component

TPSM33620S5QRDNRQ1

Public Made by Adom

by adom

Texas Instruments DC DC Converters, QFN-11(3.5x4.5). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentpower modulestpsm33620s5qrdnrq1board-derived

Verified TPSM33620S5QRDNRQ1

by Claude, at Caleb Taylor's request · last 28 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

28 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's TPSM336xx-Q1 datasheet (SNVSCS7E, revised September 2026)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SNVSCS7E, April 2025, revised September 2026; sha256 9ecee6f360918744 matches ti.com/lit/ds/symlink/tpsm33620-q1.pdf fetched 2026-10-27); edition now recorded
  • ✓Orderable TPSM33620S5QRDNRQ1 is the TPSM33620-Q1 2 A, 5V fixed / adjustable, spread-spectrum option (Device Comparison Table, p.4); Active, QFN-FCMOD RDN, 3000 large T&R, marking 33620S5Q (p.41)
  • ✓All 11 pins match the Pin Functions table and Figure 5-1 (RDN 11-pin QFN-FCMOD top view, all variants, p.5) by number and name: PGOOD, EN, VIN, VOUT, SW, SW, BOOT, VCC, FB, GND, MODE/SYNC; no renames needed
  • ✓Pin types against the table (A = analog, P = power, G = ground): PGOOD output -> open_collector (open-drain output), VCC output -> power_out (internal LDO output), BOOT input -> passive (internal bootstrap node, needs no external connection); SW 5/6 kept passive (switch node, must not be connected); VIN power_in, VOUT power_out, GND power_in, EN/FB/MODE/SYNC input
  • ✓All 11 descriptions rewritten to the table wording (p.5); the earlier pin 5 and 6 text both said 'in parallel with pin 6', and others added facts not in the pin table (3V to 36V range on VIN, Auto/pulse-skipping wording)
  • ✓Footprint vs RDN0011B (p.46-47, drawing 4231197/C 05/2026): 11 pads in TI's top-view arrangement, pin 1 top-left, 1-3 down the left, 4/5 large pads lower left/right, 6-8 up the right, 9/10/11 along the top. Copper vs TI's land pattern example: pins 2/3/6/7 1.20 x 0.35 at x = ±1.40, y = -1.15/-0.65 (TI 1.1 x 0.25 at y 1.15/0.65); pins 1/8 1.20 x 0.475 at y = -1.962 (TI 1.125 x 0.37 at y 1.96); pins 9/11 0.35 x 0.90 at x = ±0.50, y = -2.05 (TI 0.25 x 0.8 at x 0.5, y 2.06); pads 4/5 1.60 x 2.15 at (±1.20, 1.00) (TI land x 0.45-1.95, y 0.025-2.02); every copper pad covers TI's land
  • •Pads 4, 5 and 10 are copper-only with separate F.Mask/F.Paste polygons: pads 4/5 mask x ±0.45..±1.95, y -0.025..2.025 with the notched outer edge of TI's drawing; pin 10 mask/paste 0.30 x 1.525 at y -2.45..-0.924 (TI (0.3) x (1.52)); pin 10 copper continues 0.44 mm wide under the body between pads 4 and 5 to y = 2.075, under solder mask, like TI's ground strip with optional vias; copper-to-copper gap to pads 4/5 is 0.18 mm
  • ✓3D model rebuilt (tier 3): the previous model, extracted from a board STEP (designer library Regulator_CDT), carried no licence. Tier 1 unusable: TI's RDN CAD is offered only through Ultra Librarian (reCAPTCHA + registration; its terms forbid creating libraries for distribution; the listed model is PSM33620S3QRDNRQ1). Tier 2: KiCad has no RDN0011B/QFN-FCMOD model. Hand-built in CadQuery from the RDN0011B outline (p.46, 4231197/C 05/2026), CC-BY-SA-4.0
  • ✓3D body vs RDN0011B (p.46-47): 3.50 x 4.50 x 2.00 mm (D 3.4-3.6, E 4.4-4.6, A 1.9-2.1); pads 4/5 1.10 x 2.05 with four 0.25 x 0.2 tabs each at 0.30 + 0.5k; pins 2/3/6/7 0.25 x 0.90 at 0.65/1.15; pins 1/8 0.37 x 0.925 centred 1.96 (land pattern (1.96)), pin 1 chamfered; pins 9/11 0.25 x 0.60 at x = +/-0.5; pin 10 0.30 x 1.35; terminals 0.20 thick, exposed on the side walls as the side view shows. Overlaid on TI's bottom view at 157.6 px/mm, every edge on TI's lines (docs/proof/tpsm33620s5qrdnrq1-3d-vs-drawing.png)
  • ✓Pose: Z-up, seated on z = 0, pin 1 top-left over pad 1 with a dimple in the drawing's pin-1 index area, footprint binding identity; step_pose.py PASS (centre 0.212 mm from the pad-pattern centre, which is asymmetric); MPN etched on top with adom-chip-laser 0.2.0; GLBs from step2glb 0.13.2 with PBR materials
  • •Not modelled: the outline's second line 0.05 mm inside the body edge (reference only) and the undimensioned tie-bar ticks on the bottom edge; A modelled at 2.00 (TI's outline view draws the 2.1 maximum)
  • ✓DigiKey 296-TPSM33620S5QRDNRQ1TR-ND (tape and reel) and Mouser 595-SM33620S5QRDNRQ1 (both product URLs name TPSM33620S5QRDNRQ1) kept and added to specs
  • •The footprint still carries a hidden SUB property naming TPSM33610S5QRDNRQ1 (the 1 A option in the same RDN package and pinout, p.4-5) and the tag TPSM33625RDNR from the designer's library; these are not errors in the pads but are not this MPN
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass; adom-lbr validate OK
Evidence3D model over TI's bottom view3D model provenance
Verified files✓ tpsm33620s5qrdnrq1.kicad_sym✓ tpsm33620s5qrdnrq1.kicad_mod✓ tpsm33620s5qrdnrq1.step
16 Oct 2026Claude (AI build)3D model provenance: extracted from the source board STEP export (designer custom library ...superseded
reviewfor all variants
  • •3D model provenance: extracted from the source board STEP export (designer custom library Regulator_CDT); the upstream model licence is not stated, so the page licence is NOASSERTION.
16 Oct 2026Claude (AI build)The board stores this symbol under the library name Connector_Generic:Conn_02x03_Odd_Even ...superseded
reviewfor all variants
  • •The board stores this symbol under the library name Connector_Generic:Conn_02x03_Odd_Even (hand-edited) with cached fields naming TPSM33610S5QRDNRQ1 / TPSM33606S5QRDNRQ1; those fields are corrected on this page.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓11 of 11 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! tpsm33620s5qrdnrq1.kicad_sym! tpsm33620s5qrdnrq1.kicad_mod! tpsm33620s5qrdnrq1.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
tpsm33620s5qrdnrq1 / tpsm33620s5qrdnrq1-hero.overlay.json
HistoryDownload
Caleb Publish 0.1.1 d05c478 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331
{
  "spec": "adom-hero 1.4",
  "mpn": "TPSM33620S5QRDNRQ1",
  "kind": "component + footprint reference art",
  "board_use": false,
  "plane_z_mm": -0.02,
  "units": "metre",
  "upAxis": "Z",
  "layers": {
    "pad_outlines": {
      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",
      "rgba": [
        0.0,
        0.902,
        0.863,
        0.5
      ],
      "pads": 11,
      "span_mm": 5.2,
      "dash_mm": 0.13,
      "gap_mm": 0.078,
      "pad_stroke_mm": 0.0312
    },
    "silkscreen": {
      "material": "Silkscreen reference lines - 30 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.3
      ],
      "footprint_items": 8,
      "pin1": {
        "source": "added dot (AI)",
        "pad": "1",
        "center_mm": [
          -1.4,
          -2.504
        ],
        "r_mm": 0.104
      }
    },
    "signal_names": {
      "material": "Signal names - 50 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.5
      ],
      "font": "DejaVu Sans Mono",
      "labels": 11,
      "sides": "top + mirrored underside (single-sided)",
      "fallback_to_pad_number": 0
    }
  },
  "align": {
    "ok": true,
    "centre_offset_mm": 0.212,
    "tolerance_mm": 0.366,
    "orientation_flipped": false,
    "contacts_bbox_mm": [
      -1.75,
      1.75,
      -2.25,
      2.25
    ],
    "pads_bbox_mm": [
      -2.0,
      2.0,
      -2.075,
      2.5
    ],
    "seating_z_mm": -0.0
  },
  "sources": {
    "glb": "tpsm33620s5qrdnrq1-etched.glb",
    "glb_sha256": "ffa9f5fe2a5510cda6f807ccb543a269c3ab492d4701312db8dbf5d77c98f2d3",
    "footprint": "tpsm33620s5qrdnrq1.kicad_mod",
    "footprint_sha256": "ce62003b474b22cfe63860f53dbed247918072a3f7c3b6ff93c6e4247c7cc86e",
    "pins": "page.json component.pins",
    "pins_sha256": "fa0e6214d70725c85943d124d120beaf83a9ddc40a9961cb3ef21131b01b1056"
  },
  "generator": "adom-wiki 1.8.0 (component_hero)",
  "labels": [
    {
      "pad": "1",
      "text": "PGOOD",
      "x": -2.102,
      "y": -1.962,
      "align": "right",
      "vertical": false,
      "h": 0.406
    },
    {
      "pad": "2",
      "text": "EN",
      "x": -2.1,
      "y": -1.15,
      "align": "right",
      "vertical": false,
      "h": 0.25
    },
    {
      "pad": "3",
      "text": "VIN",
      "x": -2.1,
      "y": -0.65,
      "align": "right",
      "vertical": false,
      "h": 0.25
    },
    {
      "pad": "4",
      "text": "VOUT",
      "x": -1.2,
      "y": 2.225,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "5",
      "text": "SW",
      "x": 1.2,
      "y": 2.225,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "6",
      "text": "SW",
      "x": 2.1,
      "y": -0.65,
      "align": "left",
      "vertical": false,
      "h": 0.25
    },
    {
      "pad": "7",
      "text": "BOOT",
      "x": 2.1,
      "y": -1.15,
      "align": "left",
      "vertical": false,
      "h": 0.25
    },
    {
      "pad": "8",
      "text": "VCC",
      "x": 2.102,
      "y": -1.962,
      "align": "left",
      "vertical": false,
      "h": 0.406
    },
    {
      "pad": "9",
      "text": "FB",
      "x": 0.5,
      "y": -2.612,
      "align": "left",
      "vertical": true,
      "h": 0.45
    },
    {
      "pad": "10",
      "text": "GND",
      "x": 0.0,
      "y": -2.65,
      "align": "left",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "11",
      "text": "MODE/SYNC",
      "x": -0.5,
      "y": -2.612,
      "align": "left",
      "vertical": true,
      "h": 0.45
    }
  ],
  "pads": [
    {
      "number": "1",
      "shape": "roundrect",
      "center_mm": [
        -1.4,
        -1.962
      ],
      "size_mm": [
        1.2,
        0.475
      ],
      "rot": 0.0
    },
    {
      "number": "2",
      "shape": "roundrect",
      "center_mm": [
        -1.4,
        -1.15
      ],
      "size_mm": [
        1.2,
        0.349999
      ],
      "rot": 0.0
    },
    {
      "number": "3",
      "shape": "roundrect",
      "center_mm": [
        -1.4,
        -0.650002
      ],
      "size_mm": [
        1.2,
        0.349999
      ],
      "rot": 0.0
    },
    {
      "number": "4",
      "shape": "roundrect",
      "center_mm": [
        -1.200001,
        1.000001
      ],
      "size_mm": [
        1.599999,
        2.150001
      ],
      "rot": 0.0
    },
    {
      "number": "5",
      "shape": "roundrect",
      "center_mm": [
        1.200001,
        1.000001
      ],
      "size_mm": [
        1.599999,
        2.150001
      ],
      "rot": 0.0
    },
    {
      "number": "6",
      "shape": "roundrect",
      "center_mm": [
        1.4,
        -0.650002
      ],
      "size_mm": [
        1.2,
        0.349999
      ],
      "rot": 0.0
    },
    {
      "number": "7",
      "shape": "roundrect",
      "center_mm": [
        1.4,
        -1.15
      ],
      "size_mm": [
        1.2,
        0.349999
      ],
      "rot": 0.0
    },
    {
      "number": "8",
      "shape": "roundrect",
      "center_mm": [
        1.4,
        -1.962
      ],
      "size_mm": [
        1.2,
        0.475
      ],
      "rot": 0.0
    },
    {
      "number": "9",
      "shape": "roundrect",
      "center_mm": [
        0.499999,
        -2.049998
      ],
      "size_mm": [
        0.349999,
        0.900001
      ],
      "rot": 0.0
    },
    {
      "number": "10",
      "shape": "custom",
      "center_mm": [
        0.0,
        -1.005
      ],
      "size_mm": [
        0.380132,
        0.380132
      ],
      "rot": 0.0
    },
    {
      "number": "11",
      "shape": "roundrect",
      "center_mm": [
        -0.499999,
        -2.049998
      ],
      "size_mm": [
        0.349999,
        0.900001
      ],
      "rot": 0.0
    }
  ]
}