main
History Download
Ray Publish 0.1.0 e307cb4

TRSF3223EIPWR

Texas Instruments · RS232 ICs · TSSOP-20

TRSF3223EIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Receiver enable; when EN is high the receiver outputs are placed in high impedance (off), and when low the receivers are enabled.
2 C1+ passive Positive terminal of the charge-pump flying capacitor C1, which must use the recommended value (0.1 µF at VCC = 3.3 V ±0.3 V, 0.047 µF at VCC = 5 V ±0.5 V).
3 V+ power_out Positive charge-pump output rail used for the RS-232 driver high level; it must be bypassed with a ceramic capacitor as shown in the typical operating circuit.
4 C1− passive Negative terminal of the charge-pump flying capacitor C1, to be connected with the recommended capacitor value from the VCC versus capacitor table.
5 C2+ passive Positive terminal of the charge-pump flying capacitor C2, to be connected with the recommended capacitor value (0.33 µF at VCC = 5 V, 0.1 µF at VCC = 3.3 V per the table).
6 C2− passive Negative terminal of the charge-pump flying capacitor C2, to be connected with the recommended capacitor value from the VCC versus capacitor table.
7 V− power_out Negative charge-pump output rail used for the RS-232 driver low level; it must be bypassed with a ceramic capacitor as shown in the typical operating circuit.
8 DOUT2 output RS-232 driver 2 output; the RIN and DOUT pins are rated ±15 kV HBM ESD protected to GND and output voltage range is −13.2 V to 13.2 V.
9 RIN2 input RS-232 receiver 2 input, with a receiver input voltage range of −25 V to 25 V and an input resistance of 3 kΩ to 5 kΩ.
10 ROUT2 output CMOS-level output of receiver 2 that follows the RS-232 input level on RIN2.
11 INVALID output Goes high when any receiver input is a valid RS-232 level (greater than 2.7 V or less than −2.7 V) and goes low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs.
12 DIN2 input Driver 2 logic input; driver and control inputs accept 0 V to 5.5 V with VIL maximum of 0.8 V.
13 DIN1 input Driver 1 logic input; driver and control inputs accept 0 V to 5.5 V with VIL maximum of 0.8 V.
14 FORCEON input Auto-powerdown control input; when FORCEON is low and FORCEOFF is high, auto-powerdown is enabled, and when both are high it is disabled.
15 ROUT1 output CMOS-level output of receiver 1 that follows the RS-232 input level on RIN1.
16 RIN1 input RS-232 receiver 1 input, with a receiver input voltage range of −25 V to 25 V and an input resistance of 3 kΩ to 5 kΩ.
17 DOUT1 output RS-232 driver 1 output; the RIN and DOUT pins are rated ±15 kV HBM ESD protected to GND and output voltage range is −13.2 V to 13.2 V.
18 GND power_in Network ground; all voltages are referenced to this pin.
19 VCC power_in Device supply voltage, 3 V to 3.6 V (3.3 V nominal) or 4.5 V to 5.5 V (5 V nominal), with a 0.1 µF bypass capacitor between VCC and GND recommended.
20 FORCEOFF input Shutdown control input; when FORCEOFF is low the drivers and receivers are powered off with supply current reduced to 1 µA typical.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Interface
Pins 20

CAD (KiCad official)

  • Symbol: TRSF3223EIPWR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: trsf3223eipwr-etched.step / trsf3223eipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); trsf3223eipwr.step / trsf3223eipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 12937657b0efb4a1, retrieved 2026-10-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF