −25 V to 25 V and an input resistance of 3 kΩ to 5 kΩ. |
| 10 | ROUT2 | output | CMOS-level output of receiver 2 that follows the RS-232 input level on RIN2. |
| 11 | INVALID | output | Goes high when any receiver input is a valid RS-232 level (greater than 2.7 V or less than −2.7 V) and goes low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs. |
| 12 | DIN2 | input | Driver 2 logic input; driver and control inputs accept 0 V to 5.5 V with VIL maximum of 0.8 V. |
| 13 | DIN1 | input | Driver 1 logic input; driver and control inputs accept 0 V to 5.5 V with VIL maximum of 0.8 V. |
| 14 | FORCEON | input | Auto-powerdown control input; when FORCEON is low and FORCEOFF is high, auto-powerdown is enabled, and when both are high it is disabled. |
| 15 | ROUT1 | output | CMOS-level output of receiver 1 that follows the RS-232 input level on RIN1. |
| 16 | RIN1 | input | RS-232 receiver 1 input, with a receiver input voltage range of −25 V to 25 V and an input resistance of 3 kΩ to 5 kΩ. |
| 17 | DOUT1 | output | RS-232 driver 1 output; the RIN and DOUT pins are rated ±15 kV HBM ESD protected to GND and output voltage range is −13.2 V to 13.2 V. |
| 18 | GND | power_in | Network ground; all voltages are referenced to this pin. |
| 19 | VCC | power_in | Device supply voltage, 3 V to 3.6 V (3.3 V nominal) or 4.5 V to 5.5 V (5 V nominal), with a 0.1 µF bypass capacitor between VCC and GND recommended. |
| 20 | FORCEOFF | input | Shutdown control input; when FORCEOFF is low the drivers and receivers are powered off with supply current reduced to 1 µA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
TRSF3223EIPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
trsf3223eipwr-etched.step/trsf3223eipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trsf3223eipwr.step/trsf3223eipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
12937657b0efb4a1, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).