component

TPSM33620S5QRDNRQ1

Public Made by Adom

by adom

Texas Instruments DC DC Converters, QFN-11(3.5x4.5). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentpower modulestpsm33620s5qrdnrq1board-derived

Verified TPSM33620S5QRDNRQ1

by Claude, at Caleb Taylor's request · last 28 Oct 2026 · 1 record, 3 retired · files match
SymbolFootprint3D modelPins

Verification log 4 records

28 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's TPSM336xx-Q1 datasheet (SNVSCS7E, revised September 2026)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SNVSCS7E, April 2025, revised September 2026; sha256 9ecee6f360918744 matches ti.com/lit/ds/symlink/tpsm33620-q1.pdf fetched 2026-10-27); edition now recorded
  • ✓Orderable TPSM33620S5QRDNRQ1 is the TPSM33620-Q1 2 A, 5V fixed / adjustable, spread-spectrum option (Device Comparison Table, p.4); Active, QFN-FCMOD RDN, 3000 large T&R, marking 33620S5Q (p.41)
  • ✓All 11 pins match the Pin Functions table and Figure 5-1 (RDN 11-pin QFN-FCMOD top view, all variants, p.5) by number and name: PGOOD, EN, VIN, VOUT, SW, SW, BOOT, VCC, FB, GND, MODE/SYNC; no renames needed
  • ✓Pin types against the table (A = analog, P = power, G = ground): PGOOD output -> open_collector (open-drain output), VCC output -> power_out (internal LDO output), BOOT input -> passive (internal bootstrap node, needs no external connection); SW 5/6 kept passive (switch node, must not be connected); VIN power_in, VOUT power_out, GND power_in, EN/FB/MODE/SYNC input
  • ✓All 11 descriptions rewritten to the table wording (p.5); the earlier pin 5 and 6 text both said 'in parallel with pin 6', and others added facts not in the pin table (3V to 36V range on VIN, Auto/pulse-skipping wording)
  • ✓Footprint vs RDN0011B (p.46-47, drawing 4231197/C 05/2026): 11 pads in TI's top-view arrangement, pin 1 top-left, 1-3 down the left, 4/5 large pads lower left/right, 6-8 up the right, 9/10/11 along the top. Copper vs TI's land pattern example: pins 2/3/6/7 1.20 x 0.35 at x = ±1.40, y = -1.15/-0.65 (TI 1.1 x 0.25 at y 1.15/0.65); pins 1/8 1.20 x 0.475 at y = -1.962 (TI 1.125 x 0.37 at y 1.96); pins 9/11 0.35 x 0.90 at x = ±0.50, y = -2.05 (TI 0.25 x 0.8 at x 0.5, y 2.06); pads 4/5 1.60 x 2.15 at (±1.20, 1.00) (TI land x 0.45-1.95, y 0.025-2.02); every copper pad covers TI's land
  • •Pads 4, 5 and 10 are copper-only with separate F.Mask/F.Paste polygons: pads 4/5 mask x ±0.45..±1.95, y -0.025..2.025 with the notched outer edge of TI's drawing; pin 10 mask/paste 0.30 x 1.525 at y -2.45..-0.924 (TI (0.3) x (1.52)); pin 10 copper continues 0.44 mm wide under the body between pads 4 and 5 to y = 2.075, under solder mask, like TI's ground strip with optional vias; copper-to-copper gap to pads 4/5 is 0.18 mm
  • ✓3D model rebuilt (tier 3): the previous model, extracted from a board STEP (designer library Regulator_CDT), carried no licence. Tier 1 unusable: TI's RDN CAD is offered only through Ultra Librarian (reCAPTCHA + registration; its terms forbid creating libraries for distribution; the listed model is PSM33620S3QRDNRQ1). Tier 2: KiCad has no RDN0011B/QFN-FCMOD model. Hand-built in CadQuery from the RDN0011B outline (p.46, 4231197/C 05/2026), CC-BY-SA-4.0
  • ✓3D body vs RDN0011B (p.46-47): 3.50 x 4.50 x 2.00 mm (D 3.4-3.6, E 4.4-4.6, A 1.9-2.1); pads 4/5 1.10 x 2.05 with four 0.25 x 0.2 tabs each at 0.30 + 0.5k; pins 2/3/6/7 0.25 x 0.90 at 0.65/1.15; pins 1/8 0.37 x 0.925 centred 1.96 (land pattern (1.96)), pin 1 chamfered; pins 9/11 0.25 x 0.60 at x = +/-0.5; pin 10 0.30 x 1.35; terminals 0.20 thick, exposed on the side walls as the side view shows. Overlaid on TI's bottom view at 157.6 px/mm, every edge on TI's lines (docs/proof/tpsm33620s5qrdnrq1-3d-vs-drawing.png)
  • ✓Pose: Z-up, seated on z = 0, pin 1 top-left over pad 1 with a dimple in the drawing's pin-1 index area, footprint binding identity; step_pose.py PASS (centre 0.212 mm from the pad-pattern centre, which is asymmetric); MPN etched on top with adom-chip-laser 0.2.0; GLBs from step2glb 0.13.2 with PBR materials
  • •Not modelled: the outline's second line 0.05 mm inside the body edge (reference only) and the undimensioned tie-bar ticks on the bottom edge; A modelled at 2.00 (TI's outline view draws the 2.1 maximum)
  • ✓DigiKey 296-TPSM33620S5QRDNRQ1TR-ND (tape and reel) and Mouser 595-SM33620S5QRDNRQ1 (both product URLs name TPSM33620S5QRDNRQ1) kept and added to specs
  • •The footprint still carries a hidden SUB property naming TPSM33610S5QRDNRQ1 (the 1 A option in the same RDN package and pinout, p.4-5) and the tag TPSM33625RDNR from the designer's library; these are not errors in the pads but are not this MPN
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass; adom-lbr validate OK
Evidence3D model over TI's bottom view3D model provenance
Verified files✓ tpsm33620s5qrdnrq1.kicad_sym✓ tpsm33620s5qrdnrq1.kicad_mod✓ tpsm33620s5qrdnrq1.step
16 Oct 2026Claude (AI build)3D model provenance: extracted from the source board STEP export (designer custom library ...superseded
reviewfor all variants
  • •3D model provenance: extracted from the source board STEP export (designer custom library Regulator_CDT); the upstream model licence is not stated, so the page licence is NOASSERTION.
16 Oct 2026Claude (AI build)The board stores this symbol under the library name Connector_Generic:Conn_02x03_Odd_Even ...superseded
reviewfor all variants
  • •The board stores this symbol under the library name Connector_Generic:Conn_02x03_Odd_Even (hand-edited) with cached fields naming TPSM33610S5QRDNRQ1 / TPSM33606S5QRDNRQ1; those fields are corrected on this page.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓11 of 11 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! tpsm33620s5qrdnrq1.kicad_sym! tpsm33620s5qrdnrq1.kicad_mod! tpsm33620s5qrdnrq1.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component CAD, datasheet and docs (2)

Caleb ·6c80a5ea63 ·13d ago ·parent ef14d77
3 files changed +23966 diff truncated
docs/hero.pngtpsm33620s5qrdnrq1.lbr+144tpsm33620s5qrdnrq1.step+23822
docs/hero.pngadded
⋯ 1 unchanged line ⋯
tpsm33620s5qrdnrq1.lbradded+144
@@ -0,0 +1,144 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>TPSM33620-Q1 automotive 3 V to 36 V input, 2 A synchronous buck power module, 5 V fixed / adjustable output (S5 option)</description>+<packages>+<package name="TPSM33620S5QRDNRQ1">+  <description>11 pads, 4.0 x 4.6 mm</description>+  <smd name="1" x="-1.4000" y="1.9620" dx="1.2000" dy="0.4750" layer="1" roundness="50"/>+  <smd name="2" x="-1.4000" y="1.1500" dx="1.2000" dy="0.3500" layer="1" roundness="50"/>+  <smd name="3" x="-1.4000" y="0.6500" dx="1.2000" dy="0.3500" layer="1" roundness="50"/>+  <smd name="4" x="-1.2000" y="-1.0000" dx="1.6000" dy="2.1500" layer="1" roundness="31" cream="no" stop="no"/>+  <smd name="5" x="1.2000" y="-1.0000" dx="1.6000" dy="2.1500" layer="1" roundness="31" cream="no" stop="no"/>+  <smd name="6" x="1.4000" y="0.6500" dx="1.2000" dy="0.3500" layer="1" roundness="50"/>+  <smd name="7" x="1.4000" y="1.1500" dx="1.2000" dy="0.3500" layer="1" roundness="50"/>+  <smd name="8" x="1.4000" y="1.9620" dx="1.2000" dy="0.4750" layer="1" roundness="50"/>+  <smd name="9" x="0.5000" y="2.0500" dx="0.3500" dy="0.9000" layer="1" roundness="50"/>+  <smd name="10" x="0.0000" y="1.0050" dx="0.3801" dy="0.3801" layer="1" cream="no" stop="no"/>+  <smd name="11" x="-0.5000" y="2.0500" dx="0.3500" dy="0.9000" layer="1" roundness="50"/>+  <circle x="-2.5000" y="1.9620" radius="0.1250" width="0.2500" layer="21"/>+  <wire x1="-2.1000" y1="2.6000" x2="-1.0500" y2="2.6000" width="0.1500" layer="21"/>+  <wire x1="-2.1000" y1="2.5745" x2="-2.1000" y2="2.6000" width="0.1500" layer="21"/>+  <wire x1="-2.1000" y1="-2.4250" x2="-2.1000" y2="-2.2750" width="0.1500" layer="21"/>+  <wire x1="-2.1000" y1="-2.4250" x2="2.1000" y2="-2.4250" width="0.1500" layer="21"/>+  <wire x1="1.0500" y1="2.6000" x2="2.1000" y2="2.6000" width="0.1500" layer="21"/>+  <wire x1="2.1000" y1="2.5745" x2="2.1000" y2="2.6000" width="0.1500" layer="21"/>+  <wire x1="2.1000" y1="-2.4250" x2="2.1000" y2="-2.2750" width="0.1500" layer="21"/>+  <wire x1="-1.8000" y1="2.3000" x2="1.8000" y2="2.3000" width="0.1500" layer="51"/>+  <wire x1="-1.8000" y1="-2.3000" x2="-1.8000" y2="2.3000" width="0.1500" layer="51"/>+  <wire x1="-1.8000" y1="-2.3000" x2="1.8000" y2="-2.3000" width="0.1500" layer="51"/>+  <wire x1="1.8000" y1="-2.3000" x2="1.8000" y2="2.3000" width="0.1500" layer="51"/>+  <text x="0" y="3.200" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-3.025" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TPSM33620S5QRDNRQ1">+  <description>TPSM33620-Q1 automotive 3 V to 36 V input, 2 A synchronous buck power module, 5 V fixed / adjustable output (S5 option)</description>+  <wire x1="-13.97" y1="17.78" x2="13.97" y2="17.78" width="0.254" layer="94"/>+  <wire x1="13.97" y1="17.78" x2="13.97" y2="-15.240000000000002" width="0.254" layer="94"/>+  <wire x1="13.97" y1="-15.240000000000002" x2="-13.97" y2="-15.240000000000002" width="0.254" layer="94"/>+  <wire x1="-13.97" y1="-15.240000000000002" x2="-13.97" y2="17.78" width="0.254" layer="94"/>+  <text x="4.4450" y="16.5100" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="4.4450" y="14.6050" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="PGOOD" x="19.05" y="15.24" length="middle" direction="out" rot="R180"/>+  <pin name="EN" x="-19.05" y="12.7" length="middle" direction="in"/>+  <pin name="VIN" x="-19.05" y="-10.159999999999998" length="middle" direction="pwr"/>+  <pin name="VOUT" x="-19.05" y="-12.700000000000001" length="middle" direction="out"/>+  <pin name="SW" x="-19.05" y="2.540000000000001" length="middle" direction="pas"/>+  <pin name="SW@2" x="-19.05" y="0" length="middle" direction="pas"/>+  <pin name="BOOT" x="-19.05" y="15.24" length="middle" direction="in"/>+  <pin name="VCC" x="-19.05" y="-7.619999999999999" length="middle" direction="out"/>+  <pin name="FB" x="-19.05" y="10.16" length="middle" direction="in"/>+  <pin name="GND" x="-19.05" y="-5.08" length="middle" direction="pwr"/>+  <pin name="MODE/SYNC" x="-19.05" y="7.62" length="middle" direction="in"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TPSM33620S5QRDNRQ1" prefix="U">+  <description>TPSM33620-Q1 automotive 3 V to 36 V input, 2 A synchronous buck power module, 5 V fixed / adjustable output (S5 option)</description>+  <gates>+    <gate name="G$1" symbol="TPSM33620S5QRDNRQ1" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="TPSM33620S5QRDNRQ1">+      <connects>+        <connect gate="G$1" pin="PGOOD" pad="1"/>+        <connect gate="G$1" pin="EN" pad="2"/>+        <connect gate="G$1" pin="VIN" pad="3"/>+        <connect gate="G$1" pin="VOUT" pad="4"/>+        <connect gate="G$1" pin="SW" pad="5"/>+        <connect gate="G$1" pin="SW@2" pad="6"/>+        <connect gate="G$1" pin="BOOT" pad="7"/>+        <connect gate="G$1" pin="VCC" pad="8"/>+        <connect gate="G$1" pin="FB" pad="9"/>+        <connect gate="G$1" pin="GND" pad="10"/>+        <connect gate="G$1" pin="MODE/SYNC" pad="11"/>+      </connects>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="TPSM33620S5QRDNRQ1" constant="no"/>+          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+          <attribute name="DATASHEET" value="https://www.ti.com/lit/ds/symlink/tpsm33620-q1.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/tpsm33620s5qrdnrq1" constant="no"/>+          <attribute name="MOUSER_PN" value="595-SM33620S5QRDNRQ1" constant="no"/>+          <attribute name="DIGIKEY_PN" value="296-TPSM33620S5QRDNRQ1TR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C51956999" constant="no"/>+        </technology>+      </technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file
tpsm33620s5qrdnrq1.stepadded+23822
@@ -0,0 +1,44042 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-16T23:13:35',('Author'),(+    'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+  ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+  'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+  'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('Open CASCADE STEP translator 7.9 8',+  'Open CASCADE STEP translator 7.9 8','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15),#19);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#23)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#20,#21,#22)) REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#20 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#21 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#22 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#23 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#20,+  'distance_accuracy_value','confusion accuracy');+#24 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#25 = SHAPE_DEFINITION_REPRESENTATION(#26,#32);+#26 = PRODUCT_DEFINITION_SHAPE('','',#27);+#27 = PRODUCT_DEFINITION('design','',#28,#31);+#28 = PRODUCT_DEFINITION_FORMATION('','',#29);+#29 = PRODUCT('TPSM336_Buck','TPSM336_Buck','',(#30));+#30 = PRODUCT_CONTEXT('',#2,'mechanical');+#31 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#32 = SHAPE_REPRESENTATION('',(#11,#33),#37);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(0.,0.,0.));+#35 = DIRECTION('',(0.,0.,1.));+#36 = DIRECTION('',(1.,0.,0.));+#37 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#41)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#38,#39,#40)) REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#38 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#39 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#40 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#41 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#38,+  'distance_accuracy_value','confusion accuracy');+#42 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43,#45);+#43 = ( REPRESENTATION_RELATIONSHIP('','',#32,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#44) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#44 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#45 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#46);+#46 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('56','','',#5,#27,$);+#47 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#29));+#48 = SHAPE_DEFINITION_REPRESENTATION(#49,#55);+#49 = PRODUCT_DEFINITION_SHAPE('','',#50);+#50 = PRODUCT_DEFINITION('design','',#51,#54);+#51 = PRODUCT_DEFINITION_FORMATION('','',#52);+#52 = PRODUCT('RDN0011A_ASM','RDN0011A_ASM','',(#53));+#53 = PRODUCT_CONTEXT('',#2,'mechanical');+#54 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#55 = SHAPE_REPRESENTATION('',(#11,#56,#60),#64);+#56 = AXIS2_PLACEMENT_3D('',#57,#58,#59);+#57 = CARTESIAN_POINT('',(-1.75,-2.25,3.185595530422E-02));+#58 = DIRECTION('',(0.,0.,1.));+#59 = DIRECTION('',(1.,0.,0.));+#60 = AXIS2_PLACEMENT_3D('',#61,#62,#63);+#61 = CARTESIAN_POINT('',(-1.600537960604,-1.814307338501,0.125));+#62 = DIRECTION('',(0.,0.,1.));+#63 = DIRECTION('',(1.,0.,0.));+#64 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#68)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#65,#66,#67)) REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#65 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#66 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#67 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#68 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#65,+  'distance_accuracy_value','confusion accuracy');+#69 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#70,#72);+#70 = ( REPRESENTATION_RELATIONSHIP('','',#55,#32) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#71) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#71 = ITEM_DEFINED_TRANSFORMATION('','',#11,#33);+#72 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#73);+#73 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('55','=>0:1:1:3','',#27,#50,$);+#74 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#52));+#75 = SHAPE_DEFINITION_REPRESENTATION(#76,#82);+#76 = PRODUCT_DEFINITION_SHAPE('','',#77);+#77 = PRODUCT_DEFINITION('design','',#78,#81);+#78 = PRODUCT_DEFINITION_FORMATION('','',#79);+#79 = PRODUCT('MOLD_CPOMPOUND_AF0','MOLD_CPOMPOUND_AF0','',(#80));+#80 = PRODUCT_CONTEXT('',#2,'mechanical');+#81 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#82 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#83),#17343);+#83 = MANIFOLD_SOLID_BREP('',#84);+#84 = CLOSED_SHELL('',(#85,#205,#509,#680,#851,#1022,#3651,#3822,#3993,+    #4164,#4240,#5485,#5680,#5707,#5734,#5761,#5788,#5795,#5844,#5893,+    #5920,#5927,#5976,#6025,#6074,#6189,#6238,#6880,#6929,#6978,#7054,+    #7081,#7130,#7274,#7301,#7328,#7355,#7362,#7389,#7396,#7403,#7644,+    #7671,#7698,#7725,#7752,#7779,#7806,#7813,#7862,#7911,#7938,#7945,+    #7994,#8043,#8092,#8146,#8195,#8244,#8271,#8355,#8404,#8453,#8480,+    #8487,#9739,#10638,#10833,#10882,#10931,#11002,#11073,#11144,#11215,+    #11403,#11430,#11477,#11524,#11571,#11618,#11625,#11632,#11639,+    #11646,#11653,#11660,#11667,#11674,#11681,#11730,#11871,#11898,+    #11925,#11952,#11979,#12006,#12013,#12040,#12067,#12094,#12121,+    #12128,#12155,#12182,#12209,#12236,#12243,#12270,#12297,#12324,+    #12351,#12358,#12385,#12412,#12439,#12466,#12493,#12520,#12547,+    #12574,#12601,#12628,#12635,#12662,#12689,#12716,#12743,#12750,+    #12799,#12848,#12897,#12946,#13000,#13049,#13103,#13152,#13179,+    #13265,#13314,#13363,#13390,#13397,#13446,#13495,#13549,#13598,+    #13625,#13707,#13756,#13805,#13832,#13839,#13888,#13937,#13986,+    #14040,#14089,#14138,#14165,#14249,#14298,#14347,#14374,#14381,+    #14430,#14479,#14528,#14577,#14631,#14680,#14734,#14783,#14832,+    #14881,#14908,#15535,#15584,#15655,#15726,#15797,#15846,#16034,+    #16061,#16088,#16135,#16162,#16209,#16216,#16223,#16230,#16237,+    #16244,#16251,#16300,#16441,#16468,#16495,#16522,#16549,#16576,+    #16583,#16610,#16637,#16664,#16671,#16698,#16725,#16752,#16779,+    #16786,#16813,#16840,#16867,#16894,#16901,#16950,#16999,#17053,+    #17102,#17129,#17211,#17260,#17309,#17336));+#85 = ADVANCED_FACE('',(#86),#100,.T.);+#86 = FACE_BOUND('',#87,.F.);+#87 = EDGE_LOOP('',(#88,#123,#151,#179));+#88 = ORIENTED_EDGE('',*,*,#89,.T.);+#89 = EDGE_CURVE('',#90,#92,#94,.T.);+#90 = VERTEX_POINT('',#91);+#91 = CARTESIAN_POINT('',(3.5,0.,1.9));+#92 = VERTEX_POINT('',#93);+#93 = CARTESIAN_POINT('',(0.,0.,1.9));+#94 = SURFACE_CURVE('',#95,(#99,#111),.PCURVE_S1.);+#95 = LINE('',#96,#97);+#96 = CARTESIAN_POINT('',(3.5,0.,1.9));+#97 = VECTOR('',#98,1.);+#98 = DIRECTION('',(-1.,0.,0.));+#99 = PCURVE('',#100,#105);+#100 = PLANE('',#101);+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);+#102 = CARTESIAN_POINT('',(1.75,2.25,1.9));+#103 = DIRECTION('',(0.,0.,1.));+#104 = DIRECTION('',(1.,0.,-0.));+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(1.75,-2.25));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(-1.,0.));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#111 = PCURVE('',#112,#117);+#112 = PLANE('',#113);+#113 = AXIS2_PLACEMENT_3D('',#114,#115,#116);+#114 = CARTESIAN_POINT('',(0.,0.,0.));+#115 = DIRECTION('',(0.,-1.,0.));+#116 = DIRECTION('',(1.,0.,0.));+#117 = DEFINITIONAL_REPRESENTATION('',(#118),#122);+#118 = LINE('',#119,#120);+#119 = CARTESIAN_POINT('',(3.5,1.9));+#120 = VECTOR('',#121,1.);+#121 = DIRECTION('',(-1.,0.));+#122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#123 = ORIENTED_EDGE('',*,*,#124,.T.);+#124 = EDGE_CURVE('',#92,#125,#127,.T.);+#125 = VERTEX_POINT('',#126);+#126 = CARTESIAN_POINT('',(0.,4.5,1.9));+#127 = SURFACE_CURVE('',#128,(#132,#139),.PCURVE_S1.);+#128 = LINE('',#129,#130);+#129 = CARTESIAN_POINT('',(0.,0.,1.9));+#130 = VECTOR('',#131,1.);+#131 = DIRECTION('',(0.,1.,0.));+#132 = PCURVE('',#100,#133);+#133 = DEFINITIONAL_REPRESENTATION('',(#134),#138);+#134 = LINE('',#135,#136);+#135 = CARTESIAN_POINT('',(-1.75,-2.25));+#136 = VECTOR('',#137,1.);+#137 = DIRECTION('',(0.,1.));+#138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#139 = PCURVE('',#140,#145);+#140 = PLANE('',#141);+#141 = AXIS2_PLACEMENT_3D('',#142,#143,#144);+#142 = CARTESIAN_POINT('',(0.,4.5,0.));+#143 = DIRECTION('',(-1.,0.,0.));+#144 = DIRECTION('',(0.,-1.,0.));+#145 = DEFINITIONAL_REPRESENTATION('',(#146),#150);+#146 = LINE('',#147,#148);+#147 = CARTESIAN_POINT('',(4.5,1.9));+#148 = VECTOR('',#149,1.);+#149 = DIRECTION('',(-1.,0.));+#150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#151 = ORIENTED_EDGE('',*,*,#152,.T.);+#152 = EDGE_CURVE('',#125,#153,#155,.T.);+#153 = VERTEX_POINT('',#154);+#154 = CARTESIAN_POINT('',(3.5,4.5,1.9));+#155 = SURFACE_CURVE('',#156,(#160,#167),.PCURVE_S1.);+#156 = LINE('',#157,#158);+#157 = CARTESIAN_POINT('',(0.,4.5,1.9));+#158 = VECTOR('',#159,1.);+#159 = DIRECTION('',(1.,0.,0.));+#160 = PCURVE('',#100,#161);+#161 = DEFINITIONAL_REPRESENTATION('',(#162),#166);+#162 = LINE('',#163,#164);+#163 = CARTESIAN_POINT('',(-1.75,2.25));+#164 = VECTOR('',#165,1.);+#165 = DIRECTION('',(1.,0.));+#166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#167 = PCURVE('',#168,#173);+#168 = PLANE('',#169);+#169 = AXIS2_PLACEMENT_3D('',#170,#171,#172);+#170 = CARTESIAN_POINT('',(3.5,4.5,0.));+#171 = DIRECTION('',(0.,1.,0.));+#172 = DIRECTION('',(-1.,0.,0.));+#173 = DEFINITIONAL_REPRESENTATION('',(#174),#178);+#174 = LINE('',#175,#176);+#175 = CARTESIAN_POINT('',(3.5,1.9));+#176 = VECTOR('',#177,1.);+#177 = DIRECTION('',(-1.,0.));+#178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#179 = ORIENTED_EDGE('',*,*,#180,.T.);+#180 = EDGE_CURVE('',#153,#90,#181,.T.);+#181 = SURFACE_CURVE('',#182,(#186,#193),.PCURVE_S1.);+#182 = LINE('',#183,#184);+#183 = CARTESIAN_POINT('',(3.5,4.5,1.9));+#184 = VECTOR('',#185,1.);+#185 = DIRECTION('',(0.,-1.,0.));+#186 = PCURVE('',#100,#187);+#187 = DEFINITIONAL_REPRESENTATION('',(#188),#192);+#188 = LINE('',#189,#190);+#189 = CARTESIAN_POINT('',(1.75,2.25));+#190 = VECTOR('',#191,1.);+#191 = DIRECTION('',(0.,-1.));+#192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#193 = PCURVE('',#194,#199);+#194 = PLANE('',#195);+#195 = AXIS2_PLACEMENT_3D('',#196,#197,#198);+#196 = CARTESIAN_POINT('',(3.5,0.,0.));+#197 = DIRECTION('',(1.,0.,0.));+#198 = DIRECTION('',(-0.,1.,0.));+#199 = DEFINITIONAL_REPRESENTATION('',(#200),#204);+#200 = LINE('',#201,#202);+#201 = CARTESIAN_POINT('',(4.5,1.9));+#202 = VECTOR('',#203,1.);+#203 = DIRECTION('',(-1.,0.));+#204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#205 = ADVANCED_FACE('',(#206,#281,#395),#112,.T.);+#206 = FACE_BOUND('',#207,.F.);+#207 = EDGE_LOOP('',(#208,#238,#259,#260));+#208 = ORIENTED_EDGE('',*,*,#209,.T.);+#209 = EDGE_CURVE('',#210,#212,#214,.T.);+#210 = VERTEX_POINT('',#211);+#211 = CARTESIAN_POINT('',(3.5,0.,0.));+#212 = VERTEX_POINT('',#213);+#213 = CARTESIAN_POINT('',(0.,0.,0.));+#214 = SURFACE_CURVE('',#215,(#219,#226),.PCURVE_S1.);+#215 = LINE('',#216,#217);+#216 = CARTESIAN_POINT('',(3.5,0.,0.));+#217 = VECTOR('',#218,1.);+#218 = DIRECTION('',(-1.,0.,0.));+#219 = PCURVE('',#112,#220);+#220 = DEFINITIONAL_REPRESENTATION('',(#221),#225);+#221 = LINE('',#222,#223);+#222 = CARTESIAN_POINT('',(3.5,0.));+#223 = VECTOR('',#224,1.);+#224 = DIRECTION('',(-1.,0.));+#225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#226 = PCURVE('',#227,#232);+#227 = PLANE('',#228);+#228 = AXIS2_PLACEMENT_3D('',#229,#230,#231);+#229 = CARTESIAN_POINT('',(1.75,2.25,0.));+#230 = DIRECTION('',(0.,0.,1.));+#231 = DIRECTION('',(1.,0.,-0.));+#232 = DEFINITIONAL_REPRESENTATION('',(#233),#237);+#233 = LINE('',#234,#235);+#234 = CARTESIAN_POINT('',(1.75,-2.25));+#235 = VECTOR('',#236,1.);+#236 = DIRECTION('',(-1.,0.));+#237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#238 = ORIENTED_EDGE('',*,*,#239,.F.);+#239 = EDGE_CURVE('',#92,#212,#240,.T.);+#240 = SURFACE_CURVE('',#241,(#245,#252),.PCURVE_S1.);+#241 = LINE('',#242,#243);+#242 = CARTESIAN_POINT('',(0.,0.,1.9));+#243 = VECTOR('',#244,1.);+#244 = DIRECTION('',(0.,0.,-1.));+#245 = PCURVE('',#112,#246);+#246 = DEFINITIONAL_REPRESENTATION('',(#247),#251);+#247 = LINE('',#248,#249);+#248 = CARTESIAN_POINT('',(0.,1.9));+#249 = VECTOR('',#250,1.);+#250 = DIRECTION('',(0.,-1.));+#251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#252 = PCURVE('',#140,#253);+#253 = DEFINITIONAL_REPRESENTATION('',(#254),#258);+#254 = LINE('',#255,#256);+#255 = CARTESIAN_POINT('',(4.5,1.9));+#256 = VECTOR('',#257,1.);+#257 = DIRECTION('',(0.,-1.));+#258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#259 = ORIENTED_EDGE('',*,*,#89,.F.);+#260 = ORIENTED_EDGE('',*,*,#261,.T.);+#261 = EDGE_CURVE('',#90,#210,#262,.T.);+#262 = SURFACE_CURVE('',#263,(#267,#274),.PCURVE_S1.);+#263 = LINE('',#264,#265);+#264 = CARTESIAN_POINT('',(3.5,0.,1.9));+#265 = VECTOR('',#266,1.);+#266 = DIRECTION('',(0.,0.,-1.));+#267 = PCURVE('',#112,#268);+#268 = DEFINITIONAL_REPRESENTATION('',(#269),#273);+#269 = LINE('',#270,#271);+#270 = CARTESIAN_POINT('',(3.5,1.9));+#271 = VECTOR('',#272,1.);+#272 = DIRECTION('',(0.,-1.));+#273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#274 = PCURVE('',#194,#275);+#275 = DEFINITIONAL_REPRESENTATION('',(#276),#280);+#276 = LINE('',#277,#278);+#277 = CARTESIAN_POINT('',(0.,1.9));+#278 = VECTOR('',#279,1.);+#279 = DIRECTION('',(0.,-1.));+#280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#281 = FACE_BOUND('',#282,.F.);+#282 = EDGE_LOOP('',(#283,#313,#341,#369));+#283 = ORIENTED_EDGE('',*,*,#284,.T.);+#284 = EDGE_CURVE('',#285,#287,#289,.T.);+#285 = VERTEX_POINT('',#286);+#286 = CARTESIAN_POINT('',(1.059462039418,0.,9.314404469578E-02));+#287 = VERTEX_POINT('',#288);+#288 = CARTESIAN_POINT('',(1.259462039404,0.,9.314404469578E-02));+#289 = SURFACE_CURVE('',#290,(#294,#301),.PCURVE_S1.);+#290 = LINE('',#291,#292);+#291 = CARTESIAN_POINT('',(1.059462039418,0.,9.314404469578E-02));+#292 = VECTOR('',#293,1.);+#293 = DIRECTION('',(1.,0.,0.));+#294 = PCURVE('',#112,#295);+#295 = DEFINITIONAL_REPRESENTATION('',(#296),#300);+#296 = LINE('',#297,#298);+#297 = CARTESIAN_POINT('',(1.059462039418,9.314404469578E-02));+#298 = VECTOR('',#299,1.);+#299 = DIRECTION('',(1.,0.));+#300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#301 = PCURVE('',#302,#307);+#302 = PLANE('',#303);+#303 = AXIS2_PLACEMENT_3D('',#304,#305,#306);+#304 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,+    9.314404469578E-02));+#305 = DIRECTION('',(0.,0.,1.));+#306 = DIRECTION('',(1.,0.,-0.));+#307 = DEFINITIONAL_REPRESENTATION('',(#308),#312);+#308 = LINE('',#309,#310);+#309 = CARTESIAN_POINT('',(0.371698813406,-1.251276520802));+#310 = VECTOR('',#311,1.);+#311 = DIRECTION('',(1.,0.));+#312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#313 = ORIENTED_EDGE('',*,*,#314,.T.);+#314 = EDGE_CURVE('',#287,#315,#317,.T.);+#315 = VERTEX_POINT('',#316);+#316 = CARTESIAN_POINT('',(1.259462039404,0.,0.193144044696));+#317 = SURFACE_CURVE('',#318,(#322,#329),.PCURVE_S1.);+#318 = LINE('',#319,#320);+#319 = CARTESIAN_POINT('',(1.259462039404,0.,9.314404469578E-02));+#320 = VECTOR('',#321,1.);+#321 = DIRECTION('',(0.,0.,1.));+#322 = PCURVE('',#112,#323);+#323 = DEFINITIONAL_REPRESENTATION('',(#324),#328);+#324 = LINE('',#325,#326);+#325 = CARTESIAN_POINT('',(1.259462039404,9.314404469578E-02));+#326 = VECTOR('',#327,1.);+#327 = DIRECTION('',(0.,1.));+#328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#329 = PCURVE('',#330,#335);+#330 = PLANE('',#331);+#331 = AXIS2_PLACEMENT_3D('',#332,#333,#334);+#332 = CARTESIAN_POINT('',(1.259462039404,-1.4307338502E-02,+    9.314404469578E-02));+#333 = DIRECTION('',(1.,0.,0.));+#334 = DIRECTION('',(-0.,1.,0.));+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(0.,1.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#341 = ORIENTED_EDGE('',*,*,#342,.F.);+#342 = EDGE_CURVE('',#343,#315,#345,.T.);+#343 = VERTEX_POINT('',#344);+#344 = CARTESIAN_POINT('',(1.059462039418,0.,0.193144044696));+#345 = SURFACE_CURVE('',#346,(#350,#357),.PCURVE_S1.);+#346 = LINE('',#347,#348);+#347 = CARTESIAN_POINT('',(1.059462039418,0.,0.193144044696));+#348 = VECTOR('',#349,1.);+#349 = DIRECTION('',(1.,0.,0.));+#350 = PCURVE('',#112,#351);+#351 = DEFINITIONAL_REPRESENTATION('',(#352),#356);+#352 = LINE('',#353,#354);+#353 = CARTESIAN_POINT('',(1.059462039418,0.193144044696));+#354 = VECTOR('',#355,1.);+#355 = DIRECTION('',(1.,0.));+#356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#357 = PCURVE('',#358,#363);+#358 = PLANE('',#359);+#359 = AXIS2_PLACEMENT_3D('',#360,#361,#362);+#360 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696)+  );+#361 = DIRECTION('',(0.,0.,1.));+#362 = DIRECTION('',(1.,0.,-0.));+#363 = DEFINITIONAL_REPRESENTATION('',(#364),#368);+#364 = LINE('',#365,#366);+#365 = CARTESIAN_POINT('',(0.371698813406,-1.251276520802));+#366 = VECTOR('',#367,1.);+#367 = DIRECTION('',(1.,0.));+#368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#369 = ORIENTED_EDGE('',*,*,#370,.F.);+#370 = EDGE_CURVE('',#285,#343,#371,.T.);+#371 = SURFACE_CURVE('',#372,(#376,#383),.PCURVE_S1.);+#372 = LINE('',#373,#374);+#373 = CARTESIAN_POINT('',(1.059462039418,0.,9.314404469578E-02));+#374 = VECTOR('',#375,1.);+#375 = DIRECTION('',(0.,0.,1.));+#376 = PCURVE('',#112,#377);+#377 = DEFINITIONAL_REPRESENTATION('',(#378),#382);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(1.059462039418,9.314404469578E-02));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(0.,1.));+#382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#383 = PCURVE('',#384,#389);+#384 = PLANE('',#385);+#385 = AXIS2_PLACEMENT_3D('',#386,#387,#388);+#386 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+    9.314404469578E-02));+#387 = DIRECTION('',(-1.,0.,0.));+#388 = DIRECTION('',(0.,-1.,0.));+#389 = DEFINITIONAL_REPRESENTATION('',(#390),#394);+#390 = LINE('',#391,#392);+#391 = CARTESIAN_POINT('',(1.06926615031E-02,0.));+#392 = VECTOR('',#393,1.);+#393 = DIRECTION('',(0.,1.));+#394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#395 = FACE_BOUND('',#396,.F.);+#396 = EDGE_LOOP('',(#397,#427,#455,#483));+#397 = ORIENTED_EDGE('',*,*,#398,.T.);+#398 = EDGE_CURVE('',#399,#401,#403,.T.);+#399 = VERTEX_POINT('',#400);+#400 = CARTESIAN_POINT('',(2.439462039408,0.,0.193144044696));+#401 = VERTEX_POINT('',#402);+#402 = CARTESIAN_POINT('',(2.239462039422,0.,0.193144044696));+#403 = SURFACE_CURVE('',#404,(#408,#415),.PCURVE_S1.);+#404 = LINE('',#405,#406);+#405 = CARTESIAN_POINT('',(2.439462039408,0.,0.193144044696));+#406 = VECTOR('',#407,1.);+#407 = DIRECTION('',(-1.,0.,0.));+#408 = PCURVE('',#112,#409);+#409 = DEFINITIONAL_REPRESENTATION('',(#410),#414);+#410 = LINE('',#411,#412);+#411 = CARTESIAN_POINT('',(2.439462039408,0.193144044696));+#412 = VECTOR('',#413,1.);+#413 = DIRECTION('',(-1.,0.));+#414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#415 = PCURVE('',#416,#421);+#416 = PLANE('',#417);+#417 = AXIS2_PLACEMENT_3D('',#418,#419,#420);+#418 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696)+  );+#419 = DIRECTION('',(0.,0.,1.));+#420 = DIRECTION('',(1.,0.,-0.));+#421 = DEFINITIONAL_REPRESENTATION('',(#422),#426);+#422 = LINE('',#423,#424);+#423 = CARTESIAN_POINT('',(-0.349634015048,-1.727467110448));+#424 = VECTOR('',#425,1.);+#425 = DIRECTION('',(-1.,0.));+#426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#427 = ORIENTED_EDGE('',*,*,#428,.F.);+#428 = EDGE_CURVE('',#429,#401,#431,.T.);+#429 = VERTEX_POINT('',#430);+#430 = CARTESIAN_POINT('',(2.239462039422,0.,9.314404469578E-02));+#431 = SURFACE_CURVE('',#432,(#436,#443),.PCURVE_S1.);+#432 = LINE('',#433,#434);+#433 = CARTESIAN_POINT('',(2.239462039422,0.,9.314404469578E-02));+#434 = VECTOR('',#435,1.);+#435 = DIRECTION('',(0.,0.,1.));+#436 = PCURVE('',#112,#437);+#437 = DEFINITIONAL_REPRESENTATION('',(#438),#442);+#438 = LINE('',#439,#440);+#439 = CARTESIAN_POINT('',(2.239462039422,9.314404469578E-02));+#440 = VECTOR('',#441,1.);+#441 = DIRECTION('',(0.,1.));+#442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#443 = PCURVE('',#444,#449);+#444 = PLANE('',#445);+#445 = AXIS2_PLACEMENT_3D('',#446,#447,#448);+#446 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+    9.314404469578E-02));+#447 = DIRECTION('',(-1.,0.,0.));+#448 = DIRECTION('',(0.,-1.,0.));+#449 = DEFINITIONAL_REPRESENTATION('',(#450),#454);+#450 = LINE('',#451,#452);+#451 = CARTESIAN_POINT('',(2.032407414415E-03,0.));+#452 = VECTOR('',#453,1.);+#453 = DIRECTION('',(0.,1.));+#454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#455 = ORIENTED_EDGE('',*,*,#456,.T.);+#456 = EDGE_CURVE('',#429,#457,#459,.T.);+#457 = VERTEX_POINT('',#458);+#458 = CARTESIAN_POINT('',(2.439462039408,0.,9.314404469578E-02));+#459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.);+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(2.239462039422,0.,9.314404469578E-02));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.,0.,0.));+#464 = PCURVE('',#112,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(2.239462039422,9.314404469578E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#471 = PCURVE('',#472,#477);+#472 = PLANE('',#473);+#473 = AXIS2_PLACEMENT_3D('',#474,#475,#476);+#474 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,+    9.314404469578E-02));+#475 = DIRECTION('',(0.,0.,1.));+#476 = DIRECTION('',(1.,0.,-0.));+#477 = DEFINITIONAL_REPRESENTATION('',(#478),#482);+#478 = LINE('',#479,#480);+#479 = CARTESIAN_POINT('',(-0.549634015034,-1.727467110448));+#480 = VECTOR('',#481,1.);+#481 = DIRECTION('',(1.,0.));+#482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#483 = ORIENTED_EDGE('',*,*,#484,.T.);+#484 = EDGE_CURVE('',#457,#399,#485,.T.);+#485 = SURFACE_CURVE('',#486,(#490,#497),.PCURVE_S1.);+#486 = LINE('',#487,#488);+#487 = CARTESIAN_POINT('',(2.439462039408,0.,9.314404469578E-02));+#488 = VECTOR('',#489,1.);+#489 = DIRECTION('',(0.,0.,1.));+#490 = PCURVE('',#112,#491);+#491 = DEFINITIONAL_REPRESENTATION('',(#492),#496);+#492 = LINE('',#493,#494);+#493 = CARTESIAN_POINT('',(2.439462039408,9.314404469578E-02));+#494 = VECTOR('',#495,1.);+#495 = DIRECTION('',(0.,1.));+#496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#497 = PCURVE('',#498,#503);+#498 = PLANE('',#499);+#499 = AXIS2_PLACEMENT_3D('',#500,#501,#502);+#500 = CARTESIAN_POINT('',(2.439462039408,-1.4307338502E-02,+    9.314404469578E-02));+#501 = DIRECTION('',(1.,0.,0.));+#502 = DIRECTION('',(-0.,1.,0.));+#503 = DEFINITIONAL_REPRESENTATION('',(#504),#508);+#504 = LINE('',#505,#506);+#505 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#506 = VECTOR('',#507,1.);+#507 = DIRECTION('',(0.,1.));+#508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#509 = ADVANCED_FACE('',(#510),#524,.F.);+#510 = FACE_BOUND('',#511,.F.);+#511 = EDGE_LOOP('',(#512,#547,#570,#598,#626,#654));+#512 = ORIENTED_EDGE('',*,*,#513,.T.);+#513 = EDGE_CURVE('',#514,#516,#518,.T.);+#514 = VERTEX_POINT('',#515);+#515 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,0.));+#516 = VERTEX_POINT('',#517);+#517 = CARTESIAN_POINT('',(0.,1.845441613228,0.));+#518 = SURFACE_CURVE('',#519,(#523,#535),.PCURVE_S1.);+#519 = LINE('',#520,#521);+#520 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,0.));+#521 = VECTOR('',#522,1.);+#522 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#523 = PCURVE('',#524,#529);+#524 = PLANE('',#525);+#525 = AXIS2_PLACEMENT_3D('',#526,#527,#528);+#526 = CARTESIAN_POINT('',(1.75,2.25,0.));+#527 = DIRECTION('',(0.,0.,1.));+#528 = DIRECTION('',(1.,0.,-0.));+#529 = DEFINITIONAL_REPRESENTATION('',(#530),#534);+#530 = LINE('',#531,#532);+#531 = CARTESIAN_POINT('',(-1.675537960579,-0.439307338503));+#532 = VECTOR('',#533,1.);+#533 = DIRECTION('',(-0.90618313999,0.422885465342));+#534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#535 = PCURVE('',#536,#541);+#536 = PLANE('',#537);+#537 = AXIS2_PLACEMENT_3D('',#538,#539,#540);+#538 = CARTESIAN_POINT('',(7.446203941749E-02,1.810692661499,+    9.314404469578E-02));+#539 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#540 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#541 = DEFINITIONAL_REPRESENTATION('',(#542),#546);+#542 = LINE('',#543,#544);+#543 = CARTESIAN_POINT('',(-4.162359949872E-12,9.314404469578E-02));+#544 = VECTOR('',#545,1.);+#545 = DIRECTION('',(1.,0.));+#546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#547 = ORIENTED_EDGE('',*,*,#548,.F.);+#548 = EDGE_CURVE('',#549,#516,#551,.T.);+#549 = VERTEX_POINT('',#550);+#550 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#551 = SURFACE_CURVE('',#552,(#556,#563),.PCURVE_S1.);+#552 = LINE('',#553,#554);+#553 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#554 = VECTOR('',#555,1.);+#555 = DIRECTION('',(0.,1.,0.));+#556 = PCURVE('',#524,#557);+#557 = DEFINITIONAL_REPRESENTATION('',(#558),#562);+#558 = LINE('',#559,#560);+#559 = CARTESIAN_POINT('',(-1.75,-0.724056290231));+#560 = VECTOR('',#561,1.);+#561 = DIRECTION('',(0.,1.));+#562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#563 = PCURVE('',#140,#564);+#564 = DEFINITIONAL_REPRESENTATION('',(#565),#569);+#565 = LINE('',#566,#567);+#566 = CARTESIAN_POINT('',(2.974056290231,0.));+#567 = VECTOR('',#568,1.);+#568 = DIRECTION('',(-1.,0.));+#569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#570 = ORIENTED_EDGE('',*,*,#571,.T.);+#571 = EDGE_CURVE('',#549,#572,#574,.T.);+#572 = VERTEX_POINT('',#573);+#573 = CARTESIAN_POINT('',(7.446203942237E-02,1.560692661501,0.));+#574 = SURFACE_CURVE('',#575,(#579,#586),.PCURVE_S1.);+#575 = LINE('',#576,#577);+#576 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#577 = VECTOR('',#578,1.);+#578 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#579 = PCURVE('',#524,#580);+#580 = DEFINITIONAL_REPRESENTATION('',(#581),#585);+#581 = LINE('',#582,#583);+#582 = CARTESIAN_POINT('',(-1.75,-0.724056290231));+#583 = VECTOR('',#584,1.);+#584 = DIRECTION('',(0.90618313999,0.422885465342));+#585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#586 = PCURVE('',#587,#592);+#587 = PLANE('',#588);+#588 = AXIS2_PLACEMENT_3D('',#589,#590,#591);+#589 = CARTESIAN_POINT('',(-5.379605796046E-04,1.525692661499,+    9.314404469578E-02));+#590 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#591 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#592 = DEFINITIONAL_REPRESENTATION('',(#593),#597);+#593 = LINE('',#594,#595);+#594 = CARTESIAN_POINT('',(5.936554716993E-04,9.314404469578E-02));+#595 = VECTOR('',#596,1.);+#596 = DIRECTION('',(1.,0.));+#597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#598 = ORIENTED_EDGE('',*,*,#599,.F.);+#599 = EDGE_CURVE('',#600,#572,#602,.T.);+#600 = VERTEX_POINT('',#601);+#601 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#602 = SURFACE_CURVE('',#603,(#607,#614),.PCURVE_S1.);+#603 = LINE('',#604,#605);+#604 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#605 = VECTOR('',#606,1.);+#606 = DIRECTION('',(-1.,0.,0.));+#607 = PCURVE('',#524,#608);+#608 = DEFINITIONAL_REPRESENTATION('',(#609),#613);+#609 = LINE('',#610,#611);+#610 = CARTESIAN_POINT('',(-1.550537960575,-0.689307338499));+#611 = VECTOR('',#612,1.);+#612 = DIRECTION('',(-1.,0.));+#613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#614 = PCURVE('',#615,#620);+#615 = PLANE('',#616);+#616 = AXIS2_PLACEMENT_3D('',#617,#618,#619);+#617 = CARTESIAN_POINT('',(0.149462046017,1.560692661501,+    9.314404469578E-02));+#618 = DIRECTION('',(0.,1.,0.));+#619 = DIRECTION('',(-1.,0.,0.));+#620 = DEFINITIONAL_REPRESENTATION('',(#621),#625);+#621 = LINE('',#622,#623);+#622 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#623 = VECTOR('',#624,1.);+#624 = DIRECTION('',(1.,0.));+#625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#626 = ORIENTED_EDGE('',*,*,#627,.T.);+#627 = EDGE_CURVE('',#600,#628,#630,.T.);+#628 = VERTEX_POINT('',#629);+#629 = CARTESIAN_POINT('',(0.199462039425,1.810692661497,0.));+#630 = SURFACE_CURVE('',#631,(#635,#642),.PCURVE_S1.);+#631 = LINE('',#632,#633);+#632 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#633 = VECTOR('',#634,1.);+#634 = DIRECTION('',(0.,1.,0.));+#635 = PCURVE('',#524,#636);+#636 = DEFINITIONAL_REPRESENTATION('',(#637),#641);+#637 = LINE('',#638,#639);+#638 = CARTESIAN_POINT('',(-1.550537960575,-0.689307338499));+#639 = VECTOR('',#640,1.);+#640 = DIRECTION('',(0.,1.));+#641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#642 = PCURVE('',#643,#648);+#643 = PLANE('',#644);+#644 = AXIS2_PLACEMENT_3D('',#645,#646,#647);+#645 = CARTESIAN_POINT('',(0.199462039425,1.560692661498,+    9.314404469578E-02));+#646 = DIRECTION('',(-1.,0.,0.));+#647 = DIRECTION('',(0.,1.,0.));+#648 = DEFINITIONAL_REPRESENTATION('',(#649),#653);+#649 = LINE('',#650,#651);+#650 = CARTESIAN_POINT('',(3.000044657142E-12,9.314404469578E-02));+#651 = VECTOR('',#652,1.);+#652 = DIRECTION('',(1.,0.));+#653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#654 = ORIENTED_EDGE('',*,*,#655,.F.);+#655 = EDGE_CURVE('',#514,#628,#656,.T.);+#656 = SURFACE_CURVE('',#657,(#661,#668),.PCURVE_S1.);+#657 = LINE('',#658,#659);+#658 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,0.));+#659 = VECTOR('',#660,1.);+#660 = DIRECTION('',(1.,0.,0.));+#661 = PCURVE('',#524,#662);+#662 = DEFINITIONAL_REPRESENTATION('',(#663),#667);+#663 = LINE('',#664,#665);+#664 = CARTESIAN_POINT('',(-1.675537960579,-0.439307338503));+#665 = VECTOR('',#666,1.);+#666 = DIRECTION('',(1.,0.));+#667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#668 = PCURVE('',#669,#674);+#669 = PLANE('',#670);+#670 = AXIS2_PLACEMENT_3D('',#671,#672,#673);+#671 = CARTESIAN_POINT('',(7.446204602042E-02,1.810692661497,+    9.314404469578E-02));+#672 = DIRECTION('',(0.,-1.,0.));+#673 = DIRECTION('',(1.,0.,0.));+#674 = DEFINITIONAL_REPRESENTATION('',(#675),#679);+#675 = LINE('',#676,#677);+#676 = CARTESIAN_POINT('',(-6.599270005458E-09,-9.314404469578E-02));+#677 = VECTOR('',#678,1.);+#678 = DIRECTION('',(1.,0.));+#679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#680 = ADVANCED_FACE('',(#681),#695,.F.);+#681 = FACE_BOUND('',#682,.F.);+#682 = EDGE_LOOP('',(#683,#718,#741,#769,#797,#825));+#683 = ORIENTED_EDGE('',*,*,#684,.T.);+#684 = EDGE_CURVE('',#685,#687,#689,.T.);+#685 = VERTEX_POINT('',#686);+#686 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,0.));+#687 = VERTEX_POINT('',#688);+#688 = CARTESIAN_POINT('',(0.,1.345441613228,0.));+#689 = SURFACE_CURVE('',#690,(#694,#706),.PCURVE_S1.);+#690 = LINE('',#691,#692);+#691 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,0.));+#692 = VECTOR('',#693,1.);+#693 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#694 = PCURVE('',#695,#700);+#695 = PLANE('',#696);+#696 = AXIS2_PLACEMENT_3D('',#697,#698,#699);+#697 = CARTESIAN_POINT('',(1.75,2.25,0.));+#698 = DIRECTION('',(0.,0.,1.));+#699 = DIRECTION('',(1.,0.,-0.));+#700 = DEFINITIONAL_REPRESENTATION('',(#701),#705);+#701 = LINE('',#702,#703);+#702 = CARTESIAN_POINT('',(-1.675537960575,-0.939307338505));+#703 = VECTOR('',#704,1.);+#704 = DIRECTION('',(-0.906183139987,0.422885465348));+#705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#706 = PCURVE('',#707,#712);+#707 = PLANE('',#708);+#708 = AXIS2_PLACEMENT_3D('',#709,#710,#711);+#709 = CARTESIAN_POINT('',(7.446203941748E-02,1.310692661499,+    9.314404469578E-02));+#710 = DIRECTION('',(-0.422885465348,-0.906183139987,0.));+#711 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#712 = DEFINITIONAL_REPRESENTATION('',(#713),#717);+#713 = LINE('',#714,#715);+#714 = CARTESIAN_POINT('',(-8.31567872547E-12,9.314404469578E-02));+#715 = VECTOR('',#716,1.);+#716 = DIRECTION('',(1.,0.));+#717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#718 = ORIENTED_EDGE('',*,*,#719,.F.);+#719 = EDGE_CURVE('',#720,#687,#722,.T.);+#720 = VERTEX_POINT('',#721);+#721 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#722 = SURFACE_CURVE('',#723,(#727,#734),.PCURVE_S1.);+#723 = LINE('',#724,#725);+#724 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#725 = VECTOR('',#726,1.);+#726 = DIRECTION('',(0.,1.,0.));+#727 = PCURVE('',#695,#728);+#728 = DEFINITIONAL_REPRESENTATION('',(#729),#733);+#729 = LINE('',#730,#731);+#730 = CARTESIAN_POINT('',(-1.75,-1.224056290231));+#731 = VECTOR('',#732,1.);+#732 = DIRECTION('',(0.,1.));+#733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#734 = PCURVE('',#140,#735);+#735 = DEFINITIONAL_REPRESENTATION('',(#736),#740);+#736 = LINE('',#737,#738);+#737 = CARTESIAN_POINT('',(3.474056290231,0.));+#738 = VECTOR('',#739,1.);+#739 = DIRECTION('',(-1.,0.));+#740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#741 = ORIENTED_EDGE('',*,*,#742,.T.);+#742 = EDGE_CURVE('',#720,#743,#745,.T.);+#743 = VERTEX_POINT('',#744);+#744 = CARTESIAN_POINT('',(7.446203941748E-02,1.060692661499,0.));+#745 = SURFACE_CURVE('',#746,(#750,#757),.PCURVE_S1.);+#746 = LINE('',#747,#748);+#747 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#748 = VECTOR('',#749,1.);+#749 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#750 = PCURVE('',#695,#751);+#751 = DEFINITIONAL_REPRESENTATION('',(#752),#756);+#752 = LINE('',#753,#754);+#753 = CARTESIAN_POINT('',(-1.75,-1.224056290231));+#754 = VECTOR('',#755,1.);+#755 = DIRECTION('',(0.906183139987,0.422885465348));+#756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#757 = PCURVE('',#758,#763);+#758 = PLANE('',#759);+#759 = AXIS2_PLACEMENT_3D('',#760,#761,#762);+#760 = CARTESIAN_POINT('',(-5.379605796054E-04,1.025692661498,+    9.314404469578E-02));+#761 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#762 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#763 = DEFINITIONAL_REPRESENTATION('',(#764),#768);+#764 = LINE('',#765,#766);+#765 = CARTESIAN_POINT('',(5.936554721229E-04,9.314404469578E-02));+#766 = VECTOR('',#767,1.);+#767 = DIRECTION('',(1.,0.));+#768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#769 = ORIENTED_EDGE('',*,*,#770,.F.);+#770 = EDGE_CURVE('',#771,#743,#773,.T.);+#771 = VERTEX_POINT('',#772);+#772 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#773 = SURFACE_CURVE('',#774,(#778,#785),.PCURVE_S1.);+#774 = LINE('',#775,#776);+#775 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#776 = VECTOR('',#777,1.);+#777 = DIRECTION('',(-1.,0.,0.));+#778 = PCURVE('',#695,#779);+#779 = DEFINITIONAL_REPRESENTATION('',(#780),#784);+#780 = LINE('',#781,#782);+#781 = CARTESIAN_POINT('',(-1.550537960575,-1.189307338501));+#782 = VECTOR('',#783,1.);+#783 = DIRECTION('',(-1.,0.));+#784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#785 = PCURVE('',#786,#791);+#786 = PLANE('',#787);+#787 = AXIS2_PLACEMENT_3D('',#788,#789,#790);+#788 = CARTESIAN_POINT('',(0.149462046017,1.060692661499,+    9.314404469578E-02));+#789 = DIRECTION('',(0.,1.,0.));+#790 = DIRECTION('',(-1.,0.,0.));+#791 = DEFINITIONAL_REPRESENTATION('',(#792),#796);+#792 = LINE('',#793,#794);+#793 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#794 = VECTOR('',#795,1.);+#795 = DIRECTION('',(1.,0.));+#796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#797 = ORIENTED_EDGE('',*,*,#798,.T.);+#798 = EDGE_CURVE('',#771,#799,#801,.T.);+#799 = VERTEX_POINT('',#800);+#800 = CARTESIAN_POINT('',(0.199462039425,1.310692661495,0.));+#801 = SURFACE_CURVE('',#802,(#806,#813),.PCURVE_S1.);+#802 = LINE('',#803,#804);+#803 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#804 = VECTOR('',#805,1.);+#805 = DIRECTION('',(0.,1.,0.));+#806 = PCURVE('',#695,#807);+#807 = DEFINITIONAL_REPRESENTATION('',(#808),#812);+#808 = LINE('',#809,#810);+#809 = CARTESIAN_POINT('',(-1.550537960575,-1.189307338501));+#810 = VECTOR('',#811,1.);+#811 = DIRECTION('',(0.,1.));+#812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#813 = PCURVE('',#814,#819);+#814 = PLANE('',#815);+#815 = AXIS2_PLACEMENT_3D('',#816,#817,#818);+#816 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+    9.314404469578E-02));+#817 = DIRECTION('',(-1.,0.,0.));+#818 = DIRECTION('',(0.,1.,0.));+#819 = DEFINITIONAL_REPRESENTATION('',(#820),#824);+#820 = LINE('',#821,#822);+#821 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#822 = VECTOR('',#823,1.);+#823 = DIRECTION('',(1.,0.));+#824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#825 = ORIENTED_EDGE('',*,*,#826,.F.);+#826 = EDGE_CURVE('',#685,#799,#827,.T.);+#827 = SURFACE_CURVE('',#828,(#832,#839),.PCURVE_S1.);+#828 = LINE('',#829,#830);+#829 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,0.));+#830 = VECTOR('',#831,1.);+#831 = DIRECTION('',(1.,0.,0.));+#832 = PCURVE('',#695,#833);+#833 = DEFINITIONAL_REPRESENTATION('',(#834),#838);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(-1.675537960575,-0.939307338505));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(1.,0.));+#838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#839 = PCURVE('',#840,#845);+#840 = PLANE('',#841);+#841 = AXIS2_PLACEMENT_3D('',#842,#843,#844);+#842 = CARTESIAN_POINT('',(7.446204602042E-02,1.310692661495,+    9.314404469578E-02));+#843 = DIRECTION('',(0.,-1.,0.));+#844 = DIRECTION('',(1.,0.,0.));+#845 = DEFINITIONAL_REPRESENTATION('',(#846),#850);+#846 = LINE('',#847,#848);+#847 = CARTESIAN_POINT('',(-6.595630000494E-09,-9.314404469578E-02));+#848 = VECTOR('',#849,1.);+#849 = DIRECTION('',(1.,0.));+#850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#851 = ADVANCED_FACE('',(#852),#866,.F.);+#852 = FACE_BOUND('',#853,.F.);+#853 = EDGE_LOOP('',(#854,#889,#917,#945,#968,#996));+#854 = ORIENTED_EDGE('',*,*,#855,.T.);+#855 = EDGE_CURVE('',#856,#858,#860,.T.);+#856 = VERTEX_POINT('',#857);+#857 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#858 = VERTEX_POINT('',#859);+#859 = CARTESIAN_POINT('',(0.199462039425,0.810692661502,0.));+#860 = SURFACE_CURVE('',#861,(#865,#877),.PCURVE_S1.);+#861 = LINE('',#862,#863);+#862 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#863 = VECTOR('',#864,1.);+#864 = DIRECTION('',(0.,1.,0.));+#865 = PCURVE('',#866,#871);+#866 = PLANE('',#867);+#867 = AXIS2_PLACEMENT_3D('',#868,#869,#870);+#868 = CARTESIAN_POINT('',(1.75,2.25,0.));+#869 = DIRECTION('',(0.,0.,1.));+#870 = DIRECTION('',(1.,0.,-0.));+#871 = DEFINITIONAL_REPRESENTATION('',(#872),#876);+#872 = LINE('',#873,#874);+#873 = CARTESIAN_POINT('',(-1.550537960575,-1.689307338503));+#874 = VECTOR('',#875,1.);+#875 = DIRECTION('',(0.,1.));+#876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#877 = PCURVE('',#878,#883);+#878 = PLANE('',#879);+#879 = AXIS2_PLACEMENT_3D('',#880,#881,#882);+#880 = CARTESIAN_POINT('',(0.199462039425,0.560692661499,+    9.314404469578E-02));+#881 = DIRECTION('',(-1.,0.,0.));+#882 = DIRECTION('',(0.,1.,0.));+#883 = DEFINITIONAL_REPRESENTATION('',(#884),#888);+#884 = LINE('',#885,#886);+#885 = CARTESIAN_POINT('',(-1.99995575656E-12,9.314404469578E-02));+#886 = VECTOR('',#887,1.);+#887 = DIRECTION('',(1.,0.));+#888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#889 = ORIENTED_EDGE('',*,*,#890,.F.);+#890 = EDGE_CURVE('',#891,#858,#893,.T.);+#891 = VERTEX_POINT('',#892);+#892 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,0.));+#893 = SURFACE_CURVE('',#894,(#898,#905),.PCURVE_S1.);+#894 = LINE('',#895,#896);+#895 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,0.));+#896 = VECTOR('',#897,1.);+#897 = DIRECTION('',(1.,0.,0.));+#898 = PCURVE('',#866,#899);+#899 = DEFINITIONAL_REPRESENTATION('',(#900),#904);+#900 = LINE('',#901,#902);+#901 = CARTESIAN_POINT('',(-1.67553795398,-1.439307338498));+#902 = VECTOR('',#903,1.);+#903 = DIRECTION('',(1.,0.));+#904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#905 = PCURVE('',#906,#911);+#906 = PLANE('',#907);+#907 = AXIS2_PLACEMENT_3D('',#908,#909,#910);+#908 = CARTESIAN_POINT('',(7.446204602042E-02,0.810692661502,+    9.314404469578E-02));+#909 = DIRECTION('',(0.,-1.,0.));+#910 = DIRECTION('',(1.,0.,0.));+#911 = DEFINITIONAL_REPRESENTATION('',(#912),#916);+#912 = LINE('',#913,#914);+#913 = CARTESIAN_POINT('',(-1.000588500943E-14,-9.314404469578E-02));+#914 = VECTOR('',#915,1.);+#915 = DIRECTION('',(1.,0.));+#916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#917 = ORIENTED_EDGE('',*,*,#918,.F.);+#918 = EDGE_CURVE('',#919,#891,#921,.T.);+#919 = VERTEX_POINT('',#920);+#920 = CARTESIAN_POINT('',(0.,0.84544161632,0.));+#921 = SURFACE_CURVE('',#922,(#926,#933),.PCURVE_S1.);+#922 = LINE('',#923,#924);+#923 = CARTESIAN_POINT('',(0.,0.84544161632,0.));+#924 = VECTOR('',#925,1.);+#925 = DIRECTION('',(0.906183139959,-0.422885465409,0.));+#926 = PCURVE('',#866,#927);+#927 = DEFINITIONAL_REPRESENTATION('',(#928),#932);+#928 = LINE('',#929,#930);+#929 = CARTESIAN_POINT('',(-1.75,-1.40455838368));+#930 = VECTOR('',#931,1.);+#931 = DIRECTION('',(0.906183139959,-0.422885465409));+#932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#933 = PCURVE('',#934,#939);+#934 = PLANE('',#935);+#935 = AXIS2_PLACEMENT_3D('',#936,#937,#938);+#936 = CARTESIAN_POINT('',(-5.379539584846E-04,0.8456926615,+    9.314404469578E-02));+#937 = DIRECTION('',(-0.422885465409,-0.906183139959,0.));+#938 = DIRECTION('',(0.906183139959,-0.422885465409,0.));+#939 = DEFINITIONAL_REPRESENTATION('',(#940),#944);+#940 = LINE('',#941,#942);+#941 = CARTESIAN_POINT('',(5.936481650359E-04,-9.314404469578E-02));+#942 = VECTOR('',#943,1.);+#943 = DIRECTION('',(1.,0.));+#944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#945 = ORIENTED_EDGE('',*,*,#946,.F.);+#946 = EDGE_CURVE('',#947,#919,#949,.T.);+#947 = VERTEX_POINT('',#948);+#948 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#949 = SURFACE_CURVE('',#950,(#954,#961),.PCURVE_S1.);+#950 = LINE('',#951,#952);+#951 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#952 = VECTOR('',#953,1.);+#953 = DIRECTION('',(0.,1.,0.));+#954 = PCURVE('',#866,#955);+#955 = DEFINITIONAL_REPRESENTATION('',(#956),#960);+#956 = LINE('',#957,#958);+#957 = CARTESIAN_POINT('',(-1.75,-1.724056290231));+#958 = VECTOR('',#959,1.);+#959 = DIRECTION('',(0.,1.));+#960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#961 = PCURVE('',#140,#962);+#962 = DEFINITIONAL_REPRESENTATION('',(#963),#967);+#963 = LINE('',#964,#965);+#964 = CARTESIAN_POINT('',(3.974056290231,0.));+#965 = VECTOR('',#966,1.);+#966 = DIRECTION('',(-1.,0.));+#967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#968 = ORIENTED_EDGE('',*,*,#969,.T.);+#969 = EDGE_CURVE('',#947,#970,#972,.T.);+#970 = VERTEX_POINT('',#971);+#971 = CARTESIAN_POINT('',(7.446203941383E-02,0.560692661497,0.));+#972 = SURFACE_CURVE('',#973,(#977,#984),.PCURVE_S1.);+#973 = LINE('',#974,#975);+#974 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#975 = VECTOR('',#976,1.);+#976 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#977 = PCURVE('',#866,#978);+#978 = DEFINITIONAL_REPRESENTATION('',(#979),#983);+#979 = LINE('',#980,#981);+#980 = CARTESIAN_POINT('',(-1.75,-1.724056290231));+#981 = VECTOR('',#982,1.);+#982 = DIRECTION('',(0.906183139987,0.422885465348));+#983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#984 = PCURVE('',#985,#990);+#985 = PLANE('',#986);+#986 = AXIS2_PLACEMENT_3D('',#987,#988,#989);+#987 = CARTESIAN_POINT('',(-5.379605796061E-04,0.525692661498,+    9.314404469578E-02));+#988 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#989 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#990 = DEFINITIONAL_REPRESENTATION('',(#991),#995);+#991 = LINE('',#992,#993);+#992 = CARTESIAN_POINT('',(5.936554721235E-04,9.314404469578E-02));+#993 = VECTOR('',#994,1.);+#994 = DIRECTION('',(1.,0.));+#995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#996 = ORIENTED_EDGE('',*,*,#997,.F.);+#997 = EDGE_CURVE('',#856,#970,#998,.T.);+#998 = SURFACE_CURVE('',#999,(#1003,#1010),.PCURVE_S1.);+#999 = LINE('',#1000,#1001);+#1000 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#1001 = VECTOR('',#1002,1.);+#1002 = DIRECTION('',(-1.,0.,0.));+#1003 = PCURVE('',#866,#1004);+#1004 = DEFINITIONAL_REPRESENTATION('',(#1005),#1009);+#1005 = LINE('',#1006,#1007);+#1006 = CARTESIAN_POINT('',(-1.550537960575,-1.689307338503));+#1007 = VECTOR('',#1008,1.);+#1008 = DIRECTION('',(-1.,0.));+#1009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1010 = PCURVE('',#1011,#1016);+#1011 = PLANE('',#1012);+#1012 = AXIS2_PLACEMENT_3D('',#1013,#1014,#1015);+#1013 = CARTESIAN_POINT('',(0.149462046017,0.560692661497,+    9.314404469578E-02));+#1014 = DIRECTION('',(0.,1.,0.));+#1015 = DIRECTION('',(-1.,0.,0.));+#1016 = DEFINITIONAL_REPRESENTATION('',(#1017),#1021);+#1017 = LINE('',#1018,#1019);+#1018 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#1019 = VECTOR('',#1020,1.);+#1020 = DIRECTION('',(1.,0.));+#1021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1022 = ADVANCED_FACE('',(#1023),#227,.F.);+#1023 = FACE_BOUND('',#1024,.F.);+#1024 = EDGE_LOOP('',(#1025,#1060,#1088,#1116,#1139,#1167,#1195,#1228,+    #1256,#1284,#1307,#1335,#1363,#1396,#1424,#1457,#1485,#1513,#1541,+    #1569,#1592,#1615,#1643,#1671,#1699,#1732,#1760,#1788,#1816,#1839,+    #1867,#1895,#1923,#1956,#1984,#2012,#2040,#2063,#2091,#2119,#2147,+    #2180,#2208,#2236,#2264,#2287,#2310,#2338,#2366,#2394,#2422,#2450,+    #2478,#2506,#2534,#2557,#2585,#2613,#2646,#2674,#2702,#2725,#2753,+    #2781,#2814,#2842,#2870,#2893,#2921,#2949,#2977,#3005,#3038,#3066,+    #3099,#3127,#3155,#3183,#3211,#3232,#3233,#3256,#3284,#3312,#3340,+    #3368,#3401,#3429,#3462,#3490,#3518,#3546,#3574,#3597,#3625));+#1025 = ORIENTED_EDGE('',*,*,#1026,.T.);+#1026 = EDGE_CURVE('',#1027,#1029,#1031,.T.);+#1027 = VERTEX_POINT('',#1028);+#1028 = CARTESIAN_POINT('',(2.724462045979,2.760692661495,0.));+#1029 = VERTEX_POINT('',#1030);+#1030 = CARTESIAN_POINT('',(2.724462046022,3.010692661495,0.));+#1031 = SURFACE_CURVE('',#1032,(#1037,#1048),.PCURVE_S1.);+#1032 = CIRCLE('',#1033,0.125);+#1033 = AXIS2_PLACEMENT_3D('',#1034,#1035,#1036);+#1034 = CARTESIAN_POINT('',(2.724462046015,2.885692661495,0.));+#1035 = DIRECTION('',(0.,0.,-1.));+#1036 = DIRECTION('',(-2.831512802004E-10,-1.,-0.));+#1037 = PCURVE('',#227,#1038);+#1038 = DEFINITIONAL_REPRESENTATION('',(#1039),#1047);+#1039 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1040,#1041,#1042,#1043,+#1044,#1045,#1046),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1040 = CARTESIAN_POINT('',(0.97446204598,0.510692661495));+#1041 = CARTESIAN_POINT('',(0.757955695033,0.510692661556));+#1042 = CARTESIAN_POINT('',(0.86620887056,0.698192661526));+#1043 = CARTESIAN_POINT('',(0.974462046086,0.885692661495));+#1044 = CARTESIAN_POINT('',(1.082715221506,0.698192661464));+#1045 = CARTESIAN_POINT('',(1.190968396926,0.510692661434));+#1046 = CARTESIAN_POINT('',(0.97446204598,0.510692661495));+#1047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1048 = PCURVE('',#1049,#1054);+#1049 = CYLINDRICAL_SURFACE('',#1050,0.125);+#1050 = AXIS2_PLACEMENT_3D('',#1051,#1052,#1053);+#1051 = CARTESIAN_POINT('',(2.724462046015,2.885692661495,+    9.314404469578E-02));+#1052 = DIRECTION('',(0.,0.,-1.));+#1053 = DIRECTION('',(0.,-1.,0.));+#1054 = DEFINITIONAL_REPRESENTATION('',(#1055),#1059);+#1055 = LINE('',#1056,#1057);+#1056 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1057 = VECTOR('',#1058,1.);+#1058 = DIRECTION('',(1.,0.));+#1059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1060 = ORIENTED_EDGE('',*,*,#1061,.F.);+#1061 = EDGE_CURVE('',#1062,#1029,#1064,.T.);+#1062 = VERTEX_POINT('',#1063);+#1063 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,0.));+#1064 = SURFACE_CURVE('',#1065,(#1069,#1076),.PCURVE_S1.);+#1065 = LINE('',#1066,#1067);+#1066 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,0.));+#1067 = VECTOR('',#1068,1.);+#1068 = DIRECTION('',(-1.,-4.846916564567E-13,0.));+#1069 = PCURVE('',#227,#1070);+#1070 = DEFINITIONAL_REPRESENTATION('',(#1071),#1075);+#1071 = LINE('',#1072,#1073);+#1072 = CARTESIAN_POINT('',(1.674462039427,0.760692661496));+#1073 = VECTOR('',#1074,1.);+#1074 = DIRECTION('',(-1.,-4.846916564567E-13));+#1075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1076 = PCURVE('',#1077,#1082);+#1077 = PLANE('',#1078);+#1078 = AXIS2_PLACEMENT_3D('',#1079,#1080,#1081);+#1079 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+    9.314404469578E-02));+#1080 = DIRECTION('',(0.,1.,0.));+#1081 = DIRECTION('',(-1.,0.,0.));+#1082 = DEFINITIONAL_REPRESENTATION('',(#1083),#1087);+#1083 = LINE('',#1084,#1085);+#1084 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1085 = VECTOR('',#1086,1.);+#1086 = DIRECTION('',(1.,0.));+#1087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1088 = ORIENTED_EDGE('',*,*,#1089,.F.);+#1089 = EDGE_CURVE('',#1090,#1062,#1092,.T.);+#1090 = VERTEX_POINT('',#1091);+#1091 = CARTESIAN_POINT('',(3.5,2.975441613229,0.));+#1092 = SURFACE_CURVE('',#1093,(#1097,#1104),.PCURVE_S1.);+#1093 = LINE('',#1094,#1095);+#1094 = CARTESIAN_POINT('',(3.5,2.975441613229,0.));+#1095 = VECTOR('',#1096,1.);+#1096 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1097 = PCURVE('',#227,#1098);+#1098 = DEFINITIONAL_REPRESENTATION('',(#1099),#1103);+#1099 = LINE('',#1100,#1101);+#1100 = CARTESIAN_POINT('',(1.75,0.725441613229));+#1101 = VECTOR('',#1102,1.);+#1102 = DIRECTION('',(-0.906183139998,0.422885465325));+#1103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1104 = PCURVE('',#1105,#1110);+#1105 = PLANE('',#1106);+#1106 = AXIS2_PLACEMENT_3D('',#1107,#1108,#1109);+#1107 = CARTESIAN_POINT('',(3.499462039424,2.975692661498,+    9.314404469578E-02));+#1108 = DIRECTION('',(0.422885465325,0.906183139998,0.));+#1109 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1110 = DEFINITIONAL_REPRESENTATION('',(#1111),#1115);+#1111 = LINE('',#1112,#1113);+#1112 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#1113 = VECTOR('',#1114,1.);+#1114 = DIRECTION('',(1.,0.));+#1115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1116 = ORIENTED_EDGE('',*,*,#1117,.F.);+#1117 = EDGE_CURVE('',#1118,#1090,#1120,.T.);+#1118 = VERTEX_POINT('',#1119);+#1119 = CARTESIAN_POINT('',(3.5,3.295943709768,0.));+#1120 = SURFACE_CURVE('',#1121,(#1125,#1132),.PCURVE_S1.);+#1121 = LINE('',#1122,#1123);+#1122 = CARTESIAN_POINT('',(3.5,3.295943709768,0.));+#1123 = VECTOR('',#1124,1.);+#1124 = DIRECTION('',(0.,-1.,0.));+#1125 = PCURVE('',#227,#1126);+#1126 = DEFINITIONAL_REPRESENTATION('',(#1127),#1131);+#1127 = LINE('',#1128,#1129);+#1128 = CARTESIAN_POINT('',(1.75,1.045943709768));+#1129 = VECTOR('',#1130,1.);+#1130 = DIRECTION('',(0.,-1.));+#1131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1132 = PCURVE('',#194,#1133);+#1133 = DEFINITIONAL_REPRESENTATION('',(#1134),#1138);+#1134 = LINE('',#1135,#1136);+#1135 = CARTESIAN_POINT('',(3.295943709768,0.));+#1136 = VECTOR('',#1137,1.);+#1137 = DIRECTION('',(-1.,0.));+#1138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1139 = ORIENTED_EDGE('',*,*,#1140,.F.);+#1140 = EDGE_CURVE('',#1141,#1118,#1143,.T.);+#1141 = VERTEX_POINT('',#1142);+#1142 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,0.));+#1143 = SURFACE_CURVE('',#1144,(#1148,#1155),.PCURVE_S1.);+#1144 = LINE('',#1145,#1146);+#1145 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,0.));+#1146 = VECTOR('',#1147,1.);+#1147 = DIRECTION('',(0.906183139956,0.422885465415,0.));+#1148 = PCURVE('',#227,#1149);+#1149 = DEFINITIONAL_REPRESENTATION('',(#1150),#1154);+#1150 = LINE('',#1151,#1152);+#1151 = CARTESIAN_POINT('',(1.674462039427,1.010692661492));+#1152 = VECTOR('',#1153,1.);+#1153 = DIRECTION('',(0.906183139956,0.422885465415));+#1154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1155 = PCURVE('',#1156,#1161);+#1156 = PLANE('',#1157);+#1157 = AXIS2_PLACEMENT_3D('',#1158,#1159,#1160);+#1158 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,+    9.314404469578E-02));+#1159 = DIRECTION('',(0.422885465415,-0.906183139956,0.));+#1160 = DIRECTION('',(0.906183139956,0.422885465415,0.));+#1161 = DEFINITIONAL_REPRESENTATION('',(#1162),#1166);+#1162 = LINE('',#1163,#1164);+#1163 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1164 = VECTOR('',#1165,1.);+#1165 = DIRECTION('',(1.,0.));+#1166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1167 = ORIENTED_EDGE('',*,*,#1168,.F.);+#1168 = EDGE_CURVE('',#1169,#1141,#1171,.T.);+#1169 = VERTEX_POINT('',#1170);+#1170 = CARTESIAN_POINT('',(2.724462046035,3.260692661495,0.));+#1171 = SURFACE_CURVE('',#1172,(#1176,#1183),.PCURVE_S1.);+#1172 = LINE('',#1173,#1174);+#1173 = CARTESIAN_POINT('',(2.724462046022,3.260692661493,0.));+#1174 = VECTOR('',#1175,1.);+#1175 = DIRECTION('',(1.,-1.301815810282E-12,0.));+#1176 = PCURVE('',#227,#1177);+#1177 = DEFINITIONAL_REPRESENTATION('',(#1178),#1182);+#1178 = LINE('',#1179,#1180);+#1179 = CARTESIAN_POINT('',(0.974462046022,1.010692661493));+#1180 = VECTOR('',#1181,1.);+#1181 = DIRECTION('',(1.,-1.301815810282E-12));+#1182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1183 = PCURVE('',#1184,#1189);+#1184 = PLANE('',#1185);+#1185 = AXIS2_PLACEMENT_3D('',#1186,#1187,#1188);+#1186 = CARTESIAN_POINT('',(3.349462039412,3.260692661492,+    9.314404469578E-02));+#1187 = DIRECTION('',(0.,-1.,0.));+#1188 = DIRECTION('',(1.,0.,0.));+#1189 = DEFINITIONAL_REPRESENTATION('',(#1190),#1194);+#1190 = LINE('',#1191,#1192);+#1191 = CARTESIAN_POINT('',(-0.62499999339,-9.314404469578E-02));+#1192 = VECTOR('',#1193,1.);+#1193 = DIRECTION('',(1.,0.));+#1194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1195 = ORIENTED_EDGE('',*,*,#1196,.T.);+#1196 = EDGE_CURVE('',#1169,#1197,#1199,.T.);+#1197 = VERTEX_POINT('',#1198);+#1198 = CARTESIAN_POINT('',(2.724462046035,3.510692661495,0.));+#1199 = SURFACE_CURVE('',#1200,(#1205,#1216),.PCURVE_S1.);+#1200 = CIRCLE('',#1201,0.125);+#1201 = AXIS2_PLACEMENT_3D('',#1202,#1203,#1204);+#1202 = CARTESIAN_POINT('',(2.724462046015,3.385692661495,0.));+#1203 = DIRECTION('',(0.,0.,-1.));+#1204 = DIRECTION('',(1.659081760863E-10,-1.,0.));+#1205 = PCURVE('',#227,#1206);+#1206 = DEFINITIONAL_REPRESENTATION('',(#1207),#1215);+#1207 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1208,#1209,#1210,#1211,+#1212,#1213,#1214),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1208 = CARTESIAN_POINT('',(0.974462046036,1.010692661495));+#1209 = CARTESIAN_POINT('',(0.75795569509,1.010692661459));+#1210 = CARTESIAN_POINT('',(0.866208870532,1.198192661477));+#1211 = CARTESIAN_POINT('',(0.974462045974,1.385692661495));+#1212 = CARTESIAN_POINT('',(1.082715221478,1.198192661513));+#1213 = CARTESIAN_POINT('',(1.190968396982,1.010692661531));+#1214 = CARTESIAN_POINT('',(0.974462046036,1.010692661495));+#1215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1216 = PCURVE('',#1217,#1222);+#1217 = CYLINDRICAL_SURFACE('',#1218,0.125);+#1218 = AXIS2_PLACEMENT_3D('',#1219,#1220,#1221);+#1219 = CARTESIAN_POINT('',(2.724462046015,3.385692661495,+    9.314404469578E-02));+#1220 = DIRECTION('',(0.,0.,-1.));+#1221 = DIRECTION('',(0.,-1.,0.));+#1222 = DEFINITIONAL_REPRESENTATION('',(#1223),#1227);+#1223 = LINE('',#1224,#1225);+#1224 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1225 = VECTOR('',#1226,1.);+#1226 = DIRECTION('',(1.,0.));+#1227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1228 = ORIENTED_EDGE('',*,*,#1229,.F.);+#1229 = EDGE_CURVE('',#1230,#1197,#1232,.T.);+#1230 = VERTEX_POINT('',#1231);+#1231 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,0.));+#1232 = SURFACE_CURVE('',#1233,(#1237,#1244),.PCURVE_S1.);+#1233 = LINE('',#1234,#1235);+#1234 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,0.));+#1235 = VECTOR('',#1236,1.);+#1236 = DIRECTION('',(-1.,-1.298643744467E-12,0.));+#1237 = PCURVE('',#227,#1238);+#1238 = DEFINITIONAL_REPRESENTATION('',(#1239),#1243);+#1239 = LINE('',#1240,#1241);+#1240 = CARTESIAN_POINT('',(1.674462039427,1.260692661498));+#1241 = VECTOR('',#1242,1.);+#1242 = DIRECTION('',(-1.,-1.298643744467E-12));+#1243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1244 = PCURVE('',#1245,#1250);+#1245 = PLANE('',#1246);+#1246 = AXIS2_PLACEMENT_3D('',#1247,#1248,#1249);+#1247 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+    9.314404469578E-02));+#1248 = DIRECTION('',(0.,1.,0.));+#1249 = DIRECTION('',(-1.,0.,0.));+#1250 = DEFINITIONAL_REPRESENTATION('',(#1251),#1255);+#1251 = LINE('',#1252,#1253);+#1252 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1253 = VECTOR('',#1254,1.);+#1254 = DIRECTION('',(1.,0.));+#1255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1256 = ORIENTED_EDGE('',*,*,#1257,.F.);+#1257 = EDGE_CURVE('',#1258,#1230,#1260,.T.);+#1258 = VERTEX_POINT('',#1259);+#1259 = CARTESIAN_POINT('',(3.5,3.475441613231,0.));+#1260 = SURFACE_CURVE('',#1261,(#1265,#1272),.PCURVE_S1.);+#1261 = LINE('',#1262,#1263);+#1262 = CARTESIAN_POINT('',(3.5,3.475441613231,0.));+#1263 = VECTOR('',#1264,1.);+#1264 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1265 = PCURVE('',#227,#1266);+#1266 = DEFINITIONAL_REPRESENTATION('',(#1267),#1271);+#1267 = LINE('',#1268,#1269);+#1268 = CARTESIAN_POINT('',(1.75,1.225441613231));+#1269 = VECTOR('',#1270,1.);+#1270 = DIRECTION('',(-0.906183139998,0.422885465325));+#1271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1272 = PCURVE('',#1273,#1278);+#1273 = PLANE('',#1274);+#1274 = AXIS2_PLACEMENT_3D('',#1275,#1276,#1277);+#1275 = CARTESIAN_POINT('',(3.499462039424,3.4756926615,+    9.314404469578E-02));+#1276 = DIRECTION('',(0.422885465325,0.906183139998,0.));+#1277 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1278 = DEFINITIONAL_REPRESENTATION('',(#1279),#1283);+#1279 = LINE('',#1280,#1281);+#1280 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#1281 = VECTOR('',#1282,1.);+#1282 = DIRECTION('',(1.,0.));+#1283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1284 = ORIENTED_EDGE('',*,*,#1285,.F.);+#1285 = EDGE_CURVE('',#1286,#1258,#1288,.T.);+#1286 = VERTEX_POINT('',#1287);+#1287 = CARTESIAN_POINT('',(3.5,4.045943712856,0.));+#1288 = SURFACE_CURVE('',#1289,(#1293,#1300),.PCURVE_S1.);+#1289 = LINE('',#1290,#1291);+#1290 = CARTESIAN_POINT('',(3.5,4.045943712856,0.));+#1291 = VECTOR('',#1292,1.);+#1292 = DIRECTION('',(0.,-1.,0.));+#1293 = PCURVE('',#227,#1294);+#1294 = DEFINITIONAL_REPRESENTATION('',(#1295),#1299);+#1295 = LINE('',#1296,#1297);+#1296 = CARTESIAN_POINT('',(1.75,1.795943712856));+#1297 = VECTOR('',#1298,1.);+#1298 = DIRECTION('',(0.,-1.));+#1299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1300 = PCURVE('',#194,#1301);+#1301 = DEFINITIONAL_REPRESENTATION('',(#1302),#1306);+#1302 = LINE('',#1303,#1304);+#1303 = CARTESIAN_POINT('',(4.045943712856,0.));+#1304 = VECTOR('',#1305,1.);+#1305 = DIRECTION('',(-1.,0.));+#1306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1307 = ORIENTED_EDGE('',*,*,#1308,.F.);+#1308 = EDGE_CURVE('',#1309,#1286,#1311,.T.);+#1309 = VERTEX_POINT('',#1310);+#1310 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,0.));+#1311 = SURFACE_CURVE('',#1312,(#1316,#1323),.PCURVE_S1.);+#1312 = LINE('',#1313,#1314);+#1313 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,0.));+#1314 = VECTOR('',#1315,1.);+#1315 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#1316 = PCURVE('',#227,#1317);+#1317 = DEFINITIONAL_REPRESENTATION('',(#1318),#1322);+#1318 = LINE('',#1319,#1320);+#1319 = CARTESIAN_POINT('',(1.674462032806,1.760692661499));+#1320 = VECTOR('',#1321,1.);+#1321 = DIRECTION('',(0.906183139998,0.422885465325));+#1322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1323 = PCURVE('',#1324,#1329);+#1324 = PLANE('',#1325);+#1325 = AXIS2_PLACEMENT_3D('',#1326,#1327,#1328);+#1326 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,+    9.314404469578E-02));+#1327 = DIRECTION('',(0.422885465325,-0.906183139998,0.));+#1328 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#1329 = DEFINITIONAL_REPRESENTATION('',(#1330),#1334);+#1330 = LINE('',#1331,#1332);+#1331 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1332 = VECTOR('',#1333,1.);+#1333 = DIRECTION('',(1.,0.));+#1334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1335 = ORIENTED_EDGE('',*,*,#1336,.F.);+#1336 = EDGE_CURVE('',#1337,#1309,#1339,.T.);+#1337 = VERTEX_POINT('',#1338);+#1338 = CARTESIAN_POINT('',(2.674462039381,4.010692661494,0.));+#1339 = SURFACE_CURVE('',#1340,(#1344,#1351),.PCURVE_S1.);+#1340 = LINE('',#1341,#1342);+#1341 = CARTESIAN_POINT('',(2.674462039407,4.010692661498,0.));+#1342 = VECTOR('',#1343,1.);+#1343 = DIRECTION('',(1.,2.259525919604E-12,0.));+#1344 = PCURVE('',#227,#1345);+#1345 = DEFINITIONAL_REPRESENTATION('',(#1346),#1350);+#1346 = LINE('',#1347,#1348);+#1347 = CARTESIAN_POINT('',(0.924462039407,1.760692661498));+#1348 = VECTOR('',#1349,1.);+#1349 = DIRECTION('',(1.,2.259525919604E-12));+#1350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1351 = PCURVE('',#1352,#1357);+#1352 = PLANE('',#1353);+#1353 = AXIS2_PLACEMENT_3D('',#1354,#1355,#1356);+#1354 = CARTESIAN_POINT('',(3.349462032809,4.010692661499,+    9.314404469578E-02));+#1355 = DIRECTION('',(0.,-1.,0.));+#1356 = DIRECTION('',(1.,0.,0.));+#1357 = DEFINITIONAL_REPRESENTATION('',(#1358),#1362);+#1358 = LINE('',#1359,#1360);+#1359 = CARTESIAN_POINT('',(-0.674999993402,-9.314404469578E-02));+#1360 = VECTOR('',#1361,1.);+#1361 = DIRECTION('',(1.,0.));+#1362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1363 = ORIENTED_EDGE('',*,*,#1364,.T.);+#1364 = EDGE_CURVE('',#1337,#1365,#1367,.T.);+#1365 = VERTEX_POINT('',#1366);+#1366 = CARTESIAN_POINT('',(2.574462039417,4.110692661496,0.));+#1367 = SURFACE_CURVE('',#1368,(#1373,#1384),.PCURVE_S1.);+#1368 = CIRCLE('',#1369,0.100000000003);+#1369 = AXIS2_PLACEMENT_3D('',#1370,#1371,#1372);+#1370 = CARTESIAN_POINT('',(2.67446203942,4.110692661497,0.));+#1371 = DIRECTION('',(0.,0.,-1.));+#1372 = DIRECTION('',(-3.862288266876E-10,-1.,-0.));+#1373 = PCURVE('',#227,#1374);+#1374 = DEFINITIONAL_REPRESENTATION('',(#1375),#1383);+#1375 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1376,#1377,#1378,#1379,+#1380,#1381,#1382),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1376 = CARTESIAN_POINT('',(0.924462039381,1.760692661494));+#1377 = CARTESIAN_POINT('',(0.751256958619,1.760692661561));+#1378 = CARTESIAN_POINT('',(0.837859499058,1.910692661532));+#1379 = CARTESIAN_POINT('',(0.924462039497,2.060692661503));+#1380 = CARTESIAN_POINT('',(1.01106457982,1.910692661465));+#1381 = CARTESIAN_POINT('',(1.097667120143,1.760692661427));+#1382 = CARTESIAN_POINT('',(0.924462039381,1.760692661494));+#1383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1384 = PCURVE('',#1385,#1390);+#1385 = CYLINDRICAL_SURFACE('',#1386,0.100000000003);+#1386 = AXIS2_PLACEMENT_3D('',#1387,#1388,#1389);+#1387 = CARTESIAN_POINT('',(2.67446203942,4.110692661497,+    9.314404469578E-02));+#1388 = DIRECTION('',(0.,0.,-1.));+#1389 = DIRECTION('',(0.,-1.,0.));+#1390 = DEFINITIONAL_REPRESENTATION('',(#1391),#1395);+#1391 = LINE('',#1392,#1393);+#1392 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1393 = VECTOR('',#1394,1.);+#1394 = DIRECTION('',(1.,0.));+#1395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1396 = ORIENTED_EDGE('',*,*,#1397,.F.);+#1397 = EDGE_CURVE('',#1398,#1365,#1400,.T.);+#1398 = VERTEX_POINT('',#1399);+#1399 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,0.));+#1400 = SURFACE_CURVE('',#1401,(#1405,#1412),.PCURVE_S1.);+#1401 = LINE('',#1402,#1403);+#1402 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,0.));+#1403 = VECTOR('',#1404,1.);+#1404 = DIRECTION('',(-1.301815798029E-12,-1.,0.));+#1405 = PCURVE('',#227,#1406);+#1406 = DEFINITIONAL_REPRESENTATION('',(#1407),#1411);+#1407 = LINE('',#1408,#1409);+#1408 = CARTESIAN_POINT('',(0.824462039417,2.035692661494));+#1409 = VECTOR('',#1410,1.);+#1410 = DIRECTION('',(-1.301815798029E-12,-1.));+#1411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1412 = PCURVE('',#1413,#1418);+#1413 = PLANE('',#1414);+#1414 = AXIS2_PLACEMENT_3D('',#1415,#1416,#1417);+#1415 = CARTESIAN_POINT('',(2.574462039417,4.485692661496,+    9.314404469578E-02));+#1416 = DIRECTION('',(-1.,0.,0.));+#1417 = DIRECTION('',(0.,-1.,0.));+#1418 = DEFINITIONAL_REPRESENTATION('',(#1419),#1423);+#1419 = LINE('',#1420,#1421);+#1420 = CARTESIAN_POINT('',(0.200000000002,-9.314404469578E-02));+#1421 = VECTOR('',#1422,1.);+#1422 = DIRECTION('',(1.,0.));+#1423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1424 = ORIENTED_EDGE('',*,*,#1425,.T.);+#1425 = EDGE_CURVE('',#1398,#1426,#1428,.T.);+#1426 = VERTEX_POINT('',#1427);+#1427 = CARTESIAN_POINT('',(2.674462039417,4.385692661494,0.));+#1428 = SURFACE_CURVE('',#1429,(#1434,#1445),.PCURVE_S1.);+#1429 = CIRCLE('',#1430,0.1);+#1430 = AXIS2_PLACEMENT_3D('',#1431,#1432,#1433);+#1431 = CARTESIAN_POINT('',(2.674462039417,4.285692661494,0.));+#1432 = DIRECTION('',(0.,0.,-1.));+#1433 = DIRECTION('',(-1.,-1.7763568394E-14,-0.));+#1434 = PCURVE('',#227,#1435);+#1435 = DEFINITIONAL_REPRESENTATION('',(#1436),#1444);+#1436 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1437,#1438,#1439,#1440,+#1441,#1442,#1443),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1437 = CARTESIAN_POINT('',(0.824462039417,2.035692661494));+#1438 = CARTESIAN_POINT('',(0.824462039417,2.208897742251));+#1439 = CARTESIAN_POINT('',(0.974462039417,2.122295201872));+#1440 = CARTESIAN_POINT('',(1.124462039417,2.035692661494));+#1441 = CARTESIAN_POINT('',(0.974462039417,1.949090121116));+#1442 = CARTESIAN_POINT('',(0.824462039417,1.862487580737));+#1443 = CARTESIAN_POINT('',(0.824462039417,2.035692661494));+#1444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1445 = PCURVE('',#1446,#1451);+#1446 = CYLINDRICAL_SURFACE('',#1447,0.1);+#1447 = AXIS2_PLACEMENT_3D('',#1448,#1449,#1450);+#1448 = CARTESIAN_POINT('',(2.674462039417,4.285692661494,+    9.314404469578E-02));+#1449 = DIRECTION('',(0.,0.,-1.));+#1450 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1451 = DEFINITIONAL_REPRESENTATION('',(#1452),#1456);+#1452 = LINE('',#1453,#1454);+#1453 = CARTESIAN_POINT('',(5.497787143782,9.314404469578E-02));+#1454 = VECTOR('',#1455,1.);+#1455 = DIRECTION('',(1.,0.));+#1456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1457 = ORIENTED_EDGE('',*,*,#1458,.F.);+#1458 = EDGE_CURVE('',#1459,#1426,#1461,.T.);+#1459 = VERTEX_POINT('',#1460);+#1460 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#1461 = SURFACE_CURVE('',#1462,(#1466,#1473),.PCURVE_S1.);+#1462 = LINE('',#1463,#1464);+#1463 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#1464 = VECTOR('',#1465,1.);+#1465 = DIRECTION('',(-1.,0.,0.));+#1466 = PCURVE('',#227,#1467);+#1467 = DEFINITIONAL_REPRESENTATION('',(#1468),#1472);+#1468 = LINE('',#1469,#1470);+#1469 = CARTESIAN_POINT('',(1.54946203942,2.135692661494));+#1470 = VECTOR('',#1471,1.);+#1471 = DIRECTION('',(-1.,0.));+#1472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1473 = PCURVE('',#1474,#1479);+#1474 = PLANE('',#1475);+#1475 = AXIS2_PLACEMENT_3D('',#1476,#1477,#1478);+#1476 = CARTESIAN_POINT('',(3.349462032809,4.385692661494,+    9.314404469578E-02));+#1477 = DIRECTION('',(0.,1.,0.));+#1478 = DIRECTION('',(-1.,0.,0.));+#1479 = DEFINITIONAL_REPRESENTATION('',(#1480),#1484);+#1480 = LINE('',#1481,#1482);+#1481 = CARTESIAN_POINT('',(4.9999993389E-02,-9.314404469578E-02));+#1482 = VECTOR('',#1483,1.);+#1483 = DIRECTION('',(1.,0.));+#1484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1485 = ORIENTED_EDGE('',*,*,#1486,.T.);+#1486 = EDGE_CURVE('',#1459,#1487,#1489,.T.);+#1487 = VERTEX_POINT('',#1488);+#1488 = CARTESIAN_POINT('',(3.29946203942,4.260692661496,0.));+#1489 = SURFACE_CURVE('',#1490,(#1494,#1501),.PCURVE_S1.);+#1490 = LINE('',#1491,#1492);+#1491 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#1492 = VECTOR('',#1493,1.);+#1493 = DIRECTION('',(0.,-1.,0.));+#1494 = PCURVE('',#227,#1495);+#1495 = DEFINITIONAL_REPRESENTATION('',(#1496),#1500);+#1496 = LINE('',#1497,#1498);+#1497 = CARTESIAN_POINT('',(1.54946203942,2.135692661494));+#1498 = VECTOR('',#1499,1.);+#1499 = DIRECTION('',(0.,-1.));+#1500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1501 = PCURVE('',#1502,#1507);+#1502 = PLANE('',#1503);+#1503 = AXIS2_PLACEMENT_3D('',#1504,#1505,#1506);+#1504 = CARTESIAN_POINT('',(3.29946203942,4.385692661495,+    9.314404469578E-02));+#1505 = DIRECTION('',(1.,0.,0.));+#1506 = DIRECTION('',(0.,-1.,0.));+#1507 = DEFINITIONAL_REPRESENTATION('',(#1508),#1512);+#1508 = LINE('',#1509,#1510);+#1509 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#1510 = VECTOR('',#1511,1.);+#1511 = DIRECTION('',(1.,0.));+#1512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1513 = ORIENTED_EDGE('',*,*,#1514,.F.);+#1514 = EDGE_CURVE('',#1515,#1487,#1517,.T.);+#1515 = VERTEX_POINT('',#1516);+#1516 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,0.));+#1517 = SURFACE_CURVE('',#1518,(#1522,#1529),.PCURVE_S1.);+#1518 = LINE('',#1519,#1520);+#1519 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,0.));+#1520 = VECTOR('',#1521,1.);+#1521 = DIRECTION('',(-1.,0.,0.));+#1522 = PCURVE('',#227,#1523);+#1523 = DEFINITIONAL_REPRESENTATION('',(#1524),#1528);+#1524 = LINE('',#1525,#1526);+#1525 = CARTESIAN_POINT('',(1.674462039425,2.010692661496));+#1526 = VECTOR('',#1527,1.);+#1527 = DIRECTION('',(-1.,0.));+#1528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1529 = PCURVE('',#1530,#1535);+#1530 = PLANE('',#1531);+#1531 = AXIS2_PLACEMENT_3D('',#1532,#1533,#1534);+#1532 = CARTESIAN_POINT('',(3.424462032806,4.260692661496,+    9.314404469578E-02));+#1533 = DIRECTION('',(0.,1.,0.));+#1534 = DIRECTION('',(-1.,0.,0.));+#1535 = DEFINITIONAL_REPRESENTATION('',(#1536),#1540);+#1536 = LINE('',#1537,#1538);+#1537 = CARTESIAN_POINT('',(-6.619000014751E-09,-9.314404469578E-02));+#1538 = VECTOR('',#1539,1.);+#1539 = DIRECTION('',(1.,0.));+#1540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1541 = ORIENTED_EDGE('',*,*,#1542,.T.);+#1542 = EDGE_CURVE('',#1515,#1543,#1545,.T.);+#1543 = VERTEX_POINT('',#1544);+#1544 = CARTESIAN_POINT('',(3.5,4.225441613226,0.));+#1545 = SURFACE_CURVE('',#1546,(#1550,#1557),.PCURVE_S1.);+#1546 = LINE('',#1547,#1548);+#1547 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,0.));+#1548 = VECTOR('',#1549,1.);+#1549 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#1550 = PCURVE('',#227,#1551);+#1551 = DEFINITIONAL_REPRESENTATION('',(#1552),#1556);+#1552 = LINE('',#1553,#1554);+#1553 = CARTESIAN_POINT('',(1.674462039425,2.010692661496));+#1554 = VECTOR('',#1555,1.);+#1555 = DIRECTION('',(0.906183139987,-0.422885465348));+#1556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1557 = PCURVE('',#1558,#1563);+#1558 = PLANE('',#1559);+#1559 = AXIS2_PLACEMENT_3D('',#1560,#1561,#1562);+#1560 = CARTESIAN_POINT('',(3.424462039427,4.260692661495,+    9.314404469578E-02));+#1561 = DIRECTION('',(0.422885465348,0.906183139987,0.));+#1562 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#1563 = DEFINITIONAL_REPRESENTATION('',(#1564),#1568);+#1564 = LINE('',#1565,#1566);+#1565 = CARTESIAN_POINT('',(-2.235504117324E-12,9.314404469578E-02));+#1566 = VECTOR('',#1567,1.);+#1567 = DIRECTION('',(1.,0.));+#1568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1569 = ORIENTED_EDGE('',*,*,#1570,.F.);+#1570 = EDGE_CURVE('',#1571,#1543,#1573,.T.);+#1571 = VERTEX_POINT('',#1572);+#1572 = CARTESIAN_POINT('',(3.5,4.5,0.));+#1573 = SURFACE_CURVE('',#1574,(#1578,#1585),.PCURVE_S1.);+#1574 = LINE('',#1575,#1576);+#1575 = CARTESIAN_POINT('',(3.5,4.5,0.));+#1576 = VECTOR('',#1577,1.);+#1577 = DIRECTION('',(0.,-1.,0.));+#1578 = PCURVE('',#227,#1579);+#1579 = DEFINITIONAL_REPRESENTATION('',(#1580),#1584);+#1580 = LINE('',#1581,#1582);+#1581 = CARTESIAN_POINT('',(1.75,2.25));+#1582 = VECTOR('',#1583,1.);+#1583 = DIRECTION('',(0.,-1.));+#1584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1585 = PCURVE('',#194,#1586);+#1586 = DEFINITIONAL_REPRESENTATION('',(#1587),#1591);+#1587 = LINE('',#1588,#1589);+#1588 = CARTESIAN_POINT('',(4.5,0.));+#1589 = VECTOR('',#1590,1.);+#1590 = DIRECTION('',(-1.,0.));+#1591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1592 = ORIENTED_EDGE('',*,*,#1593,.F.);+#1593 = EDGE_CURVE('',#1594,#1571,#1596,.T.);+#1594 = VERTEX_POINT('',#1595);+#1595 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#1596 = SURFACE_CURVE('',#1597,(#1601,#1608),.PCURVE_S1.);+#1597 = LINE('',#1598,#1599);+#1598 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#1599 = VECTOR('',#1600,1.);+#1600 = DIRECTION('',(1.,0.,0.));+#1601 = PCURVE('',#227,#1602);+#1602 = DEFINITIONAL_REPRESENTATION('',(#1603),#1607);+#1603 = LINE('',#1604,#1605);+#1604 = CARTESIAN_POINT('',(0.589462039424,2.25));+#1605 = VECTOR('',#1606,1.);+#1606 = DIRECTION('',(1.,0.));+#1607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1608 = PCURVE('',#168,#1609);+#1609 = DEFINITIONAL_REPRESENTATION('',(#1610),#1614);+#1610 = LINE('',#1611,#1612);+#1611 = CARTESIAN_POINT('',(1.160537960576,0.));+#1612 = VECTOR('',#1613,1.);+#1613 = DIRECTION('',(-1.,0.));+#1614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1615 = ORIENTED_EDGE('',*,*,#1616,.T.);+#1616 = EDGE_CURVE('',#1594,#1617,#1619,.T.);+#1617 = VERTEX_POINT('',#1618);+#1618 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,0.));+#1619 = SURFACE_CURVE('',#1620,(#1624,#1631),.PCURVE_S1.);+#1620 = LINE('',#1621,#1622);+#1621 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#1622 = VECTOR('',#1623,1.);+#1623 = DIRECTION('',(0.,-1.,0.));+#1624 = PCURVE('',#227,#1625);+#1625 = DEFINITIONAL_REPRESENTATION('',(#1626),#1630);+#1626 = LINE('',#1627,#1628);+#1627 = CARTESIAN_POINT('',(0.589462039424,2.25));+#1628 = VECTOR('',#1629,1.);+#1629 = DIRECTION('',(0.,-1.));+#1630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1631 = PCURVE('',#1632,#1637);+#1632 = PLANE('',#1633);+#1633 = AXIS2_PLACEMENT_3D('',#1634,#1635,#1636);+#1634 = CARTESIAN_POINT('',(2.339462039424,4.485692661496,+    9.314404469578E-02));+#1635 = DIRECTION('',(1.,0.,0.));+#1636 = DIRECTION('',(0.,0.,-1.));+#1637 = DEFINITIONAL_REPRESENTATION('',(#1638),#1642);+#1638 = LINE('',#1639,#1640);+#1639 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#1640 = VECTOR('',#1641,1.);+#1641 = DIRECTION('',(0.,-1.));+#1642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1643 = ORIENTED_EDGE('',*,*,#1644,.T.);+#1644 = EDGE_CURVE('',#1617,#1645,#1647,.T.);+#1645 = VERTEX_POINT('',#1646);+#1646 = CARTESIAN_POINT('',(2.374462039413,4.410692661497,0.));+#1647 = SURFACE_CURVE('',#1648,(#1652,#1659),.PCURVE_S1.);+#1648 = LINE('',#1649,#1650);+#1649 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,0.));+#1650 = VECTOR('',#1651,1.);+#1651 = DIRECTION('',(0.422885465219,-0.906183140048,0.));+#1652 = PCURVE('',#227,#1653);+#1653 = DEFINITIONAL_REPRESENTATION('',(#1654),#1658);+#1654 = LINE('',#1655,#1656);+#1655 = CARTESIAN_POINT('',(0.589462039424,2.235692661497));+#1656 = VECTOR('',#1657,1.);+#1657 = DIRECTION('',(0.422885465219,-0.906183140048));+#1658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1659 = PCURVE('',#1660,#1665);+#1660 = PLANE('',#1661);+#1661 = AXIS2_PLACEMENT_3D('',#1662,#1663,#1664);+#1662 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+    9.314404469578E-02));+#1663 = DIRECTION('',(0.906183140048,0.422885465219,0.));+#1664 = DIRECTION('',(0.422885465219,-0.906183140048,0.));+#1665 = DEFINITIONAL_REPRESENTATION('',(#1666),#1670);+#1666 = LINE('',#1667,#1668);+#1667 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1668 = VECTOR('',#1669,1.);+#1669 = DIRECTION('',(1.,0.));+#1670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1671 = ORIENTED_EDGE('',*,*,#1672,.F.);+#1672 = EDGE_CURVE('',#1673,#1645,#1675,.T.);+#1673 = VERTEX_POINT('',#1674);+#1674 = CARTESIAN_POINT('',(2.374462039406,4.010692661549,0.));+#1675 = SURFACE_CURVE('',#1676,(#1680,#1687),.PCURVE_S1.);+#1676 = LINE('',#1677,#1678);+#1677 = CARTESIAN_POINT('',(2.374462039411,4.010692661512,0.));+#1678 = VECTOR('',#1679,1.);+#1679 = DIRECTION('',(6.058487045616E-12,1.,0.));+#1680 = PCURVE('',#227,#1681);+#1681 = DEFINITIONAL_REPRESENTATION('',(#1682),#1686);+#1682 = LINE('',#1683,#1684);+#1683 = CARTESIAN_POINT('',(0.624462039411,1.760692661512));+#1684 = VECTOR('',#1685,1.);+#1685 = DIRECTION('',(6.058487045616E-12,1.));+#1686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1687 = PCURVE('',#1688,#1693);+#1688 = PLANE('',#1689);+#1689 = AXIS2_PLACEMENT_3D('',#1690,#1691,#1692);+#1690 = CARTESIAN_POINT('',(2.374462039413,4.335692661502,+    9.314404469578E-02));+#1691 = DIRECTION('',(1.,0.,0.));+#1692 = DIRECTION('',(-0.,1.,0.));+#1693 = DEFINITIONAL_REPRESENTATION('',(#1694),#1698);+#1694 = LINE('',#1695,#1696);+#1695 = CARTESIAN_POINT('',(-0.32499999999,-9.314404469578E-02));+#1696 = VECTOR('',#1697,1.);+#1697 = DIRECTION('',(1.,0.));+#1698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1699 = ORIENTED_EDGE('',*,*,#1700,.T.);+#1700 = EDGE_CURVE('',#1673,#1701,#1703,.T.);+#1701 = VERTEX_POINT('',#1702);+#1702 = CARTESIAN_POINT('',(2.124462039406,4.010692661411,0.));+#1703 = SURFACE_CURVE('',#1704,(#1709,#1720),.PCURVE_S1.);+#1704 = CIRCLE('',#1705,0.125);+#1705 = AXIS2_PLACEMENT_3D('',#1706,#1707,#1708);+#1706 = CARTESIAN_POINT('',(2.249462039406,4.010692661494,0.));+#1707 = DIRECTION('',(0.,0.,-1.));+#1708 = DIRECTION('',(1.,4.417870513862E-10,0.));+#1709 = PCURVE('',#227,#1710);+#1710 = DEFINITIONAL_REPRESENTATION('',(#1711),#1719);+#1711 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1712,#1713,#1714,#1715,+#1716,#1717,#1718),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1712 = CARTESIAN_POINT('',(0.624462039406,1.760692661549));+#1713 = CARTESIAN_POINT('',(0.624462039502,1.544186310603));+#1714 = CARTESIAN_POINT('',(0.436962039454,1.652439485993));+#1715 = CARTESIAN_POINT('',(0.249462039406,1.760692661384));+#1716 = CARTESIAN_POINT('',(0.436962039358,1.868945836939));+#1717 = CARTESIAN_POINT('',(0.62446203931,1.977199012495));+#1718 = CARTESIAN_POINT('',(0.624462039406,1.760692661549));+#1719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1720 = PCURVE('',#1721,#1726);+#1721 = CYLINDRICAL_SURFACE('',#1722,0.125);+#1722 = AXIS2_PLACEMENT_3D('',#1723,#1724,#1725);+#1723 = CARTESIAN_POINT('',(2.249462039406,4.010692661494,+    9.314404469578E-02));+#1724 = DIRECTION('',(0.,0.,-1.));+#1725 = DIRECTION('',(-1.,2.275162696997E-12,0.));+#1726 = DEFINITIONAL_REPRESENTATION('',(#1727),#1731);+#1727 = LINE('',#1728,#1729);+#1728 = CARTESIAN_POINT('',(3.141592653146,9.314404469578E-02));+#1729 = VECTOR('',#1730,1.);+#1730 = DIRECTION('',(1.,0.));+#1731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1732 = ORIENTED_EDGE('',*,*,#1733,.F.);+#1733 = EDGE_CURVE('',#1734,#1701,#1736,.T.);+#1734 = VERTEX_POINT('',#1735);+#1735 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,0.));+#1736 = SURFACE_CURVE('',#1737,(#1741,#1748),.PCURVE_S1.);+#1737 = LINE('',#1738,#1739);+#1738 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,0.));+#1739 = VECTOR('',#1740,1.);+#1740 = DIRECTION('',(-9.092726570938E-12,-1.,0.));+#1741 = PCURVE('',#227,#1742);+#1742 = DEFINITIONAL_REPRESENTATION('',(#1743),#1747);+#1743 = LINE('',#1744,#1745);+#1744 = CARTESIAN_POINT('',(0.374462039417,2.160692661499));+#1745 = VECTOR('',#1746,1.);+#1746 = DIRECTION('',(-9.092726570938E-12,-1.));+#1747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1748 = PCURVE('',#1749,#1754);+#1749 = PLANE('',#1750);+#1750 = AXIS2_PLACEMENT_3D('',#1751,#1752,#1753);+#1751 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+    9.314404469578E-02));+#1752 = DIRECTION('',(-1.,0.,0.));+#1753 = DIRECTION('',(0.,-1.,0.));+#1754 = DEFINITIONAL_REPRESENTATION('',(#1755),#1759);+#1755 = LINE('',#1756,#1757);+#1756 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1757 = VECTOR('',#1758,1.);+#1758 = DIRECTION('',(1.,0.));+#1759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1760 = ORIENTED_EDGE('',*,*,#1761,.F.);+#1761 = EDGE_CURVE('',#1762,#1734,#1764,.T.);+#1762 = VERTEX_POINT('',#1763);+#1763 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,0.));+#1764 = SURFACE_CURVE('',#1765,(#1769,#1776),.PCURVE_S1.);+#1765 = LINE('',#1766,#1767);+#1766 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,0.));+#1767 = VECTOR('',#1768,1.);+#1768 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#1769 = PCURVE('',#227,#1770);+#1770 = DEFINITIONAL_REPRESENTATION('',(#1771),#1775);+#1771 = LINE('',#1772,#1773);+#1772 = CARTESIAN_POINT('',(0.409462039424,2.235692661496));+#1773 = VECTOR('',#1774,1.);+#1774 = DIRECTION('',(-0.422885465415,-0.906183139956));+#1775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1776 = PCURVE('',#1777,#1782);+#1777 = PLANE('',#1778);+#1778 = AXIS2_PLACEMENT_3D('',#1779,#1780,#1781);+#1779 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+    9.314404469578E-02));+#1780 = DIRECTION('',(-0.906183139956,0.422885465415,0.));+#1781 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#1782 = DEFINITIONAL_REPRESENTATION('',(#1783),#1787);+#1783 = LINE('',#1784,#1785);+#1784 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#1785 = VECTOR('',#1786,1.);+#1786 = DIRECTION('',(1.,0.));+#1787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1788 = ORIENTED_EDGE('',*,*,#1789,.F.);+#1789 = EDGE_CURVE('',#1790,#1762,#1792,.T.);+#1790 = VERTEX_POINT('',#1791);+#1791 = CARTESIAN_POINT('',(2.159462039424,4.5,0.));+#1792 = SURFACE_CURVE('',#1793,(#1797,#1804),.PCURVE_S1.);+#1793 = LINE('',#1794,#1795);+#1794 = CARTESIAN_POINT('',(2.159462039424,4.5,0.));+#1795 = VECTOR('',#1796,1.);+#1796 = DIRECTION('',(0.,-1.,0.));+#1797 = PCURVE('',#227,#1798);+#1798 = DEFINITIONAL_REPRESENTATION('',(#1799),#1803);+#1799 = LINE('',#1800,#1801);+#1800 = CARTESIAN_POINT('',(0.409462039424,2.25));+#1801 = VECTOR('',#1802,1.);+#1802 = DIRECTION('',(0.,-1.));+#1803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1804 = PCURVE('',#1805,#1810);+#1805 = PLANE('',#1806);+#1806 = AXIS2_PLACEMENT_3D('',#1807,#1808,#1809);+#1807 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+    -6.855955304215E-03));+#1808 = DIRECTION('',(-1.,0.,0.));+#1809 = DIRECTION('',(0.,0.,1.));+#1810 = DEFINITIONAL_REPRESENTATION('',(#1811),#1815);+#1811 = LINE('',#1812,#1813);+#1812 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#1813 = VECTOR('',#1814,1.);+#1814 = DIRECTION('',(0.,-1.));+#1815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1816 = ORIENTED_EDGE('',*,*,#1817,.F.);+#1817 = EDGE_CURVE('',#1818,#1790,#1820,.T.);+#1818 = VERTEX_POINT('',#1819);+#1819 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#1820 = SURFACE_CURVE('',#1821,(#1825,#1832),.PCURVE_S1.);+#1821 = LINE('',#1822,#1823);+#1822 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#1823 = VECTOR('',#1824,1.);+#1824 = DIRECTION('',(1.,0.,0.));+#1825 = PCURVE('',#227,#1826);+#1826 = DEFINITIONAL_REPRESENTATION('',(#1827),#1831);+#1827 = LINE('',#1828,#1829);+#1828 = CARTESIAN_POINT('',(8.9462039413E-02,2.25));+#1829 = VECTOR('',#1830,1.);+#1830 = DIRECTION('',(1.,0.));+#1831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1832 = PCURVE('',#168,#1833);+#1833 = DEFINITIONAL_REPRESENTATION('',(#1834),#1838);+#1834 = LINE('',#1835,#1836);+#1835 = CARTESIAN_POINT('',(1.660537960587,0.));+#1836 = VECTOR('',#1837,1.);+#1837 = DIRECTION('',(-1.,0.));+#1838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1839 = ORIENTED_EDGE('',*,*,#1840,.T.);+#1840 = EDGE_CURVE('',#1818,#1841,#1843,.T.);+#1841 = VERTEX_POINT('',#1842);+#1842 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,0.));+#1843 = SURFACE_CURVE('',#1844,(#1848,#1855),.PCURVE_S1.);+#1844 = LINE('',#1845,#1846);+#1845 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#1846 = VECTOR('',#1847,1.);+#1847 = DIRECTION('',(0.,-1.,0.));+#1848 = PCURVE('',#227,#1849);+#1849 = DEFINITIONAL_REPRESENTATION('',(#1850),#1854);+#1850 = LINE('',#1851,#1852);+#1851 = CARTESIAN_POINT('',(8.9462039413E-02,2.25));+#1852 = VECTOR('',#1853,1.);+#1853 = DIRECTION('',(0.,-1.));+#1854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1855 = PCURVE('',#1856,#1861);+#1856 = PLANE('',#1857);+#1857 = AXIS2_PLACEMENT_3D('',#1858,#1859,#1860);+#1858 = CARTESIAN_POINT('',(1.839462039413,4.485692661496,+    9.314404469578E-02));+#1859 = DIRECTION('',(1.,0.,0.));+#1860 = DIRECTION('',(0.,0.,-1.));+#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866);+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(0.,-1.));+#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1867 = ORIENTED_EDGE('',*,*,#1868,.T.);+#1868 = EDGE_CURVE('',#1841,#1869,#1871,.T.);+#1869 = VERTEX_POINT('',#1870);+#1870 = CARTESIAN_POINT('',(1.899462039389,4.41069266152,0.));+#1871 = SURFACE_CURVE('',#1872,(#1876,#1883),.PCURVE_S1.);+#1872 = LINE('',#1873,#1874);+#1873 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,0.));+#1874 = VECTOR('',#1875,1.);+#1875 = DIRECTION('',(0.624695047517,-0.780868809473,0.));+#1876 = PCURVE('',#227,#1877);+#1877 = DEFINITIONAL_REPRESENTATION('',(#1878),#1882);+#1878 = LINE('',#1879,#1880);+#1879 = CARTESIAN_POINT('',(8.9462039413E-02,2.235692661497));+#1880 = VECTOR('',#1881,1.);+#1881 = DIRECTION('',(0.624695047517,-0.780868809473));+#1882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1883 = PCURVE('',#1884,#1889);+#1884 = PLANE('',#1885);+#1885 = AXIS2_PLACEMENT_3D('',#1886,#1887,#1888);+#1886 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+    9.314404469578E-02));+#1887 = DIRECTION('',(0.780868809473,0.624695047517,0.));+#1888 = DIRECTION('',(0.624695047517,-0.780868809473,0.));+#1889 = DEFINITIONAL_REPRESENTATION('',(#1890),#1894);+#1890 = LINE('',#1891,#1892);+#1891 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1892 = VECTOR('',#1893,1.);+#1893 = DIRECTION('',(1.,0.));+#1894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1895 = ORIENTED_EDGE('',*,*,#1896,.F.);+#1896 = EDGE_CURVE('',#1897,#1869,#1899,.T.);+#1897 = VERTEX_POINT('',#1898);+#1898 = CARTESIAN_POINT('',(1.899462039407,3.285692661358,0.));+#1899 = SURFACE_CURVE('',#1900,(#1904,#1911),.PCURVE_S1.);+#1900 = LINE('',#1901,#1902);+#1901 = CARTESIAN_POINT('',(1.899462039395,3.28569266145,0.));+#1902 = VECTOR('',#1903,1.);+#1903 = DIRECTION('',(-5.387690293568E-12,1.,0.));+#1904 = PCURVE('',#227,#1905);+#1905 = DEFINITIONAL_REPRESENTATION('',(#1906),#1910);+#1906 = LINE('',#1907,#1908);+#1907 = CARTESIAN_POINT('',(0.149462039395,1.03569266145));+#1908 = VECTOR('',#1909,1.);+#1909 = DIRECTION('',(-5.387690293568E-12,1.));+#1910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1911 = PCURVE('',#1912,#1917);+#1912 = PLANE('',#1913);+#1913 = AXIS2_PLACEMENT_3D('',#1914,#1915,#1916);+#1914 = CARTESIAN_POINT('',(1.899462039389,4.335692661502,+    9.314404469578E-02));+#1915 = DIRECTION('',(1.,0.,0.));+#1916 = DIRECTION('',(-0.,1.,0.));+#1917 = DEFINITIONAL_REPRESENTATION('',(#1918),#1922);+#1918 = LINE('',#1919,#1920);+#1919 = CARTESIAN_POINT('',(-1.050000000052,-9.314404469578E-02));+#1920 = VECTOR('',#1921,1.);+#1921 = DIRECTION('',(1.,0.));+#1922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1923 = ORIENTED_EDGE('',*,*,#1924,.T.);+#1924 = EDGE_CURVE('',#1897,#1925,#1927,.T.);+#1925 = VERTEX_POINT('',#1926);+#1926 = CARTESIAN_POINT('',(1.599462039419,3.285692661496,0.));+#1927 = SURFACE_CURVE('',#1928,(#1933,#1944),.PCURVE_S1.);+#1928 = CIRCLE('',#1929,0.149999999994);+#1929 = AXIS2_PLACEMENT_3D('',#1930,#1931,#1932);+#1930 = CARTESIAN_POINT('',(1.749462039413,3.285692661496,0.));+#1931 = DIRECTION('',(0.,0.,-1.));+#1932 = DIRECTION('',(1.,-9.210587848332E-10,0.));+#1933 = PCURVE('',#227,#1934);+#1934 = DEFINITIONAL_REPRESENTATION('',(#1935),#1943);+#1935 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1936,#1937,#1938,#1939,+#1940,#1941,#1942),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1936 = CARTESIAN_POINT('',(0.149462039407,1.035692661358));+#1937 = CARTESIAN_POINT('',(0.149462039168,0.775885040233));+#1938 = CARTESIAN_POINT('',(-7.553796070365E-02,0.905788851003));+#1939 = CARTESIAN_POINT('',(-0.300537960575,1.035692661772));+#1940 = CARTESIAN_POINT('',(-7.553796046435E-02,1.165596472128));+#1941 = CARTESIAN_POINT('',(0.149462039646,1.295500282483));+#1942 = CARTESIAN_POINT('',(0.149462039407,1.035692661358));+#1943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1944 = PCURVE('',#1945,#1950);+#1945 = CYLINDRICAL_SURFACE('',#1946,0.149999999994);+#1946 = AXIS2_PLACEMENT_3D('',#1947,#1948,#1949);+#1947 = CARTESIAN_POINT('',(1.749462039413,3.285692661496,+    9.314404469578E-02));+#1948 = DIRECTION('',(0.,0.,-1.));+#1949 = DIRECTION('',(-1.,0.,0.));+#1950 = DEFINITIONAL_REPRESENTATION('',(#1951),#1955);+#1951 = LINE('',#1952,#1953);+#1952 = CARTESIAN_POINT('',(3.141592654511,9.314404469578E-02));+#1953 = VECTOR('',#1954,1.);+#1954 = DIRECTION('',(1.,0.));+#1955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1956 = ORIENTED_EDGE('',*,*,#1957,.F.);+#1957 = EDGE_CURVE('',#1958,#1925,#1960,.T.);+#1958 = VERTEX_POINT('',#1959);+#1959 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,0.));+#1960 = SURFACE_CURVE('',#1961,(#1965,#1972),.PCURVE_S1.);+#1961 = LINE('',#1962,#1963);+#1962 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,0.));+#1963 = VECTOR('',#1964,1.);+#1964 = DIRECTION('',(0.,-1.,0.));+#1965 = PCURVE('',#227,#1966);+#1966 = DEFINITIONAL_REPRESENTATION('',(#1967),#1971);+#1967 = LINE('',#1968,#1969);+#1968 = CARTESIAN_POINT('',(-0.150537960581,2.160692661497));+#1969 = VECTOR('',#1970,1.);+#1970 = DIRECTION('',(0.,-1.));+#1971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1972 = PCURVE('',#1973,#1978);+#1973 = PLANE('',#1974);+#1974 = AXIS2_PLACEMENT_3D('',#1975,#1976,#1977);+#1975 = CARTESIAN_POINT('',(1.599462039419,4.410692661499,+    9.314404469578E-02));+#1976 = DIRECTION('',(-1.,0.,0.));+#1977 = DIRECTION('',(0.,-1.,0.));+#1978 = DEFINITIONAL_REPRESENTATION('',(#1979),#1983);+#1979 = LINE('',#1980,#1981);+#1980 = CARTESIAN_POINT('',(1.999289622745E-12,-9.314404469578E-02));+#1981 = VECTOR('',#1982,1.);+#1982 = DIRECTION('',(1.,0.));+#1983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1984 = ORIENTED_EDGE('',*,*,#1985,.T.);+#1985 = EDGE_CURVE('',#1958,#1986,#1988,.T.);+#1986 = VERTEX_POINT('',#1987);+#1987 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,0.));+#1988 = SURFACE_CURVE('',#1989,(#1993,#2000),.PCURVE_S1.);+#1989 = LINE('',#1990,#1991);+#1990 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,0.));+#1991 = VECTOR('',#1992,1.);+#1992 = DIRECTION('',(0.624695047618,0.780868809392,0.));+#1993 = PCURVE('',#227,#1994);+#1994 = DEFINITIONAL_REPRESENTATION('',(#1995),#1999);+#1995 = LINE('',#1996,#1997);+#1996 = CARTESIAN_POINT('',(-0.150537960581,2.160692661497));+#1997 = VECTOR('',#1998,1.);+#1998 = DIRECTION('',(0.624695047618,0.780868809392));+#1999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2000 = PCURVE('',#2001,#2006);+#2001 = PLANE('',#2002);+#2002 = AXIS2_PLACEMENT_3D('',#2003,#2004,#2005);+#2003 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+    9.314404469578E-02));+#2004 = DIRECTION('',(-0.780868809392,0.624695047618,0.));+#2005 = DIRECTION('',(0.624695047618,0.780868809392,0.));+#2006 = DEFINITIONAL_REPRESENTATION('',(#2007),#2011);+#2007 = LINE('',#2008,#2009);+#2008 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2009 = VECTOR('',#2010,1.);+#2010 = DIRECTION('',(1.,0.));+#2011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2012 = ORIENTED_EDGE('',*,*,#2013,.F.);+#2013 = EDGE_CURVE('',#2014,#1986,#2016,.T.);+#2014 = VERTEX_POINT('',#2015);+#2015 = CARTESIAN_POINT('',(1.659462039431,4.5,0.));+#2016 = SURFACE_CURVE('',#2017,(#2021,#2028),.PCURVE_S1.);+#2017 = LINE('',#2018,#2019);+#2018 = CARTESIAN_POINT('',(1.659462039431,4.5,0.));+#2019 = VECTOR('',#2020,1.);+#2020 = DIRECTION('',(0.,-1.,0.));+#2021 = PCURVE('',#227,#2022);+#2022 = DEFINITIONAL_REPRESENTATION('',(#2023),#2027);+#2023 = LINE('',#2024,#2025);+#2024 = CARTESIAN_POINT('',(-9.0537960569E-02,2.25));+#2025 = VECTOR('',#2026,1.);+#2026 = DIRECTION('',(0.,-1.));+#2027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2028 = PCURVE('',#2029,#2034);+#2029 = PLANE('',#2030);+#2030 = AXIS2_PLACEMENT_3D('',#2031,#2032,#2033);+#2031 = CARTESIAN_POINT('',(1.659462039431,4.485692661496,+    -6.855955304215E-03));+#2032 = DIRECTION('',(-1.,0.,0.));+#2033 = DIRECTION('',(0.,0.,1.));+#2034 = DEFINITIONAL_REPRESENTATION('',(#2035),#2039);+#2035 = LINE('',#2036,#2037);+#2036 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#2037 = VECTOR('',#2038,1.);+#2038 = DIRECTION('',(0.,-1.));+#2039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2040 = ORIENTED_EDGE('',*,*,#2041,.F.);+#2041 = EDGE_CURVE('',#2042,#2014,#2044,.T.);+#2042 = VERTEX_POINT('',#2043);+#2043 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#2044 = SURFACE_CURVE('',#2045,(#2049,#2056),.PCURVE_S1.);+#2045 = LINE('',#2046,#2047);+#2046 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#2047 = VECTOR('',#2048,1.);+#2048 = DIRECTION('',(1.,0.,0.));+#2049 = PCURVE('',#227,#2050);+#2050 = DEFINITIONAL_REPRESENTATION('',(#2051),#2055);+#2051 = LINE('',#2052,#2053);+#2052 = CARTESIAN_POINT('',(-0.410537960579,2.25));+#2053 = VECTOR('',#2054,1.);+#2054 = DIRECTION('',(1.,0.));+#2055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2056 = PCURVE('',#168,#2057);+#2057 = DEFINITIONAL_REPRESENTATION('',(#2058),#2062);+#2058 = LINE('',#2059,#2060);+#2059 = CARTESIAN_POINT('',(2.160537960579,0.));+#2060 = VECTOR('',#2061,1.);+#2061 = DIRECTION('',(-1.,0.));+#2062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2063 = ORIENTED_EDGE('',*,*,#2064,.T.);+#2064 = EDGE_CURVE('',#2042,#2065,#2067,.T.);+#2065 = VERTEX_POINT('',#2066);+#2066 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,0.));+#2067 = SURFACE_CURVE('',#2068,(#2072,#2079),.PCURVE_S1.);+#2068 = LINE('',#2069,#2070);+#2069 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#2070 = VECTOR('',#2071,1.);+#2071 = DIRECTION('',(0.,-1.,0.));+#2072 = PCURVE('',#227,#2073);+#2073 = DEFINITIONAL_REPRESENTATION('',(#2074),#2078);+#2074 = LINE('',#2075,#2076);+#2075 = CARTESIAN_POINT('',(-0.410537960579,2.25));+#2076 = VECTOR('',#2077,1.);+#2077 = DIRECTION('',(0.,-1.));+#2078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2079 = PCURVE('',#2080,#2085);+#2080 = PLANE('',#2081);+#2081 = AXIS2_PLACEMENT_3D('',#2082,#2083,#2084);+#2082 = CARTESIAN_POINT('',(1.339462039421,4.485692661496,+    9.314404469578E-02));+#2083 = DIRECTION('',(1.,0.,0.));+#2084 = DIRECTION('',(0.,0.,-1.));+#2085 = DEFINITIONAL_REPRESENTATION('',(#2086),#2090);+#2086 = LINE('',#2087,#2088);+#2087 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#2088 = VECTOR('',#2089,1.);+#2089 = DIRECTION('',(0.,-1.));+#2090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2091 = ORIENTED_EDGE('',*,*,#2092,.T.);+#2092 = EDGE_CURVE('',#2065,#2093,#2095,.T.);+#2093 = VERTEX_POINT('',#2094);+#2094 = CARTESIAN_POINT('',(1.374462039409,4.410692661536,0.));+#2095 = SURFACE_CURVE('',#2096,(#2100,#2107),.PCURVE_S1.);+#2096 = LINE('',#2097,#2098);+#2097 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,0.));+#2098 = VECTOR('',#2099,1.);+#2099 = DIRECTION('',(0.422885465402,-0.906183139962,0.));+#2100 = PCURVE('',#227,#2101);+#2101 = DEFINITIONAL_REPRESENTATION('',(#2102),#2106);+#2102 = LINE('',#2103,#2104);+#2103 = CARTESIAN_POINT('',(-0.410537960579,2.235692661497));+#2104 = VECTOR('',#2105,1.);+#2105 = DIRECTION('',(0.422885465402,-0.906183139962));+#2106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2107 = PCURVE('',#2108,#2113);+#2108 = PLANE('',#2109);+#2109 = AXIS2_PLACEMENT_3D('',#2110,#2111,#2112);+#2110 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+    9.314404469578E-02));+#2111 = DIRECTION('',(0.906183139962,0.422885465402,0.));+#2112 = DIRECTION('',(0.422885465402,-0.906183139962,0.));+#2113 = DEFINITIONAL_REPRESENTATION('',(#2114),#2118);+#2114 = LINE('',#2115,#2116);+#2115 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2116 = VECTOR('',#2117,1.);+#2117 = DIRECTION('',(1.,0.));+#2118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2119 = ORIENTED_EDGE('',*,*,#2120,.F.);+#2120 = EDGE_CURVE('',#2121,#2093,#2123,.T.);+#2121 = VERTEX_POINT('',#2122);+#2122 = CARTESIAN_POINT('',(1.37446203942,4.010692661411,0.));+#2123 = SURFACE_CURVE('',#2124,(#2128,#2135),.PCURVE_S1.);+#2124 = LINE('',#2125,#2126);+#2125 = CARTESIAN_POINT('',(1.374462039413,4.010692661467,0.));+#2126 = VECTOR('',#2127,1.);+#2127 = DIRECTION('',(-9.090506124061E-12,1.,0.));+#2128 = PCURVE('',#227,#2129);+#2129 = DEFINITIONAL_REPRESENTATION('',(#2130),#2134);+#2130 = LINE('',#2131,#2132);+#2131 = CARTESIAN_POINT('',(-0.375537960587,1.760692661467));+#2132 = VECTOR('',#2133,1.);+#2133 = DIRECTION('',(-9.090506124061E-12,1.));+#2134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2135 = PCURVE('',#2136,#2141);+#2136 = PLANE('',#2137);+#2137 = AXIS2_PLACEMENT_3D('',#2138,#2139,#2140);+#2138 = CARTESIAN_POINT('',(1.374462039409,4.335692661502,+    9.314404469578E-02));+#2139 = DIRECTION('',(1.,0.,0.));+#2140 = DIRECTION('',(-0.,1.,0.));+#2141 = DEFINITIONAL_REPRESENTATION('',(#2142),#2146);+#2142 = LINE('',#2143,#2144);+#2143 = CARTESIAN_POINT('',(-0.325000000035,-9.314404469578E-02));+#2144 = VECTOR('',#2145,1.);+#2145 = DIRECTION('',(1.,0.));+#2146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2147 = ORIENTED_EDGE('',*,*,#2148,.T.);+#2148 = EDGE_CURVE('',#2121,#2149,#2151,.T.);+#2149 = VERTEX_POINT('',#2150);+#2150 = CARTESIAN_POINT('',(1.12446203942,4.01069266155,0.));+#2151 = SURFACE_CURVE('',#2152,(#2157,#2168),.PCURVE_S1.);+#2152 = CIRCLE('',#2153,0.125);+#2153 = AXIS2_PLACEMENT_3D('',#2154,#2155,#2156);+#2154 = CARTESIAN_POINT('',(1.24946203942,4.010692661494,0.));+#2155 = DIRECTION('',(0.,0.,-1.));+#2156 = DIRECTION('',(1.,-6.629505833189E-10,0.));+#2157 = PCURVE('',#227,#2158);+#2158 = DEFINITIONAL_REPRESENTATION('',(#2159),#2167);+#2159 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2160,#2161,#2162,#2163,+#2164,#2165,#2166),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2160 = CARTESIAN_POINT('',(-0.37553796058,1.760692661411));+#2161 = CARTESIAN_POINT('',(-0.375537960724,1.544186310465));+#2162 = CARTESIAN_POINT('',(-0.563037960652,1.652439486062));+#2163 = CARTESIAN_POINT('',(-0.75053796058,1.76069266166));+#2164 = CARTESIAN_POINT('',(-0.563037960508,1.868945837008));+#2165 = CARTESIAN_POINT('',(-0.375537960436,1.977199012357));+#2166 = CARTESIAN_POINT('',(-0.37553796058,1.760692661411));+#2167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2168 = PCURVE('',#2169,#2174);+#2169 = CYLINDRICAL_SURFACE('',#2170,0.125);+#2170 = AXIS2_PLACEMENT_3D('',#2171,#2172,#2173);+#2171 = CARTESIAN_POINT('',(1.24946203942,4.010692661494,+    9.314404469578E-02));+#2172 = DIRECTION('',(0.,0.,-1.));+#2173 = DIRECTION('',(-1.,4.548899451297E-12,0.));+#2174 = DEFINITIONAL_REPRESENTATION('',(#2175),#2179);+#2175 = LINE('',#2176,#2177);+#2176 = CARTESIAN_POINT('',(3.141592654248,9.314404469578E-02));+#2177 = VECTOR('',#2178,1.);+#2178 = DIRECTION('',(1.,0.));+#2179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2180 = ORIENTED_EDGE('',*,*,#2181,.F.);+#2181 = EDGE_CURVE('',#2182,#2149,#2184,.T.);+#2182 = VERTEX_POINT('',#2183);+#2183 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,0.));+#2184 = SURFACE_CURVE('',#2185,(#2189,#2196),.PCURVE_S1.);+#2185 = LINE('',#2186,#2187);+#2186 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,0.));+#2187 = VECTOR('',#2188,1.);+#2188 = DIRECTION('',(6.061817714661E-12,-1.,0.));+#2189 = PCURVE('',#227,#2190);+#2190 = DEFINITIONAL_REPRESENTATION('',(#2191),#2195);+#2191 = LINE('',#2192,#2193);+#2192 = CARTESIAN_POINT('',(-0.625537960587,2.160692661499));+#2193 = VECTOR('',#2194,1.);+#2194 = DIRECTION('',(6.061817714661E-12,-1.));+#2195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2196 = PCURVE('',#2197,#2202);+#2197 = PLANE('',#2198);+#2198 = AXIS2_PLACEMENT_3D('',#2199,#2200,#2201);+#2199 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+    9.314404469578E-02));+#2200 = DIRECTION('',(-1.,0.,0.));+#2201 = DIRECTION('',(0.,-1.,0.));+#2202 = DEFINITIONAL_REPRESENTATION('',(#2203),#2207);+#2203 = LINE('',#2204,#2205);+#2204 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#2205 = VECTOR('',#2206,1.);+#2206 = DIRECTION('',(1.,0.));+#2207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2208 = ORIENTED_EDGE('',*,*,#2209,.F.);+#2209 = EDGE_CURVE('',#2210,#2182,#2212,.T.);+#2210 = VERTEX_POINT('',#2211);+#2211 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,0.));+#2212 = SURFACE_CURVE('',#2213,(#2217,#2224),.PCURVE_S1.);+#2213 = LINE('',#2214,#2215);+#2214 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,0.));+#2215 = VECTOR('',#2216,1.);+#2216 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#2217 = PCURVE('',#227,#2218);+#2218 = DEFINITIONAL_REPRESENTATION('',(#2219),#2223);+#2219 = LINE('',#2220,#2221);+#2220 = CARTESIAN_POINT('',(-0.59053796058,2.235692661496));+#2221 = VECTOR('',#2222,1.);+#2222 = DIRECTION('',(-0.422885465415,-0.906183139956));+#2223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2224 = PCURVE('',#2225,#2230);+#2225 = PLANE('',#2226);+#2226 = AXIS2_PLACEMENT_3D('',#2227,#2228,#2229);+#2227 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+    9.314404469578E-02));+#2228 = DIRECTION('',(-0.906183139956,0.422885465415,0.));+#2229 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#2230 = DEFINITIONAL_REPRESENTATION('',(#2231),#2235);+#2231 = LINE('',#2232,#2233);+#2232 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#2233 = VECTOR('',#2234,1.);+#2234 = DIRECTION('',(1.,0.));+#2235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2236 = ORIENTED_EDGE('',*,*,#2237,.F.);+#2237 = EDGE_CURVE('',#2238,#2210,#2240,.T.);+#2238 = VERTEX_POINT('',#2239);+#2239 = CARTESIAN_POINT('',(1.15946203942,4.5,0.));+#2240 = SURFACE_CURVE('',#2241,(#2245,#2252),.PCURVE_S1.);+#2241 = LINE('',#2242,#2243);+#2242 = CARTESIAN_POINT('',(1.15946203942,4.5,0.));+#2243 = VECTOR('',#2244,1.);+#2244 = DIRECTION('',(0.,-1.,0.));+#2245 = PCURVE('',#227,#2246);+#2246 = DEFINITIONAL_REPRESENTATION('',(#2247),#2251);+#2247 = LINE('',#2248,#2249);+#2248 = CARTESIAN_POINT('',(-0.59053796058,2.25));+#2249 = VECTOR('',#2250,1.);+#2250 = DIRECTION('',(0.,-1.));+#2251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2252 = PCURVE('',#2253,#2258);+#2253 = PLANE('',#2254);+#2254 = AXIS2_PLACEMENT_3D('',#2255,#2256,#2257);+#2255 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+    -6.855955304216E-03));+#2256 = DIRECTION('',(-1.,0.,0.));+#2257 = DIRECTION('',(0.,0.,1.));+#2258 = DEFINITIONAL_REPRESENTATION('',(#2259),#2263);+#2259 = LINE('',#2260,#2261);+#2260 = CARTESIAN_POINT('',(6.855955304216E-03,1.4307338504E-02));+#2261 = VECTOR('',#2262,1.);+#2262 = DIRECTION('',(0.,-1.));+#2263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2264 = ORIENTED_EDGE('',*,*,#2265,.F.);+#2265 = EDGE_CURVE('',#2266,#2238,#2268,.T.);+#2266 = VERTEX_POINT('',#2267);+#2267 = CARTESIAN_POINT('',(0.,4.5,0.));+#2268 = SURFACE_CURVE('',#2269,(#2273,#2280),.PCURVE_S1.);+#2269 = LINE('',#2270,#2271);+#2270 = CARTESIAN_POINT('',(0.,4.5,0.));+#2271 = VECTOR('',#2272,1.);+#2272 = DIRECTION('',(1.,0.,0.));+#2273 = PCURVE('',#227,#2274);+#2274 = DEFINITIONAL_REPRESENTATION('',(#2275),#2279);+#2275 = LINE('',#2276,#2277);+#2276 = CARTESIAN_POINT('',(-1.75,2.25));+#2277 = VECTOR('',#2278,1.);+#2278 = DIRECTION('',(1.,0.));+#2279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2280 = PCURVE('',#168,#2281);+#2281 = DEFINITIONAL_REPRESENTATION('',(#2282),#2286);+#2282 = LINE('',#2283,#2284);+#2283 = CARTESIAN_POINT('',(3.5,0.));+#2284 = VECTOR('',#2285,1.);+#2285 = DIRECTION('',(-1.,0.));+#2286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2287 = ORIENTED_EDGE('',*,*,#2288,.F.);+#2288 = EDGE_CURVE('',#2289,#2266,#2291,.T.);+#2289 = VERTEX_POINT('',#2290);+#2290 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#2291 = SURFACE_CURVE('',#2292,(#2296,#2303),.PCURVE_S1.);+#2292 = LINE('',#2293,#2294);+#2293 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#2294 = VECTOR('',#2295,1.);+#2295 = DIRECTION('',(0.,1.,0.));+#2296 = PCURVE('',#227,#2297);+#2297 = DEFINITIONAL_REPRESENTATION('',(#2298),#2302);+#2298 = LINE('',#2299,#2300);+#2299 = CARTESIAN_POINT('',(-1.75,1.975943709765));+#2300 = VECTOR('',#2301,1.);+#2301 = DIRECTION('',(0.,1.));+#2302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2303 = PCURVE('',#140,#2304);+#2304 = DEFINITIONAL_REPRESENTATION('',(#2305),#2309);+#2305 = LINE('',#2306,#2307);+#2306 = CARTESIAN_POINT('',(0.274056290235,0.));+#2307 = VECTOR('',#2308,1.);+#2308 = DIRECTION('',(-1.,0.));+#2309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2310 = ORIENTED_EDGE('',*,*,#2311,.T.);+#2311 = EDGE_CURVE('',#2289,#2312,#2314,.T.);+#2312 = VERTEX_POINT('',#2313);+#2313 = CARTESIAN_POINT('',(7.446203941993E-02,4.260692661496,0.));+#2314 = SURFACE_CURVE('',#2315,(#2319,#2326),.PCURVE_S1.);+#2315 = LINE('',#2316,#2317);+#2316 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#2317 = VECTOR('',#2318,1.);+#2318 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#2319 = PCURVE('',#227,#2320);+#2320 = DEFINITIONAL_REPRESENTATION('',(#2321),#2325);+#2321 = LINE('',#2322,#2323);+#2322 = CARTESIAN_POINT('',(-1.75,1.975943709765));+#2323 = VECTOR('',#2324,1.);+#2324 = DIRECTION('',(0.906183139987,0.422885465348));+#2325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2326 = PCURVE('',#2327,#2332);+#2327 = PLANE('',#2328);+#2328 = AXIS2_PLACEMENT_3D('',#2329,#2330,#2331);+#2329 = CARTESIAN_POINT('',(-5.379605796008E-04,4.225692661494,+    9.314404469578E-02));+#2330 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#2331 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#2332 = DEFINITIONAL_REPRESENTATION('',(#2333),#2337);+#2333 = LINE('',#2334,#2335);+#2334 = CARTESIAN_POINT('',(5.936554721189E-04,9.314404469578E-02));+#2335 = VECTOR('',#2336,1.);+#2336 = DIRECTION('',(1.,0.));+#2337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2338 = ORIENTED_EDGE('',*,*,#2339,.F.);+#2339 = EDGE_CURVE('',#2340,#2312,#2342,.T.);+#2340 = VERTEX_POINT('',#2341);+#2341 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#2342 = SURFACE_CURVE('',#2343,(#2347,#2354),.PCURVE_S1.);+#2343 = LINE('',#2344,#2345);+#2344 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#2345 = VECTOR('',#2346,1.);+#2346 = DIRECTION('',(-1.,0.,0.));+#2347 = PCURVE('',#227,#2348);+#2348 = DEFINITIONAL_REPRESENTATION('',(#2349),#2353);+#2349 = LINE('',#2350,#2351);+#2350 = CARTESIAN_POINT('',(-1.550537960575,2.010692661496));+#2351 = VECTOR('',#2352,1.);+#2352 = DIRECTION('',(-1.,0.));+#2353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2354 = PCURVE('',#2355,#2360);+#2355 = PLANE('',#2356);+#2356 = AXIS2_PLACEMENT_3D('',#2357,#2358,#2359);+#2357 = CARTESIAN_POINT('',(0.149462046017,4.260692661496,+    9.314404469578E-02));+#2358 = DIRECTION('',(0.,1.,0.));+#2359 = DIRECTION('',(-1.,0.,0.));+#2360 = DEFINITIONAL_REPRESENTATION('',(#2361),#2365);+#2361 = LINE('',#2362,#2363);+#2362 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#2363 = VECTOR('',#2364,1.);+#2364 = DIRECTION('',(1.,0.));+#2365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2366 = ORIENTED_EDGE('',*,*,#2367,.T.);+#2367 = EDGE_CURVE('',#2340,#2368,#2370,.T.);+#2368 = VERTEX_POINT('',#2369);+#2369 = CARTESIAN_POINT('',(0.199462039425,4.385692661494,0.));+#2370 = SURFACE_CURVE('',#2371,(#2375,#2382),.PCURVE_S1.);+#2371 = LINE('',#2372,#2373);+#2372 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#2373 = VECTOR('',#2374,1.);+#2374 = DIRECTION('',(0.,1.,0.));+#2375 = PCURVE('',#227,#2376);+#2376 = DEFINITIONAL_REPRESENTATION('',(#2377),#2381);+#2377 = LINE('',#2378,#2379);+#2378 = CARTESIAN_POINT('',(-1.550537960575,2.010692661496));+#2379 = VECTOR('',#2380,1.);+#2380 = DIRECTION('',(0.,1.));+#2381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2382 = PCURVE('',#2383,#2388);+#2383 = PLANE('',#2384);+#2384 = AXIS2_PLACEMENT_3D('',#2385,#2386,#2387);+#2385 = CARTESIAN_POINT('',(0.199462039425,4.260692661495,+    9.314404469578E-02));+#2386 = DIRECTION('',(-1.,0.,0.));+#2387 = DIRECTION('',(0.,1.,0.));+#2388 = DEFINITIONAL_REPRESENTATION('',(#2389),#2393);+#2389 = LINE('',#2390,#2391);+#2390 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#2391 = VECTOR('',#2392,1.);+#2392 = DIRECTION('',(1.,0.));+#2393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2394 = ORIENTED_EDGE('',*,*,#2395,.F.);+#2395 = EDGE_CURVE('',#2396,#2368,#2398,.T.);+#2396 = VERTEX_POINT('',#2397);+#2397 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#2398 = SURFACE_CURVE('',#2399,(#2403,#2410),.PCURVE_S1.);+#2399 = LINE('',#2400,#2401);+#2400 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#2401 = VECTOR('',#2402,1.);+#2402 = DIRECTION('',(-1.,0.,0.));+#2403 = PCURVE('',#227,#2404);+#2404 = DEFINITIONAL_REPRESENTATION('',(#2405),#2409);+#2405 = LINE('',#2406,#2407);+#2406 = CARTESIAN_POINT('',(-0.825537960573,2.135692661494));+#2407 = VECTOR('',#2408,1.);+#2408 = DIRECTION('',(-1.,0.));+#2409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2410 = PCURVE('',#2411,#2416);+#2411 = PLANE('',#2412);+#2412 = AXIS2_PLACEMENT_3D('',#2413,#2414,#2415);+#2413 = CARTESIAN_POINT('',(0.824462039407,4.385692661494,+    9.314404469578E-02));+#2414 = DIRECTION('',(0.,1.,0.));+#2415 = DIRECTION('',(-1.,0.,0.));+#2416 = DEFINITIONAL_REPRESENTATION('',(#2417),#2421);+#2417 = LINE('',#2418,#2419);+#2418 = CARTESIAN_POINT('',(-0.10000000002,-9.314404469578E-02));+#2419 = VECTOR('',#2420,1.);+#2420 = DIRECTION('',(1.,0.));+#2421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2422 = ORIENTED_EDGE('',*,*,#2423,.T.);+#2423 = EDGE_CURVE('',#2396,#2424,#2426,.T.);+#2424 = VERTEX_POINT('',#2425);+#2425 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,0.));+#2426 = SURFACE_CURVE('',#2427,(#2431,#2438),.PCURVE_S1.);+#2427 = LINE('',#2428,#2429);+#2428 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#2429 = VECTOR('',#2430,1.);+#2430 = DIRECTION('',(0.,-1.,0.));+#2431 = PCURVE('',#227,#2432);+#2432 = DEFINITIONAL_REPRESENTATION('',(#2433),#2437);+#2433 = LINE('',#2434,#2435);+#2434 = CARTESIAN_POINT('',(-0.825537960573,2.135692661494));+#2435 = VECTOR('',#2436,1.);+#2436 = DIRECTION('',(0.,-1.));+#2437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2438 = PCURVE('',#2439,#2444);+#2439 = PLANE('',#2440);+#2440 = AXIS2_PLACEMENT_3D('',#2441,#2442,#2443);+#2441 = CARTESIAN_POINT('',(0.924462039427,3.912894220607,+    9.314404469578E-02));+#2442 = DIRECTION('',(1.,0.,0.));+#2443 = DIRECTION('',(-0.,1.,0.));+#2444 = DEFINITIONAL_REPRESENTATION('',(#2445),#2449);+#2445 = LINE('',#2446,#2447);+#2446 = CARTESIAN_POINT('',(0.472798440887,-9.314404469578E-02));+#2447 = VECTOR('',#2448,1.);+#2448 = DIRECTION('',(-1.,0.));+#2449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2450 = ORIENTED_EDGE('',*,*,#2451,.T.);+#2451 = EDGE_CURVE('',#2424,#2452,#2454,.T.);+#2452 = VERTEX_POINT('',#2453);+#2453 = CARTESIAN_POINT('',(0.724462039428,4.010692661499,0.));+#2454 = SURFACE_CURVE('',#2455,(#2459,#2466),.PCURVE_S1.);+#2455 = LINE('',#2456,#2457);+#2456 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,0.));+#2457 = VECTOR('',#2458,1.);+#2458 = DIRECTION('',(-0.707106781195,-0.707106781178,0.));+#2459 = PCURVE('',#227,#2460);+#2460 = DEFINITIONAL_REPRESENTATION('',(#2461),#2465);+#2461 = LINE('',#2462,#2463);+#2462 = CARTESIAN_POINT('',(-0.825537960573,1.960692661494));+#2463 = VECTOR('',#2464,1.);+#2464 = DIRECTION('',(-0.707106781195,-0.707106781178));+#2465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2466 = PCURVE('',#2467,#2472);+#2467 = PLANE('',#2468);+#2468 = AXIS2_PLACEMENT_3D('',#2469,#2470,#2471);+#2469 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+    9.314404469578E-02));+#2470 = DIRECTION('',(0.707106781178,-0.707106781195,0.));+#2471 = DIRECTION('',(-0.707106781195,-0.707106781178,0.));+#2472 = DEFINITIONAL_REPRESENTATION('',(#2473),#2477);+#2473 = LINE('',#2474,#2475);+#2474 = CARTESIAN_POINT('',(-0.,9.314404469578E-02));+#2475 = VECTOR('',#2476,1.);+#2476 = DIRECTION('',(1.,0.));+#2477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2478 = ORIENTED_EDGE('',*,*,#2479,.F.);+#2479 = EDGE_CURVE('',#2480,#2452,#2482,.T.);+#2480 = VERTEX_POINT('',#2481);+#2481 = CARTESIAN_POINT('',(7.446204602042E-02,4.010692661499,0.));+#2482 = SURFACE_CURVE('',#2483,(#2487,#2494),.PCURVE_S1.);+#2483 = LINE('',#2484,#2485);+#2484 = CARTESIAN_POINT('',(7.446204602042E-02,4.010692661499,0.));+#2485 = VECTOR('',#2486,1.);+#2486 = DIRECTION('',(1.,0.,0.));+#2487 = PCURVE('',#227,#2488);+#2488 = DEFINITIONAL_REPRESENTATION('',(#2489),#2493);+#2489 = LINE('',#2490,#2491);+#2490 = CARTESIAN_POINT('',(-1.67553795398,1.760692661499));+#2491 = VECTOR('',#2492,1.);+#2492 = DIRECTION('',(1.,0.));+#2493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2494 = PCURVE('',#2495,#2500);+#2495 = PLANE('',#2496);+#2496 = AXIS2_PLACEMENT_3D('',#2497,#2498,#2499);+#2497 = CARTESIAN_POINT('',(7.446204602042E-02,4.010692661499,+    9.314404469578E-02));+#2498 = DIRECTION('',(0.,-1.,0.));+#2499 = DIRECTION('',(1.,0.,0.));+#2500 = DEFINITIONAL_REPRESENTATION('',(#2501),#2505);+#2501 = LINE('',#2502,#2503);+#2502 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#2503 = VECTOR('',#2504,1.);+#2504 = DIRECTION('',(1.,0.));+#2505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2506 = ORIENTED_EDGE('',*,*,#2507,.F.);+#2507 = EDGE_CURVE('',#2508,#2480,#2510,.T.);+#2508 = VERTEX_POINT('',#2509);+#2509 = CARTESIAN_POINT('',(0.,4.04544161631,0.));+#2510 = SURFACE_CURVE('',#2511,(#2515,#2522),.PCURVE_S1.);+#2511 = LINE('',#2512,#2513);+#2512 = CARTESIAN_POINT('',(0.,4.04544161631,0.));+#2513 = VECTOR('',#2514,1.);+#2514 = DIRECTION('',(0.90618313999,-0.422885465343,0.));+#2515 = PCURVE('',#227,#2516);+#2516 = DEFINITIONAL_REPRESENTATION('',(#2517),#2521);+#2517 = LINE('',#2518,#2519);+#2518 = CARTESIAN_POINT('',(-1.75,1.79544161631));+#2519 = VECTOR('',#2520,1.);+#2520 = DIRECTION('',(0.90618313999,-0.422885465343));+#2521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2522 = PCURVE('',#2523,#2528);+#2523 = PLANE('',#2524);+#2524 = AXIS2_PLACEMENT_3D('',#2525,#2526,#2527);+#2525 = CARTESIAN_POINT('',(-5.379605796011E-04,4.045692664581,+    9.314404469578E-02));+#2526 = DIRECTION('',(-0.422885465343,-0.90618313999,0.));+#2527 = DIRECTION('',(0.90618313999,-0.422885465343,0.));+#2528 = DEFINITIONAL_REPRESENTATION('',(#2529),#2533);+#2529 = LINE('',#2530,#2531);+#2530 = CARTESIAN_POINT('',(5.936554721189E-04,-9.314404469578E-02));+#2531 = VECTOR('',#2532,1.);+#2532 = DIRECTION('',(1.,0.));+#2533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2534 = ORIENTED_EDGE('',*,*,#2535,.F.);+#2535 = EDGE_CURVE('',#2536,#2508,#2538,.T.);+#2536 = VERTEX_POINT('',#2537);+#2537 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#2538 = SURFACE_CURVE('',#2539,(#2543,#2550),.PCURVE_S1.);+#2539 = LINE('',#2540,#2541);+#2540 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#2541 = VECTOR('',#2542,1.);+#2542 = DIRECTION('',(0.,1.,0.));+#2543 = PCURVE('',#227,#2544);+#2544 = DEFINITIONAL_REPRESENTATION('',(#2545),#2549);+#2545 = LINE('',#2546,#2547);+#2546 = CARTESIAN_POINT('',(-1.75,1.225943712833));+#2547 = VECTOR('',#2548,1.);+#2548 = DIRECTION('',(0.,1.));+#2549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2550 = PCURVE('',#140,#2551);+#2551 = DEFINITIONAL_REPRESENTATION('',(#2552),#2556);+#2552 = LINE('',#2553,#2554);+#2553 = CARTESIAN_POINT('',(1.024056287167,0.));+#2554 = VECTOR('',#2555,1.);+#2555 = DIRECTION('',(-1.,0.));+#2556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2557 = ORIENTED_EDGE('',*,*,#2558,.T.);+#2558 = EDGE_CURVE('',#2536,#2559,#2561,.T.);+#2559 = VERTEX_POINT('',#2560);+#2560 = CARTESIAN_POINT('',(7.446203942479E-02,3.510692661498,0.));+#2561 = SURFACE_CURVE('',#2562,(#2566,#2573),.PCURVE_S1.);+#2562 = LINE('',#2563,#2564);+#2563 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#2564 = VECTOR('',#2565,1.);+#2565 = DIRECTION('',(0.906183154297,0.422885434685,0.));+#2566 = PCURVE('',#227,#2567);+#2567 = DEFINITIONAL_REPRESENTATION('',(#2568),#2572);+#2568 = LINE('',#2569,#2570);+#2569 = CARTESIAN_POINT('',(-1.75,1.225943712833));+#2570 = VECTOR('',#2571,1.);+#2571 = DIRECTION('',(0.906183154297,0.422885434685));+#2572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2573 = PCURVE('',#2574,#2579);+#2574 = PLANE('',#2575);+#2575 = AXIS2_PLACEMENT_3D('',#2576,#2577,#2578);+#2576 = CARTESIAN_POINT('',(-5.379672007239E-04,3.475692661494,+    9.314404469578E-02));+#2577 = DIRECTION('',(-0.422885434685,0.906183154297,0.));+#2578 = DIRECTION('',(0.906183154297,0.422885434685,0.));+#2579 = DEFINITIONAL_REPRESENTATION('',(#2580),#2584);+#2580 = LINE('',#2581,#2582);+#2581 = CARTESIAN_POINT('',(5.936627694815E-04,9.314404469578E-02));+#2582 = VECTOR('',#2583,1.);+#2583 = DIRECTION('',(1.,0.));+#2584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2585 = ORIENTED_EDGE('',*,*,#2586,.F.);+#2586 = EDGE_CURVE('',#2587,#2559,#2589,.T.);+#2587 = VERTEX_POINT('',#2588);+#2588 = CARTESIAN_POINT('',(0.774462032809,3.510692661495,0.));+#2589 = SURFACE_CURVE('',#2590,(#2594,#2601),.PCURVE_S1.);+#2590 = LINE('',#2591,#2592);+#2591 = CARTESIAN_POINT('',(0.774462032823,3.510692661497,0.));+#2592 = VECTOR('',#2593,1.);+#2593 = DIRECTION('',(-1.,1.30054698397E-12,0.));+#2594 = PCURVE('',#227,#2595);+#2595 = DEFINITIONAL_REPRESENTATION('',(#2596),#2600);+#2596 = LINE('',#2597,#2598);+#2597 = CARTESIAN_POINT('',(-0.975537967177,1.260692661497));+#2598 = VECTOR('',#2599,1.);+#2599 = DIRECTION('',(-1.,1.30054698397E-12));+#2600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2601 = PCURVE('',#2602,#2607);+#2602 = PLANE('',#2603);+#2603 = AXIS2_PLACEMENT_3D('',#2604,#2605,#2606);+#2604 = CARTESIAN_POINT('',(0.149462039396,3.510692661498,+    9.314404469578E-02));+#2605 = DIRECTION('',(0.,1.,0.));+#2606 = DIRECTION('',(-1.,0.,0.));+#2607 = DEFINITIONAL_REPRESENTATION('',(#2608),#2612);+#2608 = LINE('',#2609,#2610);+#2609 = CARTESIAN_POINT('',(-0.624999993427,-9.314404469578E-02));+#2610 = VECTOR('',#2611,1.);+#2611 = DIRECTION('',(1.,0.));+#2612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2613 = ORIENTED_EDGE('',*,*,#2614,.T.);+#2614 = EDGE_CURVE('',#2587,#2615,#2617,.T.);+#2615 = VERTEX_POINT('',#2616);+#2616 = CARTESIAN_POINT('',(0.774462032809,3.260692661495,0.));+#2617 = SURFACE_CURVE('',#2618,(#2623,#2634),.PCURVE_S1.);+#2618 = CIRCLE('',#2619,0.125);+#2619 = AXIS2_PLACEMENT_3D('',#2620,#2621,#2622);+#2620 = CARTESIAN_POINT('',(0.77446203283,3.385692661495,0.));+#2621 = DIRECTION('',(0.,0.,-1.));+#2622 = DIRECTION('',(-1.6587797802E-10,1.,0.));+#2623 = PCURVE('',#227,#2624);+#2624 = DEFINITIONAL_REPRESENTATION('',(#2625),#2633);+#2625 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2626,#2627,#2628,#2629,+#2630,#2631,#2632),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2626 = CARTESIAN_POINT('',(-0.975537967191,1.260692661495));+#2627 = CARTESIAN_POINT('',(-0.759031616245,1.260692661531));+#2628 = CARTESIAN_POINT('',(-0.867284791687,1.073192661513));+#2629 = CARTESIAN_POINT('',(-0.975537967129,0.885692661495));+#2630 = CARTESIAN_POINT('',(-1.083791142633,1.073192661477));+#2631 = CARTESIAN_POINT('',(-1.192044318137,1.260692661459));+#2632 = CARTESIAN_POINT('',(-0.975537967191,1.260692661495));+#2633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2634 = PCURVE('',#2635,#2640);+#2635 = CYLINDRICAL_SURFACE('',#2636,0.125);+#2636 = AXIS2_PLACEMENT_3D('',#2637,#2638,#2639);+#2637 = CARTESIAN_POINT('',(0.77446203283,3.385692661495,+    9.314404469578E-02));+#2638 = DIRECTION('',(0.,0.,-1.));+#2639 = DIRECTION('',(0.,1.,0.));+#2640 = DEFINITIONAL_REPRESENTATION('',(#2641),#2645);+#2641 = LINE('',#2642,#2643);+#2642 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2643 = VECTOR('',#2644,1.);+#2644 = DIRECTION('',(1.,0.));+#2645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2646 = ORIENTED_EDGE('',*,*,#2647,.F.);+#2647 = EDGE_CURVE('',#2648,#2615,#2650,.T.);+#2648 = VERTEX_POINT('',#2649);+#2649 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,0.));+#2650 = SURFACE_CURVE('',#2651,(#2655,#2662),.PCURVE_S1.);+#2651 = LINE('',#2652,#2653);+#2652 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,0.));+#2653 = VECTOR('',#2654,1.);+#2654 = DIRECTION('',(1.,1.297374918141E-12,0.));+#2655 = PCURVE('',#227,#2656);+#2656 = DEFINITIONAL_REPRESENTATION('',(#2657),#2661);+#2657 = LINE('',#2658,#2659);+#2658 = CARTESIAN_POINT('',(-1.675537960583,1.010692661492));+#2659 = VECTOR('',#2660,1.);+#2660 = DIRECTION('',(1.,1.297374918141E-12));+#2661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2662 = PCURVE('',#2663,#2668);+#2663 = PLANE('',#2664);+#2664 = AXIS2_PLACEMENT_3D('',#2665,#2666,#2667);+#2665 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+    9.314404469578E-02));+#2666 = DIRECTION('',(0.,-1.,0.));+#2667 = DIRECTION('',(1.,0.,0.));+#2668 = DEFINITIONAL_REPRESENTATION('',(#2669),#2673);+#2669 = LINE('',#2670,#2671);+#2670 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#2671 = VECTOR('',#2672,1.);+#2672 = DIRECTION('',(1.,0.));+#2673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2674 = ORIENTED_EDGE('',*,*,#2675,.F.);+#2675 = EDGE_CURVE('',#2676,#2648,#2678,.T.);+#2676 = VERTEX_POINT('',#2677);+#2677 = CARTESIAN_POINT('',(0.,3.295441613229,0.));+#2678 = SURFACE_CURVE('',#2679,(#2683,#2690),.PCURVE_S1.);+#2679 = LINE('',#2680,#2681);+#2680 = CARTESIAN_POINT('',(0.,3.295441613229,0.));+#2681 = VECTOR('',#2682,1.);+#2682 = DIRECTION('',(0.906183139956,-0.422885465415,0.));+#2683 = PCURVE('',#227,#2684);+#2684 = DEFINITIONAL_REPRESENTATION('',(#2685),#2689);+#2685 = LINE('',#2686,#2687);+#2686 = CARTESIAN_POINT('',(-1.75,1.045441613229));+#2687 = VECTOR('',#2688,1.);+#2688 = DIRECTION('',(0.906183139956,-0.422885465415));+#2689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2690 = PCURVE('',#2691,#2696);+#2691 = PLANE('',#2692);+#2692 = AXIS2_PLACEMENT_3D('',#2693,#2694,#2695);+#2693 = CARTESIAN_POINT('',(-5.379605796021E-04,3.295692661499,+    9.314404469578E-02));+#2694 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#2695 = DIRECTION('',(0.906183139956,-0.422885465415,0.));+#2696 = DEFINITIONAL_REPRESENTATION('',(#2697),#2701);+#2697 = LINE('',#2698,#2699);+#2698 = CARTESIAN_POINT('',(5.936554716971E-04,-9.314404469578E-02));+#2699 = VECTOR('',#2700,1.);+#2700 = DIRECTION('',(1.,0.));+#2701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2702 = ORIENTED_EDGE('',*,*,#2703,.F.);+#2703 = EDGE_CURVE('',#2704,#2676,#2706,.T.);+#2704 = VERTEX_POINT('',#2705);+#2705 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#2706 = SURFACE_CURVE('',#2707,(#2711,#2718),.PCURVE_S1.);+#2707 = LINE('',#2708,#2709);+#2708 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#2709 = VECTOR('',#2710,1.);+#2710 = DIRECTION('',(0.,1.,0.));+#2711 = PCURVE('',#227,#2712);+#2712 = DEFINITIONAL_REPRESENTATION('',(#2713),#2717);+#2713 = LINE('',#2714,#2715);+#2714 = CARTESIAN_POINT('',(-1.75,0.725943712833));+#2715 = VECTOR('',#2716,1.);+#2716 = DIRECTION('',(0.,1.));+#2717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2718 = PCURVE('',#140,#2719);+#2719 = DEFINITIONAL_REPRESENTATION('',(#2720),#2724);+#2720 = LINE('',#2721,#2722);+#2721 = CARTESIAN_POINT('',(1.524056287167,0.));+#2722 = VECTOR('',#2723,1.);+#2723 = DIRECTION('',(-1.,0.));+#2724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2725 = ORIENTED_EDGE('',*,*,#2726,.T.);+#2726 = EDGE_CURVE('',#2704,#2727,#2729,.T.);+#2727 = VERTEX_POINT('',#2728);+#2728 = CARTESIAN_POINT('',(7.446203941993E-02,3.010692661496,0.));+#2729 = SURFACE_CURVE('',#2730,(#2734,#2741),.PCURVE_S1.);+#2730 = LINE('',#2731,#2732);+#2731 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#2732 = VECTOR('',#2733,1.);+#2733 = DIRECTION('',(0.906183154294,0.422885434691,0.));+#2734 = PCURVE('',#227,#2735);+#2735 = DEFINITIONAL_REPRESENTATION('',(#2736),#2740);+#2736 = LINE('',#2737,#2738);+#2737 = CARTESIAN_POINT('',(-1.75,0.725943712833));+#2738 = VECTOR('',#2739,1.);+#2739 = DIRECTION('',(0.906183154294,0.422885434691));+#2740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2741 = PCURVE('',#2742,#2747);+#2742 = PLANE('',#2743);+#2743 = AXIS2_PLACEMENT_3D('',#2744,#2745,#2746);+#2744 = CARTESIAN_POINT('',(-5.379672007246E-04,2.975692661494,+    9.314404469578E-02));+#2745 = DIRECTION('',(-0.422885434691,0.906183154294,0.));+#2746 = DIRECTION('',(0.906183154294,0.422885434691,0.));+#2747 = DEFINITIONAL_REPRESENTATION('',(#2748),#2752);+#2748 = LINE('',#2749,#2750);+#2749 = CARTESIAN_POINT('',(5.936627694821E-04,9.314404469578E-02));+#2750 = VECTOR('',#2751,1.);+#2751 = DIRECTION('',(1.,0.));+#2752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2753 = ORIENTED_EDGE('',*,*,#2754,.F.);+#2754 = EDGE_CURVE('',#2755,#2727,#2757,.T.);+#2755 = VERTEX_POINT('',#2756);+#2756 = CARTESIAN_POINT('',(0.774462032822,3.010692661495,0.));+#2757 = SURFACE_CURVE('',#2758,(#2762,#2769),.PCURVE_S1.);+#2758 = LINE('',#2759,#2760);+#2759 = CARTESIAN_POINT('',(0.774462032827,3.010692661495,0.));+#2760 = VECTOR('',#2761,1.);+#2761 = DIRECTION('',(-1.,4.865948959471E-13,0.));+#2762 = PCURVE('',#227,#2763);+#2763 = DEFINITIONAL_REPRESENTATION('',(#2764),#2768);+#2764 = LINE('',#2765,#2766);+#2765 = CARTESIAN_POINT('',(-0.975537967173,0.760692661495));+#2766 = VECTOR('',#2767,1.);+#2767 = DIRECTION('',(-1.,4.865948959471E-13));+#2768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2769 = PCURVE('',#2770,#2775);+#2770 = PLANE('',#2771);+#2771 = AXIS2_PLACEMENT_3D('',#2772,#2773,#2774);+#2772 = CARTESIAN_POINT('',(0.149462039396,3.010692661496,+    9.314404469578E-02));+#2773 = DIRECTION('',(0.,1.,0.));+#2774 = DIRECTION('',(-1.,0.,0.));+#2775 = DEFINITIONAL_REPRESENTATION('',(#2776),#2780);+#2776 = LINE('',#2777,#2778);+#2777 = CARTESIAN_POINT('',(-0.624999993431,-9.314404469578E-02));+#2778 = VECTOR('',#2779,1.);+#2779 = DIRECTION('',(1.,0.));+#2780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2781 = ORIENTED_EDGE('',*,*,#2782,.T.);+#2782 = EDGE_CURVE('',#2755,#2783,#2785,.T.);+#2783 = VERTEX_POINT('',#2784);+#2784 = CARTESIAN_POINT('',(0.774462032865,2.760692661495,0.));+#2785 = SURFACE_CURVE('',#2786,(#2791,#2802),.PCURVE_S1.);+#2786 = CIRCLE('',#2787,0.125);+#2787 = AXIS2_PLACEMENT_3D('',#2788,#2789,#2790);+#2788 = CARTESIAN_POINT('',(0.77446203283,2.885692661495,0.));+#2789 = DIRECTION('',(0.,0.,-1.));+#2790 = DIRECTION('',(-6.199041280297E-11,1.,0.));+#2791 = PCURVE('',#227,#2792);+#2792 = DEFINITIONAL_REPRESENTATION('',(#2793),#2801);+#2793 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2794,#2795,#2796,#2797,+#2798,#2799,#2800),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2794 = CARTESIAN_POINT('',(-0.975537967178,0.760692661495));+#2795 = CARTESIAN_POINT('',(-0.759031616232,0.760692661508));+#2796 = CARTESIAN_POINT('',(-0.867284791693,0.573192661502));+#2797 = CARTESIAN_POINT('',(-0.975537967155,0.385692661495));+#2798 = CARTESIAN_POINT('',(-1.083791142639,0.573192661488));+#2799 = CARTESIAN_POINT('',(-1.192044318124,0.760692661482));+#2800 = CARTESIAN_POINT('',(-0.975537967178,0.760692661495));+#2801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2802 = PCURVE('',#2803,#2808);+#2803 = CYLINDRICAL_SURFACE('',#2804,0.125);+#2804 = AXIS2_PLACEMENT_3D('',#2805,#2806,#2807);+#2805 = CARTESIAN_POINT('',(0.77446203283,2.885692661495,+    9.314404469578E-02));+#2806 = DIRECTION('',(0.,0.,-1.));+#2807 = DIRECTION('',(0.,1.,0.));+#2808 = DEFINITIONAL_REPRESENTATION('',(#2809),#2813);+#2809 = LINE('',#2810,#2811);+#2810 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2811 = VECTOR('',#2812,1.);+#2812 = DIRECTION('',(1.,0.));+#2813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2814 = ORIENTED_EDGE('',*,*,#2815,.F.);+#2815 = EDGE_CURVE('',#2816,#2783,#2818,.T.);+#2816 = VERTEX_POINT('',#2817);+#2817 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,0.));+#2818 = SURFACE_CURVE('',#2819,(#2823,#2830),.PCURVE_S1.);+#2819 = LINE('',#2820,#2821);+#2820 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,0.));+#2821 = VECTOR('',#2822,1.);+#2822 = DIRECTION('',(1.,-2.220446070109E-12,0.));+#2823 = PCURVE('',#227,#2824);+#2824 = DEFINITIONAL_REPRESENTATION('',(#2825),#2829);+#2825 = LINE('',#2826,#2827);+#2826 = CARTESIAN_POINT('',(-1.675537960583,0.510692661499));+#2827 = VECTOR('',#2828,1.);+#2828 = DIRECTION('',(1.,-2.220446070109E-12));+#2829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2830 = PCURVE('',#2831,#2836);+#2831 = PLANE('',#2832);+#2832 = AXIS2_PLACEMENT_3D('',#2833,#2834,#2835);+#2833 = CARTESIAN_POINT('',(7.446203941749E-02,2.760692661499,+    9.314404469578E-02));+#2834 = DIRECTION('',(0.,-1.,0.));+#2835 = DIRECTION('',(1.,0.,0.));+#2836 = DEFINITIONAL_REPRESENTATION('',(#2837),#2841);+#2837 = LINE('',#2838,#2839);+#2838 = CARTESIAN_POINT('',(-9.992007221626E-15,-9.314404469578E-02));+#2839 = VECTOR('',#2840,1.);+#2840 = DIRECTION('',(1.,0.));+#2841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2842 = ORIENTED_EDGE('',*,*,#2843,.F.);+#2843 = EDGE_CURVE('',#2844,#2816,#2846,.T.);+#2844 = VERTEX_POINT('',#2845);+#2845 = CARTESIAN_POINT('',(0.,2.795441613227,0.));+#2846 = SURFACE_CURVE('',#2847,(#2851,#2858),.PCURVE_S1.);+#2847 = LINE('',#2848,#2849);+#2848 = CARTESIAN_POINT('',(0.,2.795441613227,0.));+#2849 = VECTOR('',#2850,1.);+#2850 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#2851 = PCURVE('',#227,#2852);+#2852 = DEFINITIONAL_REPRESENTATION('',(#2853),#2857);+#2853 = LINE('',#2854,#2855);+#2854 = CARTESIAN_POINT('',(-1.75,0.545441613227));+#2855 = VECTOR('',#2856,1.);+#2856 = DIRECTION('',(0.906183139998,-0.422885465325));+#2857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2858 = PCURVE('',#2859,#2864);+#2859 = PLANE('',#2860);+#2860 = AXIS2_PLACEMENT_3D('',#2861,#2862,#2863);+#2861 = CARTESIAN_POINT('',(-5.379605796028E-04,2.795692661497,+    9.314404469578E-02));+#2862 = DIRECTION('',(-0.422885465325,-0.906183139998,0.));+#2863 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#2864 = DEFINITIONAL_REPRESENTATION('',(#2865),#2869);+#2865 = LINE('',#2866,#2867);+#2866 = CARTESIAN_POINT('',(5.936554716977E-04,-9.314404469578E-02));+#2867 = VECTOR('',#2868,1.);+#2868 = DIRECTION('',(1.,0.));+#2869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2870 = ORIENTED_EDGE('',*,*,#2871,.F.);+#2871 = EDGE_CURVE('',#2872,#2844,#2874,.T.);+#2872 = VERTEX_POINT('',#2873);+#2873 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#2874 = SURFACE_CURVE('',#2875,(#2879,#2886),.PCURVE_S1.);+#2875 = LINE('',#2876,#2877);+#2876 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#2877 = VECTOR('',#2878,1.);+#2878 = DIRECTION('',(0.,1.,0.));+#2879 = PCURVE('',#227,#2880);+#2880 = DEFINITIONAL_REPRESENTATION('',(#2881),#2885);+#2881 = LINE('',#2882,#2883);+#2882 = CARTESIAN_POINT('',(-1.75,-0.224056290231));+#2883 = VECTOR('',#2884,1.);+#2884 = DIRECTION('',(0.,1.));+#2885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2886 = PCURVE('',#140,#2887);+#2887 = DEFINITIONAL_REPRESENTATION('',(#2888),#2892);+#2888 = LINE('',#2889,#2890);+#2889 = CARTESIAN_POINT('',(2.474056290231,0.));+#2890 = VECTOR('',#2891,1.);+#2891 = DIRECTION('',(-1.,0.));+#2892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2893 = ORIENTED_EDGE('',*,*,#2894,.T.);+#2894 = EDGE_CURVE('',#2872,#2895,#2897,.T.);+#2895 = VERTEX_POINT('',#2896);+#2896 = CARTESIAN_POINT('',(7.446203942601E-02,2.060692661502,0.));+#2897 = SURFACE_CURVE('',#2898,(#2902,#2909),.PCURVE_S1.);+#2898 = LINE('',#2899,#2900);+#2899 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#2900 = VECTOR('',#2901,1.);+#2901 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#2902 = PCURVE('',#227,#2903);+#2903 = DEFINITIONAL_REPRESENTATION('',(#2904),#2908);+#2904 = LINE('',#2905,#2906);+#2905 = CARTESIAN_POINT('',(-1.75,-0.224056290231));+#2906 = VECTOR('',#2907,1.);+#2907 = DIRECTION('',(0.90618313999,0.422885465342));+#2908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2909 = PCURVE('',#2910,#2915);+#2910 = PLANE('',#2911);+#2911 = AXIS2_PLACEMENT_3D('',#2912,#2913,#2914);+#2912 = CARTESIAN_POINT('',(-5.379605796039E-04,2.025692661499,+    9.314404469578E-02));+#2913 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#2914 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#2915 = DEFINITIONAL_REPRESENTATION('',(#2916),#2920);+#2916 = LINE('',#2917,#2918);+#2917 = CARTESIAN_POINT('',(5.936554716987E-04,9.314404469578E-02));+#2918 = VECTOR('',#2919,1.);+#2919 = DIRECTION('',(1.,0.));+#2920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2921 = ORIENTED_EDGE('',*,*,#2922,.F.);+#2922 = EDGE_CURVE('',#2923,#2895,#2925,.T.);+#2923 = VERTEX_POINT('',#2924);+#2924 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#2925 = SURFACE_CURVE('',#2926,(#2930,#2937),.PCURVE_S1.);+#2926 = LINE('',#2927,#2928);+#2927 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#2928 = VECTOR('',#2929,1.);+#2929 = DIRECTION('',(-1.,0.,0.));+#2930 = PCURVE('',#227,#2931);+#2931 = DEFINITIONAL_REPRESENTATION('',(#2932),#2936);+#2932 = LINE('',#2933,#2934);+#2933 = CARTESIAN_POINT('',(-1.550537960575,-0.189307338498));+#2934 = VECTOR('',#2935,1.);+#2935 = DIRECTION('',(-1.,0.));+#2936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2937 = PCURVE('',#2938,#2943);+#2938 = PLANE('',#2939);+#2939 = AXIS2_PLACEMENT_3D('',#2940,#2941,#2942);+#2940 = CARTESIAN_POINT('',(0.149462046017,2.060692661502,+    9.314404469578E-02));+#2941 = DIRECTION('',(0.,1.,0.));+#2942 = DIRECTION('',(-1.,0.,0.));+#2943 = DEFINITIONAL_REPRESENTATION('',(#2944),#2948);+#2944 = LINE('',#2945,#2946);+#2945 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#2946 = VECTOR('',#2947,1.);+#2947 = DIRECTION('',(1.,0.));+#2948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2949 = ORIENTED_EDGE('',*,*,#2950,.T.);+#2950 = EDGE_CURVE('',#2923,#2951,#2953,.T.);+#2951 = VERTEX_POINT('',#2952);+#2952 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,0.));+#2953 = SURFACE_CURVE('',#2954,(#2958,#2965),.PCURVE_S1.);+#2954 = LINE('',#2955,#2956);+#2955 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#2956 = VECTOR('',#2957,1.);+#2957 = DIRECTION('',(2.026727863384E-04,0.999999979462,0.));+#2958 = PCURVE('',#227,#2959);+#2959 = DEFINITIONAL_REPRESENTATION('',(#2960),#2964);+#2960 = LINE('',#2961,#2962);+#2961 = CARTESIAN_POINT('',(-1.550537960575,-0.189307338498));+#2962 = VECTOR('',#2963,1.);+#2963 = DIRECTION('',(2.026727863384E-04,0.999999979462));+#2964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2965 = PCURVE('',#2966,#2971);+#2966 = PLANE('',#2967);+#2967 = AXIS2_PLACEMENT_3D('',#2968,#2969,#2970);+#2968 = CARTESIAN_POINT('',(0.199462039425,2.060692661499,+    9.314404469578E-02));+#2969 = DIRECTION('',(-0.999999979462,2.026727863386E-04,0.));+#2970 = DIRECTION('',(2.026727863386E-04,0.999999979462,0.));+#2971 = DEFINITIONAL_REPRESENTATION('',(#2972),#2976);+#2972 = LINE('',#2973,#2974);+#2973 = CARTESIAN_POINT('',(2.999822674683E-12,9.314404469578E-02));+#2974 = VECTOR('',#2975,1.);+#2975 = DIRECTION('',(1.,0.));+#2976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2977 = ORIENTED_EDGE('',*,*,#2978,.T.);+#2978 = EDGE_CURVE('',#2951,#2979,#2981,.T.);+#2979 = VERTEX_POINT('',#2980);+#2980 = CARTESIAN_POINT('',(1.199462039275,2.260599510107,0.));+#2981 = SURFACE_CURVE('',#2982,(#2986,#2993),.PCURVE_S1.);+#2982 = LINE('',#2983,#2984);+#2983 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,0.));+#2984 = VECTOR('',#2985,1.);+#2985 = DIRECTION('',(1.,1.178527285084E-11,0.));+#2986 = PCURVE('',#227,#2987);+#2987 = DEFINITIONAL_REPRESENTATION('',(#2988),#2992);+#2988 = LINE('',#2989,#2990);+#2989 = CARTESIAN_POINT('',(-1.550497444896,1.0599510107E-02));+#2990 = VECTOR('',#2991,1.);+#2991 = DIRECTION('',(1.,1.178527285084E-11));+#2992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2993 = PCURVE('',#2994,#2999);+#2994 = PLANE('',#2995);+#2995 = AXIS2_PLACEMENT_3D('',#2996,#2997,#2998);+#2996 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,+    9.314404469578E-02));+#2997 = DIRECTION('',(-1.762074787874E-11,1.,0.));+#2998 = DIRECTION('',(1.,1.762074787874E-11,0.));+#2999 = DEFINITIONAL_REPRESENTATION('',(#3000),#3004);+#3000 = LINE('',#3001,#3002);+#3001 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3002 = VECTOR('',#3003,1.);+#3003 = DIRECTION('',(1.,0.));+#3004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3005 = ORIENTED_EDGE('',*,*,#3006,.T.);+#3006 = EDGE_CURVE('',#2979,#3007,#3009,.T.);+#3007 = VERTEX_POINT('',#3008);+#3008 = CARTESIAN_POINT('',(1.299462039425,2.16059951006,0.));+#3009 = SURFACE_CURVE('',#3010,(#3015,#3026),.PCURVE_S1.);+#3010 = CIRCLE('',#3011,0.100000000003);+#3011 = AXIS2_PLACEMENT_3D('',#3012,#3013,#3014);+#3012 = CARTESIAN_POINT('',(1.19946203941,2.160599510105,0.));+#3013 = DIRECTION('',(0.,0.,-1.));+#3014 = DIRECTION('',(-1.347362221754E-09,1.,0.));+#3015 = PCURVE('',#227,#3016);+#3016 = DEFINITIONAL_REPRESENTATION('',(#3017),#3025);+#3017 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3018,#3019,#3020,#3021,+#3022,#3023,#3024),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3018 = CARTESIAN_POINT('',(-0.550537960725,1.0599510108E-02));+#3019 = CARTESIAN_POINT('',(-0.377332879963,1.059951034137E-02));+#3020 = CARTESIAN_POINT('',(-0.463935420142,-0.13940048978));+#3021 = CARTESIAN_POINT('',(-0.550537960321,-0.289400489901));+#3022 = CARTESIAN_POINT('',(-0.637140500904,-0.139400490013));+#3023 = CARTESIAN_POINT('',(-0.723743041487,1.059950987463E-02));+#3024 = CARTESIAN_POINT('',(-0.550537960725,1.0599510108E-02));+#3025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3026 = PCURVE('',#3027,#3032);+#3027 = CYLINDRICAL_SURFACE('',#3028,0.100000000003);+#3028 = AXIS2_PLACEMENT_3D('',#3029,#3030,#3031);+#3029 = CARTESIAN_POINT('',(1.19946203941,2.160599510105,+    9.314404469578E-02));+#3030 = DIRECTION('',(0.,0.,-1.));+#3031 = DIRECTION('',(0.,1.,0.));+#3032 = DEFINITIONAL_REPRESENTATION('',(#3033),#3037);+#3033 = LINE('',#3034,#3035);+#3034 = CARTESIAN_POINT('',(-1.347362221793E-09,9.314404469578E-02));+#3035 = VECTOR('',#3036,1.);+#3036 = DIRECTION('',(1.,0.));+#3037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3038 = ORIENTED_EDGE('',*,*,#3039,.T.);+#3039 = EDGE_CURVE('',#3007,#3040,#3042,.T.);+#3040 = VERTEX_POINT('',#3041);+#3041 = CARTESIAN_POINT('',(1.299462039438,0.310692661498,0.));+#3042 = SURFACE_CURVE('',#3043,(#3047,#3054),.PCURVE_S1.);+#3043 = LINE('',#3044,#3045);+#3044 = CARTESIAN_POINT('',(1.299462039425,2.16059951006,0.));+#3045 = VECTOR('',#3046,1.);+#3046 = DIRECTION('',(4.464401568199E-12,-1.,0.));+#3047 = PCURVE('',#227,#3048);+#3048 = DEFINITIONAL_REPRESENTATION('',(#3049),#3053);+#3049 = LINE('',#3050,#3051);+#3050 = CARTESIAN_POINT('',(-0.450537960575,-8.940048994E-02));+#3051 = VECTOR('',#3052,1.);+#3052 = DIRECTION('',(4.464401568199E-12,-1.));+#3053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3054 = PCURVE('',#3055,#3060);+#3055 = PLANE('',#3056);+#3056 = AXIS2_PLACEMENT_3D('',#3057,#3058,#3059);+#3057 = CARTESIAN_POINT('',(1.299462039431,2.160599510108,+    9.314404469578E-02));+#3058 = DIRECTION('',(1.,0.,0.));+#3059 = DIRECTION('',(0.,-1.,0.));+#3060 = DEFINITIONAL_REPRESENTATION('',(#3061),#3065);+#3061 = LINE('',#3062,#3063);+#3062 = CARTESIAN_POINT('',(4.800027042506E-11,9.314404469578E-02));+#3063 = VECTOR('',#3064,1.);+#3064 = DIRECTION('',(1.,0.));+#3065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3066 = ORIENTED_EDGE('',*,*,#3067,.T.);+#3067 = EDGE_CURVE('',#3040,#3068,#3070,.T.);+#3068 = VERTEX_POINT('',#3069);+#3069 = CARTESIAN_POINT('',(1.199462039453,0.210692661561,0.));+#3070 = SURFACE_CURVE('',#3071,(#3076,#3087),.PCURVE_S1.);+#3071 = CIRCLE('',#3072,9.999999999127E-02);+#3072 = AXIS2_PLACEMENT_3D('',#3073,#3074,#3075);+#3073 = CARTESIAN_POINT('',(1.199462039447,0.310692661553,0.));+#3074 = DIRECTION('',(0.,0.,-1.));+#3075 = DIRECTION('',(1.,-5.521305635397E-10,0.));+#3076 = PCURVE('',#227,#3077);+#3077 = DEFINITIONAL_REPRESENTATION('',(#3078),#3086);+#3078 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3079,#3080,#3081,#3082,+#3083,#3084,#3085),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3079 = CARTESIAN_POINT('',(-0.450537960562,-1.939307338502));+#3080 = CARTESIAN_POINT('',(-0.450537960657,-2.112512419244));+#3081 = CARTESIAN_POINT('',(-0.600537960596,-2.02590987879));+#3082 = CARTESIAN_POINT('',(-0.750537960536,-1.939307338337));+#3083 = CARTESIAN_POINT('',(-0.600537960501,-1.852704798049));+#3084 = CARTESIAN_POINT('',(-0.450537960466,-1.76610225776));+#3085 = CARTESIAN_POINT('',(-0.450537960562,-1.939307338502));+#3086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3087 = PCURVE('',#3088,#3093);+#3088 = CYLINDRICAL_SURFACE('',#3089,9.999999999127E-02);+#3089 = AXIS2_PLACEMENT_3D('',#3090,#3091,#3092);+#3090 = CARTESIAN_POINT('',(1.199462039447,0.310692661553,+    9.314404469578E-02));+#3091 = DIRECTION('',(0.,0.,-1.));+#3092 = DIRECTION('',(1.,1.847268519002E-11,0.));+#3093 = DEFINITIONAL_REPRESENTATION('',(#3094),#3098);+#3094 = LINE('',#3095,#3096);+#3095 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3096 = VECTOR('',#3097,1.);+#3097 = DIRECTION('',(1.,0.));+#3098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3099 = ORIENTED_EDGE('',*,*,#3100,.T.);+#3100 = EDGE_CURVE('',#3068,#3101,#3103,.T.);+#3101 = VERTEX_POINT('',#3102);+#3102 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,0.));+#3103 = SURFACE_CURVE('',#3104,(#3108,#3115),.PCURVE_S1.);+#3104 = LINE('',#3105,#3106);+#3105 = CARTESIAN_POINT('',(1.199462039453,0.210692661561,0.));+#3106 = VECTOR('',#3107,1.);+#3107 = DIRECTION('',(-1.,-6.308550903711E-11,0.));+#3108 = PCURVE('',#227,#3109);+#3109 = DEFINITIONAL_REPRESENTATION('',(#3110),#3114);+#3110 = LINE('',#3111,#3112);+#3111 = CARTESIAN_POINT('',(-0.550537960547,-2.039307338439));+#3112 = VECTOR('',#3113,1.);+#3113 = DIRECTION('',(-1.,-6.308550903711E-11));+#3114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3115 = PCURVE('',#3116,#3121);+#3116 = PLANE('',#3117);+#3117 = AXIS2_PLACEMENT_3D('',#3118,#3119,#3120);+#3118 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+    9.314404469578E-02));+#3119 = DIRECTION('',(6.309476899257E-11,-1.,0.));+#3120 = DIRECTION('',(-1.,-6.309476899257E-11,0.));+#3121 = DEFINITIONAL_REPRESENTATION('',(#3122),#3126);+#3122 = LINE('',#3123,#3124);+#3123 = CARTESIAN_POINT('',(-2.500000206851E-11,9.314404469578E-02));+#3124 = VECTOR('',#3125,1.);+#3125 = DIRECTION('',(1.,0.));+#3126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3127 = ORIENTED_EDGE('',*,*,#3128,.T.);+#3128 = EDGE_CURVE('',#3101,#3129,#3131,.T.);+#3129 = VERTEX_POINT('',#3130);+#3130 = CARTESIAN_POINT('',(0.199462039425,0.310692661501,0.));+#3131 = SURFACE_CURVE('',#3132,(#3136,#3143),.PCURVE_S1.);+#3132 = LINE('',#3133,#3134);+#3133 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,0.));+#3134 = VECTOR('',#3135,1.);+#3135 = DIRECTION('',(0.,1.,0.));+#3136 = PCURVE('',#227,#3137);+#3137 = DEFINITIONAL_REPRESENTATION('',(#3138),#3142);+#3138 = LINE('',#3139,#3140);+#3139 = CARTESIAN_POINT('',(-1.550537960575,-2.039307338502));+#3140 = VECTOR('',#3141,1.);+#3141 = DIRECTION('',(0.,1.));+#3142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3143 = PCURVE('',#3144,#3149);+#3144 = PLANE('',#3145);+#3145 = AXIS2_PLACEMENT_3D('',#3146,#3147,#3148);+#3146 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,+    9.314404469578E-02));+#3147 = DIRECTION('',(-1.,0.,0.));+#3148 = DIRECTION('',(0.,1.,0.));+#3149 = DEFINITIONAL_REPRESENTATION('',(#3150),#3154);+#3150 = LINE('',#3151,#3152);+#3151 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3152 = VECTOR('',#3153,1.);+#3153 = DIRECTION('',(1.,0.));+#3154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3155 = ORIENTED_EDGE('',*,*,#3156,.F.);+#3156 = EDGE_CURVE('',#3157,#3129,#3159,.T.);+#3157 = VERTEX_POINT('',#3158);+#3158 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,0.));+#3159 = SURFACE_CURVE('',#3160,(#3164,#3171),.PCURVE_S1.);+#3160 = LINE('',#3161,#3162);+#3161 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,0.));+#3162 = VECTOR('',#3163,1.);+#3163 = DIRECTION('',(1.,0.,0.));+#3164 = PCURVE('',#227,#3165);+#3165 = DEFINITIONAL_REPRESENTATION('',(#3166),#3170);+#3166 = LINE('',#3167,#3168);+#3167 = CARTESIAN_POINT('',(-1.675537960586,-1.939307338499));+#3168 = VECTOR('',#3169,1.);+#3169 = DIRECTION('',(1.,0.));+#3170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3171 = PCURVE('',#3172,#3177);+#3172 = PLANE('',#3173);+#3173 = AXIS2_PLACEMENT_3D('',#3174,#3175,#3176);+#3174 = CARTESIAN_POINT('',(7.446204602041E-02,0.310692661501,+    9.314404469578E-02));+#3175 = DIRECTION('',(0.,-1.,0.));+#3176 = DIRECTION('',(1.,0.,0.));+#3177 = DEFINITIONAL_REPRESENTATION('',(#3178),#3182);+#3178 = LINE('',#3179,#3180);+#3179 = CARTESIAN_POINT('',(-6.606579991408E-09,-9.314404469578E-02));+#3180 = VECTOR('',#3181,1.);+#3181 = DIRECTION('',(1.,0.));+#3182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3183 = ORIENTED_EDGE('',*,*,#3184,.T.);+#3184 = EDGE_CURVE('',#3157,#3185,#3187,.T.);+#3185 = VERTEX_POINT('',#3186);+#3186 = CARTESIAN_POINT('',(0.,0.345441613228,0.));+#3187 = SURFACE_CURVE('',#3188,(#3192,#3199),.PCURVE_S1.);+#3188 = LINE('',#3189,#3190);+#3189 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,0.));+#3190 = VECTOR('',#3191,1.);+#3191 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#3192 = PCURVE('',#227,#3193);+#3193 = DEFINITIONAL_REPRESENTATION('',(#3194),#3198);+#3194 = LINE('',#3195,#3196);+#3195 = CARTESIAN_POINT('',(-1.675537960586,-1.939307338499));+#3196 = VECTOR('',#3197,1.);+#3197 = DIRECTION('',(-0.90618313999,0.422885465342));+#3198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3199 = PCURVE('',#3200,#3205);+#3200 = PLANE('',#3201);+#3201 = AXIS2_PLACEMENT_3D('',#3202,#3203,#3204);+#3202 = CARTESIAN_POINT('',(7.446203941748E-02,0.310692661499,+    9.314404469578E-02));+#3203 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#3204 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#3205 = DEFINITIONAL_REPRESENTATION('',(#3206),#3210);+#3206 = LINE('',#3207,#3208);+#3207 = CARTESIAN_POINT('',(4.153331351416E-12,9.314404469578E-02));+#3208 = VECTOR('',#3209,1.);+#3209 = DIRECTION('',(1.,0.));+#3210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3211 = ORIENTED_EDGE('',*,*,#3212,.F.);+#3212 = EDGE_CURVE('',#212,#3185,#3213,.T.);+#3213 = SURFACE_CURVE('',#3214,(#3218,#3225),.PCURVE_S1.);+#3214 = LINE('',#3215,#3216);+#3215 = CARTESIAN_POINT('',(0.,0.,0.));+#3216 = VECTOR('',#3217,1.);+#3217 = DIRECTION('',(0.,1.,0.));+#3218 = PCURVE('',#227,#3219);+#3219 = DEFINITIONAL_REPRESENTATION('',(#3220),#3224);+#3220 = LINE('',#3221,#3222);+#3221 = CARTESIAN_POINT('',(-1.75,-2.25));+#3222 = VECTOR('',#3223,1.);+#3223 = DIRECTION('',(0.,1.));+#3224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3225 = PCURVE('',#140,#3226);+#3226 = DEFINITIONAL_REPRESENTATION('',(#3227),#3231);+#3227 = LINE('',#3228,#3229);+#3228 = CARTESIAN_POINT('',(4.5,0.));+#3229 = VECTOR('',#3230,1.);+#3230 = DIRECTION('',(-1.,0.));+#3231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3232 = ORIENTED_EDGE('',*,*,#209,.F.);+#3233 = ORIENTED_EDGE('',*,*,#3234,.F.);+#3234 = EDGE_CURVE('',#3235,#210,#3237,.T.);+#3235 = VERTEX_POINT('',#3236);+#3236 = CARTESIAN_POINT('',(3.5,0.345943712857,0.));+#3237 = SURFACE_CURVE('',#3238,(#3242,#3249),.PCURVE_S1.);+#3238 = LINE('',#3239,#3240);+#3239 = CARTESIAN_POINT('',(3.5,0.345943712857,0.));+#3240 = VECTOR('',#3241,1.);+#3241 = DIRECTION('',(0.,-1.,0.));+#3242 = PCURVE('',#227,#3243);+#3243 = DEFINITIONAL_REPRESENTATION('',(#3244),#3248);+#3244 = LINE('',#3245,#3246);+#3245 = CARTESIAN_POINT('',(1.75,-1.904056287143));+#3246 = VECTOR('',#3247,1.);+#3247 = DIRECTION('',(0.,-1.));+#3248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3249 = PCURVE('',#194,#3250);+#3250 = DEFINITIONAL_REPRESENTATION('',(#3251),#3255);+#3251 = LINE('',#3252,#3253);+#3252 = CARTESIAN_POINT('',(0.345943712857,0.));+#3253 = VECTOR('',#3254,1.);+#3254 = DIRECTION('',(-1.,0.));+#3255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3256 = ORIENTED_EDGE('',*,*,#3257,.F.);+#3257 = EDGE_CURVE('',#3258,#3235,#3260,.T.);+#3258 = VERTEX_POINT('',#3259);+#3259 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,0.));+#3260 = SURFACE_CURVE('',#3261,(#3265,#3272),.PCURVE_S1.);+#3261 = LINE('',#3262,#3263);+#3262 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,0.));+#3263 = VECTOR('',#3264,1.);+#3264 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3265 = PCURVE('',#227,#3266);+#3266 = DEFINITIONAL_REPRESENTATION('',(#3267),#3271);+#3267 = LINE('',#3268,#3269);+#3268 = CARTESIAN_POINT('',(1.674462032806,-1.939307338499));+#3269 = VECTOR('',#3270,1.);+#3270 = DIRECTION('',(0.906183139998,0.422885465325));+#3271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3272 = PCURVE('',#3273,#3278);+#3273 = PLANE('',#3274);+#3274 = AXIS2_PLACEMENT_3D('',#3275,#3276,#3277);+#3275 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,+    9.314404469578E-02));+#3276 = DIRECTION('',(0.422885465325,-0.906183139998,0.));+#3277 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3278 = DEFINITIONAL_REPRESENTATION('',(#3279),#3283);+#3279 = LINE('',#3280,#3281);+#3280 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#3281 = VECTOR('',#3282,1.);+#3282 = DIRECTION('',(1.,0.));+#3283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3284 = ORIENTED_EDGE('',*,*,#3285,.F.);+#3285 = EDGE_CURVE('',#3286,#3258,#3288,.T.);+#3286 = VERTEX_POINT('',#3287);+#3287 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#3288 = SURFACE_CURVE('',#3289,(#3293,#3300),.PCURVE_S1.);+#3289 = LINE('',#3290,#3291);+#3290 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#3291 = VECTOR('',#3292,1.);+#3292 = DIRECTION('',(1.,0.,0.));+#3293 = PCURVE('',#227,#3294);+#3294 = DEFINITIONAL_REPRESENTATION('',(#3295),#3299);+#3295 = LINE('',#3296,#3297);+#3296 = CARTESIAN_POINT('',(1.54946203942,-1.939307338499));+#3297 = VECTOR('',#3298,1.);+#3298 = DIRECTION('',(1.,0.));+#3299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3300 = PCURVE('',#3301,#3306);+#3301 = PLANE('',#3302);+#3302 = AXIS2_PLACEMENT_3D('',#3303,#3304,#3305);+#3303 = CARTESIAN_POINT('',(3.349462032809,0.310692661501,+    9.314404469578E-02));+#3304 = DIRECTION('',(0.,-1.,0.));+#3305 = DIRECTION('',(1.,0.,0.));+#3306 = DEFINITIONAL_REPRESENTATION('',(#3307),#3311);+#3307 = LINE('',#3308,#3309);+#3308 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#3309 = VECTOR('',#3310,1.);+#3310 = DIRECTION('',(1.,0.));+#3311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3312 = ORIENTED_EDGE('',*,*,#3313,.T.);+#3313 = EDGE_CURVE('',#3286,#3314,#3316,.T.);+#3314 = VERTEX_POINT('',#3315);+#3315 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,0.));+#3316 = SURFACE_CURVE('',#3317,(#3321,#3328),.PCURVE_S1.);+#3317 = LINE('',#3318,#3319);+#3318 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#3319 = VECTOR('',#3320,1.);+#3320 = DIRECTION('',(0.,-1.,0.));+#3321 = PCURVE('',#227,#3322);+#3322 = DEFINITIONAL_REPRESENTATION('',(#3323),#3327);+#3323 = LINE('',#3324,#3325);+#3324 = CARTESIAN_POINT('',(1.54946203942,-1.939307338499));+#3325 = VECTOR('',#3326,1.);+#3326 = DIRECTION('',(0.,-1.));+#3327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3328 = PCURVE('',#3329,#3334);+#3329 = PLANE('',#3330);+#3330 = AXIS2_PLACEMENT_3D('',#3331,#3332,#3333);+#3331 = CARTESIAN_POINT('',(3.29946203942,0.310692661498,+    9.314404469578E-02));+#3332 = DIRECTION('',(1.,0.,0.));+#3333 = DIRECTION('',(0.,-1.,0.));+#3334 = DEFINITIONAL_REPRESENTATION('',(#3335),#3339);+#3335 = LINE('',#3336,#3337);+#3336 = CARTESIAN_POINT('',(-2.999989145991E-12,9.314404469578E-02));+#3337 = VECTOR('',#3338,1.);+#3338 = DIRECTION('',(1.,0.));+#3339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3340 = ORIENTED_EDGE('',*,*,#3341,.T.);+#3341 = EDGE_CURVE('',#3314,#3342,#3344,.T.);+#3342 = VERTEX_POINT('',#3343);+#3343 = CARTESIAN_POINT('',(2.299462039494,0.210692661562,0.));+#3344 = SURFACE_CURVE('',#3345,(#3349,#3356),.PCURVE_S1.);+#3345 = LINE('',#3346,#3347);+#3346 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,0.));+#3347 = VECTOR('',#3348,1.);+#3348 = DIRECTION('',(-1.,5.593539520559E-11,0.));+#3349 = PCURVE('',#227,#3350);+#3350 = DEFINITIONAL_REPRESENTATION('',(#3351),#3355);+#3351 = LINE('',#3352,#3353);+#3352 = CARTESIAN_POINT('',(1.54946203942,-2.039307338502));+#3353 = VECTOR('',#3354,1.);+#3354 = DIRECTION('',(-1.,5.593539520559E-11));+#3355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3356 = PCURVE('',#3357,#3362);+#3357 = PLANE('',#3358);+#3358 = AXIS2_PLACEMENT_3D('',#3359,#3360,#3361);+#3359 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,+    9.314404469578E-02));+#3360 = DIRECTION('',(-5.229737129445E-11,-1.,0.));+#3361 = DIRECTION('',(-1.,5.229737129445E-11,0.));+#3362 = DEFINITIONAL_REPRESENTATION('',(#3363),#3367);+#3363 = LINE('',#3364,#3365);+#3364 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3365 = VECTOR('',#3366,1.);+#3366 = DIRECTION('',(1.,0.));+#3367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3368 = ORIENTED_EDGE('',*,*,#3369,.T.);+#3369 = EDGE_CURVE('',#3342,#3370,#3372,.T.);+#3370 = VERTEX_POINT('',#3371);+#3371 = CARTESIAN_POINT('',(2.199462039417,0.310692661581,0.));+#3372 = SURFACE_CURVE('',#3373,(#3378,#3389),.PCURVE_S1.);+#3373 = CIRCLE('',#3374,9.999999999127E-02);+#3374 = AXIS2_PLACEMENT_3D('',#3375,#3376,#3377);+#3375 = CARTESIAN_POINT('',(2.299462039416,0.310692661553,0.));+#3376 = DIRECTION('',(0.,0.,-1.));+#3377 = DIRECTION('',(7.766987054193E-10,-1.,0.));+#3378 = PCURVE('',#227,#3379);+#3379 = DEFINITIONAL_REPRESENTATION('',(#3380),#3388);+#3380 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3381,#3382,#3383,#3384,+#3385,#3386,#3387),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3381 = CARTESIAN_POINT('',(0.549462039494,-2.039307338438));+#3382 = CARTESIAN_POINT('',(0.376256958752,-2.039307338573));+#3383 = CARTESIAN_POINT('',(0.462859499006,-1.889307338519));+#3384 = CARTESIAN_POINT('',(0.549462039261,-1.739307338464));+#3385 = CARTESIAN_POINT('',(0.636064579748,-1.889307338384));+#3386 = CARTESIAN_POINT('',(0.722667120235,-2.039307338304));+#3387 = CARTESIAN_POINT('',(0.549462039494,-2.039307338438));+#3388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3389 = PCURVE('',#3390,#3395);+#3390 = CYLINDRICAL_SURFACE('',#3391,9.999999999127E-02);+#3391 = AXIS2_PLACEMENT_3D('',#3392,#3393,#3394);+#3392 = CARTESIAN_POINT('',(2.299462039416,0.310692661553,+    9.314404469578E-02));+#3393 = DIRECTION('',(0.,0.,-1.));+#3394 = DIRECTION('',(0.,1.,0.));+#3395 = DEFINITIONAL_REPRESENTATION('',(#3396),#3400);+#3396 = LINE('',#3397,#3398);+#3397 = CARTESIAN_POINT('',(3.141592652813,9.314404469578E-02));+#3398 = VECTOR('',#3399,1.);+#3399 = DIRECTION('',(1.,0.));+#3400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3401 = ORIENTED_EDGE('',*,*,#3402,.T.);+#3402 = EDGE_CURVE('',#3370,#3403,#3405,.T.);+#3403 = VERTEX_POINT('',#3404);+#3404 = CARTESIAN_POINT('',(2.199462039413,2.16059951011,0.));+#3405 = SURFACE_CURVE('',#3406,(#3410,#3417),.PCURVE_S1.);+#3406 = LINE('',#3407,#3408);+#3407 = CARTESIAN_POINT('',(2.199462039417,0.310692661581,0.));+#3408 = VECTOR('',#3409,1.);+#3409 = DIRECTION('',(-2.088044568489E-12,1.,0.));+#3410 = PCURVE('',#227,#3411);+#3411 = DEFINITIONAL_REPRESENTATION('',(#3412),#3416);+#3412 = LINE('',#3413,#3414);+#3413 = CARTESIAN_POINT('',(0.449462039417,-1.939307338419));+#3414 = VECTOR('',#3415,1.);+#3415 = DIRECTION('',(-2.088044568489E-12,1.));+#3416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3417 = PCURVE('',#3418,#3423);+#3418 = PLANE('',#3419);+#3419 = AXIS2_PLACEMENT_3D('',#3420,#3421,#3422);+#3420 = CARTESIAN_POINT('',(2.199462039414,0.310692661555,+    9.314404469578E-02));+#3421 = DIRECTION('',(-1.,0.,0.));+#3422 = DIRECTION('',(0.,1.,0.));+#3423 = DEFINITIONAL_REPRESENTATION('',(#3424),#3428);+#3424 = LINE('',#3425,#3426);+#3425 = CARTESIAN_POINT('',(2.599997994679E-11,9.314404469578E-02));+#3426 = VECTOR('',#3427,1.);+#3427 = DIRECTION('',(1.,0.));+#3428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3429 = ORIENTED_EDGE('',*,*,#3430,.T.);+#3430 = EDGE_CURVE('',#3403,#3431,#3433,.T.);+#3431 = VERTEX_POINT('',#3432);+#3432 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,0.));+#3433 = SURFACE_CURVE('',#3434,(#3439,#3450),.PCURVE_S1.);+#3434 = CIRCLE('',#3435,0.100000000003);+#3435 = AXIS2_PLACEMENT_3D('',#3436,#3437,#3438);+#3436 = CARTESIAN_POINT('',(2.299462039416,2.160599510105,0.));+#3437 = DIRECTION('',(0.,0.,-1.));+#3438 = DIRECTION('',(-1.,5.126565838362E-11,0.));+#3439 = PCURVE('',#227,#3440);+#3440 = DEFINITIONAL_REPRESENTATION('',(#3441),#3449);+#3441 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3442,#3443,#3444,#3445,+#3446,#3447,#3448),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3442 = CARTESIAN_POINT('',(0.449462039413,-8.940048988987E-02));+#3443 = CARTESIAN_POINT('',(0.449462039422,8.380459087221E-02));+#3444 = CARTESIAN_POINT('',(0.599462039422,-2.797949516521E-03));+#3445 = CARTESIAN_POINT('',(0.749462039422,-8.940048990525E-02));+#3446 = CARTESIAN_POINT('',(0.599462039413,-0.176003030279));+#3447 = CARTESIAN_POINT('',(0.449462039404,-0.262605570652));+#3448 = CARTESIAN_POINT('',(0.449462039413,-8.940048988987E-02));+#3449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3450 = PCURVE('',#3451,#3456);+#3451 = CYLINDRICAL_SURFACE('',#3452,0.100000000003);+#3452 = AXIS2_PLACEMENT_3D('',#3453,#3454,#3455);+#3453 = CARTESIAN_POINT('',(2.299462039416,2.160599510105,+    9.314404469578E-02));+#3454 = DIRECTION('',(0.,0.,-1.));+#3455 = DIRECTION('',(1.,-2.984422084397E-11,0.));+#3456 = DEFINITIONAL_REPRESENTATION('',(#3457),#3461);+#3457 = LINE('',#3458,#3459);+#3458 = CARTESIAN_POINT('',(3.141592653611,9.314404469578E-02));+#3459 = VECTOR('',#3460,1.);+#3460 = DIRECTION('',(1.,0.));+#3461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3462 = ORIENTED_EDGE('',*,*,#3463,.T.);+#3463 = EDGE_CURVE('',#3431,#3464,#3466,.T.);+#3464 = VERTEX_POINT('',#3465);+#3465 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,0.));+#3466 = SURFACE_CURVE('',#3467,(#3471,#3478),.PCURVE_S1.);+#3467 = LINE('',#3468,#3469);+#3468 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,0.));+#3469 = VECTOR('',#3470,1.);+#3470 = DIRECTION('',(1.,0.,0.));+#3471 = PCURVE('',#227,#3472);+#3472 = DEFINITIONAL_REPRESENTATION('',(#3473),#3477);+#3473 = LINE('',#3474,#3475);+#3474 = CARTESIAN_POINT('',(0.549462039416,1.0599510108E-02));+#3475 = VECTOR('',#3476,1.);+#3476 = DIRECTION('',(1.,0.));+#3477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3478 = PCURVE('',#3479,#3484);+#3479 = PLANE('',#3480);+#3480 = AXIS2_PLACEMENT_3D('',#3481,#3482,#3483);+#3481 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+    9.314404469578E-02));+#3482 = DIRECTION('',(0.,1.,0.));+#3483 = DIRECTION('',(1.,0.,0.));+#3484 = DEFINITIONAL_REPRESENTATION('',(#3485),#3489);+#3485 = LINE('',#3486,#3487);+#3486 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3487 = VECTOR('',#3488,1.);+#3488 = DIRECTION('',(1.,0.));+#3489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3490 = ORIENTED_EDGE('',*,*,#3491,.T.);+#3491 = EDGE_CURVE('',#3464,#3492,#3494,.T.);+#3492 = VERTEX_POINT('',#3493);+#3493 = CARTESIAN_POINT('',(3.29946203942,2.060692661502,0.));+#3494 = SURFACE_CURVE('',#3495,(#3499,#3506),.PCURVE_S1.);+#3495 = LINE('',#3496,#3497);+#3496 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,0.));+#3497 = VECTOR('',#3498,1.);+#3498 = DIRECTION('',(2.026728773275E-04,-0.999999979462,0.));+#3499 = PCURVE('',#227,#3500);+#3500 = DEFINITIONAL_REPRESENTATION('',(#3501),#3505);+#3501 = LINE('',#3502,#3503);+#3502 = CARTESIAN_POINT('',(1.549421523723,1.0599510108E-02));+#3503 = VECTOR('',#3504,1.);+#3504 = DIRECTION('',(2.026728773275E-04,-0.999999979462));+#3505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3506 = PCURVE('',#3507,#3512);+#3507 = PLANE('',#3508);+#3508 = AXIS2_PLACEMENT_3D('',#3509,#3510,#3511);+#3509 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,+    9.314404469578E-02));+#3510 = DIRECTION('',(0.999999979462,2.02672877327E-04,0.));+#3511 = DIRECTION('',(2.02672877327E-04,-0.999999979462,0.));+#3512 = DEFINITIONAL_REPRESENTATION('',(#3513),#3517);+#3513 = LINE('',#3514,#3515);+#3514 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3515 = VECTOR('',#3516,1.);+#3516 = DIRECTION('',(1.,0.));+#3517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3518 = ORIENTED_EDGE('',*,*,#3519,.F.);+#3519 = EDGE_CURVE('',#3520,#3492,#3522,.T.);+#3520 = VERTEX_POINT('',#3521);+#3521 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,0.));+#3522 = SURFACE_CURVE('',#3523,(#3527,#3534),.PCURVE_S1.);+#3523 = LINE('',#3524,#3525);+#3524 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,0.));+#3525 = VECTOR('',#3526,1.);+#3526 = DIRECTION('',(-1.,0.,0.));+#3527 = PCURVE('',#227,#3528);+#3528 = DEFINITIONAL_REPRESENTATION('',(#3529),#3533);+#3529 = LINE('',#3530,#3531);+#3530 = CARTESIAN_POINT('',(1.674462032806,-0.189307338498));+#3531 = VECTOR('',#3532,1.);+#3532 = DIRECTION('',(-1.,0.));+#3533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3534 = PCURVE('',#3535,#3540);+#3535 = PLANE('',#3536);+#3536 = AXIS2_PLACEMENT_3D('',#3537,#3538,#3539);+#3537 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+    9.314404469578E-02));+#3538 = DIRECTION('',(0.,1.,0.));+#3539 = DIRECTION('',(-1.,0.,0.));+#3540 = DEFINITIONAL_REPRESENTATION('',(#3541),#3545);+#3541 = LINE('',#3542,#3543);+#3542 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#3543 = VECTOR('',#3544,1.);+#3544 = DIRECTION('',(1.,0.));+#3545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3546 = ORIENTED_EDGE('',*,*,#3547,.F.);+#3547 = EDGE_CURVE('',#3548,#3520,#3550,.T.);+#3548 = VERTEX_POINT('',#3549);+#3549 = CARTESIAN_POINT('',(3.5,2.025441610143,0.));+#3550 = SURFACE_CURVE('',#3551,(#3555,#3562),.PCURVE_S1.);+#3551 = LINE('',#3552,#3553);+#3552 = CARTESIAN_POINT('',(3.5,2.025441610143,0.));+#3553 = VECTOR('',#3554,1.);+#3554 = DIRECTION('',(-0.906183139987,0.422885465349,0.));+#3555 = PCURVE('',#227,#3556);+#3556 = DEFINITIONAL_REPRESENTATION('',(#3557),#3561);+#3557 = LINE('',#3558,#3559);+#3558 = CARTESIAN_POINT('',(1.75,-0.224558389857));+#3559 = VECTOR('',#3560,1.);+#3560 = DIRECTION('',(-0.906183139987,0.422885465349));+#3561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3562 = PCURVE('',#3563,#3568);+#3563 = PLANE('',#3564);+#3564 = AXIS2_PLACEMENT_3D('',#3565,#3566,#3567);+#3565 = CARTESIAN_POINT('',(3.499462039424,2.025692658412,+    9.314404469578E-02));+#3566 = DIRECTION('',(0.422885465349,0.906183139987,0.));+#3567 = DIRECTION('',(-0.906183139987,0.422885465349,0.));+#3568 = DEFINITIONAL_REPRESENTATION('',(#3569),#3573);+#3569 = LINE('',#3570,#3571);+#3570 = CARTESIAN_POINT('',(-5.936554680098E-04,-9.314404469578E-02));+#3571 = VECTOR('',#3572,1.);+#3572 = DIRECTION('',(1.,0.));+#3573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3574 = ORIENTED_EDGE('',*,*,#3575,.F.);+#3575 = EDGE_CURVE('',#3576,#3548,#3578,.T.);+#3576 = VERTEX_POINT('',#3577);+#3577 = CARTESIAN_POINT('',(3.5,2.795943709766,0.));+#3578 = SURFACE_CURVE('',#3579,(#3583,#3590),.PCURVE_S1.);+#3579 = LINE('',#3580,#3581);+#3580 = CARTESIAN_POINT('',(3.5,2.795943709766,0.));+#3581 = VECTOR('',#3582,1.);+#3582 = DIRECTION('',(0.,-1.,0.));+#3583 = PCURVE('',#227,#3584);+#3584 = DEFINITIONAL_REPRESENTATION('',(#3585),#3589);+#3585 = LINE('',#3586,#3587);+#3586 = CARTESIAN_POINT('',(1.75,0.545943709766));+#3587 = VECTOR('',#3588,1.);+#3588 = DIRECTION('',(0.,-1.));+#3589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3590 = PCURVE('',#194,#3591);+#3591 = DEFINITIONAL_REPRESENTATION('',(#3592),#3596);+#3592 = LINE('',#3593,#3594);+#3593 = CARTESIAN_POINT('',(2.795943709766,0.));+#3594 = VECTOR('',#3595,1.);+#3595 = DIRECTION('',(-1.,0.));+#3596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3597 = ORIENTED_EDGE('',*,*,#3598,.F.);+#3598 = EDGE_CURVE('',#3599,#3576,#3601,.T.);+#3599 = VERTEX_POINT('',#3600);+#3600 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,0.));+#3601 = SURFACE_CURVE('',#3602,(#3606,#3613),.PCURVE_S1.);+#3602 = LINE('',#3603,#3604);+#3603 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,0.));+#3604 = VECTOR('',#3605,1.);+#3605 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3606 = PCURVE('',#227,#3607);+#3607 = DEFINITIONAL_REPRESENTATION('',(#3608),#3612);+#3608 = LINE('',#3609,#3610);+#3609 = CARTESIAN_POINT('',(1.674462039427,0.510692661499));+#3610 = VECTOR('',#3611,1.);+#3611 = DIRECTION('',(0.906183139998,0.422885465325));+#3612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3613 = PCURVE('',#3614,#3619);+#3614 = PLANE('',#3615);+#3615 = AXIS2_PLACEMENT_3D('',#3616,#3617,#3618);+#3616 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,+    9.314404469578E-02));+#3617 = DIRECTION('',(0.422885465325,-0.906183139998,0.));+#3618 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3619 = DEFINITIONAL_REPRESENTATION('',(#3620),#3624);+#3620 = LINE('',#3621,#3622);+#3621 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#3622 = VECTOR('',#3623,1.);+#3623 = DIRECTION('',(1.,0.));+#3624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3625 = ORIENTED_EDGE('',*,*,#3626,.F.);+#3626 = EDGE_CURVE('',#1027,#3599,#3627,.T.);+#3627 = SURFACE_CURVE('',#3628,(#3632,#3639),.PCURVE_S1.);+#3628 = LINE('',#3629,#3630);+#3629 = CARTESIAN_POINT('',(2.724462046003,2.760692661498,0.));+#3630 = VECTOR('',#3631,1.);+#3631 = DIRECTION('',(1.,2.216639591132E-12,0.));+#3632 = PCURVE('',#227,#3633);+#3633 = DEFINITIONAL_REPRESENTATION('',(#3634),#3638);+#3634 = LINE('',#3635,#3636);+#3635 = CARTESIAN_POINT('',(0.974462046003,0.510692661498));+#3636 = VECTOR('',#3637,1.);+#3637 = DIRECTION('',(1.,2.216639591132E-12));+#3638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3639 = PCURVE('',#3640,#3645);+#3640 = PLANE('',#3641);+#3641 = AXIS2_PLACEMENT_3D('',#3642,#3643,#3644);+#3642 = CARTESIAN_POINT('',(3.349462032809,2.760692661499,+    9.314404469578E-02));+#3643 = DIRECTION('',(0.,-1.,0.));+#3644 = DIRECTION('',(1.,0.,0.));+#3645 = DEFINITIONAL_REPRESENTATION('',(#3646),#3650);+#3646 = LINE('',#3647,#3648);+#3647 = CARTESIAN_POINT('',(-0.624999986806,-9.314404469578E-02));+#3648 = VECTOR('',#3649,1.);+#3649 = DIRECTION('',(1.,0.));+#3650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3651 = ADVANCED_FACE('',(#3652),#3666,.F.);+#3652 = FACE_BOUND('',#3653,.F.);+#3653 = EDGE_LOOP('',(#3654,#3689,#3712,#3740,#3768,#3796));+#3654 = ORIENTED_EDGE('',*,*,#3655,.T.);+#3655 = EDGE_CURVE('',#3656,#3658,#3660,.T.);+#3656 = VERTEX_POINT('',#3657);+#3657 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,0.));+#3658 = VERTEX_POINT('',#3659);+#3659 = CARTESIAN_POINT('',(3.5,1.52544161323,0.));+#3660 = SURFACE_CURVE('',#3661,(#3665,#3677),.PCURVE_S1.);+#3661 = LINE('',#3662,#3663);+#3662 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,0.));+#3663 = VECTOR('',#3664,1.);+#3664 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#3665 = PCURVE('',#3666,#3671);+#3666 = PLANE('',#3667);+#3667 = AXIS2_PLACEMENT_3D('',#3668,#3669,#3670);+#3668 = CARTESIAN_POINT('',(1.75,2.25,0.));+#3669 = DIRECTION('',(0.,0.,1.));+#3670 = DIRECTION('',(1.,0.,-0.));+#3671 = DEFINITIONAL_REPRESENTATION('',(#3672),#3676);+#3672 = LINE('',#3673,#3674);+#3673 = CARTESIAN_POINT('',(1.674462039423,-0.689307338499));+#3674 = VECTOR('',#3675,1.);+#3675 = DIRECTION('',(0.906183139987,-0.422885465348));+#3676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3677 = PCURVE('',#3678,#3683);+#3678 = PLANE('',#3679);+#3679 = AXIS2_PLACEMENT_3D('',#3680,#3681,#3682);+#3680 = CARTESIAN_POINT('',(3.424462039427,1.560692661499,+    9.314404469578E-02));+#3681 = DIRECTION('',(0.422885465348,0.906183139987,0.));+#3682 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#3683 = DEFINITIONAL_REPRESENTATION('',(#3684),#3688);+#3684 = LINE('',#3685,#3686);+#3685 = CARTESIAN_POINT('',(-4.470391181211E-12,9.314404469578E-02));+#3686 = VECTOR('',#3687,1.);+#3687 = DIRECTION('',(1.,0.));+#3688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3689 = ORIENTED_EDGE('',*,*,#3690,.F.);+#3690 = EDGE_CURVE('',#3691,#3658,#3693,.T.);+#3691 = VERTEX_POINT('',#3692);+#3692 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#3693 = SURFACE_CURVE('',#3694,(#3698,#3705),.PCURVE_S1.);+#3694 = LINE('',#3695,#3696);+#3695 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#3696 = VECTOR('',#3697,1.);+#3697 = DIRECTION('',(0.,-1.,0.));+#3698 = PCURVE('',#3666,#3699);+#3699 = DEFINITIONAL_REPRESENTATION('',(#3700),#3704);+#3700 = LINE('',#3701,#3702);+#3701 = CARTESIAN_POINT('',(1.75,-0.404056290232));+#3702 = VECTOR('',#3703,1.);+#3703 = DIRECTION('',(0.,-1.));+#3704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3705 = PCURVE('',#194,#3706);+#3706 = DEFINITIONAL_REPRESENTATION('',(#3707),#3711);+#3707 = LINE('',#3708,#3709);+#3708 = CARTESIAN_POINT('',(1.845943709768,0.));+#3709 = VECTOR('',#3710,1.);+#3710 = DIRECTION('',(-1.,0.));+#3711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3712 = ORIENTED_EDGE('',*,*,#3713,.T.);+#3713 = EDGE_CURVE('',#3691,#3714,#3716,.T.);+#3714 = VERTEX_POINT('',#3715);+#3715 = CARTESIAN_POINT('',(3.424462039423,1.810692661497,0.));+#3716 = SURFACE_CURVE('',#3717,(#3721,#3728),.PCURVE_S1.);+#3717 = LINE('',#3718,#3719);+#3718 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#3719 = VECTOR('',#3720,1.);+#3720 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#3721 = PCURVE('',#3666,#3722);+#3722 = DEFINITIONAL_REPRESENTATION('',(#3723),#3727);+#3723 = LINE('',#3724,#3725);+#3724 = CARTESIAN_POINT('',(1.75,-0.404056290232));+#3725 = VECTOR('',#3726,1.);+#3726 = DIRECTION('',(-0.906183139987,-0.422885465348));+#3727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3728 = PCURVE('',#3729,#3734);+#3729 = PLANE('',#3730);+#3730 = AXIS2_PLACEMENT_3D('',#3731,#3732,#3733);+#3731 = CARTESIAN_POINT('',(3.499462039424,1.845692661499,+    9.314404469578E-02));+#3732 = DIRECTION('',(0.422885465348,-0.906183139987,0.));+#3733 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#3734 = DEFINITIONAL_REPRESENTATION('',(#3735),#3739);+#3735 = LINE('',#3736,#3737);+#3736 = CARTESIAN_POINT('',(-5.9365546801E-04,9.314404469578E-02));+#3737 = VECTOR('',#3738,1.);+#3738 = DIRECTION('',(1.,0.));+#3739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3740 = ORIENTED_EDGE('',*,*,#3741,.F.);+#3741 = EDGE_CURVE('',#3742,#3714,#3744,.T.);+#3742 = VERTEX_POINT('',#3743);+#3743 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#3744 = SURFACE_CURVE('',#3745,(#3749,#3756),.PCURVE_S1.);+#3745 = LINE('',#3746,#3747);+#3746 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#3747 = VECTOR('',#3748,1.);+#3748 = DIRECTION('',(1.,0.,0.));+#3749 = PCURVE('',#3666,#3750);+#3750 = DEFINITIONAL_REPRESENTATION('',(#3751),#3755);+#3751 = LINE('',#3752,#3753);+#3752 = CARTESIAN_POINT('',(1.54946203942,-0.439307338503));+#3753 = VECTOR('',#3754,1.);+#3754 = DIRECTION('',(1.,0.));+#3755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3756 = PCURVE('',#3757,#3762);+#3757 = PLANE('',#3758);+#3758 = AXIS2_PLACEMENT_3D('',#3759,#3760,#3761);+#3759 = CARTESIAN_POINT('',(3.349462039412,1.810692661497,+    9.314404469578E-02));+#3760 = DIRECTION('',(0.,-1.,0.));+#3761 = DIRECTION('',(1.,0.,0.));+#3762 = DEFINITIONAL_REPRESENTATION('',(#3763),#3767);+#3763 = LINE('',#3764,#3765);+#3764 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#3765 = VECTOR('',#3766,1.);+#3766 = DIRECTION('',(1.,0.));+#3767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3768 = ORIENTED_EDGE('',*,*,#3769,.T.);+#3769 = EDGE_CURVE('',#3742,#3770,#3772,.T.);+#3770 = VERTEX_POINT('',#3771);+#3771 = CARTESIAN_POINT('',(3.29946203942,1.560692661501,0.));+#3772 = SURFACE_CURVE('',#3773,(#3777,#3784),.PCURVE_S1.);+#3773 = LINE('',#3774,#3775);+#3774 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#3775 = VECTOR('',#3776,1.);+#3776 = DIRECTION('',(0.,-1.,0.));+#3777 = PCURVE('',#3666,#3778);+#3778 = DEFINITIONAL_REPRESENTATION('',(#3779),#3783);+#3779 = LINE('',#3780,#3781);+#3780 = CARTESIAN_POINT('',(1.54946203942,-0.439307338503));+#3781 = VECTOR('',#3782,1.);+#3782 = DIRECTION('',(0.,-1.));+#3783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3784 = PCURVE('',#3785,#3790);+#3785 = PLANE('',#3786);+#3786 = AXIS2_PLACEMENT_3D('',#3787,#3788,#3789);+#3787 = CARTESIAN_POINT('',(3.29946203942,1.810692661499,+    9.314404469578E-02));+#3788 = DIRECTION('',(1.,0.,0.));+#3789 = DIRECTION('',(0.,-1.,0.));+#3790 = DEFINITIONAL_REPRESENTATION('',(#3791),#3795);+#3791 = LINE('',#3792,#3793);+#3792 = CARTESIAN_POINT('',(1.99995575656E-12,9.314404469578E-02));+#3793 = VECTOR('',#3794,1.);+#3794 = DIRECTION('',(1.,0.));+#3795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3796 = ORIENTED_EDGE('',*,*,#3797,.F.);+#3797 = EDGE_CURVE('',#3656,#3770,#3798,.T.);+#3798 = SURFACE_CURVE('',#3799,(#3803,#3810),.PCURVE_S1.);+#3799 = LINE('',#3800,#3801);+#3800 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,0.));+#3801 = VECTOR('',#3802,1.);+#3802 = DIRECTION('',(-1.,0.,0.));+#3803 = PCURVE('',#3666,#3804);+#3804 = DEFINITIONAL_REPRESENTATION('',(#3805),#3809);+#3805 = LINE('',#3806,#3807);+#3806 = CARTESIAN_POINT('',(1.674462039423,-0.689307338499));+#3807 = VECTOR('',#3808,1.);+#3808 = DIRECTION('',(-1.,0.));+#3809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3810 = PCURVE('',#3811,#3816);+#3811 = PLANE('',#3812);+#3812 = AXIS2_PLACEMENT_3D('',#3813,#3814,#3815);+#3813 = CARTESIAN_POINT('',(3.424462032806,1.560692661501,+    9.314404469578E-02));+#3814 = DIRECTION('',(0.,1.,0.));+#3815 = DIRECTION('',(-1.,0.,0.));+#3816 = DEFINITIONAL_REPRESENTATION('',(#3817),#3821);+#3817 = LINE('',#3818,#3819);+#3818 = CARTESIAN_POINT('',(-6.61700028104E-09,-9.314404469578E-02));+#3819 = VECTOR('',#3820,1.);+#3820 = DIRECTION('',(1.,0.));+#3821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3822 = ADVANCED_FACE('',(#3823),#3837,.F.);+#3823 = FACE_BOUND('',#3824,.F.);+#3824 = EDGE_LOOP('',(#3825,#3860,#3883,#3911,#3939,#3967));+#3825 = ORIENTED_EDGE('',*,*,#3826,.T.);+#3826 = EDGE_CURVE('',#3827,#3829,#3831,.T.);+#3827 = VERTEX_POINT('',#3828);+#3828 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,0.));+#3829 = VERTEX_POINT('',#3830);+#3830 = CARTESIAN_POINT('',(3.5,0.52544161323,0.));+#3831 = SURFACE_CURVE('',#3832,(#3836,#3848),.PCURVE_S1.);+#3832 = LINE('',#3833,#3834);+#3833 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,0.));+#3834 = VECTOR('',#3835,1.);+#3835 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#3836 = PCURVE('',#3837,#3842);+#3837 = PLANE('',#3838);+#3838 = AXIS2_PLACEMENT_3D('',#3839,#3840,#3841);+#3839 = CARTESIAN_POINT('',(1.75,2.25,0.));+#3840 = DIRECTION('',(0.,0.,1.));+#3841 = DIRECTION('',(1.,0.,-0.));+#3842 = DEFINITIONAL_REPRESENTATION('',(#3843),#3847);+#3843 = LINE('',#3844,#3845);+#3844 = CARTESIAN_POINT('',(1.674462039431,-1.689307338503));+#3845 = VECTOR('',#3846,1.);+#3846 = DIRECTION('',(0.90618313999,-0.422885465342));+#3847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3848 = PCURVE('',#3849,#3854);+#3849 = PLANE('',#3850);+#3850 = AXIS2_PLACEMENT_3D('',#3851,#3852,#3853);+#3851 = CARTESIAN_POINT('',(3.424462039427,0.560692661499,+    9.314404469578E-02));+#3852 = DIRECTION('',(0.422885465342,0.90618313999,0.));+#3853 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#3854 = DEFINITIONAL_REPRESENTATION('',(#3855),#3859);+#3855 = LINE('',#3856,#3857);+#3856 = CARTESIAN_POINT('',(4.470391181211E-12,9.314404469578E-02));+#3857 = VECTOR('',#3858,1.);+#3858 = DIRECTION('',(1.,0.));+#3859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3860 = ORIENTED_EDGE('',*,*,#3861,.F.);+#3861 = EDGE_CURVE('',#3862,#3829,#3864,.T.);+#3862 = VERTEX_POINT('',#3863);+#3863 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#3864 = SURFACE_CURVE('',#3865,(#3869,#3876),.PCURVE_S1.);+#3865 = LINE('',#3866,#3867);+#3866 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#3867 = VECTOR('',#3868,1.);+#3868 = DIRECTION('',(0.,-1.,0.));+#3869 = PCURVE('',#3837,#3870);+#3870 = DEFINITIONAL_REPRESENTATION('',(#3871),#3875);+#3871 = LINE('',#3872,#3873);+#3872 = CARTESIAN_POINT('',(1.75,-1.404056290233));+#3873 = VECTOR('',#3874,1.);+#3874 = DIRECTION('',(0.,-1.));+#3875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3876 = PCURVE('',#194,#3877);+#3877 = DEFINITIONAL_REPRESENTATION('',(#3878),#3882);+#3878 = LINE('',#3879,#3880);+#3879 = CARTESIAN_POINT('',(0.845943709767,0.));+#3880 = VECTOR('',#3881,1.);+#3881 = DIRECTION('',(-1.,0.));+#3882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3883 = ORIENTED_EDGE('',*,*,#3884,.T.);+#3884 = EDGE_CURVE('',#3862,#3885,#3887,.T.);+#3885 = VERTEX_POINT('',#3886);+#3886 = CARTESIAN_POINT('',(3.424462039434,0.810692661502,0.));+#3887 = SURFACE_CURVE('',#3888,(#3892,#3899),.PCURVE_S1.);+#3888 = LINE('',#3889,#3890);+#3889 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#3890 = VECTOR('',#3891,1.);+#3891 = DIRECTION('',(-0.90618313999,-0.422885465342,0.));+#3892 = PCURVE('',#3837,#3893);+#3893 = DEFINITIONAL_REPRESENTATION('',(#3894),#3898);+#3894 = LINE('',#3895,#3896);+#3895 = CARTESIAN_POINT('',(1.75,-1.404056290233));+#3896 = VECTOR('',#3897,1.);+#3897 = DIRECTION('',(-0.90618313999,-0.422885465342));+#3898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3899 = PCURVE('',#3900,#3905);+#3900 = PLANE('',#3901);+#3901 = AXIS2_PLACEMENT_3D('',#3902,#3903,#3904);+#3902 = CARTESIAN_POINT('',(3.499462039424,0.845692661499,+    9.314404469578E-02));+#3903 = DIRECTION('',(0.422885465342,-0.90618313999,0.));+#3904 = DIRECTION('',(-0.90618313999,-0.422885465342,0.));+#3905 = DEFINITIONAL_REPRESENTATION('',(#3906),#3910);+#3906 = LINE('',#3907,#3908);+#3907 = CARTESIAN_POINT('',(-5.936554675872E-04,9.314404469578E-02));+#3908 = VECTOR('',#3909,1.);+#3909 = DIRECTION('',(1.,0.));+#3910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3911 = ORIENTED_EDGE('',*,*,#3912,.F.);+#3912 = EDGE_CURVE('',#3913,#3885,#3915,.T.);+#3913 = VERTEX_POINT('',#3914);+#3914 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#3915 = SURFACE_CURVE('',#3916,(#3920,#3927),.PCURVE_S1.);+#3916 = LINE('',#3917,#3918);+#3917 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#3918 = VECTOR('',#3919,1.);+#3919 = DIRECTION('',(1.,0.,0.));+#3920 = PCURVE('',#3837,#3921);+#3921 = DEFINITIONAL_REPRESENTATION('',(#3922),#3926);+#3922 = LINE('',#3923,#3924);+#3923 = CARTESIAN_POINT('',(1.54946203942,-1.439307338498));+#3924 = VECTOR('',#3925,1.);+#3925 = DIRECTION('',(1.,0.));+#3926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3927 = PCURVE('',#3928,#3933);+#3928 = PLANE('',#3929);+#3929 = AXIS2_PLACEMENT_3D('',#3930,#3931,#3932);+#3930 = CARTESIAN_POINT('',(3.349462039412,0.810692661502,+    9.314404469578E-02));+#3931 = DIRECTION('',(0.,-1.,0.));+#3932 = DIRECTION('',(1.,0.,0.));+#3933 = DEFINITIONAL_REPRESENTATION('',(#3934),#3938);+#3934 = LINE('',#3935,#3936);+#3935 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#3936 = VECTOR('',#3937,1.);+#3937 = DIRECTION('',(1.,0.));+#3938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3939 = ORIENTED_EDGE('',*,*,#3940,.T.);+#3940 = EDGE_CURVE('',#3913,#3941,#3943,.T.);+#3941 = VERTEX_POINT('',#3942);+#3942 = CARTESIAN_POINT('',(3.29946203942,0.560692661497,0.));+#3943 = SURFACE_CURVE('',#3944,(#3948,#3955),.PCURVE_S1.);+#3944 = LINE('',#3945,#3946);+#3945 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#3946 = VECTOR('',#3947,1.);+#3947 = DIRECTION('',(0.,-1.,0.));+#3948 = PCURVE('',#3837,#3949);+#3949 = DEFINITIONAL_REPRESENTATION('',(#3950),#3954);+#3950 = LINE('',#3951,#3952);+#3951 = CARTESIAN_POINT('',(1.54946203942,-1.439307338498));+#3952 = VECTOR('',#3953,1.);+#3953 = DIRECTION('',(0.,-1.));+#3954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3955 = PCURVE('',#3956,#3961);+#3956 = PLANE('',#3957);+#3957 = AXIS2_PLACEMENT_3D('',#3958,#3959,#3960);+#3958 = CARTESIAN_POINT('',(3.29946203942,0.810692661498,+    9.314404469578E-02));+#3959 = DIRECTION('',(1.,0.,0.));+#3960 = DIRECTION('',(0.,-1.,0.));+#3961 = DEFINITIONAL_REPRESENTATION('',(#3962),#3966);+#3962 = LINE('',#3963,#3964);+#3963 = CARTESIAN_POINT('',(-4.000022535422E-12,9.314404469578E-02));+#3964 = VECTOR('',#3965,1.);+#3965 = DIRECTION('',(1.,0.));+#3966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3967 = ORIENTED_EDGE('',*,*,#3968,.F.);+#3968 = EDGE_CURVE('',#3827,#3941,#3969,.T.);+#3969 = SURFACE_CURVE('',#3970,(#3974,#3981),.PCURVE_S1.);+#3970 = LINE('',#3971,#3972);+#3971 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,0.));+#3972 = VECTOR('',#3973,1.);+#3973 = DIRECTION('',(-1.,0.,0.));+#3974 = PCURVE('',#3837,#3975);+#3975 = DEFINITIONAL_REPRESENTATION('',(#3976),#3980);+#3976 = LINE('',#3977,#3978);+#3977 = CARTESIAN_POINT('',(1.674462039431,-1.689307338503));+#3978 = VECTOR('',#3979,1.);+#3979 = DIRECTION('',(-1.,0.));+#3980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3981 = PCURVE('',#3982,#3987);+#3982 = PLANE('',#3983);+#3983 = AXIS2_PLACEMENT_3D('',#3984,#3985,#3986);+#3984 = CARTESIAN_POINT('',(3.424462032806,0.560692661497,+    9.314404469578E-02));+#3985 = DIRECTION('',(0.,1.,0.));+#3986 = DIRECTION('',(-1.,0.,0.));+#3987 = DEFINITIONAL_REPRESENTATION('',(#3988),#3992);+#3988 = LINE('',#3989,#3990);+#3989 = CARTESIAN_POINT('',(-6.625000104066E-09,-9.314404469578E-02));+#3990 = VECTOR('',#3991,1.);+#3991 = DIRECTION('',(1.,0.));+#3992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3993 = ADVANCED_FACE('',(#3994),#4008,.F.);+#3994 = FACE_BOUND('',#3995,.F.);+#3995 = EDGE_LOOP('',(#3996,#4031,#4054,#4082,#4110,#4138));+#3996 = ORIENTED_EDGE('',*,*,#3997,.T.);+#3997 = EDGE_CURVE('',#3998,#4000,#4002,.T.);+#3998 = VERTEX_POINT('',#3999);+#3999 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,0.));+#4000 = VERTEX_POINT('',#4001);+#4001 = CARTESIAN_POINT('',(3.5,1.02544161323,0.));+#4002 = SURFACE_CURVE('',#4003,(#4007,#4019),.PCURVE_S1.);+#4003 = LINE('',#4004,#4005);+#4004 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,0.));+#4005 = VECTOR('',#4006,1.);+#4006 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#4007 = PCURVE('',#4008,#4013);+#4008 = PLANE('',#4009);+#4009 = AXIS2_PLACEMENT_3D('',#4010,#4011,#4012);+#4010 = CARTESIAN_POINT('',(1.75,2.25,0.));+#4011 = DIRECTION('',(0.,0.,1.));+#4012 = DIRECTION('',(1.,0.,-0.));+#4013 = DEFINITIONAL_REPRESENTATION('',(#4014),#4018);+#4014 = LINE('',#4015,#4016);+#4015 = CARTESIAN_POINT('',(1.674462039427,-1.189307338501));+#4016 = VECTOR('',#4017,1.);+#4017 = DIRECTION('',(0.90618313999,-0.422885465342));+#4018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4019 = PCURVE('',#4020,#4025);+#4020 = PLANE('',#4021);+#4021 = AXIS2_PLACEMENT_3D('',#4022,#4023,#4024);+#4022 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+    9.314404469578E-02));+#4023 = DIRECTION('',(0.422885465342,0.90618313999,0.));+#4024 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#4025 = DEFINITIONAL_REPRESENTATION('',(#4026),#4030);+#4026 = LINE('',#4027,#4028);+#4027 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#4028 = VECTOR('',#4029,1.);+#4029 = DIRECTION('',(1.,0.));+#4030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4031 = ORIENTED_EDGE('',*,*,#4032,.F.);+#4032 = EDGE_CURVE('',#4033,#4000,#4035,.T.);+#4033 = VERTEX_POINT('',#4034);+#4034 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#4035 = SURFACE_CURVE('',#4036,(#4040,#4047),.PCURVE_S1.);+#4036 = LINE('',#4037,#4038);+#4037 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#4038 = VECTOR('',#4039,1.);+#4039 = DIRECTION('',(0.,-1.,0.));+#4040 = PCURVE('',#4008,#4041);+#4041 = DEFINITIONAL_REPRESENTATION('',(#4042),#4046);+#4042 = LINE('',#4043,#4044);+#4043 = CARTESIAN_POINT('',(1.75,-0.904056290232));+#4044 = VECTOR('',#4045,1.);+#4045 = DIRECTION('',(0.,-1.));+#4046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4047 = PCURVE('',#194,#4048);+#4048 = DEFINITIONAL_REPRESENTATION('',(#4049),#4053);+#4049 = LINE('',#4050,#4051);+#4050 = CARTESIAN_POINT('',(1.345943709768,0.));+#4051 = VECTOR('',#4052,1.);+#4052 = DIRECTION('',(-1.,0.));+#4053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4054 = ORIENTED_EDGE('',*,*,#4055,.T.);+#4055 = EDGE_CURVE('',#4033,#4056,#4058,.T.);+#4056 = VERTEX_POINT('',#4057);+#4057 = CARTESIAN_POINT('',(3.42446203942,1.310692661495,0.));+#4058 = SURFACE_CURVE('',#4059,(#4063,#4070),.PCURVE_S1.);+#4059 = LINE('',#4060,#4061);+#4060 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#4061 = VECTOR('',#4062,1.);+#4062 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#4063 = PCURVE('',#4008,#4064);+#4064 = DEFINITIONAL_REPRESENTATION('',(#4065),#4069);+#4065 = LINE('',#4066,#4067);+#4066 = CARTESIAN_POINT('',(1.75,-0.904056290232));+#4067 = VECTOR('',#4068,1.);+#4068 = DIRECTION('',(-0.906183139987,-0.422885465348));+#4069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4070 = PCURVE('',#4071,#4076);+#4071 = PLANE('',#4072);+#4072 = AXIS2_PLACEMENT_3D('',#4073,#4074,#4075);+#4073 = CARTESIAN_POINT('',(3.499462039424,1.345692661499,+    9.314404469578E-02));+#4074 = DIRECTION('',(0.422885465348,-0.906183139987,0.));+#4075 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#4076 = DEFINITIONAL_REPRESENTATION('',(#4077),#4081);+#4077 = LINE('',#4078,#4079);+#4078 = CARTESIAN_POINT('',(-5.9365546801E-04,9.314404469578E-02));+#4079 = VECTOR('',#4080,1.);+#4080 = DIRECTION('',(1.,0.));+#4081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4082 = ORIENTED_EDGE('',*,*,#4083,.F.);+#4083 = EDGE_CURVE('',#4084,#4056,#4086,.T.);+#4084 = VERTEX_POINT('',#4085);+#4085 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#4086 = SURFACE_CURVE('',#4087,(#4091,#4098),.PCURVE_S1.);+#4087 = LINE('',#4088,#4089);+#4088 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#4089 = VECTOR('',#4090,1.);+#4090 = DIRECTION('',(1.,0.,0.));+#4091 = PCURVE('',#4008,#4092);+#4092 = DEFINITIONAL_REPRESENTATION('',(#4093),#4097);+#4093 = LINE('',#4094,#4095);+#4094 = CARTESIAN_POINT('',(1.54946203942,-0.939307338505));+#4095 = VECTOR('',#4096,1.);+#4096 = DIRECTION('',(1.,0.));+#4097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4098 = PCURVE('',#4099,#4104);+#4099 = PLANE('',#4100);+#4100 = AXIS2_PLACEMENT_3D('',#4101,#4102,#4103);+#4101 = CARTESIAN_POINT('',(3.349462032809,1.310692661495,+    9.314404469578E-02));+#4102 = DIRECTION('',(0.,-1.,0.));+#4103 = DIRECTION('',(1.,0.,0.));+#4104 = DEFINITIONAL_REPRESENTATION('',(#4105),#4109);+#4105 = LINE('',#4106,#4107);+#4106 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#4107 = VECTOR('',#4108,1.);+#4108 = DIRECTION('',(1.,0.));+#4109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4110 = ORIENTED_EDGE('',*,*,#4111,.T.);+#4111 = EDGE_CURVE('',#4084,#4112,#4114,.T.);+#4112 = VERTEX_POINT('',#4113);+#4113 = CARTESIAN_POINT('',(3.29946203942,1.060692661499,0.));+#4114 = SURFACE_CURVE('',#4115,(#4119,#4126),.PCURVE_S1.);+#4115 = LINE('',#4116,#4117);+#4116 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#4117 = VECTOR('',#4118,1.);+#4118 = DIRECTION('',(0.,-1.,0.));+#4119 = PCURVE('',#4008,#4120);+#4120 = DEFINITIONAL_REPRESENTATION('',(#4121),#4125);+#4121 = LINE('',#4122,#4123);+#4122 = CARTESIAN_POINT('',(1.54946203942,-0.939307338505));+#4123 = VECTOR('',#4124,1.);+#4124 = DIRECTION('',(0.,-1.));+#4125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4126 = PCURVE('',#4127,#4132);+#4127 = PLANE('',#4128);+#4128 = AXIS2_PLACEMENT_3D('',#4129,#4130,#4131);+#4129 = CARTESIAN_POINT('',(3.29946203942,1.310692661499,+    9.314404469578E-02));+#4130 = DIRECTION('',(1.,0.,0.));+#4131 = DIRECTION('',(0.,-1.,0.));+#4132 = DEFINITIONAL_REPRESENTATION('',(#4133),#4137);+#4133 = LINE('',#4134,#4135);+#4134 = CARTESIAN_POINT('',(3.99991151312E-12,9.314404469578E-02));+#4135 = VECTOR('',#4136,1.);+#4136 = DIRECTION('',(1.,0.));+#4137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4138 = ORIENTED_EDGE('',*,*,#4139,.F.);+#4139 = EDGE_CURVE('',#3998,#4112,#4140,.T.);+#4140 = SURFACE_CURVE('',#4141,(#4145,#4152),.PCURVE_S1.);+#4141 = LINE('',#4142,#4143);+#4142 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,0.));+#4143 = VECTOR('',#4144,1.);+#4144 = DIRECTION('',(-1.,0.,0.));+#4145 = PCURVE('',#4008,#4146);+#4146 = DEFINITIONAL_REPRESENTATION('',(#4147),#4151);+#4147 = LINE('',#4148,#4149);+#4148 = CARTESIAN_POINT('',(1.674462039427,-1.189307338501));+#4149 = VECTOR('',#4150,1.);+#4150 = DIRECTION('',(-1.,0.));+#4151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4152 = PCURVE('',#4153,#4158);+#4153 = PLANE('',#4154);+#4154 = AXIS2_PLACEMENT_3D('',#4155,#4156,#4157);+#4155 = CARTESIAN_POINT('',(3.424462032806,1.060692661499,+    9.314404469578E-02));+#4156 = DIRECTION('',(0.,1.,0.));+#4157 = DIRECTION('',(-1.,0.,0.));+#4158 = DEFINITIONAL_REPRESENTATION('',(#4159),#4163);+#4159 = LINE('',#4160,#4161);+#4160 = CARTESIAN_POINT('',(-6.621000192553E-09,-9.314404469578E-02));+#4161 = VECTOR('',#4162,1.);+#4162 = DIRECTION('',(1.,0.));+#4163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4164 = ADVANCED_FACE('',(#4165),#536,.F.);+#4165 = FACE_BOUND('',#4166,.F.);+#4166 = EDGE_LOOP('',(#4167,#4190,#4191,#4214));+#4167 = ORIENTED_EDGE('',*,*,#4168,.F.);+#4168 = EDGE_CURVE('',#516,#4169,#4171,.T.);+#4169 = VERTEX_POINT('',#4170);+#4170 = CARTESIAN_POINT('',(0.,1.845441613228,9.314404469578E-02));+#4171 = SURFACE_CURVE('',#4172,(#4176,#4183),.PCURVE_S1.);+#4172 = LINE('',#4173,#4174);+#4173 = CARTESIAN_POINT('',(0.,1.845441613228,0.));+#4174 = VECTOR('',#4175,1.);+#4175 = DIRECTION('',(0.,0.,1.));+#4176 = PCURVE('',#536,#4177);+#4177 = DEFINITIONAL_REPRESENTATION('',(#4178),#4182);+#4178 = LINE('',#4179,#4180);+#4179 = CARTESIAN_POINT('',(8.217107131148E-02,9.314404469578E-02));+#4180 = VECTOR('',#4181,1.);+#4181 = DIRECTION('',(0.,-1.));+#4182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4183 = PCURVE('',#140,#4184);+#4184 = DEFINITIONAL_REPRESENTATION('',(#4185),#4189);+#4185 = LINE('',#4186,#4187);+#4186 = CARTESIAN_POINT('',(2.654558386772,0.));+#4187 = VECTOR('',#4188,1.);+#4188 = DIRECTION('',(0.,1.));+#4189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4190 = ORIENTED_EDGE('',*,*,#513,.F.);+#4191 = ORIENTED_EDGE('',*,*,#4192,.F.);+#4192 = EDGE_CURVE('',#4193,#514,#4195,.T.);+#4193 = VERTEX_POINT('',#4194);+#4194 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+    9.314404469578E-02));+#4195 = SURFACE_CURVE('',#4196,(#4200,#4207),.PCURVE_S1.);+#4196 = LINE('',#4197,#4198);+#4197 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+    9.314404469578E-02));+#4198 = VECTOR('',#4199,1.);+#4199 = DIRECTION('',(0.,0.,-1.));+#4200 = PCURVE('',#536,#4201);+#4201 = DEFINITIONAL_REPRESENTATION('',(#4202),#4206);+#4202 = LINE('',#4203,#4204);+#4203 = CARTESIAN_POINT('',(-4.162359949872E-12,-0.));+#4204 = VECTOR('',#4205,1.);+#4205 = DIRECTION('',(0.,1.));+#4206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4207 = PCURVE('',#669,#4208);+#4208 = DEFINITIONAL_REPRESENTATION('',(#4209),#4213);+#4209 = LINE('',#4210,#4211);+#4210 = CARTESIAN_POINT('',(-6.599270005458E-09,0.));+#4211 = VECTOR('',#4212,1.);+#4212 = DIRECTION('',(0.,-1.));+#4213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4214 = ORIENTED_EDGE('',*,*,#4215,.T.);+#4215 = EDGE_CURVE('',#4193,#4169,#4216,.T.);+#4216 = SURFACE_CURVE('',#4217,(#4221,#4228),.PCURVE_S1.);+#4217 = LINE('',#4218,#4219);+#4218 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+    9.314404469578E-02));+#4219 = VECTOR('',#4220,1.);+#4220 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#4221 = PCURVE('',#536,#4222);+#4222 = DEFINITIONAL_REPRESENTATION('',(#4223),#4227);+#4223 = LINE('',#4224,#4225);+#4224 = CARTESIAN_POINT('',(-4.162359949872E-12,-0.));+#4225 = VECTOR('',#4226,1.);+#4226 = DIRECTION('',(1.,0.));+#4227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4228 = PCURVE('',#4229,#4234);+#4229 = PLANE('',#4230);+#4230 = AXIS2_PLACEMENT_3D('',#4231,#4232,#4233);+#4231 = CARTESIAN_POINT('',(0.594729450677,1.226456468988,+    9.314404469578E-02));+#4232 = DIRECTION('',(0.,0.,1.));+#4233 = DIRECTION('',(1.,0.,-0.));+#4234 = DEFINITIONAL_REPRESENTATION('',(#4235),#4239);+#4235 = LINE('',#4236,#4237);+#4236 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#4237 = VECTOR('',#4238,1.);+#4238 = DIRECTION('',(-0.90618313999,0.422885465342));+#4239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4240 = ADVANCED_FACE('',(#4241),#140,.T.);+#4241 = FACE_BOUND('',#4242,.F.);+#4242 = EDGE_LOOP('',(#4243,#4273,#4301,#4329,#4357,#4380,#4401,#4402,+    #4425,#4453,#4481,#4509,#4537,#4560,#4581,#4582,#4603,#4604,#4605,+    #4606,#4629,#4652,#4680,#4708,#4736,#4759,#4780,#4781,#4804,#4827,+    #4855,#4883,#4911,#4934,#4955,#4956,#4979,#5002,#5030,#5058,#5086,+    #5109,#5130,#5131,#5132,#5155,#5183,#5211,#5239,#5262,#5283,#5284,+    #5307,#5335,#5363,#5391,#5419,#5442,#5463,#5464));+#4243 = ORIENTED_EDGE('',*,*,#4244,.T.);+#4244 = EDGE_CURVE('',#4245,#4247,#4249,.T.);+#4245 = VERTEX_POINT('',#4246);+#4246 = CARTESIAN_POINT('',(0.,3.295441613229,9.314404469578E-02));+#4247 = VERTEX_POINT('',#4248);+#4248 = CARTESIAN_POINT('',(0.,3.345983916503,9.314404469578E-02));+#4249 = SURFACE_CURVE('',#4250,(#4254,#4261),.PCURVE_S1.);+#4250 = LINE('',#4251,#4252);+#4251 = CARTESIAN_POINT('',(0.,3.295441613229,9.314404469578E-02));+#4252 = VECTOR('',#4253,1.);+#4253 = DIRECTION('',(0.,1.,0.));+#4254 = PCURVE('',#140,#4255);+#4255 = DEFINITIONAL_REPRESENTATION('',(#4256),#4260);+#4256 = LINE('',#4257,#4258);+#4257 = CARTESIAN_POINT('',(1.204558386771,9.314404469578E-02));+#4258 = VECTOR('',#4259,1.);+#4259 = DIRECTION('',(-1.,0.));+#4260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4261 = PCURVE('',#4262,#4267);+#4262 = PLANE('',#4263);+#4263 = AXIS2_PLACEMENT_3D('',#4264,#4265,#4266);+#4264 = CARTESIAN_POINT('',(0.417539932793,3.385692661811,+    9.314404469578E-02));+#4265 = DIRECTION('',(0.,0.,1.));+#4266 = DIRECTION('',(1.,0.,-0.));+#4267 = DEFINITIONAL_REPRESENTATION('',(#4268),#4272);+#4268 = LINE('',#4269,#4270);+#4269 = CARTESIAN_POINT('',(-0.417539932793,-9.0251048582E-02));+#4270 = VECTOR('',#4271,1.);+#4271 = DIRECTION('',(0.,1.));+#4272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4273 = ORIENTED_EDGE('',*,*,#4274,.F.);+#4274 = EDGE_CURVE('',#4275,#4247,#4277,.T.);+#4275 = VERTEX_POINT('',#4276);+#4276 = CARTESIAN_POINT('',(0.,3.345983916503,0.193144044696));+#4277 = SURFACE_CURVE('',#4278,(#4282,#4289),.PCURVE_S1.);+#4278 = LINE('',#4279,#4280);+#4279 = CARTESIAN_POINT('',(0.,3.345983916503,0.193144044696));+#4280 = VECTOR('',#4281,1.);+#4281 = DIRECTION('',(0.,0.,-1.));+#4282 = PCURVE('',#140,#4283);+#4283 = DEFINITIONAL_REPRESENTATION('',(#4284),#4288);+#4284 = LINE('',#4285,#4286);+#4285 = CARTESIAN_POINT('',(1.154016083497,0.193144044696));+#4286 = VECTOR('',#4287,1.);+#4287 = DIRECTION('',(0.,-1.));+#4288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4289 = PCURVE('',#4290,#4295);+#4290 = PLANE('',#4291);+#4291 = AXIS2_PLACEMENT_3D('',#4292,#4293,#4294);+#4292 = CARTESIAN_POINT('',(-7.574131842608E-02,3.345983916503,+    0.193144044696));+#4293 = DIRECTION('',(0.,1.,0.));+#4294 = DIRECTION('',(1.,0.,0.));+#4295 = DEFINITIONAL_REPRESENTATION('',(#4296),#4300);+#4296 = LINE('',#4297,#4298);+#4297 = CARTESIAN_POINT('',(7.574131842608E-02,0.));+#4298 = VECTOR('',#4299,1.);+#4299 = DIRECTION('',(0.,1.));+#4300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4301 = ORIENTED_EDGE('',*,*,#4302,.T.);+#4302 = EDGE_CURVE('',#4275,#4303,#4305,.T.);+#4303 = VERTEX_POINT('',#4304);+#4304 = CARTESIAN_POINT('',(0.,3.425983916501,0.193144044696));+#4305 = SURFACE_CURVE('',#4306,(#4310,#4317),.PCURVE_S1.);+#4306 = LINE('',#4307,#4308);+#4307 = CARTESIAN_POINT('',(0.,3.345983916503,0.193144044696));+#4308 = VECTOR('',#4309,1.);+#4309 = DIRECTION('',(0.,1.,0.));+#4310 = PCURVE('',#140,#4311);+#4311 = DEFINITIONAL_REPRESENTATION('',(#4312),#4316);+#4312 = LINE('',#4313,#4314);+#4313 = CARTESIAN_POINT('',(1.154016083497,0.193144044696));+#4314 = VECTOR('',#4315,1.);+#4315 = DIRECTION('',(-1.,0.));+#4316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4317 = PCURVE('',#4318,#4323);+#4318 = PLANE('',#4319);+#4319 = AXIS2_PLACEMENT_3D('',#4320,#4321,#4322);+#4320 = CARTESIAN_POINT('',(0.668982239989,3.350961726702,0.193144044696+    ));+#4321 = DIRECTION('',(0.,0.,1.));+#4322 = DIRECTION('',(1.,0.,-0.));+#4323 = DEFINITIONAL_REPRESENTATION('',(#4324),#4328);+#4324 = LINE('',#4325,#4326);+#4325 = CARTESIAN_POINT('',(-0.668982239989,-4.977810199E-03));+#4326 = VECTOR('',#4327,1.);+#4327 = DIRECTION('',(0.,1.));+#4328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4329 = ORIENTED_EDGE('',*,*,#4330,.T.);+#4330 = EDGE_CURVE('',#4303,#4331,#4333,.T.);+#4331 = VERTEX_POINT('',#4332);+#4332 = CARTESIAN_POINT('',(0.,3.425983916501,9.314404469578E-02));+#4333 = SURFACE_CURVE('',#4334,(#4338,#4345),.PCURVE_S1.);+#4334 = LINE('',#4335,#4336);+#4335 = CARTESIAN_POINT('',(0.,3.425983916501,0.193144044696));+#4336 = VECTOR('',#4337,1.);+#4337 = DIRECTION('',(0.,0.,-1.));+#4338 = PCURVE('',#140,#4339);+#4339 = DEFINITIONAL_REPRESENTATION('',(#4340),#4344);+#4340 = LINE('',#4341,#4342);+#4341 = CARTESIAN_POINT('',(1.074016083499,0.193144044696));+#4342 = VECTOR('',#4343,1.);+#4343 = DIRECTION('',(0.,-1.));+#4344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4345 = PCURVE('',#4346,#4351);+#4346 = PLANE('',#4347);+#4347 = AXIS2_PLACEMENT_3D('',#4348,#4349,#4350);+#4348 = CARTESIAN_POINT('',(5.925868158323E-02,3.425983916501,+    0.193144044696));+#4349 = DIRECTION('',(0.,-1.,0.));+#4350 = DIRECTION('',(-1.,0.,0.));+#4351 = DEFINITIONAL_REPRESENTATION('',(#4352),#4356);+#4352 = LINE('',#4353,#4354);+#4353 = CARTESIAN_POINT('',(5.925868158323E-02,0.));+#4354 = VECTOR('',#4355,1.);+#4355 = DIRECTION('',(0.,1.));+#4356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4357 = ORIENTED_EDGE('',*,*,#4358,.T.);+#4358 = EDGE_CURVE('',#4331,#4359,#4361,.T.);+#4359 = VERTEX_POINT('',#4360);+#4360 = CARTESIAN_POINT('',(0.,3.475943712833,9.314404469578E-02));+#4361 = SURFACE_CURVE('',#4362,(#4366,#4373),.PCURVE_S1.);+#4362 = LINE('',#4363,#4364);+#4363 = CARTESIAN_POINT('',(0.,3.425983916501,9.314404469578E-02));+#4364 = VECTOR('',#4365,1.);+#4365 = DIRECTION('',(0.,1.,0.));+#4366 = PCURVE('',#140,#4367);+#4367 = DEFINITIONAL_REPRESENTATION('',(#4368),#4372);+#4368 = LINE('',#4369,#4370);+#4369 = CARTESIAN_POINT('',(1.074016083499,9.314404469578E-02));+#4370 = VECTOR('',#4371,1.);+#4371 = DIRECTION('',(-1.,0.));+#4372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4373 = PCURVE('',#4262,#4374);+#4374 = DEFINITIONAL_REPRESENTATION('',(#4375),#4379);+#4375 = LINE('',#4376,#4377);+#4376 = CARTESIAN_POINT('',(-0.417539932793,4.029125469E-02));+#4377 = VECTOR('',#4378,1.);+#4378 = DIRECTION('',(0.,1.));+#4379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4380 = ORIENTED_EDGE('',*,*,#4381,.F.);+#4381 = EDGE_CURVE('',#2536,#4359,#4382,.T.);+#4382 = SURFACE_CURVE('',#4383,(#4387,#4394),.PCURVE_S1.);+#4383 = LINE('',#4384,#4385);+#4384 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#4385 = VECTOR('',#4386,1.);+#4386 = DIRECTION('',(0.,0.,1.));+#4387 = PCURVE('',#140,#4388);+#4388 = DEFINITIONAL_REPRESENTATION('',(#4389),#4393);+#4389 = LINE('',#4390,#4391);+#4390 = CARTESIAN_POINT('',(1.024056287167,0.));+#4391 = VECTOR('',#4392,1.);+#4392 = DIRECTION('',(0.,1.));+#4393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4394 = PCURVE('',#2574,#4395);+#4395 = DEFINITIONAL_REPRESENTATION('',(#4396),#4400);+#4396 = LINE('',#4397,#4398);+#4397 = CARTESIAN_POINT('',(5.936627694815E-04,9.314404469578E-02));+#4398 = VECTOR('',#4399,1.);+#4399 = DIRECTION('',(0.,-1.));+#4400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4401 = ORIENTED_EDGE('',*,*,#2535,.T.);+#4402 = ORIENTED_EDGE('',*,*,#4403,.T.);+#4403 = EDGE_CURVE('',#2508,#4404,#4406,.T.);+#4404 = VERTEX_POINT('',#4405);+#4405 = CARTESIAN_POINT('',(0.,4.04544161631,9.314404469578E-02));+#4406 = SURFACE_CURVE('',#4407,(#4411,#4418),.PCURVE_S1.);+#4407 = LINE('',#4408,#4409);+#4408 = CARTESIAN_POINT('',(0.,4.04544161631,0.));+#4409 = VECTOR('',#4410,1.);+#4410 = DIRECTION('',(0.,0.,1.));+#4411 = PCURVE('',#140,#4412);+#4412 = DEFINITIONAL_REPRESENTATION('',(#4413),#4417);+#4413 = LINE('',#4414,#4415);+#4414 = CARTESIAN_POINT('',(0.45455838369,0.));+#4415 = VECTOR('',#4416,1.);+#4416 = DIRECTION('',(0.,1.));+#4417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4418 = PCURVE('',#2523,#4419);+#4419 = DEFINITIONAL_REPRESENTATION('',(#4420),#4424);+#4420 = LINE('',#4421,#4422);+#4421 = CARTESIAN_POINT('',(5.936554721189E-04,-9.314404469578E-02));+#4422 = VECTOR('',#4423,1.);+#4423 = DIRECTION('',(0.,1.));+#4424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4425 = ORIENTED_EDGE('',*,*,#4426,.T.);+#4426 = EDGE_CURVE('',#4404,#4427,#4429,.T.);+#4427 = VERTEX_POINT('',#4428);+#4428 = CARTESIAN_POINT('',(0.,4.095983918047,9.314404469578E-02));+#4429 = SURFACE_CURVE('',#4430,(#4434,#4441),.PCURVE_S1.);+#4430 = LINE('',#4431,#4432);+#4431 = CARTESIAN_POINT('',(0.,4.04544161631,9.314404469578E-02));+#4432 = VECTOR('',#4433,1.);+#4433 = DIRECTION('',(0.,1.,0.));+#4434 = PCURVE('',#140,#4435);+#4435 = DEFINITIONAL_REPRESENTATION('',(#4436),#4440);+#4436 = LINE('',#4437,#4438);+#4437 = CARTESIAN_POINT('',(0.45455838369,9.314404469578E-02));+#4438 = VECTOR('',#4439,1.);+#4439 = DIRECTION('',(-1.,0.));+#4440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4441 = PCURVE('',#4442,#4447);+#4442 = PLANE('',#4443);+#4443 = AXIS2_PLACEMENT_3D('',#4444,#4445,#4446);+#4444 = CARTESIAN_POINT('',(0.457146247734,4.201757054108,+    9.314404469578E-02));+#4445 = DIRECTION('',(0.,0.,1.));+#4446 = DIRECTION('',(1.,0.,-0.));+#4447 = DEFINITIONAL_REPRESENTATION('',(#4448),#4452);+#4448 = LINE('',#4449,#4450);+#4449 = CARTESIAN_POINT('',(-0.457146247734,-0.156315437798));+#4450 = VECTOR('',#4451,1.);+#4451 = DIRECTION('',(0.,1.));+#4452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4453 = ORIENTED_EDGE('',*,*,#4454,.F.);+#4454 = EDGE_CURVE('',#4455,#4427,#4457,.T.);+#4455 = VERTEX_POINT('',#4456);+#4456 = CARTESIAN_POINT('',(0.,4.095983918047,0.193144044696));+#4457 = SURFACE_CURVE('',#4458,(#4462,#4469),.PCURVE_S1.);+#4458 = LINE('',#4459,#4460);+#4459 = CARTESIAN_POINT('',(0.,4.095983918047,0.193144044696));+#4460 = VECTOR('',#4461,1.);+#4461 = DIRECTION('',(0.,0.,-1.));+#4462 = PCURVE('',#140,#4463);+#4463 = DEFINITIONAL_REPRESENTATION('',(#4464),#4468);+#4464 = LINE('',#4465,#4466);+#4465 = CARTESIAN_POINT('',(0.404016081953,0.193144044696));+#4466 = VECTOR('',#4467,1.);+#4467 = DIRECTION('',(0.,-1.));+#4468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4469 = PCURVE('',#4470,#4475);+#4470 = PLANE('',#4471);+#4471 = AXIS2_PLACEMENT_3D('',#4472,#4473,#4474);+#4472 = CARTESIAN_POINT('',(-7.574131511552E-02,4.095983918047,+    0.193144044696));+#4473 = DIRECTION('',(0.,1.,0.));+#4474 = DIRECTION('',(1.,0.,0.));+#4475 = DEFINITIONAL_REPRESENTATION('',(#4476),#4480);+#4476 = LINE('',#4477,#4478);+#4477 = CARTESIAN_POINT('',(7.574131511552E-02,0.));+#4478 = VECTOR('',#4479,1.);+#4479 = DIRECTION('',(0.,1.));+#4480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4481 = ORIENTED_EDGE('',*,*,#4482,.F.);+#4482 = EDGE_CURVE('',#4483,#4455,#4485,.T.);+#4483 = VERTEX_POINT('',#4484);+#4484 = CARTESIAN_POINT('',(0.,4.175983918045,0.193144044696));+#4485 = SURFACE_CURVE('',#4486,(#4490,#4497),.PCURVE_S1.);+#4486 = LINE('',#4487,#4488);+#4487 = CARTESIAN_POINT('',(0.,4.175983918045,0.193144044696));+#4488 = VECTOR('',#4489,1.);+#4489 = DIRECTION('',(0.,-1.,0.));+#4490 = PCURVE('',#140,#4491);+#4491 = DEFINITIONAL_REPRESENTATION('',(#4492),#4496);+#4492 = LINE('',#4493,#4494);+#4493 = CARTESIAN_POINT('',(0.324016081955,0.193144044696));+#4494 = VECTOR('',#4495,1.);+#4495 = DIRECTION('',(1.,0.));+#4496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4497 = PCURVE('',#4498,#4503);+#4498 = PLANE('',#4499);+#4499 = AXIS2_PLACEMENT_3D('',#4500,#4501,#4502);+#4500 = CARTESIAN_POINT('',(0.701675974295,4.003933868083,0.193144044696+    ));+#4501 = DIRECTION('',(0.,0.,1.));+#4502 = DIRECTION('',(1.,0.,-0.));+#4503 = DEFINITIONAL_REPRESENTATION('',(#4504),#4508);+#4504 = LINE('',#4505,#4506);+#4505 = CARTESIAN_POINT('',(-0.701675974295,0.172050049962));+#4506 = VECTOR('',#4507,1.);+#4507 = DIRECTION('',(0.,-1.));+#4508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4509 = ORIENTED_EDGE('',*,*,#4510,.T.);+#4510 = EDGE_CURVE('',#4483,#4511,#4513,.T.);+#4511 = VERTEX_POINT('',#4512);+#4512 = CARTESIAN_POINT('',(0.,4.175983918045,9.314404469578E-02));+#4513 = SURFACE_CURVE('',#4514,(#4518,#4525),.PCURVE_S1.);+#4514 = LINE('',#4515,#4516);+#4515 = CARTESIAN_POINT('',(0.,4.175983918045,0.193144044696));+#4516 = VECTOR('',#4517,1.);+#4517 = DIRECTION('',(0.,0.,-1.));+#4518 = PCURVE('',#140,#4519);+#4519 = DEFINITIONAL_REPRESENTATION('',(#4520),#4524);+#4520 = LINE('',#4521,#4522);+#4521 = CARTESIAN_POINT('',(0.324016081955,0.193144044696));+#4522 = VECTOR('',#4523,1.);+#4523 = DIRECTION('',(0.,-1.));+#4524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4525 = PCURVE('',#4526,#4531);+#4526 = PLANE('',#4527);+#4527 = AXIS2_PLACEMENT_3D('',#4528,#4529,#4530);+#4528 = CARTESIAN_POINT('',(5.92586848938E-02,4.175983918045,+    0.193144044696));+#4529 = DIRECTION('',(0.,-1.,0.));+#4530 = DIRECTION('',(-1.,0.,0.));+#4531 = DEFINITIONAL_REPRESENTATION('',(#4532),#4536);+#4532 = LINE('',#4533,#4534);+#4533 = CARTESIAN_POINT('',(5.92586848938E-02,0.));+#4534 = VECTOR('',#4535,1.);+#4535 = DIRECTION('',(0.,1.));+#4536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4537 = ORIENTED_EDGE('',*,*,#4538,.T.);+#4538 = EDGE_CURVE('',#4511,#4539,#4541,.T.);+#4539 = VERTEX_POINT('',#4540);+#4540 = CARTESIAN_POINT('',(0.,4.225943709765,9.314404469578E-02));+#4541 = SURFACE_CURVE('',#4542,(#4546,#4553),.PCURVE_S1.);+#4542 = LINE('',#4543,#4544);+#4543 = CARTESIAN_POINT('',(0.,4.175983918045,9.314404469578E-02));+#4544 = VECTOR('',#4545,1.);+#4545 = DIRECTION('',(0.,1.,0.));+#4546 = PCURVE('',#140,#4547);+#4547 = DEFINITIONAL_REPRESENTATION('',(#4548),#4552);+#4548 = LINE('',#4549,#4550);+#4549 = CARTESIAN_POINT('',(0.324016081955,9.314404469578E-02));+#4550 = VECTOR('',#4551,1.);+#4551 = DIRECTION('',(-1.,0.));+#4552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4553 = PCURVE('',#4442,#4554);+#4554 = DEFINITIONAL_REPRESENTATION('',(#4555),#4559);+#4555 = LINE('',#4556,#4557);+#4556 = CARTESIAN_POINT('',(-0.457146247734,-2.5773136063E-02));+#4557 = VECTOR('',#4558,1.);+#4558 = DIRECTION('',(0.,1.));+#4559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4560 = ORIENTED_EDGE('',*,*,#4561,.F.);+#4561 = EDGE_CURVE('',#2289,#4539,#4562,.T.);+#4562 = SURFACE_CURVE('',#4563,(#4567,#4574),.PCURVE_S1.);+#4563 = LINE('',#4564,#4565);+#4564 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#4565 = VECTOR('',#4566,1.);+#4566 = DIRECTION('',(0.,0.,1.));+#4567 = PCURVE('',#140,#4568);+#4568 = DEFINITIONAL_REPRESENTATION('',(#4569),#4573);+#4569 = LINE('',#4570,#4571);+#4570 = CARTESIAN_POINT('',(0.274056290235,0.));+#4571 = VECTOR('',#4572,1.);+#4572 = DIRECTION('',(0.,1.));+#4573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4574 = PCURVE('',#2327,#4575);+#4575 = DEFINITIONAL_REPRESENTATION('',(#4576),#4580);+#4576 = LINE('',#4577,#4578);+#4577 = CARTESIAN_POINT('',(5.936554721189E-04,9.314404469578E-02));+#4578 = VECTOR('',#4579,1.);+#4579 = DIRECTION('',(0.,-1.));+#4580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4581 = ORIENTED_EDGE('',*,*,#2288,.T.);+#4582 = ORIENTED_EDGE('',*,*,#4583,.F.);+#4583 = EDGE_CURVE('',#125,#2266,#4584,.T.);+#4584 = SURFACE_CURVE('',#4585,(#4589,#4596),.PCURVE_S1.);+#4585 = LINE('',#4586,#4587);+#4586 = CARTESIAN_POINT('',(0.,4.5,1.9));+#4587 = VECTOR('',#4588,1.);+#4588 = DIRECTION('',(0.,0.,-1.));+#4589 = PCURVE('',#140,#4590);+#4590 = DEFINITIONAL_REPRESENTATION('',(#4591),#4595);+#4591 = LINE('',#4592,#4593);+#4592 = CARTESIAN_POINT('',(0.,1.9));+#4593 = VECTOR('',#4594,1.);+#4594 = DIRECTION('',(0.,-1.));+#4595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4596 = PCURVE('',#168,#4597);+#4597 = DEFINITIONAL_REPRESENTATION('',(#4598),#4602);+#4598 = LINE('',#4599,#4600);+#4599 = CARTESIAN_POINT('',(3.5,1.9));+#4600 = VECTOR('',#4601,1.);+#4601 = DIRECTION('',(0.,-1.));+#4602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4603 = ORIENTED_EDGE('',*,*,#124,.F.);+#4604 = ORIENTED_EDGE('',*,*,#239,.T.);+#4605 = ORIENTED_EDGE('',*,*,#3212,.T.);+#4606 = ORIENTED_EDGE('',*,*,#4607,.T.);+#4607 = EDGE_CURVE('',#3185,#4608,#4610,.T.);+#4608 = VERTEX_POINT('',#4609);+#4609 = CARTESIAN_POINT('',(0.,0.345441613228,9.314404469578E-02));+#4610 = SURFACE_CURVE('',#4611,(#4615,#4622),.PCURVE_S1.);+#4611 = LINE('',#4612,#4613);+#4612 = CARTESIAN_POINT('',(0.,0.345441613228,0.));+#4613 = VECTOR('',#4614,1.);+#4614 = DIRECTION('',(0.,0.,1.));+#4615 = PCURVE('',#140,#4616);+#4616 = DEFINITIONAL_REPRESENTATION('',(#4617),#4621);+#4617 = LINE('',#4618,#4619);+#4618 = CARTESIAN_POINT('',(4.154558386772,0.));+#4619 = VECTOR('',#4620,1.);+#4620 = DIRECTION('',(0.,1.));+#4621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4622 = PCURVE('',#3200,#4623);+#4623 = DEFINITIONAL_REPRESENTATION('',(#4624),#4628);+#4624 = LINE('',#4625,#4626);+#4625 = CARTESIAN_POINT('',(8.217107131147E-02,9.314404469578E-02));+#4626 = VECTOR('',#4627,1.);+#4627 = DIRECTION('',(0.,-1.));+#4628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4629 = ORIENTED_EDGE('',*,*,#4630,.T.);+#4630 = EDGE_CURVE('',#4608,#4631,#4633,.T.);+#4631 = VERTEX_POINT('',#4632);+#4632 = CARTESIAN_POINT('',(0.,0.395983918053,9.314404469578E-02));+#4633 = SURFACE_CURVE('',#4634,(#4638,#4645),.PCURVE_S1.);+#4634 = LINE('',#4635,#4636);+#4635 = CARTESIAN_POINT('',(0.,0.345441613228,9.314404469578E-02));+#4636 = VECTOR('',#4637,1.);+#4637 = DIRECTION('',(0.,1.,0.));+#4638 = PCURVE('',#140,#4639);+#4639 = DEFINITIONAL_REPRESENTATION('',(#4640),#4644);+#4640 = LINE('',#4641,#4642);+#4641 = CARTESIAN_POINT('',(4.154558386772,9.314404469578E-02));+#4642 = VECTOR('',#4643,1.);+#4643 = DIRECTION('',(-1.,0.));+#4644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4645 = PCURVE('',#4229,#4646);+#4646 = DEFINITIONAL_REPRESENTATION('',(#4647),#4651);+#4647 = LINE('',#4648,#4649);+#4648 = CARTESIAN_POINT('',(-0.594729450677,-0.88101485576));+#4649 = VECTOR('',#4650,1.);+#4650 = DIRECTION('',(0.,1.));+#4651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4652 = ORIENTED_EDGE('',*,*,#4653,.F.);+#4653 = EDGE_CURVE('',#4654,#4631,#4656,.T.);+#4654 = VERTEX_POINT('',#4655);+#4655 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#4656 = SURFACE_CURVE('',#4657,(#4661,#4668),.PCURVE_S1.);+#4657 = LINE('',#4658,#4659);+#4658 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#4659 = VECTOR('',#4660,1.);+#4660 = DIRECTION('',(0.,0.,-1.));+#4661 = PCURVE('',#140,#4662);+#4662 = DEFINITIONAL_REPRESENTATION('',(#4663),#4667);+#4663 = LINE('',#4664,#4665);+#4664 = CARTESIAN_POINT('',(4.104016081947,0.193144044696));+#4665 = VECTOR('',#4666,1.);+#4666 = DIRECTION('',(0.,-1.));+#4667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4668 = PCURVE('',#4669,#4674);+#4669 = PLANE('',#4670);+#4670 = AXIS2_PLACEMENT_3D('',#4671,#4672,#4673);+#4671 = CARTESIAN_POINT('',(-7.574131513371E-02,0.395983918053,+    0.193144044696));+#4672 = DIRECTION('',(0.,1.,0.));+#4673 = DIRECTION('',(1.,0.,0.));+#4674 = DEFINITIONAL_REPRESENTATION('',(#4675),#4679);+#4675 = LINE('',#4676,#4677);+#4676 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#4677 = VECTOR('',#4678,1.);+#4678 = DIRECTION('',(0.,1.));+#4679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4680 = ORIENTED_EDGE('',*,*,#4681,.T.);+#4681 = EDGE_CURVE('',#4654,#4682,#4684,.T.);+#4682 = VERTEX_POINT('',#4683);+#4683 = CARTESIAN_POINT('',(0.,0.475983918055,0.193144044696));+#4684 = SURFACE_CURVE('',#4685,(#4689,#4696),.PCURVE_S1.);+#4685 = LINE('',#4686,#4687);+#4686 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#4687 = VECTOR('',#4688,1.);+#4688 = DIRECTION('',(0.,1.,0.));+#4689 = PCURVE('',#140,#4690);+#4690 = DEFINITIONAL_REPRESENTATION('',(#4691),#4695);+#4691 = LINE('',#4692,#4693);+#4692 = CARTESIAN_POINT('',(4.104016081947,0.193144044696));+#4693 = VECTOR('',#4694,1.);+#4694 = DIRECTION('',(-1.,0.));+#4695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4696 = PCURVE('',#4697,#4702);+#4697 = PLANE('',#4698);+#4698 = AXIS2_PLACEMENT_3D('',#4699,#4700,#4701);+#4699 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+    ));+#4700 = DIRECTION('',(0.,0.,1.));+#4701 = DIRECTION('',(1.,0.,-0.));+#4702 = DEFINITIONAL_REPRESENTATION('',(#4703),#4707);+#4703 = LINE('',#4704,#4705);+#4704 = CARTESIAN_POINT('',(-0.687763226012,-0.855292602749));+#4705 = VECTOR('',#4706,1.);+#4706 = DIRECTION('',(0.,1.));+#4707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4708 = ORIENTED_EDGE('',*,*,#4709,.T.);+#4709 = EDGE_CURVE('',#4682,#4710,#4712,.T.);+#4710 = VERTEX_POINT('',#4711);+#4711 = CARTESIAN_POINT('',(0.,0.475983918055,9.314404469578E-02));+#4712 = SURFACE_CURVE('',#4713,(#4717,#4724),.PCURVE_S1.);+#4713 = LINE('',#4714,#4715);+#4714 = CARTESIAN_POINT('',(0.,0.475983918055,0.193144044696));+#4715 = VECTOR('',#4716,1.);+#4716 = DIRECTION('',(0.,0.,-1.));+#4717 = PCURVE('',#140,#4718);+#4718 = DEFINITIONAL_REPRESENTATION('',(#4719),#4723);+#4719 = LINE('',#4720,#4721);+#4720 = CARTESIAN_POINT('',(4.024016081945,0.193144044696));+#4721 = VECTOR('',#4722,1.);+#4722 = DIRECTION('',(0.,-1.));+#4723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4724 = PCURVE('',#4725,#4730);+#4725 = PLANE('',#4726);+#4726 = AXIS2_PLACEMENT_3D('',#4727,#4728,#4729);+#4727 = CARTESIAN_POINT('',(5.92586848756E-02,0.475983918055,+    0.193144044696));+#4728 = DIRECTION('',(0.,-1.,0.));+#4729 = DIRECTION('',(-1.,0.,0.));+#4730 = DEFINITIONAL_REPRESENTATION('',(#4731),#4735);+#4731 = LINE('',#4732,#4733);+#4732 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#4733 = VECTOR('',#4734,1.);+#4734 = DIRECTION('',(0.,1.));+#4735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4736 = ORIENTED_EDGE('',*,*,#4737,.T.);+#4737 = EDGE_CURVE('',#4710,#4738,#4740,.T.);+#4738 = VERTEX_POINT('',#4739);+#4739 = CARTESIAN_POINT('',(0.,0.525943709769,9.314404469578E-02));+#4740 = SURFACE_CURVE('',#4741,(#4745,#4752),.PCURVE_S1.);+#4741 = LINE('',#4742,#4743);+#4742 = CARTESIAN_POINT('',(0.,0.475983918055,9.314404469578E-02));+#4743 = VECTOR('',#4744,1.);+#4744 = DIRECTION('',(0.,1.,0.));+#4745 = PCURVE('',#140,#4746);+#4746 = DEFINITIONAL_REPRESENTATION('',(#4747),#4751);+#4747 = LINE('',#4748,#4749);+#4748 = CARTESIAN_POINT('',(4.024016081945,9.314404469578E-02));+#4749 = VECTOR('',#4750,1.);+#4750 = DIRECTION('',(-1.,0.));+#4751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4752 = PCURVE('',#4229,#4753);+#4753 = DEFINITIONAL_REPRESENTATION('',(#4754),#4758);+#4754 = LINE('',#4755,#4756);+#4755 = CARTESIAN_POINT('',(-0.594729450677,-0.750472550933));+#4756 = VECTOR('',#4757,1.);+#4757 = DIRECTION('',(0.,1.));+#4758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4759 = ORIENTED_EDGE('',*,*,#4760,.F.);+#4760 = EDGE_CURVE('',#947,#4738,#4761,.T.);+#4761 = SURFACE_CURVE('',#4762,(#4766,#4773),.PCURVE_S1.);+#4762 = LINE('',#4763,#4764);+#4763 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#4764 = VECTOR('',#4765,1.);+#4765 = DIRECTION('',(0.,0.,1.));+#4766 = PCURVE('',#140,#4767);+#4767 = DEFINITIONAL_REPRESENTATION('',(#4768),#4772);+#4768 = LINE('',#4769,#4770);+#4769 = CARTESIAN_POINT('',(3.974056290231,0.));+#4770 = VECTOR('',#4771,1.);+#4771 = DIRECTION('',(0.,1.));+#4772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4773 = PCURVE('',#985,#4774);+#4774 = DEFINITIONAL_REPRESENTATION('',(#4775),#4779);+#4775 = LINE('',#4776,#4777);+#4776 = CARTESIAN_POINT('',(5.936554721235E-04,9.314404469578E-02));+#4777 = VECTOR('',#4778,1.);+#4778 = DIRECTION('',(0.,-1.));+#4779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4780 = ORIENTED_EDGE('',*,*,#946,.T.);+#4781 = ORIENTED_EDGE('',*,*,#4782,.T.);+#4782 = EDGE_CURVE('',#919,#4783,#4785,.T.);+#4783 = VERTEX_POINT('',#4784);+#4784 = CARTESIAN_POINT('',(0.,0.84544161632,9.314404469578E-02));+#4785 = SURFACE_CURVE('',#4786,(#4790,#4797),.PCURVE_S1.);+#4786 = LINE('',#4787,#4788);+#4787 = CARTESIAN_POINT('',(0.,0.84544161632,0.));+#4788 = VECTOR('',#4789,1.);+#4789 = DIRECTION('',(0.,0.,1.));+#4790 = PCURVE('',#140,#4791);+#4791 = DEFINITIONAL_REPRESENTATION('',(#4792),#4796);+#4792 = LINE('',#4793,#4794);+#4793 = CARTESIAN_POINT('',(3.65455838368,0.));+#4794 = VECTOR('',#4795,1.);+#4795 = DIRECTION('',(0.,1.));+#4796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4797 = PCURVE('',#934,#4798);+#4798 = DEFINITIONAL_REPRESENTATION('',(#4799),#4803);+#4799 = LINE('',#4800,#4801);+#4800 = CARTESIAN_POINT('',(5.936481650359E-04,-9.314404469578E-02));+#4801 = VECTOR('',#4802,1.);+#4802 = DIRECTION('',(0.,1.));+#4803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4804 = ORIENTED_EDGE('',*,*,#4805,.T.);+#4805 = EDGE_CURVE('',#4783,#4806,#4808,.T.);+#4806 = VERTEX_POINT('',#4807);+#4807 = CARTESIAN_POINT('',(0.,0.89598391805,9.314404469578E-02));+#4808 = SURFACE_CURVE('',#4809,(#4813,#4820),.PCURVE_S1.);+#4809 = LINE('',#4810,#4811);+#4810 = CARTESIAN_POINT('',(0.,0.84544161632,9.314404469578E-02));+#4811 = VECTOR('',#4812,1.);+#4812 = DIRECTION('',(0.,1.,0.));+#4813 = PCURVE('',#140,#4814);+#4814 = DEFINITIONAL_REPRESENTATION('',(#4815),#4819);+#4815 = LINE('',#4816,#4817);+#4816 = CARTESIAN_POINT('',(3.65455838368,9.314404469578E-02));+#4817 = VECTOR('',#4818,1.);+#4818 = DIRECTION('',(-1.,0.));+#4819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4820 = PCURVE('',#4229,#4821);+#4821 = DEFINITIONAL_REPRESENTATION('',(#4822),#4826);+#4822 = LINE('',#4823,#4824);+#4823 = CARTESIAN_POINT('',(-0.594729450677,-0.381014852668));+#4824 = VECTOR('',#4825,1.);+#4825 = DIRECTION('',(0.,1.));+#4826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4827 = ORIENTED_EDGE('',*,*,#4828,.F.);+#4828 = EDGE_CURVE('',#4829,#4806,#4831,.T.);+#4829 = VERTEX_POINT('',#4830);+#4830 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#4831 = SURFACE_CURVE('',#4832,(#4836,#4843),.PCURVE_S1.);+#4832 = LINE('',#4833,#4834);+#4833 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#4834 = VECTOR('',#4835,1.);+#4835 = DIRECTION('',(0.,0.,-1.));+#4836 = PCURVE('',#140,#4837);+#4837 = DEFINITIONAL_REPRESENTATION('',(#4838),#4842);+#4838 = LINE('',#4839,#4840);+#4839 = CARTESIAN_POINT('',(3.60401608195,0.193144044696));+#4840 = VECTOR('',#4841,1.);+#4841 = DIRECTION('',(0.,-1.));+#4842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4843 = PCURVE('',#4844,#4849);+#4844 = PLANE('',#4845);+#4845 = AXIS2_PLACEMENT_3D('',#4846,#4847,#4848);+#4846 = CARTESIAN_POINT('',(-7.574131513371E-02,0.89598391805,+    0.193144044696));+#4847 = DIRECTION('',(0.,1.,0.));+#4848 = DIRECTION('',(1.,0.,0.));+#4849 = DEFINITIONAL_REPRESENTATION('',(#4850),#4854);+#4850 = LINE('',#4851,#4852);+#4851 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#4852 = VECTOR('',#4853,1.);+#4853 = DIRECTION('',(0.,1.));+#4854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4855 = ORIENTED_EDGE('',*,*,#4856,.T.);+#4856 = EDGE_CURVE('',#4829,#4857,#4859,.T.);+#4857 = VERTEX_POINT('',#4858);+#4858 = CARTESIAN_POINT('',(0.,0.975983918052,0.193144044696));+#4859 = SURFACE_CURVE('',#4860,(#4864,#4871),.PCURVE_S1.);+#4860 = LINE('',#4861,#4862);+#4861 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#4862 = VECTOR('',#4863,1.);+#4863 = DIRECTION('',(0.,1.,0.));+#4864 = PCURVE('',#140,#4865);+#4865 = DEFINITIONAL_REPRESENTATION('',(#4866),#4870);+#4866 = LINE('',#4867,#4868);+#4867 = CARTESIAN_POINT('',(3.60401608195,0.193144044696));+#4868 = VECTOR('',#4869,1.);+#4869 = DIRECTION('',(-1.,0.));+#4870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4871 = PCURVE('',#4872,#4877);+#4872 = PLANE('',#4873);+#4873 = AXIS2_PLACEMENT_3D('',#4874,#4875,#4876);+#4874 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+    ));+#4875 = DIRECTION('',(0.,0.,1.));+#4876 = DIRECTION('',(1.,0.,-0.));+#4877 = DEFINITIONAL_REPRESENTATION('',(#4878),#4882);+#4878 = LINE('',#4879,#4880);+#4879 = CARTESIAN_POINT('',(-0.687763226012,-0.355292602752));+#4880 = VECTOR('',#4881,1.);+#4881 = DIRECTION('',(0.,1.));+#4882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4883 = ORIENTED_EDGE('',*,*,#4884,.T.);+#4884 = EDGE_CURVE('',#4857,#4885,#4887,.T.);+#4885 = VERTEX_POINT('',#4886);+#4886 = CARTESIAN_POINT('',(0.,0.975983918052,9.314404469578E-02));+#4887 = SURFACE_CURVE('',#4888,(#4892,#4899),.PCURVE_S1.);+#4888 = LINE('',#4889,#4890);+#4889 = CARTESIAN_POINT('',(0.,0.975983918052,0.193144044696));+#4890 = VECTOR('',#4891,1.);+#4891 = DIRECTION('',(0.,0.,-1.));+#4892 = PCURVE('',#140,#4893);+#4893 = DEFINITIONAL_REPRESENTATION('',(#4894),#4898);+#4894 = LINE('',#4895,#4896);+#4895 = CARTESIAN_POINT('',(3.524016081948,0.193144044696));+#4896 = VECTOR('',#4897,1.);+#4897 = DIRECTION('',(0.,-1.));+#4898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4899 = PCURVE('',#4900,#4905);+#4900 = PLANE('',#4901);+#4901 = AXIS2_PLACEMENT_3D('',#4902,#4903,#4904);+#4902 = CARTESIAN_POINT('',(5.92586848756E-02,0.975983918052,+    0.193144044696));+#4903 = DIRECTION('',(0.,-1.,0.));+#4904 = DIRECTION('',(-1.,0.,0.));+#4905 = DEFINITIONAL_REPRESENTATION('',(#4906),#4910);+#4906 = LINE('',#4907,#4908);+#4907 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#4908 = VECTOR('',#4909,1.);+#4909 = DIRECTION('',(0.,1.));+#4910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4911 = ORIENTED_EDGE('',*,*,#4912,.T.);+#4912 = EDGE_CURVE('',#4885,#4913,#4915,.T.);+#4913 = VERTEX_POINT('',#4914);+#4914 = CARTESIAN_POINT('',(0.,1.025943709769,9.314404469578E-02));+#4915 = SURFACE_CURVE('',#4916,(#4920,#4927),.PCURVE_S1.);+#4916 = LINE('',#4917,#4918);+#4917 = CARTESIAN_POINT('',(0.,0.975983918052,9.314404469578E-02));+#4918 = VECTOR('',#4919,1.);+#4919 = DIRECTION('',(0.,1.,0.));+#4920 = PCURVE('',#140,#4921);+#4921 = DEFINITIONAL_REPRESENTATION('',(#4922),#4926);+#4922 = LINE('',#4923,#4924);+#4923 = CARTESIAN_POINT('',(3.524016081948,9.314404469578E-02));+#4924 = VECTOR('',#4925,1.);+#4925 = DIRECTION('',(-1.,0.));+#4926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4927 = PCURVE('',#4229,#4928);+#4928 = DEFINITIONAL_REPRESENTATION('',(#4929),#4933);+#4929 = LINE('',#4930,#4931);+#4930 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550936));+#4931 = VECTOR('',#4932,1.);+#4932 = DIRECTION('',(0.,1.));+#4933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4934 = ORIENTED_EDGE('',*,*,#4935,.F.);+#4935 = EDGE_CURVE('',#720,#4913,#4936,.T.);+#4936 = SURFACE_CURVE('',#4937,(#4941,#4948),.PCURVE_S1.);+#4937 = LINE('',#4938,#4939);+#4938 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#4939 = VECTOR('',#4940,1.);+#4940 = DIRECTION('',(0.,0.,1.));+#4941 = PCURVE('',#140,#4942);+#4942 = DEFINITIONAL_REPRESENTATION('',(#4943),#4947);+#4943 = LINE('',#4944,#4945);+#4944 = CARTESIAN_POINT('',(3.474056290231,0.));+#4945 = VECTOR('',#4946,1.);+#4946 = DIRECTION('',(0.,1.));+#4947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4948 = PCURVE('',#758,#4949);+#4949 = DEFINITIONAL_REPRESENTATION('',(#4950),#4954);+#4950 = LINE('',#4951,#4952);+#4951 = CARTESIAN_POINT('',(5.936554721229E-04,9.314404469578E-02));+#4952 = VECTOR('',#4953,1.);+#4953 = DIRECTION('',(0.,-1.));+#4954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4955 = ORIENTED_EDGE('',*,*,#719,.T.);+#4956 = ORIENTED_EDGE('',*,*,#4957,.T.);+#4957 = EDGE_CURVE('',#687,#4958,#4960,.T.);+#4958 = VERTEX_POINT('',#4959);+#4959 = CARTESIAN_POINT('',(0.,1.345441613228,9.314404469578E-02));+#4960 = SURFACE_CURVE('',#4961,(#4965,#4972),.PCURVE_S1.);+#4961 = LINE('',#4962,#4963);+#4962 = CARTESIAN_POINT('',(0.,1.345441613228,0.));+#4963 = VECTOR('',#4964,1.);+#4964 = DIRECTION('',(0.,0.,1.));+#4965 = PCURVE('',#140,#4966);+#4966 = DEFINITIONAL_REPRESENTATION('',(#4967),#4971);+#4967 = LINE('',#4968,#4969);+#4968 = CARTESIAN_POINT('',(3.154558386772,0.));+#4969 = VECTOR('',#4970,1.);+#4970 = DIRECTION('',(0.,1.));+#4971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4972 = PCURVE('',#707,#4973);+#4973 = DEFINITIONAL_REPRESENTATION('',(#4974),#4978);+#4974 = LINE('',#4975,#4976);+#4975 = CARTESIAN_POINT('',(8.217107131147E-02,9.314404469578E-02));+#4976 = VECTOR('',#4977,1.);+#4977 = DIRECTION('',(0.,-1.));+#4978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4979 = ORIENTED_EDGE('',*,*,#4980,.T.);+#4980 = EDGE_CURVE('',#4958,#4981,#4983,.T.);+#4981 = VERTEX_POINT('',#4982);+#4982 = CARTESIAN_POINT('',(0.,1.395983918052,9.314404469578E-02));+#4983 = SURFACE_CURVE('',#4984,(#4988,#4995),.PCURVE_S1.);+#4984 = LINE('',#4985,#4986);+#4985 = CARTESIAN_POINT('',(0.,1.345441613228,9.314404469578E-02));+#4986 = VECTOR('',#4987,1.);+#4987 = DIRECTION('',(0.,1.,0.));+#4988 = PCURVE('',#140,#4989);+#4989 = DEFINITIONAL_REPRESENTATION('',(#4990),#4994);+#4990 = LINE('',#4991,#4992);+#4991 = CARTESIAN_POINT('',(3.154558386772,9.314404469578E-02));+#4992 = VECTOR('',#4993,1.);+#4993 = DIRECTION('',(-1.,0.));+#4994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4995 = PCURVE('',#4229,#4996);+#4996 = DEFINITIONAL_REPRESENTATION('',(#4997),#5001);+#4997 = LINE('',#4998,#4999);+#4998 = CARTESIAN_POINT('',(-0.594729450677,0.11898514424));+#4999 = VECTOR('',#5000,1.);+#5000 = DIRECTION('',(0.,1.));+#5001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5002 = ORIENTED_EDGE('',*,*,#5003,.F.);+#5003 = EDGE_CURVE('',#5004,#4981,#5006,.T.);+#5004 = VERTEX_POINT('',#5005);+#5005 = CARTESIAN_POINT('',(0.,1.395983918052,0.193144044696));+#5006 = SURFACE_CURVE('',#5007,(#5011,#5018),.PCURVE_S1.);+#5007 = LINE('',#5008,#5009);+#5008 = CARTESIAN_POINT('',(0.,1.395983918052,0.193144044696));+#5009 = VECTOR('',#5010,1.);+#5010 = DIRECTION('',(0.,0.,-1.));+#5011 = PCURVE('',#140,#5012);+#5012 = DEFINITIONAL_REPRESENTATION('',(#5013),#5017);+#5013 = LINE('',#5014,#5015);+#5014 = CARTESIAN_POINT('',(3.104016081948,0.193144044696));+#5015 = VECTOR('',#5016,1.);+#5016 = DIRECTION('',(0.,-1.));+#5017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5018 = PCURVE('',#5019,#5024);+#5019 = PLANE('',#5020);+#5020 = AXIS2_PLACEMENT_3D('',#5021,#5022,#5023);+#5021 = CARTESIAN_POINT('',(-7.574131513371E-02,1.395983918052,+    0.193144044696));+#5022 = DIRECTION('',(0.,1.,0.));+#5023 = DIRECTION('',(1.,0.,0.));+#5024 = DEFINITIONAL_REPRESENTATION('',(#5025),#5029);+#5025 = LINE('',#5026,#5027);+#5026 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#5027 = VECTOR('',#5028,1.);+#5028 = DIRECTION('',(0.,1.));+#5029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5030 = ORIENTED_EDGE('',*,*,#5031,.T.);+#5031 = EDGE_CURVE('',#5004,#5032,#5034,.T.);+#5032 = VERTEX_POINT('',#5033);+#5033 = CARTESIAN_POINT('',(0.,1.47598391805,0.193144044696));+#5034 = SURFACE_CURVE('',#5035,(#5039,#5046),.PCURVE_S1.);+#5035 = LINE('',#5036,#5037);+#5036 = CARTESIAN_POINT('',(0.,1.395983918052,0.193144044696));+#5037 = VECTOR('',#5038,1.);+#5038 = DIRECTION('',(0.,1.,0.));+#5039 = PCURVE('',#140,#5040);+#5040 = DEFINITIONAL_REPRESENTATION('',(#5041),#5045);+#5041 = LINE('',#5042,#5043);+#5042 = CARTESIAN_POINT('',(3.104016081948,0.193144044696));+#5043 = VECTOR('',#5044,1.);+#5044 = DIRECTION('',(-1.,0.));+#5045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5046 = PCURVE('',#5047,#5052);+#5047 = PLANE('',#5048);+#5048 = AXIS2_PLACEMENT_3D('',#5049,#5050,#5051);+#5049 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+    ));+#5050 = DIRECTION('',(0.,0.,1.));+#5051 = DIRECTION('',(1.,0.,-0.));+#5052 = DEFINITIONAL_REPRESENTATION('',(#5053),#5057);+#5053 = LINE('',#5054,#5055);+#5054 = CARTESIAN_POINT('',(-0.687763226012,0.14470739725));+#5055 = VECTOR('',#5056,1.);+#5056 = DIRECTION('',(0.,1.));+#5057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5058 = ORIENTED_EDGE('',*,*,#5059,.T.);+#5059 = EDGE_CURVE('',#5032,#5060,#5062,.T.);+#5060 = VERTEX_POINT('',#5061);+#5061 = CARTESIAN_POINT('',(0.,1.47598391805,9.314404469578E-02));+#5062 = SURFACE_CURVE('',#5063,(#5067,#5074),.PCURVE_S1.);+#5063 = LINE('',#5064,#5065);+#5064 = CARTESIAN_POINT('',(0.,1.47598391805,0.193144044696));+#5065 = VECTOR('',#5066,1.);+#5066 = DIRECTION('',(0.,0.,-1.));+#5067 = PCURVE('',#140,#5068);+#5068 = DEFINITIONAL_REPRESENTATION('',(#5069),#5073);+#5069 = LINE('',#5070,#5071);+#5070 = CARTESIAN_POINT('',(3.02401608195,0.193144044696));+#5071 = VECTOR('',#5072,1.);+#5072 = DIRECTION('',(0.,-1.));+#5073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5074 = PCURVE('',#5075,#5080);+#5075 = PLANE('',#5076);+#5076 = AXIS2_PLACEMENT_3D('',#5077,#5078,#5079);+#5077 = CARTESIAN_POINT('',(5.92586848756E-02,1.47598391805,+    0.193144044696));+#5078 = DIRECTION('',(0.,-1.,0.));+#5079 = DIRECTION('',(-1.,0.,0.));+#5080 = DEFINITIONAL_REPRESENTATION('',(#5081),#5085);+#5081 = LINE('',#5082,#5083);+#5082 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#5083 = VECTOR('',#5084,1.);+#5084 = DIRECTION('',(0.,1.));+#5085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5086 = ORIENTED_EDGE('',*,*,#5087,.T.);+#5087 = EDGE_CURVE('',#5060,#5088,#5090,.T.);+#5088 = VERTEX_POINT('',#5089);+#5089 = CARTESIAN_POINT('',(0.,1.525943709769,9.314404469578E-02));+#5090 = SURFACE_CURVE('',#5091,(#5095,#5102),.PCURVE_S1.);+#5091 = LINE('',#5092,#5093);+#5092 = CARTESIAN_POINT('',(0.,1.47598391805,9.314404469578E-02));+#5093 = VECTOR('',#5094,1.);+#5094 = DIRECTION('',(0.,1.,0.));+#5095 = PCURVE('',#140,#5096);+#5096 = DEFINITIONAL_REPRESENTATION('',(#5097),#5101);+#5097 = LINE('',#5098,#5099);+#5098 = CARTESIAN_POINT('',(3.02401608195,9.314404469578E-02));+#5099 = VECTOR('',#5100,1.);+#5100 = DIRECTION('',(-1.,0.));+#5101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5102 = PCURVE('',#4229,#5103);+#5103 = DEFINITIONAL_REPRESENTATION('',(#5104),#5108);+#5104 = LINE('',#5105,#5106);+#5105 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#5106 = VECTOR('',#5107,1.);+#5107 = DIRECTION('',(0.,1.));+#5108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5109 = ORIENTED_EDGE('',*,*,#5110,.F.);+#5110 = EDGE_CURVE('',#549,#5088,#5111,.T.);+#5111 = SURFACE_CURVE('',#5112,(#5116,#5123),.PCURVE_S1.);+#5112 = LINE('',#5113,#5114);+#5113 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#5114 = VECTOR('',#5115,1.);+#5115 = DIRECTION('',(0.,0.,1.));+#5116 = PCURVE('',#140,#5117);+#5117 = DEFINITIONAL_REPRESENTATION('',(#5118),#5122);+#5118 = LINE('',#5119,#5120);+#5119 = CARTESIAN_POINT('',(2.974056290231,0.));+#5120 = VECTOR('',#5121,1.);+#5121 = DIRECTION('',(0.,1.));+#5122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5123 = PCURVE('',#587,#5124);+#5124 = DEFINITIONAL_REPRESENTATION('',(#5125),#5129);+#5125 = LINE('',#5126,#5127);+#5126 = CARTESIAN_POINT('',(5.936554716993E-04,9.314404469578E-02));+#5127 = VECTOR('',#5128,1.);+#5128 = DIRECTION('',(0.,-1.));+#5129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5130 = ORIENTED_EDGE('',*,*,#548,.T.);+#5131 = ORIENTED_EDGE('',*,*,#4168,.T.);+#5132 = ORIENTED_EDGE('',*,*,#5133,.T.);+#5133 = EDGE_CURVE('',#4169,#5134,#5136,.T.);+#5134 = VERTEX_POINT('',#5135);+#5135 = CARTESIAN_POINT('',(0.,1.895983918053,9.314404469578E-02));+#5136 = SURFACE_CURVE('',#5137,(#5141,#5148),.PCURVE_S1.);+#5137 = LINE('',#5138,#5139);+#5138 = CARTESIAN_POINT('',(0.,1.845441613228,9.314404469578E-02));+#5139 = VECTOR('',#5140,1.);+#5140 = DIRECTION('',(0.,1.,0.));+#5141 = PCURVE('',#140,#5142);+#5142 = DEFINITIONAL_REPRESENTATION('',(#5143),#5147);+#5143 = LINE('',#5144,#5145);+#5144 = CARTESIAN_POINT('',(2.654558386772,9.314404469578E-02));+#5145 = VECTOR('',#5146,1.);+#5146 = DIRECTION('',(-1.,0.));+#5147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5148 = PCURVE('',#4229,#5149);+#5149 = DEFINITIONAL_REPRESENTATION('',(#5150),#5154);+#5150 = LINE('',#5151,#5152);+#5151 = CARTESIAN_POINT('',(-0.594729450677,0.61898514424));+#5152 = VECTOR('',#5153,1.);+#5153 = DIRECTION('',(0.,1.));+#5154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5155 = ORIENTED_EDGE('',*,*,#5156,.F.);+#5156 = EDGE_CURVE('',#5157,#5134,#5159,.T.);+#5157 = VERTEX_POINT('',#5158);+#5158 = CARTESIAN_POINT('',(0.,1.895983918053,0.193144044696));+#5159 = SURFACE_CURVE('',#5160,(#5164,#5171),.PCURVE_S1.);+#5160 = LINE('',#5161,#5162);+#5161 = CARTESIAN_POINT('',(0.,1.895983918053,0.193144044696));+#5162 = VECTOR('',#5163,1.);+#5163 = DIRECTION('',(0.,0.,-1.));+#5164 = PCURVE('',#140,#5165);+#5165 = DEFINITIONAL_REPRESENTATION('',(#5166),#5170);+#5166 = LINE('',#5167,#5168);+#5167 = CARTESIAN_POINT('',(2.604016081947,0.193144044696));+#5168 = VECTOR('',#5169,1.);+#5169 = DIRECTION('',(0.,-1.));+#5170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5171 = PCURVE('',#5172,#5177);+#5172 = PLANE('',#5173);+#5173 = AXIS2_PLACEMENT_3D('',#5174,#5175,#5176);+#5174 = CARTESIAN_POINT('',(-7.574131513371E-02,1.895983918053,+    0.193144044696));+#5175 = DIRECTION('',(0.,1.,0.));+#5176 = DIRECTION('',(1.,0.,0.));+#5177 = DEFINITIONAL_REPRESENTATION('',(#5178),#5182);+#5178 = LINE('',#5179,#5180);+#5179 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#5180 = VECTOR('',#5181,1.);+#5181 = DIRECTION('',(0.,1.));+#5182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5183 = ORIENTED_EDGE('',*,*,#5184,.T.);+#5184 = EDGE_CURVE('',#5157,#5185,#5187,.T.);+#5185 = VERTEX_POINT('',#5186);+#5186 = CARTESIAN_POINT('',(0.,1.975983918052,0.193144044696));+#5187 = SURFACE_CURVE('',#5188,(#5192,#5199),.PCURVE_S1.);+#5188 = LINE('',#5189,#5190);+#5189 = CARTESIAN_POINT('',(0.,1.895983918053,0.193144044696));+#5190 = VECTOR('',#5191,1.);+#5191 = DIRECTION('',(0.,1.,0.));+#5192 = PCURVE('',#140,#5193);+#5193 = DEFINITIONAL_REPRESENTATION('',(#5194),#5198);+#5194 = LINE('',#5195,#5196);+#5195 = CARTESIAN_POINT('',(2.604016081947,0.193144044696));+#5196 = VECTOR('',#5197,1.);+#5197 = DIRECTION('',(-1.,0.));+#5198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5199 = PCURVE('',#5200,#5205);+#5200 = PLANE('',#5201);+#5201 = AXIS2_PLACEMENT_3D('',#5202,#5203,#5204);+#5202 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+    ));+#5203 = DIRECTION('',(0.,0.,1.));+#5204 = DIRECTION('',(1.,0.,-0.));+#5205 = DEFINITIONAL_REPRESENTATION('',(#5206),#5210);+#5206 = LINE('',#5207,#5208);+#5207 = CARTESIAN_POINT('',(-0.687763226012,0.644707397251));+#5208 = VECTOR('',#5209,1.);+#5209 = DIRECTION('',(0.,1.));+#5210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5211 = ORIENTED_EDGE('',*,*,#5212,.T.);+#5212 = EDGE_CURVE('',#5185,#5213,#5215,.T.);+#5213 = VERTEX_POINT('',#5214);+#5214 = CARTESIAN_POINT('',(0.,1.975983918052,9.314404469578E-02));+#5215 = SURFACE_CURVE('',#5216,(#5220,#5227),.PCURVE_S1.);+#5216 = LINE('',#5217,#5218);+#5217 = CARTESIAN_POINT('',(0.,1.975983918052,0.193144044696));+#5218 = VECTOR('',#5219,1.);+#5219 = DIRECTION('',(0.,0.,-1.));+#5220 = PCURVE('',#140,#5221);+#5221 = DEFINITIONAL_REPRESENTATION('',(#5222),#5226);+#5222 = LINE('',#5223,#5224);+#5223 = CARTESIAN_POINT('',(2.524016081948,0.193144044696));+#5224 = VECTOR('',#5225,1.);+#5225 = DIRECTION('',(0.,-1.));+#5226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5227 = PCURVE('',#5228,#5233);+#5228 = PLANE('',#5229);+#5229 = AXIS2_PLACEMENT_3D('',#5230,#5231,#5232);+#5230 = CARTESIAN_POINT('',(5.92586848756E-02,1.975983918052,+    0.193144044696));+#5231 = DIRECTION('',(0.,-1.,0.));+#5232 = DIRECTION('',(-1.,0.,0.));+#5233 = DEFINITIONAL_REPRESENTATION('',(#5234),#5238);+#5234 = LINE('',#5235,#5236);+#5235 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#5236 = VECTOR('',#5237,1.);+#5237 = DIRECTION('',(0.,1.));+#5238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5239 = ORIENTED_EDGE('',*,*,#5240,.T.);+#5240 = EDGE_CURVE('',#5213,#5241,#5243,.T.);+#5241 = VERTEX_POINT('',#5242);+#5242 = CARTESIAN_POINT('',(0.,2.025943709769,9.314404469578E-02));+#5243 = SURFACE_CURVE('',#5244,(#5248,#5255),.PCURVE_S1.);+#5244 = LINE('',#5245,#5246);+#5245 = CARTESIAN_POINT('',(0.,1.975983918052,9.314404469578E-02));+#5246 = VECTOR('',#5247,1.);+#5247 = DIRECTION('',(0.,1.,0.));+#5248 = PCURVE('',#140,#5249);+#5249 = DEFINITIONAL_REPRESENTATION('',(#5250),#5254);+#5250 = LINE('',#5251,#5252);+#5251 = CARTESIAN_POINT('',(2.524016081948,9.314404469578E-02));+#5252 = VECTOR('',#5253,1.);+#5253 = DIRECTION('',(-1.,0.));+#5254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5255 = PCURVE('',#4229,#5256);+#5256 = DEFINITIONAL_REPRESENTATION('',(#5257),#5261);+#5257 = LINE('',#5258,#5259);+#5258 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#5259 = VECTOR('',#5260,1.);+#5260 = DIRECTION('',(0.,1.));+#5261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5262 = ORIENTED_EDGE('',*,*,#5263,.F.);+#5263 = EDGE_CURVE('',#2872,#5241,#5264,.T.);+#5264 = SURFACE_CURVE('',#5265,(#5269,#5276),.PCURVE_S1.);+#5265 = LINE('',#5266,#5267);+#5266 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#5267 = VECTOR('',#5268,1.);+#5268 = DIRECTION('',(0.,0.,1.));+#5269 = PCURVE('',#140,#5270);+#5270 = DEFINITIONAL_REPRESENTATION('',(#5271),#5275);+#5271 = LINE('',#5272,#5273);+#5272 = CARTESIAN_POINT('',(2.474056290231,0.));+#5273 = VECTOR('',#5274,1.);+#5274 = DIRECTION('',(0.,1.));+#5275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5276 = PCURVE('',#2910,#5277);+#5277 = DEFINITIONAL_REPRESENTATION('',(#5278),#5282);+#5278 = LINE('',#5279,#5280);+#5279 = CARTESIAN_POINT('',(5.936554716987E-04,9.314404469578E-02));+#5280 = VECTOR('',#5281,1.);+#5281 = DIRECTION('',(0.,-1.));+#5282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5283 = ORIENTED_EDGE('',*,*,#2871,.T.);+#5284 = ORIENTED_EDGE('',*,*,#5285,.T.);+#5285 = EDGE_CURVE('',#2844,#5286,#5288,.T.);+#5286 = VERTEX_POINT('',#5287);+#5287 = CARTESIAN_POINT('',(0.,2.795441613227,9.314404469578E-02));+#5288 = SURFACE_CURVE('',#5289,(#5293,#5300),.PCURVE_S1.);+#5289 = LINE('',#5290,#5291);+#5290 = CARTESIAN_POINT('',(0.,2.795441613227,0.));+#5291 = VECTOR('',#5292,1.);+#5292 = DIRECTION('',(0.,0.,1.));+#5293 = PCURVE('',#140,#5294);+#5294 = DEFINITIONAL_REPRESENTATION('',(#5295),#5299);+#5295 = LINE('',#5296,#5297);+#5296 = CARTESIAN_POINT('',(1.704558386773,0.));+#5297 = VECTOR('',#5298,1.);+#5298 = DIRECTION('',(0.,1.));+#5299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5300 = PCURVE('',#2859,#5301);+#5301 = DEFINITIONAL_REPRESENTATION('',(#5302),#5306);+#5302 = LINE('',#5303,#5304);+#5303 = CARTESIAN_POINT('',(5.936554716977E-04,-9.314404469578E-02));+#5304 = VECTOR('',#5305,1.);+#5305 = DIRECTION('',(0.,1.));+#5306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5307 = ORIENTED_EDGE('',*,*,#5308,.T.);+#5308 = EDGE_CURVE('',#5286,#5309,#5311,.T.);+#5309 = VERTEX_POINT('',#5310);+#5310 = CARTESIAN_POINT('',(0.,2.845983916501,9.314404469578E-02));+#5311 = SURFACE_CURVE('',#5312,(#5316,#5323),.PCURVE_S1.);+#5312 = LINE('',#5313,#5314);+#5313 = CARTESIAN_POINT('',(0.,2.795441613227,9.314404469578E-02));+#5314 = VECTOR('',#5315,1.);+#5315 = DIRECTION('',(0.,1.,0.));+#5316 = PCURVE('',#140,#5317);+#5317 = DEFINITIONAL_REPRESENTATION('',(#5318),#5322);+#5318 = LINE('',#5319,#5320);+#5319 = CARTESIAN_POINT('',(1.704558386773,9.314404469578E-02));+#5320 = VECTOR('',#5321,1.);+#5321 = DIRECTION('',(-1.,0.));+#5322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5323 = PCURVE('',#5324,#5329);+#5324 = PLANE('',#5325);+#5325 = AXIS2_PLACEMENT_3D('',#5326,#5327,#5328);+#5326 = CARTESIAN_POINT('',(0.417539932793,2.885692661811,+    9.314404469578E-02));+#5327 = DIRECTION('',(0.,0.,1.));+#5328 = DIRECTION('',(1.,0.,-0.));+#5329 = DEFINITIONAL_REPRESENTATION('',(#5330),#5334);+#5330 = LINE('',#5331,#5332);+#5331 = CARTESIAN_POINT('',(-0.417539932793,-9.0251048584E-02));+#5332 = VECTOR('',#5333,1.);+#5333 = DIRECTION('',(0.,1.));+#5334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5335 = ORIENTED_EDGE('',*,*,#5336,.F.);+#5336 = EDGE_CURVE('',#5337,#5309,#5339,.T.);+#5337 = VERTEX_POINT('',#5338);+#5338 = CARTESIAN_POINT('',(0.,2.845983916501,0.193144044696));+#5339 = SURFACE_CURVE('',#5340,(#5344,#5351),.PCURVE_S1.);+#5340 = LINE('',#5341,#5342);+#5341 = CARTESIAN_POINT('',(0.,2.845983916501,0.193144044696));+#5342 = VECTOR('',#5343,1.);+#5343 = DIRECTION('',(0.,0.,-1.));+#5344 = PCURVE('',#140,#5345);+#5345 = DEFINITIONAL_REPRESENTATION('',(#5346),#5350);+#5346 = LINE('',#5347,#5348);+#5347 = CARTESIAN_POINT('',(1.654016083499,0.193144044696));+#5348 = VECTOR('',#5349,1.);+#5349 = DIRECTION('',(0.,-1.));+#5350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5351 = PCURVE('',#5352,#5357);+#5352 = PLANE('',#5353);+#5353 = AXIS2_PLACEMENT_3D('',#5354,#5355,#5356);+#5354 = CARTESIAN_POINT('',(-7.574131842608E-02,2.845983916501,+    0.193144044696));+#5355 = DIRECTION('',(0.,1.,0.));+#5356 = DIRECTION('',(1.,0.,0.));+#5357 = DEFINITIONAL_REPRESENTATION('',(#5358),#5362);+#5358 = LINE('',#5359,#5360);+#5359 = CARTESIAN_POINT('',(7.574131842608E-02,0.));+#5360 = VECTOR('',#5361,1.);+#5361 = DIRECTION('',(0.,1.));+#5362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5363 = ORIENTED_EDGE('',*,*,#5364,.T.);+#5364 = EDGE_CURVE('',#5337,#5365,#5367,.T.);+#5365 = VERTEX_POINT('',#5366);+#5366 = CARTESIAN_POINT('',(0.,2.925983916503,0.193144044696));+#5367 = SURFACE_CURVE('',#5368,(#5372,#5379),.PCURVE_S1.);+#5368 = LINE('',#5369,#5370);+#5369 = CARTESIAN_POINT('',(0.,2.845983916501,0.193144044696));+#5370 = VECTOR('',#5371,1.);+#5371 = DIRECTION('',(0.,1.,0.));+#5372 = PCURVE('',#140,#5373);+#5373 = DEFINITIONAL_REPRESENTATION('',(#5374),#5378);+#5374 = LINE('',#5375,#5376);+#5375 = CARTESIAN_POINT('',(1.654016083499,0.193144044696));+#5376 = VECTOR('',#5377,1.);+#5377 = DIRECTION('',(-1.,0.));+#5378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5379 = PCURVE('',#5380,#5385);+#5380 = PLANE('',#5381);+#5381 = AXIS2_PLACEMENT_3D('',#5382,#5383,#5384);+#5382 = CARTESIAN_POINT('',(0.820529093186,2.871666071784,0.193144044696+    ));+#5383 = DIRECTION('',(0.,0.,1.));+#5384 = DIRECTION('',(1.,0.,-0.));+#5385 = DEFINITIONAL_REPRESENTATION('',(#5386),#5390);+#5386 = LINE('',#5387,#5388);+#5387 = CARTESIAN_POINT('',(-0.820529093186,-2.5682155283E-02));+#5388 = VECTOR('',#5389,1.);+#5389 = DIRECTION('',(0.,1.));+#5390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5391 = ORIENTED_EDGE('',*,*,#5392,.T.);+#5392 = EDGE_CURVE('',#5365,#5393,#5395,.T.);+#5393 = VERTEX_POINT('',#5394);+#5394 = CARTESIAN_POINT('',(0.,2.925983916503,9.314404469578E-02));+#5395 = SURFACE_CURVE('',#5396,(#5400,#5407),.PCURVE_S1.);+#5396 = LINE('',#5397,#5398);+#5397 = CARTESIAN_POINT('',(0.,2.925983916503,0.193144044696));+#5398 = VECTOR('',#5399,1.);+#5399 = DIRECTION('',(0.,0.,-1.));+#5400 = PCURVE('',#140,#5401);+#5401 = DEFINITIONAL_REPRESENTATION('',(#5402),#5406);+#5402 = LINE('',#5403,#5404);+#5403 = CARTESIAN_POINT('',(1.574016083497,0.193144044696));+#5404 = VECTOR('',#5405,1.);+#5405 = DIRECTION('',(0.,-1.));+#5406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5407 = PCURVE('',#5408,#5413);+#5408 = PLANE('',#5409);+#5409 = AXIS2_PLACEMENT_3D('',#5410,#5411,#5412);+#5410 = CARTESIAN_POINT('',(5.925868158323E-02,2.925983916503,+    0.193144044696));+#5411 = DIRECTION('',(0.,-1.,0.));+#5412 = DIRECTION('',(-1.,0.,0.));+#5413 = DEFINITIONAL_REPRESENTATION('',(#5414),#5418);+#5414 = LINE('',#5415,#5416);+#5415 = CARTESIAN_POINT('',(5.925868158323E-02,0.));+#5416 = VECTOR('',#5417,1.);+#5417 = DIRECTION('',(0.,1.));+#5418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5419 = ORIENTED_EDGE('',*,*,#5420,.T.);+#5420 = EDGE_CURVE('',#5393,#5421,#5423,.T.);+#5421 = VERTEX_POINT('',#5422);+#5422 = CARTESIAN_POINT('',(0.,2.975943712833,9.314404469578E-02));+#5423 = SURFACE_CURVE('',#5424,(#5428,#5435),.PCURVE_S1.);+#5424 = LINE('',#5425,#5426);+#5425 = CARTESIAN_POINT('',(0.,2.925983916503,9.314404469578E-02));+#5426 = VECTOR('',#5427,1.);+#5427 = DIRECTION('',(0.,1.,0.));+#5428 = PCURVE('',#140,#5429);+#5429 = DEFINITIONAL_REPRESENTATION('',(#5430),#5434);+#5430 = LINE('',#5431,#5432);+#5431 = CARTESIAN_POINT('',(1.574016083497,9.314404469578E-02));+#5432 = VECTOR('',#5433,1.);+#5433 = DIRECTION('',(-1.,0.));+#5434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5435 = PCURVE('',#5324,#5436);+#5436 = DEFINITIONAL_REPRESENTATION('',(#5437),#5441);+#5437 = LINE('',#5438,#5439);+#5438 = CARTESIAN_POINT('',(-0.417539932793,4.0291254692E-02));+#5439 = VECTOR('',#5440,1.);+#5440 = DIRECTION('',(0.,1.));+#5441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5442 = ORIENTED_EDGE('',*,*,#5443,.F.);+#5443 = EDGE_CURVE('',#2704,#5421,#5444,.T.);+#5444 = SURFACE_CURVE('',#5445,(#5449,#5456),.PCURVE_S1.);+#5445 = LINE('',#5446,#5447);+#5446 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#5447 = VECTOR('',#5448,1.);+#5448 = DIRECTION('',(0.,0.,1.));+#5449 = PCURVE('',#140,#5450);+#5450 = DEFINITIONAL_REPRESENTATION('',(#5451),#5455);+#5451 = LINE('',#5452,#5453);+#5452 = CARTESIAN_POINT('',(1.524056287167,0.));+#5453 = VECTOR('',#5454,1.);+#5454 = DIRECTION('',(0.,1.));+#5455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5456 = PCURVE('',#2742,#5457);+#5457 = DEFINITIONAL_REPRESENTATION('',(#5458),#5462);+#5458 = LINE('',#5459,#5460);+#5459 = CARTESIAN_POINT('',(5.936627694821E-04,9.314404469578E-02));+#5460 = VECTOR('',#5461,1.);+#5461 = DIRECTION('',(0.,-1.));+#5462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5463 = ORIENTED_EDGE('',*,*,#2703,.T.);+#5464 = ORIENTED_EDGE('',*,*,#5465,.T.);+#5465 = EDGE_CURVE('',#2676,#4245,#5466,.T.);+#5466 = SURFACE_CURVE('',#5467,(#5471,#5478),.PCURVE_S1.);+#5467 = LINE('',#5468,#5469);+#5468 = CARTESIAN_POINT('',(0.,3.295441613229,0.));+#5469 = VECTOR('',#5470,1.);+#5470 = DIRECTION('',(0.,0.,1.));+#5471 = PCURVE('',#140,#5472);+#5472 = DEFINITIONAL_REPRESENTATION('',(#5473),#5477);+#5473 = LINE('',#5474,#5475);+#5474 = CARTESIAN_POINT('',(1.204558386771,0.));+#5475 = VECTOR('',#5476,1.);+#5476 = DIRECTION('',(0.,1.));+#5477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5478 = PCURVE('',#2691,#5479);+#5479 = DEFINITIONAL_REPRESENTATION('',(#5480),#5484);+#5480 = LINE('',#5481,#5482);+#5481 = CARTESIAN_POINT('',(5.936554716971E-04,-9.314404469578E-02));+#5482 = VECTOR('',#5483,1.);+#5483 = DIRECTION('',(0.,1.));+#5484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5485 = ADVANCED_FACE('',(#5486),#4262,.F.);+#5486 = FACE_BOUND('',#5487,.F.);+#5487 = EDGE_LOOP('',(#5488,#5489,#5512,#5535,#5563,#5586,#5607,#5608,+    #5631,#5659));+#5488 = ORIENTED_EDGE('',*,*,#4244,.F.);+#5489 = ORIENTED_EDGE('',*,*,#5490,.F.);+#5490 = EDGE_CURVE('',#5491,#4245,#5493,.T.);+#5491 = VERTEX_POINT('',#5492);+#5492 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+    9.314404469578E-02));+#5493 = SURFACE_CURVE('',#5494,(#5498,#5505),.PCURVE_S1.);+#5494 = LINE('',#5495,#5496);+#5495 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+    9.314404469578E-02));+#5496 = VECTOR('',#5497,1.);+#5497 = DIRECTION('',(-0.906183139956,0.422885465415,0.));+#5498 = PCURVE('',#4262,#5499);+#5499 = DEFINITIONAL_REPRESENTATION('',(#5500),#5504);+#5500 = LINE('',#5501,#5502);+#5501 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000319));+#5502 = VECTOR('',#5503,1.);+#5503 = DIRECTION('',(-0.906183139956,0.422885465415));+#5504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5505 = PCURVE('',#2691,#5506);+#5506 = DEFINITIONAL_REPRESENTATION('',(#5507),#5511);+#5507 = LINE('',#5508,#5509);+#5508 = CARTESIAN_POINT('',(8.276472678656E-02,0.));+#5509 = VECTOR('',#5510,1.);+#5510 = DIRECTION('',(-1.,0.));+#5511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5512 = ORIENTED_EDGE('',*,*,#5513,.T.);+#5513 = EDGE_CURVE('',#5491,#5514,#5516,.T.);+#5514 = VERTEX_POINT('',#5515);+#5515 = CARTESIAN_POINT('',(0.774462032802,3.260692661495,+    9.314404469578E-02));+#5516 = SURFACE_CURVE('',#5517,(#5521,#5528),.PCURVE_S1.);+#5517 = LINE('',#5518,#5519);+#5518 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+    9.314404469578E-02));+#5519 = VECTOR('',#5520,1.);+#5520 = DIRECTION('',(1.,1.298009331309E-12,0.));+#5521 = PCURVE('',#4262,#5522);+#5522 = DEFINITIONAL_REPRESENTATION('',(#5523),#5527);+#5523 = LINE('',#5524,#5525);+#5524 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000319));+#5525 = VECTOR('',#5526,1.);+#5526 = DIRECTION('',(1.,1.298009331309E-12));+#5527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5528 = PCURVE('',#2663,#5529);+#5529 = DEFINITIONAL_REPRESENTATION('',(#5530),#5534);+#5530 = LINE('',#5531,#5532);+#5531 = CARTESIAN_POINT('',(0.,0.));+#5532 = VECTOR('',#5533,1.);+#5533 = DIRECTION('',(1.,0.));+#5534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5535 = ORIENTED_EDGE('',*,*,#5536,.F.);+#5536 = EDGE_CURVE('',#5537,#5514,#5539,.T.);+#5537 = VERTEX_POINT('',#5538);+#5538 = CARTESIAN_POINT('',(0.774462032802,3.510692661495,+    9.314404469578E-02));+#5539 = SURFACE_CURVE('',#5540,(#5545,#5556),.PCURVE_S1.);+#5540 = CIRCLE('',#5541,0.125);+#5541 = AXIS2_PLACEMENT_3D('',#5542,#5543,#5544);+#5542 = CARTESIAN_POINT('',(0.77446203283,3.385692661495,+    9.314404469578E-02));+#5543 = DIRECTION('',(0.,0.,-1.));+#5544 = DIRECTION('',(-2.217284134076E-10,1.,0.));+#5545 = PCURVE('',#4262,#5546);+#5546 = DEFINITIONAL_REPRESENTATION('',(#5547),#5555);+#5547 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5548,#5549,#5550,#5551,+#5552,#5553,#5554),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5548 = CARTESIAN_POINT('',(0.356922100009,0.124999999684));+#5549 = CARTESIAN_POINT('',(0.573428450955,0.124999999732));+#5550 = CARTESIAN_POINT('',(0.465175275524,-6.2500000292E-02));+#5551 = CARTESIAN_POINT('',(0.356922100092,-0.250000000316));+#5552 = CARTESIAN_POINT('',(0.248668924578,-6.250000034E-02));+#5553 = CARTESIAN_POINT('',(0.140415749063,0.124999999636));+#5554 = CARTESIAN_POINT('',(0.356922100009,0.124999999684));+#5555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5556 = PCURVE('',#2635,#5557);+#5557 = DEFINITIONAL_REPRESENTATION('',(#5558),#5562);+#5558 = LINE('',#5559,#5560);+#5559 = CARTESIAN_POINT('',(0.,0.));+#5560 = VECTOR('',#5561,1.);+#5561 = DIRECTION('',(1.,0.));+#5562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5563 = ORIENTED_EDGE('',*,*,#5564,.T.);+#5564 = EDGE_CURVE('',#5537,#5565,#5567,.T.);+#5565 = VERTEX_POINT('',#5566);+#5566 = CARTESIAN_POINT('',(7.446203942479E-02,3.510692661498,+    9.314404469578E-02));+#5567 = SURFACE_CURVE('',#5568,(#5572,#5579),.PCURVE_S1.);+#5568 = LINE('',#5569,#5570);+#5569 = CARTESIAN_POINT('',(0.774462032821,3.510692661497,+    9.314404469578E-02));+#5570 = VECTOR('',#5571,1.);+#5571 = DIRECTION('',(-1.,1.300546983974E-12,0.));+#5572 = PCURVE('',#4262,#5573);+#5573 = DEFINITIONAL_REPRESENTATION('',(#5574),#5578);+#5574 = LINE('',#5575,#5576);+#5575 = CARTESIAN_POINT('',(0.356922100028,0.124999999686));+#5576 = VECTOR('',#5577,1.);+#5577 = DIRECTION('',(-1.,1.300546983974E-12));+#5578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5579 = PCURVE('',#2602,#5580);+#5580 = DEFINITIONAL_REPRESENTATION('',(#5581),#5585);+#5581 = LINE('',#5582,#5583);+#5582 = CARTESIAN_POINT('',(-0.624999993425,0.));+#5583 = VECTOR('',#5584,1.);+#5584 = DIRECTION('',(1.,0.));+#5585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5586 = ORIENTED_EDGE('',*,*,#5587,.F.);+#5587 = EDGE_CURVE('',#4359,#5565,#5588,.T.);+#5588 = SURFACE_CURVE('',#5589,(#5593,#5600),.PCURVE_S1.);+#5589 = LINE('',#5590,#5591);+#5590 = CARTESIAN_POINT('',(0.,3.475943712833,9.314404469578E-02));+#5591 = VECTOR('',#5592,1.);+#5592 = DIRECTION('',(0.906183154297,0.422885434685,0.));+#5593 = PCURVE('',#4262,#5594);+#5594 = DEFINITIONAL_REPRESENTATION('',(#5595),#5599);+#5595 = LINE('',#5596,#5597);+#5596 = CARTESIAN_POINT('',(-0.417539932793,9.0251051022E-02));+#5597 = VECTOR('',#5598,1.);+#5598 = DIRECTION('',(0.906183154297,0.422885434685));+#5599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5600 = PCURVE('',#2574,#5601);+#5601 = DEFINITIONAL_REPRESENTATION('',(#5602),#5606);+#5602 = LINE('',#5603,#5604);+#5603 = CARTESIAN_POINT('',(5.936627694815E-04,0.));+#5604 = VECTOR('',#5605,1.);+#5605 = DIRECTION('',(1.,0.));+#5606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5607 = ORIENTED_EDGE('',*,*,#4358,.F.);+#5608 = ORIENTED_EDGE('',*,*,#5609,.T.);+#5609 = EDGE_CURVE('',#4331,#5610,#5612,.T.);+#5610 = VERTEX_POINT('',#5611);+#5611 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+    9.314404469578E-02));+#5612 = SURFACE_CURVE('',#5613,(#5617,#5624),.PCURVE_S1.);+#5613 = LINE('',#5614,#5615);+#5614 = CARTESIAN_POINT('',(0.,3.425983916501,9.314404469578E-02));+#5615 = VECTOR('',#5616,1.);+#5616 = DIRECTION('',(1.,0.,0.));+#5617 = PCURVE('',#4262,#5618);+#5618 = DEFINITIONAL_REPRESENTATION('',(#5619),#5623);+#5619 = LINE('',#5620,#5621);+#5620 = CARTESIAN_POINT('',(-0.417539932793,4.029125469E-02));+#5621 = VECTOR('',#5622,1.);+#5622 = DIRECTION('',(1.,0.));+#5623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5624 = PCURVE('',#4346,#5625);+#5625 = DEFINITIONAL_REPRESENTATION('',(#5626),#5630);+#5626 = LINE('',#5627,#5628);+#5627 = CARTESIAN_POINT('',(5.925868158323E-02,0.1));+#5628 = VECTOR('',#5629,1.);+#5629 = DIRECTION('',(-1.,-0.));+#5630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5631 = ORIENTED_EDGE('',*,*,#5632,.T.);+#5632 = EDGE_CURVE('',#5610,#5633,#5635,.T.);+#5633 = VERTEX_POINT('',#5634);+#5634 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+    9.314404469578E-02));+#5635 = SURFACE_CURVE('',#5636,(#5640,#5647),.PCURVE_S1.);+#5636 = LINE('',#5637,#5638);+#5637 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+    9.314404469578E-02));+#5638 = VECTOR('',#5639,1.);+#5639 = DIRECTION('',(0.,-1.,0.));+#5640 = PCURVE('',#4262,#5641);+#5641 = DEFINITIONAL_REPRESENTATION('',(#5642),#5646);+#5642 = LINE('',#5643,#5644);+#5643 = CARTESIAN_POINT('',(-0.375396759096,4.029125469E-02));+#5644 = VECTOR('',#5645,1.);+#5645 = DIRECTION('',(0.,-1.));+#5646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5647 = PCURVE('',#5648,#5653);+#5648 = PLANE('',#5649);+#5649 = AXIS2_PLACEMENT_3D('',#5650,#5651,#5652);+#5650 = CARTESIAN_POINT('',(4.214317369718E-02,3.597892775472,+    0.193144044696));+#5651 = DIRECTION('',(-1.,0.,0.));+#5652 = DIRECTION('',(0.,-1.,0.));+#5653 = DEFINITIONAL_REPRESENTATION('',(#5654),#5658);+#5654 = LINE('',#5655,#5656);+#5655 = CARTESIAN_POINT('',(0.171908858971,-0.1));+#5656 = VECTOR('',#5657,1.);+#5657 = DIRECTION('',(1.,0.));+#5658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5659 = ORIENTED_EDGE('',*,*,#5660,.T.);+#5660 = EDGE_CURVE('',#5633,#4247,#5661,.T.);+#5661 = SURFACE_CURVE('',#5662,(#5666,#5673),.PCURVE_S1.);+#5662 = LINE('',#5663,#5664);+#5663 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+    9.314404469578E-02));+#5664 = VECTOR('',#5665,1.);+#5665 = DIRECTION('',(-1.,0.,0.));+#5666 = PCURVE('',#4262,#5667);+#5667 = DEFINITIONAL_REPRESENTATION('',(#5668),#5672);+#5668 = LINE('',#5669,#5670);+#5669 = CARTESIAN_POINT('',(-0.375396759096,-3.9708745308E-02));+#5670 = VECTOR('',#5671,1.);+#5671 = DIRECTION('',(-1.,0.));+#5672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5673 = PCURVE('',#4290,#5674);+#5674 = DEFINITIONAL_REPRESENTATION('',(#5675),#5679);+#5675 = LINE('',#5676,#5677);+#5676 = CARTESIAN_POINT('',(0.117884492123,0.1));+#5677 = VECTOR('',#5678,1.);+#5678 = DIRECTION('',(-1.,0.));+#5679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5680 = ADVANCED_FACE('',(#5681),#2691,.F.);+#5681 = FACE_BOUND('',#5682,.F.);+#5682 = EDGE_LOOP('',(#5683,#5684,#5685,#5706));+#5683 = ORIENTED_EDGE('',*,*,#5465,.F.);+#5684 = ORIENTED_EDGE('',*,*,#2675,.T.);+#5685 = ORIENTED_EDGE('',*,*,#5686,.F.);+#5686 = EDGE_CURVE('',#5491,#2648,#5687,.T.);+#5687 = SURFACE_CURVE('',#5688,(#5692,#5699),.PCURVE_S1.);+#5688 = LINE('',#5689,#5690);+#5689 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+    9.314404469578E-02));+#5690 = VECTOR('',#5691,1.);+#5691 = DIRECTION('',(0.,0.,-1.));+#5692 = PCURVE('',#2691,#5693);+#5693 = DEFINITIONAL_REPRESENTATION('',(#5694),#5698);+#5694 = LINE('',#5695,#5696);+#5695 = CARTESIAN_POINT('',(8.276472678656E-02,0.));+#5696 = VECTOR('',#5697,1.);+#5697 = DIRECTION('',(0.,-1.));+#5698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5699 = PCURVE('',#2663,#5700);+#5700 = DEFINITIONAL_REPRESENTATION('',(#5701),#5705);+#5701 = LINE('',#5702,#5703);+#5702 = CARTESIAN_POINT('',(0.,0.));+#5703 = VECTOR('',#5704,1.);+#5704 = DIRECTION('',(0.,-1.));+#5705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5706 = ORIENTED_EDGE('',*,*,#5490,.T.);+#5707 = ADVANCED_FACE('',(#5708),#2663,.F.);+#5708 = FACE_BOUND('',#5709,.F.);+#5709 = EDGE_LOOP('',(#5710,#5711,#5732,#5733));+#5710 = ORIENTED_EDGE('',*,*,#2647,.T.);+#5711 = ORIENTED_EDGE('',*,*,#5712,.F.);+#5712 = EDGE_CURVE('',#5514,#2615,#5713,.T.);+#5713 = SURFACE_CURVE('',#5714,(#5718,#5725),.PCURVE_S1.);+#5714 = LINE('',#5715,#5716);+#5715 = CARTESIAN_POINT('',(0.774462032821,3.260692661493,+    9.314404469578E-02));+#5716 = VECTOR('',#5717,1.);+#5717 = DIRECTION('',(2.498787288469E-11,0.,-1.));+#5718 = PCURVE('',#2663,#5719);+#5719 = DEFINITIONAL_REPRESENTATION('',(#5720),#5724);+#5720 = LINE('',#5721,#5722);+#5721 = CARTESIAN_POINT('',(0.699999993404,0.));+#5722 = VECTOR('',#5723,1.);+#5723 = DIRECTION('',(2.498787288469E-11,-1.));+#5724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5725 = PCURVE('',#2635,#5726);+#5726 = DEFINITIONAL_REPRESENTATION('',(#5727),#5731);+#5727 = LINE('',#5728,#5729);+#5728 = CARTESIAN_POINT('',(3.141592653662,4.74770178934E-22));+#5729 = VECTOR('',#5730,1.);+#5730 = DIRECTION('',(-1.999029830775E-10,1.));+#5731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5732 = ORIENTED_EDGE('',*,*,#5513,.F.);+#5733 = ORIENTED_EDGE('',*,*,#5686,.T.);+#5734 = ADVANCED_FACE('',(#5735),#2635,.F.);+#5735 = FACE_BOUND('',#5736,.F.);+#5736 = EDGE_LOOP('',(#5737,#5738,#5759,#5760));+#5737 = ORIENTED_EDGE('',*,*,#2614,.F.);+#5738 = ORIENTED_EDGE('',*,*,#5739,.T.);+#5739 = EDGE_CURVE('',#2587,#5537,#5740,.T.);+#5740 = SURFACE_CURVE('',#5741,(#5745,#5752),.PCURVE_S1.);+#5741 = LINE('',#5742,#5743);+#5742 = CARTESIAN_POINT('',(0.774462032823,3.510692661497,0.));+#5743 = VECTOR('',#5744,1.);+#5744 = DIRECTION('',(-2.498548900061E-11,0.,1.));+#5745 = PCURVE('',#2635,#5746);+#5746 = DEFINITIONAL_REPRESENTATION('',(#5747),#5751);+#5747 = LINE('',#5748,#5749);+#5748 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#5749 = VECTOR('',#5750,1.);+#5750 = DIRECTION('',(0.,-1.));+#5751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5752 = PCURVE('',#2602,#5753);+#5753 = DEFINITIONAL_REPRESENTATION('',(#5754),#5758);+#5754 = LINE('',#5755,#5756);+#5755 = CARTESIAN_POINT('',(-0.624999993427,-9.314404469578E-02));+#5756 = VECTOR('',#5757,1.);+#5757 = DIRECTION('',(2.498548900061E-11,1.));+#5758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5759 = ORIENTED_EDGE('',*,*,#5536,.T.);+#5760 = ORIENTED_EDGE('',*,*,#5712,.T.);+#5761 = ADVANCED_FACE('',(#5762),#2602,.F.);+#5762 = FACE_BOUND('',#5763,.F.);+#5763 = EDGE_LOOP('',(#5764,#5765,#5786,#5787));+#5764 = ORIENTED_EDGE('',*,*,#2586,.T.);+#5765 = ORIENTED_EDGE('',*,*,#5766,.T.);+#5766 = EDGE_CURVE('',#2559,#5565,#5767,.T.);+#5767 = SURFACE_CURVE('',#5768,(#5772,#5779),.PCURVE_S1.);+#5768 = LINE('',#5769,#5770);+#5769 = CARTESIAN_POINT('',(7.446203942479E-02,3.510692661498,0.));+#5770 = VECTOR('',#5771,1.);+#5771 = DIRECTION('',(0.,0.,1.));+#5772 = PCURVE('',#2602,#5773);+#5773 = DEFINITIONAL_REPRESENTATION('',(#5774),#5778);+#5774 = LINE('',#5775,#5776);+#5775 = CARTESIAN_POINT('',(7.499999997121E-02,-9.314404469578E-02));+#5776 = VECTOR('',#5777,1.);+#5777 = DIRECTION('',(0.,1.));+#5778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5779 = PCURVE('',#2574,#5780);+#5780 = DEFINITIONAL_REPRESENTATION('',(#5781),#5785);+#5781 = LINE('',#5782,#5783);+#5782 = CARTESIAN_POINT('',(8.276473279185E-02,9.314404469578E-02));+#5783 = VECTOR('',#5784,1.);+#5784 = DIRECTION('',(0.,-1.));+#5785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5786 = ORIENTED_EDGE('',*,*,#5564,.F.);+#5787 = ORIENTED_EDGE('',*,*,#5739,.F.);+#5788 = ADVANCED_FACE('',(#5789),#2574,.F.);+#5789 = FACE_BOUND('',#5790,.F.);+#5790 = EDGE_LOOP('',(#5791,#5792,#5793,#5794));+#5791 = ORIENTED_EDGE('',*,*,#4381,.T.);+#5792 = ORIENTED_EDGE('',*,*,#5587,.T.);+#5793 = ORIENTED_EDGE('',*,*,#5766,.F.);+#5794 = ORIENTED_EDGE('',*,*,#2558,.F.);+#5795 = ADVANCED_FACE('',(#5796),#4346,.T.);+#5796 = FACE_BOUND('',#5797,.F.);+#5797 = EDGE_LOOP('',(#5798,#5799,#5822,#5843));+#5798 = ORIENTED_EDGE('',*,*,#4330,.F.);+#5799 = ORIENTED_EDGE('',*,*,#5800,.F.);+#5800 = EDGE_CURVE('',#5801,#4303,#5803,.T.);+#5801 = VERTEX_POINT('',#5802);+#5802 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+    0.193144044696));+#5803 = SURFACE_CURVE('',#5804,(#5808,#5815),.PCURVE_S1.);+#5804 = LINE('',#5805,#5806);+#5805 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+    0.193144044696));+#5806 = VECTOR('',#5807,1.);+#5807 = DIRECTION('',(-1.,0.,0.));+#5808 = PCURVE('',#4346,#5809);+#5809 = DEFINITIONAL_REPRESENTATION('',(#5810),#5814);+#5810 = LINE('',#5811,#5812);+#5811 = CARTESIAN_POINT('',(1.711550788605E-02,0.));+#5812 = VECTOR('',#5813,1.);+#5813 = DIRECTION('',(1.,0.));+#5814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5815 = PCURVE('',#4318,#5816);+#5816 = DEFINITIONAL_REPRESENTATION('',(#5817),#5821);+#5817 = LINE('',#5818,#5819);+#5818 = CARTESIAN_POINT('',(-0.626839066292,7.5022189799E-02));+#5819 = VECTOR('',#5820,1.);+#5820 = DIRECTION('',(-1.,0.));+#5821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5822 = ORIENTED_EDGE('',*,*,#5823,.T.);+#5823 = EDGE_CURVE('',#5801,#5610,#5824,.T.);+#5824 = SURFACE_CURVE('',#5825,(#5829,#5836),.PCURVE_S1.);+#5825 = LINE('',#5826,#5827);+#5826 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+    0.193144044696));+#5827 = VECTOR('',#5828,1.);+#5828 = DIRECTION('',(0.,0.,-1.));+#5829 = PCURVE('',#4346,#5830);+#5830 = DEFINITIONAL_REPRESENTATION('',(#5831),#5835);+#5831 = LINE('',#5832,#5833);+#5832 = CARTESIAN_POINT('',(1.711550788605E-02,0.));+#5833 = VECTOR('',#5834,1.);+#5834 = DIRECTION('',(0.,1.));+#5835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5836 = PCURVE('',#5648,#5837);+#5837 = DEFINITIONAL_REPRESENTATION('',(#5838),#5842);+#5838 = LINE('',#5839,#5840);+#5839 = CARTESIAN_POINT('',(0.171908858971,0.));+#5840 = VECTOR('',#5841,1.);+#5841 = DIRECTION('',(0.,-1.));+#5842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5843 = ORIENTED_EDGE('',*,*,#5609,.F.);+#5844 = ADVANCED_FACE('',(#5845),#4318,.F.);+#5845 = FACE_BOUND('',#5846,.F.);+#5846 = EDGE_LOOP('',(#5847,#5848,#5871,#5892));+#5847 = ORIENTED_EDGE('',*,*,#4302,.F.);+#5848 = ORIENTED_EDGE('',*,*,#5849,.F.);+#5849 = EDGE_CURVE('',#5850,#4275,#5852,.T.);+#5850 = VERTEX_POINT('',#5851);+#5851 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+    0.193144044696));+#5852 = SURFACE_CURVE('',#5853,(#5857,#5864),.PCURVE_S1.);+#5853 = LINE('',#5854,#5855);+#5854 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+    0.193144044696));+#5855 = VECTOR('',#5856,1.);+#5856 = DIRECTION('',(-1.,0.,0.));+#5857 = PCURVE('',#4318,#5858);+#5858 = DEFINITIONAL_REPRESENTATION('',(#5859),#5863);+#5859 = LINE('',#5860,#5861);+#5860 = CARTESIAN_POINT('',(-0.626839066292,-4.977810199E-03));+#5861 = VECTOR('',#5862,1.);+#5862 = DIRECTION('',(-1.,0.));+#5863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5864 = PCURVE('',#4290,#5865);+#5865 = DEFINITIONAL_REPRESENTATION('',(#5866),#5870);+#5866 = LINE('',#5867,#5868);+#5867 = CARTESIAN_POINT('',(0.117884492123,0.));+#5868 = VECTOR('',#5869,1.);+#5869 = DIRECTION('',(-1.,0.));+#5870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5871 = ORIENTED_EDGE('',*,*,#5872,.T.);+#5872 = EDGE_CURVE('',#5850,#5801,#5873,.T.);+#5873 = SURFACE_CURVE('',#5874,(#5878,#5885),.PCURVE_S1.);+#5874 = LINE('',#5875,#5876);+#5875 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+    0.193144044696));+#5876 = VECTOR('',#5877,1.);+#5877 = DIRECTION('',(0.,1.,0.));+#5878 = PCURVE('',#4318,#5879);+#5879 = DEFINITIONAL_REPRESENTATION('',(#5880),#5884);+#5880 = LINE('',#5881,#5882);+#5881 = CARTESIAN_POINT('',(-0.626839066292,-4.977810199E-03));+#5882 = VECTOR('',#5883,1.);+#5883 = DIRECTION('',(0.,1.));+#5884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5885 = PCURVE('',#5648,#5886);+#5886 = DEFINITIONAL_REPRESENTATION('',(#5887),#5891);+#5887 = LINE('',#5888,#5889);+#5888 = CARTESIAN_POINT('',(0.251908858969,0.));+#5889 = VECTOR('',#5890,1.);+#5890 = DIRECTION('',(-1.,0.));+#5891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5892 = ORIENTED_EDGE('',*,*,#5800,.T.);+#5893 = ADVANCED_FACE('',(#5894),#4290,.T.);+#5894 = FACE_BOUND('',#5895,.F.);+#5895 = EDGE_LOOP('',(#5896,#5897,#5898,#5919));+#5896 = ORIENTED_EDGE('',*,*,#4274,.T.);+#5897 = ORIENTED_EDGE('',*,*,#5660,.F.);+#5898 = ORIENTED_EDGE('',*,*,#5899,.F.);+#5899 = EDGE_CURVE('',#5850,#5633,#5900,.T.);+#5900 = SURFACE_CURVE('',#5901,(#5905,#5912),.PCURVE_S1.);+#5901 = LINE('',#5902,#5903);+#5902 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+    0.193144044696));+#5903 = VECTOR('',#5904,1.);+#5904 = DIRECTION('',(0.,0.,-1.));+#5905 = PCURVE('',#4290,#5906);+#5906 = DEFINITIONAL_REPRESENTATION('',(#5907),#5911);+#5907 = LINE('',#5908,#5909);+#5908 = CARTESIAN_POINT('',(0.117884492123,0.));+#5909 = VECTOR('',#5910,1.);+#5910 = DIRECTION('',(0.,1.));+#5911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5912 = PCURVE('',#5648,#5913);+#5913 = DEFINITIONAL_REPRESENTATION('',(#5914),#5918);+#5914 = LINE('',#5915,#5916);+#5915 = CARTESIAN_POINT('',(0.251908858969,0.));+#5916 = VECTOR('',#5917,1.);+#5917 = DIRECTION('',(0.,-1.));+#5918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5919 = ORIENTED_EDGE('',*,*,#5849,.T.);+#5920 = ADVANCED_FACE('',(#5921),#5648,.T.);+#5921 = FACE_BOUND('',#5922,.F.);+#5922 = EDGE_LOOP('',(#5923,#5924,#5925,#5926));+#5923 = ORIENTED_EDGE('',*,*,#5823,.F.);+#5924 = ORIENTED_EDGE('',*,*,#5872,.F.);+#5925 = ORIENTED_EDGE('',*,*,#5899,.T.);+#5926 = ORIENTED_EDGE('',*,*,#5632,.F.);+#5927 = ADVANCED_FACE('',(#5928),#2523,.F.);+#5928 = FACE_BOUND('',#5929,.F.);+#5929 = EDGE_LOOP('',(#5930,#5931,#5932,#5955));+#5930 = ORIENTED_EDGE('',*,*,#4403,.F.);+#5931 = ORIENTED_EDGE('',*,*,#2507,.T.);+#5932 = ORIENTED_EDGE('',*,*,#5933,.F.);+#5933 = EDGE_CURVE('',#5934,#2480,#5936,.T.);+#5934 = VERTEX_POINT('',#5935);+#5935 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+    9.314404469578E-02));+#5936 = SURFACE_CURVE('',#5937,(#5941,#5948),.PCURVE_S1.);+#5937 = LINE('',#5938,#5939);+#5938 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+    9.314404469578E-02));+#5939 = VECTOR('',#5940,1.);+#5940 = DIRECTION('',(1.609121751304E-14,-1.907107260804E-14,-1.));+#5941 = PCURVE('',#2523,#5942);+#5942 = DEFINITIONAL_REPRESENTATION('',(#5943),#5947);+#5943 = LINE('',#5944,#5945);+#5944 = CARTESIAN_POINT('',(8.276473407039E-02,0.));+#5945 = VECTOR('',#5946,1.);+#5946 = DIRECTION('',(2.264646942666E-14,-1.));+#5947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5948 = PCURVE('',#2495,#5949);+#5949 = DEFINITIONAL_REPRESENTATION('',(#5950),#5954);+#5950 = LINE('',#5951,#5952);+#5951 = CARTESIAN_POINT('',(-1.000588500943E-14,0.));+#5952 = VECTOR('',#5953,1.);+#5953 = DIRECTION('',(1.609121751304E-14,-1.));+#5954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5955 = ORIENTED_EDGE('',*,*,#5956,.T.);+#5956 = EDGE_CURVE('',#5934,#4404,#5957,.T.);+#5957 = SURFACE_CURVE('',#5958,(#5962,#5969),.PCURVE_S1.);+#5958 = LINE('',#5959,#5960);+#5959 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+    9.314404469578E-02));+#5960 = VECTOR('',#5961,1.);+#5961 = DIRECTION('',(-0.90618313999,0.422885465343,0.));+#5962 = PCURVE('',#2523,#5963);+#5963 = DEFINITIONAL_REPRESENTATION('',(#5964),#5968);+#5964 = LINE('',#5965,#5966);+#5965 = CARTESIAN_POINT('',(8.276473407039E-02,0.));+#5966 = VECTOR('',#5967,1.);+#5967 = DIRECTION('',(-1.,0.));+#5968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5969 = PCURVE('',#4442,#5970);+#5970 = DEFINITIONAL_REPRESENTATION('',(#5971),#5975);+#5971 = LINE('',#5972,#5973);+#5972 = CARTESIAN_POINT('',(-0.382684201714,-0.191064392609));+#5973 = VECTOR('',#5974,1.);+#5974 = DIRECTION('',(-0.90618313999,0.422885465343));+#5975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5976 = ADVANCED_FACE('',(#5977),#2495,.F.);+#5977 = FACE_BOUND('',#5978,.F.);+#5978 = EDGE_LOOP('',(#5979,#5980,#6003,#6024));+#5979 = ORIENTED_EDGE('',*,*,#2479,.T.);+#5980 = ORIENTED_EDGE('',*,*,#5981,.T.);+#5981 = EDGE_CURVE('',#2452,#5982,#5984,.T.);+#5982 = VERTEX_POINT('',#5983);+#5983 = CARTESIAN_POINT('',(0.724462039428,4.010692661499,+    9.314404469578E-02));+#5984 = SURFACE_CURVE('',#5985,(#5989,#5996),.PCURVE_S1.);+#5985 = LINE('',#5986,#5987);+#5986 = CARTESIAN_POINT('',(0.724462039428,4.010692661499,0.));+#5987 = VECTOR('',#5988,1.);+#5988 = DIRECTION('',(0.,0.,1.));+#5989 = PCURVE('',#2495,#5990);+#5990 = DEFINITIONAL_REPRESENTATION('',(#5991),#5995);+#5991 = LINE('',#5992,#5993);+#5992 = CARTESIAN_POINT('',(0.649999993408,-9.314404469578E-02));+#5993 = VECTOR('',#5994,1.);+#5994 = DIRECTION('',(0.,1.));+#5995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5996 = PCURVE('',#2467,#5997);+#5997 = DEFINITIONAL_REPRESENTATION('',(#5998),#6002);+#5998 = LINE('',#5999,#6000);+#5999 = CARTESIAN_POINT('',(0.28284271247,9.314404469578E-02));+#6000 = VECTOR('',#6001,1.);+#6001 = DIRECTION('',(0.,-1.));+#6002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6003 = ORIENTED_EDGE('',*,*,#6004,.F.);+#6004 = EDGE_CURVE('',#5934,#5982,#6005,.T.);+#6005 = SURFACE_CURVE('',#6006,(#6010,#6017),.PCURVE_S1.);+#6006 = LINE('',#6007,#6008);+#6007 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+    9.314404469578E-02));+#6008 = VECTOR('',#6009,1.);+#6009 = DIRECTION('',(1.,0.,0.));+#6010 = PCURVE('',#2495,#6011);+#6011 = DEFINITIONAL_REPRESENTATION('',(#6012),#6016);+#6012 = LINE('',#6013,#6014);+#6013 = CARTESIAN_POINT('',(-1.000588500943E-14,0.));+#6014 = VECTOR('',#6015,1.);+#6015 = DIRECTION('',(1.,0.));+#6016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6017 = PCURVE('',#4442,#6018);+#6018 = DEFINITIONAL_REPRESENTATION('',(#6019),#6023);+#6019 = LINE('',#6020,#6021);+#6020 = CARTESIAN_POINT('',(-0.382684201714,-0.191064392609));+#6021 = VECTOR('',#6022,1.);+#6022 = DIRECTION('',(1.,0.));+#6023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6024 = ORIENTED_EDGE('',*,*,#5933,.T.);+#6025 = ADVANCED_FACE('',(#6026),#2467,.F.);+#6026 = FACE_BOUND('',#6027,.F.);+#6027 = EDGE_LOOP('',(#6028,#6029,#6052,#6073));+#6028 = ORIENTED_EDGE('',*,*,#2451,.F.);+#6029 = ORIENTED_EDGE('',*,*,#6030,.T.);+#6030 = EDGE_CURVE('',#2424,#6031,#6033,.T.);+#6031 = VERTEX_POINT('',#6032);+#6032 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+    9.314404469578E-02));+#6033 = SURFACE_CURVE('',#6034,(#6038,#6045),.PCURVE_S1.);+#6034 = LINE('',#6035,#6036);+#6035 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,0.));+#6036 = VECTOR('',#6037,1.);+#6037 = DIRECTION('',(0.,0.,1.));+#6038 = PCURVE('',#2467,#6039);+#6039 = DEFINITIONAL_REPRESENTATION('',(#6040),#6044);+#6040 = LINE('',#6041,#6042);+#6041 = CARTESIAN_POINT('',(-0.,9.314404469578E-02));+#6042 = VECTOR('',#6043,1.);+#6043 = DIRECTION('',(0.,-1.));+#6044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6045 = PCURVE('',#2439,#6046);+#6046 = DEFINITIONAL_REPRESENTATION('',(#6047),#6051);+#6047 = LINE('',#6048,#6049);+#6048 = CARTESIAN_POINT('',(0.297798440887,-9.314404469578E-02));+#6049 = VECTOR('',#6050,1.);+#6050 = DIRECTION('',(0.,1.));+#6051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6052 = ORIENTED_EDGE('',*,*,#6053,.T.);+#6053 = EDGE_CURVE('',#6031,#5982,#6054,.T.);+#6054 = SURFACE_CURVE('',#6055,(#6059,#6066),.PCURVE_S1.);+#6055 = LINE('',#6056,#6057);+#6056 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+    9.314404469578E-02));+#6057 = VECTOR('',#6058,1.);+#6058 = DIRECTION('',(-0.707106781195,-0.707106781178,0.));+#6059 = PCURVE('',#2467,#6060);+#6060 = DEFINITIONAL_REPRESENTATION('',(#6061),#6065);+#6061 = LINE('',#6062,#6063);+#6062 = CARTESIAN_POINT('',(0.,0.));+#6063 = VECTOR('',#6064,1.);+#6064 = DIRECTION('',(1.,0.));+#6065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6066 = PCURVE('',#4442,#6067);+#6067 = DEFINITIONAL_REPRESENTATION('',(#6068),#6072);+#6068 = LINE('',#6069,#6070);+#6069 = CARTESIAN_POINT('',(0.467315791693,8.935607386E-03));+#6070 = VECTOR('',#6071,1.);+#6071 = DIRECTION('',(-0.707106781195,-0.707106781178));+#6072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6073 = ORIENTED_EDGE('',*,*,#5981,.F.);+#6074 = ADVANCED_FACE('',(#6075),#6089,.F.);+#6075 = FACE_BOUND('',#6076,.F.);+#6076 = EDGE_LOOP('',(#6077,#6107,#6135,#6163));+#6077 = ORIENTED_EDGE('',*,*,#6078,.T.);+#6078 = EDGE_CURVE('',#6079,#6081,#6083,.T.);+#6079 = VERTEX_POINT('',#6080);+#6080 = CARTESIAN_POINT('',(0.924462039427,4.5,9.314404469578E-02));+#6081 = VERTEX_POINT('',#6082);+#6082 = CARTESIAN_POINT('',(0.924462039427,4.5,0.193144044696));+#6083 = SURFACE_CURVE('',#6084,(#6088,#6100),.PCURVE_S1.);+#6084 = LINE('',#6085,#6086);+#6085 = CARTESIAN_POINT('',(0.924462039427,4.5,9.314404469578E-02));+#6086 = VECTOR('',#6087,1.);+#6087 = DIRECTION('',(0.,0.,1.));+#6088 = PCURVE('',#6089,#6094);+#6089 = PLANE('',#6090);+#6090 = AXIS2_PLACEMENT_3D('',#6091,#6092,#6093);+#6091 = CARTESIAN_POINT('',(0.924462039427,3.912894220607,+    9.314404469578E-02));+#6092 = DIRECTION('',(1.,0.,0.));+#6093 = DIRECTION('',(-0.,1.,0.));+#6094 = DEFINITIONAL_REPRESENTATION('',(#6095),#6099);+#6095 = LINE('',#6096,#6097);+#6096 = CARTESIAN_POINT('',(0.587105779393,0.));+#6097 = VECTOR('',#6098,1.);+#6098 = DIRECTION('',(0.,1.));+#6099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6100 = PCURVE('',#168,#6101);+#6101 = DEFINITIONAL_REPRESENTATION('',(#6102),#6106);+#6102 = LINE('',#6103,#6104);+#6103 = CARTESIAN_POINT('',(2.575537960573,9.314404469578E-02));+#6104 = VECTOR('',#6105,1.);+#6105 = DIRECTION('',(0.,1.));+#6106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6107 = ORIENTED_EDGE('',*,*,#6108,.F.);+#6108 = EDGE_CURVE('',#6109,#6081,#6111,.T.);+#6109 = VERTEX_POINT('',#6110);+#6110 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+    ));+#6111 = SURFACE_CURVE('',#6112,(#6116,#6123),.PCURVE_S1.);+#6112 = LINE('',#6113,#6114);+#6113 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+    ));+#6114 = VECTOR('',#6115,1.);+#6115 = DIRECTION('',(0.,1.,0.));+#6116 = PCURVE('',#6089,#6117);+#6117 = DEFINITIONAL_REPRESENTATION('',(#6118),#6122);+#6118 = LINE('',#6119,#6120);+#6119 = CARTESIAN_POINT('',(0.489381425964,0.1));+#6120 = VECTOR('',#6121,1.);+#6121 = DIRECTION('',(1.,0.));+#6122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6123 = PCURVE('',#6124,#6129);+#6124 = PLANE('',#6125);+#6125 = AXIS2_PLACEMENT_3D('',#6126,#6127,#6128);+#6126 = CARTESIAN_POINT('',(0.701675974295,4.003933868083,0.193144044696+    ));+#6127 = DIRECTION('',(0.,0.,1.));+#6128 = DIRECTION('',(1.,0.,-0.));+#6129 = DEFINITIONAL_REPRESENTATION('',(#6130),#6134);+#6130 = LINE('',#6131,#6132);+#6131 = CARTESIAN_POINT('',(0.222786065132,0.398341778488));+#6132 = VECTOR('',#6133,1.);+#6133 = DIRECTION('',(0.,1.));+#6134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6135 = ORIENTED_EDGE('',*,*,#6136,.T.);+#6136 = EDGE_CURVE('',#6109,#6137,#6139,.T.);+#6137 = VERTEX_POINT('',#6138);+#6138 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,+    9.314404469578E-02));+#6139 = SURFACE_CURVE('',#6140,(#6144,#6151),.PCURVE_S1.);+#6140 = LINE('',#6141,#6142);+#6141 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+    ));+#6142 = VECTOR('',#6143,1.);+#6143 = DIRECTION('',(0.,0.,-1.));+#6144 = PCURVE('',#6089,#6145);+#6145 = DEFINITIONAL_REPRESENTATION('',(#6146),#6150);+#6146 = LINE('',#6147,#6148);+#6147 = CARTESIAN_POINT('',(0.489381425964,0.1));+#6148 = VECTOR('',#6149,1.);+#6149 = DIRECTION('',(0.,-1.));+#6150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6151 = PCURVE('',#6152,#6157);+#6152 = PLANE('',#6153);+#6153 = AXIS2_PLACEMENT_3D('',#6154,#6155,#6156);+#6154 = CARTESIAN_POINT('',(1.393162497442,4.402275646571,0.193144044696+    ));+#6155 = DIRECTION('',(0.,1.,0.));+#6156 = DIRECTION('',(-1.,0.,0.));+#6157 = DEFINITIONAL_REPRESENTATION('',(#6158),#6162);+#6158 = LINE('',#6159,#6160);+#6159 = CARTESIAN_POINT('',(0.468700458015,0.));+#6160 = VECTOR('',#6161,1.);+#6161 = DIRECTION('',(0.,-1.));+#6162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6163 = ORIENTED_EDGE('',*,*,#6164,.T.);+#6164 = EDGE_CURVE('',#6137,#6079,#6165,.T.);+#6165 = SURFACE_CURVE('',#6166,(#6170,#6177),.PCURVE_S1.);+#6166 = LINE('',#6167,#6168);+#6167 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,+    9.314404469578E-02));+#6168 = VECTOR('',#6169,1.);+#6169 = DIRECTION('',(0.,1.,0.));+#6170 = PCURVE('',#6089,#6171);+#6171 = DEFINITIONAL_REPRESENTATION('',(#6172),#6176);+#6172 = LINE('',#6173,#6174);+#6173 = CARTESIAN_POINT('',(0.489381425964,0.));+#6174 = VECTOR('',#6175,1.);+#6175 = DIRECTION('',(1.,0.));+#6176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6177 = PCURVE('',#6178,#6183);+#6178 = PLANE('',#6179);+#6179 = AXIS2_PLACEMENT_3D('',#6180,#6181,#6182);+#6180 = CARTESIAN_POINT('',(0.701675974295,4.003933868083,+    9.314404469578E-02));+#6181 = DIRECTION('',(0.,0.,1.));+#6182 = DIRECTION('',(1.,0.,-0.));+#6183 = DEFINITIONAL_REPRESENTATION('',(#6184),#6188);+#6184 = LINE('',#6185,#6186);+#6185 = CARTESIAN_POINT('',(0.222786065132,0.398341778488));+#6186 = VECTOR('',#6187,1.);+#6187 = DIRECTION('',(0.,1.));+#6188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6189 = ADVANCED_FACE('',(#6190),#2439,.F.);+#6190 = FACE_BOUND('',#6191,.F.);+#6191 = EDGE_LOOP('',(#6192,#6193,#6216,#6237));+#6192 = ORIENTED_EDGE('',*,*,#2423,.F.);+#6193 = ORIENTED_EDGE('',*,*,#6194,.T.);+#6194 = EDGE_CURVE('',#2396,#6195,#6197,.T.);+#6195 = VERTEX_POINT('',#6196);+#6196 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,+    9.314404469578E-02));+#6197 = SURFACE_CURVE('',#6198,(#6202,#6209),.PCURVE_S1.);+#6198 = LINE('',#6199,#6200);+#6199 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#6200 = VECTOR('',#6201,1.);+#6201 = DIRECTION('',(0.,0.,1.));+#6202 = PCURVE('',#2439,#6203);+#6203 = DEFINITIONAL_REPRESENTATION('',(#6204),#6208);+#6204 = LINE('',#6205,#6206);+#6205 = CARTESIAN_POINT('',(0.472798440887,-9.314404469578E-02));+#6206 = VECTOR('',#6207,1.);+#6207 = DIRECTION('',(0.,1.));+#6208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6209 = PCURVE('',#2411,#6210);+#6210 = DEFINITIONAL_REPRESENTATION('',(#6211),#6215);+#6211 = LINE('',#6212,#6213);+#6212 = CARTESIAN_POINT('',(-0.10000000002,-9.314404469578E-02));+#6213 = VECTOR('',#6214,1.);+#6214 = DIRECTION('',(0.,1.));+#6215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6216 = ORIENTED_EDGE('',*,*,#6217,.F.);+#6217 = EDGE_CURVE('',#6031,#6195,#6218,.T.);+#6218 = SURFACE_CURVE('',#6219,(#6223,#6230),.PCURVE_S1.);+#6219 = LINE('',#6220,#6221);+#6220 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+    9.314404469578E-02));+#6221 = VECTOR('',#6222,1.);+#6222 = DIRECTION('',(0.,1.,0.));+#6223 = PCURVE('',#2439,#6224);+#6224 = DEFINITIONAL_REPRESENTATION('',(#6225),#6229);+#6225 = LINE('',#6226,#6227);+#6226 = CARTESIAN_POINT('',(0.297798440887,0.));+#6227 = VECTOR('',#6228,1.);+#6228 = DIRECTION('',(1.,0.));+#6229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6230 = PCURVE('',#4442,#6231);+#6231 = DEFINITIONAL_REPRESENTATION('',(#6232),#6236);+#6232 = LINE('',#6233,#6234);+#6233 = CARTESIAN_POINT('',(0.467315791693,8.935607386E-03));+#6234 = VECTOR('',#6235,1.);+#6235 = DIRECTION('',(0.,1.));+#6236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6237 = ORIENTED_EDGE('',*,*,#6030,.F.);+#6238 = ADVANCED_FACE('',(#6239,#6805),#168,.T.);+#6239 = FACE_BOUND('',#6240,.F.);+#6240 = EDGE_LOOP('',(#6241,#6271,#6299,#6327,#6355,#6378,#6399,#6400,+    #6423,#6451,#6479,#6507,#6535,#6558,#6579,#6580,#6601,#6602,#6603,+    #6604,#6627,#6655,#6683,#6711,#6739,#6762,#6783,#6784));+#6241 = ORIENTED_EDGE('',*,*,#6242,.T.);+#6242 = EDGE_CURVE('',#6243,#6245,#6247,.T.);+#6243 = VERTEX_POINT('',#6244);+#6244 = CARTESIAN_POINT('',(1.659462039431,4.5,9.314404469578E-02));+#6245 = VERTEX_POINT('',#6246);+#6246 = CARTESIAN_POINT('',(1.7092586783,4.5,9.314404469578E-02));+#6247 = SURFACE_CURVE('',#6248,(#6252,#6259),.PCURVE_S1.);+#6248 = LINE('',#6249,#6250);+#6249 = CARTESIAN_POINT('',(1.659462039431,4.5,9.314404469578E-02));+#6250 = VECTOR('',#6251,1.);+#6251 = DIRECTION('',(1.,0.,0.));+#6252 = PCURVE('',#168,#6253);+#6253 = DEFINITIONAL_REPRESENTATION('',(#6254),#6258);+#6254 = LINE('',#6255,#6256);+#6255 = CARTESIAN_POINT('',(1.840537960569,9.314404469578E-02));+#6256 = VECTOR('',#6257,1.);+#6257 = DIRECTION('',(-1.,0.));+#6258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6259 = PCURVE('',#6260,#6265);+#6260 = PLANE('',#6261);+#6261 = AXIS2_PLACEMENT_3D('',#6262,#6263,#6264);+#6262 = CARTESIAN_POINT('',(1.749462039413,3.8473349245,+    9.314404469578E-02));+#6263 = DIRECTION('',(0.,0.,1.));+#6264 = DIRECTION('',(1.,0.,-0.));+#6265 = DEFINITIONAL_REPRESENTATION('',(#6266),#6270);+#6266 = LINE('',#6267,#6268);+#6267 = CARTESIAN_POINT('',(-8.9999999982E-02,0.6526650755));+#6268 = VECTOR('',#6269,1.);+#6269 = DIRECTION('',(1.,0.));+#6270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6271 = ORIENTED_EDGE('',*,*,#6272,.F.);+#6272 = EDGE_CURVE('',#6273,#6245,#6275,.T.);+#6273 = VERTEX_POINT('',#6274);+#6274 = CARTESIAN_POINT('',(1.7092586783,4.5,0.193144044696));+#6275 = SURFACE_CURVE('',#6276,(#6280,#6287),.PCURVE_S1.);+#6276 = LINE('',#6277,#6278);+#6277 = CARTESIAN_POINT('',(1.7092586783,4.5,0.193144044696));+#6278 = VECTOR('',#6279,1.);+#6279 = DIRECTION('',(0.,0.,-1.));+#6280 = PCURVE('',#168,#6281);+#6281 = DEFINITIONAL_REPRESENTATION('',(#6282),#6286);+#6282 = LINE('',#6283,#6284);+#6283 = CARTESIAN_POINT('',(1.7907413217,0.193144044696));+#6284 = VECTOR('',#6285,1.);+#6285 = DIRECTION('',(0.,-1.));+#6286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6287 = PCURVE('',#6288,#6293);+#6288 = PLANE('',#6289);+#6289 = AXIS2_PLACEMENT_3D('',#6290,#6291,#6292);+#6290 = CARTESIAN_POINT('',(1.7092586783,4.560983911448,0.193144044696)+  );+#6291 = DIRECTION('',(1.,0.,0.));+#6292 = DIRECTION('',(0.,-1.,0.));+#6293 = DEFINITIONAL_REPRESENTATION('',(#6294),#6298);+#6294 = LINE('',#6295,#6296);+#6295 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#6296 = VECTOR('',#6297,1.);+#6297 = DIRECTION('',(0.,1.));+#6298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6299 = ORIENTED_EDGE('',*,*,#6300,.T.);+#6300 = EDGE_CURVE('',#6273,#6301,#6303,.T.);+#6301 = VERTEX_POINT('',#6302);+#6302 = CARTESIAN_POINT('',(1.789258678298,4.5,0.193144044696));+#6303 = SURFACE_CURVE('',#6304,(#6308,#6315),.PCURVE_S1.);+#6304 = LINE('',#6305,#6306);+#6305 = CARTESIAN_POINT('',(1.7092586783,4.5,0.193144044696));+#6306 = VECTOR('',#6307,1.);+#6307 = DIRECTION('',(1.,0.,0.));+#6308 = PCURVE('',#168,#6309);+#6309 = DEFINITIONAL_REPRESENTATION('',(#6310),#6314);+#6310 = LINE('',#6311,#6312);+#6311 = CARTESIAN_POINT('',(1.7907413217,0.193144044696));+#6312 = VECTOR('',#6313,1.);+#6313 = DIRECTION('',(-1.,0.));+#6314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6315 = PCURVE('',#6316,#6321);+#6316 = PLANE('',#6317);+#6317 = AXIS2_PLACEMENT_3D('',#6318,#6319,#6320);+#6318 = CARTESIAN_POINT('',(1.757854474328,3.758446184763,0.193144044696+    ));+#6319 = DIRECTION('',(0.,0.,1.));+#6320 = DIRECTION('',(1.,0.,-0.));+#6321 = DEFINITIONAL_REPRESENTATION('',(#6322),#6326);+#6322 = LINE('',#6323,#6324);+#6323 = CARTESIAN_POINT('',(-4.8595796028E-02,0.741553815237));+#6324 = VECTOR('',#6325,1.);+#6325 = DIRECTION('',(1.,0.));+#6326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6327 = ORIENTED_EDGE('',*,*,#6328,.T.);+#6328 = EDGE_CURVE('',#6301,#6329,#6331,.T.);+#6329 = VERTEX_POINT('',#6330);+#6330 = CARTESIAN_POINT('',(1.789258678298,4.5,9.314404469578E-02));+#6331 = SURFACE_CURVE('',#6332,(#6336,#6343),.PCURVE_S1.);+#6332 = LINE('',#6333,#6334);+#6333 = CARTESIAN_POINT('',(1.789258678298,4.5,0.193144044696));+#6334 = VECTOR('',#6335,1.);+#6335 = DIRECTION('',(0.,0.,-1.));+#6336 = PCURVE('',#168,#6337);+#6337 = DEFINITIONAL_REPRESENTATION('',(#6338),#6342);+#6338 = LINE('',#6339,#6340);+#6339 = CARTESIAN_POINT('',(1.710741321702,0.193144044696));+#6340 = VECTOR('',#6341,1.);+#6341 = DIRECTION('',(0.,-1.));+#6342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6343 = PCURVE('',#6344,#6349);+#6344 = PLANE('',#6345);+#6345 = AXIS2_PLACEMENT_3D('',#6346,#6347,#6348);+#6346 = CARTESIAN_POINT('',(1.789258678298,4.425983911448,0.193144044696+    ));+#6347 = DIRECTION('',(-1.,0.,0.));+#6348 = DIRECTION('',(0.,1.,0.));+#6349 = DEFINITIONAL_REPRESENTATION('',(#6350),#6354);+#6350 = LINE('',#6351,#6352);+#6351 = CARTESIAN_POINT('',(7.4016088552E-02,0.));+#6352 = VECTOR('',#6353,1.);+#6353 = DIRECTION('',(0.,1.));+#6354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6355 = ORIENTED_EDGE('',*,*,#6356,.T.);+#6356 = EDGE_CURVE('',#6329,#6357,#6359,.T.);+#6357 = VERTEX_POINT('',#6358);+#6358 = CARTESIAN_POINT('',(1.839462039413,4.5,9.314404469578E-02));+#6359 = SURFACE_CURVE('',#6360,(#6364,#6371),.PCURVE_S1.);+#6360 = LINE('',#6361,#6362);+#6361 = CARTESIAN_POINT('',(1.789258678298,4.5,9.314404469578E-02));+#6362 = VECTOR('',#6363,1.);+#6363 = DIRECTION('',(1.,0.,0.));+#6364 = PCURVE('',#168,#6365);+#6365 = DEFINITIONAL_REPRESENTATION('',(#6366),#6370);+#6366 = LINE('',#6367,#6368);+#6367 = CARTESIAN_POINT('',(1.710741321702,9.314404469578E-02));+#6368 = VECTOR('',#6369,1.);+#6369 = DIRECTION('',(-1.,0.));+#6370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6371 = PCURVE('',#6260,#6372);+#6372 = DEFINITIONAL_REPRESENTATION('',(#6373),#6377);+#6373 = LINE('',#6374,#6375);+#6374 = CARTESIAN_POINT('',(3.9796638885E-02,0.6526650755));+#6375 = VECTOR('',#6376,1.);+#6376 = DIRECTION('',(1.,0.));+#6377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6378 = ORIENTED_EDGE('',*,*,#6379,.F.);+#6379 = EDGE_CURVE('',#1818,#6357,#6380,.T.);+#6380 = SURFACE_CURVE('',#6381,(#6385,#6392),.PCURVE_S1.);+#6381 = LINE('',#6382,#6383);+#6382 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#6383 = VECTOR('',#6384,1.);+#6384 = DIRECTION('',(0.,0.,1.));+#6385 = PCURVE('',#168,#6386);+#6386 = DEFINITIONAL_REPRESENTATION('',(#6387),#6391);+#6387 = LINE('',#6388,#6389);+#6388 = CARTESIAN_POINT('',(1.660537960587,0.));+#6389 = VECTOR('',#6390,1.);+#6390 = DIRECTION('',(0.,1.));+#6391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6392 = PCURVE('',#1856,#6393);+#6393 = DEFINITIONAL_REPRESENTATION('',(#6394),#6398);+#6394 = LINE('',#6395,#6396);+#6395 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#6396 = VECTOR('',#6397,1.);+#6397 = DIRECTION('',(-1.,0.));+#6398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6399 = ORIENTED_EDGE('',*,*,#1817,.T.);+#6400 = ORIENTED_EDGE('',*,*,#6401,.T.);+#6401 = EDGE_CURVE('',#1790,#6402,#6404,.T.);+#6402 = VERTEX_POINT('',#6403);+#6403 = CARTESIAN_POINT('',(2.159462039424,4.5,9.314404469578E-02));+#6404 = SURFACE_CURVE('',#6405,(#6409,#6416),.PCURVE_S1.);+#6405 = LINE('',#6406,#6407);+#6406 = CARTESIAN_POINT('',(2.159462039424,4.5,0.));+#6407 = VECTOR('',#6408,1.);+#6408 = DIRECTION('',(0.,0.,1.));+#6409 = PCURVE('',#168,#6410);+#6410 = DEFINITIONAL_REPRESENTATION('',(#6411),#6415);+#6411 = LINE('',#6412,#6413);+#6412 = CARTESIAN_POINT('',(1.340537960576,0.));+#6413 = VECTOR('',#6414,1.);+#6414 = DIRECTION('',(0.,1.));+#6415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6416 = PCURVE('',#1805,#6417);+#6417 = DEFINITIONAL_REPRESENTATION('',(#6418),#6422);+#6418 = LINE('',#6419,#6420);+#6419 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#6420 = VECTOR('',#6421,1.);+#6421 = DIRECTION('',(1.,0.));+#6422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6423 = ORIENTED_EDGE('',*,*,#6424,.T.);+#6424 = EDGE_CURVE('',#6402,#6425,#6427,.T.);+#6425 = VERTEX_POINT('',#6426);+#6426 = CARTESIAN_POINT('',(2.209258678292,4.5,9.314404469578E-02));+#6427 = SURFACE_CURVE('',#6428,(#6432,#6439),.PCURVE_S1.);+#6428 = LINE('',#6429,#6430);+#6429 = CARTESIAN_POINT('',(2.159462039424,4.5,9.314404469578E-02));+#6430 = VECTOR('',#6431,1.);+#6431 = DIRECTION('',(1.,0.,0.));+#6432 = PCURVE('',#168,#6433);+#6433 = DEFINITIONAL_REPRESENTATION('',(#6434),#6438);+#6434 = LINE('',#6435,#6436);+#6435 = CARTESIAN_POINT('',(1.340537960576,9.314404469578E-02));+#6436 = VECTOR('',#6437,1.);+#6437 = DIRECTION('',(-1.,0.));+#6438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6439 = PCURVE('',#6440,#6445);+#6440 = PLANE('',#6441);+#6441 = AXIS2_PLACEMENT_3D('',#6442,#6443,#6444);+#6442 = CARTESIAN_POINT('',(2.249462039414,4.215183972022,+    9.314404469578E-02));+#6443 = DIRECTION('',(0.,0.,1.));+#6444 = DIRECTION('',(1.,0.,-0.));+#6445 = DEFINITIONAL_REPRESENTATION('',(#6446),#6450);+#6446 = LINE('',#6447,#6448);+#6447 = CARTESIAN_POINT('',(-8.999999999E-02,0.284816027978));+#6448 = VECTOR('',#6449,1.);+#6449 = DIRECTION('',(1.,0.));+#6450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6451 = ORIENTED_EDGE('',*,*,#6452,.F.);+#6452 = EDGE_CURVE('',#6453,#6425,#6455,.T.);+#6453 = VERTEX_POINT('',#6454);+#6454 = CARTESIAN_POINT('',(2.209258678292,4.5,0.193144044696));+#6455 = SURFACE_CURVE('',#6456,(#6460,#6467),.PCURVE_S1.);+#6456 = LINE('',#6457,#6458);+#6457 = CARTESIAN_POINT('',(2.209258678292,4.5,0.193144044696));+#6458 = VECTOR('',#6459,1.);+#6459 = DIRECTION('',(0.,0.,-1.));+#6460 = PCURVE('',#168,#6461);+#6461 = DEFINITIONAL_REPRESENTATION('',(#6462),#6466);+#6462 = LINE('',#6463,#6464);+#6463 = CARTESIAN_POINT('',(1.290741321708,0.193144044696));+#6464 = VECTOR('',#6465,1.);+#6465 = DIRECTION('',(0.,-1.));+#6466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6467 = PCURVE('',#6468,#6473);+#6468 = PLANE('',#6469);+#6469 = AXIS2_PLACEMENT_3D('',#6470,#6471,#6472);+#6470 = CARTESIAN_POINT('',(2.209258678292,4.560983911448,0.193144044696+    ));+#6471 = DIRECTION('',(1.,0.,0.));+#6472 = DIRECTION('',(0.,-1.,0.));+#6473 = DEFINITIONAL_REPRESENTATION('',(#6474),#6478);+#6474 = LINE('',#6475,#6476);+#6475 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#6476 = VECTOR('',#6477,1.);+#6477 = DIRECTION('',(0.,1.));+#6478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6479 = ORIENTED_EDGE('',*,*,#6480,.T.);+#6480 = EDGE_CURVE('',#6453,#6481,#6483,.T.);+#6481 = VERTEX_POINT('',#6482);+#6482 = CARTESIAN_POINT('',(2.28925867829,4.5,0.193144044696));+#6483 = SURFACE_CURVE('',#6484,(#6488,#6495),.PCURVE_S1.);+#6484 = LINE('',#6485,#6486);+#6485 = CARTESIAN_POINT('',(2.209258678292,4.5,0.193144044696));+#6486 = VECTOR('',#6487,1.);+#6487 = DIRECTION('',(1.,0.,0.));+#6488 = PCURVE('',#168,#6489);+#6489 = DEFINITIONAL_REPRESENTATION('',(#6490),#6494);+#6490 = LINE('',#6491,#6492);+#6491 = CARTESIAN_POINT('',(1.290741321708,0.193144044696));+#6492 = VECTOR('',#6493,1.);+#6493 = DIRECTION('',(-1.,0.));+#6494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6495 = PCURVE('',#6496,#6501);+#6496 = PLANE('',#6497);+#6497 = AXIS2_PLACEMENT_3D('',#6498,#6499,#6500);+#6498 = CARTESIAN_POINT('',(2.25181286836,4.16638978575,0.193144044696)+  );+#6499 = DIRECTION('',(0.,0.,1.));+#6500 = DIRECTION('',(1.,0.,-0.));+#6501 = DEFINITIONAL_REPRESENTATION('',(#6502),#6506);+#6502 = LINE('',#6503,#6504);+#6503 = CARTESIAN_POINT('',(-4.2554190068E-02,0.33361021425));+#6504 = VECTOR('',#6505,1.);+#6505 = DIRECTION('',(1.,0.));+#6506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6507 = ORIENTED_EDGE('',*,*,#6508,.T.);+#6508 = EDGE_CURVE('',#6481,#6509,#6511,.T.);+#6509 = VERTEX_POINT('',#6510);+#6510 = CARTESIAN_POINT('',(2.28925867829,4.5,9.314404469578E-02));+#6511 = SURFACE_CURVE('',#6512,(#6516,#6523),.PCURVE_S1.);+#6512 = LINE('',#6513,#6514);+#6513 = CARTESIAN_POINT('',(2.28925867829,4.5,0.193144044696));+#6514 = VECTOR('',#6515,1.);+#6515 = DIRECTION('',(0.,0.,-1.));+#6516 = PCURVE('',#168,#6517);+#6517 = DEFINITIONAL_REPRESENTATION('',(#6518),#6522);+#6518 = LINE('',#6519,#6520);+#6519 = CARTESIAN_POINT('',(1.21074132171,0.193144044696));+#6520 = VECTOR('',#6521,1.);+#6521 = DIRECTION('',(0.,-1.));+#6522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6523 = PCURVE('',#6524,#6529);+#6524 = PLANE('',#6525);+#6525 = AXIS2_PLACEMENT_3D('',#6526,#6527,#6528);+#6526 = CARTESIAN_POINT('',(2.28925867829,4.425983911448,0.193144044696)+  );+#6527 = DIRECTION('',(-1.,0.,0.));+#6528 = DIRECTION('',(0.,1.,0.));+#6529 = DEFINITIONAL_REPRESENTATION('',(#6530),#6534);+#6530 = LINE('',#6531,#6532);+#6531 = CARTESIAN_POINT('',(7.4016088552E-02,0.));+#6532 = VECTOR('',#6533,1.);+#6533 = DIRECTION('',(0.,1.));+#6534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6535 = ORIENTED_EDGE('',*,*,#6536,.T.);+#6536 = EDGE_CURVE('',#6509,#6537,#6539,.T.);+#6537 = VERTEX_POINT('',#6538);+#6538 = CARTESIAN_POINT('',(2.339462039424,4.5,9.314404469578E-02));+#6539 = SURFACE_CURVE('',#6540,(#6544,#6551),.PCURVE_S1.);+#6540 = LINE('',#6541,#6542);+#6541 = CARTESIAN_POINT('',(2.28925867829,4.5,9.314404469578E-02));+#6542 = VECTOR('',#6543,1.);+#6543 = DIRECTION('',(1.,0.,0.));+#6544 = PCURVE('',#168,#6545);+#6545 = DEFINITIONAL_REPRESENTATION('',(#6546),#6550);+#6546 = LINE('',#6547,#6548);+#6547 = CARTESIAN_POINT('',(1.21074132171,9.314404469578E-02));+#6548 = VECTOR('',#6549,1.);+#6549 = DIRECTION('',(-1.,0.));+#6550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6551 = PCURVE('',#6440,#6552);+#6552 = DEFINITIONAL_REPRESENTATION('',(#6553),#6557);+#6553 = LINE('',#6554,#6555);+#6554 = CARTESIAN_POINT('',(3.9796638876E-02,0.284816027978));+#6555 = VECTOR('',#6556,1.);+#6556 = DIRECTION('',(1.,0.));+#6557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6558 = ORIENTED_EDGE('',*,*,#6559,.F.);+#6559 = EDGE_CURVE('',#1594,#6537,#6560,.T.);+#6560 = SURFACE_CURVE('',#6561,(#6565,#6572),.PCURVE_S1.);+#6561 = LINE('',#6562,#6563);+#6562 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#6563 = VECTOR('',#6564,1.);+#6564 = DIRECTION('',(0.,0.,1.));+#6565 = PCURVE('',#168,#6566);+#6566 = DEFINITIONAL_REPRESENTATION('',(#6567),#6571);+#6567 = LINE('',#6568,#6569);+#6568 = CARTESIAN_POINT('',(1.160537960576,0.));+#6569 = VECTOR('',#6570,1.);+#6570 = DIRECTION('',(0.,1.));+#6571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6572 = PCURVE('',#1632,#6573);+#6573 = DEFINITIONAL_REPRESENTATION('',(#6574),#6578);+#6574 = LINE('',#6575,#6576);+#6575 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#6576 = VECTOR('',#6577,1.);+#6577 = DIRECTION('',(-1.,0.));+#6578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6579 = ORIENTED_EDGE('',*,*,#1593,.T.);+#6580 = ORIENTED_EDGE('',*,*,#6581,.F.);+#6581 = EDGE_CURVE('',#153,#1571,#6582,.T.);+#6582 = SURFACE_CURVE('',#6583,(#6587,#6594),.PCURVE_S1.);+#6583 = LINE('',#6584,#6585);+#6584 = CARTESIAN_POINT('',(3.5,4.5,1.9));+#6585 = VECTOR('',#6586,1.);+#6586 = DIRECTION('',(0.,0.,-1.));+#6587 = PCURVE('',#168,#6588);+#6588 = DEFINITIONAL_REPRESENTATION('',(#6589),#6593);+#6589 = LINE('',#6590,#6591);+#6590 = CARTESIAN_POINT('',(0.,1.9));+#6591 = VECTOR('',#6592,1.);+#6592 = DIRECTION('',(0.,-1.));+#6593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6594 = PCURVE('',#194,#6595);+#6595 = DEFINITIONAL_REPRESENTATION('',(#6596),#6600);+#6596 = LINE('',#6597,#6598);+#6597 = CARTESIAN_POINT('',(4.5,1.9));+#6598 = VECTOR('',#6599,1.);+#6599 = DIRECTION('',(0.,-1.));+#6600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6601 = ORIENTED_EDGE('',*,*,#152,.F.);+#6602 = ORIENTED_EDGE('',*,*,#4583,.T.);+#6603 = ORIENTED_EDGE('',*,*,#2265,.T.);+#6604 = ORIENTED_EDGE('',*,*,#6605,.T.);+#6605 = EDGE_CURVE('',#2238,#6606,#6608,.T.);+#6606 = VERTEX_POINT('',#6607);+#6607 = CARTESIAN_POINT('',(1.15946203942,4.5,9.314404469578E-02));+#6608 = SURFACE_CURVE('',#6609,(#6613,#6620),.PCURVE_S1.);+#6609 = LINE('',#6610,#6611);+#6610 = CARTESIAN_POINT('',(1.15946203942,4.5,0.));+#6611 = VECTOR('',#6612,1.);+#6612 = DIRECTION('',(0.,0.,1.));+#6613 = PCURVE('',#168,#6614);+#6614 = DEFINITIONAL_REPRESENTATION('',(#6615),#6619);+#6615 = LINE('',#6616,#6617);+#6616 = CARTESIAN_POINT('',(2.34053796058,0.));+#6617 = VECTOR('',#6618,1.);+#6618 = DIRECTION('',(0.,1.));+#6619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6620 = PCURVE('',#2253,#6621);+#6621 = DEFINITIONAL_REPRESENTATION('',(#6622),#6626);+#6622 = LINE('',#6623,#6624);+#6623 = CARTESIAN_POINT('',(6.855955304216E-03,1.4307338504E-02));+#6624 = VECTOR('',#6625,1.);+#6625 = DIRECTION('',(1.,0.));+#6626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6627 = ORIENTED_EDGE('',*,*,#6628,.T.);+#6628 = EDGE_CURVE('',#6606,#6629,#6631,.T.);+#6629 = VERTEX_POINT('',#6630);+#6630 = CARTESIAN_POINT('',(1.209258678289,4.5,9.314404469578E-02));+#6631 = SURFACE_CURVE('',#6632,(#6636,#6643),.PCURVE_S1.);+#6632 = LINE('',#6633,#6634);+#6633 = CARTESIAN_POINT('',(1.15946203942,4.5,9.314404469578E-02));+#6634 = VECTOR('',#6635,1.);+#6635 = DIRECTION('',(1.,0.,0.));+#6636 = PCURVE('',#168,#6637);+#6637 = DEFINITIONAL_REPRESENTATION('',(#6638),#6642);+#6638 = LINE('',#6639,#6640);+#6639 = CARTESIAN_POINT('',(2.34053796058,9.314404469578E-02));+#6640 = VECTOR('',#6641,1.);+#6641 = DIRECTION('',(-1.,0.));+#6642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6643 = PCURVE('',#6644,#6649);+#6644 = PLANE('',#6645);+#6645 = AXIS2_PLACEMENT_3D('',#6646,#6647,#6648);+#6646 = CARTESIAN_POINT('',(1.249462039421,4.215183972023,+    9.314404469578E-02));+#6647 = DIRECTION('',(0.,0.,1.));+#6648 = DIRECTION('',(1.,0.,-0.));+#6649 = DEFINITIONAL_REPRESENTATION('',(#6650),#6654);+#6650 = LINE('',#6651,#6652);+#6651 = CARTESIAN_POINT('',(-9.0000000001E-02,0.284816027977));+#6652 = VECTOR('',#6653,1.);+#6653 = DIRECTION('',(1.,0.));+#6654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6655 = ORIENTED_EDGE('',*,*,#6656,.F.);+#6656 = EDGE_CURVE('',#6657,#6629,#6659,.T.);+#6657 = VERTEX_POINT('',#6658);+#6658 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#6659 = SURFACE_CURVE('',#6660,(#6664,#6671),.PCURVE_S1.);+#6660 = LINE('',#6661,#6662);+#6661 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#6662 = VECTOR('',#6663,1.);+#6663 = DIRECTION('',(0.,0.,-1.));+#6664 = PCURVE('',#168,#6665);+#6665 = DEFINITIONAL_REPRESENTATION('',(#6666),#6670);+#6666 = LINE('',#6667,#6668);+#6667 = CARTESIAN_POINT('',(2.290741321711,0.193144044696));+#6668 = VECTOR('',#6669,1.);+#6669 = DIRECTION('',(0.,-1.));+#6670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6671 = PCURVE('',#6672,#6677);+#6672 = PLANE('',#6673);+#6673 = AXIS2_PLACEMENT_3D('',#6674,#6675,#6676);+#6674 = CARTESIAN_POINT('',(1.209258678289,4.560983911448,0.193144044696+    ));+#6675 = DIRECTION('',(1.,0.,0.));+#6676 = DIRECTION('',(0.,-1.,0.));+#6677 = DEFINITIONAL_REPRESENTATION('',(#6678),#6682);+#6678 = LINE('',#6679,#6680);+#6679 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#6680 = VECTOR('',#6681,1.);+#6681 = DIRECTION('',(0.,1.));+#6682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6683 = ORIENTED_EDGE('',*,*,#6684,.T.);+#6684 = EDGE_CURVE('',#6657,#6685,#6687,.T.);+#6685 = VERTEX_POINT('',#6686);+#6686 = CARTESIAN_POINT('',(1.289258678287,4.5,0.193144044696));+#6687 = SURFACE_CURVE('',#6688,(#6692,#6699),.PCURVE_S1.);+#6688 = LINE('',#6689,#6690);+#6689 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#6690 = VECTOR('',#6691,1.);+#6691 = DIRECTION('',(1.,0.,0.));+#6692 = PCURVE('',#168,#6693);+#6693 = DEFINITIONAL_REPRESENTATION('',(#6694),#6698);+#6694 = LINE('',#6695,#6696);+#6695 = CARTESIAN_POINT('',(2.290741321711,0.193144044696));+#6696 = VECTOR('',#6697,1.);+#6697 = DIRECTION('',(-1.,0.));+#6698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6699 = PCURVE('',#6700,#6705);+#6700 = PLANE('',#6701);+#6701 = AXIS2_PLACEMENT_3D('',#6702,#6703,#6704);+#6702 = CARTESIAN_POINT('',(1.247111210467,4.166389785752,0.193144044696+    ));+#6703 = DIRECTION('',(0.,0.,1.));+#6704 = DIRECTION('',(1.,0.,-0.));+#6705 = DEFINITIONAL_REPRESENTATION('',(#6706),#6710);+#6706 = LINE('',#6707,#6708);+#6707 = CARTESIAN_POINT('',(-3.7852532178E-02,0.333610214248));+#6708 = VECTOR('',#6709,1.);+#6709 = DIRECTION('',(1.,0.));+#6710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6711 = ORIENTED_EDGE('',*,*,#6712,.T.);+#6712 = EDGE_CURVE('',#6685,#6713,#6715,.T.);+#6713 = VERTEX_POINT('',#6714);+#6714 = CARTESIAN_POINT('',(1.289258678287,4.5,9.314404469578E-02));+#6715 = SURFACE_CURVE('',#6716,(#6720,#6727),.PCURVE_S1.);+#6716 = LINE('',#6717,#6718);+#6717 = CARTESIAN_POINT('',(1.289258678287,4.5,0.193144044696));+#6718 = VECTOR('',#6719,1.);+#6719 = DIRECTION('',(0.,0.,-1.));+#6720 = PCURVE('',#168,#6721);+#6721 = DEFINITIONAL_REPRESENTATION('',(#6722),#6726);+#6722 = LINE('',#6723,#6724);+#6723 = CARTESIAN_POINT('',(2.210741321713,0.193144044696));+#6724 = VECTOR('',#6725,1.);+#6725 = DIRECTION('',(0.,-1.));+#6726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6727 = PCURVE('',#6728,#6733);+#6728 = PLANE('',#6729);+#6729 = AXIS2_PLACEMENT_3D('',#6730,#6731,#6732);+#6730 = CARTESIAN_POINT('',(1.289258678287,4.425983911448,0.193144044696+    ));+#6731 = DIRECTION('',(-1.,0.,0.));+#6732 = DIRECTION('',(0.,1.,0.));+#6733 = DEFINITIONAL_REPRESENTATION('',(#6734),#6738);+#6734 = LINE('',#6735,#6736);+#6735 = CARTESIAN_POINT('',(7.4016088552E-02,0.));+#6736 = VECTOR('',#6737,1.);+#6737 = DIRECTION('',(0.,1.));+#6738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6739 = ORIENTED_EDGE('',*,*,#6740,.T.);+#6740 = EDGE_CURVE('',#6713,#6741,#6743,.T.);+#6741 = VERTEX_POINT('',#6742);+#6742 = CARTESIAN_POINT('',(1.339462039421,4.5,9.314404469578E-02));+#6743 = SURFACE_CURVE('',#6744,(#6748,#6755),.PCURVE_S1.);+#6744 = LINE('',#6745,#6746);+#6745 = CARTESIAN_POINT('',(1.289258678287,4.5,9.314404469578E-02));+#6746 = VECTOR('',#6747,1.);+#6747 = DIRECTION('',(1.,0.,0.));+#6748 = PCURVE('',#168,#6749);+#6749 = DEFINITIONAL_REPRESENTATION('',(#6750),#6754);+#6750 = LINE('',#6751,#6752);+#6751 = CARTESIAN_POINT('',(2.210741321713,9.314404469578E-02));+#6752 = VECTOR('',#6753,1.);+#6753 = DIRECTION('',(-1.,0.));+#6754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6755 = PCURVE('',#6644,#6756);+#6756 = DEFINITIONAL_REPRESENTATION('',(#6757),#6761);+#6757 = LINE('',#6758,#6759);+#6758 = CARTESIAN_POINT('',(3.9796638866E-02,0.284816027977));+#6759 = VECTOR('',#6760,1.);+#6760 = DIRECTION('',(1.,0.));+#6761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6762 = ORIENTED_EDGE('',*,*,#6763,.F.);+#6763 = EDGE_CURVE('',#2042,#6741,#6764,.T.);+#6764 = SURFACE_CURVE('',#6765,(#6769,#6776),.PCURVE_S1.);+#6765 = LINE('',#6766,#6767);+#6766 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#6767 = VECTOR('',#6768,1.);+#6768 = DIRECTION('',(0.,0.,1.));+#6769 = PCURVE('',#168,#6770);+#6770 = DEFINITIONAL_REPRESENTATION('',(#6771),#6775);+#6771 = LINE('',#6772,#6773);+#6772 = CARTESIAN_POINT('',(2.160537960579,0.));+#6773 = VECTOR('',#6774,1.);+#6774 = DIRECTION('',(0.,1.));+#6775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6776 = PCURVE('',#2080,#6777);+#6777 = DEFINITIONAL_REPRESENTATION('',(#6778),#6782);+#6778 = LINE('',#6779,#6780);+#6779 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#6780 = VECTOR('',#6781,1.);+#6781 = DIRECTION('',(-1.,0.));+#6782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6783 = ORIENTED_EDGE('',*,*,#2041,.T.);+#6784 = ORIENTED_EDGE('',*,*,#6785,.T.);+#6785 = EDGE_CURVE('',#2014,#6243,#6786,.T.);+#6786 = SURFACE_CURVE('',#6787,(#6791,#6798),.PCURVE_S1.);+#6787 = LINE('',#6788,#6789);+#6788 = CARTESIAN_POINT('',(1.659462039431,4.5,0.));+#6789 = VECTOR('',#6790,1.);+#6790 = DIRECTION('',(0.,0.,1.));+#6791 = PCURVE('',#168,#6792);+#6792 = DEFINITIONAL_REPRESENTATION('',(#6793),#6797);+#6793 = LINE('',#6794,#6795);+#6794 = CARTESIAN_POINT('',(1.840537960569,0.));+#6795 = VECTOR('',#6796,1.);+#6796 = DIRECTION('',(0.,1.));+#6797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6798 = PCURVE('',#2029,#6799);+#6799 = DEFINITIONAL_REPRESENTATION('',(#6800),#6804);+#6800 = LINE('',#6801,#6802);+#6801 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#6802 = VECTOR('',#6803,1.);+#6803 = DIRECTION('',(1.,0.));+#6804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6805 = FACE_BOUND('',#6806,.F.);+#6806 = EDGE_LOOP('',(#6807,#6830,#6858,#6879));+#6807 = ORIENTED_EDGE('',*,*,#6808,.F.);+#6808 = EDGE_CURVE('',#6809,#6079,#6811,.T.);+#6809 = VERTEX_POINT('',#6810);+#6810 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6811 = SURFACE_CURVE('',#6812,(#6816,#6823),.PCURVE_S1.);+#6812 = LINE('',#6813,#6814);+#6813 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6814 = VECTOR('',#6815,1.);+#6815 = DIRECTION('',(1.,0.,0.));+#6816 = PCURVE('',#168,#6817);+#6817 = DEFINITIONAL_REPRESENTATION('',(#6818),#6822);+#6818 = LINE('',#6819,#6820);+#6819 = CARTESIAN_POINT('',(2.675537960593,9.314404469578E-02));+#6820 = VECTOR('',#6821,1.);+#6821 = DIRECTION('',(-1.,0.));+#6822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6823 = PCURVE('',#6178,#6824);+#6824 = DEFINITIONAL_REPRESENTATION('',(#6825),#6829);+#6825 = LINE('',#6826,#6827);+#6826 = CARTESIAN_POINT('',(0.122786065112,0.496066131917));+#6827 = VECTOR('',#6828,1.);+#6828 = DIRECTION('',(1.,0.));+#6829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6830 = ORIENTED_EDGE('',*,*,#6831,.T.);+#6831 = EDGE_CURVE('',#6809,#6832,#6834,.T.);+#6832 = VERTEX_POINT('',#6833);+#6833 = CARTESIAN_POINT('',(0.824462039407,4.5,0.193144044696));+#6834 = SURFACE_CURVE('',#6835,(#6839,#6846),.PCURVE_S1.);+#6835 = LINE('',#6836,#6837);+#6836 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6837 = VECTOR('',#6838,1.);+#6838 = DIRECTION('',(0.,0.,1.));+#6839 = PCURVE('',#168,#6840);+#6840 = DEFINITIONAL_REPRESENTATION('',(#6841),#6845);+#6841 = LINE('',#6842,#6843);+#6842 = CARTESIAN_POINT('',(2.675537960593,9.314404469578E-02));+#6843 = VECTOR('',#6844,1.);+#6844 = DIRECTION('',(0.,1.));+#6845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6846 = PCURVE('',#6847,#6852);+#6847 = PLANE('',#6848);+#6848 = AXIS2_PLACEMENT_3D('',#6849,#6850,#6851);+#6849 = CARTESIAN_POINT('',(0.824462039407,4.485692661496,+    9.314404469578E-02));+#6850 = DIRECTION('',(-1.,0.,0.));+#6851 = DIRECTION('',(0.,-1.,0.));+#6852 = DEFINITIONAL_REPRESENTATION('',(#6853),#6857);+#6853 = LINE('',#6854,#6855);+#6854 = CARTESIAN_POINT('',(-1.4307338504E-02,0.));+#6855 = VECTOR('',#6856,1.);+#6856 = DIRECTION('',(0.,1.));+#6857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6858 = ORIENTED_EDGE('',*,*,#6859,.T.);+#6859 = EDGE_CURVE('',#6832,#6081,#6860,.T.);+#6860 = SURFACE_CURVE('',#6861,(#6865,#6872),.PCURVE_S1.);+#6861 = LINE('',#6862,#6863);+#6862 = CARTESIAN_POINT('',(0.824462039407,4.5,0.193144044696));+#6863 = VECTOR('',#6864,1.);+#6864 = DIRECTION('',(1.,0.,0.));+#6865 = PCURVE('',#168,#6866);+#6866 = DEFINITIONAL_REPRESENTATION('',(#6867),#6871);+#6867 = LINE('',#6868,#6869);+#6868 = CARTESIAN_POINT('',(2.675537960593,0.193144044696));+#6869 = VECTOR('',#6870,1.);+#6870 = DIRECTION('',(-1.,0.));+#6871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6872 = PCURVE('',#6124,#6873);+#6873 = DEFINITIONAL_REPRESENTATION('',(#6874),#6878);+#6874 = LINE('',#6875,#6876);+#6875 = CARTESIAN_POINT('',(0.122786065112,0.496066131917));+#6876 = VECTOR('',#6877,1.);+#6877 = DIRECTION('',(1.,0.));+#6878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6879 = ORIENTED_EDGE('',*,*,#6078,.F.);+#6880 = ADVANCED_FACE('',(#6881),#6178,.T.);+#6881 = FACE_BOUND('',#6882,.F.);+#6882 = EDGE_LOOP('',(#6883,#6884,#6885,#6908));+#6883 = ORIENTED_EDGE('',*,*,#6808,.T.);+#6884 = ORIENTED_EDGE('',*,*,#6164,.F.);+#6885 = ORIENTED_EDGE('',*,*,#6886,.F.);+#6886 = EDGE_CURVE('',#6887,#6137,#6889,.T.);+#6887 = VERTEX_POINT('',#6888);+#6888 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,+    9.314404469578E-02));+#6889 = SURFACE_CURVE('',#6890,(#6894,#6901),.PCURVE_S1.);+#6890 = LINE('',#6891,#6892);+#6891 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,+    9.314404469578E-02));+#6892 = VECTOR('',#6893,1.);+#6893 = DIRECTION('',(1.,0.,0.));+#6894 = PCURVE('',#6178,#6895);+#6895 = DEFINITIONAL_REPRESENTATION('',(#6896),#6900);+#6896 = LINE('',#6897,#6898);+#6897 = CARTESIAN_POINT('',(0.122786065112,0.398341778488));+#6898 = VECTOR('',#6899,1.);+#6899 = DIRECTION('',(1.,0.));+#6900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6901 = PCURVE('',#6152,#6902);+#6902 = DEFINITIONAL_REPRESENTATION('',(#6903),#6907);+#6903 = LINE('',#6904,#6905);+#6904 = CARTESIAN_POINT('',(0.568700458035,-0.1));+#6905 = VECTOR('',#6906,1.);+#6906 = DIRECTION('',(-1.,0.));+#6907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6908 = ORIENTED_EDGE('',*,*,#6909,.F.);+#6909 = EDGE_CURVE('',#6809,#6887,#6910,.T.);+#6910 = SURFACE_CURVE('',#6911,(#6915,#6922),.PCURVE_S1.);+#6911 = LINE('',#6912,#6913);+#6912 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6913 = VECTOR('',#6914,1.);+#6914 = DIRECTION('',(0.,-1.,0.));+#6915 = PCURVE('',#6178,#6916);+#6916 = DEFINITIONAL_REPRESENTATION('',(#6917),#6921);+#6917 = LINE('',#6918,#6919);+#6918 = CARTESIAN_POINT('',(0.122786065112,0.496066131917));+#6919 = VECTOR('',#6920,1.);+#6920 = DIRECTION('',(0.,-1.));+#6921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6922 = PCURVE('',#6847,#6923);+#6923 = DEFINITIONAL_REPRESENTATION('',(#6924),#6928);+#6924 = LINE('',#6925,#6926);+#6925 = CARTESIAN_POINT('',(-1.4307338504E-02,0.));+#6926 = VECTOR('',#6927,1.);+#6927 = DIRECTION('',(1.,0.));+#6928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6929 = ADVANCED_FACE('',(#6930),#6152,.T.);+#6930 = FACE_BOUND('',#6931,.F.);+#6931 = EDGE_LOOP('',(#6932,#6933,#6934,#6957));+#6932 = ORIENTED_EDGE('',*,*,#6886,.T.);+#6933 = ORIENTED_EDGE('',*,*,#6136,.F.);+#6934 = ORIENTED_EDGE('',*,*,#6935,.T.);+#6935 = EDGE_CURVE('',#6109,#6936,#6938,.T.);+#6936 = VERTEX_POINT('',#6937);+#6937 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,0.193144044696+    ));+#6938 = SURFACE_CURVE('',#6939,(#6943,#6950),.PCURVE_S1.);+#6939 = LINE('',#6940,#6941);+#6940 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+    ));+#6941 = VECTOR('',#6942,1.);+#6942 = DIRECTION('',(-1.,0.,0.));+#6943 = PCURVE('',#6152,#6944);+#6944 = DEFINITIONAL_REPRESENTATION('',(#6945),#6949);+#6945 = LINE('',#6946,#6947);+#6946 = CARTESIAN_POINT('',(0.468700458015,0.));+#6947 = VECTOR('',#6948,1.);+#6948 = DIRECTION('',(1.,0.));+#6949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6950 = PCURVE('',#6124,#6951);+#6951 = DEFINITIONAL_REPRESENTATION('',(#6952),#6956);+#6952 = LINE('',#6953,#6954);+#6953 = CARTESIAN_POINT('',(0.222786065132,0.398341778488));+#6954 = VECTOR('',#6955,1.);+#6955 = DIRECTION('',(-1.,0.));+#6956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6957 = ORIENTED_EDGE('',*,*,#6958,.F.);+#6958 = EDGE_CURVE('',#6887,#6936,#6959,.T.);+#6959 = SURFACE_CURVE('',#6960,(#6964,#6971),.PCURVE_S1.);+#6960 = LINE('',#6961,#6962);+#6961 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,+    9.314404469578E-02));+#6962 = VECTOR('',#6963,1.);+#6963 = DIRECTION('',(0.,0.,1.));+#6964 = PCURVE('',#6152,#6965);+#6965 = DEFINITIONAL_REPRESENTATION('',(#6966),#6970);+#6966 = LINE('',#6967,#6968);+#6967 = CARTESIAN_POINT('',(0.568700458035,-0.1));+#6968 = VECTOR('',#6969,1.);+#6969 = DIRECTION('',(0.,1.));+#6970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6971 = PCURVE('',#6847,#6972);+#6972 = DEFINITIONAL_REPRESENTATION('',(#6973),#6977);+#6973 = LINE('',#6974,#6975);+#6974 = CARTESIAN_POINT('',(8.3417014925E-02,0.));+#6975 = VECTOR('',#6976,1.);+#6976 = DIRECTION('',(0.,1.));+#6977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6978 = ADVANCED_FACE('',(#6979),#4498,.F.);+#6979 = FACE_BOUND('',#6980,.F.);+#6980 = EDGE_LOOP('',(#6981,#6982,#7005,#7033));+#6981 = ORIENTED_EDGE('',*,*,#4482,.T.);+#6982 = ORIENTED_EDGE('',*,*,#6983,.T.);+#6983 = EDGE_CURVE('',#4455,#6984,#6986,.T.);+#6984 = VERTEX_POINT('',#6985);+#6985 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+    0.193144044696));+#6986 = SURFACE_CURVE('',#6987,(#6991,#6998),.PCURVE_S1.);+#6987 = LINE('',#6988,#6989);+#6988 = CARTESIAN_POINT('',(0.,4.095983918047,0.193144044696));+#6989 = VECTOR('',#6990,1.);+#6990 = DIRECTION('',(1.,-1.95991083304E-14,0.));+#6991 = PCURVE('',#4498,#6992);+#6992 = DEFINITIONAL_REPRESENTATION('',(#6993),#6997);+#6993 = LINE('',#6994,#6995);+#6994 = CARTESIAN_POINT('',(-0.701675974295,9.2050049964E-02));+#6995 = VECTOR('',#6996,1.);+#6996 = DIRECTION('',(1.,-1.95991083304E-14));+#6997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6998 = PCURVE('',#4470,#6999);+#6999 = DEFINITIONAL_REPRESENTATION('',(#7000),#7004);+#7000 = LINE('',#7001,#7002);+#7001 = CARTESIAN_POINT('',(7.574131511552E-02,0.));+#7002 = VECTOR('',#7003,1.);+#7003 = DIRECTION('',(1.,0.));+#7004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7005 = ORIENTED_EDGE('',*,*,#7006,.T.);+#7006 = EDGE_CURVE('',#6984,#7007,#7009,.T.);+#7007 = VERTEX_POINT('',#7008);+#7008 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+    0.193144044696));+#7009 = SURFACE_CURVE('',#7010,(#7014,#7021),.PCURVE_S1.);+#7010 = LINE('',#7011,#7012);+#7011 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+    0.193144044696));+#7012 = VECTOR('',#7013,1.);+#7013 = DIRECTION('',(0.,1.,0.));+#7014 = PCURVE('',#4498,#7015);+#7015 = DEFINITIONAL_REPRESENTATION('',(#7016),#7020);+#7016 = LINE('',#7017,#7018);+#7017 = CARTESIAN_POINT('',(-0.656358687165,9.2050049964E-02));+#7018 = VECTOR('',#7019,1.);+#7019 = DIRECTION('',(0.,1.));+#7020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7021 = PCURVE('',#7022,#7027);+#7022 = PLANE('',#7023);+#7023 = AXIS2_PLACEMENT_3D('',#7024,#7025,#7026);+#7024 = CARTESIAN_POINT('',(4.531728712997E-02,4.402275646571,+    0.193144044696));+#7025 = DIRECTION('',(-1.,0.,0.));+#7026 = DIRECTION('',(0.,-1.,0.));+#7027 = DEFINITIONAL_REPRESENTATION('',(#7028),#7032);+#7028 = LINE('',#7029,#7030);+#7029 = CARTESIAN_POINT('',(0.306291728524,0.));+#7030 = VECTOR('',#7031,1.);+#7031 = DIRECTION('',(-1.,0.));+#7032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7033 = ORIENTED_EDGE('',*,*,#7034,.T.);+#7034 = EDGE_CURVE('',#7007,#4483,#7035,.T.);+#7035 = SURFACE_CURVE('',#7036,(#7040,#7047),.PCURVE_S1.);+#7036 = LINE('',#7037,#7038);+#7037 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+    0.193144044696));+#7038 = VECTOR('',#7039,1.);+#7039 = DIRECTION('',(-1.,0.,0.));+#7040 = PCURVE('',#4498,#7041);+#7041 = DEFINITIONAL_REPRESENTATION('',(#7042),#7046);+#7042 = LINE('',#7043,#7044);+#7043 = CARTESIAN_POINT('',(-0.656358687165,0.172050049962));+#7044 = VECTOR('',#7045,1.);+#7045 = DIRECTION('',(-1.,0.));+#7046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7047 = PCURVE('',#4526,#7048);+#7048 = DEFINITIONAL_REPRESENTATION('',(#7049),#7053);+#7049 = LINE('',#7050,#7051);+#7050 = CARTESIAN_POINT('',(1.394139776383E-02,0.));+#7051 = VECTOR('',#7052,1.);+#7052 = DIRECTION('',(1.,0.));+#7053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7054 = ADVANCED_FACE('',(#7055),#6124,.F.);+#7055 = FACE_BOUND('',#7056,.F.);+#7056 = EDGE_LOOP('',(#7057,#7058,#7079,#7080));+#7057 = ORIENTED_EDGE('',*,*,#6859,.F.);+#7058 = ORIENTED_EDGE('',*,*,#7059,.F.);+#7059 = EDGE_CURVE('',#6936,#6832,#7060,.T.);+#7060 = SURFACE_CURVE('',#7061,(#7065,#7072),.PCURVE_S1.);+#7061 = LINE('',#7062,#7063);+#7062 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,0.193144044696+    ));+#7063 = VECTOR('',#7064,1.);+#7064 = DIRECTION('',(0.,1.,0.));+#7065 = PCURVE('',#6124,#7066);+#7066 = DEFINITIONAL_REPRESENTATION('',(#7067),#7071);+#7067 = LINE('',#7068,#7069);+#7068 = CARTESIAN_POINT('',(0.122786065112,0.398341778488));+#7069 = VECTOR('',#7070,1.);+#7070 = DIRECTION('',(0.,1.));+#7071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7072 = PCURVE('',#6847,#7073);+#7073 = DEFINITIONAL_REPRESENTATION('',(#7074),#7078);+#7074 = LINE('',#7075,#7076);+#7075 = CARTESIAN_POINT('',(8.3417014925E-02,0.1));+#7076 = VECTOR('',#7077,1.);+#7077 = DIRECTION('',(-1.,0.));+#7078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7079 = ORIENTED_EDGE('',*,*,#6935,.F.);+#7080 = ORIENTED_EDGE('',*,*,#6108,.T.);+#7081 = ADVANCED_FACE('',(#7082),#4470,.T.);+#7082 = FACE_BOUND('',#7083,.F.);+#7083 = EDGE_LOOP('',(#7084,#7085,#7108,#7129));+#7084 = ORIENTED_EDGE('',*,*,#4454,.T.);+#7085 = ORIENTED_EDGE('',*,*,#7086,.F.);+#7086 = EDGE_CURVE('',#7087,#4427,#7089,.T.);+#7087 = VERTEX_POINT('',#7088);+#7088 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+    9.314404469578E-02));+#7089 = SURFACE_CURVE('',#7090,(#7094,#7101),.PCURVE_S1.);+#7090 = LINE('',#7091,#7092);+#7091 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+    9.314404469578E-02));+#7092 = VECTOR('',#7093,1.);+#7093 = DIRECTION('',(-1.,0.,0.));+#7094 = PCURVE('',#4470,#7095);+#7095 = DEFINITIONAL_REPRESENTATION('',(#7096),#7100);+#7096 = LINE('',#7097,#7098);+#7097 = CARTESIAN_POINT('',(0.121058602245,0.1));+#7098 = VECTOR('',#7099,1.);+#7099 = DIRECTION('',(-1.,0.));+#7100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7101 = PCURVE('',#4442,#7102);+#7102 = DEFINITIONAL_REPRESENTATION('',(#7103),#7107);+#7103 = LINE('',#7104,#7105);+#7104 = CARTESIAN_POINT('',(-0.411828960604,-0.105773136061));+#7105 = VECTOR('',#7106,1.);+#7106 = DIRECTION('',(-1.,0.));+#7107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7108 = ORIENTED_EDGE('',*,*,#7109,.F.);+#7109 = EDGE_CURVE('',#6984,#7087,#7110,.T.);+#7110 = SURFACE_CURVE('',#7111,(#7115,#7122),.PCURVE_S1.);+#7111 = LINE('',#7112,#7113);+#7112 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+    0.193144044696));+#7113 = VECTOR('',#7114,1.);+#7114 = DIRECTION('',(0.,0.,-1.));+#7115 = PCURVE('',#4470,#7116);+#7116 = DEFINITIONAL_REPRESENTATION('',(#7117),#7121);+#7117 = LINE('',#7118,#7119);+#7118 = CARTESIAN_POINT('',(0.121058602245,0.));+#7119 = VECTOR('',#7120,1.);+#7120 = DIRECTION('',(0.,1.));+#7121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7122 = PCURVE('',#7022,#7123);+#7123 = DEFINITIONAL_REPRESENTATION('',(#7124),#7128);+#7124 = LINE('',#7125,#7126);+#7125 = CARTESIAN_POINT('',(0.306291728524,0.));+#7126 = VECTOR('',#7127,1.);+#7127 = DIRECTION('',(0.,-1.));+#7128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7129 = ORIENTED_EDGE('',*,*,#6983,.F.);+#7130 = ADVANCED_FACE('',(#7131),#4442,.F.);+#7131 = FACE_BOUND('',#7132,.F.);+#7132 = EDGE_LOOP('',(#7133,#7134,#7135,#7136,#7137,#7138,#7161,#7184,+    #7207,#7228,#7229,#7252,#7273));+#7133 = ORIENTED_EDGE('',*,*,#4426,.F.);+#7134 = ORIENTED_EDGE('',*,*,#5956,.F.);+#7135 = ORIENTED_EDGE('',*,*,#6004,.T.);+#7136 = ORIENTED_EDGE('',*,*,#6053,.F.);+#7137 = ORIENTED_EDGE('',*,*,#6217,.T.);+#7138 = ORIENTED_EDGE('',*,*,#7139,.T.);+#7139 = EDGE_CURVE('',#6195,#7140,#7142,.T.);+#7140 = VERTEX_POINT('',#7141);+#7141 = CARTESIAN_POINT('',(0.199462039425,4.385692661494,+    9.314404469578E-02));+#7142 = SURFACE_CURVE('',#7143,(#7147,#7154),.PCURVE_S1.);+#7143 = LINE('',#7144,#7145);+#7144 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,+    9.314404469578E-02));+#7145 = VECTOR('',#7146,1.);+#7146 = DIRECTION('',(-1.,0.,0.));+#7147 = PCURVE('',#4442,#7148);+#7148 = DEFINITIONAL_REPRESENTATION('',(#7149),#7153);+#7149 = LINE('',#7150,#7151);+#7150 = CARTESIAN_POINT('',(0.467315791693,0.183935607386));+#7151 = VECTOR('',#7152,1.);+#7152 = DIRECTION('',(-1.,0.));+#7153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7154 = PCURVE('',#2411,#7155);+#7155 = DEFINITIONAL_REPRESENTATION('',(#7156),#7160);+#7156 = LINE('',#7157,#7158);+#7157 = CARTESIAN_POINT('',(-0.10000000002,0.));+#7158 = VECTOR('',#7159,1.);+#7159 = DIRECTION('',(1.,0.));+#7160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7161 = ORIENTED_EDGE('',*,*,#7162,.F.);+#7162 = EDGE_CURVE('',#7163,#7140,#7165,.T.);+#7163 = VERTEX_POINT('',#7164);+#7164 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,+    9.314404469578E-02));+#7165 = SURFACE_CURVE('',#7166,(#7170,#7177),.PCURVE_S1.);+#7166 = LINE('',#7167,#7168);+#7167 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,+    9.314404469578E-02));+#7168 = VECTOR('',#7169,1.);+#7169 = DIRECTION('',(0.,1.,0.));+#7170 = PCURVE('',#4442,#7171);+#7171 = DEFINITIONAL_REPRESENTATION('',(#7172),#7176);+#7172 = LINE('',#7173,#7174);+#7173 = CARTESIAN_POINT('',(-0.257684208309,5.8935607388E-02));+#7174 = VECTOR('',#7175,1.);+#7175 = DIRECTION('',(0.,1.));+#7176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7177 = PCURVE('',#2383,#7178);+#7178 = DEFINITIONAL_REPRESENTATION('',(#7179),#7183);+#7179 = LINE('',#7180,#7181);+#7180 = CARTESIAN_POINT('',(1.000088900582E-12,0.));+#7181 = VECTOR('',#7182,1.);+#7182 = DIRECTION('',(1.,0.));+#7183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7184 = ORIENTED_EDGE('',*,*,#7185,.T.);+#7185 = EDGE_CURVE('',#7163,#7186,#7188,.T.);+#7186 = VERTEX_POINT('',#7187);+#7187 = CARTESIAN_POINT('',(7.446203941993E-02,4.260692661496,+    9.314404469578E-02));+#7188 = SURFACE_CURVE('',#7189,(#7193,#7200),.PCURVE_S1.);+#7189 = LINE('',#7190,#7191);+#7190 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,+    9.314404469578E-02));+#7191 = VECTOR('',#7192,1.);+#7192 = DIRECTION('',(-1.,0.,0.));+#7193 = PCURVE('',#4442,#7194);+#7194 = DEFINITIONAL_REPRESENTATION('',(#7195),#7199);+#7195 = LINE('',#7196,#7197);+#7196 = CARTESIAN_POINT('',(-0.257684208309,5.8935607388E-02));+#7197 = VECTOR('',#7198,1.);+#7198 = DIRECTION('',(-1.,0.));+#7199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7200 = PCURVE('',#2355,#7201);+#7201 = DEFINITIONAL_REPRESENTATION('',(#7202),#7206);+#7202 = LINE('',#7203,#7204);+#7203 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#7204 = VECTOR('',#7205,1.);+#7205 = DIRECTION('',(1.,0.));+#7206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7207 = ORIENTED_EDGE('',*,*,#7208,.F.);+#7208 = EDGE_CURVE('',#4539,#7186,#7209,.T.);+#7209 = SURFACE_CURVE('',#7210,(#7214,#7221),.PCURVE_S1.);+#7210 = LINE('',#7211,#7212);+#7211 = CARTESIAN_POINT('',(0.,4.225943709765,9.314404469578E-02));+#7212 = VECTOR('',#7213,1.);+#7213 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#7214 = PCURVE('',#4442,#7215);+#7215 = DEFINITIONAL_REPRESENTATION('',(#7216),#7220);+#7216 = LINE('',#7217,#7218);+#7217 = CARTESIAN_POINT('',(-0.457146247734,2.4186655657E-02));+#7218 = VECTOR('',#7219,1.);+#7219 = DIRECTION('',(0.906183139987,0.422885465348));+#7220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7221 = PCURVE('',#2327,#7222);+#7222 = DEFINITIONAL_REPRESENTATION('',(#7223),#7227);+#7223 = LINE('',#7224,#7225);+#7224 = CARTESIAN_POINT('',(5.936554721189E-04,0.));+#7225 = VECTOR('',#7226,1.);+#7226 = DIRECTION('',(1.,0.));+#7227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7228 = ORIENTED_EDGE('',*,*,#4538,.F.);+#7229 = ORIENTED_EDGE('',*,*,#7230,.F.);+#7230 = EDGE_CURVE('',#7231,#4511,#7233,.T.);+#7231 = VERTEX_POINT('',#7232);+#7232 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+    9.314404469578E-02));+#7233 = SURFACE_CURVE('',#7234,(#7238,#7245),.PCURVE_S1.);+#7234 = LINE('',#7235,#7236);+#7235 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+    9.314404469578E-02));+#7236 = VECTOR('',#7237,1.);+#7237 = DIRECTION('',(-1.,0.,0.));+#7238 = PCURVE('',#4442,#7239);+#7239 = DEFINITIONAL_REPRESENTATION('',(#7240),#7244);+#7240 = LINE('',#7241,#7242);+#7241 = CARTESIAN_POINT('',(-0.411828960604,-2.5773136063E-02));+#7242 = VECTOR('',#7243,1.);+#7243 = DIRECTION('',(-1.,0.));+#7244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7245 = PCURVE('',#4526,#7246);+#7246 = DEFINITIONAL_REPRESENTATION('',(#7247),#7251);+#7247 = LINE('',#7248,#7249);+#7248 = CARTESIAN_POINT('',(1.394139776383E-02,0.1));+#7249 = VECTOR('',#7250,1.);+#7250 = DIRECTION('',(1.,0.));+#7251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7252 = ORIENTED_EDGE('',*,*,#7253,.T.);+#7253 = EDGE_CURVE('',#7231,#7087,#7254,.T.);+#7254 = SURFACE_CURVE('',#7255,(#7259,#7266),.PCURVE_S1.);+#7255 = LINE('',#7256,#7257);+#7256 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+    9.314404469578E-02));+#7257 = VECTOR('',#7258,1.);+#7258 = DIRECTION('',(0.,-1.,0.));+#7259 = PCURVE('',#4442,#7260);+#7260 = DEFINITIONAL_REPRESENTATION('',(#7261),#7265);+#7261 = LINE('',#7262,#7263);+#7262 = CARTESIAN_POINT('',(-0.411828960604,-2.5773136063E-02));+#7263 = VECTOR('',#7264,1.);+#7264 = DIRECTION('',(0.,-1.));+#7265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7266 = PCURVE('',#7022,#7267);+#7267 = DEFINITIONAL_REPRESENTATION('',(#7268),#7272);+#7268 = LINE('',#7269,#7270);+#7269 = CARTESIAN_POINT('',(0.226291728526,-0.1));+#7270 = VECTOR('',#7271,1.);+#7271 = DIRECTION('',(1.,0.));+#7272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7273 = ORIENTED_EDGE('',*,*,#7086,.T.);+#7274 = ADVANCED_FACE('',(#7275),#2411,.F.);+#7275 = FACE_BOUND('',#7276,.F.);+#7276 = EDGE_LOOP('',(#7277,#7278,#7299,#7300));+#7277 = ORIENTED_EDGE('',*,*,#2395,.T.);+#7278 = ORIENTED_EDGE('',*,*,#7279,.T.);+#7279 = EDGE_CURVE('',#2368,#7140,#7280,.T.);+#7280 = SURFACE_CURVE('',#7281,(#7285,#7292),.PCURVE_S1.);+#7281 = LINE('',#7282,#7283);+#7282 = CARTESIAN_POINT('',(0.199462039425,4.385692661494,0.));+#7283 = VECTOR('',#7284,1.);+#7284 = DIRECTION('',(0.,0.,1.));+#7285 = PCURVE('',#2411,#7286);+#7286 = DEFINITIONAL_REPRESENTATION('',(#7287),#7291);+#7287 = LINE('',#7288,#7289);+#7288 = CARTESIAN_POINT('',(0.624999999982,-9.314404469578E-02));+#7289 = VECTOR('',#7290,1.);+#7290 = DIRECTION('',(0.,1.));+#7291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7292 = PCURVE('',#2383,#7293);+#7293 = DEFINITIONAL_REPRESENTATION('',(#7294),#7298);+#7294 = LINE('',#7295,#7296);+#7295 = CARTESIAN_POINT('',(0.124999999999,9.314404469578E-02));+#7296 = VECTOR('',#7297,1.);+#7297 = DIRECTION('',(0.,-1.));+#7298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7299 = ORIENTED_EDGE('',*,*,#7139,.F.);+#7300 = ORIENTED_EDGE('',*,*,#6194,.F.);+#7301 = ADVANCED_FACE('',(#7302),#2383,.F.);+#7302 = FACE_BOUND('',#7303,.F.);+#7303 = EDGE_LOOP('',(#7304,#7305,#7326,#7327));+#7304 = ORIENTED_EDGE('',*,*,#2367,.F.);+#7305 = ORIENTED_EDGE('',*,*,#7306,.T.);+#7306 = EDGE_CURVE('',#2340,#7163,#7307,.T.);+#7307 = SURFACE_CURVE('',#7308,(#7312,#7319),.PCURVE_S1.);+#7308 = LINE('',#7309,#7310);+#7309 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#7310 = VECTOR('',#7311,1.);+#7311 = DIRECTION('',(0.,0.,1.));+#7312 = PCURVE('',#2383,#7313);+#7313 = DEFINITIONAL_REPRESENTATION('',(#7314),#7318);+#7314 = LINE('',#7315,#7316);+#7315 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#7316 = VECTOR('',#7317,1.);+#7317 = DIRECTION('',(0.,-1.));+#7318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7319 = PCURVE('',#2355,#7320);+#7320 = DEFINITIONAL_REPRESENTATION('',(#7321),#7325);+#7321 = LINE('',#7322,#7323);+#7322 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#7323 = VECTOR('',#7324,1.);+#7324 = DIRECTION('',(0.,1.));+#7325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7326 = ORIENTED_EDGE('',*,*,#7162,.T.);+#7327 = ORIENTED_EDGE('',*,*,#7279,.F.);+#7328 = ADVANCED_FACE('',(#7329),#2355,.F.);+#7329 = FACE_BOUND('',#7330,.F.);+#7330 = EDGE_LOOP('',(#7331,#7332,#7353,#7354));+#7331 = ORIENTED_EDGE('',*,*,#2339,.T.);+#7332 = ORIENTED_EDGE('',*,*,#7333,.T.);+#7333 = EDGE_CURVE('',#2312,#7186,#7334,.T.);+#7334 = SURFACE_CURVE('',#7335,(#7339,#7346),.PCURVE_S1.);+#7335 = LINE('',#7336,#7337);+#7336 = CARTESIAN_POINT('',(7.446203941993E-02,4.260692661496,0.));+#7337 = VECTOR('',#7338,1.);+#7338 = DIRECTION('',(0.,0.,1.));+#7339 = PCURVE('',#2355,#7340);+#7340 = DEFINITIONAL_REPRESENTATION('',(#7341),#7345);+#7341 = LINE('',#7342,#7343);+#7342 = CARTESIAN_POINT('',(7.500000659707E-02,-9.314404469578E-02));+#7343 = VECTOR('',#7344,1.);+#7344 = DIRECTION('',(0.,1.));+#7345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7346 = PCURVE('',#2327,#7347);+#7347 = DEFINITIONAL_REPRESENTATION('',(#7348),#7352);+#7348 = LINE('',#7349,#7350);+#7349 = CARTESIAN_POINT('',(8.276472678665E-02,9.314404469578E-02));+#7350 = VECTOR('',#7351,1.);+#7351 = DIRECTION('',(0.,-1.));+#7352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7353 = ORIENTED_EDGE('',*,*,#7185,.F.);+#7354 = ORIENTED_EDGE('',*,*,#7306,.F.);+#7355 = ADVANCED_FACE('',(#7356),#2327,.F.);+#7356 = FACE_BOUND('',#7357,.F.);+#7357 = EDGE_LOOP('',(#7358,#7359,#7360,#7361));+#7358 = ORIENTED_EDGE('',*,*,#4561,.T.);+#7359 = ORIENTED_EDGE('',*,*,#7208,.T.);+#7360 = ORIENTED_EDGE('',*,*,#7333,.F.);+#7361 = ORIENTED_EDGE('',*,*,#2311,.F.);+#7362 = ADVANCED_FACE('',(#7363),#4526,.T.);+#7363 = FACE_BOUND('',#7364,.F.);+#7364 = EDGE_LOOP('',(#7365,#7366,#7367,#7388));+#7365 = ORIENTED_EDGE('',*,*,#4510,.F.);+#7366 = ORIENTED_EDGE('',*,*,#7034,.F.);+#7367 = ORIENTED_EDGE('',*,*,#7368,.T.);+#7368 = EDGE_CURVE('',#7007,#7231,#7369,.T.);+#7369 = SURFACE_CURVE('',#7370,(#7374,#7381),.PCURVE_S1.);+#7370 = LINE('',#7371,#7372);+#7371 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+    0.193144044696));+#7372 = VECTOR('',#7373,1.);+#7373 = DIRECTION('',(0.,0.,-1.));+#7374 = PCURVE('',#4526,#7375);+#7375 = DEFINITIONAL_REPRESENTATION('',(#7376),#7380);+#7376 = LINE('',#7377,#7378);+#7377 = CARTESIAN_POINT('',(1.394139776383E-02,0.));+#7378 = VECTOR('',#7379,1.);+#7379 = DIRECTION('',(0.,1.));+#7380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7381 = PCURVE('',#7022,#7382);+#7382 = DEFINITIONAL_REPRESENTATION('',(#7383),#7387);+#7383 = LINE('',#7384,#7385);+#7384 = CARTESIAN_POINT('',(0.226291728526,0.));+#7385 = VECTOR('',#7386,1.);+#7386 = DIRECTION('',(0.,-1.));+#7387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7388 = ORIENTED_EDGE('',*,*,#7230,.T.);+#7389 = ADVANCED_FACE('',(#7390),#7022,.T.);+#7390 = FACE_BOUND('',#7391,.F.);+#7391 = EDGE_LOOP('',(#7392,#7393,#7394,#7395));+#7392 = ORIENTED_EDGE('',*,*,#7109,.T.);+#7393 = ORIENTED_EDGE('',*,*,#7253,.F.);+#7394 = ORIENTED_EDGE('',*,*,#7368,.F.);+#7395 = ORIENTED_EDGE('',*,*,#7006,.F.);+#7396 = ADVANCED_FACE('',(#7397),#6847,.F.);+#7397 = FACE_BOUND('',#7398,.F.);+#7398 = EDGE_LOOP('',(#7399,#7400,#7401,#7402));+#7399 = ORIENTED_EDGE('',*,*,#6831,.F.);+#7400 = ORIENTED_EDGE('',*,*,#6909,.T.);+#7401 = ORIENTED_EDGE('',*,*,#6958,.T.);+#7402 = ORIENTED_EDGE('',*,*,#7059,.T.);+#7403 = ADVANCED_FACE('',(#7404),#6260,.F.);+#7404 = FACE_BOUND('',#7405,.F.);+#7405 = EDGE_LOOP('',(#7406,#7407,#7430,#7453,#7476,#7504,#7527,#7550,+    #7571,#7572,#7595,#7623));+#7406 = ORIENTED_EDGE('',*,*,#6242,.F.);+#7407 = ORIENTED_EDGE('',*,*,#7408,.F.);+#7408 = EDGE_CURVE('',#7409,#6243,#7411,.T.);+#7409 = VERTEX_POINT('',#7410);+#7410 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,+    9.314404469578E-02));+#7411 = SURFACE_CURVE('',#7412,(#7416,#7423),.PCURVE_S1.);+#7412 = LINE('',#7413,#7414);+#7413 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,+    9.314404469578E-02));+#7414 = VECTOR('',#7415,1.);+#7415 = DIRECTION('',(0.,1.,0.));+#7416 = PCURVE('',#6260,#7417);+#7417 = DEFINITIONAL_REPRESENTATION('',(#7418),#7422);+#7418 = LINE('',#7419,#7420);+#7419 = CARTESIAN_POINT('',(-8.9999999982E-02,0.638357737));+#7420 = VECTOR('',#7421,1.);+#7421 = DIRECTION('',(0.,1.));+#7422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7423 = PCURVE('',#2029,#7424);+#7424 = DEFINITIONAL_REPRESENTATION('',(#7425),#7429);+#7425 = LINE('',#7426,#7427);+#7426 = CARTESIAN_POINT('',(9.999999999999E-02,3.99946742391E-12));+#7427 = VECTOR('',#7428,1.);+#7428 = DIRECTION('',(0.,1.));+#7429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7430 = ORIENTED_EDGE('',*,*,#7431,.F.);+#7431 = EDGE_CURVE('',#7432,#7409,#7434,.T.);+#7432 = VERTEX_POINT('',#7433);+#7433 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+    9.314404469578E-02));+#7434 = SURFACE_CURVE('',#7435,(#7439,#7446),.PCURVE_S1.);+#7435 = LINE('',#7436,#7437);+#7436 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+    9.314404469578E-02));+#7437 = VECTOR('',#7438,1.);+#7438 = DIRECTION('',(0.624695047618,0.780868809392,0.));+#7439 = PCURVE('',#6260,#7440);+#7440 = DEFINITIONAL_REPRESENTATION('',(#7441),#7445);+#7441 = LINE('',#7442,#7443);+#7442 = CARTESIAN_POINT('',(-0.149999999994,0.563357736997));+#7443 = VECTOR('',#7444,1.);+#7444 = DIRECTION('',(0.624695047618,0.780868809392));+#7445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7446 = PCURVE('',#2001,#7447);+#7447 = DEFINITIONAL_REPRESENTATION('',(#7448),#7452);+#7448 = LINE('',#7449,#7450);+#7449 = CARTESIAN_POINT('',(0.,0.));+#7450 = VECTOR('',#7451,1.);+#7451 = DIRECTION('',(1.,0.));+#7452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7453 = ORIENTED_EDGE('',*,*,#7454,.T.);+#7454 = EDGE_CURVE('',#7432,#7455,#7457,.T.);+#7455 = VERTEX_POINT('',#7456);+#7456 = CARTESIAN_POINT('',(1.599462039419,3.285692661496,+    9.314404469578E-02));+#7457 = SURFACE_CURVE('',#7458,(#7462,#7469),.PCURVE_S1.);+#7458 = LINE('',#7459,#7460);+#7459 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+    9.314404469578E-02));+#7460 = VECTOR('',#7461,1.);+#7461 = DIRECTION('',(0.,-1.,0.));+#7462 = PCURVE('',#6260,#7463);+#7463 = DEFINITIONAL_REPRESENTATION('',(#7464),#7468);+#7464 = LINE('',#7465,#7466);+#7465 = CARTESIAN_POINT('',(-0.149999999994,0.563357736997));+#7466 = VECTOR('',#7467,1.);+#7467 = DIRECTION('',(0.,-1.));+#7468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7469 = PCURVE('',#1973,#7470);+#7470 = DEFINITIONAL_REPRESENTATION('',(#7471),#7475);+#7471 = LINE('',#7472,#7473);+#7472 = CARTESIAN_POINT('',(1.999289622745E-12,0.));+#7473 = VECTOR('',#7474,1.);+#7474 = DIRECTION('',(1.,0.));+#7475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7476 = ORIENTED_EDGE('',*,*,#7477,.F.);+#7477 = EDGE_CURVE('',#7478,#7455,#7480,.T.);+#7478 = VERTEX_POINT('',#7479);+#7479 = CARTESIAN_POINT('',(1.899462039407,3.2856926613,+    9.314404469578E-02));+#7480 = SURFACE_CURVE('',#7481,(#7486,#7497),.PCURVE_S1.);+#7481 = CIRCLE('',#7482,0.149999999994);+#7482 = AXIS2_PLACEMENT_3D('',#7483,#7484,#7485);+#7483 = CARTESIAN_POINT('',(1.749462039413,3.285692661496,+    9.314404469578E-02));+#7484 = DIRECTION('',(0.,0.,-1.));+#7485 = DIRECTION('',(1.,-1.3086065565E-09,0.));+#7486 = PCURVE('',#6260,#7487);+#7487 = DEFINITIONAL_REPRESENTATION('',(#7488),#7496);+#7488 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7489,#7490,#7491,#7492,+#7493,#7494,#7495),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7489 = CARTESIAN_POINT('',(0.149999999994,-0.5616422632));+#7490 = CARTESIAN_POINT('',(0.149999999654,-0.821449884325));+#7491 = CARTESIAN_POINT('',(-7.500000016699E-02,-0.691546073468));+#7492 = CARTESIAN_POINT('',(-0.299999999988,-0.561642262611));+#7493 = CARTESIAN_POINT('',(-7.499999982701E-02,-0.431738452343));+#7494 = CARTESIAN_POINT('',(0.150000000334,-0.301834642075));+#7495 = CARTESIAN_POINT('',(0.149999999994,-0.5616422632));+#7496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7497 = PCURVE('',#1945,#7498);+#7498 = DEFINITIONAL_REPRESENTATION('',(#7499),#7503);+#7499 = LINE('',#7500,#7501);+#7500 = CARTESIAN_POINT('',(3.141592654898,0.));+#7501 = VECTOR('',#7502,1.);+#7502 = DIRECTION('',(1.,0.));+#7503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7504 = ORIENTED_EDGE('',*,*,#7505,.T.);+#7505 = EDGE_CURVE('',#7478,#7506,#7508,.T.);+#7506 = VERTEX_POINT('',#7507);+#7507 = CARTESIAN_POINT('',(1.899462039389,4.41069266152,+    9.314404469578E-02));+#7508 = SURFACE_CURVE('',#7509,(#7513,#7520),.PCURVE_S1.);+#7509 = LINE('',#7510,#7511);+#7510 = CARTESIAN_POINT('',(1.899462039395,3.285692661431,+    9.314404469578E-02));+#7511 = VECTOR('',#7512,1.);+#7512 = DIRECTION('',(-5.387690293475E-12,1.,0.));+#7513 = PCURVE('',#6260,#7514);+#7514 = DEFINITIONAL_REPRESENTATION('',(#7515),#7519);+#7515 = LINE('',#7516,#7517);+#7516 = CARTESIAN_POINT('',(0.149999999982,-0.561642263069));+#7517 = VECTOR('',#7518,1.);+#7518 = DIRECTION('',(-5.387690293475E-12,1.));+#7519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7520 = PCURVE('',#1912,#7521);+#7521 = DEFINITIONAL_REPRESENTATION('',(#7522),#7526);+#7522 = LINE('',#7523,#7524);+#7523 = CARTESIAN_POINT('',(-1.050000000071,0.));+#7524 = VECTOR('',#7525,1.);+#7525 = DIRECTION('',(1.,0.));+#7526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7527 = ORIENTED_EDGE('',*,*,#7528,.F.);+#7528 = EDGE_CURVE('',#7529,#7506,#7531,.T.);+#7529 = VERTEX_POINT('',#7530);+#7530 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+    9.314404469578E-02));+#7531 = SURFACE_CURVE('',#7532,(#7536,#7543),.PCURVE_S1.);+#7532 = LINE('',#7533,#7534);+#7533 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+    9.314404469578E-02));+#7534 = VECTOR('',#7535,1.);+#7535 = DIRECTION('',(0.624695047517,-0.780868809473,0.));+#7536 = PCURVE('',#6260,#7537);+#7537 = DEFINITIONAL_REPRESENTATION('',(#7538),#7542);+#7538 = LINE('',#7539,#7540);+#7539 = CARTESIAN_POINT('',(9.E-02,0.638357736997));+#7540 = VECTOR('',#7541,1.);+#7541 = DIRECTION('',(0.624695047517,-0.780868809473));+#7542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7543 = PCURVE('',#1884,#7544);+#7544 = DEFINITIONAL_REPRESENTATION('',(#7545),#7549);+#7545 = LINE('',#7546,#7547);+#7546 = CARTESIAN_POINT('',(0.,0.));+#7547 = VECTOR('',#7548,1.);+#7548 = DIRECTION('',(1.,0.));+#7549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7550 = ORIENTED_EDGE('',*,*,#7551,.T.);+#7551 = EDGE_CURVE('',#7529,#6357,#7552,.T.);+#7552 = SURFACE_CURVE('',#7553,(#7557,#7564),.PCURVE_S1.);+#7553 = LINE('',#7554,#7555);+#7554 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+    9.314404469578E-02));+#7555 = VECTOR('',#7556,1.);+#7556 = DIRECTION('',(0.,1.,0.));+#7557 = PCURVE('',#6260,#7558);+#7558 = DEFINITIONAL_REPRESENTATION('',(#7559),#7563);+#7559 = LINE('',#7560,#7561);+#7560 = CARTESIAN_POINT('',(9.E-02,0.638357736997));+#7561 = VECTOR('',#7562,1.);+#7562 = DIRECTION('',(0.,1.));+#7563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7564 = PCURVE('',#1856,#7565);+#7565 = DEFINITIONAL_REPRESENTATION('',(#7566),#7570);+#7566 = LINE('',#7567,#7568);+#7567 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#7568 = VECTOR('',#7569,1.);+#7569 = DIRECTION('',(0.,1.));+#7570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7571 = ORIENTED_EDGE('',*,*,#6356,.F.);+#7572 = ORIENTED_EDGE('',*,*,#7573,.T.);+#7573 = EDGE_CURVE('',#6329,#7574,#7576,.T.);+#7574 = VERTEX_POINT('',#7575);+#7575 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,+    9.314404469578E-02));+#7576 = SURFACE_CURVE('',#7577,(#7581,#7588),.PCURVE_S1.);+#7577 = LINE('',#7578,#7579);+#7578 = CARTESIAN_POINT('',(1.789258678298,4.5,9.314404469578E-02));+#7579 = VECTOR('',#7580,1.);+#7580 = DIRECTION('',(-1.089245117497E-14,-1.,0.));+#7581 = PCURVE('',#6260,#7582);+#7582 = DEFINITIONAL_REPRESENTATION('',(#7583),#7587);+#7583 = LINE('',#7584,#7585);+#7584 = CARTESIAN_POINT('',(3.9796638885E-02,0.6526650755));+#7585 = VECTOR('',#7586,1.);+#7586 = DIRECTION('',(-1.089245117497E-14,-1.));+#7587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7588 = PCURVE('',#6344,#7589);+#7589 = DEFINITIONAL_REPRESENTATION('',(#7590),#7594);+#7590 = LINE('',#7591,#7592);+#7591 = CARTESIAN_POINT('',(7.4016088552E-02,0.1));+#7592 = VECTOR('',#7593,1.);+#7593 = DIRECTION('',(-1.,0.));+#7594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7595 = ORIENTED_EDGE('',*,*,#7596,.T.);+#7596 = EDGE_CURVE('',#7574,#7597,#7599,.T.);+#7597 = VERTEX_POINT('',#7598);+#7598 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,+    9.314404469578E-02));+#7599 = SURFACE_CURVE('',#7600,(#7604,#7611),.PCURVE_S1.);+#7600 = LINE('',#7601,#7602);+#7601 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,+    9.314404469578E-02));+#7602 = VECTOR('',#7603,1.);+#7603 = DIRECTION('',(-1.,0.,0.));+#7604 = PCURVE('',#6260,#7605);+#7605 = DEFINITIONAL_REPRESENTATION('',(#7606),#7610);+#7606 = LINE('',#7607,#7608);+#7607 = CARTESIAN_POINT('',(3.9796638885E-02,0.591509528041));+#7608 = VECTOR('',#7609,1.);+#7609 = DIRECTION('',(-1.,0.));+#7610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7611 = PCURVE('',#7612,#7617);+#7612 = PLANE('',#7613);+#7613 = AXIS2_PLACEMENT_3D('',#7614,#7615,#7616);+#7614 = CARTESIAN_POINT('',(2.033570722679,4.438844452541,0.193144044696+    ));+#7615 = DIRECTION('',(0.,1.,0.));+#7616 = DIRECTION('',(-1.,0.,0.));+#7617 = DEFINITIONAL_REPRESENTATION('',(#7618),#7622);+#7618 = LINE('',#7619,#7620);+#7619 = CARTESIAN_POINT('',(0.244312044381,-0.1));+#7620 = VECTOR('',#7621,1.);+#7621 = DIRECTION('',(1.,0.));+#7622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7623 = ORIENTED_EDGE('',*,*,#7624,.T.);+#7624 = EDGE_CURVE('',#7597,#6245,#7625,.T.);+#7625 = SURFACE_CURVE('',#7626,(#7630,#7637),.PCURVE_S1.);+#7626 = LINE('',#7627,#7628);+#7627 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,+    9.314404469578E-02));+#7628 = VECTOR('',#7629,1.);+#7629 = DIRECTION('',(0.,1.,0.));+#7630 = PCURVE('',#6260,#7631);+#7631 = DEFINITIONAL_REPRESENTATION('',(#7632),#7636);+#7632 = LINE('',#7633,#7634);+#7633 = CARTESIAN_POINT('',(-4.0203361113E-02,0.591509528041));+#7634 = VECTOR('',#7635,1.);+#7635 = DIRECTION('',(0.,1.));+#7636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7637 = PCURVE('',#6288,#7638);+#7638 = DEFINITIONAL_REPRESENTATION('',(#7639),#7643);+#7639 = LINE('',#7640,#7641);+#7640 = CARTESIAN_POINT('',(0.122139458907,0.1));+#7641 = VECTOR('',#7642,1.);+#7642 = DIRECTION('',(-1.,0.));+#7643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7644 = ADVANCED_FACE('',(#7645),#2029,.F.);+#7645 = FACE_BOUND('',#7646,.F.);+#7646 = EDGE_LOOP('',(#7647,#7648,#7649,#7670));+#7647 = ORIENTED_EDGE('',*,*,#6785,.F.);+#7648 = ORIENTED_EDGE('',*,*,#2013,.T.);+#7649 = ORIENTED_EDGE('',*,*,#7650,.F.);+#7650 = EDGE_CURVE('',#7409,#1986,#7651,.T.);+#7651 = SURFACE_CURVE('',#7652,(#7656,#7663),.PCURVE_S1.);+#7652 = LINE('',#7653,#7654);+#7653 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,+    9.314404469578E-02));+#7654 = VECTOR('',#7655,1.);+#7655 = DIRECTION('',(0.,0.,-1.));+#7656 = PCURVE('',#2029,#7657);+#7657 = DEFINITIONAL_REPRESENTATION('',(#7658),#7662);+#7658 = LINE('',#7659,#7660);+#7659 = CARTESIAN_POINT('',(9.999999999999E-02,3.99946742391E-12));+#7660 = VECTOR('',#7661,1.);+#7661 = DIRECTION('',(-1.,0.));+#7662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7663 = PCURVE('',#2001,#7664);+#7664 = DEFINITIONAL_REPRESENTATION('',(#7665),#7669);+#7665 = LINE('',#7666,#7667);+#7666 = CARTESIAN_POINT('',(9.604686357133E-02,0.));+#7667 = VECTOR('',#7668,1.);+#7668 = DIRECTION('',(0.,1.));+#7669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7670 = ORIENTED_EDGE('',*,*,#7408,.T.);+#7671 = ADVANCED_FACE('',(#7672),#2001,.F.);+#7672 = FACE_BOUND('',#7673,.F.);+#7673 = EDGE_LOOP('',(#7674,#7675,#7696,#7697));+#7674 = ORIENTED_EDGE('',*,*,#1985,.F.);+#7675 = ORIENTED_EDGE('',*,*,#7676,.F.);+#7676 = EDGE_CURVE('',#7432,#1958,#7677,.T.);+#7677 = SURFACE_CURVE('',#7678,(#7682,#7689),.PCURVE_S1.);+#7678 = LINE('',#7679,#7680);+#7679 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+    9.314404469578E-02));+#7680 = VECTOR('',#7681,1.);+#7681 = DIRECTION('',(0.,0.,-1.));+#7682 = PCURVE('',#2001,#7683);+#7683 = DEFINITIONAL_REPRESENTATION('',(#7684),#7688);+#7684 = LINE('',#7685,#7686);+#7685 = CARTESIAN_POINT('',(0.,0.));+#7686 = VECTOR('',#7687,1.);+#7687 = DIRECTION('',(0.,1.));+#7688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7689 = PCURVE('',#1973,#7690);+#7690 = DEFINITIONAL_REPRESENTATION('',(#7691),#7695);+#7691 = LINE('',#7692,#7693);+#7692 = CARTESIAN_POINT('',(1.999289622745E-12,0.));+#7693 = VECTOR('',#7694,1.);+#7694 = DIRECTION('',(0.,-1.));+#7695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7696 = ORIENTED_EDGE('',*,*,#7431,.T.);+#7697 = ORIENTED_EDGE('',*,*,#7650,.T.);+#7698 = ADVANCED_FACE('',(#7699),#1973,.F.);+#7699 = FACE_BOUND('',#7700,.F.);+#7700 = EDGE_LOOP('',(#7701,#7702,#7723,#7724));+#7701 = ORIENTED_EDGE('',*,*,#1957,.T.);+#7702 = ORIENTED_EDGE('',*,*,#7703,.F.);+#7703 = EDGE_CURVE('',#7455,#1925,#7704,.T.);+#7704 = SURFACE_CURVE('',#7705,(#7709,#7716),.PCURVE_S1.);+#7705 = LINE('',#7706,#7707);+#7706 = CARTESIAN_POINT('',(1.599462039419,3.285692661496,+    9.314404469578E-02));+#7707 = VECTOR('',#7708,1.);+#7708 = DIRECTION('',(0.,1.001231311922E-13,-1.));+#7709 = PCURVE('',#1973,#7710);+#7710 = DEFINITIONAL_REPRESENTATION('',(#7711),#7715);+#7711 = LINE('',#7712,#7713);+#7712 = CARTESIAN_POINT('',(1.125000000003,0.));+#7713 = VECTOR('',#7714,1.);+#7714 = DIRECTION('',(-1.001231311922E-13,-1.));+#7715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7716 = PCURVE('',#1945,#7717);+#7717 = DEFINITIONAL_REPRESENTATION('',(#7718),#7722);+#7718 = LINE('',#7719,#7720);+#7719 = CARTESIAN_POINT('',(6.28318530718,0.));+#7720 = VECTOR('',#7721,1.);+#7721 = DIRECTION('',(0.,1.));+#7722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7723 = ORIENTED_EDGE('',*,*,#7454,.F.);+#7724 = ORIENTED_EDGE('',*,*,#7676,.T.);+#7725 = ADVANCED_FACE('',(#7726),#1945,.F.);+#7726 = FACE_BOUND('',#7727,.F.);+#7727 = EDGE_LOOP('',(#7728,#7729,#7750,#7751));+#7728 = ORIENTED_EDGE('',*,*,#1924,.F.);+#7729 = ORIENTED_EDGE('',*,*,#7730,.T.);+#7730 = EDGE_CURVE('',#1897,#7478,#7731,.T.);+#7731 = SURFACE_CURVE('',#7732,(#7736,#7743),.PCURVE_S1.);+#7732 = LINE('',#7733,#7734);+#7733 = CARTESIAN_POINT('',(1.899462039395,3.28569266145,0.));+#7734 = VECTOR('',#7735,1.);+#7735 = DIRECTION('',(0.,-2.080367955449E-10,1.));+#7736 = PCURVE('',#1945,#7737);+#7737 = DEFINITIONAL_REPRESENTATION('',(#7738),#7742);+#7738 = LINE('',#7739,#7740);+#7739 = CARTESIAN_POINT('',(3.141592653896,9.314404469578E-02));+#7740 = VECTOR('',#7741,1.);+#7741 = DIRECTION('',(1.386915148811E-09,-1.));+#7742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7743 = PCURVE('',#1912,#7744);+#7744 = DEFINITIONAL_REPRESENTATION('',(#7745),#7749);+#7745 = LINE('',#7746,#7747);+#7746 = CARTESIAN_POINT('',(-1.050000000052,-9.314404469578E-02));+#7747 = VECTOR('',#7748,1.);+#7748 = DIRECTION('',(-2.080367955449E-10,1.));+#7749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7750 = ORIENTED_EDGE('',*,*,#7477,.T.);+#7751 = ORIENTED_EDGE('',*,*,#7703,.T.);+#7752 = ADVANCED_FACE('',(#7753),#1912,.F.);+#7753 = FACE_BOUND('',#7754,.F.);+#7754 = EDGE_LOOP('',(#7755,#7756,#7777,#7778));+#7755 = ORIENTED_EDGE('',*,*,#1896,.T.);+#7756 = ORIENTED_EDGE('',*,*,#7757,.T.);+#7757 = EDGE_CURVE('',#1869,#7506,#7758,.T.);+#7758 = SURFACE_CURVE('',#7759,(#7763,#7770),.PCURVE_S1.);+#7759 = LINE('',#7760,#7761);+#7760 = CARTESIAN_POINT('',(1.899462039389,4.41069266152,0.));+#7761 = VECTOR('',#7762,1.);+#7762 = DIRECTION('',(0.,0.,1.));+#7763 = PCURVE('',#1912,#7764);+#7764 = DEFINITIONAL_REPRESENTATION('',(#7765),#7769);+#7765 = LINE('',#7766,#7767);+#7766 = CARTESIAN_POINT('',(7.5000000018E-02,-9.314404469578E-02));+#7767 = VECTOR('',#7768,1.);+#7768 = DIRECTION('',(0.,1.));+#7769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7770 = PCURVE('',#1884,#7771);+#7771 = DEFINITIONAL_REPRESENTATION('',(#7772),#7776);+#7772 = LINE('',#7773,#7774);+#7773 = CARTESIAN_POINT('',(9.604686352854E-02,9.314404469578E-02));+#7774 = VECTOR('',#7775,1.);+#7775 = DIRECTION('',(0.,-1.));+#7776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7777 = ORIENTED_EDGE('',*,*,#7505,.F.);+#7778 = ORIENTED_EDGE('',*,*,#7730,.F.);+#7779 = ADVANCED_FACE('',(#7780),#1884,.F.);+#7780 = FACE_BOUND('',#7781,.F.);+#7781 = EDGE_LOOP('',(#7782,#7783,#7804,#7805));+#7782 = ORIENTED_EDGE('',*,*,#1868,.F.);+#7783 = ORIENTED_EDGE('',*,*,#7784,.F.);+#7784 = EDGE_CURVE('',#7529,#1841,#7785,.T.);+#7785 = SURFACE_CURVE('',#7786,(#7790,#7797),.PCURVE_S1.);+#7786 = LINE('',#7787,#7788);+#7787 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+    9.314404469578E-02));+#7788 = VECTOR('',#7789,1.);+#7789 = DIRECTION('',(0.,0.,-1.));+#7790 = PCURVE('',#1884,#7791);+#7791 = DEFINITIONAL_REPRESENTATION('',(#7792),#7796);+#7792 = LINE('',#7793,#7794);+#7793 = CARTESIAN_POINT('',(0.,0.));+#7794 = VECTOR('',#7795,1.);+#7795 = DIRECTION('',(0.,1.));+#7796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7797 = PCURVE('',#1856,#7798);+#7798 = DEFINITIONAL_REPRESENTATION('',(#7799),#7803);+#7799 = LINE('',#7800,#7801);+#7800 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#7801 = VECTOR('',#7802,1.);+#7802 = DIRECTION('',(1.,0.));+#7803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7804 = ORIENTED_EDGE('',*,*,#7528,.T.);+#7805 = ORIENTED_EDGE('',*,*,#7757,.F.);+#7806 = ADVANCED_FACE('',(#7807),#1856,.F.);+#7807 = FACE_BOUND('',#7808,.F.);+#7808 = EDGE_LOOP('',(#7809,#7810,#7811,#7812));+#7809 = ORIENTED_EDGE('',*,*,#6379,.T.);+#7810 = ORIENTED_EDGE('',*,*,#7551,.F.);+#7811 = ORIENTED_EDGE('',*,*,#7784,.T.);+#7812 = ORIENTED_EDGE('',*,*,#1840,.F.);+#7813 = ADVANCED_FACE('',(#7814),#6344,.T.);+#7814 = FACE_BOUND('',#7815,.F.);+#7815 = EDGE_LOOP('',(#7816,#7817,#7840,#7861));+#7816 = ORIENTED_EDGE('',*,*,#6328,.F.);+#7817 = ORIENTED_EDGE('',*,*,#7818,.F.);+#7818 = EDGE_CURVE('',#7819,#6301,#7821,.T.);+#7819 = VERTEX_POINT('',#7820);+#7820 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,0.193144044696+    ));+#7821 = SURFACE_CURVE('',#7822,(#7826,#7833),.PCURVE_S1.);+#7822 = LINE('',#7823,#7824);+#7823 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,0.193144044696+    ));+#7824 = VECTOR('',#7825,1.);+#7825 = DIRECTION('',(0.,1.,0.));+#7826 = PCURVE('',#6344,#7827);+#7827 = DEFINITIONAL_REPRESENTATION('',(#7828),#7832);+#7828 = LINE('',#7829,#7830);+#7829 = CARTESIAN_POINT('',(1.2860541093E-02,0.));+#7830 = VECTOR('',#7831,1.);+#7831 = DIRECTION('',(1.,0.));+#7832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7833 = PCURVE('',#6316,#7834);+#7834 = DEFINITIONAL_REPRESENTATION('',(#7835),#7839);+#7835 = LINE('',#7836,#7837);+#7836 = CARTESIAN_POINT('',(3.140420397E-02,0.680398267778));+#7837 = VECTOR('',#7838,1.);+#7838 = DIRECTION('',(0.,1.));+#7839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7840 = ORIENTED_EDGE('',*,*,#7841,.T.);+#7841 = EDGE_CURVE('',#7819,#7574,#7842,.T.);+#7842 = SURFACE_CURVE('',#7843,(#7847,#7854),.PCURVE_S1.);+#7843 = LINE('',#7844,#7845);+#7844 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,0.193144044696+    ));+#7845 = VECTOR('',#7846,1.);+#7846 = DIRECTION('',(0.,0.,-1.));+#7847 = PCURVE('',#6344,#7848);+#7848 = DEFINITIONAL_REPRESENTATION('',(#7849),#7853);+#7849 = LINE('',#7850,#7851);+#7850 = CARTESIAN_POINT('',(1.2860541093E-02,0.));+#7851 = VECTOR('',#7852,1.);+#7852 = DIRECTION('',(0.,1.));+#7853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7854 = PCURVE('',#7612,#7855);+#7855 = DEFINITIONAL_REPRESENTATION('',(#7856),#7860);+#7856 = LINE('',#7857,#7858);+#7857 = CARTESIAN_POINT('',(0.244312044381,0.));+#7858 = VECTOR('',#7859,1.);+#7859 = DIRECTION('',(0.,-1.));+#7860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7861 = ORIENTED_EDGE('',*,*,#7573,.F.);+#7862 = ADVANCED_FACE('',(#7863),#6316,.F.);+#7863 = FACE_BOUND('',#7864,.F.);+#7864 = EDGE_LOOP('',(#7865,#7866,#7889,#7910));+#7865 = ORIENTED_EDGE('',*,*,#6300,.F.);+#7866 = ORIENTED_EDGE('',*,*,#7867,.F.);+#7867 = EDGE_CURVE('',#7868,#6273,#7870,.T.);+#7868 = VERTEX_POINT('',#7869);+#7869 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+  );+#7870 = SURFACE_CURVE('',#7871,(#7875,#7882),.PCURVE_S1.);+#7871 = LINE('',#7872,#7873);+#7872 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+  );+#7873 = VECTOR('',#7874,1.);+#7874 = DIRECTION('',(0.,1.,0.));+#7875 = PCURVE('',#6316,#7876);+#7876 = DEFINITIONAL_REPRESENTATION('',(#7877),#7881);+#7877 = LINE('',#7878,#7879);+#7878 = CARTESIAN_POINT('',(-4.8595796028E-02,0.680398267778));+#7879 = VECTOR('',#7880,1.);+#7880 = DIRECTION('',(0.,1.));+#7881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7882 = PCURVE('',#6288,#7883);+#7883 = DEFINITIONAL_REPRESENTATION('',(#7884),#7888);+#7884 = LINE('',#7885,#7886);+#7885 = CARTESIAN_POINT('',(0.122139458907,0.));+#7886 = VECTOR('',#7887,1.);+#7887 = DIRECTION('',(-1.,0.));+#7888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7889 = ORIENTED_EDGE('',*,*,#7890,.T.);+#7890 = EDGE_CURVE('',#7868,#7819,#7891,.T.);+#7891 = SURFACE_CURVE('',#7892,(#7896,#7903),.PCURVE_S1.);+#7892 = LINE('',#7893,#7894);+#7893 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+  );+#7894 = VECTOR('',#7895,1.);+#7895 = DIRECTION('',(1.,0.,0.));+#7896 = PCURVE('',#6316,#7897);+#7897 = DEFINITIONAL_REPRESENTATION('',(#7898),#7902);+#7898 = LINE('',#7899,#7900);+#7899 = CARTESIAN_POINT('',(-4.8595796028E-02,0.680398267778));+#7900 = VECTOR('',#7901,1.);+#7901 = DIRECTION('',(1.,0.));+#7902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7903 = PCURVE('',#7612,#7904);+#7904 = DEFINITIONAL_REPRESENTATION('',(#7905),#7909);+#7905 = LINE('',#7906,#7907);+#7906 = CARTESIAN_POINT('',(0.324312044379,0.));+#7907 = VECTOR('',#7908,1.);+#7908 = DIRECTION('',(-1.,0.));+#7909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7910 = ORIENTED_EDGE('',*,*,#7818,.T.);+#7911 = ADVANCED_FACE('',(#7912),#6288,.T.);+#7912 = FACE_BOUND('',#7913,.F.);+#7913 = EDGE_LOOP('',(#7914,#7915,#7916,#7937));+#7914 = ORIENTED_EDGE('',*,*,#6272,.T.);+#7915 = ORIENTED_EDGE('',*,*,#7624,.F.);+#7916 = ORIENTED_EDGE('',*,*,#7917,.F.);+#7917 = EDGE_CURVE('',#7868,#7597,#7918,.T.);+#7918 = SURFACE_CURVE('',#7919,(#7923,#7930),.PCURVE_S1.);+#7919 = LINE('',#7920,#7921);+#7920 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+  );+#7921 = VECTOR('',#7922,1.);+#7922 = DIRECTION('',(0.,0.,-1.));+#7923 = PCURVE('',#6288,#7924);+#7924 = DEFINITIONAL_REPRESENTATION('',(#7925),#7929);+#7925 = LINE('',#7926,#7927);+#7926 = CARTESIAN_POINT('',(0.122139458907,0.));+#7927 = VECTOR('',#7928,1.);+#7928 = DIRECTION('',(0.,1.));+#7929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7930 = PCURVE('',#7612,#7931);+#7931 = DEFINITIONAL_REPRESENTATION('',(#7932),#7936);+#7932 = LINE('',#7933,#7934);+#7933 = CARTESIAN_POINT('',(0.324312044379,0.));+#7934 = VECTOR('',#7935,1.);+#7935 = DIRECTION('',(0.,-1.));+#7936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7937 = ORIENTED_EDGE('',*,*,#7867,.T.);+#7938 = ADVANCED_FACE('',(#7939),#7612,.T.);+#7939 = FACE_BOUND('',#7940,.F.);+#7940 = EDGE_LOOP('',(#7941,#7942,#7943,#7944));+#7941 = ORIENTED_EDGE('',*,*,#7841,.F.);+#7942 = ORIENTED_EDGE('',*,*,#7890,.F.);+#7943 = ORIENTED_EDGE('',*,*,#7917,.T.);+#7944 = ORIENTED_EDGE('',*,*,#7596,.F.);+#7945 = ADVANCED_FACE('',(#7946),#1805,.F.);+#7946 = FACE_BOUND('',#7947,.F.);+#7947 = EDGE_LOOP('',(#7948,#7949,#7950,#7973));+#7948 = ORIENTED_EDGE('',*,*,#6401,.F.);+#7949 = ORIENTED_EDGE('',*,*,#1789,.T.);+#7950 = ORIENTED_EDGE('',*,*,#7951,.T.);+#7951 = EDGE_CURVE('',#1762,#7952,#7954,.T.);+#7952 = VERTEX_POINT('',#7953);+#7953 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+    9.314404469578E-02));+#7954 = SURFACE_CURVE('',#7955,(#7959,#7966),.PCURVE_S1.);+#7955 = LINE('',#7956,#7957);+#7956 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,0.));+#7957 = VECTOR('',#7958,1.);+#7958 = DIRECTION('',(0.,0.,1.));+#7959 = PCURVE('',#1805,#7960);+#7960 = DEFINITIONAL_REPRESENTATION('',(#7961),#7965);+#7961 = LINE('',#7962,#7963);+#7962 = CARTESIAN_POINT('',(6.855955304215E-03,0.));+#7963 = VECTOR('',#7964,1.);+#7964 = DIRECTION('',(1.,0.));+#7965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7966 = PCURVE('',#1777,#7967);+#7967 = DEFINITIONAL_REPRESENTATION('',(#7968),#7972);+#7968 = LINE('',#7969,#7970);+#7969 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#7970 = VECTOR('',#7971,1.);+#7971 = DIRECTION('',(0.,1.));+#7972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7973 = ORIENTED_EDGE('',*,*,#7974,.T.);+#7974 = EDGE_CURVE('',#7952,#6402,#7975,.T.);+#7975 = SURFACE_CURVE('',#7976,(#7980,#7987),.PCURVE_S1.);+#7976 = LINE('',#7977,#7978);+#7977 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+    9.314404469578E-02));+#7978 = VECTOR('',#7979,1.);+#7979 = DIRECTION('',(0.,1.,0.));+#7980 = PCURVE('',#1805,#7981);+#7981 = DEFINITIONAL_REPRESENTATION('',(#7982),#7986);+#7982 = LINE('',#7983,#7984);+#7983 = CARTESIAN_POINT('',(9.999999999999E-02,0.));+#7984 = VECTOR('',#7985,1.);+#7985 = DIRECTION('',(0.,1.));+#7986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7987 = PCURVE('',#6440,#7988);+#7988 = DEFINITIONAL_REPRESENTATION('',(#7989),#7993);+#7989 = LINE('',#7990,#7991);+#7990 = CARTESIAN_POINT('',(-8.999999999E-02,0.270508689474));+#7991 = VECTOR('',#7992,1.);+#7992 = DIRECTION('',(0.,1.));+#7993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#7994 = ADVANCED_FACE('',(#7995),#1777,.F.);+#7995 = FACE_BOUND('',#7996,.F.);+#7996 = EDGE_LOOP('',(#7997,#7998,#8021,#8042));+#7997 = ORIENTED_EDGE('',*,*,#1761,.T.);+#7998 = ORIENTED_EDGE('',*,*,#7999,.F.);+#7999 = EDGE_CURVE('',#8000,#1734,#8002,.T.);+#8000 = VERTEX_POINT('',#8001);+#8001 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+    9.314404469578E-02));+#8002 = SURFACE_CURVE('',#8003,(#8007,#8014),.PCURVE_S1.);+#8003 = LINE('',#8004,#8005);+#8004 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+    9.314404469578E-02));+#8005 = VECTOR('',#8006,1.);+#8006 = DIRECTION('',(0.,1.907107260804E-14,-1.));+#8007 = PCURVE('',#1777,#8008);+#8008 = DEFINITIONAL_REPRESENTATION('',(#8009),#8013);+#8009 = LINE('',#8010,#8011);+#8010 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#8011 = VECTOR('',#8012,1.);+#8012 = DIRECTION('',(-1.728188445828E-14,-1.));+#8013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8014 = PCURVE('',#1749,#8015);+#8015 = DEFINITIONAL_REPRESENTATION('',(#8016),#8020);+#8016 = LINE('',#8017,#8018);+#8017 = CARTESIAN_POINT('',(0.,0.));+#8018 = VECTOR('',#8019,1.);+#8019 = DIRECTION('',(-1.907107260804E-14,-1.));+#8020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8021 = ORIENTED_EDGE('',*,*,#8022,.T.);+#8022 = EDGE_CURVE('',#8000,#7952,#8023,.T.);+#8023 = SURFACE_CURVE('',#8024,(#8028,#8035),.PCURVE_S1.);+#8024 = LINE('',#8025,#8026);+#8025 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+    9.314404469578E-02));+#8026 = VECTOR('',#8027,1.);+#8027 = DIRECTION('',(0.422885465415,0.906183139956,0.));+#8028 = PCURVE('',#1777,#8029);+#8029 = DEFINITIONAL_REPRESENTATION('',(#8030),#8034);+#8030 = LINE('',#8031,#8032);+#8031 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#8032 = VECTOR('',#8033,1.);+#8033 = DIRECTION('',(-1.,0.));+#8034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8035 = PCURVE('',#6440,#8036);+#8036 = DEFINITIONAL_REPRESENTATION('',(#8037),#8041);+#8037 = LINE('',#8038,#8039);+#8038 = CARTESIAN_POINT('',(-0.124999999997,0.195508689477));+#8039 = VECTOR('',#8040,1.);+#8040 = DIRECTION('',(0.422885465415,0.906183139956));+#8041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8042 = ORIENTED_EDGE('',*,*,#7951,.F.);+#8043 = ADVANCED_FACE('',(#8044),#1749,.F.);+#8044 = FACE_BOUND('',#8045,.F.);+#8045 = EDGE_LOOP('',(#8046,#8047,#8070,#8091));+#8046 = ORIENTED_EDGE('',*,*,#1733,.T.);+#8047 = ORIENTED_EDGE('',*,*,#8048,.F.);+#8048 = EDGE_CURVE('',#8049,#1701,#8051,.T.);+#8049 = VERTEX_POINT('',#8050);+#8050 = CARTESIAN_POINT('',(2.124462039406,4.010692661363,+    9.314404469578E-02));+#8051 = SURFACE_CURVE('',#8052,(#8056,#8063),.PCURVE_S1.);+#8052 = LINE('',#8053,#8054);+#8053 = CARTESIAN_POINT('',(2.124462039413,4.01069266145,+    9.314404469578E-02));+#8054 = VECTOR('',#8055,1.);+#8055 = DIRECTION('',(0.,1.715729047183E-10,-1.));+#8056 = PCURVE('',#1749,#8057);+#8057 = DEFINITIONAL_REPRESENTATION('',(#8058),#8062);+#8058 = LINE('',#8059,#8060);+#8059 = CARTESIAN_POINT('',(0.400000000049,0.));+#8060 = VECTOR('',#8061,1.);+#8061 = DIRECTION('',(-1.715729047183E-10,-1.));+#8062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8063 = PCURVE('',#1721,#8064);+#8064 = DEFINITIONAL_REPRESENTATION('',(#8065),#8069);+#8065 = LINE('',#8066,#8067);+#8066 = CARTESIAN_POINT('',(6.28318530718,1.492695061669E-20));+#8067 = VECTOR('',#8068,1.);+#8068 = DIRECTION('',(0.,1.));+#8069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8070 = ORIENTED_EDGE('',*,*,#8071,.F.);+#8071 = EDGE_CURVE('',#8000,#8049,#8072,.T.);+#8072 = SURFACE_CURVE('',#8073,(#8077,#8084),.PCURVE_S1.);+#8073 = LINE('',#8074,#8075);+#8074 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+    9.314404469578E-02));+#8075 = VECTOR('',#8076,1.);+#8076 = DIRECTION('',(-9.092726570574E-12,-1.,0.));+#8077 = PCURVE('',#1749,#8078);+#8078 = DEFINITIONAL_REPRESENTATION('',(#8079),#8083);+#8079 = LINE('',#8080,#8081);+#8080 = CARTESIAN_POINT('',(0.,0.));+#8081 = VECTOR('',#8082,1.);+#8082 = DIRECTION('',(1.,0.));+#8083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8084 = PCURVE('',#6440,#8085);+#8085 = DEFINITIONAL_REPRESENTATION('',(#8086),#8090);+#8086 = LINE('',#8087,#8088);+#8087 = CARTESIAN_POINT('',(-0.124999999997,0.195508689477));+#8088 = VECTOR('',#8089,1.);+#8089 = DIRECTION('',(-9.092726570574E-12,-1.));+#8090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8091 = ORIENTED_EDGE('',*,*,#7999,.T.);+#8092 = ADVANCED_FACE('',(#8093),#1721,.F.);+#8093 = FACE_BOUND('',#8094,.F.);+#8094 = EDGE_LOOP('',(#8095,#8096,#8119,#8145));+#8095 = ORIENTED_EDGE('',*,*,#1700,.F.);+#8096 = ORIENTED_EDGE('',*,*,#8097,.T.);+#8097 = EDGE_CURVE('',#1673,#8098,#8100,.T.);+#8098 = VERTEX_POINT('',#8099);+#8099 = CARTESIAN_POINT('',(2.374462039406,4.010692661582,+    9.314404469578E-02));+#8100 = SURFACE_CURVE('',#8101,(#8105,#8112),.PCURVE_S1.);+#8101 = LINE('',#8102,#8103);+#8102 = CARTESIAN_POINT('',(2.374462039411,4.010692661512,0.));+#8103 = VECTOR('',#8104,1.);+#8104 = DIRECTION('',(0.,1.13224958074E-10,1.));+#8105 = PCURVE('',#1721,#8106);+#8106 = DEFINITIONAL_REPRESENTATION('',(#8107),#8111);+#8107 = LINE('',#8108,#8109);+#8108 = CARTESIAN_POINT('',(3.141592653444,9.314404469578E-02));+#8109 = VECTOR('',#8110,1.);+#8110 = DIRECTION('',(-9.057996645917E-10,-1.));+#8111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8112 = PCURVE('',#1688,#8113);+#8113 = DEFINITIONAL_REPRESENTATION('',(#8114),#8118);+#8114 = LINE('',#8115,#8116);+#8115 = CARTESIAN_POINT('',(-0.32499999999,-9.314404469578E-02));+#8116 = VECTOR('',#8117,1.);+#8117 = DIRECTION('',(1.13224958074E-10,1.));+#8118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8119 = ORIENTED_EDGE('',*,*,#8120,.T.);+#8120 = EDGE_CURVE('',#8098,#8049,#8121,.T.);+#8121 = SURFACE_CURVE('',#8122,(#8127,#8134),.PCURVE_S1.);+#8122 = CIRCLE('',#8123,0.125);+#8123 = AXIS2_PLACEMENT_3D('',#8124,#8125,#8126);+#8124 = CARTESIAN_POINT('',(2.249462039406,4.010692661494,+    9.314404469578E-02));+#8125 = DIRECTION('',(0.,0.,-1.));+#8126 = DIRECTION('',(1.,6.995435342105E-10,0.));+#8127 = PCURVE('',#1721,#8128);+#8128 = DEFINITIONAL_REPRESENTATION('',(#8129),#8133);+#8129 = LINE('',#8130,#8131);+#8130 = CARTESIAN_POINT('',(3.141592652888,0.));+#8131 = VECTOR('',#8132,1.);+#8132 = DIRECTION('',(1.,0.));+#8133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8134 = PCURVE('',#6440,#8135);+#8135 = DEFINITIONAL_REPRESENTATION('',(#8136),#8144);+#8136 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8137,#8138,#8139,#8140,+#8141,#8142,#8143),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8137 = CARTESIAN_POINT('',(0.124999999992,-0.204491310441));+#8138 = CARTESIAN_POINT('',(0.125000000143,-0.420997661387));+#8139 = CARTESIAN_POINT('',(-6.249999993227E-02,-0.312744486045));+#8140 = CARTESIAN_POINT('',(-0.250000000008,-0.204491310703));+#8141 = CARTESIAN_POINT('',(-6.250000008373E-02,-9.623813509867E-02));+#8142 = CARTESIAN_POINT('',(0.124999999841,1.201504050555E-02));+#8143 = CARTESIAN_POINT('',(0.124999999992,-0.204491310441));+#8144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8145 = ORIENTED_EDGE('',*,*,#8048,.T.);+#8146 = ADVANCED_FACE('',(#8147),#1688,.F.);+#8147 = FACE_BOUND('',#8148,.F.);+#8148 = EDGE_LOOP('',(#8149,#8150,#8173,#8194));+#8149 = ORIENTED_EDGE('',*,*,#1672,.T.);+#8150 = ORIENTED_EDGE('',*,*,#8151,.T.);+#8151 = EDGE_CURVE('',#1645,#8152,#8154,.T.);+#8152 = VERTEX_POINT('',#8153);+#8153 = CARTESIAN_POINT('',(2.374462039413,4.410692661497,+    9.314404469578E-02));+#8154 = SURFACE_CURVE('',#8155,(#8159,#8166),.PCURVE_S1.);+#8155 = LINE('',#8156,#8157);+#8156 = CARTESIAN_POINT('',(2.374462039413,4.410692661497,0.));+#8157 = VECTOR('',#8158,1.);+#8158 = DIRECTION('',(0.,0.,1.));+#8159 = PCURVE('',#1688,#8160);+#8160 = DEFINITIONAL_REPRESENTATION('',(#8161),#8165);+#8161 = LINE('',#8162,#8163);+#8162 = CARTESIAN_POINT('',(7.4999999995E-02,-9.314404469578E-02));+#8163 = VECTOR('',#8164,1.);+#8164 = DIRECTION('',(0.,1.));+#8165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8166 = PCURVE('',#1660,#8167);+#8167 = DEFINITIONAL_REPRESENTATION('',(#8168),#8172);+#8168 = LINE('',#8169,#8170);+#8169 = CARTESIAN_POINT('',(8.276472678158E-02,9.314404469578E-02));+#8170 = VECTOR('',#8171,1.);+#8171 = DIRECTION('',(0.,-1.));+#8172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8173 = ORIENTED_EDGE('',*,*,#8174,.F.);+#8174 = EDGE_CURVE('',#8098,#8152,#8175,.T.);+#8175 = SURFACE_CURVE('',#8176,(#8180,#8187),.PCURVE_S1.);+#8176 = LINE('',#8177,#8178);+#8177 = CARTESIAN_POINT('',(2.374462039411,4.010692661523,+    9.314404469578E-02));+#8178 = VECTOR('',#8179,1.);+#8179 = DIRECTION('',(6.058487045776E-12,1.,0.));+#8180 = PCURVE('',#1688,#8181);+#8181 = DEFINITIONAL_REPRESENTATION('',(#8182),#8186);+#8182 = LINE('',#8183,#8184);+#8183 = CARTESIAN_POINT('',(-0.324999999979,0.));+#8184 = VECTOR('',#8185,1.);+#8185 = DIRECTION('',(1.,0.));+#8186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8187 = PCURVE('',#6440,#8188);+#8188 = DEFINITIONAL_REPRESENTATION('',(#8189),#8193);+#8189 = LINE('',#8190,#8191);+#8190 = CARTESIAN_POINT('',(0.124999999997,-0.204491310499));+#8191 = VECTOR('',#8192,1.);+#8192 = DIRECTION('',(6.058487045776E-12,1.));+#8193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8194 = ORIENTED_EDGE('',*,*,#8097,.F.);+#8195 = ADVANCED_FACE('',(#8196),#1660,.F.);+#8196 = FACE_BOUND('',#8197,.F.);+#8197 = EDGE_LOOP('',(#8198,#8199,#8222,#8243));+#8198 = ORIENTED_EDGE('',*,*,#1644,.F.);+#8199 = ORIENTED_EDGE('',*,*,#8200,.F.);+#8200 = EDGE_CURVE('',#8201,#1617,#8203,.T.);+#8201 = VERTEX_POINT('',#8202);+#8202 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+    9.314404469578E-02));+#8203 = SURFACE_CURVE('',#8204,(#8208,#8215),.PCURVE_S1.);+#8204 = LINE('',#8205,#8206);+#8205 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+    9.314404469578E-02));+#8206 = VECTOR('',#8207,1.);+#8207 = DIRECTION('',(0.,0.,-1.));+#8208 = PCURVE('',#1660,#8209);+#8209 = DEFINITIONAL_REPRESENTATION('',(#8210),#8214);+#8210 = LINE('',#8211,#8212);+#8211 = CARTESIAN_POINT('',(0.,0.));+#8212 = VECTOR('',#8213,1.);+#8213 = DIRECTION('',(0.,1.));+#8214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8215 = PCURVE('',#1632,#8216);+#8216 = DEFINITIONAL_REPRESENTATION('',(#8217),#8221);+#8217 = LINE('',#8218,#8219);+#8218 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#8219 = VECTOR('',#8220,1.);+#8220 = DIRECTION('',(1.,0.));+#8221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8222 = ORIENTED_EDGE('',*,*,#8223,.T.);+#8223 = EDGE_CURVE('',#8201,#8152,#8224,.T.);+#8224 = SURFACE_CURVE('',#8225,(#8229,#8236),.PCURVE_S1.);+#8225 = LINE('',#8226,#8227);+#8226 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+    9.314404469578E-02));+#8227 = VECTOR('',#8228,1.);+#8228 = DIRECTION('',(0.422885465219,-0.906183140048,0.));+#8229 = PCURVE('',#1660,#8230);+#8230 = DEFINITIONAL_REPRESENTATION('',(#8231),#8235);+#8231 = LINE('',#8232,#8233);+#8232 = CARTESIAN_POINT('',(0.,0.));+#8233 = VECTOR('',#8234,1.);+#8234 = DIRECTION('',(1.,0.));+#8235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8236 = PCURVE('',#6440,#8237);+#8237 = DEFINITIONAL_REPRESENTATION('',(#8238),#8242);+#8238 = LINE('',#8239,#8240);+#8239 = CARTESIAN_POINT('',(9.000000001E-02,0.270508689475));+#8240 = VECTOR('',#8241,1.);+#8241 = DIRECTION('',(0.422885465219,-0.906183140048));+#8242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8243 = ORIENTED_EDGE('',*,*,#8151,.F.);+#8244 = ADVANCED_FACE('',(#8245),#1632,.F.);+#8245 = FACE_BOUND('',#8246,.F.);+#8246 = EDGE_LOOP('',(#8247,#8248,#8269,#8270));+#8247 = ORIENTED_EDGE('',*,*,#6559,.T.);+#8248 = ORIENTED_EDGE('',*,*,#8249,.F.);+#8249 = EDGE_CURVE('',#8201,#6537,#8250,.T.);+#8250 = SURFACE_CURVE('',#8251,(#8255,#8262),.PCURVE_S1.);+#8251 = LINE('',#8252,#8253);+#8252 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+    9.314404469578E-02));+#8253 = VECTOR('',#8254,1.);+#8254 = DIRECTION('',(0.,1.,0.));+#8255 = PCURVE('',#1632,#8256);+#8256 = DEFINITIONAL_REPRESENTATION('',(#8257),#8261);+#8257 = LINE('',#8258,#8259);+#8258 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#8259 = VECTOR('',#8260,1.);+#8260 = DIRECTION('',(0.,1.));+#8261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8262 = PCURVE('',#6440,#8263);+#8263 = DEFINITIONAL_REPRESENTATION('',(#8264),#8268);+#8264 = LINE('',#8265,#8266);+#8265 = CARTESIAN_POINT('',(9.000000001E-02,0.270508689475));+#8266 = VECTOR('',#8267,1.);+#8267 = DIRECTION('',(0.,1.));+#8268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8269 = ORIENTED_EDGE('',*,*,#8200,.T.);+#8270 = ORIENTED_EDGE('',*,*,#1616,.F.);+#8271 = ADVANCED_FACE('',(#8272),#6440,.F.);+#8272 = FACE_BOUND('',#8273,.F.);+#8273 = EDGE_LOOP('',(#8274,#8275,#8276,#8277,#8278,#8279,#8280,#8281,+    #8282,#8283,#8306,#8334));+#8274 = ORIENTED_EDGE('',*,*,#6424,.F.);+#8275 = ORIENTED_EDGE('',*,*,#7974,.F.);+#8276 = ORIENTED_EDGE('',*,*,#8022,.F.);+#8277 = ORIENTED_EDGE('',*,*,#8071,.T.);+#8278 = ORIENTED_EDGE('',*,*,#8120,.F.);+#8279 = ORIENTED_EDGE('',*,*,#8174,.T.);+#8280 = ORIENTED_EDGE('',*,*,#8223,.F.);+#8281 = ORIENTED_EDGE('',*,*,#8249,.T.);+#8282 = ORIENTED_EDGE('',*,*,#6536,.F.);+#8283 = ORIENTED_EDGE('',*,*,#8284,.T.);+#8284 = EDGE_CURVE('',#6509,#8285,#8287,.T.);+#8285 = VERTEX_POINT('',#8286);+#8286 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,+    9.314404469578E-02));+#8287 = SURFACE_CURVE('',#8288,(#8292,#8299),.PCURVE_S1.);+#8288 = LINE('',#8289,#8290);+#8289 = CARTESIAN_POINT('',(2.28925867829,4.5,9.314404469578E-02));+#8290 = VECTOR('',#8291,1.);+#8291 = DIRECTION('',(0.,-1.,0.));+#8292 = PCURVE('',#6440,#8293);+#8293 = DEFINITIONAL_REPRESENTATION('',(#8294),#8298);+#8294 = LINE('',#8295,#8296);+#8295 = CARTESIAN_POINT('',(3.9796638876E-02,0.284816027978));+#8296 = VECTOR('',#8297,1.);+#8297 = DIRECTION('',(0.,-1.));+#8298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8299 = PCURVE('',#6524,#8300);+#8300 = DEFINITIONAL_REPRESENTATION('',(#8301),#8305);+#8301 = LINE('',#8302,#8303);+#8302 = CARTESIAN_POINT('',(7.4016088552E-02,0.1));+#8303 = VECTOR('',#8304,1.);+#8304 = DIRECTION('',(-1.,0.));+#8305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8306 = ORIENTED_EDGE('',*,*,#8307,.T.);+#8307 = EDGE_CURVE('',#8285,#8308,#8310,.T.);+#8308 = VERTEX_POINT('',#8309);+#8309 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,+    9.314404469578E-02));+#8310 = SURFACE_CURVE('',#8311,(#8315,#8322),.PCURVE_S1.);+#8311 = LINE('',#8312,#8313);+#8312 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,+    9.314404469578E-02));+#8313 = VECTOR('',#8314,1.);+#8314 = DIRECTION('',(-1.,0.,0.));+#8315 = PCURVE('',#6440,#8316);+#8316 = DEFINITIONAL_REPRESENTATION('',(#8317),#8321);+#8317 = LINE('',#8318,#8319);+#8318 = CARTESIAN_POINT('',(3.9796638876E-02,0.223473373328));+#8319 = VECTOR('',#8320,1.);+#8320 = DIRECTION('',(-1.,0.));+#8321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8322 = PCURVE('',#8323,#8328);+#8323 = PLANE('',#8324);+#8324 = AXIS2_PLACEMENT_3D('',#8325,#8326,#8327);+#8325 = CARTESIAN_POINT('',(2.443947504768,4.43865734535,0.193144044696)+  );+#8326 = DIRECTION('',(0.,1.,0.));+#8327 = DIRECTION('',(-1.,0.,0.));+#8328 = DEFINITIONAL_REPRESENTATION('',(#8329),#8333);+#8329 = LINE('',#8330,#8331);+#8330 = CARTESIAN_POINT('',(0.154688826478,-0.1));+#8331 = VECTOR('',#8332,1.);+#8332 = DIRECTION('',(1.,0.));+#8333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8334 = ORIENTED_EDGE('',*,*,#8335,.T.);+#8335 = EDGE_CURVE('',#8308,#6425,#8336,.T.);+#8336 = SURFACE_CURVE('',#8337,(#8341,#8348),.PCURVE_S1.);+#8337 = LINE('',#8338,#8339);+#8338 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,+    9.314404469578E-02));+#8339 = VECTOR('',#8340,1.);+#8340 = DIRECTION('',(0.,1.,0.));+#8341 = PCURVE('',#6440,#8342);+#8342 = DEFINITIONAL_REPRESENTATION('',(#8343),#8347);+#8343 = LINE('',#8344,#8345);+#8344 = CARTESIAN_POINT('',(-4.0203361122E-02,0.223473373328));+#8345 = VECTOR('',#8346,1.);+#8346 = DIRECTION('',(0.,1.));+#8347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8348 = PCURVE('',#6468,#8349);+#8349 = DEFINITIONAL_REPRESENTATION('',(#8350),#8354);+#8350 = LINE('',#8351,#8352);+#8351 = CARTESIAN_POINT('',(0.122326566098,0.1));+#8352 = VECTOR('',#8353,1.);+#8353 = DIRECTION('',(-1.,0.));+#8354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8355 = ADVANCED_FACE('',(#8356),#6524,.T.);+#8356 = FACE_BOUND('',#8357,.F.);+#8357 = EDGE_LOOP('',(#8358,#8359,#8382,#8403));+#8358 = ORIENTED_EDGE('',*,*,#6508,.F.);+#8359 = ORIENTED_EDGE('',*,*,#8360,.F.);+#8360 = EDGE_CURVE('',#8361,#6481,#8363,.T.);+#8361 = VERTEX_POINT('',#8362);+#8362 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,0.193144044696)+  );+#8363 = SURFACE_CURVE('',#8364,(#8368,#8375),.PCURVE_S1.);+#8364 = LINE('',#8365,#8366);+#8365 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,0.193144044696)+  );+#8366 = VECTOR('',#8367,1.);+#8367 = DIRECTION('',(0.,1.,0.));+#8368 = PCURVE('',#6524,#8369);+#8369 = DEFINITIONAL_REPRESENTATION('',(#8370),#8374);+#8370 = LINE('',#8371,#8372);+#8371 = CARTESIAN_POINT('',(1.2673433902E-02,0.));+#8372 = VECTOR('',#8373,1.);+#8373 = DIRECTION('',(1.,0.));+#8374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8375 = PCURVE('',#6496,#8376);+#8376 = DEFINITIONAL_REPRESENTATION('',(#8377),#8381);+#8377 = LINE('',#8378,#8379);+#8378 = CARTESIAN_POINT('',(3.744580993E-02,0.2722675596));+#8379 = VECTOR('',#8380,1.);+#8380 = DIRECTION('',(0.,1.));+#8381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8382 = ORIENTED_EDGE('',*,*,#8383,.T.);+#8383 = EDGE_CURVE('',#8361,#8285,#8384,.T.);+#8384 = SURFACE_CURVE('',#8385,(#8389,#8396),.PCURVE_S1.);+#8385 = LINE('',#8386,#8387);+#8386 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,0.193144044696)+  );+#8387 = VECTOR('',#8388,1.);+#8388 = DIRECTION('',(0.,0.,-1.));+#8389 = PCURVE('',#6524,#8390);+#8390 = DEFINITIONAL_REPRESENTATION('',(#8391),#8395);+#8391 = LINE('',#8392,#8393);+#8392 = CARTESIAN_POINT('',(1.2673433902E-02,0.));+#8393 = VECTOR('',#8394,1.);+#8394 = DIRECTION('',(0.,1.));+#8395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8396 = PCURVE('',#8323,#8397);+#8397 = DEFINITIONAL_REPRESENTATION('',(#8398),#8402);+#8398 = LINE('',#8399,#8400);+#8399 = CARTESIAN_POINT('',(0.154688826478,0.));+#8400 = VECTOR('',#8401,1.);+#8401 = DIRECTION('',(0.,-1.));+#8402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8403 = ORIENTED_EDGE('',*,*,#8284,.F.);+#8404 = ADVANCED_FACE('',(#8405),#6496,.F.);+#8405 = FACE_BOUND('',#8406,.F.);+#8406 = EDGE_LOOP('',(#8407,#8408,#8431,#8452));+#8407 = ORIENTED_EDGE('',*,*,#6480,.F.);+#8408 = ORIENTED_EDGE('',*,*,#8409,.F.);+#8409 = EDGE_CURVE('',#8410,#6453,#8412,.T.);+#8410 = VERTEX_POINT('',#8411);+#8411 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+  );+#8412 = SURFACE_CURVE('',#8413,(#8417,#8424),.PCURVE_S1.);+#8413 = LINE('',#8414,#8415);+#8414 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+  );+#8415 = VECTOR('',#8416,1.);+#8416 = DIRECTION('',(0.,1.,0.));+#8417 = PCURVE('',#6496,#8418);+#8418 = DEFINITIONAL_REPRESENTATION('',(#8419),#8423);+#8419 = LINE('',#8420,#8421);+#8420 = CARTESIAN_POINT('',(-4.2554190068E-02,0.2722675596));+#8421 = VECTOR('',#8422,1.);+#8422 = DIRECTION('',(0.,1.));+#8423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8424 = PCURVE('',#6468,#8425);+#8425 = DEFINITIONAL_REPRESENTATION('',(#8426),#8430);+#8426 = LINE('',#8427,#8428);+#8427 = CARTESIAN_POINT('',(0.122326566098,0.));+#8428 = VECTOR('',#8429,1.);+#8429 = DIRECTION('',(-1.,0.));+#8430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8431 = ORIENTED_EDGE('',*,*,#8432,.T.);+#8432 = EDGE_CURVE('',#8410,#8361,#8433,.T.);+#8433 = SURFACE_CURVE('',#8434,(#8438,#8445),.PCURVE_S1.);+#8434 = LINE('',#8435,#8436);+#8435 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+  );+#8436 = VECTOR('',#8437,1.);+#8437 = DIRECTION('',(1.,0.,0.));+#8438 = PCURVE('',#6496,#8439);+#8439 = DEFINITIONAL_REPRESENTATION('',(#8440),#8444);+#8440 = LINE('',#8441,#8442);+#8441 = CARTESIAN_POINT('',(-4.2554190068E-02,0.2722675596));+#8442 = VECTOR('',#8443,1.);+#8443 = DIRECTION('',(1.,0.));+#8444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8445 = PCURVE('',#8323,#8446);+#8446 = DEFINITIONAL_REPRESENTATION('',(#8447),#8451);+#8447 = LINE('',#8448,#8449);+#8448 = CARTESIAN_POINT('',(0.234688826476,0.));+#8449 = VECTOR('',#8450,1.);+#8450 = DIRECTION('',(-1.,0.));+#8451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8452 = ORIENTED_EDGE('',*,*,#8360,.T.);+#8453 = ADVANCED_FACE('',(#8454),#6468,.T.);+#8454 = FACE_BOUND('',#8455,.F.);+#8455 = EDGE_LOOP('',(#8456,#8457,#8458,#8479));+#8456 = ORIENTED_EDGE('',*,*,#6452,.T.);+#8457 = ORIENTED_EDGE('',*,*,#8335,.F.);+#8458 = ORIENTED_EDGE('',*,*,#8459,.F.);+#8459 = EDGE_CURVE('',#8410,#8308,#8460,.T.);+#8460 = SURFACE_CURVE('',#8461,(#8465,#8472),.PCURVE_S1.);+#8461 = LINE('',#8462,#8463);+#8462 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+  );+#8463 = VECTOR('',#8464,1.);+#8464 = DIRECTION('',(0.,0.,-1.));+#8465 = PCURVE('',#6468,#8466);+#8466 = DEFINITIONAL_REPRESENTATION('',(#8467),#8471);+#8467 = LINE('',#8468,#8469);+#8468 = CARTESIAN_POINT('',(0.122326566098,0.));+#8469 = VECTOR('',#8470,1.);+#8470 = DIRECTION('',(0.,1.));+#8471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8472 = PCURVE('',#8323,#8473);+#8473 = DEFINITIONAL_REPRESENTATION('',(#8474),#8478);+#8474 = LINE('',#8475,#8476);+#8475 = CARTESIAN_POINT('',(0.234688826476,0.));+#8476 = VECTOR('',#8477,1.);+#8477 = DIRECTION('',(0.,-1.));+#8478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8479 = ORIENTED_EDGE('',*,*,#8409,.T.);+#8480 = ADVANCED_FACE('',(#8481),#8323,.T.);+#8481 = FACE_BOUND('',#8482,.F.);+#8482 = EDGE_LOOP('',(#8483,#8484,#8485,#8486));+#8483 = ORIENTED_EDGE('',*,*,#8383,.F.);+#8484 = ORIENTED_EDGE('',*,*,#8432,.F.);+#8485 = ORIENTED_EDGE('',*,*,#8459,.T.);+#8486 = ORIENTED_EDGE('',*,*,#8307,.F.);+#8487 = ADVANCED_FACE('',(#8488),#194,.T.);+#8488 = FACE_BOUND('',#8489,.F.);+#8489 = EDGE_LOOP('',(#8490,#8520,#8541,#8542,#8543,#8544,#8545,#8546,+    #8569,#8597,#8625,#8653,#8681,#8704,#8725,#8726,#8749,#8777,#8805,+    #8833,#8861,#8884,#8905,#8906,#8929,#8957,#8985,#9013,#9041,#9064,+    #9085,#9086,#9109,#9132,#9160,#9188,#9216,#9239,#9260,#9261,#9284,+    #9307,#9335,#9363,#9391,#9414,#9435,#9436,#9459,#9482,#9510,#9538,+    #9566,#9589,#9610,#9611,#9634,#9657,#9685,#9713));+#8490 = ORIENTED_EDGE('',*,*,#8491,.F.);+#8491 = EDGE_CURVE('',#8492,#8494,#8496,.T.);+#8492 = VERTEX_POINT('',#8493);+#8493 = CARTESIAN_POINT('',(3.5,0.345943712857,9.314404469578E-02));+#8494 = VERTEX_POINT('',#8495);+#8495 = CARTESIAN_POINT('',(3.5,0.395983918053,9.314404469578E-02));+#8496 = SURFACE_CURVE('',#8497,(#8501,#8508),.PCURVE_S1.);+#8497 = LINE('',#8498,#8499);+#8498 = CARTESIAN_POINT('',(3.5,0.345943712857,9.314404469578E-02));+#8499 = VECTOR('',#8500,1.);+#8500 = DIRECTION('',(0.,1.,0.));+#8501 = PCURVE('',#194,#8502);+#8502 = DEFINITIONAL_REPRESENTATION('',(#8503),#8507);+#8503 = LINE('',#8504,#8505);+#8504 = CARTESIAN_POINT('',(0.345943712857,9.314404469578E-02));+#8505 = VECTOR('',#8506,1.);+#8506 = DIRECTION('',(1.,0.));+#8507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8508 = PCURVE('',#8509,#8514);+#8509 = PLANE('',#8510);+#8510 = AXIS2_PLACEMENT_3D('',#8511,#8512,#8513);+#8511 = CARTESIAN_POINT('',(3.081382693608,2.885692661495,+    9.314404469578E-02));+#8512 = DIRECTION('',(0.,0.,1.));+#8513 = DIRECTION('',(1.,0.,-0.));+#8514 = DEFINITIONAL_REPRESENTATION('',(#8515),#8519);+#8515 = LINE('',#8516,#8517);+#8516 = CARTESIAN_POINT('',(0.418617306392,-2.539748948638));+#8517 = VECTOR('',#8518,1.);+#8518 = DIRECTION('',(0.,1.));+#8519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8520 = ORIENTED_EDGE('',*,*,#8521,.F.);+#8521 = EDGE_CURVE('',#3235,#8492,#8522,.T.);+#8522 = SURFACE_CURVE('',#8523,(#8527,#8534),.PCURVE_S1.);+#8523 = LINE('',#8524,#8525);+#8524 = CARTESIAN_POINT('',(3.5,0.345943712857,0.));+#8525 = VECTOR('',#8526,1.);+#8526 = DIRECTION('',(0.,0.,1.));+#8527 = PCURVE('',#194,#8528);+#8528 = DEFINITIONAL_REPRESENTATION('',(#8529),#8533);+#8529 = LINE('',#8530,#8531);+#8530 = CARTESIAN_POINT('',(0.345943712857,0.));+#8531 = VECTOR('',#8532,1.);+#8532 = DIRECTION('',(0.,1.));+#8533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8534 = PCURVE('',#3273,#8535);+#8535 = DEFINITIONAL_REPRESENTATION('',(#8536),#8540);+#8536 = LINE('',#8537,#8538);+#8537 = CARTESIAN_POINT('',(8.335838955681E-02,-9.314404469578E-02));+#8538 = VECTOR('',#8539,1.);+#8539 = DIRECTION('',(0.,1.));+#8540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8541 = ORIENTED_EDGE('',*,*,#3234,.T.);+#8542 = ORIENTED_EDGE('',*,*,#261,.F.);+#8543 = ORIENTED_EDGE('',*,*,#180,.F.);+#8544 = ORIENTED_EDGE('',*,*,#6581,.T.);+#8545 = ORIENTED_EDGE('',*,*,#1570,.T.);+#8546 = ORIENTED_EDGE('',*,*,#8547,.T.);+#8547 = EDGE_CURVE('',#1543,#8548,#8550,.T.);+#8548 = VERTEX_POINT('',#8549);+#8549 = CARTESIAN_POINT('',(3.5,4.225441613226,9.314404469578E-02));+#8550 = SURFACE_CURVE('',#8551,(#8555,#8562),.PCURVE_S1.);+#8551 = LINE('',#8552,#8553);+#8552 = CARTESIAN_POINT('',(3.5,4.225441613226,0.));+#8553 = VECTOR('',#8554,1.);+#8554 = DIRECTION('',(0.,0.,1.));+#8555 = PCURVE('',#194,#8556);+#8556 = DEFINITIONAL_REPRESENTATION('',(#8557),#8561);+#8557 = LINE('',#8558,#8559);+#8558 = CARTESIAN_POINT('',(4.225441613226,0.));+#8559 = VECTOR('',#8560,1.);+#8560 = DIRECTION('',(0.,1.));+#8561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8562 = PCURVE('',#1558,#8563);+#8563 = DEFINITIONAL_REPRESENTATION('',(#8564),#8568);+#8564 = LINE('',#8565,#8566);+#8565 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#8566 = VECTOR('',#8567,1.);+#8567 = DIRECTION('',(0.,-1.));+#8568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8569 = ORIENTED_EDGE('',*,*,#8570,.F.);+#8570 = EDGE_CURVE('',#8571,#8548,#8573,.T.);+#8571 = VERTEX_POINT('',#8572);+#8572 = CARTESIAN_POINT('',(3.5,4.175983918045,9.314404469578E-02));+#8573 = SURFACE_CURVE('',#8574,(#8578,#8585),.PCURVE_S1.);+#8574 = LINE('',#8575,#8576);+#8575 = CARTESIAN_POINT('',(3.5,4.175983918045,9.314404469578E-02));+#8576 = VECTOR('',#8577,1.);+#8577 = DIRECTION('',(0.,1.,0.));+#8578 = PCURVE('',#194,#8579);+#8579 = DEFINITIONAL_REPRESENTATION('',(#8580),#8584);+#8580 = LINE('',#8581,#8582);+#8581 = CARTESIAN_POINT('',(4.175983918045,9.314404469578E-02));+#8582 = VECTOR('',#8583,1.);+#8583 = DIRECTION('',(1.,0.));+#8584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8585 = PCURVE('',#8586,#8591);+#8586 = PLANE('',#8587);+#8587 = AXIS2_PLACEMENT_3D('',#8588,#8589,#8590);+#8588 = CARTESIAN_POINT('',(3.031489382077,4.195389983861,+    9.314404469578E-02));+#8589 = DIRECTION('',(0.,0.,1.));+#8590 = DIRECTION('',(1.,0.,-0.));+#8591 = DEFINITIONAL_REPRESENTATION('',(#8592),#8596);+#8592 = LINE('',#8593,#8594);+#8593 = CARTESIAN_POINT('',(0.468510617923,-1.9406065816E-02));+#8594 = VECTOR('',#8595,1.);+#8595 = DIRECTION('',(0.,1.));+#8596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8597 = ORIENTED_EDGE('',*,*,#8598,.F.);+#8598 = EDGE_CURVE('',#8599,#8571,#8601,.T.);+#8599 = VERTEX_POINT('',#8600);+#8600 = CARTESIAN_POINT('',(3.5,4.175983918045,0.193144044696));+#8601 = SURFACE_CURVE('',#8602,(#8606,#8613),.PCURVE_S1.);+#8602 = LINE('',#8603,#8604);+#8603 = CARTESIAN_POINT('',(3.5,4.175983918045,0.193144044696));+#8604 = VECTOR('',#8605,1.);+#8605 = DIRECTION('',(0.,0.,-1.));+#8606 = PCURVE('',#194,#8607);+#8607 = DEFINITIONAL_REPRESENTATION('',(#8608),#8612);+#8608 = LINE('',#8609,#8610);+#8609 = CARTESIAN_POINT('',(4.175983918045,0.193144044696));+#8610 = VECTOR('',#8611,1.);+#8611 = DIRECTION('',(0.,-1.));+#8612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8613 = PCURVE('',#8614,#8619);+#8614 = PLANE('',#8615);+#8615 = AXIS2_PLACEMENT_3D('',#8616,#8617,#8618);+#8616 = CARTESIAN_POINT('',(3.574258671695,4.175983918045,0.193144044696+    ));+#8617 = DIRECTION('',(0.,-1.,0.));+#8618 = DIRECTION('',(-1.,0.,0.));+#8619 = DEFINITIONAL_REPRESENTATION('',(#8620),#8624);+#8620 = LINE('',#8621,#8622);+#8621 = CARTESIAN_POINT('',(7.4258671695E-02,0.));+#8622 = VECTOR('',#8623,1.);+#8623 = DIRECTION('',(0.,1.));+#8624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8625 = ORIENTED_EDGE('',*,*,#8626,.F.);+#8626 = EDGE_CURVE('',#8627,#8599,#8629,.T.);+#8627 = VERTEX_POINT('',#8628);+#8628 = CARTESIAN_POINT('',(3.5,4.095983918047,0.193144044696));+#8629 = SURFACE_CURVE('',#8630,(#8634,#8641),.PCURVE_S1.);+#8630 = LINE('',#8631,#8632);+#8631 = CARTESIAN_POINT('',(3.5,4.095983918047,0.193144044696));+#8632 = VECTOR('',#8633,1.);+#8633 = DIRECTION('',(0.,1.,0.));+#8634 = PCURVE('',#194,#8635);+#8635 = DEFINITIONAL_REPRESENTATION('',(#8636),#8640);+#8636 = LINE('',#8637,#8638);+#8637 = CARTESIAN_POINT('',(4.095983918047,0.193144044696));+#8638 = VECTOR('',#8639,1.);+#8639 = DIRECTION('',(1.,0.));+#8640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8641 = PCURVE('',#8642,#8647);+#8642 = PLANE('',#8643);+#8643 = AXIS2_PLACEMENT_3D('',#8644,#8645,#8646);+#8644 = CARTESIAN_POINT('',(2.808430401428,4.009344833768,0.193144044696+    ));+#8645 = DIRECTION('',(0.,0.,1.));+#8646 = DIRECTION('',(1.,0.,-0.));+#8647 = DEFINITIONAL_REPRESENTATION('',(#8648),#8652);+#8648 = LINE('',#8649,#8650);+#8649 = CARTESIAN_POINT('',(0.691569598572,8.6639084279E-02));+#8650 = VECTOR('',#8651,1.);+#8651 = DIRECTION('',(0.,1.));+#8652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8653 = ORIENTED_EDGE('',*,*,#8654,.T.);+#8654 = EDGE_CURVE('',#8627,#8655,#8657,.T.);+#8655 = VERTEX_POINT('',#8656);+#8656 = CARTESIAN_POINT('',(3.5,4.095983918047,9.314404469578E-02));+#8657 = SURFACE_CURVE('',#8658,(#8662,#8669),.PCURVE_S1.);+#8658 = LINE('',#8659,#8660);+#8659 = CARTESIAN_POINT('',(3.5,4.095983918047,0.193144044696));+#8660 = VECTOR('',#8661,1.);+#8661 = DIRECTION('',(0.,0.,-1.));+#8662 = PCURVE('',#194,#8663);+#8663 = DEFINITIONAL_REPRESENTATION('',(#8664),#8668);+#8664 = LINE('',#8665,#8666);+#8665 = CARTESIAN_POINT('',(4.095983918047,0.193144044696));+#8666 = VECTOR('',#8667,1.);+#8667 = DIRECTION('',(0.,-1.));+#8668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8669 = PCURVE('',#8670,#8675);+#8670 = PLANE('',#8671);+#8671 = AXIS2_PLACEMENT_3D('',#8672,#8673,#8674);+#8672 = CARTESIAN_POINT('',(3.439258671685,4.095983918047,0.193144044696+    ));+#8673 = DIRECTION('',(0.,1.,0.));+#8674 = DIRECTION('',(1.,0.,0.));+#8675 = DEFINITIONAL_REPRESENTATION('',(#8676),#8680);+#8676 = LINE('',#8677,#8678);+#8677 = CARTESIAN_POINT('',(6.0741328315E-02,0.));+#8678 = VECTOR('',#8679,1.);+#8679 = DIRECTION('',(0.,1.));+#8680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8681 = ORIENTED_EDGE('',*,*,#8682,.F.);+#8682 = EDGE_CURVE('',#8683,#8655,#8685,.T.);+#8683 = VERTEX_POINT('',#8684);+#8684 = CARTESIAN_POINT('',(3.5,4.045943712856,9.314404469578E-02));+#8685 = SURFACE_CURVE('',#8686,(#8690,#8697),.PCURVE_S1.);+#8686 = LINE('',#8687,#8688);+#8687 = CARTESIAN_POINT('',(3.5,4.045943712856,9.314404469578E-02));+#8688 = VECTOR('',#8689,1.);+#8689 = DIRECTION('',(0.,1.,0.));+#8690 = PCURVE('',#194,#8691);+#8691 = DEFINITIONAL_REPRESENTATION('',(#8692),#8696);+#8692 = LINE('',#8693,#8694);+#8693 = CARTESIAN_POINT('',(4.045943712856,9.314404469578E-02));+#8694 = VECTOR('',#8695,1.);+#8695 = DIRECTION('',(1.,0.));+#8696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8697 = PCURVE('',#8586,#8698);+#8698 = DEFINITIONAL_REPRESENTATION('',(#8699),#8703);+#8699 = LINE('',#8700,#8701);+#8700 = CARTESIAN_POINT('',(0.468510617923,-0.149446271005));+#8701 = VECTOR('',#8702,1.);+#8702 = DIRECTION('',(0.,1.));+#8703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8704 = ORIENTED_EDGE('',*,*,#8705,.F.);+#8705 = EDGE_CURVE('',#1286,#8683,#8706,.T.);+#8706 = SURFACE_CURVE('',#8707,(#8711,#8718),.PCURVE_S1.);+#8707 = LINE('',#8708,#8709);+#8708 = CARTESIAN_POINT('',(3.5,4.045943712856,0.));+#8709 = VECTOR('',#8710,1.);+#8710 = DIRECTION('',(0.,0.,1.));+#8711 = PCURVE('',#194,#8712);+#8712 = DEFINITIONAL_REPRESENTATION('',(#8713),#8717);+#8713 = LINE('',#8714,#8715);+#8714 = CARTESIAN_POINT('',(4.045943712856,0.));+#8715 = VECTOR('',#8716,1.);+#8716 = DIRECTION('',(0.,1.));+#8717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8718 = PCURVE('',#1324,#8719);+#8719 = DEFINITIONAL_REPRESENTATION('',(#8720),#8724);+#8720 = LINE('',#8721,#8722);+#8721 = CARTESIAN_POINT('',(8.335838955724E-02,-9.314404469578E-02));+#8722 = VECTOR('',#8723,1.);+#8723 = DIRECTION('',(0.,1.));+#8724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8725 = ORIENTED_EDGE('',*,*,#1285,.T.);+#8726 = ORIENTED_EDGE('',*,*,#8727,.T.);+#8727 = EDGE_CURVE('',#1258,#8728,#8730,.T.);+#8728 = VERTEX_POINT('',#8729);+#8729 = CARTESIAN_POINT('',(3.5,3.475441613231,9.314404469578E-02));+#8730 = SURFACE_CURVE('',#8731,(#8735,#8742),.PCURVE_S1.);+#8731 = LINE('',#8732,#8733);+#8732 = CARTESIAN_POINT('',(3.5,3.475441613231,0.));+#8733 = VECTOR('',#8734,1.);+#8734 = DIRECTION('',(0.,0.,1.));+#8735 = PCURVE('',#194,#8736);+#8736 = DEFINITIONAL_REPRESENTATION('',(#8737),#8741);+#8737 = LINE('',#8738,#8739);+#8738 = CARTESIAN_POINT('',(3.475441613231,0.));+#8739 = VECTOR('',#8740,1.);+#8740 = DIRECTION('',(0.,1.));+#8741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8742 = PCURVE('',#1273,#8743);+#8743 = DEFINITIONAL_REPRESENTATION('',(#8744),#8748);+#8744 = LINE('',#8745,#8746);+#8745 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#8746 = VECTOR('',#8747,1.);+#8747 = DIRECTION('',(0.,1.));+#8748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8749 = ORIENTED_EDGE('',*,*,#8750,.F.);+#8750 = EDGE_CURVE('',#8751,#8728,#8753,.T.);+#8751 = VERTEX_POINT('',#8752);+#8752 = CARTESIAN_POINT('',(3.5,3.425983916501,9.314404469578E-02));+#8753 = SURFACE_CURVE('',#8754,(#8758,#8765),.PCURVE_S1.);+#8754 = LINE('',#8755,#8756);+#8755 = CARTESIAN_POINT('',(3.5,3.425983916501,9.314404469578E-02));+#8756 = VECTOR('',#8757,1.);+#8757 = DIRECTION('',(0.,1.,0.));+#8758 = PCURVE('',#194,#8759);+#8759 = DEFINITIONAL_REPRESENTATION('',(#8760),#8764);+#8760 = LINE('',#8761,#8762);+#8761 = CARTESIAN_POINT('',(3.425983916501,9.314404469578E-02));+#8762 = VECTOR('',#8763,1.);+#8763 = DIRECTION('',(1.,0.));+#8764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8765 = PCURVE('',#8766,#8771);+#8766 = PLANE('',#8767);+#8767 = AXIS2_PLACEMENT_3D('',#8768,#8769,#8770);+#8768 = CARTESIAN_POINT('',(3.081382693608,3.385692661495,+    9.314404469578E-02));+#8769 = DIRECTION('',(0.,0.,1.));+#8770 = DIRECTION('',(1.,0.,-0.));+#8771 = DEFINITIONAL_REPRESENTATION('',(#8772),#8776);+#8772 = LINE('',#8773,#8774);+#8773 = CARTESIAN_POINT('',(0.418617306392,4.0291255006E-02));+#8774 = VECTOR('',#8775,1.);+#8775 = DIRECTION('',(0.,1.));+#8776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8777 = ORIENTED_EDGE('',*,*,#8778,.F.);+#8778 = EDGE_CURVE('',#8779,#8751,#8781,.T.);+#8779 = VERTEX_POINT('',#8780);+#8780 = CARTESIAN_POINT('',(3.5,3.425983916501,0.193144044696));+#8781 = SURFACE_CURVE('',#8782,(#8786,#8793),.PCURVE_S1.);+#8782 = LINE('',#8783,#8784);+#8783 = CARTESIAN_POINT('',(3.5,3.425983916501,0.193144044696));+#8784 = VECTOR('',#8785,1.);+#8785 = DIRECTION('',(0.,0.,-1.));+#8786 = PCURVE('',#194,#8787);+#8787 = DEFINITIONAL_REPRESENTATION('',(#8788),#8792);+#8788 = LINE('',#8789,#8790);+#8789 = CARTESIAN_POINT('',(3.425983916501,0.193144044696));+#8790 = VECTOR('',#8791,1.);+#8791 = DIRECTION('',(0.,-1.));+#8792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8793 = PCURVE('',#8794,#8799);+#8794 = PLANE('',#8795);+#8795 = AXIS2_PLACEMENT_3D('',#8796,#8797,#8798);+#8796 = CARTESIAN_POINT('',(3.574258675005,3.425983916501,0.193144044696+    ));+#8797 = DIRECTION('',(0.,-1.,0.));+#8798 = DIRECTION('',(-1.,0.,0.));+#8799 = DEFINITIONAL_REPRESENTATION('',(#8800),#8804);+#8800 = LINE('',#8801,#8802);+#8801 = CARTESIAN_POINT('',(7.4258675005E-02,0.));+#8802 = VECTOR('',#8803,1.);+#8803 = DIRECTION('',(0.,1.));+#8804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8805 = ORIENTED_EDGE('',*,*,#8806,.F.);+#8806 = EDGE_CURVE('',#8807,#8779,#8809,.T.);+#8807 = VERTEX_POINT('',#8808);+#8808 = CARTESIAN_POINT('',(3.5,3.345983916503,0.193144044696));+#8809 = SURFACE_CURVE('',#8810,(#8814,#8821),.PCURVE_S1.);+#8810 = LINE('',#8811,#8812);+#8811 = CARTESIAN_POINT('',(3.5,3.345983916503,0.193144044696));+#8812 = VECTOR('',#8813,1.);+#8813 = DIRECTION('',(0.,1.,0.));+#8814 = PCURVE('',#194,#8815);+#8815 = DEFINITIONAL_REPRESENTATION('',(#8816),#8820);+#8816 = LINE('',#8817,#8818);+#8817 = CARTESIAN_POINT('',(3.345983916503,0.193144044696));+#8818 = VECTOR('',#8819,1.);+#8819 = DIRECTION('',(1.,0.));+#8820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8821 = PCURVE('',#8822,#8827);+#8822 = PLANE('',#8823);+#8823 = AXIS2_PLACEMENT_3D('',#8824,#8825,#8826);+#8824 = CARTESIAN_POINT('',(2.845614862582,3.353072849675,0.193144044696+    ));+#8825 = DIRECTION('',(0.,0.,1.));+#8826 = DIRECTION('',(1.,0.,-0.));+#8827 = DEFINITIONAL_REPRESENTATION('',(#8828),#8832);+#8828 = LINE('',#8829,#8830);+#8829 = CARTESIAN_POINT('',(0.654385137418,-7.088933172E-03));+#8830 = VECTOR('',#8831,1.);+#8831 = DIRECTION('',(0.,1.));+#8832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8833 = ORIENTED_EDGE('',*,*,#8834,.T.);+#8834 = EDGE_CURVE('',#8807,#8835,#8837,.T.);+#8835 = VERTEX_POINT('',#8836);+#8836 = CARTESIAN_POINT('',(3.5,3.345983916503,9.314404469578E-02));+#8837 = SURFACE_CURVE('',#8838,(#8842,#8849),.PCURVE_S1.);+#8838 = LINE('',#8839,#8840);+#8839 = CARTESIAN_POINT('',(3.5,3.345983916503,0.193144044696));+#8840 = VECTOR('',#8841,1.);+#8841 = DIRECTION('',(0.,0.,-1.));+#8842 = PCURVE('',#194,#8843);+#8843 = DEFINITIONAL_REPRESENTATION('',(#8844),#8848);+#8844 = LINE('',#8845,#8846);+#8845 = CARTESIAN_POINT('',(3.345983916503,0.193144044696));+#8846 = VECTOR('',#8847,1.);+#8847 = DIRECTION('',(0.,-1.));+#8848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8849 = PCURVE('',#8850,#8855);+#8850 = PLANE('',#8851);+#8851 = AXIS2_PLACEMENT_3D('',#8852,#8853,#8854);+#8852 = CARTESIAN_POINT('',(3.439258674996,3.345983916503,0.193144044696+    ));+#8853 = DIRECTION('',(0.,1.,0.));+#8854 = DIRECTION('',(1.,0.,0.));+#8855 = DEFINITIONAL_REPRESENTATION('',(#8856),#8860);+#8856 = LINE('',#8857,#8858);+#8857 = CARTESIAN_POINT('',(6.0741325004E-02,0.));+#8858 = VECTOR('',#8859,1.);+#8859 = DIRECTION('',(0.,1.));+#8860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8861 = ORIENTED_EDGE('',*,*,#8862,.F.);+#8862 = EDGE_CURVE('',#8863,#8835,#8865,.T.);+#8863 = VERTEX_POINT('',#8864);+#8864 = CARTESIAN_POINT('',(3.5,3.295943709768,9.314404469578E-02));+#8865 = SURFACE_CURVE('',#8866,(#8870,#8877),.PCURVE_S1.);+#8866 = LINE('',#8867,#8868);+#8867 = CARTESIAN_POINT('',(3.5,3.295943709768,9.314404469578E-02));+#8868 = VECTOR('',#8869,1.);+#8869 = DIRECTION('',(0.,1.,0.));+#8870 = PCURVE('',#194,#8871);+#8871 = DEFINITIONAL_REPRESENTATION('',(#8872),#8876);+#8872 = LINE('',#8873,#8874);+#8873 = CARTESIAN_POINT('',(3.295943709768,9.314404469578E-02));+#8874 = VECTOR('',#8875,1.);+#8875 = DIRECTION('',(1.,0.));+#8876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8877 = PCURVE('',#8766,#8878);+#8878 = DEFINITIONAL_REPRESENTATION('',(#8879),#8883);+#8879 = LINE('',#8880,#8881);+#8880 = CARTESIAN_POINT('',(0.418617306392,-8.9748951727E-02));+#8881 = VECTOR('',#8882,1.);+#8882 = DIRECTION('',(0.,1.));+#8883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8884 = ORIENTED_EDGE('',*,*,#8885,.F.);+#8885 = EDGE_CURVE('',#1118,#8863,#8886,.T.);+#8886 = SURFACE_CURVE('',#8887,(#8891,#8898),.PCURVE_S1.);+#8887 = LINE('',#8888,#8889);+#8888 = CARTESIAN_POINT('',(3.5,3.295943709768,0.));+#8889 = VECTOR('',#8890,1.);+#8890 = DIRECTION('',(0.,0.,1.));+#8891 = PCURVE('',#194,#8892);+#8892 = DEFINITIONAL_REPRESENTATION('',(#8893),#8897);+#8893 = LINE('',#8894,#8895);+#8894 = CARTESIAN_POINT('',(3.295943709768,0.));+#8895 = VECTOR('',#8896,1.);+#8896 = DIRECTION('',(0.,1.));+#8897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8898 = PCURVE('',#1156,#8899);+#8899 = DEFINITIONAL_REPRESENTATION('',(#8900),#8904);+#8900 = LINE('',#8901,#8902);+#8901 = CARTESIAN_POINT('',(8.335838225449E-02,-9.314404469578E-02));+#8902 = VECTOR('',#8903,1.);+#8903 = DIRECTION('',(0.,1.));+#8904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8905 = ORIENTED_EDGE('',*,*,#1117,.T.);+#8906 = ORIENTED_EDGE('',*,*,#8907,.T.);+#8907 = EDGE_CURVE('',#1090,#8908,#8910,.T.);+#8908 = VERTEX_POINT('',#8909);+#8909 = CARTESIAN_POINT('',(3.5,2.975441613229,9.314404469578E-02));+#8910 = SURFACE_CURVE('',#8911,(#8915,#8922),.PCURVE_S1.);+#8911 = LINE('',#8912,#8913);+#8912 = CARTESIAN_POINT('',(3.5,2.975441613229,0.));+#8913 = VECTOR('',#8914,1.);+#8914 = DIRECTION('',(0.,0.,1.));+#8915 = PCURVE('',#194,#8916);+#8916 = DEFINITIONAL_REPRESENTATION('',(#8917),#8921);+#8917 = LINE('',#8918,#8919);+#8918 = CARTESIAN_POINT('',(2.975441613229,0.));+#8919 = VECTOR('',#8920,1.);+#8920 = DIRECTION('',(0.,1.));+#8921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8922 = PCURVE('',#1105,#8923);+#8923 = DEFINITIONAL_REPRESENTATION('',(#8924),#8928);+#8924 = LINE('',#8925,#8926);+#8925 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#8926 = VECTOR('',#8927,1.);+#8927 = DIRECTION('',(0.,1.));+#8928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8929 = ORIENTED_EDGE('',*,*,#8930,.F.);+#8930 = EDGE_CURVE('',#8931,#8908,#8933,.T.);+#8931 = VERTEX_POINT('',#8932);+#8932 = CARTESIAN_POINT('',(3.5,2.925983916503,9.314404469578E-02));+#8933 = SURFACE_CURVE('',#8934,(#8938,#8945),.PCURVE_S1.);+#8934 = LINE('',#8935,#8936);+#8935 = CARTESIAN_POINT('',(3.5,2.925983916503,9.314404469578E-02));+#8936 = VECTOR('',#8937,1.);+#8937 = DIRECTION('',(0.,1.,0.));+#8938 = PCURVE('',#194,#8939);+#8939 = DEFINITIONAL_REPRESENTATION('',(#8940),#8944);+#8940 = LINE('',#8941,#8942);+#8941 = CARTESIAN_POINT('',(2.925983916503,9.314404469578E-02));+#8942 = VECTOR('',#8943,1.);+#8943 = DIRECTION('',(1.,0.));+#8944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8945 = PCURVE('',#8946,#8951);+#8946 = PLANE('',#8947);+#8947 = AXIS2_PLACEMENT_3D('',#8948,#8949,#8950);+#8948 = CARTESIAN_POINT('',(3.081382693608,2.885692661495,+    9.314404469578E-02));+#8949 = DIRECTION('',(0.,0.,1.));+#8950 = DIRECTION('',(1.,0.,-0.));+#8951 = DEFINITIONAL_REPRESENTATION('',(#8952),#8956);+#8952 = LINE('',#8953,#8954);+#8953 = CARTESIAN_POINT('',(0.418617306392,4.0291255008E-02));+#8954 = VECTOR('',#8955,1.);+#8955 = DIRECTION('',(0.,1.));+#8956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8957 = ORIENTED_EDGE('',*,*,#8958,.F.);+#8958 = EDGE_CURVE('',#8959,#8931,#8961,.T.);+#8959 = VERTEX_POINT('',#8960);+#8960 = CARTESIAN_POINT('',(3.5,2.925983916503,0.193144044696));+#8961 = SURFACE_CURVE('',#8962,(#8966,#8973),.PCURVE_S1.);+#8962 = LINE('',#8963,#8964);+#8963 = CARTESIAN_POINT('',(3.5,2.925983916503,0.193144044696));+#8964 = VECTOR('',#8965,1.);+#8965 = DIRECTION('',(0.,0.,-1.));+#8966 = PCURVE('',#194,#8967);+#8967 = DEFINITIONAL_REPRESENTATION('',(#8968),#8972);+#8968 = LINE('',#8969,#8970);+#8969 = CARTESIAN_POINT('',(2.925983916503,0.193144044696));+#8970 = VECTOR('',#8971,1.);+#8971 = DIRECTION('',(0.,-1.));+#8972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8973 = PCURVE('',#8974,#8979);+#8974 = PLANE('',#8975);+#8975 = AXIS2_PLACEMENT_3D('',#8976,#8977,#8978);+#8976 = CARTESIAN_POINT('',(3.574258675005,2.925983916503,0.193144044696+    ));+#8977 = DIRECTION('',(0.,-1.,0.));+#8978 = DIRECTION('',(-1.,0.,0.));+#8979 = DEFINITIONAL_REPRESENTATION('',(#8980),#8984);+#8980 = LINE('',#8981,#8982);+#8981 = CARTESIAN_POINT('',(7.4258675005E-02,0.));+#8982 = VECTOR('',#8983,1.);+#8983 = DIRECTION('',(0.,1.));+#8984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#8985 = ORIENTED_EDGE('',*,*,#8986,.F.);+#8986 = EDGE_CURVE('',#8987,#8959,#8989,.T.);+#8987 = VERTEX_POINT('',#8988);+#8988 = CARTESIAN_POINT('',(3.5,2.845983916501,0.193144044696));+#8989 = SURFACE_CURVE('',#8990,(#8994,#9001),.PCURVE_S1.);+#8990 = LINE('',#8991,#8992);+#8991 = CARTESIAN_POINT('',(3.5,2.845983916501,0.193144044696));+#8992 = VECTOR('',#8993,1.);+#8993 = DIRECTION('',(0.,1.,0.));+#8994 = PCURVE('',#194,#8995);+#8995 = DEFINITIONAL_REPRESENTATION('',(#8996),#9000);+#8996 = LINE('',#8997,#8998);+#8997 = CARTESIAN_POINT('',(2.845983916501,0.193144044696));+#8998 = VECTOR('',#8999,1.);+#8999 = DIRECTION('',(1.,0.));+#9000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9001 = PCURVE('',#9002,#9007);+#9002 = PLANE('',#9003);+#9003 = AXIS2_PLACEMENT_3D('',#9004,#9005,#9006);+#9004 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+    ));+#9005 = DIRECTION('',(0.,0.,1.));+#9006 = DIRECTION('',(1.,0.,-0.));+#9007 = DEFINITIONAL_REPRESENTATION('',(#9008),#9012);+#9008 = LINE('',#9009,#9010);+#9009 = CARTESIAN_POINT('',(0.710903945544,1.118516806053));+#9010 = VECTOR('',#9011,1.);+#9011 = DIRECTION('',(0.,1.));+#9012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9013 = ORIENTED_EDGE('',*,*,#9014,.T.);+#9014 = EDGE_CURVE('',#8987,#9015,#9017,.T.);+#9015 = VERTEX_POINT('',#9016);+#9016 = CARTESIAN_POINT('',(3.5,2.845983916501,9.314404469578E-02));+#9017 = SURFACE_CURVE('',#9018,(#9022,#9029),.PCURVE_S1.);+#9018 = LINE('',#9019,#9020);+#9019 = CARTESIAN_POINT('',(3.5,2.845983916501,0.193144044696));+#9020 = VECTOR('',#9021,1.);+#9021 = DIRECTION('',(0.,0.,-1.));+#9022 = PCURVE('',#194,#9023);+#9023 = DEFINITIONAL_REPRESENTATION('',(#9024),#9028);+#9024 = LINE('',#9025,#9026);+#9025 = CARTESIAN_POINT('',(2.845983916501,0.193144044696));+#9026 = VECTOR('',#9027,1.);+#9027 = DIRECTION('',(0.,-1.));+#9028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9029 = PCURVE('',#9030,#9035);+#9030 = PLANE('',#9031);+#9031 = AXIS2_PLACEMENT_3D('',#9032,#9033,#9034);+#9032 = CARTESIAN_POINT('',(3.439258674996,2.845983916501,0.193144044696+    ));+#9033 = DIRECTION('',(0.,1.,0.));+#9034 = DIRECTION('',(1.,0.,0.));+#9035 = DEFINITIONAL_REPRESENTATION('',(#9036),#9040);+#9036 = LINE('',#9037,#9038);+#9037 = CARTESIAN_POINT('',(6.0741325004E-02,0.));+#9038 = VECTOR('',#9039,1.);+#9039 = DIRECTION('',(0.,1.));+#9040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9041 = ORIENTED_EDGE('',*,*,#9042,.F.);+#9042 = EDGE_CURVE('',#9043,#9015,#9045,.T.);+#9043 = VERTEX_POINT('',#9044);+#9044 = CARTESIAN_POINT('',(3.5,2.795943709766,9.314404469578E-02));+#9045 = SURFACE_CURVE('',#9046,(#9050,#9057),.PCURVE_S1.);+#9046 = LINE('',#9047,#9048);+#9047 = CARTESIAN_POINT('',(3.5,2.795943709766,9.314404469578E-02));+#9048 = VECTOR('',#9049,1.);+#9049 = DIRECTION('',(0.,1.,0.));+#9050 = PCURVE('',#194,#9051);+#9051 = DEFINITIONAL_REPRESENTATION('',(#9052),#9056);+#9052 = LINE('',#9053,#9054);+#9053 = CARTESIAN_POINT('',(2.795943709766,9.314404469578E-02));+#9054 = VECTOR('',#9055,1.);+#9055 = DIRECTION('',(1.,0.));+#9056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9057 = PCURVE('',#8946,#9058);+#9058 = DEFINITIONAL_REPRESENTATION('',(#9059),#9063);+#9059 = LINE('',#9060,#9061);+#9060 = CARTESIAN_POINT('',(0.418617306392,-8.9748951729E-02));+#9061 = VECTOR('',#9062,1.);+#9062 = DIRECTION('',(0.,1.));+#9063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9064 = ORIENTED_EDGE('',*,*,#9065,.F.);+#9065 = EDGE_CURVE('',#3576,#9043,#9066,.T.);+#9066 = SURFACE_CURVE('',#9067,(#9071,#9078),.PCURVE_S1.);+#9067 = LINE('',#9068,#9069);+#9068 = CARTESIAN_POINT('',(3.5,2.795943709766,0.));+#9069 = VECTOR('',#9070,1.);+#9070 = DIRECTION('',(0.,0.,1.));+#9071 = PCURVE('',#194,#9072);+#9072 = DEFINITIONAL_REPRESENTATION('',(#9073),#9077);+#9073 = LINE('',#9074,#9075);+#9074 = CARTESIAN_POINT('',(2.795943709766,0.));+#9075 = VECTOR('',#9076,1.);+#9076 = DIRECTION('',(0.,1.));+#9077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9078 = PCURVE('',#3614,#9079);+#9079 = DEFINITIONAL_REPRESENTATION('',(#9080),#9084);+#9080 = LINE('',#9081,#9082);+#9081 = CARTESIAN_POINT('',(8.335838225068E-02,-9.314404469578E-02));+#9082 = VECTOR('',#9083,1.);+#9083 = DIRECTION('',(0.,1.));+#9084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9085 = ORIENTED_EDGE('',*,*,#3575,.T.);+#9086 = ORIENTED_EDGE('',*,*,#9087,.T.);+#9087 = EDGE_CURVE('',#3548,#9088,#9090,.T.);+#9088 = VERTEX_POINT('',#9089);+#9089 = CARTESIAN_POINT('',(3.5,2.025441610143,9.314404469578E-02));+#9090 = SURFACE_CURVE('',#9091,(#9095,#9102),.PCURVE_S1.);+#9091 = LINE('',#9092,#9093);+#9092 = CARTESIAN_POINT('',(3.5,2.025441610143,0.));+#9093 = VECTOR('',#9094,1.);+#9094 = DIRECTION('',(-1.430330445603E-14,0.,1.));+#9095 = PCURVE('',#194,#9096);+#9096 = DEFINITIONAL_REPRESENTATION('',(#9097),#9101);+#9097 = LINE('',#9098,#9099);+#9098 = CARTESIAN_POINT('',(2.025441610143,0.));+#9099 = VECTOR('',#9100,1.);+#9100 = DIRECTION('',(0.,1.));+#9101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9102 = PCURVE('',#3563,#9103);+#9103 = DEFINITIONAL_REPRESENTATION('',(#9104),#9108);+#9104 = LINE('',#9105,#9106);+#9105 = CARTESIAN_POINT('',(-5.936554680098E-04,-9.314404469578E-02));+#9106 = VECTOR('',#9107,1.);+#9107 = DIRECTION('',(1.296141334415E-14,1.));+#9108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9109 = ORIENTED_EDGE('',*,*,#9110,.F.);+#9110 = EDGE_CURVE('',#9111,#9088,#9113,.T.);+#9111 = VERTEX_POINT('',#9112);+#9112 = CARTESIAN_POINT('',(3.5,1.975983918052,9.314404469578E-02));+#9113 = SURFACE_CURVE('',#9114,(#9118,#9125),.PCURVE_S1.);+#9114 = LINE('',#9115,#9116);+#9115 = CARTESIAN_POINT('',(3.5,1.975983918052,9.314404469578E-02));+#9116 = VECTOR('',#9117,1.);+#9117 = DIRECTION('',(0.,1.,0.));+#9118 = PCURVE('',#194,#9119);+#9119 = DEFINITIONAL_REPRESENTATION('',(#9120),#9124);+#9120 = LINE('',#9121,#9122);+#9121 = CARTESIAN_POINT('',(1.975983918052,9.314404469578E-02));+#9122 = VECTOR('',#9123,1.);+#9123 = DIRECTION('',(1.,0.));+#9124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9125 = PCURVE('',#8509,#9126);+#9126 = DEFINITIONAL_REPRESENTATION('',(#9127),#9131);+#9127 = LINE('',#9128,#9129);+#9128 = CARTESIAN_POINT('',(0.418617306392,-0.909708743443));+#9129 = VECTOR('',#9130,1.);+#9130 = DIRECTION('',(0.,1.));+#9131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9132 = ORIENTED_EDGE('',*,*,#9133,.F.);+#9133 = EDGE_CURVE('',#9134,#9111,#9136,.T.);+#9134 = VERTEX_POINT('',#9135);+#9135 = CARTESIAN_POINT('',(3.5,1.975983918052,0.193144044696));+#9136 = SURFACE_CURVE('',#9137,(#9141,#9148),.PCURVE_S1.);+#9137 = LINE('',#9138,#9139);+#9138 = CARTESIAN_POINT('',(3.5,1.975983918052,0.193144044696));+#9139 = VECTOR('',#9140,1.);+#9140 = DIRECTION('',(0.,0.,-1.));+#9141 = PCURVE('',#194,#9142);+#9142 = DEFINITIONAL_REPRESENTATION('',(#9143),#9147);+#9143 = LINE('',#9144,#9145);+#9144 = CARTESIAN_POINT('',(1.975983918052,0.193144044696));+#9145 = VECTOR('',#9146,1.);+#9146 = DIRECTION('',(0.,-1.));+#9147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9148 = PCURVE('',#9149,#9154);+#9149 = PLANE('',#9150);+#9150 = AXIS2_PLACEMENT_3D('',#9151,#9152,#9153);+#9151 = CARTESIAN_POINT('',(3.574258671713,1.975983918052,0.193144044696+    ));+#9152 = DIRECTION('',(0.,-1.,0.));+#9153 = DIRECTION('',(-1.,0.,0.));+#9154 = DEFINITIONAL_REPRESENTATION('',(#9155),#9159);+#9155 = LINE('',#9156,#9157);+#9156 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9157 = VECTOR('',#9158,1.);+#9158 = DIRECTION('',(0.,1.));+#9159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9160 = ORIENTED_EDGE('',*,*,#9161,.F.);+#9161 = EDGE_CURVE('',#9162,#9134,#9164,.T.);+#9162 = VERTEX_POINT('',#9163);+#9163 = CARTESIAN_POINT('',(3.5,1.895983918053,0.193144044696));+#9164 = SURFACE_CURVE('',#9165,(#9169,#9176),.PCURVE_S1.);+#9165 = LINE('',#9166,#9167);+#9166 = CARTESIAN_POINT('',(3.5,1.895983918053,0.193144044696));+#9167 = VECTOR('',#9168,1.);+#9168 = DIRECTION('',(0.,1.,0.));+#9169 = PCURVE('',#194,#9170);+#9170 = DEFINITIONAL_REPRESENTATION('',(#9171),#9175);+#9171 = LINE('',#9172,#9173);+#9172 = CARTESIAN_POINT('',(1.895983918053,0.193144044696));+#9173 = VECTOR('',#9174,1.);+#9174 = DIRECTION('',(1.,0.));+#9175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9176 = PCURVE('',#9177,#9182);+#9177 = PLANE('',#9178);+#9178 = AXIS2_PLACEMENT_3D('',#9179,#9180,#9181);+#9179 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+    ));+#9180 = DIRECTION('',(0.,0.,1.));+#9181 = DIRECTION('',(1.,0.,-0.));+#9182 = DEFINITIONAL_REPRESENTATION('',(#9183),#9187);+#9183 = LINE('',#9184,#9185);+#9184 = CARTESIAN_POINT('',(0.710903945544,0.168516807605));+#9185 = VECTOR('',#9186,1.);+#9186 = DIRECTION('',(0.,1.));+#9187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9188 = ORIENTED_EDGE('',*,*,#9189,.T.);+#9189 = EDGE_CURVE('',#9162,#9190,#9192,.T.);+#9190 = VERTEX_POINT('',#9191);+#9191 = CARTESIAN_POINT('',(3.5,1.895983918053,9.314404469578E-02));+#9192 = SURFACE_CURVE('',#9193,(#9197,#9204),.PCURVE_S1.);+#9193 = LINE('',#9194,#9195);+#9194 = CARTESIAN_POINT('',(3.5,1.895983918053,0.193144044696));+#9195 = VECTOR('',#9196,1.);+#9196 = DIRECTION('',(0.,0.,-1.));+#9197 = PCURVE('',#194,#9198);+#9198 = DEFINITIONAL_REPRESENTATION('',(#9199),#9203);+#9199 = LINE('',#9200,#9201);+#9200 = CARTESIAN_POINT('',(1.895983918053,0.193144044696));+#9201 = VECTOR('',#9202,1.);+#9202 = DIRECTION('',(0.,-1.));+#9203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9204 = PCURVE('',#9205,#9210);+#9205 = PLANE('',#9206);+#9206 = AXIS2_PLACEMENT_3D('',#9207,#9208,#9209);+#9207 = CARTESIAN_POINT('',(3.439258671704,1.895983918053,0.193144044696+    ));+#9208 = DIRECTION('',(0.,1.,0.));+#9209 = DIRECTION('',(1.,0.,0.));+#9210 = DEFINITIONAL_REPRESENTATION('',(#9211),#9215);+#9211 = LINE('',#9212,#9213);+#9212 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9213 = VECTOR('',#9214,1.);+#9214 = DIRECTION('',(0.,1.));+#9215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9216 = ORIENTED_EDGE('',*,*,#9217,.F.);+#9217 = EDGE_CURVE('',#9218,#9190,#9220,.T.);+#9218 = VERTEX_POINT('',#9219);+#9219 = CARTESIAN_POINT('',(3.5,1.845943709768,9.314404469578E-02));+#9220 = SURFACE_CURVE('',#9221,(#9225,#9232),.PCURVE_S1.);+#9221 = LINE('',#9222,#9223);+#9222 = CARTESIAN_POINT('',(3.5,1.845943709768,9.314404469578E-02));+#9223 = VECTOR('',#9224,1.);+#9224 = DIRECTION('',(0.,1.,0.));+#9225 = PCURVE('',#194,#9226);+#9226 = DEFINITIONAL_REPRESENTATION('',(#9227),#9231);+#9227 = LINE('',#9228,#9229);+#9228 = CARTESIAN_POINT('',(1.845943709768,9.314404469578E-02));+#9229 = VECTOR('',#9230,1.);+#9230 = DIRECTION('',(1.,0.));+#9231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9232 = PCURVE('',#8509,#9233);+#9233 = DEFINITIONAL_REPRESENTATION('',(#9234),#9238);+#9234 = LINE('',#9235,#9236);+#9235 = CARTESIAN_POINT('',(0.418617306392,-1.039748951727));+#9236 = VECTOR('',#9237,1.);+#9237 = DIRECTION('',(0.,1.));+#9238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9239 = ORIENTED_EDGE('',*,*,#9240,.F.);+#9240 = EDGE_CURVE('',#3691,#9218,#9241,.T.);+#9241 = SURFACE_CURVE('',#9242,(#9246,#9253),.PCURVE_S1.);+#9242 = LINE('',#9243,#9244);+#9243 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#9244 = VECTOR('',#9245,1.);+#9245 = DIRECTION('',(0.,0.,1.));+#9246 = PCURVE('',#194,#9247);+#9247 = DEFINITIONAL_REPRESENTATION('',(#9248),#9252);+#9248 = LINE('',#9249,#9250);+#9249 = CARTESIAN_POINT('',(1.845943709768,0.));+#9250 = VECTOR('',#9251,1.);+#9251 = DIRECTION('',(0.,1.));+#9252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9253 = PCURVE('',#3729,#9254);+#9254 = DEFINITIONAL_REPRESENTATION('',(#9255),#9259);+#9255 = LINE('',#9256,#9257);+#9256 = CARTESIAN_POINT('',(-5.9365546801E-04,9.314404469578E-02));+#9257 = VECTOR('',#9258,1.);+#9258 = DIRECTION('',(0.,-1.));+#9259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9260 = ORIENTED_EDGE('',*,*,#3690,.T.);+#9261 = ORIENTED_EDGE('',*,*,#9262,.T.);+#9262 = EDGE_CURVE('',#3658,#9263,#9265,.T.);+#9263 = VERTEX_POINT('',#9264);+#9264 = CARTESIAN_POINT('',(3.5,1.52544161323,9.314404469578E-02));+#9265 = SURFACE_CURVE('',#9266,(#9270,#9277),.PCURVE_S1.);+#9266 = LINE('',#9267,#9268);+#9267 = CARTESIAN_POINT('',(3.5,1.52544161323,0.));+#9268 = VECTOR('',#9269,1.);+#9269 = DIRECTION('',(0.,0.,1.));+#9270 = PCURVE('',#194,#9271);+#9271 = DEFINITIONAL_REPRESENTATION('',(#9272),#9276);+#9272 = LINE('',#9273,#9274);+#9273 = CARTESIAN_POINT('',(1.52544161323,0.));+#9274 = VECTOR('',#9275,1.);+#9275 = DIRECTION('',(0.,1.));+#9276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9277 = PCURVE('',#3678,#9278);+#9278 = DEFINITIONAL_REPRESENTATION('',(#9279),#9283);+#9279 = LINE('',#9280,#9281);+#9280 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#9281 = VECTOR('',#9282,1.);+#9282 = DIRECTION('',(0.,-1.));+#9283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9284 = ORIENTED_EDGE('',*,*,#9285,.F.);+#9285 = EDGE_CURVE('',#9286,#9263,#9288,.T.);+#9286 = VERTEX_POINT('',#9287);+#9287 = CARTESIAN_POINT('',(3.5,1.47598391805,9.314404469578E-02));+#9288 = SURFACE_CURVE('',#9289,(#9293,#9300),.PCURVE_S1.);+#9289 = LINE('',#9290,#9291);+#9290 = CARTESIAN_POINT('',(3.5,1.47598391805,9.314404469578E-02));+#9291 = VECTOR('',#9292,1.);+#9292 = DIRECTION('',(0.,1.,0.));+#9293 = PCURVE('',#194,#9294);+#9294 = DEFINITIONAL_REPRESENTATION('',(#9295),#9299);+#9295 = LINE('',#9296,#9297);+#9296 = CARTESIAN_POINT('',(1.47598391805,9.314404469578E-02));+#9297 = VECTOR('',#9298,1.);+#9298 = DIRECTION('',(1.,0.));+#9299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9300 = PCURVE('',#8509,#9301);+#9301 = DEFINITIONAL_REPRESENTATION('',(#9302),#9306);+#9302 = LINE('',#9303,#9304);+#9303 = CARTESIAN_POINT('',(0.418617306392,-1.409708743445));+#9304 = VECTOR('',#9305,1.);+#9305 = DIRECTION('',(0.,1.));+#9306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9307 = ORIENTED_EDGE('',*,*,#9308,.F.);+#9308 = EDGE_CURVE('',#9309,#9286,#9311,.T.);+#9309 = VERTEX_POINT('',#9310);+#9310 = CARTESIAN_POINT('',(3.5,1.47598391805,0.193144044696));+#9311 = SURFACE_CURVE('',#9312,(#9316,#9323),.PCURVE_S1.);+#9312 = LINE('',#9313,#9314);+#9313 = CARTESIAN_POINT('',(3.5,1.47598391805,0.193144044696));+#9314 = VECTOR('',#9315,1.);+#9315 = DIRECTION('',(0.,0.,-1.));+#9316 = PCURVE('',#194,#9317);+#9317 = DEFINITIONAL_REPRESENTATION('',(#9318),#9322);+#9318 = LINE('',#9319,#9320);+#9319 = CARTESIAN_POINT('',(1.47598391805,0.193144044696));+#9320 = VECTOR('',#9321,1.);+#9321 = DIRECTION('',(0.,-1.));+#9322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9323 = PCURVE('',#9324,#9329);+#9324 = PLANE('',#9325);+#9325 = AXIS2_PLACEMENT_3D('',#9326,#9327,#9328);+#9326 = CARTESIAN_POINT('',(3.574258671713,1.47598391805,0.193144044696)+  );+#9327 = DIRECTION('',(0.,-1.,0.));+#9328 = DIRECTION('',(-1.,0.,0.));+#9329 = DEFINITIONAL_REPRESENTATION('',(#9330),#9334);+#9330 = LINE('',#9331,#9332);+#9331 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9332 = VECTOR('',#9333,1.);+#9333 = DIRECTION('',(0.,1.));+#9334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9335 = ORIENTED_EDGE('',*,*,#9336,.F.);+#9336 = EDGE_CURVE('',#9337,#9309,#9339,.T.);+#9337 = VERTEX_POINT('',#9338);+#9338 = CARTESIAN_POINT('',(3.5,1.395983918052,0.193144044696));+#9339 = SURFACE_CURVE('',#9340,(#9344,#9351),.PCURVE_S1.);+#9340 = LINE('',#9341,#9342);+#9341 = CARTESIAN_POINT('',(3.5,1.395983918052,0.193144044696));+#9342 = VECTOR('',#9343,1.);+#9343 = DIRECTION('',(-1.110223024651E-14,1.,0.));+#9344 = PCURVE('',#194,#9345);+#9345 = DEFINITIONAL_REPRESENTATION('',(#9346),#9350);+#9346 = LINE('',#9347,#9348);+#9347 = CARTESIAN_POINT('',(1.395983918052,0.193144044696));+#9348 = VECTOR('',#9349,1.);+#9349 = DIRECTION('',(1.,0.));+#9350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9351 = PCURVE('',#9352,#9357);+#9352 = PLANE('',#9353);+#9353 = AXIS2_PLACEMENT_3D('',#9354,#9355,#9356);+#9354 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+    ));+#9355 = DIRECTION('',(0.,0.,1.));+#9356 = DIRECTION('',(1.,0.,-0.));+#9357 = DEFINITIONAL_REPRESENTATION('',(#9358),#9362);+#9358 = LINE('',#9359,#9360);+#9359 = CARTESIAN_POINT('',(0.710903945544,-0.331483192396));+#9360 = VECTOR('',#9361,1.);+#9361 = DIRECTION('',(-1.110223024651E-14,1.));+#9362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9363 = ORIENTED_EDGE('',*,*,#9364,.T.);+#9364 = EDGE_CURVE('',#9337,#9365,#9367,.T.);+#9365 = VERTEX_POINT('',#9366);+#9366 = CARTESIAN_POINT('',(3.5,1.395983918052,9.314404469578E-02));+#9367 = SURFACE_CURVE('',#9368,(#9372,#9379),.PCURVE_S1.);+#9368 = LINE('',#9369,#9370);+#9369 = CARTESIAN_POINT('',(3.5,1.395983918052,0.193144044696));+#9370 = VECTOR('',#9371,1.);+#9371 = DIRECTION('',(0.,0.,-1.));+#9372 = PCURVE('',#194,#9373);+#9373 = DEFINITIONAL_REPRESENTATION('',(#9374),#9378);+#9374 = LINE('',#9375,#9376);+#9375 = CARTESIAN_POINT('',(1.395983918052,0.193144044696));+#9376 = VECTOR('',#9377,1.);+#9377 = DIRECTION('',(0.,-1.));+#9378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9379 = PCURVE('',#9380,#9385);+#9380 = PLANE('',#9381);+#9381 = AXIS2_PLACEMENT_3D('',#9382,#9383,#9384);+#9382 = CARTESIAN_POINT('',(3.439258671704,1.395983918052,0.193144044696+    ));+#9383 = DIRECTION('',(0.,1.,0.));+#9384 = DIRECTION('',(1.,0.,0.));+#9385 = DEFINITIONAL_REPRESENTATION('',(#9386),#9390);+#9386 = LINE('',#9387,#9388);+#9387 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9388 = VECTOR('',#9389,1.);+#9389 = DIRECTION('',(0.,1.));+#9390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9391 = ORIENTED_EDGE('',*,*,#9392,.F.);+#9392 = EDGE_CURVE('',#9393,#9365,#9395,.T.);+#9393 = VERTEX_POINT('',#9394);+#9394 = CARTESIAN_POINT('',(3.5,1.345943709768,9.314404469578E-02));+#9395 = SURFACE_CURVE('',#9396,(#9400,#9407),.PCURVE_S1.);+#9396 = LINE('',#9397,#9398);+#9397 = CARTESIAN_POINT('',(3.5,1.345943709768,9.314404469578E-02));+#9398 = VECTOR('',#9399,1.);+#9399 = DIRECTION('',(0.,1.,0.));+#9400 = PCURVE('',#194,#9401);+#9401 = DEFINITIONAL_REPRESENTATION('',(#9402),#9406);+#9402 = LINE('',#9403,#9404);+#9403 = CARTESIAN_POINT('',(1.345943709768,9.314404469578E-02));+#9404 = VECTOR('',#9405,1.);+#9405 = DIRECTION('',(1.,0.));+#9406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9407 = PCURVE('',#8509,#9408);+#9408 = DEFINITIONAL_REPRESENTATION('',(#9409),#9413);+#9409 = LINE('',#9410,#9411);+#9410 = CARTESIAN_POINT('',(0.418617306392,-1.539748951727));+#9411 = VECTOR('',#9412,1.);+#9412 = DIRECTION('',(0.,1.));+#9413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9414 = ORIENTED_EDGE('',*,*,#9415,.F.);+#9415 = EDGE_CURVE('',#4033,#9393,#9416,.T.);+#9416 = SURFACE_CURVE('',#9417,(#9421,#9428),.PCURVE_S1.);+#9417 = LINE('',#9418,#9419);+#9418 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#9419 = VECTOR('',#9420,1.);+#9420 = DIRECTION('',(0.,0.,1.));+#9421 = PCURVE('',#194,#9422);+#9422 = DEFINITIONAL_REPRESENTATION('',(#9423),#9427);+#9423 = LINE('',#9424,#9425);+#9424 = CARTESIAN_POINT('',(1.345943709768,0.));+#9425 = VECTOR('',#9426,1.);+#9426 = DIRECTION('',(0.,1.));+#9427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9428 = PCURVE('',#4071,#9429);+#9429 = DEFINITIONAL_REPRESENTATION('',(#9430),#9434);+#9430 = LINE('',#9431,#9432);+#9431 = CARTESIAN_POINT('',(-5.9365546801E-04,9.314404469578E-02));+#9432 = VECTOR('',#9433,1.);+#9433 = DIRECTION('',(0.,-1.));+#9434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9435 = ORIENTED_EDGE('',*,*,#4032,.T.);+#9436 = ORIENTED_EDGE('',*,*,#9437,.T.);+#9437 = EDGE_CURVE('',#4000,#9438,#9440,.T.);+#9438 = VERTEX_POINT('',#9439);+#9439 = CARTESIAN_POINT('',(3.5,1.02544161323,9.314404469578E-02));+#9440 = SURFACE_CURVE('',#9441,(#9445,#9452),.PCURVE_S1.);+#9441 = LINE('',#9442,#9443);+#9442 = CARTESIAN_POINT('',(3.5,1.02544161323,0.));+#9443 = VECTOR('',#9444,1.);+#9444 = DIRECTION('',(0.,0.,1.));+#9445 = PCURVE('',#194,#9446);+#9446 = DEFINITIONAL_REPRESENTATION('',(#9447),#9451);+#9447 = LINE('',#9448,#9449);+#9448 = CARTESIAN_POINT('',(1.02544161323,0.));+#9449 = VECTOR('',#9450,1.);+#9450 = DIRECTION('',(0.,1.));+#9451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9452 = PCURVE('',#4020,#9453);+#9453 = DEFINITIONAL_REPRESENTATION('',(#9454),#9458);+#9454 = LINE('',#9455,#9456);+#9455 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#9456 = VECTOR('',#9457,1.);+#9457 = DIRECTION('',(0.,-1.));+#9458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9459 = ORIENTED_EDGE('',*,*,#9460,.F.);+#9460 = EDGE_CURVE('',#9461,#9438,#9463,.T.);+#9461 = VERTEX_POINT('',#9462);+#9462 = CARTESIAN_POINT('',(3.5,0.975983918052,9.314404469578E-02));+#9463 = SURFACE_CURVE('',#9464,(#9468,#9475),.PCURVE_S1.);+#9464 = LINE('',#9465,#9466);+#9465 = CARTESIAN_POINT('',(3.5,0.975983918052,9.314404469578E-02));+#9466 = VECTOR('',#9467,1.);+#9467 = DIRECTION('',(0.,1.,0.));+#9468 = PCURVE('',#194,#9469);+#9469 = DEFINITIONAL_REPRESENTATION('',(#9470),#9474);+#9470 = LINE('',#9471,#9472);+#9471 = CARTESIAN_POINT('',(0.975983918052,9.314404469578E-02));+#9472 = VECTOR('',#9473,1.);+#9473 = DIRECTION('',(1.,0.));+#9474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9475 = PCURVE('',#8509,#9476);+#9476 = DEFINITIONAL_REPRESENTATION('',(#9477),#9481);+#9477 = LINE('',#9478,#9479);+#9478 = CARTESIAN_POINT('',(0.418617306392,-1.909708743443));+#9479 = VECTOR('',#9480,1.);+#9480 = DIRECTION('',(0.,1.));+#9481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9482 = ORIENTED_EDGE('',*,*,#9483,.F.);+#9483 = EDGE_CURVE('',#9484,#9461,#9486,.T.);+#9484 = VERTEX_POINT('',#9485);+#9485 = CARTESIAN_POINT('',(3.5,0.975983918052,0.193144044696));+#9486 = SURFACE_CURVE('',#9487,(#9491,#9498),.PCURVE_S1.);+#9487 = LINE('',#9488,#9489);+#9488 = CARTESIAN_POINT('',(3.5,0.975983918052,0.193144044696));+#9489 = VECTOR('',#9490,1.);+#9490 = DIRECTION('',(0.,0.,-1.));+#9491 = PCURVE('',#194,#9492);+#9492 = DEFINITIONAL_REPRESENTATION('',(#9493),#9497);+#9493 = LINE('',#9494,#9495);+#9494 = CARTESIAN_POINT('',(0.975983918052,0.193144044696));+#9495 = VECTOR('',#9496,1.);+#9496 = DIRECTION('',(0.,-1.));+#9497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9498 = PCURVE('',#9499,#9504);+#9499 = PLANE('',#9500);+#9500 = AXIS2_PLACEMENT_3D('',#9501,#9502,#9503);+#9501 = CARTESIAN_POINT('',(3.574258671713,0.975983918052,0.193144044696+    ));+#9502 = DIRECTION('',(0.,-1.,0.));+#9503 = DIRECTION('',(-1.,0.,0.));+#9504 = DEFINITIONAL_REPRESENTATION('',(#9505),#9509);+#9505 = LINE('',#9506,#9507);+#9506 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9507 = VECTOR('',#9508,1.);+#9508 = DIRECTION('',(0.,1.));+#9509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9510 = ORIENTED_EDGE('',*,*,#9511,.F.);+#9511 = EDGE_CURVE('',#9512,#9484,#9514,.T.);+#9512 = VERTEX_POINT('',#9513);+#9513 = CARTESIAN_POINT('',(3.5,0.89598391805,0.193144044696));+#9514 = SURFACE_CURVE('',#9515,(#9519,#9526),.PCURVE_S1.);+#9515 = LINE('',#9516,#9517);+#9516 = CARTESIAN_POINT('',(3.5,0.89598391805,0.193144044696));+#9517 = VECTOR('',#9518,1.);+#9518 = DIRECTION('',(1.110223024588E-14,1.,0.));+#9519 = PCURVE('',#194,#9520);+#9520 = DEFINITIONAL_REPRESENTATION('',(#9521),#9525);+#9521 = LINE('',#9522,#9523);+#9522 = CARTESIAN_POINT('',(0.89598391805,0.193144044696));+#9523 = VECTOR('',#9524,1.);+#9524 = DIRECTION('',(1.,0.));+#9525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9526 = PCURVE('',#9527,#9532);+#9527 = PLANE('',#9528);+#9528 = AXIS2_PLACEMENT_3D('',#9529,#9530,#9531);+#9529 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+    ));+#9530 = DIRECTION('',(0.,0.,1.));+#9531 = DIRECTION('',(1.,0.,-0.));+#9532 = DEFINITIONAL_REPRESENTATION('',(#9533),#9537);+#9533 = LINE('',#9534,#9535);+#9534 = CARTESIAN_POINT('',(0.710903945544,-0.831483192398));+#9535 = VECTOR('',#9536,1.);+#9536 = DIRECTION('',(1.110223024588E-14,1.));+#9537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9538 = ORIENTED_EDGE('',*,*,#9539,.T.);+#9539 = EDGE_CURVE('',#9512,#9540,#9542,.T.);+#9540 = VERTEX_POINT('',#9541);+#9541 = CARTESIAN_POINT('',(3.5,0.89598391805,9.314404469578E-02));+#9542 = SURFACE_CURVE('',#9543,(#9547,#9554),.PCURVE_S1.);+#9543 = LINE('',#9544,#9545);+#9544 = CARTESIAN_POINT('',(3.5,0.89598391805,0.193144044696));+#9545 = VECTOR('',#9546,1.);+#9546 = DIRECTION('',(0.,0.,-1.));+#9547 = PCURVE('',#194,#9548);+#9548 = DEFINITIONAL_REPRESENTATION('',(#9549),#9553);+#9549 = LINE('',#9550,#9551);+#9550 = CARTESIAN_POINT('',(0.89598391805,0.193144044696));+#9551 = VECTOR('',#9552,1.);+#9552 = DIRECTION('',(0.,-1.));+#9553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9554 = PCURVE('',#9555,#9560);+#9555 = PLANE('',#9556);+#9556 = AXIS2_PLACEMENT_3D('',#9557,#9558,#9559);+#9557 = CARTESIAN_POINT('',(3.439258671704,0.89598391805,0.193144044696)+  );+#9558 = DIRECTION('',(0.,1.,0.));+#9559 = DIRECTION('',(1.,0.,0.));+#9560 = DEFINITIONAL_REPRESENTATION('',(#9561),#9565);+#9561 = LINE('',#9562,#9563);+#9562 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9563 = VECTOR('',#9564,1.);+#9564 = DIRECTION('',(0.,1.));+#9565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9566 = ORIENTED_EDGE('',*,*,#9567,.F.);+#9567 = EDGE_CURVE('',#9568,#9540,#9570,.T.);+#9568 = VERTEX_POINT('',#9569);+#9569 = CARTESIAN_POINT('',(3.5,0.845943709767,9.314404469578E-02));+#9570 = SURFACE_CURVE('',#9571,(#9575,#9582),.PCURVE_S1.);+#9571 = LINE('',#9572,#9573);+#9572 = CARTESIAN_POINT('',(3.5,0.845943709767,9.314404469578E-02));+#9573 = VECTOR('',#9574,1.);+#9574 = DIRECTION('',(0.,1.,0.));+#9575 = PCURVE('',#194,#9576);+#9576 = DEFINITIONAL_REPRESENTATION('',(#9577),#9581);+#9577 = LINE('',#9578,#9579);+#9578 = CARTESIAN_POINT('',(0.845943709767,9.314404469578E-02));+#9579 = VECTOR('',#9580,1.);+#9580 = DIRECTION('',(1.,0.));+#9581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9582 = PCURVE('',#8509,#9583);+#9583 = DEFINITIONAL_REPRESENTATION('',(#9584),#9588);+#9584 = LINE('',#9585,#9586);+#9585 = CARTESIAN_POINT('',(0.418617306392,-2.039748951728));+#9586 = VECTOR('',#9587,1.);+#9587 = DIRECTION('',(0.,1.));+#9588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9589 = ORIENTED_EDGE('',*,*,#9590,.F.);+#9590 = EDGE_CURVE('',#3862,#9568,#9591,.T.);+#9591 = SURFACE_CURVE('',#9592,(#9596,#9603),.PCURVE_S1.);+#9592 = LINE('',#9593,#9594);+#9593 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#9594 = VECTOR('',#9595,1.);+#9595 = DIRECTION('',(0.,0.,1.));+#9596 = PCURVE('',#194,#9597);+#9597 = DEFINITIONAL_REPRESENTATION('',(#9598),#9602);+#9598 = LINE('',#9599,#9600);+#9599 = CARTESIAN_POINT('',(0.845943709767,0.));+#9600 = VECTOR('',#9601,1.);+#9601 = DIRECTION('',(0.,1.));+#9602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9603 = PCURVE('',#3900,#9604);+#9604 = DEFINITIONAL_REPRESENTATION('',(#9605),#9609);+#9605 = LINE('',#9606,#9607);+#9606 = CARTESIAN_POINT('',(-5.936554675872E-04,9.314404469578E-02));+#9607 = VECTOR('',#9608,1.);+#9608 = DIRECTION('',(0.,-1.));+#9609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9610 = ORIENTED_EDGE('',*,*,#3861,.T.);+#9611 = ORIENTED_EDGE('',*,*,#9612,.T.);+#9612 = EDGE_CURVE('',#3829,#9613,#9615,.T.);+#9613 = VERTEX_POINT('',#9614);+#9614 = CARTESIAN_POINT('',(3.5,0.52544161323,9.314404469578E-02));+#9615 = SURFACE_CURVE('',#9616,(#9620,#9627),.PCURVE_S1.);+#9616 = LINE('',#9617,#9618);+#9617 = CARTESIAN_POINT('',(3.5,0.52544161323,0.));+#9618 = VECTOR('',#9619,1.);+#9619 = DIRECTION('',(0.,0.,1.));+#9620 = PCURVE('',#194,#9621);+#9621 = DEFINITIONAL_REPRESENTATION('',(#9622),#9626);+#9622 = LINE('',#9623,#9624);+#9623 = CARTESIAN_POINT('',(0.52544161323,0.));+#9624 = VECTOR('',#9625,1.);+#9625 = DIRECTION('',(0.,1.));+#9626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9627 = PCURVE('',#3849,#9628);+#9628 = DEFINITIONAL_REPRESENTATION('',(#9629),#9633);+#9629 = LINE('',#9630,#9631);+#9630 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#9631 = VECTOR('',#9632,1.);+#9632 = DIRECTION('',(0.,-1.));+#9633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9634 = ORIENTED_EDGE('',*,*,#9635,.F.);+#9635 = EDGE_CURVE('',#9636,#9613,#9638,.T.);+#9636 = VERTEX_POINT('',#9637);+#9637 = CARTESIAN_POINT('',(3.5,0.475983918055,9.314404469578E-02));+#9638 = SURFACE_CURVE('',#9639,(#9643,#9650),.PCURVE_S1.);+#9639 = LINE('',#9640,#9641);+#9640 = CARTESIAN_POINT('',(3.5,0.475983918055,9.314404469578E-02));+#9641 = VECTOR('',#9642,1.);+#9642 = DIRECTION('',(0.,1.,0.));+#9643 = PCURVE('',#194,#9644);+#9644 = DEFINITIONAL_REPRESENTATION('',(#9645),#9649);+#9645 = LINE('',#9646,#9647);+#9646 = CARTESIAN_POINT('',(0.475983918055,9.314404469578E-02));+#9647 = VECTOR('',#9648,1.);+#9648 = DIRECTION('',(1.,0.));+#9649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9650 = PCURVE('',#8509,#9651);+#9651 = DEFINITIONAL_REPRESENTATION('',(#9652),#9656);+#9652 = LINE('',#9653,#9654);+#9653 = CARTESIAN_POINT('',(0.418617306392,-2.40970874344));+#9654 = VECTOR('',#9655,1.);+#9655 = DIRECTION('',(0.,1.));+#9656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9657 = ORIENTED_EDGE('',*,*,#9658,.F.);+#9658 = EDGE_CURVE('',#9659,#9636,#9661,.T.);+#9659 = VERTEX_POINT('',#9660);+#9660 = CARTESIAN_POINT('',(3.5,0.475983918055,0.193144044696));+#9661 = SURFACE_CURVE('',#9662,(#9666,#9673),.PCURVE_S1.);+#9662 = LINE('',#9663,#9664);+#9663 = CARTESIAN_POINT('',(3.5,0.475983918055,0.193144044696));+#9664 = VECTOR('',#9665,1.);+#9665 = DIRECTION('',(0.,0.,-1.));+#9666 = PCURVE('',#194,#9667);+#9667 = DEFINITIONAL_REPRESENTATION('',(#9668),#9672);+#9668 = LINE('',#9669,#9670);+#9669 = CARTESIAN_POINT('',(0.475983918055,0.193144044696));+#9670 = VECTOR('',#9671,1.);+#9671 = DIRECTION('',(0.,-1.));+#9672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9673 = PCURVE('',#9674,#9679);+#9674 = PLANE('',#9675);+#9675 = AXIS2_PLACEMENT_3D('',#9676,#9677,#9678);+#9676 = CARTESIAN_POINT('',(3.574258671713,0.475983918055,0.193144044696+    ));+#9677 = DIRECTION('',(0.,-1.,0.));+#9678 = DIRECTION('',(-1.,0.,0.));+#9679 = DEFINITIONAL_REPRESENTATION('',(#9680),#9684);+#9680 = LINE('',#9681,#9682);+#9681 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9682 = VECTOR('',#9683,1.);+#9683 = DIRECTION('',(0.,1.));+#9684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9685 = ORIENTED_EDGE('',*,*,#9686,.F.);+#9686 = EDGE_CURVE('',#9687,#9659,#9689,.T.);+#9687 = VERTEX_POINT('',#9688);+#9688 = CARTESIAN_POINT('',(3.5,0.395983918053,0.193144044696));+#9689 = SURFACE_CURVE('',#9690,(#9694,#9701),.PCURVE_S1.);+#9690 = LINE('',#9691,#9692);+#9691 = CARTESIAN_POINT('',(3.5,0.395983918053,0.193144044696));+#9692 = VECTOR('',#9693,1.);+#9693 = DIRECTION('',(0.,1.,0.));+#9694 = PCURVE('',#194,#9695);+#9695 = DEFINITIONAL_REPRESENTATION('',(#9696),#9700);+#9696 = LINE('',#9697,#9698);+#9697 = CARTESIAN_POINT('',(0.395983918053,0.193144044696));+#9698 = VECTOR('',#9699,1.);+#9699 = DIRECTION('',(1.,0.));+#9700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9701 = PCURVE('',#9702,#9707);+#9702 = PLANE('',#9703);+#9703 = AXIS2_PLACEMENT_3D('',#9704,#9705,#9706);+#9704 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+    ));+#9705 = DIRECTION('',(0.,0.,1.));+#9706 = DIRECTION('',(1.,0.,-0.));+#9707 = DEFINITIONAL_REPRESENTATION('',(#9708),#9712);+#9708 = LINE('',#9709,#9710);+#9709 = CARTESIAN_POINT('',(0.710903945544,-1.331483192395));+#9710 = VECTOR('',#9711,1.);+#9711 = DIRECTION('',(0.,1.));+#9712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9713 = ORIENTED_EDGE('',*,*,#9714,.T.);+#9714 = EDGE_CURVE('',#9687,#8494,#9715,.T.);+#9715 = SURFACE_CURVE('',#9716,(#9720,#9727),.PCURVE_S1.);+#9716 = LINE('',#9717,#9718);+#9717 = CARTESIAN_POINT('',(3.5,0.395983918053,0.193144044696));+#9718 = VECTOR('',#9719,1.);+#9719 = DIRECTION('',(0.,0.,-1.));+#9720 = PCURVE('',#194,#9721);+#9721 = DEFINITIONAL_REPRESENTATION('',(#9722),#9726);+#9722 = LINE('',#9723,#9724);+#9723 = CARTESIAN_POINT('',(0.395983918053,0.193144044696));+#9724 = VECTOR('',#9725,1.);+#9725 = DIRECTION('',(0.,-1.));+#9726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9727 = PCURVE('',#9728,#9733);+#9728 = PLANE('',#9729);+#9729 = AXIS2_PLACEMENT_3D('',#9730,#9731,#9732);+#9730 = CARTESIAN_POINT('',(3.439258671704,0.395983918053,0.193144044696+    ));+#9731 = DIRECTION('',(0.,1.,0.));+#9732 = DIRECTION('',(1.,0.,0.));+#9733 = DEFINITIONAL_REPRESENTATION('',(#9734),#9738);+#9734 = LINE('',#9735,#9736);+#9735 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9736 = VECTOR('',#9737,1.);+#9737 = DIRECTION('',(0.,1.));+#9738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9739 = ADVANCED_FACE('',(#9740),#8509,.F.);+#9740 = FACE_BOUND('',#9741,.F.);+#9741 = EDGE_LOOP('',(#9742,#9743,#9766,#9794,#9815,#9816,#9839,#9862,+    #9885,#9908,#9929,#9930,#9953,#9981,#10002,#10003,#10026,#10049,+    #10072,#10095,#10116,#10117,#10140,#10168,#10189,#10190,#10213,+    #10236,#10259,#10282,#10303,#10304,#10327,#10355,#10376,#10377,+    #10400,#10423,#10446,#10469,#10497,#10520,#10548,#10571,#10594,+    #10617));+#9742 = ORIENTED_EDGE('',*,*,#8491,.T.);+#9743 = ORIENTED_EDGE('',*,*,#9744,.T.);+#9744 = EDGE_CURVE('',#8494,#9745,#9747,.T.);+#9745 = VERTEX_POINT('',#9746);+#9746 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+    9.314404469578E-02));+#9747 = SURFACE_CURVE('',#9748,(#9752,#9759),.PCURVE_S1.);+#9748 = LINE('',#9749,#9750);+#9749 = CARTESIAN_POINT('',(3.5,0.395983918053,9.314404469578E-02));+#9750 = VECTOR('',#9751,1.);+#9751 = DIRECTION('',(-1.,0.,0.));+#9752 = PCURVE('',#8509,#9753);+#9753 = DEFINITIONAL_REPRESENTATION('',(#9754),#9758);+#9754 = LINE('',#9755,#9756);+#9755 = CARTESIAN_POINT('',(0.418617306392,-2.489708743442));+#9756 = VECTOR('',#9757,1.);+#9757 = DIRECTION('',(-1.,0.));+#9758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9759 = PCURVE('',#9728,#9760);+#9760 = DEFINITIONAL_REPRESENTATION('',(#9761),#9765);+#9761 = LINE('',#9762,#9763);+#9762 = CARTESIAN_POINT('',(6.0741328296E-02,0.1));+#9763 = VECTOR('',#9764,1.);+#9764 = DIRECTION('',(-1.,0.));+#9765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9766 = ORIENTED_EDGE('',*,*,#9767,.T.);+#9767 = EDGE_CURVE('',#9745,#9768,#9770,.T.);+#9768 = VERTEX_POINT('',#9769);+#9769 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+    9.314404469578E-02));+#9770 = SURFACE_CURVE('',#9771,(#9775,#9782),.PCURVE_S1.);+#9771 = LINE('',#9772,#9773);+#9772 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+    9.314404469578E-02));+#9773 = VECTOR('',#9774,1.);+#9774 = DIRECTION('',(0.,1.,0.));+#9775 = PCURVE('',#8509,#9776);+#9776 = DEFINITIONAL_REPRESENTATION('',(#9777),#9781);+#9777 = LINE('',#9778,#9779);+#9778 = CARTESIAN_POINT('',(0.368584098237,-2.489708743442));+#9779 = VECTOR('',#9780,1.);+#9780 = DIRECTION('',(0.,1.));+#9781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9782 = PCURVE('',#9783,#9788);+#9783 = PLANE('',#9784);+#9784 = AXIS2_PLACEMENT_3D('',#9785,#9786,#9787);+#9785 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,0.193144044696+    ));+#9786 = DIRECTION('',(1.,0.,0.));+#9787 = DIRECTION('',(-0.,1.,0.));+#9788 = DEFINITIONAL_REPRESENTATION('',(#9789),#9793);+#9789 = LINE('',#9790,#9791);+#9790 = CARTESIAN_POINT('',(0.247592270345,-0.1));+#9791 = VECTOR('',#9792,1.);+#9792 = DIRECTION('',(1.,0.));+#9793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9794 = ORIENTED_EDGE('',*,*,#9795,.T.);+#9795 = EDGE_CURVE('',#9768,#9636,#9796,.T.);+#9796 = SURFACE_CURVE('',#9797,(#9801,#9808),.PCURVE_S1.);+#9797 = LINE('',#9798,#9799);+#9798 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+    9.314404469578E-02));+#9799 = VECTOR('',#9800,1.);+#9800 = DIRECTION('',(1.,0.,0.));+#9801 = PCURVE('',#8509,#9802);+#9802 = DEFINITIONAL_REPRESENTATION('',(#9803),#9807);+#9803 = LINE('',#9804,#9805);+#9804 = CARTESIAN_POINT('',(0.368584098237,-2.40970874344));+#9805 = VECTOR('',#9806,1.);+#9806 = DIRECTION('',(1.,0.));+#9807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9808 = PCURVE('',#9674,#9809);+#9809 = DEFINITIONAL_REPRESENTATION('',(#9810),#9814);+#9810 = LINE('',#9811,#9812);+#9811 = CARTESIAN_POINT('',(0.124291879868,0.1));+#9812 = VECTOR('',#9813,1.);+#9813 = DIRECTION('',(-1.,-0.));+#9814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9815 = ORIENTED_EDGE('',*,*,#9635,.T.);+#9816 = ORIENTED_EDGE('',*,*,#9817,.F.);+#9817 = EDGE_CURVE('',#9818,#9613,#9820,.T.);+#9818 = VERTEX_POINT('',#9819);+#9819 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+    9.314404469578E-02));+#9820 = SURFACE_CURVE('',#9821,(#9825,#9832),.PCURVE_S1.);+#9821 = LINE('',#9822,#9823);+#9822 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+    9.314404469578E-02));+#9823 = VECTOR('',#9824,1.);+#9824 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#9825 = PCURVE('',#8509,#9826);+#9826 = DEFINITIONAL_REPRESENTATION('',(#9827),#9831);+#9827 = LINE('',#9828,#9829);+#9828 = CARTESIAN_POINT('',(0.343079345823,-2.324999999998));+#9829 = VECTOR('',#9830,1.);+#9830 = DIRECTION('',(0.90618313999,-0.422885465342));+#9831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9832 = PCURVE('',#3849,#9833);+#9833 = DEFINITIONAL_REPRESENTATION('',(#9834),#9838);+#9834 = LINE('',#9835,#9836);+#9835 = CARTESIAN_POINT('',(4.470391181211E-12,0.));+#9836 = VECTOR('',#9837,1.);+#9837 = DIRECTION('',(1.,0.));+#9838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9839 = ORIENTED_EDGE('',*,*,#9840,.T.);+#9840 = EDGE_CURVE('',#9818,#9841,#9843,.T.);+#9841 = VERTEX_POINT('',#9842);+#9842 = CARTESIAN_POINT('',(3.29946203942,0.560692661497,+    9.314404469578E-02));+#9843 = SURFACE_CURVE('',#9844,(#9848,#9855),.PCURVE_S1.);+#9844 = LINE('',#9845,#9846);+#9845 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+    9.314404469578E-02));+#9846 = VECTOR('',#9847,1.);+#9847 = DIRECTION('',(-1.,0.,0.));+#9848 = PCURVE('',#8509,#9849);+#9849 = DEFINITIONAL_REPRESENTATION('',(#9850),#9854);+#9850 = LINE('',#9851,#9852);+#9851 = CARTESIAN_POINT('',(0.343079345823,-2.324999999998));+#9852 = VECTOR('',#9853,1.);+#9853 = DIRECTION('',(-1.,0.));+#9854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9855 = PCURVE('',#3982,#9856);+#9856 = DEFINITIONAL_REPRESENTATION('',(#9857),#9861);+#9857 = LINE('',#9858,#9859);+#9858 = CARTESIAN_POINT('',(-6.625000104066E-09,0.));+#9859 = VECTOR('',#9860,1.);+#9860 = DIRECTION('',(1.,0.));+#9861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9862 = ORIENTED_EDGE('',*,*,#9863,.F.);+#9863 = EDGE_CURVE('',#9864,#9841,#9866,.T.);+#9864 = VERTEX_POINT('',#9865);+#9865 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,+    9.314404469578E-02));+#9866 = SURFACE_CURVE('',#9867,(#9871,#9878),.PCURVE_S1.);+#9867 = LINE('',#9868,#9869);+#9868 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,+    9.314404469578E-02));+#9869 = VECTOR('',#9870,1.);+#9870 = DIRECTION('',(0.,-1.,0.));+#9871 = PCURVE('',#8509,#9872);+#9872 = DEFINITIONAL_REPRESENTATION('',(#9873),#9877);+#9873 = LINE('',#9874,#9875);+#9874 = CARTESIAN_POINT('',(0.218079345812,-2.074999999993));+#9875 = VECTOR('',#9876,1.);+#9876 = DIRECTION('',(0.,-1.));+#9877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9878 = PCURVE('',#3956,#9879);+#9879 = DEFINITIONAL_REPRESENTATION('',(#9880),#9884);+#9880 = LINE('',#9881,#9882);+#9881 = CARTESIAN_POINT('',(-4.000022535422E-12,0.));+#9882 = VECTOR('',#9883,1.);+#9883 = DIRECTION('',(1.,0.));+#9884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9885 = ORIENTED_EDGE('',*,*,#9886,.T.);+#9886 = EDGE_CURVE('',#9864,#9887,#9889,.T.);+#9887 = VERTEX_POINT('',#9888);+#9888 = CARTESIAN_POINT('',(3.424462039434,0.810692661502,+    9.314404469578E-02));+#9889 = SURFACE_CURVE('',#9890,(#9894,#9901),.PCURVE_S1.);+#9890 = LINE('',#9891,#9892);+#9891 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,+    9.314404469578E-02));+#9892 = VECTOR('',#9893,1.);+#9893 = DIRECTION('',(1.,0.,0.));+#9894 = PCURVE('',#8509,#9895);+#9895 = DEFINITIONAL_REPRESENTATION('',(#9896),#9900);+#9896 = LINE('',#9897,#9898);+#9897 = CARTESIAN_POINT('',(0.218079345812,-2.074999999993));+#9898 = VECTOR('',#9899,1.);+#9899 = DIRECTION('',(1.,0.));+#9900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9901 = PCURVE('',#3928,#9902);+#9902 = DEFINITIONAL_REPRESENTATION('',(#9903),#9907);+#9903 = LINE('',#9904,#9905);+#9904 = CARTESIAN_POINT('',(-4.9999999992E-02,0.));+#9905 = VECTOR('',#9906,1.);+#9906 = DIRECTION('',(1.,0.));+#9907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9908 = ORIENTED_EDGE('',*,*,#9909,.F.);+#9909 = EDGE_CURVE('',#9568,#9887,#9910,.T.);+#9910 = SURFACE_CURVE('',#9911,(#9915,#9922),.PCURVE_S1.);+#9911 = LINE('',#9912,#9913);+#9912 = CARTESIAN_POINT('',(3.5,0.845943709767,9.314404469578E-02));+#9913 = VECTOR('',#9914,1.);+#9914 = DIRECTION('',(-0.90618313999,-0.422885465342,0.));+#9915 = PCURVE('',#8509,#9916);+#9916 = DEFINITIONAL_REPRESENTATION('',(#9917),#9921);+#9917 = LINE('',#9918,#9919);+#9918 = CARTESIAN_POINT('',(0.418617306392,-2.039748951728));+#9919 = VECTOR('',#9920,1.);+#9920 = DIRECTION('',(-0.90618313999,-0.422885465342));+#9921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9922 = PCURVE('',#3900,#9923);+#9923 = DEFINITIONAL_REPRESENTATION('',(#9924),#9928);+#9924 = LINE('',#9925,#9926);+#9925 = CARTESIAN_POINT('',(-5.936554675872E-04,0.));+#9926 = VECTOR('',#9927,1.);+#9927 = DIRECTION('',(1.,0.));+#9928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9929 = ORIENTED_EDGE('',*,*,#9567,.T.);+#9930 = ORIENTED_EDGE('',*,*,#9931,.T.);+#9931 = EDGE_CURVE('',#9540,#9932,#9934,.T.);+#9932 = VERTEX_POINT('',#9933);+#9933 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,+    9.314404469578E-02));+#9934 = SURFACE_CURVE('',#9935,(#9939,#9946),.PCURVE_S1.);+#9935 = LINE('',#9936,#9937);+#9936 = CARTESIAN_POINT('',(3.5,0.89598391805,9.314404469578E-02));+#9937 = VECTOR('',#9938,1.);+#9938 = DIRECTION('',(-1.,0.,0.));+#9939 = PCURVE('',#8509,#9940);+#9940 = DEFINITIONAL_REPRESENTATION('',(#9941),#9945);+#9941 = LINE('',#9942,#9943);+#9942 = CARTESIAN_POINT('',(0.418617306392,-1.989708743445));+#9943 = VECTOR('',#9944,1.);+#9944 = DIRECTION('',(-1.,0.));+#9945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9946 = PCURVE('',#9555,#9947);+#9947 = DEFINITIONAL_REPRESENTATION('',(#9948),#9952);+#9948 = LINE('',#9949,#9950);+#9949 = CARTESIAN_POINT('',(6.0741328296E-02,0.1));+#9950 = VECTOR('',#9951,1.);+#9951 = DIRECTION('',(-1.,0.));+#9952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9953 = ORIENTED_EDGE('',*,*,#9954,.T.);+#9954 = EDGE_CURVE('',#9932,#9955,#9957,.T.);+#9955 = VERTEX_POINT('',#9956);+#9956 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+    9.314404469578E-02));+#9957 = SURFACE_CURVE('',#9958,(#9962,#9969),.PCURVE_S1.);+#9958 = LINE('',#9959,#9960);+#9959 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,+    9.314404469578E-02));+#9960 = VECTOR('',#9961,1.);+#9961 = DIRECTION('',(0.,1.,0.));+#9962 = PCURVE('',#8509,#9963);+#9963 = DEFINITIONAL_REPRESENTATION('',(#9964),#9968);+#9964 = LINE('',#9965,#9966);+#9965 = CARTESIAN_POINT('',(0.368584098237,-1.989708743445));+#9966 = VECTOR('',#9967,1.);+#9967 = DIRECTION('',(0.,1.));+#9968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9969 = PCURVE('',#9970,#9975);+#9970 = PLANE('',#9971);+#9971 = AXIS2_PLACEMENT_3D('',#9972,#9973,#9974);+#9972 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,0.193144044696+    ));+#9973 = DIRECTION('',(1.,0.,0.));+#9974 = DIRECTION('',(-0.,1.,0.));+#9975 = DEFINITIONAL_REPRESENTATION('',(#9976),#9980);+#9976 = LINE('',#9977,#9978);+#9977 = CARTESIAN_POINT('',(0.747592270342,-0.1));+#9978 = VECTOR('',#9979,1.);+#9979 = DIRECTION('',(1.,0.));+#9980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9981 = ORIENTED_EDGE('',*,*,#9982,.T.);+#9982 = EDGE_CURVE('',#9955,#9461,#9983,.T.);+#9983 = SURFACE_CURVE('',#9984,(#9988,#9995),.PCURVE_S1.);+#9984 = LINE('',#9985,#9986);+#9985 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+    9.314404469578E-02));+#9986 = VECTOR('',#9987,1.);+#9987 = DIRECTION('',(1.,0.,0.));+#9988 = PCURVE('',#8509,#9989);+#9989 = DEFINITIONAL_REPRESENTATION('',(#9990),#9994);+#9990 = LINE('',#9991,#9992);+#9991 = CARTESIAN_POINT('',(0.368584098237,-1.909708743443));+#9992 = VECTOR('',#9993,1.);+#9993 = DIRECTION('',(1.,0.));+#9994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#9995 = PCURVE('',#9499,#9996);+#9996 = DEFINITIONAL_REPRESENTATION('',(#9997),#10001);+#9997 = LINE('',#9998,#9999);+#9998 = CARTESIAN_POINT('',(0.124291879868,0.1));+#9999 = VECTOR('',#10000,1.);+#10000 = DIRECTION('',(-1.,-0.));+#10001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10002 = ORIENTED_EDGE('',*,*,#9460,.T.);+#10003 = ORIENTED_EDGE('',*,*,#10004,.F.);+#10004 = EDGE_CURVE('',#10005,#9438,#10007,.T.);+#10005 = VERTEX_POINT('',#10006);+#10006 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+    9.314404469578E-02));+#10007 = SURFACE_CURVE('',#10008,(#10012,#10019),.PCURVE_S1.);+#10008 = LINE('',#10009,#10010);+#10009 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+    9.314404469578E-02));+#10010 = VECTOR('',#10011,1.);+#10011 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#10012 = PCURVE('',#8509,#10013);+#10013 = DEFINITIONAL_REPRESENTATION('',(#10014),#10018);+#10014 = LINE('',#10015,#10016);+#10015 = CARTESIAN_POINT('',(0.343079345819,-1.824999999996));+#10016 = VECTOR('',#10017,1.);+#10017 = DIRECTION('',(0.90618313999,-0.422885465342));+#10018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10019 = PCURVE('',#4020,#10020);+#10020 = DEFINITIONAL_REPRESENTATION('',(#10021),#10025);+#10021 = LINE('',#10022,#10023);+#10022 = CARTESIAN_POINT('',(0.,0.));+#10023 = VECTOR('',#10024,1.);+#10024 = DIRECTION('',(1.,0.));+#10025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10026 = ORIENTED_EDGE('',*,*,#10027,.T.);+#10027 = EDGE_CURVE('',#10005,#10028,#10030,.T.);+#10028 = VERTEX_POINT('',#10029);+#10029 = CARTESIAN_POINT('',(3.29946203942,1.060692661499,+    9.314404469578E-02));+#10030 = SURFACE_CURVE('',#10031,(#10035,#10042),.PCURVE_S1.);+#10031 = LINE('',#10032,#10033);+#10032 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+    9.314404469578E-02));+#10033 = VECTOR('',#10034,1.);+#10034 = DIRECTION('',(-1.,0.,0.));+#10035 = PCURVE('',#8509,#10036);+#10036 = DEFINITIONAL_REPRESENTATION('',(#10037),#10041);+#10037 = LINE('',#10038,#10039);+#10038 = CARTESIAN_POINT('',(0.343079345819,-1.824999999996));+#10039 = VECTOR('',#10040,1.);+#10040 = DIRECTION('',(-1.,0.));+#10041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10042 = PCURVE('',#4153,#10043);+#10043 = DEFINITIONAL_REPRESENTATION('',(#10044),#10048);+#10044 = LINE('',#10045,#10046);+#10045 = CARTESIAN_POINT('',(-6.621000192553E-09,0.));+#10046 = VECTOR('',#10047,1.);+#10047 = DIRECTION('',(1.,0.));+#10048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10049 = ORIENTED_EDGE('',*,*,#10050,.F.);+#10050 = EDGE_CURVE('',#10051,#10028,#10053,.T.);+#10051 = VERTEX_POINT('',#10052);+#10052 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,+    9.314404469578E-02));+#10053 = SURFACE_CURVE('',#10054,(#10058,#10065),.PCURVE_S1.);+#10054 = LINE('',#10055,#10056);+#10055 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,+    9.314404469578E-02));+#10056 = VECTOR('',#10057,1.);+#10057 = DIRECTION('',(0.,-1.,0.));+#10058 = PCURVE('',#8509,#10059);+#10059 = DEFINITIONAL_REPRESENTATION('',(#10060),#10064);+#10060 = LINE('',#10061,#10062);+#10061 = CARTESIAN_POINT('',(0.218079345812,-1.575));+#10062 = VECTOR('',#10063,1.);+#10063 = DIRECTION('',(0.,-1.));+#10064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10065 = PCURVE('',#4127,#10066);+#10066 = DEFINITIONAL_REPRESENTATION('',(#10067),#10071);+#10067 = LINE('',#10068,#10069);+#10068 = CARTESIAN_POINT('',(3.99991151312E-12,0.));+#10069 = VECTOR('',#10070,1.);+#10070 = DIRECTION('',(1.,0.));+#10071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10072 = ORIENTED_EDGE('',*,*,#10073,.T.);+#10073 = EDGE_CURVE('',#10051,#10074,#10076,.T.);+#10074 = VERTEX_POINT('',#10075);+#10075 = CARTESIAN_POINT('',(3.42446203942,1.310692661495,+    9.314404469578E-02));+#10076 = SURFACE_CURVE('',#10077,(#10081,#10088),.PCURVE_S1.);+#10077 = LINE('',#10078,#10079);+#10078 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,+    9.314404469578E-02));+#10079 = VECTOR('',#10080,1.);+#10080 = DIRECTION('',(1.,0.,0.));+#10081 = PCURVE('',#8509,#10082);+#10082 = DEFINITIONAL_REPRESENTATION('',(#10083),#10087);+#10083 = LINE('',#10084,#10085);+#10084 = CARTESIAN_POINT('',(0.218079345812,-1.575));+#10085 = VECTOR('',#10086,1.);+#10086 = DIRECTION('',(1.,0.));+#10087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10088 = PCURVE('',#4099,#10089);+#10089 = DEFINITIONAL_REPRESENTATION('',(#10090),#10094);+#10090 = LINE('',#10091,#10092);+#10091 = CARTESIAN_POINT('',(-4.9999993389E-02,0.));+#10092 = VECTOR('',#10093,1.);+#10093 = DIRECTION('',(1.,0.));+#10094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10095 = ORIENTED_EDGE('',*,*,#10096,.F.);+#10096 = EDGE_CURVE('',#9393,#10074,#10097,.T.);+#10097 = SURFACE_CURVE('',#10098,(#10102,#10109),.PCURVE_S1.);+#10098 = LINE('',#10099,#10100);+#10099 = CARTESIAN_POINT('',(3.5,1.345943709768,9.314404469578E-02));+#10100 = VECTOR('',#10101,1.);+#10101 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#10102 = PCURVE('',#8509,#10103);+#10103 = DEFINITIONAL_REPRESENTATION('',(#10104),#10108);+#10104 = LINE('',#10105,#10106);+#10105 = CARTESIAN_POINT('',(0.418617306392,-1.539748951727));+#10106 = VECTOR('',#10107,1.);+#10107 = DIRECTION('',(-0.906183139987,-0.422885465348));+#10108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10109 = PCURVE('',#4071,#10110);+#10110 = DEFINITIONAL_REPRESENTATION('',(#10111),#10115);+#10111 = LINE('',#10112,#10113);+#10112 = CARTESIAN_POINT('',(-5.9365546801E-04,0.));+#10113 = VECTOR('',#10114,1.);+#10114 = DIRECTION('',(1.,0.));+#10115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10116 = ORIENTED_EDGE('',*,*,#9392,.T.);+#10117 = ORIENTED_EDGE('',*,*,#10118,.F.);+#10118 = EDGE_CURVE('',#10119,#9365,#10121,.T.);+#10119 = VERTEX_POINT('',#10120);+#10120 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+    9.314404469578E-02));+#10121 = SURFACE_CURVE('',#10122,(#10126,#10133),.PCURVE_S1.);+#10122 = LINE('',#10123,#10124);+#10123 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+    9.314404469578E-02));+#10124 = VECTOR('',#10125,1.);+#10125 = DIRECTION('',(1.,0.,0.));+#10126 = PCURVE('',#8509,#10127);+#10127 = DEFINITIONAL_REPRESENTATION('',(#10128),#10132);+#10128 = LINE('',#10129,#10130);+#10129 = CARTESIAN_POINT('',(0.368584098237,-1.489708743443));+#10130 = VECTOR('',#10131,1.);+#10131 = DIRECTION('',(1.,0.));+#10132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10133 = PCURVE('',#9380,#10134);+#10134 = DEFINITIONAL_REPRESENTATION('',(#10135),#10139);+#10135 = LINE('',#10136,#10137);+#10136 = CARTESIAN_POINT('',(1.0708120141E-02,0.1));+#10137 = VECTOR('',#10138,1.);+#10138 = DIRECTION('',(1.,0.));+#10139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10140 = ORIENTED_EDGE('',*,*,#10141,.T.);+#10141 = EDGE_CURVE('',#10119,#10142,#10144,.T.);+#10142 = VERTEX_POINT('',#10143);+#10143 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,+    9.314404469578E-02));+#10144 = SURFACE_CURVE('',#10145,(#10149,#10156),.PCURVE_S1.);+#10145 = LINE('',#10146,#10147);+#10146 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+    9.314404469578E-02));+#10147 = VECTOR('',#10148,1.);+#10148 = DIRECTION('',(1.110223024651E-14,1.,0.));+#10149 = PCURVE('',#8509,#10150);+#10150 = DEFINITIONAL_REPRESENTATION('',(#10151),#10155);+#10151 = LINE('',#10152,#10153);+#10152 = CARTESIAN_POINT('',(0.368584098237,-1.489708743443));+#10153 = VECTOR('',#10154,1.);+#10154 = DIRECTION('',(1.110223024651E-14,1.));+#10155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10156 = PCURVE('',#10157,#10162);+#10157 = PLANE('',#10158);+#10158 = AXIS2_PLACEMENT_3D('',#10159,#10160,#10161);+#10159 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,+    0.193144044696));+#10160 = DIRECTION('',(1.,0.,0.));+#10161 = DIRECTION('',(-0.,1.,0.));+#10162 = DEFINITIONAL_REPRESENTATION('',(#10163),#10167);+#10163 = LINE('',#10164,#10165);+#10164 = CARTESIAN_POINT('',(1.247592270344,-0.1));+#10165 = VECTOR('',#10166,1.);+#10166 = DIRECTION('',(1.,0.));+#10167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10168 = ORIENTED_EDGE('',*,*,#10169,.T.);+#10169 = EDGE_CURVE('',#10142,#9286,#10170,.T.);+#10170 = SURFACE_CURVE('',#10171,(#10175,#10182),.PCURVE_S1.);+#10171 = LINE('',#10172,#10173);+#10172 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,+    9.314404469578E-02));+#10173 = VECTOR('',#10174,1.);+#10174 = DIRECTION('',(1.,0.,0.));+#10175 = PCURVE('',#8509,#10176);+#10176 = DEFINITIONAL_REPRESENTATION('',(#10177),#10181);+#10177 = LINE('',#10178,#10179);+#10178 = CARTESIAN_POINT('',(0.368584098237,-1.409708743445));+#10179 = VECTOR('',#10180,1.);+#10180 = DIRECTION('',(1.,0.));+#10181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10182 = PCURVE('',#9324,#10183);+#10183 = DEFINITIONAL_REPRESENTATION('',(#10184),#10188);+#10184 = LINE('',#10185,#10186);+#10185 = CARTESIAN_POINT('',(0.124291879868,0.1));+#10186 = VECTOR('',#10187,1.);+#10187 = DIRECTION('',(-1.,-0.));+#10188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10189 = ORIENTED_EDGE('',*,*,#9285,.T.);+#10190 = ORIENTED_EDGE('',*,*,#10191,.F.);+#10191 = EDGE_CURVE('',#10192,#9263,#10194,.T.);+#10192 = VERTEX_POINT('',#10193);+#10193 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+    9.314404469578E-02));+#10194 = SURFACE_CURVE('',#10195,(#10199,#10206),.PCURVE_S1.);+#10195 = LINE('',#10196,#10197);+#10196 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+    9.314404469578E-02));+#10197 = VECTOR('',#10198,1.);+#10198 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#10199 = PCURVE('',#8509,#10200);+#10200 = DEFINITIONAL_REPRESENTATION('',(#10201),#10205);+#10201 = LINE('',#10202,#10203);+#10202 = CARTESIAN_POINT('',(0.343079345815,-1.324999999994));+#10203 = VECTOR('',#10204,1.);+#10204 = DIRECTION('',(0.906183139987,-0.422885465348));+#10205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10206 = PCURVE('',#3678,#10207);+#10207 = DEFINITIONAL_REPRESENTATION('',(#10208),#10212);+#10208 = LINE('',#10209,#10210);+#10209 = CARTESIAN_POINT('',(-4.470391181211E-12,0.));+#10210 = VECTOR('',#10211,1.);+#10211 = DIRECTION('',(1.,0.));+#10212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10213 = ORIENTED_EDGE('',*,*,#10214,.T.);+#10214 = EDGE_CURVE('',#10192,#10215,#10217,.T.);+#10215 = VERTEX_POINT('',#10216);+#10216 = CARTESIAN_POINT('',(3.29946203942,1.560692661501,+    9.314404469578E-02));+#10217 = SURFACE_CURVE('',#10218,(#10222,#10229),.PCURVE_S1.);+#10218 = LINE('',#10219,#10220);+#10219 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+    9.314404469578E-02));+#10220 = VECTOR('',#10221,1.);+#10221 = DIRECTION('',(-1.,0.,0.));+#10222 = PCURVE('',#8509,#10223);+#10223 = DEFINITIONAL_REPRESENTATION('',(#10224),#10228);+#10224 = LINE('',#10225,#10226);+#10225 = CARTESIAN_POINT('',(0.343079345815,-1.324999999994));+#10226 = VECTOR('',#10227,1.);+#10227 = DIRECTION('',(-1.,0.));+#10228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10229 = PCURVE('',#3811,#10230);+#10230 = DEFINITIONAL_REPRESENTATION('',(#10231),#10235);+#10231 = LINE('',#10232,#10233);+#10232 = CARTESIAN_POINT('',(-6.61700028104E-09,0.));+#10233 = VECTOR('',#10234,1.);+#10234 = DIRECTION('',(1.,0.));+#10235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10236 = ORIENTED_EDGE('',*,*,#10237,.F.);+#10237 = EDGE_CURVE('',#10238,#10215,#10240,.T.);+#10238 = VERTEX_POINT('',#10239);+#10239 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,+    9.314404469578E-02));+#10240 = SURFACE_CURVE('',#10241,(#10245,#10252),.PCURVE_S1.);+#10241 = LINE('',#10242,#10243);+#10242 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,+    9.314404469578E-02));+#10243 = VECTOR('',#10244,1.);+#10244 = DIRECTION('',(0.,-1.,0.));+#10245 = PCURVE('',#8509,#10246);+#10246 = DEFINITIONAL_REPRESENTATION('',(#10247),#10251);+#10247 = LINE('',#10248,#10249);+#10248 = CARTESIAN_POINT('',(0.218079345812,-1.074999999998));+#10249 = VECTOR('',#10250,1.);+#10250 = DIRECTION('',(0.,-1.));+#10251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10252 = PCURVE('',#3785,#10253);+#10253 = DEFINITIONAL_REPRESENTATION('',(#10254),#10258);+#10254 = LINE('',#10255,#10256);+#10255 = CARTESIAN_POINT('',(1.99995575656E-12,0.));+#10256 = VECTOR('',#10257,1.);+#10257 = DIRECTION('',(1.,0.));+#10258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10259 = ORIENTED_EDGE('',*,*,#10260,.T.);+#10260 = EDGE_CURVE('',#10238,#10261,#10263,.T.);+#10261 = VERTEX_POINT('',#10262);+#10262 = CARTESIAN_POINT('',(3.424462039423,1.810692661497,+    9.314404469578E-02));+#10263 = SURFACE_CURVE('',#10264,(#10268,#10275),.PCURVE_S1.);+#10264 = LINE('',#10265,#10266);+#10265 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,+    9.314404469578E-02));+#10266 = VECTOR('',#10267,1.);+#10267 = DIRECTION('',(1.,0.,0.));+#10268 = PCURVE('',#8509,#10269);+#10269 = DEFINITIONAL_REPRESENTATION('',(#10270),#10274);+#10270 = LINE('',#10271,#10272);+#10271 = CARTESIAN_POINT('',(0.218079345812,-1.074999999998));+#10272 = VECTOR('',#10273,1.);+#10273 = DIRECTION('',(1.,0.));+#10274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10275 = PCURVE('',#3757,#10276);+#10276 = DEFINITIONAL_REPRESENTATION('',(#10277),#10281);+#10277 = LINE('',#10278,#10279);+#10278 = CARTESIAN_POINT('',(-4.9999999992E-02,0.));+#10279 = VECTOR('',#10280,1.);+#10280 = DIRECTION('',(1.,0.));+#10281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10282 = ORIENTED_EDGE('',*,*,#10283,.F.);+#10283 = EDGE_CURVE('',#9218,#10261,#10284,.T.);+#10284 = SURFACE_CURVE('',#10285,(#10289,#10296),.PCURVE_S1.);+#10285 = LINE('',#10286,#10287);+#10286 = CARTESIAN_POINT('',(3.5,1.845943709768,9.314404469578E-02));+#10287 = VECTOR('',#10288,1.);+#10288 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#10289 = PCURVE('',#8509,#10290);+#10290 = DEFINITIONAL_REPRESENTATION('',(#10291),#10295);+#10291 = LINE('',#10292,#10293);+#10292 = CARTESIAN_POINT('',(0.418617306392,-1.039748951727));+#10293 = VECTOR('',#10294,1.);+#10294 = DIRECTION('',(-0.906183139987,-0.422885465348));+#10295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10296 = PCURVE('',#3729,#10297);+#10297 = DEFINITIONAL_REPRESENTATION('',(#10298),#10302);+#10298 = LINE('',#10299,#10300);+#10299 = CARTESIAN_POINT('',(-5.9365546801E-04,0.));+#10300 = VECTOR('',#10301,1.);+#10301 = DIRECTION('',(1.,0.));+#10302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10303 = ORIENTED_EDGE('',*,*,#9217,.T.);+#10304 = ORIENTED_EDGE('',*,*,#10305,.T.);+#10305 = EDGE_CURVE('',#9190,#10306,#10308,.T.);+#10306 = VERTEX_POINT('',#10307);+#10307 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+    9.314404469578E-02));+#10308 = SURFACE_CURVE('',#10309,(#10313,#10320),.PCURVE_S1.);+#10309 = LINE('',#10310,#10311);+#10310 = CARTESIAN_POINT('',(3.5,1.895983918053,9.314404469578E-02));+#10311 = VECTOR('',#10312,1.);+#10312 = DIRECTION('',(-1.,0.,0.));+#10313 = PCURVE('',#8509,#10314);+#10314 = DEFINITIONAL_REPRESENTATION('',(#10315),#10319);+#10315 = LINE('',#10316,#10317);+#10316 = CARTESIAN_POINT('',(0.418617306392,-0.989708743442));+#10317 = VECTOR('',#10318,1.);+#10318 = DIRECTION('',(-1.,0.));+#10319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10320 = PCURVE('',#9205,#10321);+#10321 = DEFINITIONAL_REPRESENTATION('',(#10322),#10326);+#10322 = LINE('',#10323,#10324);+#10323 = CARTESIAN_POINT('',(6.0741328296E-02,0.1));+#10324 = VECTOR('',#10325,1.);+#10325 = DIRECTION('',(-1.,0.));+#10326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10327 = ORIENTED_EDGE('',*,*,#10328,.T.);+#10328 = EDGE_CURVE('',#10306,#10329,#10331,.T.);+#10329 = VERTEX_POINT('',#10330);+#10330 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+    9.314404469578E-02));+#10331 = SURFACE_CURVE('',#10332,(#10336,#10343),.PCURVE_S1.);+#10332 = LINE('',#10333,#10334);+#10333 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+    9.314404469578E-02));+#10334 = VECTOR('',#10335,1.);+#10335 = DIRECTION('',(0.,1.,0.));+#10336 = PCURVE('',#8509,#10337);+#10337 = DEFINITIONAL_REPRESENTATION('',(#10338),#10342);+#10338 = LINE('',#10339,#10340);+#10339 = CARTESIAN_POINT('',(0.368584098237,-0.989708743442));+#10340 = VECTOR('',#10341,1.);+#10341 = DIRECTION('',(0.,1.));+#10342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10343 = PCURVE('',#10344,#10349);+#10344 = PLANE('',#10345);+#10345 = AXIS2_PLACEMENT_3D('',#10346,#10347,#10348);+#10346 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,+    0.193144044696));+#10347 = DIRECTION('',(1.,0.,0.));+#10348 = DIRECTION('',(-0.,1.,0.));+#10349 = DEFINITIONAL_REPRESENTATION('',(#10350),#10354);+#10350 = LINE('',#10351,#10352);+#10351 = CARTESIAN_POINT('',(1.747592270345,-0.1));+#10352 = VECTOR('',#10353,1.);+#10353 = DIRECTION('',(1.,0.));+#10354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10355 = ORIENTED_EDGE('',*,*,#10356,.T.);+#10356 = EDGE_CURVE('',#10329,#9111,#10357,.T.);+#10357 = SURFACE_CURVE('',#10358,(#10362,#10369),.PCURVE_S1.);+#10358 = LINE('',#10359,#10360);+#10359 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+    9.314404469578E-02));+#10360 = VECTOR('',#10361,1.);+#10361 = DIRECTION('',(1.,0.,0.));+#10362 = PCURVE('',#8509,#10363);+#10363 = DEFINITIONAL_REPRESENTATION('',(#10364),#10368);+#10364 = LINE('',#10365,#10366);+#10365 = CARTESIAN_POINT('',(0.368584098237,-0.909708743443));+#10366 = VECTOR('',#10367,1.);+#10367 = DIRECTION('',(1.,0.));+#10368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10369 = PCURVE('',#9149,#10370);+#10370 = DEFINITIONAL_REPRESENTATION('',(#10371),#10375);+#10371 = LINE('',#10372,#10373);+#10372 = CARTESIAN_POINT('',(0.124291879868,0.1));+#10373 = VECTOR('',#10374,1.);+#10374 = DIRECTION('',(-1.,-0.));+#10375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10376 = ORIENTED_EDGE('',*,*,#9110,.T.);+#10377 = ORIENTED_EDGE('',*,*,#10378,.F.);+#10378 = EDGE_CURVE('',#10379,#9088,#10381,.T.);+#10379 = VERTEX_POINT('',#10380);+#10380 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+    9.314404469578E-02));+#10381 = SURFACE_CURVE('',#10382,(#10386,#10393),.PCURVE_S1.);+#10382 = LINE('',#10383,#10384);+#10383 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+    9.314404469578E-02));+#10384 = VECTOR('',#10385,1.);+#10385 = DIRECTION('',(0.906183139987,-0.422885465349,0.));+#10386 = PCURVE('',#8509,#10387);+#10387 = DEFINITIONAL_REPRESENTATION('',(#10388),#10392);+#10388 = LINE('',#10389,#10390);+#10389 = CARTESIAN_POINT('',(0.343079339198,-0.824999999993));+#10390 = VECTOR('',#10391,1.);+#10391 = DIRECTION('',(0.906183139987,-0.422885465349));+#10392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10393 = PCURVE('',#3563,#10394);+#10394 = DEFINITIONAL_REPRESENTATION('',(#10395),#10399);+#10395 = LINE('',#10396,#10397);+#10396 = CARTESIAN_POINT('',(8.276473409007E-02,0.));+#10397 = VECTOR('',#10398,1.);+#10398 = DIRECTION('',(-1.,0.));+#10399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10400 = ORIENTED_EDGE('',*,*,#10401,.T.);+#10401 = EDGE_CURVE('',#10379,#10402,#10404,.T.);+#10402 = VERTEX_POINT('',#10403);+#10403 = CARTESIAN_POINT('',(3.29946203942,2.060692661502,+    9.314404469578E-02));+#10404 = SURFACE_CURVE('',#10405,(#10409,#10416),.PCURVE_S1.);+#10405 = LINE('',#10406,#10407);+#10406 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+    9.314404469578E-02));+#10407 = VECTOR('',#10408,1.);+#10408 = DIRECTION('',(-1.,0.,0.));+#10409 = PCURVE('',#8509,#10410);+#10410 = DEFINITIONAL_REPRESENTATION('',(#10411),#10415);+#10411 = LINE('',#10412,#10413);+#10412 = CARTESIAN_POINT('',(0.343079339198,-0.824999999993));+#10413 = VECTOR('',#10414,1.);+#10414 = DIRECTION('',(-1.,0.));+#10415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10416 = PCURVE('',#3535,#10417);+#10417 = DEFINITIONAL_REPRESENTATION('',(#10418),#10422);+#10418 = LINE('',#10419,#10420);+#10419 = CARTESIAN_POINT('',(0.,0.));+#10420 = VECTOR('',#10421,1.);+#10421 = DIRECTION('',(1.,0.));+#10422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10423 = ORIENTED_EDGE('',*,*,#10424,.F.);+#10424 = EDGE_CURVE('',#10425,#10402,#10427,.T.);+#10425 = VERTEX_POINT('',#10426);+#10426 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,+    9.314404469578E-02));+#10427 = SURFACE_CURVE('',#10428,(#10432,#10439),.PCURVE_S1.);+#10428 = LINE('',#10429,#10430);+#10429 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,+    9.314404469578E-02));+#10430 = VECTOR('',#10431,1.);+#10431 = DIRECTION('',(2.026728773275E-04,-0.999999979462,0.));+#10432 = PCURVE('',#8509,#10433);+#10433 = DEFINITIONAL_REPRESENTATION('',(#10434),#10438);+#10434 = LINE('',#10435,#10436);+#10435 = CARTESIAN_POINT('',(0.218038830115,-0.625093151387));+#10436 = VECTOR('',#10437,1.);+#10437 = DIRECTION('',(2.026728773275E-04,-0.999999979462));+#10438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10439 = PCURVE('',#3507,#10440);+#10440 = DEFINITIONAL_REPRESENTATION('',(#10441),#10445);+#10441 = LINE('',#10442,#10443);+#10442 = CARTESIAN_POINT('',(0.,0.));+#10443 = VECTOR('',#10444,1.);+#10444 = DIRECTION('',(1.,0.));+#10445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10446 = ORIENTED_EDGE('',*,*,#10447,.F.);+#10447 = EDGE_CURVE('',#10448,#10425,#10450,.T.);+#10448 = VERTEX_POINT('',#10449);+#10449 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+    9.314404469578E-02));+#10450 = SURFACE_CURVE('',#10451,(#10455,#10462),.PCURVE_S1.);+#10451 = LINE('',#10452,#10453);+#10452 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+    9.314404469578E-02));+#10453 = VECTOR('',#10454,1.);+#10454 = DIRECTION('',(1.,0.,0.));+#10455 = PCURVE('',#8509,#10456);+#10456 = DEFINITIONAL_REPRESENTATION('',(#10457),#10461);+#10457 = LINE('',#10458,#10459);+#10458 = CARTESIAN_POINT('',(-0.781920654192,-0.625093151387));+#10459 = VECTOR('',#10460,1.);+#10460 = DIRECTION('',(1.,0.));+#10461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10462 = PCURVE('',#3479,#10463);+#10463 = DEFINITIONAL_REPRESENTATION('',(#10464),#10468);+#10464 = LINE('',#10465,#10466);+#10465 = CARTESIAN_POINT('',(0.,0.));+#10466 = VECTOR('',#10467,1.);+#10467 = DIRECTION('',(1.,0.));+#10468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10469 = ORIENTED_EDGE('',*,*,#10470,.F.);+#10470 = EDGE_CURVE('',#10471,#10448,#10473,.T.);+#10471 = VERTEX_POINT('',#10472);+#10472 = CARTESIAN_POINT('',(2.199462039413,2.160599510114,+    9.314404469578E-02));+#10473 = SURFACE_CURVE('',#10474,(#10479,#10490),.PCURVE_S1.);+#10474 = CIRCLE('',#10475,0.100000000003);+#10475 = AXIS2_PLACEMENT_3D('',#10476,#10477,#10478);+#10476 = CARTESIAN_POINT('',(2.299462039416,2.160599510105,+    9.314404469578E-02));+#10477 = DIRECTION('',(0.,0.,-1.));+#10478 = DIRECTION('',(-1.,8.970602038714E-11,0.));+#10479 = PCURVE('',#8509,#10480);+#10480 = DEFINITIONAL_REPRESENTATION('',(#10481),#10489);+#10481 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10482,#10483,#10484,#10485+    ,#10486,#10487,#10488),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#10482 = CARTESIAN_POINT('',(-0.881920654195,-0.725093151381));+#10483 = CARTESIAN_POINT('',(-0.881920654179,-0.551888070619));+#10484 = CARTESIAN_POINT('',(-0.731920654183,-0.638490611013));+#10485 = CARTESIAN_POINT('',(-0.581920654186,-0.725093151408));+#10486 = CARTESIAN_POINT('',(-0.731920654198,-0.811695691776));+#10487 = CARTESIAN_POINT('',(-0.881920654211,-0.898298232143));+#10488 = CARTESIAN_POINT('',(-0.881920654195,-0.725093151381));+#10489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10490 = PCURVE('',#3451,#10491);+#10491 = DEFINITIONAL_REPRESENTATION('',(#10492),#10496);+#10492 = LINE('',#10493,#10494);+#10493 = CARTESIAN_POINT('',(3.14159265365,0.));+#10494 = VECTOR('',#10495,1.);+#10495 = DIRECTION('',(1.,0.));+#10496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10497 = ORIENTED_EDGE('',*,*,#10498,.F.);+#10498 = EDGE_CURVE('',#10499,#10471,#10501,.T.);+#10499 = VERTEX_POINT('',#10500);+#10500 = CARTESIAN_POINT('',(2.199462039417,0.310692661587,+    9.314404469578E-02));+#10501 = SURFACE_CURVE('',#10502,(#10506,#10513),.PCURVE_S1.);+#10502 = LINE('',#10503,#10504);+#10503 = CARTESIAN_POINT('',(2.199462039417,0.310692661587,+    9.314404469578E-02));+#10504 = VECTOR('',#10505,1.);+#10505 = DIRECTION('',(-2.088284628802E-12,1.,0.));+#10506 = PCURVE('',#8509,#10507);+#10507 = DEFINITIONAL_REPRESENTATION('',(#10508),#10512);+#10508 = LINE('',#10509,#10510);+#10509 = CARTESIAN_POINT('',(-0.881920654191,-2.574999999908));+#10510 = VECTOR('',#10511,1.);+#10511 = DIRECTION('',(-2.088284628802E-12,1.));+#10512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10513 = PCURVE('',#3418,#10514);+#10514 = DEFINITIONAL_REPRESENTATION('',(#10515),#10519);+#10515 = LINE('',#10516,#10517);+#10516 = CARTESIAN_POINT('',(3.199995823877E-11,0.));+#10517 = VECTOR('',#10518,1.);+#10518 = DIRECTION('',(1.,0.));+#10519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10520 = ORIENTED_EDGE('',*,*,#10521,.F.);+#10521 = EDGE_CURVE('',#10522,#10499,#10524,.T.);+#10522 = VERTEX_POINT('',#10523);+#10523 = CARTESIAN_POINT('',(2.299462039513,0.210692661562,+    9.314404469578E-02));+#10524 = SURFACE_CURVE('',#10525,(#10530,#10541),.PCURVE_S1.);+#10525 = CIRCLE('',#10526,9.999999999127E-02);+#10526 = AXIS2_PLACEMENT_3D('',#10527,#10528,#10529);+#10527 = CARTESIAN_POINT('',(2.299462039416,0.310692661553,+    9.314404469578E-02));+#10528 = DIRECTION('',(0.,0.,-1.));+#10529 = DIRECTION('',(9.686340619332E-10,-1.,0.));+#10530 = PCURVE('',#8509,#10531);+#10531 = DEFINITIONAL_REPRESENTATION('',(#10532),#10540);+#10532 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10533,#10534,#10535,#10536+    ,#10537,#10538,#10539),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#10533 = CARTESIAN_POINT('',(-0.781920654095,-2.674999999933));+#10534 = CARTESIAN_POINT('',(-0.955125734837,-2.675000000101));+#10535 = CARTESIAN_POINT('',(-0.868523194611,-2.52500000003));+#10536 = CARTESIAN_POINT('',(-0.781920654386,-2.374999999959));+#10537 = CARTESIAN_POINT('',(-0.69531811387,-2.524999999862));+#10538 = CARTESIAN_POINT('',(-0.608715573353,-2.674999999765));+#10539 = CARTESIAN_POINT('',(-0.781920654095,-2.674999999933));+#10540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10541 = PCURVE('',#3390,#10542);+#10542 = DEFINITIONAL_REPRESENTATION('',(#10543),#10547);+#10543 = LINE('',#10544,#10545);+#10544 = CARTESIAN_POINT('',(3.141592652621,0.));+#10545 = VECTOR('',#10546,1.);+#10546 = DIRECTION('',(1.,0.));+#10547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10548 = ORIENTED_EDGE('',*,*,#10549,.F.);+#10549 = EDGE_CURVE('',#10550,#10522,#10552,.T.);+#10550 = VERTEX_POINT('',#10551);+#10551 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,+    9.314404469578E-02));+#10552 = SURFACE_CURVE('',#10553,(#10557,#10564),.PCURVE_S1.);+#10553 = LINE('',#10554,#10555);+#10554 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,+    9.314404469578E-02));+#10555 = VECTOR('',#10556,1.);+#10556 = DIRECTION('',(-1.,5.593553398402E-11,0.));+#10557 = PCURVE('',#8509,#10558);+#10558 = DEFINITIONAL_REPRESENTATION('',(#10559),#10563);+#10559 = LINE('',#10560,#10561);+#10560 = CARTESIAN_POINT('',(0.218079345812,-2.674999999997));+#10561 = VECTOR('',#10562,1.);+#10562 = DIRECTION('',(-1.,5.593553398402E-11));+#10563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10564 = PCURVE('',#3357,#10565);+#10565 = DEFINITIONAL_REPRESENTATION('',(#10566),#10570);+#10566 = LINE('',#10567,#10568);+#10567 = CARTESIAN_POINT('',(0.,0.));+#10568 = VECTOR('',#10569,1.);+#10569 = DIRECTION('',(1.,0.));+#10570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10571 = ORIENTED_EDGE('',*,*,#10572,.F.);+#10572 = EDGE_CURVE('',#10573,#10550,#10575,.T.);+#10573 = VERTEX_POINT('',#10574);+#10574 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,+    9.314404469578E-02));+#10575 = SURFACE_CURVE('',#10576,(#10580,#10587),.PCURVE_S1.);+#10576 = LINE('',#10577,#10578);+#10577 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,+    9.314404469578E-02));+#10578 = VECTOR('',#10579,1.);+#10579 = DIRECTION('',(0.,-1.,0.));+#10580 = PCURVE('',#8509,#10581);+#10581 = DEFINITIONAL_REPRESENTATION('',(#10582),#10586);+#10582 = LINE('',#10583,#10584);+#10583 = CARTESIAN_POINT('',(0.218079345812,-2.574999999994));+#10584 = VECTOR('',#10585,1.);+#10585 = DIRECTION('',(0.,-1.));+#10586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10587 = PCURVE('',#3329,#10588);+#10588 = DEFINITIONAL_REPRESENTATION('',(#10589),#10593);+#10589 = LINE('',#10590,#10591);+#10590 = CARTESIAN_POINT('',(-2.999989145991E-12,0.));+#10591 = VECTOR('',#10592,1.);+#10592 = DIRECTION('',(1.,0.));+#10593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10594 = ORIENTED_EDGE('',*,*,#10595,.T.);+#10595 = EDGE_CURVE('',#10573,#10596,#10598,.T.);+#10596 = VERTEX_POINT('',#10597);+#10597 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,+    9.314404469578E-02));+#10598 = SURFACE_CURVE('',#10599,(#10603,#10610),.PCURVE_S1.);+#10599 = LINE('',#10600,#10601);+#10600 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,+    9.314404469578E-02));+#10601 = VECTOR('',#10602,1.);+#10602 = DIRECTION('',(1.,0.,0.));+#10603 = PCURVE('',#8509,#10604);+#10604 = DEFINITIONAL_REPRESENTATION('',(#10605),#10609);+#10605 = LINE('',#10606,#10607);+#10606 = CARTESIAN_POINT('',(0.218079345812,-2.574999999994));+#10607 = VECTOR('',#10608,1.);+#10608 = DIRECTION('',(1.,0.));+#10609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10610 = PCURVE('',#3301,#10611);+#10611 = DEFINITIONAL_REPRESENTATION('',(#10612),#10616);+#10612 = LINE('',#10613,#10614);+#10613 = CARTESIAN_POINT('',(-4.9999993389E-02,0.));+#10614 = VECTOR('',#10615,1.);+#10615 = DIRECTION('',(1.,0.));+#10616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10617 = ORIENTED_EDGE('',*,*,#10618,.F.);+#10618 = EDGE_CURVE('',#8492,#10596,#10619,.T.);+#10619 = SURFACE_CURVE('',#10620,(#10624,#10631),.PCURVE_S1.);+#10620 = LINE('',#10621,#10622);+#10621 = CARTESIAN_POINT('',(3.5,0.345943712857,9.314404469578E-02));+#10622 = VECTOR('',#10623,1.);+#10623 = DIRECTION('',(-0.906183139998,-0.422885465325,0.));+#10624 = PCURVE('',#8509,#10625);+#10625 = DEFINITIONAL_REPRESENTATION('',(#10626),#10630);+#10626 = LINE('',#10627,#10628);+#10627 = CARTESIAN_POINT('',(0.418617306392,-2.539748948638));+#10628 = VECTOR('',#10629,1.);+#10629 = DIRECTION('',(-0.906183139998,-0.422885465325));+#10630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10631 = PCURVE('',#3273,#10632);+#10632 = DEFINITIONAL_REPRESENTATION('',(#10633),#10637);+#10633 = LINE('',#10634,#10635);+#10634 = CARTESIAN_POINT('',(8.335838955681E-02,0.));+#10635 = VECTOR('',#10636,1.);+#10636 = DIRECTION('',(-1.,0.));+#10637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10638 = ADVANCED_FACE('',(#10639),#8946,.F.);+#10639 = FACE_BOUND('',#10640,.F.);+#10640 = EDGE_LOOP('',(#10641,#10642,#10665,#10693,#10714,#10715,#10738,+    #10761,#10789,#10812));+#10641 = ORIENTED_EDGE('',*,*,#9042,.T.);+#10642 = ORIENTED_EDGE('',*,*,#10643,.F.);+#10643 = EDGE_CURVE('',#10644,#9015,#10646,.T.);+#10644 = VERTEX_POINT('',#10645);+#10645 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+    9.314404469578E-02));+#10646 = SURFACE_CURVE('',#10647,(#10651,#10658),.PCURVE_S1.);+#10647 = LINE('',#10648,#10649);+#10648 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+    9.314404469578E-02));+#10649 = VECTOR('',#10650,1.);+#10650 = DIRECTION('',(1.,0.,0.));+#10651 = PCURVE('',#8946,#10652);+#10652 = DEFINITIONAL_REPRESENTATION('',(#10653),#10657);+#10653 = LINE('',#10654,#10655);+#10654 = CARTESIAN_POINT('',(0.368584098237,-3.9708744994E-02));+#10655 = VECTOR('',#10656,1.);+#10656 = DIRECTION('',(1.,0.));+#10657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10658 = PCURVE('',#9030,#10659);+#10659 = DEFINITIONAL_REPRESENTATION('',(#10660),#10664);+#10660 = LINE('',#10661,#10662);+#10661 = CARTESIAN_POINT('',(1.0708116849E-02,0.1));+#10662 = VECTOR('',#10663,1.);+#10663 = DIRECTION('',(1.,0.));+#10664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10665 = ORIENTED_EDGE('',*,*,#10666,.T.);+#10666 = EDGE_CURVE('',#10644,#10667,#10669,.T.);+#10667 = VERTEX_POINT('',#10668);+#10668 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+    9.314404469578E-02));+#10669 = SURFACE_CURVE('',#10670,(#10674,#10681),.PCURVE_S1.);+#10670 = LINE('',#10671,#10672);+#10671 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+    9.314404469578E-02));+#10672 = VECTOR('',#10673,1.);+#10673 = DIRECTION('',(0.,1.,0.));+#10674 = PCURVE('',#8946,#10675);+#10675 = DEFINITIONAL_REPRESENTATION('',(#10676),#10680);+#10676 = LINE('',#10677,#10678);+#10677 = CARTESIAN_POINT('',(0.368584098237,-3.9708744994E-02));+#10678 = VECTOR('',#10679,1.);+#10679 = DIRECTION('',(0.,1.));+#10680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10681 = PCURVE('',#10682,#10687);+#10682 = PLANE('',#10683);+#10683 = AXIS2_PLACEMENT_3D('',#10684,#10685,#10686);+#10684 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,+    0.193144044696));+#10685 = DIRECTION('',(1.,0.,0.));+#10686 = DIRECTION('',(-0.,1.,0.));+#10687 = DEFINITIONAL_REPRESENTATION('',(#10688),#10692);+#10688 = LINE('',#10689,#10690);+#10689 = CARTESIAN_POINT('',(2.697592268793,-0.1));+#10690 = VECTOR('',#10691,1.);+#10691 = DIRECTION('',(1.,0.));+#10692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10693 = ORIENTED_EDGE('',*,*,#10694,.T.);+#10694 = EDGE_CURVE('',#10667,#8931,#10695,.T.);+#10695 = SURFACE_CURVE('',#10696,(#10700,#10707),.PCURVE_S1.);+#10696 = LINE('',#10697,#10698);+#10697 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+    9.314404469578E-02));+#10698 = VECTOR('',#10699,1.);+#10699 = DIRECTION('',(1.,0.,0.));+#10700 = PCURVE('',#8946,#10701);+#10701 = DEFINITIONAL_REPRESENTATION('',(#10702),#10706);+#10702 = LINE('',#10703,#10704);+#10703 = CARTESIAN_POINT('',(0.368584098237,4.0291255008E-02));+#10704 = VECTOR('',#10705,1.);+#10705 = DIRECTION('',(1.,0.));+#10706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10707 = PCURVE('',#8974,#10708);+#10708 = DEFINITIONAL_REPRESENTATION('',(#10709),#10713);+#10709 = LINE('',#10710,#10711);+#10710 = CARTESIAN_POINT('',(0.12429188316,0.1));+#10711 = VECTOR('',#10712,1.);+#10712 = DIRECTION('',(-1.,-0.));+#10713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10714 = ORIENTED_EDGE('',*,*,#8930,.T.);+#10715 = ORIENTED_EDGE('',*,*,#10716,.F.);+#10716 = EDGE_CURVE('',#10717,#8908,#10719,.T.);+#10717 = VERTEX_POINT('',#10718);+#10718 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+    9.314404469578E-02));+#10719 = SURFACE_CURVE('',#10720,(#10724,#10731),.PCURVE_S1.);+#10720 = LINE('',#10721,#10722);+#10721 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+    9.314404469578E-02));+#10722 = VECTOR('',#10723,1.);+#10723 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#10724 = PCURVE('',#8946,#10725);+#10725 = DEFINITIONAL_REPRESENTATION('',(#10726),#10730);+#10726 = LINE('',#10727,#10728);+#10727 = CARTESIAN_POINT('',(0.343079345819,0.125000000001));+#10728 = VECTOR('',#10729,1.);+#10729 = DIRECTION('',(0.906183139998,-0.422885465325));+#10730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10731 = PCURVE('',#1105,#10732);+#10732 = DEFINITIONAL_REPRESENTATION('',(#10733),#10737);+#10733 = LINE('',#10734,#10735);+#10734 = CARTESIAN_POINT('',(8.276472678267E-02,0.));+#10735 = VECTOR('',#10736,1.);+#10736 = DIRECTION('',(-1.,0.));+#10737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10738 = ORIENTED_EDGE('',*,*,#10739,.T.);+#10739 = EDGE_CURVE('',#10717,#10740,#10742,.T.);+#10740 = VERTEX_POINT('',#10741);+#10741 = CARTESIAN_POINT('',(2.724462046023,3.010692661495,+    9.314404469578E-02));+#10742 = SURFACE_CURVE('',#10743,(#10747,#10754),.PCURVE_S1.);+#10743 = LINE('',#10744,#10745);+#10744 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+    9.314404469578E-02));+#10745 = VECTOR('',#10746,1.);+#10746 = DIRECTION('',(-1.,-4.846916564568E-13,0.));+#10747 = PCURVE('',#8946,#10748);+#10748 = DEFINITIONAL_REPRESENTATION('',(#10749),#10753);+#10749 = LINE('',#10750,#10751);+#10750 = CARTESIAN_POINT('',(0.343079345819,0.125000000001));+#10751 = VECTOR('',#10752,1.);+#10752 = DIRECTION('',(-1.,-4.846916564568E-13));+#10753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10754 = PCURVE('',#1077,#10755);+#10755 = DEFINITIONAL_REPRESENTATION('',(#10756),#10760);+#10756 = LINE('',#10757,#10758);+#10757 = CARTESIAN_POINT('',(0.,0.));+#10758 = VECTOR('',#10759,1.);+#10759 = DIRECTION('',(1.,0.));+#10760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10761 = ORIENTED_EDGE('',*,*,#10762,.F.);+#10762 = EDGE_CURVE('',#10763,#10740,#10765,.T.);+#10763 = VERTEX_POINT('',#10764);+#10764 = CARTESIAN_POINT('',(2.724462045976,2.760692661495,+    9.314404469578E-02));+#10765 = SURFACE_CURVE('',#10766,(#10771,#10782),.PCURVE_S1.);+#10766 = CIRCLE('',#10767,0.125);+#10767 = AXIS2_PLACEMENT_3D('',#10768,#10769,#10770);+#10768 = CARTESIAN_POINT('',(2.724462046015,2.885692661495,+    9.314404469578E-02));+#10769 = DIRECTION('',(0.,0.,-1.));+#10770 = DIRECTION('',(-3.070184106946E-10,-1.,-0.));+#10771 = PCURVE('',#8946,#10772);+#10772 = DEFINITIONAL_REPRESENTATION('',(#10773),#10781);+#10773 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10774,#10775,#10776,#10777+    ,#10778,#10779,#10780),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#10774 = CARTESIAN_POINT('',(-0.356920647631,-0.125));+#10775 = CARTESIAN_POINT('',(-0.573426998577,-0.124999999934));+#10776 = CARTESIAN_POINT('',(-0.465173823047,6.250000003324E-02));+#10777 = CARTESIAN_POINT('',(-0.356920647516,0.25));+#10778 = CARTESIAN_POINT('',(-0.248667472101,6.249999996676E-02));+#10779 = CARTESIAN_POINT('',(-0.140414296685,-0.125000000066));+#10780 = CARTESIAN_POINT('',(-0.356920647631,-0.125));+#10781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10782 = PCURVE('',#1049,#10783);+#10783 = DEFINITIONAL_REPRESENTATION('',(#10784),#10788);+#10784 = LINE('',#10785,#10786);+#10785 = CARTESIAN_POINT('',(0.,0.));+#10786 = VECTOR('',#10787,1.);+#10787 = DIRECTION('',(1.,0.));+#10788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10789 = ORIENTED_EDGE('',*,*,#10790,.T.);+#10790 = EDGE_CURVE('',#10763,#10791,#10793,.T.);+#10791 = VERTEX_POINT('',#10792);+#10792 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,+    9.314404469578E-02));+#10793 = SURFACE_CURVE('',#10794,(#10798,#10805),.PCURVE_S1.);+#10794 = LINE('',#10795,#10796);+#10795 = CARTESIAN_POINT('',(2.724462046002,2.760692661498,+    9.314404469578E-02));+#10796 = VECTOR('',#10797,1.);+#10797 = DIRECTION('',(1.,2.217908417455E-12,0.));+#10798 = PCURVE('',#8946,#10799);+#10799 = DEFINITIONAL_REPRESENTATION('',(#10800),#10804);+#10800 = LINE('',#10801,#10802);+#10801 = CARTESIAN_POINT('',(-0.356920647606,-0.124999999997));+#10802 = VECTOR('',#10803,1.);+#10803 = DIRECTION('',(1.,2.217908417455E-12));+#10804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10805 = PCURVE('',#3640,#10806);+#10806 = DEFINITIONAL_REPRESENTATION('',(#10807),#10811);+#10807 = LINE('',#10808,#10809);+#10808 = CARTESIAN_POINT('',(-0.624999986807,0.));+#10809 = VECTOR('',#10810,1.);+#10810 = DIRECTION('',(1.,0.));+#10811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10812 = ORIENTED_EDGE('',*,*,#10813,.F.);+#10813 = EDGE_CURVE('',#9043,#10791,#10814,.T.);+#10814 = SURFACE_CURVE('',#10815,(#10819,#10826),.PCURVE_S1.);+#10815 = LINE('',#10816,#10817);+#10816 = CARTESIAN_POINT('',(3.5,2.795943709766,9.314404469578E-02));+#10817 = VECTOR('',#10818,1.);+#10818 = DIRECTION('',(-0.906183139998,-0.422885465325,0.));+#10819 = PCURVE('',#8946,#10820);+#10820 = DEFINITIONAL_REPRESENTATION('',(#10821),#10825);+#10821 = LINE('',#10822,#10823);+#10822 = CARTESIAN_POINT('',(0.418617306392,-8.9748951729E-02));+#10823 = VECTOR('',#10824,1.);+#10824 = DIRECTION('',(-0.906183139998,-0.422885465325));+#10825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10826 = PCURVE('',#3614,#10827);+#10827 = DEFINITIONAL_REPRESENTATION('',(#10828),#10832);+#10828 = LINE('',#10829,#10830);+#10829 = CARTESIAN_POINT('',(8.335838225068E-02,0.));+#10830 = VECTOR('',#10831,1.);+#10831 = DIRECTION('',(-1.,0.));+#10832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10833 = ADVANCED_FACE('',(#10834),#9728,.T.);+#10834 = FACE_BOUND('',#10835,.F.);+#10835 = EDGE_LOOP('',(#10836,#10837,#10860,#10881));+#10836 = ORIENTED_EDGE('',*,*,#9714,.F.);+#10837 = ORIENTED_EDGE('',*,*,#10838,.F.);+#10838 = EDGE_CURVE('',#10839,#9687,#10841,.T.);+#10839 = VERTEX_POINT('',#10840);+#10840 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+    0.193144044696));+#10841 = SURFACE_CURVE('',#10842,(#10846,#10853),.PCURVE_S1.);+#10842 = LINE('',#10843,#10844);+#10843 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+    0.193144044696));+#10844 = VECTOR('',#10845,1.);+#10845 = DIRECTION('',(1.,0.,0.));+#10846 = PCURVE('',#9728,#10847);+#10847 = DEFINITIONAL_REPRESENTATION('',(#10848),#10852);+#10848 = LINE('',#10849,#10850);+#10849 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#10850 = VECTOR('',#10851,1.);+#10851 = DIRECTION('',(1.,0.));+#10852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10853 = PCURVE('',#9702,#10854);+#10854 = DEFINITIONAL_REPRESENTATION('',(#10855),#10859);+#10855 = LINE('',#10856,#10857);+#10856 = CARTESIAN_POINT('',(0.660870737389,-1.331483192395));+#10857 = VECTOR('',#10858,1.);+#10858 = DIRECTION('',(1.,0.));+#10859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10860 = ORIENTED_EDGE('',*,*,#10861,.T.);+#10861 = EDGE_CURVE('',#10839,#9745,#10862,.T.);+#10862 = SURFACE_CURVE('',#10863,(#10867,#10874),.PCURVE_S1.);+#10863 = LINE('',#10864,#10865);+#10864 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+    0.193144044696));+#10865 = VECTOR('',#10866,1.);+#10866 = DIRECTION('',(0.,0.,-1.));+#10867 = PCURVE('',#9728,#10868);+#10868 = DEFINITIONAL_REPRESENTATION('',(#10869),#10873);+#10869 = LINE('',#10870,#10871);+#10870 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#10871 = VECTOR('',#10872,1.);+#10872 = DIRECTION('',(0.,1.));+#10873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10874 = PCURVE('',#9783,#10875);+#10875 = DEFINITIONAL_REPRESENTATION('',(#10876),#10880);+#10876 = LINE('',#10877,#10878);+#10877 = CARTESIAN_POINT('',(0.247592270345,0.));+#10878 = VECTOR('',#10879,1.);+#10879 = DIRECTION('',(0.,-1.));+#10880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10881 = ORIENTED_EDGE('',*,*,#9744,.F.);+#10882 = ADVANCED_FACE('',(#10883),#9702,.F.);+#10883 = FACE_BOUND('',#10884,.F.);+#10884 = EDGE_LOOP('',(#10885,#10886,#10909,#10930));+#10885 = ORIENTED_EDGE('',*,*,#9686,.T.);+#10886 = ORIENTED_EDGE('',*,*,#10887,.F.);+#10887 = EDGE_CURVE('',#10888,#9659,#10890,.T.);+#10888 = VERTEX_POINT('',#10889);+#10889 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+    0.193144044696));+#10890 = SURFACE_CURVE('',#10891,(#10895,#10902),.PCURVE_S1.);+#10891 = LINE('',#10892,#10893);+#10892 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+    0.193144044696));+#10893 = VECTOR('',#10894,1.);+#10894 = DIRECTION('',(1.,0.,0.));+#10895 = PCURVE('',#9702,#10896);+#10896 = DEFINITIONAL_REPRESENTATION('',(#10897),#10901);+#10897 = LINE('',#10898,#10899);+#10898 = CARTESIAN_POINT('',(0.660870737389,-1.251483192393));+#10899 = VECTOR('',#10900,1.);+#10900 = DIRECTION('',(1.,0.));+#10901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10902 = PCURVE('',#9674,#10903);+#10903 = DEFINITIONAL_REPRESENTATION('',(#10904),#10908);+#10904 = LINE('',#10905,#10906);+#10905 = CARTESIAN_POINT('',(0.124291879868,0.));+#10906 = VECTOR('',#10907,1.);+#10907 = DIRECTION('',(-1.,-0.));+#10908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10909 = ORIENTED_EDGE('',*,*,#10910,.T.);+#10910 = EDGE_CURVE('',#10888,#10839,#10911,.T.);+#10911 = SURFACE_CURVE('',#10912,(#10916,#10923),.PCURVE_S1.);+#10912 = LINE('',#10913,#10914);+#10913 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+    0.193144044696));+#10914 = VECTOR('',#10915,1.);+#10915 = DIRECTION('',(0.,-1.,0.));+#10916 = PCURVE('',#9702,#10917);+#10917 = DEFINITIONAL_REPRESENTATION('',(#10918),#10922);+#10918 = LINE('',#10919,#10920);+#10919 = CARTESIAN_POINT('',(0.660870737389,-1.251483192393));+#10920 = VECTOR('',#10921,1.);+#10921 = DIRECTION('',(0.,-1.));+#10922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10923 = PCURVE('',#9783,#10924);+#10924 = DEFINITIONAL_REPRESENTATION('',(#10925),#10929);+#10925 = LINE('',#10926,#10927);+#10926 = CARTESIAN_POINT('',(0.327592270347,0.));+#10927 = VECTOR('',#10928,1.);+#10928 = DIRECTION('',(-1.,0.));+#10929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10930 = ORIENTED_EDGE('',*,*,#10838,.T.);+#10931 = ADVANCED_FACE('',(#10932),#9527,.F.);+#10932 = FACE_BOUND('',#10933,.F.);+#10933 = EDGE_LOOP('',(#10934,#10935,#10958,#10981));+#10934 = ORIENTED_EDGE('',*,*,#9511,.T.);+#10935 = ORIENTED_EDGE('',*,*,#10936,.T.);+#10936 = EDGE_CURVE('',#9484,#10937,#10939,.T.);+#10937 = VERTEX_POINT('',#10938);+#10938 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+    0.193144044696));+#10939 = SURFACE_CURVE('',#10940,(#10944,#10951),.PCURVE_S1.);+#10940 = LINE('',#10941,#10942);+#10941 = CARTESIAN_POINT('',(3.5,0.975983918052,0.193144044696));+#10942 = VECTOR('',#10943,1.);+#10943 = DIRECTION('',(-1.,0.,0.));+#10944 = PCURVE('',#9527,#10945);+#10945 = DEFINITIONAL_REPRESENTATION('',(#10946),#10950);+#10946 = LINE('',#10947,#10948);+#10947 = CARTESIAN_POINT('',(0.710903945544,-0.751483192396));+#10948 = VECTOR('',#10949,1.);+#10949 = DIRECTION('',(-1.,0.));+#10950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10951 = PCURVE('',#9499,#10952);+#10952 = DEFINITIONAL_REPRESENTATION('',(#10953),#10957);+#10953 = LINE('',#10954,#10955);+#10954 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#10955 = VECTOR('',#10956,1.);+#10956 = DIRECTION('',(1.,0.));+#10957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10958 = ORIENTED_EDGE('',*,*,#10959,.T.);+#10959 = EDGE_CURVE('',#10937,#10960,#10962,.T.);+#10960 = VERTEX_POINT('',#10961);+#10961 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,0.193144044696+    ));+#10962 = SURFACE_CURVE('',#10963,(#10967,#10974),.PCURVE_S1.);+#10963 = LINE('',#10964,#10965);+#10964 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+    0.193144044696));+#10965 = VECTOR('',#10966,1.);+#10966 = DIRECTION('',(0.,-1.,0.));+#10967 = PCURVE('',#9527,#10968);+#10968 = DEFINITIONAL_REPRESENTATION('',(#10969),#10973);+#10969 = LINE('',#10970,#10971);+#10970 = CARTESIAN_POINT('',(0.660870737389,-0.751483192396));+#10971 = VECTOR('',#10972,1.);+#10972 = DIRECTION('',(0.,-1.));+#10973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10974 = PCURVE('',#9970,#10975);+#10975 = DEFINITIONAL_REPRESENTATION('',(#10976),#10980);+#10976 = LINE('',#10977,#10978);+#10977 = CARTESIAN_POINT('',(0.827592270344,0.));+#10978 = VECTOR('',#10979,1.);+#10979 = DIRECTION('',(-1.,0.));+#10980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10981 = ORIENTED_EDGE('',*,*,#10982,.T.);+#10982 = EDGE_CURVE('',#10960,#9512,#10983,.T.);+#10983 = SURFACE_CURVE('',#10984,(#10988,#10995),.PCURVE_S1.);+#10984 = LINE('',#10985,#10986);+#10985 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,0.193144044696+    ));+#10986 = VECTOR('',#10987,1.);+#10987 = DIRECTION('',(1.,0.,0.));+#10988 = PCURVE('',#9527,#10989);+#10989 = DEFINITIONAL_REPRESENTATION('',(#10990),#10994);+#10990 = LINE('',#10991,#10992);+#10991 = CARTESIAN_POINT('',(0.660870737389,-0.831483192398));+#10992 = VECTOR('',#10993,1.);+#10993 = DIRECTION('',(1.,0.));+#10994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#10995 = PCURVE('',#9555,#10996);+#10996 = DEFINITIONAL_REPRESENTATION('',(#10997),#11001);+#10997 = LINE('',#10998,#10999);+#10998 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#10999 = VECTOR('',#11000,1.);+#11000 = DIRECTION('',(1.,0.));+#11001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11002 = ADVANCED_FACE('',(#11003),#9352,.F.);+#11003 = FACE_BOUND('',#11004,.F.);+#11004 = EDGE_LOOP('',(#11005,#11006,#11029,#11052));+#11005 = ORIENTED_EDGE('',*,*,#9336,.T.);+#11006 = ORIENTED_EDGE('',*,*,#11007,.T.);+#11007 = EDGE_CURVE('',#9309,#11008,#11010,.T.);+#11008 = VERTEX_POINT('',#11009);+#11009 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,0.193144044696+    ));+#11010 = SURFACE_CURVE('',#11011,(#11015,#11022),.PCURVE_S1.);+#11011 = LINE('',#11012,#11013);+#11012 = CARTESIAN_POINT('',(3.5,1.47598391805,0.193144044696));+#11013 = VECTOR('',#11014,1.);+#11014 = DIRECTION('',(-1.,0.,0.));+#11015 = PCURVE('',#9352,#11016);+#11016 = DEFINITIONAL_REPRESENTATION('',(#11017),#11021);+#11017 = LINE('',#11018,#11019);+#11018 = CARTESIAN_POINT('',(0.710903945544,-0.251483192398));+#11019 = VECTOR('',#11020,1.);+#11020 = DIRECTION('',(-1.,0.));+#11021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11022 = PCURVE('',#9324,#11023);+#11023 = DEFINITIONAL_REPRESENTATION('',(#11024),#11028);+#11024 = LINE('',#11025,#11026);+#11025 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#11026 = VECTOR('',#11027,1.);+#11027 = DIRECTION('',(1.,0.));+#11028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11029 = ORIENTED_EDGE('',*,*,#11030,.T.);+#11030 = EDGE_CURVE('',#11008,#11031,#11033,.T.);+#11031 = VERTEX_POINT('',#11032);+#11032 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+    0.193144044696));+#11033 = SURFACE_CURVE('',#11034,(#11038,#11045),.PCURVE_S1.);+#11034 = LINE('',#11035,#11036);+#11035 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,0.193144044696+    ));+#11036 = VECTOR('',#11037,1.);+#11037 = DIRECTION('',(0.,-1.,0.));+#11038 = PCURVE('',#9352,#11039);+#11039 = DEFINITIONAL_REPRESENTATION('',(#11040),#11044);+#11040 = LINE('',#11041,#11042);+#11041 = CARTESIAN_POINT('',(0.660870737389,-0.251483192398));+#11042 = VECTOR('',#11043,1.);+#11043 = DIRECTION('',(0.,-1.));+#11044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11045 = PCURVE('',#10157,#11046);+#11046 = DEFINITIONAL_REPRESENTATION('',(#11047),#11051);+#11047 = LINE('',#11048,#11049);+#11048 = CARTESIAN_POINT('',(1.327592270342,0.));+#11049 = VECTOR('',#11050,1.);+#11050 = DIRECTION('',(-1.,0.));+#11051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11052 = ORIENTED_EDGE('',*,*,#11053,.T.);+#11053 = EDGE_CURVE('',#11031,#9337,#11054,.T.);+#11054 = SURFACE_CURVE('',#11055,(#11059,#11066),.PCURVE_S1.);+#11055 = LINE('',#11056,#11057);+#11056 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+    0.193144044696));+#11057 = VECTOR('',#11058,1.);+#11058 = DIRECTION('',(1.,0.,0.));+#11059 = PCURVE('',#9352,#11060);+#11060 = DEFINITIONAL_REPRESENTATION('',(#11061),#11065);+#11061 = LINE('',#11062,#11063);+#11062 = CARTESIAN_POINT('',(0.660870737389,-0.331483192396));+#11063 = VECTOR('',#11064,1.);+#11064 = DIRECTION('',(1.,0.));+#11065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11066 = PCURVE('',#9380,#11067);+#11067 = DEFINITIONAL_REPRESENTATION('',(#11068),#11072);+#11068 = LINE('',#11069,#11070);+#11069 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11070 = VECTOR('',#11071,1.);+#11071 = DIRECTION('',(1.,0.));+#11072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11073 = ADVANCED_FACE('',(#11074),#9177,.F.);+#11074 = FACE_BOUND('',#11075,.F.);+#11075 = EDGE_LOOP('',(#11076,#11077,#11100,#11123));+#11076 = ORIENTED_EDGE('',*,*,#9161,.T.);+#11077 = ORIENTED_EDGE('',*,*,#11078,.T.);+#11078 = EDGE_CURVE('',#9134,#11079,#11081,.T.);+#11079 = VERTEX_POINT('',#11080);+#11080 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+    0.193144044696));+#11081 = SURFACE_CURVE('',#11082,(#11086,#11093),.PCURVE_S1.);+#11082 = LINE('',#11083,#11084);+#11083 = CARTESIAN_POINT('',(3.5,1.975983918052,0.193144044696));+#11084 = VECTOR('',#11085,1.);+#11085 = DIRECTION('',(-1.,0.,0.));+#11086 = PCURVE('',#9177,#11087);+#11087 = DEFINITIONAL_REPRESENTATION('',(#11088),#11092);+#11088 = LINE('',#11089,#11090);+#11089 = CARTESIAN_POINT('',(0.710903945544,0.248516807604));+#11090 = VECTOR('',#11091,1.);+#11091 = DIRECTION('',(-1.,0.));+#11092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11093 = PCURVE('',#9149,#11094);+#11094 = DEFINITIONAL_REPRESENTATION('',(#11095),#11099);+#11095 = LINE('',#11096,#11097);+#11096 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#11097 = VECTOR('',#11098,1.);+#11098 = DIRECTION('',(1.,0.));+#11099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11100 = ORIENTED_EDGE('',*,*,#11101,.T.);+#11101 = EDGE_CURVE('',#11079,#11102,#11104,.T.);+#11102 = VERTEX_POINT('',#11103);+#11103 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+    0.193144044696));+#11104 = SURFACE_CURVE('',#11105,(#11109,#11116),.PCURVE_S1.);+#11105 = LINE('',#11106,#11107);+#11106 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+    0.193144044696));+#11107 = VECTOR('',#11108,1.);+#11108 = DIRECTION('',(0.,-1.,0.));+#11109 = PCURVE('',#9177,#11110);+#11110 = DEFINITIONAL_REPRESENTATION('',(#11111),#11115);+#11111 = LINE('',#11112,#11113);+#11112 = CARTESIAN_POINT('',(0.660870737389,0.248516807604));+#11113 = VECTOR('',#11114,1.);+#11114 = DIRECTION('',(0.,-1.));+#11115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11116 = PCURVE('',#10344,#11117);+#11117 = DEFINITIONAL_REPRESENTATION('',(#11118),#11122);+#11118 = LINE('',#11119,#11120);+#11119 = CARTESIAN_POINT('',(1.827592270344,0.));+#11120 = VECTOR('',#11121,1.);+#11121 = DIRECTION('',(-1.,0.));+#11122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11123 = ORIENTED_EDGE('',*,*,#11124,.T.);+#11124 = EDGE_CURVE('',#11102,#9162,#11125,.T.);+#11125 = SURFACE_CURVE('',#11126,(#11130,#11137),.PCURVE_S1.);+#11126 = LINE('',#11127,#11128);+#11127 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+    0.193144044696));+#11128 = VECTOR('',#11129,1.);+#11129 = DIRECTION('',(1.,0.,0.));+#11130 = PCURVE('',#9177,#11131);+#11131 = DEFINITIONAL_REPRESENTATION('',(#11132),#11136);+#11132 = LINE('',#11133,#11134);+#11133 = CARTESIAN_POINT('',(0.660870737389,0.168516807605));+#11134 = VECTOR('',#11135,1.);+#11135 = DIRECTION('',(1.,0.));+#11136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11137 = PCURVE('',#9205,#11138);+#11138 = DEFINITIONAL_REPRESENTATION('',(#11139),#11143);+#11139 = LINE('',#11140,#11141);+#11140 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11141 = VECTOR('',#11142,1.);+#11142 = DIRECTION('',(1.,0.));+#11143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11144 = ADVANCED_FACE('',(#11145),#9002,.F.);+#11145 = FACE_BOUND('',#11146,.F.);+#11146 = EDGE_LOOP('',(#11147,#11148,#11171,#11194));+#11147 = ORIENTED_EDGE('',*,*,#8986,.T.);+#11148 = ORIENTED_EDGE('',*,*,#11149,.T.);+#11149 = EDGE_CURVE('',#8959,#11150,#11152,.T.);+#11150 = VERTEX_POINT('',#11151);+#11151 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+    0.193144044696));+#11152 = SURFACE_CURVE('',#11153,(#11157,#11164),.PCURVE_S1.);+#11153 = LINE('',#11154,#11155);+#11154 = CARTESIAN_POINT('',(3.5,2.925983916503,0.193144044696));+#11155 = VECTOR('',#11156,1.);+#11156 = DIRECTION('',(-1.,0.,0.));+#11157 = PCURVE('',#9002,#11158);+#11158 = DEFINITIONAL_REPRESENTATION('',(#11159),#11163);+#11159 = LINE('',#11160,#11161);+#11160 = CARTESIAN_POINT('',(0.710903945544,1.198516806055));+#11161 = VECTOR('',#11162,1.);+#11162 = DIRECTION('',(-1.,0.));+#11163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11164 = PCURVE('',#8974,#11165);+#11165 = DEFINITIONAL_REPRESENTATION('',(#11166),#11170);+#11166 = LINE('',#11167,#11168);+#11167 = CARTESIAN_POINT('',(7.4258675005E-02,0.));+#11168 = VECTOR('',#11169,1.);+#11169 = DIRECTION('',(1.,0.));+#11170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11171 = ORIENTED_EDGE('',*,*,#11172,.T.);+#11172 = EDGE_CURVE('',#11150,#11173,#11175,.T.);+#11173 = VERTEX_POINT('',#11174);+#11174 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+    0.193144044696));+#11175 = SURFACE_CURVE('',#11176,(#11180,#11187),.PCURVE_S1.);+#11176 = LINE('',#11177,#11178);+#11177 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+    0.193144044696));+#11178 = VECTOR('',#11179,1.);+#11179 = DIRECTION('',(0.,-1.,0.));+#11180 = PCURVE('',#9002,#11181);+#11181 = DEFINITIONAL_REPRESENTATION('',(#11182),#11186);+#11182 = LINE('',#11183,#11184);+#11183 = CARTESIAN_POINT('',(0.660870737389,1.198516806055));+#11184 = VECTOR('',#11185,1.);+#11185 = DIRECTION('',(0.,-1.));+#11186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11187 = PCURVE('',#10682,#11188);+#11188 = DEFINITIONAL_REPRESENTATION('',(#11189),#11193);+#11189 = LINE('',#11190,#11191);+#11190 = CARTESIAN_POINT('',(2.777592268795,0.));+#11191 = VECTOR('',#11192,1.);+#11192 = DIRECTION('',(-1.,0.));+#11193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11194 = ORIENTED_EDGE('',*,*,#11195,.T.);+#11195 = EDGE_CURVE('',#11173,#8987,#11196,.T.);+#11196 = SURFACE_CURVE('',#11197,(#11201,#11208),.PCURVE_S1.);+#11197 = LINE('',#11198,#11199);+#11198 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+    0.193144044696));+#11199 = VECTOR('',#11200,1.);+#11200 = DIRECTION('',(1.,0.,0.));+#11201 = PCURVE('',#9002,#11202);+#11202 = DEFINITIONAL_REPRESENTATION('',(#11203),#11207);+#11203 = LINE('',#11204,#11205);+#11204 = CARTESIAN_POINT('',(0.660870737389,1.118516806053));+#11205 = VECTOR('',#11206,1.);+#11206 = DIRECTION('',(1.,0.));+#11207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11208 = PCURVE('',#9030,#11209);+#11209 = DEFINITIONAL_REPRESENTATION('',(#11210),#11214);+#11210 = LINE('',#11211,#11212);+#11211 = CARTESIAN_POINT('',(1.0708116849E-02,0.));+#11212 = VECTOR('',#11213,1.);+#11213 = DIRECTION('',(1.,0.));+#11214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11215 = ADVANCED_FACE('',(#11216),#416,.F.);+#11216 = FACE_BOUND('',#11217,.F.);+#11217 = EDGE_LOOP('',(#11218,#11219,#11242,#11270,#11298,#11326,#11354,+    #11382));+#11218 = ORIENTED_EDGE('',*,*,#398,.F.);+#11219 = ORIENTED_EDGE('',*,*,#11220,.F.);+#11220 = EDGE_CURVE('',#11221,#399,#11223,.T.);+#11221 = VERTEX_POINT('',#11222);+#11222 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+    0.193144044696));+#11223 = SURFACE_CURVE('',#11224,(#11228,#11235),.PCURVE_S1.);+#11224 = LINE('',#11225,#11226);+#11225 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+    0.193144044696));+#11226 = VECTOR('',#11227,1.);+#11227 = DIRECTION('',(0.,-1.,0.));+#11228 = PCURVE('',#416,#11229);+#11229 = DEFINITIONAL_REPRESENTATION('',(#11230),#11234);+#11230 = LINE('',#11231,#11232);+#11231 = CARTESIAN_POINT('',(-0.349634015048,-1.716774448945));+#11232 = VECTOR('',#11233,1.);+#11233 = DIRECTION('',(0.,-1.));+#11234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11235 = PCURVE('',#498,#11236);+#11236 = DEFINITIONAL_REPRESENTATION('',(#11237),#11241);+#11237 = LINE('',#11238,#11239);+#11238 = CARTESIAN_POINT('',(2.50000000051E-02,0.1));+#11239 = VECTOR('',#11240,1.);+#11240 = DIRECTION('',(-1.,0.));+#11241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11242 = ORIENTED_EDGE('',*,*,#11243,.T.);+#11243 = EDGE_CURVE('',#11221,#11244,#11246,.T.);+#11244 = VERTEX_POINT('',#11245);+#11245 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+    0.193144044696));+#11246 = SURFACE_CURVE('',#11247,(#11251,#11258),.PCURVE_S1.);+#11247 = LINE('',#11248,#11249);+#11248 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+    0.193144044696));+#11249 = VECTOR('',#11250,1.);+#11250 = DIRECTION('',(0.500000000069,0.866025403744,0.));+#11251 = PCURVE('',#416,#11252);+#11252 = DEFINITIONAL_REPRESENTATION('',(#11253),#11257);+#11253 = LINE('',#11254,#11255);+#11254 = CARTESIAN_POINT('',(-0.349634015048,-1.716774448945));+#11255 = VECTOR('',#11256,1.);+#11256 = DIRECTION('',(0.500000000069,0.866025403744));+#11257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11258 = PCURVE('',#11259,#11264);+#11259 = PLANE('',#11260);+#11260 = AXIS2_PLACEMENT_3D('',#11261,#11262,#11263);+#11261 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+    9.314404469578E-02));+#11262 = DIRECTION('',(0.866025403744,-0.500000000069,0.));+#11263 = DIRECTION('',(0.500000000069,0.866025403744,0.));+#11264 = DEFINITIONAL_REPRESENTATION('',(#11265),#11269);+#11265 = LINE('',#11266,#11267);+#11266 = CARTESIAN_POINT('',(0.,0.1));+#11267 = VECTOR('',#11268,1.);+#11268 = DIRECTION('',(1.,0.));+#11269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11270 = ORIENTED_EDGE('',*,*,#11271,.F.);+#11271 = EDGE_CURVE('',#11272,#11244,#11274,.T.);+#11272 = VERTEX_POINT('',#11273);+#11273 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+    0.193144044696));+#11274 = SURFACE_CURVE('',#11275,(#11279,#11286),.PCURVE_S1.);+#11275 = LINE('',#11276,#11277);+#11276 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+    0.193144044696));+#11277 = VECTOR('',#11278,1.);+#11278 = DIRECTION('',(0.,-1.,0.));+#11279 = PCURVE('',#416,#11280);+#11280 = DEFINITIONAL_REPRESENTATION('',(#11281),#11285);+#11281 = LINE('',#11282,#11283);+#11282 = CARTESIAN_POINT('',(-0.314634015041,-1.57907546274));+#11283 = VECTOR('',#11284,1.);+#11284 = DIRECTION('',(0.,-1.));+#11285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11286 = PCURVE('',#11287,#11292);+#11287 = PLANE('',#11288);+#11288 = AXIS2_PLACEMENT_3D('',#11289,#11290,#11291);+#11289 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+    9.314404469578E-02));+#11290 = DIRECTION('',(1.,0.,0.));+#11291 = DIRECTION('',(-0.,1.,0.));+#11292 = DEFINITIONAL_REPRESENTATION('',(#11293),#11297);+#11293 = LINE('',#11294,#11295);+#11294 = CARTESIAN_POINT('',(7.707720793884E-02,0.1));+#11295 = VECTOR('',#11296,1.);+#11296 = DIRECTION('',(-1.,0.));+#11297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11298 = ORIENTED_EDGE('',*,*,#11299,.F.);+#11299 = EDGE_CURVE('',#11300,#11272,#11302,.T.);+#11300 = VERTEX_POINT('',#11301);+#11301 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+    0.193144044696));+#11302 = SURFACE_CURVE('',#11303,(#11307,#11314),.PCURVE_S1.);+#11303 = LINE('',#11304,#11305);+#11304 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+    0.193144044696));+#11305 = VECTOR('',#11306,1.);+#11306 = DIRECTION('',(1.,0.,0.));+#11307 = PCURVE('',#416,#11308);+#11308 = DEFINITIONAL_REPRESENTATION('',(#11309),#11313);+#11309 = LINE('',#11310,#11311);+#11310 = CARTESIAN_POINT('',(-0.589634015042,-1.57907546274));+#11311 = VECTOR('',#11312,1.);+#11312 = DIRECTION('',(1.,0.));+#11313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11314 = PCURVE('',#11315,#11320);+#11315 = PLANE('',#11316);+#11316 = AXIS2_PLACEMENT_3D('',#11317,#11318,#11319);+#11317 = CARTESIAN_POINT('',(1.822021177074,0.148391647708,+    0.193144044696));+#11318 = DIRECTION('',(0.,-1.,0.));+#11319 = DIRECTION('',(1.,0.,0.));+#11320 = DEFINITIONAL_REPRESENTATION('',(#11321),#11325);+#11321 = LINE('',#11322,#11323);+#11322 = CARTESIAN_POINT('',(0.37744086234,0.));+#11323 = VECTOR('',#11324,1.);+#11324 = DIRECTION('',(1.,0.));+#11325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11326 = ORIENTED_EDGE('',*,*,#11327,.F.);+#11327 = EDGE_CURVE('',#11328,#11300,#11330,.T.);+#11328 = VERTEX_POINT('',#11329);+#11329 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+    0.193144044696));+#11330 = SURFACE_CURVE('',#11331,(#11335,#11342),.PCURVE_S1.);+#11331 = LINE('',#11332,#11333);+#11332 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+    0.193144044696));+#11333 = VECTOR('',#11334,1.);+#11334 = DIRECTION('',(0.,1.,0.));+#11335 = PCURVE('',#416,#11336);+#11336 = DEFINITIONAL_REPRESENTATION('',(#11337),#11341);+#11337 = LINE('',#11338,#11339);+#11338 = CARTESIAN_POINT('',(-0.589634015042,-1.656152670733));+#11339 = VECTOR('',#11340,1.);+#11340 = DIRECTION('',(0.,1.));+#11341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11342 = PCURVE('',#11343,#11348);+#11343 = PLANE('',#11344);+#11344 = AXIS2_PLACEMENT_3D('',#11345,#11346,#11347);+#11345 = CARTESIAN_POINT('',(2.199462039414,0.160692661497,+    9.314404469578E-02));+#11346 = DIRECTION('',(-1.,0.,0.));+#11347 = DIRECTION('',(0.,-1.,0.));+#11348 = DEFINITIONAL_REPRESENTATION('',(#11349),#11353);+#11349 = LINE('',#11350,#11351);+#11350 = CARTESIAN_POINT('',(8.93782217824E-02,0.1));+#11351 = VECTOR('',#11352,1.);+#11352 = DIRECTION('',(-1.,0.));+#11353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11354 = ORIENTED_EDGE('',*,*,#11355,.T.);+#11355 = EDGE_CURVE('',#11328,#11356,#11358,.T.);+#11356 = VERTEX_POINT('',#11357);+#11357 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+    0.193144044696));+#11358 = SURFACE_CURVE('',#11359,(#11363,#11370),.PCURVE_S1.);+#11359 = LINE('',#11360,#11361);+#11360 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+    0.193144044696));+#11361 = VECTOR('',#11362,1.);+#11362 = DIRECTION('',(0.50000000009,-0.866025403732,0.));+#11363 = PCURVE('',#416,#11364);+#11364 = DEFINITIONAL_REPRESENTATION('',(#11365),#11369);+#11365 = LINE('',#11366,#11367);+#11366 = CARTESIAN_POINT('',(-0.589634015042,-1.656152670733));+#11367 = VECTOR('',#11368,1.);+#11368 = DIRECTION('',(0.50000000009,-0.866025403732));+#11369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11370 = PCURVE('',#11371,#11376);+#11371 = PLANE('',#11372);+#11372 = AXIS2_PLACEMENT_3D('',#11373,#11374,#11375);+#11373 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+    9.314404469578E-02));+#11374 = DIRECTION('',(-0.866025403732,-0.50000000009,0.));+#11375 = DIRECTION('',(0.50000000009,-0.866025403732,0.));+#11376 = DEFINITIONAL_REPRESENTATION('',(#11377),#11381);+#11377 = LINE('',#11378,#11379);+#11378 = CARTESIAN_POINT('',(0.,0.1));+#11379 = VECTOR('',#11380,1.);+#11380 = DIRECTION('',(1.,0.));+#11381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11382 = ORIENTED_EDGE('',*,*,#11383,.F.);+#11383 = EDGE_CURVE('',#401,#11356,#11384,.T.);+#11384 = SURFACE_CURVE('',#11385,(#11389,#11396),.PCURVE_S1.);+#11385 = LINE('',#11386,#11387);+#11386 = CARTESIAN_POINT('',(2.239462039422,0.,0.193144044696));+#11387 = VECTOR('',#11388,1.);+#11388 = DIRECTION('',(0.,1.,-1.365650185035E-14));+#11389 = PCURVE('',#416,#11390);+#11390 = DEFINITIONAL_REPRESENTATION('',(#11391),#11395);+#11391 = LINE('',#11392,#11393);+#11392 = CARTESIAN_POINT('',(-0.549634015034,-1.727467110448));+#11393 = VECTOR('',#11394,1.);+#11394 = DIRECTION('',(0.,1.));+#11395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11396 = PCURVE('',#444,#11397);+#11397 = DEFINITIONAL_REPRESENTATION('',(#11398),#11402);+#11398 = LINE('',#11399,#11400);+#11399 = CARTESIAN_POINT('',(2.032407414415E-03,0.1));+#11400 = VECTOR('',#11401,1.);+#11401 = DIRECTION('',(-1.,-1.365650185035E-14));+#11402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11403 = ADVANCED_FACE('',(#11404),#9674,.T.);+#11404 = FACE_BOUND('',#11405,.F.);+#11405 = EDGE_LOOP('',(#11406,#11407,#11408,#11429));+#11406 = ORIENTED_EDGE('',*,*,#9658,.T.);+#11407 = ORIENTED_EDGE('',*,*,#9795,.F.);+#11408 = ORIENTED_EDGE('',*,*,#11409,.F.);+#11409 = EDGE_CURVE('',#10888,#9768,#11410,.T.);+#11410 = SURFACE_CURVE('',#11411,(#11415,#11422),.PCURVE_S1.);+#11411 = LINE('',#11412,#11413);+#11412 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+    0.193144044696));+#11413 = VECTOR('',#11414,1.);+#11414 = DIRECTION('',(0.,0.,-1.));+#11415 = PCURVE('',#9674,#11416);+#11416 = DEFINITIONAL_REPRESENTATION('',(#11417),#11421);+#11417 = LINE('',#11418,#11419);+#11418 = CARTESIAN_POINT('',(0.124291879868,0.));+#11419 = VECTOR('',#11420,1.);+#11420 = DIRECTION('',(0.,1.));+#11421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11422 = PCURVE('',#9783,#11423);+#11423 = DEFINITIONAL_REPRESENTATION('',(#11424),#11428);+#11424 = LINE('',#11425,#11426);+#11425 = CARTESIAN_POINT('',(0.327592270347,0.));+#11426 = VECTOR('',#11427,1.);+#11427 = DIRECTION('',(0.,-1.));+#11428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11429 = ORIENTED_EDGE('',*,*,#10887,.T.);+#11430 = ADVANCED_FACE('',(#11431),#9970,.T.);+#11431 = FACE_BOUND('',#11432,.F.);+#11432 = EDGE_LOOP('',(#11433,#11454,#11455,#11476));+#11433 = ORIENTED_EDGE('',*,*,#11434,.F.);+#11434 = EDGE_CURVE('',#10960,#9932,#11435,.T.);+#11435 = SURFACE_CURVE('',#11436,(#11440,#11447),.PCURVE_S1.);+#11436 = LINE('',#11437,#11438);+#11437 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,0.193144044696+    ));+#11438 = VECTOR('',#11439,1.);+#11439 = DIRECTION('',(0.,0.,-1.));+#11440 = PCURVE('',#9970,#11441);+#11441 = DEFINITIONAL_REPRESENTATION('',(#11442),#11446);+#11442 = LINE('',#11443,#11444);+#11443 = CARTESIAN_POINT('',(0.747592270342,0.));+#11444 = VECTOR('',#11445,1.);+#11445 = DIRECTION('',(0.,-1.));+#11446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11447 = PCURVE('',#9555,#11448);+#11448 = DEFINITIONAL_REPRESENTATION('',(#11449),#11453);+#11449 = LINE('',#11450,#11451);+#11450 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11451 = VECTOR('',#11452,1.);+#11452 = DIRECTION('',(0.,1.));+#11453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11454 = ORIENTED_EDGE('',*,*,#10959,.F.);+#11455 = ORIENTED_EDGE('',*,*,#11456,.T.);+#11456 = EDGE_CURVE('',#10937,#9955,#11457,.T.);+#11457 = SURFACE_CURVE('',#11458,(#11462,#11469),.PCURVE_S1.);+#11458 = LINE('',#11459,#11460);+#11459 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+    0.193144044696));+#11460 = VECTOR('',#11461,1.);+#11461 = DIRECTION('',(0.,0.,-1.));+#11462 = PCURVE('',#9970,#11463);+#11463 = DEFINITIONAL_REPRESENTATION('',(#11464),#11468);+#11464 = LINE('',#11465,#11466);+#11465 = CARTESIAN_POINT('',(0.827592270344,0.));+#11466 = VECTOR('',#11467,1.);+#11467 = DIRECTION('',(0.,-1.));+#11468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11469 = PCURVE('',#9499,#11470);+#11470 = DEFINITIONAL_REPRESENTATION('',(#11471),#11475);+#11471 = LINE('',#11472,#11473);+#11472 = CARTESIAN_POINT('',(0.124291879868,0.));+#11473 = VECTOR('',#11474,1.);+#11474 = DIRECTION('',(0.,1.));+#11475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11476 = ORIENTED_EDGE('',*,*,#9954,.F.);+#11477 = ADVANCED_FACE('',(#11478),#10344,.T.);+#11478 = FACE_BOUND('',#11479,.F.);+#11479 = EDGE_LOOP('',(#11480,#11501,#11502,#11523));+#11480 = ORIENTED_EDGE('',*,*,#11481,.F.);+#11481 = EDGE_CURVE('',#11102,#10306,#11482,.T.);+#11482 = SURFACE_CURVE('',#11483,(#11487,#11494),.PCURVE_S1.);+#11483 = LINE('',#11484,#11485);+#11484 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+    0.193144044696));+#11485 = VECTOR('',#11486,1.);+#11486 = DIRECTION('',(0.,0.,-1.));+#11487 = PCURVE('',#10344,#11488);+#11488 = DEFINITIONAL_REPRESENTATION('',(#11489),#11493);+#11489 = LINE('',#11490,#11491);+#11490 = CARTESIAN_POINT('',(1.747592270345,0.));+#11491 = VECTOR('',#11492,1.);+#11492 = DIRECTION('',(0.,-1.));+#11493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11494 = PCURVE('',#9205,#11495);+#11495 = DEFINITIONAL_REPRESENTATION('',(#11496),#11500);+#11496 = LINE('',#11497,#11498);+#11497 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11498 = VECTOR('',#11499,1.);+#11499 = DIRECTION('',(0.,1.));+#11500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11501 = ORIENTED_EDGE('',*,*,#11101,.F.);+#11502 = ORIENTED_EDGE('',*,*,#11503,.T.);+#11503 = EDGE_CURVE('',#11079,#10329,#11504,.T.);+#11504 = SURFACE_CURVE('',#11505,(#11509,#11516),.PCURVE_S1.);+#11505 = LINE('',#11506,#11507);+#11506 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+    0.193144044696));+#11507 = VECTOR('',#11508,1.);+#11508 = DIRECTION('',(0.,0.,-1.));+#11509 = PCURVE('',#10344,#11510);+#11510 = DEFINITIONAL_REPRESENTATION('',(#11511),#11515);+#11511 = LINE('',#11512,#11513);+#11512 = CARTESIAN_POINT('',(1.827592270344,0.));+#11513 = VECTOR('',#11514,1.);+#11514 = DIRECTION('',(0.,-1.));+#11515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11516 = PCURVE('',#9149,#11517);+#11517 = DEFINITIONAL_REPRESENTATION('',(#11518),#11522);+#11518 = LINE('',#11519,#11520);+#11519 = CARTESIAN_POINT('',(0.124291879868,0.));+#11520 = VECTOR('',#11521,1.);+#11521 = DIRECTION('',(0.,1.));+#11522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11523 = ORIENTED_EDGE('',*,*,#10328,.F.);+#11524 = ADVANCED_FACE('',(#11525),#10682,.T.);+#11525 = FACE_BOUND('',#11526,.F.);+#11526 = EDGE_LOOP('',(#11527,#11548,#11549,#11570));+#11527 = ORIENTED_EDGE('',*,*,#11528,.T.);+#11528 = EDGE_CURVE('',#11150,#10667,#11529,.T.);+#11529 = SURFACE_CURVE('',#11530,(#11534,#11541),.PCURVE_S1.);+#11530 = LINE('',#11531,#11532);+#11531 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+    0.193144044696));+#11532 = VECTOR('',#11533,1.);+#11533 = DIRECTION('',(0.,0.,-1.));+#11534 = PCURVE('',#10682,#11535);+#11535 = DEFINITIONAL_REPRESENTATION('',(#11536),#11540);+#11536 = LINE('',#11537,#11538);+#11537 = CARTESIAN_POINT('',(2.777592268795,0.));+#11538 = VECTOR('',#11539,1.);+#11539 = DIRECTION('',(0.,-1.));+#11540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11541 = PCURVE('',#8974,#11542);+#11542 = DEFINITIONAL_REPRESENTATION('',(#11543),#11547);+#11543 = LINE('',#11544,#11545);+#11544 = CARTESIAN_POINT('',(0.12429188316,0.));+#11545 = VECTOR('',#11546,1.);+#11546 = DIRECTION('',(0.,1.));+#11547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11548 = ORIENTED_EDGE('',*,*,#10666,.F.);+#11549 = ORIENTED_EDGE('',*,*,#11550,.F.);+#11550 = EDGE_CURVE('',#11173,#10644,#11551,.T.);+#11551 = SURFACE_CURVE('',#11552,(#11556,#11563),.PCURVE_S1.);+#11552 = LINE('',#11553,#11554);+#11553 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+    0.193144044696));+#11554 = VECTOR('',#11555,1.);+#11555 = DIRECTION('',(0.,0.,-1.));+#11556 = PCURVE('',#10682,#11557);+#11557 = DEFINITIONAL_REPRESENTATION('',(#11558),#11562);+#11558 = LINE('',#11559,#11560);+#11559 = CARTESIAN_POINT('',(2.697592268793,0.));+#11560 = VECTOR('',#11561,1.);+#11561 = DIRECTION('',(0.,-1.));+#11562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11563 = PCURVE('',#9030,#11564);+#11564 = DEFINITIONAL_REPRESENTATION('',(#11565),#11569);+#11565 = LINE('',#11566,#11567);+#11566 = CARTESIAN_POINT('',(1.0708116849E-02,0.));+#11567 = VECTOR('',#11568,1.);+#11568 = DIRECTION('',(0.,1.));+#11569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11570 = ORIENTED_EDGE('',*,*,#11172,.F.);+#11571 = ADVANCED_FACE('',(#11572),#10157,.T.);+#11572 = FACE_BOUND('',#11573,.F.);+#11573 = EDGE_LOOP('',(#11574,#11595,#11596,#11617));+#11574 = ORIENTED_EDGE('',*,*,#11575,.T.);+#11575 = EDGE_CURVE('',#11008,#10142,#11576,.T.);+#11576 = SURFACE_CURVE('',#11577,(#11581,#11588),.PCURVE_S1.);+#11577 = LINE('',#11578,#11579);+#11578 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,0.193144044696+    ));+#11579 = VECTOR('',#11580,1.);+#11580 = DIRECTION('',(0.,0.,-1.));+#11581 = PCURVE('',#10157,#11582);+#11582 = DEFINITIONAL_REPRESENTATION('',(#11583),#11587);+#11583 = LINE('',#11584,#11585);+#11584 = CARTESIAN_POINT('',(1.327592270342,0.));+#11585 = VECTOR('',#11586,1.);+#11586 = DIRECTION('',(0.,-1.));+#11587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11588 = PCURVE('',#9324,#11589);+#11589 = DEFINITIONAL_REPRESENTATION('',(#11590),#11594);+#11590 = LINE('',#11591,#11592);+#11591 = CARTESIAN_POINT('',(0.124291879868,0.));+#11592 = VECTOR('',#11593,1.);+#11593 = DIRECTION('',(0.,1.));+#11594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11595 = ORIENTED_EDGE('',*,*,#10141,.F.);+#11596 = ORIENTED_EDGE('',*,*,#11597,.F.);+#11597 = EDGE_CURVE('',#11031,#10119,#11598,.T.);+#11598 = SURFACE_CURVE('',#11599,(#11603,#11610),.PCURVE_S1.);+#11599 = LINE('',#11600,#11601);+#11600 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+    0.193144044696));+#11601 = VECTOR('',#11602,1.);+#11602 = DIRECTION('',(0.,0.,-1.));+#11603 = PCURVE('',#10157,#11604);+#11604 = DEFINITIONAL_REPRESENTATION('',(#11605),#11609);+#11605 = LINE('',#11606,#11607);+#11606 = CARTESIAN_POINT('',(1.247592270344,0.));+#11607 = VECTOR('',#11608,1.);+#11608 = DIRECTION('',(0.,-1.));+#11609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11610 = PCURVE('',#9380,#11611);+#11611 = DEFINITIONAL_REPRESENTATION('',(#11612),#11616);+#11612 = LINE('',#11613,#11614);+#11613 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11614 = VECTOR('',#11615,1.);+#11615 = DIRECTION('',(0.,1.));+#11616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11617 = ORIENTED_EDGE('',*,*,#11030,.F.);+#11618 = ADVANCED_FACE('',(#11619),#9783,.T.);+#11619 = FACE_BOUND('',#11620,.F.);+#11620 = EDGE_LOOP('',(#11621,#11622,#11623,#11624));+#11621 = ORIENTED_EDGE('',*,*,#11409,.T.);+#11622 = ORIENTED_EDGE('',*,*,#9767,.F.);+#11623 = ORIENTED_EDGE('',*,*,#10861,.F.);+#11624 = ORIENTED_EDGE('',*,*,#10910,.F.);+#11625 = ADVANCED_FACE('',(#11626),#9555,.T.);+#11626 = FACE_BOUND('',#11627,.F.);+#11627 = EDGE_LOOP('',(#11628,#11629,#11630,#11631));+#11628 = ORIENTED_EDGE('',*,*,#9539,.F.);+#11629 = ORIENTED_EDGE('',*,*,#10982,.F.);+#11630 = ORIENTED_EDGE('',*,*,#11434,.T.);+#11631 = ORIENTED_EDGE('',*,*,#9931,.F.);+#11632 = ADVANCED_FACE('',(#11633),#9499,.T.);+#11633 = FACE_BOUND('',#11634,.F.);+#11634 = EDGE_LOOP('',(#11635,#11636,#11637,#11638));+#11635 = ORIENTED_EDGE('',*,*,#9483,.T.);+#11636 = ORIENTED_EDGE('',*,*,#9982,.F.);+#11637 = ORIENTED_EDGE('',*,*,#11456,.F.);+#11638 = ORIENTED_EDGE('',*,*,#10936,.F.);+#11639 = ADVANCED_FACE('',(#11640),#9205,.T.);+#11640 = FACE_BOUND('',#11641,.F.);+#11641 = EDGE_LOOP('',(#11642,#11643,#11644,#11645));+#11642 = ORIENTED_EDGE('',*,*,#9189,.F.);+#11643 = ORIENTED_EDGE('',*,*,#11124,.F.);+#11644 = ORIENTED_EDGE('',*,*,#11481,.T.);+#11645 = ORIENTED_EDGE('',*,*,#10305,.F.);+#11646 = ADVANCED_FACE('',(#11647),#9149,.T.);+#11647 = FACE_BOUND('',#11648,.F.);+#11648 = EDGE_LOOP('',(#11649,#11650,#11651,#11652));+#11649 = ORIENTED_EDGE('',*,*,#9133,.T.);+#11650 = ORIENTED_EDGE('',*,*,#10356,.F.);+#11651 = ORIENTED_EDGE('',*,*,#11503,.F.);+#11652 = ORIENTED_EDGE('',*,*,#11078,.F.);+#11653 = ADVANCED_FACE('',(#11654),#8974,.T.);+#11654 = FACE_BOUND('',#11655,.F.);+#11655 = EDGE_LOOP('',(#11656,#11657,#11658,#11659));+#11656 = ORIENTED_EDGE('',*,*,#8958,.T.);+#11657 = ORIENTED_EDGE('',*,*,#10694,.F.);+#11658 = ORIENTED_EDGE('',*,*,#11528,.F.);+#11659 = ORIENTED_EDGE('',*,*,#11149,.F.);+#11660 = ADVANCED_FACE('',(#11661),#9030,.T.);+#11661 = FACE_BOUND('',#11662,.F.);+#11662 = EDGE_LOOP('',(#11663,#11664,#11665,#11666));+#11663 = ORIENTED_EDGE('',*,*,#9014,.F.);+#11664 = ORIENTED_EDGE('',*,*,#11195,.F.);+#11665 = ORIENTED_EDGE('',*,*,#11550,.T.);+#11666 = ORIENTED_EDGE('',*,*,#10643,.T.);+#11667 = ADVANCED_FACE('',(#11668),#9324,.T.);+#11668 = FACE_BOUND('',#11669,.F.);+#11669 = EDGE_LOOP('',(#11670,#11671,#11672,#11673));+#11670 = ORIENTED_EDGE('',*,*,#9308,.T.);+#11671 = ORIENTED_EDGE('',*,*,#10169,.F.);+#11672 = ORIENTED_EDGE('',*,*,#11575,.F.);+#11673 = ORIENTED_EDGE('',*,*,#11007,.F.);+#11674 = ADVANCED_FACE('',(#11675),#9380,.T.);+#11675 = FACE_BOUND('',#11676,.F.);+#11676 = EDGE_LOOP('',(#11677,#11678,#11679,#11680));+#11677 = ORIENTED_EDGE('',*,*,#9364,.F.);+#11678 = ORIENTED_EDGE('',*,*,#11053,.F.);+#11679 = ORIENTED_EDGE('',*,*,#11597,.T.);+#11680 = ORIENTED_EDGE('',*,*,#10118,.T.);+#11681 = ADVANCED_FACE('',(#11682),#498,.F.);+#11682 = FACE_BOUND('',#11683,.F.);+#11683 = EDGE_LOOP('',(#11684,#11685,#11708,#11729));+#11684 = ORIENTED_EDGE('',*,*,#484,.F.);+#11685 = ORIENTED_EDGE('',*,*,#11686,.T.);+#11686 = EDGE_CURVE('',#457,#11687,#11689,.T.);+#11687 = VERTEX_POINT('',#11688);+#11688 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+    9.314404469578E-02));+#11689 = SURFACE_CURVE('',#11690,(#11694,#11701),.PCURVE_S1.);+#11690 = LINE('',#11691,#11692);+#11691 = CARTESIAN_POINT('',(2.439462039408,0.,9.314404469578E-02));+#11692 = VECTOR('',#11693,1.);+#11693 = DIRECTION('',(0.,1.,0.));+#11694 = PCURVE('',#498,#11695);+#11695 = DEFINITIONAL_REPRESENTATION('',(#11696),#11700);+#11696 = LINE('',#11697,#11698);+#11697 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#11698 = VECTOR('',#11699,1.);+#11699 = DIRECTION('',(1.,0.));+#11700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11701 = PCURVE('',#472,#11702);+#11702 = DEFINITIONAL_REPRESENTATION('',(#11703),#11707);+#11703 = LINE('',#11704,#11705);+#11704 = CARTESIAN_POINT('',(-0.349634015048,-1.727467110448));+#11705 = VECTOR('',#11706,1.);+#11706 = DIRECTION('',(0.,1.));+#11707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11708 = ORIENTED_EDGE('',*,*,#11709,.F.);+#11709 = EDGE_CURVE('',#11221,#11687,#11710,.T.);+#11710 = SURFACE_CURVE('',#11711,(#11715,#11722),.PCURVE_S1.);+#11711 = LINE('',#11712,#11713);+#11712 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+    0.193144044696));+#11713 = VECTOR('',#11714,1.);+#11714 = DIRECTION('',(0.,0.,-1.));+#11715 = PCURVE('',#498,#11716);+#11716 = DEFINITIONAL_REPRESENTATION('',(#11717),#11721);+#11717 = LINE('',#11718,#11719);+#11718 = CARTESIAN_POINT('',(2.50000000051E-02,0.1));+#11719 = VECTOR('',#11720,1.);+#11720 = DIRECTION('',(0.,-1.));+#11721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11722 = PCURVE('',#11259,#11723);+#11723 = DEFINITIONAL_REPRESENTATION('',(#11724),#11728);+#11724 = LINE('',#11725,#11726);+#11725 = CARTESIAN_POINT('',(0.,0.1));+#11726 = VECTOR('',#11727,1.);+#11727 = DIRECTION('',(0.,-1.));+#11728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11729 = ORIENTED_EDGE('',*,*,#11220,.T.);+#11730 = ADVANCED_FACE('',(#11731),#472,.T.);+#11731 = FACE_BOUND('',#11732,.F.);+#11732 = EDGE_LOOP('',(#11733,#11734,#11757,#11780,#11803,#11826,#11849,+    #11870));+#11733 = ORIENTED_EDGE('',*,*,#456,.F.);+#11734 = ORIENTED_EDGE('',*,*,#11735,.F.);+#11735 = EDGE_CURVE('',#11736,#429,#11738,.T.);+#11736 = VERTEX_POINT('',#11737);+#11737 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+    9.314404469578E-02));+#11738 = SURFACE_CURVE('',#11739,(#11743,#11750),.PCURVE_S1.);+#11739 = LINE('',#11740,#11741);+#11740 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+    9.314404469578E-02));+#11741 = VECTOR('',#11742,1.);+#11742 = DIRECTION('',(0.,-1.,0.));+#11743 = PCURVE('',#472,#11744);+#11744 = DEFINITIONAL_REPRESENTATION('',(#11745),#11749);+#11745 = LINE('',#11746,#11747);+#11746 = CARTESIAN_POINT('',(-0.549634015034,-1.725434703034));+#11747 = VECTOR('',#11748,1.);+#11748 = DIRECTION('',(0.,-1.));+#11749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11750 = PCURVE('',#444,#11751);+#11751 = DEFINITIONAL_REPRESENTATION('',(#11752),#11756);+#11752 = LINE('',#11753,#11754);+#11753 = CARTESIAN_POINT('',(0.,0.));+#11754 = VECTOR('',#11755,1.);+#11755 = DIRECTION('',(1.,0.));+#11756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11757 = ORIENTED_EDGE('',*,*,#11758,.T.);+#11758 = EDGE_CURVE('',#11736,#11759,#11761,.T.);+#11759 = VERTEX_POINT('',#11760);+#11760 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+    9.314404469578E-02));+#11761 = SURFACE_CURVE('',#11762,(#11766,#11773),.PCURVE_S1.);+#11762 = LINE('',#11763,#11764);+#11763 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+    9.314404469578E-02));+#11764 = VECTOR('',#11765,1.);+#11765 = DIRECTION('',(-0.50000000009,0.866025403732,0.));+#11766 = PCURVE('',#472,#11767);+#11767 = DEFINITIONAL_REPRESENTATION('',(#11768),#11772);+#11768 = LINE('',#11769,#11770);+#11769 = CARTESIAN_POINT('',(-0.549634015034,-1.725434703034));+#11770 = VECTOR('',#11771,1.);+#11771 = DIRECTION('',(-0.50000000009,0.866025403732));+#11772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11773 = PCURVE('',#11371,#11774);+#11774 = DEFINITIONAL_REPRESENTATION('',(#11775),#11779);+#11775 = LINE('',#11776,#11777);+#11776 = CARTESIAN_POINT('',(8.000000000177E-02,0.));+#11777 = VECTOR('',#11778,1.);+#11778 = DIRECTION('',(-1.,0.));+#11779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11780 = ORIENTED_EDGE('',*,*,#11781,.F.);+#11781 = EDGE_CURVE('',#11782,#11759,#11784,.T.);+#11782 = VERTEX_POINT('',#11783);+#11783 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+    9.314404469578E-02));+#11784 = SURFACE_CURVE('',#11785,(#11789,#11796),.PCURVE_S1.);+#11785 = LINE('',#11786,#11787);+#11786 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+    9.314404469578E-02));+#11787 = VECTOR('',#11788,1.);+#11788 = DIRECTION('',(0.,-1.,0.));+#11789 = PCURVE('',#472,#11790);+#11790 = DEFINITIONAL_REPRESENTATION('',(#11791),#11795);+#11791 = LINE('',#11792,#11793);+#11792 = CARTESIAN_POINT('',(-0.589634015042,-1.57907546274));+#11793 = VECTOR('',#11794,1.);+#11794 = DIRECTION('',(0.,-1.));+#11795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11796 = PCURVE('',#11343,#11797);+#11797 = DEFINITIONAL_REPRESENTATION('',(#11798),#11802);+#11798 = LINE('',#11799,#11800);+#11799 = CARTESIAN_POINT('',(1.2301013789E-02,0.));+#11800 = VECTOR('',#11801,1.);+#11801 = DIRECTION('',(1.,0.));+#11802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11803 = ORIENTED_EDGE('',*,*,#11804,.T.);+#11804 = EDGE_CURVE('',#11782,#11805,#11807,.T.);+#11805 = VERTEX_POINT('',#11806);+#11806 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+    9.314404469578E-02));+#11807 = SURFACE_CURVE('',#11808,(#11812,#11819),.PCURVE_S1.);+#11808 = LINE('',#11809,#11810);+#11809 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+    9.314404469578E-02));+#11810 = VECTOR('',#11811,1.);+#11811 = DIRECTION('',(1.,0.,0.));+#11812 = PCURVE('',#472,#11813);+#11813 = DEFINITIONAL_REPRESENTATION('',(#11814),#11818);+#11814 = LINE('',#11815,#11816);+#11815 = CARTESIAN_POINT('',(-0.589634015042,-1.57907546274));+#11816 = VECTOR('',#11817,1.);+#11817 = DIRECTION('',(1.,0.));+#11818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11819 = PCURVE('',#11315,#11820);+#11820 = DEFINITIONAL_REPRESENTATION('',(#11821),#11825);+#11821 = LINE('',#11822,#11823);+#11822 = CARTESIAN_POINT('',(0.37744086234,-0.1));+#11823 = VECTOR('',#11824,1.);+#11824 = DIRECTION('',(1.,0.));+#11825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11826 = ORIENTED_EDGE('',*,*,#11827,.F.);+#11827 = EDGE_CURVE('',#11828,#11805,#11830,.T.);+#11828 = VERTEX_POINT('',#11829);+#11829 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+    9.314404469578E-02));+#11830 = SURFACE_CURVE('',#11831,(#11835,#11842),.PCURVE_S1.);+#11831 = LINE('',#11832,#11833);+#11832 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+    9.314404469578E-02));+#11833 = VECTOR('',#11834,1.);+#11834 = DIRECTION('',(0.,1.,0.));+#11835 = PCURVE('',#472,#11836);+#11836 = DEFINITIONAL_REPRESENTATION('',(#11837),#11841);+#11837 = LINE('',#11838,#11839);+#11838 = CARTESIAN_POINT('',(-0.314634015041,-1.656152670679));+#11839 = VECTOR('',#11840,1.);+#11840 = DIRECTION('',(0.,1.));+#11841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11842 = PCURVE('',#11287,#11843);+#11843 = DEFINITIONAL_REPRESENTATION('',(#11844),#11848);+#11844 = LINE('',#11845,#11846);+#11845 = CARTESIAN_POINT('',(0.,0.));+#11846 = VECTOR('',#11847,1.);+#11847 = DIRECTION('',(1.,0.));+#11848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11849 = ORIENTED_EDGE('',*,*,#11850,.T.);+#11850 = EDGE_CURVE('',#11828,#11687,#11851,.T.);+#11851 = SURFACE_CURVE('',#11852,(#11856,#11863),.PCURVE_S1.);+#11852 = LINE('',#11853,#11854);+#11853 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+    9.314404469578E-02));+#11854 = VECTOR('',#11855,1.);+#11855 = DIRECTION('',(-0.500000000069,-0.866025403744,0.));+#11856 = PCURVE('',#472,#11857);+#11857 = DEFINITIONAL_REPRESENTATION('',(#11858),#11862);+#11858 = LINE('',#11859,#11860);+#11859 = CARTESIAN_POINT('',(-0.314634015041,-1.656152670679));+#11860 = VECTOR('',#11861,1.);+#11861 = DIRECTION('',(-0.500000000069,-0.866025403744));+#11862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11863 = PCURVE('',#11259,#11864);+#11864 = DEFINITIONAL_REPRESENTATION('',(#11865),#11869);+#11865 = LINE('',#11866,#11867);+#11866 = CARTESIAN_POINT('',(7.00000000045E-02,0.));+#11867 = VECTOR('',#11868,1.);+#11868 = DIRECTION('',(-1.,0.));+#11869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11870 = ORIENTED_EDGE('',*,*,#11686,.F.);+#11871 = ADVANCED_FACE('',(#11872),#444,.F.);+#11872 = FACE_BOUND('',#11873,.F.);+#11873 = EDGE_LOOP('',(#11874,#11875,#11876,#11897));+#11874 = ORIENTED_EDGE('',*,*,#428,.T.);+#11875 = ORIENTED_EDGE('',*,*,#11383,.T.);+#11876 = ORIENTED_EDGE('',*,*,#11877,.T.);+#11877 = EDGE_CURVE('',#11356,#11736,#11878,.T.);+#11878 = SURFACE_CURVE('',#11879,(#11883,#11890),.PCURVE_S1.);+#11879 = LINE('',#11880,#11881);+#11880 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+    0.193144044696));+#11881 = VECTOR('',#11882,1.);+#11882 = DIRECTION('',(0.,0.,-1.));+#11883 = PCURVE('',#444,#11884);+#11884 = DEFINITIONAL_REPRESENTATION('',(#11885),#11889);+#11885 = LINE('',#11886,#11887);+#11886 = CARTESIAN_POINT('',(0.,0.1));+#11887 = VECTOR('',#11888,1.);+#11888 = DIRECTION('',(0.,-1.));+#11889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11890 = PCURVE('',#11371,#11891);+#11891 = DEFINITIONAL_REPRESENTATION('',(#11892),#11896);+#11892 = LINE('',#11893,#11894);+#11893 = CARTESIAN_POINT('',(8.000000000177E-02,0.1));+#11894 = VECTOR('',#11895,1.);+#11895 = DIRECTION('',(0.,-1.));+#11896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11897 = ORIENTED_EDGE('',*,*,#11735,.T.);+#11898 = ADVANCED_FACE('',(#11899),#11371,.F.);+#11899 = FACE_BOUND('',#11900,.F.);+#11900 = EDGE_LOOP('',(#11901,#11902,#11903,#11904));+#11901 = ORIENTED_EDGE('',*,*,#11758,.F.);+#11902 = ORIENTED_EDGE('',*,*,#11877,.F.);+#11903 = ORIENTED_EDGE('',*,*,#11355,.F.);+#11904 = ORIENTED_EDGE('',*,*,#11905,.T.);+#11905 = EDGE_CURVE('',#11328,#11759,#11906,.T.);+#11906 = SURFACE_CURVE('',#11907,(#11911,#11918),.PCURVE_S1.);+#11907 = LINE('',#11908,#11909);+#11908 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+    0.193144044696));+#11909 = VECTOR('',#11910,1.);+#11910 = DIRECTION('',(0.,0.,-1.));+#11911 = PCURVE('',#11371,#11912);+#11912 = DEFINITIONAL_REPRESENTATION('',(#11913),#11917);+#11913 = LINE('',#11914,#11915);+#11914 = CARTESIAN_POINT('',(0.,0.1));+#11915 = VECTOR('',#11916,1.);+#11916 = DIRECTION('',(0.,-1.));+#11917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11918 = PCURVE('',#11343,#11919);+#11919 = DEFINITIONAL_REPRESENTATION('',(#11920),#11924);+#11920 = LINE('',#11921,#11922);+#11921 = CARTESIAN_POINT('',(8.93782217824E-02,0.1));+#11922 = VECTOR('',#11923,1.);+#11923 = DIRECTION('',(0.,-1.));+#11924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11925 = ADVANCED_FACE('',(#11926),#11343,.F.);+#11926 = FACE_BOUND('',#11927,.F.);+#11927 = EDGE_LOOP('',(#11928,#11949,#11950,#11951));+#11928 = ORIENTED_EDGE('',*,*,#11929,.F.);+#11929 = EDGE_CURVE('',#11782,#11300,#11930,.T.);+#11930 = SURFACE_CURVE('',#11931,(#11935,#11942),.PCURVE_S1.);+#11931 = LINE('',#11932,#11933);+#11932 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+    9.314404469578E-02));+#11933 = VECTOR('',#11934,1.);+#11934 = DIRECTION('',(0.,0.,1.));+#11935 = PCURVE('',#11343,#11936);+#11936 = DEFINITIONAL_REPRESENTATION('',(#11937),#11941);+#11937 = LINE('',#11938,#11939);+#11938 = CARTESIAN_POINT('',(1.2301013789E-02,0.));+#11939 = VECTOR('',#11940,1.);+#11940 = DIRECTION('',(0.,1.));+#11941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11942 = PCURVE('',#11315,#11943);+#11943 = DEFINITIONAL_REPRESENTATION('',(#11944),#11948);+#11944 = LINE('',#11945,#11946);+#11945 = CARTESIAN_POINT('',(0.37744086234,-0.1));+#11946 = VECTOR('',#11947,1.);+#11947 = DIRECTION('',(0.,1.));+#11948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11949 = ORIENTED_EDGE('',*,*,#11781,.T.);+#11950 = ORIENTED_EDGE('',*,*,#11905,.F.);+#11951 = ORIENTED_EDGE('',*,*,#11327,.T.);+#11952 = ADVANCED_FACE('',(#11953),#11315,.T.);+#11953 = FACE_BOUND('',#11954,.F.);+#11954 = EDGE_LOOP('',(#11955,#11956,#11977,#11978));+#11955 = ORIENTED_EDGE('',*,*,#11299,.T.);+#11956 = ORIENTED_EDGE('',*,*,#11957,.F.);+#11957 = EDGE_CURVE('',#11805,#11272,#11958,.T.);+#11958 = SURFACE_CURVE('',#11959,(#11963,#11970),.PCURVE_S1.);+#11959 = LINE('',#11960,#11961);+#11960 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+    9.314404469578E-02));+#11961 = VECTOR('',#11962,1.);+#11962 = DIRECTION('',(0.,0.,1.));+#11963 = PCURVE('',#11315,#11964);+#11964 = DEFINITIONAL_REPRESENTATION('',(#11965),#11969);+#11965 = LINE('',#11966,#11967);+#11966 = CARTESIAN_POINT('',(0.652440862341,-0.1));+#11967 = VECTOR('',#11968,1.);+#11968 = DIRECTION('',(0.,1.));+#11969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11970 = PCURVE('',#11287,#11971);+#11971 = DEFINITIONAL_REPRESENTATION('',(#11972),#11976);+#11972 = LINE('',#11973,#11974);+#11973 = CARTESIAN_POINT('',(7.707720793884E-02,0.));+#11974 = VECTOR('',#11975,1.);+#11975 = DIRECTION('',(0.,1.));+#11976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11977 = ORIENTED_EDGE('',*,*,#11804,.F.);+#11978 = ORIENTED_EDGE('',*,*,#11929,.T.);+#11979 = ADVANCED_FACE('',(#11980),#11287,.F.);+#11980 = FACE_BOUND('',#11981,.F.);+#11981 = EDGE_LOOP('',(#11982,#11983,#11984,#12005));+#11982 = ORIENTED_EDGE('',*,*,#11957,.T.);+#11983 = ORIENTED_EDGE('',*,*,#11271,.T.);+#11984 = ORIENTED_EDGE('',*,*,#11985,.T.);+#11985 = EDGE_CURVE('',#11244,#11828,#11986,.T.);+#11986 = SURFACE_CURVE('',#11987,(#11991,#11998),.PCURVE_S1.);+#11987 = LINE('',#11988,#11989);+#11988 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+    0.193144044696));+#11989 = VECTOR('',#11990,1.);+#11990 = DIRECTION('',(0.,0.,-1.));+#11991 = PCURVE('',#11287,#11992);+#11992 = DEFINITIONAL_REPRESENTATION('',(#11993),#11997);+#11993 = LINE('',#11994,#11995);+#11994 = CARTESIAN_POINT('',(0.,0.1));+#11995 = VECTOR('',#11996,1.);+#11996 = DIRECTION('',(0.,-1.));+#11997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#11998 = PCURVE('',#11259,#11999);+#11999 = DEFINITIONAL_REPRESENTATION('',(#12000),#12004);+#12000 = LINE('',#12001,#12002);+#12001 = CARTESIAN_POINT('',(7.00000000045E-02,0.1));+#12002 = VECTOR('',#12003,1.);+#12003 = DIRECTION('',(0.,-1.));+#12004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12005 = ORIENTED_EDGE('',*,*,#11827,.T.);+#12006 = ADVANCED_FACE('',(#12007),#11259,.F.);+#12007 = FACE_BOUND('',#12008,.F.);+#12008 = EDGE_LOOP('',(#12009,#12010,#12011,#12012));+#12009 = ORIENTED_EDGE('',*,*,#11850,.F.);+#12010 = ORIENTED_EDGE('',*,*,#11985,.F.);+#12011 = ORIENTED_EDGE('',*,*,#11243,.F.);+#12012 = ORIENTED_EDGE('',*,*,#11709,.T.);+#12013 = ADVANCED_FACE('',(#12014),#3849,.F.);+#12014 = FACE_BOUND('',#12015,.F.);+#12015 = EDGE_LOOP('',(#12016,#12017,#12018,#12039));+#12016 = ORIENTED_EDGE('',*,*,#9612,.F.);+#12017 = ORIENTED_EDGE('',*,*,#3826,.F.);+#12018 = ORIENTED_EDGE('',*,*,#12019,.F.);+#12019 = EDGE_CURVE('',#9818,#3827,#12020,.T.);+#12020 = SURFACE_CURVE('',#12021,(#12025,#12032),.PCURVE_S1.);+#12021 = LINE('',#12022,#12023);+#12022 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+    9.314404469578E-02));+#12023 = VECTOR('',#12024,1.);+#12024 = DIRECTION('',(0.,0.,-1.));+#12025 = PCURVE('',#3849,#12026);+#12026 = DEFINITIONAL_REPRESENTATION('',(#12027),#12031);+#12027 = LINE('',#12028,#12029);+#12028 = CARTESIAN_POINT('',(4.470391181211E-12,0.));+#12029 = VECTOR('',#12030,1.);+#12030 = DIRECTION('',(0.,1.));+#12031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12032 = PCURVE('',#3982,#12033);+#12033 = DEFINITIONAL_REPRESENTATION('',(#12034),#12038);+#12034 = LINE('',#12035,#12036);+#12035 = CARTESIAN_POINT('',(-6.625000104066E-09,0.));+#12036 = VECTOR('',#12037,1.);+#12037 = DIRECTION('',(0.,-1.));+#12038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12039 = ORIENTED_EDGE('',*,*,#9817,.T.);+#12040 = ADVANCED_FACE('',(#12041),#3982,.F.);+#12041 = FACE_BOUND('',#12042,.F.);+#12042 = EDGE_LOOP('',(#12043,#12044,#12065,#12066));+#12043 = ORIENTED_EDGE('',*,*,#3968,.T.);+#12044 = ORIENTED_EDGE('',*,*,#12045,.T.);+#12045 = EDGE_CURVE('',#3941,#9841,#12046,.T.);+#12046 = SURFACE_CURVE('',#12047,(#12051,#12058),.PCURVE_S1.);+#12047 = LINE('',#12048,#12049);+#12048 = CARTESIAN_POINT('',(3.29946203942,0.560692661497,0.));+#12049 = VECTOR('',#12050,1.);+#12050 = DIRECTION('',(0.,0.,1.));+#12051 = PCURVE('',#3982,#12052);+#12052 = DEFINITIONAL_REPRESENTATION('',(#12053),#12057);+#12053 = LINE('',#12054,#12055);+#12054 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12055 = VECTOR('',#12056,1.);+#12056 = DIRECTION('',(0.,1.));+#12057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12058 = PCURVE('',#3956,#12059);+#12059 = DEFINITIONAL_REPRESENTATION('',(#12060),#12064);+#12060 = LINE('',#12061,#12062);+#12061 = CARTESIAN_POINT('',(0.250000000001,9.314404469578E-02));+#12062 = VECTOR('',#12063,1.);+#12063 = DIRECTION('',(0.,-1.));+#12064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12065 = ORIENTED_EDGE('',*,*,#9840,.F.);+#12066 = ORIENTED_EDGE('',*,*,#12019,.T.);+#12067 = ADVANCED_FACE('',(#12068),#3956,.F.);+#12068 = FACE_BOUND('',#12069,.F.);+#12069 = EDGE_LOOP('',(#12070,#12071,#12092,#12093));+#12070 = ORIENTED_EDGE('',*,*,#3940,.F.);+#12071 = ORIENTED_EDGE('',*,*,#12072,.T.);+#12072 = EDGE_CURVE('',#3913,#9864,#12073,.T.);+#12073 = SURFACE_CURVE('',#12074,(#12078,#12085),.PCURVE_S1.);+#12074 = LINE('',#12075,#12076);+#12075 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#12076 = VECTOR('',#12077,1.);+#12077 = DIRECTION('',(0.,0.,1.));+#12078 = PCURVE('',#3956,#12079);+#12079 = DEFINITIONAL_REPRESENTATION('',(#12080),#12084);+#12080 = LINE('',#12081,#12082);+#12081 = CARTESIAN_POINT('',(-4.000022535422E-12,9.314404469578E-02));+#12082 = VECTOR('',#12083,1.);+#12083 = DIRECTION('',(0.,-1.));+#12084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12085 = PCURVE('',#3928,#12086);+#12086 = DEFINITIONAL_REPRESENTATION('',(#12087),#12091);+#12087 = LINE('',#12088,#12089);+#12088 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#12089 = VECTOR('',#12090,1.);+#12090 = DIRECTION('',(0.,1.));+#12091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12092 = ORIENTED_EDGE('',*,*,#9863,.T.);+#12093 = ORIENTED_EDGE('',*,*,#12045,.F.);+#12094 = ADVANCED_FACE('',(#12095),#3928,.F.);+#12095 = FACE_BOUND('',#12096,.F.);+#12096 = EDGE_LOOP('',(#12097,#12098,#12119,#12120));+#12097 = ORIENTED_EDGE('',*,*,#3912,.T.);+#12098 = ORIENTED_EDGE('',*,*,#12099,.T.);+#12099 = EDGE_CURVE('',#3885,#9887,#12100,.T.);+#12100 = SURFACE_CURVE('',#12101,(#12105,#12112),.PCURVE_S1.);+#12101 = LINE('',#12102,#12103);+#12102 = CARTESIAN_POINT('',(3.424462039434,0.810692661502,0.));+#12103 = VECTOR('',#12104,1.);+#12104 = DIRECTION('',(0.,0.,1.));+#12105 = PCURVE('',#3928,#12106);+#12106 = DEFINITIONAL_REPRESENTATION('',(#12107),#12111);+#12107 = LINE('',#12108,#12109);+#12108 = CARTESIAN_POINT('',(7.5000000022E-02,-9.314404469578E-02));+#12109 = VECTOR('',#12110,1.);+#12110 = DIRECTION('',(0.,1.));+#12111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12112 = PCURVE('',#3900,#12113);+#12113 = DEFINITIONAL_REPRESENTATION('',(#12114),#12118);+#12114 = LINE('',#12115,#12116);+#12115 = CARTESIAN_POINT('',(8.27647267759E-02,9.314404469578E-02));+#12116 = VECTOR('',#12117,1.);+#12117 = DIRECTION('',(0.,-1.));+#12118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12119 = ORIENTED_EDGE('',*,*,#9886,.F.);+#12120 = ORIENTED_EDGE('',*,*,#12072,.F.);+#12121 = ADVANCED_FACE('',(#12122),#3900,.F.);+#12122 = FACE_BOUND('',#12123,.F.);+#12123 = EDGE_LOOP('',(#12124,#12125,#12126,#12127));+#12124 = ORIENTED_EDGE('',*,*,#9590,.T.);+#12125 = ORIENTED_EDGE('',*,*,#9909,.T.);+#12126 = ORIENTED_EDGE('',*,*,#12099,.F.);+#12127 = ORIENTED_EDGE('',*,*,#3884,.F.);+#12128 = ADVANCED_FACE('',(#12129),#4020,.F.);+#12129 = FACE_BOUND('',#12130,.F.);+#12130 = EDGE_LOOP('',(#12131,#12132,#12133,#12154));+#12131 = ORIENTED_EDGE('',*,*,#9437,.F.);+#12132 = ORIENTED_EDGE('',*,*,#3997,.F.);+#12133 = ORIENTED_EDGE('',*,*,#12134,.F.);+#12134 = EDGE_CURVE('',#10005,#3998,#12135,.T.);+#12135 = SURFACE_CURVE('',#12136,(#12140,#12147),.PCURVE_S1.);+#12136 = LINE('',#12137,#12138);+#12137 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+    9.314404469578E-02));+#12138 = VECTOR('',#12139,1.);+#12139 = DIRECTION('',(0.,0.,-1.));+#12140 = PCURVE('',#4020,#12141);+#12141 = DEFINITIONAL_REPRESENTATION('',(#12142),#12146);+#12142 = LINE('',#12143,#12144);+#12143 = CARTESIAN_POINT('',(0.,0.));+#12144 = VECTOR('',#12145,1.);+#12145 = DIRECTION('',(0.,1.));+#12146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12147 = PCURVE('',#4153,#12148);+#12148 = DEFINITIONAL_REPRESENTATION('',(#12149),#12153);+#12149 = LINE('',#12150,#12151);+#12150 = CARTESIAN_POINT('',(-6.621000192553E-09,0.));+#12151 = VECTOR('',#12152,1.);+#12152 = DIRECTION('',(0.,-1.));+#12153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12154 = ORIENTED_EDGE('',*,*,#10004,.T.);+#12155 = ADVANCED_FACE('',(#12156),#4153,.F.);+#12156 = FACE_BOUND('',#12157,.F.);+#12157 = EDGE_LOOP('',(#12158,#12159,#12180,#12181));+#12158 = ORIENTED_EDGE('',*,*,#4139,.T.);+#12159 = ORIENTED_EDGE('',*,*,#12160,.T.);+#12160 = EDGE_CURVE('',#4112,#10028,#12161,.T.);+#12161 = SURFACE_CURVE('',#12162,(#12166,#12173),.PCURVE_S1.);+#12162 = LINE('',#12163,#12164);+#12163 = CARTESIAN_POINT('',(3.29946203942,1.060692661499,0.));+#12164 = VECTOR('',#12165,1.);+#12165 = DIRECTION('',(0.,0.,1.));+#12166 = PCURVE('',#4153,#12167);+#12167 = DEFINITIONAL_REPRESENTATION('',(#12168),#12172);+#12168 = LINE('',#12169,#12170);+#12169 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12170 = VECTOR('',#12171,1.);+#12171 = DIRECTION('',(0.,1.));+#12172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12173 = PCURVE('',#4127,#12174);+#12174 = DEFINITIONAL_REPRESENTATION('',(#12175),#12179);+#12175 = LINE('',#12176,#12177);+#12176 = CARTESIAN_POINT('',(0.25,9.314404469578E-02));+#12177 = VECTOR('',#12178,1.);+#12178 = DIRECTION('',(0.,-1.));+#12179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12180 = ORIENTED_EDGE('',*,*,#10027,.F.);+#12181 = ORIENTED_EDGE('',*,*,#12134,.T.);+#12182 = ADVANCED_FACE('',(#12183),#4127,.F.);+#12183 = FACE_BOUND('',#12184,.F.);+#12184 = EDGE_LOOP('',(#12185,#12186,#12207,#12208));+#12185 = ORIENTED_EDGE('',*,*,#4111,.F.);+#12186 = ORIENTED_EDGE('',*,*,#12187,.T.);+#12187 = EDGE_CURVE('',#4084,#10051,#12188,.T.);+#12188 = SURFACE_CURVE('',#12189,(#12193,#12200),.PCURVE_S1.);+#12189 = LINE('',#12190,#12191);+#12190 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#12191 = VECTOR('',#12192,1.);+#12192 = DIRECTION('',(0.,0.,1.));+#12193 = PCURVE('',#4127,#12194);+#12194 = DEFINITIONAL_REPRESENTATION('',(#12195),#12199);+#12195 = LINE('',#12196,#12197);+#12196 = CARTESIAN_POINT('',(3.99991151312E-12,9.314404469578E-02));+#12197 = VECTOR('',#12198,1.);+#12198 = DIRECTION('',(0.,-1.));+#12199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12200 = PCURVE('',#4099,#12201);+#12201 = DEFINITIONAL_REPRESENTATION('',(#12202),#12206);+#12202 = LINE('',#12203,#12204);+#12203 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#12204 = VECTOR('',#12205,1.);+#12205 = DIRECTION('',(0.,1.));+#12206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12207 = ORIENTED_EDGE('',*,*,#10050,.T.);+#12208 = ORIENTED_EDGE('',*,*,#12160,.F.);+#12209 = ADVANCED_FACE('',(#12210),#4099,.F.);+#12210 = FACE_BOUND('',#12211,.F.);+#12211 = EDGE_LOOP('',(#12212,#12213,#12234,#12235));+#12212 = ORIENTED_EDGE('',*,*,#4083,.T.);+#12213 = ORIENTED_EDGE('',*,*,#12214,.T.);+#12214 = EDGE_CURVE('',#4056,#10074,#12215,.T.);+#12215 = SURFACE_CURVE('',#12216,(#12220,#12227),.PCURVE_S1.);+#12216 = LINE('',#12217,#12218);+#12217 = CARTESIAN_POINT('',(3.42446203942,1.310692661495,0.));+#12218 = VECTOR('',#12219,1.);+#12219 = DIRECTION('',(0.,0.,1.));+#12220 = PCURVE('',#4099,#12221);+#12221 = DEFINITIONAL_REPRESENTATION('',(#12222),#12226);+#12222 = LINE('',#12223,#12224);+#12223 = CARTESIAN_POINT('',(7.5000006611E-02,-9.314404469578E-02));+#12224 = VECTOR('',#12225,1.);+#12225 = DIRECTION('',(0.,1.));+#12226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12227 = PCURVE('',#4071,#12228);+#12228 = DEFINITIONAL_REPRESENTATION('',(#12229),#12233);+#12229 = LINE('',#12230,#12231);+#12230 = CARTESIAN_POINT('',(8.276472679155E-02,9.314404469578E-02));+#12231 = VECTOR('',#12232,1.);+#12232 = DIRECTION('',(0.,-1.));+#12233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12234 = ORIENTED_EDGE('',*,*,#10073,.F.);+#12235 = ORIENTED_EDGE('',*,*,#12187,.F.);+#12236 = ADVANCED_FACE('',(#12237),#4071,.F.);+#12237 = FACE_BOUND('',#12238,.F.);+#12238 = EDGE_LOOP('',(#12239,#12240,#12241,#12242));+#12239 = ORIENTED_EDGE('',*,*,#9415,.T.);+#12240 = ORIENTED_EDGE('',*,*,#10096,.T.);+#12241 = ORIENTED_EDGE('',*,*,#12214,.F.);+#12242 = ORIENTED_EDGE('',*,*,#4055,.F.);+#12243 = ADVANCED_FACE('',(#12244),#3678,.F.);+#12244 = FACE_BOUND('',#12245,.F.);+#12245 = EDGE_LOOP('',(#12246,#12247,#12248,#12269));+#12246 = ORIENTED_EDGE('',*,*,#9262,.F.);+#12247 = ORIENTED_EDGE('',*,*,#3655,.F.);+#12248 = ORIENTED_EDGE('',*,*,#12249,.F.);+#12249 = EDGE_CURVE('',#10192,#3656,#12250,.T.);+#12250 = SURFACE_CURVE('',#12251,(#12255,#12262),.PCURVE_S1.);+#12251 = LINE('',#12252,#12253);+#12252 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+    9.314404469578E-02));+#12253 = VECTOR('',#12254,1.);+#12254 = DIRECTION('',(0.,0.,-1.));+#12255 = PCURVE('',#3678,#12256);+#12256 = DEFINITIONAL_REPRESENTATION('',(#12257),#12261);+#12257 = LINE('',#12258,#12259);+#12258 = CARTESIAN_POINT('',(-4.470391181211E-12,0.));+#12259 = VECTOR('',#12260,1.);+#12260 = DIRECTION('',(0.,1.));+#12261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12262 = PCURVE('',#3811,#12263);+#12263 = DEFINITIONAL_REPRESENTATION('',(#12264),#12268);+#12264 = LINE('',#12265,#12266);+#12265 = CARTESIAN_POINT('',(-6.61700028104E-09,0.));+#12266 = VECTOR('',#12267,1.);+#12267 = DIRECTION('',(0.,-1.));+#12268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12269 = ORIENTED_EDGE('',*,*,#10191,.T.);+#12270 = ADVANCED_FACE('',(#12271),#3811,.F.);+#12271 = FACE_BOUND('',#12272,.F.);+#12272 = EDGE_LOOP('',(#12273,#12274,#12295,#12296));+#12273 = ORIENTED_EDGE('',*,*,#3797,.T.);+#12274 = ORIENTED_EDGE('',*,*,#12275,.T.);+#12275 = EDGE_CURVE('',#3770,#10215,#12276,.T.);+#12276 = SURFACE_CURVE('',#12277,(#12281,#12288),.PCURVE_S1.);+#12277 = LINE('',#12278,#12279);+#12278 = CARTESIAN_POINT('',(3.29946203942,1.560692661501,0.));+#12279 = VECTOR('',#12280,1.);+#12280 = DIRECTION('',(0.,0.,1.));+#12281 = PCURVE('',#3811,#12282);+#12282 = DEFINITIONAL_REPRESENTATION('',(#12283),#12287);+#12283 = LINE('',#12284,#12285);+#12284 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12285 = VECTOR('',#12286,1.);+#12286 = DIRECTION('',(0.,1.));+#12287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12288 = PCURVE('',#3785,#12289);+#12289 = DEFINITIONAL_REPRESENTATION('',(#12290),#12294);+#12290 = LINE('',#12291,#12292);+#12291 = CARTESIAN_POINT('',(0.249999999998,9.314404469578E-02));+#12292 = VECTOR('',#12293,1.);+#12293 = DIRECTION('',(0.,-1.));+#12294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12295 = ORIENTED_EDGE('',*,*,#10214,.F.);+#12296 = ORIENTED_EDGE('',*,*,#12249,.T.);+#12297 = ADVANCED_FACE('',(#12298),#3785,.F.);+#12298 = FACE_BOUND('',#12299,.F.);+#12299 = EDGE_LOOP('',(#12300,#12301,#12322,#12323));+#12300 = ORIENTED_EDGE('',*,*,#3769,.F.);+#12301 = ORIENTED_EDGE('',*,*,#12302,.T.);+#12302 = EDGE_CURVE('',#3742,#10238,#12303,.T.);+#12303 = SURFACE_CURVE('',#12304,(#12308,#12315),.PCURVE_S1.);+#12304 = LINE('',#12305,#12306);+#12305 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#12306 = VECTOR('',#12307,1.);+#12307 = DIRECTION('',(0.,0.,1.));+#12308 = PCURVE('',#3785,#12309);+#12309 = DEFINITIONAL_REPRESENTATION('',(#12310),#12314);+#12310 = LINE('',#12311,#12312);+#12311 = CARTESIAN_POINT('',(1.99995575656E-12,9.314404469578E-02));+#12312 = VECTOR('',#12313,1.);+#12313 = DIRECTION('',(0.,-1.));+#12314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12315 = PCURVE('',#3757,#12316);+#12316 = DEFINITIONAL_REPRESENTATION('',(#12317),#12321);+#12317 = LINE('',#12318,#12319);+#12318 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#12319 = VECTOR('',#12320,1.);+#12320 = DIRECTION('',(0.,1.));+#12321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12322 = ORIENTED_EDGE('',*,*,#10237,.T.);+#12323 = ORIENTED_EDGE('',*,*,#12275,.F.);+#12324 = ADVANCED_FACE('',(#12325),#3757,.F.);+#12325 = FACE_BOUND('',#12326,.F.);+#12326 = EDGE_LOOP('',(#12327,#12328,#12349,#12350));+#12327 = ORIENTED_EDGE('',*,*,#3741,.T.);+#12328 = ORIENTED_EDGE('',*,*,#12329,.T.);+#12329 = EDGE_CURVE('',#3714,#10261,#12330,.T.);+#12330 = SURFACE_CURVE('',#12331,(#12335,#12342),.PCURVE_S1.);+#12331 = LINE('',#12332,#12333);+#12332 = CARTESIAN_POINT('',(3.424462039423,1.810692661497,0.));+#12333 = VECTOR('',#12334,1.);+#12334 = DIRECTION('',(0.,0.,1.));+#12335 = PCURVE('',#3757,#12336);+#12336 = DEFINITIONAL_REPRESENTATION('',(#12337),#12341);+#12337 = LINE('',#12338,#12339);+#12338 = CARTESIAN_POINT('',(7.5000000011E-02,-9.314404469578E-02));+#12339 = VECTOR('',#12340,1.);+#12340 = DIRECTION('',(0.,1.));+#12341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12342 = PCURVE('',#3729,#12343);+#12343 = DEFINITIONAL_REPRESENTATION('',(#12344),#12348);+#12344 = LINE('',#12345,#12346);+#12345 = CARTESIAN_POINT('',(8.276472678799E-02,9.314404469578E-02));+#12346 = VECTOR('',#12347,1.);+#12347 = DIRECTION('',(0.,-1.));+#12348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12349 = ORIENTED_EDGE('',*,*,#10260,.F.);+#12350 = ORIENTED_EDGE('',*,*,#12302,.F.);+#12351 = ADVANCED_FACE('',(#12352),#3729,.F.);+#12352 = FACE_BOUND('',#12353,.F.);+#12353 = EDGE_LOOP('',(#12354,#12355,#12356,#12357));+#12354 = ORIENTED_EDGE('',*,*,#9240,.T.);+#12355 = ORIENTED_EDGE('',*,*,#10283,.T.);+#12356 = ORIENTED_EDGE('',*,*,#12329,.F.);+#12357 = ORIENTED_EDGE('',*,*,#3713,.F.);+#12358 = ADVANCED_FACE('',(#12359),#3563,.F.);+#12359 = FACE_BOUND('',#12360,.F.);+#12360 = EDGE_LOOP('',(#12361,#12362,#12363,#12384));+#12361 = ORIENTED_EDGE('',*,*,#9087,.F.);+#12362 = ORIENTED_EDGE('',*,*,#3547,.T.);+#12363 = ORIENTED_EDGE('',*,*,#12364,.T.);+#12364 = EDGE_CURVE('',#3520,#10379,#12365,.T.);+#12365 = SURFACE_CURVE('',#12366,(#12370,#12377),.PCURVE_S1.);+#12366 = LINE('',#12367,#12368);+#12367 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,0.));+#12368 = VECTOR('',#12369,1.);+#12369 = DIRECTION('',(0.,0.,1.));+#12370 = PCURVE('',#3563,#12371);+#12371 = DEFINITIONAL_REPRESENTATION('',(#12372),#12376);+#12372 = LINE('',#12373,#12374);+#12373 = CARTESIAN_POINT('',(8.276473409007E-02,-9.314404469578E-02));+#12374 = VECTOR('',#12375,1.);+#12375 = DIRECTION('',(0.,1.));+#12376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12377 = PCURVE('',#3535,#12378);+#12378 = DEFINITIONAL_REPRESENTATION('',(#12379),#12383);+#12379 = LINE('',#12380,#12381);+#12380 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12381 = VECTOR('',#12382,1.);+#12382 = DIRECTION('',(0.,1.));+#12383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12384 = ORIENTED_EDGE('',*,*,#10378,.T.);+#12385 = ADVANCED_FACE('',(#12386),#3535,.F.);+#12386 = FACE_BOUND('',#12387,.F.);+#12387 = EDGE_LOOP('',(#12388,#12389,#12410,#12411));+#12388 = ORIENTED_EDGE('',*,*,#3519,.T.);+#12389 = ORIENTED_EDGE('',*,*,#12390,.T.);+#12390 = EDGE_CURVE('',#3492,#10402,#12391,.T.);+#12391 = SURFACE_CURVE('',#12392,(#12396,#12403),.PCURVE_S1.);+#12392 = LINE('',#12393,#12394);+#12393 = CARTESIAN_POINT('',(3.29946203942,2.060692661502,0.));+#12394 = VECTOR('',#12395,1.);+#12395 = DIRECTION('',(0.,0.,1.));+#12396 = PCURVE('',#3535,#12397);+#12397 = DEFINITIONAL_REPRESENTATION('',(#12398),#12402);+#12398 = LINE('',#12399,#12400);+#12399 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12400 = VECTOR('',#12401,1.);+#12401 = DIRECTION('',(0.,1.));+#12402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12403 = PCURVE('',#3507,#12404);+#12404 = DEFINITIONAL_REPRESENTATION('',(#12405),#12409);+#12405 = LINE('',#12406,#12407);+#12406 = CARTESIAN_POINT('',(0.199906852712,9.314404469578E-02));+#12407 = VECTOR('',#12408,1.);+#12408 = DIRECTION('',(0.,-1.));+#12409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12410 = ORIENTED_EDGE('',*,*,#10401,.F.);+#12411 = ORIENTED_EDGE('',*,*,#12364,.F.);+#12412 = ADVANCED_FACE('',(#12413),#3507,.F.);+#12413 = FACE_BOUND('',#12414,.F.);+#12414 = EDGE_LOOP('',(#12415,#12416,#12437,#12438));+#12415 = ORIENTED_EDGE('',*,*,#3491,.F.);+#12416 = ORIENTED_EDGE('',*,*,#12417,.T.);+#12417 = EDGE_CURVE('',#3464,#10425,#12418,.T.);+#12418 = SURFACE_CURVE('',#12419,(#12423,#12430),.PCURVE_S1.);+#12419 = LINE('',#12420,#12421);+#12420 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,0.));+#12421 = VECTOR('',#12422,1.);+#12422 = DIRECTION('',(0.,0.,1.));+#12423 = PCURVE('',#3507,#12424);+#12424 = DEFINITIONAL_REPRESENTATION('',(#12425),#12429);+#12425 = LINE('',#12426,#12427);+#12426 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#12427 = VECTOR('',#12428,1.);+#12428 = DIRECTION('',(0.,-1.));+#12429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12430 = PCURVE('',#3479,#12431);+#12431 = DEFINITIONAL_REPRESENTATION('',(#12432),#12436);+#12432 = LINE('',#12433,#12434);+#12433 = CARTESIAN_POINT('',(0.999959484307,9.314404469578E-02));+#12434 = VECTOR('',#12435,1.);+#12435 = DIRECTION('',(0.,-1.));+#12436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12437 = ORIENTED_EDGE('',*,*,#10424,.T.);+#12438 = ORIENTED_EDGE('',*,*,#12390,.F.);+#12439 = ADVANCED_FACE('',(#12440),#3479,.F.);+#12440 = FACE_BOUND('',#12441,.F.);+#12441 = EDGE_LOOP('',(#12442,#12443,#12464,#12465));+#12442 = ORIENTED_EDGE('',*,*,#3463,.F.);+#12443 = ORIENTED_EDGE('',*,*,#12444,.F.);+#12444 = EDGE_CURVE('',#10448,#3431,#12445,.T.);+#12445 = SURFACE_CURVE('',#12446,(#12450,#12457),.PCURVE_S1.);+#12446 = LINE('',#12447,#12448);+#12447 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+    9.314404469578E-02));+#12448 = VECTOR('',#12449,1.);+#12449 = DIRECTION('',(-1.144264356483E-13,0.,-1.));+#12450 = PCURVE('',#3479,#12451);+#12451 = DEFINITIONAL_REPRESENTATION('',(#12452),#12456);+#12452 = LINE('',#12453,#12454);+#12453 = CARTESIAN_POINT('',(0.,0.));+#12454 = VECTOR('',#12455,1.);+#12455 = DIRECTION('',(-1.144264356483E-13,1.));+#12456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12457 = PCURVE('',#3451,#12458);+#12458 = DEFINITIONAL_REPRESENTATION('',(#12459),#12463);+#12459 = LINE('',#12460,#12461);+#12460 = CARTESIAN_POINT('',(4.712388980355,0.));+#12461 = VECTOR('',#12462,1.);+#12462 = DIRECTION('',(-1.144264356483E-12,1.));+#12463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12464 = ORIENTED_EDGE('',*,*,#10447,.T.);+#12465 = ORIENTED_EDGE('',*,*,#12417,.F.);+#12466 = ADVANCED_FACE('',(#12467),#3451,.F.);+#12467 = FACE_BOUND('',#12468,.F.);+#12468 = EDGE_LOOP('',(#12469,#12470,#12491,#12492));+#12469 = ORIENTED_EDGE('',*,*,#3430,.F.);+#12470 = ORIENTED_EDGE('',*,*,#12471,.T.);+#12471 = EDGE_CURVE('',#3403,#10471,#12472,.T.);+#12472 = SURFACE_CURVE('',#12473,(#12477,#12484),.PCURVE_S1.);+#12473 = LINE('',#12474,#12475);+#12474 = CARTESIAN_POINT('',(2.199462039414,2.160599510107,0.));+#12475 = VECTOR('',#12476,1.);+#12476 = DIRECTION('',(0.,3.50907735988E-11,1.));+#12477 = PCURVE('',#3451,#12478);+#12478 = DEFINITIONAL_REPRESENTATION('',(#12479),#12483);+#12479 = LINE('',#12480,#12481);+#12480 = CARTESIAN_POINT('',(3.14159265358,9.314404469578E-02));+#12481 = VECTOR('',#12482,1.);+#12482 = DIRECTION('',(3.50907735988E-10,-1.));+#12483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12484 = PCURVE('',#3418,#12485);+#12485 = DEFINITIONAL_REPRESENTATION('',(#12486),#12490);+#12486 = LINE('',#12487,#12488);+#12487 = CARTESIAN_POINT('',(1.849906848552,9.314404469578E-02));+#12488 = VECTOR('',#12489,1.);+#12489 = DIRECTION('',(3.50907735988E-11,-1.));+#12490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12491 = ORIENTED_EDGE('',*,*,#10470,.T.);+#12492 = ORIENTED_EDGE('',*,*,#12444,.T.);+#12493 = ADVANCED_FACE('',(#12494),#3418,.F.);+#12494 = FACE_BOUND('',#12495,.F.);+#12495 = EDGE_LOOP('',(#12496,#12497,#12518,#12519));+#12496 = ORIENTED_EDGE('',*,*,#3402,.F.);+#12497 = ORIENTED_EDGE('',*,*,#12498,.F.);+#12498 = EDGE_CURVE('',#10499,#3370,#12499,.T.);+#12499 = SURFACE_CURVE('',#12500,(#12504,#12511),.PCURVE_S1.);+#12500 = LINE('',#12501,#12502);+#12501 = CARTESIAN_POINT('',(2.199462039417,0.310692661587,+    9.314404469578E-02));+#12502 = VECTOR('',#12503,1.);+#12503 = DIRECTION('',(0.,-6.832092567628E-11,-1.));+#12504 = PCURVE('',#3418,#12505);+#12505 = DEFINITIONAL_REPRESENTATION('',(#12506),#12510);+#12506 = LINE('',#12507,#12508);+#12507 = CARTESIAN_POINT('',(3.199995823877E-11,0.));+#12508 = VECTOR('',#12509,1.);+#12509 = DIRECTION('',(-6.832092567628E-11,1.));+#12510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12511 = PCURVE('',#3390,#12512);+#12512 = DEFINITIONAL_REPRESENTATION('',(#12513),#12517);+#12513 = LINE('',#12514,#12515);+#12514 = CARTESIAN_POINT('',(4.712388980725,0.));+#12515 = VECTOR('',#12516,1.);+#12516 = DIRECTION('',(-6.832116406469E-10,1.));+#12517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12518 = ORIENTED_EDGE('',*,*,#10498,.T.);+#12519 = ORIENTED_EDGE('',*,*,#12471,.F.);+#12520 = ADVANCED_FACE('',(#12521),#3390,.F.);+#12521 = FACE_BOUND('',#12522,.F.);+#12522 = EDGE_LOOP('',(#12523,#12524,#12545,#12546));+#12523 = ORIENTED_EDGE('',*,*,#3369,.F.);+#12524 = ORIENTED_EDGE('',*,*,#12525,.T.);+#12525 = EDGE_CURVE('',#3342,#10522,#12526,.T.);+#12526 = SURFACE_CURVE('',#12527,(#12531,#12538),.PCURVE_S1.);+#12527 = LINE('',#12528,#12529);+#12528 = CARTESIAN_POINT('',(2.299462039438,0.210692661554,0.));+#12529 = VECTOR('',#12530,1.);+#12530 = DIRECTION('',(1.061162157593E-10,0.,1.));+#12531 = PCURVE('',#3390,#12532);+#12532 = DEFINITIONAL_REPRESENTATION('',(#12533),#12537);+#12533 = LINE('',#12534,#12535);+#12534 = CARTESIAN_POINT('',(3.14159265337,9.314404469578E-02));+#12535 = VECTOR('',#12536,1.);+#12536 = DIRECTION('',(-1.061162157593E-09,-1.));+#12537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12538 = PCURVE('',#3357,#12539);+#12539 = DEFINITIONAL_REPRESENTATION('',(#12540),#12544);+#12540 = LINE('',#12541,#12542);+#12541 = CARTESIAN_POINT('',(0.999999999982,9.314404469578E-02));+#12542 = VECTOR('',#12543,1.);+#12543 = DIRECTION('',(-1.061162157593E-10,-1.));+#12544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12545 = ORIENTED_EDGE('',*,*,#10521,.T.);+#12546 = ORIENTED_EDGE('',*,*,#12498,.T.);+#12547 = ADVANCED_FACE('',(#12548),#3357,.F.);+#12548 = FACE_BOUND('',#12549,.F.);+#12549 = EDGE_LOOP('',(#12550,#12551,#12572,#12573));+#12550 = ORIENTED_EDGE('',*,*,#3341,.F.);+#12551 = ORIENTED_EDGE('',*,*,#12552,.T.);+#12552 = EDGE_CURVE('',#3314,#10550,#12553,.T.);+#12553 = SURFACE_CURVE('',#12554,(#12558,#12565),.PCURVE_S1.);+#12554 = LINE('',#12555,#12556);+#12555 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,0.));+#12556 = VECTOR('',#12557,1.);+#12557 = DIRECTION('',(0.,0.,1.));+#12558 = PCURVE('',#3357,#12559);+#12559 = DEFINITIONAL_REPRESENTATION('',(#12560),#12564);+#12560 = LINE('',#12561,#12562);+#12561 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#12562 = VECTOR('',#12563,1.);+#12563 = DIRECTION('',(0.,-1.));+#12564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12565 = PCURVE('',#3329,#12566);+#12566 = DEFINITIONAL_REPRESENTATION('',(#12567),#12571);+#12567 = LINE('',#12568,#12569);+#12568 = CARTESIAN_POINT('',(0.1,9.314404469578E-02));+#12569 = VECTOR('',#12570,1.);+#12570 = DIRECTION('',(0.,-1.));+#12571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12572 = ORIENTED_EDGE('',*,*,#10549,.T.);+#12573 = ORIENTED_EDGE('',*,*,#12525,.F.);+#12574 = ADVANCED_FACE('',(#12575),#3329,.F.);+#12575 = FACE_BOUND('',#12576,.F.);+#12576 = EDGE_LOOP('',(#12577,#12578,#12599,#12600));+#12577 = ORIENTED_EDGE('',*,*,#3313,.F.);+#12578 = ORIENTED_EDGE('',*,*,#12579,.T.);+#12579 = EDGE_CURVE('',#3286,#10573,#12580,.T.);+#12580 = SURFACE_CURVE('',#12581,(#12585,#12592),.PCURVE_S1.);+#12581 = LINE('',#12582,#12583);+#12582 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#12583 = VECTOR('',#12584,1.);+#12584 = DIRECTION('',(0.,0.,1.));+#12585 = PCURVE('',#3329,#12586);+#12586 = DEFINITIONAL_REPRESENTATION('',(#12587),#12591);+#12587 = LINE('',#12588,#12589);+#12588 = CARTESIAN_POINT('',(-2.999989145991E-12,9.314404469578E-02));+#12589 = VECTOR('',#12590,1.);+#12590 = DIRECTION('',(0.,-1.));+#12591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12592 = PCURVE('',#3301,#12593);+#12593 = DEFINITIONAL_REPRESENTATION('',(#12594),#12598);+#12594 = LINE('',#12595,#12596);+#12595 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#12596 = VECTOR('',#12597,1.);+#12597 = DIRECTION('',(0.,1.));+#12598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12599 = ORIENTED_EDGE('',*,*,#10572,.T.);+#12600 = ORIENTED_EDGE('',*,*,#12552,.F.);+#12601 = ADVANCED_FACE('',(#12602),#3301,.F.);+#12602 = FACE_BOUND('',#12603,.F.);+#12603 = EDGE_LOOP('',(#12604,#12605,#12626,#12627));+#12604 = ORIENTED_EDGE('',*,*,#3285,.T.);+#12605 = ORIENTED_EDGE('',*,*,#12606,.T.);+#12606 = EDGE_CURVE('',#3258,#10596,#12607,.T.);+#12607 = SURFACE_CURVE('',#12608,(#12612,#12619),.PCURVE_S1.);+#12608 = LINE('',#12609,#12610);+#12609 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,0.));+#12610 = VECTOR('',#12611,1.);+#12611 = DIRECTION('',(0.,0.,1.));+#12612 = PCURVE('',#3301,#12613);+#12613 = DEFINITIONAL_REPRESENTATION('',(#12614),#12618);+#12614 = LINE('',#12615,#12616);+#12615 = CARTESIAN_POINT('',(7.4999999997E-02,-9.314404469578E-02));+#12616 = VECTOR('',#12617,1.);+#12617 = DIRECTION('',(0.,1.));+#12618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12619 = PCURVE('',#3273,#12620);+#12620 = DEFINITIONAL_REPRESENTATION('',(#12621),#12625);+#12621 = LINE('',#12622,#12623);+#12622 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12623 = VECTOR('',#12624,1.);+#12624 = DIRECTION('',(0.,1.));+#12625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12626 = ORIENTED_EDGE('',*,*,#10595,.F.);+#12627 = ORIENTED_EDGE('',*,*,#12579,.F.);+#12628 = ADVANCED_FACE('',(#12629),#3273,.F.);+#12629 = FACE_BOUND('',#12630,.F.);+#12630 = EDGE_LOOP('',(#12631,#12632,#12633,#12634));+#12631 = ORIENTED_EDGE('',*,*,#8521,.T.);+#12632 = ORIENTED_EDGE('',*,*,#10618,.T.);+#12633 = ORIENTED_EDGE('',*,*,#12606,.F.);+#12634 = ORIENTED_EDGE('',*,*,#3257,.T.);+#12635 = ADVANCED_FACE('',(#12636),#1105,.F.);+#12636 = FACE_BOUND('',#12637,.F.);+#12637 = EDGE_LOOP('',(#12638,#12639,#12640,#12661));+#12638 = ORIENTED_EDGE('',*,*,#8907,.F.);+#12639 = ORIENTED_EDGE('',*,*,#1089,.T.);+#12640 = ORIENTED_EDGE('',*,*,#12641,.T.);+#12641 = EDGE_CURVE('',#1062,#10717,#12642,.T.);+#12642 = SURFACE_CURVE('',#12643,(#12647,#12654),.PCURVE_S1.);+#12643 = LINE('',#12644,#12645);+#12644 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,0.));+#12645 = VECTOR('',#12646,1.);+#12646 = DIRECTION('',(0.,0.,1.));+#12647 = PCURVE('',#1105,#12648);+#12648 = DEFINITIONAL_REPRESENTATION('',(#12649),#12653);+#12649 = LINE('',#12650,#12651);+#12650 = CARTESIAN_POINT('',(8.276472678267E-02,-9.314404469578E-02));+#12651 = VECTOR('',#12652,1.);+#12652 = DIRECTION('',(0.,1.));+#12653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12654 = PCURVE('',#1077,#12655);+#12655 = DEFINITIONAL_REPRESENTATION('',(#12656),#12660);+#12656 = LINE('',#12657,#12658);+#12657 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12658 = VECTOR('',#12659,1.);+#12659 = DIRECTION('',(0.,1.));+#12660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12661 = ORIENTED_EDGE('',*,*,#10716,.T.);+#12662 = ADVANCED_FACE('',(#12663),#1077,.F.);+#12663 = FACE_BOUND('',#12664,.F.);+#12664 = EDGE_LOOP('',(#12665,#12666,#12687,#12688));+#12665 = ORIENTED_EDGE('',*,*,#1061,.T.);+#12666 = ORIENTED_EDGE('',*,*,#12667,.F.);+#12667 = EDGE_CURVE('',#10740,#1029,#12668,.T.);+#12668 = SURFACE_CURVE('',#12669,(#12673,#12680),.PCURVE_S1.);+#12669 = LINE('',#12670,#12671);+#12670 = CARTESIAN_POINT('',(2.724462046017,3.010692661495,+    9.314404469578E-02));+#12671 = VECTOR('',#12672,1.);+#12672 = DIRECTION('',(-2.360045235246E-12,0.,-1.));+#12673 = PCURVE('',#1077,#12674);+#12674 = DEFINITIONAL_REPRESENTATION('',(#12675),#12679);+#12675 = LINE('',#12676,#12677);+#12676 = CARTESIAN_POINT('',(0.69999999341,0.));+#12677 = VECTOR('',#12678,1.);+#12678 = DIRECTION('',(2.360045235246E-12,-1.));+#12679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12680 = PCURVE('',#1049,#12681);+#12681 = DEFINITIONAL_REPRESENTATION('',(#12682),#12686);+#12682 = LINE('',#12683,#12684);+#12683 = CARTESIAN_POINT('',(3.141592653606,1.416048219723E-23));+#12684 = VECTOR('',#12685,1.);+#12685 = DIRECTION('',(-1.888036188196E-11,1.));+#12686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12687 = ORIENTED_EDGE('',*,*,#10739,.F.);+#12688 = ORIENTED_EDGE('',*,*,#12641,.F.);+#12689 = ADVANCED_FACE('',(#12690),#1049,.F.);+#12690 = FACE_BOUND('',#12691,.F.);+#12691 = EDGE_LOOP('',(#12692,#12693,#12714,#12715));+#12692 = ORIENTED_EDGE('',*,*,#1026,.F.);+#12693 = ORIENTED_EDGE('',*,*,#12694,.T.);+#12694 = EDGE_CURVE('',#1027,#10763,#12695,.T.);+#12695 = SURFACE_CURVE('',#12696,(#12700,#12707),.PCURVE_S1.);+#12696 = LINE('',#12697,#12698);+#12697 = CARTESIAN_POINT('',(2.724462046003,2.760692661498,0.));+#12698 = VECTOR('',#12699,1.);+#12699 = DIRECTION('',(-1.067980066051E-11,0.,1.));+#12700 = PCURVE('',#1049,#12701);+#12701 = DEFINITIONAL_REPRESENTATION('',(#12702),#12706);+#12702 = LINE('',#12703,#12704);+#12703 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#12704 = VECTOR('',#12705,1.);+#12705 = DIRECTION('',(0.,-1.));+#12706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12707 = PCURVE('',#3640,#12708);+#12708 = DEFINITIONAL_REPRESENTATION('',(#12709),#12713);+#12709 = LINE('',#12710,#12711);+#12710 = CARTESIAN_POINT('',(-0.624999986806,-9.314404469578E-02));+#12711 = VECTOR('',#12712,1.);+#12712 = DIRECTION('',(-1.067980066051E-11,1.));+#12713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12714 = ORIENTED_EDGE('',*,*,#10762,.T.);+#12715 = ORIENTED_EDGE('',*,*,#12667,.T.);+#12716 = ADVANCED_FACE('',(#12717),#3640,.F.);+#12717 = FACE_BOUND('',#12718,.F.);+#12718 = EDGE_LOOP('',(#12719,#12720,#12741,#12742));+#12719 = ORIENTED_EDGE('',*,*,#3626,.T.);+#12720 = ORIENTED_EDGE('',*,*,#12721,.T.);+#12721 = EDGE_CURVE('',#3599,#10791,#12722,.T.);+#12722 = SURFACE_CURVE('',#12723,(#12727,#12734),.PCURVE_S1.);+#12723 = LINE('',#12724,#12725);+#12724 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,0.));+#12725 = VECTOR('',#12726,1.);+#12726 = DIRECTION('',(0.,0.,1.));+#12727 = PCURVE('',#3640,#12728);+#12728 = DEFINITIONAL_REPRESENTATION('',(#12729),#12733);+#12729 = LINE('',#12730,#12731);+#12730 = CARTESIAN_POINT('',(7.5000006618E-02,-9.314404469578E-02));+#12731 = VECTOR('',#12732,1.);+#12732 = DIRECTION('',(0.,1.));+#12733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12734 = PCURVE('',#3614,#12735);+#12735 = DEFINITIONAL_REPRESENTATION('',(#12736),#12740);+#12736 = LINE('',#12737,#12738);+#12737 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12738 = VECTOR('',#12739,1.);+#12739 = DIRECTION('',(0.,1.));+#12740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12741 = ORIENTED_EDGE('',*,*,#10790,.F.);+#12742 = ORIENTED_EDGE('',*,*,#12694,.F.);+#12743 = ADVANCED_FACE('',(#12744),#3614,.F.);+#12744 = FACE_BOUND('',#12745,.F.);+#12745 = EDGE_LOOP('',(#12746,#12747,#12748,#12749));+#12746 = ORIENTED_EDGE('',*,*,#9065,.T.);+#12747 = ORIENTED_EDGE('',*,*,#10813,.T.);+#12748 = ORIENTED_EDGE('',*,*,#12721,.F.);+#12749 = ORIENTED_EDGE('',*,*,#3598,.T.);+#12750 = ADVANCED_FACE('',(#12751),#1558,.F.);+#12751 = FACE_BOUND('',#12752,.F.);+#12752 = EDGE_LOOP('',(#12753,#12754,#12755,#12778));+#12753 = ORIENTED_EDGE('',*,*,#8547,.F.);+#12754 = ORIENTED_EDGE('',*,*,#1542,.F.);+#12755 = ORIENTED_EDGE('',*,*,#12756,.F.);+#12756 = EDGE_CURVE('',#12757,#1515,#12759,.T.);+#12757 = VERTEX_POINT('',#12758);+#12758 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+    9.314404469578E-02));+#12759 = SURFACE_CURVE('',#12760,(#12764,#12771),.PCURVE_S1.);+#12760 = LINE('',#12761,#12762);+#12761 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+    9.314404469578E-02));+#12762 = VECTOR('',#12763,1.);+#12763 = DIRECTION('',(0.,0.,-1.));+#12764 = PCURVE('',#1558,#12765);+#12765 = DEFINITIONAL_REPRESENTATION('',(#12766),#12770);+#12766 = LINE('',#12767,#12768);+#12767 = CARTESIAN_POINT('',(-2.235504117324E-12,0.));+#12768 = VECTOR('',#12769,1.);+#12769 = DIRECTION('',(0.,1.));+#12770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12771 = PCURVE('',#1530,#12772);+#12772 = DEFINITIONAL_REPRESENTATION('',(#12773),#12777);+#12773 = LINE('',#12774,#12775);+#12774 = CARTESIAN_POINT('',(-6.619000014751E-09,0.));+#12775 = VECTOR('',#12776,1.);+#12776 = DIRECTION('',(0.,-1.));+#12777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12778 = ORIENTED_EDGE('',*,*,#12779,.T.);+#12779 = EDGE_CURVE('',#12757,#8548,#12780,.T.);+#12780 = SURFACE_CURVE('',#12781,(#12785,#12792),.PCURVE_S1.);+#12781 = LINE('',#12782,#12783);+#12782 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+    9.314404469578E-02));+#12783 = VECTOR('',#12784,1.);+#12784 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#12785 = PCURVE('',#1558,#12786);+#12786 = DEFINITIONAL_REPRESENTATION('',(#12787),#12791);+#12787 = LINE('',#12788,#12789);+#12788 = CARTESIAN_POINT('',(-2.235504117324E-12,0.));+#12789 = VECTOR('',#12790,1.);+#12790 = DIRECTION('',(1.,0.));+#12791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12792 = PCURVE('',#8586,#12793);+#12793 = DEFINITIONAL_REPRESENTATION('',(#12794),#12798);+#12794 = LINE('',#12795,#12796);+#12795 = CARTESIAN_POINT('',(0.392972657348,6.5302677635E-02));+#12796 = VECTOR('',#12797,1.);+#12797 = DIRECTION('',(0.906183139987,-0.422885465348));+#12798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12799 = ADVANCED_FACE('',(#12800),#1530,.F.);+#12800 = FACE_BOUND('',#12801,.F.);+#12801 = EDGE_LOOP('',(#12802,#12803,#12826,#12847));+#12802 = ORIENTED_EDGE('',*,*,#1514,.T.);+#12803 = ORIENTED_EDGE('',*,*,#12804,.T.);+#12804 = EDGE_CURVE('',#1487,#12805,#12807,.T.);+#12805 = VERTEX_POINT('',#12806);+#12806 = CARTESIAN_POINT('',(3.29946203942,4.260692661496,+    9.314404469578E-02));+#12807 = SURFACE_CURVE('',#12808,(#12812,#12819),.PCURVE_S1.);+#12808 = LINE('',#12809,#12810);+#12809 = CARTESIAN_POINT('',(3.29946203942,4.260692661496,0.));+#12810 = VECTOR('',#12811,1.);+#12811 = DIRECTION('',(0.,0.,1.));+#12812 = PCURVE('',#1530,#12813);+#12813 = DEFINITIONAL_REPRESENTATION('',(#12814),#12818);+#12814 = LINE('',#12815,#12816);+#12815 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12816 = VECTOR('',#12817,1.);+#12817 = DIRECTION('',(0.,1.));+#12818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12819 = PCURVE('',#1502,#12820);+#12820 = DEFINITIONAL_REPRESENTATION('',(#12821),#12825);+#12821 = LINE('',#12822,#12823);+#12822 = CARTESIAN_POINT('',(0.124999999999,9.314404469578E-02));+#12823 = VECTOR('',#12824,1.);+#12824 = DIRECTION('',(0.,-1.));+#12825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12826 = ORIENTED_EDGE('',*,*,#12827,.F.);+#12827 = EDGE_CURVE('',#12757,#12805,#12828,.T.);+#12828 = SURFACE_CURVE('',#12829,(#12833,#12840),.PCURVE_S1.);+#12829 = LINE('',#12830,#12831);+#12830 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+    9.314404469578E-02));+#12831 = VECTOR('',#12832,1.);+#12832 = DIRECTION('',(-1.,0.,0.));+#12833 = PCURVE('',#1530,#12834);+#12834 = DEFINITIONAL_REPRESENTATION('',(#12835),#12839);+#12835 = LINE('',#12836,#12837);+#12836 = CARTESIAN_POINT('',(-6.619000014751E-09,0.));+#12837 = VECTOR('',#12838,1.);+#12838 = DIRECTION('',(1.,0.));+#12839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12840 = PCURVE('',#8586,#12841);+#12841 = DEFINITIONAL_REPRESENTATION('',(#12842),#12846);+#12842 = LINE('',#12843,#12844);+#12843 = CARTESIAN_POINT('',(0.392972657348,6.5302677635E-02));+#12844 = VECTOR('',#12845,1.);+#12845 = DIRECTION('',(-1.,0.));+#12846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12847 = ORIENTED_EDGE('',*,*,#12756,.T.);+#12848 = ADVANCED_FACE('',(#12849),#1502,.F.);+#12849 = FACE_BOUND('',#12850,.F.);+#12850 = EDGE_LOOP('',(#12851,#12852,#12875,#12896));+#12851 = ORIENTED_EDGE('',*,*,#1486,.F.);+#12852 = ORIENTED_EDGE('',*,*,#12853,.T.);+#12853 = EDGE_CURVE('',#1459,#12854,#12856,.T.);+#12854 = VERTEX_POINT('',#12855);+#12855 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,+    9.314404469578E-02));+#12856 = SURFACE_CURVE('',#12857,(#12861,#12868),.PCURVE_S1.);+#12857 = LINE('',#12858,#12859);+#12858 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#12859 = VECTOR('',#12860,1.);+#12860 = DIRECTION('',(0.,0.,1.));+#12861 = PCURVE('',#1502,#12862);+#12862 = DEFINITIONAL_REPRESENTATION('',(#12863),#12867);+#12863 = LINE('',#12864,#12865);+#12864 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#12865 = VECTOR('',#12866,1.);+#12866 = DIRECTION('',(0.,-1.));+#12867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12868 = PCURVE('',#1474,#12869);+#12869 = DEFINITIONAL_REPRESENTATION('',(#12870),#12874);+#12870 = LINE('',#12871,#12872);+#12871 = CARTESIAN_POINT('',(4.9999993389E-02,-9.314404469578E-02));+#12872 = VECTOR('',#12873,1.);+#12873 = DIRECTION('',(0.,1.));+#12874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12875 = ORIENTED_EDGE('',*,*,#12876,.T.);+#12876 = EDGE_CURVE('',#12854,#12805,#12877,.T.);+#12877 = SURFACE_CURVE('',#12878,(#12882,#12889),.PCURVE_S1.);+#12878 = LINE('',#12879,#12880);+#12879 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,+    9.314404469578E-02));+#12880 = VECTOR('',#12881,1.);+#12881 = DIRECTION('',(0.,-1.,0.));+#12882 = PCURVE('',#1502,#12883);+#12883 = DEFINITIONAL_REPRESENTATION('',(#12884),#12888);+#12884 = LINE('',#12885,#12886);+#12885 = CARTESIAN_POINT('',(1.000088900582E-12,0.));+#12886 = VECTOR('',#12887,1.);+#12887 = DIRECTION('',(1.,0.));+#12888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12889 = PCURVE('',#8586,#12890);+#12890 = DEFINITIONAL_REPRESENTATION('',(#12891),#12895);+#12891 = LINE('',#12892,#12893);+#12892 = CARTESIAN_POINT('',(0.267972657343,0.190302677633));+#12893 = VECTOR('',#12894,1.);+#12894 = DIRECTION('',(0.,-1.));+#12895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12896 = ORIENTED_EDGE('',*,*,#12804,.F.);+#12897 = ADVANCED_FACE('',(#12898),#1474,.F.);+#12898 = FACE_BOUND('',#12899,.F.);+#12899 = EDGE_LOOP('',(#12900,#12901,#12924,#12945));+#12900 = ORIENTED_EDGE('',*,*,#1458,.T.);+#12901 = ORIENTED_EDGE('',*,*,#12902,.F.);+#12902 = EDGE_CURVE('',#12903,#1426,#12905,.T.);+#12903 = VERTEX_POINT('',#12904);+#12904 = CARTESIAN_POINT('',(2.674462039417,4.385692661494,+    9.314404469578E-02));+#12905 = SURFACE_CURVE('',#12906,(#12910,#12917),.PCURVE_S1.);+#12906 = LINE('',#12907,#12908);+#12907 = CARTESIAN_POINT('',(2.674462039417,4.385692661494,+    9.314404469578E-02));+#12908 = VECTOR('',#12909,1.);+#12909 = DIRECTION('',(-2.383884076006E-14,0.,-1.));+#12910 = PCURVE('',#1474,#12911);+#12911 = DEFINITIONAL_REPRESENTATION('',(#12912),#12916);+#12912 = LINE('',#12913,#12914);+#12913 = CARTESIAN_POINT('',(0.674999993392,0.));+#12914 = VECTOR('',#12915,1.);+#12915 = DIRECTION('',(2.383884076006E-14,-1.));+#12916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12917 = PCURVE('',#1446,#12918);+#12918 = DEFINITIONAL_REPRESENTATION('',(#12919),#12923);+#12919 = LINE('',#12920,#12921);+#12920 = CARTESIAN_POINT('',(7.068583470577,0.));+#12921 = VECTOR('',#12922,1.);+#12922 = DIRECTION('',(-2.574594802086E-13,1.));+#12923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12924 = ORIENTED_EDGE('',*,*,#12925,.F.);+#12925 = EDGE_CURVE('',#12854,#12903,#12926,.T.);+#12926 = SURFACE_CURVE('',#12927,(#12931,#12938),.PCURVE_S1.);+#12927 = LINE('',#12928,#12929);+#12928 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,+    9.314404469578E-02));+#12929 = VECTOR('',#12930,1.);+#12930 = DIRECTION('',(-1.,0.,0.));+#12931 = PCURVE('',#1474,#12932);+#12932 = DEFINITIONAL_REPRESENTATION('',(#12933),#12937);+#12933 = LINE('',#12934,#12935);+#12934 = CARTESIAN_POINT('',(4.9999993389E-02,0.));+#12935 = VECTOR('',#12936,1.);+#12936 = DIRECTION('',(1.,0.));+#12937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12938 = PCURVE('',#8586,#12939);+#12939 = DEFINITIONAL_REPRESENTATION('',(#12940),#12944);+#12940 = LINE('',#12941,#12942);+#12941 = CARTESIAN_POINT('',(0.267972657343,0.190302677633));+#12942 = VECTOR('',#12943,1.);+#12943 = DIRECTION('',(-1.,0.));+#12944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12945 = ORIENTED_EDGE('',*,*,#12853,.F.);+#12946 = ADVANCED_FACE('',(#12947),#1446,.F.);+#12947 = FACE_BOUND('',#12948,.F.);+#12948 = EDGE_LOOP('',(#12949,#12950,#12973,#12999));+#12949 = ORIENTED_EDGE('',*,*,#1425,.F.);+#12950 = ORIENTED_EDGE('',*,*,#12951,.T.);+#12951 = EDGE_CURVE('',#1398,#12952,#12954,.T.);+#12952 = VERTEX_POINT('',#12953);+#12953 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,+    9.314404469578E-02));+#12954 = SURFACE_CURVE('',#12955,(#12959,#12966),.PCURVE_S1.);+#12955 = LINE('',#12956,#12957);+#12956 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,0.));+#12957 = VECTOR('',#12958,1.);+#12958 = DIRECTION('',(0.,0.,1.));+#12959 = PCURVE('',#1446,#12960);+#12960 = DEFINITIONAL_REPRESENTATION('',(#12961),#12965);+#12961 = LINE('',#12962,#12963);+#12962 = CARTESIAN_POINT('',(5.497787143782,9.314404469578E-02));+#12963 = VECTOR('',#12964,1.);+#12964 = DIRECTION('',(0.,-1.));+#12965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12966 = PCURVE('',#1413,#12967);+#12967 = DEFINITIONAL_REPRESENTATION('',(#12968),#12972);+#12968 = LINE('',#12969,#12970);+#12969 = CARTESIAN_POINT('',(0.200000000002,-9.314404469578E-02));+#12970 = VECTOR('',#12971,1.);+#12971 = DIRECTION('',(0.,1.));+#12972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12973 = ORIENTED_EDGE('',*,*,#12974,.T.);+#12974 = EDGE_CURVE('',#12952,#12903,#12975,.T.);+#12975 = SURFACE_CURVE('',#12976,(#12981,#12988),.PCURVE_S1.);+#12976 = CIRCLE('',#12977,0.1);+#12977 = AXIS2_PLACEMENT_3D('',#12978,#12979,#12980);+#12978 = CARTESIAN_POINT('',(2.674462039417,4.285692661494,+    9.314404469578E-02));+#12979 = DIRECTION('',(0.,0.,-1.));+#12980 = DIRECTION('',(-1.,0.,0.));+#12981 = PCURVE('',#1446,#12982);+#12982 = DEFINITIONAL_REPRESENTATION('',(#12983),#12987);+#12983 = LINE('',#12984,#12985);+#12984 = CARTESIAN_POINT('',(5.497787143782,0.));+#12985 = VECTOR('',#12986,1.);+#12986 = DIRECTION('',(1.,0.));+#12987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12988 = PCURVE('',#8586,#12989);+#12989 = DEFINITIONAL_REPRESENTATION('',(#12990),#12998);+#12990 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12991,#12992,#12993,#12994+    ,#12995,#12996,#12997),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#12991 = CARTESIAN_POINT('',(-0.45702734266,9.0302677633E-02));+#12992 = CARTESIAN_POINT('',(-0.45702734266,0.26350775839));+#12993 = CARTESIAN_POINT('',(-0.30702734266,0.176905218011));+#12994 = CARTESIAN_POINT('',(-0.15702734266,9.0302677633E-02));+#12995 = CARTESIAN_POINT('',(-0.30702734266,3.700137254556E-03));+#12996 = CARTESIAN_POINT('',(-0.45702734266,-8.290240312389E-02));+#12997 = CARTESIAN_POINT('',(-0.45702734266,9.0302677633E-02));+#12998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#12999 = ORIENTED_EDGE('',*,*,#12902,.T.);+#13000 = ADVANCED_FACE('',(#13001),#1413,.F.);+#13001 = FACE_BOUND('',#13002,.F.);+#13002 = EDGE_LOOP('',(#13003,#13004,#13027,#13048));+#13003 = ORIENTED_EDGE('',*,*,#1397,.T.);+#13004 = ORIENTED_EDGE('',*,*,#13005,.F.);+#13005 = EDGE_CURVE('',#13006,#1365,#13008,.T.);+#13006 = VERTEX_POINT('',#13007);+#13007 = CARTESIAN_POINT('',(2.574462039417,4.110692661494,+    9.314404469578E-02));+#13008 = SURFACE_CURVE('',#13009,(#13013,#13020),.PCURVE_S1.);+#13009 = LINE('',#13010,#13011);+#13010 = CARTESIAN_POINT('',(2.574462039417,4.110692661494,+    9.314404469578E-02));+#13011 = VECTOR('',#13012,1.);+#13012 = DIRECTION('',(0.,1.696371908486E-11,-1.));+#13013 = PCURVE('',#1413,#13014);+#13014 = DEFINITIONAL_REPRESENTATION('',(#13015),#13019);+#13015 = LINE('',#13016,#13017);+#13016 = CARTESIAN_POINT('',(0.375000000002,0.));+#13017 = VECTOR('',#13018,1.);+#13018 = DIRECTION('',(-1.696371908486E-11,-1.));+#13019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13020 = PCURVE('',#1385,#13021);+#13021 = DEFINITIONAL_REPRESENTATION('',(#13022),#13026);+#13022 = LINE('',#13023,#13024);+#13023 = CARTESIAN_POINT('',(1.570796326765,0.));+#13024 = VECTOR('',#13025,1.);+#13025 = DIRECTION('',(1.696371908486E-10,1.));+#13026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13027 = ORIENTED_EDGE('',*,*,#13028,.F.);+#13028 = EDGE_CURVE('',#12952,#13006,#13029,.T.);+#13029 = SURFACE_CURVE('',#13030,(#13034,#13041),.PCURVE_S1.);+#13030 = LINE('',#13031,#13032);+#13031 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,+    9.314404469578E-02));+#13032 = VECTOR('',#13033,1.);+#13033 = DIRECTION('',(-1.304353450645E-12,-1.,0.));+#13034 = PCURVE('',#1413,#13035);+#13035 = DEFINITIONAL_REPRESENTATION('',(#13036),#13040);+#13036 = LINE('',#13037,#13038);+#13037 = CARTESIAN_POINT('',(0.200000000002,0.));+#13038 = VECTOR('',#13039,1.);+#13039 = DIRECTION('',(1.,0.));+#13040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13041 = PCURVE('',#8586,#13042);+#13042 = DEFINITIONAL_REPRESENTATION('',(#13043),#13047);+#13043 = LINE('',#13044,#13045);+#13044 = CARTESIAN_POINT('',(-0.45702734266,9.0302677633E-02));+#13045 = VECTOR('',#13046,1.);+#13046 = DIRECTION('',(-1.304353450645E-12,-1.));+#13047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13048 = ORIENTED_EDGE('',*,*,#12951,.F.);+#13049 = ADVANCED_FACE('',(#13050),#1385,.F.);+#13050 = FACE_BOUND('',#13051,.F.);+#13051 = EDGE_LOOP('',(#13052,#13053,#13076,#13102));+#13052 = ORIENTED_EDGE('',*,*,#1364,.F.);+#13053 = ORIENTED_EDGE('',*,*,#13054,.T.);+#13054 = EDGE_CURVE('',#1337,#13055,#13057,.T.);+#13055 = VERTEX_POINT('',#13056);+#13056 = CARTESIAN_POINT('',(2.674462039368,4.010692661494,+    9.314404469578E-02));+#13057 = SURFACE_CURVE('',#13058,(#13062,#13069),.PCURVE_S1.);+#13058 = LINE('',#13059,#13060);+#13059 = CARTESIAN_POINT('',(2.674462039407,4.010692661498,0.));+#13060 = VECTOR('',#13061,1.);+#13061 = DIRECTION('',(-4.653818493178E-11,0.,1.));+#13062 = PCURVE('',#1385,#13063);+#13063 = DEFINITIONAL_REPRESENTATION('',(#13064),#13068);+#13064 = LINE('',#13065,#13066);+#13065 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#13066 = VECTOR('',#13067,1.);+#13067 = DIRECTION('',(0.,-1.));+#13068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13069 = PCURVE('',#1352,#13070);+#13070 = DEFINITIONAL_REPRESENTATION('',(#13071),#13075);+#13071 = LINE('',#13072,#13073);+#13072 = CARTESIAN_POINT('',(-0.674999993402,-9.314404469578E-02));+#13073 = VECTOR('',#13074,1.);+#13074 = DIRECTION('',(-4.653818493178E-11,1.));+#13075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13076 = ORIENTED_EDGE('',*,*,#13077,.T.);+#13077 = EDGE_CURVE('',#13055,#13006,#13078,.T.);+#13078 = SURFACE_CURVE('',#13079,(#13084,#13091),.PCURVE_S1.);+#13079 = CIRCLE('',#13080,0.100000000003);+#13080 = AXIS2_PLACEMENT_3D('',#13081,#13082,#13083);+#13081 = CARTESIAN_POINT('',(2.67446203942,4.110692661497,+    9.314404469578E-02));+#13082 = DIRECTION('',(0.,0.,-1.));+#13083 = DIRECTION('',(-5.162714700043E-10,-1.,-0.));+#13084 = PCURVE('',#1385,#13085);+#13085 = DEFINITIONAL_REPRESENTATION('',(#13086),#13090);+#13086 = LINE('',#13087,#13088);+#13087 = CARTESIAN_POINT('',(0.,0.));+#13088 = VECTOR('',#13089,1.);+#13089 = DIRECTION('',(1.,0.));+#13090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13091 = PCURVE('',#8586,#13092);+#13092 = DEFINITIONAL_REPRESENTATION('',(#13093),#13101);+#13093 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13094,#13095,#13096,#13097+    ,#13098,#13099,#13100),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#13094 = CARTESIAN_POINT('',(-0.357027342709,-0.184697322367));+#13095 = CARTESIAN_POINT('',(-0.530232423471,-0.184697322278));+#13096 = CARTESIAN_POINT('',(-0.443629883012,-3.469732231779E-02));+#13097 = CARTESIAN_POINT('',(-0.357027342554,0.115302677642));+#13098 = CARTESIAN_POINT('',(-0.27042480225,-3.469732240721E-02));+#13099 = CARTESIAN_POINT('',(-0.183822261947,-0.184697322456));+#13100 = CARTESIAN_POINT('',(-0.357027342709,-0.184697322367));+#13101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13102 = ORIENTED_EDGE('',*,*,#13005,.T.);+#13103 = ADVANCED_FACE('',(#13104),#1352,.F.);+#13104 = FACE_BOUND('',#13105,.F.);+#13105 = EDGE_LOOP('',(#13106,#13107,#13130,#13151));+#13106 = ORIENTED_EDGE('',*,*,#1336,.T.);+#13107 = ORIENTED_EDGE('',*,*,#13108,.T.);+#13108 = EDGE_CURVE('',#1309,#13109,#13111,.T.);+#13109 = VERTEX_POINT('',#13110);+#13110 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,+    9.314404469578E-02));+#13111 = SURFACE_CURVE('',#13112,(#13116,#13123),.PCURVE_S1.);+#13112 = LINE('',#13113,#13114);+#13113 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,0.));+#13114 = VECTOR('',#13115,1.);+#13115 = DIRECTION('',(0.,0.,1.));+#13116 = PCURVE('',#1352,#13117);+#13117 = DEFINITIONAL_REPRESENTATION('',(#13118),#13122);+#13118 = LINE('',#13119,#13120);+#13119 = CARTESIAN_POINT('',(7.4999999997E-02,-9.314404469578E-02));+#13120 = VECTOR('',#13121,1.);+#13121 = DIRECTION('',(0.,1.));+#13122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13123 = PCURVE('',#1324,#13124);+#13124 = DEFINITIONAL_REPRESENTATION('',(#13125),#13129);+#13125 = LINE('',#13126,#13127);+#13126 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#13127 = VECTOR('',#13128,1.);+#13128 = DIRECTION('',(0.,1.));+#13129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13130 = ORIENTED_EDGE('',*,*,#13131,.F.);+#13131 = EDGE_CURVE('',#13055,#13109,#13132,.T.);+#13132 = SURFACE_CURVE('',#13133,(#13137,#13144),.PCURVE_S1.);+#13133 = LINE('',#13134,#13135);+#13134 = CARTESIAN_POINT('',(2.674462039402,4.010692661498,+    9.314404469578E-02));+#13135 = VECTOR('',#13136,1.);+#13136 = DIRECTION('',(1.,2.257157443784E-12,0.));+#13137 = PCURVE('',#1352,#13138);+#13138 = DEFINITIONAL_REPRESENTATION('',(#13139),#13143);+#13139 = LINE('',#13140,#13141);+#13140 = CARTESIAN_POINT('',(-0.674999993407,0.));+#13141 = VECTOR('',#13142,1.);+#13142 = DIRECTION('',(1.,0.));+#13143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13144 = PCURVE('',#8586,#13145);+#13145 = DEFINITIONAL_REPRESENTATION('',(#13146),#13150);+#13146 = LINE('',#13147,#13148);+#13147 = CARTESIAN_POINT('',(-0.357027342675,-0.184697322363));+#13148 = VECTOR('',#13149,1.);+#13149 = DIRECTION('',(1.,2.257157443784E-12));+#13150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13151 = ORIENTED_EDGE('',*,*,#13054,.F.);+#13152 = ADVANCED_FACE('',(#13153),#1324,.F.);+#13153 = FACE_BOUND('',#13154,.F.);+#13154 = EDGE_LOOP('',(#13155,#13156,#13177,#13178));+#13155 = ORIENTED_EDGE('',*,*,#8705,.T.);+#13156 = ORIENTED_EDGE('',*,*,#13157,.T.);+#13157 = EDGE_CURVE('',#8683,#13109,#13158,.T.);+#13158 = SURFACE_CURVE('',#13159,(#13163,#13170),.PCURVE_S1.);+#13159 = LINE('',#13160,#13161);+#13160 = CARTESIAN_POINT('',(3.5,4.045943712856,9.314404469578E-02));+#13161 = VECTOR('',#13162,1.);+#13162 = DIRECTION('',(-0.906183139998,-0.422885465325,0.));+#13163 = PCURVE('',#1324,#13164);+#13164 = DEFINITIONAL_REPRESENTATION('',(#13165),#13169);+#13165 = LINE('',#13166,#13167);+#13166 = CARTESIAN_POINT('',(8.335838955724E-02,0.));+#13167 = VECTOR('',#13168,1.);+#13168 = DIRECTION('',(-1.,0.));+#13169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13170 = PCURVE('',#8586,#13171);+#13171 = DEFINITIONAL_REPRESENTATION('',(#13172),#13176);+#13172 = LINE('',#13173,#13174);+#13173 = CARTESIAN_POINT('',(0.468510617923,-0.149446271005));+#13174 = VECTOR('',#13175,1.);+#13175 = DIRECTION('',(-0.906183139998,-0.422885465325));+#13176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13177 = ORIENTED_EDGE('',*,*,#13108,.F.);+#13178 = ORIENTED_EDGE('',*,*,#1308,.T.);+#13179 = ADVANCED_FACE('',(#13180),#8586,.F.);+#13180 = FACE_BOUND('',#13181,.F.);+#13181 = EDGE_LOOP('',(#13182,#13183,#13206,#13234,#13255,#13256,#13257,+    #13258,#13259,#13260,#13261,#13262,#13263,#13264));+#13182 = ORIENTED_EDGE('',*,*,#8682,.T.);+#13183 = ORIENTED_EDGE('',*,*,#13184,.T.);+#13184 = EDGE_CURVE('',#8655,#13185,#13187,.T.);+#13185 = VERTEX_POINT('',#13186);+#13186 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+    9.314404469578E-02));+#13187 = SURFACE_CURVE('',#13188,(#13192,#13199),.PCURVE_S1.);+#13188 = LINE('',#13189,#13190);+#13189 = CARTESIAN_POINT('',(3.5,4.095983918047,9.314404469578E-02));+#13190 = VECTOR('',#13191,1.);+#13191 = DIRECTION('',(-1.,0.,0.));+#13192 = PCURVE('',#8586,#13193);+#13193 = DEFINITIONAL_REPRESENTATION('',(#13194),#13198);+#13194 = LINE('',#13195,#13196);+#13195 = CARTESIAN_POINT('',(0.468510617923,-9.9406065814E-02));+#13196 = VECTOR('',#13197,1.);+#13197 = DIRECTION('',(-1.,0.));+#13198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13199 = PCURVE('',#8670,#13200);+#13200 = DEFINITIONAL_REPRESENTATION('',(#13201),#13205);+#13201 = LINE('',#13202,#13203);+#13202 = CARTESIAN_POINT('',(6.0741328315E-02,0.1));+#13203 = VECTOR('',#13204,1.);+#13204 = DIRECTION('',(-1.,0.));+#13205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13206 = ORIENTED_EDGE('',*,*,#13207,.T.);+#13207 = EDGE_CURVE('',#13185,#13208,#13210,.T.);+#13208 = VERTEX_POINT('',#13209);+#13209 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+    9.314404469578E-02));+#13210 = SURFACE_CURVE('',#13211,(#13215,#13222),.PCURVE_S1.);+#13211 = LINE('',#13212,#13213);+#13212 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+    9.314404469578E-02));+#13213 = VECTOR('',#13214,1.);+#13214 = DIRECTION('',(0.,1.,0.));+#13215 = PCURVE('',#8586,#13216);+#13216 = DEFINITIONAL_REPRESENTATION('',(#13217),#13221);+#13217 = LINE('',#13218,#13219);+#13218 = CARTESIAN_POINT('',(0.415294252949,-9.9406065814E-02));+#13219 = VECTOR('',#13220,1.);+#13220 = DIRECTION('',(0.,1.));+#13221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13222 = PCURVE('',#13223,#13228);+#13223 = PLANE('',#13224);+#13224 = AXIS2_PLACEMENT_3D('',#13225,#13226,#13227);+#13225 = CARTESIAN_POINT('',(3.446783635026,3.503781429475,+    0.193144044696));+#13226 = DIRECTION('',(1.,0.,0.));+#13227 = DIRECTION('',(-0.,1.,0.));+#13228 = DEFINITIONAL_REPRESENTATION('',(#13229),#13233);+#13229 = LINE('',#13230,#13231);+#13230 = CARTESIAN_POINT('',(0.592202488572,-0.1));+#13231 = VECTOR('',#13232,1.);+#13232 = DIRECTION('',(1.,0.));+#13233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13234 = ORIENTED_EDGE('',*,*,#13235,.T.);+#13235 = EDGE_CURVE('',#13208,#8571,#13236,.T.);+#13236 = SURFACE_CURVE('',#13237,(#13241,#13248),.PCURVE_S1.);+#13237 = LINE('',#13238,#13239);+#13238 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+    9.314404469578E-02));+#13239 = VECTOR('',#13240,1.);+#13240 = DIRECTION('',(1.,-1.668994904344E-14,0.));+#13241 = PCURVE('',#8586,#13242);+#13242 = DEFINITIONAL_REPRESENTATION('',(#13243),#13247);+#13243 = LINE('',#13244,#13245);+#13244 = CARTESIAN_POINT('',(0.415294252949,-1.9406065816E-02));+#13245 = VECTOR('',#13246,1.);+#13246 = DIRECTION('',(1.,-1.668994904344E-14));+#13247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13248 = PCURVE('',#8614,#13249);+#13249 = DEFINITIONAL_REPRESENTATION('',(#13250),#13254);+#13250 = LINE('',#13251,#13252);+#13251 = CARTESIAN_POINT('',(0.127475036669,0.1));+#13252 = VECTOR('',#13253,1.);+#13253 = DIRECTION('',(-1.,-0.));+#13254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13255 = ORIENTED_EDGE('',*,*,#8570,.T.);+#13256 = ORIENTED_EDGE('',*,*,#12779,.F.);+#13257 = ORIENTED_EDGE('',*,*,#12827,.T.);+#13258 = ORIENTED_EDGE('',*,*,#12876,.F.);+#13259 = ORIENTED_EDGE('',*,*,#12925,.T.);+#13260 = ORIENTED_EDGE('',*,*,#12974,.F.);+#13261 = ORIENTED_EDGE('',*,*,#13028,.T.);+#13262 = ORIENTED_EDGE('',*,*,#13077,.F.);+#13263 = ORIENTED_EDGE('',*,*,#13131,.T.);+#13264 = ORIENTED_EDGE('',*,*,#13157,.F.);+#13265 = ADVANCED_FACE('',(#13266),#8670,.T.);+#13266 = FACE_BOUND('',#13267,.F.);+#13267 = EDGE_LOOP('',(#13268,#13269,#13292,#13313));+#13268 = ORIENTED_EDGE('',*,*,#8654,.F.);+#13269 = ORIENTED_EDGE('',*,*,#13270,.F.);+#13270 = EDGE_CURVE('',#13271,#8627,#13273,.T.);+#13271 = VERTEX_POINT('',#13272);+#13272 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+    0.193144044696));+#13273 = SURFACE_CURVE('',#13274,(#13278,#13285),.PCURVE_S1.);+#13274 = LINE('',#13275,#13276);+#13275 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+    0.193144044696));+#13276 = VECTOR('',#13277,1.);+#13277 = DIRECTION('',(1.,0.,0.));+#13278 = PCURVE('',#8670,#13279);+#13279 = DEFINITIONAL_REPRESENTATION('',(#13280),#13284);+#13280 = LINE('',#13281,#13282);+#13281 = CARTESIAN_POINT('',(7.524963341E-03,0.));+#13282 = VECTOR('',#13283,1.);+#13283 = DIRECTION('',(1.,0.));+#13284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13285 = PCURVE('',#8642,#13286);+#13286 = DEFINITIONAL_REPRESENTATION('',(#13287),#13291);+#13287 = LINE('',#13288,#13289);+#13288 = CARTESIAN_POINT('',(0.638353233598,8.6639084279E-02));+#13289 = VECTOR('',#13290,1.);+#13290 = DIRECTION('',(1.,0.));+#13291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13292 = ORIENTED_EDGE('',*,*,#13293,.T.);+#13293 = EDGE_CURVE('',#13271,#13185,#13294,.T.);+#13294 = SURFACE_CURVE('',#13295,(#13299,#13306),.PCURVE_S1.);+#13295 = LINE('',#13296,#13297);+#13296 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+    0.193144044696));+#13297 = VECTOR('',#13298,1.);+#13298 = DIRECTION('',(0.,0.,-1.));+#13299 = PCURVE('',#8670,#13300);+#13300 = DEFINITIONAL_REPRESENTATION('',(#13301),#13305);+#13301 = LINE('',#13302,#13303);+#13302 = CARTESIAN_POINT('',(7.524963341E-03,0.));+#13303 = VECTOR('',#13304,1.);+#13304 = DIRECTION('',(0.,1.));+#13305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13306 = PCURVE('',#13223,#13307);+#13307 = DEFINITIONAL_REPRESENTATION('',(#13308),#13312);+#13308 = LINE('',#13309,#13310);+#13309 = CARTESIAN_POINT('',(0.592202488572,0.));+#13310 = VECTOR('',#13311,1.);+#13311 = DIRECTION('',(0.,-1.));+#13312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13313 = ORIENTED_EDGE('',*,*,#13184,.F.);+#13314 = ADVANCED_FACE('',(#13315),#8642,.F.);+#13315 = FACE_BOUND('',#13316,.F.);+#13316 = EDGE_LOOP('',(#13317,#13318,#13341,#13362));+#13317 = ORIENTED_EDGE('',*,*,#8626,.T.);+#13318 = ORIENTED_EDGE('',*,*,#13319,.F.);+#13319 = EDGE_CURVE('',#13320,#8599,#13322,.T.);+#13320 = VERTEX_POINT('',#13321);+#13321 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+    0.193144044696));+#13322 = SURFACE_CURVE('',#13323,(#13327,#13334),.PCURVE_S1.);+#13323 = LINE('',#13324,#13325);+#13324 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+    0.193144044696));+#13325 = VECTOR('',#13326,1.);+#13326 = DIRECTION('',(1.,0.,0.));+#13327 = PCURVE('',#8642,#13328);+#13328 = DEFINITIONAL_REPRESENTATION('',(#13329),#13333);+#13329 = LINE('',#13330,#13331);+#13330 = CARTESIAN_POINT('',(0.638353233598,0.166639084277));+#13331 = VECTOR('',#13332,1.);+#13332 = DIRECTION('',(1.,0.));+#13333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13334 = PCURVE('',#8614,#13335);+#13335 = DEFINITIONAL_REPRESENTATION('',(#13336),#13340);+#13336 = LINE('',#13337,#13338);+#13337 = CARTESIAN_POINT('',(0.127475036669,0.));+#13338 = VECTOR('',#13339,1.);+#13339 = DIRECTION('',(-1.,-0.));+#13340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13341 = ORIENTED_EDGE('',*,*,#13342,.F.);+#13342 = EDGE_CURVE('',#13271,#13320,#13343,.T.);+#13343 = SURFACE_CURVE('',#13344,(#13348,#13355),.PCURVE_S1.);+#13344 = LINE('',#13345,#13346);+#13345 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+    0.193144044696));+#13346 = VECTOR('',#13347,1.);+#13347 = DIRECTION('',(0.,1.,0.));+#13348 = PCURVE('',#8642,#13349);+#13349 = DEFINITIONAL_REPRESENTATION('',(#13350),#13354);+#13350 = LINE('',#13351,#13352);+#13351 = CARTESIAN_POINT('',(0.638353233598,8.6639084279E-02));+#13352 = VECTOR('',#13353,1.);+#13353 = DIRECTION('',(0.,1.));+#13354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13355 = PCURVE('',#13223,#13356);+#13356 = DEFINITIONAL_REPRESENTATION('',(#13357),#13361);+#13357 = LINE('',#13358,#13359);+#13358 = CARTESIAN_POINT('',(0.592202488572,0.));+#13359 = VECTOR('',#13360,1.);+#13360 = DIRECTION('',(1.,0.));+#13361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13362 = ORIENTED_EDGE('',*,*,#13270,.T.);+#13363 = ADVANCED_FACE('',(#13364),#8614,.T.);+#13364 = FACE_BOUND('',#13365,.F.);+#13365 = EDGE_LOOP('',(#13366,#13367,#13368,#13389));+#13366 = ORIENTED_EDGE('',*,*,#8598,.T.);+#13367 = ORIENTED_EDGE('',*,*,#13235,.F.);+#13368 = ORIENTED_EDGE('',*,*,#13369,.F.);+#13369 = EDGE_CURVE('',#13320,#13208,#13370,.T.);+#13370 = SURFACE_CURVE('',#13371,(#13375,#13382),.PCURVE_S1.);+#13371 = LINE('',#13372,#13373);+#13372 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+    0.193144044696));+#13373 = VECTOR('',#13374,1.);+#13374 = DIRECTION('',(0.,0.,-1.));+#13375 = PCURVE('',#8614,#13376);+#13376 = DEFINITIONAL_REPRESENTATION('',(#13377),#13381);+#13377 = LINE('',#13378,#13379);+#13378 = CARTESIAN_POINT('',(0.127475036669,0.));+#13379 = VECTOR('',#13380,1.);+#13380 = DIRECTION('',(0.,1.));+#13381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13382 = PCURVE('',#13223,#13383);+#13383 = DEFINITIONAL_REPRESENTATION('',(#13384),#13388);+#13384 = LINE('',#13385,#13386);+#13385 = CARTESIAN_POINT('',(0.67220248857,0.));+#13386 = VECTOR('',#13387,1.);+#13387 = DIRECTION('',(0.,-1.));+#13388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13389 = ORIENTED_EDGE('',*,*,#13319,.T.);+#13390 = ADVANCED_FACE('',(#13391),#13223,.T.);+#13391 = FACE_BOUND('',#13392,.F.);+#13392 = EDGE_LOOP('',(#13393,#13394,#13395,#13396));+#13393 = ORIENTED_EDGE('',*,*,#13369,.T.);+#13394 = ORIENTED_EDGE('',*,*,#13207,.F.);+#13395 = ORIENTED_EDGE('',*,*,#13293,.F.);+#13396 = ORIENTED_EDGE('',*,*,#13342,.T.);+#13397 = ADVANCED_FACE('',(#13398),#1273,.F.);+#13398 = FACE_BOUND('',#13399,.F.);+#13399 = EDGE_LOOP('',(#13400,#13401,#13402,#13425));+#13400 = ORIENTED_EDGE('',*,*,#8727,.F.);+#13401 = ORIENTED_EDGE('',*,*,#1257,.T.);+#13402 = ORIENTED_EDGE('',*,*,#13403,.T.);+#13403 = EDGE_CURVE('',#1230,#13404,#13406,.T.);+#13404 = VERTEX_POINT('',#13405);+#13405 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+    9.314404469578E-02));+#13406 = SURFACE_CURVE('',#13407,(#13411,#13418),.PCURVE_S1.);+#13407 = LINE('',#13408,#13409);+#13408 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,0.));+#13409 = VECTOR('',#13410,1.);+#13410 = DIRECTION('',(0.,0.,1.));+#13411 = PCURVE('',#1273,#13412);+#13412 = DEFINITIONAL_REPRESENTATION('',(#13413),#13417);+#13413 = LINE('',#13414,#13415);+#13414 = CARTESIAN_POINT('',(8.276472678267E-02,-9.314404469578E-02));+#13415 = VECTOR('',#13416,1.);+#13416 = DIRECTION('',(0.,1.));+#13417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13418 = PCURVE('',#1245,#13419);+#13419 = DEFINITIONAL_REPRESENTATION('',(#13420),#13424);+#13420 = LINE('',#13421,#13422);+#13421 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#13422 = VECTOR('',#13423,1.);+#13423 = DIRECTION('',(0.,1.));+#13424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13425 = ORIENTED_EDGE('',*,*,#13426,.T.);+#13426 = EDGE_CURVE('',#13404,#8728,#13427,.T.);+#13427 = SURFACE_CURVE('',#13428,(#13432,#13439),.PCURVE_S1.);+#13428 = LINE('',#13429,#13430);+#13429 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+    9.314404469578E-02));+#13430 = VECTOR('',#13431,1.);+#13431 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#13432 = PCURVE('',#1273,#13433);+#13433 = DEFINITIONAL_REPRESENTATION('',(#13434),#13438);+#13434 = LINE('',#13435,#13436);+#13435 = CARTESIAN_POINT('',(8.276472678267E-02,0.));+#13436 = VECTOR('',#13437,1.);+#13437 = DIRECTION('',(-1.,0.));+#13438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13439 = PCURVE('',#8766,#13440);+#13440 = DEFINITIONAL_REPRESENTATION('',(#13441),#13445);+#13441 = LINE('',#13442,#13443);+#13442 = CARTESIAN_POINT('',(0.343079345819,0.125000000003));+#13443 = VECTOR('',#13444,1.);+#13444 = DIRECTION('',(0.906183139998,-0.422885465325));+#13445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13446 = ADVANCED_FACE('',(#13447),#1245,.F.);+#13447 = FACE_BOUND('',#13448,.F.);+#13448 = EDGE_LOOP('',(#13449,#13450,#13473,#13494));+#13449 = ORIENTED_EDGE('',*,*,#1229,.T.);+#13450 = ORIENTED_EDGE('',*,*,#13451,.F.);+#13451 = EDGE_CURVE('',#13452,#1197,#13454,.T.);+#13452 = VERTEX_POINT('',#13453);+#13453 = CARTESIAN_POINT('',(2.724462046042,3.510692661495,+    9.314404469578E-02));+#13454 = SURFACE_CURVE('',#13455,(#13459,#13466),.PCURVE_S1.);+#13455 = LINE('',#13456,#13457);+#13456 = CARTESIAN_POINT('',(2.724462046024,3.510692661497,+    9.314404469578E-02));+#13457 = VECTOR('',#13458,1.);+#13458 = DIRECTION('',(-2.500217618915E-11,0.,-1.));+#13459 = PCURVE('',#1245,#13460);+#13460 = DEFINITIONAL_REPRESENTATION('',(#13461),#13465);+#13461 = LINE('',#13462,#13463);+#13462 = CARTESIAN_POINT('',(0.699999993403,0.));+#13463 = VECTOR('',#13464,1.);+#13464 = DIRECTION('',(2.500217618915E-11,-1.));+#13465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13466 = PCURVE('',#1217,#13467);+#13467 = DEFINITIONAL_REPRESENTATION('',(#13468),#13472);+#13468 = LINE('',#13469,#13470);+#13469 = CARTESIAN_POINT('',(3.141592653662,4.500347673624E-22));+#13470 = VECTOR('',#13471,1.);+#13471 = DIRECTION('',(-2.000174095132E-10,1.));+#13472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13473 = ORIENTED_EDGE('',*,*,#13474,.F.);+#13474 = EDGE_CURVE('',#13404,#13452,#13475,.T.);+#13475 = SURFACE_CURVE('',#13476,(#13480,#13487),.PCURVE_S1.);+#13476 = LINE('',#13477,#13478);+#13477 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+    9.314404469578E-02));+#13478 = VECTOR('',#13479,1.);+#13479 = DIRECTION('',(-1.,-1.298643744472E-12,0.));+#13480 = PCURVE('',#1245,#13481);+#13481 = DEFINITIONAL_REPRESENTATION('',(#13482),#13486);+#13482 = LINE('',#13483,#13484);+#13483 = CARTESIAN_POINT('',(0.,0.));+#13484 = VECTOR('',#13485,1.);+#13485 = DIRECTION('',(1.,0.));+#13486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13487 = PCURVE('',#8766,#13488);+#13488 = DEFINITIONAL_REPRESENTATION('',(#13489),#13493);+#13489 = LINE('',#13490,#13491);+#13490 = CARTESIAN_POINT('',(0.343079345819,0.125000000003));+#13491 = VECTOR('',#13492,1.);+#13492 = DIRECTION('',(-1.,-1.298643744472E-12));+#13493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13494 = ORIENTED_EDGE('',*,*,#13403,.F.);+#13495 = ADVANCED_FACE('',(#13496),#1217,.F.);+#13496 = FACE_BOUND('',#13497,.F.);+#13497 = EDGE_LOOP('',(#13498,#13499,#13522,#13548));+#13498 = ORIENTED_EDGE('',*,*,#1196,.F.);+#13499 = ORIENTED_EDGE('',*,*,#13500,.T.);+#13500 = EDGE_CURVE('',#1169,#13501,#13503,.T.);+#13501 = VERTEX_POINT('',#13502);+#13502 = CARTESIAN_POINT('',(2.724462046042,3.260692661495,+    9.314404469578E-02));+#13503 = SURFACE_CURVE('',#13504,(#13508,#13515),.PCURVE_S1.);+#13504 = LINE('',#13505,#13506);+#13505 = CARTESIAN_POINT('',(2.724462046022,3.260692661493,0.));+#13506 = VECTOR('',#13507,1.);+#13507 = DIRECTION('',(2.498310511654E-11,0.,1.));+#13508 = PCURVE('',#1217,#13509);+#13509 = DEFINITIONAL_REPRESENTATION('',(#13510),#13514);+#13510 = LINE('',#13511,#13512);+#13511 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#13512 = VECTOR('',#13513,1.);+#13513 = DIRECTION('',(0.,-1.));+#13514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13515 = PCURVE('',#1184,#13516);+#13516 = DEFINITIONAL_REPRESENTATION('',(#13517),#13521);+#13517 = LINE('',#13518,#13519);+#13518 = CARTESIAN_POINT('',(-0.62499999339,-9.314404469578E-02));+#13519 = VECTOR('',#13520,1.);+#13520 = DIRECTION('',(2.498310511654E-11,1.));+#13521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13522 = ORIENTED_EDGE('',*,*,#13523,.T.);+#13523 = EDGE_CURVE('',#13501,#13452,#13524,.T.);+#13524 = SURFACE_CURVE('',#13525,(#13530,#13537),.PCURVE_S1.);+#13525 = CIRCLE('',#13526,0.125);+#13526 = AXIS2_PLACEMENT_3D('',#13527,#13528,#13529);+#13527 = CARTESIAN_POINT('',(2.724462046015,3.385692661495,+    9.314404469578E-02));+#13528 = DIRECTION('',(0.,0.,-1.));+#13529 = DIRECTION('',(2.217639405444E-10,-1.,0.));+#13530 = PCURVE('',#1217,#13531);+#13531 = DEFINITIONAL_REPRESENTATION('',(#13532),#13536);+#13532 = LINE('',#13533,#13534);+#13533 = CARTESIAN_POINT('',(0.,0.));+#13534 = VECTOR('',#13535,1.);+#13535 = DIRECTION('',(1.,0.));+#13536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13537 = PCURVE('',#8766,#13538);+#13538 = DEFINITIONAL_REPRESENTATION('',(#13539),#13547);+#13539 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13540,#13541,#13542,#13543+    ,#13544,#13545,#13546),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#13540 = CARTESIAN_POINT('',(-0.356920647565,-0.125));+#13541 = CARTESIAN_POINT('',(-0.573426998511,-0.125000000048));+#13542 = CARTESIAN_POINT('',(-0.46517382308,6.249999997599E-02));+#13543 = CARTESIAN_POINT('',(-0.356920647648,0.25));+#13544 = CARTESIAN_POINT('',(-0.248667472134,6.250000002401E-02));+#13545 = CARTESIAN_POINT('',(-0.140414296619,-0.124999999952));+#13546 = CARTESIAN_POINT('',(-0.356920647565,-0.125));+#13547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13548 = ORIENTED_EDGE('',*,*,#13451,.T.);+#13549 = ADVANCED_FACE('',(#13550),#1184,.F.);+#13550 = FACE_BOUND('',#13551,.F.);+#13551 = EDGE_LOOP('',(#13552,#13553,#13576,#13597));+#13552 = ORIENTED_EDGE('',*,*,#1168,.T.);+#13553 = ORIENTED_EDGE('',*,*,#13554,.T.);+#13554 = EDGE_CURVE('',#1141,#13555,#13557,.T.);+#13555 = VERTEX_POINT('',#13556);+#13556 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,+    9.314404469578E-02));+#13557 = SURFACE_CURVE('',#13558,(#13562,#13569),.PCURVE_S1.);+#13558 = LINE('',#13559,#13560);+#13559 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,0.));+#13560 = VECTOR('',#13561,1.);+#13561 = DIRECTION('',(-1.430330445603E-14,0.,1.));+#13562 = PCURVE('',#1184,#13563);+#13563 = DEFINITIONAL_REPRESENTATION('',(#13564),#13568);+#13564 = LINE('',#13565,#13566);+#13565 = CARTESIAN_POINT('',(7.5000000015E-02,-9.314404469578E-02));+#13566 = VECTOR('',#13567,1.);+#13567 = DIRECTION('',(-1.430330445603E-14,1.));+#13568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13569 = PCURVE('',#1156,#13570);+#13570 = DEFINITIONAL_REPRESENTATION('',(#13571),#13575);+#13571 = LINE('',#13572,#13573);+#13572 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#13573 = VECTOR('',#13574,1.);+#13574 = DIRECTION('',(-1.296141334371E-14,1.));+#13575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13576 = ORIENTED_EDGE('',*,*,#13577,.F.);+#13577 = EDGE_CURVE('',#13501,#13555,#13578,.T.);+#13578 = SURFACE_CURVE('',#13579,(#13583,#13590),.PCURVE_S1.);+#13579 = LINE('',#13580,#13581);+#13580 = CARTESIAN_POINT('',(2.724462046024,3.260692661493,+    9.314404469578E-02));+#13581 = VECTOR('',#13582,1.);+#13582 = DIRECTION('',(1.,-1.301815810286E-12,0.));+#13583 = PCURVE('',#1184,#13584);+#13584 = DEFINITIONAL_REPRESENTATION('',(#13585),#13589);+#13585 = LINE('',#13586,#13587);+#13586 = CARTESIAN_POINT('',(-0.624999993388,0.));+#13587 = VECTOR('',#13588,1.);+#13588 = DIRECTION('',(1.,0.));+#13589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13590 = PCURVE('',#8766,#13591);+#13591 = DEFINITIONAL_REPRESENTATION('',(#13592),#13596);+#13592 = LINE('',#13593,#13594);+#13593 = CARTESIAN_POINT('',(-0.356920647584,-0.125000000002));+#13594 = VECTOR('',#13595,1.);+#13595 = DIRECTION('',(1.,-1.301815810286E-12));+#13596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13597 = ORIENTED_EDGE('',*,*,#13500,.F.);+#13598 = ADVANCED_FACE('',(#13599),#1156,.F.);+#13599 = FACE_BOUND('',#13600,.F.);+#13600 = EDGE_LOOP('',(#13601,#13602,#13623,#13624));+#13601 = ORIENTED_EDGE('',*,*,#8885,.T.);+#13602 = ORIENTED_EDGE('',*,*,#13603,.T.);+#13603 = EDGE_CURVE('',#8863,#13555,#13604,.T.);+#13604 = SURFACE_CURVE('',#13605,(#13609,#13616),.PCURVE_S1.);+#13605 = LINE('',#13606,#13607);+#13606 = CARTESIAN_POINT('',(3.5,3.295943709768,9.314404469578E-02));+#13607 = VECTOR('',#13608,1.);+#13608 = DIRECTION('',(-0.906183139956,-0.422885465415,0.));+#13609 = PCURVE('',#1156,#13610);+#13610 = DEFINITIONAL_REPRESENTATION('',(#13611),#13615);+#13611 = LINE('',#13612,#13613);+#13612 = CARTESIAN_POINT('',(8.335838225449E-02,0.));+#13613 = VECTOR('',#13614,1.);+#13614 = DIRECTION('',(-1.,0.));+#13615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13616 = PCURVE('',#8766,#13617);+#13617 = DEFINITIONAL_REPRESENTATION('',(#13618),#13622);+#13618 = LINE('',#13619,#13620);+#13619 = CARTESIAN_POINT('',(0.418617306392,-8.9748951727E-02));+#13620 = VECTOR('',#13621,1.);+#13621 = DIRECTION('',(-0.906183139956,-0.422885465415));+#13622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13623 = ORIENTED_EDGE('',*,*,#13554,.F.);+#13624 = ORIENTED_EDGE('',*,*,#1140,.T.);+#13625 = ADVANCED_FACE('',(#13626),#8766,.F.);+#13626 = FACE_BOUND('',#13627,.F.);+#13627 = EDGE_LOOP('',(#13628,#13629,#13652,#13680,#13701,#13702,#13703,+    #13704,#13705,#13706));+#13628 = ORIENTED_EDGE('',*,*,#8862,.T.);+#13629 = ORIENTED_EDGE('',*,*,#13630,.T.);+#13630 = EDGE_CURVE('',#8835,#13631,#13633,.T.);+#13631 = VERTEX_POINT('',#13632);+#13632 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+    9.314404469578E-02));+#13633 = SURFACE_CURVE('',#13634,(#13638,#13645),.PCURVE_S1.);+#13634 = LINE('',#13635,#13636);+#13635 = CARTESIAN_POINT('',(3.5,3.345983916503,9.314404469578E-02));+#13636 = VECTOR('',#13637,1.);+#13637 = DIRECTION('',(-1.,0.,0.));+#13638 = PCURVE('',#8766,#13639);+#13639 = DEFINITIONAL_REPRESENTATION('',(#13640),#13644);+#13640 = LINE('',#13641,#13642);+#13641 = CARTESIAN_POINT('',(0.418617306392,-3.9708744992E-02));+#13642 = VECTOR('',#13643,1.);+#13643 = DIRECTION('',(-1.,0.));+#13644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13645 = PCURVE('',#8850,#13646);+#13646 = DEFINITIONAL_REPRESENTATION('',(#13647),#13651);+#13647 = LINE('',#13648,#13649);+#13648 = CARTESIAN_POINT('',(6.0741325004E-02,0.1));+#13649 = VECTOR('',#13650,1.);+#13650 = DIRECTION('',(-1.,0.));+#13651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13652 = ORIENTED_EDGE('',*,*,#13653,.T.);+#13653 = EDGE_CURVE('',#13631,#13654,#13656,.T.);+#13654 = VERTEX_POINT('',#13655);+#13655 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+    9.314404469578E-02));+#13656 = SURFACE_CURVE('',#13657,(#13661,#13668),.PCURVE_S1.);+#13657 = LINE('',#13658,#13659);+#13658 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+    9.314404469578E-02));+#13659 = VECTOR('',#13660,1.);+#13660 = DIRECTION('',(0.,1.,0.));+#13661 = PCURVE('',#8766,#13662);+#13662 = DEFINITIONAL_REPRESENTATION('',(#13663),#13667);+#13663 = LINE('',#13664,#13665);+#13664 = CARTESIAN_POINT('',(0.369373429884,-3.9708744992E-02));+#13665 = VECTOR('',#13666,1.);+#13666 = DIRECTION('',(0.,1.));+#13667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13668 = PCURVE('',#13669,#13674);+#13669 = PLANE('',#13670);+#13670 = AXIS2_PLACEMENT_3D('',#13671,#13672,#13673);+#13671 = CARTESIAN_POINT('',(3.450756123492,3.121602300574,+    0.193144044696));+#13672 = DIRECTION('',(1.,0.,0.));+#13673 = DIRECTION('',(-0.,1.,0.));+#13674 = DEFINITIONAL_REPRESENTATION('',(#13675),#13679);+#13675 = LINE('',#13676,#13677);+#13676 = CARTESIAN_POINT('',(0.224381615929,-0.1));+#13677 = VECTOR('',#13678,1.);+#13678 = DIRECTION('',(1.,0.));+#13679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13680 = ORIENTED_EDGE('',*,*,#13681,.T.);+#13681 = EDGE_CURVE('',#13654,#8751,#13682,.T.);+#13682 = SURFACE_CURVE('',#13683,(#13687,#13694),.PCURVE_S1.);+#13683 = LINE('',#13684,#13685);+#13684 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+    9.314404469578E-02));+#13685 = VECTOR('',#13686,1.);+#13686 = DIRECTION('',(1.,0.,0.));+#13687 = PCURVE('',#8766,#13688);+#13688 = DEFINITIONAL_REPRESENTATION('',(#13689),#13693);+#13689 = LINE('',#13690,#13691);+#13690 = CARTESIAN_POINT('',(0.369373429884,4.0291255006E-02));+#13691 = VECTOR('',#13692,1.);+#13692 = DIRECTION('',(1.,0.));+#13693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13694 = PCURVE('',#8794,#13695);+#13695 = DEFINITIONAL_REPRESENTATION('',(#13696),#13700);+#13696 = LINE('',#13697,#13698);+#13697 = CARTESIAN_POINT('',(0.123502551513,0.1));+#13698 = VECTOR('',#13699,1.);+#13699 = DIRECTION('',(-1.,-0.));+#13700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13701 = ORIENTED_EDGE('',*,*,#8750,.T.);+#13702 = ORIENTED_EDGE('',*,*,#13426,.F.);+#13703 = ORIENTED_EDGE('',*,*,#13474,.T.);+#13704 = ORIENTED_EDGE('',*,*,#13523,.F.);+#13705 = ORIENTED_EDGE('',*,*,#13577,.T.);+#13706 = ORIENTED_EDGE('',*,*,#13603,.F.);+#13707 = ADVANCED_FACE('',(#13708),#8850,.T.);+#13708 = FACE_BOUND('',#13709,.F.);+#13709 = EDGE_LOOP('',(#13710,#13711,#13734,#13755));+#13710 = ORIENTED_EDGE('',*,*,#8834,.F.);+#13711 = ORIENTED_EDGE('',*,*,#13712,.F.);+#13712 = EDGE_CURVE('',#13713,#8807,#13715,.T.);+#13713 = VERTEX_POINT('',#13714);+#13714 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+    0.193144044696));+#13715 = SURFACE_CURVE('',#13716,(#13720,#13727),.PCURVE_S1.);+#13716 = LINE('',#13717,#13718);+#13717 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+    0.193144044696));+#13718 = VECTOR('',#13719,1.);+#13719 = DIRECTION('',(1.,0.,0.));+#13720 = PCURVE('',#8850,#13721);+#13721 = DEFINITIONAL_REPRESENTATION('',(#13722),#13726);+#13722 = LINE('',#13723,#13724);+#13723 = CARTESIAN_POINT('',(1.1497448496E-02,0.));+#13724 = VECTOR('',#13725,1.);+#13725 = DIRECTION('',(1.,0.));+#13726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13727 = PCURVE('',#8822,#13728);+#13728 = DEFINITIONAL_REPRESENTATION('',(#13729),#13733);+#13729 = LINE('',#13730,#13731);+#13730 = CARTESIAN_POINT('',(0.60514126091,-7.088933172E-03));+#13731 = VECTOR('',#13732,1.);+#13732 = DIRECTION('',(1.,0.));+#13733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13734 = ORIENTED_EDGE('',*,*,#13735,.T.);+#13735 = EDGE_CURVE('',#13713,#13631,#13736,.T.);+#13736 = SURFACE_CURVE('',#13737,(#13741,#13748),.PCURVE_S1.);+#13737 = LINE('',#13738,#13739);+#13738 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+    0.193144044696));+#13739 = VECTOR('',#13740,1.);+#13740 = DIRECTION('',(0.,0.,-1.));+#13741 = PCURVE('',#8850,#13742);+#13742 = DEFINITIONAL_REPRESENTATION('',(#13743),#13747);+#13743 = LINE('',#13744,#13745);+#13744 = CARTESIAN_POINT('',(1.1497448496E-02,0.));+#13745 = VECTOR('',#13746,1.);+#13746 = DIRECTION('',(0.,1.));+#13747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13748 = PCURVE('',#13669,#13749);+#13749 = DEFINITIONAL_REPRESENTATION('',(#13750),#13754);+#13750 = LINE('',#13751,#13752);+#13751 = CARTESIAN_POINT('',(0.224381615929,0.));+#13752 = VECTOR('',#13753,1.);+#13753 = DIRECTION('',(0.,-1.));+#13754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13755 = ORIENTED_EDGE('',*,*,#13630,.F.);+#13756 = ADVANCED_FACE('',(#13757),#8822,.F.);+#13757 = FACE_BOUND('',#13758,.F.);+#13758 = EDGE_LOOP('',(#13759,#13760,#13783,#13804));+#13759 = ORIENTED_EDGE('',*,*,#8806,.T.);+#13760 = ORIENTED_EDGE('',*,*,#13761,.F.);+#13761 = EDGE_CURVE('',#13762,#8779,#13764,.T.);+#13762 = VERTEX_POINT('',#13763);+#13763 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+    0.193144044696));+#13764 = SURFACE_CURVE('',#13765,(#13769,#13776),.PCURVE_S1.);+#13765 = LINE('',#13766,#13767);+#13766 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+    0.193144044696));+#13767 = VECTOR('',#13768,1.);+#13768 = DIRECTION('',(1.,0.,0.));+#13769 = PCURVE('',#8822,#13770);+#13770 = DEFINITIONAL_REPRESENTATION('',(#13771),#13775);+#13771 = LINE('',#13772,#13773);+#13772 = CARTESIAN_POINT('',(0.60514126091,7.2911066826E-02));+#13773 = VECTOR('',#13774,1.);+#13774 = DIRECTION('',(1.,0.));+#13775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13776 = PCURVE('',#8794,#13777);+#13777 = DEFINITIONAL_REPRESENTATION('',(#13778),#13782);+#13778 = LINE('',#13779,#13780);+#13779 = CARTESIAN_POINT('',(0.123502551513,0.));+#13780 = VECTOR('',#13781,1.);+#13781 = DIRECTION('',(-1.,-0.));+#13782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13783 = ORIENTED_EDGE('',*,*,#13784,.F.);+#13784 = EDGE_CURVE('',#13713,#13762,#13785,.T.);+#13785 = SURFACE_CURVE('',#13786,(#13790,#13797),.PCURVE_S1.);+#13786 = LINE('',#13787,#13788);+#13787 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+    0.193144044696));+#13788 = VECTOR('',#13789,1.);+#13789 = DIRECTION('',(0.,1.,0.));+#13790 = PCURVE('',#8822,#13791);+#13791 = DEFINITIONAL_REPRESENTATION('',(#13792),#13796);+#13792 = LINE('',#13793,#13794);+#13793 = CARTESIAN_POINT('',(0.60514126091,-7.088933172E-03));+#13794 = VECTOR('',#13795,1.);+#13795 = DIRECTION('',(0.,1.));+#13796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13797 = PCURVE('',#13669,#13798);+#13798 = DEFINITIONAL_REPRESENTATION('',(#13799),#13803);+#13799 = LINE('',#13800,#13801);+#13800 = CARTESIAN_POINT('',(0.224381615929,0.));+#13801 = VECTOR('',#13802,1.);+#13802 = DIRECTION('',(1.,0.));+#13803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13804 = ORIENTED_EDGE('',*,*,#13712,.T.);+#13805 = ADVANCED_FACE('',(#13806),#8794,.T.);+#13806 = FACE_BOUND('',#13807,.F.);+#13807 = EDGE_LOOP('',(#13808,#13809,#13810,#13831));+#13808 = ORIENTED_EDGE('',*,*,#8778,.T.);+#13809 = ORIENTED_EDGE('',*,*,#13681,.F.);+#13810 = ORIENTED_EDGE('',*,*,#13811,.F.);+#13811 = EDGE_CURVE('',#13762,#13654,#13812,.T.);+#13812 = SURFACE_CURVE('',#13813,(#13817,#13824),.PCURVE_S1.);+#13813 = LINE('',#13814,#13815);+#13814 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+    0.193144044696));+#13815 = VECTOR('',#13816,1.);+#13816 = DIRECTION('',(0.,0.,-1.));+#13817 = PCURVE('',#8794,#13818);+#13818 = DEFINITIONAL_REPRESENTATION('',(#13819),#13823);+#13819 = LINE('',#13820,#13821);+#13820 = CARTESIAN_POINT('',(0.123502551513,0.));+#13821 = VECTOR('',#13822,1.);+#13822 = DIRECTION('',(0.,1.));+#13823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13824 = PCURVE('',#13669,#13825);+#13825 = DEFINITIONAL_REPRESENTATION('',(#13826),#13830);+#13826 = LINE('',#13827,#13828);+#13827 = CARTESIAN_POINT('',(0.304381615927,0.));+#13828 = VECTOR('',#13829,1.);+#13829 = DIRECTION('',(0.,-1.));+#13830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13831 = ORIENTED_EDGE('',*,*,#13761,.T.);+#13832 = ADVANCED_FACE('',(#13833),#13669,.T.);+#13833 = FACE_BOUND('',#13834,.F.);+#13834 = EDGE_LOOP('',(#13835,#13836,#13837,#13838));+#13835 = ORIENTED_EDGE('',*,*,#13735,.F.);+#13836 = ORIENTED_EDGE('',*,*,#13784,.T.);+#13837 = ORIENTED_EDGE('',*,*,#13811,.T.);+#13838 = ORIENTED_EDGE('',*,*,#13653,.F.);+#13839 = ADVANCED_FACE('',(#13840),#2253,.F.);+#13840 = FACE_BOUND('',#13841,.F.);+#13841 = EDGE_LOOP('',(#13842,#13843,#13844,#13867));+#13842 = ORIENTED_EDGE('',*,*,#6605,.F.);+#13843 = ORIENTED_EDGE('',*,*,#2237,.T.);+#13844 = ORIENTED_EDGE('',*,*,#13845,.T.);+#13845 = EDGE_CURVE('',#2210,#13846,#13848,.T.);+#13846 = VERTEX_POINT('',#13847);+#13847 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+    9.314404469578E-02));+#13848 = SURFACE_CURVE('',#13849,(#13853,#13860),.PCURVE_S1.);+#13849 = LINE('',#13850,#13851);+#13850 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,0.));+#13851 = VECTOR('',#13852,1.);+#13852 = DIRECTION('',(0.,0.,1.));+#13853 = PCURVE('',#2253,#13854);+#13854 = DEFINITIONAL_REPRESENTATION('',(#13855),#13859);+#13855 = LINE('',#13856,#13857);+#13856 = CARTESIAN_POINT('',(6.855955304216E-03,0.));+#13857 = VECTOR('',#13858,1.);+#13858 = DIRECTION('',(1.,0.));+#13859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13860 = PCURVE('',#2225,#13861);+#13861 = DEFINITIONAL_REPRESENTATION('',(#13862),#13866);+#13862 = LINE('',#13863,#13864);+#13863 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#13864 = VECTOR('',#13865,1.);+#13865 = DIRECTION('',(0.,1.));+#13866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13867 = ORIENTED_EDGE('',*,*,#13868,.T.);+#13868 = EDGE_CURVE('',#13846,#6606,#13869,.T.);+#13869 = SURFACE_CURVE('',#13870,(#13874,#13881),.PCURVE_S1.);+#13870 = LINE('',#13871,#13872);+#13871 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+    9.314404469578E-02));+#13872 = VECTOR('',#13873,1.);+#13873 = DIRECTION('',(0.,1.,0.));+#13874 = PCURVE('',#2253,#13875);+#13875 = DEFINITIONAL_REPRESENTATION('',(#13876),#13880);+#13876 = LINE('',#13877,#13878);+#13877 = CARTESIAN_POINT('',(1.E-01,0.));+#13878 = VECTOR('',#13879,1.);+#13879 = DIRECTION('',(0.,1.));+#13880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13881 = PCURVE('',#6644,#13882);+#13882 = DEFINITIONAL_REPRESENTATION('',(#13883),#13887);+#13883 = LINE('',#13884,#13885);+#13884 = CARTESIAN_POINT('',(-9.0000000001E-02,0.270508689473));+#13885 = VECTOR('',#13886,1.);+#13886 = DIRECTION('',(0.,1.));+#13887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13888 = ADVANCED_FACE('',(#13889),#2225,.F.);+#13889 = FACE_BOUND('',#13890,.F.);+#13890 = EDGE_LOOP('',(#13891,#13892,#13915,#13936));+#13891 = ORIENTED_EDGE('',*,*,#2209,.T.);+#13892 = ORIENTED_EDGE('',*,*,#13893,.F.);+#13893 = EDGE_CURVE('',#13894,#2182,#13896,.T.);+#13894 = VERTEX_POINT('',#13895);+#13895 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+    9.314404469578E-02));+#13896 = SURFACE_CURVE('',#13897,(#13901,#13908),.PCURVE_S1.);+#13897 = LINE('',#13898,#13899);+#13898 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+    9.314404469578E-02));+#13899 = VECTOR('',#13900,1.);+#13900 = DIRECTION('',(0.,-1.907107260804E-14,-1.));+#13901 = PCURVE('',#2225,#13902);+#13902 = DEFINITIONAL_REPRESENTATION('',(#13903),#13907);+#13903 = LINE('',#13904,#13905);+#13904 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#13905 = VECTOR('',#13906,1.);+#13906 = DIRECTION('',(1.728188445828E-14,-1.));+#13907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13908 = PCURVE('',#2197,#13909);+#13909 = DEFINITIONAL_REPRESENTATION('',(#13910),#13914);+#13910 = LINE('',#13911,#13912);+#13911 = CARTESIAN_POINT('',(0.,0.));+#13912 = VECTOR('',#13913,1.);+#13913 = DIRECTION('',(1.907107260804E-14,-1.));+#13914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13915 = ORIENTED_EDGE('',*,*,#13916,.T.);+#13916 = EDGE_CURVE('',#13894,#13846,#13917,.T.);+#13917 = SURFACE_CURVE('',#13918,(#13922,#13929),.PCURVE_S1.);+#13918 = LINE('',#13919,#13920);+#13919 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+    9.314404469578E-02));+#13920 = VECTOR('',#13921,1.);+#13921 = DIRECTION('',(0.422885465415,0.906183139956,0.));+#13922 = PCURVE('',#2225,#13923);+#13923 = DEFINITIONAL_REPRESENTATION('',(#13924),#13928);+#13924 = LINE('',#13925,#13926);+#13925 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#13926 = VECTOR('',#13927,1.);+#13927 = DIRECTION('',(-1.,0.));+#13928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13929 = PCURVE('',#6644,#13930);+#13930 = DEFINITIONAL_REPRESENTATION('',(#13931),#13935);+#13931 = LINE('',#13932,#13933);+#13932 = CARTESIAN_POINT('',(-0.125000000008,0.195508689476));+#13933 = VECTOR('',#13934,1.);+#13934 = DIRECTION('',(0.422885465415,0.906183139956));+#13935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13936 = ORIENTED_EDGE('',*,*,#13845,.F.);+#13937 = ADVANCED_FACE('',(#13938),#2197,.F.);+#13938 = FACE_BOUND('',#13939,.F.);+#13939 = EDGE_LOOP('',(#13940,#13941,#13964,#13985));+#13940 = ORIENTED_EDGE('',*,*,#2181,.T.);+#13941 = ORIENTED_EDGE('',*,*,#13942,.F.);+#13942 = EDGE_CURVE('',#13943,#2149,#13945,.T.);+#13943 = VERTEX_POINT('',#13944);+#13944 = CARTESIAN_POINT('',(1.12446203942,4.010692661583,+    9.314404469578E-02));+#13945 = SURFACE_CURVE('',#13946,(#13950,#13957),.PCURVE_S1.);+#13946 = LINE('',#13947,#13948);+#13947 = CARTESIAN_POINT('',(1.124462039416,4.010692661524,+    9.314404469578E-02));+#13948 = VECTOR('',#13949,1.);+#13949 = DIRECTION('',(0.,-1.205101078102E-10,-1.));+#13950 = PCURVE('',#2197,#13951);+#13951 = DEFINITIONAL_REPRESENTATION('',(#13952),#13956);+#13952 = LINE('',#13953,#13954);+#13953 = CARTESIAN_POINT('',(0.399999999975,0.));+#13954 = VECTOR('',#13955,1.);+#13955 = DIRECTION('',(1.205101078102E-10,-1.));+#13956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13957 = PCURVE('',#2169,#13958);+#13958 = DEFINITIONAL_REPRESENTATION('',(#13959),#13963);+#13959 = LINE('',#13960,#13961);+#13960 = CARTESIAN_POINT('',(6.28318530718,7.110086245646E-21));+#13961 = VECTOR('',#13962,1.);+#13962 = DIRECTION('',(0.,1.));+#13963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13964 = ORIENTED_EDGE('',*,*,#13965,.F.);+#13965 = EDGE_CURVE('',#13894,#13943,#13966,.T.);+#13966 = SURFACE_CURVE('',#13967,(#13971,#13978),.PCURVE_S1.);+#13967 = LINE('',#13968,#13969);+#13968 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+    9.314404469578E-02));+#13969 = VECTOR('',#13970,1.);+#13970 = DIRECTION('',(6.060707491806E-12,-1.,0.));+#13971 = PCURVE('',#2197,#13972);+#13972 = DEFINITIONAL_REPRESENTATION('',(#13973),#13977);+#13973 = LINE('',#13974,#13975);+#13974 = CARTESIAN_POINT('',(0.,0.));+#13975 = VECTOR('',#13976,1.);+#13976 = DIRECTION('',(1.,0.));+#13977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13978 = PCURVE('',#6644,#13979);+#13979 = DEFINITIONAL_REPRESENTATION('',(#13980),#13984);+#13980 = LINE('',#13981,#13982);+#13981 = CARTESIAN_POINT('',(-0.125000000008,0.195508689476));+#13982 = VECTOR('',#13983,1.);+#13983 = DIRECTION('',(6.060707491806E-12,-1.));+#13984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#13985 = ORIENTED_EDGE('',*,*,#13893,.T.);+#13986 = ADVANCED_FACE('',(#13987),#2169,.F.);+#13987 = FACE_BOUND('',#13988,.F.);+#13988 = EDGE_LOOP('',(#13989,#13990,#14013,#14039));+#13989 = ORIENTED_EDGE('',*,*,#2148,.F.);+#13990 = ORIENTED_EDGE('',*,*,#13991,.T.);+#13991 = EDGE_CURVE('',#2121,#13992,#13994,.T.);+#13992 = VERTEX_POINT('',#13993);+#13993 = CARTESIAN_POINT('',(1.37446203942,4.010692661362,+    9.314404469578E-02));+#13994 = SURFACE_CURVE('',#13995,(#13999,#14006),.PCURVE_S1.);+#13995 = LINE('',#13996,#13997);+#13996 = CARTESIAN_POINT('',(1.374462039413,4.010692661467,0.));+#13997 = VECTOR('',#13998,1.);+#13998 = DIRECTION('',(0.,-1.807365551064E-10,1.));+#13999 = PCURVE('',#2169,#14000);+#14000 = DEFINITIONAL_REPRESENTATION('',(#14001),#14005);+#14001 = LINE('',#14002,#14003);+#14002 = CARTESIAN_POINT('',(3.141592653801,9.314404469578E-02));+#14003 = VECTOR('',#14004,1.);+#14004 = DIRECTION('',(1.445892440852E-09,-1.));+#14005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14006 = PCURVE('',#2136,#14007);+#14007 = DEFINITIONAL_REPRESENTATION('',(#14008),#14012);+#14008 = LINE('',#14009,#14010);+#14009 = CARTESIAN_POINT('',(-0.325000000035,-9.314404469578E-02));+#14010 = VECTOR('',#14011,1.);+#14011 = DIRECTION('',(-1.807365551064E-10,1.));+#14012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14013 = ORIENTED_EDGE('',*,*,#14014,.T.);+#14014 = EDGE_CURVE('',#13992,#13943,#14015,.T.);+#14015 = SURFACE_CURVE('',#14016,(#14021,#14028),.PCURVE_S1.);+#14016 = CIRCLE('',#14017,0.125);+#14017 = AXIS2_PLACEMENT_3D('',#14018,#14019,#14020);+#14018 = CARTESIAN_POINT('',(1.24946203942,4.010692661494,+    9.314404469578E-02));+#14019 = DIRECTION('',(0.,0.,-1.));+#14020 = DIRECTION('',(1.,-1.057870235854E-09,0.));+#14021 = PCURVE('',#2169,#14022);+#14022 = DEFINITIONAL_REPRESENTATION('',(#14023),#14027);+#14023 = LINE('',#14024,#14025);+#14024 = CARTESIAN_POINT('',(3.141592654643,0.));+#14025 = VECTOR('',#14026,1.);+#14026 = DIRECTION('',(1.,0.));+#14027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14028 = PCURVE('',#6644,#14029);+#14029 = DEFINITIONAL_REPRESENTATION('',(#14030),#14038);+#14030 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14031,#14032,#14033,#14034+    ,#14035,#14036,#14037),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#14031 = CARTESIAN_POINT('',(0.124999999999,-0.204491310661));+#14032 = CARTESIAN_POINT('',(0.12499999977,-0.420997661607));+#14033 = CARTESIAN_POINT('',(-6.250000011552E-02,-0.312744485936));+#14034 = CARTESIAN_POINT('',(-0.250000000001,-0.204491310265));+#14035 = CARTESIAN_POINT('',(-6.249999988648E-02,-9.623813498983E-02));+#14036 = CARTESIAN_POINT('',(0.125000000228,1.201504028488E-02));+#14037 = CARTESIAN_POINT('',(0.124999999999,-0.204491310661));+#14038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14039 = ORIENTED_EDGE('',*,*,#13942,.T.);+#14040 = ADVANCED_FACE('',(#14041),#2136,.F.);+#14041 = FACE_BOUND('',#14042,.F.);+#14042 = EDGE_LOOP('',(#14043,#14044,#14067,#14088));+#14043 = ORIENTED_EDGE('',*,*,#2120,.T.);+#14044 = ORIENTED_EDGE('',*,*,#14045,.T.);+#14045 = EDGE_CURVE('',#2093,#14046,#14048,.T.);+#14046 = VERTEX_POINT('',#14047);+#14047 = CARTESIAN_POINT('',(1.374462039409,4.410692661536,+    9.314404469578E-02));+#14048 = SURFACE_CURVE('',#14049,(#14053,#14060),.PCURVE_S1.);+#14049 = LINE('',#14050,#14051);+#14050 = CARTESIAN_POINT('',(1.374462039409,4.410692661536,0.));+#14051 = VECTOR('',#14052,1.);+#14052 = DIRECTION('',(0.,-1.907107260804E-14,1.));+#14053 = PCURVE('',#2136,#14054);+#14054 = DEFINITIONAL_REPRESENTATION('',(#14055),#14059);+#14055 = LINE('',#14056,#14057);+#14056 = CARTESIAN_POINT('',(7.5000000034E-02,-9.314404469578E-02));+#14057 = VECTOR('',#14058,1.);+#14058 = DIRECTION('',(-1.907107260804E-14,1.));+#14059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14060 = PCURVE('',#2108,#14061);+#14061 = DEFINITIONAL_REPRESENTATION('',(#14062),#14066);+#14062 = LINE('',#14063,#14064);+#14063 = CARTESIAN_POINT('',(8.276472674582E-02,9.314404469578E-02));+#14064 = VECTOR('',#14065,1.);+#14065 = DIRECTION('',(1.72818844584E-14,-1.));+#14066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14067 = ORIENTED_EDGE('',*,*,#14068,.F.);+#14068 = EDGE_CURVE('',#13992,#14046,#14069,.T.);+#14069 = SURFACE_CURVE('',#14070,(#14074,#14081),.PCURVE_S1.);+#14070 = LINE('',#14071,#14072);+#14071 = CARTESIAN_POINT('',(1.374462039413,4.01069266145,+    9.314404469578E-02));+#14072 = VECTOR('',#14073,1.);+#14073 = DIRECTION('',(-9.090506123678E-12,1.,0.));+#14074 = PCURVE('',#2136,#14075);+#14075 = DEFINITIONAL_REPRESENTATION('',(#14076),#14080);+#14076 = LINE('',#14077,#14078);+#14077 = CARTESIAN_POINT('',(-0.325000000052,0.));+#14078 = VECTOR('',#14079,1.);+#14079 = DIRECTION('',(1.,0.));+#14080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14081 = PCURVE('',#6644,#14082);+#14082 = DEFINITIONAL_REPRESENTATION('',(#14083),#14087);+#14083 = LINE('',#14084,#14085);+#14084 = CARTESIAN_POINT('',(0.124999999992,-0.204491310573));+#14085 = VECTOR('',#14086,1.);+#14086 = DIRECTION('',(-9.090506123678E-12,1.));+#14087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14088 = ORIENTED_EDGE('',*,*,#13991,.F.);+#14089 = ADVANCED_FACE('',(#14090),#2108,.F.);+#14090 = FACE_BOUND('',#14091,.F.);+#14091 = EDGE_LOOP('',(#14092,#14093,#14116,#14137));+#14092 = ORIENTED_EDGE('',*,*,#2092,.F.);+#14093 = ORIENTED_EDGE('',*,*,#14094,.F.);+#14094 = EDGE_CURVE('',#14095,#2065,#14097,.T.);+#14095 = VERTEX_POINT('',#14096);+#14096 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+    9.314404469578E-02));+#14097 = SURFACE_CURVE('',#14098,(#14102,#14109),.PCURVE_S1.);+#14098 = LINE('',#14099,#14100);+#14099 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+    9.314404469578E-02));+#14100 = VECTOR('',#14101,1.);+#14101 = DIRECTION('',(0.,0.,-1.));+#14102 = PCURVE('',#2108,#14103);+#14103 = DEFINITIONAL_REPRESENTATION('',(#14104),#14108);+#14104 = LINE('',#14105,#14106);+#14105 = CARTESIAN_POINT('',(0.,0.));+#14106 = VECTOR('',#14107,1.);+#14107 = DIRECTION('',(0.,1.));+#14108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14109 = PCURVE('',#2080,#14110);+#14110 = DEFINITIONAL_REPRESENTATION('',(#14111),#14115);+#14111 = LINE('',#14112,#14113);+#14112 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#14113 = VECTOR('',#14114,1.);+#14114 = DIRECTION('',(1.,0.));+#14115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14116 = ORIENTED_EDGE('',*,*,#14117,.T.);+#14117 = EDGE_CURVE('',#14095,#14046,#14118,.T.);+#14118 = SURFACE_CURVE('',#14119,(#14123,#14130),.PCURVE_S1.);+#14119 = LINE('',#14120,#14121);+#14120 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+    9.314404469578E-02));+#14121 = VECTOR('',#14122,1.);+#14122 = DIRECTION('',(0.422885465402,-0.906183139962,0.));+#14123 = PCURVE('',#2108,#14124);+#14124 = DEFINITIONAL_REPRESENTATION('',(#14125),#14129);+#14125 = LINE('',#14126,#14127);+#14126 = CARTESIAN_POINT('',(0.,0.));+#14127 = VECTOR('',#14128,1.);+#14128 = DIRECTION('',(1.,0.));+#14129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14130 = PCURVE('',#6644,#14131);+#14131 = DEFINITIONAL_REPRESENTATION('',(#14132),#14136);+#14132 = LINE('',#14133,#14134);+#14133 = CARTESIAN_POINT('',(9.E-02,0.270508689474));+#14134 = VECTOR('',#14135,1.);+#14135 = DIRECTION('',(0.422885465402,-0.906183139962));+#14136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14137 = ORIENTED_EDGE('',*,*,#14045,.F.);+#14138 = ADVANCED_FACE('',(#14139),#2080,.F.);+#14139 = FACE_BOUND('',#14140,.F.);+#14140 = EDGE_LOOP('',(#14141,#14142,#14163,#14164));+#14141 = ORIENTED_EDGE('',*,*,#6763,.T.);+#14142 = ORIENTED_EDGE('',*,*,#14143,.F.);+#14143 = EDGE_CURVE('',#14095,#6741,#14144,.T.);+#14144 = SURFACE_CURVE('',#14145,(#14149,#14156),.PCURVE_S1.);+#14145 = LINE('',#14146,#14147);+#14146 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+    9.314404469578E-02));+#14147 = VECTOR('',#14148,1.);+#14148 = DIRECTION('',(0.,1.,0.));+#14149 = PCURVE('',#2080,#14150);+#14150 = DEFINITIONAL_REPRESENTATION('',(#14151),#14155);+#14151 = LINE('',#14152,#14153);+#14152 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#14153 = VECTOR('',#14154,1.);+#14154 = DIRECTION('',(0.,1.));+#14155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14156 = PCURVE('',#6644,#14157);+#14157 = DEFINITIONAL_REPRESENTATION('',(#14158),#14162);+#14158 = LINE('',#14159,#14160);+#14159 = CARTESIAN_POINT('',(9.E-02,0.270508689474));+#14160 = VECTOR('',#14161,1.);+#14161 = DIRECTION('',(0.,1.));+#14162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14163 = ORIENTED_EDGE('',*,*,#14094,.T.);+#14164 = ORIENTED_EDGE('',*,*,#2064,.F.);+#14165 = ADVANCED_FACE('',(#14166),#6644,.F.);+#14166 = FACE_BOUND('',#14167,.F.);+#14167 = EDGE_LOOP('',(#14168,#14169,#14170,#14171,#14172,#14173,#14174,+    #14175,#14176,#14177,#14200,#14228));+#14168 = ORIENTED_EDGE('',*,*,#6628,.F.);+#14169 = ORIENTED_EDGE('',*,*,#13868,.F.);+#14170 = ORIENTED_EDGE('',*,*,#13916,.F.);+#14171 = ORIENTED_EDGE('',*,*,#13965,.T.);+#14172 = ORIENTED_EDGE('',*,*,#14014,.F.);+#14173 = ORIENTED_EDGE('',*,*,#14068,.T.);+#14174 = ORIENTED_EDGE('',*,*,#14117,.F.);+#14175 = ORIENTED_EDGE('',*,*,#14143,.T.);+#14176 = ORIENTED_EDGE('',*,*,#6740,.F.);+#14177 = ORIENTED_EDGE('',*,*,#14178,.F.);+#14178 = EDGE_CURVE('',#14179,#6713,#14181,.T.);+#14179 = VERTEX_POINT('',#14180);+#14180 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+    9.314404469578E-02));+#14181 = SURFACE_CURVE('',#14182,(#14186,#14193),.PCURVE_S1.);+#14182 = LINE('',#14183,#14184);+#14183 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+    9.314404469578E-02));+#14184 = VECTOR('',#14185,1.);+#14185 = DIRECTION('',(0.,1.,0.));+#14186 = PCURVE('',#6644,#14187);+#14187 = DEFINITIONAL_REPRESENTATION('',(#14188),#14192);+#14188 = LINE('',#14189,#14190);+#14189 = CARTESIAN_POINT('',(3.9796638866E-02,0.239145992051));+#14190 = VECTOR('',#14191,1.);+#14191 = DIRECTION('',(0.,1.));+#14192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14193 = PCURVE('',#6728,#14194);+#14194 = DEFINITIONAL_REPRESENTATION('',(#14195),#14199);+#14195 = LINE('',#14196,#14197);+#14196 = CARTESIAN_POINT('',(2.8346052626E-02,0.1));+#14197 = VECTOR('',#14198,1.);+#14198 = DIRECTION('',(1.,0.));+#14199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14200 = ORIENTED_EDGE('',*,*,#14201,.T.);+#14201 = EDGE_CURVE('',#14179,#14202,#14204,.T.);+#14202 = VERTEX_POINT('',#14203);+#14203 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+    9.314404469578E-02));+#14204 = SURFACE_CURVE('',#14205,(#14209,#14216),.PCURVE_S1.);+#14205 = LINE('',#14206,#14207);+#14206 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+    9.314404469578E-02));+#14207 = VECTOR('',#14208,1.);+#14208 = DIRECTION('',(-1.,1.110223024651E-14,0.));+#14209 = PCURVE('',#6644,#14210);+#14210 = DEFINITIONAL_REPRESENTATION('',(#14211),#14215);+#14211 = LINE('',#14212,#14213);+#14212 = CARTESIAN_POINT('',(3.9796638866E-02,0.239145992051));+#14213 = VECTOR('',#14214,1.);+#14214 = DIRECTION('',(-1.,1.110223024651E-14));+#14215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14216 = PCURVE('',#14217,#14222);+#14217 = PLANE('',#14218);+#14218 = AXIS2_PLACEMENT_3D('',#14219,#14220,#14221);+#14219 = CARTESIAN_POINT('',(1.461796731363,4.454329964074,+    0.193144044696));+#14220 = DIRECTION('',(0.,1.,0.));+#14221 = DIRECTION('',(-1.,0.,0.));+#14222 = DEFINITIONAL_REPRESENTATION('',(#14223),#14227);+#14223 = LINE('',#14224,#14225);+#14224 = CARTESIAN_POINT('',(0.172538053076,-0.1));+#14225 = VECTOR('',#14226,1.);+#14226 = DIRECTION('',(1.,0.));+#14227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14228 = ORIENTED_EDGE('',*,*,#14229,.T.);+#14229 = EDGE_CURVE('',#14202,#6629,#14230,.T.);+#14230 = SURFACE_CURVE('',#14231,(#14235,#14242),.PCURVE_S1.);+#14231 = LINE('',#14232,#14233);+#14232 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+    9.314404469578E-02));+#14233 = VECTOR('',#14234,1.);+#14234 = DIRECTION('',(0.,1.,0.));+#14235 = PCURVE('',#6644,#14236);+#14236 = DEFINITIONAL_REPRESENTATION('',(#14237),#14241);+#14237 = LINE('',#14238,#14239);+#14238 = CARTESIAN_POINT('',(-4.0203361132E-02,0.239145992051));+#14239 = VECTOR('',#14240,1.);+#14240 = DIRECTION('',(0.,1.));+#14241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14242 = PCURVE('',#6672,#14243);+#14243 = DEFINITIONAL_REPRESENTATION('',(#14244),#14248);+#14244 = LINE('',#14245,#14246);+#14245 = CARTESIAN_POINT('',(0.106653947374,0.1));+#14246 = VECTOR('',#14247,1.);+#14247 = DIRECTION('',(-1.,0.));+#14248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14249 = ADVANCED_FACE('',(#14250),#6728,.T.);+#14250 = FACE_BOUND('',#14251,.F.);+#14251 = EDGE_LOOP('',(#14252,#14253,#14276,#14297));+#14252 = ORIENTED_EDGE('',*,*,#6712,.F.);+#14253 = ORIENTED_EDGE('',*,*,#14254,.F.);+#14254 = EDGE_CURVE('',#14255,#6685,#14257,.T.);+#14255 = VERTEX_POINT('',#14256);+#14256 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+    0.193144044696));+#14257 = SURFACE_CURVE('',#14258,(#14262,#14269),.PCURVE_S1.);+#14258 = LINE('',#14259,#14260);+#14259 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+    0.193144044696));+#14260 = VECTOR('',#14261,1.);+#14261 = DIRECTION('',(0.,1.,0.));+#14262 = PCURVE('',#6728,#14263);+#14263 = DEFINITIONAL_REPRESENTATION('',(#14264),#14268);+#14264 = LINE('',#14265,#14266);+#14265 = CARTESIAN_POINT('',(2.8346052626E-02,0.));+#14266 = VECTOR('',#14267,1.);+#14267 = DIRECTION('',(1.,0.));+#14268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14269 = PCURVE('',#6700,#14270);+#14270 = DEFINITIONAL_REPRESENTATION('',(#14271),#14275);+#14271 = LINE('',#14272,#14273);+#14272 = CARTESIAN_POINT('',(4.214746782E-02,0.287940178322));+#14273 = VECTOR('',#14274,1.);+#14274 = DIRECTION('',(0.,1.));+#14275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14276 = ORIENTED_EDGE('',*,*,#14277,.T.);+#14277 = EDGE_CURVE('',#14255,#14179,#14278,.T.);+#14278 = SURFACE_CURVE('',#14279,(#14283,#14290),.PCURVE_S1.);+#14279 = LINE('',#14280,#14281);+#14280 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+    0.193144044696));+#14281 = VECTOR('',#14282,1.);+#14282 = DIRECTION('',(0.,0.,-1.));+#14283 = PCURVE('',#6728,#14284);+#14284 = DEFINITIONAL_REPRESENTATION('',(#14285),#14289);+#14285 = LINE('',#14286,#14287);+#14286 = CARTESIAN_POINT('',(2.8346052626E-02,0.));+#14287 = VECTOR('',#14288,1.);+#14288 = DIRECTION('',(0.,1.));+#14289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14290 = PCURVE('',#14217,#14291);+#14291 = DEFINITIONAL_REPRESENTATION('',(#14292),#14296);+#14292 = LINE('',#14293,#14294);+#14293 = CARTESIAN_POINT('',(0.172538053076,0.));+#14294 = VECTOR('',#14295,1.);+#14295 = DIRECTION('',(0.,-1.));+#14296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14297 = ORIENTED_EDGE('',*,*,#14178,.T.);+#14298 = ADVANCED_FACE('',(#14299),#6700,.F.);+#14299 = FACE_BOUND('',#14300,.F.);+#14300 = EDGE_LOOP('',(#14301,#14302,#14325,#14346));+#14301 = ORIENTED_EDGE('',*,*,#6684,.F.);+#14302 = ORIENTED_EDGE('',*,*,#14303,.T.);+#14303 = EDGE_CURVE('',#6657,#14304,#14306,.T.);+#14304 = VERTEX_POINT('',#14305);+#14305 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+    0.193144044696));+#14306 = SURFACE_CURVE('',#14307,(#14311,#14318),.PCURVE_S1.);+#14307 = LINE('',#14308,#14309);+#14308 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#14309 = VECTOR('',#14310,1.);+#14310 = DIRECTION('',(0.,-1.,0.));+#14311 = PCURVE('',#6700,#14312);+#14312 = DEFINITIONAL_REPRESENTATION('',(#14313),#14317);+#14313 = LINE('',#14314,#14315);+#14314 = CARTESIAN_POINT('',(-3.7852532178E-02,0.333610214248));+#14315 = VECTOR('',#14316,1.);+#14316 = DIRECTION('',(0.,-1.));+#14317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14318 = PCURVE('',#6672,#14319);+#14319 = DEFINITIONAL_REPRESENTATION('',(#14320),#14324);+#14320 = LINE('',#14321,#14322);+#14321 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#14322 = VECTOR('',#14323,1.);+#14323 = DIRECTION('',(1.,0.));+#14324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14325 = ORIENTED_EDGE('',*,*,#14326,.T.);+#14326 = EDGE_CURVE('',#14304,#14255,#14327,.T.);+#14327 = SURFACE_CURVE('',#14328,(#14332,#14339),.PCURVE_S1.);+#14328 = LINE('',#14329,#14330);+#14329 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+    0.193144044696));+#14330 = VECTOR('',#14331,1.);+#14331 = DIRECTION('',(1.,0.,0.));+#14332 = PCURVE('',#6700,#14333);+#14333 = DEFINITIONAL_REPRESENTATION('',(#14334),#14338);+#14334 = LINE('',#14335,#14336);+#14335 = CARTESIAN_POINT('',(-3.7852532178E-02,0.287940178322));+#14336 = VECTOR('',#14337,1.);+#14337 = DIRECTION('',(1.,0.));+#14338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14339 = PCURVE('',#14217,#14340);+#14340 = DEFINITIONAL_REPRESENTATION('',(#14341),#14345);+#14341 = LINE('',#14342,#14343);+#14342 = CARTESIAN_POINT('',(0.252538053074,0.));+#14343 = VECTOR('',#14344,1.);+#14344 = DIRECTION('',(-1.,0.));+#14345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14346 = ORIENTED_EDGE('',*,*,#14254,.T.);+#14347 = ADVANCED_FACE('',(#14348),#6672,.T.);+#14348 = FACE_BOUND('',#14349,.F.);+#14349 = EDGE_LOOP('',(#14350,#14351,#14352,#14373));+#14350 = ORIENTED_EDGE('',*,*,#6656,.T.);+#14351 = ORIENTED_EDGE('',*,*,#14229,.F.);+#14352 = ORIENTED_EDGE('',*,*,#14353,.F.);+#14353 = EDGE_CURVE('',#14304,#14202,#14354,.T.);+#14354 = SURFACE_CURVE('',#14355,(#14359,#14366),.PCURVE_S1.);+#14355 = LINE('',#14356,#14357);+#14356 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+    0.193144044696));+#14357 = VECTOR('',#14358,1.);+#14358 = DIRECTION('',(0.,0.,-1.));+#14359 = PCURVE('',#6672,#14360);+#14360 = DEFINITIONAL_REPRESENTATION('',(#14361),#14365);+#14361 = LINE('',#14362,#14363);+#14362 = CARTESIAN_POINT('',(0.106653947374,0.));+#14363 = VECTOR('',#14364,1.);+#14364 = DIRECTION('',(0.,1.));+#14365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14366 = PCURVE('',#14217,#14367);+#14367 = DEFINITIONAL_REPRESENTATION('',(#14368),#14372);+#14368 = LINE('',#14369,#14370);+#14369 = CARTESIAN_POINT('',(0.252538053074,0.));+#14370 = VECTOR('',#14371,1.);+#14371 = DIRECTION('',(0.,-1.));+#14372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14373 = ORIENTED_EDGE('',*,*,#14303,.F.);+#14374 = ADVANCED_FACE('',(#14375),#14217,.T.);+#14375 = FACE_BOUND('',#14376,.F.);+#14376 = EDGE_LOOP('',(#14377,#14378,#14379,#14380));+#14377 = ORIENTED_EDGE('',*,*,#14353,.T.);+#14378 = ORIENTED_EDGE('',*,*,#14201,.F.);+#14379 = ORIENTED_EDGE('',*,*,#14277,.F.);+#14380 = ORIENTED_EDGE('',*,*,#14326,.F.);+#14381 = ADVANCED_FACE('',(#14382),#3200,.F.);+#14382 = FACE_BOUND('',#14383,.F.);+#14383 = EDGE_LOOP('',(#14384,#14385,#14386,#14409));+#14384 = ORIENTED_EDGE('',*,*,#4607,.F.);+#14385 = ORIENTED_EDGE('',*,*,#3184,.F.);+#14386 = ORIENTED_EDGE('',*,*,#14387,.F.);+#14387 = EDGE_CURVE('',#14388,#3157,#14390,.T.);+#14388 = VERTEX_POINT('',#14389);+#14389 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+    9.314404469578E-02));+#14390 = SURFACE_CURVE('',#14391,(#14395,#14402),.PCURVE_S1.);+#14391 = LINE('',#14392,#14393);+#14392 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+    9.314404469578E-02));+#14393 = VECTOR('',#14394,1.);+#14394 = DIRECTION('',(0.,0.,-1.));+#14395 = PCURVE('',#3200,#14396);+#14396 = DEFINITIONAL_REPRESENTATION('',(#14397),#14401);+#14397 = LINE('',#14398,#14399);+#14398 = CARTESIAN_POINT('',(4.153331351416E-12,0.));+#14399 = VECTOR('',#14400,1.);+#14400 = DIRECTION('',(0.,1.));+#14401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14402 = PCURVE('',#3172,#14403);+#14403 = DEFINITIONAL_REPRESENTATION('',(#14404),#14408);+#14404 = LINE('',#14405,#14406);+#14405 = CARTESIAN_POINT('',(-6.606579991408E-09,0.));+#14406 = VECTOR('',#14407,1.);+#14407 = DIRECTION('',(0.,-1.));+#14408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14409 = ORIENTED_EDGE('',*,*,#14410,.T.);+#14410 = EDGE_CURVE('',#14388,#4608,#14411,.T.);+#14411 = SURFACE_CURVE('',#14412,(#14416,#14423),.PCURVE_S1.);+#14412 = LINE('',#14413,#14414);+#14413 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+    9.314404469578E-02));+#14414 = VECTOR('',#14415,1.);+#14415 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#14416 = PCURVE('',#3200,#14417);+#14417 = DEFINITIONAL_REPRESENTATION('',(#14418),#14422);+#14418 = LINE('',#14419,#14420);+#14419 = CARTESIAN_POINT('',(4.153331351416E-12,0.));+#14420 = VECTOR('',#14421,1.);+#14421 = DIRECTION('',(1.,0.));+#14422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14423 = PCURVE('',#4229,#14424);+#14424 = DEFINITIONAL_REPRESENTATION('',(#14425),#14429);+#14425 = LINE('',#14426,#14427);+#14426 = CARTESIAN_POINT('',(-0.520267411263,-0.915763807487));+#14427 = VECTOR('',#14428,1.);+#14428 = DIRECTION('',(-0.90618313999,0.422885465342));+#14429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14430 = ADVANCED_FACE('',(#14431),#3172,.F.);+#14431 = FACE_BOUND('',#14432,.F.);+#14432 = EDGE_LOOP('',(#14433,#14434,#14457,#14478));+#14433 = ORIENTED_EDGE('',*,*,#3156,.T.);+#14434 = ORIENTED_EDGE('',*,*,#14435,.T.);+#14435 = EDGE_CURVE('',#3129,#14436,#14438,.T.);+#14436 = VERTEX_POINT('',#14437);+#14437 = CARTESIAN_POINT('',(0.199462039425,0.310692661501,+    9.314404469578E-02));+#14438 = SURFACE_CURVE('',#14439,(#14443,#14450),.PCURVE_S1.);+#14439 = LINE('',#14440,#14441);+#14440 = CARTESIAN_POINT('',(0.199462039425,0.310692661501,0.));+#14441 = VECTOR('',#14442,1.);+#14442 = DIRECTION('',(0.,0.,1.));+#14443 = PCURVE('',#3172,#14444);+#14444 = DEFINITIONAL_REPRESENTATION('',(#14445),#14449);+#14445 = LINE('',#14446,#14447);+#14446 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#14447 = VECTOR('',#14448,1.);+#14448 = DIRECTION('',(0.,1.));+#14449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14450 = PCURVE('',#3144,#14451);+#14451 = DEFINITIONAL_REPRESENTATION('',(#14452),#14456);+#14452 = LINE('',#14453,#14454);+#14453 = CARTESIAN_POINT('',(0.100000000003,9.314404469578E-02));+#14454 = VECTOR('',#14455,1.);+#14455 = DIRECTION('',(0.,-1.));+#14456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14457 = ORIENTED_EDGE('',*,*,#14458,.F.);+#14458 = EDGE_CURVE('',#14388,#14436,#14459,.T.);+#14459 = SURFACE_CURVE('',#14460,(#14464,#14471),.PCURVE_S1.);+#14460 = LINE('',#14461,#14462);+#14461 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+    9.314404469578E-02));+#14462 = VECTOR('',#14463,1.);+#14463 = DIRECTION('',(1.,0.,0.));+#14464 = PCURVE('',#3172,#14465);+#14465 = DEFINITIONAL_REPRESENTATION('',(#14466),#14470);+#14466 = LINE('',#14467,#14468);+#14467 = CARTESIAN_POINT('',(-6.606579991408E-09,0.));+#14468 = VECTOR('',#14469,1.);+#14469 = DIRECTION('',(1.,0.));+#14470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14471 = PCURVE('',#4229,#14472);+#14472 = DEFINITIONAL_REPRESENTATION('',(#14473),#14477);+#14473 = LINE('',#14474,#14475);+#14474 = CARTESIAN_POINT('',(-0.520267411263,-0.915763807487));+#14475 = VECTOR('',#14476,1.);+#14476 = DIRECTION('',(1.,0.));+#14477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14478 = ORIENTED_EDGE('',*,*,#14387,.T.);+#14479 = ADVANCED_FACE('',(#14480),#3144,.F.);+#14480 = FACE_BOUND('',#14481,.F.);+#14481 = EDGE_LOOP('',(#14482,#14483,#14506,#14527));+#14482 = ORIENTED_EDGE('',*,*,#3128,.F.);+#14483 = ORIENTED_EDGE('',*,*,#14484,.T.);+#14484 = EDGE_CURVE('',#3101,#14485,#14487,.T.);+#14485 = VERTEX_POINT('',#14486);+#14486 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,+    9.314404469578E-02));+#14487 = SURFACE_CURVE('',#14488,(#14492,#14499),.PCURVE_S1.);+#14488 = LINE('',#14489,#14490);+#14489 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,0.));+#14490 = VECTOR('',#14491,1.);+#14491 = DIRECTION('',(0.,0.,1.));+#14492 = PCURVE('',#3144,#14493);+#14493 = DEFINITIONAL_REPRESENTATION('',(#14494),#14498);+#14494 = LINE('',#14495,#14496);+#14495 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14496 = VECTOR('',#14497,1.);+#14497 = DIRECTION('',(0.,-1.));+#14498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14499 = PCURVE('',#3116,#14500);+#14500 = DEFINITIONAL_REPRESENTATION('',(#14501),#14505);+#14501 = LINE('',#14502,#14503);+#14502 = CARTESIAN_POINT('',(1.000000000003,9.314404469578E-02));+#14503 = VECTOR('',#14504,1.);+#14504 = DIRECTION('',(0.,-1.));+#14505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14506 = ORIENTED_EDGE('',*,*,#14507,.T.);+#14507 = EDGE_CURVE('',#14485,#14436,#14508,.T.);+#14508 = SURFACE_CURVE('',#14509,(#14513,#14520),.PCURVE_S1.);+#14509 = LINE('',#14510,#14511);+#14510 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,+    9.314404469578E-02));+#14511 = VECTOR('',#14512,1.);+#14512 = DIRECTION('',(0.,1.,0.));+#14513 = PCURVE('',#3144,#14514);+#14514 = DEFINITIONAL_REPRESENTATION('',(#14515),#14519);+#14515 = LINE('',#14516,#14517);+#14516 = CARTESIAN_POINT('',(0.,0.));+#14517 = VECTOR('',#14518,1.);+#14518 = DIRECTION('',(1.,0.));+#14519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14520 = PCURVE('',#4229,#14521);+#14521 = DEFINITIONAL_REPRESENTATION('',(#14522),#14526);+#14522 = LINE('',#14523,#14524);+#14523 = CARTESIAN_POINT('',(-0.395267411252,-1.01576380749));+#14524 = VECTOR('',#14525,1.);+#14525 = DIRECTION('',(0.,1.));+#14526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14527 = ORIENTED_EDGE('',*,*,#14435,.F.);+#14528 = ADVANCED_FACE('',(#14529),#3116,.F.);+#14529 = FACE_BOUND('',#14530,.F.);+#14530 = EDGE_LOOP('',(#14531,#14532,#14555,#14576));+#14531 = ORIENTED_EDGE('',*,*,#3100,.F.);+#14532 = ORIENTED_EDGE('',*,*,#14533,.F.);+#14533 = EDGE_CURVE('',#14534,#3068,#14536,.T.);+#14534 = VERTEX_POINT('',#14535);+#14535 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+    9.314404469578E-02));+#14536 = SURFACE_CURVE('',#14537,(#14541,#14548),.PCURVE_S1.);+#14537 = LINE('',#14538,#14539);+#14538 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+    9.314404469578E-02));+#14539 = VECTOR('',#14540,1.);+#14540 = DIRECTION('',(2.62897119786E-10,0.,-1.));+#14541 = PCURVE('',#3116,#14542);+#14542 = DEFINITIONAL_REPRESENTATION('',(#14543),#14547);+#14543 = LINE('',#14544,#14545);+#14544 = CARTESIAN_POINT('',(0.,0.));+#14545 = VECTOR('',#14546,1.);+#14546 = DIRECTION('',(-2.62897119786E-10,1.));+#14547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14548 = PCURVE('',#3088,#14549);+#14549 = DEFINITIONAL_REPRESENTATION('',(#14550),#14554);+#14550 = LINE('',#14551,#14552);+#14551 = CARTESIAN_POINT('',(1.570796327003,0.));+#14552 = VECTOR('',#14553,1.);+#14553 = DIRECTION('',(-2.62897119786E-09,1.));+#14554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14555 = ORIENTED_EDGE('',*,*,#14556,.T.);+#14556 = EDGE_CURVE('',#14534,#14485,#14557,.T.);+#14557 = SURFACE_CURVE('',#14558,(#14562,#14569),.PCURVE_S1.);+#14558 = LINE('',#14559,#14560);+#14559 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+    9.314404469578E-02));+#14560 = VECTOR('',#14561,1.);+#14561 = DIRECTION('',(-1.,-6.308537026077E-11,0.));+#14562 = PCURVE('',#3116,#14563);+#14563 = DEFINITIONAL_REPRESENTATION('',(#14564),#14568);+#14564 = LINE('',#14565,#14566);+#14565 = CARTESIAN_POINT('',(0.,0.));+#14566 = VECTOR('',#14567,1.);+#14567 = DIRECTION('',(1.,0.));+#14568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14569 = PCURVE('',#4229,#14570);+#14570 = DEFINITIONAL_REPRESENTATION('',(#14571),#14575);+#14571 = LINE('',#14572,#14573);+#14572 = CARTESIAN_POINT('',(0.604732588751,-1.015763807427));+#14573 = VECTOR('',#14574,1.);+#14574 = DIRECTION('',(-1.,-6.308537026077E-11));+#14575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14576 = ORIENTED_EDGE('',*,*,#14484,.F.);+#14577 = ADVANCED_FACE('',(#14578),#3088,.F.);+#14578 = FACE_BOUND('',#14579,.F.);+#14579 = EDGE_LOOP('',(#14580,#14581,#14604,#14630));+#14580 = ORIENTED_EDGE('',*,*,#3067,.F.);+#14581 = ORIENTED_EDGE('',*,*,#14582,.T.);+#14582 = EDGE_CURVE('',#3040,#14583,#14585,.T.);+#14583 = VERTEX_POINT('',#14584);+#14584 = CARTESIAN_POINT('',(1.299462039438,0.31069266149,+    9.314404469578E-02));+#14585 = SURFACE_CURVE('',#14586,(#14590,#14597),.PCURVE_S1.);+#14586 = LINE('',#14587,#14588);+#14587 = CARTESIAN_POINT('',(1.299462039433,0.310692661534,0.));+#14588 = VECTOR('',#14589,1.);+#14589 = DIRECTION('',(0.,-1.345166186988E-11,1.));+#14590 = PCURVE('',#3088,#14591);+#14591 = DEFINITIONAL_REPRESENTATION('',(#14592),#14596);+#14592 = LINE('',#14593,#14594);+#14593 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14594 = VECTOR('',#14595,1.);+#14595 = DIRECTION('',(0.,-1.));+#14596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14597 = PCURVE('',#3055,#14598);+#14598 = DEFINITIONAL_REPRESENTATION('',(#14599),#14603);+#14599 = LINE('',#14600,#14601);+#14600 = CARTESIAN_POINT('',(1.849906848574,9.314404469578E-02));+#14601 = VECTOR('',#14602,1.);+#14602 = DIRECTION('',(1.345166186988E-11,-1.));+#14603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14604 = ORIENTED_EDGE('',*,*,#14605,.T.);+#14605 = EDGE_CURVE('',#14583,#14534,#14606,.T.);+#14606 = SURFACE_CURVE('',#14607,(#14612,#14619),.PCURVE_S1.);+#14607 = CIRCLE('',#14608,9.999999999127E-02);+#14608 = AXIS2_PLACEMENT_3D('',#14609,#14610,#14611);+#14609 = CARTESIAN_POINT('',(1.199462039447,0.310692661553,+    9.314404469578E-02));+#14610 = DIRECTION('',(0.,0.,-1.));+#14611 = DIRECTION('',(1.,-6.266553942972E-10,0.));+#14612 = PCURVE('',#3088,#14613);+#14613 = DEFINITIONAL_REPRESENTATION('',(#14614),#14618);+#14614 = LINE('',#14615,#14616);+#14615 = CARTESIAN_POINT('',(0.,0.));+#14616 = VECTOR('',#14617,1.);+#14617 = DIRECTION('',(1.,0.));+#14618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14619 = PCURVE('',#4229,#14620);+#14620 = DEFINITIONAL_REPRESENTATION('',(#14621),#14629);+#14621 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14622,#14623,#14624,#14625+    ,#14626,#14627,#14628),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#14622 = CARTESIAN_POINT('',(0.704732588761,-0.915763807498));+#14623 = CARTESIAN_POINT('',(0.704732588653,-1.088968888239));+#14624 = CARTESIAN_POINT('',(0.55473258872,-1.002366347775));+#14625 = CARTESIAN_POINT('',(0.404732588787,-0.91576380731));+#14626 = CARTESIAN_POINT('',(0.554732588829,-0.829161267033));+#14627 = CARTESIAN_POINT('',(0.70473258887,-0.742558726756));+#14628 = CARTESIAN_POINT('',(0.704732588761,-0.915763807498));+#14629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14630 = ORIENTED_EDGE('',*,*,#14533,.T.);+#14631 = ADVANCED_FACE('',(#14632),#3055,.F.);+#14632 = FACE_BOUND('',#14633,.F.);+#14633 = EDGE_LOOP('',(#14634,#14635,#14658,#14679));+#14634 = ORIENTED_EDGE('',*,*,#3039,.F.);+#14635 = ORIENTED_EDGE('',*,*,#14636,.F.);+#14636 = EDGE_CURVE('',#14637,#3007,#14639,.T.);+#14637 = VERTEX_POINT('',#14638);+#14638 = CARTESIAN_POINT('',(1.299462039425,2.160599510056,+    9.314404469578E-02));+#14639 = SURFACE_CURVE('',#14640,(#14644,#14651),.PCURVE_S1.);+#14640 = LINE('',#14641,#14642);+#14641 = CARTESIAN_POINT('',(1.299462039425,2.160599510056,+    9.314404469578E-02));+#14642 = VECTOR('',#14643,1.);+#14643 = DIRECTION('',(0.,4.359647198199E-11,-1.));+#14644 = PCURVE('',#3055,#14645);+#14645 = DEFINITIONAL_REPRESENTATION('',(#14646),#14650);+#14646 = LINE('',#14647,#14648);+#14647 = CARTESIAN_POINT('',(5.200018193818E-11,0.));+#14648 = VECTOR('',#14649,1.);+#14649 = DIRECTION('',(-4.359647198199E-11,1.));+#14650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14651 = PCURVE('',#3027,#14652);+#14652 = DEFINITIONAL_REPRESENTATION('',(#14653),#14657);+#14653 = LINE('',#14654,#14655);+#14654 = CARTESIAN_POINT('',(1.570796327285,0.));+#14655 = VECTOR('',#14656,1.);+#14656 = DIRECTION('',(-4.359647198199E-10,1.));+#14657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14658 = ORIENTED_EDGE('',*,*,#14659,.T.);+#14659 = EDGE_CURVE('',#14637,#14583,#14660,.T.);+#14660 = SURFACE_CURVE('',#14661,(#14665,#14672),.PCURVE_S1.);+#14661 = LINE('',#14662,#14663);+#14662 = CARTESIAN_POINT('',(1.299462039425,2.160599510056,+    9.314404469578E-02));+#14663 = VECTOR('',#14664,1.);+#14664 = DIRECTION('',(4.464281538052E-12,-1.,0.));+#14665 = PCURVE('',#3055,#14666);+#14666 = DEFINITIONAL_REPRESENTATION('',(#14667),#14671);+#14667 = LINE('',#14668,#14669);+#14668 = CARTESIAN_POINT('',(5.200018193818E-11,0.));+#14669 = VECTOR('',#14670,1.);+#14670 = DIRECTION('',(1.,0.));+#14671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14672 = PCURVE('',#4229,#14673);+#14673 = DEFINITIONAL_REPRESENTATION('',(#14674),#14678);+#14674 = LINE('',#14675,#14676);+#14675 = CARTESIAN_POINT('',(0.704732588748,0.934143041068));+#14676 = VECTOR('',#14677,1.);+#14677 = DIRECTION('',(4.464281538052E-12,-1.));+#14678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14679 = ORIENTED_EDGE('',*,*,#14582,.F.);+#14680 = ADVANCED_FACE('',(#14681),#3027,.F.);+#14681 = FACE_BOUND('',#14682,.F.);+#14682 = EDGE_LOOP('',(#14683,#14684,#14707,#14733));+#14683 = ORIENTED_EDGE('',*,*,#3006,.F.);+#14684 = ORIENTED_EDGE('',*,*,#14685,.T.);+#14685 = EDGE_CURVE('',#2979,#14686,#14688,.T.);+#14686 = VERTEX_POINT('',#14687);+#14687 = CARTESIAN_POINT('',(1.199462039255,2.260599510107,+    9.314404469578E-02));+#14688 = SURFACE_CURVE('',#14689,(#14693,#14700),.PCURVE_S1.);+#14689 = LINE('',#14690,#14691);+#14690 = CARTESIAN_POINT('',(1.199462039364,2.260599510119,0.));+#14691 = VECTOR('',#14692,1.);+#14692 = DIRECTION('',(-6.123959802851E-11,0.,1.));+#14693 = PCURVE('',#3027,#14694);+#14694 = DEFINITIONAL_REPRESENTATION('',(#14695),#14699);+#14695 = LINE('',#14696,#14697);+#14696 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14697 = VECTOR('',#14698,1.);+#14698 = DIRECTION('',(0.,-1.));+#14699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14700 = PCURVE('',#2994,#14701);+#14701 = DEFINITIONAL_REPRESENTATION('',(#14702),#14706);+#14702 = LINE('',#14703,#14704);+#14703 = CARTESIAN_POINT('',(0.99995948426,9.314404469578E-02));+#14704 = VECTOR('',#14705,1.);+#14705 = DIRECTION('',(-6.123959802851E-11,-1.));+#14706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14707 = ORIENTED_EDGE('',*,*,#14708,.T.);+#14708 = EDGE_CURVE('',#14686,#14637,#14709,.T.);+#14709 = SURFACE_CURVE('',#14710,(#14715,#14722),.PCURVE_S1.);+#14710 = CIRCLE('',#14711,0.100000000003);+#14711 = AXIS2_PLACEMENT_3D('',#14712,#14713,#14714);+#14712 = CARTESIAN_POINT('',(1.19946203941,2.160599510105,+    9.314404469578E-02));+#14713 = DIRECTION('',(0.,0.,-1.));+#14714 = DIRECTION('',(-1.55373935935E-09,1.,0.));+#14715 = PCURVE('',#3027,#14716);+#14716 = DEFINITIONAL_REPRESENTATION('',(#14717),#14721);+#14717 = LINE('',#14718,#14719);+#14718 = CARTESIAN_POINT('',(-1.553739359395E-09,0.));+#14719 = VECTOR('',#14720,1.);+#14720 = DIRECTION('',(1.,0.));+#14721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14722 = PCURVE('',#4229,#14723);+#14723 = DEFINITIONAL_REPRESENTATION('',(#14724),#14732);+#14724 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14725,#14726,#14727,#14728+    ,#14729,#14730,#14731),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#14725 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#14726 = CARTESIAN_POINT('',(0.77793766934,1.034143041389));+#14727 = CARTESIAN_POINT('',(0.691335129192,0.88414304125));+#14728 = CARTESIAN_POINT('',(0.604732589044,0.734143041111));+#14729 = CARTESIAN_POINT('',(0.51813004843,0.884143040981));+#14730 = CARTESIAN_POINT('',(0.431527507816,1.034143040851));+#14731 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#14732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14733 = ORIENTED_EDGE('',*,*,#14636,.T.);+#14734 = ADVANCED_FACE('',(#14735),#2994,.F.);+#14735 = FACE_BOUND('',#14736,.F.);+#14736 = EDGE_LOOP('',(#14737,#14738,#14761,#14782));+#14737 = ORIENTED_EDGE('',*,*,#2978,.F.);+#14738 = ORIENTED_EDGE('',*,*,#14739,.T.);+#14739 = EDGE_CURVE('',#2951,#14740,#14742,.T.);+#14740 = VERTEX_POINT('',#14741);+#14741 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,+    9.314404469578E-02));+#14742 = SURFACE_CURVE('',#14743,(#14747,#14754),.PCURVE_S1.);+#14743 = LINE('',#14744,#14745);+#14744 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,0.));+#14745 = VECTOR('',#14746,1.);+#14746 = DIRECTION('',(0.,0.,1.));+#14747 = PCURVE('',#2994,#14748);+#14748 = DEFINITIONAL_REPRESENTATION('',(#14749),#14753);+#14749 = LINE('',#14750,#14751);+#14750 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14751 = VECTOR('',#14752,1.);+#14752 = DIRECTION('',(0.,-1.));+#14753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14754 = PCURVE('',#2966,#14755);+#14755 = DEFINITIONAL_REPRESENTATION('',(#14756),#14760);+#14756 = LINE('',#14757,#14758);+#14757 = CARTESIAN_POINT('',(0.199906852714,9.314404469578E-02));+#14758 = VECTOR('',#14759,1.);+#14759 = DIRECTION('',(0.,-1.));+#14760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14761 = ORIENTED_EDGE('',*,*,#14762,.T.);+#14762 = EDGE_CURVE('',#14740,#14686,#14763,.T.);+#14763 = SURFACE_CURVE('',#14764,(#14768,#14775),.PCURVE_S1.);+#14764 = LINE('',#14765,#14766);+#14765 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,+    9.314404469578E-02));+#14766 = VECTOR('',#14767,1.);+#14767 = DIRECTION('',(1.,1.17843846365E-11,0.));+#14768 = PCURVE('',#2994,#14769);+#14769 = DEFINITIONAL_REPRESENTATION('',(#14770),#14774);+#14770 = LINE('',#14771,#14772);+#14771 = CARTESIAN_POINT('',(0.,0.));+#14772 = VECTOR('',#14773,1.);+#14773 = DIRECTION('',(1.,0.));+#14774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14775 = PCURVE('',#4229,#14776);+#14776 = DEFINITIONAL_REPRESENTATION('',(#14777),#14781);+#14777 = LINE('',#14778,#14779);+#14778 = CARTESIAN_POINT('',(-0.395226895573,1.034143041119));+#14779 = VECTOR('',#14780,1.);+#14780 = DIRECTION('',(1.,1.17843846365E-11));+#14781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14782 = ORIENTED_EDGE('',*,*,#14685,.F.);+#14783 = ADVANCED_FACE('',(#14784),#2966,.F.);+#14784 = FACE_BOUND('',#14785,.F.);+#14785 = EDGE_LOOP('',(#14786,#14787,#14810,#14831));+#14786 = ORIENTED_EDGE('',*,*,#2950,.F.);+#14787 = ORIENTED_EDGE('',*,*,#14788,.T.);+#14788 = EDGE_CURVE('',#2923,#14789,#14791,.T.);+#14789 = VERTEX_POINT('',#14790);+#14790 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,+    9.314404469578E-02));+#14791 = SURFACE_CURVE('',#14792,(#14796,#14803),.PCURVE_S1.);+#14792 = LINE('',#14793,#14794);+#14793 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#14794 = VECTOR('',#14795,1.);+#14795 = DIRECTION('',(0.,0.,1.));+#14796 = PCURVE('',#2966,#14797);+#14797 = DEFINITIONAL_REPRESENTATION('',(#14798),#14802);+#14798 = LINE('',#14799,#14800);+#14799 = CARTESIAN_POINT('',(2.999822674683E-12,9.314404469578E-02));+#14800 = VECTOR('',#14801,1.);+#14801 = DIRECTION('',(0.,-1.));+#14802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14803 = PCURVE('',#2938,#14804);+#14804 = DEFINITIONAL_REPRESENTATION('',(#14805),#14809);+#14805 = LINE('',#14806,#14807);+#14806 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#14807 = VECTOR('',#14808,1.);+#14808 = DIRECTION('',(0.,1.));+#14809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14810 = ORIENTED_EDGE('',*,*,#14811,.T.);+#14811 = EDGE_CURVE('',#14789,#14740,#14812,.T.);+#14812 = SURFACE_CURVE('',#14813,(#14817,#14824),.PCURVE_S1.);+#14813 = LINE('',#14814,#14815);+#14814 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,+    9.314404469578E-02));+#14815 = VECTOR('',#14816,1.);+#14816 = DIRECTION('',(2.026727863385E-04,0.999999979462,0.));+#14817 = PCURVE('',#2966,#14818);+#14818 = DEFINITIONAL_REPRESENTATION('',(#14819),#14823);+#14819 = LINE('',#14820,#14821);+#14820 = CARTESIAN_POINT('',(2.999822674683E-12,0.));+#14821 = VECTOR('',#14822,1.);+#14822 = DIRECTION('',(1.,0.));+#14823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14824 = PCURVE('',#4229,#14825);+#14825 = DEFINITIONAL_REPRESENTATION('',(#14826),#14830);+#14826 = LINE('',#14827,#14828);+#14827 = CARTESIAN_POINT('',(-0.395267411252,0.834236192514));+#14828 = VECTOR('',#14829,1.);+#14829 = DIRECTION('',(2.026727863385E-04,0.999999979462));+#14830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14831 = ORIENTED_EDGE('',*,*,#14739,.F.);+#14832 = ADVANCED_FACE('',(#14833),#2938,.F.);+#14833 = FACE_BOUND('',#14834,.F.);+#14834 = EDGE_LOOP('',(#14835,#14836,#14859,#14880));+#14835 = ORIENTED_EDGE('',*,*,#2922,.T.);+#14836 = ORIENTED_EDGE('',*,*,#14837,.T.);+#14837 = EDGE_CURVE('',#2895,#14838,#14840,.T.);+#14838 = VERTEX_POINT('',#14839);+#14839 = CARTESIAN_POINT('',(7.446203942601E-02,2.060692661502,+    9.314404469578E-02));+#14840 = SURFACE_CURVE('',#14841,(#14845,#14852),.PCURVE_S1.);+#14841 = LINE('',#14842,#14843);+#14842 = CARTESIAN_POINT('',(7.446203942601E-02,2.060692661502,0.));+#14843 = VECTOR('',#14844,1.);+#14844 = DIRECTION('',(0.,0.,1.));+#14845 = PCURVE('',#2938,#14846);+#14846 = DEFINITIONAL_REPRESENTATION('',(#14847),#14851);+#14847 = LINE('',#14848,#14849);+#14848 = CARTESIAN_POINT('',(7.500000659099E-02,-9.314404469578E-02));+#14849 = VECTOR('',#14850,1.);+#14850 = DIRECTION('',(0.,1.));+#14851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14852 = PCURVE('',#2910,#14853);+#14853 = DEFINITIONAL_REPRESENTATION('',(#14854),#14858);+#14854 = LINE('',#14855,#14856);+#14855 = CARTESIAN_POINT('',(8.276472679259E-02,9.314404469578E-02));+#14856 = VECTOR('',#14857,1.);+#14857 = DIRECTION('',(0.,-1.));+#14858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14859 = ORIENTED_EDGE('',*,*,#14860,.F.);+#14860 = EDGE_CURVE('',#14789,#14838,#14861,.T.);+#14861 = SURFACE_CURVE('',#14862,(#14866,#14873),.PCURVE_S1.);+#14862 = LINE('',#14863,#14864);+#14863 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,+    9.314404469578E-02));+#14864 = VECTOR('',#14865,1.);+#14865 = DIRECTION('',(-1.,0.,0.));+#14866 = PCURVE('',#2938,#14867);+#14867 = DEFINITIONAL_REPRESENTATION('',(#14868),#14872);+#14868 = LINE('',#14869,#14870);+#14869 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#14870 = VECTOR('',#14871,1.);+#14871 = DIRECTION('',(1.,0.));+#14872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14873 = PCURVE('',#4229,#14874);+#14874 = DEFINITIONAL_REPRESENTATION('',(#14875),#14879);+#14875 = LINE('',#14876,#14877);+#14876 = CARTESIAN_POINT('',(-0.395267411252,0.834236192514));+#14877 = VECTOR('',#14878,1.);+#14878 = DIRECTION('',(-1.,0.));+#14879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14880 = ORIENTED_EDGE('',*,*,#14788,.F.);+#14881 = ADVANCED_FACE('',(#14882),#2910,.F.);+#14882 = FACE_BOUND('',#14883,.F.);+#14883 = EDGE_LOOP('',(#14884,#14885,#14906,#14907));+#14884 = ORIENTED_EDGE('',*,*,#5263,.T.);+#14885 = ORIENTED_EDGE('',*,*,#14886,.T.);+#14886 = EDGE_CURVE('',#5241,#14838,#14887,.T.);+#14887 = SURFACE_CURVE('',#14888,(#14892,#14899),.PCURVE_S1.);+#14888 = LINE('',#14889,#14890);+#14889 = CARTESIAN_POINT('',(0.,2.025943709769,9.314404469578E-02));+#14890 = VECTOR('',#14891,1.);+#14891 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#14892 = PCURVE('',#2910,#14893);+#14893 = DEFINITIONAL_REPRESENTATION('',(#14894),#14898);+#14894 = LINE('',#14895,#14896);+#14895 = CARTESIAN_POINT('',(5.936554716987E-04,0.));+#14896 = VECTOR('',#14897,1.);+#14897 = DIRECTION('',(1.,0.));+#14898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14899 = PCURVE('',#4229,#14900);+#14900 = DEFINITIONAL_REPRESENTATION('',(#14901),#14905);+#14901 = LINE('',#14902,#14903);+#14902 = CARTESIAN_POINT('',(-0.594729450677,0.799487240781));+#14903 = VECTOR('',#14904,1.);+#14904 = DIRECTION('',(0.90618313999,0.422885465342));+#14905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14906 = ORIENTED_EDGE('',*,*,#14837,.F.);+#14907 = ORIENTED_EDGE('',*,*,#2894,.F.);+#14908 = ADVANCED_FACE('',(#14909),#4229,.F.);+#14909 = FACE_BOUND('',#14910,.F.);+#14910 = EDGE_LOOP('',(#14911,#14912,#14913,#14914,#14915,#14916,#14917,+    #14918,#14919,#14920,#14921,#14922,#14923,#14924,#14947,#14975,+    #14996,#14997,#14998,#15021,#15044,#15067,#15088,#15089,#15112,+    #15140,#15161,#15162,#15185,#15208,#15231,#15254,#15275,#15276,+    #15299,#15327,#15348,#15349,#15372,#15395,#15418,#15441,#15462,+    #15463,#15486,#15514));+#14911 = ORIENTED_EDGE('',*,*,#4630,.F.);+#14912 = ORIENTED_EDGE('',*,*,#14410,.F.);+#14913 = ORIENTED_EDGE('',*,*,#14458,.T.);+#14914 = ORIENTED_EDGE('',*,*,#14507,.F.);+#14915 = ORIENTED_EDGE('',*,*,#14556,.F.);+#14916 = ORIENTED_EDGE('',*,*,#14605,.F.);+#14917 = ORIENTED_EDGE('',*,*,#14659,.F.);+#14918 = ORIENTED_EDGE('',*,*,#14708,.F.);+#14919 = ORIENTED_EDGE('',*,*,#14762,.F.);+#14920 = ORIENTED_EDGE('',*,*,#14811,.F.);+#14921 = ORIENTED_EDGE('',*,*,#14860,.T.);+#14922 = ORIENTED_EDGE('',*,*,#14886,.F.);+#14923 = ORIENTED_EDGE('',*,*,#5240,.F.);+#14924 = ORIENTED_EDGE('',*,*,#14925,.T.);+#14925 = EDGE_CURVE('',#5213,#14926,#14928,.T.);+#14926 = VERTEX_POINT('',#14927);+#14927 = CARTESIAN_POINT('',(4.317709717067E-02,1.975983918052,+    9.314404469578E-02));+#14928 = SURFACE_CURVE('',#14929,(#14933,#14940),.PCURVE_S1.);+#14929 = LINE('',#14930,#14931);+#14930 = CARTESIAN_POINT('',(0.,1.975983918052,9.314404469578E-02));+#14931 = VECTOR('',#14932,1.);+#14932 = DIRECTION('',(1.,0.,0.));+#14933 = PCURVE('',#4229,#14934);+#14934 = DEFINITIONAL_REPRESENTATION('',(#14935),#14939);+#14935 = LINE('',#14936,#14937);+#14936 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#14937 = VECTOR('',#14938,1.);+#14938 = DIRECTION('',(1.,0.));+#14939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14940 = PCURVE('',#5228,#14941);+#14941 = DEFINITIONAL_REPRESENTATION('',(#14942),#14946);+#14942 = LINE('',#14943,#14944);+#14943 = CARTESIAN_POINT('',(5.92586848756E-02,0.1));+#14944 = VECTOR('',#14945,1.);+#14945 = DIRECTION('',(-1.,-0.));+#14946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14947 = ORIENTED_EDGE('',*,*,#14948,.T.);+#14948 = EDGE_CURVE('',#14926,#14949,#14951,.T.);+#14949 = VERTEX_POINT('',#14950);+#14950 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+    9.314404469578E-02));+#14951 = SURFACE_CURVE('',#14952,(#14956,#14963),.PCURVE_S1.);+#14952 = LINE('',#14953,#14954);+#14953 = CARTESIAN_POINT('',(4.317709717067E-02,1.975983918052,+    9.314404469578E-02));+#14954 = VECTOR('',#14955,1.);+#14955 = DIRECTION('',(0.,-1.,0.));+#14956 = PCURVE('',#4229,#14957);+#14957 = DEFINITIONAL_REPRESENTATION('',(#14958),#14962);+#14958 = LINE('',#14959,#14960);+#14959 = CARTESIAN_POINT('',(-0.551552353506,0.749527449064));+#14960 = VECTOR('',#14961,1.);+#14961 = DIRECTION('',(0.,-1.));+#14962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14963 = PCURVE('',#14964,#14969);+#14964 = PLANE('',#14965);+#14965 = AXIS2_PLACEMENT_3D('',#14966,#14967,#14968);+#14966 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+    0.193144044696));+#14967 = DIRECTION('',(-1.,0.,0.));+#14968 = DIRECTION('',(0.,-1.,0.));+#14969 = DEFINITIONAL_REPRESENTATION('',(#14970),#14974);+#14970 = LINE('',#14971,#14972);+#14971 = CARTESIAN_POINT('',(0.513750127434,-0.1));+#14972 = VECTOR('',#14973,1.);+#14973 = DIRECTION('',(1.,0.));+#14974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14975 = ORIENTED_EDGE('',*,*,#14976,.T.);+#14976 = EDGE_CURVE('',#14949,#5134,#14977,.T.);+#14977 = SURFACE_CURVE('',#14978,(#14982,#14989),.PCURVE_S1.);+#14978 = LINE('',#14979,#14980);+#14979 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+    9.314404469578E-02));+#14980 = VECTOR('',#14981,1.);+#14981 = DIRECTION('',(-1.,0.,0.));+#14982 = PCURVE('',#4229,#14983);+#14983 = DEFINITIONAL_REPRESENTATION('',(#14984),#14988);+#14984 = LINE('',#14985,#14986);+#14985 = CARTESIAN_POINT('',(-0.551552353506,0.669527449065));+#14986 = VECTOR('',#14987,1.);+#14987 = DIRECTION('',(-1.,0.));+#14988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14989 = PCURVE('',#5172,#14990);+#14990 = DEFINITIONAL_REPRESENTATION('',(#14991),#14995);+#14991 = LINE('',#14992,#14993);+#14992 = CARTESIAN_POINT('',(0.118918412304,0.1));+#14993 = VECTOR('',#14994,1.);+#14994 = DIRECTION('',(-1.,0.));+#14995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#14996 = ORIENTED_EDGE('',*,*,#5133,.F.);+#14997 = ORIENTED_EDGE('',*,*,#4215,.F.);+#14998 = ORIENTED_EDGE('',*,*,#14999,.T.);+#14999 = EDGE_CURVE('',#4193,#15000,#15002,.T.);+#15000 = VERTEX_POINT('',#15001);+#15001 = CARTESIAN_POINT('',(0.199462039425,1.810692661497,+    9.314404469578E-02));+#15002 = SURFACE_CURVE('',#15003,(#15007,#15014),.PCURVE_S1.);+#15003 = LINE('',#15004,#15005);+#15004 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+    9.314404469578E-02));+#15005 = VECTOR('',#15006,1.);+#15006 = DIRECTION('',(1.,0.,0.));+#15007 = PCURVE('',#4229,#15008);+#15008 = DEFINITIONAL_REPRESENTATION('',(#15009),#15013);+#15009 = LINE('',#15010,#15011);+#15010 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#15011 = VECTOR('',#15012,1.);+#15012 = DIRECTION('',(1.,0.));+#15013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15014 = PCURVE('',#669,#15015);+#15015 = DEFINITIONAL_REPRESENTATION('',(#15016),#15020);+#15016 = LINE('',#15017,#15018);+#15017 = CARTESIAN_POINT('',(-6.599270005458E-09,0.));+#15018 = VECTOR('',#15019,1.);+#15019 = DIRECTION('',(1.,0.));+#15020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15021 = ORIENTED_EDGE('',*,*,#15022,.F.);+#15022 = EDGE_CURVE('',#15023,#15000,#15025,.T.);+#15023 = VERTEX_POINT('',#15024);+#15024 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,+    9.314404469578E-02));+#15025 = SURFACE_CURVE('',#15026,(#15030,#15037),.PCURVE_S1.);+#15026 = LINE('',#15027,#15028);+#15027 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,+    9.314404469578E-02));+#15028 = VECTOR('',#15029,1.);+#15029 = DIRECTION('',(0.,1.,0.));+#15030 = PCURVE('',#4229,#15031);+#15031 = DEFINITIONAL_REPRESENTATION('',(#15032),#15036);+#15032 = LINE('',#15033,#15034);+#15033 = CARTESIAN_POINT('',(-0.395267411252,0.334236192513));+#15034 = VECTOR('',#15035,1.);+#15035 = DIRECTION('',(0.,1.));+#15036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15037 = PCURVE('',#643,#15038);+#15038 = DEFINITIONAL_REPRESENTATION('',(#15039),#15043);+#15039 = LINE('',#15040,#15041);+#15040 = CARTESIAN_POINT('',(3.000044657142E-12,0.));+#15041 = VECTOR('',#15042,1.);+#15042 = DIRECTION('',(1.,0.));+#15043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15044 = ORIENTED_EDGE('',*,*,#15045,.T.);+#15045 = EDGE_CURVE('',#15023,#15046,#15048,.T.);+#15046 = VERTEX_POINT('',#15047);+#15047 = CARTESIAN_POINT('',(7.446203942237E-02,1.560692661501,+    9.314404469578E-02));+#15048 = SURFACE_CURVE('',#15049,(#15053,#15060),.PCURVE_S1.);+#15049 = LINE('',#15050,#15051);+#15050 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,+    9.314404469578E-02));+#15051 = VECTOR('',#15052,1.);+#15052 = DIRECTION('',(-1.,0.,0.));+#15053 = PCURVE('',#4229,#15054);+#15054 = DEFINITIONAL_REPRESENTATION('',(#15055),#15059);+#15055 = LINE('',#15056,#15057);+#15056 = CARTESIAN_POINT('',(-0.395267411252,0.334236192513));+#15057 = VECTOR('',#15058,1.);+#15058 = DIRECTION('',(-1.,0.));+#15059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15060 = PCURVE('',#615,#15061);+#15061 = DEFINITIONAL_REPRESENTATION('',(#15062),#15066);+#15062 = LINE('',#15063,#15064);+#15063 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#15064 = VECTOR('',#15065,1.);+#15065 = DIRECTION('',(1.,0.));+#15066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15067 = ORIENTED_EDGE('',*,*,#15068,.F.);+#15068 = EDGE_CURVE('',#5088,#15046,#15069,.T.);+#15069 = SURFACE_CURVE('',#15070,(#15074,#15081),.PCURVE_S1.);+#15070 = LINE('',#15071,#15072);+#15071 = CARTESIAN_POINT('',(0.,1.525943709769,9.314404469578E-02));+#15072 = VECTOR('',#15073,1.);+#15073 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#15074 = PCURVE('',#4229,#15075);+#15075 = DEFINITIONAL_REPRESENTATION('',(#15076),#15080);+#15076 = LINE('',#15077,#15078);+#15077 = CARTESIAN_POINT('',(-0.594729450677,0.299487240781));+#15078 = VECTOR('',#15079,1.);+#15079 = DIRECTION('',(0.90618313999,0.422885465342));+#15080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15081 = PCURVE('',#587,#15082);+#15082 = DEFINITIONAL_REPRESENTATION('',(#15083),#15087);+#15083 = LINE('',#15084,#15085);+#15084 = CARTESIAN_POINT('',(5.936554716993E-04,0.));+#15085 = VECTOR('',#15086,1.);+#15086 = DIRECTION('',(1.,0.));+#15087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15088 = ORIENTED_EDGE('',*,*,#5087,.F.);+#15089 = ORIENTED_EDGE('',*,*,#15090,.T.);+#15090 = EDGE_CURVE('',#5060,#15091,#15093,.T.);+#15091 = VERTEX_POINT('',#15092);+#15092 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+    9.314404469578E-02));+#15093 = SURFACE_CURVE('',#15094,(#15098,#15105),.PCURVE_S1.);+#15094 = LINE('',#15095,#15096);+#15095 = CARTESIAN_POINT('',(0.,1.47598391805,9.314404469578E-02));+#15096 = VECTOR('',#15097,1.);+#15097 = DIRECTION('',(1.,0.,0.));+#15098 = PCURVE('',#4229,#15099);+#15099 = DEFINITIONAL_REPRESENTATION('',(#15100),#15104);+#15100 = LINE('',#15101,#15102);+#15101 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#15102 = VECTOR('',#15103,1.);+#15103 = DIRECTION('',(1.,0.));+#15104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15105 = PCURVE('',#5075,#15106);+#15106 = DEFINITIONAL_REPRESENTATION('',(#15107),#15111);+#15107 = LINE('',#15108,#15109);+#15108 = CARTESIAN_POINT('',(5.92586848756E-02,0.1));+#15109 = VECTOR('',#15110,1.);+#15110 = DIRECTION('',(-1.,-0.));+#15111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15112 = ORIENTED_EDGE('',*,*,#15113,.T.);+#15113 = EDGE_CURVE('',#15091,#15114,#15116,.T.);+#15114 = VERTEX_POINT('',#15115);+#15115 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+    9.314404469578E-02));+#15116 = SURFACE_CURVE('',#15117,(#15121,#15128),.PCURVE_S1.);+#15117 = LINE('',#15118,#15119);+#15118 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+    9.314404469578E-02));+#15119 = VECTOR('',#15120,1.);+#15120 = DIRECTION('',(0.,-1.,0.));+#15121 = PCURVE('',#4229,#15122);+#15122 = DEFINITIONAL_REPRESENTATION('',(#15123),#15127);+#15123 = LINE('',#15124,#15125);+#15124 = CARTESIAN_POINT('',(-0.551552353506,0.249527449062));+#15125 = VECTOR('',#15126,1.);+#15126 = DIRECTION('',(0.,-1.));+#15127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15128 = PCURVE('',#15129,#15134);+#15129 = PLANE('',#15130);+#15130 = AXIS2_PLACEMENT_3D('',#15131,#15132,#15133);+#15131 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+    0.193144044696));+#15132 = DIRECTION('',(-1.,0.,0.));+#15133 = DIRECTION('',(0.,-1.,0.));+#15134 = DEFINITIONAL_REPRESENTATION('',(#15135),#15139);+#15135 = LINE('',#15136,#15137);+#15136 = CARTESIAN_POINT('',(1.013750127436,-0.1));+#15137 = VECTOR('',#15138,1.);+#15138 = DIRECTION('',(1.,0.));+#15139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15140 = ORIENTED_EDGE('',*,*,#15141,.T.);+#15141 = EDGE_CURVE('',#15114,#4981,#15142,.T.);+#15142 = SURFACE_CURVE('',#15143,(#15147,#15154),.PCURVE_S1.);+#15143 = LINE('',#15144,#15145);+#15144 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+    9.314404469578E-02));+#15145 = VECTOR('',#15146,1.);+#15146 = DIRECTION('',(-1.,0.,0.));+#15147 = PCURVE('',#4229,#15148);+#15148 = DEFINITIONAL_REPRESENTATION('',(#15149),#15153);+#15149 = LINE('',#15150,#15151);+#15150 = CARTESIAN_POINT('',(-0.551552353506,0.169527449064));+#15151 = VECTOR('',#15152,1.);+#15152 = DIRECTION('',(-1.,0.));+#15153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15154 = PCURVE('',#5019,#15155);+#15155 = DEFINITIONAL_REPRESENTATION('',(#15156),#15160);+#15156 = LINE('',#15157,#15158);+#15157 = CARTESIAN_POINT('',(0.118918412304,0.1));+#15158 = VECTOR('',#15159,1.);+#15159 = DIRECTION('',(-1.,0.));+#15160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15161 = ORIENTED_EDGE('',*,*,#4980,.F.);+#15162 = ORIENTED_EDGE('',*,*,#15163,.F.);+#15163 = EDGE_CURVE('',#15164,#4958,#15166,.T.);+#15164 = VERTEX_POINT('',#15165);+#15165 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+    9.314404469578E-02));+#15166 = SURFACE_CURVE('',#15167,(#15171,#15178),.PCURVE_S1.);+#15167 = LINE('',#15168,#15169);+#15168 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+    9.314404469578E-02));+#15169 = VECTOR('',#15170,1.);+#15170 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#15171 = PCURVE('',#4229,#15172);+#15172 = DEFINITIONAL_REPRESENTATION('',(#15173),#15177);+#15173 = LINE('',#15174,#15175);+#15174 = CARTESIAN_POINT('',(-0.520267411252,8.4236192507E-02));+#15175 = VECTOR('',#15176,1.);+#15176 = DIRECTION('',(-0.906183139987,0.422885465348));+#15177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15178 = PCURVE('',#707,#15179);+#15179 = DEFINITIONAL_REPRESENTATION('',(#15180),#15184);+#15180 = LINE('',#15181,#15182);+#15181 = CARTESIAN_POINT('',(-8.31567872547E-12,-0.));+#15182 = VECTOR('',#15183,1.);+#15183 = DIRECTION('',(1.,0.));+#15184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15185 = ORIENTED_EDGE('',*,*,#15186,.T.);+#15186 = EDGE_CURVE('',#15164,#15187,#15189,.T.);+#15187 = VERTEX_POINT('',#15188);+#15188 = CARTESIAN_POINT('',(0.199462039425,1.310692661495,+    9.314404469578E-02));+#15189 = SURFACE_CURVE('',#15190,(#15194,#15201),.PCURVE_S1.);+#15190 = LINE('',#15191,#15192);+#15191 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+    9.314404469578E-02));+#15192 = VECTOR('',#15193,1.);+#15193 = DIRECTION('',(1.,0.,0.));+#15194 = PCURVE('',#4229,#15195);+#15195 = DEFINITIONAL_REPRESENTATION('',(#15196),#15200);+#15196 = LINE('',#15197,#15198);+#15197 = CARTESIAN_POINT('',(-0.520267411252,8.4236192507E-02));+#15198 = VECTOR('',#15199,1.);+#15199 = DIRECTION('',(1.,0.));+#15200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15201 = PCURVE('',#840,#15202);+#15202 = DEFINITIONAL_REPRESENTATION('',(#15203),#15207);+#15203 = LINE('',#15204,#15205);+#15204 = CARTESIAN_POINT('',(-6.595630000494E-09,0.));+#15205 = VECTOR('',#15206,1.);+#15206 = DIRECTION('',(1.,0.));+#15207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15208 = ORIENTED_EDGE('',*,*,#15209,.F.);+#15209 = EDGE_CURVE('',#15210,#15187,#15212,.T.);+#15210 = VERTEX_POINT('',#15211);+#15211 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+    9.314404469578E-02));+#15212 = SURFACE_CURVE('',#15213,(#15217,#15224),.PCURVE_S1.);+#15213 = LINE('',#15214,#15215);+#15214 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+    9.314404469578E-02));+#15215 = VECTOR('',#15216,1.);+#15216 = DIRECTION('',(0.,1.,0.));+#15217 = PCURVE('',#4229,#15218);+#15218 = DEFINITIONAL_REPRESENTATION('',(#15219),#15223);+#15219 = LINE('',#15220,#15221);+#15220 = CARTESIAN_POINT('',(-0.395267411252,-0.165763807489));+#15221 = VECTOR('',#15222,1.);+#15222 = DIRECTION('',(0.,1.));+#15223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15224 = PCURVE('',#814,#15225);+#15225 = DEFINITIONAL_REPRESENTATION('',(#15226),#15230);+#15226 = LINE('',#15227,#15228);+#15227 = CARTESIAN_POINT('',(0.,0.));+#15228 = VECTOR('',#15229,1.);+#15229 = DIRECTION('',(1.,0.));+#15230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15231 = ORIENTED_EDGE('',*,*,#15232,.T.);+#15232 = EDGE_CURVE('',#15210,#15233,#15235,.T.);+#15233 = VERTEX_POINT('',#15234);+#15234 = CARTESIAN_POINT('',(7.446203941748E-02,1.060692661499,+    9.314404469578E-02));+#15235 = SURFACE_CURVE('',#15236,(#15240,#15247),.PCURVE_S1.);+#15236 = LINE('',#15237,#15238);+#15237 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+    9.314404469578E-02));+#15238 = VECTOR('',#15239,1.);+#15239 = DIRECTION('',(-1.,0.,0.));+#15240 = PCURVE('',#4229,#15241);+#15241 = DEFINITIONAL_REPRESENTATION('',(#15242),#15246);+#15242 = LINE('',#15243,#15244);+#15243 = CARTESIAN_POINT('',(-0.395267411252,-0.165763807489));+#15244 = VECTOR('',#15245,1.);+#15245 = DIRECTION('',(-1.,0.));+#15246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15247 = PCURVE('',#786,#15248);+#15248 = DEFINITIONAL_REPRESENTATION('',(#15249),#15253);+#15249 = LINE('',#15250,#15251);+#15250 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#15251 = VECTOR('',#15252,1.);+#15252 = DIRECTION('',(1.,0.));+#15253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15254 = ORIENTED_EDGE('',*,*,#15255,.F.);+#15255 = EDGE_CURVE('',#4913,#15233,#15256,.T.);+#15256 = SURFACE_CURVE('',#15257,(#15261,#15268),.PCURVE_S1.);+#15257 = LINE('',#15258,#15259);+#15258 = CARTESIAN_POINT('',(0.,1.025943709769,9.314404469578E-02));+#15259 = VECTOR('',#15260,1.);+#15260 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#15261 = PCURVE('',#4229,#15262);+#15262 = DEFINITIONAL_REPRESENTATION('',(#15263),#15267);+#15263 = LINE('',#15264,#15265);+#15264 = CARTESIAN_POINT('',(-0.594729450677,-0.200512759219));+#15265 = VECTOR('',#15266,1.);+#15266 = DIRECTION('',(0.906183139987,0.422885465348));+#15267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15268 = PCURVE('',#758,#15269);+#15269 = DEFINITIONAL_REPRESENTATION('',(#15270),#15274);+#15270 = LINE('',#15271,#15272);+#15271 = CARTESIAN_POINT('',(5.936554721229E-04,0.));+#15272 = VECTOR('',#15273,1.);+#15273 = DIRECTION('',(1.,0.));+#15274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15275 = ORIENTED_EDGE('',*,*,#4912,.F.);+#15276 = ORIENTED_EDGE('',*,*,#15277,.T.);+#15277 = EDGE_CURVE('',#4885,#15278,#15280,.T.);+#15278 = VERTEX_POINT('',#15279);+#15279 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+    9.314404469578E-02));+#15280 = SURFACE_CURVE('',#15281,(#15285,#15292),.PCURVE_S1.);+#15281 = LINE('',#15282,#15283);+#15282 = CARTESIAN_POINT('',(0.,0.975983918052,9.314404469578E-02));+#15283 = VECTOR('',#15284,1.);+#15284 = DIRECTION('',(1.,0.,0.));+#15285 = PCURVE('',#4229,#15286);+#15286 = DEFINITIONAL_REPRESENTATION('',(#15287),#15291);+#15287 = LINE('',#15288,#15289);+#15288 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550936));+#15289 = VECTOR('',#15290,1.);+#15290 = DIRECTION('',(1.,0.));+#15291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15292 = PCURVE('',#4900,#15293);+#15293 = DEFINITIONAL_REPRESENTATION('',(#15294),#15298);+#15294 = LINE('',#15295,#15296);+#15295 = CARTESIAN_POINT('',(5.92586848756E-02,0.1));+#15296 = VECTOR('',#15297,1.);+#15297 = DIRECTION('',(-1.,-0.));+#15298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15299 = ORIENTED_EDGE('',*,*,#15300,.T.);+#15300 = EDGE_CURVE('',#15278,#15301,#15303,.T.);+#15301 = VERTEX_POINT('',#15302);+#15302 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+    9.314404469578E-02));+#15303 = SURFACE_CURVE('',#15304,(#15308,#15315),.PCURVE_S1.);+#15304 = LINE('',#15305,#15306);+#15305 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+    9.314404469578E-02));+#15306 = VECTOR('',#15307,1.);+#15307 = DIRECTION('',(0.,-1.,0.));+#15308 = PCURVE('',#4229,#15309);+#15309 = DEFINITIONAL_REPRESENTATION('',(#15310),#15314);+#15310 = LINE('',#15311,#15312);+#15311 = CARTESIAN_POINT('',(-0.551552353506,-0.250472550936));+#15312 = VECTOR('',#15313,1.);+#15313 = DIRECTION('',(0.,-1.));+#15314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15315 = PCURVE('',#15316,#15321);+#15316 = PLANE('',#15317);+#15317 = AXIS2_PLACEMENT_3D('',#15318,#15319,#15320);+#15318 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+    0.193144044696));+#15319 = DIRECTION('',(-1.,0.,0.));+#15320 = DIRECTION('',(0.,-1.,0.));+#15321 = DEFINITIONAL_REPRESENTATION('',(#15322),#15326);+#15322 = LINE('',#15323,#15324);+#15323 = CARTESIAN_POINT('',(1.513750127434,-0.1));+#15324 = VECTOR('',#15325,1.);+#15325 = DIRECTION('',(1.,0.));+#15326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15327 = ORIENTED_EDGE('',*,*,#15328,.T.);+#15328 = EDGE_CURVE('',#15301,#4806,#15329,.T.);+#15329 = SURFACE_CURVE('',#15330,(#15334,#15341),.PCURVE_S1.);+#15330 = LINE('',#15331,#15332);+#15331 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+    9.314404469578E-02));+#15332 = VECTOR('',#15333,1.);+#15333 = DIRECTION('',(-1.,0.,0.));+#15334 = PCURVE('',#4229,#15335);+#15335 = DEFINITIONAL_REPRESENTATION('',(#15336),#15340);+#15336 = LINE('',#15337,#15338);+#15337 = CARTESIAN_POINT('',(-0.551552353506,-0.330472550938));+#15338 = VECTOR('',#15339,1.);+#15339 = DIRECTION('',(-1.,0.));+#15340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15341 = PCURVE('',#4844,#15342);+#15342 = DEFINITIONAL_REPRESENTATION('',(#15343),#15347);+#15343 = LINE('',#15344,#15345);+#15344 = CARTESIAN_POINT('',(0.118918412304,0.1));+#15345 = VECTOR('',#15346,1.);+#15346 = DIRECTION('',(-1.,0.));+#15347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15348 = ORIENTED_EDGE('',*,*,#4805,.F.);+#15349 = ORIENTED_EDGE('',*,*,#15350,.F.);+#15350 = EDGE_CURVE('',#15351,#4783,#15353,.T.);+#15351 = VERTEX_POINT('',#15352);+#15352 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,+    9.314404469578E-02));+#15353 = SURFACE_CURVE('',#15354,(#15358,#15365),.PCURVE_S1.);+#15354 = LINE('',#15355,#15356);+#15355 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,+    9.314404469578E-02));+#15356 = VECTOR('',#15357,1.);+#15357 = DIRECTION('',(-0.906183139959,0.422885465409,0.));+#15358 = PCURVE('',#4229,#15359);+#15359 = DEFINITIONAL_REPRESENTATION('',(#15360),#15364);+#15360 = LINE('',#15361,#15362);+#15361 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807486));+#15362 = VECTOR('',#15363,1.);+#15363 = DIRECTION('',(-0.906183139959,0.422885465409));+#15364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15365 = PCURVE('',#934,#15366);+#15366 = DEFINITIONAL_REPRESENTATION('',(#15367),#15371);+#15367 = LINE('',#15368,#15369);+#15368 = CARTESIAN_POINT('',(8.276472676626E-02,0.));+#15369 = VECTOR('',#15370,1.);+#15370 = DIRECTION('',(-1.,0.));+#15371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15372 = ORIENTED_EDGE('',*,*,#15373,.T.);+#15373 = EDGE_CURVE('',#15351,#15374,#15376,.T.);+#15374 = VERTEX_POINT('',#15375);+#15375 = CARTESIAN_POINT('',(0.199462039425,0.810692661502,+    9.314404469578E-02));+#15376 = SURFACE_CURVE('',#15377,(#15381,#15388),.PCURVE_S1.);+#15377 = LINE('',#15378,#15379);+#15378 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,+    9.314404469578E-02));+#15379 = VECTOR('',#15380,1.);+#15380 = DIRECTION('',(1.,0.,0.));+#15381 = PCURVE('',#4229,#15382);+#15382 = DEFINITIONAL_REPRESENTATION('',(#15383),#15387);+#15383 = LINE('',#15384,#15385);+#15384 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807486));+#15385 = VECTOR('',#15386,1.);+#15386 = DIRECTION('',(1.,0.));+#15387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15388 = PCURVE('',#906,#15389);+#15389 = DEFINITIONAL_REPRESENTATION('',(#15390),#15394);+#15390 = LINE('',#15391,#15392);+#15391 = CARTESIAN_POINT('',(-1.000588500943E-14,0.));+#15392 = VECTOR('',#15393,1.);+#15393 = DIRECTION('',(1.,0.));+#15394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15395 = ORIENTED_EDGE('',*,*,#15396,.F.);+#15396 = EDGE_CURVE('',#15397,#15374,#15399,.T.);+#15397 = VERTEX_POINT('',#15398);+#15398 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,+    9.314404469578E-02));+#15399 = SURFACE_CURVE('',#15400,(#15404,#15411),.PCURVE_S1.);+#15400 = LINE('',#15401,#15402);+#15401 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,+    9.314404469578E-02));+#15402 = VECTOR('',#15403,1.);+#15403 = DIRECTION('',(0.,1.,0.));+#15404 = PCURVE('',#4229,#15405);+#15405 = DEFINITIONAL_REPRESENTATION('',(#15406),#15410);+#15406 = LINE('',#15407,#15408);+#15407 = CARTESIAN_POINT('',(-0.395267411252,-0.665763807491));+#15408 = VECTOR('',#15409,1.);+#15409 = DIRECTION('',(0.,1.));+#15410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15411 = PCURVE('',#878,#15412);+#15412 = DEFINITIONAL_REPRESENTATION('',(#15413),#15417);+#15413 = LINE('',#15414,#15415);+#15414 = CARTESIAN_POINT('',(-1.99995575656E-12,0.));+#15415 = VECTOR('',#15416,1.);+#15416 = DIRECTION('',(1.,0.));+#15417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15418 = ORIENTED_EDGE('',*,*,#15419,.T.);+#15419 = EDGE_CURVE('',#15397,#15420,#15422,.T.);+#15420 = VERTEX_POINT('',#15421);+#15421 = CARTESIAN_POINT('',(7.446203941383E-02,0.560692661497,+    9.314404469578E-02));+#15422 = SURFACE_CURVE('',#15423,(#15427,#15434),.PCURVE_S1.);+#15423 = LINE('',#15424,#15425);+#15424 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,+    9.314404469578E-02));+#15425 = VECTOR('',#15426,1.);+#15426 = DIRECTION('',(-1.,0.,0.));+#15427 = PCURVE('',#4229,#15428);+#15428 = DEFINITIONAL_REPRESENTATION('',(#15429),#15433);+#15429 = LINE('',#15430,#15431);+#15430 = CARTESIAN_POINT('',(-0.395267411252,-0.665763807491));+#15431 = VECTOR('',#15432,1.);+#15432 = DIRECTION('',(-1.,0.));+#15433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15434 = PCURVE('',#1011,#15435);+#15435 = DEFINITIONAL_REPRESENTATION('',(#15436),#15440);+#15436 = LINE('',#15437,#15438);+#15437 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#15438 = VECTOR('',#15439,1.);+#15439 = DIRECTION('',(1.,0.));+#15440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15441 = ORIENTED_EDGE('',*,*,#15442,.F.);+#15442 = EDGE_CURVE('',#4738,#15420,#15443,.T.);+#15443 = SURFACE_CURVE('',#15444,(#15448,#15455),.PCURVE_S1.);+#15444 = LINE('',#15445,#15446);+#15445 = CARTESIAN_POINT('',(0.,0.525943709769,9.314404469578E-02));+#15446 = VECTOR('',#15447,1.);+#15447 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#15448 = PCURVE('',#4229,#15449);+#15449 = DEFINITIONAL_REPRESENTATION('',(#15450),#15454);+#15450 = LINE('',#15451,#15452);+#15451 = CARTESIAN_POINT('',(-0.594729450677,-0.700512759219));+#15452 = VECTOR('',#15453,1.);+#15453 = DIRECTION('',(0.906183139987,0.422885465348));+#15454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15455 = PCURVE('',#985,#15456);+#15456 = DEFINITIONAL_REPRESENTATION('',(#15457),#15461);+#15457 = LINE('',#15458,#15459);+#15458 = CARTESIAN_POINT('',(5.936554721235E-04,0.));+#15459 = VECTOR('',#15460,1.);+#15460 = DIRECTION('',(1.,0.));+#15461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15462 = ORIENTED_EDGE('',*,*,#4737,.F.);+#15463 = ORIENTED_EDGE('',*,*,#15464,.F.);+#15464 = EDGE_CURVE('',#15465,#4710,#15467,.T.);+#15465 = VERTEX_POINT('',#15466);+#15466 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+    9.314404469578E-02));+#15467 = SURFACE_CURVE('',#15468,(#15472,#15479),.PCURVE_S1.);+#15468 = LINE('',#15469,#15470);+#15469 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+    9.314404469578E-02));+#15470 = VECTOR('',#15471,1.);+#15471 = DIRECTION('',(-1.,0.,0.));+#15472 = PCURVE('',#4229,#15473);+#15473 = DEFINITIONAL_REPRESENTATION('',(#15474),#15478);+#15474 = LINE('',#15475,#15476);+#15475 = CARTESIAN_POINT('',(-0.551552353506,-0.750472550933));+#15476 = VECTOR('',#15477,1.);+#15477 = DIRECTION('',(-1.,0.));+#15478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15479 = PCURVE('',#4725,#15480);+#15480 = DEFINITIONAL_REPRESENTATION('',(#15481),#15485);+#15481 = LINE('',#15482,#15483);+#15482 = CARTESIAN_POINT('',(1.608158770494E-02,0.1));+#15483 = VECTOR('',#15484,1.);+#15484 = DIRECTION('',(1.,0.));+#15485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15486 = ORIENTED_EDGE('',*,*,#15487,.T.);+#15487 = EDGE_CURVE('',#15465,#15488,#15490,.T.);+#15488 = VERTEX_POINT('',#15489);+#15489 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+    9.314404469578E-02));+#15490 = SURFACE_CURVE('',#15491,(#15495,#15502),.PCURVE_S1.);+#15491 = LINE('',#15492,#15493);+#15492 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+    9.314404469578E-02));+#15493 = VECTOR('',#15494,1.);+#15494 = DIRECTION('',(0.,-1.,0.));+#15495 = PCURVE('',#4229,#15496);+#15496 = DEFINITIONAL_REPRESENTATION('',(#15497),#15501);+#15497 = LINE('',#15498,#15499);+#15498 = CARTESIAN_POINT('',(-0.551552353506,-0.750472550933));+#15499 = VECTOR('',#15500,1.);+#15500 = DIRECTION('',(0.,-1.));+#15501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15502 = PCURVE('',#15503,#15508);+#15503 = PLANE('',#15504);+#15504 = AXIS2_PLACEMENT_3D('',#15505,#15506,#15507);+#15505 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+    0.193144044696));+#15506 = DIRECTION('',(-1.,0.,0.));+#15507 = DIRECTION('',(0.,-1.,0.));+#15508 = DEFINITIONAL_REPRESENTATION('',(#15509),#15513);+#15509 = LINE('',#15510,#15511);+#15510 = CARTESIAN_POINT('',(2.013750127431,-0.1));+#15511 = VECTOR('',#15512,1.);+#15512 = DIRECTION('',(1.,0.));+#15513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15514 = ORIENTED_EDGE('',*,*,#15515,.T.);+#15515 = EDGE_CURVE('',#15488,#4631,#15516,.T.);+#15516 = SURFACE_CURVE('',#15517,(#15521,#15528),.PCURVE_S1.);+#15517 = LINE('',#15518,#15519);+#15518 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+    9.314404469578E-02));+#15519 = VECTOR('',#15520,1.);+#15520 = DIRECTION('',(-1.,0.,0.));+#15521 = PCURVE('',#4229,#15522);+#15522 = DEFINITIONAL_REPRESENTATION('',(#15523),#15527);+#15523 = LINE('',#15524,#15525);+#15524 = CARTESIAN_POINT('',(-0.551552353506,-0.830472550935));+#15525 = VECTOR('',#15526,1.);+#15526 = DIRECTION('',(-1.,0.));+#15527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15528 = PCURVE('',#4669,#15529);+#15529 = DEFINITIONAL_REPRESENTATION('',(#15530),#15534);+#15530 = LINE('',#15531,#15532);+#15531 = CARTESIAN_POINT('',(0.118918412304,0.1));+#15532 = VECTOR('',#15533,1.);+#15533 = DIRECTION('',(-1.,0.));+#15534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15535 = ADVANCED_FACE('',(#15536),#5228,.T.);+#15536 = FACE_BOUND('',#15537,.F.);+#15537 = EDGE_LOOP('',(#15538,#15539,#15562,#15583));+#15538 = ORIENTED_EDGE('',*,*,#5212,.F.);+#15539 = ORIENTED_EDGE('',*,*,#15540,.F.);+#15540 = EDGE_CURVE('',#15541,#5185,#15543,.T.);+#15541 = VERTEX_POINT('',#15542);+#15542 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+    0.193144044696));+#15543 = SURFACE_CURVE('',#15544,(#15548,#15555),.PCURVE_S1.);+#15544 = LINE('',#15545,#15546);+#15545 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+    0.193144044696));+#15546 = VECTOR('',#15547,1.);+#15547 = DIRECTION('',(-1.,0.,0.));+#15548 = PCURVE('',#5228,#15549);+#15549 = DEFINITIONAL_REPRESENTATION('',(#15550),#15554);+#15550 = LINE('',#15551,#15552);+#15551 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15552 = VECTOR('',#15553,1.);+#15553 = DIRECTION('',(1.,0.));+#15554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15555 = PCURVE('',#5200,#15556);+#15556 = DEFINITIONAL_REPRESENTATION('',(#15557),#15561);+#15557 = LINE('',#15558,#15559);+#15558 = CARTESIAN_POINT('',(-0.644586128841,0.72470739725));+#15559 = VECTOR('',#15560,1.);+#15560 = DIRECTION('',(-1.,0.));+#15561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15562 = ORIENTED_EDGE('',*,*,#15563,.T.);+#15563 = EDGE_CURVE('',#15541,#14926,#15564,.T.);+#15564 = SURFACE_CURVE('',#15565,(#15569,#15576),.PCURVE_S1.);+#15565 = LINE('',#15566,#15567);+#15566 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+    0.193144044696));+#15567 = VECTOR('',#15568,1.);+#15568 = DIRECTION('',(0.,0.,-1.));+#15569 = PCURVE('',#5228,#15570);+#15570 = DEFINITIONAL_REPRESENTATION('',(#15571),#15575);+#15571 = LINE('',#15572,#15573);+#15572 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15573 = VECTOR('',#15574,1.);+#15574 = DIRECTION('',(0.,1.));+#15575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15576 = PCURVE('',#14964,#15577);+#15577 = DEFINITIONAL_REPRESENTATION('',(#15578),#15582);+#15578 = LINE('',#15579,#15580);+#15579 = CARTESIAN_POINT('',(0.513750127434,0.));+#15580 = VECTOR('',#15581,1.);+#15581 = DIRECTION('',(0.,-1.));+#15582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15583 = ORIENTED_EDGE('',*,*,#14925,.F.);+#15584 = ADVANCED_FACE('',(#15585),#4697,.F.);+#15585 = FACE_BOUND('',#15586,.F.);+#15586 = EDGE_LOOP('',(#15587,#15588,#15611,#15634));+#15587 = ORIENTED_EDGE('',*,*,#4681,.F.);+#15588 = ORIENTED_EDGE('',*,*,#15589,.T.);+#15589 = EDGE_CURVE('',#4654,#15590,#15592,.T.);+#15590 = VERTEX_POINT('',#15591);+#15591 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+    0.193144044696));+#15592 = SURFACE_CURVE('',#15593,(#15597,#15604),.PCURVE_S1.);+#15593 = LINE('',#15594,#15595);+#15594 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#15595 = VECTOR('',#15596,1.);+#15596 = DIRECTION('',(1.,0.,0.));+#15597 = PCURVE('',#4697,#15598);+#15598 = DEFINITIONAL_REPRESENTATION('',(#15599),#15603);+#15599 = LINE('',#15600,#15601);+#15600 = CARTESIAN_POINT('',(-0.687763226012,-0.855292602749));+#15601 = VECTOR('',#15602,1.);+#15602 = DIRECTION('',(1.,0.));+#15603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15604 = PCURVE('',#4669,#15605);+#15605 = DEFINITIONAL_REPRESENTATION('',(#15606),#15610);+#15606 = LINE('',#15607,#15608);+#15607 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#15608 = VECTOR('',#15609,1.);+#15609 = DIRECTION('',(1.,0.));+#15610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15611 = ORIENTED_EDGE('',*,*,#15612,.F.);+#15612 = EDGE_CURVE('',#15613,#15590,#15615,.T.);+#15613 = VERTEX_POINT('',#15614);+#15614 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+    0.193144044696));+#15615 = SURFACE_CURVE('',#15616,(#15620,#15627),.PCURVE_S1.);+#15616 = LINE('',#15617,#15618);+#15617 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+    0.193144044696));+#15618 = VECTOR('',#15619,1.);+#15619 = DIRECTION('',(0.,-1.,0.));+#15620 = PCURVE('',#4697,#15621);+#15621 = DEFINITIONAL_REPRESENTATION('',(#15622),#15626);+#15622 = LINE('',#15623,#15624);+#15623 = CARTESIAN_POINT('',(-0.644586128841,-0.775292602747));+#15624 = VECTOR('',#15625,1.);+#15625 = DIRECTION('',(0.,-1.));+#15626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15627 = PCURVE('',#15503,#15628);+#15628 = DEFINITIONAL_REPRESENTATION('',(#15629),#15633);+#15629 = LINE('',#15630,#15631);+#15630 = CARTESIAN_POINT('',(2.013750127431,0.));+#15631 = VECTOR('',#15632,1.);+#15632 = DIRECTION('',(1.,0.));+#15633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15634 = ORIENTED_EDGE('',*,*,#15635,.T.);+#15635 = EDGE_CURVE('',#15613,#4682,#15636,.T.);+#15636 = SURFACE_CURVE('',#15637,(#15641,#15648),.PCURVE_S1.);+#15637 = LINE('',#15638,#15639);+#15638 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+    0.193144044696));+#15639 = VECTOR('',#15640,1.);+#15640 = DIRECTION('',(-1.,0.,0.));+#15641 = PCURVE('',#4697,#15642);+#15642 = DEFINITIONAL_REPRESENTATION('',(#15643),#15647);+#15643 = LINE('',#15644,#15645);+#15644 = CARTESIAN_POINT('',(-0.644586128841,-0.775292602747));+#15645 = VECTOR('',#15646,1.);+#15646 = DIRECTION('',(-1.,0.));+#15647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15648 = PCURVE('',#4725,#15649);+#15649 = DEFINITIONAL_REPRESENTATION('',(#15650),#15654);+#15650 = LINE('',#15651,#15652);+#15651 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15652 = VECTOR('',#15653,1.);+#15653 = DIRECTION('',(1.,0.));+#15654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15655 = ADVANCED_FACE('',(#15656),#4872,.F.);+#15656 = FACE_BOUND('',#15657,.F.);+#15657 = EDGE_LOOP('',(#15658,#15659,#15682,#15705));+#15658 = ORIENTED_EDGE('',*,*,#4856,.F.);+#15659 = ORIENTED_EDGE('',*,*,#15660,.T.);+#15660 = EDGE_CURVE('',#4829,#15661,#15663,.T.);+#15661 = VERTEX_POINT('',#15662);+#15662 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+    0.193144044696));+#15663 = SURFACE_CURVE('',#15664,(#15668,#15675),.PCURVE_S1.);+#15664 = LINE('',#15665,#15666);+#15665 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#15666 = VECTOR('',#15667,1.);+#15667 = DIRECTION('',(1.,0.,0.));+#15668 = PCURVE('',#4872,#15669);+#15669 = DEFINITIONAL_REPRESENTATION('',(#15670),#15674);+#15670 = LINE('',#15671,#15672);+#15671 = CARTESIAN_POINT('',(-0.687763226012,-0.355292602752));+#15672 = VECTOR('',#15673,1.);+#15673 = DIRECTION('',(1.,0.));+#15674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15675 = PCURVE('',#4844,#15676);+#15676 = DEFINITIONAL_REPRESENTATION('',(#15677),#15681);+#15677 = LINE('',#15678,#15679);+#15678 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#15679 = VECTOR('',#15680,1.);+#15680 = DIRECTION('',(1.,0.));+#15681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15682 = ORIENTED_EDGE('',*,*,#15683,.F.);+#15683 = EDGE_CURVE('',#15684,#15661,#15686,.T.);+#15684 = VERTEX_POINT('',#15685);+#15685 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+    0.193144044696));+#15686 = SURFACE_CURVE('',#15687,(#15691,#15698),.PCURVE_S1.);+#15687 = LINE('',#15688,#15689);+#15688 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+    0.193144044696));+#15689 = VECTOR('',#15690,1.);+#15690 = DIRECTION('',(0.,-1.,0.));+#15691 = PCURVE('',#4872,#15692);+#15692 = DEFINITIONAL_REPRESENTATION('',(#15693),#15697);+#15693 = LINE('',#15694,#15695);+#15694 = CARTESIAN_POINT('',(-0.644586128841,-0.27529260275));+#15695 = VECTOR('',#15696,1.);+#15696 = DIRECTION('',(0.,-1.));+#15697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15698 = PCURVE('',#15316,#15699);+#15699 = DEFINITIONAL_REPRESENTATION('',(#15700),#15704);+#15700 = LINE('',#15701,#15702);+#15701 = CARTESIAN_POINT('',(1.513750127434,0.));+#15702 = VECTOR('',#15703,1.);+#15703 = DIRECTION('',(1.,0.));+#15704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15705 = ORIENTED_EDGE('',*,*,#15706,.T.);+#15706 = EDGE_CURVE('',#15684,#4857,#15707,.T.);+#15707 = SURFACE_CURVE('',#15708,(#15712,#15719),.PCURVE_S1.);+#15708 = LINE('',#15709,#15710);+#15709 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+    0.193144044696));+#15710 = VECTOR('',#15711,1.);+#15711 = DIRECTION('',(-1.,0.,0.));+#15712 = PCURVE('',#4872,#15713);+#15713 = DEFINITIONAL_REPRESENTATION('',(#15714),#15718);+#15714 = LINE('',#15715,#15716);+#15715 = CARTESIAN_POINT('',(-0.644586128841,-0.27529260275));+#15716 = VECTOR('',#15717,1.);+#15717 = DIRECTION('',(-1.,0.));+#15718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15719 = PCURVE('',#4900,#15720);+#15720 = DEFINITIONAL_REPRESENTATION('',(#15721),#15725);+#15721 = LINE('',#15722,#15723);+#15722 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15723 = VECTOR('',#15724,1.);+#15724 = DIRECTION('',(1.,0.));+#15725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15726 = ADVANCED_FACE('',(#15727),#5047,.F.);+#15727 = FACE_BOUND('',#15728,.F.);+#15728 = EDGE_LOOP('',(#15729,#15730,#15753,#15776));+#15729 = ORIENTED_EDGE('',*,*,#5031,.F.);+#15730 = ORIENTED_EDGE('',*,*,#15731,.F.);+#15731 = EDGE_CURVE('',#15732,#5004,#15734,.T.);+#15732 = VERTEX_POINT('',#15733);+#15733 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+    0.193144044696));+#15734 = SURFACE_CURVE('',#15735,(#15739,#15746),.PCURVE_S1.);+#15735 = LINE('',#15736,#15737);+#15736 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+    0.193144044696));+#15737 = VECTOR('',#15738,1.);+#15738 = DIRECTION('',(-1.,0.,0.));+#15739 = PCURVE('',#5047,#15740);+#15740 = DEFINITIONAL_REPRESENTATION('',(#15741),#15745);+#15741 = LINE('',#15742,#15743);+#15742 = CARTESIAN_POINT('',(-0.644586128841,0.14470739725));+#15743 = VECTOR('',#15744,1.);+#15744 = DIRECTION('',(-1.,0.));+#15745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15746 = PCURVE('',#5019,#15747);+#15747 = DEFINITIONAL_REPRESENTATION('',(#15748),#15752);+#15748 = LINE('',#15749,#15750);+#15749 = CARTESIAN_POINT('',(0.118918412304,0.));+#15750 = VECTOR('',#15751,1.);+#15751 = DIRECTION('',(-1.,0.));+#15752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15753 = ORIENTED_EDGE('',*,*,#15754,.F.);+#15754 = EDGE_CURVE('',#15755,#15732,#15757,.T.);+#15755 = VERTEX_POINT('',#15756);+#15756 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+    0.193144044696));+#15757 = SURFACE_CURVE('',#15758,(#15762,#15769),.PCURVE_S1.);+#15758 = LINE('',#15759,#15760);+#15759 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+    0.193144044696));+#15760 = VECTOR('',#15761,1.);+#15761 = DIRECTION('',(0.,-1.,0.));+#15762 = PCURVE('',#5047,#15763);+#15763 = DEFINITIONAL_REPRESENTATION('',(#15764),#15768);+#15764 = LINE('',#15765,#15766);+#15765 = CARTESIAN_POINT('',(-0.644586128841,0.224707397248));+#15766 = VECTOR('',#15767,1.);+#15767 = DIRECTION('',(0.,-1.));+#15768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15769 = PCURVE('',#15129,#15770);+#15770 = DEFINITIONAL_REPRESENTATION('',(#15771),#15775);+#15771 = LINE('',#15772,#15773);+#15772 = CARTESIAN_POINT('',(1.013750127436,0.));+#15773 = VECTOR('',#15774,1.);+#15774 = DIRECTION('',(1.,0.));+#15775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15776 = ORIENTED_EDGE('',*,*,#15777,.T.);+#15777 = EDGE_CURVE('',#15755,#5032,#15778,.T.);+#15778 = SURFACE_CURVE('',#15779,(#15783,#15790),.PCURVE_S1.);+#15779 = LINE('',#15780,#15781);+#15780 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+    0.193144044696));+#15781 = VECTOR('',#15782,1.);+#15782 = DIRECTION('',(-1.,0.,0.));+#15783 = PCURVE('',#5047,#15784);+#15784 = DEFINITIONAL_REPRESENTATION('',(#15785),#15789);+#15785 = LINE('',#15786,#15787);+#15786 = CARTESIAN_POINT('',(-0.644586128841,0.224707397248));+#15787 = VECTOR('',#15788,1.);+#15788 = DIRECTION('',(-1.,0.));+#15789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15790 = PCURVE('',#5075,#15791);+#15791 = DEFINITIONAL_REPRESENTATION('',(#15792),#15796);+#15792 = LINE('',#15793,#15794);+#15793 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15794 = VECTOR('',#15795,1.);+#15795 = DIRECTION('',(1.,0.));+#15796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15797 = ADVANCED_FACE('',(#15798),#5200,.F.);+#15798 = FACE_BOUND('',#15799,.F.);+#15799 = EDGE_LOOP('',(#15800,#15801,#15824,#15845));+#15800 = ORIENTED_EDGE('',*,*,#5184,.F.);+#15801 = ORIENTED_EDGE('',*,*,#15802,.F.);+#15802 = EDGE_CURVE('',#15803,#5157,#15805,.T.);+#15803 = VERTEX_POINT('',#15804);+#15804 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+    0.193144044696));+#15805 = SURFACE_CURVE('',#15806,(#15810,#15817),.PCURVE_S1.);+#15806 = LINE('',#15807,#15808);+#15807 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+    0.193144044696));+#15808 = VECTOR('',#15809,1.);+#15809 = DIRECTION('',(-1.,0.,0.));+#15810 = PCURVE('',#5200,#15811);+#15811 = DEFINITIONAL_REPRESENTATION('',(#15812),#15816);+#15812 = LINE('',#15813,#15814);+#15813 = CARTESIAN_POINT('',(-0.644586128841,0.644707397251));+#15814 = VECTOR('',#15815,1.);+#15815 = DIRECTION('',(-1.,0.));+#15816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15817 = PCURVE('',#5172,#15818);+#15818 = DEFINITIONAL_REPRESENTATION('',(#15819),#15823);+#15819 = LINE('',#15820,#15821);+#15820 = CARTESIAN_POINT('',(0.118918412304,0.));+#15821 = VECTOR('',#15822,1.);+#15822 = DIRECTION('',(-1.,0.));+#15823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15824 = ORIENTED_EDGE('',*,*,#15825,.F.);+#15825 = EDGE_CURVE('',#15541,#15803,#15826,.T.);+#15826 = SURFACE_CURVE('',#15827,(#15831,#15838),.PCURVE_S1.);+#15827 = LINE('',#15828,#15829);+#15828 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+    0.193144044696));+#15829 = VECTOR('',#15830,1.);+#15830 = DIRECTION('',(0.,-1.,0.));+#15831 = PCURVE('',#5200,#15832);+#15832 = DEFINITIONAL_REPRESENTATION('',(#15833),#15837);+#15833 = LINE('',#15834,#15835);+#15834 = CARTESIAN_POINT('',(-0.644586128841,0.72470739725));+#15835 = VECTOR('',#15836,1.);+#15836 = DIRECTION('',(0.,-1.));+#15837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15838 = PCURVE('',#14964,#15839);+#15839 = DEFINITIONAL_REPRESENTATION('',(#15840),#15844);+#15840 = LINE('',#15841,#15842);+#15841 = CARTESIAN_POINT('',(0.513750127434,0.));+#15842 = VECTOR('',#15843,1.);+#15843 = DIRECTION('',(1.,0.));+#15844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15845 = ORIENTED_EDGE('',*,*,#15540,.T.);+#15846 = ADVANCED_FACE('',(#15847),#358,.F.);+#15847 = FACE_BOUND('',#15848,.F.);+#15848 = EDGE_LOOP('',(#15849,#15850,#15873,#15901,#15929,#15957,#15985,+    #16013));+#15849 = ORIENTED_EDGE('',*,*,#342,.T.);+#15850 = ORIENTED_EDGE('',*,*,#15851,.F.);+#15851 = EDGE_CURVE('',#15852,#315,#15854,.T.);+#15852 = VERTEX_POINT('',#15853);+#15853 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+    0.193144044696));+#15854 = SURFACE_CURVE('',#15855,(#15859,#15866),.PCURVE_S1.);+#15855 = LINE('',#15856,#15857);+#15856 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+    0.193144044696));+#15857 = VECTOR('',#15858,1.);+#15858 = DIRECTION('',(0.,-1.,0.));+#15859 = PCURVE('',#358,#15860);+#15860 = DEFINITIONAL_REPRESENTATION('',(#15861),#15865);+#15861 = LINE('',#15862,#15863);+#15862 = CARTESIAN_POINT('',(0.571698813392,-1.249244113415));+#15863 = VECTOR('',#15864,1.);+#15864 = DIRECTION('',(0.,-1.));+#15865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15866 = PCURVE('',#330,#15867);+#15867 = DEFINITIONAL_REPRESENTATION('',(#15868),#15872);+#15868 = LINE('',#15869,#15870);+#15869 = CARTESIAN_POINT('',(1.633974588913E-02,0.1));+#15870 = VECTOR('',#15871,1.);+#15871 = DIRECTION('',(-1.,0.));+#15872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15873 = ORIENTED_EDGE('',*,*,#15874,.T.);+#15874 = EDGE_CURVE('',#15852,#15875,#15877,.T.);+#15875 = VERTEX_POINT('',#15876);+#15876 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+    0.193144044696));+#15877 = SURFACE_CURVE('',#15878,(#15882,#15889),.PCURVE_S1.);+#15878 = LINE('',#15879,#15880);+#15879 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+    0.193144044696));+#15880 = VECTOR('',#15881,1.);+#15881 = DIRECTION('',(0.499999999943,0.866025403818,0.));+#15882 = PCURVE('',#358,#15883);+#15883 = DEFINITIONAL_REPRESENTATION('',(#15884),#15888);+#15884 = LINE('',#15885,#15886);+#15885 = CARTESIAN_POINT('',(0.571698813392,-1.249244113415));+#15886 = VECTOR('',#15887,1.);+#15887 = DIRECTION('',(0.499999999943,0.866025403818));+#15888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15889 = PCURVE('',#15890,#15895);+#15890 = PLANE('',#15891);+#15891 = AXIS2_PLACEMENT_3D('',#15892,#15893,#15894);+#15892 = CARTESIAN_POINT('',(1.259462039404,2.032407387132E-03,+    9.314404469578E-02));+#15893 = DIRECTION('',(0.866025403818,-0.499999999943,0.));+#15894 = DIRECTION('',(0.499999999943,0.866025403818,0.));+#15895 = DEFINITIONAL_REPRESENTATION('',(#15896),#15900);+#15896 = LINE('',#15897,#15898);+#15897 = CARTESIAN_POINT('',(-8.717956688782E-16,0.1));+#15898 = VECTOR('',#15899,1.);+#15899 = DIRECTION('',(1.,0.));+#15900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15901 = ORIENTED_EDGE('',*,*,#15902,.F.);+#15902 = EDGE_CURVE('',#15903,#15875,#15905,.T.);+#15903 = VERTEX_POINT('',#15904);+#15904 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+    0.193144044696));+#15905 = SURFACE_CURVE('',#15906,(#15910,#15917),.PCURVE_S1.);+#15906 = LINE('',#15907,#15908);+#15907 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+    0.193144044696));+#15908 = VECTOR('',#15909,1.);+#15909 = DIRECTION('',(0.,-1.,0.));+#15910 = PCURVE('',#358,#15911);+#15911 = DEFINITIONAL_REPRESENTATION('',(#15912),#15916);+#15912 = LINE('',#15913,#15914);+#15913 = CARTESIAN_POINT('',(0.6116988134,-1.11345563678));+#15914 = VECTOR('',#15915,1.);+#15915 = DIRECTION('',(0.,-1.));+#15916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15917 = PCURVE('',#15918,#15923);+#15918 = PLANE('',#15919);+#15919 = AXIS2_PLACEMENT_3D('',#15920,#15921,#15922);+#15920 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+    9.314404469578E-02));+#15921 = DIRECTION('',(1.,0.,0.));+#15922 = DIRECTION('',(-0.,1.,0.));+#15923 = DEFINITIONAL_REPRESENTATION('',(#15924),#15928);+#15924 = LINE('',#15925,#15926);+#15925 = CARTESIAN_POINT('',(6.65064443074E-02,0.1));+#15926 = VECTOR('',#15927,1.);+#15927 = DIRECTION('',(-1.,0.));+#15928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15929 = ORIENTED_EDGE('',*,*,#15930,.T.);+#15930 = EDGE_CURVE('',#15903,#15931,#15933,.T.);+#15931 = VERTEX_POINT('',#15932);+#15932 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+    0.193144044696));+#15933 = SURFACE_CURVE('',#15934,(#15938,#15945),.PCURVE_S1.);+#15934 = LINE('',#15935,#15936);+#15935 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+    0.193144044696));+#15936 = VECTOR('',#15937,1.);+#15937 = DIRECTION('',(-1.,0.,0.));+#15938 = PCURVE('',#358,#15939);+#15939 = DEFINITIONAL_REPRESENTATION('',(#15940),#15944);+#15940 = LINE('',#15941,#15942);+#15941 = CARTESIAN_POINT('',(0.6116988134,-1.11345563678));+#15942 = VECTOR('',#15943,1.);+#15943 = DIRECTION('',(-1.,0.));+#15944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15945 = PCURVE('',#15946,#15951);+#15946 = PLANE('',#15947);+#15947 = AXIS2_PLACEMENT_3D('',#15948,#15949,#15950);+#15948 = CARTESIAN_POINT('',(4.317709717066E-02,0.137820884022,+    0.193144044696));+#15949 = DIRECTION('',(0.,-1.,0.));+#15950 = DIRECTION('',(1.,0.,0.));+#15951 = DEFINITIONAL_REPRESENTATION('',(#15952),#15956);+#15952 = LINE('',#15953,#15954);+#15953 = CARTESIAN_POINT('',(1.256284942241,0.));+#15954 = VECTOR('',#15955,1.);+#15955 = DIRECTION('',(-1.,0.));+#15956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15957 = ORIENTED_EDGE('',*,*,#15958,.F.);+#15958 = EDGE_CURVE('',#15959,#15931,#15961,.T.);+#15959 = VERTEX_POINT('',#15960);+#15960 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+    0.193144044696));+#15961 = SURFACE_CURVE('',#15962,(#15966,#15973),.PCURVE_S1.);+#15962 = LINE('',#15963,#15964);+#15963 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+    0.193144044696));+#15964 = VECTOR('',#15965,1.);+#15965 = DIRECTION('',(0.,1.,0.));+#15966 = PCURVE('',#358,#15967);+#15967 = DEFINITIONAL_REPRESENTATION('',(#15968),#15972);+#15968 = LINE('',#15969,#15970);+#15969 = CARTESIAN_POINT('',(0.336698813399,-1.179962081033));+#15970 = VECTOR('',#15971,1.);+#15971 = DIRECTION('',(0.,1.));+#15972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15973 = PCURVE('',#15974,#15979);+#15974 = PLANE('',#15975);+#15975 = AXIS2_PLACEMENT_3D('',#15976,#15977,#15978);+#15976 = CARTESIAN_POINT('',(1.024462039411,0.160692661543,+    9.314404469578E-02));+#15977 = DIRECTION('',(-1.,0.,0.));+#15978 = DIRECTION('',(0.,-1.,0.));+#15979 = DEFINITIONAL_REPRESENTATION('',(#15980),#15984);+#15980 = LINE('',#15981,#15982);+#15981 = CARTESIAN_POINT('',(8.937822177383E-02,0.1));+#15982 = VECTOR('',#15983,1.);+#15983 = DIRECTION('',(-1.,0.));+#15984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#15985 = ORIENTED_EDGE('',*,*,#15986,.T.);+#15986 = EDGE_CURVE('',#15959,#15987,#15989,.T.);+#15987 = VERTEX_POINT('',#15988);+#15988 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+    0.193144044696));+#15989 = SURFACE_CURVE('',#15990,(#15994,#16001),.PCURVE_S1.);+#15990 = LINE('',#15991,#15992);+#15991 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+    0.193144044696));+#15992 = VECTOR('',#15993,1.);+#15993 = DIRECTION('',(0.500000000069,-0.866025403744,0.));+#15994 = PCURVE('',#358,#15995);+#15995 = DEFINITIONAL_REPRESENTATION('',(#15996),#16000);+#15996 = LINE('',#15997,#15998);+#15997 = CARTESIAN_POINT('',(0.336698813399,-1.179962081033));+#15998 = VECTOR('',#15999,1.);+#15999 = DIRECTION('',(0.500000000069,-0.866025403744));+#16000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16001 = PCURVE('',#16002,#16007);+#16002 = PLANE('',#16003);+#16003 = AXIS2_PLACEMENT_3D('',#16004,#16005,#16006);+#16004 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+    9.314404469578E-02));+#16005 = DIRECTION('',(-0.866025403744,-0.500000000069,0.));+#16006 = DIRECTION('',(0.500000000069,-0.866025403744,0.));+#16007 = DEFINITIONAL_REPRESENTATION('',(#16008),#16012);+#16008 = LINE('',#16009,#16010);+#16009 = CARTESIAN_POINT('',(0.,0.1));+#16010 = VECTOR('',#16011,1.);+#16011 = DIRECTION('',(1.,0.));+#16012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16013 = ORIENTED_EDGE('',*,*,#16014,.F.);+#16014 = EDGE_CURVE('',#343,#15987,#16015,.T.);+#16015 = SURFACE_CURVE('',#16016,(#16020,#16027),.PCURVE_S1.);+#16016 = LINE('',#16017,#16018);+#16017 = CARTESIAN_POINT('',(1.059462039418,0.,0.193144044696));+#16018 = VECTOR('',#16019,1.);+#16019 = DIRECTION('',(0.,1.,0.));+#16020 = PCURVE('',#358,#16021);+#16021 = DEFINITIONAL_REPRESENTATION('',(#16022),#16026);+#16022 = LINE('',#16023,#16024);+#16023 = CARTESIAN_POINT('',(0.371698813406,-1.251276520802));+#16024 = VECTOR('',#16025,1.);+#16025 = DIRECTION('',(0.,1.));+#16026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16027 = PCURVE('',#384,#16028);+#16028 = DEFINITIONAL_REPRESENTATION('',(#16029),#16033);+#16029 = LINE('',#16030,#16031);+#16030 = CARTESIAN_POINT('',(1.06926615031E-02,0.1));+#16031 = VECTOR('',#16032,1.);+#16032 = DIRECTION('',(-1.,0.));+#16033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16034 = ADVANCED_FACE('',(#16035),#4669,.T.);+#16035 = FACE_BOUND('',#16036,.F.);+#16036 = EDGE_LOOP('',(#16037,#16038,#16039,#16060));+#16037 = ORIENTED_EDGE('',*,*,#4653,.T.);+#16038 = ORIENTED_EDGE('',*,*,#15515,.F.);+#16039 = ORIENTED_EDGE('',*,*,#16040,.F.);+#16040 = EDGE_CURVE('',#15590,#15488,#16041,.T.);+#16041 = SURFACE_CURVE('',#16042,(#16046,#16053),.PCURVE_S1.);+#16042 = LINE('',#16043,#16044);+#16043 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+    0.193144044696));+#16044 = VECTOR('',#16045,1.);+#16045 = DIRECTION('',(0.,0.,-1.));+#16046 = PCURVE('',#4669,#16047);+#16047 = DEFINITIONAL_REPRESENTATION('',(#16048),#16052);+#16048 = LINE('',#16049,#16050);+#16049 = CARTESIAN_POINT('',(0.118918412304,0.));+#16050 = VECTOR('',#16051,1.);+#16051 = DIRECTION('',(0.,1.));+#16052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16053 = PCURVE('',#15503,#16054);+#16054 = DEFINITIONAL_REPRESENTATION('',(#16055),#16059);+#16055 = LINE('',#16056,#16057);+#16056 = CARTESIAN_POINT('',(2.093750127433,0.));+#16057 = VECTOR('',#16058,1.);+#16058 = DIRECTION('',(0.,-1.));+#16059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16060 = ORIENTED_EDGE('',*,*,#15589,.F.);+#16061 = ADVANCED_FACE('',(#16062),#15503,.T.);+#16062 = FACE_BOUND('',#16063,.F.);+#16063 = EDGE_LOOP('',(#16064,#16065,#16066,#16087));+#16064 = ORIENTED_EDGE('',*,*,#16040,.T.);+#16065 = ORIENTED_EDGE('',*,*,#15487,.F.);+#16066 = ORIENTED_EDGE('',*,*,#16067,.F.);+#16067 = EDGE_CURVE('',#15613,#15465,#16068,.T.);+#16068 = SURFACE_CURVE('',#16069,(#16073,#16080),.PCURVE_S1.);+#16069 = LINE('',#16070,#16071);+#16070 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+    0.193144044696));+#16071 = VECTOR('',#16072,1.);+#16072 = DIRECTION('',(0.,0.,-1.));+#16073 = PCURVE('',#15503,#16074);+#16074 = DEFINITIONAL_REPRESENTATION('',(#16075),#16079);+#16075 = LINE('',#16076,#16077);+#16076 = CARTESIAN_POINT('',(2.013750127431,0.));+#16077 = VECTOR('',#16078,1.);+#16078 = DIRECTION('',(0.,-1.));+#16079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16080 = PCURVE('',#4725,#16081);+#16081 = DEFINITIONAL_REPRESENTATION('',(#16082),#16086);+#16082 = LINE('',#16083,#16084);+#16083 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#16084 = VECTOR('',#16085,1.);+#16085 = DIRECTION('',(0.,1.));+#16086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16087 = ORIENTED_EDGE('',*,*,#15612,.T.);+#16088 = ADVANCED_FACE('',(#16089),#15129,.T.);+#16089 = FACE_BOUND('',#16090,.F.);+#16090 = EDGE_LOOP('',(#16091,#16112,#16113,#16134));+#16091 = ORIENTED_EDGE('',*,*,#16092,.T.);+#16092 = EDGE_CURVE('',#15732,#15114,#16093,.T.);+#16093 = SURFACE_CURVE('',#16094,(#16098,#16105),.PCURVE_S1.);+#16094 = LINE('',#16095,#16096);+#16095 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+    0.193144044696));+#16096 = VECTOR('',#16097,1.);+#16097 = DIRECTION('',(0.,0.,-1.));+#16098 = PCURVE('',#15129,#16099);+#16099 = DEFINITIONAL_REPRESENTATION('',(#16100),#16104);+#16100 = LINE('',#16101,#16102);+#16101 = CARTESIAN_POINT('',(1.093750127434,0.));+#16102 = VECTOR('',#16103,1.);+#16103 = DIRECTION('',(0.,-1.));+#16104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16105 = PCURVE('',#5019,#16106);+#16106 = DEFINITIONAL_REPRESENTATION('',(#16107),#16111);+#16107 = LINE('',#16108,#16109);+#16108 = CARTESIAN_POINT('',(0.118918412304,0.));+#16109 = VECTOR('',#16110,1.);+#16110 = DIRECTION('',(0.,1.));+#16111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16112 = ORIENTED_EDGE('',*,*,#15113,.F.);+#16113 = ORIENTED_EDGE('',*,*,#16114,.F.);+#16114 = EDGE_CURVE('',#15755,#15091,#16115,.T.);+#16115 = SURFACE_CURVE('',#16116,(#16120,#16127),.PCURVE_S1.);+#16116 = LINE('',#16117,#16118);+#16117 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+    0.193144044696));+#16118 = VECTOR('',#16119,1.);+#16119 = DIRECTION('',(0.,0.,-1.));+#16120 = PCURVE('',#15129,#16121);+#16121 = DEFINITIONAL_REPRESENTATION('',(#16122),#16126);+#16122 = LINE('',#16123,#16124);+#16123 = CARTESIAN_POINT('',(1.013750127436,0.));+#16124 = VECTOR('',#16125,1.);+#16125 = DIRECTION('',(0.,-1.));+#16126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16127 = PCURVE('',#5075,#16128);+#16128 = DEFINITIONAL_REPRESENTATION('',(#16129),#16133);+#16129 = LINE('',#16130,#16131);+#16130 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#16131 = VECTOR('',#16132,1.);+#16132 = DIRECTION('',(0.,1.));+#16133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16134 = ORIENTED_EDGE('',*,*,#15754,.T.);+#16135 = ADVANCED_FACE('',(#16136),#14964,.T.);+#16136 = FACE_BOUND('',#16137,.F.);+#16137 = EDGE_LOOP('',(#16138,#16139,#16140,#16161));+#16138 = ORIENTED_EDGE('',*,*,#15563,.F.);+#16139 = ORIENTED_EDGE('',*,*,#15825,.T.);+#16140 = ORIENTED_EDGE('',*,*,#16141,.T.);+#16141 = EDGE_CURVE('',#15803,#14949,#16142,.T.);+#16142 = SURFACE_CURVE('',#16143,(#16147,#16154),.PCURVE_S1.);+#16143 = LINE('',#16144,#16145);+#16144 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+    0.193144044696));+#16145 = VECTOR('',#16146,1.);+#16146 = DIRECTION('',(0.,0.,-1.));+#16147 = PCURVE('',#14964,#16148);+#16148 = DEFINITIONAL_REPRESENTATION('',(#16149),#16153);+#16149 = LINE('',#16150,#16151);+#16150 = CARTESIAN_POINT('',(0.593750127433,0.));+#16151 = VECTOR('',#16152,1.);+#16152 = DIRECTION('',(0.,-1.));+#16153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16154 = PCURVE('',#5172,#16155);+#16155 = DEFINITIONAL_REPRESENTATION('',(#16156),#16160);+#16156 = LINE('',#16157,#16158);+#16157 = CARTESIAN_POINT('',(0.118918412304,0.));+#16158 = VECTOR('',#16159,1.);+#16159 = DIRECTION('',(0.,1.));+#16160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16161 = ORIENTED_EDGE('',*,*,#14948,.F.);+#16162 = ADVANCED_FACE('',(#16163),#15316,.T.);+#16163 = FACE_BOUND('',#16164,.F.);+#16164 = EDGE_LOOP('',(#16165,#16186,#16187,#16208));+#16165 = ORIENTED_EDGE('',*,*,#16166,.F.);+#16166 = EDGE_CURVE('',#15684,#15278,#16167,.T.);+#16167 = SURFACE_CURVE('',#16168,(#16172,#16179),.PCURVE_S1.);+#16168 = LINE('',#16169,#16170);+#16169 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+    0.193144044696));+#16170 = VECTOR('',#16171,1.);+#16171 = DIRECTION('',(0.,0.,-1.));+#16172 = PCURVE('',#15316,#16173);+#16173 = DEFINITIONAL_REPRESENTATION('',(#16174),#16178);+#16174 = LINE('',#16175,#16176);+#16175 = CARTESIAN_POINT('',(1.513750127434,0.));+#16176 = VECTOR('',#16177,1.);+#16177 = DIRECTION('',(0.,-1.));+#16178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16179 = PCURVE('',#4900,#16180);+#16180 = DEFINITIONAL_REPRESENTATION('',(#16181),#16185);+#16181 = LINE('',#16182,#16183);+#16182 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#16183 = VECTOR('',#16184,1.);+#16184 = DIRECTION('',(0.,1.));+#16185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16186 = ORIENTED_EDGE('',*,*,#15683,.T.);+#16187 = ORIENTED_EDGE('',*,*,#16188,.T.);+#16188 = EDGE_CURVE('',#15661,#15301,#16189,.T.);+#16189 = SURFACE_CURVE('',#16190,(#16194,#16201),.PCURVE_S1.);+#16190 = LINE('',#16191,#16192);+#16191 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+    0.193144044696));+#16192 = VECTOR('',#16193,1.);+#16193 = DIRECTION('',(0.,0.,-1.));+#16194 = PCURVE('',#15316,#16195);+#16195 = DEFINITIONAL_REPRESENTATION('',(#16196),#16200);+#16196 = LINE('',#16197,#16198);+#16197 = CARTESIAN_POINT('',(1.593750127436,0.));+#16198 = VECTOR('',#16199,1.);+#16199 = DIRECTION('',(0.,-1.));+#16200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16201 = PCURVE('',#4844,#16202);+#16202 = DEFINITIONAL_REPRESENTATION('',(#16203),#16207);+#16203 = LINE('',#16204,#16205);+#16204 = CARTESIAN_POINT('',(0.118918412304,0.));+#16205 = VECTOR('',#16206,1.);+#16206 = DIRECTION('',(0.,1.));+#16207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16208 = ORIENTED_EDGE('',*,*,#15300,.F.);+#16209 = ADVANCED_FACE('',(#16210),#4725,.T.);+#16210 = FACE_BOUND('',#16211,.F.);+#16211 = EDGE_LOOP('',(#16212,#16213,#16214,#16215));+#16212 = ORIENTED_EDGE('',*,*,#4709,.F.);+#16213 = ORIENTED_EDGE('',*,*,#15635,.F.);+#16214 = ORIENTED_EDGE('',*,*,#16067,.T.);+#16215 = ORIENTED_EDGE('',*,*,#15464,.T.);+#16216 = ADVANCED_FACE('',(#16217),#5019,.T.);+#16217 = FACE_BOUND('',#16218,.F.);+#16218 = EDGE_LOOP('',(#16219,#16220,#16221,#16222));+#16219 = ORIENTED_EDGE('',*,*,#5003,.T.);+#16220 = ORIENTED_EDGE('',*,*,#15141,.F.);+#16221 = ORIENTED_EDGE('',*,*,#16092,.F.);+#16222 = ORIENTED_EDGE('',*,*,#15731,.T.);+#16223 = ADVANCED_FACE('',(#16224),#5075,.T.);+#16224 = FACE_BOUND('',#16225,.F.);+#16225 = EDGE_LOOP('',(#16226,#16227,#16228,#16229));+#16226 = ORIENTED_EDGE('',*,*,#5059,.F.);+#16227 = ORIENTED_EDGE('',*,*,#15777,.F.);+#16228 = ORIENTED_EDGE('',*,*,#16114,.T.);+#16229 = ORIENTED_EDGE('',*,*,#15090,.F.);+#16230 = ADVANCED_FACE('',(#16231),#5172,.T.);+#16231 = FACE_BOUND('',#16232,.F.);+#16232 = EDGE_LOOP('',(#16233,#16234,#16235,#16236));+#16233 = ORIENTED_EDGE('',*,*,#5156,.T.);+#16234 = ORIENTED_EDGE('',*,*,#14976,.F.);+#16235 = ORIENTED_EDGE('',*,*,#16141,.F.);+#16236 = ORIENTED_EDGE('',*,*,#15802,.T.);+#16237 = ADVANCED_FACE('',(#16238),#4900,.T.);+#16238 = FACE_BOUND('',#16239,.F.);+#16239 = EDGE_LOOP('',(#16240,#16241,#16242,#16243));+#16240 = ORIENTED_EDGE('',*,*,#4884,.F.);+#16241 = ORIENTED_EDGE('',*,*,#15706,.F.);+#16242 = ORIENTED_EDGE('',*,*,#16166,.T.);+#16243 = ORIENTED_EDGE('',*,*,#15277,.F.);+#16244 = ADVANCED_FACE('',(#16245),#4844,.T.);+#16245 = FACE_BOUND('',#16246,.F.);+#16246 = EDGE_LOOP('',(#16247,#16248,#16249,#16250));+#16247 = ORIENTED_EDGE('',*,*,#4828,.T.);+#16248 = ORIENTED_EDGE('',*,*,#15328,.F.);+#16249 = ORIENTED_EDGE('',*,*,#16188,.F.);+#16250 = ORIENTED_EDGE('',*,*,#15660,.F.);+#16251 = ADVANCED_FACE('',(#16252),#330,.F.);+#16252 = FACE_BOUND('',#16253,.F.);+#16253 = EDGE_LOOP('',(#16254,#16255,#16278,#16299));+#16254 = ORIENTED_EDGE('',*,*,#314,.F.);+#16255 = ORIENTED_EDGE('',*,*,#16256,.T.);+#16256 = EDGE_CURVE('',#287,#16257,#16259,.T.);+#16257 = VERTEX_POINT('',#16258);+#16258 = CARTESIAN_POINT('',(1.259462039404,2.032407387132E-03,+    9.314404469578E-02));+#16259 = SURFACE_CURVE('',#16260,(#16264,#16271),.PCURVE_S1.);+#16260 = LINE('',#16261,#16262);+#16261 = CARTESIAN_POINT('',(1.259462039404,0.,9.314404469578E-02));+#16262 = VECTOR('',#16263,1.);+#16263 = DIRECTION('',(0.,1.,0.));+#16264 = PCURVE('',#330,#16265);+#16265 = DEFINITIONAL_REPRESENTATION('',(#16266),#16270);+#16266 = LINE('',#16267,#16268);+#16267 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#16268 = VECTOR('',#16269,1.);+#16269 = DIRECTION('',(1.,0.));+#16270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16271 = PCURVE('',#302,#16272);+#16272 = DEFINITIONAL_REPRESENTATION('',(#16273),#16277);+#16273 = LINE('',#16274,#16275);+#16274 = CARTESIAN_POINT('',(0.571698813392,-1.251276520802));+#16275 = VECTOR('',#16276,1.);+#16276 = DIRECTION('',(0.,1.));+#16277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16278 = ORIENTED_EDGE('',*,*,#16279,.F.);+#16279 = EDGE_CURVE('',#15852,#16257,#16280,.T.);+#16280 = SURFACE_CURVE('',#16281,(#16285,#16292),.PCURVE_S1.);+#16281 = LINE('',#16282,#16283);+#16282 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+    0.193144044696));+#16283 = VECTOR('',#16284,1.);+#16284 = DIRECTION('',(0.,0.,-1.));+#16285 = PCURVE('',#330,#16286);+#16286 = DEFINITIONAL_REPRESENTATION('',(#16287),#16291);+#16287 = LINE('',#16288,#16289);+#16288 = CARTESIAN_POINT('',(1.633974588913E-02,0.1));+#16289 = VECTOR('',#16290,1.);+#16290 = DIRECTION('',(0.,-1.));+#16291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16292 = PCURVE('',#15890,#16293);+#16293 = DEFINITIONAL_REPRESENTATION('',(#16294),#16298);+#16294 = LINE('',#16295,#16296);+#16295 = CARTESIAN_POINT('',(-8.717956688782E-16,0.1));+#16296 = VECTOR('',#16297,1.);+#16297 = DIRECTION('',(0.,-1.));+#16298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16299 = ORIENTED_EDGE('',*,*,#15851,.T.);+#16300 = ADVANCED_FACE('',(#16301),#302,.T.);+#16301 = FACE_BOUND('',#16302,.F.);+#16302 = EDGE_LOOP('',(#16303,#16304,#16327,#16350,#16373,#16396,#16419,+    #16440));+#16303 = ORIENTED_EDGE('',*,*,#284,.F.);+#16304 = ORIENTED_EDGE('',*,*,#16305,.F.);+#16305 = EDGE_CURVE('',#16306,#285,#16308,.T.);+#16306 = VERTEX_POINT('',#16307);+#16307 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+    9.314404469578E-02));+#16308 = SURFACE_CURVE('',#16309,(#16313,#16320),.PCURVE_S1.);+#16309 = LINE('',#16310,#16311);+#16310 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+    9.314404469578E-02));+#16311 = VECTOR('',#16312,1.);+#16312 = DIRECTION('',(0.,-1.,0.));+#16313 = PCURVE('',#302,#16314);+#16314 = DEFINITIONAL_REPRESENTATION('',(#16315),#16319);+#16315 = LINE('',#16316,#16317);+#16316 = CARTESIAN_POINT('',(0.371698813406,-1.240583859299));+#16317 = VECTOR('',#16318,1.);+#16318 = DIRECTION('',(0.,-1.));+#16319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16320 = PCURVE('',#384,#16321);+#16321 = DEFINITIONAL_REPRESENTATION('',(#16322),#16326);+#16322 = LINE('',#16323,#16324);+#16323 = CARTESIAN_POINT('',(0.,0.));+#16324 = VECTOR('',#16325,1.);+#16325 = DIRECTION('',(1.,0.));+#16326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16327 = ORIENTED_EDGE('',*,*,#16328,.T.);+#16328 = EDGE_CURVE('',#16306,#16329,#16331,.T.);+#16329 = VERTEX_POINT('',#16330);+#16330 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+    9.314404469578E-02));+#16331 = SURFACE_CURVE('',#16332,(#16336,#16343),.PCURVE_S1.);+#16332 = LINE('',#16333,#16334);+#16333 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+    9.314404469578E-02));+#16334 = VECTOR('',#16335,1.);+#16335 = DIRECTION('',(-0.500000000069,0.866025403744,0.));+#16336 = PCURVE('',#302,#16337);+#16337 = DEFINITIONAL_REPRESENTATION('',(#16338),#16342);+#16338 = LINE('',#16339,#16340);+#16339 = CARTESIAN_POINT('',(0.371698813406,-1.240583859299));+#16340 = VECTOR('',#16341,1.);+#16341 = DIRECTION('',(-0.500000000069,0.866025403744));+#16342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16343 = PCURVE('',#16002,#16344);+#16344 = DEFINITIONAL_REPRESENTATION('',(#16345),#16349);+#16345 = LINE('',#16346,#16347);+#16346 = CARTESIAN_POINT('',(7.00000000045E-02,0.));+#16347 = VECTOR('',#16348,1.);+#16348 = DIRECTION('',(-1.,0.));+#16349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16350 = ORIENTED_EDGE('',*,*,#16351,.F.);+#16351 = EDGE_CURVE('',#16352,#16329,#16354,.T.);+#16352 = VERTEX_POINT('',#16353);+#16353 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+    9.314404469578E-02));+#16354 = SURFACE_CURVE('',#16355,(#16359,#16366),.PCURVE_S1.);+#16355 = LINE('',#16356,#16357);+#16356 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+    9.314404469578E-02));+#16357 = VECTOR('',#16358,1.);+#16358 = DIRECTION('',(0.,-1.,0.));+#16359 = PCURVE('',#302,#16360);+#16360 = DEFINITIONAL_REPRESENTATION('',(#16361),#16365);+#16361 = LINE('',#16362,#16363);+#16362 = CARTESIAN_POINT('',(0.336698813399,-1.11345563678));+#16363 = VECTOR('',#16364,1.);+#16364 = DIRECTION('',(0.,-1.));+#16365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16366 = PCURVE('',#15974,#16367);+#16367 = DEFINITIONAL_REPRESENTATION('',(#16368),#16372);+#16368 = LINE('',#16369,#16370);+#16369 = CARTESIAN_POINT('',(2.2871777521E-02,0.));+#16370 = VECTOR('',#16371,1.);+#16371 = DIRECTION('',(1.,0.));+#16372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16373 = ORIENTED_EDGE('',*,*,#16374,.T.);+#16374 = EDGE_CURVE('',#16352,#16375,#16377,.T.);+#16375 = VERTEX_POINT('',#16376);+#16376 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+    9.314404469578E-02));+#16377 = SURFACE_CURVE('',#16378,(#16382,#16389),.PCURVE_S1.);+#16378 = LINE('',#16379,#16380);+#16379 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+    9.314404469578E-02));+#16380 = VECTOR('',#16381,1.);+#16381 = DIRECTION('',(1.,0.,0.));+#16382 = PCURVE('',#302,#16383);+#16383 = DEFINITIONAL_REPRESENTATION('',(#16384),#16388);+#16384 = LINE('',#16385,#16386);+#16385 = CARTESIAN_POINT('',(0.336698813399,-1.11345563678));+#16386 = VECTOR('',#16387,1.);+#16387 = DIRECTION('',(1.,0.));+#16388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16389 = PCURVE('',#15946,#16390);+#16390 = DEFINITIONAL_REPRESENTATION('',(#16391),#16395);+#16391 = LINE('',#16392,#16393);+#16392 = CARTESIAN_POINT('',(0.98128494224,-0.1));+#16393 = VECTOR('',#16394,1.);+#16394 = DIRECTION('',(1.,0.));+#16395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16396 = ORIENTED_EDGE('',*,*,#16397,.F.);+#16397 = EDGE_CURVE('',#16398,#16375,#16400,.T.);+#16398 = VERTEX_POINT('',#16399);+#16399 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+    9.314404469578E-02));+#16400 = SURFACE_CURVE('',#16401,(#16405,#16412),.PCURVE_S1.);+#16401 = LINE('',#16402,#16403);+#16402 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+    9.314404469578E-02));+#16403 = VECTOR('',#16404,1.);+#16404 = DIRECTION('',(0.,1.,0.));+#16405 = PCURVE('',#302,#16406);+#16406 = DEFINITIONAL_REPRESENTATION('',(#16407),#16411);+#16407 = LINE('',#16408,#16409);+#16408 = CARTESIAN_POINT('',(0.6116988134,-1.179962081087));+#16409 = VECTOR('',#16410,1.);+#16410 = DIRECTION('',(0.,1.));+#16411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16412 = PCURVE('',#15918,#16413);+#16413 = DEFINITIONAL_REPRESENTATION('',(#16414),#16418);+#16414 = LINE('',#16415,#16416);+#16415 = CARTESIAN_POINT('',(0.,0.));+#16416 = VECTOR('',#16417,1.);+#16417 = DIRECTION('',(1.,0.));+#16418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16419 = ORIENTED_EDGE('',*,*,#16420,.T.);+#16420 = EDGE_CURVE('',#16398,#16257,#16421,.T.);+#16421 = SURFACE_CURVE('',#16422,(#16426,#16433),.PCURVE_S1.);+#16422 = LINE('',#16423,#16424);+#16423 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+    9.314404469578E-02));+#16424 = VECTOR('',#16425,1.);+#16425 = DIRECTION('',(-0.499999999943,-0.866025403818,0.));+#16426 = PCURVE('',#302,#16427);+#16427 = DEFINITIONAL_REPRESENTATION('',(#16428),#16432);+#16428 = LINE('',#16429,#16430);+#16429 = CARTESIAN_POINT('',(0.6116988134,-1.179962081087));+#16430 = VECTOR('',#16431,1.);+#16431 = DIRECTION('',(-0.499999999943,-0.866025403818));+#16432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16433 = PCURVE('',#15890,#16434);+#16434 = DEFINITIONAL_REPRESENTATION('',(#16435),#16439);+#16435 = LINE('',#16436,#16437);+#16436 = CARTESIAN_POINT('',(8.00000000254E-02,0.));+#16437 = VECTOR('',#16438,1.);+#16438 = DIRECTION('',(-1.,0.));+#16439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16440 = ORIENTED_EDGE('',*,*,#16256,.F.);+#16441 = ADVANCED_FACE('',(#16442),#384,.F.);+#16442 = FACE_BOUND('',#16443,.F.);+#16443 = EDGE_LOOP('',(#16444,#16445,#16446,#16467));+#16444 = ORIENTED_EDGE('',*,*,#370,.T.);+#16445 = ORIENTED_EDGE('',*,*,#16014,.T.);+#16446 = ORIENTED_EDGE('',*,*,#16447,.T.);+#16447 = EDGE_CURVE('',#15987,#16306,#16448,.T.);+#16448 = SURFACE_CURVE('',#16449,(#16453,#16460),.PCURVE_S1.);+#16449 = LINE('',#16450,#16451);+#16450 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+    0.193144044696));+#16451 = VECTOR('',#16452,1.);+#16452 = DIRECTION('',(0.,0.,-1.));+#16453 = PCURVE('',#384,#16454);+#16454 = DEFINITIONAL_REPRESENTATION('',(#16455),#16459);+#16455 = LINE('',#16456,#16457);+#16456 = CARTESIAN_POINT('',(0.,0.1));+#16457 = VECTOR('',#16458,1.);+#16458 = DIRECTION('',(0.,-1.));+#16459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16460 = PCURVE('',#16002,#16461);+#16461 = DEFINITIONAL_REPRESENTATION('',(#16462),#16466);+#16462 = LINE('',#16463,#16464);+#16463 = CARTESIAN_POINT('',(7.00000000045E-02,0.1));+#16464 = VECTOR('',#16465,1.);+#16465 = DIRECTION('',(0.,-1.));+#16466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16467 = ORIENTED_EDGE('',*,*,#16305,.T.);+#16468 = ADVANCED_FACE('',(#16469),#16002,.F.);+#16469 = FACE_BOUND('',#16470,.F.);+#16470 = EDGE_LOOP('',(#16471,#16472,#16473,#16474));+#16471 = ORIENTED_EDGE('',*,*,#16328,.F.);+#16472 = ORIENTED_EDGE('',*,*,#16447,.F.);+#16473 = ORIENTED_EDGE('',*,*,#15986,.F.);+#16474 = ORIENTED_EDGE('',*,*,#16475,.T.);+#16475 = EDGE_CURVE('',#15959,#16329,#16476,.T.);+#16476 = SURFACE_CURVE('',#16477,(#16481,#16488),.PCURVE_S1.);+#16477 = LINE('',#16478,#16479);+#16478 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+    0.193144044696));+#16479 = VECTOR('',#16480,1.);+#16480 = DIRECTION('',(0.,0.,-1.));+#16481 = PCURVE('',#16002,#16482);+#16482 = DEFINITIONAL_REPRESENTATION('',(#16483),#16487);+#16483 = LINE('',#16484,#16485);+#16484 = CARTESIAN_POINT('',(0.,0.1));+#16485 = VECTOR('',#16486,1.);+#16486 = DIRECTION('',(0.,-1.));+#16487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16488 = PCURVE('',#15974,#16489);+#16489 = DEFINITIONAL_REPRESENTATION('',(#16490),#16494);+#16490 = LINE('',#16491,#16492);+#16491 = CARTESIAN_POINT('',(8.937822177383E-02,0.1));+#16492 = VECTOR('',#16493,1.);+#16493 = DIRECTION('',(0.,-1.));+#16494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16495 = ADVANCED_FACE('',(#16496),#15974,.F.);+#16496 = FACE_BOUND('',#16497,.F.);+#16497 = EDGE_LOOP('',(#16498,#16519,#16520,#16521));+#16498 = ORIENTED_EDGE('',*,*,#16499,.F.);+#16499 = EDGE_CURVE('',#16352,#15931,#16500,.T.);+#16500 = SURFACE_CURVE('',#16501,(#16505,#16512),.PCURVE_S1.);+#16501 = LINE('',#16502,#16503);+#16502 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+    9.314404469578E-02));+#16503 = VECTOR('',#16504,1.);+#16504 = DIRECTION('',(0.,0.,1.));+#16505 = PCURVE('',#15974,#16506);+#16506 = DEFINITIONAL_REPRESENTATION('',(#16507),#16511);+#16507 = LINE('',#16508,#16509);+#16508 = CARTESIAN_POINT('',(2.2871777521E-02,0.));+#16509 = VECTOR('',#16510,1.);+#16510 = DIRECTION('',(0.,1.));+#16511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16512 = PCURVE('',#15946,#16513);+#16513 = DEFINITIONAL_REPRESENTATION('',(#16514),#16518);+#16514 = LINE('',#16515,#16516);+#16515 = CARTESIAN_POINT('',(0.98128494224,-0.1));+#16516 = VECTOR('',#16517,1.);+#16517 = DIRECTION('',(0.,1.));+#16518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16519 = ORIENTED_EDGE('',*,*,#16351,.T.);+#16520 = ORIENTED_EDGE('',*,*,#16475,.F.);+#16521 = ORIENTED_EDGE('',*,*,#15958,.T.);+#16522 = ADVANCED_FACE('',(#16523),#15946,.T.);+#16523 = FACE_BOUND('',#16524,.F.);+#16524 = EDGE_LOOP('',(#16525,#16526,#16527,#16528));+#16525 = ORIENTED_EDGE('',*,*,#16374,.F.);+#16526 = ORIENTED_EDGE('',*,*,#16499,.T.);+#16527 = ORIENTED_EDGE('',*,*,#15930,.F.);+#16528 = ORIENTED_EDGE('',*,*,#16529,.F.);+#16529 = EDGE_CURVE('',#16375,#15903,#16530,.T.);+#16530 = SURFACE_CURVE('',#16531,(#16535,#16542),.PCURVE_S1.);+#16531 = LINE('',#16532,#16533);+#16532 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+    9.314404469578E-02));+#16533 = VECTOR('',#16534,1.);+#16534 = DIRECTION('',(0.,0.,1.));+#16535 = PCURVE('',#15946,#16536);+#16536 = DEFINITIONAL_REPRESENTATION('',(#16537),#16541);+#16537 = LINE('',#16538,#16539);+#16538 = CARTESIAN_POINT('',(1.256284942241,-0.1));+#16539 = VECTOR('',#16540,1.);+#16540 = DIRECTION('',(0.,1.));+#16541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16542 = PCURVE('',#15918,#16543);+#16543 = DEFINITIONAL_REPRESENTATION('',(#16544),#16548);+#16544 = LINE('',#16545,#16546);+#16545 = CARTESIAN_POINT('',(6.65064443074E-02,0.));+#16546 = VECTOR('',#16547,1.);+#16547 = DIRECTION('',(0.,1.));+#16548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16549 = ADVANCED_FACE('',(#16550),#15918,.F.);+#16550 = FACE_BOUND('',#16551,.F.);+#16551 = EDGE_LOOP('',(#16552,#16553,#16554,#16575));+#16552 = ORIENTED_EDGE('',*,*,#16529,.T.);+#16553 = ORIENTED_EDGE('',*,*,#15902,.T.);+#16554 = ORIENTED_EDGE('',*,*,#16555,.T.);+#16555 = EDGE_CURVE('',#15875,#16398,#16556,.T.);+#16556 = SURFACE_CURVE('',#16557,(#16561,#16568),.PCURVE_S1.);+#16557 = LINE('',#16558,#16559);+#16558 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+    0.193144044696));+#16559 = VECTOR('',#16560,1.);+#16560 = DIRECTION('',(0.,0.,-1.));+#16561 = PCURVE('',#15918,#16562);+#16562 = DEFINITIONAL_REPRESENTATION('',(#16563),#16567);+#16563 = LINE('',#16564,#16565);+#16564 = CARTESIAN_POINT('',(0.,0.1));+#16565 = VECTOR('',#16566,1.);+#16566 = DIRECTION('',(0.,-1.));+#16567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16568 = PCURVE('',#15890,#16569);+#16569 = DEFINITIONAL_REPRESENTATION('',(#16570),#16574);+#16570 = LINE('',#16571,#16572);+#16571 = CARTESIAN_POINT('',(8.00000000254E-02,0.1));+#16572 = VECTOR('',#16573,1.);+#16573 = DIRECTION('',(0.,-1.));+#16574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16575 = ORIENTED_EDGE('',*,*,#16397,.T.);+#16576 = ADVANCED_FACE('',(#16577),#15890,.F.);+#16577 = FACE_BOUND('',#16578,.F.);+#16578 = EDGE_LOOP('',(#16579,#16580,#16581,#16582));+#16579 = ORIENTED_EDGE('',*,*,#16420,.F.);+#16580 = ORIENTED_EDGE('',*,*,#16555,.F.);+#16581 = ORIENTED_EDGE('',*,*,#15874,.F.);+#16582 = ORIENTED_EDGE('',*,*,#16279,.T.);+#16583 = ADVANCED_FACE('',(#16584),#669,.F.);+#16584 = FACE_BOUND('',#16585,.F.);+#16585 = EDGE_LOOP('',(#16586,#16587,#16608,#16609));+#16586 = ORIENTED_EDGE('',*,*,#655,.T.);+#16587 = ORIENTED_EDGE('',*,*,#16588,.T.);+#16588 = EDGE_CURVE('',#628,#15000,#16589,.T.);+#16589 = SURFACE_CURVE('',#16590,(#16594,#16601),.PCURVE_S1.);+#16590 = LINE('',#16591,#16592);+#16591 = CARTESIAN_POINT('',(0.199462039425,1.810692661497,0.));+#16592 = VECTOR('',#16593,1.);+#16593 = DIRECTION('',(0.,0.,1.));+#16594 = PCURVE('',#669,#16595);+#16595 = DEFINITIONAL_REPRESENTATION('',(#16596),#16600);+#16596 = LINE('',#16597,#16598);+#16597 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#16598 = VECTOR('',#16599,1.);+#16599 = DIRECTION('',(0.,1.));+#16600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16601 = PCURVE('',#643,#16602);+#16602 = DEFINITIONAL_REPRESENTATION('',(#16603),#16607);+#16603 = LINE('',#16604,#16605);+#16604 = CARTESIAN_POINT('',(0.249999999999,9.314404469578E-02));+#16605 = VECTOR('',#16606,1.);+#16606 = DIRECTION('',(0.,-1.));+#16607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16608 = ORIENTED_EDGE('',*,*,#14999,.F.);+#16609 = ORIENTED_EDGE('',*,*,#4192,.T.);+#16610 = ADVANCED_FACE('',(#16611),#643,.F.);+#16611 = FACE_BOUND('',#16612,.F.);+#16612 = EDGE_LOOP('',(#16613,#16614,#16635,#16636));+#16613 = ORIENTED_EDGE('',*,*,#627,.F.);+#16614 = ORIENTED_EDGE('',*,*,#16615,.T.);+#16615 = EDGE_CURVE('',#600,#15023,#16616,.T.);+#16616 = SURFACE_CURVE('',#16617,(#16621,#16628),.PCURVE_S1.);+#16617 = LINE('',#16618,#16619);+#16618 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#16619 = VECTOR('',#16620,1.);+#16620 = DIRECTION('',(0.,0.,1.));+#16621 = PCURVE('',#643,#16622);+#16622 = DEFINITIONAL_REPRESENTATION('',(#16623),#16627);+#16623 = LINE('',#16624,#16625);+#16624 = CARTESIAN_POINT('',(3.000044657142E-12,9.314404469578E-02));+#16625 = VECTOR('',#16626,1.);+#16626 = DIRECTION('',(0.,-1.));+#16627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16628 = PCURVE('',#615,#16629);+#16629 = DEFINITIONAL_REPRESENTATION('',(#16630),#16634);+#16630 = LINE('',#16631,#16632);+#16631 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#16632 = VECTOR('',#16633,1.);+#16633 = DIRECTION('',(0.,1.));+#16634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16635 = ORIENTED_EDGE('',*,*,#15022,.T.);+#16636 = ORIENTED_EDGE('',*,*,#16588,.F.);+#16637 = ADVANCED_FACE('',(#16638),#615,.F.);+#16638 = FACE_BOUND('',#16639,.F.);+#16639 = EDGE_LOOP('',(#16640,#16641,#16662,#16663));+#16640 = ORIENTED_EDGE('',*,*,#599,.T.);+#16641 = ORIENTED_EDGE('',*,*,#16642,.T.);+#16642 = EDGE_CURVE('',#572,#15046,#16643,.T.);+#16643 = SURFACE_CURVE('',#16644,(#16648,#16655),.PCURVE_S1.);+#16644 = LINE('',#16645,#16646);+#16645 = CARTESIAN_POINT('',(7.446203942237E-02,1.560692661501,0.));+#16646 = VECTOR('',#16647,1.);+#16647 = DIRECTION('',(0.,0.,1.));+#16648 = PCURVE('',#615,#16649);+#16649 = DEFINITIONAL_REPRESENTATION('',(#16650),#16654);+#16650 = LINE('',#16651,#16652);+#16651 = CARTESIAN_POINT('',(7.500000659463E-02,-9.314404469578E-02));+#16652 = VECTOR('',#16653,1.);+#16653 = DIRECTION('',(0.,1.));+#16654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16655 = PCURVE('',#587,#16656);+#16656 = DEFINITIONAL_REPRESENTATION('',(#16657),#16661);+#16657 = LINE('',#16658,#16659);+#16658 = CARTESIAN_POINT('',(8.276472678887E-02,9.314404469578E-02));+#16659 = VECTOR('',#16660,1.);+#16660 = DIRECTION('',(0.,-1.));+#16661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16662 = ORIENTED_EDGE('',*,*,#15045,.F.);+#16663 = ORIENTED_EDGE('',*,*,#16615,.F.);+#16664 = ADVANCED_FACE('',(#16665),#587,.F.);+#16665 = FACE_BOUND('',#16666,.F.);+#16666 = EDGE_LOOP('',(#16667,#16668,#16669,#16670));+#16667 = ORIENTED_EDGE('',*,*,#5110,.T.);+#16668 = ORIENTED_EDGE('',*,*,#15068,.T.);+#16669 = ORIENTED_EDGE('',*,*,#16642,.F.);+#16670 = ORIENTED_EDGE('',*,*,#571,.F.);+#16671 = ADVANCED_FACE('',(#16672),#707,.F.);+#16672 = FACE_BOUND('',#16673,.F.);+#16673 = EDGE_LOOP('',(#16674,#16675,#16676,#16697));+#16674 = ORIENTED_EDGE('',*,*,#4957,.F.);+#16675 = ORIENTED_EDGE('',*,*,#684,.F.);+#16676 = ORIENTED_EDGE('',*,*,#16677,.F.);+#16677 = EDGE_CURVE('',#15164,#685,#16678,.T.);+#16678 = SURFACE_CURVE('',#16679,(#16683,#16690),.PCURVE_S1.);+#16679 = LINE('',#16680,#16681);+#16680 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+    9.314404469578E-02));+#16681 = VECTOR('',#16682,1.);+#16682 = DIRECTION('',(0.,0.,-1.));+#16683 = PCURVE('',#707,#16684);+#16684 = DEFINITIONAL_REPRESENTATION('',(#16685),#16689);+#16685 = LINE('',#16686,#16687);+#16686 = CARTESIAN_POINT('',(-8.31567872547E-12,-0.));+#16687 = VECTOR('',#16688,1.);+#16688 = DIRECTION('',(0.,1.));+#16689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16690 = PCURVE('',#840,#16691);+#16691 = DEFINITIONAL_REPRESENTATION('',(#16692),#16696);+#16692 = LINE('',#16693,#16694);+#16693 = CARTESIAN_POINT('',(-6.595630000494E-09,0.));+#16694 = VECTOR('',#16695,1.);+#16695 = DIRECTION('',(0.,-1.));+#16696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16697 = ORIENTED_EDGE('',*,*,#15163,.T.);+#16698 = ADVANCED_FACE('',(#16699),#840,.F.);+#16699 = FACE_BOUND('',#16700,.F.);+#16700 = EDGE_LOOP('',(#16701,#16702,#16723,#16724));+#16701 = ORIENTED_EDGE('',*,*,#826,.T.);+#16702 = ORIENTED_EDGE('',*,*,#16703,.T.);+#16703 = EDGE_CURVE('',#799,#15187,#16704,.T.);+#16704 = SURFACE_CURVE('',#16705,(#16709,#16716),.PCURVE_S1.);+#16705 = LINE('',#16706,#16707);+#16706 = CARTESIAN_POINT('',(0.199462039425,1.310692661495,0.));+#16707 = VECTOR('',#16708,1.);+#16708 = DIRECTION('',(0.,0.,1.));+#16709 = PCURVE('',#840,#16710);+#16710 = DEFINITIONAL_REPRESENTATION('',(#16711),#16715);+#16711 = LINE('',#16712,#16713);+#16712 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#16713 = VECTOR('',#16714,1.);+#16714 = DIRECTION('',(0.,1.));+#16715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16716 = PCURVE('',#814,#16717);+#16717 = DEFINITIONAL_REPRESENTATION('',(#16718),#16722);+#16718 = LINE('',#16719,#16720);+#16719 = CARTESIAN_POINT('',(0.249999999996,9.314404469578E-02));+#16720 = VECTOR('',#16721,1.);+#16721 = DIRECTION('',(0.,-1.));+#16722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16723 = ORIENTED_EDGE('',*,*,#15186,.F.);+#16724 = ORIENTED_EDGE('',*,*,#16677,.T.);+#16725 = ADVANCED_FACE('',(#16726),#814,.F.);+#16726 = FACE_BOUND('',#16727,.F.);+#16727 = EDGE_LOOP('',(#16728,#16729,#16750,#16751));+#16728 = ORIENTED_EDGE('',*,*,#798,.F.);+#16729 = ORIENTED_EDGE('',*,*,#16730,.T.);+#16730 = EDGE_CURVE('',#771,#15210,#16731,.T.);+#16731 = SURFACE_CURVE('',#16732,(#16736,#16743),.PCURVE_S1.);+#16732 = LINE('',#16733,#16734);+#16733 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#16734 = VECTOR('',#16735,1.);+#16735 = DIRECTION('',(0.,0.,1.));+#16736 = PCURVE('',#814,#16737);+#16737 = DEFINITIONAL_REPRESENTATION('',(#16738),#16742);+#16738 = LINE('',#16739,#16740);+#16739 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#16740 = VECTOR('',#16741,1.);+#16741 = DIRECTION('',(0.,-1.));+#16742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16743 = PCURVE('',#786,#16744);+#16744 = DEFINITIONAL_REPRESENTATION('',(#16745),#16749);+#16745 = LINE('',#16746,#16747);+#16746 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#16747 = VECTOR('',#16748,1.);+#16748 = DIRECTION('',(0.,1.));+#16749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16750 = ORIENTED_EDGE('',*,*,#15209,.T.);+#16751 = ORIENTED_EDGE('',*,*,#16703,.F.);+#16752 = ADVANCED_FACE('',(#16753),#786,.F.);+#16753 = FACE_BOUND('',#16754,.F.);+#16754 = EDGE_LOOP('',(#16755,#16756,#16777,#16778));+#16755 = ORIENTED_EDGE('',*,*,#770,.T.);+#16756 = ORIENTED_EDGE('',*,*,#16757,.T.);+#16757 = EDGE_CURVE('',#743,#15233,#16758,.T.);+#16758 = SURFACE_CURVE('',#16759,(#16763,#16770),.PCURVE_S1.);+#16759 = LINE('',#16760,#16761);+#16760 = CARTESIAN_POINT('',(7.446203941748E-02,1.060692661499,0.));+#16761 = VECTOR('',#16762,1.);+#16762 = DIRECTION('',(0.,0.,1.));+#16763 = PCURVE('',#786,#16764);+#16764 = DEFINITIONAL_REPRESENTATION('',(#16765),#16769);+#16765 = LINE('',#16766,#16767);+#16766 = CARTESIAN_POINT('',(7.500000659952E-02,-9.314404469578E-02));+#16767 = VECTOR('',#16768,1.);+#16768 = DIRECTION('',(0.,1.));+#16769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16770 = PCURVE('',#758,#16771);+#16771 = DEFINITIONAL_REPRESENTATION('',(#16772),#16776);+#16772 = LINE('',#16773,#16774);+#16773 = CARTESIAN_POINT('',(8.276472678402E-02,9.314404469578E-02));+#16774 = VECTOR('',#16775,1.);+#16775 = DIRECTION('',(0.,-1.));+#16776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16777 = ORIENTED_EDGE('',*,*,#15232,.F.);+#16778 = ORIENTED_EDGE('',*,*,#16730,.F.);+#16779 = ADVANCED_FACE('',(#16780),#758,.F.);+#16780 = FACE_BOUND('',#16781,.F.);+#16781 = EDGE_LOOP('',(#16782,#16783,#16784,#16785));+#16782 = ORIENTED_EDGE('',*,*,#4935,.T.);+#16783 = ORIENTED_EDGE('',*,*,#15255,.T.);+#16784 = ORIENTED_EDGE('',*,*,#16757,.F.);+#16785 = ORIENTED_EDGE('',*,*,#742,.F.);+#16786 = ADVANCED_FACE('',(#16787),#934,.F.);+#16787 = FACE_BOUND('',#16788,.F.);+#16788 = EDGE_LOOP('',(#16789,#16790,#16791,#16812));+#16789 = ORIENTED_EDGE('',*,*,#4782,.F.);+#16790 = ORIENTED_EDGE('',*,*,#918,.T.);+#16791 = ORIENTED_EDGE('',*,*,#16792,.T.);+#16792 = EDGE_CURVE('',#891,#15351,#16793,.T.);+#16793 = SURFACE_CURVE('',#16794,(#16798,#16805),.PCURVE_S1.);+#16794 = LINE('',#16795,#16796);+#16795 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,0.));+#16796 = VECTOR('',#16797,1.);+#16797 = DIRECTION('',(0.,0.,1.));+#16798 = PCURVE('',#934,#16799);+#16799 = DEFINITIONAL_REPRESENTATION('',(#16800),#16804);+#16800 = LINE('',#16801,#16802);+#16801 = CARTESIAN_POINT('',(8.276472676626E-02,-9.314404469578E-02));+#16802 = VECTOR('',#16803,1.);+#16803 = DIRECTION('',(0.,1.));+#16804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16805 = PCURVE('',#906,#16806);+#16806 = DEFINITIONAL_REPRESENTATION('',(#16807),#16811);+#16807 = LINE('',#16808,#16809);+#16808 = CARTESIAN_POINT('',(-1.000588500943E-14,-9.314404469578E-02));+#16809 = VECTOR('',#16810,1.);+#16810 = DIRECTION('',(0.,1.));+#16811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16812 = ORIENTED_EDGE('',*,*,#15350,.T.);+#16813 = ADVANCED_FACE('',(#16814),#906,.F.);+#16814 = FACE_BOUND('',#16815,.F.);+#16815 = EDGE_LOOP('',(#16816,#16817,#16838,#16839));+#16816 = ORIENTED_EDGE('',*,*,#890,.T.);+#16817 = ORIENTED_EDGE('',*,*,#16818,.T.);+#16818 = EDGE_CURVE('',#858,#15374,#16819,.T.);+#16819 = SURFACE_CURVE('',#16820,(#16824,#16831),.PCURVE_S1.);+#16820 = LINE('',#16821,#16822);+#16821 = CARTESIAN_POINT('',(0.199462039425,0.810692661502,0.));+#16822 = VECTOR('',#16823,1.);+#16823 = DIRECTION('',(0.,0.,1.));+#16824 = PCURVE('',#906,#16825);+#16825 = DEFINITIONAL_REPRESENTATION('',(#16826),#16830);+#16826 = LINE('',#16827,#16828);+#16827 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#16828 = VECTOR('',#16829,1.);+#16829 = DIRECTION('',(0.,1.));+#16830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16831 = PCURVE('',#878,#16832);+#16832 = DEFINITIONAL_REPRESENTATION('',(#16833),#16837);+#16833 = LINE('',#16834,#16835);+#16834 = CARTESIAN_POINT('',(0.250000000003,9.314404469578E-02));+#16835 = VECTOR('',#16836,1.);+#16836 = DIRECTION('',(0.,-1.));+#16837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16838 = ORIENTED_EDGE('',*,*,#15373,.F.);+#16839 = ORIENTED_EDGE('',*,*,#16792,.F.);+#16840 = ADVANCED_FACE('',(#16841),#878,.F.);+#16841 = FACE_BOUND('',#16842,.F.);+#16842 = EDGE_LOOP('',(#16843,#16844,#16865,#16866));+#16843 = ORIENTED_EDGE('',*,*,#855,.F.);+#16844 = ORIENTED_EDGE('',*,*,#16845,.T.);+#16845 = EDGE_CURVE('',#856,#15397,#16846,.T.);+#16846 = SURFACE_CURVE('',#16847,(#16851,#16858),.PCURVE_S1.);+#16847 = LINE('',#16848,#16849);+#16848 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#16849 = VECTOR('',#16850,1.);+#16850 = DIRECTION('',(0.,0.,1.));+#16851 = PCURVE('',#878,#16852);+#16852 = DEFINITIONAL_REPRESENTATION('',(#16853),#16857);+#16853 = LINE('',#16854,#16855);+#16854 = CARTESIAN_POINT('',(-1.99995575656E-12,9.314404469578E-02));+#16855 = VECTOR('',#16856,1.);+#16856 = DIRECTION('',(0.,-1.));+#16857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16858 = PCURVE('',#1011,#16859);+#16859 = DEFINITIONAL_REPRESENTATION('',(#16860),#16864);+#16860 = LINE('',#16861,#16862);+#16861 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#16862 = VECTOR('',#16863,1.);+#16863 = DIRECTION('',(0.,1.));+#16864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16865 = ORIENTED_EDGE('',*,*,#15396,.T.);+#16866 = ORIENTED_EDGE('',*,*,#16818,.F.);+#16867 = ADVANCED_FACE('',(#16868),#1011,.F.);+#16868 = FACE_BOUND('',#16869,.F.);+#16869 = EDGE_LOOP('',(#16870,#16871,#16892,#16893));+#16870 = ORIENTED_EDGE('',*,*,#997,.T.);+#16871 = ORIENTED_EDGE('',*,*,#16872,.T.);+#16872 = EDGE_CURVE('',#970,#15420,#16873,.T.);+#16873 = SURFACE_CURVE('',#16874,(#16878,#16885),.PCURVE_S1.);+#16874 = LINE('',#16875,#16876);+#16875 = CARTESIAN_POINT('',(7.446203941383E-02,0.560692661497,0.));+#16876 = VECTOR('',#16877,1.);+#16877 = DIRECTION('',(0.,0.,1.));+#16878 = PCURVE('',#1011,#16879);+#16879 = DEFINITIONAL_REPRESENTATION('',(#16880),#16884);+#16880 = LINE('',#16881,#16882);+#16881 = CARTESIAN_POINT('',(7.500000660317E-02,-9.314404469578E-02));+#16882 = VECTOR('',#16883,1.);+#16883 = DIRECTION('',(0.,1.));+#16884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16885 = PCURVE('',#985,#16886);+#16886 = DEFINITIONAL_REPRESENTATION('',(#16887),#16891);+#16887 = LINE('',#16888,#16889);+#16888 = CARTESIAN_POINT('',(8.276472677986E-02,9.314404469578E-02));+#16889 = VECTOR('',#16890,1.);+#16890 = DIRECTION('',(0.,-1.));+#16891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16892 = ORIENTED_EDGE('',*,*,#15419,.F.);+#16893 = ORIENTED_EDGE('',*,*,#16845,.F.);+#16894 = ADVANCED_FACE('',(#16895),#985,.F.);+#16895 = FACE_BOUND('',#16896,.F.);+#16896 = EDGE_LOOP('',(#16897,#16898,#16899,#16900));+#16897 = ORIENTED_EDGE('',*,*,#4760,.T.);+#16898 = ORIENTED_EDGE('',*,*,#15442,.T.);+#16899 = ORIENTED_EDGE('',*,*,#16872,.F.);+#16900 = ORIENTED_EDGE('',*,*,#969,.F.);+#16901 = ADVANCED_FACE('',(#16902),#2859,.F.);+#16902 = FACE_BOUND('',#16903,.F.);+#16903 = EDGE_LOOP('',(#16904,#16905,#16906,#16929));+#16904 = ORIENTED_EDGE('',*,*,#5285,.F.);+#16905 = ORIENTED_EDGE('',*,*,#2843,.T.);+#16906 = ORIENTED_EDGE('',*,*,#16907,.F.);+#16907 = EDGE_CURVE('',#16908,#2816,#16910,.T.);+#16908 = VERTEX_POINT('',#16909);+#16909 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+    9.314404469578E-02));+#16910 = SURFACE_CURVE('',#16911,(#16915,#16922),.PCURVE_S1.);+#16911 = LINE('',#16912,#16913);+#16912 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+    9.314404469578E-02));+#16913 = VECTOR('',#16914,1.);+#16914 = DIRECTION('',(0.,0.,-1.));+#16915 = PCURVE('',#2859,#16916);+#16916 = DEFINITIONAL_REPRESENTATION('',(#16917),#16921);+#16917 = LINE('',#16918,#16919);+#16918 = CARTESIAN_POINT('',(8.276472678274E-02,0.));+#16919 = VECTOR('',#16920,1.);+#16920 = DIRECTION('',(0.,-1.));+#16921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16922 = PCURVE('',#2831,#16923);+#16923 = DEFINITIONAL_REPRESENTATION('',(#16924),#16928);+#16924 = LINE('',#16925,#16926);+#16925 = CARTESIAN_POINT('',(-9.992007221626E-15,0.));+#16926 = VECTOR('',#16927,1.);+#16927 = DIRECTION('',(0.,-1.));+#16928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16929 = ORIENTED_EDGE('',*,*,#16930,.T.);+#16930 = EDGE_CURVE('',#16908,#5286,#16931,.T.);+#16931 = SURFACE_CURVE('',#16932,(#16936,#16943),.PCURVE_S1.);+#16932 = LINE('',#16933,#16934);+#16933 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+    9.314404469578E-02));+#16934 = VECTOR('',#16935,1.);+#16935 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#16936 = PCURVE('',#2859,#16937);+#16937 = DEFINITIONAL_REPRESENTATION('',(#16938),#16942);+#16938 = LINE('',#16939,#16940);+#16939 = CARTESIAN_POINT('',(8.276472678274E-02,0.));+#16940 = VECTOR('',#16941,1.);+#16941 = DIRECTION('',(-1.,0.));+#16942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16943 = PCURVE('',#5324,#16944);+#16944 = DEFINITIONAL_REPRESENTATION('',(#16945),#16949);+#16945 = LINE('',#16946,#16947);+#16946 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000312));+#16947 = VECTOR('',#16948,1.);+#16948 = DIRECTION('',(-0.906183139998,0.422885465325));+#16949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16950 = ADVANCED_FACE('',(#16951),#2831,.F.);+#16951 = FACE_BOUND('',#16952,.F.);+#16952 = EDGE_LOOP('',(#16953,#16954,#16977,#16998));+#16953 = ORIENTED_EDGE('',*,*,#2815,.T.);+#16954 = ORIENTED_EDGE('',*,*,#16955,.F.);+#16955 = EDGE_CURVE('',#16956,#2783,#16958,.T.);+#16956 = VERTEX_POINT('',#16957);+#16957 = CARTESIAN_POINT('',(0.774462032874,2.760692661495,+    9.314404469578E-02));+#16958 = SURFACE_CURVE('',#16959,(#16963,#16970),.PCURVE_S1.);+#16959 = LINE('',#16960,#16961);+#16960 = CARTESIAN_POINT('',(0.774462032845,2.760692661498,+    9.314404469578E-02));+#16961 = VECTOR('',#16962,1.);+#16962 = DIRECTION('',(-3.19917243E-11,0.,-1.));+#16963 = PCURVE('',#2831,#16964);+#16964 = DEFINITIONAL_REPRESENTATION('',(#16965),#16969);+#16965 = LINE('',#16966,#16967);+#16966 = CARTESIAN_POINT('',(0.699999993428,0.));+#16967 = VECTOR('',#16968,1.);+#16968 = DIRECTION('',(-3.19917243E-11,-1.));+#16969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16970 = PCURVE('',#2803,#16971);+#16971 = DEFINITIONAL_REPRESENTATION('',(#16972),#16976);+#16972 = LINE('',#16973,#16974);+#16973 = CARTESIAN_POINT('',(3.14159265347,9.277572400273E-22));+#16974 = VECTOR('',#16975,1.);+#16975 = DIRECTION('',(2.559337944E-10,1.));+#16976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16977 = ORIENTED_EDGE('',*,*,#16978,.F.);+#16978 = EDGE_CURVE('',#16908,#16956,#16979,.T.);+#16979 = SURFACE_CURVE('',#16980,(#16984,#16991),.PCURVE_S1.);+#16980 = LINE('',#16981,#16982);+#16981 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+    9.314404469578E-02));+#16982 = VECTOR('',#16983,1.);+#16983 = DIRECTION('',(1.,-2.2204460701E-12,0.));+#16984 = PCURVE('',#2831,#16985);+#16985 = DEFINITIONAL_REPRESENTATION('',(#16986),#16990);+#16986 = LINE('',#16987,#16988);+#16987 = CARTESIAN_POINT('',(-9.992007221626E-15,0.));+#16988 = VECTOR('',#16989,1.);+#16989 = DIRECTION('',(1.,0.));+#16990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16991 = PCURVE('',#5324,#16992);+#16992 = DEFINITIONAL_REPRESENTATION('',(#16993),#16997);+#16993 = LINE('',#16994,#16995);+#16994 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000312));+#16995 = VECTOR('',#16996,1.);+#16996 = DIRECTION('',(1.,-2.2204460701E-12));+#16997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#16998 = ORIENTED_EDGE('',*,*,#16907,.T.);+#16999 = ADVANCED_FACE('',(#17000),#2803,.F.);+#17000 = FACE_BOUND('',#17001,.F.);+#17001 = EDGE_LOOP('',(#17002,#17003,#17026,#17052));+#17002 = ORIENTED_EDGE('',*,*,#2782,.F.);+#17003 = ORIENTED_EDGE('',*,*,#17004,.T.);+#17004 = EDGE_CURVE('',#2755,#17005,#17007,.T.);+#17005 = VERTEX_POINT('',#17006);+#17006 = CARTESIAN_POINT('',(0.77446203282,3.010692661495,+    9.314404469578E-02));+#17007 = SURFACE_CURVE('',#17008,(#17012,#17019),.PCURVE_S1.);+#17008 = LINE('',#17009,#17010);+#17009 = CARTESIAN_POINT('',(0.774462032827,3.010692661495,0.));+#17010 = VECTOR('',#17011,1.);+#17011 = DIRECTION('',(-7.00027558919E-12,0.,1.));+#17012 = PCURVE('',#2803,#17013);+#17013 = DEFINITIONAL_REPRESENTATION('',(#17014),#17018);+#17014 = LINE('',#17015,#17016);+#17015 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#17016 = VECTOR('',#17017,1.);+#17017 = DIRECTION('',(0.,-1.));+#17018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17019 = PCURVE('',#2770,#17020);+#17020 = DEFINITIONAL_REPRESENTATION('',(#17021),#17025);+#17021 = LINE('',#17022,#17023);+#17022 = CARTESIAN_POINT('',(-0.624999993431,-9.314404469578E-02));+#17023 = VECTOR('',#17024,1.);+#17024 = DIRECTION('',(7.00027558919E-12,1.));+#17025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17026 = ORIENTED_EDGE('',*,*,#17027,.T.);+#17027 = EDGE_CURVE('',#17005,#16956,#17028,.T.);+#17028 = SURFACE_CURVE('',#17029,(#17034,#17041),.PCURVE_S1.);+#17029 = CIRCLE('',#17030,0.125);+#17030 = AXIS2_PLACEMENT_3D('',#17031,#17032,#17033);+#17031 = CARTESIAN_POINT('',(0.77446203283,2.885692661495,+    9.314404469578E-02));+#17032 = DIRECTION('',(0.,0.,-1.));+#17033 = DIRECTION('',(-7.764100473651E-11,1.,0.));+#17034 = PCURVE('',#2803,#17035);+#17035 = DEFINITIONAL_REPRESENTATION('',(#17036),#17040);+#17036 = LINE('',#17037,#17038);+#17037 = CARTESIAN_POINT('',(0.,0.));+#17038 = VECTOR('',#17039,1.);+#17039 = DIRECTION('',(1.,0.));+#17040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17041 = PCURVE('',#5324,#17042);+#17042 = DEFINITIONAL_REPRESENTATION('',(#17043),#17051);+#17043 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17044,#17045,#17046,#17047+    ,#17048,#17049,#17050),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#17044 = CARTESIAN_POINT('',(0.356922100027,0.124999999684));+#17045 = CARTESIAN_POINT('',(0.573428450973,0.124999999701));+#17046 = CARTESIAN_POINT('',(0.465175275515,-6.25000003076E-02));+#17047 = CARTESIAN_POINT('',(0.356922100056,-0.250000000316));+#17048 = CARTESIAN_POINT('',(0.248668924569,-6.250000032441E-02));+#17049 = CARTESIAN_POINT('',(0.140415749081,0.124999999667));+#17050 = CARTESIAN_POINT('',(0.356922100027,0.124999999684));+#17051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17052 = ORIENTED_EDGE('',*,*,#16955,.T.);+#17053 = ADVANCED_FACE('',(#17054),#2770,.F.);+#17054 = FACE_BOUND('',#17055,.F.);+#17055 = EDGE_LOOP('',(#17056,#17057,#17080,#17101));+#17056 = ORIENTED_EDGE('',*,*,#2754,.T.);+#17057 = ORIENTED_EDGE('',*,*,#17058,.T.);+#17058 = EDGE_CURVE('',#2727,#17059,#17061,.T.);+#17059 = VERTEX_POINT('',#17060);+#17060 = CARTESIAN_POINT('',(7.446203941993E-02,3.010692661496,+    9.314404469578E-02));+#17061 = SURFACE_CURVE('',#17062,(#17066,#17073),.PCURVE_S1.);+#17062 = LINE('',#17063,#17064);+#17063 = CARTESIAN_POINT('',(7.446203941993E-02,3.010692661496,0.));+#17064 = VECTOR('',#17065,1.);+#17065 = DIRECTION('',(0.,0.,1.));+#17066 = PCURVE('',#2770,#17067);+#17067 = DEFINITIONAL_REPRESENTATION('',(#17068),#17072);+#17068 = LINE('',#17069,#17070);+#17069 = CARTESIAN_POINT('',(7.499999997607E-02,-9.314404469578E-02));+#17070 = VECTOR('',#17071,1.);+#17071 = DIRECTION('',(0.,1.));+#17072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17073 = PCURVE('',#2742,#17074);+#17074 = DEFINITIONAL_REPRESENTATION('',(#17075),#17079);+#17075 = LINE('',#17076,#17077);+#17076 = CARTESIAN_POINT('',(8.276473278661E-02,9.314404469578E-02));+#17077 = VECTOR('',#17078,1.);+#17078 = DIRECTION('',(0.,-1.));+#17079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17080 = ORIENTED_EDGE('',*,*,#17081,.F.);+#17081 = EDGE_CURVE('',#17005,#17059,#17082,.T.);+#17082 = SURFACE_CURVE('',#17083,(#17087,#17094),.PCURVE_S1.);+#17083 = LINE('',#17084,#17085);+#17084 = CARTESIAN_POINT('',(0.774462032827,3.010692661495,+    9.314404469578E-02));+#17085 = VECTOR('',#17086,1.);+#17086 = DIRECTION('',(-1.,4.872293091104E-13,0.));+#17087 = PCURVE('',#2770,#17088);+#17088 = DEFINITIONAL_REPRESENTATION('',(#17089),#17093);+#17089 = LINE('',#17090,#17091);+#17090 = CARTESIAN_POINT('',(-0.624999993431,0.));+#17091 = VECTOR('',#17092,1.);+#17092 = DIRECTION('',(1.,0.));+#17093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17094 = PCURVE('',#5324,#17095);+#17095 = DEFINITIONAL_REPRESENTATION('',(#17096),#17100);+#17096 = LINE('',#17097,#17098);+#17097 = CARTESIAN_POINT('',(0.356922100034,0.124999999684));+#17098 = VECTOR('',#17099,1.);+#17099 = DIRECTION('',(-1.,4.872293091104E-13));+#17100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17101 = ORIENTED_EDGE('',*,*,#17004,.F.);+#17102 = ADVANCED_FACE('',(#17103),#2742,.F.);+#17103 = FACE_BOUND('',#17104,.F.);+#17104 = EDGE_LOOP('',(#17105,#17106,#17127,#17128));+#17105 = ORIENTED_EDGE('',*,*,#5443,.T.);+#17106 = ORIENTED_EDGE('',*,*,#17107,.T.);+#17107 = EDGE_CURVE('',#5421,#17059,#17108,.T.);+#17108 = SURFACE_CURVE('',#17109,(#17113,#17120),.PCURVE_S1.);+#17109 = LINE('',#17110,#17111);+#17110 = CARTESIAN_POINT('',(0.,2.975943712833,9.314404469578E-02));+#17111 = VECTOR('',#17112,1.);+#17112 = DIRECTION('',(0.906183154294,0.422885434691,0.));+#17113 = PCURVE('',#2742,#17114);+#17114 = DEFINITIONAL_REPRESENTATION('',(#17115),#17119);+#17115 = LINE('',#17116,#17117);+#17116 = CARTESIAN_POINT('',(5.936627694821E-04,0.));+#17117 = VECTOR('',#17118,1.);+#17118 = DIRECTION('',(1.,0.));+#17119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17120 = PCURVE('',#5324,#17121);+#17121 = DEFINITIONAL_REPRESENTATION('',(#17122),#17126);+#17122 = LINE('',#17123,#17124);+#17123 = CARTESIAN_POINT('',(-0.417539932793,9.0251051022E-02));+#17124 = VECTOR('',#17125,1.);+#17125 = DIRECTION('',(0.906183154294,0.422885434691));+#17126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17127 = ORIENTED_EDGE('',*,*,#17058,.F.);+#17128 = ORIENTED_EDGE('',*,*,#2726,.F.);+#17129 = ADVANCED_FACE('',(#17130),#5324,.F.);+#17130 = FACE_BOUND('',#17131,.F.);+#17131 = EDGE_LOOP('',(#17132,#17133,#17134,#17135,#17136,#17137,#17138,+    #17139,#17162,#17190));+#17132 = ORIENTED_EDGE('',*,*,#5308,.F.);+#17133 = ORIENTED_EDGE('',*,*,#16930,.F.);+#17134 = ORIENTED_EDGE('',*,*,#16978,.T.);+#17135 = ORIENTED_EDGE('',*,*,#17027,.F.);+#17136 = ORIENTED_EDGE('',*,*,#17081,.T.);+#17137 = ORIENTED_EDGE('',*,*,#17107,.F.);+#17138 = ORIENTED_EDGE('',*,*,#5420,.F.);+#17139 = ORIENTED_EDGE('',*,*,#17140,.T.);+#17140 = EDGE_CURVE('',#5393,#17141,#17143,.T.);+#17141 = VERTEX_POINT('',#17142);+#17142 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+    9.314404469578E-02));+#17143 = SURFACE_CURVE('',#17144,(#17148,#17155),.PCURVE_S1.);+#17144 = LINE('',#17145,#17146);+#17145 = CARTESIAN_POINT('',(0.,2.925983916503,9.314404469578E-02));+#17146 = VECTOR('',#17147,1.);+#17147 = DIRECTION('',(1.,0.,0.));+#17148 = PCURVE('',#5324,#17149);+#17149 = DEFINITIONAL_REPRESENTATION('',(#17150),#17154);+#17150 = LINE('',#17151,#17152);+#17151 = CARTESIAN_POINT('',(-0.417539932793,4.0291254692E-02));+#17152 = VECTOR('',#17153,1.);+#17153 = DIRECTION('',(1.,0.));+#17154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17155 = PCURVE('',#5408,#17156);+#17156 = DEFINITIONAL_REPRESENTATION('',(#17157),#17161);+#17157 = LINE('',#17158,#17159);+#17158 = CARTESIAN_POINT('',(5.925868158323E-02,0.1));+#17159 = VECTOR('',#17160,1.);+#17160 = DIRECTION('',(-1.,-0.));+#17161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17162 = ORIENTED_EDGE('',*,*,#17163,.T.);+#17163 = EDGE_CURVE('',#17141,#17164,#17166,.T.);+#17164 = VERTEX_POINT('',#17165);+#17165 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+    9.314404469578E-02));+#17166 = SURFACE_CURVE('',#17167,(#17171,#17178),.PCURVE_S1.);+#17167 = LINE('',#17168,#17169);+#17168 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+    9.314404469578E-02));+#17169 = VECTOR('',#17170,1.);+#17170 = DIRECTION('',(0.,-1.,0.));+#17171 = PCURVE('',#5324,#17172);+#17172 = DEFINITIONAL_REPRESENTATION('',(#17173),#17177);+#17173 = LINE('',#17174,#17175);+#17174 = CARTESIAN_POINT('',(-0.3610844747,4.0291254692E-02));+#17175 = VECTOR('',#17176,1.);+#17176 = DIRECTION('',(0.,-1.));+#17177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17178 = PCURVE('',#17179,#17184);+#17179 = PLANE('',#17180);+#17180 = AXIS2_PLACEMENT_3D('',#17181,#17182,#17183);+#17181 = CARTESIAN_POINT('',(5.645545809334E-02,3.084616552949,+    0.193144044696));+#17182 = DIRECTION('',(-1.,0.,0.));+#17183 = DIRECTION('',(0.,-1.,0.));+#17184 = DEFINITIONAL_REPRESENTATION('',(#17185),#17189);+#17185 = LINE('',#17186,#17187);+#17186 = CARTESIAN_POINT('',(0.158632636446,-0.1));+#17187 = VECTOR('',#17188,1.);+#17188 = DIRECTION('',(1.,0.));+#17189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17190 = ORIENTED_EDGE('',*,*,#17191,.T.);+#17191 = EDGE_CURVE('',#17164,#5309,#17192,.T.);+#17192 = SURFACE_CURVE('',#17193,(#17197,#17204),.PCURVE_S1.);+#17193 = LINE('',#17194,#17195);+#17194 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+    9.314404469578E-02));+#17195 = VECTOR('',#17196,1.);+#17196 = DIRECTION('',(-1.,0.,0.));+#17197 = PCURVE('',#5324,#17198);+#17198 = DEFINITIONAL_REPRESENTATION('',(#17199),#17203);+#17199 = LINE('',#17200,#17201);+#17200 = CARTESIAN_POINT('',(-0.3610844747,-3.970874531E-02));+#17201 = VECTOR('',#17202,1.);+#17202 = DIRECTION('',(-1.,0.));+#17203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17204 = PCURVE('',#5352,#17205);+#17205 = DEFINITIONAL_REPRESENTATION('',(#17206),#17210);+#17206 = LINE('',#17207,#17208);+#17207 = CARTESIAN_POINT('',(0.132196776519,0.1));+#17208 = VECTOR('',#17209,1.);+#17209 = DIRECTION('',(-1.,0.));+#17210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17211 = ADVANCED_FACE('',(#17212),#5408,.T.);+#17212 = FACE_BOUND('',#17213,.F.);+#17213 = EDGE_LOOP('',(#17214,#17215,#17238,#17259));+#17214 = ORIENTED_EDGE('',*,*,#5392,.F.);+#17215 = ORIENTED_EDGE('',*,*,#17216,.F.);+#17216 = EDGE_CURVE('',#17217,#5365,#17219,.T.);+#17217 = VERTEX_POINT('',#17218);+#17218 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+    0.193144044696));+#17219 = SURFACE_CURVE('',#17220,(#17224,#17231),.PCURVE_S1.);+#17220 = LINE('',#17221,#17222);+#17221 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+    0.193144044696));+#17222 = VECTOR('',#17223,1.);+#17223 = DIRECTION('',(-1.,0.,0.));+#17224 = PCURVE('',#5408,#17225);+#17225 = DEFINITIONAL_REPRESENTATION('',(#17226),#17230);+#17226 = LINE('',#17227,#17228);+#17227 = CARTESIAN_POINT('',(2.80322348989E-03,0.));+#17228 = VECTOR('',#17229,1.);+#17229 = DIRECTION('',(1.,0.));+#17230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17231 = PCURVE('',#5380,#17232);+#17232 = DEFINITIONAL_REPRESENTATION('',(#17233),#17237);+#17233 = LINE('',#17234,#17235);+#17234 = CARTESIAN_POINT('',(-0.764073635093,5.4317844719E-02));+#17235 = VECTOR('',#17236,1.);+#17236 = DIRECTION('',(-1.,0.));+#17237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17238 = ORIENTED_EDGE('',*,*,#17239,.T.);+#17239 = EDGE_CURVE('',#17217,#17141,#17240,.T.);+#17240 = SURFACE_CURVE('',#17241,(#17245,#17252),.PCURVE_S1.);+#17241 = LINE('',#17242,#17243);+#17242 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+    0.193144044696));+#17243 = VECTOR('',#17244,1.);+#17244 = DIRECTION('',(0.,0.,-1.));+#17245 = PCURVE('',#5408,#17246);+#17246 = DEFINITIONAL_REPRESENTATION('',(#17247),#17251);+#17247 = LINE('',#17248,#17249);+#17248 = CARTESIAN_POINT('',(2.80322348989E-03,0.));+#17249 = VECTOR('',#17250,1.);+#17250 = DIRECTION('',(0.,1.));+#17251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17252 = PCURVE('',#17179,#17253);+#17253 = DEFINITIONAL_REPRESENTATION('',(#17254),#17258);+#17254 = LINE('',#17255,#17256);+#17255 = CARTESIAN_POINT('',(0.158632636446,0.));+#17256 = VECTOR('',#17257,1.);+#17257 = DIRECTION('',(0.,-1.));+#17258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17259 = ORIENTED_EDGE('',*,*,#17140,.F.);+#17260 = ADVANCED_FACE('',(#17261),#5380,.F.);+#17261 = FACE_BOUND('',#17262,.F.);+#17262 = EDGE_LOOP('',(#17263,#17264,#17287,#17308));+#17263 = ORIENTED_EDGE('',*,*,#5364,.F.);+#17264 = ORIENTED_EDGE('',*,*,#17265,.F.);+#17265 = EDGE_CURVE('',#17266,#5337,#17268,.T.);+#17266 = VERTEX_POINT('',#17267);+#17267 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+    0.193144044696));+#17268 = SURFACE_CURVE('',#17269,(#17273,#17280),.PCURVE_S1.);+#17269 = LINE('',#17270,#17271);+#17270 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+    0.193144044696));+#17271 = VECTOR('',#17272,1.);+#17272 = DIRECTION('',(-1.,0.,0.));+#17273 = PCURVE('',#5380,#17274);+#17274 = DEFINITIONAL_REPRESENTATION('',(#17275),#17279);+#17275 = LINE('',#17276,#17277);+#17276 = CARTESIAN_POINT('',(-0.764073635093,-2.5682155283E-02));+#17277 = VECTOR('',#17278,1.);+#17278 = DIRECTION('',(-1.,0.));+#17279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17280 = PCURVE('',#5352,#17281);+#17281 = DEFINITIONAL_REPRESENTATION('',(#17282),#17286);+#17282 = LINE('',#17283,#17284);+#17283 = CARTESIAN_POINT('',(0.132196776519,0.));+#17284 = VECTOR('',#17285,1.);+#17285 = DIRECTION('',(-1.,0.));+#17286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17287 = ORIENTED_EDGE('',*,*,#17288,.T.);+#17288 = EDGE_CURVE('',#17266,#17217,#17289,.T.);+#17289 = SURFACE_CURVE('',#17290,(#17294,#17301),.PCURVE_S1.);+#17290 = LINE('',#17291,#17292);+#17291 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+    0.193144044696));+#17292 = VECTOR('',#17293,1.);+#17293 = DIRECTION('',(0.,1.,0.));+#17294 = PCURVE('',#5380,#17295);+#17295 = DEFINITIONAL_REPRESENTATION('',(#17296),#17300);+#17296 = LINE('',#17297,#17298);+#17297 = CARTESIAN_POINT('',(-0.764073635093,-2.5682155283E-02));+#17298 = VECTOR('',#17299,1.);+#17299 = DIRECTION('',(0.,1.));+#17300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17301 = PCURVE('',#17179,#17302);+#17302 = DEFINITIONAL_REPRESENTATION('',(#17303),#17307);+#17303 = LINE('',#17304,#17305);+#17304 = CARTESIAN_POINT('',(0.238632636448,0.));+#17305 = VECTOR('',#17306,1.);+#17306 = DIRECTION('',(-1.,0.));+#17307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17308 = ORIENTED_EDGE('',*,*,#17216,.T.);+#17309 = ADVANCED_FACE('',(#17310),#5352,.T.);+#17310 = FACE_BOUND('',#17311,.F.);+#17311 = EDGE_LOOP('',(#17312,#17313,#17314,#17335));+#17312 = ORIENTED_EDGE('',*,*,#5336,.T.);+#17313 = ORIENTED_EDGE('',*,*,#17191,.F.);+#17314 = ORIENTED_EDGE('',*,*,#17315,.F.);+#17315 = EDGE_CURVE('',#17266,#17164,#17316,.T.);+#17316 = SURFACE_CURVE('',#17317,(#17321,#17328),.PCURVE_S1.);+#17317 = LINE('',#17318,#17319);+#17318 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+    0.193144044696));+#17319 = VECTOR('',#17320,1.);+#17320 = DIRECTION('',(0.,0.,-1.));+#17321 = PCURVE('',#5352,#17322);+#17322 = DEFINITIONAL_REPRESENTATION('',(#17323),#17327);+#17323 = LINE('',#17324,#17325);+#17324 = CARTESIAN_POINT('',(0.132196776519,0.));+#17325 = VECTOR('',#17326,1.);+#17326 = DIRECTION('',(0.,1.));+#17327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17328 = PCURVE('',#17179,#17329);+#17329 = DEFINITIONAL_REPRESENTATION('',(#17330),#17334);+#17330 = LINE('',#17331,#17332);+#17331 = CARTESIAN_POINT('',(0.238632636448,0.));+#17332 = VECTOR('',#17333,1.);+#17333 = DIRECTION('',(0.,-1.));+#17334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17335 = ORIENTED_EDGE('',*,*,#17265,.T.);+#17336 = ADVANCED_FACE('',(#17337),#17179,.T.);+#17337 = FACE_BOUND('',#17338,.F.);+#17338 = EDGE_LOOP('',(#17339,#17340,#17341,#17342));+#17339 = ORIENTED_EDGE('',*,*,#17315,.T.);+#17340 = ORIENTED_EDGE('',*,*,#17163,.F.);+#17341 = ORIENTED_EDGE('',*,*,#17239,.F.);+#17342 = ORIENTED_EDGE('',*,*,#17288,.F.);+#17343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#17347)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#17344,#17345,#17346)) +REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#17344 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#17345 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#17346 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#17347 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#17344,+  'distance_accuracy_value','confusion accuracy');+#17348 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#17349,#17351);+#17349 = ( REPRESENTATION_RELATIONSHIP('','',#82,#55) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#17350) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#17350 = ITEM_DEFINED_TRANSFORMATION('','',#11,#56);+#17351 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+  #17352);+#17352 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','MOLD_CPOMPOUND_1','',#50,+  #77,$);+#17353 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#79));+#17354 = SHAPE_DEFINITION_REPRESENTATION(#17355,#17361);+#17355 = PRODUCT_DEFINITION_SHAPE('','',#17356);+#17356 = PRODUCT_DEFINITION('design','',#17357,#17360);+#17357 = PRODUCT_DEFINITION_FORMATION('','',#17358);+#17358 = PRODUCT('LF_NEW_2_AF0_ASM','LF_NEW_2_AF0_ASM','',(#17359));+#17359 = PRODUCT_CONTEXT('',#2,'mechanical');+#17360 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#17361 = SHAPE_REPRESENTATION('',(#11,#17362,#17366,#17370,#17374,#17378+    ,#17382,#17386,#17390,#17394,#17398),#17402);+#17362 = AXIS2_PLACEMENT_3D('',#17363,#17364,#17365);+#17363 = CARTESIAN_POINT('',(0.,0.,0.));+#17364 = DIRECTION('',(0.,0.,1.));+#17365 = DIRECTION('',(1.,0.,0.));+#17366 = AXIS2_PLACEMENT_3D('',#17367,#17368,#17369);+#17367 = CARTESIAN_POINT('',(0.,0.,0.));+#17368 = DIRECTION('',(0.,0.,1.));+#17369 = DIRECTION('',(1.,0.,0.));+#17370 = AXIS2_PLACEMENT_3D('',#17371,#17372,#17373);+#17371 = CARTESIAN_POINT('',(0.,0.,0.));+#17372 = DIRECTION('',(0.,0.,1.));+#17373 = DIRECTION('',(1.,0.,0.));+#17374 = AXIS2_PLACEMENT_3D('',#17375,#17376,#17377);+#17375 = CARTESIAN_POINT('',(0.,0.,0.));+#17376 = DIRECTION('',(0.,0.,1.));+#17377 = DIRECTION('',(1.,0.,0.));+#17378 = AXIS2_PLACEMENT_3D('',#17379,#17380,#17381);+#17379 = CARTESIAN_POINT('',(0.,0.,0.));+#17380 = DIRECTION('',(0.,0.,1.));+#17381 = DIRECTION('',(1.,0.,0.));+#17382 = AXIS2_PLACEMENT_3D('',#17383,#17384,#17385);+#17383 = CARTESIAN_POINT('',(0.,0.,0.));+#17384 = DIRECTION('',(0.,0.,1.));+#17385 = DIRECTION('',(1.,0.,0.));+#17386 = AXIS2_PLACEMENT_3D('',#17387,#17388,#17389);+#17387 = CARTESIAN_POINT('',(0.,0.,0.));+#17388 = DIRECTION('',(0.,0.,1.));+#17389 = DIRECTION('',(1.,0.,0.));+#17390 = AXIS2_PLACEMENT_3D('',#17391,#17392,#17393);+#17391 = CARTESIAN_POINT('',(0.,0.,0.));+#17392 = DIRECTION('',(0.,0.,1.));+#17393 = DIRECTION('',(1.,0.,0.));+#17394 = AXIS2_PLACEMENT_3D('',#17395,#17396,#17397);+#17395 = CARTESIAN_POINT('',(0.,0.,0.));+#17396 = DIRECTION('',(0.,0.,1.));+#17397 = DIRECTION('',(1.,0.,0.));+#17398 = AXIS2_PLACEMENT_3D('',#17399,#17400,#17401);+#17399 = CARTESIAN_POINT('',(0.,0.,0.));+#17400 = DIRECTION('',(0.,0.,1.));+#17401 = DIRECTION('',(1.,0.,0.));+#17402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#17406)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#17403,#17404,#17405)) +REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#17403 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#17404 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#17405 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#17406 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#17403,+  'distance_accuracy_value','confusion accuracy');+#17407 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#17408,#17410);+#17408 = ( REPRESENTATION_RELATIONSHIP('','',#17361,#55) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#17409) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#17409 = ITEM_DEFINED_TRANSFORMATION('','',#11,#60);+#17410 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+  #17411);+#17411 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('54','LF_NEW_2_1','',#50,#17356,+  $);+#17412 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#17358));+#17413 = SHAPE_DEFINITION_REPRESENTATION(#17414,#17420);+#17414 = PRODUCT_DEFINITION_SHAPE('','',#17415);+#17415 = PRODUCT_DEFINITION('design','',#17416,#17419);+#17416 = PRODUCT_DEFINITION_FORMATION('','',#17417);+#17417 = PRODUCT('SOLID1-489_AF0','SOLID1-489_AF0','',(#17418));+#17418 = PRODUCT_CONTEXT('',#2,'mechanical');+#17419 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#17420 = SHAPE_REPRESENTATION('',(#11,#17421,#21047),#21689);+#17421 = MANIFOLD_SOLID_BREP('',#17422);+#17422 = CLOSED_SHELL('',(#17423,#18281,#18464,#18642,#18820,#18998,+    #19897,#19946,#20017,#20088,#20159,#20208,#20235,#20262,#20309,+    #20336,#20383,#20390,#20397,#20404,#20411,#20418,#20425,#20452,+    #20479,#20506,#20533,#20540,#20567,#20594,#20621,#20648,#20655,+    #20682,#20709,#20736,#20763,#20770,#20797,#20824,#20851,#20878,+    #20905,#20932,#20959,#20986,#21013,#21040));+#17423 = ADVANCED_FACE('',(#17424),#17438,.F.);+#17424 = FACE_BOUND('',#17425,.F.);+#17425 = EDGE_LOOP('',(#17426,#17461,#17489,#17517,#17545,#17573,#17606,+    #17634,#17667,#17695,#17723,#17751,#17779,#17807,#17835,#17863,+    #17891,#17919,#17947,#17975,#18003,#18031,#18059,#18087,#18115,+    #18143,#18171,#18199,#18227,#18255));+#17426 = ORIENTED_EDGE('',*,*,#17427,.F.);+#17427 = EDGE_CURVE('',#17428,#17430,#17432,.T.);+#17428 = VERTEX_POINT('',#17429);+#17429 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,-0.1));+#17430 = VERTEX_POINT('',#17431);+#17431 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,-0.1));+#17432 = SURFACE_CURVE('',#17433,(#17437,#17449),.PCURVE_S1.);+#17433 = LINE('',#17434,#17435);+#17434 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,-0.1));+#17435 = VECTOR('',#17436,1.);+#17436 = DIRECTION('',(0.,1.,0.));+#17437 = PCURVE('',#17438,#17443);+#17438 = PLANE('',#17439);+#17439 = AXIS2_PLACEMENT_3D('',#17440,#17441,#17442);+#17440 = CARTESIAN_POINT('',(0.445267411281,0.790763807489,-0.1));+#17441 = DIRECTION('',(0.,0.,1.));+#17442 = DIRECTION('',(1.,0.,-0.));+#17443 = DEFINITIONAL_REPRESENTATION('',(#17444),#17448);+#17444 = LINE('',#17445,#17446);+#17445 = CARTESIAN_POINT('',(-0.594729450677,-0.88101485576));+#17446 = VECTOR('',#17447,1.);+#17447 = DIRECTION('',(0.,1.));+#17448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17449 = PCURVE('',#17450,#17455);+#17450 = PLANE('',#17451);+#17451 = AXIS2_PLACEMENT_3D('',#17452,#17453,#17454);+#17452 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#17453 = DIRECTION('',(1.,0.,0.));+#17454 = DIRECTION('',(-0.,1.,0.));+#17455 = DEFINITIONAL_REPRESENTATION('',(#17456),#17460);+#17456 = LINE('',#17457,#17458);+#17457 = CARTESIAN_POINT('',(0.345441613228,2.5E-02));+#17458 = VECTOR('',#17459,1.);+#17459 = DIRECTION('',(1.,0.));+#17460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17461 = ORIENTED_EDGE('',*,*,#17462,.F.);+#17462 = EDGE_CURVE('',#17463,#17428,#17465,.T.);+#17463 = VERTEX_POINT('',#17464);+#17464 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.124999999999,-0.1));+#17465 = SURFACE_CURVE('',#17466,(#17470,#17477),.PCURVE_S1.);+#17466 = LINE('',#17467,#17468);+#17467 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.124999999999,-0.1));+#17468 = VECTOR('',#17469,1.);+#17469 = DIRECTION('',(-0.906183139993,0.422885465336,0.));+#17470 = PCURVE('',#17438,#17471);+#17471 = DEFINITIONAL_REPRESENTATION('',(#17472),#17476);+#17472 = LINE('',#17473,#17474);+#17473 = CARTESIAN_POINT('',(-0.52026741126,-0.915763807488));+#17474 = VECTOR('',#17475,1.);+#17475 = DIRECTION('',(-0.906183139993,0.422885465336));+#17476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17477 = PCURVE('',#17478,#17483);+#17478 = PLANE('',#17479);+#17479 = AXIS2_PLACEMENT_3D('',#17480,#17481,#17482);+#17480 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.125,0.));+#17481 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#17482 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#17483 = DEFINITIONAL_REPRESENTATION('',(#17484),#17488);+#17484 = LINE('',#17485,#17486);+#17485 = CARTESIAN_POINT('',(4.228803023163E-13,0.1));+#17486 = VECTOR('',#17487,1.);+#17487 = DIRECTION('',(1.,0.));+#17488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17489 = ORIENTED_EDGE('',*,*,#17490,.T.);+#17490 = EDGE_CURVE('',#17463,#17491,#17493,.T.);+#17491 = VERTEX_POINT('',#17492);+#17492 = CARTESIAN_POINT('',(5.000000002838E-02,-0.125,-0.1));+#17493 = SURFACE_CURVE('',#17494,(#17498,#17505),.PCURVE_S1.);+#17494 = LINE('',#17495,#17496);+#17495 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.124999999999,-0.1));+#17496 = VECTOR('',#17497,1.);+#17497 = DIRECTION('',(1.,-3.033129303099E-12,0.));+#17498 = PCURVE('',#17438,#17499);+#17499 = DEFINITIONAL_REPRESENTATION('',(#17500),#17504);+#17500 = LINE('',#17501,#17502);+#17501 = CARTESIAN_POINT('',(-0.52026741126,-0.915763807488));+#17502 = VECTOR('',#17503,1.);+#17503 = DIRECTION('',(1.,-3.033129303099E-12));+#17504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17505 = PCURVE('',#17506,#17511);+#17506 = PLANE('',#17507);+#17507 = AXIS2_PLACEMENT_3D('',#17508,#17509,#17510);+#17508 = CARTESIAN_POINT('',(-7.499999337597E-02,-0.124999999998,0.));+#17509 = DIRECTION('',(0.,-1.,0.));+#17510 = DIRECTION('',(1.,0.,0.));+#17511 = DEFINITIONAL_REPRESENTATION('',(#17512),#17516);+#17512 = LINE('',#17513,#17514);+#17513 = CARTESIAN_POINT('',(-6.602929994437E-09,-0.1));+#17514 = VECTOR('',#17515,1.);+#17515 = DIRECTION('',(1.,0.));+#17516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17517 = ORIENTED_EDGE('',*,*,#17518,.T.);+#17518 = EDGE_CURVE('',#17491,#17519,#17521,.T.);+#17519 = VERTEX_POINT('',#17520);+#17520 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,-0.1));+#17521 = SURFACE_CURVE('',#17522,(#17526,#17533),.PCURVE_S1.);+#17522 = LINE('',#17523,#17524);+#17523 = CARTESIAN_POINT('',(5.000000002838E-02,-0.125,-0.1));+#17524 = VECTOR('',#17525,1.);+#17525 = DIRECTION('',(0.,-1.,0.));+#17526 = PCURVE('',#17438,#17527);+#17527 = DEFINITIONAL_REPRESENTATION('',(#17528),#17532);+#17528 = LINE('',#17529,#17530);+#17529 = CARTESIAN_POINT('',(-0.395267411253,-0.915763807489));+#17530 = VECTOR('',#17531,1.);+#17531 = DIRECTION('',(0.,-1.));+#17532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17533 = PCURVE('',#17534,#17539);+#17534 = PLANE('',#17535);+#17535 = AXIS2_PLACEMENT_3D('',#17536,#17537,#17538);+#17536 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,0.));+#17537 = DIRECTION('',(-1.,0.,0.));+#17538 = DIRECTION('',(0.,1.,0.));+#17539 = DEFINITIONAL_REPRESENTATION('',(#17540),#17544);+#17540 = LINE('',#17541,#17542);+#17541 = CARTESIAN_POINT('',(0.1,0.1));+#17542 = VECTOR('',#17543,1.);+#17543 = DIRECTION('',(-1.,0.));+#17544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17545 = ORIENTED_EDGE('',*,*,#17546,.T.);+#17546 = EDGE_CURVE('',#17519,#17547,#17549,.T.);+#17547 = VERTEX_POINT('',#17548);+#17548 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,-0.1));+#17549 = SURFACE_CURVE('',#17550,(#17554,#17561),.PCURVE_S1.);+#17550 = LINE('',#17551,#17552);+#17551 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,-0.1));+#17552 = VECTOR('',#17553,1.);+#17553 = DIRECTION('',(1.,6.30868135507E-11,0.));+#17554 = PCURVE('',#17438,#17555);+#17555 = DEFINITIONAL_REPRESENTATION('',(#17556),#17560);+#17556 = LINE('',#17557,#17558);+#17557 = CARTESIAN_POINT('',(-0.395267411253,-1.015763807489));+#17558 = VECTOR('',#17559,1.);+#17559 = DIRECTION('',(1.,6.30868135507E-11));+#17560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17561 = PCURVE('',#17562,#17567);+#17562 = PLANE('',#17563);+#17563 = AXIS2_PLACEMENT_3D('',#17564,#17565,#17566);+#17564 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,0.));+#17565 = DIRECTION('',(6.309619493527E-11,-1.,0.));+#17566 = DIRECTION('',(-1.,-6.309619493527E-11,0.));+#17567 = DEFINITIONAL_REPRESENTATION('',(#17568),#17572);+#17568 = LINE('',#17569,#17570);+#17569 = CARTESIAN_POINT('',(1.000000000004,0.1));+#17570 = VECTOR('',#17571,1.);+#17571 = DIRECTION('',(-1.,0.));+#17572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17573 = ORIENTED_EDGE('',*,*,#17574,.F.);+#17574 = EDGE_CURVE('',#17575,#17547,#17577,.T.);+#17575 = VERTEX_POINT('',#17576);+#17576 = CARTESIAN_POINT('',(1.150000000041,-0.125000000008,-0.1));+#17577 = SURFACE_CURVE('',#17578,(#17583,#17594),.PCURVE_S1.);+#17578 = CIRCLE('',#17579,9.999999999127E-02);+#17579 = AXIS2_PLACEMENT_3D('',#17580,#17581,#17582);+#17580 = CARTESIAN_POINT('',(1.05000000005,-0.124999999946,-0.1));+#17581 = DIRECTION('',(0.,0.,-1.));+#17582 = DIRECTION('',(1.,-6.234508743142E-10,0.));+#17583 = PCURVE('',#17438,#17584);+#17584 = DEFINITIONAL_REPRESENTATION('',(#17585),#17593);+#17585 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17586,#17587,#17588,#17589+    ,#17590,#17591,#17592),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#17586 = CARTESIAN_POINT('',(0.70473258876,-0.915763807497));+#17587 = CARTESIAN_POINT('',(0.704732588652,-1.088968888239));+#17588 = CARTESIAN_POINT('',(0.554732588719,-1.002366347775));+#17589 = CARTESIAN_POINT('',(0.404732588786,-0.91576380731));+#17590 = CARTESIAN_POINT('',(0.554732588827,-0.829161267033));+#17591 = CARTESIAN_POINT('',(0.704732588868,-0.742558726756));+#17592 = CARTESIAN_POINT('',(0.70473258876,-0.915763807497));+#17593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17594 = PCURVE('',#17595,#17600);+#17595 = CYLINDRICAL_SURFACE('',#17596,9.999999999127E-02);+#17596 = AXIS2_PLACEMENT_3D('',#17597,#17598,#17599);+#17597 = CARTESIAN_POINT('',(1.05000000005,-0.124999999946,0.));+#17598 = DIRECTION('',(0.,0.,-1.));+#17599 = DIRECTION('',(1.,1.847411113272E-11,0.));+#17600 = DEFINITIONAL_REPRESENTATION('',(#17601),#17605);+#17601 = LINE('',#17602,#17603);+#17602 = CARTESIAN_POINT('',(0.,0.1));+#17603 = VECTOR('',#17604,1.);+#17604 = DIRECTION('',(1.,0.));+#17605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17606 = ORIENTED_EDGE('',*,*,#17607,.T.);+#17607 = EDGE_CURVE('',#17575,#17608,#17610,.T.);+#17608 = VERTEX_POINT('',#17609);+#17609 = CARTESIAN_POINT('',(1.150000000028,1.724906848558,-0.1));+#17610 = SURFACE_CURVE('',#17611,(#17615,#17622),.PCURVE_S1.);+#17611 = LINE('',#17612,#17613);+#17612 = CARTESIAN_POINT('',(1.150000000037,-0.124999999966,-0.1));+#17613 = VECTOR('',#17614,1.);+#17614 = DIRECTION('',(-4.46584193006E-12,1.,0.));+#17615 = PCURVE('',#17438,#17616);+#17616 = DEFINITIONAL_REPRESENTATION('',(#17617),#17621);+#17617 = LINE('',#17618,#17619);+#17618 = CARTESIAN_POINT('',(0.704732588756,-0.915763807455));+#17619 = VECTOR('',#17620,1.);+#17620 = DIRECTION('',(-4.46584193006E-12,1.));+#17621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17622 = PCURVE('',#17623,#17628);+#17623 = PLANE('',#17624);+#17624 = AXIS2_PLACEMENT_3D('',#17625,#17626,#17627);+#17625 = CARTESIAN_POINT('',(1.150000000034,1.724906848609,0.));+#17626 = DIRECTION('',(1.,0.,0.));+#17627 = DIRECTION('',(0.,-1.,0.));+#17628 = DEFINITIONAL_REPRESENTATION('',(#17629),#17633);+#17629 = LINE('',#17630,#17631);+#17630 = CARTESIAN_POINT('',(1.849906848575,0.1));+#17631 = VECTOR('',#17632,1.);+#17632 = DIRECTION('',(-1.,0.));+#17633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17634 = ORIENTED_EDGE('',*,*,#17635,.F.);+#17635 = EDGE_CURVE('',#17636,#17608,#17638,.T.);+#17636 = VERTEX_POINT('',#17637);+#17637 = CARTESIAN_POINT('',(1.049999999859,1.824906848609,-0.1));+#17638 = SURFACE_CURVE('',#17639,(#17644,#17655),.PCURVE_S1.);+#17639 = CIRCLE('',#17640,0.100000000003);+#17640 = AXIS2_PLACEMENT_3D('',#17641,#17642,#17643);+#17641 = CARTESIAN_POINT('',(1.050000000014,1.724906848606,-0.1));+#17642 = DIRECTION('',(0.,0.,-1.));+#17643 = DIRECTION('',(-1.54604551379E-09,1.,0.));+#17644 = PCURVE('',#17438,#17645);+#17645 = DEFINITIONAL_REPRESENTATION('',(#17646),#17654);+#17646 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17647,#17648,#17649,#17650+    ,#17651,#17652,#17653),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#17647 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#17648 = CARTESIAN_POINT('',(0.77793766934,1.034143041388));+#17649 = CARTESIAN_POINT('',(0.691335129191,0.884143041249));+#17650 = CARTESIAN_POINT('',(0.604732589042,0.734143041111));+#17651 = CARTESIAN_POINT('',(0.518130048429,0.884143040982));+#17652 = CARTESIAN_POINT('',(0.431527507816,1.034143040852));+#17653 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#17654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17655 = PCURVE('',#17656,#17661);+#17656 = CYLINDRICAL_SURFACE('',#17657,0.100000000003);+#17657 = AXIS2_PLACEMENT_3D('',#17658,#17659,#17660);+#17658 = CARTESIAN_POINT('',(1.050000000014,1.724906848606,0.));+#17659 = DIRECTION('',(0.,0.,-1.));+#17660 = DIRECTION('',(0.,1.,0.));+#17661 = DEFINITIONAL_REPRESENTATION('',(#17662),#17666);+#17662 = LINE('',#17663,#17664);+#17663 = CARTESIAN_POINT('',(-1.546045069745E-09,0.1));+#17664 = VECTOR('',#17665,1.);+#17665 = DIRECTION('',(1.,0.));+#17666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17667 = ORIENTED_EDGE('',*,*,#17668,.T.);+#17668 = EDGE_CURVE('',#17636,#17669,#17671,.T.);+#17669 = VERTEX_POINT('',#17670);+#17670 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,-0.1));+#17671 = SURFACE_CURVE('',#17672,(#17676,#17683),.PCURVE_S1.);+#17672 = LINE('',#17673,#17674);+#17673 = CARTESIAN_POINT('',(1.049999999962,1.82490684862,-0.1));+#17674 = VECTOR('',#17675,1.);+#17675 = DIRECTION('',(-1.,-1.178638311891E-11,0.));+#17676 = PCURVE('',#17438,#17677);+#17677 = DEFINITIONAL_REPRESENTATION('',(#17678),#17682);+#17678 = LINE('',#17679,#17680);+#17679 = CARTESIAN_POINT('',(0.604732588681,1.034143041131));+#17680 = VECTOR('',#17681,1.);+#17681 = DIRECTION('',(-1.,-1.178638311891E-11));+#17682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17683 = PCURVE('',#17684,#17689);+#17684 = PLANE('',#17685);+#17685 = AXIS2_PLACEMENT_3D('',#17686,#17687,#17688);+#17686 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,0.));+#17687 = DIRECTION('',(-1.762217382144E-11,1.,0.));+#17688 = DIRECTION('',(1.,1.762217382144E-11,0.));+#17689 = DEFINITIONAL_REPRESENTATION('',(#17690),#17694);+#17690 = LINE('',#17691,#17692);+#17691 = CARTESIAN_POINT('',(0.999959484255,0.1));+#17692 = VECTOR('',#17693,1.);+#17693 = DIRECTION('',(-1.,-0.));+#17694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17695 = ORIENTED_EDGE('',*,*,#17696,.T.);+#17696 = EDGE_CURVE('',#17669,#17697,#17699,.T.);+#17697 = VERTEX_POINT('',#17698);+#17698 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000001,-0.1));+#17699 = SURFACE_CURVE('',#17700,(#17704,#17711),.PCURVE_S1.);+#17700 = LINE('',#17701,#17702);+#17701 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,-0.1));+#17702 = VECTOR('',#17703,1.);+#17703 = DIRECTION('',(-2.026727863385E-04,-0.999999979462,0.));+#17704 = PCURVE('',#17438,#17705);+#17705 = DEFINITIONAL_REPRESENTATION('',(#17706),#17710);+#17706 = LINE('',#17707,#17708);+#17707 = CARTESIAN_POINT('',(-0.395226895574,1.03414304112));+#17708 = VECTOR('',#17709,1.);+#17709 = DIRECTION('',(-2.026727863385E-04,-0.999999979462));+#17710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17711 = PCURVE('',#17712,#17717);+#17712 = PLANE('',#17713);+#17713 = AXIS2_PLACEMENT_3D('',#17714,#17715,#17716);+#17714 = CARTESIAN_POINT('',(5.000000002838E-02,1.625,0.));+#17715 = DIRECTION('',(-0.999999979462,2.026727863372E-04,0.));+#17716 = DIRECTION('',(2.026727863372E-04,0.999999979462,0.));+#17717 = DEFINITIONAL_REPRESENTATION('',(#17718),#17722);+#17718 = LINE('',#17719,#17720);+#17719 = CARTESIAN_POINT('',(0.199906852715,0.1));+#17720 = VECTOR('',#17721,1.);+#17721 = DIRECTION('',(-1.,-0.));+#17722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17723 = ORIENTED_EDGE('',*,*,#17724,.T.);+#17724 = EDGE_CURVE('',#17697,#17725,#17727,.T.);+#17725 = VERTEX_POINT('',#17726);+#17726 = CARTESIAN_POINT('',(-7.49999999789E-02,1.625000000001,-0.1));+#17727 = SURFACE_CURVE('',#17728,(#17732,#17739),.PCURVE_S1.);+#17728 = LINE('',#17729,#17730);+#17729 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000001,-0.1));+#17730 = VECTOR('',#17731,1.);+#17731 = DIRECTION('',(-1.,-3.035793838358E-12,0.));+#17732 = PCURVE('',#17438,#17733);+#17733 = DEFINITIONAL_REPRESENTATION('',(#17734),#17738);+#17734 = LINE('',#17735,#17736);+#17735 = CARTESIAN_POINT('',(-0.395267411253,0.834236192512));+#17736 = VECTOR('',#17737,1.);+#17737 = DIRECTION('',(-1.,-3.035793838358E-12));+#17738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17739 = PCURVE('',#17740,#17745);+#17740 = PLANE('',#17741);+#17741 = AXIS2_PLACEMENT_3D('',#17742,#17743,#17744);+#17742 = CARTESIAN_POINT('',(6.621121428907E-09,1.625000000004,0.));+#17743 = DIRECTION('',(0.,1.,0.));+#17744 = DIRECTION('',(-1.,0.,0.));+#17745 = DEFINITIONAL_REPRESENTATION('',(#17746),#17750);+#17746 = LINE('',#17747,#17748);+#17747 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#17748 = VECTOR('',#17749,1.);+#17749 = DIRECTION('',(1.,0.));+#17750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17751 = ORIENTED_EDGE('',*,*,#17752,.F.);+#17752 = EDGE_CURVE('',#17753,#17725,#17755,.T.);+#17753 = VERTEX_POINT('',#17754);+#17754 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,-0.1));+#17755 = SURFACE_CURVE('',#17756,(#17760,#17767),.PCURVE_S1.);+#17756 = LINE('',#17757,#17758);+#17757 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,-0.1));+#17758 = VECTOR('',#17759,1.);+#17759 = DIRECTION('',(0.906183139984,0.422885465355,0.));+#17760 = PCURVE('',#17438,#17761);+#17761 = DEFINITIONAL_REPRESENTATION('',(#17762),#17766);+#17762 = LINE('',#17763,#17764);+#17763 = CARTESIAN_POINT('',(-0.594729450677,0.799487240781));+#17764 = VECTOR('',#17765,1.);+#17765 = DIRECTION('',(0.906183139984,0.422885465355));+#17766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17767 = PCURVE('',#17768,#17773);+#17768 = PLANE('',#17769);+#17769 = AXIS2_PLACEMENT_3D('',#17770,#17771,#17772);+#17770 = CARTESIAN_POINT('',(-0.149999999976,1.59,0.));+#17771 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#17772 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#17773 = DEFINITIONAL_REPRESENTATION('',(#17774),#17778);+#17774 = LINE('',#17775,#17776);+#17775 = CARTESIAN_POINT('',(5.936554720576E-04,0.1));+#17776 = VECTOR('',#17777,1.);+#17777 = DIRECTION('',(1.,0.));+#17778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17779 = ORIENTED_EDGE('',*,*,#17780,.F.);+#17780 = EDGE_CURVE('',#17781,#17753,#17783,.T.);+#17781 = VERTEX_POINT('',#17782);+#17782 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,-0.1));+#17783 = SURFACE_CURVE('',#17784,(#17788,#17795),.PCURVE_S1.);+#17784 = LINE('',#17785,#17786);+#17785 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,-0.1));+#17786 = VECTOR('',#17787,1.);+#17787 = DIRECTION('',(0.,1.,0.));+#17788 = PCURVE('',#17438,#17789);+#17789 = DEFINITIONAL_REPRESENTATION('',(#17790),#17794);+#17790 = LINE('',#17791,#17792);+#17791 = CARTESIAN_POINT('',(-0.594729450677,0.61898514424));+#17792 = VECTOR('',#17793,1.);+#17793 = DIRECTION('',(0.,1.));+#17794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17795 = PCURVE('',#17796,#17801);+#17796 = PLANE('',#17797);+#17797 = AXIS2_PLACEMENT_3D('',#17798,#17799,#17800);+#17798 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#17799 = DIRECTION('',(1.,0.,0.));+#17800 = DIRECTION('',(-0.,1.,0.));+#17801 = DEFINITIONAL_REPRESENTATION('',(#17802),#17806);+#17802 = LINE('',#17803,#17804);+#17803 = CARTESIAN_POINT('',(1.845441613228,2.5E-02));+#17804 = VECTOR('',#17805,1.);+#17805 = DIRECTION('',(1.,0.));+#17806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17807 = ORIENTED_EDGE('',*,*,#17808,.F.);+#17808 = EDGE_CURVE('',#17809,#17781,#17811,.T.);+#17809 = VERTEX_POINT('',#17810);+#17810 = CARTESIAN_POINT('',(-7.49999999789E-02,1.374999999999,-0.1));+#17811 = SURFACE_CURVE('',#17812,(#17816,#17823),.PCURVE_S1.);+#17812 = LINE('',#17813,#17814);+#17813 = CARTESIAN_POINT('',(-7.49999999789E-02,1.374999999999,-0.1));+#17814 = VECTOR('',#17815,1.);+#17815 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#17816 = PCURVE('',#17438,#17817);+#17817 = DEFINITIONAL_REPRESENTATION('',(#17818),#17822);+#17818 = LINE('',#17819,#17820);+#17819 = CARTESIAN_POINT('',(-0.52026741126,0.58423619251));+#17820 = VECTOR('',#17821,1.);+#17821 = DIRECTION('',(-0.906183139987,0.422885465348));+#17822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17823 = PCURVE('',#17824,#17829);+#17824 = PLANE('',#17825);+#17825 = AXIS2_PLACEMENT_3D('',#17826,#17827,#17828);+#17826 = CARTESIAN_POINT('',(-7.49999999789E-02,1.375,0.));+#17827 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#17828 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#17829 = DEFINITIONAL_REPRESENTATION('',(#17830),#17834);+#17830 = LINE('',#17831,#17832);+#17831 = CARTESIAN_POINT('',(-4.228828174798E-13,0.1));+#17832 = VECTOR('',#17833,1.);+#17833 = DIRECTION('',(1.,0.));+#17834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17835 = ORIENTED_EDGE('',*,*,#17836,.T.);+#17836 = EDGE_CURVE('',#17809,#17837,#17839,.T.);+#17837 = VERTEX_POINT('',#17838);+#17838 = CARTESIAN_POINT('',(5.000000002838E-02,1.374999999999,-0.1));+#17839 = SURFACE_CURVE('',#17840,(#17844,#17851),.PCURVE_S1.);+#17840 = LINE('',#17841,#17842);+#17841 = CARTESIAN_POINT('',(-7.49999999789E-02,1.374999999999,-0.1));+#17842 = VECTOR('',#17843,1.);+#17843 = DIRECTION('',(1.,0.,0.));+#17844 = PCURVE('',#17438,#17845);+#17845 = DEFINITIONAL_REPRESENTATION('',(#17846),#17850);+#17846 = LINE('',#17847,#17848);+#17847 = CARTESIAN_POINT('',(-0.52026741126,0.58423619251));+#17848 = VECTOR('',#17849,1.);+#17849 = DIRECTION('',(1.,0.));+#17850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17851 = PCURVE('',#17852,#17857);+#17852 = PLANE('',#17853);+#17853 = AXIS2_PLACEMENT_3D('',#17854,#17855,#17856);+#17854 = CARTESIAN_POINT('',(-7.499999337597E-02,1.374999999998,0.));+#17855 = DIRECTION('',(0.,-1.,0.));+#17856 = DIRECTION('',(1.,0.,0.));+#17857 = DEFINITIONAL_REPRESENTATION('',(#17858),#17862);+#17858 = LINE('',#17859,#17860);+#17859 = CARTESIAN_POINT('',(-6.602929994437E-09,-0.1));+#17860 = VECTOR('',#17861,1.);+#17861 = DIRECTION('',(1.,0.));+#17862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17863 = ORIENTED_EDGE('',*,*,#17864,.T.);+#17864 = EDGE_CURVE('',#17837,#17865,#17867,.T.);+#17865 = VERTEX_POINT('',#17866);+#17866 = CARTESIAN_POINT('',(5.000000002838E-02,1.125,-0.1));+#17867 = SURFACE_CURVE('',#17868,(#17872,#17879),.PCURVE_S1.);+#17868 = LINE('',#17869,#17870);+#17869 = CARTESIAN_POINT('',(5.000000002838E-02,1.374999999999,-0.1));+#17870 = VECTOR('',#17871,1.);+#17871 = DIRECTION('',(0.,-1.,0.));+#17872 = PCURVE('',#17438,#17873);+#17873 = DEFINITIONAL_REPRESENTATION('',(#17874),#17878);+#17874 = LINE('',#17875,#17876);+#17875 = CARTESIAN_POINT('',(-0.395267411253,0.58423619251));+#17876 = VECTOR('',#17877,1.);+#17877 = DIRECTION('',(0.,-1.));+#17878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17879 = PCURVE('',#17880,#17885);+#17880 = PLANE('',#17881);+#17881 = AXIS2_PLACEMENT_3D('',#17882,#17883,#17884);+#17882 = CARTESIAN_POINT('',(5.000000002838E-02,1.125,0.));+#17883 = DIRECTION('',(-1.,0.,0.));+#17884 = DIRECTION('',(0.,1.,0.));+#17885 = DEFINITIONAL_REPRESENTATION('',(#17886),#17890);+#17886 = LINE('',#17887,#17888);+#17887 = CARTESIAN_POINT('',(0.249999999999,0.1));+#17888 = VECTOR('',#17889,1.);+#17889 = DIRECTION('',(-1.,0.));+#17890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17891 = ORIENTED_EDGE('',*,*,#17892,.T.);+#17892 = EDGE_CURVE('',#17865,#17893,#17895,.T.);+#17893 = VERTEX_POINT('',#17894);+#17894 = CARTESIAN_POINT('',(-7.499999997889E-02,1.125,-0.1));+#17895 = SURFACE_CURVE('',#17896,(#17900,#17907),.PCURVE_S1.);+#17896 = LINE('',#17897,#17898);+#17897 = CARTESIAN_POINT('',(5.000000002838E-02,1.125,-0.1));+#17898 = VECTOR('',#17899,1.);+#17899 = DIRECTION('',(-1.,-1.776356839297E-14,0.));+#17900 = PCURVE('',#17438,#17901);+#17901 = DEFINITIONAL_REPRESENTATION('',(#17902),#17906);+#17902 = LINE('',#17903,#17904);+#17903 = CARTESIAN_POINT('',(-0.395267411253,0.334236192511));+#17904 = VECTOR('',#17905,1.);+#17905 = DIRECTION('',(-1.,-1.776356839297E-14));+#17906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17907 = PCURVE('',#17908,#17913);+#17908 = PLANE('',#17909);+#17909 = AXIS2_PLACEMENT_3D('',#17910,#17911,#17912);+#17910 = CARTESIAN_POINT('',(6.621121428907E-09,1.125000000002,0.));+#17911 = DIRECTION('',(0.,1.,0.));+#17912 = DIRECTION('',(-1.,0.,0.));+#17913 = DEFINITIONAL_REPRESENTATION('',(#17914),#17918);+#17914 = LINE('',#17915,#17916);+#17915 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#17916 = VECTOR('',#17917,1.);+#17917 = DIRECTION('',(1.,0.));+#17918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17919 = ORIENTED_EDGE('',*,*,#17920,.F.);+#17920 = EDGE_CURVE('',#17921,#17893,#17923,.T.);+#17921 = VERTEX_POINT('',#17922);+#17922 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,-0.1));+#17923 = SURFACE_CURVE('',#17924,(#17928,#17935),.PCURVE_S1.);+#17924 = LINE('',#17925,#17926);+#17925 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,-0.1));+#17926 = VECTOR('',#17927,1.);+#17927 = DIRECTION('',(0.906183139987,0.42288546535,0.));+#17928 = PCURVE('',#17438,#17929);+#17929 = DEFINITIONAL_REPRESENTATION('',(#17930),#17934);+#17930 = LINE('',#17931,#17932);+#17931 = CARTESIAN_POINT('',(-0.594729450677,0.299487240781));+#17932 = VECTOR('',#17933,1.);+#17933 = DIRECTION('',(0.906183139987,0.42288546535));+#17934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17935 = PCURVE('',#17936,#17941);+#17936 = PLANE('',#17937);+#17937 = AXIS2_PLACEMENT_3D('',#17938,#17939,#17940);+#17938 = CARTESIAN_POINT('',(-0.149999999976,1.09,0.));+#17939 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#17940 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#17941 = DEFINITIONAL_REPRESENTATION('',(#17942),#17946);+#17942 = LINE('',#17943,#17944);+#17943 = CARTESIAN_POINT('',(5.936554720576E-04,0.1));+#17944 = VECTOR('',#17945,1.);+#17945 = DIRECTION('',(1.,0.));+#17946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17947 = ORIENTED_EDGE('',*,*,#17948,.F.);+#17948 = EDGE_CURVE('',#17949,#17921,#17951,.T.);+#17949 = VERTEX_POINT('',#17950);+#17950 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,-0.1));+#17951 = SURFACE_CURVE('',#17952,(#17956,#17963),.PCURVE_S1.);+#17952 = LINE('',#17953,#17954);+#17953 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,-0.1));+#17954 = VECTOR('',#17955,1.);+#17955 = DIRECTION('',(0.,1.,0.));+#17956 = PCURVE('',#17438,#17957);+#17957 = DEFINITIONAL_REPRESENTATION('',(#17958),#17962);+#17958 = LINE('',#17959,#17960);+#17959 = CARTESIAN_POINT('',(-0.594729450677,0.118985144241));+#17960 = VECTOR('',#17961,1.);+#17961 = DIRECTION('',(0.,1.));+#17962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17963 = PCURVE('',#17964,#17969);+#17964 = PLANE('',#17965);+#17965 = AXIS2_PLACEMENT_3D('',#17966,#17967,#17968);+#17966 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#17967 = DIRECTION('',(1.,0.,0.));+#17968 = DIRECTION('',(-0.,1.,0.));+#17969 = DEFINITIONAL_REPRESENTATION('',(#17970),#17974);+#17970 = LINE('',#17971,#17972);+#17971 = CARTESIAN_POINT('',(1.345441613229,2.5E-02));+#17972 = VECTOR('',#17973,1.);+#17973 = DIRECTION('',(1.,0.));+#17974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17975 = ORIENTED_EDGE('',*,*,#17976,.F.);+#17976 = EDGE_CURVE('',#17977,#17949,#17979,.T.);+#17977 = VERTEX_POINT('',#17978);+#17978 = CARTESIAN_POINT('',(-7.49999999789E-02,0.874999999999,-0.1));+#17979 = SURFACE_CURVE('',#17980,(#17984,#17991),.PCURVE_S1.);+#17980 = LINE('',#17981,#17982);+#17981 = CARTESIAN_POINT('',(-7.49999999789E-02,0.874999999999,-0.1));+#17982 = VECTOR('',#17983,1.);+#17983 = DIRECTION('',(-0.906183139982,0.422885465359,0.));+#17984 = PCURVE('',#17438,#17985);+#17985 = DEFINITIONAL_REPRESENTATION('',(#17986),#17990);+#17986 = LINE('',#17987,#17988);+#17987 = CARTESIAN_POINT('',(-0.52026741126,8.423619251E-02));+#17988 = VECTOR('',#17989,1.);+#17989 = DIRECTION('',(-0.906183139982,0.422885465359));+#17990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#17991 = PCURVE('',#17992,#17997);+#17992 = PLANE('',#17993);+#17993 = AXIS2_PLACEMENT_3D('',#17994,#17995,#17996);+#17994 = CARTESIAN_POINT('',(-7.49999999789E-02,0.875,0.));+#17995 = DIRECTION('',(-0.422885465348,-0.906183139987,0.));+#17996 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#17997 = DEFINITIONAL_REPRESENTATION('',(#17998),#18002);+#17998 = LINE('',#17999,#18000);+#17999 = CARTESIAN_POINT('',(-4.228920397458E-13,0.1));+#18000 = VECTOR('',#18001,1.);+#18001 = DIRECTION('',(1.,0.));+#18002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18003 = ORIENTED_EDGE('',*,*,#18004,.T.);+#18004 = EDGE_CURVE('',#17977,#18005,#18007,.T.);+#18005 = VERTEX_POINT('',#18006);+#18006 = CARTESIAN_POINT('',(5.000000002838E-02,0.874999999999,-0.1));+#18007 = SURFACE_CURVE('',#18008,(#18012,#18019),.PCURVE_S1.);+#18008 = LINE('',#18009,#18010);+#18009 = CARTESIAN_POINT('',(-7.49999999789E-02,0.874999999999,-0.1));+#18010 = VECTOR('',#18011,1.);+#18011 = DIRECTION('',(1.,0.,0.));+#18012 = PCURVE('',#17438,#18013);+#18013 = DEFINITIONAL_REPRESENTATION('',(#18014),#18018);+#18014 = LINE('',#18015,#18016);+#18015 = CARTESIAN_POINT('',(-0.52026741126,8.423619251E-02));+#18016 = VECTOR('',#18017,1.);+#18017 = DIRECTION('',(1.,0.));+#18018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18019 = PCURVE('',#18020,#18025);+#18020 = PLANE('',#18021);+#18021 = AXIS2_PLACEMENT_3D('',#18022,#18023,#18024);+#18022 = CARTESIAN_POINT('',(-7.499999337597E-02,0.874999999996,0.));+#18023 = DIRECTION('',(0.,-1.,0.));+#18024 = DIRECTION('',(1.,0.,0.));+#18025 = DEFINITIONAL_REPRESENTATION('',(#18026),#18030);+#18026 = LINE('',#18027,#18028);+#18027 = CARTESIAN_POINT('',(-6.602929994437E-09,-0.1));+#18028 = VECTOR('',#18029,1.);+#18029 = DIRECTION('',(1.,0.));+#18030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18031 = ORIENTED_EDGE('',*,*,#18032,.T.);+#18032 = EDGE_CURVE('',#18005,#18033,#18035,.T.);+#18033 = VERTEX_POINT('',#18034);+#18034 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,-0.1));+#18035 = SURFACE_CURVE('',#18036,(#18040,#18047),.PCURVE_S1.);+#18036 = LINE('',#18037,#18038);+#18037 = CARTESIAN_POINT('',(5.000000002838E-02,0.874999999999,-0.1));+#18038 = VECTOR('',#18039,1.);+#18039 = DIRECTION('',(0.,-1.,0.));+#18040 = PCURVE('',#17438,#18041);+#18041 = DEFINITIONAL_REPRESENTATION('',(#18042),#18046);+#18042 = LINE('',#18043,#18044);+#18043 = CARTESIAN_POINT('',(-0.395267411253,8.423619251E-02));+#18044 = VECTOR('',#18045,1.);+#18045 = DIRECTION('',(0.,-1.));+#18046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18047 = PCURVE('',#18048,#18053);+#18048 = PLANE('',#18049);+#18049 = AXIS2_PLACEMENT_3D('',#18050,#18051,#18052);+#18050 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#18051 = DIRECTION('',(-1.,0.,0.));+#18052 = DIRECTION('',(0.,1.,0.));+#18053 = DEFINITIONAL_REPRESENTATION('',(#18054),#18058);+#18054 = LINE('',#18055,#18056);+#18055 = CARTESIAN_POINT('',(0.249999999999,0.1));+#18056 = VECTOR('',#18057,1.);+#18057 = DIRECTION('',(-1.,0.));+#18058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18059 = ORIENTED_EDGE('',*,*,#18060,.T.);+#18060 = EDGE_CURVE('',#18033,#18061,#18063,.T.);+#18061 = VERTEX_POINT('',#18062);+#18062 = CARTESIAN_POINT('',(-7.49999999789E-02,0.625,-0.1));+#18063 = SURFACE_CURVE('',#18064,(#18068,#18075),.PCURVE_S1.);+#18064 = LINE('',#18065,#18066);+#18065 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,-0.1));+#18066 = VECTOR('',#18067,1.);+#18067 = DIRECTION('',(-1.,0.,0.));+#18068 = PCURVE('',#17438,#18069);+#18069 = DEFINITIONAL_REPRESENTATION('',(#18070),#18074);+#18070 = LINE('',#18071,#18072);+#18071 = CARTESIAN_POINT('',(-0.395267411253,-0.165763807489));+#18072 = VECTOR('',#18073,1.);+#18073 = DIRECTION('',(-1.,0.));+#18074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18075 = PCURVE('',#18076,#18081);+#18076 = PLANE('',#18077);+#18077 = AXIS2_PLACEMENT_3D('',#18078,#18079,#18080);+#18078 = CARTESIAN_POINT('',(6.621121428907E-09,0.625,0.));+#18079 = DIRECTION('',(0.,1.,0.));+#18080 = DIRECTION('',(-1.,0.,0.));+#18081 = DEFINITIONAL_REPRESENTATION('',(#18082),#18086);+#18082 = LINE('',#18083,#18084);+#18083 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#18084 = VECTOR('',#18085,1.);+#18085 = DIRECTION('',(1.,0.));+#18086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18087 = ORIENTED_EDGE('',*,*,#18088,.F.);+#18088 = EDGE_CURVE('',#18089,#18061,#18091,.T.);+#18089 = VERTEX_POINT('',#18090);+#18090 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,-0.1));+#18091 = SURFACE_CURVE('',#18092,(#18096,#18103),.PCURVE_S1.);+#18092 = LINE('',#18093,#18094);+#18093 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,-0.1));+#18094 = VECTOR('',#18095,1.);+#18095 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#18096 = PCURVE('',#17438,#18097);+#18097 = DEFINITIONAL_REPRESENTATION('',(#18098),#18102);+#18098 = LINE('',#18099,#18100);+#18099 = CARTESIAN_POINT('',(-0.594729450677,-0.200512759219));+#18100 = VECTOR('',#18101,1.);+#18101 = DIRECTION('',(0.906183139987,0.422885465348));+#18102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18103 = PCURVE('',#18104,#18109);+#18104 = PLANE('',#18105);+#18105 = AXIS2_PLACEMENT_3D('',#18106,#18107,#18108);+#18106 = CARTESIAN_POINT('',(-0.149999999976,0.59,0.));+#18107 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#18108 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#18109 = DEFINITIONAL_REPRESENTATION('',(#18110),#18114);+#18110 = LINE('',#18111,#18112);+#18111 = CARTESIAN_POINT('',(5.936554720576E-04,0.1));+#18112 = VECTOR('',#18113,1.);+#18113 = DIRECTION('',(1.,0.));+#18114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18115 = ORIENTED_EDGE('',*,*,#18116,.F.);+#18116 = EDGE_CURVE('',#18117,#18089,#18119,.T.);+#18117 = VERTEX_POINT('',#18118);+#18118 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,-0.1));+#18119 = SURFACE_CURVE('',#18120,(#18124,#18131),.PCURVE_S1.);+#18120 = LINE('',#18121,#18122);+#18121 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,-0.1));+#18122 = VECTOR('',#18123,1.);+#18123 = DIRECTION('',(0.,1.,0.));+#18124 = PCURVE('',#17438,#18125);+#18125 = DEFINITIONAL_REPRESENTATION('',(#18126),#18130);+#18126 = LINE('',#18127,#18128);+#18127 = CARTESIAN_POINT('',(-0.594729450677,-0.381014852668));+#18128 = VECTOR('',#18129,1.);+#18129 = DIRECTION('',(0.,1.));+#18130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18131 = PCURVE('',#18132,#18137);+#18132 = PLANE('',#18133);+#18133 = AXIS2_PLACEMENT_3D('',#18134,#18135,#18136);+#18134 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#18135 = DIRECTION('',(1.,0.,0.));+#18136 = DIRECTION('',(-0.,1.,0.));+#18137 = DEFINITIONAL_REPRESENTATION('',(#18138),#18142);+#18138 = LINE('',#18139,#18140);+#18139 = CARTESIAN_POINT('',(0.84544161632,2.5E-02));+#18140 = VECTOR('',#18141,1.);+#18141 = DIRECTION('',(1.,0.));+#18142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18143 = ORIENTED_EDGE('',*,*,#18144,.F.);+#18144 = EDGE_CURVE('',#18145,#18117,#18147,.T.);+#18145 = VERTEX_POINT('',#18146);+#18146 = CARTESIAN_POINT('',(-7.499999958486E-02,0.375000000846,-0.1));+#18147 = SURFACE_CURVE('',#18148,(#18152,#18159),.PCURVE_S1.);+#18148 = LINE('',#18149,#18150);+#18149 = CARTESIAN_POINT('',(-7.499999958486E-02,0.375000000846,-0.1));+#18150 = VECTOR('',#18151,1.);+#18151 = DIRECTION('',(-0.906183130373,0.42288548595,0.));+#18152 = PCURVE('',#17438,#18153);+#18153 = DEFINITIONAL_REPRESENTATION('',(#18154),#18158);+#18154 = LINE('',#18155,#18156);+#18155 = CARTESIAN_POINT('',(-0.520267410866,-0.415763806643));+#18156 = VECTOR('',#18157,1.);+#18157 = DIRECTION('',(-0.906183130373,0.42288548595));+#18158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18159 = PCURVE('',#18160,#18165);+#18160 = PLANE('',#18161);+#18161 = AXIS2_PLACEMENT_3D('',#18162,#18163,#18164);+#18162 = CARTESIAN_POINT('',(-0.149999993355,0.410000000002,0.));+#18163 = DIRECTION('',(-0.422885465409,-0.906183139959,0.));+#18164 = DIRECTION('',(0.906183139959,-0.422885465409,0.));+#18165 = DEFINITIONAL_REPRESENTATION('',(#18166),#18170);+#18166 = LINE('',#18167,#18168);+#18167 = CARTESIAN_POINT('',(8.276472078392E-02,-0.1));+#18168 = VECTOR('',#18169,1.);+#18169 = DIRECTION('',(-1.,0.));+#18170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18171 = ORIENTED_EDGE('',*,*,#18172,.T.);+#18172 = EDGE_CURVE('',#18145,#18173,#18175,.T.);+#18173 = VERTEX_POINT('',#18174);+#18174 = CARTESIAN_POINT('',(5.000000002838E-02,0.375000000001,-0.1));+#18175 = SURFACE_CURVE('',#18176,(#18180,#18187),.PCURVE_S1.);+#18176 = LINE('',#18177,#18178);+#18177 = CARTESIAN_POINT('',(-7.499999958486E-02,0.375000000846,-0.1));+#18178 = VECTOR('',#18179,1.);+#18179 = DIRECTION('',(1.,-6.758019942359E-09,0.));+#18180 = PCURVE('',#17438,#18181);+#18181 = DEFINITIONAL_REPRESENTATION('',(#18182),#18186);+#18182 = LINE('',#18183,#18184);+#18183 = CARTESIAN_POINT('',(-0.520267410866,-0.415763806643));+#18184 = VECTOR('',#18185,1.);+#18185 = DIRECTION('',(1.,-6.758019942359E-09));+#18186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18187 = PCURVE('',#18188,#18193);+#18188 = PLANE('',#18189);+#18189 = AXIS2_PLACEMENT_3D('',#18190,#18191,#18192);+#18190 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#18191 = DIRECTION('',(0.,-1.,0.));+#18192 = DIRECTION('',(1.,0.,0.));+#18193 = DEFINITIONAL_REPRESENTATION('',(#18194),#18198);+#18194 = LINE('',#18195,#18196);+#18195 = CARTESIAN_POINT('',(-6.20888999936E-09,-0.1));+#18196 = VECTOR('',#18197,1.);+#18197 = DIRECTION('',(1.,0.));+#18198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18199 = ORIENTED_EDGE('',*,*,#18200,.T.);+#18200 = EDGE_CURVE('',#18173,#18201,#18203,.T.);+#18201 = VERTEX_POINT('',#18202);+#18202 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999999,-0.1));+#18203 = SURFACE_CURVE('',#18204,(#18208,#18215),.PCURVE_S1.);+#18204 = LINE('',#18205,#18206);+#18205 = CARTESIAN_POINT('',(5.000000002838E-02,0.375000000001,-0.1));+#18206 = VECTOR('',#18207,1.);+#18207 = DIRECTION('',(0.,-1.,0.));+#18208 = PCURVE('',#17438,#18209);+#18209 = DEFINITIONAL_REPRESENTATION('',(#18210),#18214);+#18210 = LINE('',#18211,#18212);+#18211 = CARTESIAN_POINT('',(-0.395267411253,-0.415763807488));+#18212 = VECTOR('',#18213,1.);+#18213 = DIRECTION('',(0.,-1.));+#18214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18215 = PCURVE('',#18216,#18221);+#18216 = PLANE('',#18217);+#18217 = AXIS2_PLACEMENT_3D('',#18218,#18219,#18220);+#18218 = CARTESIAN_POINT('',(5.000000002838E-02,0.125,0.));+#18219 = DIRECTION('',(-1.,0.,0.));+#18220 = DIRECTION('',(0.,1.,0.));+#18221 = DEFINITIONAL_REPRESENTATION('',(#18222),#18226);+#18222 = LINE('',#18223,#18224);+#18223 = CARTESIAN_POINT('',(0.250000000001,0.1));+#18224 = VECTOR('',#18225,1.);+#18225 = DIRECTION('',(-1.,0.));+#18226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18227 = ORIENTED_EDGE('',*,*,#18228,.T.);+#18228 = EDGE_CURVE('',#18201,#18229,#18231,.T.);+#18229 = VERTEX_POINT('',#18230);+#18230 = CARTESIAN_POINT('',(-7.49999999789E-02,0.124999999999,-0.1));+#18231 = SURFACE_CURVE('',#18232,(#18236,#18243),.PCURVE_S1.);+#18232 = LINE('',#18233,#18234);+#18233 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999999,-0.1));+#18234 = VECTOR('',#18235,1.);+#18235 = DIRECTION('',(-1.,0.,0.));+#18236 = PCURVE('',#17438,#18237);+#18237 = DEFINITIONAL_REPRESENTATION('',(#18238),#18242);+#18238 = LINE('',#18239,#18240);+#18239 = CARTESIAN_POINT('',(-0.395267411253,-0.66576380749));+#18240 = VECTOR('',#18241,1.);+#18241 = DIRECTION('',(-1.,0.));+#18242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18243 = PCURVE('',#18244,#18249);+#18244 = PLANE('',#18245);+#18245 = AXIS2_PLACEMENT_3D('',#18246,#18247,#18248);+#18246 = CARTESIAN_POINT('',(6.621121428907E-09,0.124999999998,0.));+#18247 = DIRECTION('',(0.,1.,0.));+#18248 = DIRECTION('',(-1.,0.,0.));+#18249 = DEFINITIONAL_REPRESENTATION('',(#18250),#18254);+#18250 = LINE('',#18251,#18252);+#18251 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#18252 = VECTOR('',#18253,1.);+#18253 = DIRECTION('',(1.,0.));+#18254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18255 = ORIENTED_EDGE('',*,*,#18256,.F.);+#18256 = EDGE_CURVE('',#17430,#18229,#18257,.T.);+#18257 = SURFACE_CURVE('',#18258,(#18262,#18269),.PCURVE_S1.);+#18258 = LINE('',#18259,#18260);+#18259 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,-0.1));+#18260 = VECTOR('',#18261,1.);+#18261 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#18262 = PCURVE('',#17438,#18263);+#18263 = DEFINITIONAL_REPRESENTATION('',(#18264),#18268);+#18264 = LINE('',#18265,#18266);+#18265 = CARTESIAN_POINT('',(-0.594729450677,-0.700512759219));+#18266 = VECTOR('',#18267,1.);+#18267 = DIRECTION('',(0.90618313999,0.422885465342));+#18268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18269 = PCURVE('',#18270,#18275);+#18270 = PLANE('',#18271);+#18271 = AXIS2_PLACEMENT_3D('',#18272,#18273,#18274);+#18272 = CARTESIAN_POINT('',(-0.149999999976,8.999999999958E-02,0.));+#18273 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#18274 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#18275 = DEFINITIONAL_REPRESENTATION('',(#18276),#18280);+#18276 = LINE('',#18277,#18278);+#18277 = CARTESIAN_POINT('',(5.936554722648E-04,0.1));+#18278 = VECTOR('',#18279,1.);+#18279 = DIRECTION('',(1.,0.));+#18280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18281 = ADVANCED_FACE('',(#18282),#17450,.F.);+#18282 = FACE_BOUND('',#18283,.F.);+#18283 = EDGE_LOOP('',(#18284,#18314,#18335,#18336,#18359,#18382,#18410,+    #18438));+#18284 = ORIENTED_EDGE('',*,*,#18285,.F.);+#18285 = EDGE_CURVE('',#18286,#18288,#18290,.T.);+#18286 = VERTEX_POINT('',#18287);+#18287 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,0.));+#18288 = VERTEX_POINT('',#18289);+#18289 = CARTESIAN_POINT('',(-0.149462039396,-3.970874344617E-02,0.));+#18290 = SURFACE_CURVE('',#18291,(#18295,#18302),.PCURVE_S1.);+#18291 = LINE('',#18292,#18293);+#18292 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,0.));+#18293 = VECTOR('',#18294,1.);+#18294 = DIRECTION('',(0.,1.,0.));+#18295 = PCURVE('',#17450,#18296);+#18296 = DEFINITIONAL_REPRESENTATION('',(#18297),#18301);+#18297 = LINE('',#18298,#18299);+#18298 = CARTESIAN_POINT('',(0.345441613228,0.125));+#18299 = VECTOR('',#18300,1.);+#18300 = DIRECTION('',(1.,0.));+#18301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18302 = PCURVE('',#18303,#18308);+#18303 = PLANE('',#18304);+#18304 = AXIS2_PLACEMENT_3D('',#18305,#18306,#18307);+#18305 = CARTESIAN_POINT('',(0.445267411281,0.790763807489,0.));+#18306 = DIRECTION('',(0.,0.,1.));+#18307 = DIRECTION('',(1.,0.,-0.));+#18308 = DEFINITIONAL_REPRESENTATION('',(#18309),#18313);+#18309 = LINE('',#18310,#18311);+#18310 = CARTESIAN_POINT('',(-0.594729450677,-0.88101485576));+#18311 = VECTOR('',#18312,1.);+#18312 = DIRECTION('',(0.,1.));+#18313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18314 = ORIENTED_EDGE('',*,*,#18315,.T.);+#18315 = EDGE_CURVE('',#18286,#17428,#18316,.T.);+#18316 = SURFACE_CURVE('',#18317,(#18321,#18328),.PCURVE_S1.);+#18317 = LINE('',#18318,#18319);+#18318 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,0.));+#18319 = VECTOR('',#18320,1.);+#18320 = DIRECTION('',(0.,0.,-1.));+#18321 = PCURVE('',#17450,#18322);+#18322 = DEFINITIONAL_REPRESENTATION('',(#18323),#18327);+#18323 = LINE('',#18324,#18325);+#18324 = CARTESIAN_POINT('',(0.345441613228,0.125));+#18325 = VECTOR('',#18326,1.);+#18326 = DIRECTION('',(0.,-1.));+#18327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18328 = PCURVE('',#17478,#18329);+#18329 = DEFINITIONAL_REPRESENTATION('',(#18330),#18334);+#18330 = LINE('',#18331,#18332);+#18331 = CARTESIAN_POINT('',(8.217107131128E-02,0.));+#18332 = VECTOR('',#18333,1.);+#18333 = DIRECTION('',(0.,1.));+#18334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18335 = ORIENTED_EDGE('',*,*,#17427,.T.);+#18336 = ORIENTED_EDGE('',*,*,#18337,.F.);+#18337 = EDGE_CURVE('',#18338,#17430,#18340,.T.);+#18338 = VERTEX_POINT('',#18339);+#18339 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,0.));+#18340 = SURFACE_CURVE('',#18341,(#18345,#18352),.PCURVE_S1.);+#18341 = LINE('',#18342,#18343);+#18342 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,0.));+#18343 = VECTOR('',#18344,1.);+#18344 = DIRECTION('',(0.,0.,-1.));+#18345 = PCURVE('',#17450,#18346);+#18346 = DEFINITIONAL_REPRESENTATION('',(#18347),#18351);+#18347 = LINE('',#18348,#18349);+#18348 = CARTESIAN_POINT('',(0.525943709769,0.125));+#18349 = VECTOR('',#18350,1.);+#18350 = DIRECTION('',(0.,-1.));+#18351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18352 = PCURVE('',#18270,#18353);+#18353 = DEFINITIONAL_REPRESENTATION('',(#18354),#18358);+#18354 = LINE('',#18355,#18356);+#18355 = CARTESIAN_POINT('',(5.936554722648E-04,0.));+#18356 = VECTOR('',#18357,1.);+#18357 = DIRECTION('',(0.,1.));+#18358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18359 = ORIENTED_EDGE('',*,*,#18360,.F.);+#18360 = EDGE_CURVE('',#18361,#18338,#18363,.T.);+#18361 = VERTEX_POINT('',#18362);+#18362 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.));+#18363 = SURFACE_CURVE('',#18364,(#18368,#18375),.PCURVE_S1.);+#18364 = LINE('',#18365,#18366);+#18365 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.));+#18366 = VECTOR('',#18367,1.);+#18367 = DIRECTION('',(0.,1.,0.));+#18368 = PCURVE('',#17450,#18369);+#18369 = DEFINITIONAL_REPRESENTATION('',(#18370),#18374);+#18370 = LINE('',#18371,#18372);+#18371 = CARTESIAN_POINT('',(0.475983918055,0.125));+#18372 = VECTOR('',#18373,1.);+#18373 = DIRECTION('',(1.,0.));+#18374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18375 = PCURVE('',#18303,#18376);+#18376 = DEFINITIONAL_REPRESENTATION('',(#18377),#18381);+#18377 = LINE('',#18378,#18379);+#18378 = CARTESIAN_POINT('',(-0.594729450677,-0.750472550933));+#18379 = VECTOR('',#18380,1.);+#18380 = DIRECTION('',(0.,1.));+#18381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18382 = ORIENTED_EDGE('',*,*,#18383,.F.);+#18383 = EDGE_CURVE('',#18384,#18361,#18386,.T.);+#18384 = VERTEX_POINT('',#18385);+#18385 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.1));+#18386 = SURFACE_CURVE('',#18387,(#18391,#18398),.PCURVE_S1.);+#18387 = LINE('',#18388,#18389);+#18388 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.1));+#18389 = VECTOR('',#18390,1.);+#18390 = DIRECTION('',(0.,0.,-1.));+#18391 = PCURVE('',#17450,#18392);+#18392 = DEFINITIONAL_REPRESENTATION('',(#18393),#18397);+#18393 = LINE('',#18394,#18395);+#18394 = CARTESIAN_POINT('',(0.475983918055,0.225));+#18395 = VECTOR('',#18396,1.);+#18396 = DIRECTION('',(0.,-1.));+#18397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18398 = PCURVE('',#18399,#18404);+#18399 = PLANE('',#18400);+#18400 = AXIS2_PLACEMENT_3D('',#18401,#18402,#18403);+#18401 = CARTESIAN_POINT('',(-9.020335452078E-02,4.029125655649E-02,0.1)+  );+#18402 = DIRECTION('',(0.,-1.,0.));+#18403 = DIRECTION('',(-1.,0.,0.));+#18404 = DEFINITIONAL_REPRESENTATION('',(#18405),#18409);+#18405 = LINE('',#18406,#18407);+#18406 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18407 = VECTOR('',#18408,1.);+#18408 = DIRECTION('',(0.,1.));+#18409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18410 = ORIENTED_EDGE('',*,*,#18411,.T.);+#18411 = EDGE_CURVE('',#18384,#18412,#18414,.T.);+#18412 = VERTEX_POINT('',#18413);+#18413 = CARTESIAN_POINT('',(-0.149462039396,-3.970874344617E-02,0.1));+#18414 = SURFACE_CURVE('',#18415,(#18419,#18426),.PCURVE_S1.);+#18415 = LINE('',#18416,#18417);+#18416 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.1));+#18417 = VECTOR('',#18418,1.);+#18418 = DIRECTION('',(0.,-1.,0.));+#18419 = PCURVE('',#17450,#18420);+#18420 = DEFINITIONAL_REPRESENTATION('',(#18421),#18425);+#18421 = LINE('',#18422,#18423);+#18422 = CARTESIAN_POINT('',(0.475983918055,0.225));+#18423 = VECTOR('',#18424,1.);+#18424 = DIRECTION('',(-1.,0.));+#18425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18426 = PCURVE('',#18427,#18432);+#18427 = PLANE('',#18428);+#18428 = AXIS2_PLACEMENT_3D('',#18429,#18430,#18431);+#18429 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18430 = DIRECTION('',(0.,0.,1.));+#18431 = DIRECTION('',(1.,0.,-0.));+#18432 = DEFINITIONAL_REPRESENTATION('',(#18433),#18437);+#18433 = LINE('',#18434,#18435);+#18434 = CARTESIAN_POINT('',(-0.687763226012,-0.775292602747));+#18435 = VECTOR('',#18436,1.);+#18436 = DIRECTION('',(0.,-1.));+#18437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18438 = ORIENTED_EDGE('',*,*,#18439,.T.);+#18439 = EDGE_CURVE('',#18412,#18288,#18440,.T.);+#18440 = SURFACE_CURVE('',#18441,(#18445,#18452),.PCURVE_S1.);+#18441 = LINE('',#18442,#18443);+#18442 = CARTESIAN_POINT('',(-0.149462039396,-3.970874344617E-02,0.1));+#18443 = VECTOR('',#18444,1.);+#18444 = DIRECTION('',(0.,0.,-1.));+#18445 = PCURVE('',#17450,#18446);+#18446 = DEFINITIONAL_REPRESENTATION('',(#18447),#18451);+#18447 = LINE('',#18448,#18449);+#18448 = CARTESIAN_POINT('',(0.395983918053,0.225));+#18449 = VECTOR('',#18450,1.);+#18450 = DIRECTION('',(0.,-1.));+#18451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18452 = PCURVE('',#18453,#18458);+#18453 = PLANE('',#18454);+#18454 = AXIS2_PLACEMENT_3D('',#18455,#18456,#18457);+#18455 = CARTESIAN_POINT('',(-0.22520335453,-3.970874344617E-02,0.1));+#18456 = DIRECTION('',(0.,1.,0.));+#18457 = DIRECTION('',(1.,0.,0.));+#18458 = DEFINITIONAL_REPRESENTATION('',(#18459),#18463);+#18459 = LINE('',#18460,#18461);+#18460 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#18461 = VECTOR('',#18462,1.);+#18462 = DIRECTION('',(0.,1.));+#18463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18464 = ADVANCED_FACE('',(#18465),#18132,.F.);+#18465 = FACE_BOUND('',#18466,.F.);+#18466 = EDGE_LOOP('',(#18467,#18492,#18513,#18514,#18537,#18560,#18588,+    #18616));+#18467 = ORIENTED_EDGE('',*,*,#18468,.F.);+#18468 = EDGE_CURVE('',#18469,#18471,#18473,.T.);+#18469 = VERTEX_POINT('',#18470);+#18470 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,0.));+#18471 = VERTEX_POINT('',#18472);+#18472 = CARTESIAN_POINT('',(-0.149462039396,0.460291256551,0.));+#18473 = SURFACE_CURVE('',#18474,(#18478,#18485),.PCURVE_S1.);+#18474 = LINE('',#18475,#18476);+#18475 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,0.));+#18476 = VECTOR('',#18477,1.);+#18477 = DIRECTION('',(0.,1.,0.));+#18478 = PCURVE('',#18132,#18479);+#18479 = DEFINITIONAL_REPRESENTATION('',(#18480),#18484);+#18480 = LINE('',#18481,#18482);+#18481 = CARTESIAN_POINT('',(0.84544161632,0.125));+#18482 = VECTOR('',#18483,1.);+#18483 = DIRECTION('',(1.,0.));+#18484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18485 = PCURVE('',#18303,#18486);+#18486 = DEFINITIONAL_REPRESENTATION('',(#18487),#18491);+#18487 = LINE('',#18488,#18489);+#18488 = CARTESIAN_POINT('',(-0.594729450677,-0.381014852668));+#18489 = VECTOR('',#18490,1.);+#18490 = DIRECTION('',(0.,1.));+#18491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18492 = ORIENTED_EDGE('',*,*,#18493,.F.);+#18493 = EDGE_CURVE('',#18117,#18469,#18494,.T.);+#18494 = SURFACE_CURVE('',#18495,(#18499,#18506),.PCURVE_S1.);+#18495 = LINE('',#18496,#18497);+#18496 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,-0.1));+#18497 = VECTOR('',#18498,1.);+#18498 = DIRECTION('',(0.,0.,1.));+#18499 = PCURVE('',#18132,#18500);+#18500 = DEFINITIONAL_REPRESENTATION('',(#18501),#18505);+#18501 = LINE('',#18502,#18503);+#18502 = CARTESIAN_POINT('',(0.84544161632,2.5E-02));+#18503 = VECTOR('',#18504,1.);+#18504 = DIRECTION('',(0.,1.));+#18505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18506 = PCURVE('',#18160,#18507);+#18507 = DEFINITIONAL_REPRESENTATION('',(#18508),#18512);+#18508 = LINE('',#18509,#18510);+#18509 = CARTESIAN_POINT('',(5.936481659258E-04,-0.1));+#18510 = VECTOR('',#18511,1.);+#18511 = DIRECTION('',(0.,1.));+#18512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18513 = ORIENTED_EDGE('',*,*,#18116,.T.);+#18514 = ORIENTED_EDGE('',*,*,#18515,.F.);+#18515 = EDGE_CURVE('',#18516,#18089,#18518,.T.);+#18516 = VERTEX_POINT('',#18517);+#18517 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,0.));+#18518 = SURFACE_CURVE('',#18519,(#18523,#18530),.PCURVE_S1.);+#18519 = LINE('',#18520,#18521);+#18520 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,0.));+#18521 = VECTOR('',#18522,1.);+#18522 = DIRECTION('',(0.,0.,-1.));+#18523 = PCURVE('',#18132,#18524);+#18524 = DEFINITIONAL_REPRESENTATION('',(#18525),#18529);+#18525 = LINE('',#18526,#18527);+#18526 = CARTESIAN_POINT('',(1.025943709769,0.125));+#18527 = VECTOR('',#18528,1.);+#18528 = DIRECTION('',(0.,-1.));+#18529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18530 = PCURVE('',#18104,#18531);+#18531 = DEFINITIONAL_REPRESENTATION('',(#18532),#18536);+#18532 = LINE('',#18533,#18534);+#18533 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#18534 = VECTOR('',#18535,1.);+#18535 = DIRECTION('',(0.,1.));+#18536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18537 = ORIENTED_EDGE('',*,*,#18538,.F.);+#18538 = EDGE_CURVE('',#18539,#18516,#18541,.T.);+#18539 = VERTEX_POINT('',#18540);+#18540 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.));+#18541 = SURFACE_CURVE('',#18542,(#18546,#18553),.PCURVE_S1.);+#18542 = LINE('',#18543,#18544);+#18543 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.));+#18544 = VECTOR('',#18545,1.);+#18545 = DIRECTION('',(0.,1.,0.));+#18546 = PCURVE('',#18132,#18547);+#18547 = DEFINITIONAL_REPRESENTATION('',(#18548),#18552);+#18548 = LINE('',#18549,#18550);+#18549 = CARTESIAN_POINT('',(0.975983918053,0.125));+#18550 = VECTOR('',#18551,1.);+#18551 = DIRECTION('',(1.,0.));+#18552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18553 = PCURVE('',#18303,#18554);+#18554 = DEFINITIONAL_REPRESENTATION('',(#18555),#18559);+#18555 = LINE('',#18556,#18557);+#18556 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550935));+#18557 = VECTOR('',#18558,1.);+#18558 = DIRECTION('',(0.,1.));+#18559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18560 = ORIENTED_EDGE('',*,*,#18561,.F.);+#18561 = EDGE_CURVE('',#18562,#18539,#18564,.T.);+#18562 = VERTEX_POINT('',#18563);+#18563 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.1));+#18564 = SURFACE_CURVE('',#18565,(#18569,#18576),.PCURVE_S1.);+#18565 = LINE('',#18566,#18567);+#18566 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.1));+#18567 = VECTOR('',#18568,1.);+#18568 = DIRECTION('',(0.,0.,-1.));+#18569 = PCURVE('',#18132,#18570);+#18570 = DEFINITIONAL_REPRESENTATION('',(#18571),#18575);+#18571 = LINE('',#18572,#18573);+#18572 = CARTESIAN_POINT('',(0.975983918053,0.225));+#18573 = VECTOR('',#18574,1.);+#18574 = DIRECTION('',(0.,-1.));+#18575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18576 = PCURVE('',#18577,#18582);+#18577 = PLANE('',#18578);+#18578 = AXIS2_PLACEMENT_3D('',#18579,#18580,#18581);+#18579 = CARTESIAN_POINT('',(-9.020335452078E-02,0.540291256554,0.1));+#18580 = DIRECTION('',(0.,-1.,0.));+#18581 = DIRECTION('',(-1.,0.,0.));+#18582 = DEFINITIONAL_REPRESENTATION('',(#18583),#18587);+#18583 = LINE('',#18584,#18585);+#18584 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18585 = VECTOR('',#18586,1.);+#18586 = DIRECTION('',(0.,1.));+#18587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18588 = ORIENTED_EDGE('',*,*,#18589,.T.);+#18589 = EDGE_CURVE('',#18562,#18590,#18592,.T.);+#18590 = VERTEX_POINT('',#18591);+#18591 = CARTESIAN_POINT('',(-0.149462039396,0.460291256551,0.1));+#18592 = SURFACE_CURVE('',#18593,(#18597,#18604),.PCURVE_S1.);+#18593 = LINE('',#18594,#18595);+#18594 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.1));+#18595 = VECTOR('',#18596,1.);+#18596 = DIRECTION('',(0.,-1.,0.));+#18597 = PCURVE('',#18132,#18598);+#18598 = DEFINITIONAL_REPRESENTATION('',(#18599),#18603);+#18599 = LINE('',#18600,#18601);+#18600 = CARTESIAN_POINT('',(0.975983918053,0.225));+#18601 = VECTOR('',#18602,1.);+#18602 = DIRECTION('',(-1.,0.));+#18603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18604 = PCURVE('',#18605,#18610);+#18605 = PLANE('',#18606);+#18606 = AXIS2_PLACEMENT_3D('',#18607,#18608,#18609);+#18607 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18608 = DIRECTION('',(0.,0.,1.));+#18609 = DIRECTION('',(1.,0.,-0.));+#18610 = DEFINITIONAL_REPRESENTATION('',(#18611),#18615);+#18611 = LINE('',#18612,#18613);+#18612 = CARTESIAN_POINT('',(-0.687763226012,-0.275292602749));+#18613 = VECTOR('',#18614,1.);+#18614 = DIRECTION('',(0.,-1.));+#18615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18616 = ORIENTED_EDGE('',*,*,#18617,.T.);+#18617 = EDGE_CURVE('',#18590,#18471,#18618,.T.);+#18618 = SURFACE_CURVE('',#18619,(#18623,#18630),.PCURVE_S1.);+#18619 = LINE('',#18620,#18621);+#18620 = CARTESIAN_POINT('',(-0.149462039396,0.460291256551,0.1));+#18621 = VECTOR('',#18622,1.);+#18622 = DIRECTION('',(0.,0.,-1.));+#18623 = PCURVE('',#18132,#18624);+#18624 = DEFINITIONAL_REPRESENTATION('',(#18625),#18629);+#18625 = LINE('',#18626,#18627);+#18626 = CARTESIAN_POINT('',(0.89598391805,0.225));+#18627 = VECTOR('',#18628,1.);+#18628 = DIRECTION('',(0.,-1.));+#18629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18630 = PCURVE('',#18631,#18636);+#18631 = PLANE('',#18632);+#18632 = AXIS2_PLACEMENT_3D('',#18633,#18634,#18635);+#18633 = CARTESIAN_POINT('',(-0.22520335453,0.460291256551,0.1));+#18634 = DIRECTION('',(0.,1.,0.));+#18635 = DIRECTION('',(1.,0.,0.));+#18636 = DEFINITIONAL_REPRESENTATION('',(#18637),#18641);+#18637 = LINE('',#18638,#18639);+#18638 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#18639 = VECTOR('',#18640,1.);+#18640 = DIRECTION('',(0.,1.));+#18641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18642 = ADVANCED_FACE('',(#18643),#17964,.F.);+#18643 = FACE_BOUND('',#18644,.F.);+#18644 = EDGE_LOOP('',(#18645,#18670,#18691,#18692,#18715,#18738,#18766,+    #18794));+#18645 = ORIENTED_EDGE('',*,*,#18646,.F.);+#18646 = EDGE_CURVE('',#18647,#18649,#18651,.T.);+#18647 = VERTEX_POINT('',#18648);+#18648 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,0.));+#18649 = VERTEX_POINT('',#18650);+#18650 = CARTESIAN_POINT('',(-0.149462039396,0.960291256553,0.));+#18651 = SURFACE_CURVE('',#18652,(#18656,#18663),.PCURVE_S1.);+#18652 = LINE('',#18653,#18654);+#18653 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,0.));+#18654 = VECTOR('',#18655,1.);+#18655 = DIRECTION('',(0.,1.,0.));+#18656 = PCURVE('',#17964,#18657);+#18657 = DEFINITIONAL_REPRESENTATION('',(#18658),#18662);+#18658 = LINE('',#18659,#18660);+#18659 = CARTESIAN_POINT('',(1.345441613229,0.125));+#18660 = VECTOR('',#18661,1.);+#18661 = DIRECTION('',(1.,0.));+#18662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18663 = PCURVE('',#18303,#18664);+#18664 = DEFINITIONAL_REPRESENTATION('',(#18665),#18669);+#18665 = LINE('',#18666,#18667);+#18666 = CARTESIAN_POINT('',(-0.594729450677,0.118985144241));+#18667 = VECTOR('',#18668,1.);+#18668 = DIRECTION('',(0.,1.));+#18669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18670 = ORIENTED_EDGE('',*,*,#18671,.T.);+#18671 = EDGE_CURVE('',#18647,#17949,#18672,.T.);+#18672 = SURFACE_CURVE('',#18673,(#18677,#18684),.PCURVE_S1.);+#18673 = LINE('',#18674,#18675);+#18674 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,0.));+#18675 = VECTOR('',#18676,1.);+#18676 = DIRECTION('',(0.,0.,-1.));+#18677 = PCURVE('',#17964,#18678);+#18678 = DEFINITIONAL_REPRESENTATION('',(#18679),#18683);+#18679 = LINE('',#18680,#18681);+#18680 = CARTESIAN_POINT('',(1.345441613229,0.125));+#18681 = VECTOR('',#18682,1.);+#18682 = DIRECTION('',(0.,-1.));+#18683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18684 = PCURVE('',#17992,#18685);+#18685 = DEFINITIONAL_REPRESENTATION('',(#18686),#18690);+#18686 = LINE('',#18687,#18688);+#18687 = CARTESIAN_POINT('',(8.217107131155E-02,0.));+#18688 = VECTOR('',#18689,1.);+#18689 = DIRECTION('',(0.,1.));+#18690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18691 = ORIENTED_EDGE('',*,*,#17948,.T.);+#18692 = ORIENTED_EDGE('',*,*,#18693,.F.);+#18693 = EDGE_CURVE('',#18694,#17921,#18696,.T.);+#18694 = VERTEX_POINT('',#18695);+#18695 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,0.));+#18696 = SURFACE_CURVE('',#18697,(#18701,#18708),.PCURVE_S1.);+#18697 = LINE('',#18698,#18699);+#18698 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,0.));+#18699 = VECTOR('',#18700,1.);+#18700 = DIRECTION('',(0.,0.,-1.));+#18701 = PCURVE('',#17964,#18702);+#18702 = DEFINITIONAL_REPRESENTATION('',(#18703),#18707);+#18703 = LINE('',#18704,#18705);+#18704 = CARTESIAN_POINT('',(1.525943709769,0.125));+#18705 = VECTOR('',#18706,1.);+#18706 = DIRECTION('',(0.,-1.));+#18707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18708 = PCURVE('',#17936,#18709);+#18709 = DEFINITIONAL_REPRESENTATION('',(#18710),#18714);+#18710 = LINE('',#18711,#18712);+#18711 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#18712 = VECTOR('',#18713,1.);+#18713 = DIRECTION('',(0.,1.));+#18714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18715 = ORIENTED_EDGE('',*,*,#18716,.F.);+#18716 = EDGE_CURVE('',#18717,#18694,#18719,.T.);+#18717 = VERTEX_POINT('',#18718);+#18718 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.));+#18719 = SURFACE_CURVE('',#18720,(#18724,#18731),.PCURVE_S1.);+#18720 = LINE('',#18721,#18722);+#18721 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.));+#18722 = VECTOR('',#18723,1.);+#18723 = DIRECTION('',(0.,1.,0.));+#18724 = PCURVE('',#17964,#18725);+#18725 = DEFINITIONAL_REPRESENTATION('',(#18726),#18730);+#18726 = LINE('',#18727,#18728);+#18727 = CARTESIAN_POINT('',(1.47598391805,0.125));+#18728 = VECTOR('',#18729,1.);+#18729 = DIRECTION('',(1.,0.));+#18730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18731 = PCURVE('',#18303,#18732);+#18732 = DEFINITIONAL_REPRESENTATION('',(#18733),#18737);+#18733 = LINE('',#18734,#18735);+#18734 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#18735 = VECTOR('',#18736,1.);+#18736 = DIRECTION('',(0.,1.));+#18737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18738 = ORIENTED_EDGE('',*,*,#18739,.F.);+#18739 = EDGE_CURVE('',#18740,#18717,#18742,.T.);+#18740 = VERTEX_POINT('',#18741);+#18741 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.1));+#18742 = SURFACE_CURVE('',#18743,(#18747,#18754),.PCURVE_S1.);+#18743 = LINE('',#18744,#18745);+#18744 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.1));+#18745 = VECTOR('',#18746,1.);+#18746 = DIRECTION('',(0.,0.,-1.));+#18747 = PCURVE('',#17964,#18748);+#18748 = DEFINITIONAL_REPRESENTATION('',(#18749),#18753);+#18749 = LINE('',#18750,#18751);+#18750 = CARTESIAN_POINT('',(1.47598391805,0.225));+#18751 = VECTOR('',#18752,1.);+#18752 = DIRECTION('',(0.,-1.));+#18753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18754 = PCURVE('',#18755,#18760);+#18755 = PLANE('',#18756);+#18756 = AXIS2_PLACEMENT_3D('',#18757,#18758,#18759);+#18757 = CARTESIAN_POINT('',(-9.020335452078E-02,1.040291256551,0.1));+#18758 = DIRECTION('',(0.,-1.,0.));+#18759 = DIRECTION('',(-1.,0.,0.));+#18760 = DEFINITIONAL_REPRESENTATION('',(#18761),#18765);+#18761 = LINE('',#18762,#18763);+#18762 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18763 = VECTOR('',#18764,1.);+#18764 = DIRECTION('',(0.,1.));+#18765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18766 = ORIENTED_EDGE('',*,*,#18767,.T.);+#18767 = EDGE_CURVE('',#18740,#18768,#18770,.T.);+#18768 = VERTEX_POINT('',#18769);+#18769 = CARTESIAN_POINT('',(-0.149462039396,0.960291256553,0.1));+#18770 = SURFACE_CURVE('',#18771,(#18775,#18782),.PCURVE_S1.);+#18771 = LINE('',#18772,#18773);+#18772 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.1));+#18773 = VECTOR('',#18774,1.);+#18774 = DIRECTION('',(0.,-1.,0.));+#18775 = PCURVE('',#17964,#18776);+#18776 = DEFINITIONAL_REPRESENTATION('',(#18777),#18781);+#18777 = LINE('',#18778,#18779);+#18778 = CARTESIAN_POINT('',(1.47598391805,0.225));+#18779 = VECTOR('',#18780,1.);+#18780 = DIRECTION('',(-1.,0.));+#18781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18782 = PCURVE('',#18783,#18788);+#18783 = PLANE('',#18784);+#18784 = AXIS2_PLACEMENT_3D('',#18785,#18786,#18787);+#18785 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18786 = DIRECTION('',(0.,0.,1.));+#18787 = DIRECTION('',(1.,0.,-0.));+#18788 = DEFINITIONAL_REPRESENTATION('',(#18789),#18793);+#18789 = LINE('',#18790,#18791);+#18790 = CARTESIAN_POINT('',(-0.687763226012,0.224707397248));+#18791 = VECTOR('',#18792,1.);+#18792 = DIRECTION('',(0.,-1.));+#18793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18794 = ORIENTED_EDGE('',*,*,#18795,.T.);+#18795 = EDGE_CURVE('',#18768,#18649,#18796,.T.);+#18796 = SURFACE_CURVE('',#18797,(#18801,#18808),.PCURVE_S1.);+#18797 = LINE('',#18798,#18799);+#18798 = CARTESIAN_POINT('',(-0.149462039396,0.960291256553,0.1));+#18799 = VECTOR('',#18800,1.);+#18800 = DIRECTION('',(0.,0.,-1.));+#18801 = PCURVE('',#17964,#18802);+#18802 = DEFINITIONAL_REPRESENTATION('',(#18803),#18807);+#18803 = LINE('',#18804,#18805);+#18804 = CARTESIAN_POINT('',(1.395983918052,0.225));+#18805 = VECTOR('',#18806,1.);+#18806 = DIRECTION('',(0.,-1.));+#18807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18808 = PCURVE('',#18809,#18814);+#18809 = PLANE('',#18810);+#18810 = AXIS2_PLACEMENT_3D('',#18811,#18812,#18813);+#18811 = CARTESIAN_POINT('',(-0.22520335453,0.960291256553,0.1));+#18812 = DIRECTION('',(0.,1.,0.));+#18813 = DIRECTION('',(1.,0.,0.));+#18814 = DEFINITIONAL_REPRESENTATION('',(#18815),#18819);+#18815 = LINE('',#18816,#18817);+#18816 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#18817 = VECTOR('',#18818,1.);+#18818 = DIRECTION('',(0.,1.));+#18819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18820 = ADVANCED_FACE('',(#18821),#17796,.F.);+#18821 = FACE_BOUND('',#18822,.F.);+#18822 = EDGE_LOOP('',(#18823,#18848,#18869,#18870,#18893,#18916,#18944,+    #18972));+#18823 = ORIENTED_EDGE('',*,*,#18824,.F.);+#18824 = EDGE_CURVE('',#18825,#18827,#18829,.T.);+#18825 = VERTEX_POINT('',#18826);+#18826 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,0.));+#18827 = VERTEX_POINT('',#18828);+#18828 = CARTESIAN_POINT('',(-0.149462039396,1.460291256555,0.));+#18829 = SURFACE_CURVE('',#18830,(#18834,#18841),.PCURVE_S1.);+#18830 = LINE('',#18831,#18832);+#18831 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,0.));+#18832 = VECTOR('',#18833,1.);+#18833 = DIRECTION('',(0.,1.,0.));+#18834 = PCURVE('',#17796,#18835);+#18835 = DEFINITIONAL_REPRESENTATION('',(#18836),#18840);+#18836 = LINE('',#18837,#18838);+#18837 = CARTESIAN_POINT('',(1.845441613228,0.125));+#18838 = VECTOR('',#18839,1.);+#18839 = DIRECTION('',(1.,0.));+#18840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18841 = PCURVE('',#18303,#18842);+#18842 = DEFINITIONAL_REPRESENTATION('',(#18843),#18847);+#18843 = LINE('',#18844,#18845);+#18844 = CARTESIAN_POINT('',(-0.594729450677,0.61898514424));+#18845 = VECTOR('',#18846,1.);+#18846 = DIRECTION('',(0.,1.));+#18847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18848 = ORIENTED_EDGE('',*,*,#18849,.T.);+#18849 = EDGE_CURVE('',#18825,#17781,#18850,.T.);+#18850 = SURFACE_CURVE('',#18851,(#18855,#18862),.PCURVE_S1.);+#18851 = LINE('',#18852,#18853);+#18852 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,0.));+#18853 = VECTOR('',#18854,1.);+#18854 = DIRECTION('',(0.,0.,-1.));+#18855 = PCURVE('',#17796,#18856);+#18856 = DEFINITIONAL_REPRESENTATION('',(#18857),#18861);+#18857 = LINE('',#18858,#18859);+#18858 = CARTESIAN_POINT('',(1.845441613228,0.125));+#18859 = VECTOR('',#18860,1.);+#18860 = DIRECTION('',(0.,-1.));+#18861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18862 = PCURVE('',#17824,#18863);+#18863 = DEFINITIONAL_REPRESENTATION('',(#18864),#18868);+#18864 = LINE('',#18865,#18866);+#18865 = CARTESIAN_POINT('',(8.217107131113E-02,0.));+#18866 = VECTOR('',#18867,1.);+#18867 = DIRECTION('',(0.,1.));+#18868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18869 = ORIENTED_EDGE('',*,*,#17780,.T.);+#18870 = ORIENTED_EDGE('',*,*,#18871,.F.);+#18871 = EDGE_CURVE('',#18872,#17753,#18874,.T.);+#18872 = VERTEX_POINT('',#18873);+#18873 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,0.));+#18874 = SURFACE_CURVE('',#18875,(#18879,#18886),.PCURVE_S1.);+#18875 = LINE('',#18876,#18877);+#18876 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,0.));+#18877 = VECTOR('',#18878,1.);+#18878 = DIRECTION('',(0.,0.,-1.));+#18879 = PCURVE('',#17796,#18880);+#18880 = DEFINITIONAL_REPRESENTATION('',(#18881),#18885);+#18881 = LINE('',#18882,#18883);+#18882 = CARTESIAN_POINT('',(2.025943709769,0.125));+#18883 = VECTOR('',#18884,1.);+#18884 = DIRECTION('',(0.,-1.));+#18885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18886 = PCURVE('',#17768,#18887);+#18887 = DEFINITIONAL_REPRESENTATION('',(#18888),#18892);+#18888 = LINE('',#18889,#18890);+#18889 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#18890 = VECTOR('',#18891,1.);+#18891 = DIRECTION('',(0.,1.));+#18892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18893 = ORIENTED_EDGE('',*,*,#18894,.F.);+#18894 = EDGE_CURVE('',#18895,#18872,#18897,.T.);+#18895 = VERTEX_POINT('',#18896);+#18896 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.));+#18897 = SURFACE_CURVE('',#18898,(#18902,#18909),.PCURVE_S1.);+#18898 = LINE('',#18899,#18900);+#18899 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.));+#18900 = VECTOR('',#18901,1.);+#18901 = DIRECTION('',(0.,1.,0.));+#18902 = PCURVE('',#17796,#18903);+#18903 = DEFINITIONAL_REPRESENTATION('',(#18904),#18908);+#18904 = LINE('',#18905,#18906);+#18905 = CARTESIAN_POINT('',(1.975983918052,0.125));+#18906 = VECTOR('',#18907,1.);+#18907 = DIRECTION('',(1.,0.));+#18908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18909 = PCURVE('',#18303,#18910);+#18910 = DEFINITIONAL_REPRESENTATION('',(#18911),#18915);+#18911 = LINE('',#18912,#18913);+#18912 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#18913 = VECTOR('',#18914,1.);+#18914 = DIRECTION('',(0.,1.));+#18915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18916 = ORIENTED_EDGE('',*,*,#18917,.F.);+#18917 = EDGE_CURVE('',#18918,#18895,#18920,.T.);+#18918 = VERTEX_POINT('',#18919);+#18919 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.1));+#18920 = SURFACE_CURVE('',#18921,(#18925,#18932),.PCURVE_S1.);+#18921 = LINE('',#18922,#18923);+#18922 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.1));+#18923 = VECTOR('',#18924,1.);+#18924 = DIRECTION('',(0.,0.,-1.));+#18925 = PCURVE('',#17796,#18926);+#18926 = DEFINITIONAL_REPRESENTATION('',(#18927),#18931);+#18927 = LINE('',#18928,#18929);+#18928 = CARTESIAN_POINT('',(1.975983918052,0.225));+#18929 = VECTOR('',#18930,1.);+#18930 = DIRECTION('',(0.,-1.));+#18931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18932 = PCURVE('',#18933,#18938);+#18933 = PLANE('',#18934);+#18934 = AXIS2_PLACEMENT_3D('',#18935,#18936,#18937);+#18935 = CARTESIAN_POINT('',(-9.020335452078E-02,1.540291256553,0.1));+#18936 = DIRECTION('',(0.,-1.,0.));+#18937 = DIRECTION('',(-1.,0.,0.));+#18938 = DEFINITIONAL_REPRESENTATION('',(#18939),#18943);+#18939 = LINE('',#18940,#18941);+#18940 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18941 = VECTOR('',#18942,1.);+#18942 = DIRECTION('',(0.,1.));+#18943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18944 = ORIENTED_EDGE('',*,*,#18945,.T.);+#18945 = EDGE_CURVE('',#18918,#18946,#18948,.T.);+#18946 = VERTEX_POINT('',#18947);+#18947 = CARTESIAN_POINT('',(-0.149462039396,1.460291256555,0.1));+#18948 = SURFACE_CURVE('',#18949,(#18953,#18960),.PCURVE_S1.);+#18949 = LINE('',#18950,#18951);+#18950 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.1));+#18951 = VECTOR('',#18952,1.);+#18952 = DIRECTION('',(0.,-1.,0.));+#18953 = PCURVE('',#17796,#18954);+#18954 = DEFINITIONAL_REPRESENTATION('',(#18955),#18959);+#18955 = LINE('',#18956,#18957);+#18956 = CARTESIAN_POINT('',(1.975983918052,0.225));+#18957 = VECTOR('',#18958,1.);+#18958 = DIRECTION('',(-1.,0.));+#18959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18960 = PCURVE('',#18961,#18966);+#18961 = PLANE('',#18962);+#18962 = AXIS2_PLACEMENT_3D('',#18963,#18964,#18965);+#18963 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18964 = DIRECTION('',(0.,0.,1.));+#18965 = DIRECTION('',(1.,0.,-0.));+#18966 = DEFINITIONAL_REPRESENTATION('',(#18967),#18971);+#18967 = LINE('',#18968,#18969);+#18968 = CARTESIAN_POINT('',(-0.687763226012,0.72470739725));+#18969 = VECTOR('',#18970,1.);+#18970 = DIRECTION('',(0.,-1.));+#18971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18972 = ORIENTED_EDGE('',*,*,#18973,.T.);+#18973 = EDGE_CURVE('',#18946,#18827,#18974,.T.);+#18974 = SURFACE_CURVE('',#18975,(#18979,#18986),.PCURVE_S1.);+#18975 = LINE('',#18976,#18977);+#18976 = CARTESIAN_POINT('',(-0.149462039396,1.460291256555,0.1));+#18977 = VECTOR('',#18978,1.);+#18978 = DIRECTION('',(0.,0.,-1.));+#18979 = PCURVE('',#17796,#18980);+#18980 = DEFINITIONAL_REPRESENTATION('',(#18981),#18985);+#18981 = LINE('',#18982,#18983);+#18982 = CARTESIAN_POINT('',(1.895983918054,0.225));+#18983 = VECTOR('',#18984,1.);+#18984 = DIRECTION('',(0.,-1.));+#18985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18986 = PCURVE('',#18987,#18992);+#18987 = PLANE('',#18988);+#18988 = AXIS2_PLACEMENT_3D('',#18989,#18990,#18991);+#18989 = CARTESIAN_POINT('',(-0.22520335453,1.460291256555,0.1));+#18990 = DIRECTION('',(0.,1.,0.));+#18991 = DIRECTION('',(1.,0.,0.));+#18992 = DEFINITIONAL_REPRESENTATION('',(#18993),#18997);+#18993 = LINE('',#18994,#18995);+#18994 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#18995 = VECTOR('',#18996,1.);+#18996 = DIRECTION('',(0.,1.));+#18997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#18998 = ADVANCED_FACE('',(#18999),#18303,.T.);+#18999 = FACE_BOUND('',#19000,.F.);+#19000 = EDGE_LOOP('',(#19001,#19002,#19025,#19053,#19074,#19075,#19098,+    #19121,#19144,#19167,#19188,#19189,#19212,#19240,#19261,#19262,+    #19285,#19308,#19331,#19354,#19375,#19376,#19399,#19427,#19448,+    #19449,#19472,#19495,#19518,#19541,#19562,#19563,#19586,#19614,+    #19635,#19636,#19659,#19682,#19705,#19728,#19756,#19779,#19807,+    #19830,#19853,#19876));+#19001 = ORIENTED_EDGE('',*,*,#18285,.T.);+#19002 = ORIENTED_EDGE('',*,*,#19003,.F.);+#19003 = EDGE_CURVE('',#19004,#18288,#19006,.T.);+#19004 = VERTEX_POINT('',#19005);+#19005 = CARTESIAN_POINT('',(-0.106284942226,-3.970874344617E-02,0.));+#19006 = SURFACE_CURVE('',#19007,(#19011,#19018),.PCURVE_S1.);+#19007 = LINE('',#19008,#19009);+#19008 = CARTESIAN_POINT('',(-0.106284942226,-3.970874344617E-02,0.));+#19009 = VECTOR('',#19010,1.);+#19010 = DIRECTION('',(-1.,0.,0.));+#19011 = PCURVE('',#18303,#19012);+#19012 = DEFINITIONAL_REPRESENTATION('',(#19013),#19017);+#19013 = LINE('',#19014,#19015);+#19014 = CARTESIAN_POINT('',(-0.551552353507,-0.830472550935));+#19015 = VECTOR('',#19016,1.);+#19016 = DIRECTION('',(-1.,0.));+#19017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19018 = PCURVE('',#18453,#19019);+#19019 = DEFINITIONAL_REPRESENTATION('',(#19020),#19024);+#19020 = LINE('',#19021,#19022);+#19021 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19022 = VECTOR('',#19023,1.);+#19023 = DIRECTION('',(-1.,0.));+#19024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19025 = ORIENTED_EDGE('',*,*,#19026,.F.);+#19026 = EDGE_CURVE('',#19027,#19004,#19029,.T.);+#19027 = VERTEX_POINT('',#19028);+#19028 = CARTESIAN_POINT('',(-0.106284942226,4.029125655649E-02,0.));+#19029 = SURFACE_CURVE('',#19030,(#19034,#19041),.PCURVE_S1.);+#19030 = LINE('',#19031,#19032);+#19031 = CARTESIAN_POINT('',(-0.106284942226,4.029125655649E-02,0.));+#19032 = VECTOR('',#19033,1.);+#19033 = DIRECTION('',(0.,-1.,0.));+#19034 = PCURVE('',#18303,#19035);+#19035 = DEFINITIONAL_REPRESENTATION('',(#19036),#19040);+#19036 = LINE('',#19037,#19038);+#19037 = CARTESIAN_POINT('',(-0.551552353507,-0.750472550933));+#19038 = VECTOR('',#19039,1.);+#19039 = DIRECTION('',(0.,-1.));+#19040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19041 = PCURVE('',#19042,#19047);+#19042 = PLANE('',#19043);+#19043 = AXIS2_PLACEMENT_3D('',#19044,#19045,#19046);+#19044 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19045 = DIRECTION('',(-1.,0.,0.));+#19046 = DIRECTION('',(0.,-1.,0.));+#19047 = DEFINITIONAL_REPRESENTATION('',(#19048),#19052);+#19048 = LINE('',#19049,#19050);+#19049 = CARTESIAN_POINT('',(2.013750127431,-0.1));+#19050 = VECTOR('',#19051,1.);+#19051 = DIRECTION('',(1.,0.));+#19052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19053 = ORIENTED_EDGE('',*,*,#19054,.T.);+#19054 = EDGE_CURVE('',#19027,#18361,#19055,.T.);+#19055 = SURFACE_CURVE('',#19056,(#19060,#19067),.PCURVE_S1.);+#19056 = LINE('',#19057,#19058);+#19057 = CARTESIAN_POINT('',(-0.106284942226,4.029125655649E-02,0.));+#19058 = VECTOR('',#19059,1.);+#19059 = DIRECTION('',(-1.,0.,0.));+#19060 = PCURVE('',#18303,#19061);+#19061 = DEFINITIONAL_REPRESENTATION('',(#19062),#19066);+#19062 = LINE('',#19063,#19064);+#19063 = CARTESIAN_POINT('',(-0.551552353507,-0.750472550933));+#19064 = VECTOR('',#19065,1.);+#19065 = DIRECTION('',(-1.,0.));+#19066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19067 = PCURVE('',#18399,#19068);+#19068 = DEFINITIONAL_REPRESENTATION('',(#19069),#19073);+#19069 = LINE('',#19070,#19071);+#19070 = CARTESIAN_POINT('',(1.608158770522E-02,0.1));+#19071 = VECTOR('',#19072,1.);+#19072 = DIRECTION('',(1.,0.));+#19073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19074 = ORIENTED_EDGE('',*,*,#18360,.T.);+#19075 = ORIENTED_EDGE('',*,*,#19076,.T.);+#19076 = EDGE_CURVE('',#18338,#19077,#19079,.T.);+#19077 = VERTEX_POINT('',#19078);+#19078 = CARTESIAN_POINT('',(-7.499999998255E-02,0.124999999998,0.));+#19079 = SURFACE_CURVE('',#19080,(#19084,#19091),.PCURVE_S1.);+#19080 = LINE('',#19081,#19082);+#19081 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,0.));+#19082 = VECTOR('',#19083,1.);+#19083 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#19084 = PCURVE('',#18303,#19085);+#19085 = DEFINITIONAL_REPRESENTATION('',(#19086),#19090);+#19086 = LINE('',#19087,#19088);+#19087 = CARTESIAN_POINT('',(-0.594729450677,-0.700512759219));+#19088 = VECTOR('',#19089,1.);+#19089 = DIRECTION('',(0.906183139987,0.422885465348));+#19090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19091 = PCURVE('',#18270,#19092);+#19092 = DEFINITIONAL_REPRESENTATION('',(#19093),#19097);+#19093 = LINE('',#19094,#19095);+#19094 = CARTESIAN_POINT('',(5.936554722648E-04,0.));+#19095 = VECTOR('',#19096,1.);+#19096 = DIRECTION('',(1.,0.));+#19097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19098 = ORIENTED_EDGE('',*,*,#19099,.F.);+#19099 = EDGE_CURVE('',#19100,#19077,#19102,.T.);+#19100 = VERTEX_POINT('',#19101);+#19101 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999998,0.));+#19102 = SURFACE_CURVE('',#19103,(#19107,#19114),.PCURVE_S1.);+#19103 = LINE('',#19104,#19105);+#19104 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999998,0.));+#19105 = VECTOR('',#19106,1.);+#19106 = DIRECTION('',(-1.,0.,0.));+#19107 = PCURVE('',#18303,#19108);+#19108 = DEFINITIONAL_REPRESENTATION('',(#19109),#19113);+#19109 = LINE('',#19110,#19111);+#19110 = CARTESIAN_POINT('',(-0.395267411253,-0.665763807491));+#19111 = VECTOR('',#19112,1.);+#19112 = DIRECTION('',(-1.,0.));+#19113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19114 = PCURVE('',#18244,#19115);+#19115 = DEFINITIONAL_REPRESENTATION('',(#19116),#19120);+#19116 = LINE('',#19117,#19118);+#19117 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19118 = VECTOR('',#19119,1.);+#19119 = DIRECTION('',(1.,0.));+#19120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19121 = ORIENTED_EDGE('',*,*,#19122,.T.);+#19122 = EDGE_CURVE('',#19100,#19123,#19125,.T.);+#19123 = VERTEX_POINT('',#19124);+#19124 = CARTESIAN_POINT('',(5.000000002838E-02,0.375000000004,0.));+#19125 = SURFACE_CURVE('',#19126,(#19130,#19137),.PCURVE_S1.);+#19126 = LINE('',#19127,#19128);+#19127 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999998,0.));+#19128 = VECTOR('',#19129,1.);+#19129 = DIRECTION('',(0.,1.,0.));+#19130 = PCURVE('',#18303,#19131);+#19131 = DEFINITIONAL_REPRESENTATION('',(#19132),#19136);+#19132 = LINE('',#19133,#19134);+#19133 = CARTESIAN_POINT('',(-0.395267411253,-0.665763807491));+#19134 = VECTOR('',#19135,1.);+#19135 = DIRECTION('',(0.,1.));+#19136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19137 = PCURVE('',#18216,#19138);+#19138 = DEFINITIONAL_REPRESENTATION('',(#19139),#19143);+#19139 = LINE('',#19140,#19141);+#19140 = CARTESIAN_POINT('',(-1.999997389923E-12,0.));+#19141 = VECTOR('',#19142,1.);+#19142 = DIRECTION('',(1.,0.));+#19143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19144 = ORIENTED_EDGE('',*,*,#19145,.F.);+#19145 = EDGE_CURVE('',#19146,#19123,#19148,.T.);+#19146 = VERTEX_POINT('',#19147);+#19147 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#19148 = SURFACE_CURVE('',#19149,(#19153,#19160),.PCURVE_S1.);+#19149 = LINE('',#19150,#19151);+#19150 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#19151 = VECTOR('',#19152,1.);+#19152 = DIRECTION('',(1.,0.,0.));+#19153 = PCURVE('',#18303,#19154);+#19154 = DEFINITIONAL_REPRESENTATION('',(#19155),#19159);+#19155 = LINE('',#19156,#19157);+#19156 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807485));+#19157 = VECTOR('',#19158,1.);+#19158 = DIRECTION('',(1.,0.));+#19159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19160 = PCURVE('',#18188,#19161);+#19161 = DEFINITIONAL_REPRESENTATION('',(#19162),#19166);+#19162 = LINE('',#19163,#19164);+#19163 = CARTESIAN_POINT('',(0.,0.));+#19164 = VECTOR('',#19165,1.);+#19165 = DIRECTION('',(1.,0.));+#19166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19167 = ORIENTED_EDGE('',*,*,#19168,.T.);+#19168 = EDGE_CURVE('',#19146,#18469,#19169,.T.);+#19169 = SURFACE_CURVE('',#19170,(#19174,#19181),.PCURVE_S1.);+#19170 = LINE('',#19171,#19172);+#19171 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#19172 = VECTOR('',#19173,1.);+#19173 = DIRECTION('',(-0.906183139959,0.422885465409,0.));+#19174 = PCURVE('',#18303,#19175);+#19175 = DEFINITIONAL_REPRESENTATION('',(#19176),#19180);+#19176 = LINE('',#19177,#19178);+#19177 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807485));+#19178 = VECTOR('',#19179,1.);+#19179 = DIRECTION('',(-0.906183139959,0.422885465409));+#19180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19181 = PCURVE('',#18160,#19182);+#19182 = DEFINITIONAL_REPRESENTATION('',(#19183),#19187);+#19183 = LINE('',#19184,#19185);+#19184 = CARTESIAN_POINT('',(8.276472676639E-02,0.));+#19185 = VECTOR('',#19186,1.);+#19186 = DIRECTION('',(-1.,0.));+#19187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19188 = ORIENTED_EDGE('',*,*,#18468,.T.);+#19189 = ORIENTED_EDGE('',*,*,#19190,.F.);+#19190 = EDGE_CURVE('',#19191,#18471,#19193,.T.);+#19191 = VERTEX_POINT('',#19192);+#19192 = CARTESIAN_POINT('',(-0.106284942226,0.460291256551,0.));+#19193 = SURFACE_CURVE('',#19194,(#19198,#19205),.PCURVE_S1.);+#19194 = LINE('',#19195,#19196);+#19195 = CARTESIAN_POINT('',(-0.106284942226,0.460291256551,0.));+#19196 = VECTOR('',#19197,1.);+#19197 = DIRECTION('',(-1.,0.,0.));+#19198 = PCURVE('',#18303,#19199);+#19199 = DEFINITIONAL_REPRESENTATION('',(#19200),#19204);+#19200 = LINE('',#19201,#19202);+#19201 = CARTESIAN_POINT('',(-0.551552353507,-0.330472550938));+#19202 = VECTOR('',#19203,1.);+#19203 = DIRECTION('',(-1.,0.));+#19204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19205 = PCURVE('',#18631,#19206);+#19206 = DEFINITIONAL_REPRESENTATION('',(#19207),#19211);+#19207 = LINE('',#19208,#19209);+#19208 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19209 = VECTOR('',#19210,1.);+#19210 = DIRECTION('',(-1.,0.));+#19211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19212 = ORIENTED_EDGE('',*,*,#19213,.F.);+#19213 = EDGE_CURVE('',#19214,#19191,#19216,.T.);+#19214 = VERTEX_POINT('',#19215);+#19215 = CARTESIAN_POINT('',(-0.106284942226,0.540291256554,0.));+#19216 = SURFACE_CURVE('',#19217,(#19221,#19228),.PCURVE_S1.);+#19217 = LINE('',#19218,#19219);+#19218 = CARTESIAN_POINT('',(-0.106284942226,0.540291256554,0.));+#19219 = VECTOR('',#19220,1.);+#19220 = DIRECTION('',(0.,-1.,0.));+#19221 = PCURVE('',#18303,#19222);+#19222 = DEFINITIONAL_REPRESENTATION('',(#19223),#19227);+#19223 = LINE('',#19224,#19225);+#19224 = CARTESIAN_POINT('',(-0.551552353507,-0.250472550935));+#19225 = VECTOR('',#19226,1.);+#19226 = DIRECTION('',(0.,-1.));+#19227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19228 = PCURVE('',#19229,#19234);+#19229 = PLANE('',#19230);+#19230 = AXIS2_PLACEMENT_3D('',#19231,#19232,#19233);+#19231 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19232 = DIRECTION('',(-1.,0.,0.));+#19233 = DIRECTION('',(0.,-1.,0.));+#19234 = DEFINITIONAL_REPRESENTATION('',(#19235),#19239);+#19235 = LINE('',#19236,#19237);+#19236 = CARTESIAN_POINT('',(1.513750127433,-0.1));+#19237 = VECTOR('',#19238,1.);+#19238 = DIRECTION('',(1.,0.));+#19239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19240 = ORIENTED_EDGE('',*,*,#19241,.F.);+#19241 = EDGE_CURVE('',#18539,#19214,#19242,.T.);+#19242 = SURFACE_CURVE('',#19243,(#19247,#19254),.PCURVE_S1.);+#19243 = LINE('',#19244,#19245);+#19244 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.));+#19245 = VECTOR('',#19246,1.);+#19246 = DIRECTION('',(1.,0.,0.));+#19247 = PCURVE('',#18303,#19248);+#19248 = DEFINITIONAL_REPRESENTATION('',(#19249),#19253);+#19249 = LINE('',#19250,#19251);+#19250 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550935));+#19251 = VECTOR('',#19252,1.);+#19252 = DIRECTION('',(1.,0.));+#19253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19254 = PCURVE('',#18577,#19255);+#19255 = DEFINITIONAL_REPRESENTATION('',(#19256),#19260);+#19256 = LINE('',#19257,#19258);+#19257 = CARTESIAN_POINT('',(5.925868487522E-02,0.1));+#19258 = VECTOR('',#19259,1.);+#19259 = DIRECTION('',(-1.,-0.));+#19260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19261 = ORIENTED_EDGE('',*,*,#18538,.T.);+#19262 = ORIENTED_EDGE('',*,*,#19263,.T.);+#19263 = EDGE_CURVE('',#18516,#19264,#19266,.T.);+#19264 = VERTEX_POINT('',#19265);+#19265 = CARTESIAN_POINT('',(-7.49999999789E-02,0.625,0.));+#19266 = SURFACE_CURVE('',#19267,(#19271,#19278),.PCURVE_S1.);+#19267 = LINE('',#19268,#19269);+#19268 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,0.));+#19269 = VECTOR('',#19270,1.);+#19270 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#19271 = PCURVE('',#18303,#19272);+#19272 = DEFINITIONAL_REPRESENTATION('',(#19273),#19277);+#19273 = LINE('',#19274,#19275);+#19274 = CARTESIAN_POINT('',(-0.594729450677,-0.200512759219));+#19275 = VECTOR('',#19276,1.);+#19276 = DIRECTION('',(0.906183139987,0.422885465348));+#19277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19278 = PCURVE('',#18104,#19279);+#19279 = DEFINITIONAL_REPRESENTATION('',(#19280),#19284);+#19280 = LINE('',#19281,#19282);+#19281 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#19282 = VECTOR('',#19283,1.);+#19283 = DIRECTION('',(1.,0.));+#19284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19285 = ORIENTED_EDGE('',*,*,#19286,.F.);+#19286 = EDGE_CURVE('',#19287,#19264,#19289,.T.);+#19287 = VERTEX_POINT('',#19288);+#19288 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#19289 = SURFACE_CURVE('',#19290,(#19294,#19301),.PCURVE_S1.);+#19290 = LINE('',#19291,#19292);+#19291 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#19292 = VECTOR('',#19293,1.);+#19293 = DIRECTION('',(-1.,0.,0.));+#19294 = PCURVE('',#18303,#19295);+#19295 = DEFINITIONAL_REPRESENTATION('',(#19296),#19300);+#19296 = LINE('',#19297,#19298);+#19297 = CARTESIAN_POINT('',(-0.395267411253,-0.165763807489));+#19298 = VECTOR('',#19299,1.);+#19299 = DIRECTION('',(-1.,0.));+#19300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19301 = PCURVE('',#18076,#19302);+#19302 = DEFINITIONAL_REPRESENTATION('',(#19303),#19307);+#19303 = LINE('',#19304,#19305);+#19304 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19305 = VECTOR('',#19306,1.);+#19306 = DIRECTION('',(1.,0.));+#19307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19308 = ORIENTED_EDGE('',*,*,#19309,.T.);+#19309 = EDGE_CURVE('',#19287,#19310,#19312,.T.);+#19310 = VERTEX_POINT('',#19311);+#19311 = CARTESIAN_POINT('',(5.000000002838E-02,0.874999999996,0.));+#19312 = SURFACE_CURVE('',#19313,(#19317,#19324),.PCURVE_S1.);+#19313 = LINE('',#19314,#19315);+#19314 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#19315 = VECTOR('',#19316,1.);+#19316 = DIRECTION('',(0.,1.,0.));+#19317 = PCURVE('',#18303,#19318);+#19318 = DEFINITIONAL_REPRESENTATION('',(#19319),#19323);+#19319 = LINE('',#19320,#19321);+#19320 = CARTESIAN_POINT('',(-0.395267411253,-0.165763807489));+#19321 = VECTOR('',#19322,1.);+#19322 = DIRECTION('',(0.,1.));+#19323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19324 = PCURVE('',#18048,#19325);+#19325 = DEFINITIONAL_REPRESENTATION('',(#19326),#19330);+#19326 = LINE('',#19327,#19328);+#19327 = CARTESIAN_POINT('',(0.,0.));+#19328 = VECTOR('',#19329,1.);+#19329 = DIRECTION('',(1.,0.));+#19330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19331 = ORIENTED_EDGE('',*,*,#19332,.F.);+#19332 = EDGE_CURVE('',#19333,#19310,#19335,.T.);+#19333 = VERTEX_POINT('',#19334);+#19334 = CARTESIAN_POINT('',(-7.499999997159E-02,0.874999999996,0.));+#19335 = SURFACE_CURVE('',#19336,(#19340,#19347),.PCURVE_S1.);+#19336 = LINE('',#19337,#19338);+#19337 = CARTESIAN_POINT('',(-7.499999997159E-02,0.874999999996,0.));+#19338 = VECTOR('',#19339,1.);+#19339 = DIRECTION('',(1.,0.,0.));+#19340 = PCURVE('',#18303,#19341);+#19341 = DEFINITIONAL_REPRESENTATION('',(#19342),#19346);+#19342 = LINE('',#19343,#19344);+#19343 = CARTESIAN_POINT('',(-0.520267411253,8.4236192507E-02));+#19344 = VECTOR('',#19345,1.);+#19345 = DIRECTION('',(1.,0.));+#19346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19347 = PCURVE('',#18020,#19348);+#19348 = DEFINITIONAL_REPRESENTATION('',(#19349),#19353);+#19349 = LINE('',#19350,#19351);+#19350 = CARTESIAN_POINT('',(-6.595619994609E-09,0.));+#19351 = VECTOR('',#19352,1.);+#19352 = DIRECTION('',(1.,0.));+#19353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19354 = ORIENTED_EDGE('',*,*,#19355,.T.);+#19355 = EDGE_CURVE('',#19333,#18647,#19356,.T.);+#19356 = SURFACE_CURVE('',#19357,(#19361,#19368),.PCURVE_S1.);+#19357 = LINE('',#19358,#19359);+#19358 = CARTESIAN_POINT('',(-7.499999997159E-02,0.874999999996,0.));+#19359 = VECTOR('',#19360,1.);+#19360 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#19361 = PCURVE('',#18303,#19362);+#19362 = DEFINITIONAL_REPRESENTATION('',(#19363),#19367);+#19363 = LINE('',#19364,#19365);+#19364 = CARTESIAN_POINT('',(-0.520267411253,8.4236192507E-02));+#19365 = VECTOR('',#19366,1.);+#19366 = DIRECTION('',(-0.906183139987,0.422885465348));+#19367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19368 = PCURVE('',#17992,#19369);+#19369 = DEFINITIONAL_REPRESENTATION('',(#19370),#19374);+#19370 = LINE('',#19371,#19372);+#19371 = CARTESIAN_POINT('',(-8.31576340264E-12,-0.));+#19372 = VECTOR('',#19373,1.);+#19373 = DIRECTION('',(1.,0.));+#19374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19375 = ORIENTED_EDGE('',*,*,#18646,.T.);+#19376 = ORIENTED_EDGE('',*,*,#19377,.F.);+#19377 = EDGE_CURVE('',#19378,#18649,#19380,.T.);+#19378 = VERTEX_POINT('',#19379);+#19379 = CARTESIAN_POINT('',(-0.106284942226,0.960291256553,0.));+#19380 = SURFACE_CURVE('',#19381,(#19385,#19392),.PCURVE_S1.);+#19381 = LINE('',#19382,#19383);+#19382 = CARTESIAN_POINT('',(-0.106284942226,0.960291256553,0.));+#19383 = VECTOR('',#19384,1.);+#19384 = DIRECTION('',(-1.,0.,0.));+#19385 = PCURVE('',#18303,#19386);+#19386 = DEFINITIONAL_REPRESENTATION('',(#19387),#19391);+#19387 = LINE('',#19388,#19389);+#19388 = CARTESIAN_POINT('',(-0.551552353507,0.169527449064));+#19389 = VECTOR('',#19390,1.);+#19390 = DIRECTION('',(-1.,0.));+#19391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19392 = PCURVE('',#18809,#19393);+#19393 = DEFINITIONAL_REPRESENTATION('',(#19394),#19398);+#19394 = LINE('',#19395,#19396);+#19395 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19396 = VECTOR('',#19397,1.);+#19397 = DIRECTION('',(-1.,0.));+#19398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19399 = ORIENTED_EDGE('',*,*,#19400,.F.);+#19400 = EDGE_CURVE('',#19401,#19378,#19403,.T.);+#19401 = VERTEX_POINT('',#19402);+#19402 = CARTESIAN_POINT('',(-0.106284942226,1.040291256551,0.));+#19403 = SURFACE_CURVE('',#19404,(#19408,#19415),.PCURVE_S1.);+#19404 = LINE('',#19405,#19406);+#19405 = CARTESIAN_POINT('',(-0.106284942226,1.040291256551,0.));+#19406 = VECTOR('',#19407,1.);+#19407 = DIRECTION('',(0.,-1.,0.));+#19408 = PCURVE('',#18303,#19409);+#19409 = DEFINITIONAL_REPRESENTATION('',(#19410),#19414);+#19410 = LINE('',#19411,#19412);+#19411 = CARTESIAN_POINT('',(-0.551552353507,0.249527449062));+#19412 = VECTOR('',#19413,1.);+#19413 = DIRECTION('',(0.,-1.));+#19414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19415 = PCURVE('',#19416,#19421);+#19416 = PLANE('',#19417);+#19417 = AXIS2_PLACEMENT_3D('',#19418,#19419,#19420);+#19418 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19419 = DIRECTION('',(-1.,0.,0.));+#19420 = DIRECTION('',(0.,-1.,0.));+#19421 = DEFINITIONAL_REPRESENTATION('',(#19422),#19426);+#19422 = LINE('',#19423,#19424);+#19423 = CARTESIAN_POINT('',(1.013750127436,-0.1));+#19424 = VECTOR('',#19425,1.);+#19425 = DIRECTION('',(1.,0.));+#19426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19427 = ORIENTED_EDGE('',*,*,#19428,.F.);+#19428 = EDGE_CURVE('',#18717,#19401,#19429,.T.);+#19429 = SURFACE_CURVE('',#19430,(#19434,#19441),.PCURVE_S1.);+#19430 = LINE('',#19431,#19432);+#19431 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.));+#19432 = VECTOR('',#19433,1.);+#19433 = DIRECTION('',(1.,0.,0.));+#19434 = PCURVE('',#18303,#19435);+#19435 = DEFINITIONAL_REPRESENTATION('',(#19436),#19440);+#19436 = LINE('',#19437,#19438);+#19437 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#19438 = VECTOR('',#19439,1.);+#19439 = DIRECTION('',(1.,0.));+#19440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19441 = PCURVE('',#18755,#19442);+#19442 = DEFINITIONAL_REPRESENTATION('',(#19443),#19447);+#19443 = LINE('',#19444,#19445);+#19444 = CARTESIAN_POINT('',(5.925868487522E-02,0.1));+#19445 = VECTOR('',#19446,1.);+#19446 = DIRECTION('',(-1.,-0.));+#19447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19448 = ORIENTED_EDGE('',*,*,#18716,.T.);+#19449 = ORIENTED_EDGE('',*,*,#19450,.T.);+#19450 = EDGE_CURVE('',#18694,#19451,#19453,.T.);+#19451 = VERTEX_POINT('',#19452);+#19452 = CARTESIAN_POINT('',(-7.499999997402E-02,1.125000000002,0.));+#19453 = SURFACE_CURVE('',#19454,(#19458,#19465),.PCURVE_S1.);+#19454 = LINE('',#19455,#19456);+#19455 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,0.));+#19456 = VECTOR('',#19457,1.);+#19457 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#19458 = PCURVE('',#18303,#19459);+#19459 = DEFINITIONAL_REPRESENTATION('',(#19460),#19464);+#19460 = LINE('',#19461,#19462);+#19461 = CARTESIAN_POINT('',(-0.594729450677,0.299487240781));+#19462 = VECTOR('',#19463,1.);+#19463 = DIRECTION('',(0.90618313999,0.422885465342));+#19464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19465 = PCURVE('',#17936,#19466);+#19466 = DEFINITIONAL_REPRESENTATION('',(#19467),#19471);+#19467 = LINE('',#19468,#19469);+#19468 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#19469 = VECTOR('',#19470,1.);+#19470 = DIRECTION('',(1.,0.));+#19471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19472 = ORIENTED_EDGE('',*,*,#19473,.F.);+#19473 = EDGE_CURVE('',#19474,#19451,#19476,.T.);+#19474 = VERTEX_POINT('',#19475);+#19475 = CARTESIAN_POINT('',(5.000000002838E-02,1.125000000002,0.));+#19476 = SURFACE_CURVE('',#19477,(#19481,#19488),.PCURVE_S1.);+#19477 = LINE('',#19478,#19479);+#19478 = CARTESIAN_POINT('',(5.000000002838E-02,1.125000000002,0.));+#19479 = VECTOR('',#19480,1.);+#19480 = DIRECTION('',(-1.,0.,0.));+#19481 = PCURVE('',#18303,#19482);+#19482 = DEFINITIONAL_REPRESENTATION('',(#19483),#19487);+#19483 = LINE('',#19484,#19485);+#19484 = CARTESIAN_POINT('',(-0.395267411253,0.334236192513));+#19485 = VECTOR('',#19486,1.);+#19486 = DIRECTION('',(-1.,0.));+#19487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19488 = PCURVE('',#17908,#19489);+#19489 = DEFINITIONAL_REPRESENTATION('',(#19490),#19494);+#19490 = LINE('',#19491,#19492);+#19491 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19492 = VECTOR('',#19493,1.);+#19493 = DIRECTION('',(1.,0.));+#19494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19495 = ORIENTED_EDGE('',*,*,#19496,.T.);+#19496 = EDGE_CURVE('',#19474,#19497,#19499,.T.);+#19497 = VERTEX_POINT('',#19498);+#19498 = CARTESIAN_POINT('',(5.000000002838E-02,1.374999999998,0.));+#19499 = SURFACE_CURVE('',#19500,(#19504,#19511),.PCURVE_S1.);+#19500 = LINE('',#19501,#19502);+#19501 = CARTESIAN_POINT('',(5.000000002838E-02,1.125000000002,0.));+#19502 = VECTOR('',#19503,1.);+#19503 = DIRECTION('',(0.,1.,0.));+#19504 = PCURVE('',#18303,#19505);+#19505 = DEFINITIONAL_REPRESENTATION('',(#19506),#19510);+#19506 = LINE('',#19507,#19508);+#19507 = CARTESIAN_POINT('',(-0.395267411253,0.334236192513));+#19508 = VECTOR('',#19509,1.);+#19509 = DIRECTION('',(0.,1.));+#19510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19511 = PCURVE('',#17880,#19512);+#19512 = DEFINITIONAL_REPRESENTATION('',(#19513),#19517);+#19513 = LINE('',#19514,#19515);+#19514 = CARTESIAN_POINT('',(1.99995575656E-12,0.));+#19515 = VECTOR('',#19516,1.);+#19516 = DIRECTION('',(1.,0.));+#19517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19518 = ORIENTED_EDGE('',*,*,#19519,.F.);+#19519 = EDGE_CURVE('',#19520,#19497,#19522,.T.);+#19520 = VERTEX_POINT('',#19521);+#19521 = CARTESIAN_POINT('',(-7.499999997524E-02,1.374999999998,0.));+#19522 = SURFACE_CURVE('',#19523,(#19527,#19534),.PCURVE_S1.);+#19523 = LINE('',#19524,#19525);+#19524 = CARTESIAN_POINT('',(-7.499999997524E-02,1.374999999998,0.));+#19525 = VECTOR('',#19526,1.);+#19526 = DIRECTION('',(1.,0.,0.));+#19527 = PCURVE('',#18303,#19528);+#19528 = DEFINITIONAL_REPRESENTATION('',(#19529),#19533);+#19529 = LINE('',#19530,#19531);+#19530 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#19531 = VECTOR('',#19532,1.);+#19532 = DIRECTION('',(1.,0.));+#19533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19534 = PCURVE('',#17852,#19535);+#19535 = DEFINITIONAL_REPRESENTATION('',(#19536),#19540);+#19536 = LINE('',#19537,#19538);+#19537 = CARTESIAN_POINT('',(-6.599269991581E-09,0.));+#19538 = VECTOR('',#19539,1.);+#19539 = DIRECTION('',(1.,0.));+#19540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19541 = ORIENTED_EDGE('',*,*,#19542,.T.);+#19542 = EDGE_CURVE('',#19520,#18825,#19543,.T.);+#19543 = SURFACE_CURVE('',#19544,(#19548,#19555),.PCURVE_S1.);+#19544 = LINE('',#19545,#19546);+#19545 = CARTESIAN_POINT('',(-7.499999997524E-02,1.374999999998,0.));+#19546 = VECTOR('',#19547,1.);+#19547 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#19548 = PCURVE('',#18303,#19549);+#19549 = DEFINITIONAL_REPRESENTATION('',(#19550),#19554);+#19550 = LINE('',#19551,#19552);+#19551 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#19552 = VECTOR('',#19553,1.);+#19553 = DIRECTION('',(-0.90618313999,0.422885465342));+#19554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19555 = PCURVE('',#17824,#19556);+#19556 = DEFINITIONAL_REPRESENTATION('',(#19557),#19561);+#19557 = LINE('',#19558,#19559);+#19558 = CARTESIAN_POINT('',(-4.162359949872E-12,-0.));+#19559 = VECTOR('',#19560,1.);+#19560 = DIRECTION('',(1.,0.));+#19561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19562 = ORIENTED_EDGE('',*,*,#18824,.T.);+#19563 = ORIENTED_EDGE('',*,*,#19564,.F.);+#19564 = EDGE_CURVE('',#19565,#18827,#19567,.T.);+#19565 = VERTEX_POINT('',#19566);+#19566 = CARTESIAN_POINT('',(-0.106284942226,1.460291256555,0.));+#19567 = SURFACE_CURVE('',#19568,(#19572,#19579),.PCURVE_S1.);+#19568 = LINE('',#19569,#19570);+#19569 = CARTESIAN_POINT('',(-0.106284942226,1.460291256555,0.));+#19570 = VECTOR('',#19571,1.);+#19571 = DIRECTION('',(-1.,0.,0.));+#19572 = PCURVE('',#18303,#19573);+#19573 = DEFINITIONAL_REPRESENTATION('',(#19574),#19578);+#19574 = LINE('',#19575,#19576);+#19575 = CARTESIAN_POINT('',(-0.551552353507,0.669527449066));+#19576 = VECTOR('',#19577,1.);+#19577 = DIRECTION('',(-1.,0.));+#19578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19579 = PCURVE('',#18987,#19580);+#19580 = DEFINITIONAL_REPRESENTATION('',(#19581),#19585);+#19581 = LINE('',#19582,#19583);+#19582 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19583 = VECTOR('',#19584,1.);+#19584 = DIRECTION('',(-1.,0.));+#19585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19586 = ORIENTED_EDGE('',*,*,#19587,.F.);+#19587 = EDGE_CURVE('',#19588,#19565,#19590,.T.);+#19588 = VERTEX_POINT('',#19589);+#19589 = CARTESIAN_POINT('',(-0.106284942226,1.540291256553,0.));+#19590 = SURFACE_CURVE('',#19591,(#19595,#19602),.PCURVE_S1.);+#19591 = LINE('',#19592,#19593);+#19592 = CARTESIAN_POINT('',(-0.106284942226,1.540291256553,0.));+#19593 = VECTOR('',#19594,1.);+#19594 = DIRECTION('',(0.,-1.,0.));+#19595 = PCURVE('',#18303,#19596);+#19596 = DEFINITIONAL_REPRESENTATION('',(#19597),#19601);+#19597 = LINE('',#19598,#19599);+#19598 = CARTESIAN_POINT('',(-0.551552353507,0.749527449064));+#19599 = VECTOR('',#19600,1.);+#19600 = DIRECTION('',(0.,-1.));+#19601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19602 = PCURVE('',#19603,#19608);+#19603 = PLANE('',#19604);+#19604 = AXIS2_PLACEMENT_3D('',#19605,#19606,#19607);+#19605 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19606 = DIRECTION('',(-1.,0.,0.));+#19607 = DIRECTION('',(0.,-1.,0.));+#19608 = DEFINITIONAL_REPRESENTATION('',(#19609),#19613);+#19609 = LINE('',#19610,#19611);+#19610 = CARTESIAN_POINT('',(0.513750127434,-0.1));+#19611 = VECTOR('',#19612,1.);+#19612 = DIRECTION('',(1.,0.));+#19613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19614 = ORIENTED_EDGE('',*,*,#19615,.F.);+#19615 = EDGE_CURVE('',#18895,#19588,#19616,.T.);+#19616 = SURFACE_CURVE('',#19617,(#19621,#19628),.PCURVE_S1.);+#19617 = LINE('',#19618,#19619);+#19618 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.));+#19619 = VECTOR('',#19620,1.);+#19620 = DIRECTION('',(1.,0.,0.));+#19621 = PCURVE('',#18303,#19622);+#19622 = DEFINITIONAL_REPRESENTATION('',(#19623),#19627);+#19623 = LINE('',#19624,#19625);+#19624 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#19625 = VECTOR('',#19626,1.);+#19626 = DIRECTION('',(1.,0.));+#19627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19628 = PCURVE('',#18933,#19629);+#19629 = DEFINITIONAL_REPRESENTATION('',(#19630),#19634);+#19630 = LINE('',#19631,#19632);+#19631 = CARTESIAN_POINT('',(5.925868487522E-02,0.1));+#19632 = VECTOR('',#19633,1.);+#19633 = DIRECTION('',(-1.,-0.));+#19634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19635 = ORIENTED_EDGE('',*,*,#18894,.T.);+#19636 = ORIENTED_EDGE('',*,*,#19637,.T.);+#19637 = EDGE_CURVE('',#18872,#19638,#19640,.T.);+#19638 = VERTEX_POINT('',#19639);+#19639 = CARTESIAN_POINT('',(-7.499999997037E-02,1.625000000004,0.));+#19640 = SURFACE_CURVE('',#19641,(#19645,#19652),.PCURVE_S1.);+#19641 = LINE('',#19642,#19643);+#19642 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,0.));+#19643 = VECTOR('',#19644,1.);+#19644 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#19645 = PCURVE('',#18303,#19646);+#19646 = DEFINITIONAL_REPRESENTATION('',(#19647),#19651);+#19647 = LINE('',#19648,#19649);+#19648 = CARTESIAN_POINT('',(-0.594729450677,0.799487240781));+#19649 = VECTOR('',#19650,1.);+#19650 = DIRECTION('',(0.90618313999,0.422885465342));+#19651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19652 = PCURVE('',#17768,#19653);+#19653 = DEFINITIONAL_REPRESENTATION('',(#19654),#19658);+#19654 = LINE('',#19655,#19656);+#19655 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#19656 = VECTOR('',#19657,1.);+#19657 = DIRECTION('',(1.,0.));+#19658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19659 = ORIENTED_EDGE('',*,*,#19660,.F.);+#19660 = EDGE_CURVE('',#19661,#19638,#19663,.T.);+#19661 = VERTEX_POINT('',#19662);+#19662 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000004,0.));+#19663 = SURFACE_CURVE('',#19664,(#19668,#19675),.PCURVE_S1.);+#19664 = LINE('',#19665,#19666);+#19665 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000004,0.));+#19666 = VECTOR('',#19667,1.);+#19667 = DIRECTION('',(-1.,0.,0.));+#19668 = PCURVE('',#18303,#19669);+#19669 = DEFINITIONAL_REPRESENTATION('',(#19670),#19674);+#19670 = LINE('',#19671,#19672);+#19671 = CARTESIAN_POINT('',(-0.395267411253,0.834236192515));+#19672 = VECTOR('',#19673,1.);+#19673 = DIRECTION('',(-1.,0.));+#19674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19675 = PCURVE('',#17740,#19676);+#19676 = DEFINITIONAL_REPRESENTATION('',(#19677),#19681);+#19677 = LINE('',#19678,#19679);+#19678 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19679 = VECTOR('',#19680,1.);+#19680 = DIRECTION('',(1.,0.));+#19681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19682 = ORIENTED_EDGE('',*,*,#19683,.T.);+#19683 = EDGE_CURVE('',#19661,#19684,#19686,.T.);+#19684 = VERTEX_POINT('',#19685);+#19685 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,0.));+#19686 = SURFACE_CURVE('',#19687,(#19691,#19698),.PCURVE_S1.);+#19687 = LINE('',#19688,#19689);+#19688 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000004,0.));+#19689 = VECTOR('',#19690,1.);+#19690 = DIRECTION('',(2.026727863371E-04,0.999999979462,0.));+#19691 = PCURVE('',#18303,#19692);+#19692 = DEFINITIONAL_REPRESENTATION('',(#19693),#19697);+#19693 = LINE('',#19694,#19695);+#19694 = CARTESIAN_POINT('',(-0.395267411253,0.834236192515));+#19695 = VECTOR('',#19696,1.);+#19696 = DIRECTION('',(2.026727863371E-04,0.999999979462));+#19697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19698 = PCURVE('',#17712,#19699);+#19699 = DEFINITIONAL_REPRESENTATION('',(#19700),#19704);+#19700 = LINE('',#19701,#19702);+#19701 = CARTESIAN_POINT('',(3.999911595509E-12,0.));+#19702 = VECTOR('',#19703,1.);+#19703 = DIRECTION('',(1.,0.));+#19704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19705 = ORIENTED_EDGE('',*,*,#19706,.T.);+#19706 = EDGE_CURVE('',#19684,#19707,#19709,.T.);+#19707 = VERTEX_POINT('',#19708);+#19708 = CARTESIAN_POINT('',(1.049999999858,1.824906848609,0.));+#19709 = SURFACE_CURVE('',#19710,(#19714,#19721),.PCURVE_S1.);+#19710 = LINE('',#19711,#19712);+#19711 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,0.));+#19712 = VECTOR('',#19713,1.);+#19713 = DIRECTION('',(1.,1.178638311891E-11,0.));+#19714 = PCURVE('',#18303,#19715);+#19715 = DEFINITIONAL_REPRESENTATION('',(#19716),#19720);+#19716 = LINE('',#19717,#19718);+#19717 = CARTESIAN_POINT('',(-0.395226895574,1.03414304112));+#19718 = VECTOR('',#19719,1.);+#19719 = DIRECTION('',(1.,1.178638311891E-11));+#19720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19721 = PCURVE('',#17684,#19722);+#19722 = DEFINITIONAL_REPRESENTATION('',(#19723),#19727);+#19723 = LINE('',#19724,#19725);+#19724 = CARTESIAN_POINT('',(0.,0.));+#19725 = VECTOR('',#19726,1.);+#19726 = DIRECTION('',(1.,0.));+#19727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19728 = ORIENTED_EDGE('',*,*,#19729,.T.);+#19729 = EDGE_CURVE('',#19707,#19730,#19732,.T.);+#19730 = VERTEX_POINT('',#19731);+#19731 = CARTESIAN_POINT('',(1.150000000028,1.724906848557,0.));+#19732 = SURFACE_CURVE('',#19733,(#19738,#19749),.PCURVE_S1.);+#19733 = CIRCLE('',#19734,0.100000000003);+#19734 = AXIS2_PLACEMENT_3D('',#19735,#19736,#19737);+#19735 = CARTESIAN_POINT('',(1.050000000014,1.724906848606,0.));+#19736 = DIRECTION('',(0.,0.,-1.));+#19737 = DIRECTION('',(-1.55373935935E-09,1.,0.));+#19738 = PCURVE('',#18303,#19739);+#19739 = DEFINITIONAL_REPRESENTATION('',(#19740),#19748);+#19740 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#19741,#19742,#19743,#19744+    ,#19745,#19746,#19747),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#19741 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#19742 = CARTESIAN_POINT('',(0.77793766934,1.034143041389));+#19743 = CARTESIAN_POINT('',(0.691335129192,0.88414304125));+#19744 = CARTESIAN_POINT('',(0.604732589044,0.734143041111));+#19745 = CARTESIAN_POINT('',(0.51813004843,0.884143040981));+#19746 = CARTESIAN_POINT('',(0.431527507816,1.034143040851));+#19747 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#19748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19749 = PCURVE('',#17656,#19750);+#19750 = DEFINITIONAL_REPRESENTATION('',(#19751),#19755);+#19751 = LINE('',#19752,#19753);+#19752 = CARTESIAN_POINT('',(-1.553739359395E-09,0.));+#19753 = VECTOR('',#19754,1.);+#19754 = DIRECTION('',(1.,0.));+#19755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19756 = ORIENTED_EDGE('',*,*,#19757,.T.);+#19757 = EDGE_CURVE('',#19730,#19758,#19760,.T.);+#19758 = VERTEX_POINT('',#19759);+#19759 = CARTESIAN_POINT('',(1.150000000041,-0.125000000009,0.));+#19760 = SURFACE_CURVE('',#19761,(#19765,#19772),.PCURVE_S1.);+#19761 = LINE('',#19762,#19763);+#19762 = CARTESIAN_POINT('',(1.150000000028,1.724906848557,0.));+#19763 = VECTOR('',#19764,1.);+#19764 = DIRECTION('',(4.465841930061E-12,-1.,0.));+#19765 = PCURVE('',#18303,#19766);+#19766 = DEFINITIONAL_REPRESENTATION('',(#19767),#19771);+#19767 = LINE('',#19768,#19769);+#19768 = CARTESIAN_POINT('',(0.704732588747,0.934143041068));+#19769 = VECTOR('',#19770,1.);+#19770 = DIRECTION('',(4.465841930061E-12,-1.));+#19771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19772 = PCURVE('',#17623,#19773);+#19773 = DEFINITIONAL_REPRESENTATION('',(#19774),#19778);+#19774 = LINE('',#19775,#19776);+#19775 = CARTESIAN_POINT('',(5.199995989358E-11,0.));+#19776 = VECTOR('',#19777,1.);+#19777 = DIRECTION('',(1.,0.));+#19778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19779 = ORIENTED_EDGE('',*,*,#19780,.T.);+#19780 = EDGE_CURVE('',#19758,#19781,#19783,.T.);+#19781 = VERTEX_POINT('',#19782);+#19782 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,0.));+#19783 = SURFACE_CURVE('',#19784,(#19789,#19800),.PCURVE_S1.);+#19784 = CIRCLE('',#19785,9.999999999127E-02);+#19785 = AXIS2_PLACEMENT_3D('',#19786,#19787,#19788);+#19786 = CARTESIAN_POINT('',(1.05000000005,-0.124999999946,0.));+#19787 = DIRECTION('',(0.,0.,-1.));+#19788 = DIRECTION('',(1.,-6.266538677405E-10,0.));+#19789 = PCURVE('',#18303,#19790);+#19790 = DEFINITIONAL_REPRESENTATION('',(#19791),#19799);+#19791 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#19792,#19793,#19794,#19795+    ,#19796,#19797,#19798),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+    2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#19792 = CARTESIAN_POINT('',(0.70473258876,-0.915763807498));+#19793 = CARTESIAN_POINT('',(0.704732588652,-1.088968888239));+#19794 = CARTESIAN_POINT('',(0.554732588719,-1.002366347775));+#19795 = CARTESIAN_POINT('',(0.404732588786,-0.91576380731));+#19796 = CARTESIAN_POINT('',(0.554732588828,-0.829161267033));+#19797 = CARTESIAN_POINT('',(0.704732588869,-0.742558726756));+#19798 = CARTESIAN_POINT('',(0.70473258876,-0.915763807498));+#19799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19800 = PCURVE('',#17595,#19801);+#19801 = DEFINITIONAL_REPRESENTATION('',(#19802),#19806);+#19802 = LINE('',#19803,#19804);+#19803 = CARTESIAN_POINT('',(0.,0.));+#19804 = VECTOR('',#19805,1.);+#19805 = DIRECTION('',(1.,0.));+#19806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19807 = ORIENTED_EDGE('',*,*,#19808,.T.);+#19808 = EDGE_CURVE('',#19781,#19809,#19811,.T.);+#19809 = VERTEX_POINT('',#19810);+#19810 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,0.));+#19811 = SURFACE_CURVE('',#19812,(#19816,#19823),.PCURVE_S1.);+#19812 = LINE('',#19813,#19814);+#19813 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,0.));+#19814 = VECTOR('',#19815,1.);+#19815 = DIRECTION('',(-1.,-6.308689681743E-11,0.));+#19816 = PCURVE('',#18303,#19817);+#19817 = DEFINITIONAL_REPRESENTATION('',(#19818),#19822);+#19818 = LINE('',#19819,#19820);+#19819 = CARTESIAN_POINT('',(0.604732588751,-1.015763807426));+#19820 = VECTOR('',#19821,1.);+#19821 = DIRECTION('',(-1.,-6.308689681743E-11));+#19822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19823 = PCURVE('',#17562,#19824);+#19824 = DEFINITIONAL_REPRESENTATION('',(#19825),#19829);+#19825 = LINE('',#19826,#19827);+#19826 = CARTESIAN_POINT('',(0.,0.));+#19827 = VECTOR('',#19828,1.);+#19828 = DIRECTION('',(1.,0.));+#19829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#19830 = ORIENTED_EDGE('',*,*,#19831,.T.);+#19831 = EDGE_CURVE('',#19809,#19832,#19834,.T.);+#19832 = VERTEX_POINT('',#19833);+#19833 = CARTESIAN_POINT('',(5.000000002838E-02,-0.124999999998,0.));+#19834 = SURFACE_CURVE('',#19835,(#19839,#19846),.PCURVE_S1.);+#19835 = LINE('',#19836,#19837);+#19836 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,0.));+#19837 = VECTOR('',#19838,1.);+#19838 = DIRECTION('',(0.,1.,0.));+#19839 = PCURVE('',#18303,#19840);+#19840 = DEFINITIONAL_REPRESENTATION('',(#19841),#19845);+#19841 = LINE('',#19842,#19843);