main
Ray Publish 0.1.0 e307cb4
{
  "slug": "trsf3223eipwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments RS232 ICs, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "trsf3223eipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "trsf3223eipwr.kicad_sym",
    "trsf3223eipwr.kicad_mod",
    "trsf3223eipwr.glb",
    "trsf3223eipwr.step",
    "trsf3223eipwr.lbr",
    "docs/hero.png",
    "docs/trsf3223eipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "trsf3223eipwr-hero.glb",
    "trsf3223eipwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TRSF3223EIPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/trsf3223e",
    "parts": {
      "symbol": "trsf3223eipwr.kicad_sym",
      "footprint": "trsf3223eipwr.kicad_mod",
      "model_3d": "trsf3223eipwr-hero.glb",
      "model_3d_plain": "trsf3223eipwr.glb",
      "model_3d_step": "trsf3223eipwr-etched.step",
      "model_3d_step_plain": "trsf3223eipwr.step",
      "lbr": "trsf3223eipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671736",
      "digikey": "296-25085-2-ND",
      "mouser": "595-TRSF3223EIPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T19:11:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-25085-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TRSF3223EIPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Receiver enable; when EN is high the receiver outputs are placed in high impedance (off), and when low the receivers are enabled."
      },
      {
        "number": "2",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the charge-pump flying capacitor C1, which must use the recommended value (0.1 µF at VCC = 3.3 V ±0.3 V, 0.047 µF at VCC = 5 V ±0.5 V)."
      },
      {
        "number": "3",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge-pump output rail used for the RS-232 driver high level; it must be bypassed with a ceramic capacitor as shown in the typical operating circuit."
      },
      {
        "number": "4",
        "name": "C1−",
        "type": "passive",
        "description": "Negative terminal of the charge-pump flying capacitor C1, to be connected with the recommended capacitor value from the VCC versus capacitor table."
      },
      {
        "number": "5",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the charge-pump flying capacitor C2, to be connected with the recommended capacitor value (0.33 µF at VCC = 5 V, 0.1 µF at VCC = 3.3 V per the table)."
      },
      {
        "number": "6",
        "name": "C2−",
        "type": "passive",
        "description": "Negative terminal of the charge-pump flying capacitor C2, to be connected with the recommended capacitor value from the VCC versus capacitor table."
      },
      {
        "number": "7",
        "name": "V−",
        "type": "power_out",
        "description": "Negative charge-pump output rail used for the RS-232 driver low level; it must be bypassed with a ceramic capacitor as shown in the typical operating circuit."
      },
      {
        "number": "8",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver 2 output; the RIN and DOUT pins are rated ±15 kV HBM ESD protected to GND and output voltage range is −13.2 V to 13.2 V."
      },
      {
        "number": "9",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver 2 input, with a receiver input voltage range of −25 V to 25 V and an input resistance of 3 kΩ to 5 kΩ."
      },
      {
        "number": "10",
        "name": "ROUT2",
        "type": "output",
        "description": "CMOS-level output of receiver 2 that follows the RS-232 input level on RIN2."
      },
      {
        "number": "11",
        "name": "INVALID",
        "type": "output",
        "description": "Goes high when any receiver input is a valid RS-232 level (greater than 2.7 V or less than −2.7 V) and goes low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."
      },
      {
        "number": "12",
        "name": "DIN2",
        "type": "input",
        "description": "Driver 2 logic input; driver and control inputs accept 0 V to 5.5 V with VIL maximum of 0.8 V."
      },
      {
        "number": "13",
        "name": "DIN1",
        "type": "input",
        "description": "Driver 1 logic input; driver and control inputs accept 0 V to 5.5 V with VIL maximum of 0.8 V."
      },
      {
        "number": "14",
        "name": "FORCEON",
        "type": "input",
        "description": "Auto-powerdown control input; when FORCEON is low and FORCEOFF is high, auto-powerdown is enabled, and when both are high it is disabled."
      },
      {
        "number": "15",
        "name": "ROUT1",
        "type": "output",
        "description": "CMOS-level output of receiver 1 that follows the RS-232 input level on RIN1."
      },
      {
        "number": "16",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver 1 input, with a receiver input voltage range of −25 V to 25 V and an input resistance of 3 kΩ to 5 kΩ."
      },
      {
        "number": "17",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver 1 output; the RIN and DOUT pins are rated ±15 kV HBM ESD protected to GND and output voltage range is −13.2 V to 13.2 V."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Network ground; all voltages are referenced to this pin."
      },
      {
        "number": "19",
        "name": "VCC",
        "type": "power_in",
        "description": "Device supply voltage, 3 V to 3.6 V (3.3 V nominal) or 4.5 V to 5.5 V (5 V nominal), with a 0.1 µF bypass capacitor between VCC and GND recommended."
      },
      {
        "number": "20",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Shutdown control input; when FORCEOFF is low the drivers and receivers are powered off with supply current reduced to 1 µA typical."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-to-name assignment for pins 9 and 10 is ambiguous. The top-view name list gives RIN2 = 9 and; Pin 18 and pin 19 are assigned to GND and VCC from the order of the garbled top-view pin list (pins ; Pin descriptions are drawn from scattered text across pages 3, 4, 6, 7, 11 and 12 rather than a pin ",
          "1/20 pins cited to the wrong page (name found elsewhere): ['16:RIN1@p6']"
        ],
        "pages_sent": 31,
        "cost_usd": 0.1163,
        "at": "2026-10-11T19:11:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/trsf3223e",
        "pages": 31,
        "sha256": "12937657b0efb4a1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "trsf3223eipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "trsf3223eipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dda63881ec9db2973f7181b254009ace29fc49a9ae54ef8444c10ea5dd12682e",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}