component
TPSM33620S5QRDNRQ1
Public Made by Adomby adom
Texas Instruments DC DC Converters, QFN-11(3.5x4.5). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.
← Commit history
Add component CAD, datasheet and docs (1)
3 files changed
+23957−1
diff truncated
README.md+48−1@@ -1,3 +1,50 @@ # TPSM33620S5QRDNRQ1 -Texas Instruments DC DC Converters, QFN-11(3.5x4.5). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.+::adom-verified{src="/adom/tpsm33620s5qrdnrq1/render/verification.json"}++**Texas Instruments** · DC DC Converters · QFN-11(3.5x4.5)++TPSM33620S5QRDNRQ1 from Texas Instruments, in a QFN-11(3.5x4.5). Symbol, footprint and 3D model are the ones used on Adom board designs (3D model extracted from the board STEP export, seated in the footprint frame). Pin functions are extracted from the manufacturer datasheet with page references. **Staged for validation: see the open items in the verification log above.**++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGOOD | output | Power-good monitor. Open-drain output that asserts low when the feedback voltage is outside the specified window thresholds. Requires a 10kΩ to 100kΩ pullup resistor; may be left open or tied to GND if unused. High = power OK, Low = power bad; PGOOD goes low when EN is Low. [datasheet p.5] |+| 2 | EN | input | Precision enable input. High = ON, Low = OFF. Can be tied directly to VIN, driven by an open-drain/collector device, or used with an external VIN-to-GND resistor divider to set an adjustable UVLO threshold. Do not float this pin. [datasheet p.5] |+| 3 | VIN | power_in | Input supply voltage, 3V to 36V operating range. Connect the input supply and a high-quality bypass capacitor directly to this pin and GND in close proximity to the module. [datasheet p.5] |+| 4 | VOUT | power_out | Output voltage pin, connected internally to the integrated filter inductor. Connect external output capacitors between this pin and GND, and route to the load. For the S5 fixed-output configuration, tie FB (pin 9) directly to this pin for 5V output; for adjustable operation feed a resistor divider from this pin into FB. [datasheet p.5] |+| 5 | SW | passive | Power module internal switch node (connected in parallel with pin 6). Do not place any external component on this pin or connect to any signal. The copper area on this pin must be kept small to prevent noise and EMI issues. [datasheet p.5] |+| 6 | SW | passive | Power module internal switch node (connected in parallel with pin 6). Do not place any external component on this pin or connect to any signal. The copper area on this pin must be kept small to prevent noise and EMI issues. [datasheet p.5] |+| 7 | BOOT | input | Bootstrap pin for the internal high-side gate driver. A 100nF bootstrap capacitor is already connected internally from this pin to the SW node inside the module; no external bootstrap component is required. [datasheet p.5] |+| 8 | VCC | output | Internal LDO output used to supply the device's internal control circuitry. Do not connect to external loads. Can be used as the logic supply for a PGOOD pullup. Connect a high-quality 1µF ceramic capacitor from this pin to GND. [datasheet p.5] |+| 9 | FB | input | Feedback input to the error amplifier. For the S5 fixed 5V output, tie this pin directly to VOUT (pin 4). For adjustable operation, connect the mid-point of the RFBT/RFBB divider between VOUT and GND to this pin; keep the FB trace short and small to minimize noise coupling. Do not leave open or connect to GND. [datasheet p.5] |+| 10 | GND | power_in | Power ground terminal and system reference. Connect to the input capacitor CIN with short, wide traces and to the output capacitor return. [datasheet p.5] |+| 11 | MODE/SYNC | input | Mode select and external synchronization input. The DC voltage on this pin selects between Auto (pulse-skipping / light-load efficiency) and forced-PWM operation. An external clock applied to this pin synchronizes the converter's switching to the rising edge of the clock. Do not float this pin. [datasheet p.5] |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-11(3.5x4.5) |+| Category | Power Modules |+| Pins | 11 |+| LCSC | C51956999 |+| Distributor summary (LCSC listing, not datasheet) | QFN-11(3.5x4.5) DC-DC Power Modules ROHS |++## CAD++- Symbol: `tpsm33620s5qrdnrq1` (source library `Connector_Generic:Conn_02x03_Odd_Even`)+- Footprint: `Regulator_CDT:TPSM336_int-buck`+- 3D model path in footprint: `${KIPRJMOD}/tpsm33620s5qrdnrq1.step`+- 3D files: `tpsm33620s5qrdnrq1-etched.step` / `tpsm33620s5qrdnrq1-etched.glb` carry the MPN etch as a separate `Adom.LaserEtch` part; `tpsm33620s5qrdnrq1.step` / `tpsm33620s5qrdnrq1.glb` are the bare model.+- EAGLE/Fusion library: `tpsm33620s5qrdnrq1.lbr` (adom-lbr)++## Provenance++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tpsm33620-q1.pdf) (sha256 `9ecee6f360918744`, retrieved 2026-10-16, tier: mfr)+- **CAD:** Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export.+- **Pins:** KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7).++[Datasheet PDF](docs/tpsm33620s5qrdnrq1-datasheet.pdf)
tpsm33620s5qrdnrq1-etched.glbadded⋯ 1 unchanged line ⋯
tpsm33620s5qrdnrq1-etched.stepadded+23909@@ -0,0 +1,52692 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-16T23:28:26',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('TPSM33620S5QRDNRQ1','TPSM33620S5QRDNRQ1','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,-2.99999999978E-03));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('Open CASCADE STEP translator 7.9 8',+ 'Open CASCADE STEP translator 7.9 8','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = SHAPE_REPRESENTATION('',(#11,#37),#41);+#37 = AXIS2_PLACEMENT_3D('',#38,#39,#40);+#38 = CARTESIAN_POINT('',(0.,0.,0.));+#39 = DIRECTION('',(0.,0.,1.));+#40 = DIRECTION('',(1.,0.,0.));+#41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#45)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#42,#43,#44)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#42 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#43 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#44 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#45 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#42,+ 'distance_accuracy_value','confusion accuracy');+#46 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#47,#49);+#47 = ( REPRESENTATION_RELATIONSHIP('','',#36,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#48) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#48 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#49 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#50);+#50 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('15','=>[0:1:1:2]','',#5,#31,$);+#51 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33));+#52 = SHAPE_DEFINITION_REPRESENTATION(#53,#59);+#53 = PRODUCT_DEFINITION_SHAPE('','',#54);+#54 = PRODUCT_DEFINITION('design','',#55,#58);+#55 = PRODUCT_DEFINITION_FORMATION('','',#56);+#56 = PRODUCT('TPSM336_Buck','TPSM336_Buck','',(#57));+#57 = PRODUCT_CONTEXT('',#2,'mechanical');+#58 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#59 = SHAPE_REPRESENTATION('',(#11,#60),#64);+#60 = AXIS2_PLACEMENT_3D('',#61,#62,#63);+#61 = CARTESIAN_POINT('',(0.,0.,0.));+#62 = DIRECTION('',(0.,0.,1.));+#63 = DIRECTION('',(1.,0.,0.));+#64 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#68)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#65,#66,#67)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#65 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#66 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#67 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#68 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#65,+ 'distance_accuracy_value','confusion accuracy');+#69 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#70,#72);+#70 = ( REPRESENTATION_RELATIONSHIP('','',#59,#36) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#71) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#71 = ITEM_DEFINED_TRANSFORMATION('','',#11,#37);+#72 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#73);+#73 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('14','56','',#31,#54,$);+#74 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#56));+#75 = SHAPE_DEFINITION_REPRESENTATION(#76,#82);+#76 = PRODUCT_DEFINITION_SHAPE('','',#77);+#77 = PRODUCT_DEFINITION('design','',#78,#81);+#78 = PRODUCT_DEFINITION_FORMATION('','',#79);+#79 = PRODUCT('RDN0011A_ASM','RDN0011A_ASM','',(#80));+#80 = PRODUCT_CONTEXT('',#2,'mechanical');+#81 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#82 = SHAPE_REPRESENTATION('',(#11,#83,#87),#91);+#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86);+#84 = CARTESIAN_POINT('',(-1.75,-2.25,3.185595530422E-02));+#85 = DIRECTION('',(0.,0.,1.));+#86 = DIRECTION('',(1.,0.,0.));+#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90);+#88 = CARTESIAN_POINT('',(-1.600537960604,-1.814307338501,0.125));+#89 = DIRECTION('',(0.,0.,1.));+#90 = DIRECTION('',(1.,0.,0.));+#91 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#92,#93,#94)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#92 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#93 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#94 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#95 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#92,+ 'distance_accuracy_value','confusion accuracy');+#96 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#97,#99);+#97 = ( REPRESENTATION_RELATIONSHIP('','',#82,#59) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#98 = ITEM_DEFINED_TRANSFORMATION('','',#11,#60);+#99 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#100);+#100 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('13','=>0:1:1:4','',#54,#77,$);+#101 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#79));+#102 = SHAPE_DEFINITION_REPRESENTATION(#103,#109);+#103 = PRODUCT_DEFINITION_SHAPE('','',#104);+#104 = PRODUCT_DEFINITION('design','',#105,#108);+#105 = PRODUCT_DEFINITION_FORMATION('','',#106);+#106 = PRODUCT('MOLD_CPOMPOUND_AF0','MOLD_CPOMPOUND_AF0','',(#107));+#107 = PRODUCT_CONTEXT('',#2,'mechanical');+#108 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#109 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#110),#17367);+#110 = MANIFOLD_SOLID_BREP('',#111);+#111 = CLOSED_SHELL('',(#112,#232,#536,#707,#878,#1049,#3677,#3848,#4019+ ,#4190,#4266,#5511,#5706,#5733,#5760,#5787,#5814,#5821,#5870,#5919,+ #5946,#5953,#6002,#6051,#6100,#6215,#6264,#6906,#6955,#7004,#7080,+ #7107,#7156,#7300,#7327,#7354,#7381,#7388,#7415,#7422,#7429,#7670,+ #7697,#7724,#7751,#7778,#7805,#7832,#7839,#7888,#7937,#7964,#7971,+ #8020,#8069,#8118,#8171,#8220,#8269,#8296,#8380,#8429,#8478,#8505,+ #8512,#9764,#10663,#10858,#10907,#10956,#11027,#11098,#11169,#11240,+ #11428,#11455,#11502,#11549,#11596,#11643,#11650,#11657,#11664,+ #11671,#11678,#11685,#11692,#11699,#11706,#11755,#11896,#11923,+ #11950,#11977,#12004,#12031,#12038,#12065,#12092,#12119,#12146,+ #12153,#12180,#12207,#12234,#12261,#12268,#12295,#12322,#12349,+ #12376,#12383,#12410,#12437,#12464,#12491,#12518,#12545,#12572,+ #12599,#12626,#12653,#12660,#12687,#12714,#12741,#12768,#12775,+ #12824,#12873,#12922,#12971,#13025,#13074,#13128,#13177,#13204,+ #13290,#13339,#13388,#13415,#13422,#13471,#13520,#13574,#13623,+ #13650,#13732,#13781,#13830,#13857,#13864,#13913,#13962,#14011,+ #14065,#14114,#14163,#14190,#14274,#14323,#14372,#14399,#14406,+ #14455,#14504,#14553,#14602,#14656,#14705,#14758,#14807,#14856,+ #14905,#14932,#15559,#15608,#15679,#15750,#15821,#15870,#16058,+ #16085,#16112,#16159,#16186,#16233,#16240,#16247,#16254,#16261,+ #16268,#16275,#16324,#16465,#16492,#16519,#16546,#16573,#16600,+ #16607,#16634,#16661,#16688,#16695,#16722,#16749,#16776,#16803,+ #16810,#16837,#16864,#16891,#16918,#16925,#16974,#17023,#17077,+ #17126,#17153,#17235,#17284,#17333,#17360));+#112 = ADVANCED_FACE('',(#113),#127,.T.);+#113 = FACE_BOUND('',#114,.F.);+#114 = EDGE_LOOP('',(#115,#150,#178,#206));+#115 = ORIENTED_EDGE('',*,*,#116,.T.);+#116 = EDGE_CURVE('',#117,#119,#121,.T.);+#117 = VERTEX_POINT('',#118);+#118 = CARTESIAN_POINT('',(3.5,0.,1.9));+#119 = VERTEX_POINT('',#120);+#120 = CARTESIAN_POINT('',(0.,0.,1.9));+#121 = SURFACE_CURVE('',#122,(#126,#138),.PCURVE_S1.);+#122 = LINE('',#123,#124);+#123 = CARTESIAN_POINT('',(3.5,0.,1.9));+#124 = VECTOR('',#125,1.);+#125 = DIRECTION('',(-1.,0.,0.));+#126 = PCURVE('',#127,#132);+#127 = PLANE('',#128);+#128 = AXIS2_PLACEMENT_3D('',#129,#130,#131);+#129 = CARTESIAN_POINT('',(1.75,2.25,1.9));+#130 = DIRECTION('',(0.,0.,1.));+#131 = DIRECTION('',(1.,0.,-0.));+#132 = DEFINITIONAL_REPRESENTATION('',(#133),#137);+#133 = LINE('',#134,#135);+#134 = CARTESIAN_POINT('',(1.75,-2.25));+#135 = VECTOR('',#136,1.);+#136 = DIRECTION('',(-1.,0.));+#137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#138 = PCURVE('',#139,#144);+#139 = PLANE('',#140);+#140 = AXIS2_PLACEMENT_3D('',#141,#142,#143);+#141 = CARTESIAN_POINT('',(0.,0.,0.));+#142 = DIRECTION('',(0.,-1.,0.));+#143 = DIRECTION('',(1.,0.,0.));+#144 = DEFINITIONAL_REPRESENTATION('',(#145),#149);+#145 = LINE('',#146,#147);+#146 = CARTESIAN_POINT('',(3.5,1.9));+#147 = VECTOR('',#148,1.);+#148 = DIRECTION('',(-1.,0.));+#149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#150 = ORIENTED_EDGE('',*,*,#151,.T.);+#151 = EDGE_CURVE('',#119,#152,#154,.T.);+#152 = VERTEX_POINT('',#153);+#153 = CARTESIAN_POINT('',(0.,4.5,1.9));+#154 = SURFACE_CURVE('',#155,(#159,#166),.PCURVE_S1.);+#155 = LINE('',#156,#157);+#156 = CARTESIAN_POINT('',(0.,0.,1.9));+#157 = VECTOR('',#158,1.);+#158 = DIRECTION('',(0.,1.,0.));+#159 = PCURVE('',#127,#160);+#160 = DEFINITIONAL_REPRESENTATION('',(#161),#165);+#161 = LINE('',#162,#163);+#162 = CARTESIAN_POINT('',(-1.75,-2.25));+#163 = VECTOR('',#164,1.);+#164 = DIRECTION('',(0.,1.));+#165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#166 = PCURVE('',#167,#172);+#167 = PLANE('',#168);+#168 = AXIS2_PLACEMENT_3D('',#169,#170,#171);+#169 = CARTESIAN_POINT('',(0.,4.5,0.));+#170 = DIRECTION('',(-1.,0.,0.));+#171 = DIRECTION('',(0.,-1.,0.));+#172 = DEFINITIONAL_REPRESENTATION('',(#173),#177);+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(4.5,1.9));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(-1.,0.));+#177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#178 = ORIENTED_EDGE('',*,*,#179,.T.);+#179 = EDGE_CURVE('',#152,#180,#182,.T.);+#180 = VERTEX_POINT('',#181);+#181 = CARTESIAN_POINT('',(3.5,4.5,1.9));+#182 = SURFACE_CURVE('',#183,(#187,#194),.PCURVE_S1.);+#183 = LINE('',#184,#185);+#184 = CARTESIAN_POINT('',(0.,4.5,1.9));+#185 = VECTOR('',#186,1.);+#186 = DIRECTION('',(1.,0.,0.));+#187 = PCURVE('',#127,#188);+#188 = DEFINITIONAL_REPRESENTATION('',(#189),#193);+#189 = LINE('',#190,#191);+#190 = CARTESIAN_POINT('',(-1.75,2.25));+#191 = VECTOR('',#192,1.);+#192 = DIRECTION('',(1.,0.));+#193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#194 = PCURVE('',#195,#200);+#195 = PLANE('',#196);+#196 = AXIS2_PLACEMENT_3D('',#197,#198,#199);+#197 = CARTESIAN_POINT('',(3.5,4.5,0.));+#198 = DIRECTION('',(0.,1.,0.));+#199 = DIRECTION('',(-1.,0.,0.));+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(3.5,1.9));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(-1.,0.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = ORIENTED_EDGE('',*,*,#207,.T.);+#207 = EDGE_CURVE('',#180,#117,#208,.T.);+#208 = SURFACE_CURVE('',#209,(#213,#220),.PCURVE_S1.);+#209 = LINE('',#210,#211);+#210 = CARTESIAN_POINT('',(3.5,4.5,1.9));+#211 = VECTOR('',#212,1.);+#212 = DIRECTION('',(0.,-1.,0.));+#213 = PCURVE('',#127,#214);+#214 = DEFINITIONAL_REPRESENTATION('',(#215),#219);+#215 = LINE('',#216,#217);+#216 = CARTESIAN_POINT('',(1.75,2.25));+#217 = VECTOR('',#218,1.);+#218 = DIRECTION('',(0.,-1.));+#219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#220 = PCURVE('',#221,#226);+#221 = PLANE('',#222);+#222 = AXIS2_PLACEMENT_3D('',#223,#224,#225);+#223 = CARTESIAN_POINT('',(3.5,0.,0.));+#224 = DIRECTION('',(1.,0.,0.));+#225 = DIRECTION('',(-0.,1.,0.));+#226 = DEFINITIONAL_REPRESENTATION('',(#227),#231);+#227 = LINE('',#228,#229);+#228 = CARTESIAN_POINT('',(4.5,1.9));+#229 = VECTOR('',#230,1.);+#230 = DIRECTION('',(-1.,0.));+#231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#232 = ADVANCED_FACE('',(#233,#308,#422),#139,.T.);+#233 = FACE_BOUND('',#234,.F.);+#234 = EDGE_LOOP('',(#235,#265,#286,#287));+#235 = ORIENTED_EDGE('',*,*,#236,.T.);+#236 = EDGE_CURVE('',#237,#239,#241,.T.);+#237 = VERTEX_POINT('',#238);+#238 = CARTESIAN_POINT('',(3.5,0.,0.));+#239 = VERTEX_POINT('',#240);+#240 = CARTESIAN_POINT('',(0.,0.,0.));+#241 = SURFACE_CURVE('',#242,(#246,#253),.PCURVE_S1.);+#242 = LINE('',#243,#244);+#243 = CARTESIAN_POINT('',(3.5,0.,0.));+#244 = VECTOR('',#245,1.);+#245 = DIRECTION('',(-1.,0.,0.));+#246 = PCURVE('',#139,#247);+#247 = DEFINITIONAL_REPRESENTATION('',(#248),#252);+#248 = LINE('',#249,#250);+#249 = CARTESIAN_POINT('',(3.5,0.));+#250 = VECTOR('',#251,1.);+#251 = DIRECTION('',(-1.,0.));+#252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#253 = PCURVE('',#254,#259);+#254 = PLANE('',#255);+#255 = AXIS2_PLACEMENT_3D('',#256,#257,#258);+#256 = CARTESIAN_POINT('',(1.75,2.25,0.));+#257 = DIRECTION('',(0.,0.,1.));+#258 = DIRECTION('',(1.,0.,-0.));+#259 = DEFINITIONAL_REPRESENTATION('',(#260),#264);+#260 = LINE('',#261,#262);+#261 = CARTESIAN_POINT('',(1.75,-2.25));+#262 = VECTOR('',#263,1.);+#263 = DIRECTION('',(-1.,0.));+#264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#265 = ORIENTED_EDGE('',*,*,#266,.F.);+#266 = EDGE_CURVE('',#119,#239,#267,.T.);+#267 = SURFACE_CURVE('',#268,(#272,#279),.PCURVE_S1.);+#268 = LINE('',#269,#270);+#269 = CARTESIAN_POINT('',(0.,0.,1.9));+#270 = VECTOR('',#271,1.);+#271 = DIRECTION('',(0.,0.,-1.));+#272 = PCURVE('',#139,#273);+#273 = DEFINITIONAL_REPRESENTATION('',(#274),#278);+#274 = LINE('',#275,#276);+#275 = CARTESIAN_POINT('',(0.,1.9));+#276 = VECTOR('',#277,1.);+#277 = DIRECTION('',(0.,-1.));+#278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#279 = PCURVE('',#167,#280);+#280 = DEFINITIONAL_REPRESENTATION('',(#281),#285);+#281 = LINE('',#282,#283);+#282 = CARTESIAN_POINT('',(4.5,1.9));+#283 = VECTOR('',#284,1.);+#284 = DIRECTION('',(0.,-1.));+#285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#286 = ORIENTED_EDGE('',*,*,#116,.F.);+#287 = ORIENTED_EDGE('',*,*,#288,.T.);+#288 = EDGE_CURVE('',#117,#237,#289,.T.);+#289 = SURFACE_CURVE('',#290,(#294,#301),.PCURVE_S1.);+#290 = LINE('',#291,#292);+#291 = CARTESIAN_POINT('',(3.5,0.,1.9));+#292 = VECTOR('',#293,1.);+#293 = DIRECTION('',(0.,0.,-1.));+#294 = PCURVE('',#139,#295);+#295 = DEFINITIONAL_REPRESENTATION('',(#296),#300);+#296 = LINE('',#297,#298);+#297 = CARTESIAN_POINT('',(3.5,1.9));+#298 = VECTOR('',#299,1.);+#299 = DIRECTION('',(0.,-1.));+#300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#301 = PCURVE('',#221,#302);+#302 = DEFINITIONAL_REPRESENTATION('',(#303),#307);+#303 = LINE('',#304,#305);+#304 = CARTESIAN_POINT('',(0.,1.9));+#305 = VECTOR('',#306,1.);+#306 = DIRECTION('',(0.,-1.));+#307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#308 = FACE_BOUND('',#309,.F.);+#309 = EDGE_LOOP('',(#310,#340,#368,#396));+#310 = ORIENTED_EDGE('',*,*,#311,.T.);+#311 = EDGE_CURVE('',#312,#314,#316,.T.);+#312 = VERTEX_POINT('',#313);+#313 = CARTESIAN_POINT('',(1.059462039418,0.,9.314404469578E-02));+#314 = VERTEX_POINT('',#315);+#315 = CARTESIAN_POINT('',(1.259462039404,0.,9.314404469578E-02));+#316 = SURFACE_CURVE('',#317,(#321,#328),.PCURVE_S1.);+#317 = LINE('',#318,#319);+#318 = CARTESIAN_POINT('',(1.059462039418,0.,9.314404469578E-02));+#319 = VECTOR('',#320,1.);+#320 = DIRECTION('',(1.,0.,0.));+#321 = PCURVE('',#139,#322);+#322 = DEFINITIONAL_REPRESENTATION('',(#323),#327);+#323 = LINE('',#324,#325);+#324 = CARTESIAN_POINT('',(1.059462039418,9.314404469578E-02));+#325 = VECTOR('',#326,1.);+#326 = DIRECTION('',(1.,0.));+#327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#328 = PCURVE('',#329,#334);+#329 = PLANE('',#330);+#330 = AXIS2_PLACEMENT_3D('',#331,#332,#333);+#331 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,+ 9.314404469578E-02));+#332 = DIRECTION('',(0.,0.,1.));+#333 = DIRECTION('',(1.,0.,-0.));+#334 = DEFINITIONAL_REPRESENTATION('',(#335),#339);+#335 = LINE('',#336,#337);+#336 = CARTESIAN_POINT('',(0.371698813406,-1.251276520802));+#337 = VECTOR('',#338,1.);+#338 = DIRECTION('',(1.,0.));+#339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#340 = ORIENTED_EDGE('',*,*,#341,.T.);+#341 = EDGE_CURVE('',#314,#342,#344,.T.);+#342 = VERTEX_POINT('',#343);+#343 = CARTESIAN_POINT('',(1.259462039404,0.,0.193144044696));+#344 = SURFACE_CURVE('',#345,(#349,#356),.PCURVE_S1.);+#345 = LINE('',#346,#347);+#346 = CARTESIAN_POINT('',(1.259462039404,0.,9.314404469578E-02));+#347 = VECTOR('',#348,1.);+#348 = DIRECTION('',(0.,0.,1.));+#349 = PCURVE('',#139,#350);+#350 = DEFINITIONAL_REPRESENTATION('',(#351),#355);+#351 = LINE('',#352,#353);+#352 = CARTESIAN_POINT('',(1.259462039404,9.314404469578E-02));+#353 = VECTOR('',#354,1.);+#354 = DIRECTION('',(0.,1.));+#355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#356 = PCURVE('',#357,#362);+#357 = PLANE('',#358);+#358 = AXIS2_PLACEMENT_3D('',#359,#360,#361);+#359 = CARTESIAN_POINT('',(1.259462039404,-1.4307338502E-02,+ 9.314404469578E-02));+#360 = DIRECTION('',(1.,0.,0.));+#361 = DIRECTION('',(-0.,1.,0.));+#362 = DEFINITIONAL_REPRESENTATION('',(#363),#367);+#363 = LINE('',#364,#365);+#364 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#365 = VECTOR('',#366,1.);+#366 = DIRECTION('',(0.,1.));+#367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#368 = ORIENTED_EDGE('',*,*,#369,.F.);+#369 = EDGE_CURVE('',#370,#342,#372,.T.);+#370 = VERTEX_POINT('',#371);+#371 = CARTESIAN_POINT('',(1.059462039418,0.,0.193144044696));+#372 = SURFACE_CURVE('',#373,(#377,#384),.PCURVE_S1.);+#373 = LINE('',#374,#375);+#374 = CARTESIAN_POINT('',(1.059462039418,0.,0.193144044696));+#375 = VECTOR('',#376,1.);+#376 = DIRECTION('',(1.,0.,0.));+#377 = PCURVE('',#139,#378);+#378 = DEFINITIONAL_REPRESENTATION('',(#379),#383);+#379 = LINE('',#380,#381);+#380 = CARTESIAN_POINT('',(1.059462039418,0.193144044696));+#381 = VECTOR('',#382,1.);+#382 = DIRECTION('',(1.,0.));+#383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#384 = PCURVE('',#385,#390);+#385 = PLANE('',#386);+#386 = AXIS2_PLACEMENT_3D('',#387,#388,#389);+#387 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696)+ );+#388 = DIRECTION('',(0.,0.,1.));+#389 = DIRECTION('',(1.,0.,-0.));+#390 = DEFINITIONAL_REPRESENTATION('',(#391),#395);+#391 = LINE('',#392,#393);+#392 = CARTESIAN_POINT('',(0.371698813406,-1.251276520802));+#393 = VECTOR('',#394,1.);+#394 = DIRECTION('',(1.,0.));+#395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#396 = ORIENTED_EDGE('',*,*,#397,.F.);+#397 = EDGE_CURVE('',#312,#370,#398,.T.);+#398 = SURFACE_CURVE('',#399,(#403,#410),.PCURVE_S1.);+#399 = LINE('',#400,#401);+#400 = CARTESIAN_POINT('',(1.059462039418,0.,9.314404469578E-02));+#401 = VECTOR('',#402,1.);+#402 = DIRECTION('',(0.,0.,1.));+#403 = PCURVE('',#139,#404);+#404 = DEFINITIONAL_REPRESENTATION('',(#405),#409);+#405 = LINE('',#406,#407);+#406 = CARTESIAN_POINT('',(1.059462039418,9.314404469578E-02));+#407 = VECTOR('',#408,1.);+#408 = DIRECTION('',(0.,1.));+#409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#410 = PCURVE('',#411,#416);+#411 = PLANE('',#412);+#412 = AXIS2_PLACEMENT_3D('',#413,#414,#415);+#413 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+ 9.314404469578E-02));+#414 = DIRECTION('',(-1.,0.,0.));+#415 = DIRECTION('',(0.,-1.,0.));+#416 = DEFINITIONAL_REPRESENTATION('',(#417),#421);+#417 = LINE('',#418,#419);+#418 = CARTESIAN_POINT('',(1.06926615031E-02,0.));+#419 = VECTOR('',#420,1.);+#420 = DIRECTION('',(0.,1.));+#421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#422 = FACE_BOUND('',#423,.F.);+#423 = EDGE_LOOP('',(#424,#454,#482,#510));+#424 = ORIENTED_EDGE('',*,*,#425,.T.);+#425 = EDGE_CURVE('',#426,#428,#430,.T.);+#426 = VERTEX_POINT('',#427);+#427 = CARTESIAN_POINT('',(2.439462039408,0.,0.193144044696));+#428 = VERTEX_POINT('',#429);+#429 = CARTESIAN_POINT('',(2.239462039422,0.,0.193144044696));+#430 = SURFACE_CURVE('',#431,(#435,#442),.PCURVE_S1.);+#431 = LINE('',#432,#433);+#432 = CARTESIAN_POINT('',(2.439462039408,0.,0.193144044696));+#433 = VECTOR('',#434,1.);+#434 = DIRECTION('',(-1.,0.,0.));+#435 = PCURVE('',#139,#436);+#436 = DEFINITIONAL_REPRESENTATION('',(#437),#441);+#437 = LINE('',#438,#439);+#438 = CARTESIAN_POINT('',(2.439462039408,0.193144044696));+#439 = VECTOR('',#440,1.);+#440 = DIRECTION('',(-1.,0.));+#441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#442 = PCURVE('',#443,#448);+#443 = PLANE('',#444);+#444 = AXIS2_PLACEMENT_3D('',#445,#446,#447);+#445 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696)+ );+#446 = DIRECTION('',(0.,0.,1.));+#447 = DIRECTION('',(1.,0.,-0.));+#448 = DEFINITIONAL_REPRESENTATION('',(#449),#453);+#449 = LINE('',#450,#451);+#450 = CARTESIAN_POINT('',(-0.349634015048,-1.727467110448));+#451 = VECTOR('',#452,1.);+#452 = DIRECTION('',(-1.,0.));+#453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#454 = ORIENTED_EDGE('',*,*,#455,.F.);+#455 = EDGE_CURVE('',#456,#428,#458,.T.);+#456 = VERTEX_POINT('',#457);+#457 = CARTESIAN_POINT('',(2.239462039422,0.,9.314404469578E-02));+#458 = SURFACE_CURVE('',#459,(#463,#470),.PCURVE_S1.);+#459 = LINE('',#460,#461);+#460 = CARTESIAN_POINT('',(2.239462039422,0.,9.314404469578E-02));+#461 = VECTOR('',#462,1.);+#462 = DIRECTION('',(0.,0.,1.));+#463 = PCURVE('',#139,#464);+#464 = DEFINITIONAL_REPRESENTATION('',(#465),#469);+#465 = LINE('',#466,#467);+#466 = CARTESIAN_POINT('',(2.239462039422,9.314404469578E-02));+#467 = VECTOR('',#468,1.);+#468 = DIRECTION('',(0.,1.));+#469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#470 = PCURVE('',#471,#476);+#471 = PLANE('',#472);+#472 = AXIS2_PLACEMENT_3D('',#473,#474,#475);+#473 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+ 9.314404469578E-02));+#474 = DIRECTION('',(-1.,0.,0.));+#475 = DIRECTION('',(0.,-1.,0.));+#476 = DEFINITIONAL_REPRESENTATION('',(#477),#481);+#477 = LINE('',#478,#479);+#478 = CARTESIAN_POINT('',(2.032407414415E-03,0.));+#479 = VECTOR('',#480,1.);+#480 = DIRECTION('',(0.,1.));+#481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#482 = ORIENTED_EDGE('',*,*,#483,.T.);+#483 = EDGE_CURVE('',#456,#484,#486,.T.);+#484 = VERTEX_POINT('',#485);+#485 = CARTESIAN_POINT('',(2.439462039408,0.,9.314404469578E-02));+#486 = SURFACE_CURVE('',#487,(#491,#498),.PCURVE_S1.);+#487 = LINE('',#488,#489);+#488 = CARTESIAN_POINT('',(2.239462039422,0.,9.314404469578E-02));+#489 = VECTOR('',#490,1.);+#490 = DIRECTION('',(1.,0.,0.));+#491 = PCURVE('',#139,#492);+#492 = DEFINITIONAL_REPRESENTATION('',(#493),#497);+#493 = LINE('',#494,#495);+#494 = CARTESIAN_POINT('',(2.239462039422,9.314404469578E-02));+#495 = VECTOR('',#496,1.);+#496 = DIRECTION('',(1.,0.));+#497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#498 = PCURVE('',#499,#504);+#499 = PLANE('',#500);+#500 = AXIS2_PLACEMENT_3D('',#501,#502,#503);+#501 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,+ 9.314404469578E-02));+#502 = DIRECTION('',(0.,0.,1.));+#503 = DIRECTION('',(1.,0.,-0.));+#504 = DEFINITIONAL_REPRESENTATION('',(#505),#509);+#505 = LINE('',#506,#507);+#506 = CARTESIAN_POINT('',(-0.549634015034,-1.727467110448));+#507 = VECTOR('',#508,1.);+#508 = DIRECTION('',(1.,0.));+#509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#510 = ORIENTED_EDGE('',*,*,#511,.T.);+#511 = EDGE_CURVE('',#484,#426,#512,.T.);+#512 = SURFACE_CURVE('',#513,(#517,#524),.PCURVE_S1.);+#513 = LINE('',#514,#515);+#514 = CARTESIAN_POINT('',(2.439462039408,0.,9.314404469578E-02));+#515 = VECTOR('',#516,1.);+#516 = DIRECTION('',(0.,0.,1.));+#517 = PCURVE('',#139,#518);+#518 = DEFINITIONAL_REPRESENTATION('',(#519),#523);+#519 = LINE('',#520,#521);+#520 = CARTESIAN_POINT('',(2.439462039408,9.314404469578E-02));+#521 = VECTOR('',#522,1.);+#522 = DIRECTION('',(0.,1.));+#523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#524 = PCURVE('',#525,#530);+#525 = PLANE('',#526);+#526 = AXIS2_PLACEMENT_3D('',#527,#528,#529);+#527 = CARTESIAN_POINT('',(2.439462039408,-1.4307338502E-02,+ 9.314404469578E-02));+#528 = DIRECTION('',(1.,0.,0.));+#529 = DIRECTION('',(-0.,1.,0.));+#530 = DEFINITIONAL_REPRESENTATION('',(#531),#535);+#531 = LINE('',#532,#533);+#532 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#533 = VECTOR('',#534,1.);+#534 = DIRECTION('',(0.,1.));+#535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#536 = ADVANCED_FACE('',(#537),#551,.F.);+#537 = FACE_BOUND('',#538,.F.);+#538 = EDGE_LOOP('',(#539,#574,#597,#625,#653,#681));+#539 = ORIENTED_EDGE('',*,*,#540,.T.);+#540 = EDGE_CURVE('',#541,#543,#545,.T.);+#541 = VERTEX_POINT('',#542);+#542 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,0.));+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(0.,1.845441613228,0.));+#545 = SURFACE_CURVE('',#546,(#550,#562),.PCURVE_S1.);+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,0.));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#550 = PCURVE('',#551,#556);+#551 = PLANE('',#552);+#552 = AXIS2_PLACEMENT_3D('',#553,#554,#555);+#553 = CARTESIAN_POINT('',(1.75,2.25,0.));+#554 = DIRECTION('',(0.,0.,1.));+#555 = DIRECTION('',(1.,0.,-0.));+#556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);+#557 = LINE('',#558,#559);+#558 = CARTESIAN_POINT('',(-1.675537960579,-0.439307338503));+#559 = VECTOR('',#560,1.);+#560 = DIRECTION('',(-0.90618313999,0.422885465342));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#562 = PCURVE('',#563,#568);+#563 = PLANE('',#564);+#564 = AXIS2_PLACEMENT_3D('',#565,#566,#567);+#565 = CARTESIAN_POINT('',(7.446203941749E-02,1.810692661499,+ 9.314404469578E-02));+#566 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#567 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#568 = DEFINITIONAL_REPRESENTATION('',(#569),#573);+#569 = LINE('',#570,#571);+#570 = CARTESIAN_POINT('',(-4.162359949872E-12,9.314404469578E-02));+#571 = VECTOR('',#572,1.);+#572 = DIRECTION('',(1.,0.));+#573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#574 = ORIENTED_EDGE('',*,*,#575,.F.);+#575 = EDGE_CURVE('',#576,#543,#578,.T.);+#576 = VERTEX_POINT('',#577);+#577 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#578 = SURFACE_CURVE('',#579,(#583,#590),.PCURVE_S1.);+#579 = LINE('',#580,#581);+#580 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#581 = VECTOR('',#582,1.);+#582 = DIRECTION('',(0.,1.,0.));+#583 = PCURVE('',#551,#584);+#584 = DEFINITIONAL_REPRESENTATION('',(#585),#589);+#585 = LINE('',#586,#587);+#586 = CARTESIAN_POINT('',(-1.75,-0.724056290231));+#587 = VECTOR('',#588,1.);+#588 = DIRECTION('',(0.,1.));+#589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#590 = PCURVE('',#167,#591);+#591 = DEFINITIONAL_REPRESENTATION('',(#592),#596);+#592 = LINE('',#593,#594);+#593 = CARTESIAN_POINT('',(2.974056290231,0.));+#594 = VECTOR('',#595,1.);+#595 = DIRECTION('',(-1.,0.));+#596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#597 = ORIENTED_EDGE('',*,*,#598,.T.);+#598 = EDGE_CURVE('',#576,#599,#601,.T.);+#599 = VERTEX_POINT('',#600);+#600 = CARTESIAN_POINT('',(7.446203942237E-02,1.560692661501,0.));+#601 = SURFACE_CURVE('',#602,(#606,#613),.PCURVE_S1.);+#602 = LINE('',#603,#604);+#603 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#604 = VECTOR('',#605,1.);+#605 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#606 = PCURVE('',#551,#607);+#607 = DEFINITIONAL_REPRESENTATION('',(#608),#612);+#608 = LINE('',#609,#610);+#609 = CARTESIAN_POINT('',(-1.75,-0.724056290231));+#610 = VECTOR('',#611,1.);+#611 = DIRECTION('',(0.90618313999,0.422885465342));+#612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#613 = PCURVE('',#614,#619);+#614 = PLANE('',#615);+#615 = AXIS2_PLACEMENT_3D('',#616,#617,#618);+#616 = CARTESIAN_POINT('',(-5.379605796046E-04,1.525692661499,+ 9.314404469578E-02));+#617 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#618 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#619 = DEFINITIONAL_REPRESENTATION('',(#620),#624);+#620 = LINE('',#621,#622);+#621 = CARTESIAN_POINT('',(5.936554716993E-04,9.314404469578E-02));+#622 = VECTOR('',#623,1.);+#623 = DIRECTION('',(1.,0.));+#624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#625 = ORIENTED_EDGE('',*,*,#626,.F.);+#626 = EDGE_CURVE('',#627,#599,#629,.T.);+#627 = VERTEX_POINT('',#628);+#628 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#629 = SURFACE_CURVE('',#630,(#634,#641),.PCURVE_S1.);+#630 = LINE('',#631,#632);+#631 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#632 = VECTOR('',#633,1.);+#633 = DIRECTION('',(-1.,0.,0.));+#634 = PCURVE('',#551,#635);+#635 = DEFINITIONAL_REPRESENTATION('',(#636),#640);+#636 = LINE('',#637,#638);+#637 = CARTESIAN_POINT('',(-1.550537960575,-0.689307338499));+#638 = VECTOR('',#639,1.);+#639 = DIRECTION('',(-1.,0.));+#640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#641 = PCURVE('',#642,#647);+#642 = PLANE('',#643);+#643 = AXIS2_PLACEMENT_3D('',#644,#645,#646);+#644 = CARTESIAN_POINT('',(0.149462046017,1.560692661501,+ 9.314404469578E-02));+#645 = DIRECTION('',(0.,1.,0.));+#646 = DIRECTION('',(-1.,0.,0.));+#647 = DEFINITIONAL_REPRESENTATION('',(#648),#652);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(1.,0.));+#652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#653 = ORIENTED_EDGE('',*,*,#654,.T.);+#654 = EDGE_CURVE('',#627,#655,#657,.T.);+#655 = VERTEX_POINT('',#656);+#656 = CARTESIAN_POINT('',(0.199462039425,1.810692661497,0.));+#657 = SURFACE_CURVE('',#658,(#662,#669),.PCURVE_S1.);+#658 = LINE('',#659,#660);+#659 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#660 = VECTOR('',#661,1.);+#661 = DIRECTION('',(0.,1.,0.));+#662 = PCURVE('',#551,#663);+#663 = DEFINITIONAL_REPRESENTATION('',(#664),#668);+#664 = LINE('',#665,#666);+#665 = CARTESIAN_POINT('',(-1.550537960575,-0.689307338499));+#666 = VECTOR('',#667,1.);+#667 = DIRECTION('',(0.,1.));+#668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#669 = PCURVE('',#670,#675);+#670 = PLANE('',#671);+#671 = AXIS2_PLACEMENT_3D('',#672,#673,#674);+#672 = CARTESIAN_POINT('',(0.199462039425,1.560692661498,+ 9.314404469578E-02));+#673 = DIRECTION('',(-1.,0.,0.));+#674 = DIRECTION('',(0.,1.,0.));+#675 = DEFINITIONAL_REPRESENTATION('',(#676),#680);+#676 = LINE('',#677,#678);+#677 = CARTESIAN_POINT('',(3.000044657142E-12,9.314404469578E-02));+#678 = VECTOR('',#679,1.);+#679 = DIRECTION('',(1.,0.));+#680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#681 = ORIENTED_EDGE('',*,*,#682,.F.);+#682 = EDGE_CURVE('',#541,#655,#683,.T.);+#683 = SURFACE_CURVE('',#684,(#688,#695),.PCURVE_S1.);+#684 = LINE('',#685,#686);+#685 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,0.));+#686 = VECTOR('',#687,1.);+#687 = DIRECTION('',(1.,0.,0.));+#688 = PCURVE('',#551,#689);+#689 = DEFINITIONAL_REPRESENTATION('',(#690),#694);+#690 = LINE('',#691,#692);+#691 = CARTESIAN_POINT('',(-1.675537960579,-0.439307338503));+#692 = VECTOR('',#693,1.);+#693 = DIRECTION('',(1.,0.));+#694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#695 = PCURVE('',#696,#701);+#696 = PLANE('',#697);+#697 = AXIS2_PLACEMENT_3D('',#698,#699,#700);+#698 = CARTESIAN_POINT('',(7.446204602042E-02,1.810692661497,+ 9.314404469578E-02));+#699 = DIRECTION('',(0.,-1.,0.));+#700 = DIRECTION('',(1.,0.,0.));+#701 = DEFINITIONAL_REPRESENTATION('',(#702),#706);+#702 = LINE('',#703,#704);+#703 = CARTESIAN_POINT('',(-6.599270005458E-09,-9.314404469578E-02));+#704 = VECTOR('',#705,1.);+#705 = DIRECTION('',(1.,0.));+#706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#707 = ADVANCED_FACE('',(#708),#722,.F.);+#708 = FACE_BOUND('',#709,.F.);+#709 = EDGE_LOOP('',(#710,#745,#768,#796,#824,#852));+#710 = ORIENTED_EDGE('',*,*,#711,.T.);+#711 = EDGE_CURVE('',#712,#714,#716,.T.);+#712 = VERTEX_POINT('',#713);+#713 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,0.));+#714 = VERTEX_POINT('',#715);+#715 = CARTESIAN_POINT('',(0.,1.345441613228,0.));+#716 = SURFACE_CURVE('',#717,(#721,#733),.PCURVE_S1.);+#717 = LINE('',#718,#719);+#718 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,0.));+#719 = VECTOR('',#720,1.);+#720 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#721 = PCURVE('',#722,#727);+#722 = PLANE('',#723);+#723 = AXIS2_PLACEMENT_3D('',#724,#725,#726);+#724 = CARTESIAN_POINT('',(1.75,2.25,0.));+#725 = DIRECTION('',(0.,0.,1.));+#726 = DIRECTION('',(1.,0.,-0.));+#727 = DEFINITIONAL_REPRESENTATION('',(#728),#732);+#728 = LINE('',#729,#730);+#729 = CARTESIAN_POINT('',(-1.675537960575,-0.939307338505));+#730 = VECTOR('',#731,1.);+#731 = DIRECTION('',(-0.906183139987,0.422885465348));+#732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#733 = PCURVE('',#734,#739);+#734 = PLANE('',#735);+#735 = AXIS2_PLACEMENT_3D('',#736,#737,#738);+#736 = CARTESIAN_POINT('',(7.446203941748E-02,1.310692661499,+ 9.314404469578E-02));+#737 = DIRECTION('',(-0.422885465348,-0.906183139987,0.));+#738 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#739 = DEFINITIONAL_REPRESENTATION('',(#740),#744);+#740 = LINE('',#741,#742);+#741 = CARTESIAN_POINT('',(-8.31567872547E-12,9.314404469578E-02));+#742 = VECTOR('',#743,1.);+#743 = DIRECTION('',(1.,0.));+#744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#745 = ORIENTED_EDGE('',*,*,#746,.F.);+#746 = EDGE_CURVE('',#747,#714,#749,.T.);+#747 = VERTEX_POINT('',#748);+#748 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#749 = SURFACE_CURVE('',#750,(#754,#761),.PCURVE_S1.);+#750 = LINE('',#751,#752);+#751 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#752 = VECTOR('',#753,1.);+#753 = DIRECTION('',(0.,1.,0.));+#754 = PCURVE('',#722,#755);+#755 = DEFINITIONAL_REPRESENTATION('',(#756),#760);+#756 = LINE('',#757,#758);+#757 = CARTESIAN_POINT('',(-1.75,-1.224056290231));+#758 = VECTOR('',#759,1.);+#759 = DIRECTION('',(0.,1.));+#760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#761 = PCURVE('',#167,#762);+#762 = DEFINITIONAL_REPRESENTATION('',(#763),#767);+#763 = LINE('',#764,#765);+#764 = CARTESIAN_POINT('',(3.474056290231,0.));+#765 = VECTOR('',#766,1.);+#766 = DIRECTION('',(-1.,0.));+#767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#768 = ORIENTED_EDGE('',*,*,#769,.T.);+#769 = EDGE_CURVE('',#747,#770,#772,.T.);+#770 = VERTEX_POINT('',#771);+#771 = CARTESIAN_POINT('',(7.446203941748E-02,1.060692661499,0.));+#772 = SURFACE_CURVE('',#773,(#777,#784),.PCURVE_S1.);+#773 = LINE('',#774,#775);+#774 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#775 = VECTOR('',#776,1.);+#776 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#777 = PCURVE('',#722,#778);+#778 = DEFINITIONAL_REPRESENTATION('',(#779),#783);+#779 = LINE('',#780,#781);+#780 = CARTESIAN_POINT('',(-1.75,-1.224056290231));+#781 = VECTOR('',#782,1.);+#782 = DIRECTION('',(0.906183139987,0.422885465348));+#783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#784 = PCURVE('',#785,#790);+#785 = PLANE('',#786);+#786 = AXIS2_PLACEMENT_3D('',#787,#788,#789);+#787 = CARTESIAN_POINT('',(-5.379605796054E-04,1.025692661498,+ 9.314404469578E-02));+#788 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#789 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#790 = DEFINITIONAL_REPRESENTATION('',(#791),#795);+#791 = LINE('',#792,#793);+#792 = CARTESIAN_POINT('',(5.936554721229E-04,9.314404469578E-02));+#793 = VECTOR('',#794,1.);+#794 = DIRECTION('',(1.,0.));+#795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#796 = ORIENTED_EDGE('',*,*,#797,.F.);+#797 = EDGE_CURVE('',#798,#770,#800,.T.);+#798 = VERTEX_POINT('',#799);+#799 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#800 = SURFACE_CURVE('',#801,(#805,#812),.PCURVE_S1.);+#801 = LINE('',#802,#803);+#802 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#803 = VECTOR('',#804,1.);+#804 = DIRECTION('',(-1.,0.,0.));+#805 = PCURVE('',#722,#806);+#806 = DEFINITIONAL_REPRESENTATION('',(#807),#811);+#807 = LINE('',#808,#809);+#808 = CARTESIAN_POINT('',(-1.550537960575,-1.189307338501));+#809 = VECTOR('',#810,1.);+#810 = DIRECTION('',(-1.,0.));+#811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#812 = PCURVE('',#813,#818);+#813 = PLANE('',#814);+#814 = AXIS2_PLACEMENT_3D('',#815,#816,#817);+#815 = CARTESIAN_POINT('',(0.149462046017,1.060692661499,+ 9.314404469578E-02));+#816 = DIRECTION('',(0.,1.,0.));+#817 = DIRECTION('',(-1.,0.,0.));+#818 = DEFINITIONAL_REPRESENTATION('',(#819),#823);+#819 = LINE('',#820,#821);+#820 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#821 = VECTOR('',#822,1.);+#822 = DIRECTION('',(1.,0.));+#823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#824 = ORIENTED_EDGE('',*,*,#825,.T.);+#825 = EDGE_CURVE('',#798,#826,#828,.T.);+#826 = VERTEX_POINT('',#827);+#827 = CARTESIAN_POINT('',(0.199462039425,1.310692661495,0.));+#828 = SURFACE_CURVE('',#829,(#833,#840),.PCURVE_S1.);+#829 = LINE('',#830,#831);+#830 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#831 = VECTOR('',#832,1.);+#832 = DIRECTION('',(0.,1.,0.));+#833 = PCURVE('',#722,#834);+#834 = DEFINITIONAL_REPRESENTATION('',(#835),#839);+#835 = LINE('',#836,#837);+#836 = CARTESIAN_POINT('',(-1.550537960575,-1.189307338501));+#837 = VECTOR('',#838,1.);+#838 = DIRECTION('',(0.,1.));+#839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#840 = PCURVE('',#841,#846);+#841 = PLANE('',#842);+#842 = AXIS2_PLACEMENT_3D('',#843,#844,#845);+#843 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+ 9.314404469578E-02));+#844 = DIRECTION('',(-1.,0.,0.));+#845 = DIRECTION('',(0.,1.,0.));+#846 = DEFINITIONAL_REPRESENTATION('',(#847),#851);+#847 = LINE('',#848,#849);+#848 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#849 = VECTOR('',#850,1.);+#850 = DIRECTION('',(1.,0.));+#851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#852 = ORIENTED_EDGE('',*,*,#853,.F.);+#853 = EDGE_CURVE('',#712,#826,#854,.T.);+#854 = SURFACE_CURVE('',#855,(#859,#866),.PCURVE_S1.);+#855 = LINE('',#856,#857);+#856 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,0.));+#857 = VECTOR('',#858,1.);+#858 = DIRECTION('',(1.,0.,0.));+#859 = PCURVE('',#722,#860);+#860 = DEFINITIONAL_REPRESENTATION('',(#861),#865);+#861 = LINE('',#862,#863);+#862 = CARTESIAN_POINT('',(-1.675537960575,-0.939307338505));+#863 = VECTOR('',#864,1.);+#864 = DIRECTION('',(1.,0.));+#865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#866 = PCURVE('',#867,#872);+#867 = PLANE('',#868);+#868 = AXIS2_PLACEMENT_3D('',#869,#870,#871);+#869 = CARTESIAN_POINT('',(7.446204602042E-02,1.310692661495,+ 9.314404469578E-02));+#870 = DIRECTION('',(0.,-1.,0.));+#871 = DIRECTION('',(1.,0.,0.));+#872 = DEFINITIONAL_REPRESENTATION('',(#873),#877);+#873 = LINE('',#874,#875);+#874 = CARTESIAN_POINT('',(-6.595630000494E-09,-9.314404469578E-02));+#875 = VECTOR('',#876,1.);+#876 = DIRECTION('',(1.,0.));+#877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#878 = ADVANCED_FACE('',(#879),#893,.F.);+#879 = FACE_BOUND('',#880,.F.);+#880 = EDGE_LOOP('',(#881,#916,#944,#972,#995,#1023));+#881 = ORIENTED_EDGE('',*,*,#882,.T.);+#882 = EDGE_CURVE('',#883,#885,#887,.T.);+#883 = VERTEX_POINT('',#884);+#884 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#885 = VERTEX_POINT('',#886);+#886 = CARTESIAN_POINT('',(0.199462039425,0.810692661502,0.));+#887 = SURFACE_CURVE('',#888,(#892,#904),.PCURVE_S1.);+#888 = LINE('',#889,#890);+#889 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#890 = VECTOR('',#891,1.);+#891 = DIRECTION('',(0.,1.,0.));+#892 = PCURVE('',#893,#898);+#893 = PLANE('',#894);+#894 = AXIS2_PLACEMENT_3D('',#895,#896,#897);+#895 = CARTESIAN_POINT('',(1.75,2.25,0.));+#896 = DIRECTION('',(0.,0.,1.));+#897 = DIRECTION('',(1.,0.,-0.));+#898 = DEFINITIONAL_REPRESENTATION('',(#899),#903);+#899 = LINE('',#900,#901);+#900 = CARTESIAN_POINT('',(-1.550537960575,-1.689307338503));+#901 = VECTOR('',#902,1.);+#902 = DIRECTION('',(0.,1.));+#903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#904 = PCURVE('',#905,#910);+#905 = PLANE('',#906);+#906 = AXIS2_PLACEMENT_3D('',#907,#908,#909);+#907 = CARTESIAN_POINT('',(0.199462039425,0.560692661499,+ 9.314404469578E-02));+#908 = DIRECTION('',(-1.,0.,0.));+#909 = DIRECTION('',(0.,1.,0.));+#910 = DEFINITIONAL_REPRESENTATION('',(#911),#915);+#911 = LINE('',#912,#913);+#912 = CARTESIAN_POINT('',(-1.99995575656E-12,9.314404469578E-02));+#913 = VECTOR('',#914,1.);+#914 = DIRECTION('',(1.,0.));+#915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#916 = ORIENTED_EDGE('',*,*,#917,.F.);+#917 = EDGE_CURVE('',#918,#885,#920,.T.);+#918 = VERTEX_POINT('',#919);+#919 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,0.));+#920 = SURFACE_CURVE('',#921,(#925,#932),.PCURVE_S1.);+#921 = LINE('',#922,#923);+#922 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,0.));+#923 = VECTOR('',#924,1.);+#924 = DIRECTION('',(1.,0.,0.));+#925 = PCURVE('',#893,#926);+#926 = DEFINITIONAL_REPRESENTATION('',(#927),#931);+#927 = LINE('',#928,#929);+#928 = CARTESIAN_POINT('',(-1.67553795398,-1.439307338498));+#929 = VECTOR('',#930,1.);+#930 = DIRECTION('',(1.,0.));+#931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#932 = PCURVE('',#933,#938);+#933 = PLANE('',#934);+#934 = AXIS2_PLACEMENT_3D('',#935,#936,#937);+#935 = CARTESIAN_POINT('',(7.446204602042E-02,0.810692661502,+ 9.314404469578E-02));+#936 = DIRECTION('',(0.,-1.,0.));+#937 = DIRECTION('',(1.,0.,0.));+#938 = DEFINITIONAL_REPRESENTATION('',(#939),#943);+#939 = LINE('',#940,#941);+#940 = CARTESIAN_POINT('',(-1.000588500943E-14,-9.314404469578E-02));+#941 = VECTOR('',#942,1.);+#942 = DIRECTION('',(1.,0.));+#943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#944 = ORIENTED_EDGE('',*,*,#945,.F.);+#945 = EDGE_CURVE('',#946,#918,#948,.T.);+#946 = VERTEX_POINT('',#947);+#947 = CARTESIAN_POINT('',(0.,0.84544161632,0.));+#948 = SURFACE_CURVE('',#949,(#953,#960),.PCURVE_S1.);+#949 = LINE('',#950,#951);+#950 = CARTESIAN_POINT('',(0.,0.84544161632,0.));+#951 = VECTOR('',#952,1.);+#952 = DIRECTION('',(0.906183139959,-0.422885465409,0.));+#953 = PCURVE('',#893,#954);+#954 = DEFINITIONAL_REPRESENTATION('',(#955),#959);+#955 = LINE('',#956,#957);+#956 = CARTESIAN_POINT('',(-1.75,-1.40455838368));+#957 = VECTOR('',#958,1.);+#958 = DIRECTION('',(0.906183139959,-0.422885465409));+#959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#960 = PCURVE('',#961,#966);+#961 = PLANE('',#962);+#962 = AXIS2_PLACEMENT_3D('',#963,#964,#965);+#963 = CARTESIAN_POINT('',(-5.379539584846E-04,0.8456926615,+ 9.314404469578E-02));+#964 = DIRECTION('',(-0.422885465409,-0.906183139959,0.));+#965 = DIRECTION('',(0.906183139959,-0.422885465409,0.));+#966 = DEFINITIONAL_REPRESENTATION('',(#967),#971);+#967 = LINE('',#968,#969);+#968 = CARTESIAN_POINT('',(5.936481650359E-04,-9.314404469578E-02));+#969 = VECTOR('',#970,1.);+#970 = DIRECTION('',(1.,0.));+#971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#972 = ORIENTED_EDGE('',*,*,#973,.F.);+#973 = EDGE_CURVE('',#974,#946,#976,.T.);+#974 = VERTEX_POINT('',#975);+#975 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#976 = SURFACE_CURVE('',#977,(#981,#988),.PCURVE_S1.);+#977 = LINE('',#978,#979);+#978 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#979 = VECTOR('',#980,1.);+#980 = DIRECTION('',(0.,1.,0.));+#981 = PCURVE('',#893,#982);+#982 = DEFINITIONAL_REPRESENTATION('',(#983),#987);+#983 = LINE('',#984,#985);+#984 = CARTESIAN_POINT('',(-1.75,-1.724056290231));+#985 = VECTOR('',#986,1.);+#986 = DIRECTION('',(0.,1.));+#987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#988 = PCURVE('',#167,#989);+#989 = DEFINITIONAL_REPRESENTATION('',(#990),#994);+#990 = LINE('',#991,#992);+#991 = CARTESIAN_POINT('',(3.974056290231,0.));+#992 = VECTOR('',#993,1.);+#993 = DIRECTION('',(-1.,0.));+#994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#995 = ORIENTED_EDGE('',*,*,#996,.T.);+#996 = EDGE_CURVE('',#974,#997,#999,.T.);+#997 = VERTEX_POINT('',#998);+#998 = CARTESIAN_POINT('',(7.446203941383E-02,0.560692661497,0.));+#999 = SURFACE_CURVE('',#1000,(#1004,#1011),.PCURVE_S1.);+#1000 = LINE('',#1001,#1002);+#1001 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#1002 = VECTOR('',#1003,1.);+#1003 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#1004 = PCURVE('',#893,#1005);+#1005 = DEFINITIONAL_REPRESENTATION('',(#1006),#1010);+#1006 = LINE('',#1007,#1008);+#1007 = CARTESIAN_POINT('',(-1.75,-1.724056290231));+#1008 = VECTOR('',#1009,1.);+#1009 = DIRECTION('',(0.906183139987,0.422885465348));+#1010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1011 = PCURVE('',#1012,#1017);+#1012 = PLANE('',#1013);+#1013 = AXIS2_PLACEMENT_3D('',#1014,#1015,#1016);+#1014 = CARTESIAN_POINT('',(-5.379605796061E-04,0.525692661498,+ 9.314404469578E-02));+#1015 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#1016 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#1017 = DEFINITIONAL_REPRESENTATION('',(#1018),#1022);+#1018 = LINE('',#1019,#1020);+#1019 = CARTESIAN_POINT('',(5.936554721235E-04,9.314404469578E-02));+#1020 = VECTOR('',#1021,1.);+#1021 = DIRECTION('',(1.,0.));+#1022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1023 = ORIENTED_EDGE('',*,*,#1024,.F.);+#1024 = EDGE_CURVE('',#883,#997,#1025,.T.);+#1025 = SURFACE_CURVE('',#1026,(#1030,#1037),.PCURVE_S1.);+#1026 = LINE('',#1027,#1028);+#1027 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#1028 = VECTOR('',#1029,1.);+#1029 = DIRECTION('',(-1.,0.,0.));+#1030 = PCURVE('',#893,#1031);+#1031 = DEFINITIONAL_REPRESENTATION('',(#1032),#1036);+#1032 = LINE('',#1033,#1034);+#1033 = CARTESIAN_POINT('',(-1.550537960575,-1.689307338503));+#1034 = VECTOR('',#1035,1.);+#1035 = DIRECTION('',(-1.,0.));+#1036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1037 = PCURVE('',#1038,#1043);+#1038 = PLANE('',#1039);+#1039 = AXIS2_PLACEMENT_3D('',#1040,#1041,#1042);+#1040 = CARTESIAN_POINT('',(0.149462046017,0.560692661497,+ 9.314404469578E-02));+#1041 = DIRECTION('',(0.,1.,0.));+#1042 = DIRECTION('',(-1.,0.,0.));+#1043 = DEFINITIONAL_REPRESENTATION('',(#1044),#1048);+#1044 = LINE('',#1045,#1046);+#1045 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#1046 = VECTOR('',#1047,1.);+#1047 = DIRECTION('',(1.,0.));+#1048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1049 = ADVANCED_FACE('',(#1050),#254,.F.);+#1050 = FACE_BOUND('',#1051,.F.);+#1051 = EDGE_LOOP('',(#1052,#1087,#1115,#1143,#1166,#1194,#1222,#1255,+ #1283,#1311,#1334,#1362,#1390,#1423,#1451,#1484,#1512,#1540,#1568,+ #1596,#1619,#1642,#1670,#1698,#1726,#1759,#1787,#1815,#1843,#1866,+ #1894,#1922,#1950,#1983,#2011,#2039,#2067,#2090,#2118,#2146,#2174,+ #2207,#2235,#2263,#2291,#2314,#2337,#2365,#2393,#2421,#2449,#2477,+ #2505,#2533,#2561,#2584,#2612,#2640,#2673,#2701,#2729,#2752,#2780,+ #2808,#2841,#2869,#2897,#2920,#2948,#2976,#3004,#3032,#3064,#3092,+ #3125,#3153,#3181,#3209,#3237,#3258,#3259,#3282,#3310,#3338,#3366,+ #3394,#3427,#3455,#3488,#3516,#3544,#3572,#3600,#3623,#3651));+#1052 = ORIENTED_EDGE('',*,*,#1053,.T.);+#1053 = EDGE_CURVE('',#1054,#1056,#1058,.T.);+#1054 = VERTEX_POINT('',#1055);+#1055 = CARTESIAN_POINT('',(2.724462045979,2.760692661495,0.));+#1056 = VERTEX_POINT('',#1057);+#1057 = CARTESIAN_POINT('',(2.724462046022,3.010692661495,0.));+#1058 = SURFACE_CURVE('',#1059,(#1064,#1075),.PCURVE_S1.);+#1059 = CIRCLE('',#1060,0.125);+#1060 = AXIS2_PLACEMENT_3D('',#1061,#1062,#1063);+#1061 = CARTESIAN_POINT('',(2.724462046015,2.885692661495,0.));+#1062 = DIRECTION('',(0.,0.,-1.));+#1063 = DIRECTION('',(-2.831512802004E-10,-1.,-0.));+#1064 = PCURVE('',#254,#1065);+#1065 = DEFINITIONAL_REPRESENTATION('',(#1066),#1074);+#1066 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1067,#1068,#1069,#1070,+#1071,#1072,#1073),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1067 = CARTESIAN_POINT('',(0.97446204598,0.510692661495));+#1068 = CARTESIAN_POINT('',(0.757955695033,0.510692661556));+#1069 = CARTESIAN_POINT('',(0.86620887056,0.698192661526));+#1070 = CARTESIAN_POINT('',(0.974462046086,0.885692661495));+#1071 = CARTESIAN_POINT('',(1.082715221506,0.698192661464));+#1072 = CARTESIAN_POINT('',(1.190968396926,0.510692661434));+#1073 = CARTESIAN_POINT('',(0.97446204598,0.510692661495));+#1074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1075 = PCURVE('',#1076,#1081);+#1076 = CYLINDRICAL_SURFACE('',#1077,0.125);+#1077 = AXIS2_PLACEMENT_3D('',#1078,#1079,#1080);+#1078 = CARTESIAN_POINT('',(2.724462046015,2.885692661495,+ 9.314404469578E-02));+#1079 = DIRECTION('',(0.,0.,-1.));+#1080 = DIRECTION('',(0.,-1.,0.));+#1081 = DEFINITIONAL_REPRESENTATION('',(#1082),#1086);+#1082 = LINE('',#1083,#1084);+#1083 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1084 = VECTOR('',#1085,1.);+#1085 = DIRECTION('',(1.,0.));+#1086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1087 = ORIENTED_EDGE('',*,*,#1088,.F.);+#1088 = EDGE_CURVE('',#1089,#1056,#1091,.T.);+#1089 = VERTEX_POINT('',#1090);+#1090 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,0.));+#1091 = SURFACE_CURVE('',#1092,(#1096,#1103),.PCURVE_S1.);+#1092 = LINE('',#1093,#1094);+#1093 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,0.));+#1094 = VECTOR('',#1095,1.);+#1095 = DIRECTION('',(-1.,-4.846916564567E-13,0.));+#1096 = PCURVE('',#254,#1097);+#1097 = DEFINITIONAL_REPRESENTATION('',(#1098),#1102);+#1098 = LINE('',#1099,#1100);+#1099 = CARTESIAN_POINT('',(1.674462039427,0.760692661496));+#1100 = VECTOR('',#1101,1.);+#1101 = DIRECTION('',(-1.,-4.846916564567E-13));+#1102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1103 = PCURVE('',#1104,#1109);+#1104 = PLANE('',#1105);+#1105 = AXIS2_PLACEMENT_3D('',#1106,#1107,#1108);+#1106 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+ 9.314404469578E-02));+#1107 = DIRECTION('',(0.,1.,0.));+#1108 = DIRECTION('',(-1.,0.,0.));+#1109 = DEFINITIONAL_REPRESENTATION('',(#1110),#1114);+#1110 = LINE('',#1111,#1112);+#1111 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1112 = VECTOR('',#1113,1.);+#1113 = DIRECTION('',(1.,0.));+#1114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1115 = ORIENTED_EDGE('',*,*,#1116,.F.);+#1116 = EDGE_CURVE('',#1117,#1089,#1119,.T.);+#1117 = VERTEX_POINT('',#1118);+#1118 = CARTESIAN_POINT('',(3.5,2.975441613229,0.));+#1119 = SURFACE_CURVE('',#1120,(#1124,#1131),.PCURVE_S1.);+#1120 = LINE('',#1121,#1122);+#1121 = CARTESIAN_POINT('',(3.5,2.975441613229,0.));+#1122 = VECTOR('',#1123,1.);+#1123 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1124 = PCURVE('',#254,#1125);+#1125 = DEFINITIONAL_REPRESENTATION('',(#1126),#1130);+#1126 = LINE('',#1127,#1128);+#1127 = CARTESIAN_POINT('',(1.75,0.725441613229));+#1128 = VECTOR('',#1129,1.);+#1129 = DIRECTION('',(-0.906183139998,0.422885465325));+#1130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1131 = PCURVE('',#1132,#1137);+#1132 = PLANE('',#1133);+#1133 = AXIS2_PLACEMENT_3D('',#1134,#1135,#1136);+#1134 = CARTESIAN_POINT('',(3.499462039424,2.975692661498,+ 9.314404469578E-02));+#1135 = DIRECTION('',(0.422885465325,0.906183139998,0.));+#1136 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1137 = DEFINITIONAL_REPRESENTATION('',(#1138),#1142);+#1138 = LINE('',#1139,#1140);+#1139 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#1140 = VECTOR('',#1141,1.);+#1141 = DIRECTION('',(1.,0.));+#1142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1143 = ORIENTED_EDGE('',*,*,#1144,.F.);+#1144 = EDGE_CURVE('',#1145,#1117,#1147,.T.);+#1145 = VERTEX_POINT('',#1146);+#1146 = CARTESIAN_POINT('',(3.5,3.295943709768,0.));+#1147 = SURFACE_CURVE('',#1148,(#1152,#1159),.PCURVE_S1.);+#1148 = LINE('',#1149,#1150);+#1149 = CARTESIAN_POINT('',(3.5,3.295943709768,0.));+#1150 = VECTOR('',#1151,1.);+#1151 = DIRECTION('',(0.,-1.,0.));+#1152 = PCURVE('',#254,#1153);+#1153 = DEFINITIONAL_REPRESENTATION('',(#1154),#1158);+#1154 = LINE('',#1155,#1156);+#1155 = CARTESIAN_POINT('',(1.75,1.045943709768));+#1156 = VECTOR('',#1157,1.);+#1157 = DIRECTION('',(0.,-1.));+#1158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1159 = PCURVE('',#221,#1160);+#1160 = DEFINITIONAL_REPRESENTATION('',(#1161),#1165);+#1161 = LINE('',#1162,#1163);+#1162 = CARTESIAN_POINT('',(3.295943709768,0.));+#1163 = VECTOR('',#1164,1.);+#1164 = DIRECTION('',(-1.,0.));+#1165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1166 = ORIENTED_EDGE('',*,*,#1167,.F.);+#1167 = EDGE_CURVE('',#1168,#1145,#1170,.T.);+#1168 = VERTEX_POINT('',#1169);+#1169 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,0.));+#1170 = SURFACE_CURVE('',#1171,(#1175,#1182),.PCURVE_S1.);+#1171 = LINE('',#1172,#1173);+#1172 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,0.));+#1173 = VECTOR('',#1174,1.);+#1174 = DIRECTION('',(0.906183139956,0.422885465415,0.));+#1175 = PCURVE('',#254,#1176);+#1176 = DEFINITIONAL_REPRESENTATION('',(#1177),#1181);+#1177 = LINE('',#1178,#1179);+#1178 = CARTESIAN_POINT('',(1.674462039427,1.010692661492));+#1179 = VECTOR('',#1180,1.);+#1180 = DIRECTION('',(0.906183139956,0.422885465415));+#1181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1182 = PCURVE('',#1183,#1188);+#1183 = PLANE('',#1184);+#1184 = AXIS2_PLACEMENT_3D('',#1185,#1186,#1187);+#1185 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,+ 9.314404469578E-02));+#1186 = DIRECTION('',(0.422885465415,-0.906183139956,0.));+#1187 = DIRECTION('',(0.906183139956,0.422885465415,0.));+#1188 = DEFINITIONAL_REPRESENTATION('',(#1189),#1193);+#1189 = LINE('',#1190,#1191);+#1190 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1191 = VECTOR('',#1192,1.);+#1192 = DIRECTION('',(1.,0.));+#1193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1194 = ORIENTED_EDGE('',*,*,#1195,.F.);+#1195 = EDGE_CURVE('',#1196,#1168,#1198,.T.);+#1196 = VERTEX_POINT('',#1197);+#1197 = CARTESIAN_POINT('',(2.724462046035,3.260692661495,0.));+#1198 = SURFACE_CURVE('',#1199,(#1203,#1210),.PCURVE_S1.);+#1199 = LINE('',#1200,#1201);+#1200 = CARTESIAN_POINT('',(2.724462046022,3.260692661493,0.));+#1201 = VECTOR('',#1202,1.);+#1202 = DIRECTION('',(1.,-1.301815810282E-12,0.));+#1203 = PCURVE('',#254,#1204);+#1204 = DEFINITIONAL_REPRESENTATION('',(#1205),#1209);+#1205 = LINE('',#1206,#1207);+#1206 = CARTESIAN_POINT('',(0.974462046022,1.010692661493));+#1207 = VECTOR('',#1208,1.);+#1208 = DIRECTION('',(1.,-1.301815810282E-12));+#1209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1210 = PCURVE('',#1211,#1216);+#1211 = PLANE('',#1212);+#1212 = AXIS2_PLACEMENT_3D('',#1213,#1214,#1215);+#1213 = CARTESIAN_POINT('',(3.349462039412,3.260692661492,+ 9.314404469578E-02));+#1214 = DIRECTION('',(0.,-1.,0.));+#1215 = DIRECTION('',(1.,0.,0.));+#1216 = DEFINITIONAL_REPRESENTATION('',(#1217),#1221);+#1217 = LINE('',#1218,#1219);+#1218 = CARTESIAN_POINT('',(-0.62499999339,-9.314404469578E-02));+#1219 = VECTOR('',#1220,1.);+#1220 = DIRECTION('',(1.,0.));+#1221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1222 = ORIENTED_EDGE('',*,*,#1223,.T.);+#1223 = EDGE_CURVE('',#1196,#1224,#1226,.T.);+#1224 = VERTEX_POINT('',#1225);+#1225 = CARTESIAN_POINT('',(2.724462046035,3.510692661495,0.));+#1226 = SURFACE_CURVE('',#1227,(#1232,#1243),.PCURVE_S1.);+#1227 = CIRCLE('',#1228,0.125);+#1228 = AXIS2_PLACEMENT_3D('',#1229,#1230,#1231);+#1229 = CARTESIAN_POINT('',(2.724462046015,3.385692661495,0.));+#1230 = DIRECTION('',(0.,0.,-1.));+#1231 = DIRECTION('',(1.659081760863E-10,-1.,0.));+#1232 = PCURVE('',#254,#1233);+#1233 = DEFINITIONAL_REPRESENTATION('',(#1234),#1242);+#1234 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1235,#1236,#1237,#1238,+#1239,#1240,#1241),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1235 = CARTESIAN_POINT('',(0.974462046036,1.010692661495));+#1236 = CARTESIAN_POINT('',(0.75795569509,1.010692661459));+#1237 = CARTESIAN_POINT('',(0.866208870532,1.198192661477));+#1238 = CARTESIAN_POINT('',(0.974462045974,1.385692661495));+#1239 = CARTESIAN_POINT('',(1.082715221478,1.198192661513));+#1240 = CARTESIAN_POINT('',(1.190968396982,1.010692661531));+#1241 = CARTESIAN_POINT('',(0.974462046036,1.010692661495));+#1242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1243 = PCURVE('',#1244,#1249);+#1244 = CYLINDRICAL_SURFACE('',#1245,0.125);+#1245 = AXIS2_PLACEMENT_3D('',#1246,#1247,#1248);+#1246 = CARTESIAN_POINT('',(2.724462046015,3.385692661495,+ 9.314404469578E-02));+#1247 = DIRECTION('',(0.,0.,-1.));+#1248 = DIRECTION('',(0.,-1.,0.));+#1249 = DEFINITIONAL_REPRESENTATION('',(#1250),#1254);+#1250 = LINE('',#1251,#1252);+#1251 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1252 = VECTOR('',#1253,1.);+#1253 = DIRECTION('',(1.,0.));+#1254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1255 = ORIENTED_EDGE('',*,*,#1256,.F.);+#1256 = EDGE_CURVE('',#1257,#1224,#1259,.T.);+#1257 = VERTEX_POINT('',#1258);+#1258 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,0.));+#1259 = SURFACE_CURVE('',#1260,(#1264,#1271),.PCURVE_S1.);+#1260 = LINE('',#1261,#1262);+#1261 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,0.));+#1262 = VECTOR('',#1263,1.);+#1263 = DIRECTION('',(-1.,-1.298643744467E-12,0.));+#1264 = PCURVE('',#254,#1265);+#1265 = DEFINITIONAL_REPRESENTATION('',(#1266),#1270);+#1266 = LINE('',#1267,#1268);+#1267 = CARTESIAN_POINT('',(1.674462039427,1.260692661498));+#1268 = VECTOR('',#1269,1.);+#1269 = DIRECTION('',(-1.,-1.298643744467E-12));+#1270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1271 = PCURVE('',#1272,#1277);+#1272 = PLANE('',#1273);+#1273 = AXIS2_PLACEMENT_3D('',#1274,#1275,#1276);+#1274 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+ 9.314404469578E-02));+#1275 = DIRECTION('',(0.,1.,0.));+#1276 = DIRECTION('',(-1.,0.,0.));+#1277 = DEFINITIONAL_REPRESENTATION('',(#1278),#1282);+#1278 = LINE('',#1279,#1280);+#1279 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1280 = VECTOR('',#1281,1.);+#1281 = DIRECTION('',(1.,0.));+#1282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1283 = ORIENTED_EDGE('',*,*,#1284,.F.);+#1284 = EDGE_CURVE('',#1285,#1257,#1287,.T.);+#1285 = VERTEX_POINT('',#1286);+#1286 = CARTESIAN_POINT('',(3.5,3.475441613231,0.));+#1287 = SURFACE_CURVE('',#1288,(#1292,#1299),.PCURVE_S1.);+#1288 = LINE('',#1289,#1290);+#1289 = CARTESIAN_POINT('',(3.5,3.475441613231,0.));+#1290 = VECTOR('',#1291,1.);+#1291 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1292 = PCURVE('',#254,#1293);+#1293 = DEFINITIONAL_REPRESENTATION('',(#1294),#1298);+#1294 = LINE('',#1295,#1296);+#1295 = CARTESIAN_POINT('',(1.75,1.225441613231));+#1296 = VECTOR('',#1297,1.);+#1297 = DIRECTION('',(-0.906183139998,0.422885465325));+#1298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1299 = PCURVE('',#1300,#1305);+#1300 = PLANE('',#1301);+#1301 = AXIS2_PLACEMENT_3D('',#1302,#1303,#1304);+#1302 = CARTESIAN_POINT('',(3.499462039424,3.4756926615,+ 9.314404469578E-02));+#1303 = DIRECTION('',(0.422885465325,0.906183139998,0.));+#1304 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#1305 = DEFINITIONAL_REPRESENTATION('',(#1306),#1310);+#1306 = LINE('',#1307,#1308);+#1307 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#1308 = VECTOR('',#1309,1.);+#1309 = DIRECTION('',(1.,0.));+#1310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1311 = ORIENTED_EDGE('',*,*,#1312,.F.);+#1312 = EDGE_CURVE('',#1313,#1285,#1315,.T.);+#1313 = VERTEX_POINT('',#1314);+#1314 = CARTESIAN_POINT('',(3.5,4.045943712856,0.));+#1315 = SURFACE_CURVE('',#1316,(#1320,#1327),.PCURVE_S1.);+#1316 = LINE('',#1317,#1318);+#1317 = CARTESIAN_POINT('',(3.5,4.045943712856,0.));+#1318 = VECTOR('',#1319,1.);+#1319 = DIRECTION('',(0.,-1.,0.));+#1320 = PCURVE('',#254,#1321);+#1321 = DEFINITIONAL_REPRESENTATION('',(#1322),#1326);+#1322 = LINE('',#1323,#1324);+#1323 = CARTESIAN_POINT('',(1.75,1.795943712856));+#1324 = VECTOR('',#1325,1.);+#1325 = DIRECTION('',(0.,-1.));+#1326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1327 = PCURVE('',#221,#1328);+#1328 = DEFINITIONAL_REPRESENTATION('',(#1329),#1333);+#1329 = LINE('',#1330,#1331);+#1330 = CARTESIAN_POINT('',(4.045943712856,0.));+#1331 = VECTOR('',#1332,1.);+#1332 = DIRECTION('',(-1.,0.));+#1333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1334 = ORIENTED_EDGE('',*,*,#1335,.F.);+#1335 = EDGE_CURVE('',#1336,#1313,#1338,.T.);+#1336 = VERTEX_POINT('',#1337);+#1337 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,0.));+#1338 = SURFACE_CURVE('',#1339,(#1343,#1350),.PCURVE_S1.);+#1339 = LINE('',#1340,#1341);+#1340 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,0.));+#1341 = VECTOR('',#1342,1.);+#1342 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#1343 = PCURVE('',#254,#1344);+#1344 = DEFINITIONAL_REPRESENTATION('',(#1345),#1349);+#1345 = LINE('',#1346,#1347);+#1346 = CARTESIAN_POINT('',(1.674462032806,1.760692661499));+#1347 = VECTOR('',#1348,1.);+#1348 = DIRECTION('',(0.906183139998,0.422885465325));+#1349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1350 = PCURVE('',#1351,#1356);+#1351 = PLANE('',#1352);+#1352 = AXIS2_PLACEMENT_3D('',#1353,#1354,#1355);+#1353 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,+ 9.314404469578E-02));+#1354 = DIRECTION('',(0.422885465325,-0.906183139998,0.));+#1355 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#1356 = DEFINITIONAL_REPRESENTATION('',(#1357),#1361);+#1357 = LINE('',#1358,#1359);+#1358 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1359 = VECTOR('',#1360,1.);+#1360 = DIRECTION('',(1.,0.));+#1361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1362 = ORIENTED_EDGE('',*,*,#1363,.F.);+#1363 = EDGE_CURVE('',#1364,#1336,#1366,.T.);+#1364 = VERTEX_POINT('',#1365);+#1365 = CARTESIAN_POINT('',(2.674462039381,4.010692661494,0.));+#1366 = SURFACE_CURVE('',#1367,(#1371,#1378),.PCURVE_S1.);+#1367 = LINE('',#1368,#1369);+#1368 = CARTESIAN_POINT('',(2.674462039407,4.010692661498,0.));+#1369 = VECTOR('',#1370,1.);+#1370 = DIRECTION('',(1.,2.259525919604E-12,0.));+#1371 = PCURVE('',#254,#1372);+#1372 = DEFINITIONAL_REPRESENTATION('',(#1373),#1377);+#1373 = LINE('',#1374,#1375);+#1374 = CARTESIAN_POINT('',(0.924462039407,1.760692661498));+#1375 = VECTOR('',#1376,1.);+#1376 = DIRECTION('',(1.,2.259525919604E-12));+#1377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1378 = PCURVE('',#1379,#1384);+#1379 = PLANE('',#1380);+#1380 = AXIS2_PLACEMENT_3D('',#1381,#1382,#1383);+#1381 = CARTESIAN_POINT('',(3.349462032809,4.010692661499,+ 9.314404469578E-02));+#1382 = DIRECTION('',(0.,-1.,0.));+#1383 = DIRECTION('',(1.,0.,0.));+#1384 = DEFINITIONAL_REPRESENTATION('',(#1385),#1389);+#1385 = LINE('',#1386,#1387);+#1386 = CARTESIAN_POINT('',(-0.674999993402,-9.314404469578E-02));+#1387 = VECTOR('',#1388,1.);+#1388 = DIRECTION('',(1.,0.));+#1389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1390 = ORIENTED_EDGE('',*,*,#1391,.T.);+#1391 = EDGE_CURVE('',#1364,#1392,#1394,.T.);+#1392 = VERTEX_POINT('',#1393);+#1393 = CARTESIAN_POINT('',(2.574462039417,4.110692661496,0.));+#1394 = SURFACE_CURVE('',#1395,(#1400,#1411),.PCURVE_S1.);+#1395 = CIRCLE('',#1396,0.100000000003);+#1396 = AXIS2_PLACEMENT_3D('',#1397,#1398,#1399);+#1397 = CARTESIAN_POINT('',(2.67446203942,4.110692661497,0.));+#1398 = DIRECTION('',(0.,0.,-1.));+#1399 = DIRECTION('',(-3.862288266876E-10,-1.,-0.));+#1400 = PCURVE('',#254,#1401);+#1401 = DEFINITIONAL_REPRESENTATION('',(#1402),#1410);+#1402 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1403,#1404,#1405,#1406,+#1407,#1408,#1409),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1403 = CARTESIAN_POINT('',(0.924462039381,1.760692661494));+#1404 = CARTESIAN_POINT('',(0.751256958619,1.760692661561));+#1405 = CARTESIAN_POINT('',(0.837859499058,1.910692661532));+#1406 = CARTESIAN_POINT('',(0.924462039497,2.060692661503));+#1407 = CARTESIAN_POINT('',(1.01106457982,1.910692661465));+#1408 = CARTESIAN_POINT('',(1.097667120143,1.760692661427));+#1409 = CARTESIAN_POINT('',(0.924462039381,1.760692661494));+#1410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1411 = PCURVE('',#1412,#1417);+#1412 = CYLINDRICAL_SURFACE('',#1413,0.100000000003);+#1413 = AXIS2_PLACEMENT_3D('',#1414,#1415,#1416);+#1414 = CARTESIAN_POINT('',(2.67446203942,4.110692661497,+ 9.314404469578E-02));+#1415 = DIRECTION('',(0.,0.,-1.));+#1416 = DIRECTION('',(0.,-1.,0.));+#1417 = DEFINITIONAL_REPRESENTATION('',(#1418),#1422);+#1418 = LINE('',#1419,#1420);+#1419 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1420 = VECTOR('',#1421,1.);+#1421 = DIRECTION('',(1.,0.));+#1422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1423 = ORIENTED_EDGE('',*,*,#1424,.F.);+#1424 = EDGE_CURVE('',#1425,#1392,#1427,.T.);+#1425 = VERTEX_POINT('',#1426);+#1426 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,0.));+#1427 = SURFACE_CURVE('',#1428,(#1432,#1439),.PCURVE_S1.);+#1428 = LINE('',#1429,#1430);+#1429 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,0.));+#1430 = VECTOR('',#1431,1.);+#1431 = DIRECTION('',(-1.301815798029E-12,-1.,0.));+#1432 = PCURVE('',#254,#1433);+#1433 = DEFINITIONAL_REPRESENTATION('',(#1434),#1438);+#1434 = LINE('',#1435,#1436);+#1435 = CARTESIAN_POINT('',(0.824462039417,2.035692661494));+#1436 = VECTOR('',#1437,1.);+#1437 = DIRECTION('',(-1.301815798029E-12,-1.));+#1438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1439 = PCURVE('',#1440,#1445);+#1440 = PLANE('',#1441);+#1441 = AXIS2_PLACEMENT_3D('',#1442,#1443,#1444);+#1442 = CARTESIAN_POINT('',(2.574462039417,4.485692661496,+ 9.314404469578E-02));+#1443 = DIRECTION('',(-1.,0.,0.));+#1444 = DIRECTION('',(0.,-1.,0.));+#1445 = DEFINITIONAL_REPRESENTATION('',(#1446),#1450);+#1446 = LINE('',#1447,#1448);+#1447 = CARTESIAN_POINT('',(0.200000000002,-9.314404469578E-02));+#1448 = VECTOR('',#1449,1.);+#1449 = DIRECTION('',(1.,0.));+#1450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1451 = ORIENTED_EDGE('',*,*,#1452,.T.);+#1452 = EDGE_CURVE('',#1425,#1453,#1455,.T.);+#1453 = VERTEX_POINT('',#1454);+#1454 = CARTESIAN_POINT('',(2.674462039417,4.385692661494,0.));+#1455 = SURFACE_CURVE('',#1456,(#1461,#1472),.PCURVE_S1.);+#1456 = CIRCLE('',#1457,0.1);+#1457 = AXIS2_PLACEMENT_3D('',#1458,#1459,#1460);+#1458 = CARTESIAN_POINT('',(2.674462039417,4.285692661494,0.));+#1459 = DIRECTION('',(0.,0.,-1.));+#1460 = DIRECTION('',(-1.,-1.7763568394E-14,-0.));+#1461 = PCURVE('',#254,#1462);+#1462 = DEFINITIONAL_REPRESENTATION('',(#1463),#1471);+#1463 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1464,#1465,#1466,#1467,+#1468,#1469,#1470),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1464 = CARTESIAN_POINT('',(0.824462039417,2.035692661494));+#1465 = CARTESIAN_POINT('',(0.824462039417,2.208897742251));+#1466 = CARTESIAN_POINT('',(0.974462039417,2.122295201872));+#1467 = CARTESIAN_POINT('',(1.124462039417,2.035692661494));+#1468 = CARTESIAN_POINT('',(0.974462039417,1.949090121116));+#1469 = CARTESIAN_POINT('',(0.824462039417,1.862487580737));+#1470 = CARTESIAN_POINT('',(0.824462039417,2.035692661494));+#1471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1472 = PCURVE('',#1473,#1478);+#1473 = CYLINDRICAL_SURFACE('',#1474,0.1);+#1474 = AXIS2_PLACEMENT_3D('',#1475,#1476,#1477);+#1475 = CARTESIAN_POINT('',(2.674462039417,4.285692661494,+ 9.314404469578E-02));+#1476 = DIRECTION('',(0.,0.,-1.));+#1477 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1478 = DEFINITIONAL_REPRESENTATION('',(#1479),#1483);+#1479 = LINE('',#1480,#1481);+#1480 = CARTESIAN_POINT('',(5.497787143782,9.314404469578E-02));+#1481 = VECTOR('',#1482,1.);+#1482 = DIRECTION('',(1.,0.));+#1483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1484 = ORIENTED_EDGE('',*,*,#1485,.F.);+#1485 = EDGE_CURVE('',#1486,#1453,#1488,.T.);+#1486 = VERTEX_POINT('',#1487);+#1487 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#1488 = SURFACE_CURVE('',#1489,(#1493,#1500),.PCURVE_S1.);+#1489 = LINE('',#1490,#1491);+#1490 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#1491 = VECTOR('',#1492,1.);+#1492 = DIRECTION('',(-1.,0.,0.));+#1493 = PCURVE('',#254,#1494);+#1494 = DEFINITIONAL_REPRESENTATION('',(#1495),#1499);+#1495 = LINE('',#1496,#1497);+#1496 = CARTESIAN_POINT('',(1.54946203942,2.135692661494));+#1497 = VECTOR('',#1498,1.);+#1498 = DIRECTION('',(-1.,0.));+#1499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1500 = PCURVE('',#1501,#1506);+#1501 = PLANE('',#1502);+#1502 = AXIS2_PLACEMENT_3D('',#1503,#1504,#1505);+#1503 = CARTESIAN_POINT('',(3.349462032809,4.385692661494,+ 9.314404469578E-02));+#1504 = DIRECTION('',(0.,1.,0.));+#1505 = DIRECTION('',(-1.,0.,0.));+#1506 = DEFINITIONAL_REPRESENTATION('',(#1507),#1511);+#1507 = LINE('',#1508,#1509);+#1508 = CARTESIAN_POINT('',(4.9999993389E-02,-9.314404469578E-02));+#1509 = VECTOR('',#1510,1.);+#1510 = DIRECTION('',(1.,0.));+#1511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1512 = ORIENTED_EDGE('',*,*,#1513,.T.);+#1513 = EDGE_CURVE('',#1486,#1514,#1516,.T.);+#1514 = VERTEX_POINT('',#1515);+#1515 = CARTESIAN_POINT('',(3.29946203942,4.260692661496,0.));+#1516 = SURFACE_CURVE('',#1517,(#1521,#1528),.PCURVE_S1.);+#1517 = LINE('',#1518,#1519);+#1518 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#1519 = VECTOR('',#1520,1.);+#1520 = DIRECTION('',(0.,-1.,0.));+#1521 = PCURVE('',#254,#1522);+#1522 = DEFINITIONAL_REPRESENTATION('',(#1523),#1527);+#1523 = LINE('',#1524,#1525);+#1524 = CARTESIAN_POINT('',(1.54946203942,2.135692661494));+#1525 = VECTOR('',#1526,1.);+#1526 = DIRECTION('',(0.,-1.));+#1527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1528 = PCURVE('',#1529,#1534);+#1529 = PLANE('',#1530);+#1530 = AXIS2_PLACEMENT_3D('',#1531,#1532,#1533);+#1531 = CARTESIAN_POINT('',(3.29946203942,4.385692661495,+ 9.314404469578E-02));+#1532 = DIRECTION('',(1.,0.,0.));+#1533 = DIRECTION('',(0.,-1.,0.));+#1534 = DEFINITIONAL_REPRESENTATION('',(#1535),#1539);+#1535 = LINE('',#1536,#1537);+#1536 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#1537 = VECTOR('',#1538,1.);+#1538 = DIRECTION('',(1.,0.));+#1539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1540 = ORIENTED_EDGE('',*,*,#1541,.F.);+#1541 = EDGE_CURVE('',#1542,#1514,#1544,.T.);+#1542 = VERTEX_POINT('',#1543);+#1543 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,0.));+#1544 = SURFACE_CURVE('',#1545,(#1549,#1556),.PCURVE_S1.);+#1545 = LINE('',#1546,#1547);+#1546 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,0.));+#1547 = VECTOR('',#1548,1.);+#1548 = DIRECTION('',(-1.,0.,0.));+#1549 = PCURVE('',#254,#1550);+#1550 = DEFINITIONAL_REPRESENTATION('',(#1551),#1555);+#1551 = LINE('',#1552,#1553);+#1552 = CARTESIAN_POINT('',(1.674462039425,2.010692661496));+#1553 = VECTOR('',#1554,1.);+#1554 = DIRECTION('',(-1.,0.));+#1555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1556 = PCURVE('',#1557,#1562);+#1557 = PLANE('',#1558);+#1558 = AXIS2_PLACEMENT_3D('',#1559,#1560,#1561);+#1559 = CARTESIAN_POINT('',(3.424462032806,4.260692661496,+ 9.314404469578E-02));+#1560 = DIRECTION('',(0.,1.,0.));+#1561 = DIRECTION('',(-1.,0.,0.));+#1562 = DEFINITIONAL_REPRESENTATION('',(#1563),#1567);+#1563 = LINE('',#1564,#1565);+#1564 = CARTESIAN_POINT('',(-6.619000014751E-09,-9.314404469578E-02));+#1565 = VECTOR('',#1566,1.);+#1566 = DIRECTION('',(1.,0.));+#1567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1568 = ORIENTED_EDGE('',*,*,#1569,.T.);+#1569 = EDGE_CURVE('',#1542,#1570,#1572,.T.);+#1570 = VERTEX_POINT('',#1571);+#1571 = CARTESIAN_POINT('',(3.5,4.225441613226,0.));+#1572 = SURFACE_CURVE('',#1573,(#1577,#1584),.PCURVE_S1.);+#1573 = LINE('',#1574,#1575);+#1574 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,0.));+#1575 = VECTOR('',#1576,1.);+#1576 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#1577 = PCURVE('',#254,#1578);+#1578 = DEFINITIONAL_REPRESENTATION('',(#1579),#1583);+#1579 = LINE('',#1580,#1581);+#1580 = CARTESIAN_POINT('',(1.674462039425,2.010692661496));+#1581 = VECTOR('',#1582,1.);+#1582 = DIRECTION('',(0.906183139987,-0.422885465348));+#1583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1584 = PCURVE('',#1585,#1590);+#1585 = PLANE('',#1586);+#1586 = AXIS2_PLACEMENT_3D('',#1587,#1588,#1589);+#1587 = CARTESIAN_POINT('',(3.424462039427,4.260692661495,+ 9.314404469578E-02));+#1588 = DIRECTION('',(0.422885465348,0.906183139987,0.));+#1589 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#1590 = DEFINITIONAL_REPRESENTATION('',(#1591),#1595);+#1591 = LINE('',#1592,#1593);+#1592 = CARTESIAN_POINT('',(-2.235504117324E-12,9.314404469578E-02));+#1593 = VECTOR('',#1594,1.);+#1594 = DIRECTION('',(1.,0.));+#1595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1596 = ORIENTED_EDGE('',*,*,#1597,.F.);+#1597 = EDGE_CURVE('',#1598,#1570,#1600,.T.);+#1598 = VERTEX_POINT('',#1599);+#1599 = CARTESIAN_POINT('',(3.5,4.5,0.));+#1600 = SURFACE_CURVE('',#1601,(#1605,#1612),.PCURVE_S1.);+#1601 = LINE('',#1602,#1603);+#1602 = CARTESIAN_POINT('',(3.5,4.5,0.));+#1603 = VECTOR('',#1604,1.);+#1604 = DIRECTION('',(0.,-1.,0.));+#1605 = PCURVE('',#254,#1606);+#1606 = DEFINITIONAL_REPRESENTATION('',(#1607),#1611);+#1607 = LINE('',#1608,#1609);+#1608 = CARTESIAN_POINT('',(1.75,2.25));+#1609 = VECTOR('',#1610,1.);+#1610 = DIRECTION('',(0.,-1.));+#1611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1612 = PCURVE('',#221,#1613);+#1613 = DEFINITIONAL_REPRESENTATION('',(#1614),#1618);+#1614 = LINE('',#1615,#1616);+#1615 = CARTESIAN_POINT('',(4.5,0.));+#1616 = VECTOR('',#1617,1.);+#1617 = DIRECTION('',(-1.,0.));+#1618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1619 = ORIENTED_EDGE('',*,*,#1620,.F.);+#1620 = EDGE_CURVE('',#1621,#1598,#1623,.T.);+#1621 = VERTEX_POINT('',#1622);+#1622 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#1623 = SURFACE_CURVE('',#1624,(#1628,#1635),.PCURVE_S1.);+#1624 = LINE('',#1625,#1626);+#1625 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#1626 = VECTOR('',#1627,1.);+#1627 = DIRECTION('',(1.,0.,0.));+#1628 = PCURVE('',#254,#1629);+#1629 = DEFINITIONAL_REPRESENTATION('',(#1630),#1634);+#1630 = LINE('',#1631,#1632);+#1631 = CARTESIAN_POINT('',(0.589462039424,2.25));+#1632 = VECTOR('',#1633,1.);+#1633 = DIRECTION('',(1.,0.));+#1634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1635 = PCURVE('',#195,#1636);+#1636 = DEFINITIONAL_REPRESENTATION('',(#1637),#1641);+#1637 = LINE('',#1638,#1639);+#1638 = CARTESIAN_POINT('',(1.160537960576,0.));+#1639 = VECTOR('',#1640,1.);+#1640 = DIRECTION('',(-1.,0.));+#1641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1642 = ORIENTED_EDGE('',*,*,#1643,.T.);+#1643 = EDGE_CURVE('',#1621,#1644,#1646,.T.);+#1644 = VERTEX_POINT('',#1645);+#1645 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,0.));+#1646 = SURFACE_CURVE('',#1647,(#1651,#1658),.PCURVE_S1.);+#1647 = LINE('',#1648,#1649);+#1648 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#1649 = VECTOR('',#1650,1.);+#1650 = DIRECTION('',(0.,-1.,0.));+#1651 = PCURVE('',#254,#1652);+#1652 = DEFINITIONAL_REPRESENTATION('',(#1653),#1657);+#1653 = LINE('',#1654,#1655);+#1654 = CARTESIAN_POINT('',(0.589462039424,2.25));+#1655 = VECTOR('',#1656,1.);+#1656 = DIRECTION('',(0.,-1.));+#1657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1658 = PCURVE('',#1659,#1664);+#1659 = PLANE('',#1660);+#1660 = AXIS2_PLACEMENT_3D('',#1661,#1662,#1663);+#1661 = CARTESIAN_POINT('',(2.339462039424,4.485692661496,+ 9.314404469578E-02));+#1662 = DIRECTION('',(1.,0.,0.));+#1663 = DIRECTION('',(0.,0.,-1.));+#1664 = DEFINITIONAL_REPRESENTATION('',(#1665),#1669);+#1665 = LINE('',#1666,#1667);+#1666 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#1667 = VECTOR('',#1668,1.);+#1668 = DIRECTION('',(0.,-1.));+#1669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1670 = ORIENTED_EDGE('',*,*,#1671,.T.);+#1671 = EDGE_CURVE('',#1644,#1672,#1674,.T.);+#1672 = VERTEX_POINT('',#1673);+#1673 = CARTESIAN_POINT('',(2.374462039413,4.410692661497,0.));+#1674 = SURFACE_CURVE('',#1675,(#1679,#1686),.PCURVE_S1.);+#1675 = LINE('',#1676,#1677);+#1676 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,0.));+#1677 = VECTOR('',#1678,1.);+#1678 = DIRECTION('',(0.422885465219,-0.906183140048,0.));+#1679 = PCURVE('',#254,#1680);+#1680 = DEFINITIONAL_REPRESENTATION('',(#1681),#1685);+#1681 = LINE('',#1682,#1683);+#1682 = CARTESIAN_POINT('',(0.589462039424,2.235692661497));+#1683 = VECTOR('',#1684,1.);+#1684 = DIRECTION('',(0.422885465219,-0.906183140048));+#1685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1686 = PCURVE('',#1687,#1692);+#1687 = PLANE('',#1688);+#1688 = AXIS2_PLACEMENT_3D('',#1689,#1690,#1691);+#1689 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+ 9.314404469578E-02));+#1690 = DIRECTION('',(0.906183140048,0.422885465219,0.));+#1691 = DIRECTION('',(0.422885465219,-0.906183140048,0.));+#1692 = DEFINITIONAL_REPRESENTATION('',(#1693),#1697);+#1693 = LINE('',#1694,#1695);+#1694 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1695 = VECTOR('',#1696,1.);+#1696 = DIRECTION('',(1.,0.));+#1697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1698 = ORIENTED_EDGE('',*,*,#1699,.F.);+#1699 = EDGE_CURVE('',#1700,#1672,#1702,.T.);+#1700 = VERTEX_POINT('',#1701);+#1701 = CARTESIAN_POINT('',(2.374462039406,4.010692661549,0.));+#1702 = SURFACE_CURVE('',#1703,(#1707,#1714),.PCURVE_S1.);+#1703 = LINE('',#1704,#1705);+#1704 = CARTESIAN_POINT('',(2.374462039411,4.010692661512,0.));+#1705 = VECTOR('',#1706,1.);+#1706 = DIRECTION('',(6.058487045616E-12,1.,0.));+#1707 = PCURVE('',#254,#1708);+#1708 = DEFINITIONAL_REPRESENTATION('',(#1709),#1713);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(0.624462039411,1.760692661512));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(6.058487045616E-12,1.));+#1713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1714 = PCURVE('',#1715,#1720);+#1715 = PLANE('',#1716);+#1716 = AXIS2_PLACEMENT_3D('',#1717,#1718,#1719);+#1717 = CARTESIAN_POINT('',(2.374462039413,4.335692661502,+ 9.314404469578E-02));+#1718 = DIRECTION('',(1.,0.,0.));+#1719 = DIRECTION('',(-0.,1.,0.));+#1720 = DEFINITIONAL_REPRESENTATION('',(#1721),#1725);+#1721 = LINE('',#1722,#1723);+#1722 = CARTESIAN_POINT('',(-0.32499999999,-9.314404469578E-02));+#1723 = VECTOR('',#1724,1.);+#1724 = DIRECTION('',(1.,0.));+#1725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1726 = ORIENTED_EDGE('',*,*,#1727,.T.);+#1727 = EDGE_CURVE('',#1700,#1728,#1730,.T.);+#1728 = VERTEX_POINT('',#1729);+#1729 = CARTESIAN_POINT('',(2.124462039406,4.010692661411,0.));+#1730 = SURFACE_CURVE('',#1731,(#1736,#1747),.PCURVE_S1.);+#1731 = CIRCLE('',#1732,0.125);+#1732 = AXIS2_PLACEMENT_3D('',#1733,#1734,#1735);+#1733 = CARTESIAN_POINT('',(2.249462039406,4.010692661494,0.));+#1734 = DIRECTION('',(0.,0.,-1.));+#1735 = DIRECTION('',(1.,4.417870513862E-10,0.));+#1736 = PCURVE('',#254,#1737);+#1737 = DEFINITIONAL_REPRESENTATION('',(#1738),#1746);+#1738 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1739,#1740,#1741,#1742,+#1743,#1744,#1745),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1739 = CARTESIAN_POINT('',(0.624462039406,1.760692661549));+#1740 = CARTESIAN_POINT('',(0.624462039502,1.544186310603));+#1741 = CARTESIAN_POINT('',(0.436962039454,1.652439485993));+#1742 = CARTESIAN_POINT('',(0.249462039406,1.760692661384));+#1743 = CARTESIAN_POINT('',(0.436962039358,1.868945836939));+#1744 = CARTESIAN_POINT('',(0.62446203931,1.977199012495));+#1745 = CARTESIAN_POINT('',(0.624462039406,1.760692661549));+#1746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1747 = PCURVE('',#1748,#1753);+#1748 = CYLINDRICAL_SURFACE('',#1749,0.125);+#1749 = AXIS2_PLACEMENT_3D('',#1750,#1751,#1752);+#1750 = CARTESIAN_POINT('',(2.249462039406,4.010692661494,+ 9.314404469578E-02));+#1751 = DIRECTION('',(0.,0.,-1.));+#1752 = DIRECTION('',(-1.,2.275162696997E-12,0.));+#1753 = DEFINITIONAL_REPRESENTATION('',(#1754),#1758);+#1754 = LINE('',#1755,#1756);+#1755 = CARTESIAN_POINT('',(3.141592653146,9.314404469578E-02));+#1756 = VECTOR('',#1757,1.);+#1757 = DIRECTION('',(1.,0.));+#1758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1759 = ORIENTED_EDGE('',*,*,#1760,.F.);+#1760 = EDGE_CURVE('',#1761,#1728,#1763,.T.);+#1761 = VERTEX_POINT('',#1762);+#1762 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,0.));+#1763 = SURFACE_CURVE('',#1764,(#1768,#1775),.PCURVE_S1.);+#1764 = LINE('',#1765,#1766);+#1765 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,0.));+#1766 = VECTOR('',#1767,1.);+#1767 = DIRECTION('',(-9.092726570938E-12,-1.,0.));+#1768 = PCURVE('',#254,#1769);+#1769 = DEFINITIONAL_REPRESENTATION('',(#1770),#1774);+#1770 = LINE('',#1771,#1772);+#1771 = CARTESIAN_POINT('',(0.374462039417,2.160692661499));+#1772 = VECTOR('',#1773,1.);+#1773 = DIRECTION('',(-9.092726570938E-12,-1.));+#1774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1775 = PCURVE('',#1776,#1781);+#1776 = PLANE('',#1777);+#1777 = AXIS2_PLACEMENT_3D('',#1778,#1779,#1780);+#1778 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+ 9.314404469578E-02));+#1779 = DIRECTION('',(-1.,0.,0.));+#1780 = DIRECTION('',(0.,-1.,0.));+#1781 = DEFINITIONAL_REPRESENTATION('',(#1782),#1786);+#1782 = LINE('',#1783,#1784);+#1783 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#1784 = VECTOR('',#1785,1.);+#1785 = DIRECTION('',(1.,0.));+#1786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1787 = ORIENTED_EDGE('',*,*,#1788,.F.);+#1788 = EDGE_CURVE('',#1789,#1761,#1791,.T.);+#1789 = VERTEX_POINT('',#1790);+#1790 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,0.));+#1791 = SURFACE_CURVE('',#1792,(#1796,#1803),.PCURVE_S1.);+#1792 = LINE('',#1793,#1794);+#1793 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,0.));+#1794 = VECTOR('',#1795,1.);+#1795 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#1796 = PCURVE('',#254,#1797);+#1797 = DEFINITIONAL_REPRESENTATION('',(#1798),#1802);+#1798 = LINE('',#1799,#1800);+#1799 = CARTESIAN_POINT('',(0.409462039424,2.235692661496));+#1800 = VECTOR('',#1801,1.);+#1801 = DIRECTION('',(-0.422885465415,-0.906183139956));+#1802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1803 = PCURVE('',#1804,#1809);+#1804 = PLANE('',#1805);+#1805 = AXIS2_PLACEMENT_3D('',#1806,#1807,#1808);+#1806 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+ 9.314404469578E-02));+#1807 = DIRECTION('',(-0.906183139956,0.422885465415,0.));+#1808 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#1809 = DEFINITIONAL_REPRESENTATION('',(#1810),#1814);+#1810 = LINE('',#1811,#1812);+#1811 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#1812 = VECTOR('',#1813,1.);+#1813 = DIRECTION('',(1.,0.));+#1814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1815 = ORIENTED_EDGE('',*,*,#1816,.F.);+#1816 = EDGE_CURVE('',#1817,#1789,#1819,.T.);+#1817 = VERTEX_POINT('',#1818);+#1818 = CARTESIAN_POINT('',(2.159462039424,4.5,0.));+#1819 = SURFACE_CURVE('',#1820,(#1824,#1831),.PCURVE_S1.);+#1820 = LINE('',#1821,#1822);+#1821 = CARTESIAN_POINT('',(2.159462039424,4.5,0.));+#1822 = VECTOR('',#1823,1.);+#1823 = DIRECTION('',(0.,-1.,0.));+#1824 = PCURVE('',#254,#1825);+#1825 = DEFINITIONAL_REPRESENTATION('',(#1826),#1830);+#1826 = LINE('',#1827,#1828);+#1827 = CARTESIAN_POINT('',(0.409462039424,2.25));+#1828 = VECTOR('',#1829,1.);+#1829 = DIRECTION('',(0.,-1.));+#1830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1831 = PCURVE('',#1832,#1837);+#1832 = PLANE('',#1833);+#1833 = AXIS2_PLACEMENT_3D('',#1834,#1835,#1836);+#1834 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+ -6.855955304215E-03));+#1835 = DIRECTION('',(-1.,0.,0.));+#1836 = DIRECTION('',(0.,0.,1.));+#1837 = DEFINITIONAL_REPRESENTATION('',(#1838),#1842);+#1838 = LINE('',#1839,#1840);+#1839 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#1840 = VECTOR('',#1841,1.);+#1841 = DIRECTION('',(0.,-1.));+#1842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1843 = ORIENTED_EDGE('',*,*,#1844,.F.);+#1844 = EDGE_CURVE('',#1845,#1817,#1847,.T.);+#1845 = VERTEX_POINT('',#1846);+#1846 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#1847 = SURFACE_CURVE('',#1848,(#1852,#1859),.PCURVE_S1.);+#1848 = LINE('',#1849,#1850);+#1849 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#1850 = VECTOR('',#1851,1.);+#1851 = DIRECTION('',(1.,0.,0.));+#1852 = PCURVE('',#254,#1853);+#1853 = DEFINITIONAL_REPRESENTATION('',(#1854),#1858);+#1854 = LINE('',#1855,#1856);+#1855 = CARTESIAN_POINT('',(8.9462039413E-02,2.25));+#1856 = VECTOR('',#1857,1.);+#1857 = DIRECTION('',(1.,0.));+#1858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1859 = PCURVE('',#195,#1860);+#1860 = DEFINITIONAL_REPRESENTATION('',(#1861),#1865);+#1861 = LINE('',#1862,#1863);+#1862 = CARTESIAN_POINT('',(1.660537960587,0.));+#1863 = VECTOR('',#1864,1.);+#1864 = DIRECTION('',(-1.,0.));+#1865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1866 = ORIENTED_EDGE('',*,*,#1867,.T.);+#1867 = EDGE_CURVE('',#1845,#1868,#1870,.T.);+#1868 = VERTEX_POINT('',#1869);+#1869 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,0.));+#1870 = SURFACE_CURVE('',#1871,(#1875,#1882),.PCURVE_S1.);+#1871 = LINE('',#1872,#1873);+#1872 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#1873 = VECTOR('',#1874,1.);+#1874 = DIRECTION('',(0.,-1.,0.));+#1875 = PCURVE('',#254,#1876);+#1876 = DEFINITIONAL_REPRESENTATION('',(#1877),#1881);+#1877 = LINE('',#1878,#1879);+#1878 = CARTESIAN_POINT('',(8.9462039413E-02,2.25));+#1879 = VECTOR('',#1880,1.);+#1880 = DIRECTION('',(0.,-1.));+#1881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1882 = PCURVE('',#1883,#1888);+#1883 = PLANE('',#1884);+#1884 = AXIS2_PLACEMENT_3D('',#1885,#1886,#1887);+#1885 = CARTESIAN_POINT('',(1.839462039413,4.485692661496,+ 9.314404469578E-02));+#1886 = DIRECTION('',(1.,0.,0.));+#1887 = DIRECTION('',(0.,0.,-1.));+#1888 = DEFINITIONAL_REPRESENTATION('',(#1889),#1893);+#1889 = LINE('',#1890,#1891);+#1890 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#1891 = VECTOR('',#1892,1.);+#1892 = DIRECTION('',(0.,-1.));+#1893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1894 = ORIENTED_EDGE('',*,*,#1895,.T.);+#1895 = EDGE_CURVE('',#1868,#1896,#1898,.T.);+#1896 = VERTEX_POINT('',#1897);+#1897 = CARTESIAN_POINT('',(1.899462039389,4.41069266152,0.));+#1898 = SURFACE_CURVE('',#1899,(#1903,#1910),.PCURVE_S1.);+#1899 = LINE('',#1900,#1901);+#1900 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,0.));+#1901 = VECTOR('',#1902,1.);+#1902 = DIRECTION('',(0.624695047517,-0.780868809473,0.));+#1903 = PCURVE('',#254,#1904);+#1904 = DEFINITIONAL_REPRESENTATION('',(#1905),#1909);+#1905 = LINE('',#1906,#1907);+#1906 = CARTESIAN_POINT('',(8.9462039413E-02,2.235692661497));+#1907 = VECTOR('',#1908,1.);+#1908 = DIRECTION('',(0.624695047517,-0.780868809473));+#1909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1910 = PCURVE('',#1911,#1916);+#1911 = PLANE('',#1912);+#1912 = AXIS2_PLACEMENT_3D('',#1913,#1914,#1915);+#1913 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+ 9.314404469578E-02));+#1914 = DIRECTION('',(0.780868809473,0.624695047517,0.));+#1915 = DIRECTION('',(0.624695047517,-0.780868809473,0.));+#1916 = DEFINITIONAL_REPRESENTATION('',(#1917),#1921);+#1917 = LINE('',#1918,#1919);+#1918 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#1919 = VECTOR('',#1920,1.);+#1920 = DIRECTION('',(1.,0.));+#1921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1922 = ORIENTED_EDGE('',*,*,#1923,.F.);+#1923 = EDGE_CURVE('',#1924,#1896,#1926,.T.);+#1924 = VERTEX_POINT('',#1925);+#1925 = CARTESIAN_POINT('',(1.899462039407,3.285692661358,0.));+#1926 = SURFACE_CURVE('',#1927,(#1931,#1938),.PCURVE_S1.);+#1927 = LINE('',#1928,#1929);+#1928 = CARTESIAN_POINT('',(1.899462039395,3.28569266145,0.));+#1929 = VECTOR('',#1930,1.);+#1930 = DIRECTION('',(-5.387690293568E-12,1.,0.));+#1931 = PCURVE('',#254,#1932);+#1932 = DEFINITIONAL_REPRESENTATION('',(#1933),#1937);+#1933 = LINE('',#1934,#1935);+#1934 = CARTESIAN_POINT('',(0.149462039395,1.03569266145));+#1935 = VECTOR('',#1936,1.);+#1936 = DIRECTION('',(-5.387690293568E-12,1.));+#1937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1938 = PCURVE('',#1939,#1944);+#1939 = PLANE('',#1940);+#1940 = AXIS2_PLACEMENT_3D('',#1941,#1942,#1943);+#1941 = CARTESIAN_POINT('',(1.899462039389,4.335692661502,+ 9.314404469578E-02));+#1942 = DIRECTION('',(1.,0.,0.));+#1943 = DIRECTION('',(-0.,1.,0.));+#1944 = DEFINITIONAL_REPRESENTATION('',(#1945),#1949);+#1945 = LINE('',#1946,#1947);+#1946 = CARTESIAN_POINT('',(-1.050000000052,-9.314404469578E-02));+#1947 = VECTOR('',#1948,1.);+#1948 = DIRECTION('',(1.,0.));+#1949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1950 = ORIENTED_EDGE('',*,*,#1951,.T.);+#1951 = EDGE_CURVE('',#1924,#1952,#1954,.T.);+#1952 = VERTEX_POINT('',#1953);+#1953 = CARTESIAN_POINT('',(1.599462039419,3.285692661496,0.));+#1954 = SURFACE_CURVE('',#1955,(#1960,#1971),.PCURVE_S1.);+#1955 = CIRCLE('',#1956,0.149999999994);+#1956 = AXIS2_PLACEMENT_3D('',#1957,#1958,#1959);+#1957 = CARTESIAN_POINT('',(1.749462039413,3.285692661496,0.));+#1958 = DIRECTION('',(0.,0.,-1.));+#1959 = DIRECTION('',(1.,-9.210587848332E-10,0.));+#1960 = PCURVE('',#254,#1961);+#1961 = DEFINITIONAL_REPRESENTATION('',(#1962),#1970);+#1962 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1963,#1964,#1965,#1966,+#1967,#1968,#1969),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1963 = CARTESIAN_POINT('',(0.149462039407,1.035692661358));+#1964 = CARTESIAN_POINT('',(0.149462039168,0.775885040233));+#1965 = CARTESIAN_POINT('',(-7.553796070365E-02,0.905788851003));+#1966 = CARTESIAN_POINT('',(-0.300537960575,1.035692661772));+#1967 = CARTESIAN_POINT('',(-7.553796046435E-02,1.165596472128));+#1968 = CARTESIAN_POINT('',(0.149462039646,1.295500282483));+#1969 = CARTESIAN_POINT('',(0.149462039407,1.035692661358));+#1970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1971 = PCURVE('',#1972,#1977);+#1972 = CYLINDRICAL_SURFACE('',#1973,0.149999999994);+#1973 = AXIS2_PLACEMENT_3D('',#1974,#1975,#1976);+#1974 = CARTESIAN_POINT('',(1.749462039413,3.285692661496,+ 9.314404469578E-02));+#1975 = DIRECTION('',(0.,0.,-1.));+#1976 = DIRECTION('',(-1.,0.,0.));+#1977 = DEFINITIONAL_REPRESENTATION('',(#1978),#1982);+#1978 = LINE('',#1979,#1980);+#1979 = CARTESIAN_POINT('',(3.141592654511,9.314404469578E-02));+#1980 = VECTOR('',#1981,1.);+#1981 = DIRECTION('',(1.,0.));+#1982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1983 = ORIENTED_EDGE('',*,*,#1984,.F.);+#1984 = EDGE_CURVE('',#1985,#1952,#1987,.T.);+#1985 = VERTEX_POINT('',#1986);+#1986 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,0.));+#1987 = SURFACE_CURVE('',#1988,(#1992,#1999),.PCURVE_S1.);+#1988 = LINE('',#1989,#1990);+#1989 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,0.));+#1990 = VECTOR('',#1991,1.);+#1991 = DIRECTION('',(0.,-1.,0.));+#1992 = PCURVE('',#254,#1993);+#1993 = DEFINITIONAL_REPRESENTATION('',(#1994),#1998);+#1994 = LINE('',#1995,#1996);+#1995 = CARTESIAN_POINT('',(-0.150537960581,2.160692661497));+#1996 = VECTOR('',#1997,1.);+#1997 = DIRECTION('',(0.,-1.));+#1998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1999 = PCURVE('',#2000,#2005);+#2000 = PLANE('',#2001);+#2001 = AXIS2_PLACEMENT_3D('',#2002,#2003,#2004);+#2002 = CARTESIAN_POINT('',(1.599462039419,4.410692661499,+ 9.314404469578E-02));+#2003 = DIRECTION('',(-1.,0.,0.));+#2004 = DIRECTION('',(0.,-1.,0.));+#2005 = DEFINITIONAL_REPRESENTATION('',(#2006),#2010);+#2006 = LINE('',#2007,#2008);+#2007 = CARTESIAN_POINT('',(1.999289622745E-12,-9.314404469578E-02));+#2008 = VECTOR('',#2009,1.);+#2009 = DIRECTION('',(1.,0.));+#2010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2011 = ORIENTED_EDGE('',*,*,#2012,.T.);+#2012 = EDGE_CURVE('',#1985,#2013,#2015,.T.);+#2013 = VERTEX_POINT('',#2014);+#2014 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,0.));+#2015 = SURFACE_CURVE('',#2016,(#2020,#2027),.PCURVE_S1.);+#2016 = LINE('',#2017,#2018);+#2017 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,0.));+#2018 = VECTOR('',#2019,1.);+#2019 = DIRECTION('',(0.624695047618,0.780868809392,0.));+#2020 = PCURVE('',#254,#2021);+#2021 = DEFINITIONAL_REPRESENTATION('',(#2022),#2026);+#2022 = LINE('',#2023,#2024);+#2023 = CARTESIAN_POINT('',(-0.150537960581,2.160692661497));+#2024 = VECTOR('',#2025,1.);+#2025 = DIRECTION('',(0.624695047618,0.780868809392));+#2026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2027 = PCURVE('',#2028,#2033);+#2028 = PLANE('',#2029);+#2029 = AXIS2_PLACEMENT_3D('',#2030,#2031,#2032);+#2030 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+ 9.314404469578E-02));+#2031 = DIRECTION('',(-0.780868809392,0.624695047618,0.));+#2032 = DIRECTION('',(0.624695047618,0.780868809392,0.));+#2033 = DEFINITIONAL_REPRESENTATION('',(#2034),#2038);+#2034 = LINE('',#2035,#2036);+#2035 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2036 = VECTOR('',#2037,1.);+#2037 = DIRECTION('',(1.,0.));+#2038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2039 = ORIENTED_EDGE('',*,*,#2040,.F.);+#2040 = EDGE_CURVE('',#2041,#2013,#2043,.T.);+#2041 = VERTEX_POINT('',#2042);+#2042 = CARTESIAN_POINT('',(1.659462039431,4.5,0.));+#2043 = SURFACE_CURVE('',#2044,(#2048,#2055),.PCURVE_S1.);+#2044 = LINE('',#2045,#2046);+#2045 = CARTESIAN_POINT('',(1.659462039431,4.5,0.));+#2046 = VECTOR('',#2047,1.);+#2047 = DIRECTION('',(0.,-1.,0.));+#2048 = PCURVE('',#254,#2049);+#2049 = DEFINITIONAL_REPRESENTATION('',(#2050),#2054);+#2050 = LINE('',#2051,#2052);+#2051 = CARTESIAN_POINT('',(-9.0537960569E-02,2.25));+#2052 = VECTOR('',#2053,1.);+#2053 = DIRECTION('',(0.,-1.));+#2054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2055 = PCURVE('',#2056,#2061);+#2056 = PLANE('',#2057);+#2057 = AXIS2_PLACEMENT_3D('',#2058,#2059,#2060);+#2058 = CARTESIAN_POINT('',(1.659462039431,4.485692661496,+ -6.855955304215E-03));+#2059 = DIRECTION('',(-1.,0.,0.));+#2060 = DIRECTION('',(0.,0.,1.));+#2061 = DEFINITIONAL_REPRESENTATION('',(#2062),#2066);+#2062 = LINE('',#2063,#2064);+#2063 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#2064 = VECTOR('',#2065,1.);+#2065 = DIRECTION('',(0.,-1.));+#2066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2067 = ORIENTED_EDGE('',*,*,#2068,.F.);+#2068 = EDGE_CURVE('',#2069,#2041,#2071,.T.);+#2069 = VERTEX_POINT('',#2070);+#2070 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#2071 = SURFACE_CURVE('',#2072,(#2076,#2083),.PCURVE_S1.);+#2072 = LINE('',#2073,#2074);+#2073 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#2074 = VECTOR('',#2075,1.);+#2075 = DIRECTION('',(1.,0.,0.));+#2076 = PCURVE('',#254,#2077);+#2077 = DEFINITIONAL_REPRESENTATION('',(#2078),#2082);+#2078 = LINE('',#2079,#2080);+#2079 = CARTESIAN_POINT('',(-0.410537960579,2.25));+#2080 = VECTOR('',#2081,1.);+#2081 = DIRECTION('',(1.,0.));+#2082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2083 = PCURVE('',#195,#2084);+#2084 = DEFINITIONAL_REPRESENTATION('',(#2085),#2089);+#2085 = LINE('',#2086,#2087);+#2086 = CARTESIAN_POINT('',(2.160537960579,0.));+#2087 = VECTOR('',#2088,1.);+#2088 = DIRECTION('',(-1.,0.));+#2089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2090 = ORIENTED_EDGE('',*,*,#2091,.T.);+#2091 = EDGE_CURVE('',#2069,#2092,#2094,.T.);+#2092 = VERTEX_POINT('',#2093);+#2093 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,0.));+#2094 = SURFACE_CURVE('',#2095,(#2099,#2106),.PCURVE_S1.);+#2095 = LINE('',#2096,#2097);+#2096 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#2097 = VECTOR('',#2098,1.);+#2098 = DIRECTION('',(0.,-1.,0.));+#2099 = PCURVE('',#254,#2100);+#2100 = DEFINITIONAL_REPRESENTATION('',(#2101),#2105);+#2101 = LINE('',#2102,#2103);+#2102 = CARTESIAN_POINT('',(-0.410537960579,2.25));+#2103 = VECTOR('',#2104,1.);+#2104 = DIRECTION('',(0.,-1.));+#2105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2106 = PCURVE('',#2107,#2112);+#2107 = PLANE('',#2108);+#2108 = AXIS2_PLACEMENT_3D('',#2109,#2110,#2111);+#2109 = CARTESIAN_POINT('',(1.339462039421,4.485692661496,+ 9.314404469578E-02));+#2110 = DIRECTION('',(1.,0.,0.));+#2111 = DIRECTION('',(0.,0.,-1.));+#2112 = DEFINITIONAL_REPRESENTATION('',(#2113),#2117);+#2113 = LINE('',#2114,#2115);+#2114 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#2115 = VECTOR('',#2116,1.);+#2116 = DIRECTION('',(0.,-1.));+#2117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2118 = ORIENTED_EDGE('',*,*,#2119,.T.);+#2119 = EDGE_CURVE('',#2092,#2120,#2122,.T.);+#2120 = VERTEX_POINT('',#2121);+#2121 = CARTESIAN_POINT('',(1.374462039409,4.410692661536,0.));+#2122 = SURFACE_CURVE('',#2123,(#2127,#2134),.PCURVE_S1.);+#2123 = LINE('',#2124,#2125);+#2124 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,0.));+#2125 = VECTOR('',#2126,1.);+#2126 = DIRECTION('',(0.422885465402,-0.906183139962,0.));+#2127 = PCURVE('',#254,#2128);+#2128 = DEFINITIONAL_REPRESENTATION('',(#2129),#2133);+#2129 = LINE('',#2130,#2131);+#2130 = CARTESIAN_POINT('',(-0.410537960579,2.235692661497));+#2131 = VECTOR('',#2132,1.);+#2132 = DIRECTION('',(0.422885465402,-0.906183139962));+#2133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2134 = PCURVE('',#2135,#2140);+#2135 = PLANE('',#2136);+#2136 = AXIS2_PLACEMENT_3D('',#2137,#2138,#2139);+#2137 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+ 9.314404469578E-02));+#2138 = DIRECTION('',(0.906183139962,0.422885465402,0.));+#2139 = DIRECTION('',(0.422885465402,-0.906183139962,0.));+#2140 = DEFINITIONAL_REPRESENTATION('',(#2141),#2145);+#2141 = LINE('',#2142,#2143);+#2142 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2143 = VECTOR('',#2144,1.);+#2144 = DIRECTION('',(1.,0.));+#2145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2146 = ORIENTED_EDGE('',*,*,#2147,.F.);+#2147 = EDGE_CURVE('',#2148,#2120,#2150,.T.);+#2148 = VERTEX_POINT('',#2149);+#2149 = CARTESIAN_POINT('',(1.37446203942,4.010692661411,0.));+#2150 = SURFACE_CURVE('',#2151,(#2155,#2162),.PCURVE_S1.);+#2151 = LINE('',#2152,#2153);+#2152 = CARTESIAN_POINT('',(1.374462039413,4.010692661467,0.));+#2153 = VECTOR('',#2154,1.);+#2154 = DIRECTION('',(-9.090506124061E-12,1.,0.));+#2155 = PCURVE('',#254,#2156);+#2156 = DEFINITIONAL_REPRESENTATION('',(#2157),#2161);+#2157 = LINE('',#2158,#2159);+#2158 = CARTESIAN_POINT('',(-0.375537960587,1.760692661467));+#2159 = VECTOR('',#2160,1.);+#2160 = DIRECTION('',(-9.090506124061E-12,1.));+#2161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2162 = PCURVE('',#2163,#2168);+#2163 = PLANE('',#2164);+#2164 = AXIS2_PLACEMENT_3D('',#2165,#2166,#2167);+#2165 = CARTESIAN_POINT('',(1.374462039409,4.335692661502,+ 9.314404469578E-02));+#2166 = DIRECTION('',(1.,0.,0.));+#2167 = DIRECTION('',(-0.,1.,0.));+#2168 = DEFINITIONAL_REPRESENTATION('',(#2169),#2173);+#2169 = LINE('',#2170,#2171);+#2170 = CARTESIAN_POINT('',(-0.325000000035,-9.314404469578E-02));+#2171 = VECTOR('',#2172,1.);+#2172 = DIRECTION('',(1.,0.));+#2173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2174 = ORIENTED_EDGE('',*,*,#2175,.T.);+#2175 = EDGE_CURVE('',#2148,#2176,#2178,.T.);+#2176 = VERTEX_POINT('',#2177);+#2177 = CARTESIAN_POINT('',(1.12446203942,4.01069266155,0.));+#2178 = SURFACE_CURVE('',#2179,(#2184,#2195),.PCURVE_S1.);+#2179 = CIRCLE('',#2180,0.125);+#2180 = AXIS2_PLACEMENT_3D('',#2181,#2182,#2183);+#2181 = CARTESIAN_POINT('',(1.24946203942,4.010692661494,0.));+#2182 = DIRECTION('',(0.,0.,-1.));+#2183 = DIRECTION('',(1.,-6.629505833189E-10,0.));+#2184 = PCURVE('',#254,#2185);+#2185 = DEFINITIONAL_REPRESENTATION('',(#2186),#2194);+#2186 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2187,#2188,#2189,#2190,+#2191,#2192,#2193),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2187 = CARTESIAN_POINT('',(-0.37553796058,1.760692661411));+#2188 = CARTESIAN_POINT('',(-0.375537960724,1.544186310465));+#2189 = CARTESIAN_POINT('',(-0.563037960652,1.652439486062));+#2190 = CARTESIAN_POINT('',(-0.75053796058,1.76069266166));+#2191 = CARTESIAN_POINT('',(-0.563037960508,1.868945837008));+#2192 = CARTESIAN_POINT('',(-0.375537960436,1.977199012357));+#2193 = CARTESIAN_POINT('',(-0.37553796058,1.760692661411));+#2194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2195 = PCURVE('',#2196,#2201);+#2196 = CYLINDRICAL_SURFACE('',#2197,0.125);+#2197 = AXIS2_PLACEMENT_3D('',#2198,#2199,#2200);+#2198 = CARTESIAN_POINT('',(1.24946203942,4.010692661494,+ 9.314404469578E-02));+#2199 = DIRECTION('',(0.,0.,-1.));+#2200 = DIRECTION('',(-1.,4.548899451297E-12,0.));+#2201 = DEFINITIONAL_REPRESENTATION('',(#2202),#2206);+#2202 = LINE('',#2203,#2204);+#2203 = CARTESIAN_POINT('',(3.141592654248,9.314404469578E-02));+#2204 = VECTOR('',#2205,1.);+#2205 = DIRECTION('',(1.,0.));+#2206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2207 = ORIENTED_EDGE('',*,*,#2208,.F.);+#2208 = EDGE_CURVE('',#2209,#2176,#2211,.T.);+#2209 = VERTEX_POINT('',#2210);+#2210 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,0.));+#2211 = SURFACE_CURVE('',#2212,(#2216,#2223),.PCURVE_S1.);+#2212 = LINE('',#2213,#2214);+#2213 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,0.));+#2214 = VECTOR('',#2215,1.);+#2215 = DIRECTION('',(6.061817714661E-12,-1.,0.));+#2216 = PCURVE('',#254,#2217);+#2217 = DEFINITIONAL_REPRESENTATION('',(#2218),#2222);+#2218 = LINE('',#2219,#2220);+#2219 = CARTESIAN_POINT('',(-0.625537960587,2.160692661499));+#2220 = VECTOR('',#2221,1.);+#2221 = DIRECTION('',(6.061817714661E-12,-1.));+#2222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2223 = PCURVE('',#2224,#2229);+#2224 = PLANE('',#2225);+#2225 = AXIS2_PLACEMENT_3D('',#2226,#2227,#2228);+#2226 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+ 9.314404469578E-02));+#2227 = DIRECTION('',(-1.,0.,0.));+#2228 = DIRECTION('',(0.,-1.,0.));+#2229 = DEFINITIONAL_REPRESENTATION('',(#2230),#2234);+#2230 = LINE('',#2231,#2232);+#2231 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#2232 = VECTOR('',#2233,1.);+#2233 = DIRECTION('',(1.,0.));+#2234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2235 = ORIENTED_EDGE('',*,*,#2236,.F.);+#2236 = EDGE_CURVE('',#2237,#2209,#2239,.T.);+#2237 = VERTEX_POINT('',#2238);+#2238 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,0.));+#2239 = SURFACE_CURVE('',#2240,(#2244,#2251),.PCURVE_S1.);+#2240 = LINE('',#2241,#2242);+#2241 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,0.));+#2242 = VECTOR('',#2243,1.);+#2243 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#2244 = PCURVE('',#254,#2245);+#2245 = DEFINITIONAL_REPRESENTATION('',(#2246),#2250);+#2246 = LINE('',#2247,#2248);+#2247 = CARTESIAN_POINT('',(-0.59053796058,2.235692661496));+#2248 = VECTOR('',#2249,1.);+#2249 = DIRECTION('',(-0.422885465415,-0.906183139956));+#2250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2251 = PCURVE('',#2252,#2257);+#2252 = PLANE('',#2253);+#2253 = AXIS2_PLACEMENT_3D('',#2254,#2255,#2256);+#2254 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+ 9.314404469578E-02));+#2255 = DIRECTION('',(-0.906183139956,0.422885465415,0.));+#2256 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#2257 = DEFINITIONAL_REPRESENTATION('',(#2258),#2262);+#2258 = LINE('',#2259,#2260);+#2259 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#2260 = VECTOR('',#2261,1.);+#2261 = DIRECTION('',(1.,0.));+#2262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2263 = ORIENTED_EDGE('',*,*,#2264,.F.);+#2264 = EDGE_CURVE('',#2265,#2237,#2267,.T.);+#2265 = VERTEX_POINT('',#2266);+#2266 = CARTESIAN_POINT('',(1.15946203942,4.5,0.));+#2267 = SURFACE_CURVE('',#2268,(#2272,#2279),.PCURVE_S1.);+#2268 = LINE('',#2269,#2270);+#2269 = CARTESIAN_POINT('',(1.15946203942,4.5,0.));+#2270 = VECTOR('',#2271,1.);+#2271 = DIRECTION('',(0.,-1.,0.));+#2272 = PCURVE('',#254,#2273);+#2273 = DEFINITIONAL_REPRESENTATION('',(#2274),#2278);+#2274 = LINE('',#2275,#2276);+#2275 = CARTESIAN_POINT('',(-0.59053796058,2.25));+#2276 = VECTOR('',#2277,1.);+#2277 = DIRECTION('',(0.,-1.));+#2278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2279 = PCURVE('',#2280,#2285);+#2280 = PLANE('',#2281);+#2281 = AXIS2_PLACEMENT_3D('',#2282,#2283,#2284);+#2282 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+ -6.855955304216E-03));+#2283 = DIRECTION('',(-1.,0.,0.));+#2284 = DIRECTION('',(0.,0.,1.));+#2285 = DEFINITIONAL_REPRESENTATION('',(#2286),#2290);+#2286 = LINE('',#2287,#2288);+#2287 = CARTESIAN_POINT('',(6.855955304216E-03,1.4307338504E-02));+#2288 = VECTOR('',#2289,1.);+#2289 = DIRECTION('',(0.,-1.));+#2290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2291 = ORIENTED_EDGE('',*,*,#2292,.F.);+#2292 = EDGE_CURVE('',#2293,#2265,#2295,.T.);+#2293 = VERTEX_POINT('',#2294);+#2294 = CARTESIAN_POINT('',(0.,4.5,0.));+#2295 = SURFACE_CURVE('',#2296,(#2300,#2307),.PCURVE_S1.);+#2296 = LINE('',#2297,#2298);+#2297 = CARTESIAN_POINT('',(0.,4.5,0.));+#2298 = VECTOR('',#2299,1.);+#2299 = DIRECTION('',(1.,0.,0.));+#2300 = PCURVE('',#254,#2301);+#2301 = DEFINITIONAL_REPRESENTATION('',(#2302),#2306);+#2302 = LINE('',#2303,#2304);+#2303 = CARTESIAN_POINT('',(-1.75,2.25));+#2304 = VECTOR('',#2305,1.);+#2305 = DIRECTION('',(1.,0.));+#2306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2307 = PCURVE('',#195,#2308);+#2308 = DEFINITIONAL_REPRESENTATION('',(#2309),#2313);+#2309 = LINE('',#2310,#2311);+#2310 = CARTESIAN_POINT('',(3.5,0.));+#2311 = VECTOR('',#2312,1.);+#2312 = DIRECTION('',(-1.,0.));+#2313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2314 = ORIENTED_EDGE('',*,*,#2315,.F.);+#2315 = EDGE_CURVE('',#2316,#2293,#2318,.T.);+#2316 = VERTEX_POINT('',#2317);+#2317 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#2318 = SURFACE_CURVE('',#2319,(#2323,#2330),.PCURVE_S1.);+#2319 = LINE('',#2320,#2321);+#2320 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#2321 = VECTOR('',#2322,1.);+#2322 = DIRECTION('',(0.,1.,0.));+#2323 = PCURVE('',#254,#2324);+#2324 = DEFINITIONAL_REPRESENTATION('',(#2325),#2329);+#2325 = LINE('',#2326,#2327);+#2326 = CARTESIAN_POINT('',(-1.75,1.975943709765));+#2327 = VECTOR('',#2328,1.);+#2328 = DIRECTION('',(0.,1.));+#2329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2330 = PCURVE('',#167,#2331);+#2331 = DEFINITIONAL_REPRESENTATION('',(#2332),#2336);+#2332 = LINE('',#2333,#2334);+#2333 = CARTESIAN_POINT('',(0.274056290235,0.));+#2334 = VECTOR('',#2335,1.);+#2335 = DIRECTION('',(-1.,0.));+#2336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2337 = ORIENTED_EDGE('',*,*,#2338,.T.);+#2338 = EDGE_CURVE('',#2316,#2339,#2341,.T.);+#2339 = VERTEX_POINT('',#2340);+#2340 = CARTESIAN_POINT('',(7.446203941993E-02,4.260692661496,0.));+#2341 = SURFACE_CURVE('',#2342,(#2346,#2353),.PCURVE_S1.);+#2342 = LINE('',#2343,#2344);+#2343 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#2344 = VECTOR('',#2345,1.);+#2345 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#2346 = PCURVE('',#254,#2347);+#2347 = DEFINITIONAL_REPRESENTATION('',(#2348),#2352);+#2348 = LINE('',#2349,#2350);+#2349 = CARTESIAN_POINT('',(-1.75,1.975943709765));+#2350 = VECTOR('',#2351,1.);+#2351 = DIRECTION('',(0.906183139987,0.422885465348));+#2352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2353 = PCURVE('',#2354,#2359);+#2354 = PLANE('',#2355);+#2355 = AXIS2_PLACEMENT_3D('',#2356,#2357,#2358);+#2356 = CARTESIAN_POINT('',(-5.379605796008E-04,4.225692661494,+ 9.314404469578E-02));+#2357 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#2358 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#2359 = DEFINITIONAL_REPRESENTATION('',(#2360),#2364);+#2360 = LINE('',#2361,#2362);+#2361 = CARTESIAN_POINT('',(5.936554721188E-04,9.314404469578E-02));+#2362 = VECTOR('',#2363,1.);+#2363 = DIRECTION('',(1.,0.));+#2364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2365 = ORIENTED_EDGE('',*,*,#2366,.F.);+#2366 = EDGE_CURVE('',#2367,#2339,#2369,.T.);+#2367 = VERTEX_POINT('',#2368);+#2368 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#2369 = SURFACE_CURVE('',#2370,(#2374,#2381),.PCURVE_S1.);+#2370 = LINE('',#2371,#2372);+#2371 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#2372 = VECTOR('',#2373,1.);+#2373 = DIRECTION('',(-1.,0.,0.));+#2374 = PCURVE('',#254,#2375);+#2375 = DEFINITIONAL_REPRESENTATION('',(#2376),#2380);+#2376 = LINE('',#2377,#2378);+#2377 = CARTESIAN_POINT('',(-1.550537960575,2.010692661496));+#2378 = VECTOR('',#2379,1.);+#2379 = DIRECTION('',(-1.,0.));+#2380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2381 = PCURVE('',#2382,#2387);+#2382 = PLANE('',#2383);+#2383 = AXIS2_PLACEMENT_3D('',#2384,#2385,#2386);+#2384 = CARTESIAN_POINT('',(0.149462046017,4.260692661496,+ 9.314404469578E-02));+#2385 = DIRECTION('',(0.,1.,0.));+#2386 = DIRECTION('',(-1.,0.,0.));+#2387 = DEFINITIONAL_REPRESENTATION('',(#2388),#2392);+#2388 = LINE('',#2389,#2390);+#2389 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#2390 = VECTOR('',#2391,1.);+#2391 = DIRECTION('',(1.,0.));+#2392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2393 = ORIENTED_EDGE('',*,*,#2394,.T.);+#2394 = EDGE_CURVE('',#2367,#2395,#2397,.T.);+#2395 = VERTEX_POINT('',#2396);+#2396 = CARTESIAN_POINT('',(0.199462039425,4.385692661494,0.));+#2397 = SURFACE_CURVE('',#2398,(#2402,#2409),.PCURVE_S1.);+#2398 = LINE('',#2399,#2400);+#2399 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#2400 = VECTOR('',#2401,1.);+#2401 = DIRECTION('',(0.,1.,0.));+#2402 = PCURVE('',#254,#2403);+#2403 = DEFINITIONAL_REPRESENTATION('',(#2404),#2408);+#2404 = LINE('',#2405,#2406);+#2405 = CARTESIAN_POINT('',(-1.550537960575,2.010692661496));+#2406 = VECTOR('',#2407,1.);+#2407 = DIRECTION('',(0.,1.));+#2408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2409 = PCURVE('',#2410,#2415);+#2410 = PLANE('',#2411);+#2411 = AXIS2_PLACEMENT_3D('',#2412,#2413,#2414);+#2412 = CARTESIAN_POINT('',(0.199462039425,4.260692661495,+ 9.314404469578E-02));+#2413 = DIRECTION('',(-1.,0.,0.));+#2414 = DIRECTION('',(0.,1.,0.));+#2415 = DEFINITIONAL_REPRESENTATION('',(#2416),#2420);+#2416 = LINE('',#2417,#2418);+#2417 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#2418 = VECTOR('',#2419,1.);+#2419 = DIRECTION('',(1.,0.));+#2420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2421 = ORIENTED_EDGE('',*,*,#2422,.F.);+#2422 = EDGE_CURVE('',#2423,#2395,#2425,.T.);+#2423 = VERTEX_POINT('',#2424);+#2424 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#2425 = SURFACE_CURVE('',#2426,(#2430,#2437),.PCURVE_S1.);+#2426 = LINE('',#2427,#2428);+#2427 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#2428 = VECTOR('',#2429,1.);+#2429 = DIRECTION('',(-1.,0.,0.));+#2430 = PCURVE('',#254,#2431);+#2431 = DEFINITIONAL_REPRESENTATION('',(#2432),#2436);+#2432 = LINE('',#2433,#2434);+#2433 = CARTESIAN_POINT('',(-0.825537960573,2.135692661494));+#2434 = VECTOR('',#2435,1.);+#2435 = DIRECTION('',(-1.,0.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = PCURVE('',#2438,#2443);+#2438 = PLANE('',#2439);+#2439 = AXIS2_PLACEMENT_3D('',#2440,#2441,#2442);+#2440 = CARTESIAN_POINT('',(0.824462039407,4.385692661494,+ 9.314404469578E-02));+#2441 = DIRECTION('',(0.,1.,0.));+#2442 = DIRECTION('',(-1.,0.,0.));+#2443 = DEFINITIONAL_REPRESENTATION('',(#2444),#2448);+#2444 = LINE('',#2445,#2446);+#2445 = CARTESIAN_POINT('',(-0.10000000002,-9.314404469578E-02));+#2446 = VECTOR('',#2447,1.);+#2447 = DIRECTION('',(1.,0.));+#2448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2449 = ORIENTED_EDGE('',*,*,#2450,.T.);+#2450 = EDGE_CURVE('',#2423,#2451,#2453,.T.);+#2451 = VERTEX_POINT('',#2452);+#2452 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,0.));+#2453 = SURFACE_CURVE('',#2454,(#2458,#2465),.PCURVE_S1.);+#2454 = LINE('',#2455,#2456);+#2455 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#2456 = VECTOR('',#2457,1.);+#2457 = DIRECTION('',(0.,-1.,0.));+#2458 = PCURVE('',#254,#2459);+#2459 = DEFINITIONAL_REPRESENTATION('',(#2460),#2464);+#2460 = LINE('',#2461,#2462);+#2461 = CARTESIAN_POINT('',(-0.825537960573,2.135692661494));+#2462 = VECTOR('',#2463,1.);+#2463 = DIRECTION('',(0.,-1.));+#2464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2465 = PCURVE('',#2466,#2471);+#2466 = PLANE('',#2467);+#2467 = AXIS2_PLACEMENT_3D('',#2468,#2469,#2470);+#2468 = CARTESIAN_POINT('',(0.924462039427,3.912894220607,+ 9.314404469578E-02));+#2469 = DIRECTION('',(1.,0.,0.));+#2470 = DIRECTION('',(-0.,1.,0.));+#2471 = DEFINITIONAL_REPRESENTATION('',(#2472),#2476);+#2472 = LINE('',#2473,#2474);+#2473 = CARTESIAN_POINT('',(0.472798440887,-9.314404469578E-02));+#2474 = VECTOR('',#2475,1.);+#2475 = DIRECTION('',(-1.,0.));+#2476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2477 = ORIENTED_EDGE('',*,*,#2478,.T.);+#2478 = EDGE_CURVE('',#2451,#2479,#2481,.T.);+#2479 = VERTEX_POINT('',#2480);+#2480 = CARTESIAN_POINT('',(0.724462039428,4.010692661499,0.));+#2481 = SURFACE_CURVE('',#2482,(#2486,#2493),.PCURVE_S1.);+#2482 = LINE('',#2483,#2484);+#2483 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,0.));+#2484 = VECTOR('',#2485,1.);+#2485 = DIRECTION('',(-0.707106781195,-0.707106781178,0.));+#2486 = PCURVE('',#254,#2487);+#2487 = DEFINITIONAL_REPRESENTATION('',(#2488),#2492);+#2488 = LINE('',#2489,#2490);+#2489 = CARTESIAN_POINT('',(-0.825537960573,1.960692661494));+#2490 = VECTOR('',#2491,1.);+#2491 = DIRECTION('',(-0.707106781195,-0.707106781178));+#2492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2493 = PCURVE('',#2494,#2499);+#2494 = PLANE('',#2495);+#2495 = AXIS2_PLACEMENT_3D('',#2496,#2497,#2498);+#2496 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+ 9.314404469578E-02));+#2497 = DIRECTION('',(0.707106781178,-0.707106781195,0.));+#2498 = DIRECTION('',(-0.707106781195,-0.707106781178,0.));+#2499 = DEFINITIONAL_REPRESENTATION('',(#2500),#2504);+#2500 = LINE('',#2501,#2502);+#2501 = CARTESIAN_POINT('',(-0.,9.314404469578E-02));+#2502 = VECTOR('',#2503,1.);+#2503 = DIRECTION('',(1.,0.));+#2504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2505 = ORIENTED_EDGE('',*,*,#2506,.F.);+#2506 = EDGE_CURVE('',#2507,#2479,#2509,.T.);+#2507 = VERTEX_POINT('',#2508);+#2508 = CARTESIAN_POINT('',(7.446204602042E-02,4.010692661499,0.));+#2509 = SURFACE_CURVE('',#2510,(#2514,#2521),.PCURVE_S1.);+#2510 = LINE('',#2511,#2512);+#2511 = CARTESIAN_POINT('',(7.446204602042E-02,4.010692661499,0.));+#2512 = VECTOR('',#2513,1.);+#2513 = DIRECTION('',(1.,0.,0.));+#2514 = PCURVE('',#254,#2515);+#2515 = DEFINITIONAL_REPRESENTATION('',(#2516),#2520);+#2516 = LINE('',#2517,#2518);+#2517 = CARTESIAN_POINT('',(-1.67553795398,1.760692661499));+#2518 = VECTOR('',#2519,1.);+#2519 = DIRECTION('',(1.,0.));+#2520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2521 = PCURVE('',#2522,#2527);+#2522 = PLANE('',#2523);+#2523 = AXIS2_PLACEMENT_3D('',#2524,#2525,#2526);+#2524 = CARTESIAN_POINT('',(7.446204602042E-02,4.010692661499,+ 9.314404469578E-02));+#2525 = DIRECTION('',(0.,-1.,0.));+#2526 = DIRECTION('',(1.,0.,0.));+#2527 = DEFINITIONAL_REPRESENTATION('',(#2528),#2532);+#2528 = LINE('',#2529,#2530);+#2529 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#2530 = VECTOR('',#2531,1.);+#2531 = DIRECTION('',(1.,0.));+#2532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2533 = ORIENTED_EDGE('',*,*,#2534,.F.);+#2534 = EDGE_CURVE('',#2535,#2507,#2537,.T.);+#2535 = VERTEX_POINT('',#2536);+#2536 = CARTESIAN_POINT('',(0.,4.04544161631,0.));+#2537 = SURFACE_CURVE('',#2538,(#2542,#2549),.PCURVE_S1.);+#2538 = LINE('',#2539,#2540);+#2539 = CARTESIAN_POINT('',(0.,4.04544161631,0.));+#2540 = VECTOR('',#2541,1.);+#2541 = DIRECTION('',(0.90618313999,-0.422885465343,0.));+#2542 = PCURVE('',#254,#2543);+#2543 = DEFINITIONAL_REPRESENTATION('',(#2544),#2548);+#2544 = LINE('',#2545,#2546);+#2545 = CARTESIAN_POINT('',(-1.75,1.79544161631));+#2546 = VECTOR('',#2547,1.);+#2547 = DIRECTION('',(0.90618313999,-0.422885465343));+#2548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2549 = PCURVE('',#2550,#2555);+#2550 = PLANE('',#2551);+#2551 = AXIS2_PLACEMENT_3D('',#2552,#2553,#2554);+#2552 = CARTESIAN_POINT('',(-5.379605796011E-04,4.045692664581,+ 9.314404469578E-02));+#2553 = DIRECTION('',(-0.422885465343,-0.90618313999,0.));+#2554 = DIRECTION('',(0.90618313999,-0.422885465343,0.));+#2555 = DEFINITIONAL_REPRESENTATION('',(#2556),#2560);+#2556 = LINE('',#2557,#2558);+#2557 = CARTESIAN_POINT('',(5.936554721189E-04,-9.314404469578E-02));+#2558 = VECTOR('',#2559,1.);+#2559 = DIRECTION('',(1.,0.));+#2560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2561 = ORIENTED_EDGE('',*,*,#2562,.F.);+#2562 = EDGE_CURVE('',#2563,#2535,#2565,.T.);+#2563 = VERTEX_POINT('',#2564);+#2564 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#2565 = SURFACE_CURVE('',#2566,(#2570,#2577),.PCURVE_S1.);+#2566 = LINE('',#2567,#2568);+#2567 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#2568 = VECTOR('',#2569,1.);+#2569 = DIRECTION('',(0.,1.,0.));+#2570 = PCURVE('',#254,#2571);+#2571 = DEFINITIONAL_REPRESENTATION('',(#2572),#2576);+#2572 = LINE('',#2573,#2574);+#2573 = CARTESIAN_POINT('',(-1.75,1.225943712833));+#2574 = VECTOR('',#2575,1.);+#2575 = DIRECTION('',(0.,1.));+#2576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2577 = PCURVE('',#167,#2578);+#2578 = DEFINITIONAL_REPRESENTATION('',(#2579),#2583);+#2579 = LINE('',#2580,#2581);+#2580 = CARTESIAN_POINT('',(1.024056287167,0.));+#2581 = VECTOR('',#2582,1.);+#2582 = DIRECTION('',(-1.,0.));+#2583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2584 = ORIENTED_EDGE('',*,*,#2585,.T.);+#2585 = EDGE_CURVE('',#2563,#2586,#2588,.T.);+#2586 = VERTEX_POINT('',#2587);+#2587 = CARTESIAN_POINT('',(7.446203942479E-02,3.510692661498,0.));+#2588 = SURFACE_CURVE('',#2589,(#2593,#2600),.PCURVE_S1.);+#2589 = LINE('',#2590,#2591);+#2590 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#2591 = VECTOR('',#2592,1.);+#2592 = DIRECTION('',(0.906183154297,0.422885434685,0.));+#2593 = PCURVE('',#254,#2594);+#2594 = DEFINITIONAL_REPRESENTATION('',(#2595),#2599);+#2595 = LINE('',#2596,#2597);+#2596 = CARTESIAN_POINT('',(-1.75,1.225943712833));+#2597 = VECTOR('',#2598,1.);+#2598 = DIRECTION('',(0.906183154297,0.422885434685));+#2599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2600 = PCURVE('',#2601,#2606);+#2601 = PLANE('',#2602);+#2602 = AXIS2_PLACEMENT_3D('',#2603,#2604,#2605);+#2603 = CARTESIAN_POINT('',(-5.379672007239E-04,3.475692661494,+ 9.314404469578E-02));+#2604 = DIRECTION('',(-0.422885434685,0.906183154297,0.));+#2605 = DIRECTION('',(0.906183154297,0.422885434685,0.));+#2606 = DEFINITIONAL_REPRESENTATION('',(#2607),#2611);+#2607 = LINE('',#2608,#2609);+#2608 = CARTESIAN_POINT('',(5.936627694815E-04,9.314404469578E-02));+#2609 = VECTOR('',#2610,1.);+#2610 = DIRECTION('',(1.,0.));+#2611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2612 = ORIENTED_EDGE('',*,*,#2613,.F.);+#2613 = EDGE_CURVE('',#2614,#2586,#2616,.T.);+#2614 = VERTEX_POINT('',#2615);+#2615 = CARTESIAN_POINT('',(0.774462032809,3.510692661495,0.));+#2616 = SURFACE_CURVE('',#2617,(#2621,#2628),.PCURVE_S1.);+#2617 = LINE('',#2618,#2619);+#2618 = CARTESIAN_POINT('',(0.774462032823,3.510692661497,0.));+#2619 = VECTOR('',#2620,1.);+#2620 = DIRECTION('',(-1.,1.30054698397E-12,0.));+#2621 = PCURVE('',#254,#2622);+#2622 = DEFINITIONAL_REPRESENTATION('',(#2623),#2627);+#2623 = LINE('',#2624,#2625);+#2624 = CARTESIAN_POINT('',(-0.975537967177,1.260692661497));+#2625 = VECTOR('',#2626,1.);+#2626 = DIRECTION('',(-1.,1.30054698397E-12));+#2627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2628 = PCURVE('',#2629,#2634);+#2629 = PLANE('',#2630);+#2630 = AXIS2_PLACEMENT_3D('',#2631,#2632,#2633);+#2631 = CARTESIAN_POINT('',(0.149462039396,3.510692661498,+ 9.314404469578E-02));+#2632 = DIRECTION('',(0.,1.,0.));+#2633 = DIRECTION('',(-1.,0.,0.));+#2634 = DEFINITIONAL_REPRESENTATION('',(#2635),#2639);+#2635 = LINE('',#2636,#2637);+#2636 = CARTESIAN_POINT('',(-0.624999993427,-9.314404469578E-02));+#2637 = VECTOR('',#2638,1.);+#2638 = DIRECTION('',(1.,0.));+#2639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2640 = ORIENTED_EDGE('',*,*,#2641,.T.);+#2641 = EDGE_CURVE('',#2614,#2642,#2644,.T.);+#2642 = VERTEX_POINT('',#2643);+#2643 = CARTESIAN_POINT('',(0.774462032809,3.260692661495,0.));+#2644 = SURFACE_CURVE('',#2645,(#2650,#2661),.PCURVE_S1.);+#2645 = CIRCLE('',#2646,0.125);+#2646 = AXIS2_PLACEMENT_3D('',#2647,#2648,#2649);+#2647 = CARTESIAN_POINT('',(0.77446203283,3.385692661495,0.));+#2648 = DIRECTION('',(0.,0.,-1.));+#2649 = DIRECTION('',(-1.6587797802E-10,1.,0.));+#2650 = PCURVE('',#254,#2651);+#2651 = DEFINITIONAL_REPRESENTATION('',(#2652),#2660);+#2652 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2653,#2654,#2655,#2656,+#2657,#2658,#2659),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2653 = CARTESIAN_POINT('',(-0.975537967191,1.260692661495));+#2654 = CARTESIAN_POINT('',(-0.759031616245,1.260692661531));+#2655 = CARTESIAN_POINT('',(-0.867284791687,1.073192661513));+#2656 = CARTESIAN_POINT('',(-0.975537967129,0.885692661495));+#2657 = CARTESIAN_POINT('',(-1.083791142633,1.073192661477));+#2658 = CARTESIAN_POINT('',(-1.192044318137,1.260692661459));+#2659 = CARTESIAN_POINT('',(-0.975537967191,1.260692661495));+#2660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2661 = PCURVE('',#2662,#2667);+#2662 = CYLINDRICAL_SURFACE('',#2663,0.125);+#2663 = AXIS2_PLACEMENT_3D('',#2664,#2665,#2666);+#2664 = CARTESIAN_POINT('',(0.77446203283,3.385692661495,+ 9.314404469578E-02));+#2665 = DIRECTION('',(0.,0.,-1.));+#2666 = DIRECTION('',(0.,1.,0.));+#2667 = DEFINITIONAL_REPRESENTATION('',(#2668),#2672);+#2668 = LINE('',#2669,#2670);+#2669 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2670 = VECTOR('',#2671,1.);+#2671 = DIRECTION('',(1.,0.));+#2672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2673 = ORIENTED_EDGE('',*,*,#2674,.F.);+#2674 = EDGE_CURVE('',#2675,#2642,#2677,.T.);+#2675 = VERTEX_POINT('',#2676);+#2676 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,0.));+#2677 = SURFACE_CURVE('',#2678,(#2682,#2689),.PCURVE_S1.);+#2678 = LINE('',#2679,#2680);+#2679 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,0.));+#2680 = VECTOR('',#2681,1.);+#2681 = DIRECTION('',(1.,1.297374918141E-12,0.));+#2682 = PCURVE('',#254,#2683);+#2683 = DEFINITIONAL_REPRESENTATION('',(#2684),#2688);+#2684 = LINE('',#2685,#2686);+#2685 = CARTESIAN_POINT('',(-1.675537960583,1.010692661492));+#2686 = VECTOR('',#2687,1.);+#2687 = DIRECTION('',(1.,1.297374918141E-12));+#2688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2689 = PCURVE('',#2690,#2695);+#2690 = PLANE('',#2691);+#2691 = AXIS2_PLACEMENT_3D('',#2692,#2693,#2694);+#2692 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+ 9.314404469578E-02));+#2693 = DIRECTION('',(0.,-1.,0.));+#2694 = DIRECTION('',(1.,0.,0.));+#2695 = DEFINITIONAL_REPRESENTATION('',(#2696),#2700);+#2696 = LINE('',#2697,#2698);+#2697 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#2698 = VECTOR('',#2699,1.);+#2699 = DIRECTION('',(1.,0.));+#2700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2701 = ORIENTED_EDGE('',*,*,#2702,.F.);+#2702 = EDGE_CURVE('',#2703,#2675,#2705,.T.);+#2703 = VERTEX_POINT('',#2704);+#2704 = CARTESIAN_POINT('',(0.,3.295441613229,0.));+#2705 = SURFACE_CURVE('',#2706,(#2710,#2717),.PCURVE_S1.);+#2706 = LINE('',#2707,#2708);+#2707 = CARTESIAN_POINT('',(0.,3.295441613229,0.));+#2708 = VECTOR('',#2709,1.);+#2709 = DIRECTION('',(0.906183139956,-0.422885465415,0.));+#2710 = PCURVE('',#254,#2711);+#2711 = DEFINITIONAL_REPRESENTATION('',(#2712),#2716);+#2712 = LINE('',#2713,#2714);+#2713 = CARTESIAN_POINT('',(-1.75,1.045441613229));+#2714 = VECTOR('',#2715,1.);+#2715 = DIRECTION('',(0.906183139956,-0.422885465415));+#2716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2717 = PCURVE('',#2718,#2723);+#2718 = PLANE('',#2719);+#2719 = AXIS2_PLACEMENT_3D('',#2720,#2721,#2722);+#2720 = CARTESIAN_POINT('',(-5.379605796021E-04,3.295692661499,+ 9.314404469578E-02));+#2721 = DIRECTION('',(-0.422885465415,-0.906183139956,0.));+#2722 = DIRECTION('',(0.906183139956,-0.422885465415,0.));+#2723 = DEFINITIONAL_REPRESENTATION('',(#2724),#2728);+#2724 = LINE('',#2725,#2726);+#2725 = CARTESIAN_POINT('',(5.936554716971E-04,-9.314404469578E-02));+#2726 = VECTOR('',#2727,1.);+#2727 = DIRECTION('',(1.,0.));+#2728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2729 = ORIENTED_EDGE('',*,*,#2730,.F.);+#2730 = EDGE_CURVE('',#2731,#2703,#2733,.T.);+#2731 = VERTEX_POINT('',#2732);+#2732 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#2733 = SURFACE_CURVE('',#2734,(#2738,#2745),.PCURVE_S1.);+#2734 = LINE('',#2735,#2736);+#2735 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#2736 = VECTOR('',#2737,1.);+#2737 = DIRECTION('',(0.,1.,0.));+#2738 = PCURVE('',#254,#2739);+#2739 = DEFINITIONAL_REPRESENTATION('',(#2740),#2744);+#2740 = LINE('',#2741,#2742);+#2741 = CARTESIAN_POINT('',(-1.75,0.725943712833));+#2742 = VECTOR('',#2743,1.);+#2743 = DIRECTION('',(0.,1.));+#2744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2745 = PCURVE('',#167,#2746);+#2746 = DEFINITIONAL_REPRESENTATION('',(#2747),#2751);+#2747 = LINE('',#2748,#2749);+#2748 = CARTESIAN_POINT('',(1.524056287167,0.));+#2749 = VECTOR('',#2750,1.);+#2750 = DIRECTION('',(-1.,0.));+#2751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2752 = ORIENTED_EDGE('',*,*,#2753,.T.);+#2753 = EDGE_CURVE('',#2731,#2754,#2756,.T.);+#2754 = VERTEX_POINT('',#2755);+#2755 = CARTESIAN_POINT('',(7.446203941993E-02,3.010692661496,0.));+#2756 = SURFACE_CURVE('',#2757,(#2761,#2768),.PCURVE_S1.);+#2757 = LINE('',#2758,#2759);+#2758 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#2759 = VECTOR('',#2760,1.);+#2760 = DIRECTION('',(0.906183154294,0.422885434691,0.));+#2761 = PCURVE('',#254,#2762);+#2762 = DEFINITIONAL_REPRESENTATION('',(#2763),#2767);+#2763 = LINE('',#2764,#2765);+#2764 = CARTESIAN_POINT('',(-1.75,0.725943712833));+#2765 = VECTOR('',#2766,1.);+#2766 = DIRECTION('',(0.906183154294,0.422885434691));+#2767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2768 = PCURVE('',#2769,#2774);+#2769 = PLANE('',#2770);+#2770 = AXIS2_PLACEMENT_3D('',#2771,#2772,#2773);+#2771 = CARTESIAN_POINT('',(-5.379672007246E-04,2.975692661494,+ 9.314404469578E-02));+#2772 = DIRECTION('',(-0.422885434691,0.906183154294,0.));+#2773 = DIRECTION('',(0.906183154294,0.422885434691,0.));+#2774 = DEFINITIONAL_REPRESENTATION('',(#2775),#2779);+#2775 = LINE('',#2776,#2777);+#2776 = CARTESIAN_POINT('',(5.936627694821E-04,9.314404469578E-02));+#2777 = VECTOR('',#2778,1.);+#2778 = DIRECTION('',(1.,0.));+#2779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2780 = ORIENTED_EDGE('',*,*,#2781,.F.);+#2781 = EDGE_CURVE('',#2782,#2754,#2784,.T.);+#2782 = VERTEX_POINT('',#2783);+#2783 = CARTESIAN_POINT('',(0.774462032822,3.010692661495,0.));+#2784 = SURFACE_CURVE('',#2785,(#2789,#2796),.PCURVE_S1.);+#2785 = LINE('',#2786,#2787);+#2786 = CARTESIAN_POINT('',(0.774462032827,3.010692661495,0.));+#2787 = VECTOR('',#2788,1.);+#2788 = DIRECTION('',(-1.,4.865948959471E-13,0.));+#2789 = PCURVE('',#254,#2790);+#2790 = DEFINITIONAL_REPRESENTATION('',(#2791),#2795);+#2791 = LINE('',#2792,#2793);+#2792 = CARTESIAN_POINT('',(-0.975537967173,0.760692661495));+#2793 = VECTOR('',#2794,1.);+#2794 = DIRECTION('',(-1.,4.865948959471E-13));+#2795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2796 = PCURVE('',#2797,#2802);+#2797 = PLANE('',#2798);+#2798 = AXIS2_PLACEMENT_3D('',#2799,#2800,#2801);+#2799 = CARTESIAN_POINT('',(0.149462039396,3.010692661496,+ 9.314404469578E-02));+#2800 = DIRECTION('',(0.,1.,0.));+#2801 = DIRECTION('',(-1.,0.,0.));+#2802 = DEFINITIONAL_REPRESENTATION('',(#2803),#2807);+#2803 = LINE('',#2804,#2805);+#2804 = CARTESIAN_POINT('',(-0.624999993431,-9.314404469578E-02));+#2805 = VECTOR('',#2806,1.);+#2806 = DIRECTION('',(1.,0.));+#2807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2808 = ORIENTED_EDGE('',*,*,#2809,.T.);+#2809 = EDGE_CURVE('',#2782,#2810,#2812,.T.);+#2810 = VERTEX_POINT('',#2811);+#2811 = CARTESIAN_POINT('',(0.774462032865,2.760692661495,0.));+#2812 = SURFACE_CURVE('',#2813,(#2818,#2829),.PCURVE_S1.);+#2813 = CIRCLE('',#2814,0.125);+#2814 = AXIS2_PLACEMENT_3D('',#2815,#2816,#2817);+#2815 = CARTESIAN_POINT('',(0.77446203283,2.885692661495,0.));+#2816 = DIRECTION('',(0.,0.,-1.));+#2817 = DIRECTION('',(-6.199041280297E-11,1.,0.));+#2818 = PCURVE('',#254,#2819);+#2819 = DEFINITIONAL_REPRESENTATION('',(#2820),#2828);+#2820 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2821,#2822,#2823,#2824,+#2825,#2826,#2827),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2821 = CARTESIAN_POINT('',(-0.975537967178,0.760692661495));+#2822 = CARTESIAN_POINT('',(-0.759031616232,0.760692661508));+#2823 = CARTESIAN_POINT('',(-0.867284791693,0.573192661502));+#2824 = CARTESIAN_POINT('',(-0.975537967155,0.385692661495));+#2825 = CARTESIAN_POINT('',(-1.083791142639,0.573192661488));+#2826 = CARTESIAN_POINT('',(-1.192044318124,0.760692661482));+#2827 = CARTESIAN_POINT('',(-0.975537967178,0.760692661495));+#2828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2829 = PCURVE('',#2830,#2835);+#2830 = CYLINDRICAL_SURFACE('',#2831,0.125);+#2831 = AXIS2_PLACEMENT_3D('',#2832,#2833,#2834);+#2832 = CARTESIAN_POINT('',(0.77446203283,2.885692661495,+ 9.314404469578E-02));+#2833 = DIRECTION('',(0.,0.,-1.));+#2834 = DIRECTION('',(0.,1.,0.));+#2835 = DEFINITIONAL_REPRESENTATION('',(#2836),#2840);+#2836 = LINE('',#2837,#2838);+#2837 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#2838 = VECTOR('',#2839,1.);+#2839 = DIRECTION('',(1.,0.));+#2840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2841 = ORIENTED_EDGE('',*,*,#2842,.F.);+#2842 = EDGE_CURVE('',#2843,#2810,#2845,.T.);+#2843 = VERTEX_POINT('',#2844);+#2844 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,0.));+#2845 = SURFACE_CURVE('',#2846,(#2850,#2857),.PCURVE_S1.);+#2846 = LINE('',#2847,#2848);+#2847 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,0.));+#2848 = VECTOR('',#2849,1.);+#2849 = DIRECTION('',(1.,-2.220446070109E-12,0.));+#2850 = PCURVE('',#254,#2851);+#2851 = DEFINITIONAL_REPRESENTATION('',(#2852),#2856);+#2852 = LINE('',#2853,#2854);+#2853 = CARTESIAN_POINT('',(-1.675537960583,0.510692661499));+#2854 = VECTOR('',#2855,1.);+#2855 = DIRECTION('',(1.,-2.220446070109E-12));+#2856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2857 = PCURVE('',#2858,#2863);+#2858 = PLANE('',#2859);+#2859 = AXIS2_PLACEMENT_3D('',#2860,#2861,#2862);+#2860 = CARTESIAN_POINT('',(7.446203941749E-02,2.760692661499,+ 9.314404469578E-02));+#2861 = DIRECTION('',(0.,-1.,0.));+#2862 = DIRECTION('',(1.,0.,0.));+#2863 = DEFINITIONAL_REPRESENTATION('',(#2864),#2868);+#2864 = LINE('',#2865,#2866);+#2865 = CARTESIAN_POINT('',(-9.992007221626E-15,-9.314404469578E-02));+#2866 = VECTOR('',#2867,1.);+#2867 = DIRECTION('',(1.,0.));+#2868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2869 = ORIENTED_EDGE('',*,*,#2870,.F.);+#2870 = EDGE_CURVE('',#2871,#2843,#2873,.T.);+#2871 = VERTEX_POINT('',#2872);+#2872 = CARTESIAN_POINT('',(0.,2.795441613227,0.));+#2873 = SURFACE_CURVE('',#2874,(#2878,#2885),.PCURVE_S1.);+#2874 = LINE('',#2875,#2876);+#2875 = CARTESIAN_POINT('',(0.,2.795441613227,0.));+#2876 = VECTOR('',#2877,1.);+#2877 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#2878 = PCURVE('',#254,#2879);+#2879 = DEFINITIONAL_REPRESENTATION('',(#2880),#2884);+#2880 = LINE('',#2881,#2882);+#2881 = CARTESIAN_POINT('',(-1.75,0.545441613227));+#2882 = VECTOR('',#2883,1.);+#2883 = DIRECTION('',(0.906183139998,-0.422885465325));+#2884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2885 = PCURVE('',#2886,#2891);+#2886 = PLANE('',#2887);+#2887 = AXIS2_PLACEMENT_3D('',#2888,#2889,#2890);+#2888 = CARTESIAN_POINT('',(-5.379605796028E-04,2.795692661497,+ 9.314404469578E-02));+#2889 = DIRECTION('',(-0.422885465325,-0.906183139998,0.));+#2890 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#2891 = DEFINITIONAL_REPRESENTATION('',(#2892),#2896);+#2892 = LINE('',#2893,#2894);+#2893 = CARTESIAN_POINT('',(5.936554716977E-04,-9.314404469578E-02));+#2894 = VECTOR('',#2895,1.);+#2895 = DIRECTION('',(1.,0.));+#2896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2897 = ORIENTED_EDGE('',*,*,#2898,.F.);+#2898 = EDGE_CURVE('',#2899,#2871,#2901,.T.);+#2899 = VERTEX_POINT('',#2900);+#2900 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#2901 = SURFACE_CURVE('',#2902,(#2906,#2913),.PCURVE_S1.);+#2902 = LINE('',#2903,#2904);+#2903 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#2904 = VECTOR('',#2905,1.);+#2905 = DIRECTION('',(0.,1.,0.));+#2906 = PCURVE('',#254,#2907);+#2907 = DEFINITIONAL_REPRESENTATION('',(#2908),#2912);+#2908 = LINE('',#2909,#2910);+#2909 = CARTESIAN_POINT('',(-1.75,-0.224056290231));+#2910 = VECTOR('',#2911,1.);+#2911 = DIRECTION('',(0.,1.));+#2912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2913 = PCURVE('',#167,#2914);+#2914 = DEFINITIONAL_REPRESENTATION('',(#2915),#2919);+#2915 = LINE('',#2916,#2917);+#2916 = CARTESIAN_POINT('',(2.474056290231,0.));+#2917 = VECTOR('',#2918,1.);+#2918 = DIRECTION('',(-1.,0.));+#2919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2920 = ORIENTED_EDGE('',*,*,#2921,.T.);+#2921 = EDGE_CURVE('',#2899,#2922,#2924,.T.);+#2922 = VERTEX_POINT('',#2923);+#2923 = CARTESIAN_POINT('',(7.446203942601E-02,2.060692661502,0.));+#2924 = SURFACE_CURVE('',#2925,(#2929,#2936),.PCURVE_S1.);+#2925 = LINE('',#2926,#2927);+#2926 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#2927 = VECTOR('',#2928,1.);+#2928 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#2929 = PCURVE('',#254,#2930);+#2930 = DEFINITIONAL_REPRESENTATION('',(#2931),#2935);+#2931 = LINE('',#2932,#2933);+#2932 = CARTESIAN_POINT('',(-1.75,-0.224056290231));+#2933 = VECTOR('',#2934,1.);+#2934 = DIRECTION('',(0.90618313999,0.422885465342));+#2935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2936 = PCURVE('',#2937,#2942);+#2937 = PLANE('',#2938);+#2938 = AXIS2_PLACEMENT_3D('',#2939,#2940,#2941);+#2939 = CARTESIAN_POINT('',(-5.379605796039E-04,2.025692661499,+ 9.314404469578E-02));+#2940 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#2941 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#2942 = DEFINITIONAL_REPRESENTATION('',(#2943),#2947);+#2943 = LINE('',#2944,#2945);+#2944 = CARTESIAN_POINT('',(5.936554716987E-04,9.314404469578E-02));+#2945 = VECTOR('',#2946,1.);+#2946 = DIRECTION('',(1.,0.));+#2947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2948 = ORIENTED_EDGE('',*,*,#2949,.F.);+#2949 = EDGE_CURVE('',#2950,#2922,#2952,.T.);+#2950 = VERTEX_POINT('',#2951);+#2951 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#2952 = SURFACE_CURVE('',#2953,(#2957,#2964),.PCURVE_S1.);+#2953 = LINE('',#2954,#2955);+#2954 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#2955 = VECTOR('',#2956,1.);+#2956 = DIRECTION('',(-1.,0.,0.));+#2957 = PCURVE('',#254,#2958);+#2958 = DEFINITIONAL_REPRESENTATION('',(#2959),#2963);+#2959 = LINE('',#2960,#2961);+#2960 = CARTESIAN_POINT('',(-1.550537960575,-0.189307338498));+#2961 = VECTOR('',#2962,1.);+#2962 = DIRECTION('',(-1.,0.));+#2963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2964 = PCURVE('',#2965,#2970);+#2965 = PLANE('',#2966);+#2966 = AXIS2_PLACEMENT_3D('',#2967,#2968,#2969);+#2967 = CARTESIAN_POINT('',(0.149462046017,2.060692661502,+ 9.314404469578E-02));+#2968 = DIRECTION('',(0.,1.,0.));+#2969 = DIRECTION('',(-1.,0.,0.));+#2970 = DEFINITIONAL_REPRESENTATION('',(#2971),#2975);+#2971 = LINE('',#2972,#2973);+#2972 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#2973 = VECTOR('',#2974,1.);+#2974 = DIRECTION('',(1.,0.));+#2975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2976 = ORIENTED_EDGE('',*,*,#2977,.T.);+#2977 = EDGE_CURVE('',#2950,#2978,#2980,.T.);+#2978 = VERTEX_POINT('',#2979);+#2979 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,0.));+#2980 = SURFACE_CURVE('',#2981,(#2985,#2992),.PCURVE_S1.);+#2981 = LINE('',#2982,#2983);+#2982 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#2983 = VECTOR('',#2984,1.);+#2984 = DIRECTION('',(2.026727863384E-04,0.999999979462,0.));+#2985 = PCURVE('',#254,#2986);+#2986 = DEFINITIONAL_REPRESENTATION('',(#2987),#2991);+#2987 = LINE('',#2988,#2989);+#2988 = CARTESIAN_POINT('',(-1.550537960575,-0.189307338498));+#2989 = VECTOR('',#2990,1.);+#2990 = DIRECTION('',(2.026727863384E-04,0.999999979462));+#2991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2992 = PCURVE('',#2993,#2998);+#2993 = PLANE('',#2994);+#2994 = AXIS2_PLACEMENT_3D('',#2995,#2996,#2997);+#2995 = CARTESIAN_POINT('',(0.199462039425,2.060692661499,+ 9.314404469578E-02));+#2996 = DIRECTION('',(-0.999999979462,2.026727863386E-04,0.));+#2997 = DIRECTION('',(2.026727863386E-04,0.999999979462,0.));+#2998 = DEFINITIONAL_REPRESENTATION('',(#2999),#3003);+#2999 = LINE('',#3000,#3001);+#3000 = CARTESIAN_POINT('',(2.999822674683E-12,9.314404469578E-02));+#3001 = VECTOR('',#3002,1.);+#3002 = DIRECTION('',(1.,0.));+#3003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3004 = ORIENTED_EDGE('',*,*,#3005,.T.);+#3005 = EDGE_CURVE('',#2978,#3006,#3008,.T.);+#3006 = VERTEX_POINT('',#3007);+#3007 = CARTESIAN_POINT('',(1.199462039275,2.260599510107,0.));+#3008 = SURFACE_CURVE('',#3009,(#3013,#3020),.PCURVE_S1.);+#3009 = LINE('',#3010,#3011);+#3010 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,0.));+#3011 = VECTOR('',#3012,1.);+#3012 = DIRECTION('',(1.,1.178527285084E-11,0.));+#3013 = PCURVE('',#254,#3014);+#3014 = DEFINITIONAL_REPRESENTATION('',(#3015),#3019);+#3015 = LINE('',#3016,#3017);+#3016 = CARTESIAN_POINT('',(-1.550497444896,1.0599510107E-02));+#3017 = VECTOR('',#3018,1.);+#3018 = DIRECTION('',(1.,1.178527285084E-11));+#3019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3020 = PCURVE('',#3021,#3026);+#3021 = PLANE('',#3022);+#3022 = AXIS2_PLACEMENT_3D('',#3023,#3024,#3025);+#3023 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,+ 9.314404469578E-02));+#3024 = DIRECTION('',(-1.762074787874E-11,1.,0.));+#3025 = DIRECTION('',(1.,1.762074787874E-11,0.));+#3026 = DEFINITIONAL_REPRESENTATION('',(#3027),#3031);+#3027 = LINE('',#3028,#3029);+#3028 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3029 = VECTOR('',#3030,1.);+#3030 = DIRECTION('',(1.,0.));+#3031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3032 = ORIENTED_EDGE('',*,*,#3033,.T.);+#3033 = EDGE_CURVE('',#3006,#3034,#3036,.T.);+#3034 = VERTEX_POINT('',#3035);+#3035 = CARTESIAN_POINT('',(1.299462039425,2.16059951006,0.));+#3036 = SURFACE_CURVE('',#3037,(#3042,#3053),.PCURVE_S1.);+#3037 = CIRCLE('',#3038,0.100000000003);+#3038 = AXIS2_PLACEMENT_3D('',#3039,#3040,#3041);+#3039 = CARTESIAN_POINT('',(1.19946203941,2.160599510105,0.));+#3040 = DIRECTION('',(0.,0.,-1.));+#3041 = DIRECTION('',(-1.347362221754E-09,1.,0.));+#3042 = PCURVE('',#254,#3043);+#3043 = DEFINITIONAL_REPRESENTATION('',(#3044),#3052);+#3044 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3045,#3046,#3047,#3048,+#3049,#3050,#3051),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3045 = CARTESIAN_POINT('',(-0.550537960725,1.0599510108E-02));+#3046 = CARTESIAN_POINT('',(-0.377332879963,1.059951034137E-02));+#3047 = CARTESIAN_POINT('',(-0.463935420142,-0.13940048978));+#3048 = CARTESIAN_POINT('',(-0.550537960321,-0.289400489901));+#3049 = CARTESIAN_POINT('',(-0.637140500904,-0.139400490013));+#3050 = CARTESIAN_POINT('',(-0.723743041487,1.059950987463E-02));+#3051 = CARTESIAN_POINT('',(-0.550537960725,1.0599510108E-02));+#3052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3053 = PCURVE('',#3054,#3059);+#3054 = CYLINDRICAL_SURFACE('',#3055,0.100000000003);+#3055 = AXIS2_PLACEMENT_3D('',#3056,#3057,#3058);+#3056 = CARTESIAN_POINT('',(1.19946203941,2.160599510105,+ 9.314404469578E-02));+#3057 = DIRECTION('',(0.,0.,-1.));+#3058 = DIRECTION('',(0.,1.,0.));+#3059 = DEFINITIONAL_REPRESENTATION('',(#3060),#3063);+#3060 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3061,#3062),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.570796328592),.PIECEWISE_BEZIER_KNOTS.);+#3061 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3062 = CARTESIAN_POINT('',(1.570796327245,9.314404469578E-02));+#3063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3064 = ORIENTED_EDGE('',*,*,#3065,.T.);+#3065 = EDGE_CURVE('',#3034,#3066,#3068,.T.);+#3066 = VERTEX_POINT('',#3067);+#3067 = CARTESIAN_POINT('',(1.299462039438,0.310692661498,0.));+#3068 = SURFACE_CURVE('',#3069,(#3073,#3080),.PCURVE_S1.);+#3069 = LINE('',#3070,#3071);+#3070 = CARTESIAN_POINT('',(1.299462039425,2.16059951006,0.));+#3071 = VECTOR('',#3072,1.);+#3072 = DIRECTION('',(4.464401568199E-12,-1.,0.));+#3073 = PCURVE('',#254,#3074);+#3074 = DEFINITIONAL_REPRESENTATION('',(#3075),#3079);+#3075 = LINE('',#3076,#3077);+#3076 = CARTESIAN_POINT('',(-0.450537960575,-8.940048994E-02));+#3077 = VECTOR('',#3078,1.);+#3078 = DIRECTION('',(4.464401568199E-12,-1.));+#3079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3080 = PCURVE('',#3081,#3086);+#3081 = PLANE('',#3082);+#3082 = AXIS2_PLACEMENT_3D('',#3083,#3084,#3085);+#3083 = CARTESIAN_POINT('',(1.299462039431,2.160599510108,+ 9.314404469578E-02));+#3084 = DIRECTION('',(1.,0.,0.));+#3085 = DIRECTION('',(0.,-1.,0.));+#3086 = DEFINITIONAL_REPRESENTATION('',(#3087),#3091);+#3087 = LINE('',#3088,#3089);+#3088 = CARTESIAN_POINT('',(4.800027042506E-11,9.314404469578E-02));+#3089 = VECTOR('',#3090,1.);+#3090 = DIRECTION('',(1.,0.));+#3091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3092 = ORIENTED_EDGE('',*,*,#3093,.T.);+#3093 = EDGE_CURVE('',#3066,#3094,#3096,.T.);+#3094 = VERTEX_POINT('',#3095);+#3095 = CARTESIAN_POINT('',(1.199462039453,0.210692661561,0.));+#3096 = SURFACE_CURVE('',#3097,(#3102,#3113),.PCURVE_S1.);+#3097 = CIRCLE('',#3098,9.999999999127E-02);+#3098 = AXIS2_PLACEMENT_3D('',#3099,#3100,#3101);+#3099 = CARTESIAN_POINT('',(1.199462039447,0.310692661553,0.));+#3100 = DIRECTION('',(0.,0.,-1.));+#3101 = DIRECTION('',(1.,-5.521305635397E-10,0.));+#3102 = PCURVE('',#254,#3103);+#3103 = DEFINITIONAL_REPRESENTATION('',(#3104),#3112);+#3104 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3105,#3106,#3107,#3108,+#3109,#3110,#3111),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3105 = CARTESIAN_POINT('',(-0.450537960562,-1.939307338502));+#3106 = CARTESIAN_POINT('',(-0.450537960657,-2.112512419244));+#3107 = CARTESIAN_POINT('',(-0.600537960596,-2.02590987879));+#3108 = CARTESIAN_POINT('',(-0.750537960536,-1.939307338337));+#3109 = CARTESIAN_POINT('',(-0.600537960501,-1.852704798049));+#3110 = CARTESIAN_POINT('',(-0.450537960466,-1.76610225776));+#3111 = CARTESIAN_POINT('',(-0.450537960562,-1.939307338502));+#3112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3113 = PCURVE('',#3114,#3119);+#3114 = CYLINDRICAL_SURFACE('',#3115,9.999999999127E-02);+#3115 = AXIS2_PLACEMENT_3D('',#3116,#3117,#3118);+#3116 = CARTESIAN_POINT('',(1.199462039447,0.310692661553,+ 9.314404469578E-02));+#3117 = DIRECTION('',(0.,0.,-1.));+#3118 = DIRECTION('',(1.,1.847268519002E-11,0.));+#3119 = DEFINITIONAL_REPRESENTATION('',(#3120),#3124);+#3120 = LINE('',#3121,#3122);+#3121 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3122 = VECTOR('',#3123,1.);+#3123 = DIRECTION('',(1.,0.));+#3124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3125 = ORIENTED_EDGE('',*,*,#3126,.T.);+#3126 = EDGE_CURVE('',#3094,#3127,#3129,.T.);+#3127 = VERTEX_POINT('',#3128);+#3128 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,0.));+#3129 = SURFACE_CURVE('',#3130,(#3134,#3141),.PCURVE_S1.);+#3130 = LINE('',#3131,#3132);+#3131 = CARTESIAN_POINT('',(1.199462039453,0.210692661561,0.));+#3132 = VECTOR('',#3133,1.);+#3133 = DIRECTION('',(-1.,-6.308550903711E-11,0.));+#3134 = PCURVE('',#254,#3135);+#3135 = DEFINITIONAL_REPRESENTATION('',(#3136),#3140);+#3136 = LINE('',#3137,#3138);+#3137 = CARTESIAN_POINT('',(-0.550537960547,-2.039307338439));+#3138 = VECTOR('',#3139,1.);+#3139 = DIRECTION('',(-1.,-6.308550903711E-11));+#3140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3141 = PCURVE('',#3142,#3147);+#3142 = PLANE('',#3143);+#3143 = AXIS2_PLACEMENT_3D('',#3144,#3145,#3146);+#3144 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+ 9.314404469578E-02));+#3145 = DIRECTION('',(6.309476899257E-11,-1.,0.));+#3146 = DIRECTION('',(-1.,-6.309476899257E-11,0.));+#3147 = DEFINITIONAL_REPRESENTATION('',(#3148),#3152);+#3148 = LINE('',#3149,#3150);+#3149 = CARTESIAN_POINT('',(-2.500000206851E-11,9.314404469578E-02));+#3150 = VECTOR('',#3151,1.);+#3151 = DIRECTION('',(1.,0.));+#3152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3153 = ORIENTED_EDGE('',*,*,#3154,.T.);+#3154 = EDGE_CURVE('',#3127,#3155,#3157,.T.);+#3155 = VERTEX_POINT('',#3156);+#3156 = CARTESIAN_POINT('',(0.199462039425,0.310692661501,0.));+#3157 = SURFACE_CURVE('',#3158,(#3162,#3169),.PCURVE_S1.);+#3158 = LINE('',#3159,#3160);+#3159 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,0.));+#3160 = VECTOR('',#3161,1.);+#3161 = DIRECTION('',(0.,1.,0.));+#3162 = PCURVE('',#254,#3163);+#3163 = DEFINITIONAL_REPRESENTATION('',(#3164),#3168);+#3164 = LINE('',#3165,#3166);+#3165 = CARTESIAN_POINT('',(-1.550537960575,-2.039307338502));+#3166 = VECTOR('',#3167,1.);+#3167 = DIRECTION('',(0.,1.));+#3168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3169 = PCURVE('',#3170,#3175);+#3170 = PLANE('',#3171);+#3171 = AXIS2_PLACEMENT_3D('',#3172,#3173,#3174);+#3172 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,+ 9.314404469578E-02));+#3173 = DIRECTION('',(-1.,0.,0.));+#3174 = DIRECTION('',(0.,1.,0.));+#3175 = DEFINITIONAL_REPRESENTATION('',(#3176),#3180);+#3176 = LINE('',#3177,#3178);+#3177 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3178 = VECTOR('',#3179,1.);+#3179 = DIRECTION('',(1.,0.));+#3180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3181 = ORIENTED_EDGE('',*,*,#3182,.F.);+#3182 = EDGE_CURVE('',#3183,#3155,#3185,.T.);+#3183 = VERTEX_POINT('',#3184);+#3184 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,0.));+#3185 = SURFACE_CURVE('',#3186,(#3190,#3197),.PCURVE_S1.);+#3186 = LINE('',#3187,#3188);+#3187 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,0.));+#3188 = VECTOR('',#3189,1.);+#3189 = DIRECTION('',(1.,0.,0.));+#3190 = PCURVE('',#254,#3191);+#3191 = DEFINITIONAL_REPRESENTATION('',(#3192),#3196);+#3192 = LINE('',#3193,#3194);+#3193 = CARTESIAN_POINT('',(-1.675537960586,-1.939307338499));+#3194 = VECTOR('',#3195,1.);+#3195 = DIRECTION('',(1.,0.));+#3196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3197 = PCURVE('',#3198,#3203);+#3198 = PLANE('',#3199);+#3199 = AXIS2_PLACEMENT_3D('',#3200,#3201,#3202);+#3200 = CARTESIAN_POINT('',(7.446204602041E-02,0.310692661501,+ 9.314404469578E-02));+#3201 = DIRECTION('',(0.,-1.,0.));+#3202 = DIRECTION('',(1.,0.,0.));+#3203 = DEFINITIONAL_REPRESENTATION('',(#3204),#3208);+#3204 = LINE('',#3205,#3206);+#3205 = CARTESIAN_POINT('',(-6.606579991408E-09,-9.314404469578E-02));+#3206 = VECTOR('',#3207,1.);+#3207 = DIRECTION('',(1.,0.));+#3208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3209 = ORIENTED_EDGE('',*,*,#3210,.T.);+#3210 = EDGE_CURVE('',#3183,#3211,#3213,.T.);+#3211 = VERTEX_POINT('',#3212);+#3212 = CARTESIAN_POINT('',(0.,0.345441613228,0.));+#3213 = SURFACE_CURVE('',#3214,(#3218,#3225),.PCURVE_S1.);+#3214 = LINE('',#3215,#3216);+#3215 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,0.));+#3216 = VECTOR('',#3217,1.);+#3217 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#3218 = PCURVE('',#254,#3219);+#3219 = DEFINITIONAL_REPRESENTATION('',(#3220),#3224);+#3220 = LINE('',#3221,#3222);+#3221 = CARTESIAN_POINT('',(-1.675537960586,-1.939307338499));+#3222 = VECTOR('',#3223,1.);+#3223 = DIRECTION('',(-0.90618313999,0.422885465342));+#3224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3225 = PCURVE('',#3226,#3231);+#3226 = PLANE('',#3227);+#3227 = AXIS2_PLACEMENT_3D('',#3228,#3229,#3230);+#3228 = CARTESIAN_POINT('',(7.446203941748E-02,0.310692661499,+ 9.314404469578E-02));+#3229 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#3230 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#3231 = DEFINITIONAL_REPRESENTATION('',(#3232),#3236);+#3232 = LINE('',#3233,#3234);+#3233 = CARTESIAN_POINT('',(4.153331351416E-12,9.314404469578E-02));+#3234 = VECTOR('',#3235,1.);+#3235 = DIRECTION('',(1.,0.));+#3236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3237 = ORIENTED_EDGE('',*,*,#3238,.F.);+#3238 = EDGE_CURVE('',#239,#3211,#3239,.T.);+#3239 = SURFACE_CURVE('',#3240,(#3244,#3251),.PCURVE_S1.);+#3240 = LINE('',#3241,#3242);+#3241 = CARTESIAN_POINT('',(0.,0.,0.));+#3242 = VECTOR('',#3243,1.);+#3243 = DIRECTION('',(0.,1.,0.));+#3244 = PCURVE('',#254,#3245);+#3245 = DEFINITIONAL_REPRESENTATION('',(#3246),#3250);+#3246 = LINE('',#3247,#3248);+#3247 = CARTESIAN_POINT('',(-1.75,-2.25));+#3248 = VECTOR('',#3249,1.);+#3249 = DIRECTION('',(0.,1.));+#3250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3251 = PCURVE('',#167,#3252);+#3252 = DEFINITIONAL_REPRESENTATION('',(#3253),#3257);+#3253 = LINE('',#3254,#3255);+#3254 = CARTESIAN_POINT('',(4.5,0.));+#3255 = VECTOR('',#3256,1.);+#3256 = DIRECTION('',(-1.,0.));+#3257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3258 = ORIENTED_EDGE('',*,*,#236,.F.);+#3259 = ORIENTED_EDGE('',*,*,#3260,.F.);+#3260 = EDGE_CURVE('',#3261,#237,#3263,.T.);+#3261 = VERTEX_POINT('',#3262);+#3262 = CARTESIAN_POINT('',(3.5,0.345943712857,0.));+#3263 = SURFACE_CURVE('',#3264,(#3268,#3275),.PCURVE_S1.);+#3264 = LINE('',#3265,#3266);+#3265 = CARTESIAN_POINT('',(3.5,0.345943712857,0.));+#3266 = VECTOR('',#3267,1.);+#3267 = DIRECTION('',(0.,-1.,0.));+#3268 = PCURVE('',#254,#3269);+#3269 = DEFINITIONAL_REPRESENTATION('',(#3270),#3274);+#3270 = LINE('',#3271,#3272);+#3271 = CARTESIAN_POINT('',(1.75,-1.904056287143));+#3272 = VECTOR('',#3273,1.);+#3273 = DIRECTION('',(0.,-1.));+#3274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3275 = PCURVE('',#221,#3276);+#3276 = DEFINITIONAL_REPRESENTATION('',(#3277),#3281);+#3277 = LINE('',#3278,#3279);+#3278 = CARTESIAN_POINT('',(0.345943712857,0.));+#3279 = VECTOR('',#3280,1.);+#3280 = DIRECTION('',(-1.,0.));+#3281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3282 = ORIENTED_EDGE('',*,*,#3283,.F.);+#3283 = EDGE_CURVE('',#3284,#3261,#3286,.T.);+#3284 = VERTEX_POINT('',#3285);+#3285 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,0.));+#3286 = SURFACE_CURVE('',#3287,(#3291,#3298),.PCURVE_S1.);+#3287 = LINE('',#3288,#3289);+#3288 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,0.));+#3289 = VECTOR('',#3290,1.);+#3290 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3291 = PCURVE('',#254,#3292);+#3292 = DEFINITIONAL_REPRESENTATION('',(#3293),#3297);+#3293 = LINE('',#3294,#3295);+#3294 = CARTESIAN_POINT('',(1.674462032806,-1.939307338499));+#3295 = VECTOR('',#3296,1.);+#3296 = DIRECTION('',(0.906183139998,0.422885465325));+#3297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3298 = PCURVE('',#3299,#3304);+#3299 = PLANE('',#3300);+#3300 = AXIS2_PLACEMENT_3D('',#3301,#3302,#3303);+#3301 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,+ 9.314404469578E-02));+#3302 = DIRECTION('',(0.422885465325,-0.906183139998,0.));+#3303 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3304 = DEFINITIONAL_REPRESENTATION('',(#3305),#3309);+#3305 = LINE('',#3306,#3307);+#3306 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#3307 = VECTOR('',#3308,1.);+#3308 = DIRECTION('',(1.,0.));+#3309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3310 = ORIENTED_EDGE('',*,*,#3311,.F.);+#3311 = EDGE_CURVE('',#3312,#3284,#3314,.T.);+#3312 = VERTEX_POINT('',#3313);+#3313 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#3314 = SURFACE_CURVE('',#3315,(#3319,#3326),.PCURVE_S1.);+#3315 = LINE('',#3316,#3317);+#3316 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#3317 = VECTOR('',#3318,1.);+#3318 = DIRECTION('',(1.,0.,0.));+#3319 = PCURVE('',#254,#3320);+#3320 = DEFINITIONAL_REPRESENTATION('',(#3321),#3325);+#3321 = LINE('',#3322,#3323);+#3322 = CARTESIAN_POINT('',(1.54946203942,-1.939307338499));+#3323 = VECTOR('',#3324,1.);+#3324 = DIRECTION('',(1.,0.));+#3325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3326 = PCURVE('',#3327,#3332);+#3327 = PLANE('',#3328);+#3328 = AXIS2_PLACEMENT_3D('',#3329,#3330,#3331);+#3329 = CARTESIAN_POINT('',(3.349462032809,0.310692661501,+ 9.314404469578E-02));+#3330 = DIRECTION('',(0.,-1.,0.));+#3331 = DIRECTION('',(1.,0.,0.));+#3332 = DEFINITIONAL_REPRESENTATION('',(#3333),#3337);+#3333 = LINE('',#3334,#3335);+#3334 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#3335 = VECTOR('',#3336,1.);+#3336 = DIRECTION('',(1.,0.));+#3337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3338 = ORIENTED_EDGE('',*,*,#3339,.T.);+#3339 = EDGE_CURVE('',#3312,#3340,#3342,.T.);+#3340 = VERTEX_POINT('',#3341);+#3341 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,0.));+#3342 = SURFACE_CURVE('',#3343,(#3347,#3354),.PCURVE_S1.);+#3343 = LINE('',#3344,#3345);+#3344 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#3345 = VECTOR('',#3346,1.);+#3346 = DIRECTION('',(0.,-1.,0.));+#3347 = PCURVE('',#254,#3348);+#3348 = DEFINITIONAL_REPRESENTATION('',(#3349),#3353);+#3349 = LINE('',#3350,#3351);+#3350 = CARTESIAN_POINT('',(1.54946203942,-1.939307338499));+#3351 = VECTOR('',#3352,1.);+#3352 = DIRECTION('',(0.,-1.));+#3353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3354 = PCURVE('',#3355,#3360);+#3355 = PLANE('',#3356);+#3356 = AXIS2_PLACEMENT_3D('',#3357,#3358,#3359);+#3357 = CARTESIAN_POINT('',(3.29946203942,0.310692661498,+ 9.314404469578E-02));+#3358 = DIRECTION('',(1.,0.,0.));+#3359 = DIRECTION('',(0.,-1.,0.));+#3360 = DEFINITIONAL_REPRESENTATION('',(#3361),#3365);+#3361 = LINE('',#3362,#3363);+#3362 = CARTESIAN_POINT('',(-2.999989145991E-12,9.314404469578E-02));+#3363 = VECTOR('',#3364,1.);+#3364 = DIRECTION('',(1.,0.));+#3365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3366 = ORIENTED_EDGE('',*,*,#3367,.T.);+#3367 = EDGE_CURVE('',#3340,#3368,#3370,.T.);+#3368 = VERTEX_POINT('',#3369);+#3369 = CARTESIAN_POINT('',(2.299462039494,0.210692661562,0.));+#3370 = SURFACE_CURVE('',#3371,(#3375,#3382),.PCURVE_S1.);+#3371 = LINE('',#3372,#3373);+#3372 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,0.));+#3373 = VECTOR('',#3374,1.);+#3374 = DIRECTION('',(-1.,5.593539520559E-11,0.));+#3375 = PCURVE('',#254,#3376);+#3376 = DEFINITIONAL_REPRESENTATION('',(#3377),#3381);+#3377 = LINE('',#3378,#3379);+#3378 = CARTESIAN_POINT('',(1.54946203942,-2.039307338502));+#3379 = VECTOR('',#3380,1.);+#3380 = DIRECTION('',(-1.,5.593539520559E-11));+#3381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3382 = PCURVE('',#3383,#3388);+#3383 = PLANE('',#3384);+#3384 = AXIS2_PLACEMENT_3D('',#3385,#3386,#3387);+#3385 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,+ 9.314404469578E-02));+#3386 = DIRECTION('',(-5.229737129445E-11,-1.,0.));+#3387 = DIRECTION('',(-1.,5.229737129445E-11,0.));+#3388 = DEFINITIONAL_REPRESENTATION('',(#3389),#3393);+#3389 = LINE('',#3390,#3391);+#3390 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3391 = VECTOR('',#3392,1.);+#3392 = DIRECTION('',(1.,0.));+#3393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3394 = ORIENTED_EDGE('',*,*,#3395,.T.);+#3395 = EDGE_CURVE('',#3368,#3396,#3398,.T.);+#3396 = VERTEX_POINT('',#3397);+#3397 = CARTESIAN_POINT('',(2.199462039417,0.310692661581,0.));+#3398 = SURFACE_CURVE('',#3399,(#3404,#3415),.PCURVE_S1.);+#3399 = CIRCLE('',#3400,9.999999999127E-02);+#3400 = AXIS2_PLACEMENT_3D('',#3401,#3402,#3403);+#3401 = CARTESIAN_POINT('',(2.299462039416,0.310692661553,0.));+#3402 = DIRECTION('',(0.,0.,-1.));+#3403 = DIRECTION('',(7.766987054193E-10,-1.,0.));+#3404 = PCURVE('',#254,#3405);+#3405 = DEFINITIONAL_REPRESENTATION('',(#3406),#3414);+#3406 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3407,#3408,#3409,#3410,+#3411,#3412,#3413),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3407 = CARTESIAN_POINT('',(0.549462039494,-2.039307338438));+#3408 = CARTESIAN_POINT('',(0.376256958752,-2.039307338573));+#3409 = CARTESIAN_POINT('',(0.462859499006,-1.889307338519));+#3410 = CARTESIAN_POINT('',(0.549462039261,-1.739307338464));+#3411 = CARTESIAN_POINT('',(0.636064579748,-1.889307338384));+#3412 = CARTESIAN_POINT('',(0.722667120235,-2.039307338304));+#3413 = CARTESIAN_POINT('',(0.549462039494,-2.039307338438));+#3414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3415 = PCURVE('',#3416,#3421);+#3416 = CYLINDRICAL_SURFACE('',#3417,9.999999999127E-02);+#3417 = AXIS2_PLACEMENT_3D('',#3418,#3419,#3420);+#3418 = CARTESIAN_POINT('',(2.299462039416,0.310692661553,+ 9.314404469578E-02));+#3419 = DIRECTION('',(0.,0.,-1.));+#3420 = DIRECTION('',(0.,1.,0.));+#3421 = DEFINITIONAL_REPRESENTATION('',(#3422),#3426);+#3422 = LINE('',#3423,#3424);+#3423 = CARTESIAN_POINT('',(3.141592652813,9.314404469578E-02));+#3424 = VECTOR('',#3425,1.);+#3425 = DIRECTION('',(1.,0.));+#3426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3427 = ORIENTED_EDGE('',*,*,#3428,.T.);+#3428 = EDGE_CURVE('',#3396,#3429,#3431,.T.);+#3429 = VERTEX_POINT('',#3430);+#3430 = CARTESIAN_POINT('',(2.199462039413,2.16059951011,0.));+#3431 = SURFACE_CURVE('',#3432,(#3436,#3443),.PCURVE_S1.);+#3432 = LINE('',#3433,#3434);+#3433 = CARTESIAN_POINT('',(2.199462039417,0.310692661581,0.));+#3434 = VECTOR('',#3435,1.);+#3435 = DIRECTION('',(-2.088044568489E-12,1.,0.));+#3436 = PCURVE('',#254,#3437);+#3437 = DEFINITIONAL_REPRESENTATION('',(#3438),#3442);+#3438 = LINE('',#3439,#3440);+#3439 = CARTESIAN_POINT('',(0.449462039417,-1.939307338419));+#3440 = VECTOR('',#3441,1.);+#3441 = DIRECTION('',(-2.088044568489E-12,1.));+#3442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3443 = PCURVE('',#3444,#3449);+#3444 = PLANE('',#3445);+#3445 = AXIS2_PLACEMENT_3D('',#3446,#3447,#3448);+#3446 = CARTESIAN_POINT('',(2.199462039414,0.310692661555,+ 9.314404469578E-02));+#3447 = DIRECTION('',(-1.,0.,0.));+#3448 = DIRECTION('',(0.,1.,0.));+#3449 = DEFINITIONAL_REPRESENTATION('',(#3450),#3454);+#3450 = LINE('',#3451,#3452);+#3451 = CARTESIAN_POINT('',(2.599997994679E-11,9.314404469578E-02));+#3452 = VECTOR('',#3453,1.);+#3453 = DIRECTION('',(1.,0.));+#3454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3455 = ORIENTED_EDGE('',*,*,#3456,.T.);+#3456 = EDGE_CURVE('',#3429,#3457,#3459,.T.);+#3457 = VERTEX_POINT('',#3458);+#3458 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,0.));+#3459 = SURFACE_CURVE('',#3460,(#3465,#3476),.PCURVE_S1.);+#3460 = CIRCLE('',#3461,0.100000000003);+#3461 = AXIS2_PLACEMENT_3D('',#3462,#3463,#3464);+#3462 = CARTESIAN_POINT('',(2.299462039416,2.160599510105,0.));+#3463 = DIRECTION('',(0.,0.,-1.));+#3464 = DIRECTION('',(-1.,5.126565838362E-11,0.));+#3465 = PCURVE('',#254,#3466);+#3466 = DEFINITIONAL_REPRESENTATION('',(#3467),#3475);+#3467 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3468,#3469,#3470,#3471,+#3472,#3473,#3474),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3468 = CARTESIAN_POINT('',(0.449462039413,-8.940048988987E-02));+#3469 = CARTESIAN_POINT('',(0.449462039422,8.380459087221E-02));+#3470 = CARTESIAN_POINT('',(0.599462039422,-2.797949516521E-03));+#3471 = CARTESIAN_POINT('',(0.749462039422,-8.940048990525E-02));+#3472 = CARTESIAN_POINT('',(0.599462039413,-0.176003030279));+#3473 = CARTESIAN_POINT('',(0.449462039404,-0.262605570652));+#3474 = CARTESIAN_POINT('',(0.449462039413,-8.940048988987E-02));+#3475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3476 = PCURVE('',#3477,#3482);+#3477 = CYLINDRICAL_SURFACE('',#3478,0.100000000003);+#3478 = AXIS2_PLACEMENT_3D('',#3479,#3480,#3481);+#3479 = CARTESIAN_POINT('',(2.299462039416,2.160599510105,+ 9.314404469578E-02));+#3480 = DIRECTION('',(0.,0.,-1.));+#3481 = DIRECTION('',(1.,-2.984422084397E-11,0.));+#3482 = DEFINITIONAL_REPRESENTATION('',(#3483),#3487);+#3483 = LINE('',#3484,#3485);+#3484 = CARTESIAN_POINT('',(3.141592653611,9.314404469578E-02));+#3485 = VECTOR('',#3486,1.);+#3486 = DIRECTION('',(1.,0.));+#3487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3488 = ORIENTED_EDGE('',*,*,#3489,.T.);+#3489 = EDGE_CURVE('',#3457,#3490,#3492,.T.);+#3490 = VERTEX_POINT('',#3491);+#3491 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,0.));+#3492 = SURFACE_CURVE('',#3493,(#3497,#3504),.PCURVE_S1.);+#3493 = LINE('',#3494,#3495);+#3494 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,0.));+#3495 = VECTOR('',#3496,1.);+#3496 = DIRECTION('',(1.,0.,0.));+#3497 = PCURVE('',#254,#3498);+#3498 = DEFINITIONAL_REPRESENTATION('',(#3499),#3503);+#3499 = LINE('',#3500,#3501);+#3500 = CARTESIAN_POINT('',(0.549462039416,1.0599510108E-02));+#3501 = VECTOR('',#3502,1.);+#3502 = DIRECTION('',(1.,0.));+#3503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3504 = PCURVE('',#3505,#3510);+#3505 = PLANE('',#3506);+#3506 = AXIS2_PLACEMENT_3D('',#3507,#3508,#3509);+#3507 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+ 9.314404469578E-02));+#3508 = DIRECTION('',(0.,1.,0.));+#3509 = DIRECTION('',(1.,0.,0.));+#3510 = DEFINITIONAL_REPRESENTATION('',(#3511),#3515);+#3511 = LINE('',#3512,#3513);+#3512 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3513 = VECTOR('',#3514,1.);+#3514 = DIRECTION('',(1.,0.));+#3515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3516 = ORIENTED_EDGE('',*,*,#3517,.T.);+#3517 = EDGE_CURVE('',#3490,#3518,#3520,.T.);+#3518 = VERTEX_POINT('',#3519);+#3519 = CARTESIAN_POINT('',(3.29946203942,2.060692661502,0.));+#3520 = SURFACE_CURVE('',#3521,(#3525,#3532),.PCURVE_S1.);+#3521 = LINE('',#3522,#3523);+#3522 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,0.));+#3523 = VECTOR('',#3524,1.);+#3524 = DIRECTION('',(2.026728773275E-04,-0.999999979462,0.));+#3525 = PCURVE('',#254,#3526);+#3526 = DEFINITIONAL_REPRESENTATION('',(#3527),#3531);+#3527 = LINE('',#3528,#3529);+#3528 = CARTESIAN_POINT('',(1.549421523723,1.0599510108E-02));+#3529 = VECTOR('',#3530,1.);+#3530 = DIRECTION('',(2.026728773275E-04,-0.999999979462));+#3531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3532 = PCURVE('',#3533,#3538);+#3533 = PLANE('',#3534);+#3534 = AXIS2_PLACEMENT_3D('',#3535,#3536,#3537);+#3535 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,+ 9.314404469578E-02));+#3536 = DIRECTION('',(0.999999979462,2.02672877327E-04,0.));+#3537 = DIRECTION('',(2.02672877327E-04,-0.999999979462,0.));+#3538 = DEFINITIONAL_REPRESENTATION('',(#3539),#3543);+#3539 = LINE('',#3540,#3541);+#3540 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#3541 = VECTOR('',#3542,1.);+#3542 = DIRECTION('',(1.,0.));+#3543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3544 = ORIENTED_EDGE('',*,*,#3545,.F.);+#3545 = EDGE_CURVE('',#3546,#3518,#3548,.T.);+#3546 = VERTEX_POINT('',#3547);+#3547 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,0.));+#3548 = SURFACE_CURVE('',#3549,(#3553,#3560),.PCURVE_S1.);+#3549 = LINE('',#3550,#3551);+#3550 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,0.));+#3551 = VECTOR('',#3552,1.);+#3552 = DIRECTION('',(-1.,0.,0.));+#3553 = PCURVE('',#254,#3554);+#3554 = DEFINITIONAL_REPRESENTATION('',(#3555),#3559);+#3555 = LINE('',#3556,#3557);+#3556 = CARTESIAN_POINT('',(1.674462032806,-0.189307338498));+#3557 = VECTOR('',#3558,1.);+#3558 = DIRECTION('',(-1.,0.));+#3559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3560 = PCURVE('',#3561,#3566);+#3561 = PLANE('',#3562);+#3562 = AXIS2_PLACEMENT_3D('',#3563,#3564,#3565);+#3563 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+ 9.314404469578E-02));+#3564 = DIRECTION('',(0.,1.,0.));+#3565 = DIRECTION('',(-1.,0.,0.));+#3566 = DEFINITIONAL_REPRESENTATION('',(#3567),#3571);+#3567 = LINE('',#3568,#3569);+#3568 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#3569 = VECTOR('',#3570,1.);+#3570 = DIRECTION('',(1.,0.));+#3571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3572 = ORIENTED_EDGE('',*,*,#3573,.F.);+#3573 = EDGE_CURVE('',#3574,#3546,#3576,.T.);+#3574 = VERTEX_POINT('',#3575);+#3575 = CARTESIAN_POINT('',(3.5,2.025441610143,0.));+#3576 = SURFACE_CURVE('',#3577,(#3581,#3588),.PCURVE_S1.);+#3577 = LINE('',#3578,#3579);+#3578 = CARTESIAN_POINT('',(3.5,2.025441610143,0.));+#3579 = VECTOR('',#3580,1.);+#3580 = DIRECTION('',(-0.906183139987,0.422885465349,0.));+#3581 = PCURVE('',#254,#3582);+#3582 = DEFINITIONAL_REPRESENTATION('',(#3583),#3587);+#3583 = LINE('',#3584,#3585);+#3584 = CARTESIAN_POINT('',(1.75,-0.224558389857));+#3585 = VECTOR('',#3586,1.);+#3586 = DIRECTION('',(-0.906183139987,0.422885465349));+#3587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3588 = PCURVE('',#3589,#3594);+#3589 = PLANE('',#3590);+#3590 = AXIS2_PLACEMENT_3D('',#3591,#3592,#3593);+#3591 = CARTESIAN_POINT('',(3.499462039424,2.025692658412,+ 9.314404469578E-02));+#3592 = DIRECTION('',(0.422885465349,0.906183139987,0.));+#3593 = DIRECTION('',(-0.906183139987,0.422885465349,0.));+#3594 = DEFINITIONAL_REPRESENTATION('',(#3595),#3599);+#3595 = LINE('',#3596,#3597);+#3596 = CARTESIAN_POINT('',(-5.936554680098E-04,-9.314404469578E-02));+#3597 = VECTOR('',#3598,1.);+#3598 = DIRECTION('',(1.,0.));+#3599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3600 = ORIENTED_EDGE('',*,*,#3601,.F.);+#3601 = EDGE_CURVE('',#3602,#3574,#3604,.T.);+#3602 = VERTEX_POINT('',#3603);+#3603 = CARTESIAN_POINT('',(3.5,2.795943709766,0.));+#3604 = SURFACE_CURVE('',#3605,(#3609,#3616),.PCURVE_S1.);+#3605 = LINE('',#3606,#3607);+#3606 = CARTESIAN_POINT('',(3.5,2.795943709766,0.));+#3607 = VECTOR('',#3608,1.);+#3608 = DIRECTION('',(0.,-1.,0.));+#3609 = PCURVE('',#254,#3610);+#3610 = DEFINITIONAL_REPRESENTATION('',(#3611),#3615);+#3611 = LINE('',#3612,#3613);+#3612 = CARTESIAN_POINT('',(1.75,0.545943709766));+#3613 = VECTOR('',#3614,1.);+#3614 = DIRECTION('',(0.,-1.));+#3615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3616 = PCURVE('',#221,#3617);+#3617 = DEFINITIONAL_REPRESENTATION('',(#3618),#3622);+#3618 = LINE('',#3619,#3620);+#3619 = CARTESIAN_POINT('',(2.795943709766,0.));+#3620 = VECTOR('',#3621,1.);+#3621 = DIRECTION('',(-1.,0.));+#3622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3623 = ORIENTED_EDGE('',*,*,#3624,.F.);+#3624 = EDGE_CURVE('',#3625,#3602,#3627,.T.);+#3625 = VERTEX_POINT('',#3626);+#3626 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,0.));+#3627 = SURFACE_CURVE('',#3628,(#3632,#3639),.PCURVE_S1.);+#3628 = LINE('',#3629,#3630);+#3629 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,0.));+#3630 = VECTOR('',#3631,1.);+#3631 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3632 = PCURVE('',#254,#3633);+#3633 = DEFINITIONAL_REPRESENTATION('',(#3634),#3638);+#3634 = LINE('',#3635,#3636);+#3635 = CARTESIAN_POINT('',(1.674462039427,0.510692661499));+#3636 = VECTOR('',#3637,1.);+#3637 = DIRECTION('',(0.906183139998,0.422885465325));+#3638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3639 = PCURVE('',#3640,#3645);+#3640 = PLANE('',#3641);+#3641 = AXIS2_PLACEMENT_3D('',#3642,#3643,#3644);+#3642 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,+ 9.314404469578E-02));+#3643 = DIRECTION('',(0.422885465325,-0.906183139998,0.));+#3644 = DIRECTION('',(0.906183139998,0.422885465325,0.));+#3645 = DEFINITIONAL_REPRESENTATION('',(#3646),#3650);+#3646 = LINE('',#3647,#3648);+#3647 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#3648 = VECTOR('',#3649,1.);+#3649 = DIRECTION('',(1.,0.));+#3650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3651 = ORIENTED_EDGE('',*,*,#3652,.F.);+#3652 = EDGE_CURVE('',#1054,#3625,#3653,.T.);+#3653 = SURFACE_CURVE('',#3654,(#3658,#3665),.PCURVE_S1.);+#3654 = LINE('',#3655,#3656);+#3655 = CARTESIAN_POINT('',(2.724462046003,2.760692661498,0.));+#3656 = VECTOR('',#3657,1.);+#3657 = DIRECTION('',(1.,2.216639591132E-12,0.));+#3658 = PCURVE('',#254,#3659);+#3659 = DEFINITIONAL_REPRESENTATION('',(#3660),#3664);+#3660 = LINE('',#3661,#3662);+#3661 = CARTESIAN_POINT('',(0.974462046003,0.510692661498));+#3662 = VECTOR('',#3663,1.);+#3663 = DIRECTION('',(1.,2.216639591132E-12));+#3664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3665 = PCURVE('',#3666,#3671);+#3666 = PLANE('',#3667);+#3667 = AXIS2_PLACEMENT_3D('',#3668,#3669,#3670);+#3668 = CARTESIAN_POINT('',(3.349462032809,2.760692661499,+ 9.314404469578E-02));+#3669 = DIRECTION('',(0.,-1.,0.));+#3670 = DIRECTION('',(1.,0.,0.));+#3671 = DEFINITIONAL_REPRESENTATION('',(#3672),#3676);+#3672 = LINE('',#3673,#3674);+#3673 = CARTESIAN_POINT('',(-0.624999986806,-9.314404469578E-02));+#3674 = VECTOR('',#3675,1.);+#3675 = DIRECTION('',(1.,0.));+#3676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3677 = ADVANCED_FACE('',(#3678),#3692,.F.);+#3678 = FACE_BOUND('',#3679,.F.);+#3679 = EDGE_LOOP('',(#3680,#3715,#3738,#3766,#3794,#3822));+#3680 = ORIENTED_EDGE('',*,*,#3681,.T.);+#3681 = EDGE_CURVE('',#3682,#3684,#3686,.T.);+#3682 = VERTEX_POINT('',#3683);+#3683 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,0.));+#3684 = VERTEX_POINT('',#3685);+#3685 = CARTESIAN_POINT('',(3.5,1.52544161323,0.));+#3686 = SURFACE_CURVE('',#3687,(#3691,#3703),.PCURVE_S1.);+#3687 = LINE('',#3688,#3689);+#3688 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,0.));+#3689 = VECTOR('',#3690,1.);+#3690 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#3691 = PCURVE('',#3692,#3697);+#3692 = PLANE('',#3693);+#3693 = AXIS2_PLACEMENT_3D('',#3694,#3695,#3696);+#3694 = CARTESIAN_POINT('',(1.75,2.25,0.));+#3695 = DIRECTION('',(0.,0.,1.));+#3696 = DIRECTION('',(1.,0.,-0.));+#3697 = DEFINITIONAL_REPRESENTATION('',(#3698),#3702);+#3698 = LINE('',#3699,#3700);+#3699 = CARTESIAN_POINT('',(1.674462039423,-0.689307338499));+#3700 = VECTOR('',#3701,1.);+#3701 = DIRECTION('',(0.906183139987,-0.422885465348));+#3702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3703 = PCURVE('',#3704,#3709);+#3704 = PLANE('',#3705);+#3705 = AXIS2_PLACEMENT_3D('',#3706,#3707,#3708);+#3706 = CARTESIAN_POINT('',(3.424462039427,1.560692661499,+ 9.314404469578E-02));+#3707 = DIRECTION('',(0.422885465348,0.906183139987,0.));+#3708 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#3709 = DEFINITIONAL_REPRESENTATION('',(#3710),#3714);+#3710 = LINE('',#3711,#3712);+#3711 = CARTESIAN_POINT('',(-4.470391181211E-12,9.314404469578E-02));+#3712 = VECTOR('',#3713,1.);+#3713 = DIRECTION('',(1.,0.));+#3714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3715 = ORIENTED_EDGE('',*,*,#3716,.F.);+#3716 = EDGE_CURVE('',#3717,#3684,#3719,.T.);+#3717 = VERTEX_POINT('',#3718);+#3718 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#3719 = SURFACE_CURVE('',#3720,(#3724,#3731),.PCURVE_S1.);+#3720 = LINE('',#3721,#3722);+#3721 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#3722 = VECTOR('',#3723,1.);+#3723 = DIRECTION('',(0.,-1.,0.));+#3724 = PCURVE('',#3692,#3725);+#3725 = DEFINITIONAL_REPRESENTATION('',(#3726),#3730);+#3726 = LINE('',#3727,#3728);+#3727 = CARTESIAN_POINT('',(1.75,-0.404056290232));+#3728 = VECTOR('',#3729,1.);+#3729 = DIRECTION('',(0.,-1.));+#3730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3731 = PCURVE('',#221,#3732);+#3732 = DEFINITIONAL_REPRESENTATION('',(#3733),#3737);+#3733 = LINE('',#3734,#3735);+#3734 = CARTESIAN_POINT('',(1.845943709768,0.));+#3735 = VECTOR('',#3736,1.);+#3736 = DIRECTION('',(-1.,0.));+#3737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3738 = ORIENTED_EDGE('',*,*,#3739,.T.);+#3739 = EDGE_CURVE('',#3717,#3740,#3742,.T.);+#3740 = VERTEX_POINT('',#3741);+#3741 = CARTESIAN_POINT('',(3.424462039423,1.810692661497,0.));+#3742 = SURFACE_CURVE('',#3743,(#3747,#3754),.PCURVE_S1.);+#3743 = LINE('',#3744,#3745);+#3744 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#3745 = VECTOR('',#3746,1.);+#3746 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#3747 = PCURVE('',#3692,#3748);+#3748 = DEFINITIONAL_REPRESENTATION('',(#3749),#3753);+#3749 = LINE('',#3750,#3751);+#3750 = CARTESIAN_POINT('',(1.75,-0.404056290232));+#3751 = VECTOR('',#3752,1.);+#3752 = DIRECTION('',(-0.906183139987,-0.422885465348));+#3753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3754 = PCURVE('',#3755,#3760);+#3755 = PLANE('',#3756);+#3756 = AXIS2_PLACEMENT_3D('',#3757,#3758,#3759);+#3757 = CARTESIAN_POINT('',(3.499462039424,1.845692661499,+ 9.314404469578E-02));+#3758 = DIRECTION('',(0.422885465348,-0.906183139987,0.));+#3759 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#3760 = DEFINITIONAL_REPRESENTATION('',(#3761),#3765);+#3761 = LINE('',#3762,#3763);+#3762 = CARTESIAN_POINT('',(-5.936554680101E-04,9.314404469578E-02));+#3763 = VECTOR('',#3764,1.);+#3764 = DIRECTION('',(1.,0.));+#3765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3766 = ORIENTED_EDGE('',*,*,#3767,.F.);+#3767 = EDGE_CURVE('',#3768,#3740,#3770,.T.);+#3768 = VERTEX_POINT('',#3769);+#3769 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#3770 = SURFACE_CURVE('',#3771,(#3775,#3782),.PCURVE_S1.);+#3771 = LINE('',#3772,#3773);+#3772 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#3773 = VECTOR('',#3774,1.);+#3774 = DIRECTION('',(1.,0.,0.));+#3775 = PCURVE('',#3692,#3776);+#3776 = DEFINITIONAL_REPRESENTATION('',(#3777),#3781);+#3777 = LINE('',#3778,#3779);+#3778 = CARTESIAN_POINT('',(1.54946203942,-0.439307338503));+#3779 = VECTOR('',#3780,1.);+#3780 = DIRECTION('',(1.,0.));+#3781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3782 = PCURVE('',#3783,#3788);+#3783 = PLANE('',#3784);+#3784 = AXIS2_PLACEMENT_3D('',#3785,#3786,#3787);+#3785 = CARTESIAN_POINT('',(3.349462039412,1.810692661497,+ 9.314404469578E-02));+#3786 = DIRECTION('',(0.,-1.,0.));+#3787 = DIRECTION('',(1.,0.,0.));+#3788 = DEFINITIONAL_REPRESENTATION('',(#3789),#3793);+#3789 = LINE('',#3790,#3791);+#3790 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#3791 = VECTOR('',#3792,1.);+#3792 = DIRECTION('',(1.,0.));+#3793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3794 = ORIENTED_EDGE('',*,*,#3795,.T.);+#3795 = EDGE_CURVE('',#3768,#3796,#3798,.T.);+#3796 = VERTEX_POINT('',#3797);+#3797 = CARTESIAN_POINT('',(3.29946203942,1.560692661501,0.));+#3798 = SURFACE_CURVE('',#3799,(#3803,#3810),.PCURVE_S1.);+#3799 = LINE('',#3800,#3801);+#3800 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#3801 = VECTOR('',#3802,1.);+#3802 = DIRECTION('',(0.,-1.,0.));+#3803 = PCURVE('',#3692,#3804);+#3804 = DEFINITIONAL_REPRESENTATION('',(#3805),#3809);+#3805 = LINE('',#3806,#3807);+#3806 = CARTESIAN_POINT('',(1.54946203942,-0.439307338503));+#3807 = VECTOR('',#3808,1.);+#3808 = DIRECTION('',(0.,-1.));+#3809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3810 = PCURVE('',#3811,#3816);+#3811 = PLANE('',#3812);+#3812 = AXIS2_PLACEMENT_3D('',#3813,#3814,#3815);+#3813 = CARTESIAN_POINT('',(3.29946203942,1.810692661499,+ 9.314404469578E-02));+#3814 = DIRECTION('',(1.,0.,0.));+#3815 = DIRECTION('',(0.,-1.,0.));+#3816 = DEFINITIONAL_REPRESENTATION('',(#3817),#3821);+#3817 = LINE('',#3818,#3819);+#3818 = CARTESIAN_POINT('',(1.99995575656E-12,9.314404469578E-02));+#3819 = VECTOR('',#3820,1.);+#3820 = DIRECTION('',(1.,0.));+#3821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3822 = ORIENTED_EDGE('',*,*,#3823,.F.);+#3823 = EDGE_CURVE('',#3682,#3796,#3824,.T.);+#3824 = SURFACE_CURVE('',#3825,(#3829,#3836),.PCURVE_S1.);+#3825 = LINE('',#3826,#3827);+#3826 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,0.));+#3827 = VECTOR('',#3828,1.);+#3828 = DIRECTION('',(-1.,0.,0.));+#3829 = PCURVE('',#3692,#3830);+#3830 = DEFINITIONAL_REPRESENTATION('',(#3831),#3835);+#3831 = LINE('',#3832,#3833);+#3832 = CARTESIAN_POINT('',(1.674462039423,-0.689307338499));+#3833 = VECTOR('',#3834,1.);+#3834 = DIRECTION('',(-1.,0.));+#3835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3836 = PCURVE('',#3837,#3842);+#3837 = PLANE('',#3838);+#3838 = AXIS2_PLACEMENT_3D('',#3839,#3840,#3841);+#3839 = CARTESIAN_POINT('',(3.424462032806,1.560692661501,+ 9.314404469578E-02));+#3840 = DIRECTION('',(0.,1.,0.));+#3841 = DIRECTION('',(-1.,0.,0.));+#3842 = DEFINITIONAL_REPRESENTATION('',(#3843),#3847);+#3843 = LINE('',#3844,#3845);+#3844 = CARTESIAN_POINT('',(-6.61700028104E-09,-9.314404469578E-02));+#3845 = VECTOR('',#3846,1.);+#3846 = DIRECTION('',(1.,0.));+#3847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3848 = ADVANCED_FACE('',(#3849),#3863,.F.);+#3849 = FACE_BOUND('',#3850,.F.);+#3850 = EDGE_LOOP('',(#3851,#3886,#3909,#3937,#3965,#3993));+#3851 = ORIENTED_EDGE('',*,*,#3852,.T.);+#3852 = EDGE_CURVE('',#3853,#3855,#3857,.T.);+#3853 = VERTEX_POINT('',#3854);+#3854 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,0.));+#3855 = VERTEX_POINT('',#3856);+#3856 = CARTESIAN_POINT('',(3.5,0.52544161323,0.));+#3857 = SURFACE_CURVE('',#3858,(#3862,#3874),.PCURVE_S1.);+#3858 = LINE('',#3859,#3860);+#3859 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,0.));+#3860 = VECTOR('',#3861,1.);+#3861 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#3862 = PCURVE('',#3863,#3868);+#3863 = PLANE('',#3864);+#3864 = AXIS2_PLACEMENT_3D('',#3865,#3866,#3867);+#3865 = CARTESIAN_POINT('',(1.75,2.25,0.));+#3866 = DIRECTION('',(0.,0.,1.));+#3867 = DIRECTION('',(1.,0.,-0.));+#3868 = DEFINITIONAL_REPRESENTATION('',(#3869),#3873);+#3869 = LINE('',#3870,#3871);+#3870 = CARTESIAN_POINT('',(1.674462039431,-1.689307338503));+#3871 = VECTOR('',#3872,1.);+#3872 = DIRECTION('',(0.90618313999,-0.422885465342));+#3873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3874 = PCURVE('',#3875,#3880);+#3875 = PLANE('',#3876);+#3876 = AXIS2_PLACEMENT_3D('',#3877,#3878,#3879);+#3877 = CARTESIAN_POINT('',(3.424462039427,0.560692661499,+ 9.314404469578E-02));+#3878 = DIRECTION('',(0.422885465342,0.90618313999,0.));+#3879 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#3880 = DEFINITIONAL_REPRESENTATION('',(#3881),#3885);+#3881 = LINE('',#3882,#3883);+#3882 = CARTESIAN_POINT('',(4.470391181211E-12,9.314404469578E-02));+#3883 = VECTOR('',#3884,1.);+#3884 = DIRECTION('',(1.,0.));+#3885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3886 = ORIENTED_EDGE('',*,*,#3887,.F.);+#3887 = EDGE_CURVE('',#3888,#3855,#3890,.T.);+#3888 = VERTEX_POINT('',#3889);+#3889 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#3890 = SURFACE_CURVE('',#3891,(#3895,#3902),.PCURVE_S1.);+#3891 = LINE('',#3892,#3893);+#3892 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#3893 = VECTOR('',#3894,1.);+#3894 = DIRECTION('',(0.,-1.,0.));+#3895 = PCURVE('',#3863,#3896);+#3896 = DEFINITIONAL_REPRESENTATION('',(#3897),#3901);+#3897 = LINE('',#3898,#3899);+#3898 = CARTESIAN_POINT('',(1.75,-1.404056290233));+#3899 = VECTOR('',#3900,1.);+#3900 = DIRECTION('',(0.,-1.));+#3901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3902 = PCURVE('',#221,#3903);+#3903 = DEFINITIONAL_REPRESENTATION('',(#3904),#3908);+#3904 = LINE('',#3905,#3906);+#3905 = CARTESIAN_POINT('',(0.845943709767,0.));+#3906 = VECTOR('',#3907,1.);+#3907 = DIRECTION('',(-1.,0.));+#3908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3909 = ORIENTED_EDGE('',*,*,#3910,.T.);+#3910 = EDGE_CURVE('',#3888,#3911,#3913,.T.);+#3911 = VERTEX_POINT('',#3912);+#3912 = CARTESIAN_POINT('',(3.424462039434,0.810692661502,0.));+#3913 = SURFACE_CURVE('',#3914,(#3918,#3925),.PCURVE_S1.);+#3914 = LINE('',#3915,#3916);+#3915 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#3916 = VECTOR('',#3917,1.);+#3917 = DIRECTION('',(-0.90618313999,-0.422885465342,0.));+#3918 = PCURVE('',#3863,#3919);+#3919 = DEFINITIONAL_REPRESENTATION('',(#3920),#3924);+#3920 = LINE('',#3921,#3922);+#3921 = CARTESIAN_POINT('',(1.75,-1.404056290233));+#3922 = VECTOR('',#3923,1.);+#3923 = DIRECTION('',(-0.90618313999,-0.422885465342));+#3924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3925 = PCURVE('',#3926,#3931);+#3926 = PLANE('',#3927);+#3927 = AXIS2_PLACEMENT_3D('',#3928,#3929,#3930);+#3928 = CARTESIAN_POINT('',(3.499462039424,0.845692661499,+ 9.314404469578E-02));+#3929 = DIRECTION('',(0.422885465342,-0.90618313999,0.));+#3930 = DIRECTION('',(-0.90618313999,-0.422885465342,0.));+#3931 = DEFINITIONAL_REPRESENTATION('',(#3932),#3936);+#3932 = LINE('',#3933,#3934);+#3933 = CARTESIAN_POINT('',(-5.936554675872E-04,9.314404469578E-02));+#3934 = VECTOR('',#3935,1.);+#3935 = DIRECTION('',(1.,0.));+#3936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3937 = ORIENTED_EDGE('',*,*,#3938,.F.);+#3938 = EDGE_CURVE('',#3939,#3911,#3941,.T.);+#3939 = VERTEX_POINT('',#3940);+#3940 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#3941 = SURFACE_CURVE('',#3942,(#3946,#3953),.PCURVE_S1.);+#3942 = LINE('',#3943,#3944);+#3943 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#3944 = VECTOR('',#3945,1.);+#3945 = DIRECTION('',(1.,0.,0.));+#3946 = PCURVE('',#3863,#3947);+#3947 = DEFINITIONAL_REPRESENTATION('',(#3948),#3952);+#3948 = LINE('',#3949,#3950);+#3949 = CARTESIAN_POINT('',(1.54946203942,-1.439307338498));+#3950 = VECTOR('',#3951,1.);+#3951 = DIRECTION('',(1.,0.));+#3952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3953 = PCURVE('',#3954,#3959);+#3954 = PLANE('',#3955);+#3955 = AXIS2_PLACEMENT_3D('',#3956,#3957,#3958);+#3956 = CARTESIAN_POINT('',(3.349462039412,0.810692661502,+ 9.314404469578E-02));+#3957 = DIRECTION('',(0.,-1.,0.));+#3958 = DIRECTION('',(1.,0.,0.));+#3959 = DEFINITIONAL_REPRESENTATION('',(#3960),#3964);+#3960 = LINE('',#3961,#3962);+#3961 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#3962 = VECTOR('',#3963,1.);+#3963 = DIRECTION('',(1.,0.));+#3964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3965 = ORIENTED_EDGE('',*,*,#3966,.T.);+#3966 = EDGE_CURVE('',#3939,#3967,#3969,.T.);+#3967 = VERTEX_POINT('',#3968);+#3968 = CARTESIAN_POINT('',(3.29946203942,0.560692661497,0.));+#3969 = SURFACE_CURVE('',#3970,(#3974,#3981),.PCURVE_S1.);+#3970 = LINE('',#3971,#3972);+#3971 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#3972 = VECTOR('',#3973,1.);+#3973 = DIRECTION('',(0.,-1.,0.));+#3974 = PCURVE('',#3863,#3975);+#3975 = DEFINITIONAL_REPRESENTATION('',(#3976),#3980);+#3976 = LINE('',#3977,#3978);+#3977 = CARTESIAN_POINT('',(1.54946203942,-1.439307338498));+#3978 = VECTOR('',#3979,1.);+#3979 = DIRECTION('',(0.,-1.));+#3980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3981 = PCURVE('',#3982,#3987);+#3982 = PLANE('',#3983);+#3983 = AXIS2_PLACEMENT_3D('',#3984,#3985,#3986);+#3984 = CARTESIAN_POINT('',(3.29946203942,0.810692661498,+ 9.314404469578E-02));+#3985 = DIRECTION('',(1.,0.,0.));+#3986 = DIRECTION('',(0.,-1.,0.));+#3987 = DEFINITIONAL_REPRESENTATION('',(#3988),#3992);+#3988 = LINE('',#3989,#3990);+#3989 = CARTESIAN_POINT('',(-4.000022535422E-12,9.314404469578E-02));+#3990 = VECTOR('',#3991,1.);+#3991 = DIRECTION('',(1.,0.));+#3992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3993 = ORIENTED_EDGE('',*,*,#3994,.F.);+#3994 = EDGE_CURVE('',#3853,#3967,#3995,.T.);+#3995 = SURFACE_CURVE('',#3996,(#4000,#4007),.PCURVE_S1.);+#3996 = LINE('',#3997,#3998);+#3997 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,0.));+#3998 = VECTOR('',#3999,1.);+#3999 = DIRECTION('',(-1.,0.,0.));+#4000 = PCURVE('',#3863,#4001);+#4001 = DEFINITIONAL_REPRESENTATION('',(#4002),#4006);+#4002 = LINE('',#4003,#4004);+#4003 = CARTESIAN_POINT('',(1.674462039431,-1.689307338503));+#4004 = VECTOR('',#4005,1.);+#4005 = DIRECTION('',(-1.,0.));+#4006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4007 = PCURVE('',#4008,#4013);+#4008 = PLANE('',#4009);+#4009 = AXIS2_PLACEMENT_3D('',#4010,#4011,#4012);+#4010 = CARTESIAN_POINT('',(3.424462032806,0.560692661497,+ 9.314404469578E-02));+#4011 = DIRECTION('',(0.,1.,0.));+#4012 = DIRECTION('',(-1.,0.,0.));+#4013 = DEFINITIONAL_REPRESENTATION('',(#4014),#4018);+#4014 = LINE('',#4015,#4016);+#4015 = CARTESIAN_POINT('',(-6.625000104066E-09,-9.314404469578E-02));+#4016 = VECTOR('',#4017,1.);+#4017 = DIRECTION('',(1.,0.));+#4018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4019 = ADVANCED_FACE('',(#4020),#4034,.F.);+#4020 = FACE_BOUND('',#4021,.F.);+#4021 = EDGE_LOOP('',(#4022,#4057,#4080,#4108,#4136,#4164));+#4022 = ORIENTED_EDGE('',*,*,#4023,.T.);+#4023 = EDGE_CURVE('',#4024,#4026,#4028,.T.);+#4024 = VERTEX_POINT('',#4025);+#4025 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,0.));+#4026 = VERTEX_POINT('',#4027);+#4027 = CARTESIAN_POINT('',(3.5,1.02544161323,0.));+#4028 = SURFACE_CURVE('',#4029,(#4033,#4045),.PCURVE_S1.);+#4029 = LINE('',#4030,#4031);+#4030 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,0.));+#4031 = VECTOR('',#4032,1.);+#4032 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#4033 = PCURVE('',#4034,#4039);+#4034 = PLANE('',#4035);+#4035 = AXIS2_PLACEMENT_3D('',#4036,#4037,#4038);+#4036 = CARTESIAN_POINT('',(1.75,2.25,0.));+#4037 = DIRECTION('',(0.,0.,1.));+#4038 = DIRECTION('',(1.,0.,-0.));+#4039 = DEFINITIONAL_REPRESENTATION('',(#4040),#4044);+#4040 = LINE('',#4041,#4042);+#4041 = CARTESIAN_POINT('',(1.674462039427,-1.189307338501));+#4042 = VECTOR('',#4043,1.);+#4043 = DIRECTION('',(0.90618313999,-0.422885465342));+#4044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4045 = PCURVE('',#4046,#4051);+#4046 = PLANE('',#4047);+#4047 = AXIS2_PLACEMENT_3D('',#4048,#4049,#4050);+#4048 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+ 9.314404469578E-02));+#4049 = DIRECTION('',(0.422885465342,0.90618313999,0.));+#4050 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#4051 = DEFINITIONAL_REPRESENTATION('',(#4052),#4056);+#4052 = LINE('',#4053,#4054);+#4053 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#4054 = VECTOR('',#4055,1.);+#4055 = DIRECTION('',(1.,0.));+#4056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4057 = ORIENTED_EDGE('',*,*,#4058,.F.);+#4058 = EDGE_CURVE('',#4059,#4026,#4061,.T.);+#4059 = VERTEX_POINT('',#4060);+#4060 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#4061 = SURFACE_CURVE('',#4062,(#4066,#4073),.PCURVE_S1.);+#4062 = LINE('',#4063,#4064);+#4063 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#4064 = VECTOR('',#4065,1.);+#4065 = DIRECTION('',(0.,-1.,0.));+#4066 = PCURVE('',#4034,#4067);+#4067 = DEFINITIONAL_REPRESENTATION('',(#4068),#4072);+#4068 = LINE('',#4069,#4070);+#4069 = CARTESIAN_POINT('',(1.75,-0.904056290232));+#4070 = VECTOR('',#4071,1.);+#4071 = DIRECTION('',(0.,-1.));+#4072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4073 = PCURVE('',#221,#4074);+#4074 = DEFINITIONAL_REPRESENTATION('',(#4075),#4079);+#4075 = LINE('',#4076,#4077);+#4076 = CARTESIAN_POINT('',(1.345943709768,0.));+#4077 = VECTOR('',#4078,1.);+#4078 = DIRECTION('',(-1.,0.));+#4079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4080 = ORIENTED_EDGE('',*,*,#4081,.T.);+#4081 = EDGE_CURVE('',#4059,#4082,#4084,.T.);+#4082 = VERTEX_POINT('',#4083);+#4083 = CARTESIAN_POINT('',(3.42446203942,1.310692661495,0.));+#4084 = SURFACE_CURVE('',#4085,(#4089,#4096),.PCURVE_S1.);+#4085 = LINE('',#4086,#4087);+#4086 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#4087 = VECTOR('',#4088,1.);+#4088 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#4089 = PCURVE('',#4034,#4090);+#4090 = DEFINITIONAL_REPRESENTATION('',(#4091),#4095);+#4091 = LINE('',#4092,#4093);+#4092 = CARTESIAN_POINT('',(1.75,-0.904056290232));+#4093 = VECTOR('',#4094,1.);+#4094 = DIRECTION('',(-0.906183139987,-0.422885465348));+#4095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4096 = PCURVE('',#4097,#4102);+#4097 = PLANE('',#4098);+#4098 = AXIS2_PLACEMENT_3D('',#4099,#4100,#4101);+#4099 = CARTESIAN_POINT('',(3.499462039424,1.345692661499,+ 9.314404469578E-02));+#4100 = DIRECTION('',(0.422885465348,-0.906183139987,0.));+#4101 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#4102 = DEFINITIONAL_REPRESENTATION('',(#4103),#4107);+#4103 = LINE('',#4104,#4105);+#4104 = CARTESIAN_POINT('',(-5.936554680101E-04,9.314404469578E-02));+#4105 = VECTOR('',#4106,1.);+#4106 = DIRECTION('',(1.,0.));+#4107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4108 = ORIENTED_EDGE('',*,*,#4109,.F.);+#4109 = EDGE_CURVE('',#4110,#4082,#4112,.T.);+#4110 = VERTEX_POINT('',#4111);+#4111 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#4112 = SURFACE_CURVE('',#4113,(#4117,#4124),.PCURVE_S1.);+#4113 = LINE('',#4114,#4115);+#4114 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#4115 = VECTOR('',#4116,1.);+#4116 = DIRECTION('',(1.,0.,0.));+#4117 = PCURVE('',#4034,#4118);+#4118 = DEFINITIONAL_REPRESENTATION('',(#4119),#4123);+#4119 = LINE('',#4120,#4121);+#4120 = CARTESIAN_POINT('',(1.54946203942,-0.939307338505));+#4121 = VECTOR('',#4122,1.);+#4122 = DIRECTION('',(1.,0.));+#4123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4124 = PCURVE('',#4125,#4130);+#4125 = PLANE('',#4126);+#4126 = AXIS2_PLACEMENT_3D('',#4127,#4128,#4129);+#4127 = CARTESIAN_POINT('',(3.349462032809,1.310692661495,+ 9.314404469578E-02));+#4128 = DIRECTION('',(0.,-1.,0.));+#4129 = DIRECTION('',(1.,0.,0.));+#4130 = DEFINITIONAL_REPRESENTATION('',(#4131),#4135);+#4131 = LINE('',#4132,#4133);+#4132 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#4133 = VECTOR('',#4134,1.);+#4134 = DIRECTION('',(1.,0.));+#4135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4136 = ORIENTED_EDGE('',*,*,#4137,.T.);+#4137 = EDGE_CURVE('',#4110,#4138,#4140,.T.);+#4138 = VERTEX_POINT('',#4139);+#4139 = CARTESIAN_POINT('',(3.29946203942,1.060692661499,0.));+#4140 = SURFACE_CURVE('',#4141,(#4145,#4152),.PCURVE_S1.);+#4141 = LINE('',#4142,#4143);+#4142 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#4143 = VECTOR('',#4144,1.);+#4144 = DIRECTION('',(0.,-1.,0.));+#4145 = PCURVE('',#4034,#4146);+#4146 = DEFINITIONAL_REPRESENTATION('',(#4147),#4151);+#4147 = LINE('',#4148,#4149);+#4148 = CARTESIAN_POINT('',(1.54946203942,-0.939307338505));+#4149 = VECTOR('',#4150,1.);+#4150 = DIRECTION('',(0.,-1.));+#4151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4152 = PCURVE('',#4153,#4158);+#4153 = PLANE('',#4154);+#4154 = AXIS2_PLACEMENT_3D('',#4155,#4156,#4157);+#4155 = CARTESIAN_POINT('',(3.29946203942,1.310692661499,+ 9.314404469578E-02));+#4156 = DIRECTION('',(1.,0.,0.));+#4157 = DIRECTION('',(0.,-1.,0.));+#4158 = DEFINITIONAL_REPRESENTATION('',(#4159),#4163);+#4159 = LINE('',#4160,#4161);+#4160 = CARTESIAN_POINT('',(3.99991151312E-12,9.314404469578E-02));+#4161 = VECTOR('',#4162,1.);+#4162 = DIRECTION('',(1.,0.));+#4163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4164 = ORIENTED_EDGE('',*,*,#4165,.F.);+#4165 = EDGE_CURVE('',#4024,#4138,#4166,.T.);+#4166 = SURFACE_CURVE('',#4167,(#4171,#4178),.PCURVE_S1.);+#4167 = LINE('',#4168,#4169);+#4168 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,0.));+#4169 = VECTOR('',#4170,1.);+#4170 = DIRECTION('',(-1.,0.,0.));+#4171 = PCURVE('',#4034,#4172);+#4172 = DEFINITIONAL_REPRESENTATION('',(#4173),#4177);+#4173 = LINE('',#4174,#4175);+#4174 = CARTESIAN_POINT('',(1.674462039427,-1.189307338501));+#4175 = VECTOR('',#4176,1.);+#4176 = DIRECTION('',(-1.,0.));+#4177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4178 = PCURVE('',#4179,#4184);+#4179 = PLANE('',#4180);+#4180 = AXIS2_PLACEMENT_3D('',#4181,#4182,#4183);+#4181 = CARTESIAN_POINT('',(3.424462032806,1.060692661499,+ 9.314404469578E-02));+#4182 = DIRECTION('',(0.,1.,0.));+#4183 = DIRECTION('',(-1.,0.,0.));+#4184 = DEFINITIONAL_REPRESENTATION('',(#4185),#4189);+#4185 = LINE('',#4186,#4187);+#4186 = CARTESIAN_POINT('',(-6.621000192553E-09,-9.314404469578E-02));+#4187 = VECTOR('',#4188,1.);+#4188 = DIRECTION('',(1.,0.));+#4189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4190 = ADVANCED_FACE('',(#4191),#563,.F.);+#4191 = FACE_BOUND('',#4192,.F.);+#4192 = EDGE_LOOP('',(#4193,#4216,#4217,#4240));+#4193 = ORIENTED_EDGE('',*,*,#4194,.F.);+#4194 = EDGE_CURVE('',#543,#4195,#4197,.T.);+#4195 = VERTEX_POINT('',#4196);+#4196 = CARTESIAN_POINT('',(0.,1.845441613228,9.314404469578E-02));+#4197 = SURFACE_CURVE('',#4198,(#4202,#4209),.PCURVE_S1.);+#4198 = LINE('',#4199,#4200);+#4199 = CARTESIAN_POINT('',(0.,1.845441613228,0.));+#4200 = VECTOR('',#4201,1.);+#4201 = DIRECTION('',(0.,0.,1.));+#4202 = PCURVE('',#563,#4203);+#4203 = DEFINITIONAL_REPRESENTATION('',(#4204),#4208);+#4204 = LINE('',#4205,#4206);+#4205 = CARTESIAN_POINT('',(8.217107131148E-02,9.314404469578E-02));+#4206 = VECTOR('',#4207,1.);+#4207 = DIRECTION('',(0.,-1.));+#4208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4209 = PCURVE('',#167,#4210);+#4210 = DEFINITIONAL_REPRESENTATION('',(#4211),#4215);+#4211 = LINE('',#4212,#4213);+#4212 = CARTESIAN_POINT('',(2.654558386772,0.));+#4213 = VECTOR('',#4214,1.);+#4214 = DIRECTION('',(0.,1.));+#4215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4216 = ORIENTED_EDGE('',*,*,#540,.F.);+#4217 = ORIENTED_EDGE('',*,*,#4218,.F.);+#4218 = EDGE_CURVE('',#4219,#541,#4221,.T.);+#4219 = VERTEX_POINT('',#4220);+#4220 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+ 9.314404469578E-02));+#4221 = SURFACE_CURVE('',#4222,(#4226,#4233),.PCURVE_S1.);+#4222 = LINE('',#4223,#4224);+#4223 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+ 9.314404469578E-02));+#4224 = VECTOR('',#4225,1.);+#4225 = DIRECTION('',(0.,0.,-1.));+#4226 = PCURVE('',#563,#4227);+#4227 = DEFINITIONAL_REPRESENTATION('',(#4228),#4232);+#4228 = LINE('',#4229,#4230);+#4229 = CARTESIAN_POINT('',(-4.162359949872E-12,-0.));+#4230 = VECTOR('',#4231,1.);+#4231 = DIRECTION('',(0.,1.));+#4232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4233 = PCURVE('',#696,#4234);+#4234 = DEFINITIONAL_REPRESENTATION('',(#4235),#4239);+#4235 = LINE('',#4236,#4237);+#4236 = CARTESIAN_POINT('',(-6.599270005458E-09,0.));+#4237 = VECTOR('',#4238,1.);+#4238 = DIRECTION('',(0.,-1.));+#4239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4240 = ORIENTED_EDGE('',*,*,#4241,.T.);+#4241 = EDGE_CURVE('',#4219,#4195,#4242,.T.);+#4242 = SURFACE_CURVE('',#4243,(#4247,#4254),.PCURVE_S1.);+#4243 = LINE('',#4244,#4245);+#4244 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+ 9.314404469578E-02));+#4245 = VECTOR('',#4246,1.);+#4246 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#4247 = PCURVE('',#563,#4248);+#4248 = DEFINITIONAL_REPRESENTATION('',(#4249),#4253);+#4249 = LINE('',#4250,#4251);+#4250 = CARTESIAN_POINT('',(-4.162359949872E-12,-0.));+#4251 = VECTOR('',#4252,1.);+#4252 = DIRECTION('',(1.,0.));+#4253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4254 = PCURVE('',#4255,#4260);+#4255 = PLANE('',#4256);+#4256 = AXIS2_PLACEMENT_3D('',#4257,#4258,#4259);+#4257 = CARTESIAN_POINT('',(0.594729450677,1.226456468988,+ 9.314404469578E-02));+#4258 = DIRECTION('',(0.,0.,1.));+#4259 = DIRECTION('',(1.,0.,-0.));+#4260 = DEFINITIONAL_REPRESENTATION('',(#4261),#4265);+#4261 = LINE('',#4262,#4263);+#4262 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#4263 = VECTOR('',#4264,1.);+#4264 = DIRECTION('',(-0.90618313999,0.422885465342));+#4265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4266 = ADVANCED_FACE('',(#4267),#167,.T.);+#4267 = FACE_BOUND('',#4268,.F.);+#4268 = EDGE_LOOP('',(#4269,#4299,#4327,#4355,#4383,#4406,#4427,#4428,+ #4451,#4479,#4507,#4535,#4563,#4586,#4607,#4608,#4629,#4630,#4631,+ #4632,#4655,#4678,#4706,#4734,#4762,#4785,#4806,#4807,#4830,#4853,+ #4881,#4909,#4937,#4960,#4981,#4982,#5005,#5028,#5056,#5084,#5112,+ #5135,#5156,#5157,#5158,#5181,#5209,#5237,#5265,#5288,#5309,#5310,+ #5333,#5361,#5389,#5417,#5445,#5468,#5489,#5490));+#4269 = ORIENTED_EDGE('',*,*,#4270,.T.);+#4270 = EDGE_CURVE('',#4271,#4273,#4275,.T.);+#4271 = VERTEX_POINT('',#4272);+#4272 = CARTESIAN_POINT('',(0.,3.295441613229,9.314404469578E-02));+#4273 = VERTEX_POINT('',#4274);+#4274 = CARTESIAN_POINT('',(0.,3.345983916503,9.314404469578E-02));+#4275 = SURFACE_CURVE('',#4276,(#4280,#4287),.PCURVE_S1.);+#4276 = LINE('',#4277,#4278);+#4277 = CARTESIAN_POINT('',(0.,3.295441613229,9.314404469578E-02));+#4278 = VECTOR('',#4279,1.);+#4279 = DIRECTION('',(0.,1.,0.));+#4280 = PCURVE('',#167,#4281);+#4281 = DEFINITIONAL_REPRESENTATION('',(#4282),#4286);+#4282 = LINE('',#4283,#4284);+#4283 = CARTESIAN_POINT('',(1.204558386771,9.314404469578E-02));+#4284 = VECTOR('',#4285,1.);+#4285 = DIRECTION('',(-1.,0.));+#4286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4287 = PCURVE('',#4288,#4293);+#4288 = PLANE('',#4289);+#4289 = AXIS2_PLACEMENT_3D('',#4290,#4291,#4292);+#4290 = CARTESIAN_POINT('',(0.417539932793,3.385692661811,+ 9.314404469578E-02));+#4291 = DIRECTION('',(0.,0.,1.));+#4292 = DIRECTION('',(1.,0.,-0.));+#4293 = DEFINITIONAL_REPRESENTATION('',(#4294),#4298);+#4294 = LINE('',#4295,#4296);+#4295 = CARTESIAN_POINT('',(-0.417539932793,-9.0251048582E-02));+#4296 = VECTOR('',#4297,1.);+#4297 = DIRECTION('',(0.,1.));+#4298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4299 = ORIENTED_EDGE('',*,*,#4300,.F.);+#4300 = EDGE_CURVE('',#4301,#4273,#4303,.T.);+#4301 = VERTEX_POINT('',#4302);+#4302 = CARTESIAN_POINT('',(0.,3.345983916503,0.193144044696));+#4303 = SURFACE_CURVE('',#4304,(#4308,#4315),.PCURVE_S1.);+#4304 = LINE('',#4305,#4306);+#4305 = CARTESIAN_POINT('',(0.,3.345983916503,0.193144044696));+#4306 = VECTOR('',#4307,1.);+#4307 = DIRECTION('',(0.,0.,-1.));+#4308 = PCURVE('',#167,#4309);+#4309 = DEFINITIONAL_REPRESENTATION('',(#4310),#4314);+#4310 = LINE('',#4311,#4312);+#4311 = CARTESIAN_POINT('',(1.154016083497,0.193144044696));+#4312 = VECTOR('',#4313,1.);+#4313 = DIRECTION('',(0.,-1.));+#4314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4315 = PCURVE('',#4316,#4321);+#4316 = PLANE('',#4317);+#4317 = AXIS2_PLACEMENT_3D('',#4318,#4319,#4320);+#4318 = CARTESIAN_POINT('',(-7.574131842608E-02,3.345983916503,+ 0.193144044696));+#4319 = DIRECTION('',(0.,1.,0.));+#4320 = DIRECTION('',(1.,0.,0.));+#4321 = DEFINITIONAL_REPRESENTATION('',(#4322),#4326);+#4322 = LINE('',#4323,#4324);+#4323 = CARTESIAN_POINT('',(7.574131842608E-02,0.));+#4324 = VECTOR('',#4325,1.);+#4325 = DIRECTION('',(0.,1.));+#4326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4327 = ORIENTED_EDGE('',*,*,#4328,.T.);+#4328 = EDGE_CURVE('',#4301,#4329,#4331,.T.);+#4329 = VERTEX_POINT('',#4330);+#4330 = CARTESIAN_POINT('',(0.,3.425983916501,0.193144044696));+#4331 = SURFACE_CURVE('',#4332,(#4336,#4343),.PCURVE_S1.);+#4332 = LINE('',#4333,#4334);+#4333 = CARTESIAN_POINT('',(0.,3.345983916503,0.193144044696));+#4334 = VECTOR('',#4335,1.);+#4335 = DIRECTION('',(0.,1.,0.));+#4336 = PCURVE('',#167,#4337);+#4337 = DEFINITIONAL_REPRESENTATION('',(#4338),#4342);+#4338 = LINE('',#4339,#4340);+#4339 = CARTESIAN_POINT('',(1.154016083497,0.193144044696));+#4340 = VECTOR('',#4341,1.);+#4341 = DIRECTION('',(-1.,0.));+#4342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4343 = PCURVE('',#4344,#4349);+#4344 = PLANE('',#4345);+#4345 = AXIS2_PLACEMENT_3D('',#4346,#4347,#4348);+#4346 = CARTESIAN_POINT('',(0.668982239989,3.350961726702,0.193144044696+ ));+#4347 = DIRECTION('',(0.,0.,1.));+#4348 = DIRECTION('',(1.,0.,-0.));+#4349 = DEFINITIONAL_REPRESENTATION('',(#4350),#4354);+#4350 = LINE('',#4351,#4352);+#4351 = CARTESIAN_POINT('',(-0.668982239989,-4.977810199E-03));+#4352 = VECTOR('',#4353,1.);+#4353 = DIRECTION('',(0.,1.));+#4354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4355 = ORIENTED_EDGE('',*,*,#4356,.T.);+#4356 = EDGE_CURVE('',#4329,#4357,#4359,.T.);+#4357 = VERTEX_POINT('',#4358);+#4358 = CARTESIAN_POINT('',(0.,3.425983916501,9.314404469578E-02));+#4359 = SURFACE_CURVE('',#4360,(#4364,#4371),.PCURVE_S1.);+#4360 = LINE('',#4361,#4362);+#4361 = CARTESIAN_POINT('',(0.,3.425983916501,0.193144044696));+#4362 = VECTOR('',#4363,1.);+#4363 = DIRECTION('',(0.,0.,-1.));+#4364 = PCURVE('',#167,#4365);+#4365 = DEFINITIONAL_REPRESENTATION('',(#4366),#4370);+#4366 = LINE('',#4367,#4368);+#4367 = CARTESIAN_POINT('',(1.074016083499,0.193144044696));+#4368 = VECTOR('',#4369,1.);+#4369 = DIRECTION('',(0.,-1.));+#4370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4371 = PCURVE('',#4372,#4377);+#4372 = PLANE('',#4373);+#4373 = AXIS2_PLACEMENT_3D('',#4374,#4375,#4376);+#4374 = CARTESIAN_POINT('',(5.925868158323E-02,3.425983916501,+ 0.193144044696));+#4375 = DIRECTION('',(0.,-1.,0.));+#4376 = DIRECTION('',(-1.,0.,0.));+#4377 = DEFINITIONAL_REPRESENTATION('',(#4378),#4382);+#4378 = LINE('',#4379,#4380);+#4379 = CARTESIAN_POINT('',(5.925868158323E-02,0.));+#4380 = VECTOR('',#4381,1.);+#4381 = DIRECTION('',(0.,1.));+#4382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4383 = ORIENTED_EDGE('',*,*,#4384,.T.);+#4384 = EDGE_CURVE('',#4357,#4385,#4387,.T.);+#4385 = VERTEX_POINT('',#4386);+#4386 = CARTESIAN_POINT('',(0.,3.475943712833,9.314404469578E-02));+#4387 = SURFACE_CURVE('',#4388,(#4392,#4399),.PCURVE_S1.);+#4388 = LINE('',#4389,#4390);+#4389 = CARTESIAN_POINT('',(0.,3.425983916501,9.314404469578E-02));+#4390 = VECTOR('',#4391,1.);+#4391 = DIRECTION('',(0.,1.,0.));+#4392 = PCURVE('',#167,#4393);+#4393 = DEFINITIONAL_REPRESENTATION('',(#4394),#4398);+#4394 = LINE('',#4395,#4396);+#4395 = CARTESIAN_POINT('',(1.074016083499,9.314404469578E-02));+#4396 = VECTOR('',#4397,1.);+#4397 = DIRECTION('',(-1.,0.));+#4398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4399 = PCURVE('',#4288,#4400);+#4400 = DEFINITIONAL_REPRESENTATION('',(#4401),#4405);+#4401 = LINE('',#4402,#4403);+#4402 = CARTESIAN_POINT('',(-0.417539932793,4.029125469E-02));+#4403 = VECTOR('',#4404,1.);+#4404 = DIRECTION('',(0.,1.));+#4405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4406 = ORIENTED_EDGE('',*,*,#4407,.F.);+#4407 = EDGE_CURVE('',#2563,#4385,#4408,.T.);+#4408 = SURFACE_CURVE('',#4409,(#4413,#4420),.PCURVE_S1.);+#4409 = LINE('',#4410,#4411);+#4410 = CARTESIAN_POINT('',(0.,3.475943712833,0.));+#4411 = VECTOR('',#4412,1.);+#4412 = DIRECTION('',(0.,0.,1.));+#4413 = PCURVE('',#167,#4414);+#4414 = DEFINITIONAL_REPRESENTATION('',(#4415),#4419);+#4415 = LINE('',#4416,#4417);+#4416 = CARTESIAN_POINT('',(1.024056287167,0.));+#4417 = VECTOR('',#4418,1.);+#4418 = DIRECTION('',(0.,1.));+#4419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4420 = PCURVE('',#2601,#4421);+#4421 = DEFINITIONAL_REPRESENTATION('',(#4422),#4426);+#4422 = LINE('',#4423,#4424);+#4423 = CARTESIAN_POINT('',(5.936627694815E-04,9.314404469578E-02));+#4424 = VECTOR('',#4425,1.);+#4425 = DIRECTION('',(0.,-1.));+#4426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4427 = ORIENTED_EDGE('',*,*,#2562,.T.);+#4428 = ORIENTED_EDGE('',*,*,#4429,.T.);+#4429 = EDGE_CURVE('',#2535,#4430,#4432,.T.);+#4430 = VERTEX_POINT('',#4431);+#4431 = CARTESIAN_POINT('',(0.,4.04544161631,9.314404469578E-02));+#4432 = SURFACE_CURVE('',#4433,(#4437,#4444),.PCURVE_S1.);+#4433 = LINE('',#4434,#4435);+#4434 = CARTESIAN_POINT('',(0.,4.04544161631,0.));+#4435 = VECTOR('',#4436,1.);+#4436 = DIRECTION('',(0.,0.,1.));+#4437 = PCURVE('',#167,#4438);+#4438 = DEFINITIONAL_REPRESENTATION('',(#4439),#4443);+#4439 = LINE('',#4440,#4441);+#4440 = CARTESIAN_POINT('',(0.45455838369,0.));+#4441 = VECTOR('',#4442,1.);+#4442 = DIRECTION('',(0.,1.));+#4443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4444 = PCURVE('',#2550,#4445);+#4445 = DEFINITIONAL_REPRESENTATION('',(#4446),#4450);+#4446 = LINE('',#4447,#4448);+#4447 = CARTESIAN_POINT('',(5.936554721189E-04,-9.314404469578E-02));+#4448 = VECTOR('',#4449,1.);+#4449 = DIRECTION('',(0.,1.));+#4450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4451 = ORIENTED_EDGE('',*,*,#4452,.T.);+#4452 = EDGE_CURVE('',#4430,#4453,#4455,.T.);+#4453 = VERTEX_POINT('',#4454);+#4454 = CARTESIAN_POINT('',(0.,4.095983918047,9.314404469578E-02));+#4455 = SURFACE_CURVE('',#4456,(#4460,#4467),.PCURVE_S1.);+#4456 = LINE('',#4457,#4458);+#4457 = CARTESIAN_POINT('',(0.,4.04544161631,9.314404469578E-02));+#4458 = VECTOR('',#4459,1.);+#4459 = DIRECTION('',(0.,1.,0.));+#4460 = PCURVE('',#167,#4461);+#4461 = DEFINITIONAL_REPRESENTATION('',(#4462),#4466);+#4462 = LINE('',#4463,#4464);+#4463 = CARTESIAN_POINT('',(0.45455838369,9.314404469578E-02));+#4464 = VECTOR('',#4465,1.);+#4465 = DIRECTION('',(-1.,0.));+#4466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4467 = PCURVE('',#4468,#4473);+#4468 = PLANE('',#4469);+#4469 = AXIS2_PLACEMENT_3D('',#4470,#4471,#4472);+#4470 = CARTESIAN_POINT('',(0.457146247734,4.201757054108,+ 9.314404469578E-02));+#4471 = DIRECTION('',(0.,0.,1.));+#4472 = DIRECTION('',(1.,0.,-0.));+#4473 = DEFINITIONAL_REPRESENTATION('',(#4474),#4478);+#4474 = LINE('',#4475,#4476);+#4475 = CARTESIAN_POINT('',(-0.457146247734,-0.156315437798));+#4476 = VECTOR('',#4477,1.);+#4477 = DIRECTION('',(0.,1.));+#4478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4479 = ORIENTED_EDGE('',*,*,#4480,.F.);+#4480 = EDGE_CURVE('',#4481,#4453,#4483,.T.);+#4481 = VERTEX_POINT('',#4482);+#4482 = CARTESIAN_POINT('',(0.,4.095983918047,0.193144044696));+#4483 = SURFACE_CURVE('',#4484,(#4488,#4495),.PCURVE_S1.);+#4484 = LINE('',#4485,#4486);+#4485 = CARTESIAN_POINT('',(0.,4.095983918047,0.193144044696));+#4486 = VECTOR('',#4487,1.);+#4487 = DIRECTION('',(0.,0.,-1.));+#4488 = PCURVE('',#167,#4489);+#4489 = DEFINITIONAL_REPRESENTATION('',(#4490),#4494);+#4490 = LINE('',#4491,#4492);+#4491 = CARTESIAN_POINT('',(0.404016081953,0.193144044696));+#4492 = VECTOR('',#4493,1.);+#4493 = DIRECTION('',(0.,-1.));+#4494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4495 = PCURVE('',#4496,#4501);+#4496 = PLANE('',#4497);+#4497 = AXIS2_PLACEMENT_3D('',#4498,#4499,#4500);+#4498 = CARTESIAN_POINT('',(-7.574131511552E-02,4.095983918047,+ 0.193144044696));+#4499 = DIRECTION('',(0.,1.,0.));+#4500 = DIRECTION('',(1.,0.,0.));+#4501 = DEFINITIONAL_REPRESENTATION('',(#4502),#4506);+#4502 = LINE('',#4503,#4504);+#4503 = CARTESIAN_POINT('',(7.574131511552E-02,0.));+#4504 = VECTOR('',#4505,1.);+#4505 = DIRECTION('',(0.,1.));+#4506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4507 = ORIENTED_EDGE('',*,*,#4508,.F.);+#4508 = EDGE_CURVE('',#4509,#4481,#4511,.T.);+#4509 = VERTEX_POINT('',#4510);+#4510 = CARTESIAN_POINT('',(0.,4.175983918045,0.193144044696));+#4511 = SURFACE_CURVE('',#4512,(#4516,#4523),.PCURVE_S1.);+#4512 = LINE('',#4513,#4514);+#4513 = CARTESIAN_POINT('',(0.,4.175983918045,0.193144044696));+#4514 = VECTOR('',#4515,1.);+#4515 = DIRECTION('',(0.,-1.,0.));+#4516 = PCURVE('',#167,#4517);+#4517 = DEFINITIONAL_REPRESENTATION('',(#4518),#4522);+#4518 = LINE('',#4519,#4520);+#4519 = CARTESIAN_POINT('',(0.324016081955,0.193144044696));+#4520 = VECTOR('',#4521,1.);+#4521 = DIRECTION('',(1.,0.));+#4522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4523 = PCURVE('',#4524,#4529);+#4524 = PLANE('',#4525);+#4525 = AXIS2_PLACEMENT_3D('',#4526,#4527,#4528);+#4526 = CARTESIAN_POINT('',(0.701675974295,4.003933868083,0.193144044696+ ));+#4527 = DIRECTION('',(0.,0.,1.));+#4528 = DIRECTION('',(1.,0.,-0.));+#4529 = DEFINITIONAL_REPRESENTATION('',(#4530),#4534);+#4530 = LINE('',#4531,#4532);+#4531 = CARTESIAN_POINT('',(-0.701675974295,0.172050049962));+#4532 = VECTOR('',#4533,1.);+#4533 = DIRECTION('',(0.,-1.));+#4534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4535 = ORIENTED_EDGE('',*,*,#4536,.T.);+#4536 = EDGE_CURVE('',#4509,#4537,#4539,.T.);+#4537 = VERTEX_POINT('',#4538);+#4538 = CARTESIAN_POINT('',(0.,4.175983918045,9.314404469578E-02));+#4539 = SURFACE_CURVE('',#4540,(#4544,#4551),.PCURVE_S1.);+#4540 = LINE('',#4541,#4542);+#4541 = CARTESIAN_POINT('',(0.,4.175983918045,0.193144044696));+#4542 = VECTOR('',#4543,1.);+#4543 = DIRECTION('',(0.,0.,-1.));+#4544 = PCURVE('',#167,#4545);+#4545 = DEFINITIONAL_REPRESENTATION('',(#4546),#4550);+#4546 = LINE('',#4547,#4548);+#4547 = CARTESIAN_POINT('',(0.324016081955,0.193144044696));+#4548 = VECTOR('',#4549,1.);+#4549 = DIRECTION('',(0.,-1.));+#4550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4551 = PCURVE('',#4552,#4557);+#4552 = PLANE('',#4553);+#4553 = AXIS2_PLACEMENT_3D('',#4554,#4555,#4556);+#4554 = CARTESIAN_POINT('',(5.92586848938E-02,4.175983918045,+ 0.193144044696));+#4555 = DIRECTION('',(0.,-1.,0.));+#4556 = DIRECTION('',(-1.,0.,0.));+#4557 = DEFINITIONAL_REPRESENTATION('',(#4558),#4562);+#4558 = LINE('',#4559,#4560);+#4559 = CARTESIAN_POINT('',(5.92586848938E-02,0.));+#4560 = VECTOR('',#4561,1.);+#4561 = DIRECTION('',(0.,1.));+#4562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4563 = ORIENTED_EDGE('',*,*,#4564,.T.);+#4564 = EDGE_CURVE('',#4537,#4565,#4567,.T.);+#4565 = VERTEX_POINT('',#4566);+#4566 = CARTESIAN_POINT('',(0.,4.225943709765,9.314404469578E-02));+#4567 = SURFACE_CURVE('',#4568,(#4572,#4579),.PCURVE_S1.);+#4568 = LINE('',#4569,#4570);+#4569 = CARTESIAN_POINT('',(0.,4.175983918045,9.314404469578E-02));+#4570 = VECTOR('',#4571,1.);+#4571 = DIRECTION('',(0.,1.,0.));+#4572 = PCURVE('',#167,#4573);+#4573 = DEFINITIONAL_REPRESENTATION('',(#4574),#4578);+#4574 = LINE('',#4575,#4576);+#4575 = CARTESIAN_POINT('',(0.324016081955,9.314404469578E-02));+#4576 = VECTOR('',#4577,1.);+#4577 = DIRECTION('',(-1.,0.));+#4578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4579 = PCURVE('',#4468,#4580);+#4580 = DEFINITIONAL_REPRESENTATION('',(#4581),#4585);+#4581 = LINE('',#4582,#4583);+#4582 = CARTESIAN_POINT('',(-0.457146247734,-2.5773136063E-02));+#4583 = VECTOR('',#4584,1.);+#4584 = DIRECTION('',(0.,1.));+#4585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4586 = ORIENTED_EDGE('',*,*,#4587,.F.);+#4587 = EDGE_CURVE('',#2316,#4565,#4588,.T.);+#4588 = SURFACE_CURVE('',#4589,(#4593,#4600),.PCURVE_S1.);+#4589 = LINE('',#4590,#4591);+#4590 = CARTESIAN_POINT('',(0.,4.225943709765,0.));+#4591 = VECTOR('',#4592,1.);+#4592 = DIRECTION('',(0.,0.,1.));+#4593 = PCURVE('',#167,#4594);+#4594 = DEFINITIONAL_REPRESENTATION('',(#4595),#4599);+#4595 = LINE('',#4596,#4597);+#4596 = CARTESIAN_POINT('',(0.274056290235,0.));+#4597 = VECTOR('',#4598,1.);+#4598 = DIRECTION('',(0.,1.));+#4599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4600 = PCURVE('',#2354,#4601);+#4601 = DEFINITIONAL_REPRESENTATION('',(#4602),#4606);+#4602 = LINE('',#4603,#4604);+#4603 = CARTESIAN_POINT('',(5.936554721188E-04,9.314404469578E-02));+#4604 = VECTOR('',#4605,1.);+#4605 = DIRECTION('',(0.,-1.));+#4606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4607 = ORIENTED_EDGE('',*,*,#2315,.T.);+#4608 = ORIENTED_EDGE('',*,*,#4609,.F.);+#4609 = EDGE_CURVE('',#152,#2293,#4610,.T.);+#4610 = SURFACE_CURVE('',#4611,(#4615,#4622),.PCURVE_S1.);+#4611 = LINE('',#4612,#4613);+#4612 = CARTESIAN_POINT('',(0.,4.5,1.9));+#4613 = VECTOR('',#4614,1.);+#4614 = DIRECTION('',(0.,0.,-1.));+#4615 = PCURVE('',#167,#4616);+#4616 = DEFINITIONAL_REPRESENTATION('',(#4617),#4621);+#4617 = LINE('',#4618,#4619);+#4618 = CARTESIAN_POINT('',(0.,1.9));+#4619 = VECTOR('',#4620,1.);+#4620 = DIRECTION('',(0.,-1.));+#4621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4622 = PCURVE('',#195,#4623);+#4623 = DEFINITIONAL_REPRESENTATION('',(#4624),#4628);+#4624 = LINE('',#4625,#4626);+#4625 = CARTESIAN_POINT('',(3.5,1.9));+#4626 = VECTOR('',#4627,1.);+#4627 = DIRECTION('',(0.,-1.));+#4628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4629 = ORIENTED_EDGE('',*,*,#151,.F.);+#4630 = ORIENTED_EDGE('',*,*,#266,.T.);+#4631 = ORIENTED_EDGE('',*,*,#3238,.T.);+#4632 = ORIENTED_EDGE('',*,*,#4633,.T.);+#4633 = EDGE_CURVE('',#3211,#4634,#4636,.T.);+#4634 = VERTEX_POINT('',#4635);+#4635 = CARTESIAN_POINT('',(0.,0.345441613228,9.314404469578E-02));+#4636 = SURFACE_CURVE('',#4637,(#4641,#4648),.PCURVE_S1.);+#4637 = LINE('',#4638,#4639);+#4638 = CARTESIAN_POINT('',(0.,0.345441613228,0.));+#4639 = VECTOR('',#4640,1.);+#4640 = DIRECTION('',(0.,0.,1.));+#4641 = PCURVE('',#167,#4642);+#4642 = DEFINITIONAL_REPRESENTATION('',(#4643),#4647);+#4643 = LINE('',#4644,#4645);+#4644 = CARTESIAN_POINT('',(4.154558386772,0.));+#4645 = VECTOR('',#4646,1.);+#4646 = DIRECTION('',(0.,1.));+#4647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4648 = PCURVE('',#3226,#4649);+#4649 = DEFINITIONAL_REPRESENTATION('',(#4650),#4654);+#4650 = LINE('',#4651,#4652);+#4651 = CARTESIAN_POINT('',(8.217107131147E-02,9.314404469578E-02));+#4652 = VECTOR('',#4653,1.);+#4653 = DIRECTION('',(0.,-1.));+#4654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4655 = ORIENTED_EDGE('',*,*,#4656,.T.);+#4656 = EDGE_CURVE('',#4634,#4657,#4659,.T.);+#4657 = VERTEX_POINT('',#4658);+#4658 = CARTESIAN_POINT('',(0.,0.395983918053,9.314404469578E-02));+#4659 = SURFACE_CURVE('',#4660,(#4664,#4671),.PCURVE_S1.);+#4660 = LINE('',#4661,#4662);+#4661 = CARTESIAN_POINT('',(0.,0.345441613228,9.314404469578E-02));+#4662 = VECTOR('',#4663,1.);+#4663 = DIRECTION('',(0.,1.,0.));+#4664 = PCURVE('',#167,#4665);+#4665 = DEFINITIONAL_REPRESENTATION('',(#4666),#4670);+#4666 = LINE('',#4667,#4668);+#4667 = CARTESIAN_POINT('',(4.154558386772,9.314404469578E-02));+#4668 = VECTOR('',#4669,1.);+#4669 = DIRECTION('',(-1.,0.));+#4670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4671 = PCURVE('',#4255,#4672);+#4672 = DEFINITIONAL_REPRESENTATION('',(#4673),#4677);+#4673 = LINE('',#4674,#4675);+#4674 = CARTESIAN_POINT('',(-0.594729450677,-0.88101485576));+#4675 = VECTOR('',#4676,1.);+#4676 = DIRECTION('',(0.,1.));+#4677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4678 = ORIENTED_EDGE('',*,*,#4679,.F.);+#4679 = EDGE_CURVE('',#4680,#4657,#4682,.T.);+#4680 = VERTEX_POINT('',#4681);+#4681 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#4682 = SURFACE_CURVE('',#4683,(#4687,#4694),.PCURVE_S1.);+#4683 = LINE('',#4684,#4685);+#4684 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#4685 = VECTOR('',#4686,1.);+#4686 = DIRECTION('',(0.,0.,-1.));+#4687 = PCURVE('',#167,#4688);+#4688 = DEFINITIONAL_REPRESENTATION('',(#4689),#4693);+#4689 = LINE('',#4690,#4691);+#4690 = CARTESIAN_POINT('',(4.104016081947,0.193144044696));+#4691 = VECTOR('',#4692,1.);+#4692 = DIRECTION('',(0.,-1.));+#4693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4694 = PCURVE('',#4695,#4700);+#4695 = PLANE('',#4696);+#4696 = AXIS2_PLACEMENT_3D('',#4697,#4698,#4699);+#4697 = CARTESIAN_POINT('',(-7.574131513371E-02,0.395983918053,+ 0.193144044696));+#4698 = DIRECTION('',(0.,1.,0.));+#4699 = DIRECTION('',(1.,0.,0.));+#4700 = DEFINITIONAL_REPRESENTATION('',(#4701),#4705);+#4701 = LINE('',#4702,#4703);+#4702 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#4703 = VECTOR('',#4704,1.);+#4704 = DIRECTION('',(0.,1.));+#4705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4706 = ORIENTED_EDGE('',*,*,#4707,.T.);+#4707 = EDGE_CURVE('',#4680,#4708,#4710,.T.);+#4708 = VERTEX_POINT('',#4709);+#4709 = CARTESIAN_POINT('',(0.,0.475983918055,0.193144044696));+#4710 = SURFACE_CURVE('',#4711,(#4715,#4722),.PCURVE_S1.);+#4711 = LINE('',#4712,#4713);+#4712 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#4713 = VECTOR('',#4714,1.);+#4714 = DIRECTION('',(0.,1.,0.));+#4715 = PCURVE('',#167,#4716);+#4716 = DEFINITIONAL_REPRESENTATION('',(#4717),#4721);+#4717 = LINE('',#4718,#4719);+#4718 = CARTESIAN_POINT('',(4.104016081947,0.193144044696));+#4719 = VECTOR('',#4720,1.);+#4720 = DIRECTION('',(-1.,0.));+#4721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4722 = PCURVE('',#4723,#4728);+#4723 = PLANE('',#4724);+#4724 = AXIS2_PLACEMENT_3D('',#4725,#4726,#4727);+#4725 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+ ));+#4726 = DIRECTION('',(0.,0.,1.));+#4727 = DIRECTION('',(1.,0.,-0.));+#4728 = DEFINITIONAL_REPRESENTATION('',(#4729),#4733);+#4729 = LINE('',#4730,#4731);+#4730 = CARTESIAN_POINT('',(-0.687763226012,-0.855292602749));+#4731 = VECTOR('',#4732,1.);+#4732 = DIRECTION('',(0.,1.));+#4733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4734 = ORIENTED_EDGE('',*,*,#4735,.T.);+#4735 = EDGE_CURVE('',#4708,#4736,#4738,.T.);+#4736 = VERTEX_POINT('',#4737);+#4737 = CARTESIAN_POINT('',(0.,0.475983918055,9.314404469578E-02));+#4738 = SURFACE_CURVE('',#4739,(#4743,#4750),.PCURVE_S1.);+#4739 = LINE('',#4740,#4741);+#4740 = CARTESIAN_POINT('',(0.,0.475983918055,0.193144044696));+#4741 = VECTOR('',#4742,1.);+#4742 = DIRECTION('',(0.,0.,-1.));+#4743 = PCURVE('',#167,#4744);+#4744 = DEFINITIONAL_REPRESENTATION('',(#4745),#4749);+#4745 = LINE('',#4746,#4747);+#4746 = CARTESIAN_POINT('',(4.024016081945,0.193144044696));+#4747 = VECTOR('',#4748,1.);+#4748 = DIRECTION('',(0.,-1.));+#4749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4750 = PCURVE('',#4751,#4756);+#4751 = PLANE('',#4752);+#4752 = AXIS2_PLACEMENT_3D('',#4753,#4754,#4755);+#4753 = CARTESIAN_POINT('',(5.92586848756E-02,0.475983918055,+ 0.193144044696));+#4754 = DIRECTION('',(0.,-1.,0.));+#4755 = DIRECTION('',(-1.,0.,0.));+#4756 = DEFINITIONAL_REPRESENTATION('',(#4757),#4761);+#4757 = LINE('',#4758,#4759);+#4758 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#4759 = VECTOR('',#4760,1.);+#4760 = DIRECTION('',(0.,1.));+#4761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4762 = ORIENTED_EDGE('',*,*,#4763,.T.);+#4763 = EDGE_CURVE('',#4736,#4764,#4766,.T.);+#4764 = VERTEX_POINT('',#4765);+#4765 = CARTESIAN_POINT('',(0.,0.525943709769,9.314404469578E-02));+#4766 = SURFACE_CURVE('',#4767,(#4771,#4778),.PCURVE_S1.);+#4767 = LINE('',#4768,#4769);+#4768 = CARTESIAN_POINT('',(0.,0.475983918055,9.314404469578E-02));+#4769 = VECTOR('',#4770,1.);+#4770 = DIRECTION('',(0.,1.,0.));+#4771 = PCURVE('',#167,#4772);+#4772 = DEFINITIONAL_REPRESENTATION('',(#4773),#4777);+#4773 = LINE('',#4774,#4775);+#4774 = CARTESIAN_POINT('',(4.024016081945,9.314404469578E-02));+#4775 = VECTOR('',#4776,1.);+#4776 = DIRECTION('',(-1.,0.));+#4777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4778 = PCURVE('',#4255,#4779);+#4779 = DEFINITIONAL_REPRESENTATION('',(#4780),#4784);+#4780 = LINE('',#4781,#4782);+#4781 = CARTESIAN_POINT('',(-0.594729450677,-0.750472550933));+#4782 = VECTOR('',#4783,1.);+#4783 = DIRECTION('',(0.,1.));+#4784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4785 = ORIENTED_EDGE('',*,*,#4786,.F.);+#4786 = EDGE_CURVE('',#974,#4764,#4787,.T.);+#4787 = SURFACE_CURVE('',#4788,(#4792,#4799),.PCURVE_S1.);+#4788 = LINE('',#4789,#4790);+#4789 = CARTESIAN_POINT('',(0.,0.525943709769,0.));+#4790 = VECTOR('',#4791,1.);+#4791 = DIRECTION('',(0.,0.,1.));+#4792 = PCURVE('',#167,#4793);+#4793 = DEFINITIONAL_REPRESENTATION('',(#4794),#4798);+#4794 = LINE('',#4795,#4796);+#4795 = CARTESIAN_POINT('',(3.974056290231,0.));+#4796 = VECTOR('',#4797,1.);+#4797 = DIRECTION('',(0.,1.));+#4798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4799 = PCURVE('',#1012,#4800);+#4800 = DEFINITIONAL_REPRESENTATION('',(#4801),#4805);+#4801 = LINE('',#4802,#4803);+#4802 = CARTESIAN_POINT('',(5.936554721235E-04,9.314404469578E-02));+#4803 = VECTOR('',#4804,1.);+#4804 = DIRECTION('',(0.,-1.));+#4805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4806 = ORIENTED_EDGE('',*,*,#973,.T.);+#4807 = ORIENTED_EDGE('',*,*,#4808,.T.);+#4808 = EDGE_CURVE('',#946,#4809,#4811,.T.);+#4809 = VERTEX_POINT('',#4810);+#4810 = CARTESIAN_POINT('',(0.,0.84544161632,9.314404469578E-02));+#4811 = SURFACE_CURVE('',#4812,(#4816,#4823),.PCURVE_S1.);+#4812 = LINE('',#4813,#4814);+#4813 = CARTESIAN_POINT('',(0.,0.84544161632,0.));+#4814 = VECTOR('',#4815,1.);+#4815 = DIRECTION('',(0.,0.,1.));+#4816 = PCURVE('',#167,#4817);+#4817 = DEFINITIONAL_REPRESENTATION('',(#4818),#4822);+#4818 = LINE('',#4819,#4820);+#4819 = CARTESIAN_POINT('',(3.65455838368,0.));+#4820 = VECTOR('',#4821,1.);+#4821 = DIRECTION('',(0.,1.));+#4822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4823 = PCURVE('',#961,#4824);+#4824 = DEFINITIONAL_REPRESENTATION('',(#4825),#4829);+#4825 = LINE('',#4826,#4827);+#4826 = CARTESIAN_POINT('',(5.936481650359E-04,-9.314404469578E-02));+#4827 = VECTOR('',#4828,1.);+#4828 = DIRECTION('',(0.,1.));+#4829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4830 = ORIENTED_EDGE('',*,*,#4831,.T.);+#4831 = EDGE_CURVE('',#4809,#4832,#4834,.T.);+#4832 = VERTEX_POINT('',#4833);+#4833 = CARTESIAN_POINT('',(0.,0.89598391805,9.314404469578E-02));+#4834 = SURFACE_CURVE('',#4835,(#4839,#4846),.PCURVE_S1.);+#4835 = LINE('',#4836,#4837);+#4836 = CARTESIAN_POINT('',(0.,0.84544161632,9.314404469578E-02));+#4837 = VECTOR('',#4838,1.);+#4838 = DIRECTION('',(0.,1.,0.));+#4839 = PCURVE('',#167,#4840);+#4840 = DEFINITIONAL_REPRESENTATION('',(#4841),#4845);+#4841 = LINE('',#4842,#4843);+#4842 = CARTESIAN_POINT('',(3.65455838368,9.314404469578E-02));+#4843 = VECTOR('',#4844,1.);+#4844 = DIRECTION('',(-1.,0.));+#4845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4846 = PCURVE('',#4255,#4847);+#4847 = DEFINITIONAL_REPRESENTATION('',(#4848),#4852);+#4848 = LINE('',#4849,#4850);+#4849 = CARTESIAN_POINT('',(-0.594729450677,-0.381014852668));+#4850 = VECTOR('',#4851,1.);+#4851 = DIRECTION('',(0.,1.));+#4852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4853 = ORIENTED_EDGE('',*,*,#4854,.F.);+#4854 = EDGE_CURVE('',#4855,#4832,#4857,.T.);+#4855 = VERTEX_POINT('',#4856);+#4856 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#4857 = SURFACE_CURVE('',#4858,(#4862,#4869),.PCURVE_S1.);+#4858 = LINE('',#4859,#4860);+#4859 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#4860 = VECTOR('',#4861,1.);+#4861 = DIRECTION('',(0.,0.,-1.));+#4862 = PCURVE('',#167,#4863);+#4863 = DEFINITIONAL_REPRESENTATION('',(#4864),#4868);+#4864 = LINE('',#4865,#4866);+#4865 = CARTESIAN_POINT('',(3.60401608195,0.193144044696));+#4866 = VECTOR('',#4867,1.);+#4867 = DIRECTION('',(0.,-1.));+#4868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4869 = PCURVE('',#4870,#4875);+#4870 = PLANE('',#4871);+#4871 = AXIS2_PLACEMENT_3D('',#4872,#4873,#4874);+#4872 = CARTESIAN_POINT('',(-7.574131513371E-02,0.89598391805,+ 0.193144044696));+#4873 = DIRECTION('',(0.,1.,0.));+#4874 = DIRECTION('',(1.,0.,0.));+#4875 = DEFINITIONAL_REPRESENTATION('',(#4876),#4880);+#4876 = LINE('',#4877,#4878);+#4877 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#4878 = VECTOR('',#4879,1.);+#4879 = DIRECTION('',(0.,1.));+#4880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4881 = ORIENTED_EDGE('',*,*,#4882,.T.);+#4882 = EDGE_CURVE('',#4855,#4883,#4885,.T.);+#4883 = VERTEX_POINT('',#4884);+#4884 = CARTESIAN_POINT('',(0.,0.975983918052,0.193144044696));+#4885 = SURFACE_CURVE('',#4886,(#4890,#4897),.PCURVE_S1.);+#4886 = LINE('',#4887,#4888);+#4887 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#4888 = VECTOR('',#4889,1.);+#4889 = DIRECTION('',(0.,1.,0.));+#4890 = PCURVE('',#167,#4891);+#4891 = DEFINITIONAL_REPRESENTATION('',(#4892),#4896);+#4892 = LINE('',#4893,#4894);+#4893 = CARTESIAN_POINT('',(3.60401608195,0.193144044696));+#4894 = VECTOR('',#4895,1.);+#4895 = DIRECTION('',(-1.,0.));+#4896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4897 = PCURVE('',#4898,#4903);+#4898 = PLANE('',#4899);+#4899 = AXIS2_PLACEMENT_3D('',#4900,#4901,#4902);+#4900 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+ ));+#4901 = DIRECTION('',(0.,0.,1.));+#4902 = DIRECTION('',(1.,0.,-0.));+#4903 = DEFINITIONAL_REPRESENTATION('',(#4904),#4908);+#4904 = LINE('',#4905,#4906);+#4905 = CARTESIAN_POINT('',(-0.687763226012,-0.355292602752));+#4906 = VECTOR('',#4907,1.);+#4907 = DIRECTION('',(0.,1.));+#4908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4909 = ORIENTED_EDGE('',*,*,#4910,.T.);+#4910 = EDGE_CURVE('',#4883,#4911,#4913,.T.);+#4911 = VERTEX_POINT('',#4912);+#4912 = CARTESIAN_POINT('',(0.,0.975983918052,9.314404469578E-02));+#4913 = SURFACE_CURVE('',#4914,(#4918,#4925),.PCURVE_S1.);+#4914 = LINE('',#4915,#4916);+#4915 = CARTESIAN_POINT('',(0.,0.975983918052,0.193144044696));+#4916 = VECTOR('',#4917,1.);+#4917 = DIRECTION('',(0.,0.,-1.));+#4918 = PCURVE('',#167,#4919);+#4919 = DEFINITIONAL_REPRESENTATION('',(#4920),#4924);+#4920 = LINE('',#4921,#4922);+#4921 = CARTESIAN_POINT('',(3.524016081948,0.193144044696));+#4922 = VECTOR('',#4923,1.);+#4923 = DIRECTION('',(0.,-1.));+#4924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4925 = PCURVE('',#4926,#4931);+#4926 = PLANE('',#4927);+#4927 = AXIS2_PLACEMENT_3D('',#4928,#4929,#4930);+#4928 = CARTESIAN_POINT('',(5.92586848756E-02,0.975983918052,+ 0.193144044696));+#4929 = DIRECTION('',(0.,-1.,0.));+#4930 = DIRECTION('',(-1.,0.,0.));+#4931 = DEFINITIONAL_REPRESENTATION('',(#4932),#4936);+#4932 = LINE('',#4933,#4934);+#4933 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#4934 = VECTOR('',#4935,1.);+#4935 = DIRECTION('',(0.,1.));+#4936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4937 = ORIENTED_EDGE('',*,*,#4938,.T.);+#4938 = EDGE_CURVE('',#4911,#4939,#4941,.T.);+#4939 = VERTEX_POINT('',#4940);+#4940 = CARTESIAN_POINT('',(0.,1.025943709769,9.314404469578E-02));+#4941 = SURFACE_CURVE('',#4942,(#4946,#4953),.PCURVE_S1.);+#4942 = LINE('',#4943,#4944);+#4943 = CARTESIAN_POINT('',(0.,0.975983918052,9.314404469578E-02));+#4944 = VECTOR('',#4945,1.);+#4945 = DIRECTION('',(0.,1.,0.));+#4946 = PCURVE('',#167,#4947);+#4947 = DEFINITIONAL_REPRESENTATION('',(#4948),#4952);+#4948 = LINE('',#4949,#4950);+#4949 = CARTESIAN_POINT('',(3.524016081948,9.314404469578E-02));+#4950 = VECTOR('',#4951,1.);+#4951 = DIRECTION('',(-1.,0.));+#4952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4953 = PCURVE('',#4255,#4954);+#4954 = DEFINITIONAL_REPRESENTATION('',(#4955),#4959);+#4955 = LINE('',#4956,#4957);+#4956 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550936));+#4957 = VECTOR('',#4958,1.);+#4958 = DIRECTION('',(0.,1.));+#4959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4960 = ORIENTED_EDGE('',*,*,#4961,.F.);+#4961 = EDGE_CURVE('',#747,#4939,#4962,.T.);+#4962 = SURFACE_CURVE('',#4963,(#4967,#4974),.PCURVE_S1.);+#4963 = LINE('',#4964,#4965);+#4964 = CARTESIAN_POINT('',(0.,1.025943709769,0.));+#4965 = VECTOR('',#4966,1.);+#4966 = DIRECTION('',(0.,0.,1.));+#4967 = PCURVE('',#167,#4968);+#4968 = DEFINITIONAL_REPRESENTATION('',(#4969),#4973);+#4969 = LINE('',#4970,#4971);+#4970 = CARTESIAN_POINT('',(3.474056290231,0.));+#4971 = VECTOR('',#4972,1.);+#4972 = DIRECTION('',(0.,1.));+#4973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4974 = PCURVE('',#785,#4975);+#4975 = DEFINITIONAL_REPRESENTATION('',(#4976),#4980);+#4976 = LINE('',#4977,#4978);+#4977 = CARTESIAN_POINT('',(5.936554721229E-04,9.314404469578E-02));+#4978 = VECTOR('',#4979,1.);+#4979 = DIRECTION('',(0.,-1.));+#4980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4981 = ORIENTED_EDGE('',*,*,#746,.T.);+#4982 = ORIENTED_EDGE('',*,*,#4983,.T.);+#4983 = EDGE_CURVE('',#714,#4984,#4986,.T.);+#4984 = VERTEX_POINT('',#4985);+#4985 = CARTESIAN_POINT('',(0.,1.345441613228,9.314404469578E-02));+#4986 = SURFACE_CURVE('',#4987,(#4991,#4998),.PCURVE_S1.);+#4987 = LINE('',#4988,#4989);+#4988 = CARTESIAN_POINT('',(0.,1.345441613228,0.));+#4989 = VECTOR('',#4990,1.);+#4990 = DIRECTION('',(0.,0.,1.));+#4991 = PCURVE('',#167,#4992);+#4992 = DEFINITIONAL_REPRESENTATION('',(#4993),#4997);+#4993 = LINE('',#4994,#4995);+#4994 = CARTESIAN_POINT('',(3.154558386772,0.));+#4995 = VECTOR('',#4996,1.);+#4996 = DIRECTION('',(0.,1.));+#4997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4998 = PCURVE('',#734,#4999);+#4999 = DEFINITIONAL_REPRESENTATION('',(#5000),#5004);+#5000 = LINE('',#5001,#5002);+#5001 = CARTESIAN_POINT('',(8.217107131147E-02,9.314404469578E-02));+#5002 = VECTOR('',#5003,1.);+#5003 = DIRECTION('',(0.,-1.));+#5004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5005 = ORIENTED_EDGE('',*,*,#5006,.T.);+#5006 = EDGE_CURVE('',#4984,#5007,#5009,.T.);+#5007 = VERTEX_POINT('',#5008);+#5008 = CARTESIAN_POINT('',(0.,1.395983918052,9.314404469578E-02));+#5009 = SURFACE_CURVE('',#5010,(#5014,#5021),.PCURVE_S1.);+#5010 = LINE('',#5011,#5012);+#5011 = CARTESIAN_POINT('',(0.,1.345441613228,9.314404469578E-02));+#5012 = VECTOR('',#5013,1.);+#5013 = DIRECTION('',(0.,1.,0.));+#5014 = PCURVE('',#167,#5015);+#5015 = DEFINITIONAL_REPRESENTATION('',(#5016),#5020);+#5016 = LINE('',#5017,#5018);+#5017 = CARTESIAN_POINT('',(3.154558386772,9.314404469578E-02));+#5018 = VECTOR('',#5019,1.);+#5019 = DIRECTION('',(-1.,0.));+#5020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5021 = PCURVE('',#4255,#5022);+#5022 = DEFINITIONAL_REPRESENTATION('',(#5023),#5027);+#5023 = LINE('',#5024,#5025);+#5024 = CARTESIAN_POINT('',(-0.594729450677,0.11898514424));+#5025 = VECTOR('',#5026,1.);+#5026 = DIRECTION('',(0.,1.));+#5027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5028 = ORIENTED_EDGE('',*,*,#5029,.F.);+#5029 = EDGE_CURVE('',#5030,#5007,#5032,.T.);+#5030 = VERTEX_POINT('',#5031);+#5031 = CARTESIAN_POINT('',(0.,1.395983918052,0.193144044696));+#5032 = SURFACE_CURVE('',#5033,(#5037,#5044),.PCURVE_S1.);+#5033 = LINE('',#5034,#5035);+#5034 = CARTESIAN_POINT('',(0.,1.395983918052,0.193144044696));+#5035 = VECTOR('',#5036,1.);+#5036 = DIRECTION('',(0.,0.,-1.));+#5037 = PCURVE('',#167,#5038);+#5038 = DEFINITIONAL_REPRESENTATION('',(#5039),#5043);+#5039 = LINE('',#5040,#5041);+#5040 = CARTESIAN_POINT('',(3.104016081948,0.193144044696));+#5041 = VECTOR('',#5042,1.);+#5042 = DIRECTION('',(0.,-1.));+#5043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5044 = PCURVE('',#5045,#5050);+#5045 = PLANE('',#5046);+#5046 = AXIS2_PLACEMENT_3D('',#5047,#5048,#5049);+#5047 = CARTESIAN_POINT('',(-7.574131513371E-02,1.395983918052,+ 0.193144044696));+#5048 = DIRECTION('',(0.,1.,0.));+#5049 = DIRECTION('',(1.,0.,0.));+#5050 = DEFINITIONAL_REPRESENTATION('',(#5051),#5055);+#5051 = LINE('',#5052,#5053);+#5052 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#5053 = VECTOR('',#5054,1.);+#5054 = DIRECTION('',(0.,1.));+#5055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5056 = ORIENTED_EDGE('',*,*,#5057,.T.);+#5057 = EDGE_CURVE('',#5030,#5058,#5060,.T.);+#5058 = VERTEX_POINT('',#5059);+#5059 = CARTESIAN_POINT('',(0.,1.47598391805,0.193144044696));+#5060 = SURFACE_CURVE('',#5061,(#5065,#5072),.PCURVE_S1.);+#5061 = LINE('',#5062,#5063);+#5062 = CARTESIAN_POINT('',(0.,1.395983918052,0.193144044696));+#5063 = VECTOR('',#5064,1.);+#5064 = DIRECTION('',(0.,1.,0.));+#5065 = PCURVE('',#167,#5066);+#5066 = DEFINITIONAL_REPRESENTATION('',(#5067),#5071);+#5067 = LINE('',#5068,#5069);+#5068 = CARTESIAN_POINT('',(3.104016081948,0.193144044696));+#5069 = VECTOR('',#5070,1.);+#5070 = DIRECTION('',(-1.,0.));+#5071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5072 = PCURVE('',#5073,#5078);+#5073 = PLANE('',#5074);+#5074 = AXIS2_PLACEMENT_3D('',#5075,#5076,#5077);+#5075 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+ ));+#5076 = DIRECTION('',(0.,0.,1.));+#5077 = DIRECTION('',(1.,0.,-0.));+#5078 = DEFINITIONAL_REPRESENTATION('',(#5079),#5083);+#5079 = LINE('',#5080,#5081);+#5080 = CARTESIAN_POINT('',(-0.687763226012,0.14470739725));+#5081 = VECTOR('',#5082,1.);+#5082 = DIRECTION('',(0.,1.));+#5083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5084 = ORIENTED_EDGE('',*,*,#5085,.T.);+#5085 = EDGE_CURVE('',#5058,#5086,#5088,.T.);+#5086 = VERTEX_POINT('',#5087);+#5087 = CARTESIAN_POINT('',(0.,1.47598391805,9.314404469578E-02));+#5088 = SURFACE_CURVE('',#5089,(#5093,#5100),.PCURVE_S1.);+#5089 = LINE('',#5090,#5091);+#5090 = CARTESIAN_POINT('',(0.,1.47598391805,0.193144044696));+#5091 = VECTOR('',#5092,1.);+#5092 = DIRECTION('',(0.,0.,-1.));+#5093 = PCURVE('',#167,#5094);+#5094 = DEFINITIONAL_REPRESENTATION('',(#5095),#5099);+#5095 = LINE('',#5096,#5097);+#5096 = CARTESIAN_POINT('',(3.02401608195,0.193144044696));+#5097 = VECTOR('',#5098,1.);+#5098 = DIRECTION('',(0.,-1.));+#5099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5100 = PCURVE('',#5101,#5106);+#5101 = PLANE('',#5102);+#5102 = AXIS2_PLACEMENT_3D('',#5103,#5104,#5105);+#5103 = CARTESIAN_POINT('',(5.92586848756E-02,1.47598391805,+ 0.193144044696));+#5104 = DIRECTION('',(0.,-1.,0.));+#5105 = DIRECTION('',(-1.,0.,0.));+#5106 = DEFINITIONAL_REPRESENTATION('',(#5107),#5111);+#5107 = LINE('',#5108,#5109);+#5108 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#5109 = VECTOR('',#5110,1.);+#5110 = DIRECTION('',(0.,1.));+#5111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5112 = ORIENTED_EDGE('',*,*,#5113,.T.);+#5113 = EDGE_CURVE('',#5086,#5114,#5116,.T.);+#5114 = VERTEX_POINT('',#5115);+#5115 = CARTESIAN_POINT('',(0.,1.525943709769,9.314404469578E-02));+#5116 = SURFACE_CURVE('',#5117,(#5121,#5128),.PCURVE_S1.);+#5117 = LINE('',#5118,#5119);+#5118 = CARTESIAN_POINT('',(0.,1.47598391805,9.314404469578E-02));+#5119 = VECTOR('',#5120,1.);+#5120 = DIRECTION('',(0.,1.,0.));+#5121 = PCURVE('',#167,#5122);+#5122 = DEFINITIONAL_REPRESENTATION('',(#5123),#5127);+#5123 = LINE('',#5124,#5125);+#5124 = CARTESIAN_POINT('',(3.02401608195,9.314404469578E-02));+#5125 = VECTOR('',#5126,1.);+#5126 = DIRECTION('',(-1.,0.));+#5127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5128 = PCURVE('',#4255,#5129);+#5129 = DEFINITIONAL_REPRESENTATION('',(#5130),#5134);+#5130 = LINE('',#5131,#5132);+#5131 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#5132 = VECTOR('',#5133,1.);+#5133 = DIRECTION('',(0.,1.));+#5134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5135 = ORIENTED_EDGE('',*,*,#5136,.F.);+#5136 = EDGE_CURVE('',#576,#5114,#5137,.T.);+#5137 = SURFACE_CURVE('',#5138,(#5142,#5149),.PCURVE_S1.);+#5138 = LINE('',#5139,#5140);+#5139 = CARTESIAN_POINT('',(0.,1.525943709769,0.));+#5140 = VECTOR('',#5141,1.);+#5141 = DIRECTION('',(0.,0.,1.));+#5142 = PCURVE('',#167,#5143);+#5143 = DEFINITIONAL_REPRESENTATION('',(#5144),#5148);+#5144 = LINE('',#5145,#5146);+#5145 = CARTESIAN_POINT('',(2.974056290231,0.));+#5146 = VECTOR('',#5147,1.);+#5147 = DIRECTION('',(0.,1.));+#5148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5149 = PCURVE('',#614,#5150);+#5150 = DEFINITIONAL_REPRESENTATION('',(#5151),#5155);+#5151 = LINE('',#5152,#5153);+#5152 = CARTESIAN_POINT('',(5.936554716993E-04,9.314404469578E-02));+#5153 = VECTOR('',#5154,1.);+#5154 = DIRECTION('',(0.,-1.));+#5155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5156 = ORIENTED_EDGE('',*,*,#575,.T.);+#5157 = ORIENTED_EDGE('',*,*,#4194,.T.);+#5158 = ORIENTED_EDGE('',*,*,#5159,.T.);+#5159 = EDGE_CURVE('',#4195,#5160,#5162,.T.);+#5160 = VERTEX_POINT('',#5161);+#5161 = CARTESIAN_POINT('',(0.,1.895983918053,9.314404469578E-02));+#5162 = SURFACE_CURVE('',#5163,(#5167,#5174),.PCURVE_S1.);+#5163 = LINE('',#5164,#5165);+#5164 = CARTESIAN_POINT('',(0.,1.845441613228,9.314404469578E-02));+#5165 = VECTOR('',#5166,1.);+#5166 = DIRECTION('',(0.,1.,0.));+#5167 = PCURVE('',#167,#5168);+#5168 = DEFINITIONAL_REPRESENTATION('',(#5169),#5173);+#5169 = LINE('',#5170,#5171);+#5170 = CARTESIAN_POINT('',(2.654558386772,9.314404469578E-02));+#5171 = VECTOR('',#5172,1.);+#5172 = DIRECTION('',(-1.,0.));+#5173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5174 = PCURVE('',#4255,#5175);+#5175 = DEFINITIONAL_REPRESENTATION('',(#5176),#5180);+#5176 = LINE('',#5177,#5178);+#5177 = CARTESIAN_POINT('',(-0.594729450677,0.61898514424));+#5178 = VECTOR('',#5179,1.);+#5179 = DIRECTION('',(0.,1.));+#5180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5181 = ORIENTED_EDGE('',*,*,#5182,.F.);+#5182 = EDGE_CURVE('',#5183,#5160,#5185,.T.);+#5183 = VERTEX_POINT('',#5184);+#5184 = CARTESIAN_POINT('',(0.,1.895983918053,0.193144044696));+#5185 = SURFACE_CURVE('',#5186,(#5190,#5197),.PCURVE_S1.);+#5186 = LINE('',#5187,#5188);+#5187 = CARTESIAN_POINT('',(0.,1.895983918053,0.193144044696));+#5188 = VECTOR('',#5189,1.);+#5189 = DIRECTION('',(0.,0.,-1.));+#5190 = PCURVE('',#167,#5191);+#5191 = DEFINITIONAL_REPRESENTATION('',(#5192),#5196);+#5192 = LINE('',#5193,#5194);+#5193 = CARTESIAN_POINT('',(2.604016081947,0.193144044696));+#5194 = VECTOR('',#5195,1.);+#5195 = DIRECTION('',(0.,-1.));+#5196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5197 = PCURVE('',#5198,#5203);+#5198 = PLANE('',#5199);+#5199 = AXIS2_PLACEMENT_3D('',#5200,#5201,#5202);+#5200 = CARTESIAN_POINT('',(-7.574131513371E-02,1.895983918053,+ 0.193144044696));+#5201 = DIRECTION('',(0.,1.,0.));+#5202 = DIRECTION('',(1.,0.,0.));+#5203 = DEFINITIONAL_REPRESENTATION('',(#5204),#5208);+#5204 = LINE('',#5205,#5206);+#5205 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#5206 = VECTOR('',#5207,1.);+#5207 = DIRECTION('',(0.,1.));+#5208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5209 = ORIENTED_EDGE('',*,*,#5210,.T.);+#5210 = EDGE_CURVE('',#5183,#5211,#5213,.T.);+#5211 = VERTEX_POINT('',#5212);+#5212 = CARTESIAN_POINT('',(0.,1.975983918052,0.193144044696));+#5213 = SURFACE_CURVE('',#5214,(#5218,#5225),.PCURVE_S1.);+#5214 = LINE('',#5215,#5216);+#5215 = CARTESIAN_POINT('',(0.,1.895983918053,0.193144044696));+#5216 = VECTOR('',#5217,1.);+#5217 = DIRECTION('',(0.,1.,0.));+#5218 = PCURVE('',#167,#5219);+#5219 = DEFINITIONAL_REPRESENTATION('',(#5220),#5224);+#5220 = LINE('',#5221,#5222);+#5221 = CARTESIAN_POINT('',(2.604016081947,0.193144044696));+#5222 = VECTOR('',#5223,1.);+#5223 = DIRECTION('',(-1.,0.));+#5224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5225 = PCURVE('',#5226,#5231);+#5226 = PLANE('',#5227);+#5227 = AXIS2_PLACEMENT_3D('',#5228,#5229,#5230);+#5228 = CARTESIAN_POINT('',(0.687763226012,1.251276520802,0.193144044696+ ));+#5229 = DIRECTION('',(0.,0.,1.));+#5230 = DIRECTION('',(1.,0.,-0.));+#5231 = DEFINITIONAL_REPRESENTATION('',(#5232),#5236);+#5232 = LINE('',#5233,#5234);+#5233 = CARTESIAN_POINT('',(-0.687763226012,0.644707397251));+#5234 = VECTOR('',#5235,1.);+#5235 = DIRECTION('',(0.,1.));+#5236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5237 = ORIENTED_EDGE('',*,*,#5238,.T.);+#5238 = EDGE_CURVE('',#5211,#5239,#5241,.T.);+#5239 = VERTEX_POINT('',#5240);+#5240 = CARTESIAN_POINT('',(0.,1.975983918052,9.314404469578E-02));+#5241 = SURFACE_CURVE('',#5242,(#5246,#5253),.PCURVE_S1.);+#5242 = LINE('',#5243,#5244);+#5243 = CARTESIAN_POINT('',(0.,1.975983918052,0.193144044696));+#5244 = VECTOR('',#5245,1.);+#5245 = DIRECTION('',(0.,0.,-1.));+#5246 = PCURVE('',#167,#5247);+#5247 = DEFINITIONAL_REPRESENTATION('',(#5248),#5252);+#5248 = LINE('',#5249,#5250);+#5249 = CARTESIAN_POINT('',(2.524016081948,0.193144044696));+#5250 = VECTOR('',#5251,1.);+#5251 = DIRECTION('',(0.,-1.));+#5252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5253 = PCURVE('',#5254,#5259);+#5254 = PLANE('',#5255);+#5255 = AXIS2_PLACEMENT_3D('',#5256,#5257,#5258);+#5256 = CARTESIAN_POINT('',(5.92586848756E-02,1.975983918052,+ 0.193144044696));+#5257 = DIRECTION('',(0.,-1.,0.));+#5258 = DIRECTION('',(-1.,0.,0.));+#5259 = DEFINITIONAL_REPRESENTATION('',(#5260),#5264);+#5260 = LINE('',#5261,#5262);+#5261 = CARTESIAN_POINT('',(5.92586848756E-02,0.));+#5262 = VECTOR('',#5263,1.);+#5263 = DIRECTION('',(0.,1.));+#5264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5265 = ORIENTED_EDGE('',*,*,#5266,.T.);+#5266 = EDGE_CURVE('',#5239,#5267,#5269,.T.);+#5267 = VERTEX_POINT('',#5268);+#5268 = CARTESIAN_POINT('',(0.,2.025943709769,9.314404469578E-02));+#5269 = SURFACE_CURVE('',#5270,(#5274,#5281),.PCURVE_S1.);+#5270 = LINE('',#5271,#5272);+#5271 = CARTESIAN_POINT('',(0.,1.975983918052,9.314404469578E-02));+#5272 = VECTOR('',#5273,1.);+#5273 = DIRECTION('',(0.,1.,0.));+#5274 = PCURVE('',#167,#5275);+#5275 = DEFINITIONAL_REPRESENTATION('',(#5276),#5280);+#5276 = LINE('',#5277,#5278);+#5277 = CARTESIAN_POINT('',(2.524016081948,9.314404469578E-02));+#5278 = VECTOR('',#5279,1.);+#5279 = DIRECTION('',(-1.,0.));+#5280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5281 = PCURVE('',#4255,#5282);+#5282 = DEFINITIONAL_REPRESENTATION('',(#5283),#5287);+#5283 = LINE('',#5284,#5285);+#5284 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#5285 = VECTOR('',#5286,1.);+#5286 = DIRECTION('',(0.,1.));+#5287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5288 = ORIENTED_EDGE('',*,*,#5289,.F.);+#5289 = EDGE_CURVE('',#2899,#5267,#5290,.T.);+#5290 = SURFACE_CURVE('',#5291,(#5295,#5302),.PCURVE_S1.);+#5291 = LINE('',#5292,#5293);+#5292 = CARTESIAN_POINT('',(0.,2.025943709769,0.));+#5293 = VECTOR('',#5294,1.);+#5294 = DIRECTION('',(0.,0.,1.));+#5295 = PCURVE('',#167,#5296);+#5296 = DEFINITIONAL_REPRESENTATION('',(#5297),#5301);+#5297 = LINE('',#5298,#5299);+#5298 = CARTESIAN_POINT('',(2.474056290231,0.));+#5299 = VECTOR('',#5300,1.);+#5300 = DIRECTION('',(0.,1.));+#5301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5302 = PCURVE('',#2937,#5303);+#5303 = DEFINITIONAL_REPRESENTATION('',(#5304),#5308);+#5304 = LINE('',#5305,#5306);+#5305 = CARTESIAN_POINT('',(5.936554716987E-04,9.314404469578E-02));+#5306 = VECTOR('',#5307,1.);+#5307 = DIRECTION('',(0.,-1.));+#5308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5309 = ORIENTED_EDGE('',*,*,#2898,.T.);+#5310 = ORIENTED_EDGE('',*,*,#5311,.T.);+#5311 = EDGE_CURVE('',#2871,#5312,#5314,.T.);+#5312 = VERTEX_POINT('',#5313);+#5313 = CARTESIAN_POINT('',(0.,2.795441613227,9.314404469578E-02));+#5314 = SURFACE_CURVE('',#5315,(#5319,#5326),.PCURVE_S1.);+#5315 = LINE('',#5316,#5317);+#5316 = CARTESIAN_POINT('',(0.,2.795441613227,0.));+#5317 = VECTOR('',#5318,1.);+#5318 = DIRECTION('',(0.,0.,1.));+#5319 = PCURVE('',#167,#5320);+#5320 = DEFINITIONAL_REPRESENTATION('',(#5321),#5325);+#5321 = LINE('',#5322,#5323);+#5322 = CARTESIAN_POINT('',(1.704558386773,0.));+#5323 = VECTOR('',#5324,1.);+#5324 = DIRECTION('',(0.,1.));+#5325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5326 = PCURVE('',#2886,#5327);+#5327 = DEFINITIONAL_REPRESENTATION('',(#5328),#5332);+#5328 = LINE('',#5329,#5330);+#5329 = CARTESIAN_POINT('',(5.936554716977E-04,-9.314404469578E-02));+#5330 = VECTOR('',#5331,1.);+#5331 = DIRECTION('',(0.,1.));+#5332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5333 = ORIENTED_EDGE('',*,*,#5334,.T.);+#5334 = EDGE_CURVE('',#5312,#5335,#5337,.T.);+#5335 = VERTEX_POINT('',#5336);+#5336 = CARTESIAN_POINT('',(0.,2.845983916501,9.314404469578E-02));+#5337 = SURFACE_CURVE('',#5338,(#5342,#5349),.PCURVE_S1.);+#5338 = LINE('',#5339,#5340);+#5339 = CARTESIAN_POINT('',(0.,2.795441613227,9.314404469578E-02));+#5340 = VECTOR('',#5341,1.);+#5341 = DIRECTION('',(0.,1.,0.));+#5342 = PCURVE('',#167,#5343);+#5343 = DEFINITIONAL_REPRESENTATION('',(#5344),#5348);+#5344 = LINE('',#5345,#5346);+#5345 = CARTESIAN_POINT('',(1.704558386773,9.314404469578E-02));+#5346 = VECTOR('',#5347,1.);+#5347 = DIRECTION('',(-1.,0.));+#5348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5349 = PCURVE('',#5350,#5355);+#5350 = PLANE('',#5351);+#5351 = AXIS2_PLACEMENT_3D('',#5352,#5353,#5354);+#5352 = CARTESIAN_POINT('',(0.417539932793,2.885692661811,+ 9.314404469578E-02));+#5353 = DIRECTION('',(0.,0.,1.));+#5354 = DIRECTION('',(1.,0.,-0.));+#5355 = DEFINITIONAL_REPRESENTATION('',(#5356),#5360);+#5356 = LINE('',#5357,#5358);+#5357 = CARTESIAN_POINT('',(-0.417539932793,-9.0251048584E-02));+#5358 = VECTOR('',#5359,1.);+#5359 = DIRECTION('',(0.,1.));+#5360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5361 = ORIENTED_EDGE('',*,*,#5362,.F.);+#5362 = EDGE_CURVE('',#5363,#5335,#5365,.T.);+#5363 = VERTEX_POINT('',#5364);+#5364 = CARTESIAN_POINT('',(0.,2.845983916501,0.193144044696));+#5365 = SURFACE_CURVE('',#5366,(#5370,#5377),.PCURVE_S1.);+#5366 = LINE('',#5367,#5368);+#5367 = CARTESIAN_POINT('',(0.,2.845983916501,0.193144044696));+#5368 = VECTOR('',#5369,1.);+#5369 = DIRECTION('',(0.,0.,-1.));+#5370 = PCURVE('',#167,#5371);+#5371 = DEFINITIONAL_REPRESENTATION('',(#5372),#5376);+#5372 = LINE('',#5373,#5374);+#5373 = CARTESIAN_POINT('',(1.654016083499,0.193144044696));+#5374 = VECTOR('',#5375,1.);+#5375 = DIRECTION('',(0.,-1.));+#5376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5377 = PCURVE('',#5378,#5383);+#5378 = PLANE('',#5379);+#5379 = AXIS2_PLACEMENT_3D('',#5380,#5381,#5382);+#5380 = CARTESIAN_POINT('',(-7.574131842608E-02,2.845983916501,+ 0.193144044696));+#5381 = DIRECTION('',(0.,1.,0.));+#5382 = DIRECTION('',(1.,0.,0.));+#5383 = DEFINITIONAL_REPRESENTATION('',(#5384),#5388);+#5384 = LINE('',#5385,#5386);+#5385 = CARTESIAN_POINT('',(7.574131842608E-02,0.));+#5386 = VECTOR('',#5387,1.);+#5387 = DIRECTION('',(0.,1.));+#5388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5389 = ORIENTED_EDGE('',*,*,#5390,.T.);+#5390 = EDGE_CURVE('',#5363,#5391,#5393,.T.);+#5391 = VERTEX_POINT('',#5392);+#5392 = CARTESIAN_POINT('',(0.,2.925983916503,0.193144044696));+#5393 = SURFACE_CURVE('',#5394,(#5398,#5405),.PCURVE_S1.);+#5394 = LINE('',#5395,#5396);+#5395 = CARTESIAN_POINT('',(0.,2.845983916501,0.193144044696));+#5396 = VECTOR('',#5397,1.);+#5397 = DIRECTION('',(0.,1.,0.));+#5398 = PCURVE('',#167,#5399);+#5399 = DEFINITIONAL_REPRESENTATION('',(#5400),#5404);+#5400 = LINE('',#5401,#5402);+#5401 = CARTESIAN_POINT('',(1.654016083499,0.193144044696));+#5402 = VECTOR('',#5403,1.);+#5403 = DIRECTION('',(-1.,0.));+#5404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5405 = PCURVE('',#5406,#5411);+#5406 = PLANE('',#5407);+#5407 = AXIS2_PLACEMENT_3D('',#5408,#5409,#5410);+#5408 = CARTESIAN_POINT('',(0.820529093186,2.871666071784,0.193144044696+ ));+#5409 = DIRECTION('',(0.,0.,1.));+#5410 = DIRECTION('',(1.,0.,-0.));+#5411 = DEFINITIONAL_REPRESENTATION('',(#5412),#5416);+#5412 = LINE('',#5413,#5414);+#5413 = CARTESIAN_POINT('',(-0.820529093186,-2.5682155283E-02));+#5414 = VECTOR('',#5415,1.);+#5415 = DIRECTION('',(0.,1.));+#5416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5417 = ORIENTED_EDGE('',*,*,#5418,.T.);+#5418 = EDGE_CURVE('',#5391,#5419,#5421,.T.);+#5419 = VERTEX_POINT('',#5420);+#5420 = CARTESIAN_POINT('',(0.,2.925983916503,9.314404469578E-02));+#5421 = SURFACE_CURVE('',#5422,(#5426,#5433),.PCURVE_S1.);+#5422 = LINE('',#5423,#5424);+#5423 = CARTESIAN_POINT('',(0.,2.925983916503,0.193144044696));+#5424 = VECTOR('',#5425,1.);+#5425 = DIRECTION('',(0.,0.,-1.));+#5426 = PCURVE('',#167,#5427);+#5427 = DEFINITIONAL_REPRESENTATION('',(#5428),#5432);+#5428 = LINE('',#5429,#5430);+#5429 = CARTESIAN_POINT('',(1.574016083497,0.193144044696));+#5430 = VECTOR('',#5431,1.);+#5431 = DIRECTION('',(0.,-1.));+#5432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5433 = PCURVE('',#5434,#5439);+#5434 = PLANE('',#5435);+#5435 = AXIS2_PLACEMENT_3D('',#5436,#5437,#5438);+#5436 = CARTESIAN_POINT('',(5.925868158323E-02,2.925983916503,+ 0.193144044696));+#5437 = DIRECTION('',(0.,-1.,0.));+#5438 = DIRECTION('',(-1.,0.,0.));+#5439 = DEFINITIONAL_REPRESENTATION('',(#5440),#5444);+#5440 = LINE('',#5441,#5442);+#5441 = CARTESIAN_POINT('',(5.925868158323E-02,0.));+#5442 = VECTOR('',#5443,1.);+#5443 = DIRECTION('',(0.,1.));+#5444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5445 = ORIENTED_EDGE('',*,*,#5446,.T.);+#5446 = EDGE_CURVE('',#5419,#5447,#5449,.T.);+#5447 = VERTEX_POINT('',#5448);+#5448 = CARTESIAN_POINT('',(0.,2.975943712833,9.314404469578E-02));+#5449 = SURFACE_CURVE('',#5450,(#5454,#5461),.PCURVE_S1.);+#5450 = LINE('',#5451,#5452);+#5451 = CARTESIAN_POINT('',(0.,2.925983916503,9.314404469578E-02));+#5452 = VECTOR('',#5453,1.);+#5453 = DIRECTION('',(0.,1.,0.));+#5454 = PCURVE('',#167,#5455);+#5455 = DEFINITIONAL_REPRESENTATION('',(#5456),#5460);+#5456 = LINE('',#5457,#5458);+#5457 = CARTESIAN_POINT('',(1.574016083497,9.314404469578E-02));+#5458 = VECTOR('',#5459,1.);+#5459 = DIRECTION('',(-1.,0.));+#5460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5461 = PCURVE('',#5350,#5462);+#5462 = DEFINITIONAL_REPRESENTATION('',(#5463),#5467);+#5463 = LINE('',#5464,#5465);+#5464 = CARTESIAN_POINT('',(-0.417539932793,4.0291254692E-02));+#5465 = VECTOR('',#5466,1.);+#5466 = DIRECTION('',(0.,1.));+#5467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5468 = ORIENTED_EDGE('',*,*,#5469,.F.);+#5469 = EDGE_CURVE('',#2731,#5447,#5470,.T.);+#5470 = SURFACE_CURVE('',#5471,(#5475,#5482),.PCURVE_S1.);+#5471 = LINE('',#5472,#5473);+#5472 = CARTESIAN_POINT('',(0.,2.975943712833,0.));+#5473 = VECTOR('',#5474,1.);+#5474 = DIRECTION('',(0.,0.,1.));+#5475 = PCURVE('',#167,#5476);+#5476 = DEFINITIONAL_REPRESENTATION('',(#5477),#5481);+#5477 = LINE('',#5478,#5479);+#5478 = CARTESIAN_POINT('',(1.524056287167,0.));+#5479 = VECTOR('',#5480,1.);+#5480 = DIRECTION('',(0.,1.));+#5481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5482 = PCURVE('',#2769,#5483);+#5483 = DEFINITIONAL_REPRESENTATION('',(#5484),#5488);+#5484 = LINE('',#5485,#5486);+#5485 = CARTESIAN_POINT('',(5.936627694821E-04,9.314404469578E-02));+#5486 = VECTOR('',#5487,1.);+#5487 = DIRECTION('',(0.,-1.));+#5488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5489 = ORIENTED_EDGE('',*,*,#2730,.T.);+#5490 = ORIENTED_EDGE('',*,*,#5491,.T.);+#5491 = EDGE_CURVE('',#2703,#4271,#5492,.T.);+#5492 = SURFACE_CURVE('',#5493,(#5497,#5504),.PCURVE_S1.);+#5493 = LINE('',#5494,#5495);+#5494 = CARTESIAN_POINT('',(0.,3.295441613229,0.));+#5495 = VECTOR('',#5496,1.);+#5496 = DIRECTION('',(0.,0.,1.));+#5497 = PCURVE('',#167,#5498);+#5498 = DEFINITIONAL_REPRESENTATION('',(#5499),#5503);+#5499 = LINE('',#5500,#5501);+#5500 = CARTESIAN_POINT('',(1.204558386771,0.));+#5501 = VECTOR('',#5502,1.);+#5502 = DIRECTION('',(0.,1.));+#5503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5504 = PCURVE('',#2718,#5505);+#5505 = DEFINITIONAL_REPRESENTATION('',(#5506),#5510);+#5506 = LINE('',#5507,#5508);+#5507 = CARTESIAN_POINT('',(5.936554716971E-04,-9.314404469578E-02));+#5508 = VECTOR('',#5509,1.);+#5509 = DIRECTION('',(0.,1.));+#5510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5511 = ADVANCED_FACE('',(#5512),#4288,.F.);+#5512 = FACE_BOUND('',#5513,.F.);+#5513 = EDGE_LOOP('',(#5514,#5515,#5538,#5561,#5589,#5612,#5633,#5634,+ #5657,#5685));+#5514 = ORIENTED_EDGE('',*,*,#4270,.F.);+#5515 = ORIENTED_EDGE('',*,*,#5516,.F.);+#5516 = EDGE_CURVE('',#5517,#4271,#5519,.T.);+#5517 = VERTEX_POINT('',#5518);+#5518 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+ 9.314404469578E-02));+#5519 = SURFACE_CURVE('',#5520,(#5524,#5531),.PCURVE_S1.);+#5520 = LINE('',#5521,#5522);+#5521 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+ 9.314404469578E-02));+#5522 = VECTOR('',#5523,1.);+#5523 = DIRECTION('',(-0.906183139956,0.422885465415,0.));+#5524 = PCURVE('',#4288,#5525);+#5525 = DEFINITIONAL_REPRESENTATION('',(#5526),#5530);+#5526 = LINE('',#5527,#5528);+#5527 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000319));+#5528 = VECTOR('',#5529,1.);+#5529 = DIRECTION('',(-0.906183139956,0.422885465415));+#5530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5531 = PCURVE('',#2718,#5532);+#5532 = DEFINITIONAL_REPRESENTATION('',(#5533),#5537);+#5533 = LINE('',#5534,#5535);+#5534 = CARTESIAN_POINT('',(8.276472678656E-02,0.));+#5535 = VECTOR('',#5536,1.);+#5536 = DIRECTION('',(-1.,0.));+#5537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5538 = ORIENTED_EDGE('',*,*,#5539,.T.);+#5539 = EDGE_CURVE('',#5517,#5540,#5542,.T.);+#5540 = VERTEX_POINT('',#5541);+#5541 = CARTESIAN_POINT('',(0.774462032802,3.260692661495,+ 9.314404469578E-02));+#5542 = SURFACE_CURVE('',#5543,(#5547,#5554),.PCURVE_S1.);+#5543 = LINE('',#5544,#5545);+#5544 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+ 9.314404469578E-02));+#5545 = VECTOR('',#5546,1.);+#5546 = DIRECTION('',(1.,1.298009331309E-12,0.));+#5547 = PCURVE('',#4288,#5548);+#5548 = DEFINITIONAL_REPRESENTATION('',(#5549),#5553);+#5549 = LINE('',#5550,#5551);+#5550 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000319));+#5551 = VECTOR('',#5552,1.);+#5552 = DIRECTION('',(1.,1.298009331309E-12));+#5553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5554 = PCURVE('',#2690,#5555);+#5555 = DEFINITIONAL_REPRESENTATION('',(#5556),#5560);+#5556 = LINE('',#5557,#5558);+#5557 = CARTESIAN_POINT('',(0.,0.));+#5558 = VECTOR('',#5559,1.);+#5559 = DIRECTION('',(1.,0.));+#5560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5561 = ORIENTED_EDGE('',*,*,#5562,.F.);+#5562 = EDGE_CURVE('',#5563,#5540,#5565,.T.);+#5563 = VERTEX_POINT('',#5564);+#5564 = CARTESIAN_POINT('',(0.774462032802,3.510692661495,+ 9.314404469578E-02));+#5565 = SURFACE_CURVE('',#5566,(#5571,#5582),.PCURVE_S1.);+#5566 = CIRCLE('',#5567,0.125);+#5567 = AXIS2_PLACEMENT_3D('',#5568,#5569,#5570);+#5568 = CARTESIAN_POINT('',(0.77446203283,3.385692661495,+ 9.314404469578E-02));+#5569 = DIRECTION('',(0.,0.,-1.));+#5570 = DIRECTION('',(-2.217284134076E-10,1.,0.));+#5571 = PCURVE('',#4288,#5572);+#5572 = DEFINITIONAL_REPRESENTATION('',(#5573),#5581);+#5573 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5574,#5575,#5576,#5577,+#5578,#5579,#5580),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5574 = CARTESIAN_POINT('',(0.356922100009,0.124999999684));+#5575 = CARTESIAN_POINT('',(0.573428450955,0.124999999732));+#5576 = CARTESIAN_POINT('',(0.465175275524,-6.2500000292E-02));+#5577 = CARTESIAN_POINT('',(0.356922100092,-0.250000000316));+#5578 = CARTESIAN_POINT('',(0.248668924578,-6.250000034E-02));+#5579 = CARTESIAN_POINT('',(0.140415749063,0.124999999636));+#5580 = CARTESIAN_POINT('',(0.356922100009,0.124999999684));+#5581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5582 = PCURVE('',#2662,#5583);+#5583 = DEFINITIONAL_REPRESENTATION('',(#5584),#5588);+#5584 = LINE('',#5585,#5586);+#5585 = CARTESIAN_POINT('',(0.,0.));+#5586 = VECTOR('',#5587,1.);+#5587 = DIRECTION('',(1.,0.));+#5588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5589 = ORIENTED_EDGE('',*,*,#5590,.T.);+#5590 = EDGE_CURVE('',#5563,#5591,#5593,.T.);+#5591 = VERTEX_POINT('',#5592);+#5592 = CARTESIAN_POINT('',(7.446203942479E-02,3.510692661498,+ 9.314404469578E-02));+#5593 = SURFACE_CURVE('',#5594,(#5598,#5605),.PCURVE_S1.);+#5594 = LINE('',#5595,#5596);+#5595 = CARTESIAN_POINT('',(0.774462032821,3.510692661497,+ 9.314404469578E-02));+#5596 = VECTOR('',#5597,1.);+#5597 = DIRECTION('',(-1.,1.300546983974E-12,0.));+#5598 = PCURVE('',#4288,#5599);+#5599 = DEFINITIONAL_REPRESENTATION('',(#5600),#5604);+#5600 = LINE('',#5601,#5602);+#5601 = CARTESIAN_POINT('',(0.356922100028,0.124999999686));+#5602 = VECTOR('',#5603,1.);+#5603 = DIRECTION('',(-1.,1.300546983974E-12));+#5604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5605 = PCURVE('',#2629,#5606);+#5606 = DEFINITIONAL_REPRESENTATION('',(#5607),#5611);+#5607 = LINE('',#5608,#5609);+#5608 = CARTESIAN_POINT('',(-0.624999993425,0.));+#5609 = VECTOR('',#5610,1.);+#5610 = DIRECTION('',(1.,0.));+#5611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5612 = ORIENTED_EDGE('',*,*,#5613,.F.);+#5613 = EDGE_CURVE('',#4385,#5591,#5614,.T.);+#5614 = SURFACE_CURVE('',#5615,(#5619,#5626),.PCURVE_S1.);+#5615 = LINE('',#5616,#5617);+#5616 = CARTESIAN_POINT('',(0.,3.475943712833,9.314404469578E-02));+#5617 = VECTOR('',#5618,1.);+#5618 = DIRECTION('',(0.906183154297,0.422885434685,0.));+#5619 = PCURVE('',#4288,#5620);+#5620 = DEFINITIONAL_REPRESENTATION('',(#5621),#5625);+#5621 = LINE('',#5622,#5623);+#5622 = CARTESIAN_POINT('',(-0.417539932793,9.0251051022E-02));+#5623 = VECTOR('',#5624,1.);+#5624 = DIRECTION('',(0.906183154297,0.422885434685));+#5625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5626 = PCURVE('',#2601,#5627);+#5627 = DEFINITIONAL_REPRESENTATION('',(#5628),#5632);+#5628 = LINE('',#5629,#5630);+#5629 = CARTESIAN_POINT('',(5.936627694815E-04,0.));+#5630 = VECTOR('',#5631,1.);+#5631 = DIRECTION('',(1.,0.));+#5632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5633 = ORIENTED_EDGE('',*,*,#4384,.F.);+#5634 = ORIENTED_EDGE('',*,*,#5635,.T.);+#5635 = EDGE_CURVE('',#4357,#5636,#5638,.T.);+#5636 = VERTEX_POINT('',#5637);+#5637 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+ 9.314404469578E-02));+#5638 = SURFACE_CURVE('',#5639,(#5643,#5650),.PCURVE_S1.);+#5639 = LINE('',#5640,#5641);+#5640 = CARTESIAN_POINT('',(0.,3.425983916501,9.314404469578E-02));+#5641 = VECTOR('',#5642,1.);+#5642 = DIRECTION('',(1.,0.,0.));+#5643 = PCURVE('',#4288,#5644);+#5644 = DEFINITIONAL_REPRESENTATION('',(#5645),#5649);+#5645 = LINE('',#5646,#5647);+#5646 = CARTESIAN_POINT('',(-0.417539932793,4.029125469E-02));+#5647 = VECTOR('',#5648,1.);+#5648 = DIRECTION('',(1.,0.));+#5649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5650 = PCURVE('',#4372,#5651);+#5651 = DEFINITIONAL_REPRESENTATION('',(#5652),#5656);+#5652 = LINE('',#5653,#5654);+#5653 = CARTESIAN_POINT('',(5.925868158323E-02,0.1));+#5654 = VECTOR('',#5655,1.);+#5655 = DIRECTION('',(-1.,-0.));+#5656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5657 = ORIENTED_EDGE('',*,*,#5658,.T.);+#5658 = EDGE_CURVE('',#5636,#5659,#5661,.T.);+#5659 = VERTEX_POINT('',#5660);+#5660 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+ 9.314404469578E-02));+#5661 = SURFACE_CURVE('',#5662,(#5666,#5673),.PCURVE_S1.);+#5662 = LINE('',#5663,#5664);+#5663 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+ 9.314404469578E-02));+#5664 = VECTOR('',#5665,1.);+#5665 = DIRECTION('',(0.,-1.,0.));+#5666 = PCURVE('',#4288,#5667);+#5667 = DEFINITIONAL_REPRESENTATION('',(#5668),#5672);+#5668 = LINE('',#5669,#5670);+#5669 = CARTESIAN_POINT('',(-0.375396759096,4.029125469E-02));+#5670 = VECTOR('',#5671,1.);+#5671 = DIRECTION('',(0.,-1.));+#5672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5673 = PCURVE('',#5674,#5679);+#5674 = PLANE('',#5675);+#5675 = AXIS2_PLACEMENT_3D('',#5676,#5677,#5678);+#5676 = CARTESIAN_POINT('',(4.214317369718E-02,3.597892775472,+ 0.193144044696));+#5677 = DIRECTION('',(-1.,0.,0.));+#5678 = DIRECTION('',(0.,-1.,0.));+#5679 = DEFINITIONAL_REPRESENTATION('',(#5680),#5684);+#5680 = LINE('',#5681,#5682);+#5681 = CARTESIAN_POINT('',(0.171908858971,-0.1));+#5682 = VECTOR('',#5683,1.);+#5683 = DIRECTION('',(1.,0.));+#5684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5685 = ORIENTED_EDGE('',*,*,#5686,.T.);+#5686 = EDGE_CURVE('',#5659,#4273,#5687,.T.);+#5687 = SURFACE_CURVE('',#5688,(#5692,#5699),.PCURVE_S1.);+#5688 = LINE('',#5689,#5690);+#5689 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+ 9.314404469578E-02));+#5690 = VECTOR('',#5691,1.);+#5691 = DIRECTION('',(-1.,0.,0.));+#5692 = PCURVE('',#4288,#5693);+#5693 = DEFINITIONAL_REPRESENTATION('',(#5694),#5698);+#5694 = LINE('',#5695,#5696);+#5695 = CARTESIAN_POINT('',(-0.375396759096,-3.9708745308E-02));+#5696 = VECTOR('',#5697,1.);+#5697 = DIRECTION('',(-1.,0.));+#5698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5699 = PCURVE('',#4316,#5700);+#5700 = DEFINITIONAL_REPRESENTATION('',(#5701),#5705);+#5701 = LINE('',#5702,#5703);+#5702 = CARTESIAN_POINT('',(0.117884492123,0.1));+#5703 = VECTOR('',#5704,1.);+#5704 = DIRECTION('',(-1.,0.));+#5705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5706 = ADVANCED_FACE('',(#5707),#2718,.F.);+#5707 = FACE_BOUND('',#5708,.F.);+#5708 = EDGE_LOOP('',(#5709,#5710,#5711,#5732));+#5709 = ORIENTED_EDGE('',*,*,#5491,.F.);+#5710 = ORIENTED_EDGE('',*,*,#2702,.T.);+#5711 = ORIENTED_EDGE('',*,*,#5712,.F.);+#5712 = EDGE_CURVE('',#5517,#2675,#5713,.T.);+#5713 = SURFACE_CURVE('',#5714,(#5718,#5725),.PCURVE_S1.);+#5714 = LINE('',#5715,#5716);+#5715 = CARTESIAN_POINT('',(7.446203941749E-02,3.260692661492,+ 9.314404469578E-02));+#5716 = VECTOR('',#5717,1.);+#5717 = DIRECTION('',(0.,0.,-1.));+#5718 = PCURVE('',#2718,#5719);+#5719 = DEFINITIONAL_REPRESENTATION('',(#5720),#5724);+#5720 = LINE('',#5721,#5722);+#5721 = CARTESIAN_POINT('',(8.276472678656E-02,0.));+#5722 = VECTOR('',#5723,1.);+#5723 = DIRECTION('',(0.,-1.));+#5724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5725 = PCURVE('',#2690,#5726);+#5726 = DEFINITIONAL_REPRESENTATION('',(#5727),#5731);+#5727 = LINE('',#5728,#5729);+#5728 = CARTESIAN_POINT('',(0.,0.));+#5729 = VECTOR('',#5730,1.);+#5730 = DIRECTION('',(0.,-1.));+#5731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5732 = ORIENTED_EDGE('',*,*,#5516,.T.);+#5733 = ADVANCED_FACE('',(#5734),#2690,.F.);+#5734 = FACE_BOUND('',#5735,.F.);+#5735 = EDGE_LOOP('',(#5736,#5737,#5758,#5759));+#5736 = ORIENTED_EDGE('',*,*,#2674,.T.);+#5737 = ORIENTED_EDGE('',*,*,#5738,.F.);+#5738 = EDGE_CURVE('',#5540,#2642,#5739,.T.);+#5739 = SURFACE_CURVE('',#5740,(#5744,#5751),.PCURVE_S1.);+#5740 = LINE('',#5741,#5742);+#5741 = CARTESIAN_POINT('',(0.774462032821,3.260692661493,+ 9.314404469578E-02));+#5742 = VECTOR('',#5743,1.);+#5743 = DIRECTION('',(2.498787288469E-11,0.,-1.));+#5744 = PCURVE('',#2690,#5745);+#5745 = DEFINITIONAL_REPRESENTATION('',(#5746),#5750);+#5746 = LINE('',#5747,#5748);+#5747 = CARTESIAN_POINT('',(0.699999993404,0.));+#5748 = VECTOR('',#5749,1.);+#5749 = DIRECTION('',(2.498787288469E-11,-1.));+#5750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5751 = PCURVE('',#2662,#5752);+#5752 = DEFINITIONAL_REPRESENTATION('',(#5753),#5757);+#5753 = LINE('',#5754,#5755);+#5754 = CARTESIAN_POINT('',(3.141592653662,4.74770178934E-22));+#5755 = VECTOR('',#5756,1.);+#5756 = DIRECTION('',(-1.999029830775E-10,1.));+#5757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5758 = ORIENTED_EDGE('',*,*,#5539,.F.);+#5759 = ORIENTED_EDGE('',*,*,#5712,.T.);+#5760 = ADVANCED_FACE('',(#5761),#2662,.F.);+#5761 = FACE_BOUND('',#5762,.F.);+#5762 = EDGE_LOOP('',(#5763,#5764,#5785,#5786));+#5763 = ORIENTED_EDGE('',*,*,#2641,.F.);+#5764 = ORIENTED_EDGE('',*,*,#5765,.T.);+#5765 = EDGE_CURVE('',#2614,#5563,#5766,.T.);+#5766 = SURFACE_CURVE('',#5767,(#5771,#5778),.PCURVE_S1.);+#5767 = LINE('',#5768,#5769);+#5768 = CARTESIAN_POINT('',(0.774462032823,3.510692661497,0.));+#5769 = VECTOR('',#5770,1.);+#5770 = DIRECTION('',(-2.498548900061E-11,0.,1.));+#5771 = PCURVE('',#2662,#5772);+#5772 = DEFINITIONAL_REPRESENTATION('',(#5773),#5777);+#5773 = LINE('',#5774,#5775);+#5774 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#5775 = VECTOR('',#5776,1.);+#5776 = DIRECTION('',(0.,-1.));+#5777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5778 = PCURVE('',#2629,#5779);+#5779 = DEFINITIONAL_REPRESENTATION('',(#5780),#5784);+#5780 = LINE('',#5781,#5782);+#5781 = CARTESIAN_POINT('',(-0.624999993427,-9.314404469578E-02));+#5782 = VECTOR('',#5783,1.);+#5783 = DIRECTION('',(2.498548900061E-11,1.));+#5784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5785 = ORIENTED_EDGE('',*,*,#5562,.T.);+#5786 = ORIENTED_EDGE('',*,*,#5738,.T.);+#5787 = ADVANCED_FACE('',(#5788),#2629,.F.);+#5788 = FACE_BOUND('',#5789,.F.);+#5789 = EDGE_LOOP('',(#5790,#5791,#5812,#5813));+#5790 = ORIENTED_EDGE('',*,*,#2613,.T.);+#5791 = ORIENTED_EDGE('',*,*,#5792,.T.);+#5792 = EDGE_CURVE('',#2586,#5591,#5793,.T.);+#5793 = SURFACE_CURVE('',#5794,(#5798,#5805),.PCURVE_S1.);+#5794 = LINE('',#5795,#5796);+#5795 = CARTESIAN_POINT('',(7.446203942479E-02,3.510692661498,0.));+#5796 = VECTOR('',#5797,1.);+#5797 = DIRECTION('',(0.,0.,1.));+#5798 = PCURVE('',#2629,#5799);+#5799 = DEFINITIONAL_REPRESENTATION('',(#5800),#5804);+#5800 = LINE('',#5801,#5802);+#5801 = CARTESIAN_POINT('',(7.499999997121E-02,-9.314404469578E-02));+#5802 = VECTOR('',#5803,1.);+#5803 = DIRECTION('',(0.,1.));+#5804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5805 = PCURVE('',#2601,#5806);+#5806 = DEFINITIONAL_REPRESENTATION('',(#5807),#5811);+#5807 = LINE('',#5808,#5809);+#5808 = CARTESIAN_POINT('',(8.276473279185E-02,9.314404469578E-02));+#5809 = VECTOR('',#5810,1.);+#5810 = DIRECTION('',(0.,-1.));+#5811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5812 = ORIENTED_EDGE('',*,*,#5590,.F.);+#5813 = ORIENTED_EDGE('',*,*,#5765,.F.);+#5814 = ADVANCED_FACE('',(#5815),#2601,.F.);+#5815 = FACE_BOUND('',#5816,.F.);+#5816 = EDGE_LOOP('',(#5817,#5818,#5819,#5820));+#5817 = ORIENTED_EDGE('',*,*,#4407,.T.);+#5818 = ORIENTED_EDGE('',*,*,#5613,.T.);+#5819 = ORIENTED_EDGE('',*,*,#5792,.F.);+#5820 = ORIENTED_EDGE('',*,*,#2585,.F.);+#5821 = ADVANCED_FACE('',(#5822),#4372,.T.);+#5822 = FACE_BOUND('',#5823,.F.);+#5823 = EDGE_LOOP('',(#5824,#5825,#5848,#5869));+#5824 = ORIENTED_EDGE('',*,*,#4356,.F.);+#5825 = ORIENTED_EDGE('',*,*,#5826,.F.);+#5826 = EDGE_CURVE('',#5827,#4329,#5829,.T.);+#5827 = VERTEX_POINT('',#5828);+#5828 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+ 0.193144044696));+#5829 = SURFACE_CURVE('',#5830,(#5834,#5841),.PCURVE_S1.);+#5830 = LINE('',#5831,#5832);+#5831 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+ 0.193144044696));+#5832 = VECTOR('',#5833,1.);+#5833 = DIRECTION('',(-1.,0.,0.));+#5834 = PCURVE('',#4372,#5835);+#5835 = DEFINITIONAL_REPRESENTATION('',(#5836),#5840);+#5836 = LINE('',#5837,#5838);+#5837 = CARTESIAN_POINT('',(1.711550788605E-02,0.));+#5838 = VECTOR('',#5839,1.);+#5839 = DIRECTION('',(1.,0.));+#5840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5841 = PCURVE('',#4344,#5842);+#5842 = DEFINITIONAL_REPRESENTATION('',(#5843),#5847);+#5843 = LINE('',#5844,#5845);+#5844 = CARTESIAN_POINT('',(-0.626839066292,7.5022189799E-02));+#5845 = VECTOR('',#5846,1.);+#5846 = DIRECTION('',(-1.,0.));+#5847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5848 = ORIENTED_EDGE('',*,*,#5849,.T.);+#5849 = EDGE_CURVE('',#5827,#5636,#5850,.T.);+#5850 = SURFACE_CURVE('',#5851,(#5855,#5862),.PCURVE_S1.);+#5851 = LINE('',#5852,#5853);+#5852 = CARTESIAN_POINT('',(4.214317369718E-02,3.425983916501,+ 0.193144044696));+#5853 = VECTOR('',#5854,1.);+#5854 = DIRECTION('',(0.,0.,-1.));+#5855 = PCURVE('',#4372,#5856);+#5856 = DEFINITIONAL_REPRESENTATION('',(#5857),#5861);+#5857 = LINE('',#5858,#5859);+#5858 = CARTESIAN_POINT('',(1.711550788605E-02,0.));+#5859 = VECTOR('',#5860,1.);+#5860 = DIRECTION('',(0.,1.));+#5861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5862 = PCURVE('',#5674,#5863);+#5863 = DEFINITIONAL_REPRESENTATION('',(#5864),#5868);+#5864 = LINE('',#5865,#5866);+#5865 = CARTESIAN_POINT('',(0.171908858971,0.));+#5866 = VECTOR('',#5867,1.);+#5867 = DIRECTION('',(0.,-1.));+#5868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5869 = ORIENTED_EDGE('',*,*,#5635,.F.);+#5870 = ADVANCED_FACE('',(#5871),#4344,.F.);+#5871 = FACE_BOUND('',#5872,.F.);+#5872 = EDGE_LOOP('',(#5873,#5874,#5897,#5918));+#5873 = ORIENTED_EDGE('',*,*,#4328,.F.);+#5874 = ORIENTED_EDGE('',*,*,#5875,.F.);+#5875 = EDGE_CURVE('',#5876,#4301,#5878,.T.);+#5876 = VERTEX_POINT('',#5877);+#5877 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+ 0.193144044696));+#5878 = SURFACE_CURVE('',#5879,(#5883,#5890),.PCURVE_S1.);+#5879 = LINE('',#5880,#5881);+#5880 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+ 0.193144044696));+#5881 = VECTOR('',#5882,1.);+#5882 = DIRECTION('',(-1.,0.,0.));+#5883 = PCURVE('',#4344,#5884);+#5884 = DEFINITIONAL_REPRESENTATION('',(#5885),#5889);+#5885 = LINE('',#5886,#5887);+#5886 = CARTESIAN_POINT('',(-0.626839066292,-4.977810199E-03));+#5887 = VECTOR('',#5888,1.);+#5888 = DIRECTION('',(-1.,0.));+#5889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5890 = PCURVE('',#4316,#5891);+#5891 = DEFINITIONAL_REPRESENTATION('',(#5892),#5896);+#5892 = LINE('',#5893,#5894);+#5893 = CARTESIAN_POINT('',(0.117884492123,0.));+#5894 = VECTOR('',#5895,1.);+#5895 = DIRECTION('',(-1.,0.));+#5896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5897 = ORIENTED_EDGE('',*,*,#5898,.T.);+#5898 = EDGE_CURVE('',#5876,#5827,#5899,.T.);+#5899 = SURFACE_CURVE('',#5900,(#5904,#5911),.PCURVE_S1.);+#5900 = LINE('',#5901,#5902);+#5901 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+ 0.193144044696));+#5902 = VECTOR('',#5903,1.);+#5903 = DIRECTION('',(0.,1.,0.));+#5904 = PCURVE('',#4344,#5905);+#5905 = DEFINITIONAL_REPRESENTATION('',(#5906),#5910);+#5906 = LINE('',#5907,#5908);+#5907 = CARTESIAN_POINT('',(-0.626839066292,-4.977810199E-03));+#5908 = VECTOR('',#5909,1.);+#5909 = DIRECTION('',(0.,1.));+#5910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5911 = PCURVE('',#5674,#5912);+#5912 = DEFINITIONAL_REPRESENTATION('',(#5913),#5917);+#5913 = LINE('',#5914,#5915);+#5914 = CARTESIAN_POINT('',(0.251908858969,0.));+#5915 = VECTOR('',#5916,1.);+#5916 = DIRECTION('',(-1.,0.));+#5917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5918 = ORIENTED_EDGE('',*,*,#5826,.T.);+#5919 = ADVANCED_FACE('',(#5920),#4316,.T.);+#5920 = FACE_BOUND('',#5921,.F.);+#5921 = EDGE_LOOP('',(#5922,#5923,#5924,#5945));+#5922 = ORIENTED_EDGE('',*,*,#4300,.T.);+#5923 = ORIENTED_EDGE('',*,*,#5686,.F.);+#5924 = ORIENTED_EDGE('',*,*,#5925,.F.);+#5925 = EDGE_CURVE('',#5876,#5659,#5926,.T.);+#5926 = SURFACE_CURVE('',#5927,(#5931,#5938),.PCURVE_S1.);+#5927 = LINE('',#5928,#5929);+#5928 = CARTESIAN_POINT('',(4.214317369718E-02,3.345983916503,+ 0.193144044696));+#5929 = VECTOR('',#5930,1.);+#5930 = DIRECTION('',(0.,0.,-1.));+#5931 = PCURVE('',#4316,#5932);+#5932 = DEFINITIONAL_REPRESENTATION('',(#5933),#5937);+#5933 = LINE('',#5934,#5935);+#5934 = CARTESIAN_POINT('',(0.117884492123,0.));+#5935 = VECTOR('',#5936,1.);+#5936 = DIRECTION('',(0.,1.));+#5937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5938 = PCURVE('',#5674,#5939);+#5939 = DEFINITIONAL_REPRESENTATION('',(#5940),#5944);+#5940 = LINE('',#5941,#5942);+#5941 = CARTESIAN_POINT('',(0.251908858969,0.));+#5942 = VECTOR('',#5943,1.);+#5943 = DIRECTION('',(0.,-1.));+#5944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5945 = ORIENTED_EDGE('',*,*,#5875,.T.);+#5946 = ADVANCED_FACE('',(#5947),#5674,.T.);+#5947 = FACE_BOUND('',#5948,.F.);+#5948 = EDGE_LOOP('',(#5949,#5950,#5951,#5952));+#5949 = ORIENTED_EDGE('',*,*,#5849,.F.);+#5950 = ORIENTED_EDGE('',*,*,#5898,.F.);+#5951 = ORIENTED_EDGE('',*,*,#5925,.T.);+#5952 = ORIENTED_EDGE('',*,*,#5658,.F.);+#5953 = ADVANCED_FACE('',(#5954),#2550,.F.);+#5954 = FACE_BOUND('',#5955,.F.);+#5955 = EDGE_LOOP('',(#5956,#5957,#5958,#5981));+#5956 = ORIENTED_EDGE('',*,*,#4429,.F.);+#5957 = ORIENTED_EDGE('',*,*,#2534,.T.);+#5958 = ORIENTED_EDGE('',*,*,#5959,.F.);+#5959 = EDGE_CURVE('',#5960,#2507,#5962,.T.);+#5960 = VERTEX_POINT('',#5961);+#5961 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+ 9.314404469578E-02));+#5962 = SURFACE_CURVE('',#5963,(#5967,#5974),.PCURVE_S1.);+#5963 = LINE('',#5964,#5965);+#5964 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+ 9.314404469578E-02));+#5965 = VECTOR('',#5966,1.);+#5966 = DIRECTION('',(1.609121751304E-14,-1.907107260804E-14,-1.));+#5967 = PCURVE('',#2550,#5968);+#5968 = DEFINITIONAL_REPRESENTATION('',(#5969),#5973);+#5969 = LINE('',#5970,#5971);+#5970 = CARTESIAN_POINT('',(8.276473407039E-02,0.));+#5971 = VECTOR('',#5972,1.);+#5972 = DIRECTION('',(2.264646942666E-14,-1.));+#5973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5974 = PCURVE('',#2522,#5975);+#5975 = DEFINITIONAL_REPRESENTATION('',(#5976),#5980);+#5976 = LINE('',#5977,#5978);+#5977 = CARTESIAN_POINT('',(-1.000588500943E-14,0.));+#5978 = VECTOR('',#5979,1.);+#5979 = DIRECTION('',(1.609121751304E-14,-1.));+#5980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5981 = ORIENTED_EDGE('',*,*,#5982,.T.);+#5982 = EDGE_CURVE('',#5960,#4430,#5983,.T.);+#5983 = SURFACE_CURVE('',#5984,(#5988,#5995),.PCURVE_S1.);+#5984 = LINE('',#5985,#5986);+#5985 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+ 9.314404469578E-02));+#5986 = VECTOR('',#5987,1.);+#5987 = DIRECTION('',(-0.90618313999,0.422885465343,0.));+#5988 = PCURVE('',#2550,#5989);+#5989 = DEFINITIONAL_REPRESENTATION('',(#5990),#5994);+#5990 = LINE('',#5991,#5992);+#5991 = CARTESIAN_POINT('',(8.276473407039E-02,0.));+#5992 = VECTOR('',#5993,1.);+#5993 = DIRECTION('',(-1.,0.));+#5994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5995 = PCURVE('',#4468,#5996);+#5996 = DEFINITIONAL_REPRESENTATION('',(#5997),#6001);+#5997 = LINE('',#5998,#5999);+#5998 = CARTESIAN_POINT('',(-0.382684201714,-0.191064392609));+#5999 = VECTOR('',#6000,1.);+#6000 = DIRECTION('',(-0.90618313999,0.422885465343));+#6001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6002 = ADVANCED_FACE('',(#6003),#2522,.F.);+#6003 = FACE_BOUND('',#6004,.F.);+#6004 = EDGE_LOOP('',(#6005,#6006,#6029,#6050));+#6005 = ORIENTED_EDGE('',*,*,#2506,.T.);+#6006 = ORIENTED_EDGE('',*,*,#6007,.T.);+#6007 = EDGE_CURVE('',#2479,#6008,#6010,.T.);+#6008 = VERTEX_POINT('',#6009);+#6009 = CARTESIAN_POINT('',(0.724462039428,4.010692661499,+ 9.314404469578E-02));+#6010 = SURFACE_CURVE('',#6011,(#6015,#6022),.PCURVE_S1.);+#6011 = LINE('',#6012,#6013);+#6012 = CARTESIAN_POINT('',(0.724462039428,4.010692661499,0.));+#6013 = VECTOR('',#6014,1.);+#6014 = DIRECTION('',(0.,0.,1.));+#6015 = PCURVE('',#2522,#6016);+#6016 = DEFINITIONAL_REPRESENTATION('',(#6017),#6021);+#6017 = LINE('',#6018,#6019);+#6018 = CARTESIAN_POINT('',(0.649999993408,-9.314404469578E-02));+#6019 = VECTOR('',#6020,1.);+#6020 = DIRECTION('',(0.,1.));+#6021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6022 = PCURVE('',#2494,#6023);+#6023 = DEFINITIONAL_REPRESENTATION('',(#6024),#6028);+#6024 = LINE('',#6025,#6026);+#6025 = CARTESIAN_POINT('',(0.28284271247,9.314404469578E-02));+#6026 = VECTOR('',#6027,1.);+#6027 = DIRECTION('',(0.,-1.));+#6028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6029 = ORIENTED_EDGE('',*,*,#6030,.F.);+#6030 = EDGE_CURVE('',#5960,#6008,#6031,.T.);+#6031 = SURFACE_CURVE('',#6032,(#6036,#6043),.PCURVE_S1.);+#6032 = LINE('',#6033,#6034);+#6033 = CARTESIAN_POINT('',(7.446204602041E-02,4.010692661499,+ 9.314404469578E-02));+#6034 = VECTOR('',#6035,1.);+#6035 = DIRECTION('',(1.,0.,0.));+#6036 = PCURVE('',#2522,#6037);+#6037 = DEFINITIONAL_REPRESENTATION('',(#6038),#6042);+#6038 = LINE('',#6039,#6040);+#6039 = CARTESIAN_POINT('',(-1.000588500943E-14,0.));+#6040 = VECTOR('',#6041,1.);+#6041 = DIRECTION('',(1.,0.));+#6042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6043 = PCURVE('',#4468,#6044);+#6044 = DEFINITIONAL_REPRESENTATION('',(#6045),#6049);+#6045 = LINE('',#6046,#6047);+#6046 = CARTESIAN_POINT('',(-0.382684201714,-0.191064392609));+#6047 = VECTOR('',#6048,1.);+#6048 = DIRECTION('',(1.,0.));+#6049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6050 = ORIENTED_EDGE('',*,*,#5959,.T.);+#6051 = ADVANCED_FACE('',(#6052),#2494,.F.);+#6052 = FACE_BOUND('',#6053,.F.);+#6053 = EDGE_LOOP('',(#6054,#6055,#6078,#6099));+#6054 = ORIENTED_EDGE('',*,*,#2478,.F.);+#6055 = ORIENTED_EDGE('',*,*,#6056,.T.);+#6056 = EDGE_CURVE('',#2451,#6057,#6059,.T.);+#6057 = VERTEX_POINT('',#6058);+#6058 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+ 9.314404469578E-02));+#6059 = SURFACE_CURVE('',#6060,(#6064,#6071),.PCURVE_S1.);+#6060 = LINE('',#6061,#6062);+#6061 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,0.));+#6062 = VECTOR('',#6063,1.);+#6063 = DIRECTION('',(0.,0.,1.));+#6064 = PCURVE('',#2494,#6065);+#6065 = DEFINITIONAL_REPRESENTATION('',(#6066),#6070);+#6066 = LINE('',#6067,#6068);+#6067 = CARTESIAN_POINT('',(-0.,9.314404469578E-02));+#6068 = VECTOR('',#6069,1.);+#6069 = DIRECTION('',(0.,-1.));+#6070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6071 = PCURVE('',#2466,#6072);+#6072 = DEFINITIONAL_REPRESENTATION('',(#6073),#6077);+#6073 = LINE('',#6074,#6075);+#6074 = CARTESIAN_POINT('',(0.297798440887,-9.314404469578E-02));+#6075 = VECTOR('',#6076,1.);+#6076 = DIRECTION('',(0.,1.));+#6077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6078 = ORIENTED_EDGE('',*,*,#6079,.T.);+#6079 = EDGE_CURVE('',#6057,#6008,#6080,.T.);+#6080 = SURFACE_CURVE('',#6081,(#6085,#6092),.PCURVE_S1.);+#6081 = LINE('',#6082,#6083);+#6082 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+ 9.314404469578E-02));+#6083 = VECTOR('',#6084,1.);+#6084 = DIRECTION('',(-0.707106781195,-0.707106781178,0.));+#6085 = PCURVE('',#2494,#6086);+#6086 = DEFINITIONAL_REPRESENTATION('',(#6087),#6091);+#6087 = LINE('',#6088,#6089);+#6088 = CARTESIAN_POINT('',(0.,0.));+#6089 = VECTOR('',#6090,1.);+#6090 = DIRECTION('',(1.,0.));+#6091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6092 = PCURVE('',#4468,#6093);+#6093 = DEFINITIONAL_REPRESENTATION('',(#6094),#6098);+#6094 = LINE('',#6095,#6096);+#6095 = CARTESIAN_POINT('',(0.467315791693,8.935607386E-03));+#6096 = VECTOR('',#6097,1.);+#6097 = DIRECTION('',(-0.707106781195,-0.707106781178));+#6098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6099 = ORIENTED_EDGE('',*,*,#6007,.F.);+#6100 = ADVANCED_FACE('',(#6101),#6115,.F.);+#6101 = FACE_BOUND('',#6102,.F.);+#6102 = EDGE_LOOP('',(#6103,#6133,#6161,#6189));+#6103 = ORIENTED_EDGE('',*,*,#6104,.T.);+#6104 = EDGE_CURVE('',#6105,#6107,#6109,.T.);+#6105 = VERTEX_POINT('',#6106);+#6106 = CARTESIAN_POINT('',(0.924462039427,4.5,9.314404469578E-02));+#6107 = VERTEX_POINT('',#6108);+#6108 = CARTESIAN_POINT('',(0.924462039427,4.5,0.193144044696));+#6109 = SURFACE_CURVE('',#6110,(#6114,#6126),.PCURVE_S1.);+#6110 = LINE('',#6111,#6112);+#6111 = CARTESIAN_POINT('',(0.924462039427,4.5,9.314404469578E-02));+#6112 = VECTOR('',#6113,1.);+#6113 = DIRECTION('',(0.,0.,1.));+#6114 = PCURVE('',#6115,#6120);+#6115 = PLANE('',#6116);+#6116 = AXIS2_PLACEMENT_3D('',#6117,#6118,#6119);+#6117 = CARTESIAN_POINT('',(0.924462039427,3.912894220607,+ 9.314404469578E-02));+#6118 = DIRECTION('',(1.,0.,0.));+#6119 = DIRECTION('',(-0.,1.,0.));+#6120 = DEFINITIONAL_REPRESENTATION('',(#6121),#6125);+#6121 = LINE('',#6122,#6123);+#6122 = CARTESIAN_POINT('',(0.587105779393,0.));+#6123 = VECTOR('',#6124,1.);+#6124 = DIRECTION('',(0.,1.));+#6125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6126 = PCURVE('',#195,#6127);+#6127 = DEFINITIONAL_REPRESENTATION('',(#6128),#6132);+#6128 = LINE('',#6129,#6130);+#6129 = CARTESIAN_POINT('',(2.575537960573,9.314404469578E-02));+#6130 = VECTOR('',#6131,1.);+#6131 = DIRECTION('',(0.,1.));+#6132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6133 = ORIENTED_EDGE('',*,*,#6134,.F.);+#6134 = EDGE_CURVE('',#6135,#6107,#6137,.T.);+#6135 = VERTEX_POINT('',#6136);+#6136 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+ ));+#6137 = SURFACE_CURVE('',#6138,(#6142,#6149),.PCURVE_S1.);+#6138 = LINE('',#6139,#6140);+#6139 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+ ));+#6140 = VECTOR('',#6141,1.);+#6141 = DIRECTION('',(0.,1.,0.));+#6142 = PCURVE('',#6115,#6143);+#6143 = DEFINITIONAL_REPRESENTATION('',(#6144),#6148);+#6144 = LINE('',#6145,#6146);+#6145 = CARTESIAN_POINT('',(0.489381425964,0.1));+#6146 = VECTOR('',#6147,1.);+#6147 = DIRECTION('',(1.,0.));+#6148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6149 = PCURVE('',#6150,#6155);+#6150 = PLANE('',#6151);+#6151 = AXIS2_PLACEMENT_3D('',#6152,#6153,#6154);+#6152 = CARTESIAN_POINT('',(0.701675974295,4.003933868083,0.193144044696+ ));+#6153 = DIRECTION('',(0.,0.,1.));+#6154 = DIRECTION('',(1.,0.,-0.));+#6155 = DEFINITIONAL_REPRESENTATION('',(#6156),#6160);+#6156 = LINE('',#6157,#6158);+#6157 = CARTESIAN_POINT('',(0.222786065132,0.398341778488));+#6158 = VECTOR('',#6159,1.);+#6159 = DIRECTION('',(0.,1.));+#6160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6161 = ORIENTED_EDGE('',*,*,#6162,.T.);+#6162 = EDGE_CURVE('',#6135,#6163,#6165,.T.);+#6163 = VERTEX_POINT('',#6164);+#6164 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,+ 9.314404469578E-02));+#6165 = SURFACE_CURVE('',#6166,(#6170,#6177),.PCURVE_S1.);+#6166 = LINE('',#6167,#6168);+#6167 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+ ));+#6168 = VECTOR('',#6169,1.);+#6169 = DIRECTION('',(0.,0.,-1.));+#6170 = PCURVE('',#6115,#6171);+#6171 = DEFINITIONAL_REPRESENTATION('',(#6172),#6176);+#6172 = LINE('',#6173,#6174);+#6173 = CARTESIAN_POINT('',(0.489381425964,0.1));+#6174 = VECTOR('',#6175,1.);+#6175 = DIRECTION('',(0.,-1.));+#6176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6177 = PCURVE('',#6178,#6183);+#6178 = PLANE('',#6179);+#6179 = AXIS2_PLACEMENT_3D('',#6180,#6181,#6182);+#6180 = CARTESIAN_POINT('',(1.393162497442,4.402275646571,0.193144044696+ ));+#6181 = DIRECTION('',(0.,1.,0.));+#6182 = DIRECTION('',(-1.,0.,0.));+#6183 = DEFINITIONAL_REPRESENTATION('',(#6184),#6188);+#6184 = LINE('',#6185,#6186);+#6185 = CARTESIAN_POINT('',(0.468700458015,0.));+#6186 = VECTOR('',#6187,1.);+#6187 = DIRECTION('',(0.,-1.));+#6188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6189 = ORIENTED_EDGE('',*,*,#6190,.T.);+#6190 = EDGE_CURVE('',#6163,#6105,#6191,.T.);+#6191 = SURFACE_CURVE('',#6192,(#6196,#6203),.PCURVE_S1.);+#6192 = LINE('',#6193,#6194);+#6193 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,+ 9.314404469578E-02));+#6194 = VECTOR('',#6195,1.);+#6195 = DIRECTION('',(0.,1.,0.));+#6196 = PCURVE('',#6115,#6197);+#6197 = DEFINITIONAL_REPRESENTATION('',(#6198),#6202);+#6198 = LINE('',#6199,#6200);+#6199 = CARTESIAN_POINT('',(0.489381425964,0.));+#6200 = VECTOR('',#6201,1.);+#6201 = DIRECTION('',(1.,0.));+#6202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6203 = PCURVE('',#6204,#6209);+#6204 = PLANE('',#6205);+#6205 = AXIS2_PLACEMENT_3D('',#6206,#6207,#6208);+#6206 = CARTESIAN_POINT('',(0.701675974295,4.003933868083,+ 9.314404469578E-02));+#6207 = DIRECTION('',(0.,0.,1.));+#6208 = DIRECTION('',(1.,0.,-0.));+#6209 = DEFINITIONAL_REPRESENTATION('',(#6210),#6214);+#6210 = LINE('',#6211,#6212);+#6211 = CARTESIAN_POINT('',(0.222786065132,0.398341778488));+#6212 = VECTOR('',#6213,1.);+#6213 = DIRECTION('',(0.,1.));+#6214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6215 = ADVANCED_FACE('',(#6216),#2466,.F.);+#6216 = FACE_BOUND('',#6217,.F.);+#6217 = EDGE_LOOP('',(#6218,#6219,#6242,#6263));+#6218 = ORIENTED_EDGE('',*,*,#2450,.F.);+#6219 = ORIENTED_EDGE('',*,*,#6220,.T.);+#6220 = EDGE_CURVE('',#2423,#6221,#6223,.T.);+#6221 = VERTEX_POINT('',#6222);+#6222 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,+ 9.314404469578E-02));+#6223 = SURFACE_CURVE('',#6224,(#6228,#6235),.PCURVE_S1.);+#6224 = LINE('',#6225,#6226);+#6225 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,0.));+#6226 = VECTOR('',#6227,1.);+#6227 = DIRECTION('',(0.,0.,1.));+#6228 = PCURVE('',#2466,#6229);+#6229 = DEFINITIONAL_REPRESENTATION('',(#6230),#6234);+#6230 = LINE('',#6231,#6232);+#6231 = CARTESIAN_POINT('',(0.472798440887,-9.314404469578E-02));+#6232 = VECTOR('',#6233,1.);+#6233 = DIRECTION('',(0.,1.));+#6234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6235 = PCURVE('',#2438,#6236);+#6236 = DEFINITIONAL_REPRESENTATION('',(#6237),#6241);+#6237 = LINE('',#6238,#6239);+#6238 = CARTESIAN_POINT('',(-0.10000000002,-9.314404469578E-02));+#6239 = VECTOR('',#6240,1.);+#6240 = DIRECTION('',(0.,1.));+#6241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6242 = ORIENTED_EDGE('',*,*,#6243,.F.);+#6243 = EDGE_CURVE('',#6057,#6221,#6244,.T.);+#6244 = SURFACE_CURVE('',#6245,(#6249,#6256),.PCURVE_S1.);+#6245 = LINE('',#6246,#6247);+#6246 = CARTESIAN_POINT('',(0.924462039427,4.210692661494,+ 9.314404469578E-02));+#6247 = VECTOR('',#6248,1.);+#6248 = DIRECTION('',(0.,1.,0.));+#6249 = PCURVE('',#2466,#6250);+#6250 = DEFINITIONAL_REPRESENTATION('',(#6251),#6255);+#6251 = LINE('',#6252,#6253);+#6252 = CARTESIAN_POINT('',(0.297798440887,0.));+#6253 = VECTOR('',#6254,1.);+#6254 = DIRECTION('',(1.,0.));+#6255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6256 = PCURVE('',#4468,#6257);+#6257 = DEFINITIONAL_REPRESENTATION('',(#6258),#6262);+#6258 = LINE('',#6259,#6260);+#6259 = CARTESIAN_POINT('',(0.467315791693,8.935607386E-03));+#6260 = VECTOR('',#6261,1.);+#6261 = DIRECTION('',(0.,1.));+#6262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6263 = ORIENTED_EDGE('',*,*,#6056,.F.);+#6264 = ADVANCED_FACE('',(#6265,#6831),#195,.T.);+#6265 = FACE_BOUND('',#6266,.F.);+#6266 = EDGE_LOOP('',(#6267,#6297,#6325,#6353,#6381,#6404,#6425,#6426,+ #6449,#6477,#6505,#6533,#6561,#6584,#6605,#6606,#6627,#6628,#6629,+ #6630,#6653,#6681,#6709,#6737,#6765,#6788,#6809,#6810));+#6267 = ORIENTED_EDGE('',*,*,#6268,.T.);+#6268 = EDGE_CURVE('',#6269,#6271,#6273,.T.);+#6269 = VERTEX_POINT('',#6270);+#6270 = CARTESIAN_POINT('',(1.659462039431,4.5,9.314404469578E-02));+#6271 = VERTEX_POINT('',#6272);+#6272 = CARTESIAN_POINT('',(1.7092586783,4.5,9.314404469578E-02));+#6273 = SURFACE_CURVE('',#6274,(#6278,#6285),.PCURVE_S1.);+#6274 = LINE('',#6275,#6276);+#6275 = CARTESIAN_POINT('',(1.659462039431,4.5,9.314404469578E-02));+#6276 = VECTOR('',#6277,1.);+#6277 = DIRECTION('',(1.,0.,0.));+#6278 = PCURVE('',#195,#6279);+#6279 = DEFINITIONAL_REPRESENTATION('',(#6280),#6284);+#6280 = LINE('',#6281,#6282);+#6281 = CARTESIAN_POINT('',(1.840537960569,9.314404469578E-02));+#6282 = VECTOR('',#6283,1.);+#6283 = DIRECTION('',(-1.,0.));+#6284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6285 = PCURVE('',#6286,#6291);+#6286 = PLANE('',#6287);+#6287 = AXIS2_PLACEMENT_3D('',#6288,#6289,#6290);+#6288 = CARTESIAN_POINT('',(1.749462039413,3.8473349245,+ 9.314404469578E-02));+#6289 = DIRECTION('',(0.,0.,1.));+#6290 = DIRECTION('',(1.,0.,-0.));+#6291 = DEFINITIONAL_REPRESENTATION('',(#6292),#6296);+#6292 = LINE('',#6293,#6294);+#6293 = CARTESIAN_POINT('',(-8.9999999982E-02,0.6526650755));+#6294 = VECTOR('',#6295,1.);+#6295 = DIRECTION('',(1.,0.));+#6296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6297 = ORIENTED_EDGE('',*,*,#6298,.F.);+#6298 = EDGE_CURVE('',#6299,#6271,#6301,.T.);+#6299 = VERTEX_POINT('',#6300);+#6300 = CARTESIAN_POINT('',(1.7092586783,4.5,0.193144044696));+#6301 = SURFACE_CURVE('',#6302,(#6306,#6313),.PCURVE_S1.);+#6302 = LINE('',#6303,#6304);+#6303 = CARTESIAN_POINT('',(1.7092586783,4.5,0.193144044696));+#6304 = VECTOR('',#6305,1.);+#6305 = DIRECTION('',(0.,0.,-1.));+#6306 = PCURVE('',#195,#6307);+#6307 = DEFINITIONAL_REPRESENTATION('',(#6308),#6312);+#6308 = LINE('',#6309,#6310);+#6309 = CARTESIAN_POINT('',(1.7907413217,0.193144044696));+#6310 = VECTOR('',#6311,1.);+#6311 = DIRECTION('',(0.,-1.));+#6312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6313 = PCURVE('',#6314,#6319);+#6314 = PLANE('',#6315);+#6315 = AXIS2_PLACEMENT_3D('',#6316,#6317,#6318);+#6316 = CARTESIAN_POINT('',(1.7092586783,4.560983911448,0.193144044696)+ );+#6317 = DIRECTION('',(1.,0.,0.));+#6318 = DIRECTION('',(0.,-1.,0.));+#6319 = DEFINITIONAL_REPRESENTATION('',(#6320),#6324);+#6320 = LINE('',#6321,#6322);+#6321 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#6322 = VECTOR('',#6323,1.);+#6323 = DIRECTION('',(0.,1.));+#6324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6325 = ORIENTED_EDGE('',*,*,#6326,.T.);+#6326 = EDGE_CURVE('',#6299,#6327,#6329,.T.);+#6327 = VERTEX_POINT('',#6328);+#6328 = CARTESIAN_POINT('',(1.789258678298,4.5,0.193144044696));+#6329 = SURFACE_CURVE('',#6330,(#6334,#6341),.PCURVE_S1.);+#6330 = LINE('',#6331,#6332);+#6331 = CARTESIAN_POINT('',(1.7092586783,4.5,0.193144044696));+#6332 = VECTOR('',#6333,1.);+#6333 = DIRECTION('',(1.,0.,0.));+#6334 = PCURVE('',#195,#6335);+#6335 = DEFINITIONAL_REPRESENTATION('',(#6336),#6340);+#6336 = LINE('',#6337,#6338);+#6337 = CARTESIAN_POINT('',(1.7907413217,0.193144044696));+#6338 = VECTOR('',#6339,1.);+#6339 = DIRECTION('',(-1.,0.));+#6340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6341 = PCURVE('',#6342,#6347);+#6342 = PLANE('',#6343);+#6343 = AXIS2_PLACEMENT_3D('',#6344,#6345,#6346);+#6344 = CARTESIAN_POINT('',(1.757854474328,3.758446184763,0.193144044696+ ));+#6345 = DIRECTION('',(0.,0.,1.));+#6346 = DIRECTION('',(1.,0.,-0.));+#6347 = DEFINITIONAL_REPRESENTATION('',(#6348),#6352);+#6348 = LINE('',#6349,#6350);+#6349 = CARTESIAN_POINT('',(-4.8595796028E-02,0.741553815237));+#6350 = VECTOR('',#6351,1.);+#6351 = DIRECTION('',(1.,0.));+#6352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6353 = ORIENTED_EDGE('',*,*,#6354,.T.);+#6354 = EDGE_CURVE('',#6327,#6355,#6357,.T.);+#6355 = VERTEX_POINT('',#6356);+#6356 = CARTESIAN_POINT('',(1.789258678298,4.5,9.314404469578E-02));+#6357 = SURFACE_CURVE('',#6358,(#6362,#6369),.PCURVE_S1.);+#6358 = LINE('',#6359,#6360);+#6359 = CARTESIAN_POINT('',(1.789258678298,4.5,0.193144044696));+#6360 = VECTOR('',#6361,1.);+#6361 = DIRECTION('',(0.,0.,-1.));+#6362 = PCURVE('',#195,#6363);+#6363 = DEFINITIONAL_REPRESENTATION('',(#6364),#6368);+#6364 = LINE('',#6365,#6366);+#6365 = CARTESIAN_POINT('',(1.710741321702,0.193144044696));+#6366 = VECTOR('',#6367,1.);+#6367 = DIRECTION('',(0.,-1.));+#6368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6369 = PCURVE('',#6370,#6375);+#6370 = PLANE('',#6371);+#6371 = AXIS2_PLACEMENT_3D('',#6372,#6373,#6374);+#6372 = CARTESIAN_POINT('',(1.789258678298,4.425983911448,0.193144044696+ ));+#6373 = DIRECTION('',(-1.,0.,0.));+#6374 = DIRECTION('',(0.,1.,0.));+#6375 = DEFINITIONAL_REPRESENTATION('',(#6376),#6380);+#6376 = LINE('',#6377,#6378);+#6377 = CARTESIAN_POINT('',(7.4016088552E-02,0.));+#6378 = VECTOR('',#6379,1.);+#6379 = DIRECTION('',(0.,1.));+#6380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6381 = ORIENTED_EDGE('',*,*,#6382,.T.);+#6382 = EDGE_CURVE('',#6355,#6383,#6385,.T.);+#6383 = VERTEX_POINT('',#6384);+#6384 = CARTESIAN_POINT('',(1.839462039413,4.5,9.314404469578E-02));+#6385 = SURFACE_CURVE('',#6386,(#6390,#6397),.PCURVE_S1.);+#6386 = LINE('',#6387,#6388);+#6387 = CARTESIAN_POINT('',(1.789258678298,4.5,9.314404469578E-02));+#6388 = VECTOR('',#6389,1.);+#6389 = DIRECTION('',(1.,0.,0.));+#6390 = PCURVE('',#195,#6391);+#6391 = DEFINITIONAL_REPRESENTATION('',(#6392),#6396);+#6392 = LINE('',#6393,#6394);+#6393 = CARTESIAN_POINT('',(1.710741321702,9.314404469578E-02));+#6394 = VECTOR('',#6395,1.);+#6395 = DIRECTION('',(-1.,0.));+#6396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6397 = PCURVE('',#6286,#6398);+#6398 = DEFINITIONAL_REPRESENTATION('',(#6399),#6403);+#6399 = LINE('',#6400,#6401);+#6400 = CARTESIAN_POINT('',(3.9796638885E-02,0.6526650755));+#6401 = VECTOR('',#6402,1.);+#6402 = DIRECTION('',(1.,0.));+#6403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6404 = ORIENTED_EDGE('',*,*,#6405,.F.);+#6405 = EDGE_CURVE('',#1845,#6383,#6406,.T.);+#6406 = SURFACE_CURVE('',#6407,(#6411,#6418),.PCURVE_S1.);+#6407 = LINE('',#6408,#6409);+#6408 = CARTESIAN_POINT('',(1.839462039413,4.5,0.));+#6409 = VECTOR('',#6410,1.);+#6410 = DIRECTION('',(0.,0.,1.));+#6411 = PCURVE('',#195,#6412);+#6412 = DEFINITIONAL_REPRESENTATION('',(#6413),#6417);+#6413 = LINE('',#6414,#6415);+#6414 = CARTESIAN_POINT('',(1.660537960587,0.));+#6415 = VECTOR('',#6416,1.);+#6416 = DIRECTION('',(0.,1.));+#6417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6418 = PCURVE('',#1883,#6419);+#6419 = DEFINITIONAL_REPRESENTATION('',(#6420),#6424);+#6420 = LINE('',#6421,#6422);+#6421 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#6422 = VECTOR('',#6423,1.);+#6423 = DIRECTION('',(-1.,0.));+#6424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6425 = ORIENTED_EDGE('',*,*,#1844,.T.);+#6426 = ORIENTED_EDGE('',*,*,#6427,.T.);+#6427 = EDGE_CURVE('',#1817,#6428,#6430,.T.);+#6428 = VERTEX_POINT('',#6429);+#6429 = CARTESIAN_POINT('',(2.159462039424,4.5,9.314404469578E-02));+#6430 = SURFACE_CURVE('',#6431,(#6435,#6442),.PCURVE_S1.);+#6431 = LINE('',#6432,#6433);+#6432 = CARTESIAN_POINT('',(2.159462039424,4.5,0.));+#6433 = VECTOR('',#6434,1.);+#6434 = DIRECTION('',(0.,0.,1.));+#6435 = PCURVE('',#195,#6436);+#6436 = DEFINITIONAL_REPRESENTATION('',(#6437),#6441);+#6437 = LINE('',#6438,#6439);+#6438 = CARTESIAN_POINT('',(1.340537960576,0.));+#6439 = VECTOR('',#6440,1.);+#6440 = DIRECTION('',(0.,1.));+#6441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6442 = PCURVE('',#1832,#6443);+#6443 = DEFINITIONAL_REPRESENTATION('',(#6444),#6448);+#6444 = LINE('',#6445,#6446);+#6445 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#6446 = VECTOR('',#6447,1.);+#6447 = DIRECTION('',(1.,0.));+#6448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6449 = ORIENTED_EDGE('',*,*,#6450,.T.);+#6450 = EDGE_CURVE('',#6428,#6451,#6453,.T.);+#6451 = VERTEX_POINT('',#6452);+#6452 = CARTESIAN_POINT('',(2.209258678292,4.5,9.314404469578E-02));+#6453 = SURFACE_CURVE('',#6454,(#6458,#6465),.PCURVE_S1.);+#6454 = LINE('',#6455,#6456);+#6455 = CARTESIAN_POINT('',(2.159462039424,4.5,9.314404469578E-02));+#6456 = VECTOR('',#6457,1.);+#6457 = DIRECTION('',(1.,0.,0.));+#6458 = PCURVE('',#195,#6459);+#6459 = DEFINITIONAL_REPRESENTATION('',(#6460),#6464);+#6460 = LINE('',#6461,#6462);+#6461 = CARTESIAN_POINT('',(1.340537960576,9.314404469578E-02));+#6462 = VECTOR('',#6463,1.);+#6463 = DIRECTION('',(-1.,0.));+#6464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6465 = PCURVE('',#6466,#6471);+#6466 = PLANE('',#6467);+#6467 = AXIS2_PLACEMENT_3D('',#6468,#6469,#6470);+#6468 = CARTESIAN_POINT('',(2.249462039414,4.215183972022,+ 9.314404469578E-02));+#6469 = DIRECTION('',(0.,0.,1.));+#6470 = DIRECTION('',(1.,0.,-0.));+#6471 = DEFINITIONAL_REPRESENTATION('',(#6472),#6476);+#6472 = LINE('',#6473,#6474);+#6473 = CARTESIAN_POINT('',(-8.999999999E-02,0.284816027978));+#6474 = VECTOR('',#6475,1.);+#6475 = DIRECTION('',(1.,0.));+#6476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6477 = ORIENTED_EDGE('',*,*,#6478,.F.);+#6478 = EDGE_CURVE('',#6479,#6451,#6481,.T.);+#6479 = VERTEX_POINT('',#6480);+#6480 = CARTESIAN_POINT('',(2.209258678292,4.5,0.193144044696));+#6481 = SURFACE_CURVE('',#6482,(#6486,#6493),.PCURVE_S1.);+#6482 = LINE('',#6483,#6484);+#6483 = CARTESIAN_POINT('',(2.209258678292,4.5,0.193144044696));+#6484 = VECTOR('',#6485,1.);+#6485 = DIRECTION('',(0.,0.,-1.));+#6486 = PCURVE('',#195,#6487);+#6487 = DEFINITIONAL_REPRESENTATION('',(#6488),#6492);+#6488 = LINE('',#6489,#6490);+#6489 = CARTESIAN_POINT('',(1.290741321708,0.193144044696));+#6490 = VECTOR('',#6491,1.);+#6491 = DIRECTION('',(0.,-1.));+#6492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6493 = PCURVE('',#6494,#6499);+#6494 = PLANE('',#6495);+#6495 = AXIS2_PLACEMENT_3D('',#6496,#6497,#6498);+#6496 = CARTESIAN_POINT('',(2.209258678292,4.560983911448,0.193144044696+ ));+#6497 = DIRECTION('',(1.,0.,0.));+#6498 = DIRECTION('',(0.,-1.,0.));+#6499 = DEFINITIONAL_REPRESENTATION('',(#6500),#6504);+#6500 = LINE('',#6501,#6502);+#6501 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#6502 = VECTOR('',#6503,1.);+#6503 = DIRECTION('',(0.,1.));+#6504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6505 = ORIENTED_EDGE('',*,*,#6506,.T.);+#6506 = EDGE_CURVE('',#6479,#6507,#6509,.T.);+#6507 = VERTEX_POINT('',#6508);+#6508 = CARTESIAN_POINT('',(2.28925867829,4.5,0.193144044696));+#6509 = SURFACE_CURVE('',#6510,(#6514,#6521),.PCURVE_S1.);+#6510 = LINE('',#6511,#6512);+#6511 = CARTESIAN_POINT('',(2.209258678292,4.5,0.193144044696));+#6512 = VECTOR('',#6513,1.);+#6513 = DIRECTION('',(1.,0.,0.));+#6514 = PCURVE('',#195,#6515);+#6515 = DEFINITIONAL_REPRESENTATION('',(#6516),#6520);+#6516 = LINE('',#6517,#6518);+#6517 = CARTESIAN_POINT('',(1.290741321708,0.193144044696));+#6518 = VECTOR('',#6519,1.);+#6519 = DIRECTION('',(-1.,0.));+#6520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6521 = PCURVE('',#6522,#6527);+#6522 = PLANE('',#6523);+#6523 = AXIS2_PLACEMENT_3D('',#6524,#6525,#6526);+#6524 = CARTESIAN_POINT('',(2.25181286836,4.16638978575,0.193144044696)+ );+#6525 = DIRECTION('',(0.,0.,1.));+#6526 = DIRECTION('',(1.,0.,-0.));+#6527 = DEFINITIONAL_REPRESENTATION('',(#6528),#6532);+#6528 = LINE('',#6529,#6530);+#6529 = CARTESIAN_POINT('',(-4.2554190068E-02,0.33361021425));+#6530 = VECTOR('',#6531,1.);+#6531 = DIRECTION('',(1.,0.));+#6532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6533 = ORIENTED_EDGE('',*,*,#6534,.T.);+#6534 = EDGE_CURVE('',#6507,#6535,#6537,.T.);+#6535 = VERTEX_POINT('',#6536);+#6536 = CARTESIAN_POINT('',(2.28925867829,4.5,9.314404469578E-02));+#6537 = SURFACE_CURVE('',#6538,(#6542,#6549),.PCURVE_S1.);+#6538 = LINE('',#6539,#6540);+#6539 = CARTESIAN_POINT('',(2.28925867829,4.5,0.193144044696));+#6540 = VECTOR('',#6541,1.);+#6541 = DIRECTION('',(0.,0.,-1.));+#6542 = PCURVE('',#195,#6543);+#6543 = DEFINITIONAL_REPRESENTATION('',(#6544),#6548);+#6544 = LINE('',#6545,#6546);+#6545 = CARTESIAN_POINT('',(1.21074132171,0.193144044696));+#6546 = VECTOR('',#6547,1.);+#6547 = DIRECTION('',(0.,-1.));+#6548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6549 = PCURVE('',#6550,#6555);+#6550 = PLANE('',#6551);+#6551 = AXIS2_PLACEMENT_3D('',#6552,#6553,#6554);+#6552 = CARTESIAN_POINT('',(2.28925867829,4.425983911448,0.193144044696)+ );+#6553 = DIRECTION('',(-1.,0.,0.));+#6554 = DIRECTION('',(0.,1.,0.));+#6555 = DEFINITIONAL_REPRESENTATION('',(#6556),#6560);+#6556 = LINE('',#6557,#6558);+#6557 = CARTESIAN_POINT('',(7.4016088552E-02,0.));+#6558 = VECTOR('',#6559,1.);+#6559 = DIRECTION('',(0.,1.));+#6560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6561 = ORIENTED_EDGE('',*,*,#6562,.T.);+#6562 = EDGE_CURVE('',#6535,#6563,#6565,.T.);+#6563 = VERTEX_POINT('',#6564);+#6564 = CARTESIAN_POINT('',(2.339462039424,4.5,9.314404469578E-02));+#6565 = SURFACE_CURVE('',#6566,(#6570,#6577),.PCURVE_S1.);+#6566 = LINE('',#6567,#6568);+#6567 = CARTESIAN_POINT('',(2.28925867829,4.5,9.314404469578E-02));+#6568 = VECTOR('',#6569,1.);+#6569 = DIRECTION('',(1.,0.,0.));+#6570 = PCURVE('',#195,#6571);+#6571 = DEFINITIONAL_REPRESENTATION('',(#6572),#6576);+#6572 = LINE('',#6573,#6574);+#6573 = CARTESIAN_POINT('',(1.21074132171,9.314404469578E-02));+#6574 = VECTOR('',#6575,1.);+#6575 = DIRECTION('',(-1.,0.));+#6576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6577 = PCURVE('',#6466,#6578);+#6578 = DEFINITIONAL_REPRESENTATION('',(#6579),#6583);+#6579 = LINE('',#6580,#6581);+#6580 = CARTESIAN_POINT('',(3.9796638876E-02,0.284816027978));+#6581 = VECTOR('',#6582,1.);+#6582 = DIRECTION('',(1.,0.));+#6583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6584 = ORIENTED_EDGE('',*,*,#6585,.F.);+#6585 = EDGE_CURVE('',#1621,#6563,#6586,.T.);+#6586 = SURFACE_CURVE('',#6587,(#6591,#6598),.PCURVE_S1.);+#6587 = LINE('',#6588,#6589);+#6588 = CARTESIAN_POINT('',(2.339462039424,4.5,0.));+#6589 = VECTOR('',#6590,1.);+#6590 = DIRECTION('',(0.,0.,1.));+#6591 = PCURVE('',#195,#6592);+#6592 = DEFINITIONAL_REPRESENTATION('',(#6593),#6597);+#6593 = LINE('',#6594,#6595);+#6594 = CARTESIAN_POINT('',(1.160537960576,0.));+#6595 = VECTOR('',#6596,1.);+#6596 = DIRECTION('',(0.,1.));+#6597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6598 = PCURVE('',#1659,#6599);+#6599 = DEFINITIONAL_REPRESENTATION('',(#6600),#6604);+#6600 = LINE('',#6601,#6602);+#6601 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#6602 = VECTOR('',#6603,1.);+#6603 = DIRECTION('',(-1.,0.));+#6604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6605 = ORIENTED_EDGE('',*,*,#1620,.T.);+#6606 = ORIENTED_EDGE('',*,*,#6607,.F.);+#6607 = EDGE_CURVE('',#180,#1598,#6608,.T.);+#6608 = SURFACE_CURVE('',#6609,(#6613,#6620),.PCURVE_S1.);+#6609 = LINE('',#6610,#6611);+#6610 = CARTESIAN_POINT('',(3.5,4.5,1.9));+#6611 = VECTOR('',#6612,1.);+#6612 = DIRECTION('',(0.,0.,-1.));+#6613 = PCURVE('',#195,#6614);+#6614 = DEFINITIONAL_REPRESENTATION('',(#6615),#6619);+#6615 = LINE('',#6616,#6617);+#6616 = CARTESIAN_POINT('',(0.,1.9));+#6617 = VECTOR('',#6618,1.);+#6618 = DIRECTION('',(0.,-1.));+#6619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6620 = PCURVE('',#221,#6621);+#6621 = DEFINITIONAL_REPRESENTATION('',(#6622),#6626);+#6622 = LINE('',#6623,#6624);+#6623 = CARTESIAN_POINT('',(4.5,1.9));+#6624 = VECTOR('',#6625,1.);+#6625 = DIRECTION('',(0.,-1.));+#6626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6627 = ORIENTED_EDGE('',*,*,#179,.F.);+#6628 = ORIENTED_EDGE('',*,*,#4609,.T.);+#6629 = ORIENTED_EDGE('',*,*,#2292,.T.);+#6630 = ORIENTED_EDGE('',*,*,#6631,.T.);+#6631 = EDGE_CURVE('',#2265,#6632,#6634,.T.);+#6632 = VERTEX_POINT('',#6633);+#6633 = CARTESIAN_POINT('',(1.15946203942,4.5,9.314404469578E-02));+#6634 = SURFACE_CURVE('',#6635,(#6639,#6646),.PCURVE_S1.);+#6635 = LINE('',#6636,#6637);+#6636 = CARTESIAN_POINT('',(1.15946203942,4.5,0.));+#6637 = VECTOR('',#6638,1.);+#6638 = DIRECTION('',(0.,0.,1.));+#6639 = PCURVE('',#195,#6640);+#6640 = DEFINITIONAL_REPRESENTATION('',(#6641),#6645);+#6641 = LINE('',#6642,#6643);+#6642 = CARTESIAN_POINT('',(2.34053796058,0.));+#6643 = VECTOR('',#6644,1.);+#6644 = DIRECTION('',(0.,1.));+#6645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6646 = PCURVE('',#2280,#6647);+#6647 = DEFINITIONAL_REPRESENTATION('',(#6648),#6652);+#6648 = LINE('',#6649,#6650);+#6649 = CARTESIAN_POINT('',(6.855955304216E-03,1.4307338504E-02));+#6650 = VECTOR('',#6651,1.);+#6651 = DIRECTION('',(1.,0.));+#6652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6653 = ORIENTED_EDGE('',*,*,#6654,.T.);+#6654 = EDGE_CURVE('',#6632,#6655,#6657,.T.);+#6655 = VERTEX_POINT('',#6656);+#6656 = CARTESIAN_POINT('',(1.209258678289,4.5,9.314404469578E-02));+#6657 = SURFACE_CURVE('',#6658,(#6662,#6669),.PCURVE_S1.);+#6658 = LINE('',#6659,#6660);+#6659 = CARTESIAN_POINT('',(1.15946203942,4.5,9.314404469578E-02));+#6660 = VECTOR('',#6661,1.);+#6661 = DIRECTION('',(1.,0.,0.));+#6662 = PCURVE('',#195,#6663);+#6663 = DEFINITIONAL_REPRESENTATION('',(#6664),#6668);+#6664 = LINE('',#6665,#6666);+#6665 = CARTESIAN_POINT('',(2.34053796058,9.314404469578E-02));+#6666 = VECTOR('',#6667,1.);+#6667 = DIRECTION('',(-1.,0.));+#6668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6669 = PCURVE('',#6670,#6675);+#6670 = PLANE('',#6671);+#6671 = AXIS2_PLACEMENT_3D('',#6672,#6673,#6674);+#6672 = CARTESIAN_POINT('',(1.249462039421,4.215183972023,+ 9.314404469578E-02));+#6673 = DIRECTION('',(0.,0.,1.));+#6674 = DIRECTION('',(1.,0.,-0.));+#6675 = DEFINITIONAL_REPRESENTATION('',(#6676),#6680);+#6676 = LINE('',#6677,#6678);+#6677 = CARTESIAN_POINT('',(-9.0000000001E-02,0.284816027977));+#6678 = VECTOR('',#6679,1.);+#6679 = DIRECTION('',(1.,0.));+#6680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6681 = ORIENTED_EDGE('',*,*,#6682,.F.);+#6682 = EDGE_CURVE('',#6683,#6655,#6685,.T.);+#6683 = VERTEX_POINT('',#6684);+#6684 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#6685 = SURFACE_CURVE('',#6686,(#6690,#6697),.PCURVE_S1.);+#6686 = LINE('',#6687,#6688);+#6687 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#6688 = VECTOR('',#6689,1.);+#6689 = DIRECTION('',(0.,0.,-1.));+#6690 = PCURVE('',#195,#6691);+#6691 = DEFINITIONAL_REPRESENTATION('',(#6692),#6696);+#6692 = LINE('',#6693,#6694);+#6693 = CARTESIAN_POINT('',(2.290741321711,0.193144044696));+#6694 = VECTOR('',#6695,1.);+#6695 = DIRECTION('',(0.,-1.));+#6696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6697 = PCURVE('',#6698,#6703);+#6698 = PLANE('',#6699);+#6699 = AXIS2_PLACEMENT_3D('',#6700,#6701,#6702);+#6700 = CARTESIAN_POINT('',(1.209258678289,4.560983911448,0.193144044696+ ));+#6701 = DIRECTION('',(1.,0.,0.));+#6702 = DIRECTION('',(0.,-1.,0.));+#6703 = DEFINITIONAL_REPRESENTATION('',(#6704),#6708);+#6704 = LINE('',#6705,#6706);+#6705 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#6706 = VECTOR('',#6707,1.);+#6707 = DIRECTION('',(0.,1.));+#6708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6709 = ORIENTED_EDGE('',*,*,#6710,.T.);+#6710 = EDGE_CURVE('',#6683,#6711,#6713,.T.);+#6711 = VERTEX_POINT('',#6712);+#6712 = CARTESIAN_POINT('',(1.289258678287,4.5,0.193144044696));+#6713 = SURFACE_CURVE('',#6714,(#6718,#6725),.PCURVE_S1.);+#6714 = LINE('',#6715,#6716);+#6715 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#6716 = VECTOR('',#6717,1.);+#6717 = DIRECTION('',(1.,0.,0.));+#6718 = PCURVE('',#195,#6719);+#6719 = DEFINITIONAL_REPRESENTATION('',(#6720),#6724);+#6720 = LINE('',#6721,#6722);+#6721 = CARTESIAN_POINT('',(2.290741321711,0.193144044696));+#6722 = VECTOR('',#6723,1.);+#6723 = DIRECTION('',(-1.,0.));+#6724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6725 = PCURVE('',#6726,#6731);+#6726 = PLANE('',#6727);+#6727 = AXIS2_PLACEMENT_3D('',#6728,#6729,#6730);+#6728 = CARTESIAN_POINT('',(1.247111210467,4.166389785752,0.193144044696+ ));+#6729 = DIRECTION('',(0.,0.,1.));+#6730 = DIRECTION('',(1.,0.,-0.));+#6731 = DEFINITIONAL_REPRESENTATION('',(#6732),#6736);+#6732 = LINE('',#6733,#6734);+#6733 = CARTESIAN_POINT('',(-3.7852532178E-02,0.333610214248));+#6734 = VECTOR('',#6735,1.);+#6735 = DIRECTION('',(1.,0.));+#6736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6737 = ORIENTED_EDGE('',*,*,#6738,.T.);+#6738 = EDGE_CURVE('',#6711,#6739,#6741,.T.);+#6739 = VERTEX_POINT('',#6740);+#6740 = CARTESIAN_POINT('',(1.289258678287,4.5,9.314404469578E-02));+#6741 = SURFACE_CURVE('',#6742,(#6746,#6753),.PCURVE_S1.);+#6742 = LINE('',#6743,#6744);+#6743 = CARTESIAN_POINT('',(1.289258678287,4.5,0.193144044696));+#6744 = VECTOR('',#6745,1.);+#6745 = DIRECTION('',(0.,0.,-1.));+#6746 = PCURVE('',#195,#6747);+#6747 = DEFINITIONAL_REPRESENTATION('',(#6748),#6752);+#6748 = LINE('',#6749,#6750);+#6749 = CARTESIAN_POINT('',(2.210741321713,0.193144044696));+#6750 = VECTOR('',#6751,1.);+#6751 = DIRECTION('',(0.,-1.));+#6752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6753 = PCURVE('',#6754,#6759);+#6754 = PLANE('',#6755);+#6755 = AXIS2_PLACEMENT_3D('',#6756,#6757,#6758);+#6756 = CARTESIAN_POINT('',(1.289258678287,4.425983911448,0.193144044696+ ));+#6757 = DIRECTION('',(-1.,0.,0.));+#6758 = DIRECTION('',(0.,1.,0.));+#6759 = DEFINITIONAL_REPRESENTATION('',(#6760),#6764);+#6760 = LINE('',#6761,#6762);+#6761 = CARTESIAN_POINT('',(7.4016088552E-02,0.));+#6762 = VECTOR('',#6763,1.);+#6763 = DIRECTION('',(0.,1.));+#6764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6765 = ORIENTED_EDGE('',*,*,#6766,.T.);+#6766 = EDGE_CURVE('',#6739,#6767,#6769,.T.);+#6767 = VERTEX_POINT('',#6768);+#6768 = CARTESIAN_POINT('',(1.339462039421,4.5,9.314404469578E-02));+#6769 = SURFACE_CURVE('',#6770,(#6774,#6781),.PCURVE_S1.);+#6770 = LINE('',#6771,#6772);+#6771 = CARTESIAN_POINT('',(1.289258678287,4.5,9.314404469578E-02));+#6772 = VECTOR('',#6773,1.);+#6773 = DIRECTION('',(1.,0.,0.));+#6774 = PCURVE('',#195,#6775);+#6775 = DEFINITIONAL_REPRESENTATION('',(#6776),#6780);+#6776 = LINE('',#6777,#6778);+#6777 = CARTESIAN_POINT('',(2.210741321713,9.314404469578E-02));+#6778 = VECTOR('',#6779,1.);+#6779 = DIRECTION('',(-1.,0.));+#6780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6781 = PCURVE('',#6670,#6782);+#6782 = DEFINITIONAL_REPRESENTATION('',(#6783),#6787);+#6783 = LINE('',#6784,#6785);+#6784 = CARTESIAN_POINT('',(3.9796638866E-02,0.284816027977));+#6785 = VECTOR('',#6786,1.);+#6786 = DIRECTION('',(1.,0.));+#6787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6788 = ORIENTED_EDGE('',*,*,#6789,.F.);+#6789 = EDGE_CURVE('',#2069,#6767,#6790,.T.);+#6790 = SURFACE_CURVE('',#6791,(#6795,#6802),.PCURVE_S1.);+#6791 = LINE('',#6792,#6793);+#6792 = CARTESIAN_POINT('',(1.339462039421,4.5,0.));+#6793 = VECTOR('',#6794,1.);+#6794 = DIRECTION('',(0.,0.,1.));+#6795 = PCURVE('',#195,#6796);+#6796 = DEFINITIONAL_REPRESENTATION('',(#6797),#6801);+#6797 = LINE('',#6798,#6799);+#6798 = CARTESIAN_POINT('',(2.160537960579,0.));+#6799 = VECTOR('',#6800,1.);+#6800 = DIRECTION('',(0.,1.));+#6801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6802 = PCURVE('',#2107,#6803);+#6803 = DEFINITIONAL_REPRESENTATION('',(#6804),#6808);+#6804 = LINE('',#6805,#6806);+#6805 = CARTESIAN_POINT('',(9.314404469578E-02,1.4307338504E-02));+#6806 = VECTOR('',#6807,1.);+#6807 = DIRECTION('',(-1.,0.));+#6808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6809 = ORIENTED_EDGE('',*,*,#2068,.T.);+#6810 = ORIENTED_EDGE('',*,*,#6811,.T.);+#6811 = EDGE_CURVE('',#2041,#6269,#6812,.T.);+#6812 = SURFACE_CURVE('',#6813,(#6817,#6824),.PCURVE_S1.);+#6813 = LINE('',#6814,#6815);+#6814 = CARTESIAN_POINT('',(1.659462039431,4.5,0.));+#6815 = VECTOR('',#6816,1.);+#6816 = DIRECTION('',(0.,0.,1.));+#6817 = PCURVE('',#195,#6818);+#6818 = DEFINITIONAL_REPRESENTATION('',(#6819),#6823);+#6819 = LINE('',#6820,#6821);+#6820 = CARTESIAN_POINT('',(1.840537960569,0.));+#6821 = VECTOR('',#6822,1.);+#6822 = DIRECTION('',(0.,1.));+#6823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6824 = PCURVE('',#2056,#6825);+#6825 = DEFINITIONAL_REPRESENTATION('',(#6826),#6830);+#6826 = LINE('',#6827,#6828);+#6827 = CARTESIAN_POINT('',(6.855955304215E-03,1.4307338504E-02));+#6828 = VECTOR('',#6829,1.);+#6829 = DIRECTION('',(1.,0.));+#6830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6831 = FACE_BOUND('',#6832,.F.);+#6832 = EDGE_LOOP('',(#6833,#6856,#6884,#6905));+#6833 = ORIENTED_EDGE('',*,*,#6834,.F.);+#6834 = EDGE_CURVE('',#6835,#6105,#6837,.T.);+#6835 = VERTEX_POINT('',#6836);+#6836 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6837 = SURFACE_CURVE('',#6838,(#6842,#6849),.PCURVE_S1.);+#6838 = LINE('',#6839,#6840);+#6839 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6840 = VECTOR('',#6841,1.);+#6841 = DIRECTION('',(1.,0.,0.));+#6842 = PCURVE('',#195,#6843);+#6843 = DEFINITIONAL_REPRESENTATION('',(#6844),#6848);+#6844 = LINE('',#6845,#6846);+#6845 = CARTESIAN_POINT('',(2.675537960593,9.314404469578E-02));+#6846 = VECTOR('',#6847,1.);+#6847 = DIRECTION('',(-1.,0.));+#6848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6849 = PCURVE('',#6204,#6850);+#6850 = DEFINITIONAL_REPRESENTATION('',(#6851),#6855);+#6851 = LINE('',#6852,#6853);+#6852 = CARTESIAN_POINT('',(0.122786065112,0.496066131917));+#6853 = VECTOR('',#6854,1.);+#6854 = DIRECTION('',(1.,0.));+#6855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6856 = ORIENTED_EDGE('',*,*,#6857,.T.);+#6857 = EDGE_CURVE('',#6835,#6858,#6860,.T.);+#6858 = VERTEX_POINT('',#6859);+#6859 = CARTESIAN_POINT('',(0.824462039407,4.5,0.193144044696));+#6860 = SURFACE_CURVE('',#6861,(#6865,#6872),.PCURVE_S1.);+#6861 = LINE('',#6862,#6863);+#6862 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6863 = VECTOR('',#6864,1.);+#6864 = DIRECTION('',(0.,0.,1.));+#6865 = PCURVE('',#195,#6866);+#6866 = DEFINITIONAL_REPRESENTATION('',(#6867),#6871);+#6867 = LINE('',#6868,#6869);+#6868 = CARTESIAN_POINT('',(2.675537960593,9.314404469578E-02));+#6869 = VECTOR('',#6870,1.);+#6870 = DIRECTION('',(0.,1.));+#6871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6872 = PCURVE('',#6873,#6878);+#6873 = PLANE('',#6874);+#6874 = AXIS2_PLACEMENT_3D('',#6875,#6876,#6877);+#6875 = CARTESIAN_POINT('',(0.824462039407,4.485692661496,+ 9.314404469578E-02));+#6876 = DIRECTION('',(-1.,0.,0.));+#6877 = DIRECTION('',(0.,-1.,0.));+#6878 = DEFINITIONAL_REPRESENTATION('',(#6879),#6883);+#6879 = LINE('',#6880,#6881);+#6880 = CARTESIAN_POINT('',(-1.4307338504E-02,0.));+#6881 = VECTOR('',#6882,1.);+#6882 = DIRECTION('',(0.,1.));+#6883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6884 = ORIENTED_EDGE('',*,*,#6885,.T.);+#6885 = EDGE_CURVE('',#6858,#6107,#6886,.T.);+#6886 = SURFACE_CURVE('',#6887,(#6891,#6898),.PCURVE_S1.);+#6887 = LINE('',#6888,#6889);+#6888 = CARTESIAN_POINT('',(0.824462039407,4.5,0.193144044696));+#6889 = VECTOR('',#6890,1.);+#6890 = DIRECTION('',(1.,0.,0.));+#6891 = PCURVE('',#195,#6892);+#6892 = DEFINITIONAL_REPRESENTATION('',(#6893),#6897);+#6893 = LINE('',#6894,#6895);+#6894 = CARTESIAN_POINT('',(2.675537960593,0.193144044696));+#6895 = VECTOR('',#6896,1.);+#6896 = DIRECTION('',(-1.,0.));+#6897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6898 = PCURVE('',#6150,#6899);+#6899 = DEFINITIONAL_REPRESENTATION('',(#6900),#6904);+#6900 = LINE('',#6901,#6902);+#6901 = CARTESIAN_POINT('',(0.122786065112,0.496066131917));+#6902 = VECTOR('',#6903,1.);+#6903 = DIRECTION('',(1.,0.));+#6904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6905 = ORIENTED_EDGE('',*,*,#6104,.F.);+#6906 = ADVANCED_FACE('',(#6907),#6204,.T.);+#6907 = FACE_BOUND('',#6908,.F.);+#6908 = EDGE_LOOP('',(#6909,#6910,#6911,#6934));+#6909 = ORIENTED_EDGE('',*,*,#6834,.T.);+#6910 = ORIENTED_EDGE('',*,*,#6190,.F.);+#6911 = ORIENTED_EDGE('',*,*,#6912,.F.);+#6912 = EDGE_CURVE('',#6913,#6163,#6915,.T.);+#6913 = VERTEX_POINT('',#6914);+#6914 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,+ 9.314404469578E-02));+#6915 = SURFACE_CURVE('',#6916,(#6920,#6927),.PCURVE_S1.);+#6916 = LINE('',#6917,#6918);+#6917 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,+ 9.314404469578E-02));+#6918 = VECTOR('',#6919,1.);+#6919 = DIRECTION('',(1.,0.,0.));+#6920 = PCURVE('',#6204,#6921);+#6921 = DEFINITIONAL_REPRESENTATION('',(#6922),#6926);+#6922 = LINE('',#6923,#6924);+#6923 = CARTESIAN_POINT('',(0.122786065112,0.398341778488));+#6924 = VECTOR('',#6925,1.);+#6925 = DIRECTION('',(1.,0.));+#6926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6927 = PCURVE('',#6178,#6928);+#6928 = DEFINITIONAL_REPRESENTATION('',(#6929),#6933);+#6929 = LINE('',#6930,#6931);+#6930 = CARTESIAN_POINT('',(0.568700458035,-0.1));+#6931 = VECTOR('',#6932,1.);+#6932 = DIRECTION('',(-1.,0.));+#6933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6934 = ORIENTED_EDGE('',*,*,#6935,.F.);+#6935 = EDGE_CURVE('',#6835,#6913,#6936,.T.);+#6936 = SURFACE_CURVE('',#6937,(#6941,#6948),.PCURVE_S1.);+#6937 = LINE('',#6938,#6939);+#6938 = CARTESIAN_POINT('',(0.824462039407,4.5,9.314404469578E-02));+#6939 = VECTOR('',#6940,1.);+#6940 = DIRECTION('',(0.,-1.,0.));+#6941 = PCURVE('',#6204,#6942);+#6942 = DEFINITIONAL_REPRESENTATION('',(#6943),#6947);+#6943 = LINE('',#6944,#6945);+#6944 = CARTESIAN_POINT('',(0.122786065112,0.496066131917));+#6945 = VECTOR('',#6946,1.);+#6946 = DIRECTION('',(0.,-1.));+#6947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6948 = PCURVE('',#6873,#6949);+#6949 = DEFINITIONAL_REPRESENTATION('',(#6950),#6954);+#6950 = LINE('',#6951,#6952);+#6951 = CARTESIAN_POINT('',(-1.4307338504E-02,0.));+#6952 = VECTOR('',#6953,1.);+#6953 = DIRECTION('',(1.,0.));+#6954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6955 = ADVANCED_FACE('',(#6956),#6178,.T.);+#6956 = FACE_BOUND('',#6957,.F.);+#6957 = EDGE_LOOP('',(#6958,#6959,#6960,#6983));+#6958 = ORIENTED_EDGE('',*,*,#6912,.T.);+#6959 = ORIENTED_EDGE('',*,*,#6162,.F.);+#6960 = ORIENTED_EDGE('',*,*,#6961,.T.);+#6961 = EDGE_CURVE('',#6135,#6962,#6964,.T.);+#6962 = VERTEX_POINT('',#6963);+#6963 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,0.193144044696+ ));+#6964 = SURFACE_CURVE('',#6965,(#6969,#6976),.PCURVE_S1.);+#6965 = LINE('',#6966,#6967);+#6966 = CARTESIAN_POINT('',(0.924462039427,4.402275646571,0.193144044696+ ));+#6967 = VECTOR('',#6968,1.);+#6968 = DIRECTION('',(-1.,0.,0.));+#6969 = PCURVE('',#6178,#6970);+#6970 = DEFINITIONAL_REPRESENTATION('',(#6971),#6975);+#6971 = LINE('',#6972,#6973);+#6972 = CARTESIAN_POINT('',(0.468700458015,0.));+#6973 = VECTOR('',#6974,1.);+#6974 = DIRECTION('',(1.,0.));+#6975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6976 = PCURVE('',#6150,#6977);+#6977 = DEFINITIONAL_REPRESENTATION('',(#6978),#6982);+#6978 = LINE('',#6979,#6980);+#6979 = CARTESIAN_POINT('',(0.222786065132,0.398341778488));+#6980 = VECTOR('',#6981,1.);+#6981 = DIRECTION('',(-1.,0.));+#6982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6983 = ORIENTED_EDGE('',*,*,#6984,.F.);+#6984 = EDGE_CURVE('',#6913,#6962,#6985,.T.);+#6985 = SURFACE_CURVE('',#6986,(#6990,#6997),.PCURVE_S1.);+#6986 = LINE('',#6987,#6988);+#6987 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,+ 9.314404469578E-02));+#6988 = VECTOR('',#6989,1.);+#6989 = DIRECTION('',(0.,0.,1.));+#6990 = PCURVE('',#6178,#6991);+#6991 = DEFINITIONAL_REPRESENTATION('',(#6992),#6996);+#6992 = LINE('',#6993,#6994);+#6993 = CARTESIAN_POINT('',(0.568700458035,-0.1));+#6994 = VECTOR('',#6995,1.);+#6995 = DIRECTION('',(0.,1.));+#6996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6997 = PCURVE('',#6873,#6998);+#6998 = DEFINITIONAL_REPRESENTATION('',(#6999),#7003);+#6999 = LINE('',#7000,#7001);+#7000 = CARTESIAN_POINT('',(8.3417014925E-02,0.));+#7001 = VECTOR('',#7002,1.);+#7002 = DIRECTION('',(0.,1.));+#7003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7004 = ADVANCED_FACE('',(#7005),#4524,.F.);+#7005 = FACE_BOUND('',#7006,.F.);+#7006 = EDGE_LOOP('',(#7007,#7008,#7031,#7059));+#7007 = ORIENTED_EDGE('',*,*,#4508,.T.);+#7008 = ORIENTED_EDGE('',*,*,#7009,.T.);+#7009 = EDGE_CURVE('',#4481,#7010,#7012,.T.);+#7010 = VERTEX_POINT('',#7011);+#7011 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+ 0.193144044696));+#7012 = SURFACE_CURVE('',#7013,(#7017,#7024),.PCURVE_S1.);+#7013 = LINE('',#7014,#7015);+#7014 = CARTESIAN_POINT('',(0.,4.095983918047,0.193144044696));+#7015 = VECTOR('',#7016,1.);+#7016 = DIRECTION('',(1.,-1.95991083304E-14,0.));+#7017 = PCURVE('',#4524,#7018);+#7018 = DEFINITIONAL_REPRESENTATION('',(#7019),#7023);+#7019 = LINE('',#7020,#7021);+#7020 = CARTESIAN_POINT('',(-0.701675974295,9.2050049964E-02));+#7021 = VECTOR('',#7022,1.);+#7022 = DIRECTION('',(1.,-1.95991083304E-14));+#7023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7024 = PCURVE('',#4496,#7025);+#7025 = DEFINITIONAL_REPRESENTATION('',(#7026),#7030);+#7026 = LINE('',#7027,#7028);+#7027 = CARTESIAN_POINT('',(7.574131511552E-02,0.));+#7028 = VECTOR('',#7029,1.);+#7029 = DIRECTION('',(1.,0.));+#7030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7031 = ORIENTED_EDGE('',*,*,#7032,.T.);+#7032 = EDGE_CURVE('',#7010,#7033,#7035,.T.);+#7033 = VERTEX_POINT('',#7034);+#7034 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+ 0.193144044696));+#7035 = SURFACE_CURVE('',#7036,(#7040,#7047),.PCURVE_S1.);+#7036 = LINE('',#7037,#7038);+#7037 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+ 0.193144044696));+#7038 = VECTOR('',#7039,1.);+#7039 = DIRECTION('',(0.,1.,0.));+#7040 = PCURVE('',#4524,#7041);+#7041 = DEFINITIONAL_REPRESENTATION('',(#7042),#7046);+#7042 = LINE('',#7043,#7044);+#7043 = CARTESIAN_POINT('',(-0.656358687165,9.2050049964E-02));+#7044 = VECTOR('',#7045,1.);+#7045 = DIRECTION('',(0.,1.));+#7046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7047 = PCURVE('',#7048,#7053);+#7048 = PLANE('',#7049);+#7049 = AXIS2_PLACEMENT_3D('',#7050,#7051,#7052);+#7050 = CARTESIAN_POINT('',(4.531728712997E-02,4.402275646571,+ 0.193144044696));+#7051 = DIRECTION('',(-1.,0.,0.));+#7052 = DIRECTION('',(0.,-1.,0.));+#7053 = DEFINITIONAL_REPRESENTATION('',(#7054),#7058);+#7054 = LINE('',#7055,#7056);+#7055 = CARTESIAN_POINT('',(0.306291728524,0.));+#7056 = VECTOR('',#7057,1.);+#7057 = DIRECTION('',(-1.,0.));+#7058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7059 = ORIENTED_EDGE('',*,*,#7060,.T.);+#7060 = EDGE_CURVE('',#7033,#4509,#7061,.T.);+#7061 = SURFACE_CURVE('',#7062,(#7066,#7073),.PCURVE_S1.);+#7062 = LINE('',#7063,#7064);+#7063 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+ 0.193144044696));+#7064 = VECTOR('',#7065,1.);+#7065 = DIRECTION('',(-1.,0.,0.));+#7066 = PCURVE('',#4524,#7067);+#7067 = DEFINITIONAL_REPRESENTATION('',(#7068),#7072);+#7068 = LINE('',#7069,#7070);+#7069 = CARTESIAN_POINT('',(-0.656358687165,0.172050049962));+#7070 = VECTOR('',#7071,1.);+#7071 = DIRECTION('',(-1.,0.));+#7072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7073 = PCURVE('',#4552,#7074);+#7074 = DEFINITIONAL_REPRESENTATION('',(#7075),#7079);+#7075 = LINE('',#7076,#7077);+#7076 = CARTESIAN_POINT('',(1.394139776383E-02,0.));+#7077 = VECTOR('',#7078,1.);+#7078 = DIRECTION('',(1.,0.));+#7079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7080 = ADVANCED_FACE('',(#7081),#6150,.F.);+#7081 = FACE_BOUND('',#7082,.F.);+#7082 = EDGE_LOOP('',(#7083,#7084,#7105,#7106));+#7083 = ORIENTED_EDGE('',*,*,#6885,.F.);+#7084 = ORIENTED_EDGE('',*,*,#7085,.F.);+#7085 = EDGE_CURVE('',#6962,#6858,#7086,.T.);+#7086 = SURFACE_CURVE('',#7087,(#7091,#7098),.PCURVE_S1.);+#7087 = LINE('',#7088,#7089);+#7088 = CARTESIAN_POINT('',(0.824462039407,4.402275646571,0.193144044696+ ));+#7089 = VECTOR('',#7090,1.);+#7090 = DIRECTION('',(0.,1.,0.));+#7091 = PCURVE('',#6150,#7092);+#7092 = DEFINITIONAL_REPRESENTATION('',(#7093),#7097);+#7093 = LINE('',#7094,#7095);+#7094 = CARTESIAN_POINT('',(0.122786065112,0.398341778488));+#7095 = VECTOR('',#7096,1.);+#7096 = DIRECTION('',(0.,1.));+#7097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7098 = PCURVE('',#6873,#7099);+#7099 = DEFINITIONAL_REPRESENTATION('',(#7100),#7104);+#7100 = LINE('',#7101,#7102);+#7101 = CARTESIAN_POINT('',(8.3417014925E-02,0.1));+#7102 = VECTOR('',#7103,1.);+#7103 = DIRECTION('',(-1.,0.));+#7104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7105 = ORIENTED_EDGE('',*,*,#6961,.F.);+#7106 = ORIENTED_EDGE('',*,*,#6134,.T.);+#7107 = ADVANCED_FACE('',(#7108),#4496,.T.);+#7108 = FACE_BOUND('',#7109,.F.);+#7109 = EDGE_LOOP('',(#7110,#7111,#7134,#7155));+#7110 = ORIENTED_EDGE('',*,*,#4480,.T.);+#7111 = ORIENTED_EDGE('',*,*,#7112,.F.);+#7112 = EDGE_CURVE('',#7113,#4453,#7115,.T.);+#7113 = VERTEX_POINT('',#7114);+#7114 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+ 9.314404469578E-02));+#7115 = SURFACE_CURVE('',#7116,(#7120,#7127),.PCURVE_S1.);+#7116 = LINE('',#7117,#7118);+#7117 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+ 9.314404469578E-02));+#7118 = VECTOR('',#7119,1.);+#7119 = DIRECTION('',(-1.,0.,0.));+#7120 = PCURVE('',#4496,#7121);+#7121 = DEFINITIONAL_REPRESENTATION('',(#7122),#7126);+#7122 = LINE('',#7123,#7124);+#7123 = CARTESIAN_POINT('',(0.121058602245,0.1));+#7124 = VECTOR('',#7125,1.);+#7125 = DIRECTION('',(-1.,0.));+#7126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7127 = PCURVE('',#4468,#7128);+#7128 = DEFINITIONAL_REPRESENTATION('',(#7129),#7133);+#7129 = LINE('',#7130,#7131);+#7130 = CARTESIAN_POINT('',(-0.411828960604,-0.105773136061));+#7131 = VECTOR('',#7132,1.);+#7132 = DIRECTION('',(-1.,0.));+#7133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7134 = ORIENTED_EDGE('',*,*,#7135,.F.);+#7135 = EDGE_CURVE('',#7010,#7113,#7136,.T.);+#7136 = SURFACE_CURVE('',#7137,(#7141,#7148),.PCURVE_S1.);+#7137 = LINE('',#7138,#7139);+#7138 = CARTESIAN_POINT('',(4.531728712997E-02,4.095983918047,+ 0.193144044696));+#7139 = VECTOR('',#7140,1.);+#7140 = DIRECTION('',(0.,0.,-1.));+#7141 = PCURVE('',#4496,#7142);+#7142 = DEFINITIONAL_REPRESENTATION('',(#7143),#7147);+#7143 = LINE('',#7144,#7145);+#7144 = CARTESIAN_POINT('',(0.121058602245,0.));+#7145 = VECTOR('',#7146,1.);+#7146 = DIRECTION('',(0.,1.));+#7147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7148 = PCURVE('',#7048,#7149);+#7149 = DEFINITIONAL_REPRESENTATION('',(#7150),#7154);+#7150 = LINE('',#7151,#7152);+#7151 = CARTESIAN_POINT('',(0.306291728524,0.));+#7152 = VECTOR('',#7153,1.);+#7153 = DIRECTION('',(0.,-1.));+#7154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7155 = ORIENTED_EDGE('',*,*,#7009,.F.);+#7156 = ADVANCED_FACE('',(#7157),#4468,.F.);+#7157 = FACE_BOUND('',#7158,.F.);+#7158 = EDGE_LOOP('',(#7159,#7160,#7161,#7162,#7163,#7164,#7187,#7210,+ #7233,#7254,#7255,#7278,#7299));+#7159 = ORIENTED_EDGE('',*,*,#4452,.F.);+#7160 = ORIENTED_EDGE('',*,*,#5982,.F.);+#7161 = ORIENTED_EDGE('',*,*,#6030,.T.);+#7162 = ORIENTED_EDGE('',*,*,#6079,.F.);+#7163 = ORIENTED_EDGE('',*,*,#6243,.T.);+#7164 = ORIENTED_EDGE('',*,*,#7165,.T.);+#7165 = EDGE_CURVE('',#6221,#7166,#7168,.T.);+#7166 = VERTEX_POINT('',#7167);+#7167 = CARTESIAN_POINT('',(0.199462039425,4.385692661494,+ 9.314404469578E-02));+#7168 = SURFACE_CURVE('',#7169,(#7173,#7180),.PCURVE_S1.);+#7169 = LINE('',#7170,#7171);+#7170 = CARTESIAN_POINT('',(0.924462039427,4.385692661494,+ 9.314404469578E-02));+#7171 = VECTOR('',#7172,1.);+#7172 = DIRECTION('',(-1.,0.,0.));+#7173 = PCURVE('',#4468,#7174);+#7174 = DEFINITIONAL_REPRESENTATION('',(#7175),#7179);+#7175 = LINE('',#7176,#7177);+#7176 = CARTESIAN_POINT('',(0.467315791693,0.183935607386));+#7177 = VECTOR('',#7178,1.);+#7178 = DIRECTION('',(-1.,0.));+#7179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7180 = PCURVE('',#2438,#7181);+#7181 = DEFINITIONAL_REPRESENTATION('',(#7182),#7186);+#7182 = LINE('',#7183,#7184);+#7183 = CARTESIAN_POINT('',(-0.10000000002,0.));+#7184 = VECTOR('',#7185,1.);+#7185 = DIRECTION('',(1.,0.));+#7186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7187 = ORIENTED_EDGE('',*,*,#7188,.F.);+#7188 = EDGE_CURVE('',#7189,#7166,#7191,.T.);+#7189 = VERTEX_POINT('',#7190);+#7190 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,+ 9.314404469578E-02));+#7191 = SURFACE_CURVE('',#7192,(#7196,#7203),.PCURVE_S1.);+#7192 = LINE('',#7193,#7194);+#7193 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,+ 9.314404469578E-02));+#7194 = VECTOR('',#7195,1.);+#7195 = DIRECTION('',(0.,1.,0.));+#7196 = PCURVE('',#4468,#7197);+#7197 = DEFINITIONAL_REPRESENTATION('',(#7198),#7202);+#7198 = LINE('',#7199,#7200);+#7199 = CARTESIAN_POINT('',(-0.257684208309,5.8935607388E-02));+#7200 = VECTOR('',#7201,1.);+#7201 = DIRECTION('',(0.,1.));+#7202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7203 = PCURVE('',#2410,#7204);+#7204 = DEFINITIONAL_REPRESENTATION('',(#7205),#7209);+#7205 = LINE('',#7206,#7207);+#7206 = CARTESIAN_POINT('',(1.000088900582E-12,0.));+#7207 = VECTOR('',#7208,1.);+#7208 = DIRECTION('',(1.,0.));+#7209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7210 = ORIENTED_EDGE('',*,*,#7211,.T.);+#7211 = EDGE_CURVE('',#7189,#7212,#7214,.T.);+#7212 = VERTEX_POINT('',#7213);+#7213 = CARTESIAN_POINT('',(7.446203941993E-02,4.260692661496,+ 9.314404469578E-02));+#7214 = SURFACE_CURVE('',#7215,(#7219,#7226),.PCURVE_S1.);+#7215 = LINE('',#7216,#7217);+#7216 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,+ 9.314404469578E-02));+#7217 = VECTOR('',#7218,1.);+#7218 = DIRECTION('',(-1.,0.,0.));+#7219 = PCURVE('',#4468,#7220);+#7220 = DEFINITIONAL_REPRESENTATION('',(#7221),#7225);+#7221 = LINE('',#7222,#7223);+#7222 = CARTESIAN_POINT('',(-0.257684208309,5.8935607388E-02));+#7223 = VECTOR('',#7224,1.);+#7224 = DIRECTION('',(-1.,0.));+#7225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7226 = PCURVE('',#2382,#7227);+#7227 = DEFINITIONAL_REPRESENTATION('',(#7228),#7232);+#7228 = LINE('',#7229,#7230);+#7229 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#7230 = VECTOR('',#7231,1.);+#7231 = DIRECTION('',(1.,0.));+#7232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7233 = ORIENTED_EDGE('',*,*,#7234,.F.);+#7234 = EDGE_CURVE('',#4565,#7212,#7235,.T.);+#7235 = SURFACE_CURVE('',#7236,(#7240,#7247),.PCURVE_S1.);+#7236 = LINE('',#7237,#7238);+#7237 = CARTESIAN_POINT('',(0.,4.225943709765,9.314404469578E-02));+#7238 = VECTOR('',#7239,1.);+#7239 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#7240 = PCURVE('',#4468,#7241);+#7241 = DEFINITIONAL_REPRESENTATION('',(#7242),#7246);+#7242 = LINE('',#7243,#7244);+#7243 = CARTESIAN_POINT('',(-0.457146247734,2.4186655657E-02));+#7244 = VECTOR('',#7245,1.);+#7245 = DIRECTION('',(0.906183139987,0.422885465348));+#7246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7247 = PCURVE('',#2354,#7248);+#7248 = DEFINITIONAL_REPRESENTATION('',(#7249),#7253);+#7249 = LINE('',#7250,#7251);+#7250 = CARTESIAN_POINT('',(5.936554721188E-04,0.));+#7251 = VECTOR('',#7252,1.);+#7252 = DIRECTION('',(1.,0.));+#7253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7254 = ORIENTED_EDGE('',*,*,#4564,.F.);+#7255 = ORIENTED_EDGE('',*,*,#7256,.F.);+#7256 = EDGE_CURVE('',#7257,#4537,#7259,.T.);+#7257 = VERTEX_POINT('',#7258);+#7258 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+ 9.314404469578E-02));+#7259 = SURFACE_CURVE('',#7260,(#7264,#7271),.PCURVE_S1.);+#7260 = LINE('',#7261,#7262);+#7261 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+ 9.314404469578E-02));+#7262 = VECTOR('',#7263,1.);+#7263 = DIRECTION('',(-1.,0.,0.));+#7264 = PCURVE('',#4468,#7265);+#7265 = DEFINITIONAL_REPRESENTATION('',(#7266),#7270);+#7266 = LINE('',#7267,#7268);+#7267 = CARTESIAN_POINT('',(-0.411828960604,-2.5773136063E-02));+#7268 = VECTOR('',#7269,1.);+#7269 = DIRECTION('',(-1.,0.));+#7270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7271 = PCURVE('',#4552,#7272);+#7272 = DEFINITIONAL_REPRESENTATION('',(#7273),#7277);+#7273 = LINE('',#7274,#7275);+#7274 = CARTESIAN_POINT('',(1.394139776383E-02,0.1));+#7275 = VECTOR('',#7276,1.);+#7276 = DIRECTION('',(1.,0.));+#7277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7278 = ORIENTED_EDGE('',*,*,#7279,.T.);+#7279 = EDGE_CURVE('',#7257,#7113,#7280,.T.);+#7280 = SURFACE_CURVE('',#7281,(#7285,#7292),.PCURVE_S1.);+#7281 = LINE('',#7282,#7283);+#7282 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+ 9.314404469578E-02));+#7283 = VECTOR('',#7284,1.);+#7284 = DIRECTION('',(0.,-1.,0.));+#7285 = PCURVE('',#4468,#7286);+#7286 = DEFINITIONAL_REPRESENTATION('',(#7287),#7291);+#7287 = LINE('',#7288,#7289);+#7288 = CARTESIAN_POINT('',(-0.411828960604,-2.5773136063E-02));+#7289 = VECTOR('',#7290,1.);+#7290 = DIRECTION('',(0.,-1.));+#7291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7292 = PCURVE('',#7048,#7293);+#7293 = DEFINITIONAL_REPRESENTATION('',(#7294),#7298);+#7294 = LINE('',#7295,#7296);+#7295 = CARTESIAN_POINT('',(0.226291728526,-0.1));+#7296 = VECTOR('',#7297,1.);+#7297 = DIRECTION('',(1.,0.));+#7298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7299 = ORIENTED_EDGE('',*,*,#7112,.T.);+#7300 = ADVANCED_FACE('',(#7301),#2438,.F.);+#7301 = FACE_BOUND('',#7302,.F.);+#7302 = EDGE_LOOP('',(#7303,#7304,#7325,#7326));+#7303 = ORIENTED_EDGE('',*,*,#2422,.T.);+#7304 = ORIENTED_EDGE('',*,*,#7305,.T.);+#7305 = EDGE_CURVE('',#2395,#7166,#7306,.T.);+#7306 = SURFACE_CURVE('',#7307,(#7311,#7318),.PCURVE_S1.);+#7307 = LINE('',#7308,#7309);+#7308 = CARTESIAN_POINT('',(0.199462039425,4.385692661494,0.));+#7309 = VECTOR('',#7310,1.);+#7310 = DIRECTION('',(0.,0.,1.));+#7311 = PCURVE('',#2438,#7312);+#7312 = DEFINITIONAL_REPRESENTATION('',(#7313),#7317);+#7313 = LINE('',#7314,#7315);+#7314 = CARTESIAN_POINT('',(0.624999999982,-9.314404469578E-02));+#7315 = VECTOR('',#7316,1.);+#7316 = DIRECTION('',(0.,1.));+#7317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7318 = PCURVE('',#2410,#7319);+#7319 = DEFINITIONAL_REPRESENTATION('',(#7320),#7324);+#7320 = LINE('',#7321,#7322);+#7321 = CARTESIAN_POINT('',(0.124999999999,9.314404469578E-02));+#7322 = VECTOR('',#7323,1.);+#7323 = DIRECTION('',(0.,-1.));+#7324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7325 = ORIENTED_EDGE('',*,*,#7165,.F.);+#7326 = ORIENTED_EDGE('',*,*,#6220,.F.);+#7327 = ADVANCED_FACE('',(#7328),#2410,.F.);+#7328 = FACE_BOUND('',#7329,.F.);+#7329 = EDGE_LOOP('',(#7330,#7331,#7352,#7353));+#7330 = ORIENTED_EDGE('',*,*,#2394,.F.);+#7331 = ORIENTED_EDGE('',*,*,#7332,.T.);+#7332 = EDGE_CURVE('',#2367,#7189,#7333,.T.);+#7333 = SURFACE_CURVE('',#7334,(#7338,#7345),.PCURVE_S1.);+#7334 = LINE('',#7335,#7336);+#7335 = CARTESIAN_POINT('',(0.199462039425,4.260692661496,0.));+#7336 = VECTOR('',#7337,1.);+#7337 = DIRECTION('',(0.,0.,1.));+#7338 = PCURVE('',#2410,#7339);+#7339 = DEFINITIONAL_REPRESENTATION('',(#7340),#7344);+#7340 = LINE('',#7341,#7342);+#7341 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#7342 = VECTOR('',#7343,1.);+#7343 = DIRECTION('',(0.,-1.));+#7344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7345 = PCURVE('',#2382,#7346);+#7346 = DEFINITIONAL_REPRESENTATION('',(#7347),#7351);+#7347 = LINE('',#7348,#7349);+#7348 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#7349 = VECTOR('',#7350,1.);+#7350 = DIRECTION('',(0.,1.));+#7351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7352 = ORIENTED_EDGE('',*,*,#7188,.T.);+#7353 = ORIENTED_EDGE('',*,*,#7305,.F.);+#7354 = ADVANCED_FACE('',(#7355),#2382,.F.);+#7355 = FACE_BOUND('',#7356,.F.);+#7356 = EDGE_LOOP('',(#7357,#7358,#7379,#7380));+#7357 = ORIENTED_EDGE('',*,*,#2366,.T.);+#7358 = ORIENTED_EDGE('',*,*,#7359,.T.);+#7359 = EDGE_CURVE('',#2339,#7212,#7360,.T.);+#7360 = SURFACE_CURVE('',#7361,(#7365,#7372),.PCURVE_S1.);+#7361 = LINE('',#7362,#7363);+#7362 = CARTESIAN_POINT('',(7.446203941993E-02,4.260692661496,0.));+#7363 = VECTOR('',#7364,1.);+#7364 = DIRECTION('',(0.,0.,1.));+#7365 = PCURVE('',#2382,#7366);+#7366 = DEFINITIONAL_REPRESENTATION('',(#7367),#7371);+#7367 = LINE('',#7368,#7369);+#7368 = CARTESIAN_POINT('',(7.500000659707E-02,-9.314404469578E-02));+#7369 = VECTOR('',#7370,1.);+#7370 = DIRECTION('',(0.,1.));+#7371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7372 = PCURVE('',#2354,#7373);+#7373 = DEFINITIONAL_REPRESENTATION('',(#7374),#7378);+#7374 = LINE('',#7375,#7376);+#7375 = CARTESIAN_POINT('',(8.276472678666E-02,9.314404469578E-02));+#7376 = VECTOR('',#7377,1.);+#7377 = DIRECTION('',(0.,-1.));+#7378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7379 = ORIENTED_EDGE('',*,*,#7211,.F.);+#7380 = ORIENTED_EDGE('',*,*,#7332,.F.);+#7381 = ADVANCED_FACE('',(#7382),#2354,.F.);+#7382 = FACE_BOUND('',#7383,.F.);+#7383 = EDGE_LOOP('',(#7384,#7385,#7386,#7387));+#7384 = ORIENTED_EDGE('',*,*,#4587,.T.);+#7385 = ORIENTED_EDGE('',*,*,#7234,.T.);+#7386 = ORIENTED_EDGE('',*,*,#7359,.F.);+#7387 = ORIENTED_EDGE('',*,*,#2338,.F.);+#7388 = ADVANCED_FACE('',(#7389),#4552,.T.);+#7389 = FACE_BOUND('',#7390,.F.);+#7390 = EDGE_LOOP('',(#7391,#7392,#7393,#7414));+#7391 = ORIENTED_EDGE('',*,*,#4536,.F.);+#7392 = ORIENTED_EDGE('',*,*,#7060,.F.);+#7393 = ORIENTED_EDGE('',*,*,#7394,.T.);+#7394 = EDGE_CURVE('',#7033,#7257,#7395,.T.);+#7395 = SURFACE_CURVE('',#7396,(#7400,#7407),.PCURVE_S1.);+#7396 = LINE('',#7397,#7398);+#7397 = CARTESIAN_POINT('',(4.531728712997E-02,4.175983918045,+ 0.193144044696));+#7398 = VECTOR('',#7399,1.);+#7399 = DIRECTION('',(0.,0.,-1.));+#7400 = PCURVE('',#4552,#7401);+#7401 = DEFINITIONAL_REPRESENTATION('',(#7402),#7406);+#7402 = LINE('',#7403,#7404);+#7403 = CARTESIAN_POINT('',(1.394139776383E-02,0.));+#7404 = VECTOR('',#7405,1.);+#7405 = DIRECTION('',(0.,1.));+#7406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7407 = PCURVE('',#7048,#7408);+#7408 = DEFINITIONAL_REPRESENTATION('',(#7409),#7413);+#7409 = LINE('',#7410,#7411);+#7410 = CARTESIAN_POINT('',(0.226291728526,0.));+#7411 = VECTOR('',#7412,1.);+#7412 = DIRECTION('',(0.,-1.));+#7413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7414 = ORIENTED_EDGE('',*,*,#7256,.T.);+#7415 = ADVANCED_FACE('',(#7416),#7048,.T.);+#7416 = FACE_BOUND('',#7417,.F.);+#7417 = EDGE_LOOP('',(#7418,#7419,#7420,#7421));+#7418 = ORIENTED_EDGE('',*,*,#7135,.T.);+#7419 = ORIENTED_EDGE('',*,*,#7279,.F.);+#7420 = ORIENTED_EDGE('',*,*,#7394,.F.);+#7421 = ORIENTED_EDGE('',*,*,#7032,.F.);+#7422 = ADVANCED_FACE('',(#7423),#6873,.F.);+#7423 = FACE_BOUND('',#7424,.F.);+#7424 = EDGE_LOOP('',(#7425,#7426,#7427,#7428));+#7425 = ORIENTED_EDGE('',*,*,#6857,.F.);+#7426 = ORIENTED_EDGE('',*,*,#6935,.T.);+#7427 = ORIENTED_EDGE('',*,*,#6984,.T.);+#7428 = ORIENTED_EDGE('',*,*,#7085,.T.);+#7429 = ADVANCED_FACE('',(#7430),#6286,.F.);+#7430 = FACE_BOUND('',#7431,.F.);+#7431 = EDGE_LOOP('',(#7432,#7433,#7456,#7479,#7502,#7530,#7553,#7576,+ #7597,#7598,#7621,#7649));+#7432 = ORIENTED_EDGE('',*,*,#6268,.F.);+#7433 = ORIENTED_EDGE('',*,*,#7434,.F.);+#7434 = EDGE_CURVE('',#7435,#6269,#7437,.T.);+#7435 = VERTEX_POINT('',#7436);+#7436 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,+ 9.314404469578E-02));+#7437 = SURFACE_CURVE('',#7438,(#7442,#7449),.PCURVE_S1.);+#7438 = LINE('',#7439,#7440);+#7439 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,+ 9.314404469578E-02));+#7440 = VECTOR('',#7441,1.);+#7441 = DIRECTION('',(0.,1.,0.));+#7442 = PCURVE('',#6286,#7443);+#7443 = DEFINITIONAL_REPRESENTATION('',(#7444),#7448);+#7444 = LINE('',#7445,#7446);+#7445 = CARTESIAN_POINT('',(-8.9999999982E-02,0.638357737));+#7446 = VECTOR('',#7447,1.);+#7447 = DIRECTION('',(0.,1.));+#7448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7449 = PCURVE('',#2056,#7450);+#7450 = DEFINITIONAL_REPRESENTATION('',(#7451),#7455);+#7451 = LINE('',#7452,#7453);+#7452 = CARTESIAN_POINT('',(9.999999999999E-02,3.99946742391E-12));+#7453 = VECTOR('',#7454,1.);+#7454 = DIRECTION('',(0.,1.));+#7455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7456 = ORIENTED_EDGE('',*,*,#7457,.F.);+#7457 = EDGE_CURVE('',#7458,#7435,#7460,.T.);+#7458 = VERTEX_POINT('',#7459);+#7459 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+ 9.314404469578E-02));+#7460 = SURFACE_CURVE('',#7461,(#7465,#7472),.PCURVE_S1.);+#7461 = LINE('',#7462,#7463);+#7462 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+ 9.314404469578E-02));+#7463 = VECTOR('',#7464,1.);+#7464 = DIRECTION('',(0.624695047618,0.780868809392,0.));+#7465 = PCURVE('',#6286,#7466);+#7466 = DEFINITIONAL_REPRESENTATION('',(#7467),#7471);+#7467 = LINE('',#7468,#7469);+#7468 = CARTESIAN_POINT('',(-0.149999999994,0.563357736997));+#7469 = VECTOR('',#7470,1.);+#7470 = DIRECTION('',(0.624695047618,0.780868809392));+#7471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7472 = PCURVE('',#2028,#7473);+#7473 = DEFINITIONAL_REPRESENTATION('',(#7474),#7478);+#7474 = LINE('',#7475,#7476);+#7475 = CARTESIAN_POINT('',(0.,0.));+#7476 = VECTOR('',#7477,1.);+#7477 = DIRECTION('',(1.,0.));+#7478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7479 = ORIENTED_EDGE('',*,*,#7480,.T.);+#7480 = EDGE_CURVE('',#7458,#7481,#7483,.T.);+#7481 = VERTEX_POINT('',#7482);+#7482 = CARTESIAN_POINT('',(1.599462039419,3.285692661496,+ 9.314404469578E-02));+#7483 = SURFACE_CURVE('',#7484,(#7488,#7495),.PCURVE_S1.);+#7484 = LINE('',#7485,#7486);+#7485 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+ 9.314404469578E-02));+#7486 = VECTOR('',#7487,1.);+#7487 = DIRECTION('',(0.,-1.,0.));+#7488 = PCURVE('',#6286,#7489);+#7489 = DEFINITIONAL_REPRESENTATION('',(#7490),#7494);+#7490 = LINE('',#7491,#7492);+#7491 = CARTESIAN_POINT('',(-0.149999999994,0.563357736997));+#7492 = VECTOR('',#7493,1.);+#7493 = DIRECTION('',(0.,-1.));+#7494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7495 = PCURVE('',#2000,#7496);+#7496 = DEFINITIONAL_REPRESENTATION('',(#7497),#7501);+#7497 = LINE('',#7498,#7499);+#7498 = CARTESIAN_POINT('',(1.999289622745E-12,0.));+#7499 = VECTOR('',#7500,1.);+#7500 = DIRECTION('',(1.,0.));+#7501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7502 = ORIENTED_EDGE('',*,*,#7503,.F.);+#7503 = EDGE_CURVE('',#7504,#7481,#7506,.T.);+#7504 = VERTEX_POINT('',#7505);+#7505 = CARTESIAN_POINT('',(1.899462039407,3.2856926613,+ 9.314404469578E-02));+#7506 = SURFACE_CURVE('',#7507,(#7512,#7523),.PCURVE_S1.);+#7507 = CIRCLE('',#7508,0.149999999994);+#7508 = AXIS2_PLACEMENT_3D('',#7509,#7510,#7511);+#7509 = CARTESIAN_POINT('',(1.749462039413,3.285692661496,+ 9.314404469578E-02));+#7510 = DIRECTION('',(0.,0.,-1.));+#7511 = DIRECTION('',(1.,-1.3086065565E-09,0.));+#7512 = PCURVE('',#6286,#7513);+#7513 = DEFINITIONAL_REPRESENTATION('',(#7514),#7522);+#7514 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7515,#7516,#7517,#7518,+#7519,#7520,#7521),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7515 = CARTESIAN_POINT('',(0.149999999994,-0.5616422632));+#7516 = CARTESIAN_POINT('',(0.149999999654,-0.821449884325));+#7517 = CARTESIAN_POINT('',(-7.500000016699E-02,-0.691546073468));+#7518 = CARTESIAN_POINT('',(-0.299999999988,-0.561642262611));+#7519 = CARTESIAN_POINT('',(-7.499999982701E-02,-0.431738452343));+#7520 = CARTESIAN_POINT('',(0.150000000334,-0.301834642075));+#7521 = CARTESIAN_POINT('',(0.149999999994,-0.5616422632));+#7522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7523 = PCURVE('',#1972,#7524);+#7524 = DEFINITIONAL_REPRESENTATION('',(#7525),#7529);+#7525 = LINE('',#7526,#7527);+#7526 = CARTESIAN_POINT('',(3.141592654898,0.));+#7527 = VECTOR('',#7528,1.);+#7528 = DIRECTION('',(1.,0.));+#7529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7530 = ORIENTED_EDGE('',*,*,#7531,.T.);+#7531 = EDGE_CURVE('',#7504,#7532,#7534,.T.);+#7532 = VERTEX_POINT('',#7533);+#7533 = CARTESIAN_POINT('',(1.899462039389,4.41069266152,+ 9.314404469578E-02));+#7534 = SURFACE_CURVE('',#7535,(#7539,#7546),.PCURVE_S1.);+#7535 = LINE('',#7536,#7537);+#7536 = CARTESIAN_POINT('',(1.899462039395,3.285692661431,+ 9.314404469578E-02));+#7537 = VECTOR('',#7538,1.);+#7538 = DIRECTION('',(-5.387690293475E-12,1.,0.));+#7539 = PCURVE('',#6286,#7540);+#7540 = DEFINITIONAL_REPRESENTATION('',(#7541),#7545);+#7541 = LINE('',#7542,#7543);+#7542 = CARTESIAN_POINT('',(0.149999999982,-0.561642263069));+#7543 = VECTOR('',#7544,1.);+#7544 = DIRECTION('',(-5.387690293475E-12,1.));+#7545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7546 = PCURVE('',#1939,#7547);+#7547 = DEFINITIONAL_REPRESENTATION('',(#7548),#7552);+#7548 = LINE('',#7549,#7550);+#7549 = CARTESIAN_POINT('',(-1.050000000071,0.));+#7550 = VECTOR('',#7551,1.);+#7551 = DIRECTION('',(1.,0.));+#7552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7553 = ORIENTED_EDGE('',*,*,#7554,.F.);+#7554 = EDGE_CURVE('',#7555,#7532,#7557,.T.);+#7555 = VERTEX_POINT('',#7556);+#7556 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+ 9.314404469578E-02));+#7557 = SURFACE_CURVE('',#7558,(#7562,#7569),.PCURVE_S1.);+#7558 = LINE('',#7559,#7560);+#7559 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+ 9.314404469578E-02));+#7560 = VECTOR('',#7561,1.);+#7561 = DIRECTION('',(0.624695047517,-0.780868809473,0.));+#7562 = PCURVE('',#6286,#7563);+#7563 = DEFINITIONAL_REPRESENTATION('',(#7564),#7568);+#7564 = LINE('',#7565,#7566);+#7565 = CARTESIAN_POINT('',(9.E-02,0.638357736997));+#7566 = VECTOR('',#7567,1.);+#7567 = DIRECTION('',(0.624695047517,-0.780868809473));+#7568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7569 = PCURVE('',#1911,#7570);+#7570 = DEFINITIONAL_REPRESENTATION('',(#7571),#7575);+#7571 = LINE('',#7572,#7573);+#7572 = CARTESIAN_POINT('',(0.,0.));+#7573 = VECTOR('',#7574,1.);+#7574 = DIRECTION('',(1.,0.));+#7575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7576 = ORIENTED_EDGE('',*,*,#7577,.T.);+#7577 = EDGE_CURVE('',#7555,#6383,#7578,.T.);+#7578 = SURFACE_CURVE('',#7579,(#7583,#7590),.PCURVE_S1.);+#7579 = LINE('',#7580,#7581);+#7580 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+ 9.314404469578E-02));+#7581 = VECTOR('',#7582,1.);+#7582 = DIRECTION('',(0.,1.,0.));+#7583 = PCURVE('',#6286,#7584);+#7584 = DEFINITIONAL_REPRESENTATION('',(#7585),#7589);+#7585 = LINE('',#7586,#7587);+#7586 = CARTESIAN_POINT('',(9.E-02,0.638357736997));+#7587 = VECTOR('',#7588,1.);+#7588 = DIRECTION('',(0.,1.));+#7589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7590 = PCURVE('',#1883,#7591);+#7591 = DEFINITIONAL_REPRESENTATION('',(#7592),#7596);+#7592 = LINE('',#7593,#7594);+#7593 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#7594 = VECTOR('',#7595,1.);+#7595 = DIRECTION('',(0.,1.));+#7596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7597 = ORIENTED_EDGE('',*,*,#6382,.F.);+#7598 = ORIENTED_EDGE('',*,*,#7599,.T.);+#7599 = EDGE_CURVE('',#6355,#7600,#7602,.T.);+#7600 = VERTEX_POINT('',#7601);+#7601 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,+ 9.314404469578E-02));+#7602 = SURFACE_CURVE('',#7603,(#7607,#7614),.PCURVE_S1.);+#7603 = LINE('',#7604,#7605);+#7604 = CARTESIAN_POINT('',(1.789258678298,4.5,9.314404469578E-02));+#7605 = VECTOR('',#7606,1.);+#7606 = DIRECTION('',(-1.089245117497E-14,-1.,0.));+#7607 = PCURVE('',#6286,#7608);+#7608 = DEFINITIONAL_REPRESENTATION('',(#7609),#7613);+#7609 = LINE('',#7610,#7611);+#7610 = CARTESIAN_POINT('',(3.9796638885E-02,0.6526650755));+#7611 = VECTOR('',#7612,1.);+#7612 = DIRECTION('',(-1.089245117497E-14,-1.));+#7613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7614 = PCURVE('',#6370,#7615);+#7615 = DEFINITIONAL_REPRESENTATION('',(#7616),#7620);+#7616 = LINE('',#7617,#7618);+#7617 = CARTESIAN_POINT('',(7.4016088552E-02,0.1));+#7618 = VECTOR('',#7619,1.);+#7619 = DIRECTION('',(-1.,0.));+#7620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7621 = ORIENTED_EDGE('',*,*,#7622,.T.);+#7622 = EDGE_CURVE('',#7600,#7623,#7625,.T.);+#7623 = VERTEX_POINT('',#7624);+#7624 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,+ 9.314404469578E-02));+#7625 = SURFACE_CURVE('',#7626,(#7630,#7637),.PCURVE_S1.);+#7626 = LINE('',#7627,#7628);+#7627 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,+ 9.314404469578E-02));+#7628 = VECTOR('',#7629,1.);+#7629 = DIRECTION('',(-1.,0.,0.));+#7630 = PCURVE('',#6286,#7631);+#7631 = DEFINITIONAL_REPRESENTATION('',(#7632),#7636);+#7632 = LINE('',#7633,#7634);+#7633 = CARTESIAN_POINT('',(3.9796638885E-02,0.591509528041));+#7634 = VECTOR('',#7635,1.);+#7635 = DIRECTION('',(-1.,0.));+#7636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7637 = PCURVE('',#7638,#7643);+#7638 = PLANE('',#7639);+#7639 = AXIS2_PLACEMENT_3D('',#7640,#7641,#7642);+#7640 = CARTESIAN_POINT('',(2.033570722679,4.438844452541,0.193144044696+ ));+#7641 = DIRECTION('',(0.,1.,0.));+#7642 = DIRECTION('',(-1.,0.,0.));+#7643 = DEFINITIONAL_REPRESENTATION('',(#7644),#7648);+#7644 = LINE('',#7645,#7646);+#7645 = CARTESIAN_POINT('',(0.244312044381,-0.1));+#7646 = VECTOR('',#7647,1.);+#7647 = DIRECTION('',(1.,0.));+#7648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7649 = ORIENTED_EDGE('',*,*,#7650,.T.);+#7650 = EDGE_CURVE('',#7623,#6271,#7651,.T.);+#7651 = SURFACE_CURVE('',#7652,(#7656,#7663),.PCURVE_S1.);+#7652 = LINE('',#7653,#7654);+#7653 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,+ 9.314404469578E-02));+#7654 = VECTOR('',#7655,1.);+#7655 = DIRECTION('',(0.,1.,0.));+#7656 = PCURVE('',#6286,#7657);+#7657 = DEFINITIONAL_REPRESENTATION('',(#7658),#7662);+#7658 = LINE('',#7659,#7660);+#7659 = CARTESIAN_POINT('',(-4.0203361113E-02,0.591509528041));+#7660 = VECTOR('',#7661,1.);+#7661 = DIRECTION('',(0.,1.));+#7662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7663 = PCURVE('',#6314,#7664);+#7664 = DEFINITIONAL_REPRESENTATION('',(#7665),#7669);+#7665 = LINE('',#7666,#7667);+#7666 = CARTESIAN_POINT('',(0.122139458907,0.1));+#7667 = VECTOR('',#7668,1.);+#7668 = DIRECTION('',(-1.,0.));+#7669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7670 = ADVANCED_FACE('',(#7671),#2056,.F.);+#7671 = FACE_BOUND('',#7672,.F.);+#7672 = EDGE_LOOP('',(#7673,#7674,#7675,#7696));+#7673 = ORIENTED_EDGE('',*,*,#6811,.F.);+#7674 = ORIENTED_EDGE('',*,*,#2040,.T.);+#7675 = ORIENTED_EDGE('',*,*,#7676,.F.);+#7676 = EDGE_CURVE('',#7435,#2013,#7677,.T.);+#7677 = SURFACE_CURVE('',#7678,(#7682,#7689),.PCURVE_S1.);+#7678 = LINE('',#7679,#7680);+#7679 = CARTESIAN_POINT('',(1.659462039431,4.4856926615,+ 9.314404469578E-02));+#7680 = VECTOR('',#7681,1.);+#7681 = DIRECTION('',(0.,0.,-1.));+#7682 = PCURVE('',#2056,#7683);+#7683 = DEFINITIONAL_REPRESENTATION('',(#7684),#7688);+#7684 = LINE('',#7685,#7686);+#7685 = CARTESIAN_POINT('',(9.999999999999E-02,3.99946742391E-12));+#7686 = VECTOR('',#7687,1.);+#7687 = DIRECTION('',(-1.,0.));+#7688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7689 = PCURVE('',#2028,#7690);+#7690 = DEFINITIONAL_REPRESENTATION('',(#7691),#7695);+#7691 = LINE('',#7692,#7693);+#7692 = CARTESIAN_POINT('',(9.604686357133E-02,0.));+#7693 = VECTOR('',#7694,1.);+#7694 = DIRECTION('',(0.,1.));+#7695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7696 = ORIENTED_EDGE('',*,*,#7434,.T.);+#7697 = ADVANCED_FACE('',(#7698),#2028,.F.);+#7698 = FACE_BOUND('',#7699,.F.);+#7699 = EDGE_LOOP('',(#7700,#7701,#7722,#7723));+#7700 = ORIENTED_EDGE('',*,*,#2012,.F.);+#7701 = ORIENTED_EDGE('',*,*,#7702,.F.);+#7702 = EDGE_CURVE('',#7458,#1985,#7703,.T.);+#7703 = SURFACE_CURVE('',#7704,(#7708,#7715),.PCURVE_S1.);+#7704 = LINE('',#7705,#7706);+#7705 = CARTESIAN_POINT('',(1.599462039419,4.410692661497,+ 9.314404469578E-02));+#7706 = VECTOR('',#7707,1.);+#7707 = DIRECTION('',(0.,0.,-1.));+#7708 = PCURVE('',#2028,#7709);+#7709 = DEFINITIONAL_REPRESENTATION('',(#7710),#7714);+#7710 = LINE('',#7711,#7712);+#7711 = CARTESIAN_POINT('',(0.,0.));+#7712 = VECTOR('',#7713,1.);+#7713 = DIRECTION('',(0.,1.));+#7714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7715 = PCURVE('',#2000,#7716);+#7716 = DEFINITIONAL_REPRESENTATION('',(#7717),#7721);+#7717 = LINE('',#7718,#7719);+#7718 = CARTESIAN_POINT('',(1.999289622745E-12,0.));+#7719 = VECTOR('',#7720,1.);+#7720 = DIRECTION('',(0.,-1.));+#7721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7722 = ORIENTED_EDGE('',*,*,#7457,.T.);+#7723 = ORIENTED_EDGE('',*,*,#7676,.T.);+#7724 = ADVANCED_FACE('',(#7725),#2000,.F.);+#7725 = FACE_BOUND('',#7726,.F.);+#7726 = EDGE_LOOP('',(#7727,#7728,#7749,#7750));+#7727 = ORIENTED_EDGE('',*,*,#1984,.T.);+#7728 = ORIENTED_EDGE('',*,*,#7729,.F.);+#7729 = EDGE_CURVE('',#7481,#1952,#7730,.T.);+#7730 = SURFACE_CURVE('',#7731,(#7735,#7742),.PCURVE_S1.);+#7731 = LINE('',#7732,#7733);+#7732 = CARTESIAN_POINT('',(1.599462039419,3.285692661496,+ 9.314404469578E-02));+#7733 = VECTOR('',#7734,1.);+#7734 = DIRECTION('',(0.,1.001231311922E-13,-1.));+#7735 = PCURVE('',#2000,#7736);+#7736 = DEFINITIONAL_REPRESENTATION('',(#7737),#7741);+#7737 = LINE('',#7738,#7739);+#7738 = CARTESIAN_POINT('',(1.125000000003,0.));+#7739 = VECTOR('',#7740,1.);+#7740 = DIRECTION('',(-1.001231311922E-13,-1.));+#7741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7742 = PCURVE('',#1972,#7743);+#7743 = DEFINITIONAL_REPRESENTATION('',(#7744),#7748);+#7744 = LINE('',#7745,#7746);+#7745 = CARTESIAN_POINT('',(6.28318530718,0.));+#7746 = VECTOR('',#7747,1.);+#7747 = DIRECTION('',(0.,1.));+#7748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7749 = ORIENTED_EDGE('',*,*,#7480,.F.);+#7750 = ORIENTED_EDGE('',*,*,#7702,.T.);+#7751 = ADVANCED_FACE('',(#7752),#1972,.F.);+#7752 = FACE_BOUND('',#7753,.F.);+#7753 = EDGE_LOOP('',(#7754,#7755,#7776,#7777));+#7754 = ORIENTED_EDGE('',*,*,#1951,.F.);+#7755 = ORIENTED_EDGE('',*,*,#7756,.T.);+#7756 = EDGE_CURVE('',#1924,#7504,#7757,.T.);+#7757 = SURFACE_CURVE('',#7758,(#7762,#7769),.PCURVE_S1.);+#7758 = LINE('',#7759,#7760);+#7759 = CARTESIAN_POINT('',(1.899462039395,3.28569266145,0.));+#7760 = VECTOR('',#7761,1.);+#7761 = DIRECTION('',(0.,-2.080367955449E-10,1.));+#7762 = PCURVE('',#1972,#7763);+#7763 = DEFINITIONAL_REPRESENTATION('',(#7764),#7768);+#7764 = LINE('',#7765,#7766);+#7765 = CARTESIAN_POINT('',(3.141592653896,9.314404469578E-02));+#7766 = VECTOR('',#7767,1.);+#7767 = DIRECTION('',(1.386915148811E-09,-1.));+#7768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7769 = PCURVE('',#1939,#7770);+#7770 = DEFINITIONAL_REPRESENTATION('',(#7771),#7775);+#7771 = LINE('',#7772,#7773);+#7772 = CARTESIAN_POINT('',(-1.050000000052,-9.314404469578E-02));+#7773 = VECTOR('',#7774,1.);+#7774 = DIRECTION('',(-2.080367955449E-10,1.));+#7775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7776 = ORIENTED_EDGE('',*,*,#7503,.T.);+#7777 = ORIENTED_EDGE('',*,*,#7729,.T.);+#7778 = ADVANCED_FACE('',(#7779),#1939,.F.);+#7779 = FACE_BOUND('',#7780,.F.);+#7780 = EDGE_LOOP('',(#7781,#7782,#7803,#7804));+#7781 = ORIENTED_EDGE('',*,*,#1923,.T.);+#7782 = ORIENTED_EDGE('',*,*,#7783,.T.);+#7783 = EDGE_CURVE('',#1896,#7532,#7784,.T.);+#7784 = SURFACE_CURVE('',#7785,(#7789,#7796),.PCURVE_S1.);+#7785 = LINE('',#7786,#7787);+#7786 = CARTESIAN_POINT('',(1.899462039389,4.41069266152,0.));+#7787 = VECTOR('',#7788,1.);+#7788 = DIRECTION('',(0.,0.,1.));+#7789 = PCURVE('',#1939,#7790);+#7790 = DEFINITIONAL_REPRESENTATION('',(#7791),#7795);+#7791 = LINE('',#7792,#7793);+#7792 = CARTESIAN_POINT('',(7.5000000018E-02,-9.314404469578E-02));+#7793 = VECTOR('',#7794,1.);+#7794 = DIRECTION('',(0.,1.));+#7795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7796 = PCURVE('',#1911,#7797);+#7797 = DEFINITIONAL_REPRESENTATION('',(#7798),#7802);+#7798 = LINE('',#7799,#7800);+#7799 = CARTESIAN_POINT('',(9.604686352854E-02,9.314404469578E-02));+#7800 = VECTOR('',#7801,1.);+#7801 = DIRECTION('',(0.,-1.));+#7802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7803 = ORIENTED_EDGE('',*,*,#7531,.F.);+#7804 = ORIENTED_EDGE('',*,*,#7756,.F.);+#7805 = ADVANCED_FACE('',(#7806),#1911,.F.);+#7806 = FACE_BOUND('',#7807,.F.);+#7807 = EDGE_LOOP('',(#7808,#7809,#7830,#7831));+#7808 = ORIENTED_EDGE('',*,*,#1895,.F.);+#7809 = ORIENTED_EDGE('',*,*,#7810,.F.);+#7810 = EDGE_CURVE('',#7555,#1868,#7811,.T.);+#7811 = SURFACE_CURVE('',#7812,(#7816,#7823),.PCURVE_S1.);+#7812 = LINE('',#7813,#7814);+#7813 = CARTESIAN_POINT('',(1.839462039413,4.485692661497,+ 9.314404469578E-02));+#7814 = VECTOR('',#7815,1.);+#7815 = DIRECTION('',(0.,0.,-1.));+#7816 = PCURVE('',#1911,#7817);+#7817 = DEFINITIONAL_REPRESENTATION('',(#7818),#7822);+#7818 = LINE('',#7819,#7820);+#7819 = CARTESIAN_POINT('',(0.,0.));+#7820 = VECTOR('',#7821,1.);+#7821 = DIRECTION('',(0.,1.));+#7822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7823 = PCURVE('',#1883,#7824);+#7824 = DEFINITIONAL_REPRESENTATION('',(#7825),#7829);+#7825 = LINE('',#7826,#7827);+#7826 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#7827 = VECTOR('',#7828,1.);+#7828 = DIRECTION('',(1.,0.));+#7829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7830 = ORIENTED_EDGE('',*,*,#7554,.T.);+#7831 = ORIENTED_EDGE('',*,*,#7783,.F.);+#7832 = ADVANCED_FACE('',(#7833),#1883,.F.);+#7833 = FACE_BOUND('',#7834,.F.);+#7834 = EDGE_LOOP('',(#7835,#7836,#7837,#7838));+#7835 = ORIENTED_EDGE('',*,*,#6405,.T.);+#7836 = ORIENTED_EDGE('',*,*,#7577,.F.);+#7837 = ORIENTED_EDGE('',*,*,#7810,.T.);+#7838 = ORIENTED_EDGE('',*,*,#1867,.F.);+#7839 = ADVANCED_FACE('',(#7840),#6370,.T.);+#7840 = FACE_BOUND('',#7841,.F.);+#7841 = EDGE_LOOP('',(#7842,#7843,#7866,#7887));+#7842 = ORIENTED_EDGE('',*,*,#6354,.F.);+#7843 = ORIENTED_EDGE('',*,*,#7844,.F.);+#7844 = EDGE_CURVE('',#7845,#6327,#7847,.T.);+#7845 = VERTEX_POINT('',#7846);+#7846 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,0.193144044696+ ));+#7847 = SURFACE_CURVE('',#7848,(#7852,#7859),.PCURVE_S1.);+#7848 = LINE('',#7849,#7850);+#7849 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,0.193144044696+ ));+#7850 = VECTOR('',#7851,1.);+#7851 = DIRECTION('',(0.,1.,0.));+#7852 = PCURVE('',#6370,#7853);+#7853 = DEFINITIONAL_REPRESENTATION('',(#7854),#7858);+#7854 = LINE('',#7855,#7856);+#7855 = CARTESIAN_POINT('',(1.2860541093E-02,0.));+#7856 = VECTOR('',#7857,1.);+#7857 = DIRECTION('',(1.,0.));+#7858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7859 = PCURVE('',#6342,#7860);+#7860 = DEFINITIONAL_REPRESENTATION('',(#7861),#7865);+#7861 = LINE('',#7862,#7863);+#7862 = CARTESIAN_POINT('',(3.140420397E-02,0.680398267778));+#7863 = VECTOR('',#7864,1.);+#7864 = DIRECTION('',(0.,1.));+#7865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7866 = ORIENTED_EDGE('',*,*,#7867,.T.);+#7867 = EDGE_CURVE('',#7845,#7600,#7868,.T.);+#7868 = SURFACE_CURVE('',#7869,(#7873,#7880),.PCURVE_S1.);+#7869 = LINE('',#7870,#7871);+#7870 = CARTESIAN_POINT('',(1.789258678298,4.438844452541,0.193144044696+ ));+#7871 = VECTOR('',#7872,1.);+#7872 = DIRECTION('',(0.,0.,-1.));+#7873 = PCURVE('',#6370,#7874);+#7874 = DEFINITIONAL_REPRESENTATION('',(#7875),#7879);+#7875 = LINE('',#7876,#7877);+#7876 = CARTESIAN_POINT('',(1.2860541093E-02,0.));+#7877 = VECTOR('',#7878,1.);+#7878 = DIRECTION('',(0.,1.));+#7879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7880 = PCURVE('',#7638,#7881);+#7881 = DEFINITIONAL_REPRESENTATION('',(#7882),#7886);+#7882 = LINE('',#7883,#7884);+#7883 = CARTESIAN_POINT('',(0.244312044381,0.));+#7884 = VECTOR('',#7885,1.);+#7885 = DIRECTION('',(0.,-1.));+#7886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7887 = ORIENTED_EDGE('',*,*,#7599,.F.);+#7888 = ADVANCED_FACE('',(#7889),#6342,.F.);+#7889 = FACE_BOUND('',#7890,.F.);+#7890 = EDGE_LOOP('',(#7891,#7892,#7915,#7936));+#7891 = ORIENTED_EDGE('',*,*,#6326,.F.);+#7892 = ORIENTED_EDGE('',*,*,#7893,.F.);+#7893 = EDGE_CURVE('',#7894,#6299,#7896,.T.);+#7894 = VERTEX_POINT('',#7895);+#7895 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+ );+#7896 = SURFACE_CURVE('',#7897,(#7901,#7908),.PCURVE_S1.);+#7897 = LINE('',#7898,#7899);+#7898 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+ );+#7899 = VECTOR('',#7900,1.);+#7900 = DIRECTION('',(0.,1.,0.));+#7901 = PCURVE('',#6342,#7902);+#7902 = DEFINITIONAL_REPRESENTATION('',(#7903),#7907);+#7903 = LINE('',#7904,#7905);+#7904 = CARTESIAN_POINT('',(-4.8595796028E-02,0.680398267778));+#7905 = VECTOR('',#7906,1.);+#7906 = DIRECTION('',(0.,1.));+#7907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7908 = PCURVE('',#6314,#7909);+#7909 = DEFINITIONAL_REPRESENTATION('',(#7910),#7914);+#7910 = LINE('',#7911,#7912);+#7911 = CARTESIAN_POINT('',(0.122139458907,0.));+#7912 = VECTOR('',#7913,1.);+#7913 = DIRECTION('',(-1.,0.));+#7914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7915 = ORIENTED_EDGE('',*,*,#7916,.T.);+#7916 = EDGE_CURVE('',#7894,#7845,#7917,.T.);+#7917 = SURFACE_CURVE('',#7918,(#7922,#7929),.PCURVE_S1.);+#7918 = LINE('',#7919,#7920);+#7919 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+ );+#7920 = VECTOR('',#7921,1.);+#7921 = DIRECTION('',(1.,0.,0.));+#7922 = PCURVE('',#6342,#7923);+#7923 = DEFINITIONAL_REPRESENTATION('',(#7924),#7928);+#7924 = LINE('',#7925,#7926);+#7925 = CARTESIAN_POINT('',(-4.8595796028E-02,0.680398267778));+#7926 = VECTOR('',#7927,1.);+#7927 = DIRECTION('',(1.,0.));+#7928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7929 = PCURVE('',#7638,#7930);+#7930 = DEFINITIONAL_REPRESENTATION('',(#7931),#7935);+#7931 = LINE('',#7932,#7933);+#7932 = CARTESIAN_POINT('',(0.324312044379,0.));+#7933 = VECTOR('',#7934,1.);+#7934 = DIRECTION('',(-1.,0.));+#7935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7936 = ORIENTED_EDGE('',*,*,#7844,.T.);+#7937 = ADVANCED_FACE('',(#7938),#6314,.T.);+#7938 = FACE_BOUND('',#7939,.F.);+#7939 = EDGE_LOOP('',(#7940,#7941,#7942,#7963));+#7940 = ORIENTED_EDGE('',*,*,#6298,.T.);+#7941 = ORIENTED_EDGE('',*,*,#7650,.F.);+#7942 = ORIENTED_EDGE('',*,*,#7943,.F.);+#7943 = EDGE_CURVE('',#7894,#7623,#7944,.T.);+#7944 = SURFACE_CURVE('',#7945,(#7949,#7956),.PCURVE_S1.);+#7945 = LINE('',#7946,#7947);+#7946 = CARTESIAN_POINT('',(1.7092586783,4.438844452541,0.193144044696)+ );+#7947 = VECTOR('',#7948,1.);+#7948 = DIRECTION('',(0.,0.,-1.));+#7949 = PCURVE('',#6314,#7950);+#7950 = DEFINITIONAL_REPRESENTATION('',(#7951),#7955);+#7951 = LINE('',#7952,#7953);+#7952 = CARTESIAN_POINT('',(0.122139458907,0.));+#7953 = VECTOR('',#7954,1.);+#7954 = DIRECTION('',(0.,1.));+#7955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7956 = PCURVE('',#7638,#7957);+#7957 = DEFINITIONAL_REPRESENTATION('',(#7958),#7962);+#7958 = LINE('',#7959,#7960);+#7959 = CARTESIAN_POINT('',(0.324312044379,0.));+#7960 = VECTOR('',#7961,1.);+#7961 = DIRECTION('',(0.,-1.));+#7962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7963 = ORIENTED_EDGE('',*,*,#7893,.T.);+#7964 = ADVANCED_FACE('',(#7965),#7638,.T.);+#7965 = FACE_BOUND('',#7966,.F.);+#7966 = EDGE_LOOP('',(#7967,#7968,#7969,#7970));+#7967 = ORIENTED_EDGE('',*,*,#7867,.F.);+#7968 = ORIENTED_EDGE('',*,*,#7916,.F.);+#7969 = ORIENTED_EDGE('',*,*,#7943,.T.);+#7970 = ORIENTED_EDGE('',*,*,#7622,.F.);+#7971 = ADVANCED_FACE('',(#7972),#1832,.F.);+#7972 = FACE_BOUND('',#7973,.F.);+#7973 = EDGE_LOOP('',(#7974,#7975,#7976,#7999));+#7974 = ORIENTED_EDGE('',*,*,#6427,.F.);+#7975 = ORIENTED_EDGE('',*,*,#1816,.T.);+#7976 = ORIENTED_EDGE('',*,*,#7977,.T.);+#7977 = EDGE_CURVE('',#1789,#7978,#7980,.T.);+#7978 = VERTEX_POINT('',#7979);+#7979 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+ 9.314404469578E-02));+#7980 = SURFACE_CURVE('',#7981,(#7985,#7992),.PCURVE_S1.);+#7981 = LINE('',#7982,#7983);+#7982 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,0.));+#7983 = VECTOR('',#7984,1.);+#7984 = DIRECTION('',(0.,0.,1.));+#7985 = PCURVE('',#1832,#7986);+#7986 = DEFINITIONAL_REPRESENTATION('',(#7987),#7991);+#7987 = LINE('',#7988,#7989);+#7988 = CARTESIAN_POINT('',(6.855955304215E-03,0.));+#7989 = VECTOR('',#7990,1.);+#7990 = DIRECTION('',(1.,0.));+#7991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7992 = PCURVE('',#1804,#7993);+#7993 = DEFINITIONAL_REPRESENTATION('',(#7994),#7998);+#7994 = LINE('',#7995,#7996);+#7995 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#7996 = VECTOR('',#7997,1.);+#7997 = DIRECTION('',(0.,1.));+#7998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7999 = ORIENTED_EDGE('',*,*,#8000,.T.);+#8000 = EDGE_CURVE('',#7978,#6428,#8001,.T.);+#8001 = SURFACE_CURVE('',#8002,(#8006,#8013),.PCURVE_S1.);+#8002 = LINE('',#8003,#8004);+#8003 = CARTESIAN_POINT('',(2.159462039424,4.485692661496,+ 9.314404469578E-02));+#8004 = VECTOR('',#8005,1.);+#8005 = DIRECTION('',(0.,1.,0.));+#8006 = PCURVE('',#1832,#8007);+#8007 = DEFINITIONAL_REPRESENTATION('',(#8008),#8012);+#8008 = LINE('',#8009,#8010);+#8009 = CARTESIAN_POINT('',(9.999999999999E-02,0.));+#8010 = VECTOR('',#8011,1.);+#8011 = DIRECTION('',(0.,1.));+#8012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8013 = PCURVE('',#6466,#8014);+#8014 = DEFINITIONAL_REPRESENTATION('',(#8015),#8019);+#8015 = LINE('',#8016,#8017);+#8016 = CARTESIAN_POINT('',(-8.999999999E-02,0.270508689474));+#8017 = VECTOR('',#8018,1.);+#8018 = DIRECTION('',(0.,1.));+#8019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8020 = ADVANCED_FACE('',(#8021),#1804,.F.);+#8021 = FACE_BOUND('',#8022,.F.);+#8022 = EDGE_LOOP('',(#8023,#8024,#8047,#8068));+#8023 = ORIENTED_EDGE('',*,*,#1788,.T.);+#8024 = ORIENTED_EDGE('',*,*,#8025,.F.);+#8025 = EDGE_CURVE('',#8026,#1761,#8028,.T.);+#8026 = VERTEX_POINT('',#8027);+#8027 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+ 9.314404469578E-02));+#8028 = SURFACE_CURVE('',#8029,(#8033,#8040),.PCURVE_S1.);+#8029 = LINE('',#8030,#8031);+#8030 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+ 9.314404469578E-02));+#8031 = VECTOR('',#8032,1.);+#8032 = DIRECTION('',(0.,1.907107260804E-14,-1.));+#8033 = PCURVE('',#1804,#8034);+#8034 = DEFINITIONAL_REPRESENTATION('',(#8035),#8039);+#8035 = LINE('',#8036,#8037);+#8036 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#8037 = VECTOR('',#8038,1.);+#8038 = DIRECTION('',(-1.728188445828E-14,-1.));+#8039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8040 = PCURVE('',#1776,#8041);+#8041 = DEFINITIONAL_REPRESENTATION('',(#8042),#8046);+#8042 = LINE('',#8043,#8044);+#8043 = CARTESIAN_POINT('',(0.,0.));+#8044 = VECTOR('',#8045,1.);+#8045 = DIRECTION('',(-1.907107260804E-14,-1.));+#8046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8047 = ORIENTED_EDGE('',*,*,#8048,.T.);+#8048 = EDGE_CURVE('',#8026,#7978,#8049,.T.);+#8049 = SURFACE_CURVE('',#8050,(#8054,#8061),.PCURVE_S1.);+#8050 = LINE('',#8051,#8052);+#8051 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+ 9.314404469578E-02));+#8052 = VECTOR('',#8053,1.);+#8053 = DIRECTION('',(0.422885465415,0.906183139956,0.));+#8054 = PCURVE('',#1804,#8055);+#8055 = DEFINITIONAL_REPRESENTATION('',(#8056),#8060);+#8056 = LINE('',#8057,#8058);+#8057 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#8058 = VECTOR('',#8059,1.);+#8059 = DIRECTION('',(-1.,0.));+#8060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8061 = PCURVE('',#6466,#8062);+#8062 = DEFINITIONAL_REPRESENTATION('',(#8063),#8067);+#8063 = LINE('',#8064,#8065);+#8064 = CARTESIAN_POINT('',(-0.124999999997,0.195508689477));+#8065 = VECTOR('',#8066,1.);+#8066 = DIRECTION('',(0.422885465415,0.906183139956));+#8067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8068 = ORIENTED_EDGE('',*,*,#7977,.F.);+#8069 = ADVANCED_FACE('',(#8070),#1776,.F.);+#8070 = FACE_BOUND('',#8071,.F.);+#8071 = EDGE_LOOP('',(#8072,#8073,#8096,#8117));+#8072 = ORIENTED_EDGE('',*,*,#1760,.T.);+#8073 = ORIENTED_EDGE('',*,*,#8074,.F.);+#8074 = EDGE_CURVE('',#8075,#1728,#8077,.T.);+#8075 = VERTEX_POINT('',#8076);+#8076 = CARTESIAN_POINT('',(2.124462039406,4.010692661363,+ 9.314404469578E-02));+#8077 = SURFACE_CURVE('',#8078,(#8082,#8089),.PCURVE_S1.);+#8078 = LINE('',#8079,#8080);+#8079 = CARTESIAN_POINT('',(2.124462039413,4.01069266145,+ 9.314404469578E-02));+#8080 = VECTOR('',#8081,1.);+#8081 = DIRECTION('',(0.,1.715729047183E-10,-1.));+#8082 = PCURVE('',#1776,#8083);+#8083 = DEFINITIONAL_REPRESENTATION('',(#8084),#8088);+#8084 = LINE('',#8085,#8086);+#8085 = CARTESIAN_POINT('',(0.400000000049,0.));+#8086 = VECTOR('',#8087,1.);+#8087 = DIRECTION('',(-1.715729047183E-10,-1.));+#8088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8089 = PCURVE('',#1748,#8090);+#8090 = DEFINITIONAL_REPRESENTATION('',(#8091),#8095);+#8091 = LINE('',#8092,#8093);+#8092 = CARTESIAN_POINT('',(6.28318530718,1.492695061669E-20));+#8093 = VECTOR('',#8094,1.);+#8094 = DIRECTION('',(0.,1.));+#8095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8096 = ORIENTED_EDGE('',*,*,#8097,.F.);+#8097 = EDGE_CURVE('',#8026,#8075,#8098,.T.);+#8098 = SURFACE_CURVE('',#8099,(#8103,#8110),.PCURVE_S1.);+#8099 = LINE('',#8100,#8101);+#8100 = CARTESIAN_POINT('',(2.124462039417,4.410692661499,+ 9.314404469578E-02));+#8101 = VECTOR('',#8102,1.);+#8102 = DIRECTION('',(-9.092726570574E-12,-1.,0.));+#8103 = PCURVE('',#1776,#8104);+#8104 = DEFINITIONAL_REPRESENTATION('',(#8105),#8109);+#8105 = LINE('',#8106,#8107);+#8106 = CARTESIAN_POINT('',(0.,0.));+#8107 = VECTOR('',#8108,1.);+#8108 = DIRECTION('',(1.,0.));+#8109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8110 = PCURVE('',#6466,#8111);+#8111 = DEFINITIONAL_REPRESENTATION('',(#8112),#8116);+#8112 = LINE('',#8113,#8114);+#8113 = CARTESIAN_POINT('',(-0.124999999997,0.195508689477));+#8114 = VECTOR('',#8115,1.);+#8115 = DIRECTION('',(-9.092726570574E-12,-1.));+#8116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8117 = ORIENTED_EDGE('',*,*,#8025,.T.);+#8118 = ADVANCED_FACE('',(#8119),#1748,.F.);+#8119 = FACE_BOUND('',#8120,.F.);+#8120 = EDGE_LOOP('',(#8121,#8122,#8145,#8170));+#8121 = ORIENTED_EDGE('',*,*,#1727,.F.);+#8122 = ORIENTED_EDGE('',*,*,#8123,.T.);+#8123 = EDGE_CURVE('',#1700,#8124,#8126,.T.);+#8124 = VERTEX_POINT('',#8125);+#8125 = CARTESIAN_POINT('',(2.374462039406,4.010692661582,+ 9.314404469578E-02));+#8126 = SURFACE_CURVE('',#8127,(#8131,#8138),.PCURVE_S1.);+#8127 = LINE('',#8128,#8129);+#8128 = CARTESIAN_POINT('',(2.374462039411,4.010692661512,0.));+#8129 = VECTOR('',#8130,1.);+#8130 = DIRECTION('',(0.,1.13224958074E-10,1.));+#8131 = PCURVE('',#1748,#8132);+#8132 = DEFINITIONAL_REPRESENTATION('',(#8133),#8137);+#8133 = LINE('',#8134,#8135);+#8134 = CARTESIAN_POINT('',(3.141592653444,9.314404469578E-02));+#8135 = VECTOR('',#8136,1.);+#8136 = DIRECTION('',(-9.057996645917E-10,-1.));+#8137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8138 = PCURVE('',#1715,#8139);+#8139 = DEFINITIONAL_REPRESENTATION('',(#8140),#8144);+#8140 = LINE('',#8141,#8142);+#8141 = CARTESIAN_POINT('',(-0.32499999999,-9.314404469578E-02));+#8142 = VECTOR('',#8143,1.);+#8143 = DIRECTION('',(1.13224958074E-10,1.));+#8144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8145 = ORIENTED_EDGE('',*,*,#8146,.T.);+#8146 = EDGE_CURVE('',#8124,#8075,#8147,.T.);+#8147 = SURFACE_CURVE('',#8148,(#8153,#8159),.PCURVE_S1.);+#8148 = CIRCLE('',#8149,0.125);+#8149 = AXIS2_PLACEMENT_3D('',#8150,#8151,#8152);+#8150 = CARTESIAN_POINT('',(2.249462039406,4.010692661494,+ 9.314404469578E-02));+#8151 = DIRECTION('',(0.,0.,-1.));+#8152 = DIRECTION('',(1.,6.995435342105E-10,0.));+#8153 = PCURVE('',#1748,#8154);+#8154 = DEFINITIONAL_REPRESENTATION('',(#8155),#8158);+#8155 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8156,#8157),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,3.141592653241),.PIECEWISE_BEZIER_KNOTS.);+#8156 = CARTESIAN_POINT('',(3.141592652888,0.));+#8157 = CARTESIAN_POINT('',(6.28318530718,0.));+#8158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8159 = PCURVE('',#6466,#8160);+#8160 = DEFINITIONAL_REPRESENTATION('',(#8161),#8169);+#8161 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8162,#8163,#8164,#8165,+#8166,#8167,#8168),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8162 = CARTESIAN_POINT('',(0.124999999992,-0.204491310441));+#8163 = CARTESIAN_POINT('',(0.125000000143,-0.420997661387));+#8164 = CARTESIAN_POINT('',(-6.249999993227E-02,-0.312744486045));+#8165 = CARTESIAN_POINT('',(-0.250000000008,-0.204491310703));+#8166 = CARTESIAN_POINT('',(-6.250000008373E-02,-9.623813509867E-02));+#8167 = CARTESIAN_POINT('',(0.124999999841,1.201504050555E-02));+#8168 = CARTESIAN_POINT('',(0.124999999992,-0.204491310441));+#8169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8170 = ORIENTED_EDGE('',*,*,#8074,.T.);+#8171 = ADVANCED_FACE('',(#8172),#1715,.F.);+#8172 = FACE_BOUND('',#8173,.F.);+#8173 = EDGE_LOOP('',(#8174,#8175,#8198,#8219));+#8174 = ORIENTED_EDGE('',*,*,#1699,.T.);+#8175 = ORIENTED_EDGE('',*,*,#8176,.T.);+#8176 = EDGE_CURVE('',#1672,#8177,#8179,.T.);+#8177 = VERTEX_POINT('',#8178);+#8178 = CARTESIAN_POINT('',(2.374462039413,4.410692661497,+ 9.314404469578E-02));+#8179 = SURFACE_CURVE('',#8180,(#8184,#8191),.PCURVE_S1.);+#8180 = LINE('',#8181,#8182);+#8181 = CARTESIAN_POINT('',(2.374462039413,4.410692661497,0.));+#8182 = VECTOR('',#8183,1.);+#8183 = DIRECTION('',(0.,0.,1.));+#8184 = PCURVE('',#1715,#8185);+#8185 = DEFINITIONAL_REPRESENTATION('',(#8186),#8190);+#8186 = LINE('',#8187,#8188);+#8187 = CARTESIAN_POINT('',(7.4999999995E-02,-9.314404469578E-02));+#8188 = VECTOR('',#8189,1.);+#8189 = DIRECTION('',(0.,1.));+#8190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8191 = PCURVE('',#1687,#8192);+#8192 = DEFINITIONAL_REPRESENTATION('',(#8193),#8197);+#8193 = LINE('',#8194,#8195);+#8194 = CARTESIAN_POINT('',(8.276472678158E-02,9.314404469578E-02));+#8195 = VECTOR('',#8196,1.);+#8196 = DIRECTION('',(0.,-1.));+#8197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8198 = ORIENTED_EDGE('',*,*,#8199,.F.);+#8199 = EDGE_CURVE('',#8124,#8177,#8200,.T.);+#8200 = SURFACE_CURVE('',#8201,(#8205,#8212),.PCURVE_S1.);+#8201 = LINE('',#8202,#8203);+#8202 = CARTESIAN_POINT('',(2.374462039411,4.010692661523,+ 9.314404469578E-02));+#8203 = VECTOR('',#8204,1.);+#8204 = DIRECTION('',(6.058487045776E-12,1.,0.));+#8205 = PCURVE('',#1715,#8206);+#8206 = DEFINITIONAL_REPRESENTATION('',(#8207),#8211);+#8207 = LINE('',#8208,#8209);+#8208 = CARTESIAN_POINT('',(-0.324999999979,0.));+#8209 = VECTOR('',#8210,1.);+#8210 = DIRECTION('',(1.,0.));+#8211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8212 = PCURVE('',#6466,#8213);+#8213 = DEFINITIONAL_REPRESENTATION('',(#8214),#8218);+#8214 = LINE('',#8215,#8216);+#8215 = CARTESIAN_POINT('',(0.124999999997,-0.204491310499));+#8216 = VECTOR('',#8217,1.);+#8217 = DIRECTION('',(6.058487045776E-12,1.));+#8218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8219 = ORIENTED_EDGE('',*,*,#8123,.F.);+#8220 = ADVANCED_FACE('',(#8221),#1687,.F.);+#8221 = FACE_BOUND('',#8222,.F.);+#8222 = EDGE_LOOP('',(#8223,#8224,#8247,#8268));+#8223 = ORIENTED_EDGE('',*,*,#1671,.F.);+#8224 = ORIENTED_EDGE('',*,*,#8225,.F.);+#8225 = EDGE_CURVE('',#8226,#1644,#8228,.T.);+#8226 = VERTEX_POINT('',#8227);+#8227 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+ 9.314404469578E-02));+#8228 = SURFACE_CURVE('',#8229,(#8233,#8240),.PCURVE_S1.);+#8229 = LINE('',#8230,#8231);+#8230 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+ 9.314404469578E-02));+#8231 = VECTOR('',#8232,1.);+#8232 = DIRECTION('',(0.,0.,-1.));+#8233 = PCURVE('',#1687,#8234);+#8234 = DEFINITIONAL_REPRESENTATION('',(#8235),#8239);+#8235 = LINE('',#8236,#8237);+#8236 = CARTESIAN_POINT('',(0.,0.));+#8237 = VECTOR('',#8238,1.);+#8238 = DIRECTION('',(0.,1.));+#8239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8240 = PCURVE('',#1659,#8241);+#8241 = DEFINITIONAL_REPRESENTATION('',(#8242),#8246);+#8242 = LINE('',#8243,#8244);+#8243 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#8244 = VECTOR('',#8245,1.);+#8245 = DIRECTION('',(1.,0.));+#8246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8247 = ORIENTED_EDGE('',*,*,#8248,.T.);+#8248 = EDGE_CURVE('',#8226,#8177,#8249,.T.);+#8249 = SURFACE_CURVE('',#8250,(#8254,#8261),.PCURVE_S1.);+#8250 = LINE('',#8251,#8252);+#8251 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+ 9.314404469578E-02));+#8252 = VECTOR('',#8253,1.);+#8253 = DIRECTION('',(0.422885465219,-0.906183140048,0.));+#8254 = PCURVE('',#1687,#8255);+#8255 = DEFINITIONAL_REPRESENTATION('',(#8256),#8260);+#8256 = LINE('',#8257,#8258);+#8257 = CARTESIAN_POINT('',(0.,0.));+#8258 = VECTOR('',#8259,1.);+#8259 = DIRECTION('',(1.,0.));+#8260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8261 = PCURVE('',#6466,#8262);+#8262 = DEFINITIONAL_REPRESENTATION('',(#8263),#8267);+#8263 = LINE('',#8264,#8265);+#8264 = CARTESIAN_POINT('',(9.000000001E-02,0.270508689475));+#8265 = VECTOR('',#8266,1.);+#8266 = DIRECTION('',(0.422885465219,-0.906183140048));+#8267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8268 = ORIENTED_EDGE('',*,*,#8176,.F.);+#8269 = ADVANCED_FACE('',(#8270),#1659,.F.);+#8270 = FACE_BOUND('',#8271,.F.);+#8271 = EDGE_LOOP('',(#8272,#8273,#8294,#8295));+#8272 = ORIENTED_EDGE('',*,*,#6585,.T.);+#8273 = ORIENTED_EDGE('',*,*,#8274,.F.);+#8274 = EDGE_CURVE('',#8226,#6563,#8275,.T.);+#8275 = SURFACE_CURVE('',#8276,(#8280,#8287),.PCURVE_S1.);+#8276 = LINE('',#8277,#8278);+#8277 = CARTESIAN_POINT('',(2.339462039424,4.485692661497,+ 9.314404469578E-02));+#8278 = VECTOR('',#8279,1.);+#8279 = DIRECTION('',(0.,1.,0.));+#8280 = PCURVE('',#1659,#8281);+#8281 = DEFINITIONAL_REPRESENTATION('',(#8282),#8286);+#8282 = LINE('',#8283,#8284);+#8283 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#8284 = VECTOR('',#8285,1.);+#8285 = DIRECTION('',(0.,1.));+#8286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8287 = PCURVE('',#6466,#8288);+#8288 = DEFINITIONAL_REPRESENTATION('',(#8289),#8293);+#8289 = LINE('',#8290,#8291);+#8290 = CARTESIAN_POINT('',(9.000000001E-02,0.270508689475));+#8291 = VECTOR('',#8292,1.);+#8292 = DIRECTION('',(0.,1.));+#8293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8294 = ORIENTED_EDGE('',*,*,#8225,.T.);+#8295 = ORIENTED_EDGE('',*,*,#1643,.F.);+#8296 = ADVANCED_FACE('',(#8297),#6466,.F.);+#8297 = FACE_BOUND('',#8298,.F.);+#8298 = EDGE_LOOP('',(#8299,#8300,#8301,#8302,#8303,#8304,#8305,#8306,+ #8307,#8308,#8331,#8359));+#8299 = ORIENTED_EDGE('',*,*,#6450,.F.);+#8300 = ORIENTED_EDGE('',*,*,#8000,.F.);+#8301 = ORIENTED_EDGE('',*,*,#8048,.F.);+#8302 = ORIENTED_EDGE('',*,*,#8097,.T.);+#8303 = ORIENTED_EDGE('',*,*,#8146,.F.);+#8304 = ORIENTED_EDGE('',*,*,#8199,.T.);+#8305 = ORIENTED_EDGE('',*,*,#8248,.F.);+#8306 = ORIENTED_EDGE('',*,*,#8274,.T.);+#8307 = ORIENTED_EDGE('',*,*,#6562,.F.);+#8308 = ORIENTED_EDGE('',*,*,#8309,.T.);+#8309 = EDGE_CURVE('',#6535,#8310,#8312,.T.);+#8310 = VERTEX_POINT('',#8311);+#8311 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,+ 9.314404469578E-02));+#8312 = SURFACE_CURVE('',#8313,(#8317,#8324),.PCURVE_S1.);+#8313 = LINE('',#8314,#8315);+#8314 = CARTESIAN_POINT('',(2.28925867829,4.5,9.314404469578E-02));+#8315 = VECTOR('',#8316,1.);+#8316 = DIRECTION('',(0.,-1.,0.));+#8317 = PCURVE('',#6466,#8318);+#8318 = DEFINITIONAL_REPRESENTATION('',(#8319),#8323);+#8319 = LINE('',#8320,#8321);+#8320 = CARTESIAN_POINT('',(3.9796638876E-02,0.284816027978));+#8321 = VECTOR('',#8322,1.);+#8322 = DIRECTION('',(0.,-1.));+#8323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8324 = PCURVE('',#6550,#8325);+#8325 = DEFINITIONAL_REPRESENTATION('',(#8326),#8330);+#8326 = LINE('',#8327,#8328);+#8327 = CARTESIAN_POINT('',(7.4016088552E-02,0.1));+#8328 = VECTOR('',#8329,1.);+#8329 = DIRECTION('',(-1.,0.));+#8330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8331 = ORIENTED_EDGE('',*,*,#8332,.T.);+#8332 = EDGE_CURVE('',#8310,#8333,#8335,.T.);+#8333 = VERTEX_POINT('',#8334);+#8334 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,+ 9.314404469578E-02));+#8335 = SURFACE_CURVE('',#8336,(#8340,#8347),.PCURVE_S1.);+#8336 = LINE('',#8337,#8338);+#8337 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,+ 9.314404469578E-02));+#8338 = VECTOR('',#8339,1.);+#8339 = DIRECTION('',(-1.,0.,0.));+#8340 = PCURVE('',#6466,#8341);+#8341 = DEFINITIONAL_REPRESENTATION('',(#8342),#8346);+#8342 = LINE('',#8343,#8344);+#8343 = CARTESIAN_POINT('',(3.9796638876E-02,0.223473373328));+#8344 = VECTOR('',#8345,1.);+#8345 = DIRECTION('',(-1.,0.));+#8346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8347 = PCURVE('',#8348,#8353);+#8348 = PLANE('',#8349);+#8349 = AXIS2_PLACEMENT_3D('',#8350,#8351,#8352);+#8350 = CARTESIAN_POINT('',(2.443947504768,4.43865734535,0.193144044696)+ );+#8351 = DIRECTION('',(0.,1.,0.));+#8352 = DIRECTION('',(-1.,0.,0.));+#8353 = DEFINITIONAL_REPRESENTATION('',(#8354),#8358);+#8354 = LINE('',#8355,#8356);+#8355 = CARTESIAN_POINT('',(0.154688826478,-0.1));+#8356 = VECTOR('',#8357,1.);+#8357 = DIRECTION('',(1.,0.));+#8358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8359 = ORIENTED_EDGE('',*,*,#8360,.T.);+#8360 = EDGE_CURVE('',#8333,#6451,#8361,.T.);+#8361 = SURFACE_CURVE('',#8362,(#8366,#8373),.PCURVE_S1.);+#8362 = LINE('',#8363,#8364);+#8363 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,+ 9.314404469578E-02));+#8364 = VECTOR('',#8365,1.);+#8365 = DIRECTION('',(0.,1.,0.));+#8366 = PCURVE('',#6466,#8367);+#8367 = DEFINITIONAL_REPRESENTATION('',(#8368),#8372);+#8368 = LINE('',#8369,#8370);+#8369 = CARTESIAN_POINT('',(-4.0203361122E-02,0.223473373328));+#8370 = VECTOR('',#8371,1.);+#8371 = DIRECTION('',(0.,1.));+#8372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8373 = PCURVE('',#6494,#8374);+#8374 = DEFINITIONAL_REPRESENTATION('',(#8375),#8379);+#8375 = LINE('',#8376,#8377);+#8376 = CARTESIAN_POINT('',(0.122326566098,0.1));+#8377 = VECTOR('',#8378,1.);+#8378 = DIRECTION('',(-1.,0.));+#8379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8380 = ADVANCED_FACE('',(#8381),#6550,.T.);+#8381 = FACE_BOUND('',#8382,.F.);+#8382 = EDGE_LOOP('',(#8383,#8384,#8407,#8428));+#8383 = ORIENTED_EDGE('',*,*,#6534,.F.);+#8384 = ORIENTED_EDGE('',*,*,#8385,.F.);+#8385 = EDGE_CURVE('',#8386,#6507,#8388,.T.);+#8386 = VERTEX_POINT('',#8387);+#8387 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,0.193144044696)+ );+#8388 = SURFACE_CURVE('',#8389,(#8393,#8400),.PCURVE_S1.);+#8389 = LINE('',#8390,#8391);+#8390 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,0.193144044696)+ );+#8391 = VECTOR('',#8392,1.);+#8392 = DIRECTION('',(0.,1.,0.));+#8393 = PCURVE('',#6550,#8394);+#8394 = DEFINITIONAL_REPRESENTATION('',(#8395),#8399);+#8395 = LINE('',#8396,#8397);+#8396 = CARTESIAN_POINT('',(1.2673433902E-02,0.));+#8397 = VECTOR('',#8398,1.);+#8398 = DIRECTION('',(1.,0.));+#8399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8400 = PCURVE('',#6522,#8401);+#8401 = DEFINITIONAL_REPRESENTATION('',(#8402),#8406);+#8402 = LINE('',#8403,#8404);+#8403 = CARTESIAN_POINT('',(3.744580993E-02,0.2722675596));+#8404 = VECTOR('',#8405,1.);+#8405 = DIRECTION('',(0.,1.));+#8406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8407 = ORIENTED_EDGE('',*,*,#8408,.T.);+#8408 = EDGE_CURVE('',#8386,#8310,#8409,.T.);+#8409 = SURFACE_CURVE('',#8410,(#8414,#8421),.PCURVE_S1.);+#8410 = LINE('',#8411,#8412);+#8411 = CARTESIAN_POINT('',(2.28925867829,4.43865734535,0.193144044696)+ );+#8412 = VECTOR('',#8413,1.);+#8413 = DIRECTION('',(0.,0.,-1.));+#8414 = PCURVE('',#6550,#8415);+#8415 = DEFINITIONAL_REPRESENTATION('',(#8416),#8420);+#8416 = LINE('',#8417,#8418);+#8417 = CARTESIAN_POINT('',(1.2673433902E-02,0.));+#8418 = VECTOR('',#8419,1.);+#8419 = DIRECTION('',(0.,1.));+#8420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8421 = PCURVE('',#8348,#8422);+#8422 = DEFINITIONAL_REPRESENTATION('',(#8423),#8427);+#8423 = LINE('',#8424,#8425);+#8424 = CARTESIAN_POINT('',(0.154688826478,0.));+#8425 = VECTOR('',#8426,1.);+#8426 = DIRECTION('',(0.,-1.));+#8427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8428 = ORIENTED_EDGE('',*,*,#8309,.F.);+#8429 = ADVANCED_FACE('',(#8430),#6522,.F.);+#8430 = FACE_BOUND('',#8431,.F.);+#8431 = EDGE_LOOP('',(#8432,#8433,#8456,#8477));+#8432 = ORIENTED_EDGE('',*,*,#6506,.F.);+#8433 = ORIENTED_EDGE('',*,*,#8434,.F.);+#8434 = EDGE_CURVE('',#8435,#6479,#8437,.T.);+#8435 = VERTEX_POINT('',#8436);+#8436 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+ );+#8437 = SURFACE_CURVE('',#8438,(#8442,#8449),.PCURVE_S1.);+#8438 = LINE('',#8439,#8440);+#8439 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+ );+#8440 = VECTOR('',#8441,1.);+#8441 = DIRECTION('',(0.,1.,0.));+#8442 = PCURVE('',#6522,#8443);+#8443 = DEFINITIONAL_REPRESENTATION('',(#8444),#8448);+#8444 = LINE('',#8445,#8446);+#8445 = CARTESIAN_POINT('',(-4.2554190068E-02,0.2722675596));+#8446 = VECTOR('',#8447,1.);+#8447 = DIRECTION('',(0.,1.));+#8448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8449 = PCURVE('',#6494,#8450);+#8450 = DEFINITIONAL_REPRESENTATION('',(#8451),#8455);+#8451 = LINE('',#8452,#8453);+#8452 = CARTESIAN_POINT('',(0.122326566098,0.));+#8453 = VECTOR('',#8454,1.);+#8454 = DIRECTION('',(-1.,0.));+#8455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8456 = ORIENTED_EDGE('',*,*,#8457,.T.);+#8457 = EDGE_CURVE('',#8435,#8386,#8458,.T.);+#8458 = SURFACE_CURVE('',#8459,(#8463,#8470),.PCURVE_S1.);+#8459 = LINE('',#8460,#8461);+#8460 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+ );+#8461 = VECTOR('',#8462,1.);+#8462 = DIRECTION('',(1.,0.,0.));+#8463 = PCURVE('',#6522,#8464);+#8464 = DEFINITIONAL_REPRESENTATION('',(#8465),#8469);+#8465 = LINE('',#8466,#8467);+#8466 = CARTESIAN_POINT('',(-4.2554190068E-02,0.2722675596));+#8467 = VECTOR('',#8468,1.);+#8468 = DIRECTION('',(1.,0.));+#8469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8470 = PCURVE('',#8348,#8471);+#8471 = DEFINITIONAL_REPRESENTATION('',(#8472),#8476);+#8472 = LINE('',#8473,#8474);+#8473 = CARTESIAN_POINT('',(0.234688826476,0.));+#8474 = VECTOR('',#8475,1.);+#8475 = DIRECTION('',(-1.,0.));+#8476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8477 = ORIENTED_EDGE('',*,*,#8385,.T.);+#8478 = ADVANCED_FACE('',(#8479),#6494,.T.);+#8479 = FACE_BOUND('',#8480,.F.);+#8480 = EDGE_LOOP('',(#8481,#8482,#8483,#8504));+#8481 = ORIENTED_EDGE('',*,*,#6478,.T.);+#8482 = ORIENTED_EDGE('',*,*,#8360,.F.);+#8483 = ORIENTED_EDGE('',*,*,#8484,.F.);+#8484 = EDGE_CURVE('',#8435,#8333,#8485,.T.);+#8485 = SURFACE_CURVE('',#8486,(#8490,#8497),.PCURVE_S1.);+#8486 = LINE('',#8487,#8488);+#8487 = CARTESIAN_POINT('',(2.209258678292,4.43865734535,0.193144044696)+ );+#8488 = VECTOR('',#8489,1.);+#8489 = DIRECTION('',(0.,0.,-1.));+#8490 = PCURVE('',#6494,#8491);+#8491 = DEFINITIONAL_REPRESENTATION('',(#8492),#8496);+#8492 = LINE('',#8493,#8494);+#8493 = CARTESIAN_POINT('',(0.122326566098,0.));+#8494 = VECTOR('',#8495,1.);+#8495 = DIRECTION('',(0.,1.));+#8496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8497 = PCURVE('',#8348,#8498);+#8498 = DEFINITIONAL_REPRESENTATION('',(#8499),#8503);+#8499 = LINE('',#8500,#8501);+#8500 = CARTESIAN_POINT('',(0.234688826476,0.));+#8501 = VECTOR('',#8502,1.);+#8502 = DIRECTION('',(0.,-1.));+#8503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8504 = ORIENTED_EDGE('',*,*,#8434,.T.);+#8505 = ADVANCED_FACE('',(#8506),#8348,.T.);+#8506 = FACE_BOUND('',#8507,.F.);+#8507 = EDGE_LOOP('',(#8508,#8509,#8510,#8511));+#8508 = ORIENTED_EDGE('',*,*,#8408,.F.);+#8509 = ORIENTED_EDGE('',*,*,#8457,.F.);+#8510 = ORIENTED_EDGE('',*,*,#8484,.T.);+#8511 = ORIENTED_EDGE('',*,*,#8332,.F.);+#8512 = ADVANCED_FACE('',(#8513),#221,.T.);+#8513 = FACE_BOUND('',#8514,.F.);+#8514 = EDGE_LOOP('',(#8515,#8545,#8566,#8567,#8568,#8569,#8570,#8571,+ #8594,#8622,#8650,#8678,#8706,#8729,#8750,#8751,#8774,#8802,#8830,+ #8858,#8886,#8909,#8930,#8931,#8954,#8982,#9010,#9038,#9066,#9089,+ #9110,#9111,#9134,#9157,#9185,#9213,#9241,#9264,#9285,#9286,#9309,+ #9332,#9360,#9388,#9416,#9439,#9460,#9461,#9484,#9507,#9535,#9563,+ #9591,#9614,#9635,#9636,#9659,#9682,#9710,#9738));+#8515 = ORIENTED_EDGE('',*,*,#8516,.F.);+#8516 = EDGE_CURVE('',#8517,#8519,#8521,.T.);+#8517 = VERTEX_POINT('',#8518);+#8518 = CARTESIAN_POINT('',(3.5,0.345943712857,9.314404469578E-02));+#8519 = VERTEX_POINT('',#8520);+#8520 = CARTESIAN_POINT('',(3.5,0.395983918053,9.314404469578E-02));+#8521 = SURFACE_CURVE('',#8522,(#8526,#8533),.PCURVE_S1.);+#8522 = LINE('',#8523,#8524);+#8523 = CARTESIAN_POINT('',(3.5,0.345943712857,9.314404469578E-02));+#8524 = VECTOR('',#8525,1.);+#8525 = DIRECTION('',(0.,1.,0.));+#8526 = PCURVE('',#221,#8527);+#8527 = DEFINITIONAL_REPRESENTATION('',(#8528),#8532);+#8528 = LINE('',#8529,#8530);+#8529 = CARTESIAN_POINT('',(0.345943712857,9.314404469578E-02));+#8530 = VECTOR('',#8531,1.);+#8531 = DIRECTION('',(1.,0.));+#8532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8533 = PCURVE('',#8534,#8539);+#8534 = PLANE('',#8535);+#8535 = AXIS2_PLACEMENT_3D('',#8536,#8537,#8538);+#8536 = CARTESIAN_POINT('',(3.081382693608,2.885692661495,+ 9.314404469578E-02));+#8537 = DIRECTION('',(0.,0.,1.));+#8538 = DIRECTION('',(1.,0.,-0.));+#8539 = DEFINITIONAL_REPRESENTATION('',(#8540),#8544);+#8540 = LINE('',#8541,#8542);+#8541 = CARTESIAN_POINT('',(0.418617306392,-2.539748948638));+#8542 = VECTOR('',#8543,1.);+#8543 = DIRECTION('',(0.,1.));+#8544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8545 = ORIENTED_EDGE('',*,*,#8546,.F.);+#8546 = EDGE_CURVE('',#3261,#8517,#8547,.T.);+#8547 = SURFACE_CURVE('',#8548,(#8552,#8559),.PCURVE_S1.);+#8548 = LINE('',#8549,#8550);+#8549 = CARTESIAN_POINT('',(3.5,0.345943712857,0.));+#8550 = VECTOR('',#8551,1.);+#8551 = DIRECTION('',(0.,0.,1.));+#8552 = PCURVE('',#221,#8553);+#8553 = DEFINITIONAL_REPRESENTATION('',(#8554),#8558);+#8554 = LINE('',#8555,#8556);+#8555 = CARTESIAN_POINT('',(0.345943712857,0.));+#8556 = VECTOR('',#8557,1.);+#8557 = DIRECTION('',(0.,1.));+#8558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8559 = PCURVE('',#3299,#8560);+#8560 = DEFINITIONAL_REPRESENTATION('',(#8561),#8565);+#8561 = LINE('',#8562,#8563);+#8562 = CARTESIAN_POINT('',(8.335838955681E-02,-9.314404469578E-02));+#8563 = VECTOR('',#8564,1.);+#8564 = DIRECTION('',(0.,1.));+#8565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8566 = ORIENTED_EDGE('',*,*,#3260,.T.);+#8567 = ORIENTED_EDGE('',*,*,#288,.F.);+#8568 = ORIENTED_EDGE('',*,*,#207,.F.);+#8569 = ORIENTED_EDGE('',*,*,#6607,.T.);+#8570 = ORIENTED_EDGE('',*,*,#1597,.T.);+#8571 = ORIENTED_EDGE('',*,*,#8572,.T.);+#8572 = EDGE_CURVE('',#1570,#8573,#8575,.T.);+#8573 = VERTEX_POINT('',#8574);+#8574 = CARTESIAN_POINT('',(3.5,4.225441613226,9.314404469578E-02));+#8575 = SURFACE_CURVE('',#8576,(#8580,#8587),.PCURVE_S1.);+#8576 = LINE('',#8577,#8578);+#8577 = CARTESIAN_POINT('',(3.5,4.225441613226,0.));+#8578 = VECTOR('',#8579,1.);+#8579 = DIRECTION('',(0.,0.,1.));+#8580 = PCURVE('',#221,#8581);+#8581 = DEFINITIONAL_REPRESENTATION('',(#8582),#8586);+#8582 = LINE('',#8583,#8584);+#8583 = CARTESIAN_POINT('',(4.225441613226,0.));+#8584 = VECTOR('',#8585,1.);+#8585 = DIRECTION('',(0.,1.));+#8586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8587 = PCURVE('',#1585,#8588);+#8588 = DEFINITIONAL_REPRESENTATION('',(#8589),#8593);+#8589 = LINE('',#8590,#8591);+#8590 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#8591 = VECTOR('',#8592,1.);+#8592 = DIRECTION('',(0.,-1.));+#8593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8594 = ORIENTED_EDGE('',*,*,#8595,.F.);+#8595 = EDGE_CURVE('',#8596,#8573,#8598,.T.);+#8596 = VERTEX_POINT('',#8597);+#8597 = CARTESIAN_POINT('',(3.5,4.175983918045,9.314404469578E-02));+#8598 = SURFACE_CURVE('',#8599,(#8603,#8610),.PCURVE_S1.);+#8599 = LINE('',#8600,#8601);+#8600 = CARTESIAN_POINT('',(3.5,4.175983918045,9.314404469578E-02));+#8601 = VECTOR('',#8602,1.);+#8602 = DIRECTION('',(0.,1.,0.));+#8603 = PCURVE('',#221,#8604);+#8604 = DEFINITIONAL_REPRESENTATION('',(#8605),#8609);+#8605 = LINE('',#8606,#8607);+#8606 = CARTESIAN_POINT('',(4.175983918045,9.314404469578E-02));+#8607 = VECTOR('',#8608,1.);+#8608 = DIRECTION('',(1.,0.));+#8609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8610 = PCURVE('',#8611,#8616);+#8611 = PLANE('',#8612);+#8612 = AXIS2_PLACEMENT_3D('',#8613,#8614,#8615);+#8613 = CARTESIAN_POINT('',(3.031489382077,4.195389983861,+ 9.314404469578E-02));+#8614 = DIRECTION('',(0.,0.,1.));+#8615 = DIRECTION('',(1.,0.,-0.));+#8616 = DEFINITIONAL_REPRESENTATION('',(#8617),#8621);+#8617 = LINE('',#8618,#8619);+#8618 = CARTESIAN_POINT('',(0.468510617923,-1.9406065816E-02));+#8619 = VECTOR('',#8620,1.);+#8620 = DIRECTION('',(0.,1.));+#8621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8622 = ORIENTED_EDGE('',*,*,#8623,.F.);+#8623 = EDGE_CURVE('',#8624,#8596,#8626,.T.);+#8624 = VERTEX_POINT('',#8625);+#8625 = CARTESIAN_POINT('',(3.5,4.175983918045,0.193144044696));+#8626 = SURFACE_CURVE('',#8627,(#8631,#8638),.PCURVE_S1.);+#8627 = LINE('',#8628,#8629);+#8628 = CARTESIAN_POINT('',(3.5,4.175983918045,0.193144044696));+#8629 = VECTOR('',#8630,1.);+#8630 = DIRECTION('',(0.,0.,-1.));+#8631 = PCURVE('',#221,#8632);+#8632 = DEFINITIONAL_REPRESENTATION('',(#8633),#8637);+#8633 = LINE('',#8634,#8635);+#8634 = CARTESIAN_POINT('',(4.175983918045,0.193144044696));+#8635 = VECTOR('',#8636,1.);+#8636 = DIRECTION('',(0.,-1.));+#8637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8638 = PCURVE('',#8639,#8644);+#8639 = PLANE('',#8640);+#8640 = AXIS2_PLACEMENT_3D('',#8641,#8642,#8643);+#8641 = CARTESIAN_POINT('',(3.574258671695,4.175983918045,0.193144044696+ ));+#8642 = DIRECTION('',(0.,-1.,0.));+#8643 = DIRECTION('',(-1.,0.,0.));+#8644 = DEFINITIONAL_REPRESENTATION('',(#8645),#8649);+#8645 = LINE('',#8646,#8647);+#8646 = CARTESIAN_POINT('',(7.4258671695E-02,0.));+#8647 = VECTOR('',#8648,1.);+#8648 = DIRECTION('',(0.,1.));+#8649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8650 = ORIENTED_EDGE('',*,*,#8651,.F.);+#8651 = EDGE_CURVE('',#8652,#8624,#8654,.T.);+#8652 = VERTEX_POINT('',#8653);+#8653 = CARTESIAN_POINT('',(3.5,4.095983918047,0.193144044696));+#8654 = SURFACE_CURVE('',#8655,(#8659,#8666),.PCURVE_S1.);+#8655 = LINE('',#8656,#8657);+#8656 = CARTESIAN_POINT('',(3.5,4.095983918047,0.193144044696));+#8657 = VECTOR('',#8658,1.);+#8658 = DIRECTION('',(0.,1.,0.));+#8659 = PCURVE('',#221,#8660);+#8660 = DEFINITIONAL_REPRESENTATION('',(#8661),#8665);+#8661 = LINE('',#8662,#8663);+#8662 = CARTESIAN_POINT('',(4.095983918047,0.193144044696));+#8663 = VECTOR('',#8664,1.);+#8664 = DIRECTION('',(1.,0.));+#8665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8666 = PCURVE('',#8667,#8672);+#8667 = PLANE('',#8668);+#8668 = AXIS2_PLACEMENT_3D('',#8669,#8670,#8671);+#8669 = CARTESIAN_POINT('',(2.808430401428,4.009344833768,0.193144044696+ ));+#8670 = DIRECTION('',(0.,0.,1.));+#8671 = DIRECTION('',(1.,0.,-0.));+#8672 = DEFINITIONAL_REPRESENTATION('',(#8673),#8677);+#8673 = LINE('',#8674,#8675);+#8674 = CARTESIAN_POINT('',(0.691569598572,8.6639084279E-02));+#8675 = VECTOR('',#8676,1.);+#8676 = DIRECTION('',(0.,1.));+#8677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8678 = ORIENTED_EDGE('',*,*,#8679,.T.);+#8679 = EDGE_CURVE('',#8652,#8680,#8682,.T.);+#8680 = VERTEX_POINT('',#8681);+#8681 = CARTESIAN_POINT('',(3.5,4.095983918047,9.314404469578E-02));+#8682 = SURFACE_CURVE('',#8683,(#8687,#8694),.PCURVE_S1.);+#8683 = LINE('',#8684,#8685);+#8684 = CARTESIAN_POINT('',(3.5,4.095983918047,0.193144044696));+#8685 = VECTOR('',#8686,1.);+#8686 = DIRECTION('',(0.,0.,-1.));+#8687 = PCURVE('',#221,#8688);+#8688 = DEFINITIONAL_REPRESENTATION('',(#8689),#8693);+#8689 = LINE('',#8690,#8691);+#8690 = CARTESIAN_POINT('',(4.095983918047,0.193144044696));+#8691 = VECTOR('',#8692,1.);+#8692 = DIRECTION('',(0.,-1.));+#8693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8694 = PCURVE('',#8695,#8700);+#8695 = PLANE('',#8696);+#8696 = AXIS2_PLACEMENT_3D('',#8697,#8698,#8699);+#8697 = CARTESIAN_POINT('',(3.439258671685,4.095983918047,0.193144044696+ ));+#8698 = DIRECTION('',(0.,1.,0.));+#8699 = DIRECTION('',(1.,0.,0.));+#8700 = DEFINITIONAL_REPRESENTATION('',(#8701),#8705);+#8701 = LINE('',#8702,#8703);+#8702 = CARTESIAN_POINT('',(6.0741328315E-02,0.));+#8703 = VECTOR('',#8704,1.);+#8704 = DIRECTION('',(0.,1.));+#8705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8706 = ORIENTED_EDGE('',*,*,#8707,.F.);+#8707 = EDGE_CURVE('',#8708,#8680,#8710,.T.);+#8708 = VERTEX_POINT('',#8709);+#8709 = CARTESIAN_POINT('',(3.5,4.045943712856,9.314404469578E-02));+#8710 = SURFACE_CURVE('',#8711,(#8715,#8722),.PCURVE_S1.);+#8711 = LINE('',#8712,#8713);+#8712 = CARTESIAN_POINT('',(3.5,4.045943712856,9.314404469578E-02));+#8713 = VECTOR('',#8714,1.);+#8714 = DIRECTION('',(0.,1.,0.));+#8715 = PCURVE('',#221,#8716);+#8716 = DEFINITIONAL_REPRESENTATION('',(#8717),#8721);+#8717 = LINE('',#8718,#8719);+#8718 = CARTESIAN_POINT('',(4.045943712856,9.314404469578E-02));+#8719 = VECTOR('',#8720,1.);+#8720 = DIRECTION('',(1.,0.));+#8721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8722 = PCURVE('',#8611,#8723);+#8723 = DEFINITIONAL_REPRESENTATION('',(#8724),#8728);+#8724 = LINE('',#8725,#8726);+#8725 = CARTESIAN_POINT('',(0.468510617923,-0.149446271005));+#8726 = VECTOR('',#8727,1.);+#8727 = DIRECTION('',(0.,1.));+#8728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8729 = ORIENTED_EDGE('',*,*,#8730,.F.);+#8730 = EDGE_CURVE('',#1313,#8708,#8731,.T.);+#8731 = SURFACE_CURVE('',#8732,(#8736,#8743),.PCURVE_S1.);+#8732 = LINE('',#8733,#8734);+#8733 = CARTESIAN_POINT('',(3.5,4.045943712856,0.));+#8734 = VECTOR('',#8735,1.);+#8735 = DIRECTION('',(0.,0.,1.));+#8736 = PCURVE('',#221,#8737);+#8737 = DEFINITIONAL_REPRESENTATION('',(#8738),#8742);+#8738 = LINE('',#8739,#8740);+#8739 = CARTESIAN_POINT('',(4.045943712856,0.));+#8740 = VECTOR('',#8741,1.);+#8741 = DIRECTION('',(0.,1.));+#8742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8743 = PCURVE('',#1351,#8744);+#8744 = DEFINITIONAL_REPRESENTATION('',(#8745),#8749);+#8745 = LINE('',#8746,#8747);+#8746 = CARTESIAN_POINT('',(8.335838955724E-02,-9.314404469578E-02));+#8747 = VECTOR('',#8748,1.);+#8748 = DIRECTION('',(0.,1.));+#8749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8750 = ORIENTED_EDGE('',*,*,#1312,.T.);+#8751 = ORIENTED_EDGE('',*,*,#8752,.T.);+#8752 = EDGE_CURVE('',#1285,#8753,#8755,.T.);+#8753 = VERTEX_POINT('',#8754);+#8754 = CARTESIAN_POINT('',(3.5,3.475441613231,9.314404469578E-02));+#8755 = SURFACE_CURVE('',#8756,(#8760,#8767),.PCURVE_S1.);+#8756 = LINE('',#8757,#8758);+#8757 = CARTESIAN_POINT('',(3.5,3.475441613231,0.));+#8758 = VECTOR('',#8759,1.);+#8759 = DIRECTION('',(0.,0.,1.));+#8760 = PCURVE('',#221,#8761);+#8761 = DEFINITIONAL_REPRESENTATION('',(#8762),#8766);+#8762 = LINE('',#8763,#8764);+#8763 = CARTESIAN_POINT('',(3.475441613231,0.));+#8764 = VECTOR('',#8765,1.);+#8765 = DIRECTION('',(0.,1.));+#8766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8767 = PCURVE('',#1300,#8768);+#8768 = DEFINITIONAL_REPRESENTATION('',(#8769),#8773);+#8769 = LINE('',#8770,#8771);+#8770 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#8771 = VECTOR('',#8772,1.);+#8772 = DIRECTION('',(0.,1.));+#8773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8774 = ORIENTED_EDGE('',*,*,#8775,.F.);+#8775 = EDGE_CURVE('',#8776,#8753,#8778,.T.);+#8776 = VERTEX_POINT('',#8777);+#8777 = CARTESIAN_POINT('',(3.5,3.425983916501,9.314404469578E-02));+#8778 = SURFACE_CURVE('',#8779,(#8783,#8790),.PCURVE_S1.);+#8779 = LINE('',#8780,#8781);+#8780 = CARTESIAN_POINT('',(3.5,3.425983916501,9.314404469578E-02));+#8781 = VECTOR('',#8782,1.);+#8782 = DIRECTION('',(0.,1.,0.));+#8783 = PCURVE('',#221,#8784);+#8784 = DEFINITIONAL_REPRESENTATION('',(#8785),#8789);+#8785 = LINE('',#8786,#8787);+#8786 = CARTESIAN_POINT('',(3.425983916501,9.314404469578E-02));+#8787 = VECTOR('',#8788,1.);+#8788 = DIRECTION('',(1.,0.));+#8789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8790 = PCURVE('',#8791,#8796);+#8791 = PLANE('',#8792);+#8792 = AXIS2_PLACEMENT_3D('',#8793,#8794,#8795);+#8793 = CARTESIAN_POINT('',(3.081382693608,3.385692661495,+ 9.314404469578E-02));+#8794 = DIRECTION('',(0.,0.,1.));+#8795 = DIRECTION('',(1.,0.,-0.));+#8796 = DEFINITIONAL_REPRESENTATION('',(#8797),#8801);+#8797 = LINE('',#8798,#8799);+#8798 = CARTESIAN_POINT('',(0.418617306392,4.0291255006E-02));+#8799 = VECTOR('',#8800,1.);+#8800 = DIRECTION('',(0.,1.));+#8801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8802 = ORIENTED_EDGE('',*,*,#8803,.F.);+#8803 = EDGE_CURVE('',#8804,#8776,#8806,.T.);+#8804 = VERTEX_POINT('',#8805);+#8805 = CARTESIAN_POINT('',(3.5,3.425983916501,0.193144044696));+#8806 = SURFACE_CURVE('',#8807,(#8811,#8818),.PCURVE_S1.);+#8807 = LINE('',#8808,#8809);+#8808 = CARTESIAN_POINT('',(3.5,3.425983916501,0.193144044696));+#8809 = VECTOR('',#8810,1.);+#8810 = DIRECTION('',(0.,0.,-1.));+#8811 = PCURVE('',#221,#8812);+#8812 = DEFINITIONAL_REPRESENTATION('',(#8813),#8817);+#8813 = LINE('',#8814,#8815);+#8814 = CARTESIAN_POINT('',(3.425983916501,0.193144044696));+#8815 = VECTOR('',#8816,1.);+#8816 = DIRECTION('',(0.,-1.));+#8817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8818 = PCURVE('',#8819,#8824);+#8819 = PLANE('',#8820);+#8820 = AXIS2_PLACEMENT_3D('',#8821,#8822,#8823);+#8821 = CARTESIAN_POINT('',(3.574258675005,3.425983916501,0.193144044696+ ));+#8822 = DIRECTION('',(0.,-1.,0.));+#8823 = DIRECTION('',(-1.,0.,0.));+#8824 = DEFINITIONAL_REPRESENTATION('',(#8825),#8829);+#8825 = LINE('',#8826,#8827);+#8826 = CARTESIAN_POINT('',(7.4258675005E-02,0.));+#8827 = VECTOR('',#8828,1.);+#8828 = DIRECTION('',(0.,1.));+#8829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8830 = ORIENTED_EDGE('',*,*,#8831,.F.);+#8831 = EDGE_CURVE('',#8832,#8804,#8834,.T.);+#8832 = VERTEX_POINT('',#8833);+#8833 = CARTESIAN_POINT('',(3.5,3.345983916503,0.193144044696));+#8834 = SURFACE_CURVE('',#8835,(#8839,#8846),.PCURVE_S1.);+#8835 = LINE('',#8836,#8837);+#8836 = CARTESIAN_POINT('',(3.5,3.345983916503,0.193144044696));+#8837 = VECTOR('',#8838,1.);+#8838 = DIRECTION('',(0.,1.,0.));+#8839 = PCURVE('',#221,#8840);+#8840 = DEFINITIONAL_REPRESENTATION('',(#8841),#8845);+#8841 = LINE('',#8842,#8843);+#8842 = CARTESIAN_POINT('',(3.345983916503,0.193144044696));+#8843 = VECTOR('',#8844,1.);+#8844 = DIRECTION('',(1.,0.));+#8845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8846 = PCURVE('',#8847,#8852);+#8847 = PLANE('',#8848);+#8848 = AXIS2_PLACEMENT_3D('',#8849,#8850,#8851);+#8849 = CARTESIAN_POINT('',(2.845614862582,3.353072849675,0.193144044696+ ));+#8850 = DIRECTION('',(0.,0.,1.));+#8851 = DIRECTION('',(1.,0.,-0.));+#8852 = DEFINITIONAL_REPRESENTATION('',(#8853),#8857);+#8853 = LINE('',#8854,#8855);+#8854 = CARTESIAN_POINT('',(0.654385137418,-7.088933172E-03));+#8855 = VECTOR('',#8856,1.);+#8856 = DIRECTION('',(0.,1.));+#8857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8858 = ORIENTED_EDGE('',*,*,#8859,.T.);+#8859 = EDGE_CURVE('',#8832,#8860,#8862,.T.);+#8860 = VERTEX_POINT('',#8861);+#8861 = CARTESIAN_POINT('',(3.5,3.345983916503,9.314404469578E-02));+#8862 = SURFACE_CURVE('',#8863,(#8867,#8874),.PCURVE_S1.);+#8863 = LINE('',#8864,#8865);+#8864 = CARTESIAN_POINT('',(3.5,3.345983916503,0.193144044696));+#8865 = VECTOR('',#8866,1.);+#8866 = DIRECTION('',(0.,0.,-1.));+#8867 = PCURVE('',#221,#8868);+#8868 = DEFINITIONAL_REPRESENTATION('',(#8869),#8873);+#8869 = LINE('',#8870,#8871);+#8870 = CARTESIAN_POINT('',(3.345983916503,0.193144044696));+#8871 = VECTOR('',#8872,1.);+#8872 = DIRECTION('',(0.,-1.));+#8873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8874 = PCURVE('',#8875,#8880);+#8875 = PLANE('',#8876);+#8876 = AXIS2_PLACEMENT_3D('',#8877,#8878,#8879);+#8877 = CARTESIAN_POINT('',(3.439258674996,3.345983916503,0.193144044696+ ));+#8878 = DIRECTION('',(0.,1.,0.));+#8879 = DIRECTION('',(1.,0.,0.));+#8880 = DEFINITIONAL_REPRESENTATION('',(#8881),#8885);+#8881 = LINE('',#8882,#8883);+#8882 = CARTESIAN_POINT('',(6.0741325004E-02,0.));+#8883 = VECTOR('',#8884,1.);+#8884 = DIRECTION('',(0.,1.));+#8885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8886 = ORIENTED_EDGE('',*,*,#8887,.F.);+#8887 = EDGE_CURVE('',#8888,#8860,#8890,.T.);+#8888 = VERTEX_POINT('',#8889);+#8889 = CARTESIAN_POINT('',(3.5,3.295943709768,9.314404469578E-02));+#8890 = SURFACE_CURVE('',#8891,(#8895,#8902),.PCURVE_S1.);+#8891 = LINE('',#8892,#8893);+#8892 = CARTESIAN_POINT('',(3.5,3.295943709768,9.314404469578E-02));+#8893 = VECTOR('',#8894,1.);+#8894 = DIRECTION('',(0.,1.,0.));+#8895 = PCURVE('',#221,#8896);+#8896 = DEFINITIONAL_REPRESENTATION('',(#8897),#8901);+#8897 = LINE('',#8898,#8899);+#8898 = CARTESIAN_POINT('',(3.295943709768,9.314404469578E-02));+#8899 = VECTOR('',#8900,1.);+#8900 = DIRECTION('',(1.,0.));+#8901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8902 = PCURVE('',#8791,#8903);+#8903 = DEFINITIONAL_REPRESENTATION('',(#8904),#8908);+#8904 = LINE('',#8905,#8906);+#8905 = CARTESIAN_POINT('',(0.418617306392,-8.9748951727E-02));+#8906 = VECTOR('',#8907,1.);+#8907 = DIRECTION('',(0.,1.));+#8908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8909 = ORIENTED_EDGE('',*,*,#8910,.F.);+#8910 = EDGE_CURVE('',#1145,#8888,#8911,.T.);+#8911 = SURFACE_CURVE('',#8912,(#8916,#8923),.PCURVE_S1.);+#8912 = LINE('',#8913,#8914);+#8913 = CARTESIAN_POINT('',(3.5,3.295943709768,0.));+#8914 = VECTOR('',#8915,1.);+#8915 = DIRECTION('',(0.,0.,1.));+#8916 = PCURVE('',#221,#8917);+#8917 = DEFINITIONAL_REPRESENTATION('',(#8918),#8922);+#8918 = LINE('',#8919,#8920);+#8919 = CARTESIAN_POINT('',(3.295943709768,0.));+#8920 = VECTOR('',#8921,1.);+#8921 = DIRECTION('',(0.,1.));+#8922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8923 = PCURVE('',#1183,#8924);+#8924 = DEFINITIONAL_REPRESENTATION('',(#8925),#8929);+#8925 = LINE('',#8926,#8927);+#8926 = CARTESIAN_POINT('',(8.335838225449E-02,-9.314404469578E-02));+#8927 = VECTOR('',#8928,1.);+#8928 = DIRECTION('',(0.,1.));+#8929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8930 = ORIENTED_EDGE('',*,*,#1144,.T.);+#8931 = ORIENTED_EDGE('',*,*,#8932,.T.);+#8932 = EDGE_CURVE('',#1117,#8933,#8935,.T.);+#8933 = VERTEX_POINT('',#8934);+#8934 = CARTESIAN_POINT('',(3.5,2.975441613229,9.314404469578E-02));+#8935 = SURFACE_CURVE('',#8936,(#8940,#8947),.PCURVE_S1.);+#8936 = LINE('',#8937,#8938);+#8937 = CARTESIAN_POINT('',(3.5,2.975441613229,0.));+#8938 = VECTOR('',#8939,1.);+#8939 = DIRECTION('',(0.,0.,1.));+#8940 = PCURVE('',#221,#8941);+#8941 = DEFINITIONAL_REPRESENTATION('',(#8942),#8946);+#8942 = LINE('',#8943,#8944);+#8943 = CARTESIAN_POINT('',(2.975441613229,0.));+#8944 = VECTOR('',#8945,1.);+#8945 = DIRECTION('',(0.,1.));+#8946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8947 = PCURVE('',#1132,#8948);+#8948 = DEFINITIONAL_REPRESENTATION('',(#8949),#8953);+#8949 = LINE('',#8950,#8951);+#8950 = CARTESIAN_POINT('',(-5.936554680099E-04,-9.314404469578E-02));+#8951 = VECTOR('',#8952,1.);+#8952 = DIRECTION('',(0.,1.));+#8953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8954 = ORIENTED_EDGE('',*,*,#8955,.F.);+#8955 = EDGE_CURVE('',#8956,#8933,#8958,.T.);+#8956 = VERTEX_POINT('',#8957);+#8957 = CARTESIAN_POINT('',(3.5,2.925983916503,9.314404469578E-02));+#8958 = SURFACE_CURVE('',#8959,(#8963,#8970),.PCURVE_S1.);+#8959 = LINE('',#8960,#8961);+#8960 = CARTESIAN_POINT('',(3.5,2.925983916503,9.314404469578E-02));+#8961 = VECTOR('',#8962,1.);+#8962 = DIRECTION('',(0.,1.,0.));+#8963 = PCURVE('',#221,#8964);+#8964 = DEFINITIONAL_REPRESENTATION('',(#8965),#8969);+#8965 = LINE('',#8966,#8967);+#8966 = CARTESIAN_POINT('',(2.925983916503,9.314404469578E-02));+#8967 = VECTOR('',#8968,1.);+#8968 = DIRECTION('',(1.,0.));+#8969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8970 = PCURVE('',#8971,#8976);+#8971 = PLANE('',#8972);+#8972 = AXIS2_PLACEMENT_3D('',#8973,#8974,#8975);+#8973 = CARTESIAN_POINT('',(3.081382693608,2.885692661495,+ 9.314404469578E-02));+#8974 = DIRECTION('',(0.,0.,1.));+#8975 = DIRECTION('',(1.,0.,-0.));+#8976 = DEFINITIONAL_REPRESENTATION('',(#8977),#8981);+#8977 = LINE('',#8978,#8979);+#8978 = CARTESIAN_POINT('',(0.418617306392,4.0291255008E-02));+#8979 = VECTOR('',#8980,1.);+#8980 = DIRECTION('',(0.,1.));+#8981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8982 = ORIENTED_EDGE('',*,*,#8983,.F.);+#8983 = EDGE_CURVE('',#8984,#8956,#8986,.T.);+#8984 = VERTEX_POINT('',#8985);+#8985 = CARTESIAN_POINT('',(3.5,2.925983916503,0.193144044696));+#8986 = SURFACE_CURVE('',#8987,(#8991,#8998),.PCURVE_S1.);+#8987 = LINE('',#8988,#8989);+#8988 = CARTESIAN_POINT('',(3.5,2.925983916503,0.193144044696));+#8989 = VECTOR('',#8990,1.);+#8990 = DIRECTION('',(0.,0.,-1.));+#8991 = PCURVE('',#221,#8992);+#8992 = DEFINITIONAL_REPRESENTATION('',(#8993),#8997);+#8993 = LINE('',#8994,#8995);+#8994 = CARTESIAN_POINT('',(2.925983916503,0.193144044696));+#8995 = VECTOR('',#8996,1.);+#8996 = DIRECTION('',(0.,-1.));+#8997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8998 = PCURVE('',#8999,#9004);+#8999 = PLANE('',#9000);+#9000 = AXIS2_PLACEMENT_3D('',#9001,#9002,#9003);+#9001 = CARTESIAN_POINT('',(3.574258675005,2.925983916503,0.193144044696+ ));+#9002 = DIRECTION('',(0.,-1.,0.));+#9003 = DIRECTION('',(-1.,0.,0.));+#9004 = DEFINITIONAL_REPRESENTATION('',(#9005),#9009);+#9005 = LINE('',#9006,#9007);+#9006 = CARTESIAN_POINT('',(7.4258675005E-02,0.));+#9007 = VECTOR('',#9008,1.);+#9008 = DIRECTION('',(0.,1.));+#9009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9010 = ORIENTED_EDGE('',*,*,#9011,.F.);+#9011 = EDGE_CURVE('',#9012,#8984,#9014,.T.);+#9012 = VERTEX_POINT('',#9013);+#9013 = CARTESIAN_POINT('',(3.5,2.845983916501,0.193144044696));+#9014 = SURFACE_CURVE('',#9015,(#9019,#9026),.PCURVE_S1.);+#9015 = LINE('',#9016,#9017);+#9016 = CARTESIAN_POINT('',(3.5,2.845983916501,0.193144044696));+#9017 = VECTOR('',#9018,1.);+#9018 = DIRECTION('',(0.,1.,0.));+#9019 = PCURVE('',#221,#9020);+#9020 = DEFINITIONAL_REPRESENTATION('',(#9021),#9025);+#9021 = LINE('',#9022,#9023);+#9022 = CARTESIAN_POINT('',(2.845983916501,0.193144044696));+#9023 = VECTOR('',#9024,1.);+#9024 = DIRECTION('',(1.,0.));+#9025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9026 = PCURVE('',#9027,#9032);+#9027 = PLANE('',#9028);+#9028 = AXIS2_PLACEMENT_3D('',#9029,#9030,#9031);+#9029 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+ ));+#9030 = DIRECTION('',(0.,0.,1.));+#9031 = DIRECTION('',(1.,0.,-0.));+#9032 = DEFINITIONAL_REPRESENTATION('',(#9033),#9037);+#9033 = LINE('',#9034,#9035);+#9034 = CARTESIAN_POINT('',(0.710903945544,1.118516806053));+#9035 = VECTOR('',#9036,1.);+#9036 = DIRECTION('',(0.,1.));+#9037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9038 = ORIENTED_EDGE('',*,*,#9039,.T.);+#9039 = EDGE_CURVE('',#9012,#9040,#9042,.T.);+#9040 = VERTEX_POINT('',#9041);+#9041 = CARTESIAN_POINT('',(3.5,2.845983916501,9.314404469578E-02));+#9042 = SURFACE_CURVE('',#9043,(#9047,#9054),.PCURVE_S1.);+#9043 = LINE('',#9044,#9045);+#9044 = CARTESIAN_POINT('',(3.5,2.845983916501,0.193144044696));+#9045 = VECTOR('',#9046,1.);+#9046 = DIRECTION('',(0.,0.,-1.));+#9047 = PCURVE('',#221,#9048);+#9048 = DEFINITIONAL_REPRESENTATION('',(#9049),#9053);+#9049 = LINE('',#9050,#9051);+#9050 = CARTESIAN_POINT('',(2.845983916501,0.193144044696));+#9051 = VECTOR('',#9052,1.);+#9052 = DIRECTION('',(0.,-1.));+#9053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9054 = PCURVE('',#9055,#9060);+#9055 = PLANE('',#9056);+#9056 = AXIS2_PLACEMENT_3D('',#9057,#9058,#9059);+#9057 = CARTESIAN_POINT('',(3.439258674996,2.845983916501,0.193144044696+ ));+#9058 = DIRECTION('',(0.,1.,0.));+#9059 = DIRECTION('',(1.,0.,0.));+#9060 = DEFINITIONAL_REPRESENTATION('',(#9061),#9065);+#9061 = LINE('',#9062,#9063);+#9062 = CARTESIAN_POINT('',(6.0741325004E-02,0.));+#9063 = VECTOR('',#9064,1.);+#9064 = DIRECTION('',(0.,1.));+#9065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9066 = ORIENTED_EDGE('',*,*,#9067,.F.);+#9067 = EDGE_CURVE('',#9068,#9040,#9070,.T.);+#9068 = VERTEX_POINT('',#9069);+#9069 = CARTESIAN_POINT('',(3.5,2.795943709766,9.314404469578E-02));+#9070 = SURFACE_CURVE('',#9071,(#9075,#9082),.PCURVE_S1.);+#9071 = LINE('',#9072,#9073);+#9072 = CARTESIAN_POINT('',(3.5,2.795943709766,9.314404469578E-02));+#9073 = VECTOR('',#9074,1.);+#9074 = DIRECTION('',(0.,1.,0.));+#9075 = PCURVE('',#221,#9076);+#9076 = DEFINITIONAL_REPRESENTATION('',(#9077),#9081);+#9077 = LINE('',#9078,#9079);+#9078 = CARTESIAN_POINT('',(2.795943709766,9.314404469578E-02));+#9079 = VECTOR('',#9080,1.);+#9080 = DIRECTION('',(1.,0.));+#9081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9082 = PCURVE('',#8971,#9083);+#9083 = DEFINITIONAL_REPRESENTATION('',(#9084),#9088);+#9084 = LINE('',#9085,#9086);+#9085 = CARTESIAN_POINT('',(0.418617306392,-8.9748951729E-02));+#9086 = VECTOR('',#9087,1.);+#9087 = DIRECTION('',(0.,1.));+#9088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9089 = ORIENTED_EDGE('',*,*,#9090,.F.);+#9090 = EDGE_CURVE('',#3602,#9068,#9091,.T.);+#9091 = SURFACE_CURVE('',#9092,(#9096,#9103),.PCURVE_S1.);+#9092 = LINE('',#9093,#9094);+#9093 = CARTESIAN_POINT('',(3.5,2.795943709766,0.));+#9094 = VECTOR('',#9095,1.);+#9095 = DIRECTION('',(0.,0.,1.));+#9096 = PCURVE('',#221,#9097);+#9097 = DEFINITIONAL_REPRESENTATION('',(#9098),#9102);+#9098 = LINE('',#9099,#9100);+#9099 = CARTESIAN_POINT('',(2.795943709766,0.));+#9100 = VECTOR('',#9101,1.);+#9101 = DIRECTION('',(0.,1.));+#9102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9103 = PCURVE('',#3640,#9104);+#9104 = DEFINITIONAL_REPRESENTATION('',(#9105),#9109);+#9105 = LINE('',#9106,#9107);+#9106 = CARTESIAN_POINT('',(8.335838225068E-02,-9.314404469578E-02));+#9107 = VECTOR('',#9108,1.);+#9108 = DIRECTION('',(0.,1.));+#9109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9110 = ORIENTED_EDGE('',*,*,#3601,.T.);+#9111 = ORIENTED_EDGE('',*,*,#9112,.T.);+#9112 = EDGE_CURVE('',#3574,#9113,#9115,.T.);+#9113 = VERTEX_POINT('',#9114);+#9114 = CARTESIAN_POINT('',(3.5,2.025441610143,9.314404469578E-02));+#9115 = SURFACE_CURVE('',#9116,(#9120,#9127),.PCURVE_S1.);+#9116 = LINE('',#9117,#9118);+#9117 = CARTESIAN_POINT('',(3.5,2.025441610143,0.));+#9118 = VECTOR('',#9119,1.);+#9119 = DIRECTION('',(-1.430330445603E-14,0.,1.));+#9120 = PCURVE('',#221,#9121);+#9121 = DEFINITIONAL_REPRESENTATION('',(#9122),#9126);+#9122 = LINE('',#9123,#9124);+#9123 = CARTESIAN_POINT('',(2.025441610143,0.));+#9124 = VECTOR('',#9125,1.);+#9125 = DIRECTION('',(0.,1.));+#9126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9127 = PCURVE('',#3589,#9128);+#9128 = DEFINITIONAL_REPRESENTATION('',(#9129),#9133);+#9129 = LINE('',#9130,#9131);+#9130 = CARTESIAN_POINT('',(-5.936554680098E-04,-9.314404469578E-02));+#9131 = VECTOR('',#9132,1.);+#9132 = DIRECTION('',(1.296141334415E-14,1.));+#9133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9134 = ORIENTED_EDGE('',*,*,#9135,.F.);+#9135 = EDGE_CURVE('',#9136,#9113,#9138,.T.);+#9136 = VERTEX_POINT('',#9137);+#9137 = CARTESIAN_POINT('',(3.5,1.975983918052,9.314404469578E-02));+#9138 = SURFACE_CURVE('',#9139,(#9143,#9150),.PCURVE_S1.);+#9139 = LINE('',#9140,#9141);+#9140 = CARTESIAN_POINT('',(3.5,1.975983918052,9.314404469578E-02));+#9141 = VECTOR('',#9142,1.);+#9142 = DIRECTION('',(0.,1.,0.));+#9143 = PCURVE('',#221,#9144);+#9144 = DEFINITIONAL_REPRESENTATION('',(#9145),#9149);+#9145 = LINE('',#9146,#9147);+#9146 = CARTESIAN_POINT('',(1.975983918052,9.314404469578E-02));+#9147 = VECTOR('',#9148,1.);+#9148 = DIRECTION('',(1.,0.));+#9149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9150 = PCURVE('',#8534,#9151);+#9151 = DEFINITIONAL_REPRESENTATION('',(#9152),#9156);+#9152 = LINE('',#9153,#9154);+#9153 = CARTESIAN_POINT('',(0.418617306392,-0.909708743443));+#9154 = VECTOR('',#9155,1.);+#9155 = DIRECTION('',(0.,1.));+#9156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9157 = ORIENTED_EDGE('',*,*,#9158,.F.);+#9158 = EDGE_CURVE('',#9159,#9136,#9161,.T.);+#9159 = VERTEX_POINT('',#9160);+#9160 = CARTESIAN_POINT('',(3.5,1.975983918052,0.193144044696));+#9161 = SURFACE_CURVE('',#9162,(#9166,#9173),.PCURVE_S1.);+#9162 = LINE('',#9163,#9164);+#9163 = CARTESIAN_POINT('',(3.5,1.975983918052,0.193144044696));+#9164 = VECTOR('',#9165,1.);+#9165 = DIRECTION('',(0.,0.,-1.));+#9166 = PCURVE('',#221,#9167);+#9167 = DEFINITIONAL_REPRESENTATION('',(#9168),#9172);+#9168 = LINE('',#9169,#9170);+#9169 = CARTESIAN_POINT('',(1.975983918052,0.193144044696));+#9170 = VECTOR('',#9171,1.);+#9171 = DIRECTION('',(0.,-1.));+#9172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9173 = PCURVE('',#9174,#9179);+#9174 = PLANE('',#9175);+#9175 = AXIS2_PLACEMENT_3D('',#9176,#9177,#9178);+#9176 = CARTESIAN_POINT('',(3.574258671713,1.975983918052,0.193144044696+ ));+#9177 = DIRECTION('',(0.,-1.,0.));+#9178 = DIRECTION('',(-1.,0.,0.));+#9179 = DEFINITIONAL_REPRESENTATION('',(#9180),#9184);+#9180 = LINE('',#9181,#9182);+#9181 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9182 = VECTOR('',#9183,1.);+#9183 = DIRECTION('',(0.,1.));+#9184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9185 = ORIENTED_EDGE('',*,*,#9186,.F.);+#9186 = EDGE_CURVE('',#9187,#9159,#9189,.T.);+#9187 = VERTEX_POINT('',#9188);+#9188 = CARTESIAN_POINT('',(3.5,1.895983918053,0.193144044696));+#9189 = SURFACE_CURVE('',#9190,(#9194,#9201),.PCURVE_S1.);+#9190 = LINE('',#9191,#9192);+#9191 = CARTESIAN_POINT('',(3.5,1.895983918053,0.193144044696));+#9192 = VECTOR('',#9193,1.);+#9193 = DIRECTION('',(0.,1.,0.));+#9194 = PCURVE('',#221,#9195);+#9195 = DEFINITIONAL_REPRESENTATION('',(#9196),#9200);+#9196 = LINE('',#9197,#9198);+#9197 = CARTESIAN_POINT('',(1.895983918053,0.193144044696));+#9198 = VECTOR('',#9199,1.);+#9199 = DIRECTION('',(1.,0.));+#9200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9201 = PCURVE('',#9202,#9207);+#9202 = PLANE('',#9203);+#9203 = AXIS2_PLACEMENT_3D('',#9204,#9205,#9206);+#9204 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+ ));+#9205 = DIRECTION('',(0.,0.,1.));+#9206 = DIRECTION('',(1.,0.,-0.));+#9207 = DEFINITIONAL_REPRESENTATION('',(#9208),#9212);+#9208 = LINE('',#9209,#9210);+#9209 = CARTESIAN_POINT('',(0.710903945544,0.168516807605));+#9210 = VECTOR('',#9211,1.);+#9211 = DIRECTION('',(0.,1.));+#9212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9213 = ORIENTED_EDGE('',*,*,#9214,.T.);+#9214 = EDGE_CURVE('',#9187,#9215,#9217,.T.);+#9215 = VERTEX_POINT('',#9216);+#9216 = CARTESIAN_POINT('',(3.5,1.895983918053,9.314404469578E-02));+#9217 = SURFACE_CURVE('',#9218,(#9222,#9229),.PCURVE_S1.);+#9218 = LINE('',#9219,#9220);+#9219 = CARTESIAN_POINT('',(3.5,1.895983918053,0.193144044696));+#9220 = VECTOR('',#9221,1.);+#9221 = DIRECTION('',(0.,0.,-1.));+#9222 = PCURVE('',#221,#9223);+#9223 = DEFINITIONAL_REPRESENTATION('',(#9224),#9228);+#9224 = LINE('',#9225,#9226);+#9225 = CARTESIAN_POINT('',(1.895983918053,0.193144044696));+#9226 = VECTOR('',#9227,1.);+#9227 = DIRECTION('',(0.,-1.));+#9228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9229 = PCURVE('',#9230,#9235);+#9230 = PLANE('',#9231);+#9231 = AXIS2_PLACEMENT_3D('',#9232,#9233,#9234);+#9232 = CARTESIAN_POINT('',(3.439258671704,1.895983918053,0.193144044696+ ));+#9233 = DIRECTION('',(0.,1.,0.));+#9234 = DIRECTION('',(1.,0.,0.));+#9235 = DEFINITIONAL_REPRESENTATION('',(#9236),#9240);+#9236 = LINE('',#9237,#9238);+#9237 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9238 = VECTOR('',#9239,1.);+#9239 = DIRECTION('',(0.,1.));+#9240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9241 = ORIENTED_EDGE('',*,*,#9242,.F.);+#9242 = EDGE_CURVE('',#9243,#9215,#9245,.T.);+#9243 = VERTEX_POINT('',#9244);+#9244 = CARTESIAN_POINT('',(3.5,1.845943709768,9.314404469578E-02));+#9245 = SURFACE_CURVE('',#9246,(#9250,#9257),.PCURVE_S1.);+#9246 = LINE('',#9247,#9248);+#9247 = CARTESIAN_POINT('',(3.5,1.845943709768,9.314404469578E-02));+#9248 = VECTOR('',#9249,1.);+#9249 = DIRECTION('',(0.,1.,0.));+#9250 = PCURVE('',#221,#9251);+#9251 = DEFINITIONAL_REPRESENTATION('',(#9252),#9256);+#9252 = LINE('',#9253,#9254);+#9253 = CARTESIAN_POINT('',(1.845943709768,9.314404469578E-02));+#9254 = VECTOR('',#9255,1.);+#9255 = DIRECTION('',(1.,0.));+#9256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9257 = PCURVE('',#8534,#9258);+#9258 = DEFINITIONAL_REPRESENTATION('',(#9259),#9263);+#9259 = LINE('',#9260,#9261);+#9260 = CARTESIAN_POINT('',(0.418617306392,-1.039748951727));+#9261 = VECTOR('',#9262,1.);+#9262 = DIRECTION('',(0.,1.));+#9263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9264 = ORIENTED_EDGE('',*,*,#9265,.F.);+#9265 = EDGE_CURVE('',#3717,#9243,#9266,.T.);+#9266 = SURFACE_CURVE('',#9267,(#9271,#9278),.PCURVE_S1.);+#9267 = LINE('',#9268,#9269);+#9268 = CARTESIAN_POINT('',(3.5,1.845943709768,0.));+#9269 = VECTOR('',#9270,1.);+#9270 = DIRECTION('',(0.,0.,1.));+#9271 = PCURVE('',#221,#9272);+#9272 = DEFINITIONAL_REPRESENTATION('',(#9273),#9277);+#9273 = LINE('',#9274,#9275);+#9274 = CARTESIAN_POINT('',(1.845943709768,0.));+#9275 = VECTOR('',#9276,1.);+#9276 = DIRECTION('',(0.,1.));+#9277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9278 = PCURVE('',#3755,#9279);+#9279 = DEFINITIONAL_REPRESENTATION('',(#9280),#9284);+#9280 = LINE('',#9281,#9282);+#9281 = CARTESIAN_POINT('',(-5.936554680101E-04,9.314404469578E-02));+#9282 = VECTOR('',#9283,1.);+#9283 = DIRECTION('',(0.,-1.));+#9284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9285 = ORIENTED_EDGE('',*,*,#3716,.T.);+#9286 = ORIENTED_EDGE('',*,*,#9287,.T.);+#9287 = EDGE_CURVE('',#3684,#9288,#9290,.T.);+#9288 = VERTEX_POINT('',#9289);+#9289 = CARTESIAN_POINT('',(3.5,1.52544161323,9.314404469578E-02));+#9290 = SURFACE_CURVE('',#9291,(#9295,#9302),.PCURVE_S1.);+#9291 = LINE('',#9292,#9293);+#9292 = CARTESIAN_POINT('',(3.5,1.52544161323,0.));+#9293 = VECTOR('',#9294,1.);+#9294 = DIRECTION('',(0.,0.,1.));+#9295 = PCURVE('',#221,#9296);+#9296 = DEFINITIONAL_REPRESENTATION('',(#9297),#9301);+#9297 = LINE('',#9298,#9299);+#9298 = CARTESIAN_POINT('',(1.52544161323,0.));+#9299 = VECTOR('',#9300,1.);+#9300 = DIRECTION('',(0.,1.));+#9301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9302 = PCURVE('',#3704,#9303);+#9303 = DEFINITIONAL_REPRESENTATION('',(#9304),#9308);+#9304 = LINE('',#9305,#9306);+#9305 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#9306 = VECTOR('',#9307,1.);+#9307 = DIRECTION('',(0.,-1.));+#9308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9309 = ORIENTED_EDGE('',*,*,#9310,.F.);+#9310 = EDGE_CURVE('',#9311,#9288,#9313,.T.);+#9311 = VERTEX_POINT('',#9312);+#9312 = CARTESIAN_POINT('',(3.5,1.47598391805,9.314404469578E-02));+#9313 = SURFACE_CURVE('',#9314,(#9318,#9325),.PCURVE_S1.);+#9314 = LINE('',#9315,#9316);+#9315 = CARTESIAN_POINT('',(3.5,1.47598391805,9.314404469578E-02));+#9316 = VECTOR('',#9317,1.);+#9317 = DIRECTION('',(0.,1.,0.));+#9318 = PCURVE('',#221,#9319);+#9319 = DEFINITIONAL_REPRESENTATION('',(#9320),#9324);+#9320 = LINE('',#9321,#9322);+#9321 = CARTESIAN_POINT('',(1.47598391805,9.314404469578E-02));+#9322 = VECTOR('',#9323,1.);+#9323 = DIRECTION('',(1.,0.));+#9324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9325 = PCURVE('',#8534,#9326);+#9326 = DEFINITIONAL_REPRESENTATION('',(#9327),#9331);+#9327 = LINE('',#9328,#9329);+#9328 = CARTESIAN_POINT('',(0.418617306392,-1.409708743445));+#9329 = VECTOR('',#9330,1.);+#9330 = DIRECTION('',(0.,1.));+#9331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9332 = ORIENTED_EDGE('',*,*,#9333,.F.);+#9333 = EDGE_CURVE('',#9334,#9311,#9336,.T.);+#9334 = VERTEX_POINT('',#9335);+#9335 = CARTESIAN_POINT('',(3.5,1.47598391805,0.193144044696));+#9336 = SURFACE_CURVE('',#9337,(#9341,#9348),.PCURVE_S1.);+#9337 = LINE('',#9338,#9339);+#9338 = CARTESIAN_POINT('',(3.5,1.47598391805,0.193144044696));+#9339 = VECTOR('',#9340,1.);+#9340 = DIRECTION('',(0.,0.,-1.));+#9341 = PCURVE('',#221,#9342);+#9342 = DEFINITIONAL_REPRESENTATION('',(#9343),#9347);+#9343 = LINE('',#9344,#9345);+#9344 = CARTESIAN_POINT('',(1.47598391805,0.193144044696));+#9345 = VECTOR('',#9346,1.);+#9346 = DIRECTION('',(0.,-1.));+#9347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9348 = PCURVE('',#9349,#9354);+#9349 = PLANE('',#9350);+#9350 = AXIS2_PLACEMENT_3D('',#9351,#9352,#9353);+#9351 = CARTESIAN_POINT('',(3.574258671713,1.47598391805,0.193144044696)+ );+#9352 = DIRECTION('',(0.,-1.,0.));+#9353 = DIRECTION('',(-1.,0.,0.));+#9354 = DEFINITIONAL_REPRESENTATION('',(#9355),#9359);+#9355 = LINE('',#9356,#9357);+#9356 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9357 = VECTOR('',#9358,1.);+#9358 = DIRECTION('',(0.,1.));+#9359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9360 = ORIENTED_EDGE('',*,*,#9361,.F.);+#9361 = EDGE_CURVE('',#9362,#9334,#9364,.T.);+#9362 = VERTEX_POINT('',#9363);+#9363 = CARTESIAN_POINT('',(3.5,1.395983918052,0.193144044696));+#9364 = SURFACE_CURVE('',#9365,(#9369,#9376),.PCURVE_S1.);+#9365 = LINE('',#9366,#9367);+#9366 = CARTESIAN_POINT('',(3.5,1.395983918052,0.193144044696));+#9367 = VECTOR('',#9368,1.);+#9368 = DIRECTION('',(-1.110223024651E-14,1.,0.));+#9369 = PCURVE('',#221,#9370);+#9370 = DEFINITIONAL_REPRESENTATION('',(#9371),#9375);+#9371 = LINE('',#9372,#9373);+#9372 = CARTESIAN_POINT('',(1.395983918052,0.193144044696));+#9373 = VECTOR('',#9374,1.);+#9374 = DIRECTION('',(1.,0.));+#9375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9376 = PCURVE('',#9377,#9382);+#9377 = PLANE('',#9378);+#9378 = AXIS2_PLACEMENT_3D('',#9379,#9380,#9381);+#9379 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+ ));+#9380 = DIRECTION('',(0.,0.,1.));+#9381 = DIRECTION('',(1.,0.,-0.));+#9382 = DEFINITIONAL_REPRESENTATION('',(#9383),#9387);+#9383 = LINE('',#9384,#9385);+#9384 = CARTESIAN_POINT('',(0.710903945544,-0.331483192396));+#9385 = VECTOR('',#9386,1.);+#9386 = DIRECTION('',(-1.110223024651E-14,1.));+#9387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9388 = ORIENTED_EDGE('',*,*,#9389,.T.);+#9389 = EDGE_CURVE('',#9362,#9390,#9392,.T.);+#9390 = VERTEX_POINT('',#9391);+#9391 = CARTESIAN_POINT('',(3.5,1.395983918052,9.314404469578E-02));+#9392 = SURFACE_CURVE('',#9393,(#9397,#9404),.PCURVE_S1.);+#9393 = LINE('',#9394,#9395);+#9394 = CARTESIAN_POINT('',(3.5,1.395983918052,0.193144044696));+#9395 = VECTOR('',#9396,1.);+#9396 = DIRECTION('',(0.,0.,-1.));+#9397 = PCURVE('',#221,#9398);+#9398 = DEFINITIONAL_REPRESENTATION('',(#9399),#9403);+#9399 = LINE('',#9400,#9401);+#9400 = CARTESIAN_POINT('',(1.395983918052,0.193144044696));+#9401 = VECTOR('',#9402,1.);+#9402 = DIRECTION('',(0.,-1.));+#9403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9404 = PCURVE('',#9405,#9410);+#9405 = PLANE('',#9406);+#9406 = AXIS2_PLACEMENT_3D('',#9407,#9408,#9409);+#9407 = CARTESIAN_POINT('',(3.439258671704,1.395983918052,0.193144044696+ ));+#9408 = DIRECTION('',(0.,1.,0.));+#9409 = DIRECTION('',(1.,0.,0.));+#9410 = DEFINITIONAL_REPRESENTATION('',(#9411),#9415);+#9411 = LINE('',#9412,#9413);+#9412 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9413 = VECTOR('',#9414,1.);+#9414 = DIRECTION('',(0.,1.));+#9415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9416 = ORIENTED_EDGE('',*,*,#9417,.F.);+#9417 = EDGE_CURVE('',#9418,#9390,#9420,.T.);+#9418 = VERTEX_POINT('',#9419);+#9419 = CARTESIAN_POINT('',(3.5,1.345943709768,9.314404469578E-02));+#9420 = SURFACE_CURVE('',#9421,(#9425,#9432),.PCURVE_S1.);+#9421 = LINE('',#9422,#9423);+#9422 = CARTESIAN_POINT('',(3.5,1.345943709768,9.314404469578E-02));+#9423 = VECTOR('',#9424,1.);+#9424 = DIRECTION('',(0.,1.,0.));+#9425 = PCURVE('',#221,#9426);+#9426 = DEFINITIONAL_REPRESENTATION('',(#9427),#9431);+#9427 = LINE('',#9428,#9429);+#9428 = CARTESIAN_POINT('',(1.345943709768,9.314404469578E-02));+#9429 = VECTOR('',#9430,1.);+#9430 = DIRECTION('',(1.,0.));+#9431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9432 = PCURVE('',#8534,#9433);+#9433 = DEFINITIONAL_REPRESENTATION('',(#9434),#9438);+#9434 = LINE('',#9435,#9436);+#9435 = CARTESIAN_POINT('',(0.418617306392,-1.539748951727));+#9436 = VECTOR('',#9437,1.);+#9437 = DIRECTION('',(0.,1.));+#9438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9439 = ORIENTED_EDGE('',*,*,#9440,.F.);+#9440 = EDGE_CURVE('',#4059,#9418,#9441,.T.);+#9441 = SURFACE_CURVE('',#9442,(#9446,#9453),.PCURVE_S1.);+#9442 = LINE('',#9443,#9444);+#9443 = CARTESIAN_POINT('',(3.5,1.345943709768,0.));+#9444 = VECTOR('',#9445,1.);+#9445 = DIRECTION('',(0.,0.,1.));+#9446 = PCURVE('',#221,#9447);+#9447 = DEFINITIONAL_REPRESENTATION('',(#9448),#9452);+#9448 = LINE('',#9449,#9450);+#9449 = CARTESIAN_POINT('',(1.345943709768,0.));+#9450 = VECTOR('',#9451,1.);+#9451 = DIRECTION('',(0.,1.));+#9452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9453 = PCURVE('',#4097,#9454);+#9454 = DEFINITIONAL_REPRESENTATION('',(#9455),#9459);+#9455 = LINE('',#9456,#9457);+#9456 = CARTESIAN_POINT('',(-5.936554680101E-04,9.314404469578E-02));+#9457 = VECTOR('',#9458,1.);+#9458 = DIRECTION('',(0.,-1.));+#9459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9460 = ORIENTED_EDGE('',*,*,#4058,.T.);+#9461 = ORIENTED_EDGE('',*,*,#9462,.T.);+#9462 = EDGE_CURVE('',#4026,#9463,#9465,.T.);+#9463 = VERTEX_POINT('',#9464);+#9464 = CARTESIAN_POINT('',(3.5,1.02544161323,9.314404469578E-02));+#9465 = SURFACE_CURVE('',#9466,(#9470,#9477),.PCURVE_S1.);+#9466 = LINE('',#9467,#9468);+#9467 = CARTESIAN_POINT('',(3.5,1.02544161323,0.));+#9468 = VECTOR('',#9469,1.);+#9469 = DIRECTION('',(0.,0.,1.));+#9470 = PCURVE('',#221,#9471);+#9471 = DEFINITIONAL_REPRESENTATION('',(#9472),#9476);+#9472 = LINE('',#9473,#9474);+#9473 = CARTESIAN_POINT('',(1.02544161323,0.));+#9474 = VECTOR('',#9475,1.);+#9475 = DIRECTION('',(0.,1.));+#9476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9477 = PCURVE('',#4046,#9478);+#9478 = DEFINITIONAL_REPRESENTATION('',(#9479),#9483);+#9479 = LINE('',#9480,#9481);+#9480 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#9481 = VECTOR('',#9482,1.);+#9482 = DIRECTION('',(0.,-1.));+#9483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9484 = ORIENTED_EDGE('',*,*,#9485,.F.);+#9485 = EDGE_CURVE('',#9486,#9463,#9488,.T.);+#9486 = VERTEX_POINT('',#9487);+#9487 = CARTESIAN_POINT('',(3.5,0.975983918052,9.314404469578E-02));+#9488 = SURFACE_CURVE('',#9489,(#9493,#9500),.PCURVE_S1.);+#9489 = LINE('',#9490,#9491);+#9490 = CARTESIAN_POINT('',(3.5,0.975983918052,9.314404469578E-02));+#9491 = VECTOR('',#9492,1.);+#9492 = DIRECTION('',(0.,1.,0.));+#9493 = PCURVE('',#221,#9494);+#9494 = DEFINITIONAL_REPRESENTATION('',(#9495),#9499);+#9495 = LINE('',#9496,#9497);+#9496 = CARTESIAN_POINT('',(0.975983918052,9.314404469578E-02));+#9497 = VECTOR('',#9498,1.);+#9498 = DIRECTION('',(1.,0.));+#9499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9500 = PCURVE('',#8534,#9501);+#9501 = DEFINITIONAL_REPRESENTATION('',(#9502),#9506);+#9502 = LINE('',#9503,#9504);+#9503 = CARTESIAN_POINT('',(0.418617306392,-1.909708743443));+#9504 = VECTOR('',#9505,1.);+#9505 = DIRECTION('',(0.,1.));+#9506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9507 = ORIENTED_EDGE('',*,*,#9508,.F.);+#9508 = EDGE_CURVE('',#9509,#9486,#9511,.T.);+#9509 = VERTEX_POINT('',#9510);+#9510 = CARTESIAN_POINT('',(3.5,0.975983918052,0.193144044696));+#9511 = SURFACE_CURVE('',#9512,(#9516,#9523),.PCURVE_S1.);+#9512 = LINE('',#9513,#9514);+#9513 = CARTESIAN_POINT('',(3.5,0.975983918052,0.193144044696));+#9514 = VECTOR('',#9515,1.);+#9515 = DIRECTION('',(0.,0.,-1.));+#9516 = PCURVE('',#221,#9517);+#9517 = DEFINITIONAL_REPRESENTATION('',(#9518),#9522);+#9518 = LINE('',#9519,#9520);+#9519 = CARTESIAN_POINT('',(0.975983918052,0.193144044696));+#9520 = VECTOR('',#9521,1.);+#9521 = DIRECTION('',(0.,-1.));+#9522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9523 = PCURVE('',#9524,#9529);+#9524 = PLANE('',#9525);+#9525 = AXIS2_PLACEMENT_3D('',#9526,#9527,#9528);+#9526 = CARTESIAN_POINT('',(3.574258671713,0.975983918052,0.193144044696+ ));+#9527 = DIRECTION('',(0.,-1.,0.));+#9528 = DIRECTION('',(-1.,0.,0.));+#9529 = DEFINITIONAL_REPRESENTATION('',(#9530),#9534);+#9530 = LINE('',#9531,#9532);+#9531 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9532 = VECTOR('',#9533,1.);+#9533 = DIRECTION('',(0.,1.));+#9534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9535 = ORIENTED_EDGE('',*,*,#9536,.F.);+#9536 = EDGE_CURVE('',#9537,#9509,#9539,.T.);+#9537 = VERTEX_POINT('',#9538);+#9538 = CARTESIAN_POINT('',(3.5,0.89598391805,0.193144044696));+#9539 = SURFACE_CURVE('',#9540,(#9544,#9551),.PCURVE_S1.);+#9540 = LINE('',#9541,#9542);+#9541 = CARTESIAN_POINT('',(3.5,0.89598391805,0.193144044696));+#9542 = VECTOR('',#9543,1.);+#9543 = DIRECTION('',(1.110223024588E-14,1.,0.));+#9544 = PCURVE('',#221,#9545);+#9545 = DEFINITIONAL_REPRESENTATION('',(#9546),#9550);+#9546 = LINE('',#9547,#9548);+#9547 = CARTESIAN_POINT('',(0.89598391805,0.193144044696));+#9548 = VECTOR('',#9549,1.);+#9549 = DIRECTION('',(1.,0.));+#9550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9551 = PCURVE('',#9552,#9557);+#9552 = PLANE('',#9553);+#9553 = AXIS2_PLACEMENT_3D('',#9554,#9555,#9556);+#9554 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+ ));+#9555 = DIRECTION('',(0.,0.,1.));+#9556 = DIRECTION('',(1.,0.,-0.));+#9557 = DEFINITIONAL_REPRESENTATION('',(#9558),#9562);+#9558 = LINE('',#9559,#9560);+#9559 = CARTESIAN_POINT('',(0.710903945544,-0.831483192398));+#9560 = VECTOR('',#9561,1.);+#9561 = DIRECTION('',(1.110223024588E-14,1.));+#9562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9563 = ORIENTED_EDGE('',*,*,#9564,.T.);+#9564 = EDGE_CURVE('',#9537,#9565,#9567,.T.);+#9565 = VERTEX_POINT('',#9566);+#9566 = CARTESIAN_POINT('',(3.5,0.89598391805,9.314404469578E-02));+#9567 = SURFACE_CURVE('',#9568,(#9572,#9579),.PCURVE_S1.);+#9568 = LINE('',#9569,#9570);+#9569 = CARTESIAN_POINT('',(3.5,0.89598391805,0.193144044696));+#9570 = VECTOR('',#9571,1.);+#9571 = DIRECTION('',(0.,0.,-1.));+#9572 = PCURVE('',#221,#9573);+#9573 = DEFINITIONAL_REPRESENTATION('',(#9574),#9578);+#9574 = LINE('',#9575,#9576);+#9575 = CARTESIAN_POINT('',(0.89598391805,0.193144044696));+#9576 = VECTOR('',#9577,1.);+#9577 = DIRECTION('',(0.,-1.));+#9578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9579 = PCURVE('',#9580,#9585);+#9580 = PLANE('',#9581);+#9581 = AXIS2_PLACEMENT_3D('',#9582,#9583,#9584);+#9582 = CARTESIAN_POINT('',(3.439258671704,0.89598391805,0.193144044696)+ );+#9583 = DIRECTION('',(0.,1.,0.));+#9584 = DIRECTION('',(1.,0.,0.));+#9585 = DEFINITIONAL_REPRESENTATION('',(#9586),#9590);+#9586 = LINE('',#9587,#9588);+#9587 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9588 = VECTOR('',#9589,1.);+#9589 = DIRECTION('',(0.,1.));+#9590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9591 = ORIENTED_EDGE('',*,*,#9592,.F.);+#9592 = EDGE_CURVE('',#9593,#9565,#9595,.T.);+#9593 = VERTEX_POINT('',#9594);+#9594 = CARTESIAN_POINT('',(3.5,0.845943709767,9.314404469578E-02));+#9595 = SURFACE_CURVE('',#9596,(#9600,#9607),.PCURVE_S1.);+#9596 = LINE('',#9597,#9598);+#9597 = CARTESIAN_POINT('',(3.5,0.845943709767,9.314404469578E-02));+#9598 = VECTOR('',#9599,1.);+#9599 = DIRECTION('',(0.,1.,0.));+#9600 = PCURVE('',#221,#9601);+#9601 = DEFINITIONAL_REPRESENTATION('',(#9602),#9606);+#9602 = LINE('',#9603,#9604);+#9603 = CARTESIAN_POINT('',(0.845943709767,9.314404469578E-02));+#9604 = VECTOR('',#9605,1.);+#9605 = DIRECTION('',(1.,0.));+#9606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9607 = PCURVE('',#8534,#9608);+#9608 = DEFINITIONAL_REPRESENTATION('',(#9609),#9613);+#9609 = LINE('',#9610,#9611);+#9610 = CARTESIAN_POINT('',(0.418617306392,-2.039748951728));+#9611 = VECTOR('',#9612,1.);+#9612 = DIRECTION('',(0.,1.));+#9613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9614 = ORIENTED_EDGE('',*,*,#9615,.F.);+#9615 = EDGE_CURVE('',#3888,#9593,#9616,.T.);+#9616 = SURFACE_CURVE('',#9617,(#9621,#9628),.PCURVE_S1.);+#9617 = LINE('',#9618,#9619);+#9618 = CARTESIAN_POINT('',(3.5,0.845943709767,0.));+#9619 = VECTOR('',#9620,1.);+#9620 = DIRECTION('',(0.,0.,1.));+#9621 = PCURVE('',#221,#9622);+#9622 = DEFINITIONAL_REPRESENTATION('',(#9623),#9627);+#9623 = LINE('',#9624,#9625);+#9624 = CARTESIAN_POINT('',(0.845943709767,0.));+#9625 = VECTOR('',#9626,1.);+#9626 = DIRECTION('',(0.,1.));+#9627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9628 = PCURVE('',#3926,#9629);+#9629 = DEFINITIONAL_REPRESENTATION('',(#9630),#9634);+#9630 = LINE('',#9631,#9632);+#9631 = CARTESIAN_POINT('',(-5.936554675872E-04,9.314404469578E-02));+#9632 = VECTOR('',#9633,1.);+#9633 = DIRECTION('',(0.,-1.));+#9634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9635 = ORIENTED_EDGE('',*,*,#3887,.T.);+#9636 = ORIENTED_EDGE('',*,*,#9637,.T.);+#9637 = EDGE_CURVE('',#3855,#9638,#9640,.T.);+#9638 = VERTEX_POINT('',#9639);+#9639 = CARTESIAN_POINT('',(3.5,0.52544161323,9.314404469578E-02));+#9640 = SURFACE_CURVE('',#9641,(#9645,#9652),.PCURVE_S1.);+#9641 = LINE('',#9642,#9643);+#9642 = CARTESIAN_POINT('',(3.5,0.52544161323,0.));+#9643 = VECTOR('',#9644,1.);+#9644 = DIRECTION('',(0.,0.,1.));+#9645 = PCURVE('',#221,#9646);+#9646 = DEFINITIONAL_REPRESENTATION('',(#9647),#9651);+#9647 = LINE('',#9648,#9649);+#9648 = CARTESIAN_POINT('',(0.52544161323,0.));+#9649 = VECTOR('',#9650,1.);+#9650 = DIRECTION('',(0.,1.));+#9651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9652 = PCURVE('',#3875,#9653);+#9653 = DEFINITIONAL_REPRESENTATION('',(#9654),#9658);+#9654 = LINE('',#9655,#9656);+#9655 = CARTESIAN_POINT('',(8.335838225153E-02,9.314404469578E-02));+#9656 = VECTOR('',#9657,1.);+#9657 = DIRECTION('',(0.,-1.));+#9658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9659 = ORIENTED_EDGE('',*,*,#9660,.F.);+#9660 = EDGE_CURVE('',#9661,#9638,#9663,.T.);+#9661 = VERTEX_POINT('',#9662);+#9662 = CARTESIAN_POINT('',(3.5,0.475983918055,9.314404469578E-02));+#9663 = SURFACE_CURVE('',#9664,(#9668,#9675),.PCURVE_S1.);+#9664 = LINE('',#9665,#9666);+#9665 = CARTESIAN_POINT('',(3.5,0.475983918055,9.314404469578E-02));+#9666 = VECTOR('',#9667,1.);+#9667 = DIRECTION('',(0.,1.,0.));+#9668 = PCURVE('',#221,#9669);+#9669 = DEFINITIONAL_REPRESENTATION('',(#9670),#9674);+#9670 = LINE('',#9671,#9672);+#9671 = CARTESIAN_POINT('',(0.475983918055,9.314404469578E-02));+#9672 = VECTOR('',#9673,1.);+#9673 = DIRECTION('',(1.,0.));+#9674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9675 = PCURVE('',#8534,#9676);+#9676 = DEFINITIONAL_REPRESENTATION('',(#9677),#9681);+#9677 = LINE('',#9678,#9679);+#9678 = CARTESIAN_POINT('',(0.418617306392,-2.40970874344));+#9679 = VECTOR('',#9680,1.);+#9680 = DIRECTION('',(0.,1.));+#9681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9682 = ORIENTED_EDGE('',*,*,#9683,.F.);+#9683 = EDGE_CURVE('',#9684,#9661,#9686,.T.);+#9684 = VERTEX_POINT('',#9685);+#9685 = CARTESIAN_POINT('',(3.5,0.475983918055,0.193144044696));+#9686 = SURFACE_CURVE('',#9687,(#9691,#9698),.PCURVE_S1.);+#9687 = LINE('',#9688,#9689);+#9688 = CARTESIAN_POINT('',(3.5,0.475983918055,0.193144044696));+#9689 = VECTOR('',#9690,1.);+#9690 = DIRECTION('',(0.,0.,-1.));+#9691 = PCURVE('',#221,#9692);+#9692 = DEFINITIONAL_REPRESENTATION('',(#9693),#9697);+#9693 = LINE('',#9694,#9695);+#9694 = CARTESIAN_POINT('',(0.475983918055,0.193144044696));+#9695 = VECTOR('',#9696,1.);+#9696 = DIRECTION('',(0.,-1.));+#9697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9698 = PCURVE('',#9699,#9704);+#9699 = PLANE('',#9700);+#9700 = AXIS2_PLACEMENT_3D('',#9701,#9702,#9703);+#9701 = CARTESIAN_POINT('',(3.574258671713,0.475983918055,0.193144044696+ ));+#9702 = DIRECTION('',(0.,-1.,0.));+#9703 = DIRECTION('',(-1.,0.,0.));+#9704 = DEFINITIONAL_REPRESENTATION('',(#9705),#9709);+#9705 = LINE('',#9706,#9707);+#9706 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#9707 = VECTOR('',#9708,1.);+#9708 = DIRECTION('',(0.,1.));+#9709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9710 = ORIENTED_EDGE('',*,*,#9711,.F.);+#9711 = EDGE_CURVE('',#9712,#9684,#9714,.T.);+#9712 = VERTEX_POINT('',#9713);+#9713 = CARTESIAN_POINT('',(3.5,0.395983918053,0.193144044696));+#9714 = SURFACE_CURVE('',#9715,(#9719,#9726),.PCURVE_S1.);+#9715 = LINE('',#9716,#9717);+#9716 = CARTESIAN_POINT('',(3.5,0.395983918053,0.193144044696));+#9717 = VECTOR('',#9718,1.);+#9718 = DIRECTION('',(0.,1.,0.));+#9719 = PCURVE('',#221,#9720);+#9720 = DEFINITIONAL_REPRESENTATION('',(#9721),#9725);+#9721 = LINE('',#9722,#9723);+#9722 = CARTESIAN_POINT('',(0.395983918053,0.193144044696));+#9723 = VECTOR('',#9724,1.);+#9724 = DIRECTION('',(1.,0.));+#9725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9726 = PCURVE('',#9727,#9732);+#9727 = PLANE('',#9728);+#9728 = AXIS2_PLACEMENT_3D('',#9729,#9730,#9731);+#9729 = CARTESIAN_POINT('',(2.789096054456,1.727467110448,0.193144044696+ ));+#9730 = DIRECTION('',(0.,0.,1.));+#9731 = DIRECTION('',(1.,0.,-0.));+#9732 = DEFINITIONAL_REPRESENTATION('',(#9733),#9737);+#9733 = LINE('',#9734,#9735);+#9734 = CARTESIAN_POINT('',(0.710903945544,-1.331483192395));+#9735 = VECTOR('',#9736,1.);+#9736 = DIRECTION('',(0.,1.));+#9737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9738 = ORIENTED_EDGE('',*,*,#9739,.T.);+#9739 = EDGE_CURVE('',#9712,#8519,#9740,.T.);+#9740 = SURFACE_CURVE('',#9741,(#9745,#9752),.PCURVE_S1.);+#9741 = LINE('',#9742,#9743);+#9742 = CARTESIAN_POINT('',(3.5,0.395983918053,0.193144044696));+#9743 = VECTOR('',#9744,1.);+#9744 = DIRECTION('',(0.,0.,-1.));+#9745 = PCURVE('',#221,#9746);+#9746 = DEFINITIONAL_REPRESENTATION('',(#9747),#9751);+#9747 = LINE('',#9748,#9749);+#9748 = CARTESIAN_POINT('',(0.395983918053,0.193144044696));+#9749 = VECTOR('',#9750,1.);+#9750 = DIRECTION('',(0.,-1.));+#9751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9752 = PCURVE('',#9753,#9758);+#9753 = PLANE('',#9754);+#9754 = AXIS2_PLACEMENT_3D('',#9755,#9756,#9757);+#9755 = CARTESIAN_POINT('',(3.439258671704,0.395983918053,0.193144044696+ ));+#9756 = DIRECTION('',(0.,1.,0.));+#9757 = DIRECTION('',(1.,0.,0.));+#9758 = DEFINITIONAL_REPRESENTATION('',(#9759),#9763);+#9759 = LINE('',#9760,#9761);+#9760 = CARTESIAN_POINT('',(6.0741328296E-02,0.));+#9761 = VECTOR('',#9762,1.);+#9762 = DIRECTION('',(0.,1.));+#9763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9764 = ADVANCED_FACE('',(#9765),#8534,.F.);+#9765 = FACE_BOUND('',#9766,.F.);+#9766 = EDGE_LOOP('',(#9767,#9768,#9791,#9819,#9840,#9841,#9864,#9887,+ #9910,#9933,#9954,#9955,#9978,#10006,#10027,#10028,#10051,#10074,+ #10097,#10120,#10141,#10142,#10165,#10193,#10214,#10215,#10238,+ #10261,#10284,#10307,#10328,#10329,#10352,#10380,#10401,#10402,+ #10425,#10448,#10471,#10494,#10522,#10545,#10573,#10596,#10619,+ #10642));+#9767 = ORIENTED_EDGE('',*,*,#8516,.T.);+#9768 = ORIENTED_EDGE('',*,*,#9769,.T.);+#9769 = EDGE_CURVE('',#8519,#9770,#9772,.T.);+#9770 = VERTEX_POINT('',#9771);+#9771 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+ 9.314404469578E-02));+#9772 = SURFACE_CURVE('',#9773,(#9777,#9784),.PCURVE_S1.);+#9773 = LINE('',#9774,#9775);+#9774 = CARTESIAN_POINT('',(3.5,0.395983918053,9.314404469578E-02));+#9775 = VECTOR('',#9776,1.);+#9776 = DIRECTION('',(-1.,0.,0.));+#9777 = PCURVE('',#8534,#9778);+#9778 = DEFINITIONAL_REPRESENTATION('',(#9779),#9783);+#9779 = LINE('',#9780,#9781);+#9780 = CARTESIAN_POINT('',(0.418617306392,-2.489708743442));+#9781 = VECTOR('',#9782,1.);+#9782 = DIRECTION('',(-1.,0.));+#9783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9784 = PCURVE('',#9753,#9785);+#9785 = DEFINITIONAL_REPRESENTATION('',(#9786),#9790);+#9786 = LINE('',#9787,#9788);+#9787 = CARTESIAN_POINT('',(6.0741328296E-02,0.1));+#9788 = VECTOR('',#9789,1.);+#9789 = DIRECTION('',(-1.,0.));+#9790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9791 = ORIENTED_EDGE('',*,*,#9792,.T.);+#9792 = EDGE_CURVE('',#9770,#9793,#9795,.T.);+#9793 = VERTEX_POINT('',#9794);+#9794 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+ 9.314404469578E-02));+#9795 = SURFACE_CURVE('',#9796,(#9800,#9807),.PCURVE_S1.);+#9796 = LINE('',#9797,#9798);+#9797 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+ 9.314404469578E-02));+#9798 = VECTOR('',#9799,1.);+#9799 = DIRECTION('',(0.,1.,0.));+#9800 = PCURVE('',#8534,#9801);+#9801 = DEFINITIONAL_REPRESENTATION('',(#9802),#9806);+#9802 = LINE('',#9803,#9804);+#9803 = CARTESIAN_POINT('',(0.368584098237,-2.489708743442));+#9804 = VECTOR('',#9805,1.);+#9805 = DIRECTION('',(0.,1.));+#9806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9807 = PCURVE('',#9808,#9813);+#9808 = PLANE('',#9809);+#9809 = AXIS2_PLACEMENT_3D('',#9810,#9811,#9812);+#9810 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,0.193144044696+ ));+#9811 = DIRECTION('',(1.,0.,0.));+#9812 = DIRECTION('',(-0.,1.,0.));+#9813 = DEFINITIONAL_REPRESENTATION('',(#9814),#9818);+#9814 = LINE('',#9815,#9816);+#9815 = CARTESIAN_POINT('',(0.247592270345,-0.1));+#9816 = VECTOR('',#9817,1.);+#9817 = DIRECTION('',(1.,0.));+#9818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9819 = ORIENTED_EDGE('',*,*,#9820,.T.);+#9820 = EDGE_CURVE('',#9793,#9661,#9821,.T.);+#9821 = SURFACE_CURVE('',#9822,(#9826,#9833),.PCURVE_S1.);+#9822 = LINE('',#9823,#9824);+#9823 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+ 9.314404469578E-02));+#9824 = VECTOR('',#9825,1.);+#9825 = DIRECTION('',(1.,0.,0.));+#9826 = PCURVE('',#8534,#9827);+#9827 = DEFINITIONAL_REPRESENTATION('',(#9828),#9832);+#9828 = LINE('',#9829,#9830);+#9829 = CARTESIAN_POINT('',(0.368584098237,-2.40970874344));+#9830 = VECTOR('',#9831,1.);+#9831 = DIRECTION('',(1.,0.));+#9832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9833 = PCURVE('',#9699,#9834);+#9834 = DEFINITIONAL_REPRESENTATION('',(#9835),#9839);+#9835 = LINE('',#9836,#9837);+#9836 = CARTESIAN_POINT('',(0.124291879868,0.1));+#9837 = VECTOR('',#9838,1.);+#9838 = DIRECTION('',(-1.,-0.));+#9839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9840 = ORIENTED_EDGE('',*,*,#9660,.T.);+#9841 = ORIENTED_EDGE('',*,*,#9842,.F.);+#9842 = EDGE_CURVE('',#9843,#9638,#9845,.T.);+#9843 = VERTEX_POINT('',#9844);+#9844 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+ 9.314404469578E-02));+#9845 = SURFACE_CURVE('',#9846,(#9850,#9857),.PCURVE_S1.);+#9846 = LINE('',#9847,#9848);+#9847 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+ 9.314404469578E-02));+#9848 = VECTOR('',#9849,1.);+#9849 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#9850 = PCURVE('',#8534,#9851);+#9851 = DEFINITIONAL_REPRESENTATION('',(#9852),#9856);+#9852 = LINE('',#9853,#9854);+#9853 = CARTESIAN_POINT('',(0.343079345823,-2.324999999998));+#9854 = VECTOR('',#9855,1.);+#9855 = DIRECTION('',(0.90618313999,-0.422885465342));+#9856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9857 = PCURVE('',#3875,#9858);+#9858 = DEFINITIONAL_REPRESENTATION('',(#9859),#9863);+#9859 = LINE('',#9860,#9861);+#9860 = CARTESIAN_POINT('',(4.470391181211E-12,0.));+#9861 = VECTOR('',#9862,1.);+#9862 = DIRECTION('',(1.,0.));+#9863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9864 = ORIENTED_EDGE('',*,*,#9865,.T.);+#9865 = EDGE_CURVE('',#9843,#9866,#9868,.T.);+#9866 = VERTEX_POINT('',#9867);+#9867 = CARTESIAN_POINT('',(3.29946203942,0.560692661497,+ 9.314404469578E-02));+#9868 = SURFACE_CURVE('',#9869,(#9873,#9880),.PCURVE_S1.);+#9869 = LINE('',#9870,#9871);+#9870 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+ 9.314404469578E-02));+#9871 = VECTOR('',#9872,1.);+#9872 = DIRECTION('',(-1.,0.,0.));+#9873 = PCURVE('',#8534,#9874);+#9874 = DEFINITIONAL_REPRESENTATION('',(#9875),#9879);+#9875 = LINE('',#9876,#9877);+#9876 = CARTESIAN_POINT('',(0.343079345823,-2.324999999998));+#9877 = VECTOR('',#9878,1.);+#9878 = DIRECTION('',(-1.,0.));+#9879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9880 = PCURVE('',#4008,#9881);+#9881 = DEFINITIONAL_REPRESENTATION('',(#9882),#9886);+#9882 = LINE('',#9883,#9884);+#9883 = CARTESIAN_POINT('',(-6.625000104066E-09,0.));+#9884 = VECTOR('',#9885,1.);+#9885 = DIRECTION('',(1.,0.));+#9886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9887 = ORIENTED_EDGE('',*,*,#9888,.F.);+#9888 = EDGE_CURVE('',#9889,#9866,#9891,.T.);+#9889 = VERTEX_POINT('',#9890);+#9890 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,+ 9.314404469578E-02));+#9891 = SURFACE_CURVE('',#9892,(#9896,#9903),.PCURVE_S1.);+#9892 = LINE('',#9893,#9894);+#9893 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,+ 9.314404469578E-02));+#9894 = VECTOR('',#9895,1.);+#9895 = DIRECTION('',(0.,-1.,0.));+#9896 = PCURVE('',#8534,#9897);+#9897 = DEFINITIONAL_REPRESENTATION('',(#9898),#9902);+#9898 = LINE('',#9899,#9900);+#9899 = CARTESIAN_POINT('',(0.218079345812,-2.074999999993));+#9900 = VECTOR('',#9901,1.);+#9901 = DIRECTION('',(0.,-1.));+#9902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9903 = PCURVE('',#3982,#9904);+#9904 = DEFINITIONAL_REPRESENTATION('',(#9905),#9909);+#9905 = LINE('',#9906,#9907);+#9906 = CARTESIAN_POINT('',(-4.000022535422E-12,0.));+#9907 = VECTOR('',#9908,1.);+#9908 = DIRECTION('',(1.,0.));+#9909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9910 = ORIENTED_EDGE('',*,*,#9911,.T.);+#9911 = EDGE_CURVE('',#9889,#9912,#9914,.T.);+#9912 = VERTEX_POINT('',#9913);+#9913 = CARTESIAN_POINT('',(3.424462039434,0.810692661502,+ 9.314404469578E-02));+#9914 = SURFACE_CURVE('',#9915,(#9919,#9926),.PCURVE_S1.);+#9915 = LINE('',#9916,#9917);+#9916 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,+ 9.314404469578E-02));+#9917 = VECTOR('',#9918,1.);+#9918 = DIRECTION('',(1.,0.,0.));+#9919 = PCURVE('',#8534,#9920);+#9920 = DEFINITIONAL_REPRESENTATION('',(#9921),#9925);+#9921 = LINE('',#9922,#9923);+#9922 = CARTESIAN_POINT('',(0.218079345812,-2.074999999993));+#9923 = VECTOR('',#9924,1.);+#9924 = DIRECTION('',(1.,0.));+#9925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9926 = PCURVE('',#3954,#9927);+#9927 = DEFINITIONAL_REPRESENTATION('',(#9928),#9932);+#9928 = LINE('',#9929,#9930);+#9929 = CARTESIAN_POINT('',(-4.9999999992E-02,0.));+#9930 = VECTOR('',#9931,1.);+#9931 = DIRECTION('',(1.,0.));+#9932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9933 = ORIENTED_EDGE('',*,*,#9934,.F.);+#9934 = EDGE_CURVE('',#9593,#9912,#9935,.T.);+#9935 = SURFACE_CURVE('',#9936,(#9940,#9947),.PCURVE_S1.);+#9936 = LINE('',#9937,#9938);+#9937 = CARTESIAN_POINT('',(3.5,0.845943709767,9.314404469578E-02));+#9938 = VECTOR('',#9939,1.);+#9939 = DIRECTION('',(-0.90618313999,-0.422885465342,0.));+#9940 = PCURVE('',#8534,#9941);+#9941 = DEFINITIONAL_REPRESENTATION('',(#9942),#9946);+#9942 = LINE('',#9943,#9944);+#9943 = CARTESIAN_POINT('',(0.418617306392,-2.039748951728));+#9944 = VECTOR('',#9945,1.);+#9945 = DIRECTION('',(-0.90618313999,-0.422885465342));+#9946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9947 = PCURVE('',#3926,#9948);+#9948 = DEFINITIONAL_REPRESENTATION('',(#9949),#9953);+#9949 = LINE('',#9950,#9951);+#9950 = CARTESIAN_POINT('',(-5.936554675872E-04,0.));+#9951 = VECTOR('',#9952,1.);+#9952 = DIRECTION('',(1.,0.));+#9953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9954 = ORIENTED_EDGE('',*,*,#9592,.T.);+#9955 = ORIENTED_EDGE('',*,*,#9956,.T.);+#9956 = EDGE_CURVE('',#9565,#9957,#9959,.T.);+#9957 = VERTEX_POINT('',#9958);+#9958 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,+ 9.314404469578E-02));+#9959 = SURFACE_CURVE('',#9960,(#9964,#9971),.PCURVE_S1.);+#9960 = LINE('',#9961,#9962);+#9961 = CARTESIAN_POINT('',(3.5,0.89598391805,9.314404469578E-02));+#9962 = VECTOR('',#9963,1.);+#9963 = DIRECTION('',(-1.,0.,0.));+#9964 = PCURVE('',#8534,#9965);+#9965 = DEFINITIONAL_REPRESENTATION('',(#9966),#9970);+#9966 = LINE('',#9967,#9968);+#9967 = CARTESIAN_POINT('',(0.418617306392,-1.989708743445));+#9968 = VECTOR('',#9969,1.);+#9969 = DIRECTION('',(-1.,0.));+#9970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9971 = PCURVE('',#9580,#9972);+#9972 = DEFINITIONAL_REPRESENTATION('',(#9973),#9977);+#9973 = LINE('',#9974,#9975);+#9974 = CARTESIAN_POINT('',(6.0741328296E-02,0.1));+#9975 = VECTOR('',#9976,1.);+#9976 = DIRECTION('',(-1.,0.));+#9977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9978 = ORIENTED_EDGE('',*,*,#9979,.T.);+#9979 = EDGE_CURVE('',#9957,#9980,#9982,.T.);+#9980 = VERTEX_POINT('',#9981);+#9981 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+ 9.314404469578E-02));+#9982 = SURFACE_CURVE('',#9983,(#9987,#9994),.PCURVE_S1.);+#9983 = LINE('',#9984,#9985);+#9984 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,+ 9.314404469578E-02));+#9985 = VECTOR('',#9986,1.);+#9986 = DIRECTION('',(0.,1.,0.));+#9987 = PCURVE('',#8534,#9988);+#9988 = DEFINITIONAL_REPRESENTATION('',(#9989),#9993);+#9989 = LINE('',#9990,#9991);+#9990 = CARTESIAN_POINT('',(0.368584098237,-1.989708743445));+#9991 = VECTOR('',#9992,1.);+#9992 = DIRECTION('',(0.,1.));+#9993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9994 = PCURVE('',#9995,#10000);+#9995 = PLANE('',#9996);+#9996 = AXIS2_PLACEMENT_3D('',#9997,#9998,#9999);+#9997 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,0.193144044696+ ));+#9998 = DIRECTION('',(1.,0.,0.));+#9999 = DIRECTION('',(-0.,1.,0.));+#10000 = DEFINITIONAL_REPRESENTATION('',(#10001),#10005);+#10001 = LINE('',#10002,#10003);+#10002 = CARTESIAN_POINT('',(0.747592270342,-0.1));+#10003 = VECTOR('',#10004,1.);+#10004 = DIRECTION('',(1.,0.));+#10005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10006 = ORIENTED_EDGE('',*,*,#10007,.T.);+#10007 = EDGE_CURVE('',#9980,#9486,#10008,.T.);+#10008 = SURFACE_CURVE('',#10009,(#10013,#10020),.PCURVE_S1.);+#10009 = LINE('',#10010,#10011);+#10010 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+ 9.314404469578E-02));+#10011 = VECTOR('',#10012,1.);+#10012 = DIRECTION('',(1.,0.,0.));+#10013 = PCURVE('',#8534,#10014);+#10014 = DEFINITIONAL_REPRESENTATION('',(#10015),#10019);+#10015 = LINE('',#10016,#10017);+#10016 = CARTESIAN_POINT('',(0.368584098237,-1.909708743443));+#10017 = VECTOR('',#10018,1.);+#10018 = DIRECTION('',(1.,0.));+#10019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10020 = PCURVE('',#9524,#10021);+#10021 = DEFINITIONAL_REPRESENTATION('',(#10022),#10026);+#10022 = LINE('',#10023,#10024);+#10023 = CARTESIAN_POINT('',(0.124291879868,0.1));+#10024 = VECTOR('',#10025,1.);+#10025 = DIRECTION('',(-1.,-0.));+#10026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10027 = ORIENTED_EDGE('',*,*,#9485,.T.);+#10028 = ORIENTED_EDGE('',*,*,#10029,.F.);+#10029 = EDGE_CURVE('',#10030,#9463,#10032,.T.);+#10030 = VERTEX_POINT('',#10031);+#10031 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+ 9.314404469578E-02));+#10032 = SURFACE_CURVE('',#10033,(#10037,#10044),.PCURVE_S1.);+#10033 = LINE('',#10034,#10035);+#10034 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+ 9.314404469578E-02));+#10035 = VECTOR('',#10036,1.);+#10036 = DIRECTION('',(0.90618313999,-0.422885465342,0.));+#10037 = PCURVE('',#8534,#10038);+#10038 = DEFINITIONAL_REPRESENTATION('',(#10039),#10043);+#10039 = LINE('',#10040,#10041);+#10040 = CARTESIAN_POINT('',(0.343079345819,-1.824999999996));+#10041 = VECTOR('',#10042,1.);+#10042 = DIRECTION('',(0.90618313999,-0.422885465342));+#10043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10044 = PCURVE('',#4046,#10045);+#10045 = DEFINITIONAL_REPRESENTATION('',(#10046),#10050);+#10046 = LINE('',#10047,#10048);+#10047 = CARTESIAN_POINT('',(0.,0.));+#10048 = VECTOR('',#10049,1.);+#10049 = DIRECTION('',(1.,0.));+#10050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10051 = ORIENTED_EDGE('',*,*,#10052,.T.);+#10052 = EDGE_CURVE('',#10030,#10053,#10055,.T.);+#10053 = VERTEX_POINT('',#10054);+#10054 = CARTESIAN_POINT('',(3.29946203942,1.060692661499,+ 9.314404469578E-02));+#10055 = SURFACE_CURVE('',#10056,(#10060,#10067),.PCURVE_S1.);+#10056 = LINE('',#10057,#10058);+#10057 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+ 9.314404469578E-02));+#10058 = VECTOR('',#10059,1.);+#10059 = DIRECTION('',(-1.,0.,0.));+#10060 = PCURVE('',#8534,#10061);+#10061 = DEFINITIONAL_REPRESENTATION('',(#10062),#10066);+#10062 = LINE('',#10063,#10064);+#10063 = CARTESIAN_POINT('',(0.343079345819,-1.824999999996));+#10064 = VECTOR('',#10065,1.);+#10065 = DIRECTION('',(-1.,0.));+#10066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10067 = PCURVE('',#4179,#10068);+#10068 = DEFINITIONAL_REPRESENTATION('',(#10069),#10073);+#10069 = LINE('',#10070,#10071);+#10070 = CARTESIAN_POINT('',(-6.621000192553E-09,0.));+#10071 = VECTOR('',#10072,1.);+#10072 = DIRECTION('',(1.,0.));+#10073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10074 = ORIENTED_EDGE('',*,*,#10075,.F.);+#10075 = EDGE_CURVE('',#10076,#10053,#10078,.T.);+#10076 = VERTEX_POINT('',#10077);+#10077 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,+ 9.314404469578E-02));+#10078 = SURFACE_CURVE('',#10079,(#10083,#10090),.PCURVE_S1.);+#10079 = LINE('',#10080,#10081);+#10080 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,+ 9.314404469578E-02));+#10081 = VECTOR('',#10082,1.);+#10082 = DIRECTION('',(0.,-1.,0.));+#10083 = PCURVE('',#8534,#10084);+#10084 = DEFINITIONAL_REPRESENTATION('',(#10085),#10089);+#10085 = LINE('',#10086,#10087);+#10086 = CARTESIAN_POINT('',(0.218079345812,-1.575));+#10087 = VECTOR('',#10088,1.);+#10088 = DIRECTION('',(0.,-1.));+#10089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10090 = PCURVE('',#4153,#10091);+#10091 = DEFINITIONAL_REPRESENTATION('',(#10092),#10096);+#10092 = LINE('',#10093,#10094);+#10093 = CARTESIAN_POINT('',(3.99991151312E-12,0.));+#10094 = VECTOR('',#10095,1.);+#10095 = DIRECTION('',(1.,0.));+#10096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10097 = ORIENTED_EDGE('',*,*,#10098,.T.);+#10098 = EDGE_CURVE('',#10076,#10099,#10101,.T.);+#10099 = VERTEX_POINT('',#10100);+#10100 = CARTESIAN_POINT('',(3.42446203942,1.310692661495,+ 9.314404469578E-02));+#10101 = SURFACE_CURVE('',#10102,(#10106,#10113),.PCURVE_S1.);+#10102 = LINE('',#10103,#10104);+#10103 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,+ 9.314404469578E-02));+#10104 = VECTOR('',#10105,1.);+#10105 = DIRECTION('',(1.,0.,0.));+#10106 = PCURVE('',#8534,#10107);+#10107 = DEFINITIONAL_REPRESENTATION('',(#10108),#10112);+#10108 = LINE('',#10109,#10110);+#10109 = CARTESIAN_POINT('',(0.218079345812,-1.575));+#10110 = VECTOR('',#10111,1.);+#10111 = DIRECTION('',(1.,0.));+#10112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10113 = PCURVE('',#4125,#10114);+#10114 = DEFINITIONAL_REPRESENTATION('',(#10115),#10119);+#10115 = LINE('',#10116,#10117);+#10116 = CARTESIAN_POINT('',(-4.9999993389E-02,0.));+#10117 = VECTOR('',#10118,1.);+#10118 = DIRECTION('',(1.,0.));+#10119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10120 = ORIENTED_EDGE('',*,*,#10121,.F.);+#10121 = EDGE_CURVE('',#9418,#10099,#10122,.T.);+#10122 = SURFACE_CURVE('',#10123,(#10127,#10134),.PCURVE_S1.);+#10123 = LINE('',#10124,#10125);+#10124 = CARTESIAN_POINT('',(3.5,1.345943709768,9.314404469578E-02));+#10125 = VECTOR('',#10126,1.);+#10126 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#10127 = PCURVE('',#8534,#10128);+#10128 = DEFINITIONAL_REPRESENTATION('',(#10129),#10133);+#10129 = LINE('',#10130,#10131);+#10130 = CARTESIAN_POINT('',(0.418617306392,-1.539748951727));+#10131 = VECTOR('',#10132,1.);+#10132 = DIRECTION('',(-0.906183139987,-0.422885465348));+#10133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10134 = PCURVE('',#4097,#10135);+#10135 = DEFINITIONAL_REPRESENTATION('',(#10136),#10140);+#10136 = LINE('',#10137,#10138);+#10137 = CARTESIAN_POINT('',(-5.936554680101E-04,0.));+#10138 = VECTOR('',#10139,1.);+#10139 = DIRECTION('',(1.,0.));+#10140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10141 = ORIENTED_EDGE('',*,*,#9417,.T.);+#10142 = ORIENTED_EDGE('',*,*,#10143,.F.);+#10143 = EDGE_CURVE('',#10144,#9390,#10146,.T.);+#10144 = VERTEX_POINT('',#10145);+#10145 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+ 9.314404469578E-02));+#10146 = SURFACE_CURVE('',#10147,(#10151,#10158),.PCURVE_S1.);+#10147 = LINE('',#10148,#10149);+#10148 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+ 9.314404469578E-02));+#10149 = VECTOR('',#10150,1.);+#10150 = DIRECTION('',(1.,0.,0.));+#10151 = PCURVE('',#8534,#10152);+#10152 = DEFINITIONAL_REPRESENTATION('',(#10153),#10157);+#10153 = LINE('',#10154,#10155);+#10154 = CARTESIAN_POINT('',(0.368584098237,-1.489708743443));+#10155 = VECTOR('',#10156,1.);+#10156 = DIRECTION('',(1.,0.));+#10157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10158 = PCURVE('',#9405,#10159);+#10159 = DEFINITIONAL_REPRESENTATION('',(#10160),#10164);+#10160 = LINE('',#10161,#10162);+#10161 = CARTESIAN_POINT('',(1.0708120141E-02,0.1));+#10162 = VECTOR('',#10163,1.);+#10163 = DIRECTION('',(1.,0.));+#10164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10165 = ORIENTED_EDGE('',*,*,#10166,.T.);+#10166 = EDGE_CURVE('',#10144,#10167,#10169,.T.);+#10167 = VERTEX_POINT('',#10168);+#10168 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,+ 9.314404469578E-02));+#10169 = SURFACE_CURVE('',#10170,(#10174,#10181),.PCURVE_S1.);+#10170 = LINE('',#10171,#10172);+#10171 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+ 9.314404469578E-02));+#10172 = VECTOR('',#10173,1.);+#10173 = DIRECTION('',(1.110223024651E-14,1.,0.));+#10174 = PCURVE('',#8534,#10175);+#10175 = DEFINITIONAL_REPRESENTATION('',(#10176),#10180);+#10176 = LINE('',#10177,#10178);+#10177 = CARTESIAN_POINT('',(0.368584098237,-1.489708743443));+#10178 = VECTOR('',#10179,1.);+#10179 = DIRECTION('',(1.110223024651E-14,1.));+#10180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10181 = PCURVE('',#10182,#10187);+#10182 = PLANE('',#10183);+#10183 = AXIS2_PLACEMENT_3D('',#10184,#10185,#10186);+#10184 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,+ 0.193144044696));+#10185 = DIRECTION('',(1.,0.,0.));+#10186 = DIRECTION('',(-0.,1.,0.));+#10187 = DEFINITIONAL_REPRESENTATION('',(#10188),#10192);+#10188 = LINE('',#10189,#10190);+#10189 = CARTESIAN_POINT('',(1.247592270344,-0.1));+#10190 = VECTOR('',#10191,1.);+#10191 = DIRECTION('',(1.,0.));+#10192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10193 = ORIENTED_EDGE('',*,*,#10194,.T.);+#10194 = EDGE_CURVE('',#10167,#9311,#10195,.T.);+#10195 = SURFACE_CURVE('',#10196,(#10200,#10207),.PCURVE_S1.);+#10196 = LINE('',#10197,#10198);+#10197 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,+ 9.314404469578E-02));+#10198 = VECTOR('',#10199,1.);+#10199 = DIRECTION('',(1.,0.,0.));+#10200 = PCURVE('',#8534,#10201);+#10201 = DEFINITIONAL_REPRESENTATION('',(#10202),#10206);+#10202 = LINE('',#10203,#10204);+#10203 = CARTESIAN_POINT('',(0.368584098237,-1.409708743445));+#10204 = VECTOR('',#10205,1.);+#10205 = DIRECTION('',(1.,0.));+#10206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10207 = PCURVE('',#9349,#10208);+#10208 = DEFINITIONAL_REPRESENTATION('',(#10209),#10213);+#10209 = LINE('',#10210,#10211);+#10210 = CARTESIAN_POINT('',(0.124291879868,0.1));+#10211 = VECTOR('',#10212,1.);+#10212 = DIRECTION('',(-1.,-0.));+#10213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10214 = ORIENTED_EDGE('',*,*,#9310,.T.);+#10215 = ORIENTED_EDGE('',*,*,#10216,.F.);+#10216 = EDGE_CURVE('',#10217,#9288,#10219,.T.);+#10217 = VERTEX_POINT('',#10218);+#10218 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+ 9.314404469578E-02));+#10219 = SURFACE_CURVE('',#10220,(#10224,#10231),.PCURVE_S1.);+#10220 = LINE('',#10221,#10222);+#10221 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+ 9.314404469578E-02));+#10222 = VECTOR('',#10223,1.);+#10223 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#10224 = PCURVE('',#8534,#10225);+#10225 = DEFINITIONAL_REPRESENTATION('',(#10226),#10230);+#10226 = LINE('',#10227,#10228);+#10227 = CARTESIAN_POINT('',(0.343079345815,-1.324999999994));+#10228 = VECTOR('',#10229,1.);+#10229 = DIRECTION('',(0.906183139987,-0.422885465348));+#10230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10231 = PCURVE('',#3704,#10232);+#10232 = DEFINITIONAL_REPRESENTATION('',(#10233),#10237);+#10233 = LINE('',#10234,#10235);+#10234 = CARTESIAN_POINT('',(-4.470391181211E-12,0.));+#10235 = VECTOR('',#10236,1.);+#10236 = DIRECTION('',(1.,0.));+#10237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10238 = ORIENTED_EDGE('',*,*,#10239,.T.);+#10239 = EDGE_CURVE('',#10217,#10240,#10242,.T.);+#10240 = VERTEX_POINT('',#10241);+#10241 = CARTESIAN_POINT('',(3.29946203942,1.560692661501,+ 9.314404469578E-02));+#10242 = SURFACE_CURVE('',#10243,(#10247,#10254),.PCURVE_S1.);+#10243 = LINE('',#10244,#10245);+#10244 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+ 9.314404469578E-02));+#10245 = VECTOR('',#10246,1.);+#10246 = DIRECTION('',(-1.,0.,0.));+#10247 = PCURVE('',#8534,#10248);+#10248 = DEFINITIONAL_REPRESENTATION('',(#10249),#10253);+#10249 = LINE('',#10250,#10251);+#10250 = CARTESIAN_POINT('',(0.343079345815,-1.324999999994));+#10251 = VECTOR('',#10252,1.);+#10252 = DIRECTION('',(-1.,0.));+#10253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10254 = PCURVE('',#3837,#10255);+#10255 = DEFINITIONAL_REPRESENTATION('',(#10256),#10260);+#10256 = LINE('',#10257,#10258);+#10257 = CARTESIAN_POINT('',(-6.61700028104E-09,0.));+#10258 = VECTOR('',#10259,1.);+#10259 = DIRECTION('',(1.,0.));+#10260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10261 = ORIENTED_EDGE('',*,*,#10262,.F.);+#10262 = EDGE_CURVE('',#10263,#10240,#10265,.T.);+#10263 = VERTEX_POINT('',#10264);+#10264 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,+ 9.314404469578E-02));+#10265 = SURFACE_CURVE('',#10266,(#10270,#10277),.PCURVE_S1.);+#10266 = LINE('',#10267,#10268);+#10267 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,+ 9.314404469578E-02));+#10268 = VECTOR('',#10269,1.);+#10269 = DIRECTION('',(0.,-1.,0.));+#10270 = PCURVE('',#8534,#10271);+#10271 = DEFINITIONAL_REPRESENTATION('',(#10272),#10276);+#10272 = LINE('',#10273,#10274);+#10273 = CARTESIAN_POINT('',(0.218079345812,-1.074999999998));+#10274 = VECTOR('',#10275,1.);+#10275 = DIRECTION('',(0.,-1.));+#10276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10277 = PCURVE('',#3811,#10278);+#10278 = DEFINITIONAL_REPRESENTATION('',(#10279),#10283);+#10279 = LINE('',#10280,#10281);+#10280 = CARTESIAN_POINT('',(1.99995575656E-12,0.));+#10281 = VECTOR('',#10282,1.);+#10282 = DIRECTION('',(1.,0.));+#10283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10284 = ORIENTED_EDGE('',*,*,#10285,.T.);+#10285 = EDGE_CURVE('',#10263,#10286,#10288,.T.);+#10286 = VERTEX_POINT('',#10287);+#10287 = CARTESIAN_POINT('',(3.424462039423,1.810692661497,+ 9.314404469578E-02));+#10288 = SURFACE_CURVE('',#10289,(#10293,#10300),.PCURVE_S1.);+#10289 = LINE('',#10290,#10291);+#10290 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,+ 9.314404469578E-02));+#10291 = VECTOR('',#10292,1.);+#10292 = DIRECTION('',(1.,0.,0.));+#10293 = PCURVE('',#8534,#10294);+#10294 = DEFINITIONAL_REPRESENTATION('',(#10295),#10299);+#10295 = LINE('',#10296,#10297);+#10296 = CARTESIAN_POINT('',(0.218079345812,-1.074999999998));+#10297 = VECTOR('',#10298,1.);+#10298 = DIRECTION('',(1.,0.));+#10299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10300 = PCURVE('',#3783,#10301);+#10301 = DEFINITIONAL_REPRESENTATION('',(#10302),#10306);+#10302 = LINE('',#10303,#10304);+#10303 = CARTESIAN_POINT('',(-4.9999999992E-02,0.));+#10304 = VECTOR('',#10305,1.);+#10305 = DIRECTION('',(1.,0.));+#10306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10307 = ORIENTED_EDGE('',*,*,#10308,.F.);+#10308 = EDGE_CURVE('',#9243,#10286,#10309,.T.);+#10309 = SURFACE_CURVE('',#10310,(#10314,#10321),.PCURVE_S1.);+#10310 = LINE('',#10311,#10312);+#10311 = CARTESIAN_POINT('',(3.5,1.845943709768,9.314404469578E-02));+#10312 = VECTOR('',#10313,1.);+#10313 = DIRECTION('',(-0.906183139987,-0.422885465348,0.));+#10314 = PCURVE('',#8534,#10315);+#10315 = DEFINITIONAL_REPRESENTATION('',(#10316),#10320);+#10316 = LINE('',#10317,#10318);+#10317 = CARTESIAN_POINT('',(0.418617306392,-1.039748951727));+#10318 = VECTOR('',#10319,1.);+#10319 = DIRECTION('',(-0.906183139987,-0.422885465348));+#10320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10321 = PCURVE('',#3755,#10322);+#10322 = DEFINITIONAL_REPRESENTATION('',(#10323),#10327);+#10323 = LINE('',#10324,#10325);+#10324 = CARTESIAN_POINT('',(-5.936554680101E-04,0.));+#10325 = VECTOR('',#10326,1.);+#10326 = DIRECTION('',(1.,0.));+#10327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10328 = ORIENTED_EDGE('',*,*,#9242,.T.);+#10329 = ORIENTED_EDGE('',*,*,#10330,.T.);+#10330 = EDGE_CURVE('',#9215,#10331,#10333,.T.);+#10331 = VERTEX_POINT('',#10332);+#10332 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+ 9.314404469578E-02));+#10333 = SURFACE_CURVE('',#10334,(#10338,#10345),.PCURVE_S1.);+#10334 = LINE('',#10335,#10336);+#10335 = CARTESIAN_POINT('',(3.5,1.895983918053,9.314404469578E-02));+#10336 = VECTOR('',#10337,1.);+#10337 = DIRECTION('',(-1.,0.,0.));+#10338 = PCURVE('',#8534,#10339);+#10339 = DEFINITIONAL_REPRESENTATION('',(#10340),#10344);+#10340 = LINE('',#10341,#10342);+#10341 = CARTESIAN_POINT('',(0.418617306392,-0.989708743442));+#10342 = VECTOR('',#10343,1.);+#10343 = DIRECTION('',(-1.,0.));+#10344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10345 = PCURVE('',#9230,#10346);+#10346 = DEFINITIONAL_REPRESENTATION('',(#10347),#10351);+#10347 = LINE('',#10348,#10349);+#10348 = CARTESIAN_POINT('',(6.0741328296E-02,0.1));+#10349 = VECTOR('',#10350,1.);+#10350 = DIRECTION('',(-1.,0.));+#10351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10352 = ORIENTED_EDGE('',*,*,#10353,.T.);+#10353 = EDGE_CURVE('',#10331,#10354,#10356,.T.);+#10354 = VERTEX_POINT('',#10355);+#10355 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+ 9.314404469578E-02));+#10356 = SURFACE_CURVE('',#10357,(#10361,#10368),.PCURVE_S1.);+#10357 = LINE('',#10358,#10359);+#10358 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+ 9.314404469578E-02));+#10359 = VECTOR('',#10360,1.);+#10360 = DIRECTION('',(0.,1.,0.));+#10361 = PCURVE('',#8534,#10362);+#10362 = DEFINITIONAL_REPRESENTATION('',(#10363),#10367);+#10363 = LINE('',#10364,#10365);+#10364 = CARTESIAN_POINT('',(0.368584098237,-0.989708743442));+#10365 = VECTOR('',#10366,1.);+#10366 = DIRECTION('',(0.,1.));+#10367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10368 = PCURVE('',#10369,#10374);+#10369 = PLANE('',#10370);+#10370 = AXIS2_PLACEMENT_3D('',#10371,#10372,#10373);+#10371 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,+ 0.193144044696));+#10372 = DIRECTION('',(1.,0.,0.));+#10373 = DIRECTION('',(-0.,1.,0.));+#10374 = DEFINITIONAL_REPRESENTATION('',(#10375),#10379);+#10375 = LINE('',#10376,#10377);+#10376 = CARTESIAN_POINT('',(1.747592270345,-0.1));+#10377 = VECTOR('',#10378,1.);+#10378 = DIRECTION('',(1.,0.));+#10379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10380 = ORIENTED_EDGE('',*,*,#10381,.T.);+#10381 = EDGE_CURVE('',#10354,#9136,#10382,.T.);+#10382 = SURFACE_CURVE('',#10383,(#10387,#10394),.PCURVE_S1.);+#10383 = LINE('',#10384,#10385);+#10384 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+ 9.314404469578E-02));+#10385 = VECTOR('',#10386,1.);+#10386 = DIRECTION('',(1.,0.,0.));+#10387 = PCURVE('',#8534,#10388);+#10388 = DEFINITIONAL_REPRESENTATION('',(#10389),#10393);+#10389 = LINE('',#10390,#10391);+#10390 = CARTESIAN_POINT('',(0.368584098237,-0.909708743443));+#10391 = VECTOR('',#10392,1.);+#10392 = DIRECTION('',(1.,0.));+#10393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10394 = PCURVE('',#9174,#10395);+#10395 = DEFINITIONAL_REPRESENTATION('',(#10396),#10400);+#10396 = LINE('',#10397,#10398);+#10397 = CARTESIAN_POINT('',(0.124291879868,0.1));+#10398 = VECTOR('',#10399,1.);+#10399 = DIRECTION('',(-1.,-0.));+#10400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10401 = ORIENTED_EDGE('',*,*,#9135,.T.);+#10402 = ORIENTED_EDGE('',*,*,#10403,.F.);+#10403 = EDGE_CURVE('',#10404,#9113,#10406,.T.);+#10404 = VERTEX_POINT('',#10405);+#10405 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+ 9.314404469578E-02));+#10406 = SURFACE_CURVE('',#10407,(#10411,#10418),.PCURVE_S1.);+#10407 = LINE('',#10408,#10409);+#10408 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+ 9.314404469578E-02));+#10409 = VECTOR('',#10410,1.);+#10410 = DIRECTION('',(0.906183139987,-0.422885465349,0.));+#10411 = PCURVE('',#8534,#10412);+#10412 = DEFINITIONAL_REPRESENTATION('',(#10413),#10417);+#10413 = LINE('',#10414,#10415);+#10414 = CARTESIAN_POINT('',(0.343079339198,-0.824999999993));+#10415 = VECTOR('',#10416,1.);+#10416 = DIRECTION('',(0.906183139987,-0.422885465349));+#10417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10418 = PCURVE('',#3589,#10419);+#10419 = DEFINITIONAL_REPRESENTATION('',(#10420),#10424);+#10420 = LINE('',#10421,#10422);+#10421 = CARTESIAN_POINT('',(8.276473409007E-02,0.));+#10422 = VECTOR('',#10423,1.);+#10423 = DIRECTION('',(-1.,0.));+#10424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10425 = ORIENTED_EDGE('',*,*,#10426,.T.);+#10426 = EDGE_CURVE('',#10404,#10427,#10429,.T.);+#10427 = VERTEX_POINT('',#10428);+#10428 = CARTESIAN_POINT('',(3.29946203942,2.060692661502,+ 9.314404469578E-02));+#10429 = SURFACE_CURVE('',#10430,(#10434,#10441),.PCURVE_S1.);+#10430 = LINE('',#10431,#10432);+#10431 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,+ 9.314404469578E-02));+#10432 = VECTOR('',#10433,1.);+#10433 = DIRECTION('',(-1.,0.,0.));+#10434 = PCURVE('',#8534,#10435);+#10435 = DEFINITIONAL_REPRESENTATION('',(#10436),#10440);+#10436 = LINE('',#10437,#10438);+#10437 = CARTESIAN_POINT('',(0.343079339198,-0.824999999993));+#10438 = VECTOR('',#10439,1.);+#10439 = DIRECTION('',(-1.,0.));+#10440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10441 = PCURVE('',#3561,#10442);+#10442 = DEFINITIONAL_REPRESENTATION('',(#10443),#10447);+#10443 = LINE('',#10444,#10445);+#10444 = CARTESIAN_POINT('',(0.,0.));+#10445 = VECTOR('',#10446,1.);+#10446 = DIRECTION('',(1.,0.));+#10447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10448 = ORIENTED_EDGE('',*,*,#10449,.F.);+#10449 = EDGE_CURVE('',#10450,#10427,#10452,.T.);+#10450 = VERTEX_POINT('',#10451);+#10451 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,+ 9.314404469578E-02));+#10452 = SURFACE_CURVE('',#10453,(#10457,#10464),.PCURVE_S1.);+#10453 = LINE('',#10454,#10455);+#10454 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,+ 9.314404469578E-02));+#10455 = VECTOR('',#10456,1.);+#10456 = DIRECTION('',(2.026728773275E-04,-0.999999979462,0.));+#10457 = PCURVE('',#8534,#10458);+#10458 = DEFINITIONAL_REPRESENTATION('',(#10459),#10463);+#10459 = LINE('',#10460,#10461);+#10460 = CARTESIAN_POINT('',(0.218038830115,-0.625093151387));+#10461 = VECTOR('',#10462,1.);+#10462 = DIRECTION('',(2.026728773275E-04,-0.999999979462));+#10463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10464 = PCURVE('',#3533,#10465);+#10465 = DEFINITIONAL_REPRESENTATION('',(#10466),#10470);+#10466 = LINE('',#10467,#10468);+#10467 = CARTESIAN_POINT('',(0.,0.));+#10468 = VECTOR('',#10469,1.);+#10469 = DIRECTION('',(1.,0.));+#10470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10471 = ORIENTED_EDGE('',*,*,#10472,.F.);+#10472 = EDGE_CURVE('',#10473,#10450,#10475,.T.);+#10473 = VERTEX_POINT('',#10474);+#10474 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+ 9.314404469578E-02));+#10475 = SURFACE_CURVE('',#10476,(#10480,#10487),.PCURVE_S1.);+#10476 = LINE('',#10477,#10478);+#10477 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+ 9.314404469578E-02));+#10478 = VECTOR('',#10479,1.);+#10479 = DIRECTION('',(1.,0.,0.));+#10480 = PCURVE('',#8534,#10481);+#10481 = DEFINITIONAL_REPRESENTATION('',(#10482),#10486);+#10482 = LINE('',#10483,#10484);+#10483 = CARTESIAN_POINT('',(-0.781920654192,-0.625093151387));+#10484 = VECTOR('',#10485,1.);+#10485 = DIRECTION('',(1.,0.));+#10486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10487 = PCURVE('',#3505,#10488);+#10488 = DEFINITIONAL_REPRESENTATION('',(#10489),#10493);+#10489 = LINE('',#10490,#10491);+#10490 = CARTESIAN_POINT('',(0.,0.));+#10491 = VECTOR('',#10492,1.);+#10492 = DIRECTION('',(1.,0.));+#10493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10494 = ORIENTED_EDGE('',*,*,#10495,.F.);+#10495 = EDGE_CURVE('',#10496,#10473,#10498,.T.);+#10496 = VERTEX_POINT('',#10497);+#10497 = CARTESIAN_POINT('',(2.199462039413,2.160599510114,+ 9.314404469578E-02));+#10498 = SURFACE_CURVE('',#10499,(#10504,#10515),.PCURVE_S1.);+#10499 = CIRCLE('',#10500,0.100000000003);+#10500 = AXIS2_PLACEMENT_3D('',#10501,#10502,#10503);+#10501 = CARTESIAN_POINT('',(2.299462039416,2.160599510105,+ 9.314404469578E-02));+#10502 = DIRECTION('',(0.,0.,-1.));+#10503 = DIRECTION('',(-1.,8.970602038714E-11,0.));+#10504 = PCURVE('',#8534,#10505);+#10505 = DEFINITIONAL_REPRESENTATION('',(#10506),#10514);+#10506 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10507,#10508,#10509,#10510+ ,#10511,#10512,#10513),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10507 = CARTESIAN_POINT('',(-0.881920654195,-0.725093151381));+#10508 = CARTESIAN_POINT('',(-0.881920654179,-0.551888070619));+#10509 = CARTESIAN_POINT('',(-0.731920654183,-0.638490611013));+#10510 = CARTESIAN_POINT('',(-0.581920654186,-0.725093151408));+#10511 = CARTESIAN_POINT('',(-0.731920654198,-0.811695691776));+#10512 = CARTESIAN_POINT('',(-0.881920654211,-0.898298232143));+#10513 = CARTESIAN_POINT('',(-0.881920654195,-0.725093151381));+#10514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10515 = PCURVE('',#3477,#10516);+#10516 = DEFINITIONAL_REPRESENTATION('',(#10517),#10521);+#10517 = LINE('',#10518,#10519);+#10518 = CARTESIAN_POINT('',(3.14159265365,0.));+#10519 = VECTOR('',#10520,1.);+#10520 = DIRECTION('',(1.,0.));+#10521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10522 = ORIENTED_EDGE('',*,*,#10523,.F.);+#10523 = EDGE_CURVE('',#10524,#10496,#10526,.T.);+#10524 = VERTEX_POINT('',#10525);+#10525 = CARTESIAN_POINT('',(2.199462039417,0.310692661587,+ 9.314404469578E-02));+#10526 = SURFACE_CURVE('',#10527,(#10531,#10538),.PCURVE_S1.);+#10527 = LINE('',#10528,#10529);+#10528 = CARTESIAN_POINT('',(2.199462039417,0.310692661587,+ 9.314404469578E-02));+#10529 = VECTOR('',#10530,1.);+#10530 = DIRECTION('',(-2.088284628802E-12,1.,0.));+#10531 = PCURVE('',#8534,#10532);+#10532 = DEFINITIONAL_REPRESENTATION('',(#10533),#10537);+#10533 = LINE('',#10534,#10535);+#10534 = CARTESIAN_POINT('',(-0.881920654191,-2.574999999908));+#10535 = VECTOR('',#10536,1.);+#10536 = DIRECTION('',(-2.088284628802E-12,1.));+#10537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10538 = PCURVE('',#3444,#10539);+#10539 = DEFINITIONAL_REPRESENTATION('',(#10540),#10544);+#10540 = LINE('',#10541,#10542);+#10541 = CARTESIAN_POINT('',(3.199995823877E-11,0.));+#10542 = VECTOR('',#10543,1.);+#10543 = DIRECTION('',(1.,0.));+#10544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10545 = ORIENTED_EDGE('',*,*,#10546,.F.);+#10546 = EDGE_CURVE('',#10547,#10524,#10549,.T.);+#10547 = VERTEX_POINT('',#10548);+#10548 = CARTESIAN_POINT('',(2.299462039513,0.210692661562,+ 9.314404469578E-02));+#10549 = SURFACE_CURVE('',#10550,(#10555,#10566),.PCURVE_S1.);+#10550 = CIRCLE('',#10551,9.999999999127E-02);+#10551 = AXIS2_PLACEMENT_3D('',#10552,#10553,#10554);+#10552 = CARTESIAN_POINT('',(2.299462039416,0.310692661553,+ 9.314404469578E-02));+#10553 = DIRECTION('',(0.,0.,-1.));+#10554 = DIRECTION('',(9.686340619332E-10,-1.,0.));+#10555 = PCURVE('',#8534,#10556);+#10556 = DEFINITIONAL_REPRESENTATION('',(#10557),#10565);+#10557 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10558,#10559,#10560,#10561+ ,#10562,#10563,#10564),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10558 = CARTESIAN_POINT('',(-0.781920654095,-2.674999999933));+#10559 = CARTESIAN_POINT('',(-0.955125734837,-2.675000000101));+#10560 = CARTESIAN_POINT('',(-0.868523194611,-2.52500000003));+#10561 = CARTESIAN_POINT('',(-0.781920654386,-2.374999999959));+#10562 = CARTESIAN_POINT('',(-0.69531811387,-2.524999999862));+#10563 = CARTESIAN_POINT('',(-0.608715573353,-2.674999999765));+#10564 = CARTESIAN_POINT('',(-0.781920654095,-2.674999999933));+#10565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10566 = PCURVE('',#3416,#10567);+#10567 = DEFINITIONAL_REPRESENTATION('',(#10568),#10572);+#10568 = LINE('',#10569,#10570);+#10569 = CARTESIAN_POINT('',(3.141592652621,0.));+#10570 = VECTOR('',#10571,1.);+#10571 = DIRECTION('',(1.,0.));+#10572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10573 = ORIENTED_EDGE('',*,*,#10574,.F.);+#10574 = EDGE_CURVE('',#10575,#10547,#10577,.T.);+#10575 = VERTEX_POINT('',#10576);+#10576 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,+ 9.314404469578E-02));+#10577 = SURFACE_CURVE('',#10578,(#10582,#10589),.PCURVE_S1.);+#10578 = LINE('',#10579,#10580);+#10579 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,+ 9.314404469578E-02));+#10580 = VECTOR('',#10581,1.);+#10581 = DIRECTION('',(-1.,5.593553398402E-11,0.));+#10582 = PCURVE('',#8534,#10583);+#10583 = DEFINITIONAL_REPRESENTATION('',(#10584),#10588);+#10584 = LINE('',#10585,#10586);+#10585 = CARTESIAN_POINT('',(0.218079345812,-2.674999999997));+#10586 = VECTOR('',#10587,1.);+#10587 = DIRECTION('',(-1.,5.593553398402E-11));+#10588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10589 = PCURVE('',#3383,#10590);+#10590 = DEFINITIONAL_REPRESENTATION('',(#10591),#10595);+#10591 = LINE('',#10592,#10593);+#10592 = CARTESIAN_POINT('',(0.,0.));+#10593 = VECTOR('',#10594,1.);+#10594 = DIRECTION('',(1.,0.));+#10595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10596 = ORIENTED_EDGE('',*,*,#10597,.F.);+#10597 = EDGE_CURVE('',#10598,#10575,#10600,.T.);+#10598 = VERTEX_POINT('',#10599);+#10599 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,+ 9.314404469578E-02));+#10600 = SURFACE_CURVE('',#10601,(#10605,#10612),.PCURVE_S1.);+#10601 = LINE('',#10602,#10603);+#10602 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,+ 9.314404469578E-02));+#10603 = VECTOR('',#10604,1.);+#10604 = DIRECTION('',(0.,-1.,0.));+#10605 = PCURVE('',#8534,#10606);+#10606 = DEFINITIONAL_REPRESENTATION('',(#10607),#10611);+#10607 = LINE('',#10608,#10609);+#10608 = CARTESIAN_POINT('',(0.218079345812,-2.574999999994));+#10609 = VECTOR('',#10610,1.);+#10610 = DIRECTION('',(0.,-1.));+#10611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10612 = PCURVE('',#3355,#10613);+#10613 = DEFINITIONAL_REPRESENTATION('',(#10614),#10618);+#10614 = LINE('',#10615,#10616);+#10615 = CARTESIAN_POINT('',(-2.999989145991E-12,0.));+#10616 = VECTOR('',#10617,1.);+#10617 = DIRECTION('',(1.,0.));+#10618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10619 = ORIENTED_EDGE('',*,*,#10620,.T.);+#10620 = EDGE_CURVE('',#10598,#10621,#10623,.T.);+#10621 = VERTEX_POINT('',#10622);+#10622 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,+ 9.314404469578E-02));+#10623 = SURFACE_CURVE('',#10624,(#10628,#10635),.PCURVE_S1.);+#10624 = LINE('',#10625,#10626);+#10625 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,+ 9.314404469578E-02));+#10626 = VECTOR('',#10627,1.);+#10627 = DIRECTION('',(1.,0.,0.));+#10628 = PCURVE('',#8534,#10629);+#10629 = DEFINITIONAL_REPRESENTATION('',(#10630),#10634);+#10630 = LINE('',#10631,#10632);+#10631 = CARTESIAN_POINT('',(0.218079345812,-2.574999999994));+#10632 = VECTOR('',#10633,1.);+#10633 = DIRECTION('',(1.,0.));+#10634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10635 = PCURVE('',#3327,#10636);+#10636 = DEFINITIONAL_REPRESENTATION('',(#10637),#10641);+#10637 = LINE('',#10638,#10639);+#10638 = CARTESIAN_POINT('',(-4.9999993389E-02,0.));+#10639 = VECTOR('',#10640,1.);+#10640 = DIRECTION('',(1.,0.));+#10641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10642 = ORIENTED_EDGE('',*,*,#10643,.F.);+#10643 = EDGE_CURVE('',#8517,#10621,#10644,.T.);+#10644 = SURFACE_CURVE('',#10645,(#10649,#10656),.PCURVE_S1.);+#10645 = LINE('',#10646,#10647);+#10646 = CARTESIAN_POINT('',(3.5,0.345943712857,9.314404469578E-02));+#10647 = VECTOR('',#10648,1.);+#10648 = DIRECTION('',(-0.906183139998,-0.422885465325,0.));+#10649 = PCURVE('',#8534,#10650);+#10650 = DEFINITIONAL_REPRESENTATION('',(#10651),#10655);+#10651 = LINE('',#10652,#10653);+#10652 = CARTESIAN_POINT('',(0.418617306392,-2.539748948638));+#10653 = VECTOR('',#10654,1.);+#10654 = DIRECTION('',(-0.906183139998,-0.422885465325));+#10655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10656 = PCURVE('',#3299,#10657);+#10657 = DEFINITIONAL_REPRESENTATION('',(#10658),#10662);+#10658 = LINE('',#10659,#10660);+#10659 = CARTESIAN_POINT('',(8.335838955681E-02,0.));+#10660 = VECTOR('',#10661,1.);+#10661 = DIRECTION('',(-1.,0.));+#10662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10663 = ADVANCED_FACE('',(#10664),#8971,.F.);+#10664 = FACE_BOUND('',#10665,.F.);+#10665 = EDGE_LOOP('',(#10666,#10667,#10690,#10718,#10739,#10740,#10763,+ #10786,#10814,#10837));+#10666 = ORIENTED_EDGE('',*,*,#9067,.T.);+#10667 = ORIENTED_EDGE('',*,*,#10668,.F.);+#10668 = EDGE_CURVE('',#10669,#9040,#10671,.T.);+#10669 = VERTEX_POINT('',#10670);+#10670 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+ 9.314404469578E-02));+#10671 = SURFACE_CURVE('',#10672,(#10676,#10683),.PCURVE_S1.);+#10672 = LINE('',#10673,#10674);+#10673 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+ 9.314404469578E-02));+#10674 = VECTOR('',#10675,1.);+#10675 = DIRECTION('',(1.,0.,0.));+#10676 = PCURVE('',#8971,#10677);+#10677 = DEFINITIONAL_REPRESENTATION('',(#10678),#10682);+#10678 = LINE('',#10679,#10680);+#10679 = CARTESIAN_POINT('',(0.368584098237,-3.9708744994E-02));+#10680 = VECTOR('',#10681,1.);+#10681 = DIRECTION('',(1.,0.));+#10682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10683 = PCURVE('',#9055,#10684);+#10684 = DEFINITIONAL_REPRESENTATION('',(#10685),#10689);+#10685 = LINE('',#10686,#10687);+#10686 = CARTESIAN_POINT('',(1.0708116849E-02,0.1));+#10687 = VECTOR('',#10688,1.);+#10688 = DIRECTION('',(1.,0.));+#10689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10690 = ORIENTED_EDGE('',*,*,#10691,.T.);+#10691 = EDGE_CURVE('',#10669,#10692,#10694,.T.);+#10692 = VERTEX_POINT('',#10693);+#10693 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+ 9.314404469578E-02));+#10694 = SURFACE_CURVE('',#10695,(#10699,#10706),.PCURVE_S1.);+#10695 = LINE('',#10696,#10697);+#10696 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+ 9.314404469578E-02));+#10697 = VECTOR('',#10698,1.);+#10698 = DIRECTION('',(0.,1.,0.));+#10699 = PCURVE('',#8971,#10700);+#10700 = DEFINITIONAL_REPRESENTATION('',(#10701),#10705);+#10701 = LINE('',#10702,#10703);+#10702 = CARTESIAN_POINT('',(0.368584098237,-3.9708744994E-02));+#10703 = VECTOR('',#10704,1.);+#10704 = DIRECTION('',(0.,1.));+#10705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10706 = PCURVE('',#10707,#10712);+#10707 = PLANE('',#10708);+#10708 = AXIS2_PLACEMENT_3D('',#10709,#10710,#10711);+#10709 = CARTESIAN_POINT('',(3.449966791845,0.148391647708,+ 0.193144044696));+#10710 = DIRECTION('',(1.,0.,0.));+#10711 = DIRECTION('',(-0.,1.,0.));+#10712 = DEFINITIONAL_REPRESENTATION('',(#10713),#10717);+#10713 = LINE('',#10714,#10715);+#10714 = CARTESIAN_POINT('',(2.697592268793,-0.1));+#10715 = VECTOR('',#10716,1.);+#10716 = DIRECTION('',(1.,0.));+#10717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10718 = ORIENTED_EDGE('',*,*,#10719,.T.);+#10719 = EDGE_CURVE('',#10692,#8956,#10720,.T.);+#10720 = SURFACE_CURVE('',#10721,(#10725,#10732),.PCURVE_S1.);+#10721 = LINE('',#10722,#10723);+#10722 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+ 9.314404469578E-02));+#10723 = VECTOR('',#10724,1.);+#10724 = DIRECTION('',(1.,0.,0.));+#10725 = PCURVE('',#8971,#10726);+#10726 = DEFINITIONAL_REPRESENTATION('',(#10727),#10731);+#10727 = LINE('',#10728,#10729);+#10728 = CARTESIAN_POINT('',(0.368584098237,4.0291255008E-02));+#10729 = VECTOR('',#10730,1.);+#10730 = DIRECTION('',(1.,0.));+#10731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10732 = PCURVE('',#8999,#10733);+#10733 = DEFINITIONAL_REPRESENTATION('',(#10734),#10738);+#10734 = LINE('',#10735,#10736);+#10735 = CARTESIAN_POINT('',(0.12429188316,0.1));+#10736 = VECTOR('',#10737,1.);+#10737 = DIRECTION('',(-1.,-0.));+#10738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10739 = ORIENTED_EDGE('',*,*,#8955,.T.);+#10740 = ORIENTED_EDGE('',*,*,#10741,.F.);+#10741 = EDGE_CURVE('',#10742,#8933,#10744,.T.);+#10742 = VERTEX_POINT('',#10743);+#10743 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+ 9.314404469578E-02));+#10744 = SURFACE_CURVE('',#10745,(#10749,#10756),.PCURVE_S1.);+#10745 = LINE('',#10746,#10747);+#10746 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+ 9.314404469578E-02));+#10747 = VECTOR('',#10748,1.);+#10748 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#10749 = PCURVE('',#8971,#10750);+#10750 = DEFINITIONAL_REPRESENTATION('',(#10751),#10755);+#10751 = LINE('',#10752,#10753);+#10752 = CARTESIAN_POINT('',(0.343079345819,0.125000000001));+#10753 = VECTOR('',#10754,1.);+#10754 = DIRECTION('',(0.906183139998,-0.422885465325));+#10755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10756 = PCURVE('',#1132,#10757);+#10757 = DEFINITIONAL_REPRESENTATION('',(#10758),#10762);+#10758 = LINE('',#10759,#10760);+#10759 = CARTESIAN_POINT('',(8.276472678267E-02,0.));+#10760 = VECTOR('',#10761,1.);+#10761 = DIRECTION('',(-1.,0.));+#10762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10763 = ORIENTED_EDGE('',*,*,#10764,.T.);+#10764 = EDGE_CURVE('',#10742,#10765,#10767,.T.);+#10765 = VERTEX_POINT('',#10766);+#10766 = CARTESIAN_POINT('',(2.724462046023,3.010692661495,+ 9.314404469578E-02));+#10767 = SURFACE_CURVE('',#10768,(#10772,#10779),.PCURVE_S1.);+#10768 = LINE('',#10769,#10770);+#10769 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,+ 9.314404469578E-02));+#10770 = VECTOR('',#10771,1.);+#10771 = DIRECTION('',(-1.,-4.846916564568E-13,0.));+#10772 = PCURVE('',#8971,#10773);+#10773 = DEFINITIONAL_REPRESENTATION('',(#10774),#10778);+#10774 = LINE('',#10775,#10776);+#10775 = CARTESIAN_POINT('',(0.343079345819,0.125000000001));+#10776 = VECTOR('',#10777,1.);+#10777 = DIRECTION('',(-1.,-4.846916564568E-13));+#10778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10779 = PCURVE('',#1104,#10780);+#10780 = DEFINITIONAL_REPRESENTATION('',(#10781),#10785);+#10781 = LINE('',#10782,#10783);+#10782 = CARTESIAN_POINT('',(0.,0.));+#10783 = VECTOR('',#10784,1.);+#10784 = DIRECTION('',(1.,0.));+#10785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10786 = ORIENTED_EDGE('',*,*,#10787,.F.);+#10787 = EDGE_CURVE('',#10788,#10765,#10790,.T.);+#10788 = VERTEX_POINT('',#10789);+#10789 = CARTESIAN_POINT('',(2.724462045976,2.760692661495,+ 9.314404469578E-02));+#10790 = SURFACE_CURVE('',#10791,(#10796,#10807),.PCURVE_S1.);+#10791 = CIRCLE('',#10792,0.125);+#10792 = AXIS2_PLACEMENT_3D('',#10793,#10794,#10795);+#10793 = CARTESIAN_POINT('',(2.724462046015,2.885692661495,+ 9.314404469578E-02));+#10794 = DIRECTION('',(0.,0.,-1.));+#10795 = DIRECTION('',(-3.070184106946E-10,-1.,-0.));+#10796 = PCURVE('',#8971,#10797);+#10797 = DEFINITIONAL_REPRESENTATION('',(#10798),#10806);+#10798 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10799,#10800,#10801,#10802+ ,#10803,#10804,#10805),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10799 = CARTESIAN_POINT('',(-0.356920647631,-0.125));+#10800 = CARTESIAN_POINT('',(-0.573426998577,-0.124999999934));+#10801 = CARTESIAN_POINT('',(-0.465173823047,6.250000003324E-02));+#10802 = CARTESIAN_POINT('',(-0.356920647516,0.25));+#10803 = CARTESIAN_POINT('',(-0.248667472101,6.249999996676E-02));+#10804 = CARTESIAN_POINT('',(-0.140414296685,-0.125000000066));+#10805 = CARTESIAN_POINT('',(-0.356920647631,-0.125));+#10806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10807 = PCURVE('',#1076,#10808);+#10808 = DEFINITIONAL_REPRESENTATION('',(#10809),#10813);+#10809 = LINE('',#10810,#10811);+#10810 = CARTESIAN_POINT('',(0.,0.));+#10811 = VECTOR('',#10812,1.);+#10812 = DIRECTION('',(1.,0.));+#10813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10814 = ORIENTED_EDGE('',*,*,#10815,.T.);+#10815 = EDGE_CURVE('',#10788,#10816,#10818,.T.);+#10816 = VERTEX_POINT('',#10817);+#10817 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,+ 9.314404469578E-02));+#10818 = SURFACE_CURVE('',#10819,(#10823,#10830),.PCURVE_S1.);+#10819 = LINE('',#10820,#10821);+#10820 = CARTESIAN_POINT('',(2.724462046002,2.760692661498,+ 9.314404469578E-02));+#10821 = VECTOR('',#10822,1.);+#10822 = DIRECTION('',(1.,2.217908417455E-12,0.));+#10823 = PCURVE('',#8971,#10824);+#10824 = DEFINITIONAL_REPRESENTATION('',(#10825),#10829);+#10825 = LINE('',#10826,#10827);+#10826 = CARTESIAN_POINT('',(-0.356920647606,-0.124999999997));+#10827 = VECTOR('',#10828,1.);+#10828 = DIRECTION('',(1.,2.217908417455E-12));+#10829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10830 = PCURVE('',#3666,#10831);+#10831 = DEFINITIONAL_REPRESENTATION('',(#10832),#10836);+#10832 = LINE('',#10833,#10834);+#10833 = CARTESIAN_POINT('',(-0.624999986807,0.));+#10834 = VECTOR('',#10835,1.);+#10835 = DIRECTION('',(1.,0.));+#10836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10837 = ORIENTED_EDGE('',*,*,#10838,.F.);+#10838 = EDGE_CURVE('',#9068,#10816,#10839,.T.);+#10839 = SURFACE_CURVE('',#10840,(#10844,#10851),.PCURVE_S1.);+#10840 = LINE('',#10841,#10842);+#10841 = CARTESIAN_POINT('',(3.5,2.795943709766,9.314404469578E-02));+#10842 = VECTOR('',#10843,1.);+#10843 = DIRECTION('',(-0.906183139998,-0.422885465325,0.));+#10844 = PCURVE('',#8971,#10845);+#10845 = DEFINITIONAL_REPRESENTATION('',(#10846),#10850);+#10846 = LINE('',#10847,#10848);+#10847 = CARTESIAN_POINT('',(0.418617306392,-8.9748951729E-02));+#10848 = VECTOR('',#10849,1.);+#10849 = DIRECTION('',(-0.906183139998,-0.422885465325));+#10850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10851 = PCURVE('',#3640,#10852);+#10852 = DEFINITIONAL_REPRESENTATION('',(#10853),#10857);+#10853 = LINE('',#10854,#10855);+#10854 = CARTESIAN_POINT('',(8.335838225068E-02,0.));+#10855 = VECTOR('',#10856,1.);+#10856 = DIRECTION('',(-1.,0.));+#10857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10858 = ADVANCED_FACE('',(#10859),#9753,.T.);+#10859 = FACE_BOUND('',#10860,.F.);+#10860 = EDGE_LOOP('',(#10861,#10862,#10885,#10906));+#10861 = ORIENTED_EDGE('',*,*,#9739,.F.);+#10862 = ORIENTED_EDGE('',*,*,#10863,.F.);+#10863 = EDGE_CURVE('',#10864,#9712,#10866,.T.);+#10864 = VERTEX_POINT('',#10865);+#10865 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+ 0.193144044696));+#10866 = SURFACE_CURVE('',#10867,(#10871,#10878),.PCURVE_S1.);+#10867 = LINE('',#10868,#10869);+#10868 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+ 0.193144044696));+#10869 = VECTOR('',#10870,1.);+#10870 = DIRECTION('',(1.,0.,0.));+#10871 = PCURVE('',#9753,#10872);+#10872 = DEFINITIONAL_REPRESENTATION('',(#10873),#10877);+#10873 = LINE('',#10874,#10875);+#10874 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#10875 = VECTOR('',#10876,1.);+#10876 = DIRECTION('',(1.,0.));+#10877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10878 = PCURVE('',#9727,#10879);+#10879 = DEFINITIONAL_REPRESENTATION('',(#10880),#10884);+#10880 = LINE('',#10881,#10882);+#10881 = CARTESIAN_POINT('',(0.660870737389,-1.331483192395));+#10882 = VECTOR('',#10883,1.);+#10883 = DIRECTION('',(1.,0.));+#10884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10885 = ORIENTED_EDGE('',*,*,#10886,.T.);+#10886 = EDGE_CURVE('',#10864,#9770,#10887,.T.);+#10887 = SURFACE_CURVE('',#10888,(#10892,#10899),.PCURVE_S1.);+#10888 = LINE('',#10889,#10890);+#10889 = CARTESIAN_POINT('',(3.449966791845,0.395983918053,+ 0.193144044696));+#10890 = VECTOR('',#10891,1.);+#10891 = DIRECTION('',(0.,0.,-1.));+#10892 = PCURVE('',#9753,#10893);+#10893 = DEFINITIONAL_REPRESENTATION('',(#10894),#10898);+#10894 = LINE('',#10895,#10896);+#10895 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#10896 = VECTOR('',#10897,1.);+#10897 = DIRECTION('',(0.,1.));+#10898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10899 = PCURVE('',#9808,#10900);+#10900 = DEFINITIONAL_REPRESENTATION('',(#10901),#10905);+#10901 = LINE('',#10902,#10903);+#10902 = CARTESIAN_POINT('',(0.247592270345,0.));+#10903 = VECTOR('',#10904,1.);+#10904 = DIRECTION('',(0.,-1.));+#10905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10906 = ORIENTED_EDGE('',*,*,#9769,.F.);+#10907 = ADVANCED_FACE('',(#10908),#9727,.F.);+#10908 = FACE_BOUND('',#10909,.F.);+#10909 = EDGE_LOOP('',(#10910,#10911,#10934,#10955));+#10910 = ORIENTED_EDGE('',*,*,#9711,.T.);+#10911 = ORIENTED_EDGE('',*,*,#10912,.F.);+#10912 = EDGE_CURVE('',#10913,#9684,#10915,.T.);+#10913 = VERTEX_POINT('',#10914);+#10914 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+ 0.193144044696));+#10915 = SURFACE_CURVE('',#10916,(#10920,#10927),.PCURVE_S1.);+#10916 = LINE('',#10917,#10918);+#10917 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+ 0.193144044696));+#10918 = VECTOR('',#10919,1.);+#10919 = DIRECTION('',(1.,0.,0.));+#10920 = PCURVE('',#9727,#10921);+#10921 = DEFINITIONAL_REPRESENTATION('',(#10922),#10926);+#10922 = LINE('',#10923,#10924);+#10923 = CARTESIAN_POINT('',(0.660870737389,-1.251483192393));+#10924 = VECTOR('',#10925,1.);+#10925 = DIRECTION('',(1.,0.));+#10926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10927 = PCURVE('',#9699,#10928);+#10928 = DEFINITIONAL_REPRESENTATION('',(#10929),#10933);+#10929 = LINE('',#10930,#10931);+#10930 = CARTESIAN_POINT('',(0.124291879868,0.));+#10931 = VECTOR('',#10932,1.);+#10932 = DIRECTION('',(-1.,-0.));+#10933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10934 = ORIENTED_EDGE('',*,*,#10935,.T.);+#10935 = EDGE_CURVE('',#10913,#10864,#10936,.T.);+#10936 = SURFACE_CURVE('',#10937,(#10941,#10948),.PCURVE_S1.);+#10937 = LINE('',#10938,#10939);+#10938 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+ 0.193144044696));+#10939 = VECTOR('',#10940,1.);+#10940 = DIRECTION('',(0.,-1.,0.));+#10941 = PCURVE('',#9727,#10942);+#10942 = DEFINITIONAL_REPRESENTATION('',(#10943),#10947);+#10943 = LINE('',#10944,#10945);+#10944 = CARTESIAN_POINT('',(0.660870737389,-1.251483192393));+#10945 = VECTOR('',#10946,1.);+#10946 = DIRECTION('',(0.,-1.));+#10947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10948 = PCURVE('',#9808,#10949);+#10949 = DEFINITIONAL_REPRESENTATION('',(#10950),#10954);+#10950 = LINE('',#10951,#10952);+#10951 = CARTESIAN_POINT('',(0.327592270347,0.));+#10952 = VECTOR('',#10953,1.);+#10953 = DIRECTION('',(-1.,0.));+#10954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10955 = ORIENTED_EDGE('',*,*,#10863,.T.);+#10956 = ADVANCED_FACE('',(#10957),#9552,.F.);+#10957 = FACE_BOUND('',#10958,.F.);+#10958 = EDGE_LOOP('',(#10959,#10960,#10983,#11006));+#10959 = ORIENTED_EDGE('',*,*,#9536,.T.);+#10960 = ORIENTED_EDGE('',*,*,#10961,.T.);+#10961 = EDGE_CURVE('',#9509,#10962,#10964,.T.);+#10962 = VERTEX_POINT('',#10963);+#10963 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+ 0.193144044696));+#10964 = SURFACE_CURVE('',#10965,(#10969,#10976),.PCURVE_S1.);+#10965 = LINE('',#10966,#10967);+#10966 = CARTESIAN_POINT('',(3.5,0.975983918052,0.193144044696));+#10967 = VECTOR('',#10968,1.);+#10968 = DIRECTION('',(-1.,0.,0.));+#10969 = PCURVE('',#9552,#10970);+#10970 = DEFINITIONAL_REPRESENTATION('',(#10971),#10975);+#10971 = LINE('',#10972,#10973);+#10972 = CARTESIAN_POINT('',(0.710903945544,-0.751483192396));+#10973 = VECTOR('',#10974,1.);+#10974 = DIRECTION('',(-1.,0.));+#10975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10976 = PCURVE('',#9524,#10977);+#10977 = DEFINITIONAL_REPRESENTATION('',(#10978),#10982);+#10978 = LINE('',#10979,#10980);+#10979 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#10980 = VECTOR('',#10981,1.);+#10981 = DIRECTION('',(1.,0.));+#10982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10983 = ORIENTED_EDGE('',*,*,#10984,.T.);+#10984 = EDGE_CURVE('',#10962,#10985,#10987,.T.);+#10985 = VERTEX_POINT('',#10986);+#10986 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,0.193144044696+ ));+#10987 = SURFACE_CURVE('',#10988,(#10992,#10999),.PCURVE_S1.);+#10988 = LINE('',#10989,#10990);+#10989 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+ 0.193144044696));+#10990 = VECTOR('',#10991,1.);+#10991 = DIRECTION('',(0.,-1.,0.));+#10992 = PCURVE('',#9552,#10993);+#10993 = DEFINITIONAL_REPRESENTATION('',(#10994),#10998);+#10994 = LINE('',#10995,#10996);+#10995 = CARTESIAN_POINT('',(0.660870737389,-0.751483192396));+#10996 = VECTOR('',#10997,1.);+#10997 = DIRECTION('',(0.,-1.));+#10998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10999 = PCURVE('',#9995,#11000);+#11000 = DEFINITIONAL_REPRESENTATION('',(#11001),#11005);+#11001 = LINE('',#11002,#11003);+#11002 = CARTESIAN_POINT('',(0.827592270344,0.));+#11003 = VECTOR('',#11004,1.);+#11004 = DIRECTION('',(-1.,0.));+#11005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11006 = ORIENTED_EDGE('',*,*,#11007,.T.);+#11007 = EDGE_CURVE('',#10985,#9537,#11008,.T.);+#11008 = SURFACE_CURVE('',#11009,(#11013,#11020),.PCURVE_S1.);+#11009 = LINE('',#11010,#11011);+#11010 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,0.193144044696+ ));+#11011 = VECTOR('',#11012,1.);+#11012 = DIRECTION('',(1.,0.,0.));+#11013 = PCURVE('',#9552,#11014);+#11014 = DEFINITIONAL_REPRESENTATION('',(#11015),#11019);+#11015 = LINE('',#11016,#11017);+#11016 = CARTESIAN_POINT('',(0.660870737389,-0.831483192398));+#11017 = VECTOR('',#11018,1.);+#11018 = DIRECTION('',(1.,0.));+#11019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11020 = PCURVE('',#9580,#11021);+#11021 = DEFINITIONAL_REPRESENTATION('',(#11022),#11026);+#11022 = LINE('',#11023,#11024);+#11023 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11024 = VECTOR('',#11025,1.);+#11025 = DIRECTION('',(1.,0.));+#11026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11027 = ADVANCED_FACE('',(#11028),#9377,.F.);+#11028 = FACE_BOUND('',#11029,.F.);+#11029 = EDGE_LOOP('',(#11030,#11031,#11054,#11077));+#11030 = ORIENTED_EDGE('',*,*,#9361,.T.);+#11031 = ORIENTED_EDGE('',*,*,#11032,.T.);+#11032 = EDGE_CURVE('',#9334,#11033,#11035,.T.);+#11033 = VERTEX_POINT('',#11034);+#11034 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,0.193144044696+ ));+#11035 = SURFACE_CURVE('',#11036,(#11040,#11047),.PCURVE_S1.);+#11036 = LINE('',#11037,#11038);+#11037 = CARTESIAN_POINT('',(3.5,1.47598391805,0.193144044696));+#11038 = VECTOR('',#11039,1.);+#11039 = DIRECTION('',(-1.,0.,0.));+#11040 = PCURVE('',#9377,#11041);+#11041 = DEFINITIONAL_REPRESENTATION('',(#11042),#11046);+#11042 = LINE('',#11043,#11044);+#11043 = CARTESIAN_POINT('',(0.710903945544,-0.251483192398));+#11044 = VECTOR('',#11045,1.);+#11045 = DIRECTION('',(-1.,0.));+#11046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11047 = PCURVE('',#9349,#11048);+#11048 = DEFINITIONAL_REPRESENTATION('',(#11049),#11053);+#11049 = LINE('',#11050,#11051);+#11050 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#11051 = VECTOR('',#11052,1.);+#11052 = DIRECTION('',(1.,0.));+#11053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11054 = ORIENTED_EDGE('',*,*,#11055,.T.);+#11055 = EDGE_CURVE('',#11033,#11056,#11058,.T.);+#11056 = VERTEX_POINT('',#11057);+#11057 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+ 0.193144044696));+#11058 = SURFACE_CURVE('',#11059,(#11063,#11070),.PCURVE_S1.);+#11059 = LINE('',#11060,#11061);+#11060 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,0.193144044696+ ));+#11061 = VECTOR('',#11062,1.);+#11062 = DIRECTION('',(0.,-1.,0.));+#11063 = PCURVE('',#9377,#11064);+#11064 = DEFINITIONAL_REPRESENTATION('',(#11065),#11069);+#11065 = LINE('',#11066,#11067);+#11066 = CARTESIAN_POINT('',(0.660870737389,-0.251483192398));+#11067 = VECTOR('',#11068,1.);+#11068 = DIRECTION('',(0.,-1.));+#11069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11070 = PCURVE('',#10182,#11071);+#11071 = DEFINITIONAL_REPRESENTATION('',(#11072),#11076);+#11072 = LINE('',#11073,#11074);+#11073 = CARTESIAN_POINT('',(1.327592270342,0.));+#11074 = VECTOR('',#11075,1.);+#11075 = DIRECTION('',(-1.,0.));+#11076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11077 = ORIENTED_EDGE('',*,*,#11078,.T.);+#11078 = EDGE_CURVE('',#11056,#9362,#11079,.T.);+#11079 = SURFACE_CURVE('',#11080,(#11084,#11091),.PCURVE_S1.);+#11080 = LINE('',#11081,#11082);+#11081 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+ 0.193144044696));+#11082 = VECTOR('',#11083,1.);+#11083 = DIRECTION('',(1.,0.,0.));+#11084 = PCURVE('',#9377,#11085);+#11085 = DEFINITIONAL_REPRESENTATION('',(#11086),#11090);+#11086 = LINE('',#11087,#11088);+#11087 = CARTESIAN_POINT('',(0.660870737389,-0.331483192396));+#11088 = VECTOR('',#11089,1.);+#11089 = DIRECTION('',(1.,0.));+#11090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11091 = PCURVE('',#9405,#11092);+#11092 = DEFINITIONAL_REPRESENTATION('',(#11093),#11097);+#11093 = LINE('',#11094,#11095);+#11094 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11095 = VECTOR('',#11096,1.);+#11096 = DIRECTION('',(1.,0.));+#11097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11098 = ADVANCED_FACE('',(#11099),#9202,.F.);+#11099 = FACE_BOUND('',#11100,.F.);+#11100 = EDGE_LOOP('',(#11101,#11102,#11125,#11148));+#11101 = ORIENTED_EDGE('',*,*,#9186,.T.);+#11102 = ORIENTED_EDGE('',*,*,#11103,.T.);+#11103 = EDGE_CURVE('',#9159,#11104,#11106,.T.);+#11104 = VERTEX_POINT('',#11105);+#11105 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+ 0.193144044696));+#11106 = SURFACE_CURVE('',#11107,(#11111,#11118),.PCURVE_S1.);+#11107 = LINE('',#11108,#11109);+#11108 = CARTESIAN_POINT('',(3.5,1.975983918052,0.193144044696));+#11109 = VECTOR('',#11110,1.);+#11110 = DIRECTION('',(-1.,0.,0.));+#11111 = PCURVE('',#9202,#11112);+#11112 = DEFINITIONAL_REPRESENTATION('',(#11113),#11117);+#11113 = LINE('',#11114,#11115);+#11114 = CARTESIAN_POINT('',(0.710903945544,0.248516807604));+#11115 = VECTOR('',#11116,1.);+#11116 = DIRECTION('',(-1.,0.));+#11117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11118 = PCURVE('',#9174,#11119);+#11119 = DEFINITIONAL_REPRESENTATION('',(#11120),#11124);+#11120 = LINE('',#11121,#11122);+#11121 = CARTESIAN_POINT('',(7.4258671713E-02,0.));+#11122 = VECTOR('',#11123,1.);+#11123 = DIRECTION('',(1.,0.));+#11124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11125 = ORIENTED_EDGE('',*,*,#11126,.T.);+#11126 = EDGE_CURVE('',#11104,#11127,#11129,.T.);+#11127 = VERTEX_POINT('',#11128);+#11128 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+ 0.193144044696));+#11129 = SURFACE_CURVE('',#11130,(#11134,#11141),.PCURVE_S1.);+#11130 = LINE('',#11131,#11132);+#11131 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+ 0.193144044696));+#11132 = VECTOR('',#11133,1.);+#11133 = DIRECTION('',(0.,-1.,0.));+#11134 = PCURVE('',#9202,#11135);+#11135 = DEFINITIONAL_REPRESENTATION('',(#11136),#11140);+#11136 = LINE('',#11137,#11138);+#11137 = CARTESIAN_POINT('',(0.660870737389,0.248516807604));+#11138 = VECTOR('',#11139,1.);+#11139 = DIRECTION('',(0.,-1.));+#11140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11141 = PCURVE('',#10369,#11142);+#11142 = DEFINITIONAL_REPRESENTATION('',(#11143),#11147);+#11143 = LINE('',#11144,#11145);+#11144 = CARTESIAN_POINT('',(1.827592270344,0.));+#11145 = VECTOR('',#11146,1.);+#11146 = DIRECTION('',(-1.,0.));+#11147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11148 = ORIENTED_EDGE('',*,*,#11149,.T.);+#11149 = EDGE_CURVE('',#11127,#9187,#11150,.T.);+#11150 = SURFACE_CURVE('',#11151,(#11155,#11162),.PCURVE_S1.);+#11151 = LINE('',#11152,#11153);+#11152 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+ 0.193144044696));+#11153 = VECTOR('',#11154,1.);+#11154 = DIRECTION('',(1.,0.,0.));+#11155 = PCURVE('',#9202,#11156);+#11156 = DEFINITIONAL_REPRESENTATION('',(#11157),#11161);+#11157 = LINE('',#11158,#11159);+#11158 = CARTESIAN_POINT('',(0.660870737389,0.168516807605));+#11159 = VECTOR('',#11160,1.);+#11160 = DIRECTION('',(1.,0.));+#11161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11162 = PCURVE('',#9230,#11163);+#11163 = DEFINITIONAL_REPRESENTATION('',(#11164),#11168);+#11164 = LINE('',#11165,#11166);+#11165 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11166 = VECTOR('',#11167,1.);+#11167 = DIRECTION('',(1.,0.));+#11168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11169 = ADVANCED_FACE('',(#11170),#9027,.F.);+#11170 = FACE_BOUND('',#11171,.F.);+#11171 = EDGE_LOOP('',(#11172,#11173,#11196,#11219));+#11172 = ORIENTED_EDGE('',*,*,#9011,.T.);+#11173 = ORIENTED_EDGE('',*,*,#11174,.T.);+#11174 = EDGE_CURVE('',#8984,#11175,#11177,.T.);+#11175 = VERTEX_POINT('',#11176);+#11176 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+ 0.193144044696));+#11177 = SURFACE_CURVE('',#11178,(#11182,#11189),.PCURVE_S1.);+#11178 = LINE('',#11179,#11180);+#11179 = CARTESIAN_POINT('',(3.5,2.925983916503,0.193144044696));+#11180 = VECTOR('',#11181,1.);+#11181 = DIRECTION('',(-1.,0.,0.));+#11182 = PCURVE('',#9027,#11183);+#11183 = DEFINITIONAL_REPRESENTATION('',(#11184),#11188);+#11184 = LINE('',#11185,#11186);+#11185 = CARTESIAN_POINT('',(0.710903945544,1.198516806055));+#11186 = VECTOR('',#11187,1.);+#11187 = DIRECTION('',(-1.,0.));+#11188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11189 = PCURVE('',#8999,#11190);+#11190 = DEFINITIONAL_REPRESENTATION('',(#11191),#11195);+#11191 = LINE('',#11192,#11193);+#11192 = CARTESIAN_POINT('',(7.4258675005E-02,0.));+#11193 = VECTOR('',#11194,1.);+#11194 = DIRECTION('',(1.,0.));+#11195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11196 = ORIENTED_EDGE('',*,*,#11197,.T.);+#11197 = EDGE_CURVE('',#11175,#11198,#11200,.T.);+#11198 = VERTEX_POINT('',#11199);+#11199 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+ 0.193144044696));+#11200 = SURFACE_CURVE('',#11201,(#11205,#11212),.PCURVE_S1.);+#11201 = LINE('',#11202,#11203);+#11202 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+ 0.193144044696));+#11203 = VECTOR('',#11204,1.);+#11204 = DIRECTION('',(0.,-1.,0.));+#11205 = PCURVE('',#9027,#11206);+#11206 = DEFINITIONAL_REPRESENTATION('',(#11207),#11211);+#11207 = LINE('',#11208,#11209);+#11208 = CARTESIAN_POINT('',(0.660870737389,1.198516806055));+#11209 = VECTOR('',#11210,1.);+#11210 = DIRECTION('',(0.,-1.));+#11211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11212 = PCURVE('',#10707,#11213);+#11213 = DEFINITIONAL_REPRESENTATION('',(#11214),#11218);+#11214 = LINE('',#11215,#11216);+#11215 = CARTESIAN_POINT('',(2.777592268795,0.));+#11216 = VECTOR('',#11217,1.);+#11217 = DIRECTION('',(-1.,0.));+#11218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11219 = ORIENTED_EDGE('',*,*,#11220,.T.);+#11220 = EDGE_CURVE('',#11198,#9012,#11221,.T.);+#11221 = SURFACE_CURVE('',#11222,(#11226,#11233),.PCURVE_S1.);+#11222 = LINE('',#11223,#11224);+#11223 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+ 0.193144044696));+#11224 = VECTOR('',#11225,1.);+#11225 = DIRECTION('',(1.,0.,0.));+#11226 = PCURVE('',#9027,#11227);+#11227 = DEFINITIONAL_REPRESENTATION('',(#11228),#11232);+#11228 = LINE('',#11229,#11230);+#11229 = CARTESIAN_POINT('',(0.660870737389,1.118516806053));+#11230 = VECTOR('',#11231,1.);+#11231 = DIRECTION('',(1.,0.));+#11232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11233 = PCURVE('',#9055,#11234);+#11234 = DEFINITIONAL_REPRESENTATION('',(#11235),#11239);+#11235 = LINE('',#11236,#11237);+#11236 = CARTESIAN_POINT('',(1.0708116849E-02,0.));+#11237 = VECTOR('',#11238,1.);+#11238 = DIRECTION('',(1.,0.));+#11239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11240 = ADVANCED_FACE('',(#11241),#443,.F.);+#11241 = FACE_BOUND('',#11242,.F.);+#11242 = EDGE_LOOP('',(#11243,#11244,#11267,#11295,#11323,#11351,#11379,+ #11407));+#11243 = ORIENTED_EDGE('',*,*,#425,.F.);+#11244 = ORIENTED_EDGE('',*,*,#11245,.F.);+#11245 = EDGE_CURVE('',#11246,#426,#11248,.T.);+#11246 = VERTEX_POINT('',#11247);+#11247 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+ 0.193144044696));+#11248 = SURFACE_CURVE('',#11249,(#11253,#11260),.PCURVE_S1.);+#11249 = LINE('',#11250,#11251);+#11250 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+ 0.193144044696));+#11251 = VECTOR('',#11252,1.);+#11252 = DIRECTION('',(0.,-1.,0.));+#11253 = PCURVE('',#443,#11254);+#11254 = DEFINITIONAL_REPRESENTATION('',(#11255),#11259);+#11255 = LINE('',#11256,#11257);+#11256 = CARTESIAN_POINT('',(-0.349634015048,-1.716774448945));+#11257 = VECTOR('',#11258,1.);+#11258 = DIRECTION('',(0.,-1.));+#11259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11260 = PCURVE('',#525,#11261);+#11261 = DEFINITIONAL_REPRESENTATION('',(#11262),#11266);+#11262 = LINE('',#11263,#11264);+#11263 = CARTESIAN_POINT('',(2.50000000051E-02,0.1));+#11264 = VECTOR('',#11265,1.);+#11265 = DIRECTION('',(-1.,0.));+#11266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11267 = ORIENTED_EDGE('',*,*,#11268,.T.);+#11268 = EDGE_CURVE('',#11246,#11269,#11271,.T.);+#11269 = VERTEX_POINT('',#11270);+#11270 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+ 0.193144044696));+#11271 = SURFACE_CURVE('',#11272,(#11276,#11283),.PCURVE_S1.);+#11272 = LINE('',#11273,#11274);+#11273 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+ 0.193144044696));+#11274 = VECTOR('',#11275,1.);+#11275 = DIRECTION('',(0.500000000069,0.866025403744,0.));+#11276 = PCURVE('',#443,#11277);+#11277 = DEFINITIONAL_REPRESENTATION('',(#11278),#11282);+#11278 = LINE('',#11279,#11280);+#11279 = CARTESIAN_POINT('',(-0.349634015048,-1.716774448945));+#11280 = VECTOR('',#11281,1.);+#11281 = DIRECTION('',(0.500000000069,0.866025403744));+#11282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11283 = PCURVE('',#11284,#11289);+#11284 = PLANE('',#11285);+#11285 = AXIS2_PLACEMENT_3D('',#11286,#11287,#11288);+#11286 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+ 9.314404469578E-02));+#11287 = DIRECTION('',(0.866025403744,-0.500000000069,0.));+#11288 = DIRECTION('',(0.500000000069,0.866025403744,0.));+#11289 = DEFINITIONAL_REPRESENTATION('',(#11290),#11294);+#11290 = LINE('',#11291,#11292);+#11291 = CARTESIAN_POINT('',(0.,0.1));+#11292 = VECTOR('',#11293,1.);+#11293 = DIRECTION('',(1.,0.));+#11294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11295 = ORIENTED_EDGE('',*,*,#11296,.F.);+#11296 = EDGE_CURVE('',#11297,#11269,#11299,.T.);+#11297 = VERTEX_POINT('',#11298);+#11298 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+ 0.193144044696));+#11299 = SURFACE_CURVE('',#11300,(#11304,#11311),.PCURVE_S1.);+#11300 = LINE('',#11301,#11302);+#11301 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+ 0.193144044696));+#11302 = VECTOR('',#11303,1.);+#11303 = DIRECTION('',(0.,-1.,0.));+#11304 = PCURVE('',#443,#11305);+#11305 = DEFINITIONAL_REPRESENTATION('',(#11306),#11310);+#11306 = LINE('',#11307,#11308);+#11307 = CARTESIAN_POINT('',(-0.314634015041,-1.57907546274));+#11308 = VECTOR('',#11309,1.);+#11309 = DIRECTION('',(0.,-1.));+#11310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11311 = PCURVE('',#11312,#11317);+#11312 = PLANE('',#11313);+#11313 = AXIS2_PLACEMENT_3D('',#11314,#11315,#11316);+#11314 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+ 9.314404469578E-02));+#11315 = DIRECTION('',(1.,0.,0.));+#11316 = DIRECTION('',(-0.,1.,0.));+#11317 = DEFINITIONAL_REPRESENTATION('',(#11318),#11322);+#11318 = LINE('',#11319,#11320);+#11319 = CARTESIAN_POINT('',(7.707720793884E-02,0.1));+#11320 = VECTOR('',#11321,1.);+#11321 = DIRECTION('',(-1.,0.));+#11322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11323 = ORIENTED_EDGE('',*,*,#11324,.F.);+#11324 = EDGE_CURVE('',#11325,#11297,#11327,.T.);+#11325 = VERTEX_POINT('',#11326);+#11326 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+ 0.193144044696));+#11327 = SURFACE_CURVE('',#11328,(#11332,#11339),.PCURVE_S1.);+#11328 = LINE('',#11329,#11330);+#11329 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+ 0.193144044696));+#11330 = VECTOR('',#11331,1.);+#11331 = DIRECTION('',(1.,0.,0.));+#11332 = PCURVE('',#443,#11333);+#11333 = DEFINITIONAL_REPRESENTATION('',(#11334),#11338);+#11334 = LINE('',#11335,#11336);+#11335 = CARTESIAN_POINT('',(-0.589634015042,-1.57907546274));+#11336 = VECTOR('',#11337,1.);+#11337 = DIRECTION('',(1.,0.));+#11338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11339 = PCURVE('',#11340,#11345);+#11340 = PLANE('',#11341);+#11341 = AXIS2_PLACEMENT_3D('',#11342,#11343,#11344);+#11342 = CARTESIAN_POINT('',(1.822021177074,0.148391647708,+ 0.193144044696));+#11343 = DIRECTION('',(0.,-1.,0.));+#11344 = DIRECTION('',(1.,0.,0.));+#11345 = DEFINITIONAL_REPRESENTATION('',(#11346),#11350);+#11346 = LINE('',#11347,#11348);+#11347 = CARTESIAN_POINT('',(0.37744086234,0.));+#11348 = VECTOR('',#11349,1.);+#11349 = DIRECTION('',(1.,0.));+#11350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11351 = ORIENTED_EDGE('',*,*,#11352,.F.);+#11352 = EDGE_CURVE('',#11353,#11325,#11355,.T.);+#11353 = VERTEX_POINT('',#11354);+#11354 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+ 0.193144044696));+#11355 = SURFACE_CURVE('',#11356,(#11360,#11367),.PCURVE_S1.);+#11356 = LINE('',#11357,#11358);+#11357 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+ 0.193144044696));+#11358 = VECTOR('',#11359,1.);+#11359 = DIRECTION('',(0.,1.,0.));+#11360 = PCURVE('',#443,#11361);+#11361 = DEFINITIONAL_REPRESENTATION('',(#11362),#11366);+#11362 = LINE('',#11363,#11364);+#11363 = CARTESIAN_POINT('',(-0.589634015042,-1.656152670733));+#11364 = VECTOR('',#11365,1.);+#11365 = DIRECTION('',(0.,1.));+#11366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11367 = PCURVE('',#11368,#11373);+#11368 = PLANE('',#11369);+#11369 = AXIS2_PLACEMENT_3D('',#11370,#11371,#11372);+#11370 = CARTESIAN_POINT('',(2.199462039414,0.160692661497,+ 9.314404469578E-02));+#11371 = DIRECTION('',(-1.,0.,0.));+#11372 = DIRECTION('',(0.,-1.,0.));+#11373 = DEFINITIONAL_REPRESENTATION('',(#11374),#11378);+#11374 = LINE('',#11375,#11376);+#11375 = CARTESIAN_POINT('',(8.93782217824E-02,0.1));+#11376 = VECTOR('',#11377,1.);+#11377 = DIRECTION('',(-1.,0.));+#11378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11379 = ORIENTED_EDGE('',*,*,#11380,.T.);+#11380 = EDGE_CURVE('',#11353,#11381,#11383,.T.);+#11381 = VERTEX_POINT('',#11382);+#11382 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+ 0.193144044696));+#11383 = SURFACE_CURVE('',#11384,(#11388,#11395),.PCURVE_S1.);+#11384 = LINE('',#11385,#11386);+#11385 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+ 0.193144044696));+#11386 = VECTOR('',#11387,1.);+#11387 = DIRECTION('',(0.50000000009,-0.866025403732,0.));+#11388 = PCURVE('',#443,#11389);+#11389 = DEFINITIONAL_REPRESENTATION('',(#11390),#11394);+#11390 = LINE('',#11391,#11392);+#11391 = CARTESIAN_POINT('',(-0.589634015042,-1.656152670733));+#11392 = VECTOR('',#11393,1.);+#11393 = DIRECTION('',(0.50000000009,-0.866025403732));+#11394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11395 = PCURVE('',#11396,#11401);+#11396 = PLANE('',#11397);+#11397 = AXIS2_PLACEMENT_3D('',#11398,#11399,#11400);+#11398 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+ 9.314404469578E-02));+#11399 = DIRECTION('',(-0.866025403732,-0.50000000009,0.));+#11400 = DIRECTION('',(0.50000000009,-0.866025403732,0.));+#11401 = DEFINITIONAL_REPRESENTATION('',(#11402),#11406);+#11402 = LINE('',#11403,#11404);+#11403 = CARTESIAN_POINT('',(0.,0.1));+#11404 = VECTOR('',#11405,1.);+#11405 = DIRECTION('',(1.,0.));+#11406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11407 = ORIENTED_EDGE('',*,*,#11408,.F.);+#11408 = EDGE_CURVE('',#428,#11381,#11409,.T.);+#11409 = SURFACE_CURVE('',#11410,(#11414,#11421),.PCURVE_S1.);+#11410 = LINE('',#11411,#11412);+#11411 = CARTESIAN_POINT('',(2.239462039422,0.,0.193144044696));+#11412 = VECTOR('',#11413,1.);+#11413 = DIRECTION('',(0.,1.,-1.365650185035E-14));+#11414 = PCURVE('',#443,#11415);+#11415 = DEFINITIONAL_REPRESENTATION('',(#11416),#11420);+#11416 = LINE('',#11417,#11418);+#11417 = CARTESIAN_POINT('',(-0.549634015034,-1.727467110448));+#11418 = VECTOR('',#11419,1.);+#11419 = DIRECTION('',(0.,1.));+#11420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11421 = PCURVE('',#471,#11422);+#11422 = DEFINITIONAL_REPRESENTATION('',(#11423),#11427);+#11423 = LINE('',#11424,#11425);+#11424 = CARTESIAN_POINT('',(2.032407414415E-03,0.1));+#11425 = VECTOR('',#11426,1.);+#11426 = DIRECTION('',(-1.,-1.365650185035E-14));+#11427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11428 = ADVANCED_FACE('',(#11429),#9699,.T.);+#11429 = FACE_BOUND('',#11430,.F.);+#11430 = EDGE_LOOP('',(#11431,#11432,#11433,#11454));+#11431 = ORIENTED_EDGE('',*,*,#9683,.T.);+#11432 = ORIENTED_EDGE('',*,*,#9820,.F.);+#11433 = ORIENTED_EDGE('',*,*,#11434,.F.);+#11434 = EDGE_CURVE('',#10913,#9793,#11435,.T.);+#11435 = SURFACE_CURVE('',#11436,(#11440,#11447),.PCURVE_S1.);+#11436 = LINE('',#11437,#11438);+#11437 = CARTESIAN_POINT('',(3.449966791845,0.475983918055,+ 0.193144044696));+#11438 = VECTOR('',#11439,1.);+#11439 = DIRECTION('',(0.,0.,-1.));+#11440 = PCURVE('',#9699,#11441);+#11441 = DEFINITIONAL_REPRESENTATION('',(#11442),#11446);+#11442 = LINE('',#11443,#11444);+#11443 = CARTESIAN_POINT('',(0.124291879868,0.));+#11444 = VECTOR('',#11445,1.);+#11445 = DIRECTION('',(0.,1.));+#11446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11447 = PCURVE('',#9808,#11448);+#11448 = DEFINITIONAL_REPRESENTATION('',(#11449),#11453);+#11449 = LINE('',#11450,#11451);+#11450 = CARTESIAN_POINT('',(0.327592270347,0.));+#11451 = VECTOR('',#11452,1.);+#11452 = DIRECTION('',(0.,-1.));+#11453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11454 = ORIENTED_EDGE('',*,*,#10912,.T.);+#11455 = ADVANCED_FACE('',(#11456),#9995,.T.);+#11456 = FACE_BOUND('',#11457,.F.);+#11457 = EDGE_LOOP('',(#11458,#11479,#11480,#11501));+#11458 = ORIENTED_EDGE('',*,*,#11459,.F.);+#11459 = EDGE_CURVE('',#10985,#9957,#11460,.T.);+#11460 = SURFACE_CURVE('',#11461,(#11465,#11472),.PCURVE_S1.);+#11461 = LINE('',#11462,#11463);+#11462 = CARTESIAN_POINT('',(3.449966791845,0.89598391805,0.193144044696+ ));+#11463 = VECTOR('',#11464,1.);+#11464 = DIRECTION('',(0.,0.,-1.));+#11465 = PCURVE('',#9995,#11466);+#11466 = DEFINITIONAL_REPRESENTATION('',(#11467),#11471);+#11467 = LINE('',#11468,#11469);+#11468 = CARTESIAN_POINT('',(0.747592270342,0.));+#11469 = VECTOR('',#11470,1.);+#11470 = DIRECTION('',(0.,-1.));+#11471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11472 = PCURVE('',#9580,#11473);+#11473 = DEFINITIONAL_REPRESENTATION('',(#11474),#11478);+#11474 = LINE('',#11475,#11476);+#11475 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11476 = VECTOR('',#11477,1.);+#11477 = DIRECTION('',(0.,1.));+#11478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11479 = ORIENTED_EDGE('',*,*,#10984,.F.);+#11480 = ORIENTED_EDGE('',*,*,#11481,.T.);+#11481 = EDGE_CURVE('',#10962,#9980,#11482,.T.);+#11482 = SURFACE_CURVE('',#11483,(#11487,#11494),.PCURVE_S1.);+#11483 = LINE('',#11484,#11485);+#11484 = CARTESIAN_POINT('',(3.449966791845,0.975983918052,+ 0.193144044696));+#11485 = VECTOR('',#11486,1.);+#11486 = DIRECTION('',(0.,0.,-1.));+#11487 = PCURVE('',#9995,#11488);+#11488 = DEFINITIONAL_REPRESENTATION('',(#11489),#11493);+#11489 = LINE('',#11490,#11491);+#11490 = CARTESIAN_POINT('',(0.827592270344,0.));+#11491 = VECTOR('',#11492,1.);+#11492 = DIRECTION('',(0.,-1.));+#11493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11494 = PCURVE('',#9524,#11495);+#11495 = DEFINITIONAL_REPRESENTATION('',(#11496),#11500);+#11496 = LINE('',#11497,#11498);+#11497 = CARTESIAN_POINT('',(0.124291879868,0.));+#11498 = VECTOR('',#11499,1.);+#11499 = DIRECTION('',(0.,1.));+#11500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11501 = ORIENTED_EDGE('',*,*,#9979,.F.);+#11502 = ADVANCED_FACE('',(#11503),#10369,.T.);+#11503 = FACE_BOUND('',#11504,.F.);+#11504 = EDGE_LOOP('',(#11505,#11526,#11527,#11548));+#11505 = ORIENTED_EDGE('',*,*,#11506,.F.);+#11506 = EDGE_CURVE('',#11127,#10331,#11507,.T.);+#11507 = SURFACE_CURVE('',#11508,(#11512,#11519),.PCURVE_S1.);+#11508 = LINE('',#11509,#11510);+#11509 = CARTESIAN_POINT('',(3.449966791845,1.895983918053,+ 0.193144044696));+#11510 = VECTOR('',#11511,1.);+#11511 = DIRECTION('',(0.,0.,-1.));+#11512 = PCURVE('',#10369,#11513);+#11513 = DEFINITIONAL_REPRESENTATION('',(#11514),#11518);+#11514 = LINE('',#11515,#11516);+#11515 = CARTESIAN_POINT('',(1.747592270345,0.));+#11516 = VECTOR('',#11517,1.);+#11517 = DIRECTION('',(0.,-1.));+#11518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11519 = PCURVE('',#9230,#11520);+#11520 = DEFINITIONAL_REPRESENTATION('',(#11521),#11525);+#11521 = LINE('',#11522,#11523);+#11522 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11523 = VECTOR('',#11524,1.);+#11524 = DIRECTION('',(0.,1.));+#11525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11526 = ORIENTED_EDGE('',*,*,#11126,.F.);+#11527 = ORIENTED_EDGE('',*,*,#11528,.T.);+#11528 = EDGE_CURVE('',#11104,#10354,#11529,.T.);+#11529 = SURFACE_CURVE('',#11530,(#11534,#11541),.PCURVE_S1.);+#11530 = LINE('',#11531,#11532);+#11531 = CARTESIAN_POINT('',(3.449966791845,1.975983918052,+ 0.193144044696));+#11532 = VECTOR('',#11533,1.);+#11533 = DIRECTION('',(0.,0.,-1.));+#11534 = PCURVE('',#10369,#11535);+#11535 = DEFINITIONAL_REPRESENTATION('',(#11536),#11540);+#11536 = LINE('',#11537,#11538);+#11537 = CARTESIAN_POINT('',(1.827592270344,0.));+#11538 = VECTOR('',#11539,1.);+#11539 = DIRECTION('',(0.,-1.));+#11540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11541 = PCURVE('',#9174,#11542);+#11542 = DEFINITIONAL_REPRESENTATION('',(#11543),#11547);+#11543 = LINE('',#11544,#11545);+#11544 = CARTESIAN_POINT('',(0.124291879868,0.));+#11545 = VECTOR('',#11546,1.);+#11546 = DIRECTION('',(0.,1.));+#11547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11548 = ORIENTED_EDGE('',*,*,#10353,.F.);+#11549 = ADVANCED_FACE('',(#11550),#10707,.T.);+#11550 = FACE_BOUND('',#11551,.F.);+#11551 = EDGE_LOOP('',(#11552,#11573,#11574,#11595));+#11552 = ORIENTED_EDGE('',*,*,#11553,.T.);+#11553 = EDGE_CURVE('',#11175,#10692,#11554,.T.);+#11554 = SURFACE_CURVE('',#11555,(#11559,#11566),.PCURVE_S1.);+#11555 = LINE('',#11556,#11557);+#11556 = CARTESIAN_POINT('',(3.449966791845,2.925983916503,+ 0.193144044696));+#11557 = VECTOR('',#11558,1.);+#11558 = DIRECTION('',(0.,0.,-1.));+#11559 = PCURVE('',#10707,#11560);+#11560 = DEFINITIONAL_REPRESENTATION('',(#11561),#11565);+#11561 = LINE('',#11562,#11563);+#11562 = CARTESIAN_POINT('',(2.777592268795,0.));+#11563 = VECTOR('',#11564,1.);+#11564 = DIRECTION('',(0.,-1.));+#11565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11566 = PCURVE('',#8999,#11567);+#11567 = DEFINITIONAL_REPRESENTATION('',(#11568),#11572);+#11568 = LINE('',#11569,#11570);+#11569 = CARTESIAN_POINT('',(0.12429188316,0.));+#11570 = VECTOR('',#11571,1.);+#11571 = DIRECTION('',(0.,1.));+#11572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11573 = ORIENTED_EDGE('',*,*,#10691,.F.);+#11574 = ORIENTED_EDGE('',*,*,#11575,.F.);+#11575 = EDGE_CURVE('',#11198,#10669,#11576,.T.);+#11576 = SURFACE_CURVE('',#11577,(#11581,#11588),.PCURVE_S1.);+#11577 = LINE('',#11578,#11579);+#11578 = CARTESIAN_POINT('',(3.449966791845,2.845983916501,+ 0.193144044696));+#11579 = VECTOR('',#11580,1.);+#11580 = DIRECTION('',(0.,0.,-1.));+#11581 = PCURVE('',#10707,#11582);+#11582 = DEFINITIONAL_REPRESENTATION('',(#11583),#11587);+#11583 = LINE('',#11584,#11585);+#11584 = CARTESIAN_POINT('',(2.697592268793,0.));+#11585 = VECTOR('',#11586,1.);+#11586 = DIRECTION('',(0.,-1.));+#11587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11588 = PCURVE('',#9055,#11589);+#11589 = DEFINITIONAL_REPRESENTATION('',(#11590),#11594);+#11590 = LINE('',#11591,#11592);+#11591 = CARTESIAN_POINT('',(1.0708116849E-02,0.));+#11592 = VECTOR('',#11593,1.);+#11593 = DIRECTION('',(0.,1.));+#11594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11595 = ORIENTED_EDGE('',*,*,#11197,.F.);+#11596 = ADVANCED_FACE('',(#11597),#10182,.T.);+#11597 = FACE_BOUND('',#11598,.F.);+#11598 = EDGE_LOOP('',(#11599,#11620,#11621,#11642));+#11599 = ORIENTED_EDGE('',*,*,#11600,.T.);+#11600 = EDGE_CURVE('',#11033,#10167,#11601,.T.);+#11601 = SURFACE_CURVE('',#11602,(#11606,#11613),.PCURVE_S1.);+#11602 = LINE('',#11603,#11604);+#11603 = CARTESIAN_POINT('',(3.449966791845,1.47598391805,0.193144044696+ ));+#11604 = VECTOR('',#11605,1.);+#11605 = DIRECTION('',(0.,0.,-1.));+#11606 = PCURVE('',#10182,#11607);+#11607 = DEFINITIONAL_REPRESENTATION('',(#11608),#11612);+#11608 = LINE('',#11609,#11610);+#11609 = CARTESIAN_POINT('',(1.327592270342,0.));+#11610 = VECTOR('',#11611,1.);+#11611 = DIRECTION('',(0.,-1.));+#11612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11613 = PCURVE('',#9349,#11614);+#11614 = DEFINITIONAL_REPRESENTATION('',(#11615),#11619);+#11615 = LINE('',#11616,#11617);+#11616 = CARTESIAN_POINT('',(0.124291879868,0.));+#11617 = VECTOR('',#11618,1.);+#11618 = DIRECTION('',(0.,1.));+#11619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11620 = ORIENTED_EDGE('',*,*,#10166,.F.);+#11621 = ORIENTED_EDGE('',*,*,#11622,.F.);+#11622 = EDGE_CURVE('',#11056,#10144,#11623,.T.);+#11623 = SURFACE_CURVE('',#11624,(#11628,#11635),.PCURVE_S1.);+#11624 = LINE('',#11625,#11626);+#11625 = CARTESIAN_POINT('',(3.449966791845,1.395983918052,+ 0.193144044696));+#11626 = VECTOR('',#11627,1.);+#11627 = DIRECTION('',(0.,0.,-1.));+#11628 = PCURVE('',#10182,#11629);+#11629 = DEFINITIONAL_REPRESENTATION('',(#11630),#11634);+#11630 = LINE('',#11631,#11632);+#11631 = CARTESIAN_POINT('',(1.247592270344,0.));+#11632 = VECTOR('',#11633,1.);+#11633 = DIRECTION('',(0.,-1.));+#11634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11635 = PCURVE('',#9405,#11636);+#11636 = DEFINITIONAL_REPRESENTATION('',(#11637),#11641);+#11637 = LINE('',#11638,#11639);+#11638 = CARTESIAN_POINT('',(1.0708120141E-02,0.));+#11639 = VECTOR('',#11640,1.);+#11640 = DIRECTION('',(0.,1.));+#11641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11642 = ORIENTED_EDGE('',*,*,#11055,.F.);+#11643 = ADVANCED_FACE('',(#11644),#9808,.T.);+#11644 = FACE_BOUND('',#11645,.F.);+#11645 = EDGE_LOOP('',(#11646,#11647,#11648,#11649));+#11646 = ORIENTED_EDGE('',*,*,#11434,.T.);+#11647 = ORIENTED_EDGE('',*,*,#9792,.F.);+#11648 = ORIENTED_EDGE('',*,*,#10886,.F.);+#11649 = ORIENTED_EDGE('',*,*,#10935,.F.);+#11650 = ADVANCED_FACE('',(#11651),#9580,.T.);+#11651 = FACE_BOUND('',#11652,.F.);+#11652 = EDGE_LOOP('',(#11653,#11654,#11655,#11656));+#11653 = ORIENTED_EDGE('',*,*,#9564,.F.);+#11654 = ORIENTED_EDGE('',*,*,#11007,.F.);+#11655 = ORIENTED_EDGE('',*,*,#11459,.T.);+#11656 = ORIENTED_EDGE('',*,*,#9956,.F.);+#11657 = ADVANCED_FACE('',(#11658),#9524,.T.);+#11658 = FACE_BOUND('',#11659,.F.);+#11659 = EDGE_LOOP('',(#11660,#11661,#11662,#11663));+#11660 = ORIENTED_EDGE('',*,*,#9508,.T.);+#11661 = ORIENTED_EDGE('',*,*,#10007,.F.);+#11662 = ORIENTED_EDGE('',*,*,#11481,.F.);+#11663 = ORIENTED_EDGE('',*,*,#10961,.F.);+#11664 = ADVANCED_FACE('',(#11665),#9230,.T.);+#11665 = FACE_BOUND('',#11666,.F.);+#11666 = EDGE_LOOP('',(#11667,#11668,#11669,#11670));+#11667 = ORIENTED_EDGE('',*,*,#9214,.F.);+#11668 = ORIENTED_EDGE('',*,*,#11149,.F.);+#11669 = ORIENTED_EDGE('',*,*,#11506,.T.);+#11670 = ORIENTED_EDGE('',*,*,#10330,.F.);+#11671 = ADVANCED_FACE('',(#11672),#9174,.T.);+#11672 = FACE_BOUND('',#11673,.F.);+#11673 = EDGE_LOOP('',(#11674,#11675,#11676,#11677));+#11674 = ORIENTED_EDGE('',*,*,#9158,.T.);+#11675 = ORIENTED_EDGE('',*,*,#10381,.F.);+#11676 = ORIENTED_EDGE('',*,*,#11528,.F.);+#11677 = ORIENTED_EDGE('',*,*,#11103,.F.);+#11678 = ADVANCED_FACE('',(#11679),#8999,.T.);+#11679 = FACE_BOUND('',#11680,.F.);+#11680 = EDGE_LOOP('',(#11681,#11682,#11683,#11684));+#11681 = ORIENTED_EDGE('',*,*,#8983,.T.);+#11682 = ORIENTED_EDGE('',*,*,#10719,.F.);+#11683 = ORIENTED_EDGE('',*,*,#11553,.F.);+#11684 = ORIENTED_EDGE('',*,*,#11174,.F.);+#11685 = ADVANCED_FACE('',(#11686),#9055,.T.);+#11686 = FACE_BOUND('',#11687,.F.);+#11687 = EDGE_LOOP('',(#11688,#11689,#11690,#11691));+#11688 = ORIENTED_EDGE('',*,*,#9039,.F.);+#11689 = ORIENTED_EDGE('',*,*,#11220,.F.);+#11690 = ORIENTED_EDGE('',*,*,#11575,.T.);+#11691 = ORIENTED_EDGE('',*,*,#10668,.T.);+#11692 = ADVANCED_FACE('',(#11693),#9349,.T.);+#11693 = FACE_BOUND('',#11694,.F.);+#11694 = EDGE_LOOP('',(#11695,#11696,#11697,#11698));+#11695 = ORIENTED_EDGE('',*,*,#9333,.T.);+#11696 = ORIENTED_EDGE('',*,*,#10194,.F.);+#11697 = ORIENTED_EDGE('',*,*,#11600,.F.);+#11698 = ORIENTED_EDGE('',*,*,#11032,.F.);+#11699 = ADVANCED_FACE('',(#11700),#9405,.T.);+#11700 = FACE_BOUND('',#11701,.F.);+#11701 = EDGE_LOOP('',(#11702,#11703,#11704,#11705));+#11702 = ORIENTED_EDGE('',*,*,#9389,.F.);+#11703 = ORIENTED_EDGE('',*,*,#11078,.F.);+#11704 = ORIENTED_EDGE('',*,*,#11622,.T.);+#11705 = ORIENTED_EDGE('',*,*,#10143,.T.);+#11706 = ADVANCED_FACE('',(#11707),#525,.F.);+#11707 = FACE_BOUND('',#11708,.F.);+#11708 = EDGE_LOOP('',(#11709,#11710,#11733,#11754));+#11709 = ORIENTED_EDGE('',*,*,#511,.F.);+#11710 = ORIENTED_EDGE('',*,*,#11711,.T.);+#11711 = EDGE_CURVE('',#484,#11712,#11714,.T.);+#11712 = VERTEX_POINT('',#11713);+#11713 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+ 9.314404469578E-02));+#11714 = SURFACE_CURVE('',#11715,(#11719,#11726),.PCURVE_S1.);+#11715 = LINE('',#11716,#11717);+#11716 = CARTESIAN_POINT('',(2.439462039408,0.,9.314404469578E-02));+#11717 = VECTOR('',#11718,1.);+#11718 = DIRECTION('',(0.,1.,0.));+#11719 = PCURVE('',#525,#11720);+#11720 = DEFINITIONAL_REPRESENTATION('',(#11721),#11725);+#11721 = LINE('',#11722,#11723);+#11722 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#11723 = VECTOR('',#11724,1.);+#11724 = DIRECTION('',(1.,0.));+#11725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11726 = PCURVE('',#499,#11727);+#11727 = DEFINITIONAL_REPRESENTATION('',(#11728),#11732);+#11728 = LINE('',#11729,#11730);+#11729 = CARTESIAN_POINT('',(-0.349634015048,-1.727467110448));+#11730 = VECTOR('',#11731,1.);+#11731 = DIRECTION('',(0.,1.));+#11732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11733 = ORIENTED_EDGE('',*,*,#11734,.F.);+#11734 = EDGE_CURVE('',#11246,#11712,#11735,.T.);+#11735 = SURFACE_CURVE('',#11736,(#11740,#11747),.PCURVE_S1.);+#11736 = LINE('',#11737,#11738);+#11737 = CARTESIAN_POINT('',(2.439462039408,1.06926615031E-02,+ 0.193144044696));+#11738 = VECTOR('',#11739,1.);+#11739 = DIRECTION('',(0.,0.,-1.));+#11740 = PCURVE('',#525,#11741);+#11741 = DEFINITIONAL_REPRESENTATION('',(#11742),#11746);+#11742 = LINE('',#11743,#11744);+#11743 = CARTESIAN_POINT('',(2.50000000051E-02,0.1));+#11744 = VECTOR('',#11745,1.);+#11745 = DIRECTION('',(0.,-1.));+#11746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11747 = PCURVE('',#11284,#11748);+#11748 = DEFINITIONAL_REPRESENTATION('',(#11749),#11753);+#11749 = LINE('',#11750,#11751);+#11750 = CARTESIAN_POINT('',(0.,0.1));+#11751 = VECTOR('',#11752,1.);+#11752 = DIRECTION('',(0.,-1.));+#11753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11754 = ORIENTED_EDGE('',*,*,#11245,.T.);+#11755 = ADVANCED_FACE('',(#11756),#499,.T.);+#11756 = FACE_BOUND('',#11757,.F.);+#11757 = EDGE_LOOP('',(#11758,#11759,#11782,#11805,#11828,#11851,#11874,+ #11895));+#11758 = ORIENTED_EDGE('',*,*,#483,.F.);+#11759 = ORIENTED_EDGE('',*,*,#11760,.F.);+#11760 = EDGE_CURVE('',#11761,#456,#11763,.T.);+#11761 = VERTEX_POINT('',#11762);+#11762 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+ 9.314404469578E-02));+#11763 = SURFACE_CURVE('',#11764,(#11768,#11775),.PCURVE_S1.);+#11764 = LINE('',#11765,#11766);+#11765 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+ 9.314404469578E-02));+#11766 = VECTOR('',#11767,1.);+#11767 = DIRECTION('',(0.,-1.,0.));+#11768 = PCURVE('',#499,#11769);+#11769 = DEFINITIONAL_REPRESENTATION('',(#11770),#11774);+#11770 = LINE('',#11771,#11772);+#11771 = CARTESIAN_POINT('',(-0.549634015034,-1.725434703034));+#11772 = VECTOR('',#11773,1.);+#11773 = DIRECTION('',(0.,-1.));+#11774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11775 = PCURVE('',#471,#11776);+#11776 = DEFINITIONAL_REPRESENTATION('',(#11777),#11781);+#11777 = LINE('',#11778,#11779);+#11778 = CARTESIAN_POINT('',(0.,0.));+#11779 = VECTOR('',#11780,1.);+#11780 = DIRECTION('',(1.,0.));+#11781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11782 = ORIENTED_EDGE('',*,*,#11783,.T.);+#11783 = EDGE_CURVE('',#11761,#11784,#11786,.T.);+#11784 = VERTEX_POINT('',#11785);+#11785 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+ 9.314404469578E-02));+#11786 = SURFACE_CURVE('',#11787,(#11791,#11798),.PCURVE_S1.);+#11787 = LINE('',#11788,#11789);+#11788 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+ 9.314404469578E-02));+#11789 = VECTOR('',#11790,1.);+#11790 = DIRECTION('',(-0.50000000009,0.866025403732,0.));+#11791 = PCURVE('',#499,#11792);+#11792 = DEFINITIONAL_REPRESENTATION('',(#11793),#11797);+#11793 = LINE('',#11794,#11795);+#11794 = CARTESIAN_POINT('',(-0.549634015034,-1.725434703034));+#11795 = VECTOR('',#11796,1.);+#11796 = DIRECTION('',(-0.50000000009,0.866025403732));+#11797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11798 = PCURVE('',#11396,#11799);+#11799 = DEFINITIONAL_REPRESENTATION('',(#11800),#11804);+#11800 = LINE('',#11801,#11802);+#11801 = CARTESIAN_POINT('',(8.000000000177E-02,0.));+#11802 = VECTOR('',#11803,1.);+#11803 = DIRECTION('',(-1.,0.));+#11804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11805 = ORIENTED_EDGE('',*,*,#11806,.F.);+#11806 = EDGE_CURVE('',#11807,#11784,#11809,.T.);+#11807 = VERTEX_POINT('',#11808);+#11808 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+ 9.314404469578E-02));+#11809 = SURFACE_CURVE('',#11810,(#11814,#11821),.PCURVE_S1.);+#11810 = LINE('',#11811,#11812);+#11811 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+ 9.314404469578E-02));+#11812 = VECTOR('',#11813,1.);+#11813 = DIRECTION('',(0.,-1.,0.));+#11814 = PCURVE('',#499,#11815);+#11815 = DEFINITIONAL_REPRESENTATION('',(#11816),#11820);+#11816 = LINE('',#11817,#11818);+#11817 = CARTESIAN_POINT('',(-0.589634015042,-1.57907546274));+#11818 = VECTOR('',#11819,1.);+#11819 = DIRECTION('',(0.,-1.));+#11820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11821 = PCURVE('',#11368,#11822);+#11822 = DEFINITIONAL_REPRESENTATION('',(#11823),#11827);+#11823 = LINE('',#11824,#11825);+#11824 = CARTESIAN_POINT('',(1.2301013789E-02,0.));+#11825 = VECTOR('',#11826,1.);+#11826 = DIRECTION('',(1.,0.));+#11827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11828 = ORIENTED_EDGE('',*,*,#11829,.T.);+#11829 = EDGE_CURVE('',#11807,#11830,#11832,.T.);+#11830 = VERTEX_POINT('',#11831);+#11831 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+ 9.314404469578E-02));+#11832 = SURFACE_CURVE('',#11833,(#11837,#11844),.PCURVE_S1.);+#11833 = LINE('',#11834,#11835);+#11834 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+ 9.314404469578E-02));+#11835 = VECTOR('',#11836,1.);+#11836 = DIRECTION('',(1.,0.,0.));+#11837 = PCURVE('',#499,#11838);+#11838 = DEFINITIONAL_REPRESENTATION('',(#11839),#11843);+#11839 = LINE('',#11840,#11841);+#11840 = CARTESIAN_POINT('',(-0.589634015042,-1.57907546274));+#11841 = VECTOR('',#11842,1.);+#11842 = DIRECTION('',(1.,0.));+#11843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11844 = PCURVE('',#11340,#11845);+#11845 = DEFINITIONAL_REPRESENTATION('',(#11846),#11850);+#11846 = LINE('',#11847,#11848);+#11847 = CARTESIAN_POINT('',(0.37744086234,-0.1));+#11848 = VECTOR('',#11849,1.);+#11849 = DIRECTION('',(1.,0.));+#11850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11851 = ORIENTED_EDGE('',*,*,#11852,.F.);+#11852 = EDGE_CURVE('',#11853,#11830,#11855,.T.);+#11853 = VERTEX_POINT('',#11854);+#11854 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+ 9.314404469578E-02));+#11855 = SURFACE_CURVE('',#11856,(#11860,#11867),.PCURVE_S1.);+#11856 = LINE('',#11857,#11858);+#11857 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+ 9.314404469578E-02));+#11858 = VECTOR('',#11859,1.);+#11859 = DIRECTION('',(0.,1.,0.));+#11860 = PCURVE('',#499,#11861);+#11861 = DEFINITIONAL_REPRESENTATION('',(#11862),#11866);+#11862 = LINE('',#11863,#11864);+#11863 = CARTESIAN_POINT('',(-0.314634015041,-1.656152670679));+#11864 = VECTOR('',#11865,1.);+#11865 = DIRECTION('',(0.,1.));+#11866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11867 = PCURVE('',#11312,#11868);+#11868 = DEFINITIONAL_REPRESENTATION('',(#11869),#11873);+#11869 = LINE('',#11870,#11871);+#11870 = CARTESIAN_POINT('',(0.,0.));+#11871 = VECTOR('',#11872,1.);+#11872 = DIRECTION('',(1.,0.));+#11873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11874 = ORIENTED_EDGE('',*,*,#11875,.T.);+#11875 = EDGE_CURVE('',#11853,#11712,#11876,.T.);+#11876 = SURFACE_CURVE('',#11877,(#11881,#11888),.PCURVE_S1.);+#11877 = LINE('',#11878,#11879);+#11878 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+ 9.314404469578E-02));+#11879 = VECTOR('',#11880,1.);+#11880 = DIRECTION('',(-0.500000000069,-0.866025403744,0.));+#11881 = PCURVE('',#499,#11882);+#11882 = DEFINITIONAL_REPRESENTATION('',(#11883),#11887);+#11883 = LINE('',#11884,#11885);+#11884 = CARTESIAN_POINT('',(-0.314634015041,-1.656152670679));+#11885 = VECTOR('',#11886,1.);+#11886 = DIRECTION('',(-0.500000000069,-0.866025403744));+#11887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11888 = PCURVE('',#11284,#11889);+#11889 = DEFINITIONAL_REPRESENTATION('',(#11890),#11894);+#11890 = LINE('',#11891,#11892);+#11891 = CARTESIAN_POINT('',(7.00000000045E-02,0.));+#11892 = VECTOR('',#11893,1.);+#11893 = DIRECTION('',(-1.,0.));+#11894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11895 = ORIENTED_EDGE('',*,*,#11711,.F.);+#11896 = ADVANCED_FACE('',(#11897),#471,.F.);+#11897 = FACE_BOUND('',#11898,.F.);+#11898 = EDGE_LOOP('',(#11899,#11900,#11901,#11922));+#11899 = ORIENTED_EDGE('',*,*,#455,.T.);+#11900 = ORIENTED_EDGE('',*,*,#11408,.T.);+#11901 = ORIENTED_EDGE('',*,*,#11902,.T.);+#11902 = EDGE_CURVE('',#11381,#11761,#11903,.T.);+#11903 = SURFACE_CURVE('',#11904,(#11908,#11915),.PCURVE_S1.);+#11904 = LINE('',#11905,#11906);+#11905 = CARTESIAN_POINT('',(2.239462039422,2.032407414415E-03,+ 0.193144044696));+#11906 = VECTOR('',#11907,1.);+#11907 = DIRECTION('',(0.,0.,-1.));+#11908 = PCURVE('',#471,#11909);+#11909 = DEFINITIONAL_REPRESENTATION('',(#11910),#11914);+#11910 = LINE('',#11911,#11912);+#11911 = CARTESIAN_POINT('',(0.,0.1));+#11912 = VECTOR('',#11913,1.);+#11913 = DIRECTION('',(0.,-1.));+#11914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11915 = PCURVE('',#11396,#11916);+#11916 = DEFINITIONAL_REPRESENTATION('',(#11917),#11921);+#11917 = LINE('',#11918,#11919);+#11918 = CARTESIAN_POINT('',(8.000000000177E-02,0.1));+#11919 = VECTOR('',#11920,1.);+#11920 = DIRECTION('',(0.,-1.));+#11921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11922 = ORIENTED_EDGE('',*,*,#11760,.T.);+#11923 = ADVANCED_FACE('',(#11924),#11396,.F.);+#11924 = FACE_BOUND('',#11925,.F.);+#11925 = EDGE_LOOP('',(#11926,#11927,#11928,#11929));+#11926 = ORIENTED_EDGE('',*,*,#11783,.F.);+#11927 = ORIENTED_EDGE('',*,*,#11902,.F.);+#11928 = ORIENTED_EDGE('',*,*,#11380,.F.);+#11929 = ORIENTED_EDGE('',*,*,#11930,.T.);+#11930 = EDGE_CURVE('',#11353,#11784,#11931,.T.);+#11931 = SURFACE_CURVE('',#11932,(#11936,#11943),.PCURVE_S1.);+#11932 = LINE('',#11933,#11934);+#11933 = CARTESIAN_POINT('',(2.199462039414,7.13144397146E-02,+ 0.193144044696));+#11934 = VECTOR('',#11935,1.);+#11935 = DIRECTION('',(0.,0.,-1.));+#11936 = PCURVE('',#11396,#11937);+#11937 = DEFINITIONAL_REPRESENTATION('',(#11938),#11942);+#11938 = LINE('',#11939,#11940);+#11939 = CARTESIAN_POINT('',(0.,0.1));+#11940 = VECTOR('',#11941,1.);+#11941 = DIRECTION('',(0.,-1.));+#11942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11943 = PCURVE('',#11368,#11944);+#11944 = DEFINITIONAL_REPRESENTATION('',(#11945),#11949);+#11945 = LINE('',#11946,#11947);+#11946 = CARTESIAN_POINT('',(8.93782217824E-02,0.1));+#11947 = VECTOR('',#11948,1.);+#11948 = DIRECTION('',(0.,-1.));+#11949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11950 = ADVANCED_FACE('',(#11951),#11368,.F.);+#11951 = FACE_BOUND('',#11952,.F.);+#11952 = EDGE_LOOP('',(#11953,#11974,#11975,#11976));+#11953 = ORIENTED_EDGE('',*,*,#11954,.F.);+#11954 = EDGE_CURVE('',#11807,#11325,#11955,.T.);+#11955 = SURFACE_CURVE('',#11956,(#11960,#11967),.PCURVE_S1.);+#11956 = LINE('',#11957,#11958);+#11957 = CARTESIAN_POINT('',(2.199462039414,0.148391647708,+ 9.314404469578E-02));+#11958 = VECTOR('',#11959,1.);+#11959 = DIRECTION('',(0.,0.,1.));+#11960 = PCURVE('',#11368,#11961);+#11961 = DEFINITIONAL_REPRESENTATION('',(#11962),#11966);+#11962 = LINE('',#11963,#11964);+#11963 = CARTESIAN_POINT('',(1.2301013789E-02,0.));+#11964 = VECTOR('',#11965,1.);+#11965 = DIRECTION('',(0.,1.));+#11966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11967 = PCURVE('',#11340,#11968);+#11968 = DEFINITIONAL_REPRESENTATION('',(#11969),#11973);+#11969 = LINE('',#11970,#11971);+#11970 = CARTESIAN_POINT('',(0.37744086234,-0.1));+#11971 = VECTOR('',#11972,1.);+#11972 = DIRECTION('',(0.,1.));+#11973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11974 = ORIENTED_EDGE('',*,*,#11806,.T.);+#11975 = ORIENTED_EDGE('',*,*,#11930,.F.);+#11976 = ORIENTED_EDGE('',*,*,#11352,.T.);+#11977 = ADVANCED_FACE('',(#11978),#11340,.T.);+#11978 = FACE_BOUND('',#11979,.F.);+#11979 = EDGE_LOOP('',(#11980,#11981,#12002,#12003));+#11980 = ORIENTED_EDGE('',*,*,#11324,.T.);+#11981 = ORIENTED_EDGE('',*,*,#11982,.F.);+#11982 = EDGE_CURVE('',#11830,#11297,#11983,.T.);+#11983 = SURFACE_CURVE('',#11984,(#11988,#11995),.PCURVE_S1.);+#11984 = LINE('',#11985,#11986);+#11985 = CARTESIAN_POINT('',(2.474462039415,0.148391647708,+ 9.314404469578E-02));+#11986 = VECTOR('',#11987,1.);+#11987 = DIRECTION('',(0.,0.,1.));+#11988 = PCURVE('',#11340,#11989);+#11989 = DEFINITIONAL_REPRESENTATION('',(#11990),#11994);+#11990 = LINE('',#11991,#11992);+#11991 = CARTESIAN_POINT('',(0.652440862341,-0.1));+#11992 = VECTOR('',#11993,1.);+#11993 = DIRECTION('',(0.,1.));+#11994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11995 = PCURVE('',#11312,#11996);+#11996 = DEFINITIONAL_REPRESENTATION('',(#11997),#12001);+#11997 = LINE('',#11998,#11999);+#11998 = CARTESIAN_POINT('',(7.707720793884E-02,0.));+#11999 = VECTOR('',#12000,1.);+#12000 = DIRECTION('',(0.,1.));+#12001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12002 = ORIENTED_EDGE('',*,*,#11829,.F.);+#12003 = ORIENTED_EDGE('',*,*,#11954,.T.);+#12004 = ADVANCED_FACE('',(#12005),#11312,.F.);+#12005 = FACE_BOUND('',#12006,.F.);+#12006 = EDGE_LOOP('',(#12007,#12008,#12009,#12030));+#12007 = ORIENTED_EDGE('',*,*,#11982,.T.);+#12008 = ORIENTED_EDGE('',*,*,#11296,.T.);+#12009 = ORIENTED_EDGE('',*,*,#12010,.T.);+#12010 = EDGE_CURVE('',#11269,#11853,#12011,.T.);+#12011 = SURFACE_CURVE('',#12012,(#12016,#12023),.PCURVE_S1.);+#12012 = LINE('',#12013,#12014);+#12013 = CARTESIAN_POINT('',(2.474462039415,7.131443976916E-02,+ 0.193144044696));+#12014 = VECTOR('',#12015,1.);+#12015 = DIRECTION('',(0.,0.,-1.));+#12016 = PCURVE('',#11312,#12017);+#12017 = DEFINITIONAL_REPRESENTATION('',(#12018),#12022);+#12018 = LINE('',#12019,#12020);+#12019 = CARTESIAN_POINT('',(0.,0.1));+#12020 = VECTOR('',#12021,1.);+#12021 = DIRECTION('',(0.,-1.));+#12022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12023 = PCURVE('',#11284,#12024);+#12024 = DEFINITIONAL_REPRESENTATION('',(#12025),#12029);+#12025 = LINE('',#12026,#12027);+#12026 = CARTESIAN_POINT('',(7.00000000045E-02,0.1));+#12027 = VECTOR('',#12028,1.);+#12028 = DIRECTION('',(0.,-1.));+#12029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12030 = ORIENTED_EDGE('',*,*,#11852,.T.);+#12031 = ADVANCED_FACE('',(#12032),#11284,.F.);+#12032 = FACE_BOUND('',#12033,.F.);+#12033 = EDGE_LOOP('',(#12034,#12035,#12036,#12037));+#12034 = ORIENTED_EDGE('',*,*,#11875,.F.);+#12035 = ORIENTED_EDGE('',*,*,#12010,.F.);+#12036 = ORIENTED_EDGE('',*,*,#11268,.F.);+#12037 = ORIENTED_EDGE('',*,*,#11734,.T.);+#12038 = ADVANCED_FACE('',(#12039),#3875,.F.);+#12039 = FACE_BOUND('',#12040,.F.);+#12040 = EDGE_LOOP('',(#12041,#12042,#12043,#12064));+#12041 = ORIENTED_EDGE('',*,*,#9637,.F.);+#12042 = ORIENTED_EDGE('',*,*,#3852,.F.);+#12043 = ORIENTED_EDGE('',*,*,#12044,.F.);+#12044 = EDGE_CURVE('',#9843,#3853,#12045,.T.);+#12045 = SURFACE_CURVE('',#12046,(#12050,#12057),.PCURVE_S1.);+#12046 = LINE('',#12047,#12048);+#12047 = CARTESIAN_POINT('',(3.424462039431,0.560692661497,+ 9.314404469578E-02));+#12048 = VECTOR('',#12049,1.);+#12049 = DIRECTION('',(0.,0.,-1.));+#12050 = PCURVE('',#3875,#12051);+#12051 = DEFINITIONAL_REPRESENTATION('',(#12052),#12056);+#12052 = LINE('',#12053,#12054);+#12053 = CARTESIAN_POINT('',(4.470391181211E-12,0.));+#12054 = VECTOR('',#12055,1.);+#12055 = DIRECTION('',(0.,1.));+#12056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12057 = PCURVE('',#4008,#12058);+#12058 = DEFINITIONAL_REPRESENTATION('',(#12059),#12063);+#12059 = LINE('',#12060,#12061);+#12060 = CARTESIAN_POINT('',(-6.625000104066E-09,0.));+#12061 = VECTOR('',#12062,1.);+#12062 = DIRECTION('',(0.,-1.));+#12063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12064 = ORIENTED_EDGE('',*,*,#9842,.T.);+#12065 = ADVANCED_FACE('',(#12066),#4008,.F.);+#12066 = FACE_BOUND('',#12067,.F.);+#12067 = EDGE_LOOP('',(#12068,#12069,#12090,#12091));+#12068 = ORIENTED_EDGE('',*,*,#3994,.T.);+#12069 = ORIENTED_EDGE('',*,*,#12070,.T.);+#12070 = EDGE_CURVE('',#3967,#9866,#12071,.T.);+#12071 = SURFACE_CURVE('',#12072,(#12076,#12083),.PCURVE_S1.);+#12072 = LINE('',#12073,#12074);+#12073 = CARTESIAN_POINT('',(3.29946203942,0.560692661497,0.));+#12074 = VECTOR('',#12075,1.);+#12075 = DIRECTION('',(0.,0.,1.));+#12076 = PCURVE('',#4008,#12077);+#12077 = DEFINITIONAL_REPRESENTATION('',(#12078),#12082);+#12078 = LINE('',#12079,#12080);+#12079 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12080 = VECTOR('',#12081,1.);+#12081 = DIRECTION('',(0.,1.));+#12082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12083 = PCURVE('',#3982,#12084);+#12084 = DEFINITIONAL_REPRESENTATION('',(#12085),#12089);+#12085 = LINE('',#12086,#12087);+#12086 = CARTESIAN_POINT('',(0.250000000001,9.314404469578E-02));+#12087 = VECTOR('',#12088,1.);+#12088 = DIRECTION('',(0.,-1.));+#12089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12090 = ORIENTED_EDGE('',*,*,#9865,.F.);+#12091 = ORIENTED_EDGE('',*,*,#12044,.T.);+#12092 = ADVANCED_FACE('',(#12093),#3982,.F.);+#12093 = FACE_BOUND('',#12094,.F.);+#12094 = EDGE_LOOP('',(#12095,#12096,#12117,#12118));+#12095 = ORIENTED_EDGE('',*,*,#3966,.F.);+#12096 = ORIENTED_EDGE('',*,*,#12097,.T.);+#12097 = EDGE_CURVE('',#3939,#9889,#12098,.T.);+#12098 = SURFACE_CURVE('',#12099,(#12103,#12110),.PCURVE_S1.);+#12099 = LINE('',#12100,#12101);+#12100 = CARTESIAN_POINT('',(3.29946203942,0.810692661502,0.));+#12101 = VECTOR('',#12102,1.);+#12102 = DIRECTION('',(0.,0.,1.));+#12103 = PCURVE('',#3982,#12104);+#12104 = DEFINITIONAL_REPRESENTATION('',(#12105),#12109);+#12105 = LINE('',#12106,#12107);+#12106 = CARTESIAN_POINT('',(-4.000022535422E-12,9.314404469578E-02));+#12107 = VECTOR('',#12108,1.);+#12108 = DIRECTION('',(0.,-1.));+#12109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12110 = PCURVE('',#3954,#12111);+#12111 = DEFINITIONAL_REPRESENTATION('',(#12112),#12116);+#12112 = LINE('',#12113,#12114);+#12113 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#12114 = VECTOR('',#12115,1.);+#12115 = DIRECTION('',(0.,1.));+#12116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12117 = ORIENTED_EDGE('',*,*,#9888,.T.);+#12118 = ORIENTED_EDGE('',*,*,#12070,.F.);+#12119 = ADVANCED_FACE('',(#12120),#3954,.F.);+#12120 = FACE_BOUND('',#12121,.F.);+#12121 = EDGE_LOOP('',(#12122,#12123,#12144,#12145));+#12122 = ORIENTED_EDGE('',*,*,#3938,.T.);+#12123 = ORIENTED_EDGE('',*,*,#12124,.T.);+#12124 = EDGE_CURVE('',#3911,#9912,#12125,.T.);+#12125 = SURFACE_CURVE('',#12126,(#12130,#12137),.PCURVE_S1.);+#12126 = LINE('',#12127,#12128);+#12127 = CARTESIAN_POINT('',(3.424462039434,0.810692661502,0.));+#12128 = VECTOR('',#12129,1.);+#12129 = DIRECTION('',(0.,0.,1.));+#12130 = PCURVE('',#3954,#12131);+#12131 = DEFINITIONAL_REPRESENTATION('',(#12132),#12136);+#12132 = LINE('',#12133,#12134);+#12133 = CARTESIAN_POINT('',(7.5000000022E-02,-9.314404469578E-02));+#12134 = VECTOR('',#12135,1.);+#12135 = DIRECTION('',(0.,1.));+#12136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12137 = PCURVE('',#3926,#12138);+#12138 = DEFINITIONAL_REPRESENTATION('',(#12139),#12143);+#12139 = LINE('',#12140,#12141);+#12140 = CARTESIAN_POINT('',(8.27647267759E-02,9.314404469578E-02));+#12141 = VECTOR('',#12142,1.);+#12142 = DIRECTION('',(0.,-1.));+#12143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12144 = ORIENTED_EDGE('',*,*,#9911,.F.);+#12145 = ORIENTED_EDGE('',*,*,#12097,.F.);+#12146 = ADVANCED_FACE('',(#12147),#3926,.F.);+#12147 = FACE_BOUND('',#12148,.F.);+#12148 = EDGE_LOOP('',(#12149,#12150,#12151,#12152));+#12149 = ORIENTED_EDGE('',*,*,#9615,.T.);+#12150 = ORIENTED_EDGE('',*,*,#9934,.T.);+#12151 = ORIENTED_EDGE('',*,*,#12124,.F.);+#12152 = ORIENTED_EDGE('',*,*,#3910,.F.);+#12153 = ADVANCED_FACE('',(#12154),#4046,.F.);+#12154 = FACE_BOUND('',#12155,.F.);+#12155 = EDGE_LOOP('',(#12156,#12157,#12158,#12179));+#12156 = ORIENTED_EDGE('',*,*,#9462,.F.);+#12157 = ORIENTED_EDGE('',*,*,#4023,.F.);+#12158 = ORIENTED_EDGE('',*,*,#12159,.F.);+#12159 = EDGE_CURVE('',#10030,#4024,#12160,.T.);+#12160 = SURFACE_CURVE('',#12161,(#12165,#12172),.PCURVE_S1.);+#12161 = LINE('',#12162,#12163);+#12162 = CARTESIAN_POINT('',(3.424462039427,1.060692661499,+ 9.314404469578E-02));+#12163 = VECTOR('',#12164,1.);+#12164 = DIRECTION('',(0.,0.,-1.));+#12165 = PCURVE('',#4046,#12166);+#12166 = DEFINITIONAL_REPRESENTATION('',(#12167),#12171);+#12167 = LINE('',#12168,#12169);+#12168 = CARTESIAN_POINT('',(0.,0.));+#12169 = VECTOR('',#12170,1.);+#12170 = DIRECTION('',(0.,1.));+#12171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12172 = PCURVE('',#4179,#12173);+#12173 = DEFINITIONAL_REPRESENTATION('',(#12174),#12178);+#12174 = LINE('',#12175,#12176);+#12175 = CARTESIAN_POINT('',(-6.621000192553E-09,0.));+#12176 = VECTOR('',#12177,1.);+#12177 = DIRECTION('',(0.,-1.));+#12178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12179 = ORIENTED_EDGE('',*,*,#10029,.T.);+#12180 = ADVANCED_FACE('',(#12181),#4179,.F.);+#12181 = FACE_BOUND('',#12182,.F.);+#12182 = EDGE_LOOP('',(#12183,#12184,#12205,#12206));+#12183 = ORIENTED_EDGE('',*,*,#4165,.T.);+#12184 = ORIENTED_EDGE('',*,*,#12185,.T.);+#12185 = EDGE_CURVE('',#4138,#10053,#12186,.T.);+#12186 = SURFACE_CURVE('',#12187,(#12191,#12198),.PCURVE_S1.);+#12187 = LINE('',#12188,#12189);+#12188 = CARTESIAN_POINT('',(3.29946203942,1.060692661499,0.));+#12189 = VECTOR('',#12190,1.);+#12190 = DIRECTION('',(0.,0.,1.));+#12191 = PCURVE('',#4179,#12192);+#12192 = DEFINITIONAL_REPRESENTATION('',(#12193),#12197);+#12193 = LINE('',#12194,#12195);+#12194 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12195 = VECTOR('',#12196,1.);+#12196 = DIRECTION('',(0.,1.));+#12197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12198 = PCURVE('',#4153,#12199);+#12199 = DEFINITIONAL_REPRESENTATION('',(#12200),#12204);+#12200 = LINE('',#12201,#12202);+#12201 = CARTESIAN_POINT('',(0.25,9.314404469578E-02));+#12202 = VECTOR('',#12203,1.);+#12203 = DIRECTION('',(0.,-1.));+#12204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12205 = ORIENTED_EDGE('',*,*,#10052,.F.);+#12206 = ORIENTED_EDGE('',*,*,#12159,.T.);+#12207 = ADVANCED_FACE('',(#12208),#4153,.F.);+#12208 = FACE_BOUND('',#12209,.F.);+#12209 = EDGE_LOOP('',(#12210,#12211,#12232,#12233));+#12210 = ORIENTED_EDGE('',*,*,#4137,.F.);+#12211 = ORIENTED_EDGE('',*,*,#12212,.T.);+#12212 = EDGE_CURVE('',#4110,#10076,#12213,.T.);+#12213 = SURFACE_CURVE('',#12214,(#12218,#12225),.PCURVE_S1.);+#12214 = LINE('',#12215,#12216);+#12215 = CARTESIAN_POINT('',(3.29946203942,1.310692661495,0.));+#12216 = VECTOR('',#12217,1.);+#12217 = DIRECTION('',(0.,0.,1.));+#12218 = PCURVE('',#4153,#12219);+#12219 = DEFINITIONAL_REPRESENTATION('',(#12220),#12224);+#12220 = LINE('',#12221,#12222);+#12221 = CARTESIAN_POINT('',(3.99991151312E-12,9.314404469578E-02));+#12222 = VECTOR('',#12223,1.);+#12223 = DIRECTION('',(0.,-1.));+#12224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12225 = PCURVE('',#4125,#12226);+#12226 = DEFINITIONAL_REPRESENTATION('',(#12227),#12231);+#12227 = LINE('',#12228,#12229);+#12228 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#12229 = VECTOR('',#12230,1.);+#12230 = DIRECTION('',(0.,1.));+#12231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12232 = ORIENTED_EDGE('',*,*,#10075,.T.);+#12233 = ORIENTED_EDGE('',*,*,#12185,.F.);+#12234 = ADVANCED_FACE('',(#12235),#4125,.F.);+#12235 = FACE_BOUND('',#12236,.F.);+#12236 = EDGE_LOOP('',(#12237,#12238,#12259,#12260));+#12237 = ORIENTED_EDGE('',*,*,#4109,.T.);+#12238 = ORIENTED_EDGE('',*,*,#12239,.T.);+#12239 = EDGE_CURVE('',#4082,#10099,#12240,.T.);+#12240 = SURFACE_CURVE('',#12241,(#12245,#12252),.PCURVE_S1.);+#12241 = LINE('',#12242,#12243);+#12242 = CARTESIAN_POINT('',(3.42446203942,1.310692661495,0.));+#12243 = VECTOR('',#12244,1.);+#12244 = DIRECTION('',(0.,0.,1.));+#12245 = PCURVE('',#4125,#12246);+#12246 = DEFINITIONAL_REPRESENTATION('',(#12247),#12251);+#12247 = LINE('',#12248,#12249);+#12248 = CARTESIAN_POINT('',(7.5000006611E-02,-9.314404469578E-02));+#12249 = VECTOR('',#12250,1.);+#12250 = DIRECTION('',(0.,1.));+#12251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12252 = PCURVE('',#4097,#12253);+#12253 = DEFINITIONAL_REPRESENTATION('',(#12254),#12258);+#12254 = LINE('',#12255,#12256);+#12255 = CARTESIAN_POINT('',(8.276472679155E-02,9.314404469578E-02));+#12256 = VECTOR('',#12257,1.);+#12257 = DIRECTION('',(0.,-1.));+#12258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12259 = ORIENTED_EDGE('',*,*,#10098,.F.);+#12260 = ORIENTED_EDGE('',*,*,#12212,.F.);+#12261 = ADVANCED_FACE('',(#12262),#4097,.F.);+#12262 = FACE_BOUND('',#12263,.F.);+#12263 = EDGE_LOOP('',(#12264,#12265,#12266,#12267));+#12264 = ORIENTED_EDGE('',*,*,#9440,.T.);+#12265 = ORIENTED_EDGE('',*,*,#10121,.T.);+#12266 = ORIENTED_EDGE('',*,*,#12239,.F.);+#12267 = ORIENTED_EDGE('',*,*,#4081,.F.);+#12268 = ADVANCED_FACE('',(#12269),#3704,.F.);+#12269 = FACE_BOUND('',#12270,.F.);+#12270 = EDGE_LOOP('',(#12271,#12272,#12273,#12294));+#12271 = ORIENTED_EDGE('',*,*,#9287,.F.);+#12272 = ORIENTED_EDGE('',*,*,#3681,.F.);+#12273 = ORIENTED_EDGE('',*,*,#12274,.F.);+#12274 = EDGE_CURVE('',#10217,#3682,#12275,.T.);+#12275 = SURFACE_CURVE('',#12276,(#12280,#12287),.PCURVE_S1.);+#12276 = LINE('',#12277,#12278);+#12277 = CARTESIAN_POINT('',(3.424462039423,1.560692661501,+ 9.314404469578E-02));+#12278 = VECTOR('',#12279,1.);+#12279 = DIRECTION('',(0.,0.,-1.));+#12280 = PCURVE('',#3704,#12281);+#12281 = DEFINITIONAL_REPRESENTATION('',(#12282),#12286);+#12282 = LINE('',#12283,#12284);+#12283 = CARTESIAN_POINT('',(-4.470391181211E-12,0.));+#12284 = VECTOR('',#12285,1.);+#12285 = DIRECTION('',(0.,1.));+#12286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12287 = PCURVE('',#3837,#12288);+#12288 = DEFINITIONAL_REPRESENTATION('',(#12289),#12293);+#12289 = LINE('',#12290,#12291);+#12290 = CARTESIAN_POINT('',(-6.61700028104E-09,0.));+#12291 = VECTOR('',#12292,1.);+#12292 = DIRECTION('',(0.,-1.));+#12293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12294 = ORIENTED_EDGE('',*,*,#10216,.T.);+#12295 = ADVANCED_FACE('',(#12296),#3837,.F.);+#12296 = FACE_BOUND('',#12297,.F.);+#12297 = EDGE_LOOP('',(#12298,#12299,#12320,#12321));+#12298 = ORIENTED_EDGE('',*,*,#3823,.T.);+#12299 = ORIENTED_EDGE('',*,*,#12300,.T.);+#12300 = EDGE_CURVE('',#3796,#10240,#12301,.T.);+#12301 = SURFACE_CURVE('',#12302,(#12306,#12313),.PCURVE_S1.);+#12302 = LINE('',#12303,#12304);+#12303 = CARTESIAN_POINT('',(3.29946203942,1.560692661501,0.));+#12304 = VECTOR('',#12305,1.);+#12305 = DIRECTION('',(0.,0.,1.));+#12306 = PCURVE('',#3837,#12307);+#12307 = DEFINITIONAL_REPRESENTATION('',(#12308),#12312);+#12308 = LINE('',#12309,#12310);+#12309 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12310 = VECTOR('',#12311,1.);+#12311 = DIRECTION('',(0.,1.));+#12312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12313 = PCURVE('',#3811,#12314);+#12314 = DEFINITIONAL_REPRESENTATION('',(#12315),#12319);+#12315 = LINE('',#12316,#12317);+#12316 = CARTESIAN_POINT('',(0.249999999998,9.314404469578E-02));+#12317 = VECTOR('',#12318,1.);+#12318 = DIRECTION('',(0.,-1.));+#12319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12320 = ORIENTED_EDGE('',*,*,#10239,.F.);+#12321 = ORIENTED_EDGE('',*,*,#12274,.T.);+#12322 = ADVANCED_FACE('',(#12323),#3811,.F.);+#12323 = FACE_BOUND('',#12324,.F.);+#12324 = EDGE_LOOP('',(#12325,#12326,#12347,#12348));+#12325 = ORIENTED_EDGE('',*,*,#3795,.F.);+#12326 = ORIENTED_EDGE('',*,*,#12327,.T.);+#12327 = EDGE_CURVE('',#3768,#10263,#12328,.T.);+#12328 = SURFACE_CURVE('',#12329,(#12333,#12340),.PCURVE_S1.);+#12329 = LINE('',#12330,#12331);+#12330 = CARTESIAN_POINT('',(3.29946203942,1.810692661497,0.));+#12331 = VECTOR('',#12332,1.);+#12332 = DIRECTION('',(0.,0.,1.));+#12333 = PCURVE('',#3811,#12334);+#12334 = DEFINITIONAL_REPRESENTATION('',(#12335),#12339);+#12335 = LINE('',#12336,#12337);+#12336 = CARTESIAN_POINT('',(1.99995575656E-12,9.314404469578E-02));+#12337 = VECTOR('',#12338,1.);+#12338 = DIRECTION('',(0.,-1.));+#12339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12340 = PCURVE('',#3783,#12341);+#12341 = DEFINITIONAL_REPRESENTATION('',(#12342),#12346);+#12342 = LINE('',#12343,#12344);+#12343 = CARTESIAN_POINT('',(-4.9999999992E-02,-9.314404469578E-02));+#12344 = VECTOR('',#12345,1.);+#12345 = DIRECTION('',(0.,1.));+#12346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12347 = ORIENTED_EDGE('',*,*,#10262,.T.);+#12348 = ORIENTED_EDGE('',*,*,#12300,.F.);+#12349 = ADVANCED_FACE('',(#12350),#3783,.F.);+#12350 = FACE_BOUND('',#12351,.F.);+#12351 = EDGE_LOOP('',(#12352,#12353,#12374,#12375));+#12352 = ORIENTED_EDGE('',*,*,#3767,.T.);+#12353 = ORIENTED_EDGE('',*,*,#12354,.T.);+#12354 = EDGE_CURVE('',#3740,#10286,#12355,.T.);+#12355 = SURFACE_CURVE('',#12356,(#12360,#12367),.PCURVE_S1.);+#12356 = LINE('',#12357,#12358);+#12357 = CARTESIAN_POINT('',(3.424462039423,1.810692661497,0.));+#12358 = VECTOR('',#12359,1.);+#12359 = DIRECTION('',(0.,0.,1.));+#12360 = PCURVE('',#3783,#12361);+#12361 = DEFINITIONAL_REPRESENTATION('',(#12362),#12366);+#12362 = LINE('',#12363,#12364);+#12363 = CARTESIAN_POINT('',(7.5000000011E-02,-9.314404469578E-02));+#12364 = VECTOR('',#12365,1.);+#12365 = DIRECTION('',(0.,1.));+#12366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12367 = PCURVE('',#3755,#12368);+#12368 = DEFINITIONAL_REPRESENTATION('',(#12369),#12373);+#12369 = LINE('',#12370,#12371);+#12370 = CARTESIAN_POINT('',(8.276472678799E-02,9.314404469578E-02));+#12371 = VECTOR('',#12372,1.);+#12372 = DIRECTION('',(0.,-1.));+#12373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12374 = ORIENTED_EDGE('',*,*,#10285,.F.);+#12375 = ORIENTED_EDGE('',*,*,#12327,.F.);+#12376 = ADVANCED_FACE('',(#12377),#3755,.F.);+#12377 = FACE_BOUND('',#12378,.F.);+#12378 = EDGE_LOOP('',(#12379,#12380,#12381,#12382));+#12379 = ORIENTED_EDGE('',*,*,#9265,.T.);+#12380 = ORIENTED_EDGE('',*,*,#10308,.T.);+#12381 = ORIENTED_EDGE('',*,*,#12354,.F.);+#12382 = ORIENTED_EDGE('',*,*,#3739,.F.);+#12383 = ADVANCED_FACE('',(#12384),#3589,.F.);+#12384 = FACE_BOUND('',#12385,.F.);+#12385 = EDGE_LOOP('',(#12386,#12387,#12388,#12409));+#12386 = ORIENTED_EDGE('',*,*,#9112,.F.);+#12387 = ORIENTED_EDGE('',*,*,#3573,.T.);+#12388 = ORIENTED_EDGE('',*,*,#12389,.T.);+#12389 = EDGE_CURVE('',#3546,#10404,#12390,.T.);+#12390 = SURFACE_CURVE('',#12391,(#12395,#12402),.PCURVE_S1.);+#12391 = LINE('',#12392,#12393);+#12392 = CARTESIAN_POINT('',(3.424462032806,2.060692661502,0.));+#12393 = VECTOR('',#12394,1.);+#12394 = DIRECTION('',(0.,0.,1.));+#12395 = PCURVE('',#3589,#12396);+#12396 = DEFINITIONAL_REPRESENTATION('',(#12397),#12401);+#12397 = LINE('',#12398,#12399);+#12398 = CARTESIAN_POINT('',(8.276473409007E-02,-9.314404469578E-02));+#12399 = VECTOR('',#12400,1.);+#12400 = DIRECTION('',(0.,1.));+#12401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12402 = PCURVE('',#3561,#12403);+#12403 = DEFINITIONAL_REPRESENTATION('',(#12404),#12408);+#12404 = LINE('',#12405,#12406);+#12405 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12406 = VECTOR('',#12407,1.);+#12407 = DIRECTION('',(0.,1.));+#12408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12409 = ORIENTED_EDGE('',*,*,#10403,.T.);+#12410 = ADVANCED_FACE('',(#12411),#3561,.F.);+#12411 = FACE_BOUND('',#12412,.F.);+#12412 = EDGE_LOOP('',(#12413,#12414,#12435,#12436));+#12413 = ORIENTED_EDGE('',*,*,#3545,.T.);+#12414 = ORIENTED_EDGE('',*,*,#12415,.T.);+#12415 = EDGE_CURVE('',#3518,#10427,#12416,.T.);+#12416 = SURFACE_CURVE('',#12417,(#12421,#12428),.PCURVE_S1.);+#12417 = LINE('',#12418,#12419);+#12418 = CARTESIAN_POINT('',(3.29946203942,2.060692661502,0.));+#12419 = VECTOR('',#12420,1.);+#12420 = DIRECTION('',(0.,0.,1.));+#12421 = PCURVE('',#3561,#12422);+#12422 = DEFINITIONAL_REPRESENTATION('',(#12423),#12427);+#12423 = LINE('',#12424,#12425);+#12424 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12425 = VECTOR('',#12426,1.);+#12426 = DIRECTION('',(0.,1.));+#12427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12428 = PCURVE('',#3533,#12429);+#12429 = DEFINITIONAL_REPRESENTATION('',(#12430),#12434);+#12430 = LINE('',#12431,#12432);+#12431 = CARTESIAN_POINT('',(0.199906852712,9.314404469578E-02));+#12432 = VECTOR('',#12433,1.);+#12433 = DIRECTION('',(0.,-1.));+#12434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12435 = ORIENTED_EDGE('',*,*,#10426,.F.);+#12436 = ORIENTED_EDGE('',*,*,#12389,.F.);+#12437 = ADVANCED_FACE('',(#12438),#3533,.F.);+#12438 = FACE_BOUND('',#12439,.F.);+#12439 = EDGE_LOOP('',(#12440,#12441,#12462,#12463));+#12440 = ORIENTED_EDGE('',*,*,#3517,.F.);+#12441 = ORIENTED_EDGE('',*,*,#12442,.T.);+#12442 = EDGE_CURVE('',#3490,#10450,#12443,.T.);+#12443 = SURFACE_CURVE('',#12444,(#12448,#12455),.PCURVE_S1.);+#12444 = LINE('',#12445,#12446);+#12445 = CARTESIAN_POINT('',(3.299421523723,2.260599510108,0.));+#12446 = VECTOR('',#12447,1.);+#12447 = DIRECTION('',(0.,0.,1.));+#12448 = PCURVE('',#3533,#12449);+#12449 = DEFINITIONAL_REPRESENTATION('',(#12450),#12454);+#12450 = LINE('',#12451,#12452);+#12451 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#12452 = VECTOR('',#12453,1.);+#12453 = DIRECTION('',(0.,-1.));+#12454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12455 = PCURVE('',#3505,#12456);+#12456 = DEFINITIONAL_REPRESENTATION('',(#12457),#12461);+#12457 = LINE('',#12458,#12459);+#12458 = CARTESIAN_POINT('',(0.999959484307,9.314404469578E-02));+#12459 = VECTOR('',#12460,1.);+#12460 = DIRECTION('',(0.,-1.));+#12461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12462 = ORIENTED_EDGE('',*,*,#10449,.T.);+#12463 = ORIENTED_EDGE('',*,*,#12415,.F.);+#12464 = ADVANCED_FACE('',(#12465),#3505,.F.);+#12465 = FACE_BOUND('',#12466,.F.);+#12466 = EDGE_LOOP('',(#12467,#12468,#12489,#12490));+#12467 = ORIENTED_EDGE('',*,*,#3489,.F.);+#12468 = ORIENTED_EDGE('',*,*,#12469,.F.);+#12469 = EDGE_CURVE('',#10473,#3457,#12470,.T.);+#12470 = SURFACE_CURVE('',#12471,(#12475,#12482),.PCURVE_S1.);+#12471 = LINE('',#12472,#12473);+#12472 = CARTESIAN_POINT('',(2.299462039416,2.260599510108,+ 9.314404469578E-02));+#12473 = VECTOR('',#12474,1.);+#12474 = DIRECTION('',(-1.144264356483E-13,0.,-1.));+#12475 = PCURVE('',#3505,#12476);+#12476 = DEFINITIONAL_REPRESENTATION('',(#12477),#12481);+#12477 = LINE('',#12478,#12479);+#12478 = CARTESIAN_POINT('',(0.,0.));+#12479 = VECTOR('',#12480,1.);+#12480 = DIRECTION('',(-1.144264356483E-13,1.));+#12481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12482 = PCURVE('',#3477,#12483);+#12483 = DEFINITIONAL_REPRESENTATION('',(#12484),#12488);+#12484 = LINE('',#12485,#12486);+#12485 = CARTESIAN_POINT('',(4.712388980355,0.));+#12486 = VECTOR('',#12487,1.);+#12487 = DIRECTION('',(-1.144264356483E-12,1.));+#12488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12489 = ORIENTED_EDGE('',*,*,#10472,.T.);+#12490 = ORIENTED_EDGE('',*,*,#12442,.F.);+#12491 = ADVANCED_FACE('',(#12492),#3477,.F.);+#12492 = FACE_BOUND('',#12493,.F.);+#12493 = EDGE_LOOP('',(#12494,#12495,#12516,#12517));+#12494 = ORIENTED_EDGE('',*,*,#3456,.F.);+#12495 = ORIENTED_EDGE('',*,*,#12496,.T.);+#12496 = EDGE_CURVE('',#3429,#10496,#12497,.T.);+#12497 = SURFACE_CURVE('',#12498,(#12502,#12509),.PCURVE_S1.);+#12498 = LINE('',#12499,#12500);+#12499 = CARTESIAN_POINT('',(2.199462039414,2.160599510107,0.));+#12500 = VECTOR('',#12501,1.);+#12501 = DIRECTION('',(0.,3.50907735988E-11,1.));+#12502 = PCURVE('',#3477,#12503);+#12503 = DEFINITIONAL_REPRESENTATION('',(#12504),#12508);+#12504 = LINE('',#12505,#12506);+#12505 = CARTESIAN_POINT('',(3.14159265358,9.314404469578E-02));+#12506 = VECTOR('',#12507,1.);+#12507 = DIRECTION('',(3.50907735988E-10,-1.));+#12508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12509 = PCURVE('',#3444,#12510);+#12510 = DEFINITIONAL_REPRESENTATION('',(#12511),#12515);+#12511 = LINE('',#12512,#12513);+#12512 = CARTESIAN_POINT('',(1.849906848552,9.314404469578E-02));+#12513 = VECTOR('',#12514,1.);+#12514 = DIRECTION('',(3.50907735988E-11,-1.));+#12515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12516 = ORIENTED_EDGE('',*,*,#10495,.T.);+#12517 = ORIENTED_EDGE('',*,*,#12469,.T.);+#12518 = ADVANCED_FACE('',(#12519),#3444,.F.);+#12519 = FACE_BOUND('',#12520,.F.);+#12520 = EDGE_LOOP('',(#12521,#12522,#12543,#12544));+#12521 = ORIENTED_EDGE('',*,*,#3428,.F.);+#12522 = ORIENTED_EDGE('',*,*,#12523,.F.);+#12523 = EDGE_CURVE('',#10524,#3396,#12524,.T.);+#12524 = SURFACE_CURVE('',#12525,(#12529,#12536),.PCURVE_S1.);+#12525 = LINE('',#12526,#12527);+#12526 = CARTESIAN_POINT('',(2.199462039417,0.310692661587,+ 9.314404469578E-02));+#12527 = VECTOR('',#12528,1.);+#12528 = DIRECTION('',(0.,-6.832092567628E-11,-1.));+#12529 = PCURVE('',#3444,#12530);+#12530 = DEFINITIONAL_REPRESENTATION('',(#12531),#12535);+#12531 = LINE('',#12532,#12533);+#12532 = CARTESIAN_POINT('',(3.199995823877E-11,0.));+#12533 = VECTOR('',#12534,1.);+#12534 = DIRECTION('',(-6.832092567628E-11,1.));+#12535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12536 = PCURVE('',#3416,#12537);+#12537 = DEFINITIONAL_REPRESENTATION('',(#12538),#12542);+#12538 = LINE('',#12539,#12540);+#12539 = CARTESIAN_POINT('',(4.712388980725,0.));+#12540 = VECTOR('',#12541,1.);+#12541 = DIRECTION('',(-6.832116406469E-10,1.));+#12542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12543 = ORIENTED_EDGE('',*,*,#10523,.T.);+#12544 = ORIENTED_EDGE('',*,*,#12496,.F.);+#12545 = ADVANCED_FACE('',(#12546),#3416,.F.);+#12546 = FACE_BOUND('',#12547,.F.);+#12547 = EDGE_LOOP('',(#12548,#12549,#12570,#12571));+#12548 = ORIENTED_EDGE('',*,*,#3395,.F.);+#12549 = ORIENTED_EDGE('',*,*,#12550,.T.);+#12550 = EDGE_CURVE('',#3368,#10547,#12551,.T.);+#12551 = SURFACE_CURVE('',#12552,(#12556,#12563),.PCURVE_S1.);+#12552 = LINE('',#12553,#12554);+#12553 = CARTESIAN_POINT('',(2.299462039438,0.210692661554,0.));+#12554 = VECTOR('',#12555,1.);+#12555 = DIRECTION('',(1.061162157593E-10,0.,1.));+#12556 = PCURVE('',#3416,#12557);+#12557 = DEFINITIONAL_REPRESENTATION('',(#12558),#12562);+#12558 = LINE('',#12559,#12560);+#12559 = CARTESIAN_POINT('',(3.14159265337,9.314404469578E-02));+#12560 = VECTOR('',#12561,1.);+#12561 = DIRECTION('',(-1.061162157593E-09,-1.));+#12562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12563 = PCURVE('',#3383,#12564);+#12564 = DEFINITIONAL_REPRESENTATION('',(#12565),#12569);+#12565 = LINE('',#12566,#12567);+#12566 = CARTESIAN_POINT('',(0.999999999982,9.314404469578E-02));+#12567 = VECTOR('',#12568,1.);+#12568 = DIRECTION('',(-1.061162157593E-10,-1.));+#12569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12570 = ORIENTED_EDGE('',*,*,#10546,.T.);+#12571 = ORIENTED_EDGE('',*,*,#12523,.T.);+#12572 = ADVANCED_FACE('',(#12573),#3383,.F.);+#12573 = FACE_BOUND('',#12574,.F.);+#12574 = EDGE_LOOP('',(#12575,#12576,#12597,#12598));+#12575 = ORIENTED_EDGE('',*,*,#3367,.F.);+#12576 = ORIENTED_EDGE('',*,*,#12577,.T.);+#12577 = EDGE_CURVE('',#3340,#10575,#12578,.T.);+#12578 = SURFACE_CURVE('',#12579,(#12583,#12590),.PCURVE_S1.);+#12579 = LINE('',#12580,#12581);+#12580 = CARTESIAN_POINT('',(3.29946203942,0.210692661498,0.));+#12581 = VECTOR('',#12582,1.);+#12582 = DIRECTION('',(0.,0.,1.));+#12583 = PCURVE('',#3383,#12584);+#12584 = DEFINITIONAL_REPRESENTATION('',(#12585),#12589);+#12585 = LINE('',#12586,#12587);+#12586 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#12587 = VECTOR('',#12588,1.);+#12588 = DIRECTION('',(0.,-1.));+#12589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12590 = PCURVE('',#3355,#12591);+#12591 = DEFINITIONAL_REPRESENTATION('',(#12592),#12596);+#12592 = LINE('',#12593,#12594);+#12593 = CARTESIAN_POINT('',(0.1,9.314404469578E-02));+#12594 = VECTOR('',#12595,1.);+#12595 = DIRECTION('',(0.,-1.));+#12596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12597 = ORIENTED_EDGE('',*,*,#10574,.T.);+#12598 = ORIENTED_EDGE('',*,*,#12550,.F.);+#12599 = ADVANCED_FACE('',(#12600),#3355,.F.);+#12600 = FACE_BOUND('',#12601,.F.);+#12601 = EDGE_LOOP('',(#12602,#12603,#12624,#12625));+#12602 = ORIENTED_EDGE('',*,*,#3339,.F.);+#12603 = ORIENTED_EDGE('',*,*,#12604,.T.);+#12604 = EDGE_CURVE('',#3312,#10598,#12605,.T.);+#12605 = SURFACE_CURVE('',#12606,(#12610,#12617),.PCURVE_S1.);+#12606 = LINE('',#12607,#12608);+#12607 = CARTESIAN_POINT('',(3.29946203942,0.310692661501,0.));+#12608 = VECTOR('',#12609,1.);+#12609 = DIRECTION('',(0.,0.,1.));+#12610 = PCURVE('',#3355,#12611);+#12611 = DEFINITIONAL_REPRESENTATION('',(#12612),#12616);+#12612 = LINE('',#12613,#12614);+#12613 = CARTESIAN_POINT('',(-2.999989145991E-12,9.314404469578E-02));+#12614 = VECTOR('',#12615,1.);+#12615 = DIRECTION('',(0.,-1.));+#12616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12617 = PCURVE('',#3327,#12618);+#12618 = DEFINITIONAL_REPRESENTATION('',(#12619),#12623);+#12619 = LINE('',#12620,#12621);+#12620 = CARTESIAN_POINT('',(-4.9999993389E-02,-9.314404469578E-02));+#12621 = VECTOR('',#12622,1.);+#12622 = DIRECTION('',(0.,1.));+#12623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12624 = ORIENTED_EDGE('',*,*,#10597,.T.);+#12625 = ORIENTED_EDGE('',*,*,#12577,.F.);+#12626 = ADVANCED_FACE('',(#12627),#3327,.F.);+#12627 = FACE_BOUND('',#12628,.F.);+#12628 = EDGE_LOOP('',(#12629,#12630,#12651,#12652));+#12629 = ORIENTED_EDGE('',*,*,#3311,.T.);+#12630 = ORIENTED_EDGE('',*,*,#12631,.T.);+#12631 = EDGE_CURVE('',#3284,#10621,#12632,.T.);+#12632 = SURFACE_CURVE('',#12633,(#12637,#12644),.PCURVE_S1.);+#12633 = LINE('',#12634,#12635);+#12634 = CARTESIAN_POINT('',(3.424462032806,0.310692661501,0.));+#12635 = VECTOR('',#12636,1.);+#12636 = DIRECTION('',(0.,0.,1.));+#12637 = PCURVE('',#3327,#12638);+#12638 = DEFINITIONAL_REPRESENTATION('',(#12639),#12643);+#12639 = LINE('',#12640,#12641);+#12640 = CARTESIAN_POINT('',(7.4999999997E-02,-9.314404469578E-02));+#12641 = VECTOR('',#12642,1.);+#12642 = DIRECTION('',(0.,1.));+#12643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12644 = PCURVE('',#3299,#12645);+#12645 = DEFINITIONAL_REPRESENTATION('',(#12646),#12650);+#12646 = LINE('',#12647,#12648);+#12647 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12648 = VECTOR('',#12649,1.);+#12649 = DIRECTION('',(0.,1.));+#12650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12651 = ORIENTED_EDGE('',*,*,#10620,.F.);+#12652 = ORIENTED_EDGE('',*,*,#12604,.F.);+#12653 = ADVANCED_FACE('',(#12654),#3299,.F.);+#12654 = FACE_BOUND('',#12655,.F.);+#12655 = EDGE_LOOP('',(#12656,#12657,#12658,#12659));+#12656 = ORIENTED_EDGE('',*,*,#8546,.T.);+#12657 = ORIENTED_EDGE('',*,*,#10643,.T.);+#12658 = ORIENTED_EDGE('',*,*,#12631,.F.);+#12659 = ORIENTED_EDGE('',*,*,#3283,.T.);+#12660 = ADVANCED_FACE('',(#12661),#1132,.F.);+#12661 = FACE_BOUND('',#12662,.F.);+#12662 = EDGE_LOOP('',(#12663,#12664,#12665,#12686));+#12663 = ORIENTED_EDGE('',*,*,#8932,.F.);+#12664 = ORIENTED_EDGE('',*,*,#1116,.T.);+#12665 = ORIENTED_EDGE('',*,*,#12666,.T.);+#12666 = EDGE_CURVE('',#1089,#10742,#12667,.T.);+#12667 = SURFACE_CURVE('',#12668,(#12672,#12679),.PCURVE_S1.);+#12668 = LINE('',#12669,#12670);+#12669 = CARTESIAN_POINT('',(3.424462039427,3.010692661496,0.));+#12670 = VECTOR('',#12671,1.);+#12671 = DIRECTION('',(0.,0.,1.));+#12672 = PCURVE('',#1132,#12673);+#12673 = DEFINITIONAL_REPRESENTATION('',(#12674),#12678);+#12674 = LINE('',#12675,#12676);+#12675 = CARTESIAN_POINT('',(8.276472678267E-02,-9.314404469578E-02));+#12676 = VECTOR('',#12677,1.);+#12677 = DIRECTION('',(0.,1.));+#12678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12679 = PCURVE('',#1104,#12680);+#12680 = DEFINITIONAL_REPRESENTATION('',(#12681),#12685);+#12681 = LINE('',#12682,#12683);+#12682 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12683 = VECTOR('',#12684,1.);+#12684 = DIRECTION('',(0.,1.));+#12685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12686 = ORIENTED_EDGE('',*,*,#10741,.T.);+#12687 = ADVANCED_FACE('',(#12688),#1104,.F.);+#12688 = FACE_BOUND('',#12689,.F.);+#12689 = EDGE_LOOP('',(#12690,#12691,#12712,#12713));+#12690 = ORIENTED_EDGE('',*,*,#1088,.T.);+#12691 = ORIENTED_EDGE('',*,*,#12692,.F.);+#12692 = EDGE_CURVE('',#10765,#1056,#12693,.T.);+#12693 = SURFACE_CURVE('',#12694,(#12698,#12705),.PCURVE_S1.);+#12694 = LINE('',#12695,#12696);+#12695 = CARTESIAN_POINT('',(2.724462046017,3.010692661495,+ 9.314404469578E-02));+#12696 = VECTOR('',#12697,1.);+#12697 = DIRECTION('',(-2.360045235246E-12,0.,-1.));+#12698 = PCURVE('',#1104,#12699);+#12699 = DEFINITIONAL_REPRESENTATION('',(#12700),#12704);+#12700 = LINE('',#12701,#12702);+#12701 = CARTESIAN_POINT('',(0.69999999341,0.));+#12702 = VECTOR('',#12703,1.);+#12703 = DIRECTION('',(2.360045235246E-12,-1.));+#12704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12705 = PCURVE('',#1076,#12706);+#12706 = DEFINITIONAL_REPRESENTATION('',(#12707),#12711);+#12707 = LINE('',#12708,#12709);+#12708 = CARTESIAN_POINT('',(3.141592653606,1.416048219723E-23));+#12709 = VECTOR('',#12710,1.);+#12710 = DIRECTION('',(-1.888036188196E-11,1.));+#12711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12712 = ORIENTED_EDGE('',*,*,#10764,.F.);+#12713 = ORIENTED_EDGE('',*,*,#12666,.F.);+#12714 = ADVANCED_FACE('',(#12715),#1076,.F.);+#12715 = FACE_BOUND('',#12716,.F.);+#12716 = EDGE_LOOP('',(#12717,#12718,#12739,#12740));+#12717 = ORIENTED_EDGE('',*,*,#1053,.F.);+#12718 = ORIENTED_EDGE('',*,*,#12719,.T.);+#12719 = EDGE_CURVE('',#1054,#10788,#12720,.T.);+#12720 = SURFACE_CURVE('',#12721,(#12725,#12732),.PCURVE_S1.);+#12721 = LINE('',#12722,#12723);+#12722 = CARTESIAN_POINT('',(2.724462046003,2.760692661498,0.));+#12723 = VECTOR('',#12724,1.);+#12724 = DIRECTION('',(-1.067980066051E-11,0.,1.));+#12725 = PCURVE('',#1076,#12726);+#12726 = DEFINITIONAL_REPRESENTATION('',(#12727),#12731);+#12727 = LINE('',#12728,#12729);+#12728 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#12729 = VECTOR('',#12730,1.);+#12730 = DIRECTION('',(0.,-1.));+#12731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12732 = PCURVE('',#3666,#12733);+#12733 = DEFINITIONAL_REPRESENTATION('',(#12734),#12738);+#12734 = LINE('',#12735,#12736);+#12735 = CARTESIAN_POINT('',(-0.624999986806,-9.314404469578E-02));+#12736 = VECTOR('',#12737,1.);+#12737 = DIRECTION('',(-1.067980066051E-11,1.));+#12738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12739 = ORIENTED_EDGE('',*,*,#10787,.T.);+#12740 = ORIENTED_EDGE('',*,*,#12692,.T.);+#12741 = ADVANCED_FACE('',(#12742),#3666,.F.);+#12742 = FACE_BOUND('',#12743,.F.);+#12743 = EDGE_LOOP('',(#12744,#12745,#12766,#12767));+#12744 = ORIENTED_EDGE('',*,*,#3652,.T.);+#12745 = ORIENTED_EDGE('',*,*,#12746,.T.);+#12746 = EDGE_CURVE('',#3625,#10816,#12747,.T.);+#12747 = SURFACE_CURVE('',#12748,(#12752,#12759),.PCURVE_S1.);+#12748 = LINE('',#12749,#12750);+#12749 = CARTESIAN_POINT('',(3.424462039427,2.760692661499,0.));+#12750 = VECTOR('',#12751,1.);+#12751 = DIRECTION('',(0.,0.,1.));+#12752 = PCURVE('',#3666,#12753);+#12753 = DEFINITIONAL_REPRESENTATION('',(#12754),#12758);+#12754 = LINE('',#12755,#12756);+#12755 = CARTESIAN_POINT('',(7.5000006618E-02,-9.314404469578E-02));+#12756 = VECTOR('',#12757,1.);+#12757 = DIRECTION('',(0.,1.));+#12758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12759 = PCURVE('',#3640,#12760);+#12760 = DEFINITIONAL_REPRESENTATION('',(#12761),#12765);+#12761 = LINE('',#12762,#12763);+#12762 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#12763 = VECTOR('',#12764,1.);+#12764 = DIRECTION('',(0.,1.));+#12765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12766 = ORIENTED_EDGE('',*,*,#10815,.F.);+#12767 = ORIENTED_EDGE('',*,*,#12719,.F.);+#12768 = ADVANCED_FACE('',(#12769),#3640,.F.);+#12769 = FACE_BOUND('',#12770,.F.);+#12770 = EDGE_LOOP('',(#12771,#12772,#12773,#12774));+#12771 = ORIENTED_EDGE('',*,*,#9090,.T.);+#12772 = ORIENTED_EDGE('',*,*,#10838,.T.);+#12773 = ORIENTED_EDGE('',*,*,#12746,.F.);+#12774 = ORIENTED_EDGE('',*,*,#3624,.T.);+#12775 = ADVANCED_FACE('',(#12776),#1585,.F.);+#12776 = FACE_BOUND('',#12777,.F.);+#12777 = EDGE_LOOP('',(#12778,#12779,#12780,#12803));+#12778 = ORIENTED_EDGE('',*,*,#8572,.F.);+#12779 = ORIENTED_EDGE('',*,*,#1569,.F.);+#12780 = ORIENTED_EDGE('',*,*,#12781,.F.);+#12781 = EDGE_CURVE('',#12782,#1542,#12784,.T.);+#12782 = VERTEX_POINT('',#12783);+#12783 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+ 9.314404469578E-02));+#12784 = SURFACE_CURVE('',#12785,(#12789,#12796),.PCURVE_S1.);+#12785 = LINE('',#12786,#12787);+#12786 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+ 9.314404469578E-02));+#12787 = VECTOR('',#12788,1.);+#12788 = DIRECTION('',(0.,0.,-1.));+#12789 = PCURVE('',#1585,#12790);+#12790 = DEFINITIONAL_REPRESENTATION('',(#12791),#12795);+#12791 = LINE('',#12792,#12793);+#12792 = CARTESIAN_POINT('',(-2.235504117324E-12,0.));+#12793 = VECTOR('',#12794,1.);+#12794 = DIRECTION('',(0.,1.));+#12795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12796 = PCURVE('',#1557,#12797);+#12797 = DEFINITIONAL_REPRESENTATION('',(#12798),#12802);+#12798 = LINE('',#12799,#12800);+#12799 = CARTESIAN_POINT('',(-6.619000014751E-09,0.));+#12800 = VECTOR('',#12801,1.);+#12801 = DIRECTION('',(0.,-1.));+#12802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12803 = ORIENTED_EDGE('',*,*,#12804,.T.);+#12804 = EDGE_CURVE('',#12782,#8573,#12805,.T.);+#12805 = SURFACE_CURVE('',#12806,(#12810,#12817),.PCURVE_S1.);+#12806 = LINE('',#12807,#12808);+#12807 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+ 9.314404469578E-02));+#12808 = VECTOR('',#12809,1.);+#12809 = DIRECTION('',(0.906183139987,-0.422885465348,0.));+#12810 = PCURVE('',#1585,#12811);+#12811 = DEFINITIONAL_REPRESENTATION('',(#12812),#12816);+#12812 = LINE('',#12813,#12814);+#12813 = CARTESIAN_POINT('',(-2.235504117324E-12,0.));+#12814 = VECTOR('',#12815,1.);+#12815 = DIRECTION('',(1.,0.));+#12816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12817 = PCURVE('',#8611,#12818);+#12818 = DEFINITIONAL_REPRESENTATION('',(#12819),#12823);+#12819 = LINE('',#12820,#12821);+#12820 = CARTESIAN_POINT('',(0.392972657348,6.5302677635E-02));+#12821 = VECTOR('',#12822,1.);+#12822 = DIRECTION('',(0.906183139987,-0.422885465348));+#12823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12824 = ADVANCED_FACE('',(#12825),#1557,.F.);+#12825 = FACE_BOUND('',#12826,.F.);+#12826 = EDGE_LOOP('',(#12827,#12828,#12851,#12872));+#12827 = ORIENTED_EDGE('',*,*,#1541,.T.);+#12828 = ORIENTED_EDGE('',*,*,#12829,.T.);+#12829 = EDGE_CURVE('',#1514,#12830,#12832,.T.);+#12830 = VERTEX_POINT('',#12831);+#12831 = CARTESIAN_POINT('',(3.29946203942,4.260692661496,+ 9.314404469578E-02));+#12832 = SURFACE_CURVE('',#12833,(#12837,#12844),.PCURVE_S1.);+#12833 = LINE('',#12834,#12835);+#12834 = CARTESIAN_POINT('',(3.29946203942,4.260692661496,0.));+#12835 = VECTOR('',#12836,1.);+#12836 = DIRECTION('',(0.,0.,1.));+#12837 = PCURVE('',#1557,#12838);+#12838 = DEFINITIONAL_REPRESENTATION('',(#12839),#12843);+#12839 = LINE('',#12840,#12841);+#12840 = CARTESIAN_POINT('',(0.124999993386,-9.314404469578E-02));+#12841 = VECTOR('',#12842,1.);+#12842 = DIRECTION('',(0.,1.));+#12843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12844 = PCURVE('',#1529,#12845);+#12845 = DEFINITIONAL_REPRESENTATION('',(#12846),#12850);+#12846 = LINE('',#12847,#12848);+#12847 = CARTESIAN_POINT('',(0.124999999999,9.314404469578E-02));+#12848 = VECTOR('',#12849,1.);+#12849 = DIRECTION('',(0.,-1.));+#12850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12851 = ORIENTED_EDGE('',*,*,#12852,.F.);+#12852 = EDGE_CURVE('',#12782,#12830,#12853,.T.);+#12853 = SURFACE_CURVE('',#12854,(#12858,#12865),.PCURVE_S1.);+#12854 = LINE('',#12855,#12856);+#12855 = CARTESIAN_POINT('',(3.424462039425,4.260692661496,+ 9.314404469578E-02));+#12856 = VECTOR('',#12857,1.);+#12857 = DIRECTION('',(-1.,0.,0.));+#12858 = PCURVE('',#1557,#12859);+#12859 = DEFINITIONAL_REPRESENTATION('',(#12860),#12864);+#12860 = LINE('',#12861,#12862);+#12861 = CARTESIAN_POINT('',(-6.619000014751E-09,0.));+#12862 = VECTOR('',#12863,1.);+#12863 = DIRECTION('',(1.,0.));+#12864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12865 = PCURVE('',#8611,#12866);+#12866 = DEFINITIONAL_REPRESENTATION('',(#12867),#12871);+#12867 = LINE('',#12868,#12869);+#12868 = CARTESIAN_POINT('',(0.392972657348,6.5302677635E-02));+#12869 = VECTOR('',#12870,1.);+#12870 = DIRECTION('',(-1.,0.));+#12871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12872 = ORIENTED_EDGE('',*,*,#12781,.T.);+#12873 = ADVANCED_FACE('',(#12874),#1529,.F.);+#12874 = FACE_BOUND('',#12875,.F.);+#12875 = EDGE_LOOP('',(#12876,#12877,#12900,#12921));+#12876 = ORIENTED_EDGE('',*,*,#1513,.F.);+#12877 = ORIENTED_EDGE('',*,*,#12878,.T.);+#12878 = EDGE_CURVE('',#1486,#12879,#12881,.T.);+#12879 = VERTEX_POINT('',#12880);+#12880 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,+ 9.314404469578E-02));+#12881 = SURFACE_CURVE('',#12882,(#12886,#12893),.PCURVE_S1.);+#12882 = LINE('',#12883,#12884);+#12883 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,0.));+#12884 = VECTOR('',#12885,1.);+#12885 = DIRECTION('',(0.,0.,1.));+#12886 = PCURVE('',#1529,#12887);+#12887 = DEFINITIONAL_REPRESENTATION('',(#12888),#12892);+#12888 = LINE('',#12889,#12890);+#12889 = CARTESIAN_POINT('',(1.000088900582E-12,9.314404469578E-02));+#12890 = VECTOR('',#12891,1.);+#12891 = DIRECTION('',(0.,-1.));+#12892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12893 = PCURVE('',#1501,#12894);+#12894 = DEFINITIONAL_REPRESENTATION('',(#12895),#12899);+#12895 = LINE('',#12896,#12897);+#12896 = CARTESIAN_POINT('',(4.9999993389E-02,-9.314404469578E-02));+#12897 = VECTOR('',#12898,1.);+#12898 = DIRECTION('',(0.,1.));+#12899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12900 = ORIENTED_EDGE('',*,*,#12901,.T.);+#12901 = EDGE_CURVE('',#12879,#12830,#12902,.T.);+#12902 = SURFACE_CURVE('',#12903,(#12907,#12914),.PCURVE_S1.);+#12903 = LINE('',#12904,#12905);+#12904 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,+ 9.314404469578E-02));+#12905 = VECTOR('',#12906,1.);+#12906 = DIRECTION('',(0.,-1.,0.));+#12907 = PCURVE('',#1529,#12908);+#12908 = DEFINITIONAL_REPRESENTATION('',(#12909),#12913);+#12909 = LINE('',#12910,#12911);+#12910 = CARTESIAN_POINT('',(1.000088900582E-12,0.));+#12911 = VECTOR('',#12912,1.);+#12912 = DIRECTION('',(1.,0.));+#12913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12914 = PCURVE('',#8611,#12915);+#12915 = DEFINITIONAL_REPRESENTATION('',(#12916),#12920);+#12916 = LINE('',#12917,#12918);+#12917 = CARTESIAN_POINT('',(0.267972657343,0.190302677633));+#12918 = VECTOR('',#12919,1.);+#12919 = DIRECTION('',(0.,-1.));+#12920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12921 = ORIENTED_EDGE('',*,*,#12829,.F.);+#12922 = ADVANCED_FACE('',(#12923),#1501,.F.);+#12923 = FACE_BOUND('',#12924,.F.);+#12924 = EDGE_LOOP('',(#12925,#12926,#12949,#12970));+#12925 = ORIENTED_EDGE('',*,*,#1485,.T.);+#12926 = ORIENTED_EDGE('',*,*,#12927,.F.);+#12927 = EDGE_CURVE('',#12928,#1453,#12930,.T.);+#12928 = VERTEX_POINT('',#12929);+#12929 = CARTESIAN_POINT('',(2.674462039417,4.385692661494,+ 9.314404469578E-02));+#12930 = SURFACE_CURVE('',#12931,(#12935,#12942),.PCURVE_S1.);+#12931 = LINE('',#12932,#12933);+#12932 = CARTESIAN_POINT('',(2.674462039417,4.385692661494,+ 9.314404469578E-02));+#12933 = VECTOR('',#12934,1.);+#12934 = DIRECTION('',(-2.383884076006E-14,0.,-1.));+#12935 = PCURVE('',#1501,#12936);+#12936 = DEFINITIONAL_REPRESENTATION('',(#12937),#12941);+#12937 = LINE('',#12938,#12939);+#12938 = CARTESIAN_POINT('',(0.674999993392,0.));+#12939 = VECTOR('',#12940,1.);+#12940 = DIRECTION('',(2.383884076006E-14,-1.));+#12941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12942 = PCURVE('',#1473,#12943);+#12943 = DEFINITIONAL_REPRESENTATION('',(#12944),#12948);+#12944 = LINE('',#12945,#12946);+#12945 = CARTESIAN_POINT('',(7.068583470577,0.));+#12946 = VECTOR('',#12947,1.);+#12947 = DIRECTION('',(-2.574594802086E-13,1.));+#12948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12949 = ORIENTED_EDGE('',*,*,#12950,.F.);+#12950 = EDGE_CURVE('',#12879,#12928,#12951,.T.);+#12951 = SURFACE_CURVE('',#12952,(#12956,#12963),.PCURVE_S1.);+#12952 = LINE('',#12953,#12954);+#12953 = CARTESIAN_POINT('',(3.29946203942,4.385692661494,+ 9.314404469578E-02));+#12954 = VECTOR('',#12955,1.);+#12955 = DIRECTION('',(-1.,0.,0.));+#12956 = PCURVE('',#1501,#12957);+#12957 = DEFINITIONAL_REPRESENTATION('',(#12958),#12962);+#12958 = LINE('',#12959,#12960);+#12959 = CARTESIAN_POINT('',(4.9999993389E-02,0.));+#12960 = VECTOR('',#12961,1.);+#12961 = DIRECTION('',(1.,0.));+#12962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12963 = PCURVE('',#8611,#12964);+#12964 = DEFINITIONAL_REPRESENTATION('',(#12965),#12969);+#12965 = LINE('',#12966,#12967);+#12966 = CARTESIAN_POINT('',(0.267972657343,0.190302677633));+#12967 = VECTOR('',#12968,1.);+#12968 = DIRECTION('',(-1.,0.));+#12969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12970 = ORIENTED_EDGE('',*,*,#12878,.F.);+#12971 = ADVANCED_FACE('',(#12972),#1473,.F.);+#12972 = FACE_BOUND('',#12973,.F.);+#12973 = EDGE_LOOP('',(#12974,#12975,#12998,#13024));+#12974 = ORIENTED_EDGE('',*,*,#1452,.F.);+#12975 = ORIENTED_EDGE('',*,*,#12976,.T.);+#12976 = EDGE_CURVE('',#1425,#12977,#12979,.T.);+#12977 = VERTEX_POINT('',#12978);+#12978 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,+ 9.314404469578E-02));+#12979 = SURFACE_CURVE('',#12980,(#12984,#12991),.PCURVE_S1.);+#12980 = LINE('',#12981,#12982);+#12981 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,0.));+#12982 = VECTOR('',#12983,1.);+#12983 = DIRECTION('',(0.,0.,1.));+#12984 = PCURVE('',#1473,#12985);+#12985 = DEFINITIONAL_REPRESENTATION('',(#12986),#12990);+#12986 = LINE('',#12987,#12988);+#12987 = CARTESIAN_POINT('',(5.497787143782,9.314404469578E-02));+#12988 = VECTOR('',#12989,1.);+#12989 = DIRECTION('',(0.,-1.));+#12990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12991 = PCURVE('',#1440,#12992);+#12992 = DEFINITIONAL_REPRESENTATION('',(#12993),#12997);+#12993 = LINE('',#12994,#12995);+#12994 = CARTESIAN_POINT('',(0.200000000002,-9.314404469578E-02));+#12995 = VECTOR('',#12996,1.);+#12996 = DIRECTION('',(0.,1.));+#12997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12998 = ORIENTED_EDGE('',*,*,#12999,.T.);+#12999 = EDGE_CURVE('',#12977,#12928,#13000,.T.);+#13000 = SURFACE_CURVE('',#13001,(#13006,#13013),.PCURVE_S1.);+#13001 = CIRCLE('',#13002,0.1);+#13002 = AXIS2_PLACEMENT_3D('',#13003,#13004,#13005);+#13003 = CARTESIAN_POINT('',(2.674462039417,4.285692661494,+ 9.314404469578E-02));+#13004 = DIRECTION('',(0.,0.,-1.));+#13005 = DIRECTION('',(-1.,0.,0.));+#13006 = PCURVE('',#1473,#13007);+#13007 = DEFINITIONAL_REPRESENTATION('',(#13008),#13012);+#13008 = LINE('',#13009,#13010);+#13009 = CARTESIAN_POINT('',(5.497787143782,0.));+#13010 = VECTOR('',#13011,1.);+#13011 = DIRECTION('',(1.,0.));+#13012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13013 = PCURVE('',#8611,#13014);+#13014 = DEFINITIONAL_REPRESENTATION('',(#13015),#13023);+#13015 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13016,#13017,#13018,#13019+ ,#13020,#13021,#13022),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13016 = CARTESIAN_POINT('',(-0.45702734266,9.0302677633E-02));+#13017 = CARTESIAN_POINT('',(-0.45702734266,0.26350775839));+#13018 = CARTESIAN_POINT('',(-0.30702734266,0.176905218011));+#13019 = CARTESIAN_POINT('',(-0.15702734266,9.0302677633E-02));+#13020 = CARTESIAN_POINT('',(-0.30702734266,3.700137254556E-03));+#13021 = CARTESIAN_POINT('',(-0.45702734266,-8.290240312389E-02));+#13022 = CARTESIAN_POINT('',(-0.45702734266,9.0302677633E-02));+#13023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13024 = ORIENTED_EDGE('',*,*,#12927,.T.);+#13025 = ADVANCED_FACE('',(#13026),#1440,.F.);+#13026 = FACE_BOUND('',#13027,.F.);+#13027 = EDGE_LOOP('',(#13028,#13029,#13052,#13073));+#13028 = ORIENTED_EDGE('',*,*,#1424,.T.);+#13029 = ORIENTED_EDGE('',*,*,#13030,.F.);+#13030 = EDGE_CURVE('',#13031,#1392,#13033,.T.);+#13031 = VERTEX_POINT('',#13032);+#13032 = CARTESIAN_POINT('',(2.574462039417,4.110692661494,+ 9.314404469578E-02));+#13033 = SURFACE_CURVE('',#13034,(#13038,#13045),.PCURVE_S1.);+#13034 = LINE('',#13035,#13036);+#13035 = CARTESIAN_POINT('',(2.574462039417,4.110692661494,+ 9.314404469578E-02));+#13036 = VECTOR('',#13037,1.);+#13037 = DIRECTION('',(0.,1.696371908486E-11,-1.));+#13038 = PCURVE('',#1440,#13039);+#13039 = DEFINITIONAL_REPRESENTATION('',(#13040),#13044);+#13040 = LINE('',#13041,#13042);+#13041 = CARTESIAN_POINT('',(0.375000000002,0.));+#13042 = VECTOR('',#13043,1.);+#13043 = DIRECTION('',(-1.696371908486E-11,-1.));+#13044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13045 = PCURVE('',#1412,#13046);+#13046 = DEFINITIONAL_REPRESENTATION('',(#13047),#13051);+#13047 = LINE('',#13048,#13049);+#13048 = CARTESIAN_POINT('',(1.570796326765,0.));+#13049 = VECTOR('',#13050,1.);+#13050 = DIRECTION('',(1.696371908486E-10,1.));+#13051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13052 = ORIENTED_EDGE('',*,*,#13053,.F.);+#13053 = EDGE_CURVE('',#12977,#13031,#13054,.T.);+#13054 = SURFACE_CURVE('',#13055,(#13059,#13066),.PCURVE_S1.);+#13055 = LINE('',#13056,#13057);+#13056 = CARTESIAN_POINT('',(2.574462039417,4.285692661494,+ 9.314404469578E-02));+#13057 = VECTOR('',#13058,1.);+#13058 = DIRECTION('',(-1.304353450645E-12,-1.,0.));+#13059 = PCURVE('',#1440,#13060);+#13060 = DEFINITIONAL_REPRESENTATION('',(#13061),#13065);+#13061 = LINE('',#13062,#13063);+#13062 = CARTESIAN_POINT('',(0.200000000002,0.));+#13063 = VECTOR('',#13064,1.);+#13064 = DIRECTION('',(1.,0.));+#13065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13066 = PCURVE('',#8611,#13067);+#13067 = DEFINITIONAL_REPRESENTATION('',(#13068),#13072);+#13068 = LINE('',#13069,#13070);+#13069 = CARTESIAN_POINT('',(-0.45702734266,9.0302677633E-02));+#13070 = VECTOR('',#13071,1.);+#13071 = DIRECTION('',(-1.304353450645E-12,-1.));+#13072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13073 = ORIENTED_EDGE('',*,*,#12976,.F.);+#13074 = ADVANCED_FACE('',(#13075),#1412,.F.);+#13075 = FACE_BOUND('',#13076,.F.);+#13076 = EDGE_LOOP('',(#13077,#13078,#13101,#13127));+#13077 = ORIENTED_EDGE('',*,*,#1391,.F.);+#13078 = ORIENTED_EDGE('',*,*,#13079,.T.);+#13079 = EDGE_CURVE('',#1364,#13080,#13082,.T.);+#13080 = VERTEX_POINT('',#13081);+#13081 = CARTESIAN_POINT('',(2.674462039368,4.010692661494,+ 9.314404469578E-02));+#13082 = SURFACE_CURVE('',#13083,(#13087,#13094),.PCURVE_S1.);+#13083 = LINE('',#13084,#13085);+#13084 = CARTESIAN_POINT('',(2.674462039407,4.010692661498,0.));+#13085 = VECTOR('',#13086,1.);+#13086 = DIRECTION('',(-4.653818493178E-11,0.,1.));+#13087 = PCURVE('',#1412,#13088);+#13088 = DEFINITIONAL_REPRESENTATION('',(#13089),#13093);+#13089 = LINE('',#13090,#13091);+#13090 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#13091 = VECTOR('',#13092,1.);+#13092 = DIRECTION('',(0.,-1.));+#13093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13094 = PCURVE('',#1379,#13095);+#13095 = DEFINITIONAL_REPRESENTATION('',(#13096),#13100);+#13096 = LINE('',#13097,#13098);+#13097 = CARTESIAN_POINT('',(-0.674999993402,-9.314404469578E-02));+#13098 = VECTOR('',#13099,1.);+#13099 = DIRECTION('',(-4.653818493178E-11,1.));+#13100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13101 = ORIENTED_EDGE('',*,*,#13102,.T.);+#13102 = EDGE_CURVE('',#13080,#13031,#13103,.T.);+#13103 = SURFACE_CURVE('',#13104,(#13109,#13116),.PCURVE_S1.);+#13104 = CIRCLE('',#13105,0.100000000003);+#13105 = AXIS2_PLACEMENT_3D('',#13106,#13107,#13108);+#13106 = CARTESIAN_POINT('',(2.67446203942,4.110692661497,+ 9.314404469578E-02));+#13107 = DIRECTION('',(0.,0.,-1.));+#13108 = DIRECTION('',(-5.162714700043E-10,-1.,-0.));+#13109 = PCURVE('',#1412,#13110);+#13110 = DEFINITIONAL_REPRESENTATION('',(#13111),#13115);+#13111 = LINE('',#13112,#13113);+#13112 = CARTESIAN_POINT('',(0.,0.));+#13113 = VECTOR('',#13114,1.);+#13114 = DIRECTION('',(1.,0.));+#13115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13116 = PCURVE('',#8611,#13117);+#13117 = DEFINITIONAL_REPRESENTATION('',(#13118),#13126);+#13118 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13119,#13120,#13121,#13122+ ,#13123,#13124,#13125),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13119 = CARTESIAN_POINT('',(-0.357027342709,-0.184697322367));+#13120 = CARTESIAN_POINT('',(-0.530232423471,-0.184697322278));+#13121 = CARTESIAN_POINT('',(-0.443629883012,-3.469732231779E-02));+#13122 = CARTESIAN_POINT('',(-0.357027342554,0.115302677642));+#13123 = CARTESIAN_POINT('',(-0.27042480225,-3.469732240721E-02));+#13124 = CARTESIAN_POINT('',(-0.183822261947,-0.184697322456));+#13125 = CARTESIAN_POINT('',(-0.357027342709,-0.184697322367));+#13126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13127 = ORIENTED_EDGE('',*,*,#13030,.T.);+#13128 = ADVANCED_FACE('',(#13129),#1379,.F.);+#13129 = FACE_BOUND('',#13130,.F.);+#13130 = EDGE_LOOP('',(#13131,#13132,#13155,#13176));+#13131 = ORIENTED_EDGE('',*,*,#1363,.T.);+#13132 = ORIENTED_EDGE('',*,*,#13133,.T.);+#13133 = EDGE_CURVE('',#1336,#13134,#13136,.T.);+#13134 = VERTEX_POINT('',#13135);+#13135 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,+ 9.314404469578E-02));+#13136 = SURFACE_CURVE('',#13137,(#13141,#13148),.PCURVE_S1.);+#13137 = LINE('',#13138,#13139);+#13138 = CARTESIAN_POINT('',(3.424462032806,4.010692661499,0.));+#13139 = VECTOR('',#13140,1.);+#13140 = DIRECTION('',(0.,0.,1.));+#13141 = PCURVE('',#1379,#13142);+#13142 = DEFINITIONAL_REPRESENTATION('',(#13143),#13147);+#13143 = LINE('',#13144,#13145);+#13144 = CARTESIAN_POINT('',(7.4999999997E-02,-9.314404469578E-02));+#13145 = VECTOR('',#13146,1.);+#13146 = DIRECTION('',(0.,1.));+#13147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13148 = PCURVE('',#1351,#13149);+#13149 = DEFINITIONAL_REPRESENTATION('',(#13150),#13154);+#13150 = LINE('',#13151,#13152);+#13151 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#13152 = VECTOR('',#13153,1.);+#13153 = DIRECTION('',(0.,1.));+#13154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13155 = ORIENTED_EDGE('',*,*,#13156,.F.);+#13156 = EDGE_CURVE('',#13080,#13134,#13157,.T.);+#13157 = SURFACE_CURVE('',#13158,(#13162,#13169),.PCURVE_S1.);+#13158 = LINE('',#13159,#13160);+#13159 = CARTESIAN_POINT('',(2.674462039402,4.010692661498,+ 9.314404469578E-02));+#13160 = VECTOR('',#13161,1.);+#13161 = DIRECTION('',(1.,2.257157443784E-12,0.));+#13162 = PCURVE('',#1379,#13163);+#13163 = DEFINITIONAL_REPRESENTATION('',(#13164),#13168);+#13164 = LINE('',#13165,#13166);+#13165 = CARTESIAN_POINT('',(-0.674999993407,0.));+#13166 = VECTOR('',#13167,1.);+#13167 = DIRECTION('',(1.,0.));+#13168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13169 = PCURVE('',#8611,#13170);+#13170 = DEFINITIONAL_REPRESENTATION('',(#13171),#13175);+#13171 = LINE('',#13172,#13173);+#13172 = CARTESIAN_POINT('',(-0.357027342675,-0.184697322363));+#13173 = VECTOR('',#13174,1.);+#13174 = DIRECTION('',(1.,2.257157443784E-12));+#13175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13176 = ORIENTED_EDGE('',*,*,#13079,.F.);+#13177 = ADVANCED_FACE('',(#13178),#1351,.F.);+#13178 = FACE_BOUND('',#13179,.F.);+#13179 = EDGE_LOOP('',(#13180,#13181,#13202,#13203));+#13180 = ORIENTED_EDGE('',*,*,#8730,.T.);+#13181 = ORIENTED_EDGE('',*,*,#13182,.T.);+#13182 = EDGE_CURVE('',#8708,#13134,#13183,.T.);+#13183 = SURFACE_CURVE('',#13184,(#13188,#13195),.PCURVE_S1.);+#13184 = LINE('',#13185,#13186);+#13185 = CARTESIAN_POINT('',(3.5,4.045943712856,9.314404469578E-02));+#13186 = VECTOR('',#13187,1.);+#13187 = DIRECTION('',(-0.906183139998,-0.422885465325,0.));+#13188 = PCURVE('',#1351,#13189);+#13189 = DEFINITIONAL_REPRESENTATION('',(#13190),#13194);+#13190 = LINE('',#13191,#13192);+#13191 = CARTESIAN_POINT('',(8.335838955724E-02,0.));+#13192 = VECTOR('',#13193,1.);+#13193 = DIRECTION('',(-1.,0.));+#13194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13195 = PCURVE('',#8611,#13196);+#13196 = DEFINITIONAL_REPRESENTATION('',(#13197),#13201);+#13197 = LINE('',#13198,#13199);+#13198 = CARTESIAN_POINT('',(0.468510617923,-0.149446271005));+#13199 = VECTOR('',#13200,1.);+#13200 = DIRECTION('',(-0.906183139998,-0.422885465325));+#13201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13202 = ORIENTED_EDGE('',*,*,#13133,.F.);+#13203 = ORIENTED_EDGE('',*,*,#1335,.T.);+#13204 = ADVANCED_FACE('',(#13205),#8611,.F.);+#13205 = FACE_BOUND('',#13206,.F.);+#13206 = EDGE_LOOP('',(#13207,#13208,#13231,#13259,#13280,#13281,#13282,+ #13283,#13284,#13285,#13286,#13287,#13288,#13289));+#13207 = ORIENTED_EDGE('',*,*,#8707,.T.);+#13208 = ORIENTED_EDGE('',*,*,#13209,.T.);+#13209 = EDGE_CURVE('',#8680,#13210,#13212,.T.);+#13210 = VERTEX_POINT('',#13211);+#13211 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+ 9.314404469578E-02));+#13212 = SURFACE_CURVE('',#13213,(#13217,#13224),.PCURVE_S1.);+#13213 = LINE('',#13214,#13215);+#13214 = CARTESIAN_POINT('',(3.5,4.095983918047,9.314404469578E-02));+#13215 = VECTOR('',#13216,1.);+#13216 = DIRECTION('',(-1.,0.,0.));+#13217 = PCURVE('',#8611,#13218);+#13218 = DEFINITIONAL_REPRESENTATION('',(#13219),#13223);+#13219 = LINE('',#13220,#13221);+#13220 = CARTESIAN_POINT('',(0.468510617923,-9.9406065814E-02));+#13221 = VECTOR('',#13222,1.);+#13222 = DIRECTION('',(-1.,0.));+#13223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13224 = PCURVE('',#8695,#13225);+#13225 = DEFINITIONAL_REPRESENTATION('',(#13226),#13230);+#13226 = LINE('',#13227,#13228);+#13227 = CARTESIAN_POINT('',(6.0741328315E-02,0.1));+#13228 = VECTOR('',#13229,1.);+#13229 = DIRECTION('',(-1.,0.));+#13230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13231 = ORIENTED_EDGE('',*,*,#13232,.T.);+#13232 = EDGE_CURVE('',#13210,#13233,#13235,.T.);+#13233 = VERTEX_POINT('',#13234);+#13234 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+ 9.314404469578E-02));+#13235 = SURFACE_CURVE('',#13236,(#13240,#13247),.PCURVE_S1.);+#13236 = LINE('',#13237,#13238);+#13237 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+ 9.314404469578E-02));+#13238 = VECTOR('',#13239,1.);+#13239 = DIRECTION('',(0.,1.,0.));+#13240 = PCURVE('',#8611,#13241);+#13241 = DEFINITIONAL_REPRESENTATION('',(#13242),#13246);+#13242 = LINE('',#13243,#13244);+#13243 = CARTESIAN_POINT('',(0.415294252949,-9.9406065814E-02));+#13244 = VECTOR('',#13245,1.);+#13245 = DIRECTION('',(0.,1.));+#13246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13247 = PCURVE('',#13248,#13253);+#13248 = PLANE('',#13249);+#13249 = AXIS2_PLACEMENT_3D('',#13250,#13251,#13252);+#13250 = CARTESIAN_POINT('',(3.446783635026,3.503781429475,+ 0.193144044696));+#13251 = DIRECTION('',(1.,0.,0.));+#13252 = DIRECTION('',(-0.,1.,0.));+#13253 = DEFINITIONAL_REPRESENTATION('',(#13254),#13258);+#13254 = LINE('',#13255,#13256);+#13255 = CARTESIAN_POINT('',(0.592202488572,-0.1));+#13256 = VECTOR('',#13257,1.);+#13257 = DIRECTION('',(1.,0.));+#13258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13259 = ORIENTED_EDGE('',*,*,#13260,.T.);+#13260 = EDGE_CURVE('',#13233,#8596,#13261,.T.);+#13261 = SURFACE_CURVE('',#13262,(#13266,#13273),.PCURVE_S1.);+#13262 = LINE('',#13263,#13264);+#13263 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+ 9.314404469578E-02));+#13264 = VECTOR('',#13265,1.);+#13265 = DIRECTION('',(1.,-1.668994904344E-14,0.));+#13266 = PCURVE('',#8611,#13267);+#13267 = DEFINITIONAL_REPRESENTATION('',(#13268),#13272);+#13268 = LINE('',#13269,#13270);+#13269 = CARTESIAN_POINT('',(0.415294252949,-1.9406065816E-02));+#13270 = VECTOR('',#13271,1.);+#13271 = DIRECTION('',(1.,-1.668994904344E-14));+#13272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13273 = PCURVE('',#8639,#13274);+#13274 = DEFINITIONAL_REPRESENTATION('',(#13275),#13279);+#13275 = LINE('',#13276,#13277);+#13276 = CARTESIAN_POINT('',(0.127475036669,0.1));+#13277 = VECTOR('',#13278,1.);+#13278 = DIRECTION('',(-1.,-0.));+#13279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13280 = ORIENTED_EDGE('',*,*,#8595,.T.);+#13281 = ORIENTED_EDGE('',*,*,#12804,.F.);+#13282 = ORIENTED_EDGE('',*,*,#12852,.T.);+#13283 = ORIENTED_EDGE('',*,*,#12901,.F.);+#13284 = ORIENTED_EDGE('',*,*,#12950,.T.);+#13285 = ORIENTED_EDGE('',*,*,#12999,.F.);+#13286 = ORIENTED_EDGE('',*,*,#13053,.T.);+#13287 = ORIENTED_EDGE('',*,*,#13102,.F.);+#13288 = ORIENTED_EDGE('',*,*,#13156,.T.);+#13289 = ORIENTED_EDGE('',*,*,#13182,.F.);+#13290 = ADVANCED_FACE('',(#13291),#8695,.T.);+#13291 = FACE_BOUND('',#13292,.F.);+#13292 = EDGE_LOOP('',(#13293,#13294,#13317,#13338));+#13293 = ORIENTED_EDGE('',*,*,#8679,.F.);+#13294 = ORIENTED_EDGE('',*,*,#13295,.F.);+#13295 = EDGE_CURVE('',#13296,#8652,#13298,.T.);+#13296 = VERTEX_POINT('',#13297);+#13297 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+ 0.193144044696));+#13298 = SURFACE_CURVE('',#13299,(#13303,#13310),.PCURVE_S1.);+#13299 = LINE('',#13300,#13301);+#13300 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+ 0.193144044696));+#13301 = VECTOR('',#13302,1.);+#13302 = DIRECTION('',(1.,0.,0.));+#13303 = PCURVE('',#8695,#13304);+#13304 = DEFINITIONAL_REPRESENTATION('',(#13305),#13309);+#13305 = LINE('',#13306,#13307);+#13306 = CARTESIAN_POINT('',(7.524963341E-03,0.));+#13307 = VECTOR('',#13308,1.);+#13308 = DIRECTION('',(1.,0.));+#13309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13310 = PCURVE('',#8667,#13311);+#13311 = DEFINITIONAL_REPRESENTATION('',(#13312),#13316);+#13312 = LINE('',#13313,#13314);+#13313 = CARTESIAN_POINT('',(0.638353233598,8.6639084279E-02));+#13314 = VECTOR('',#13315,1.);+#13315 = DIRECTION('',(1.,0.));+#13316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13317 = ORIENTED_EDGE('',*,*,#13318,.T.);+#13318 = EDGE_CURVE('',#13296,#13210,#13319,.T.);+#13319 = SURFACE_CURVE('',#13320,(#13324,#13331),.PCURVE_S1.);+#13320 = LINE('',#13321,#13322);+#13321 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+ 0.193144044696));+#13322 = VECTOR('',#13323,1.);+#13323 = DIRECTION('',(0.,0.,-1.));+#13324 = PCURVE('',#8695,#13325);+#13325 = DEFINITIONAL_REPRESENTATION('',(#13326),#13330);+#13326 = LINE('',#13327,#13328);+#13327 = CARTESIAN_POINT('',(7.524963341E-03,0.));+#13328 = VECTOR('',#13329,1.);+#13329 = DIRECTION('',(0.,1.));+#13330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13331 = PCURVE('',#13248,#13332);+#13332 = DEFINITIONAL_REPRESENTATION('',(#13333),#13337);+#13333 = LINE('',#13334,#13335);+#13334 = CARTESIAN_POINT('',(0.592202488572,0.));+#13335 = VECTOR('',#13336,1.);+#13336 = DIRECTION('',(0.,-1.));+#13337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13338 = ORIENTED_EDGE('',*,*,#13209,.F.);+#13339 = ADVANCED_FACE('',(#13340),#8667,.F.);+#13340 = FACE_BOUND('',#13341,.F.);+#13341 = EDGE_LOOP('',(#13342,#13343,#13366,#13387));+#13342 = ORIENTED_EDGE('',*,*,#8651,.T.);+#13343 = ORIENTED_EDGE('',*,*,#13344,.F.);+#13344 = EDGE_CURVE('',#13345,#8624,#13347,.T.);+#13345 = VERTEX_POINT('',#13346);+#13346 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+ 0.193144044696));+#13347 = SURFACE_CURVE('',#13348,(#13352,#13359),.PCURVE_S1.);+#13348 = LINE('',#13349,#13350);+#13349 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+ 0.193144044696));+#13350 = VECTOR('',#13351,1.);+#13351 = DIRECTION('',(1.,0.,0.));+#13352 = PCURVE('',#8667,#13353);+#13353 = DEFINITIONAL_REPRESENTATION('',(#13354),#13358);+#13354 = LINE('',#13355,#13356);+#13355 = CARTESIAN_POINT('',(0.638353233598,0.166639084277));+#13356 = VECTOR('',#13357,1.);+#13357 = DIRECTION('',(1.,0.));+#13358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13359 = PCURVE('',#8639,#13360);+#13360 = DEFINITIONAL_REPRESENTATION('',(#13361),#13365);+#13361 = LINE('',#13362,#13363);+#13362 = CARTESIAN_POINT('',(0.127475036669,0.));+#13363 = VECTOR('',#13364,1.);+#13364 = DIRECTION('',(-1.,-0.));+#13365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13366 = ORIENTED_EDGE('',*,*,#13367,.F.);+#13367 = EDGE_CURVE('',#13296,#13345,#13368,.T.);+#13368 = SURFACE_CURVE('',#13369,(#13373,#13380),.PCURVE_S1.);+#13369 = LINE('',#13370,#13371);+#13370 = CARTESIAN_POINT('',(3.446783635026,4.095983918047,+ 0.193144044696));+#13371 = VECTOR('',#13372,1.);+#13372 = DIRECTION('',(0.,1.,0.));+#13373 = PCURVE('',#8667,#13374);+#13374 = DEFINITIONAL_REPRESENTATION('',(#13375),#13379);+#13375 = LINE('',#13376,#13377);+#13376 = CARTESIAN_POINT('',(0.638353233598,8.6639084279E-02));+#13377 = VECTOR('',#13378,1.);+#13378 = DIRECTION('',(0.,1.));+#13379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13380 = PCURVE('',#13248,#13381);+#13381 = DEFINITIONAL_REPRESENTATION('',(#13382),#13386);+#13382 = LINE('',#13383,#13384);+#13383 = CARTESIAN_POINT('',(0.592202488572,0.));+#13384 = VECTOR('',#13385,1.);+#13385 = DIRECTION('',(1.,0.));+#13386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13387 = ORIENTED_EDGE('',*,*,#13295,.T.);+#13388 = ADVANCED_FACE('',(#13389),#8639,.T.);+#13389 = FACE_BOUND('',#13390,.F.);+#13390 = EDGE_LOOP('',(#13391,#13392,#13393,#13414));+#13391 = ORIENTED_EDGE('',*,*,#8623,.T.);+#13392 = ORIENTED_EDGE('',*,*,#13260,.F.);+#13393 = ORIENTED_EDGE('',*,*,#13394,.F.);+#13394 = EDGE_CURVE('',#13345,#13233,#13395,.T.);+#13395 = SURFACE_CURVE('',#13396,(#13400,#13407),.PCURVE_S1.);+#13396 = LINE('',#13397,#13398);+#13397 = CARTESIAN_POINT('',(3.446783635026,4.175983918045,+ 0.193144044696));+#13398 = VECTOR('',#13399,1.);+#13399 = DIRECTION('',(0.,0.,-1.));+#13400 = PCURVE('',#8639,#13401);+#13401 = DEFINITIONAL_REPRESENTATION('',(#13402),#13406);+#13402 = LINE('',#13403,#13404);+#13403 = CARTESIAN_POINT('',(0.127475036669,0.));+#13404 = VECTOR('',#13405,1.);+#13405 = DIRECTION('',(0.,1.));+#13406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13407 = PCURVE('',#13248,#13408);+#13408 = DEFINITIONAL_REPRESENTATION('',(#13409),#13413);+#13409 = LINE('',#13410,#13411);+#13410 = CARTESIAN_POINT('',(0.67220248857,0.));+#13411 = VECTOR('',#13412,1.);+#13412 = DIRECTION('',(0.,-1.));+#13413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13414 = ORIENTED_EDGE('',*,*,#13344,.T.);+#13415 = ADVANCED_FACE('',(#13416),#13248,.T.);+#13416 = FACE_BOUND('',#13417,.F.);+#13417 = EDGE_LOOP('',(#13418,#13419,#13420,#13421));+#13418 = ORIENTED_EDGE('',*,*,#13394,.T.);+#13419 = ORIENTED_EDGE('',*,*,#13232,.F.);+#13420 = ORIENTED_EDGE('',*,*,#13318,.F.);+#13421 = ORIENTED_EDGE('',*,*,#13367,.T.);+#13422 = ADVANCED_FACE('',(#13423),#1300,.F.);+#13423 = FACE_BOUND('',#13424,.F.);+#13424 = EDGE_LOOP('',(#13425,#13426,#13427,#13450));+#13425 = ORIENTED_EDGE('',*,*,#8752,.F.);+#13426 = ORIENTED_EDGE('',*,*,#1284,.T.);+#13427 = ORIENTED_EDGE('',*,*,#13428,.T.);+#13428 = EDGE_CURVE('',#1257,#13429,#13431,.T.);+#13429 = VERTEX_POINT('',#13430);+#13430 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+ 9.314404469578E-02));+#13431 = SURFACE_CURVE('',#13432,(#13436,#13443),.PCURVE_S1.);+#13432 = LINE('',#13433,#13434);+#13433 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,0.));+#13434 = VECTOR('',#13435,1.);+#13435 = DIRECTION('',(0.,0.,1.));+#13436 = PCURVE('',#1300,#13437);+#13437 = DEFINITIONAL_REPRESENTATION('',(#13438),#13442);+#13438 = LINE('',#13439,#13440);+#13439 = CARTESIAN_POINT('',(8.276472678267E-02,-9.314404469578E-02));+#13440 = VECTOR('',#13441,1.);+#13441 = DIRECTION('',(0.,1.));+#13442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13443 = PCURVE('',#1272,#13444);+#13444 = DEFINITIONAL_REPRESENTATION('',(#13445),#13449);+#13445 = LINE('',#13446,#13447);+#13446 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#13447 = VECTOR('',#13448,1.);+#13448 = DIRECTION('',(0.,1.));+#13449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13450 = ORIENTED_EDGE('',*,*,#13451,.T.);+#13451 = EDGE_CURVE('',#13429,#8753,#13452,.T.);+#13452 = SURFACE_CURVE('',#13453,(#13457,#13464),.PCURVE_S1.);+#13453 = LINE('',#13454,#13455);+#13454 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+ 9.314404469578E-02));+#13455 = VECTOR('',#13456,1.);+#13456 = DIRECTION('',(0.906183139998,-0.422885465325,0.));+#13457 = PCURVE('',#1300,#13458);+#13458 = DEFINITIONAL_REPRESENTATION('',(#13459),#13463);+#13459 = LINE('',#13460,#13461);+#13460 = CARTESIAN_POINT('',(8.276472678267E-02,0.));+#13461 = VECTOR('',#13462,1.);+#13462 = DIRECTION('',(-1.,0.));+#13463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13464 = PCURVE('',#8791,#13465);+#13465 = DEFINITIONAL_REPRESENTATION('',(#13466),#13470);+#13466 = LINE('',#13467,#13468);+#13467 = CARTESIAN_POINT('',(0.343079345819,0.125000000003));+#13468 = VECTOR('',#13469,1.);+#13469 = DIRECTION('',(0.906183139998,-0.422885465325));+#13470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13471 = ADVANCED_FACE('',(#13472),#1272,.F.);+#13472 = FACE_BOUND('',#13473,.F.);+#13473 = EDGE_LOOP('',(#13474,#13475,#13498,#13519));+#13474 = ORIENTED_EDGE('',*,*,#1256,.T.);+#13475 = ORIENTED_EDGE('',*,*,#13476,.F.);+#13476 = EDGE_CURVE('',#13477,#1224,#13479,.T.);+#13477 = VERTEX_POINT('',#13478);+#13478 = CARTESIAN_POINT('',(2.724462046042,3.510692661495,+ 9.314404469578E-02));+#13479 = SURFACE_CURVE('',#13480,(#13484,#13491),.PCURVE_S1.);+#13480 = LINE('',#13481,#13482);+#13481 = CARTESIAN_POINT('',(2.724462046024,3.510692661497,+ 9.314404469578E-02));+#13482 = VECTOR('',#13483,1.);+#13483 = DIRECTION('',(-2.500217618915E-11,0.,-1.));+#13484 = PCURVE('',#1272,#13485);+#13485 = DEFINITIONAL_REPRESENTATION('',(#13486),#13490);+#13486 = LINE('',#13487,#13488);+#13487 = CARTESIAN_POINT('',(0.699999993403,0.));+#13488 = VECTOR('',#13489,1.);+#13489 = DIRECTION('',(2.500217618915E-11,-1.));+#13490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13491 = PCURVE('',#1244,#13492);+#13492 = DEFINITIONAL_REPRESENTATION('',(#13493),#13497);+#13493 = LINE('',#13494,#13495);+#13494 = CARTESIAN_POINT('',(3.141592653662,4.500347673624E-22));+#13495 = VECTOR('',#13496,1.);+#13496 = DIRECTION('',(-2.000174095132E-10,1.));+#13497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13498 = ORIENTED_EDGE('',*,*,#13499,.F.);+#13499 = EDGE_CURVE('',#13429,#13477,#13500,.T.);+#13500 = SURFACE_CURVE('',#13501,(#13505,#13512),.PCURVE_S1.);+#13501 = LINE('',#13502,#13503);+#13502 = CARTESIAN_POINT('',(3.424462039427,3.510692661498,+ 9.314404469578E-02));+#13503 = VECTOR('',#13504,1.);+#13504 = DIRECTION('',(-1.,-1.298643744472E-12,0.));+#13505 = PCURVE('',#1272,#13506);+#13506 = DEFINITIONAL_REPRESENTATION('',(#13507),#13511);+#13507 = LINE('',#13508,#13509);+#13508 = CARTESIAN_POINT('',(0.,0.));+#13509 = VECTOR('',#13510,1.);+#13510 = DIRECTION('',(1.,0.));+#13511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13512 = PCURVE('',#8791,#13513);+#13513 = DEFINITIONAL_REPRESENTATION('',(#13514),#13518);+#13514 = LINE('',#13515,#13516);+#13515 = CARTESIAN_POINT('',(0.343079345819,0.125000000003));+#13516 = VECTOR('',#13517,1.);+#13517 = DIRECTION('',(-1.,-1.298643744472E-12));+#13518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13519 = ORIENTED_EDGE('',*,*,#13428,.F.);+#13520 = ADVANCED_FACE('',(#13521),#1244,.F.);+#13521 = FACE_BOUND('',#13522,.F.);+#13522 = EDGE_LOOP('',(#13523,#13524,#13547,#13573));+#13523 = ORIENTED_EDGE('',*,*,#1223,.F.);+#13524 = ORIENTED_EDGE('',*,*,#13525,.T.);+#13525 = EDGE_CURVE('',#1196,#13526,#13528,.T.);+#13526 = VERTEX_POINT('',#13527);+#13527 = CARTESIAN_POINT('',(2.724462046042,3.260692661495,+ 9.314404469578E-02));+#13528 = SURFACE_CURVE('',#13529,(#13533,#13540),.PCURVE_S1.);+#13529 = LINE('',#13530,#13531);+#13530 = CARTESIAN_POINT('',(2.724462046022,3.260692661493,0.));+#13531 = VECTOR('',#13532,1.);+#13532 = DIRECTION('',(2.498310511654E-11,0.,1.));+#13533 = PCURVE('',#1244,#13534);+#13534 = DEFINITIONAL_REPRESENTATION('',(#13535),#13539);+#13535 = LINE('',#13536,#13537);+#13536 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#13537 = VECTOR('',#13538,1.);+#13538 = DIRECTION('',(0.,-1.));+#13539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13540 = PCURVE('',#1211,#13541);+#13541 = DEFINITIONAL_REPRESENTATION('',(#13542),#13546);+#13542 = LINE('',#13543,#13544);+#13543 = CARTESIAN_POINT('',(-0.62499999339,-9.314404469578E-02));+#13544 = VECTOR('',#13545,1.);+#13545 = DIRECTION('',(2.498310511654E-11,1.));+#13546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13547 = ORIENTED_EDGE('',*,*,#13548,.T.);+#13548 = EDGE_CURVE('',#13526,#13477,#13549,.T.);+#13549 = SURFACE_CURVE('',#13550,(#13555,#13562),.PCURVE_S1.);+#13550 = CIRCLE('',#13551,0.125);+#13551 = AXIS2_PLACEMENT_3D('',#13552,#13553,#13554);+#13552 = CARTESIAN_POINT('',(2.724462046015,3.385692661495,+ 9.314404469578E-02));+#13553 = DIRECTION('',(0.,0.,-1.));+#13554 = DIRECTION('',(2.217639405444E-10,-1.,0.));+#13555 = PCURVE('',#1244,#13556);+#13556 = DEFINITIONAL_REPRESENTATION('',(#13557),#13561);+#13557 = LINE('',#13558,#13559);+#13558 = CARTESIAN_POINT('',(0.,0.));+#13559 = VECTOR('',#13560,1.);+#13560 = DIRECTION('',(1.,0.));+#13561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13562 = PCURVE('',#8791,#13563);+#13563 = DEFINITIONAL_REPRESENTATION('',(#13564),#13572);+#13564 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13565,#13566,#13567,#13568+ ,#13569,#13570,#13571),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13565 = CARTESIAN_POINT('',(-0.356920647565,-0.125));+#13566 = CARTESIAN_POINT('',(-0.573426998511,-0.125000000048));+#13567 = CARTESIAN_POINT('',(-0.46517382308,6.249999997599E-02));+#13568 = CARTESIAN_POINT('',(-0.356920647648,0.25));+#13569 = CARTESIAN_POINT('',(-0.248667472134,6.250000002401E-02));+#13570 = CARTESIAN_POINT('',(-0.140414296619,-0.124999999952));+#13571 = CARTESIAN_POINT('',(-0.356920647565,-0.125));+#13572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13573 = ORIENTED_EDGE('',*,*,#13476,.T.);+#13574 = ADVANCED_FACE('',(#13575),#1211,.F.);+#13575 = FACE_BOUND('',#13576,.F.);+#13576 = EDGE_LOOP('',(#13577,#13578,#13601,#13622));+#13577 = ORIENTED_EDGE('',*,*,#1195,.T.);+#13578 = ORIENTED_EDGE('',*,*,#13579,.T.);+#13579 = EDGE_CURVE('',#1168,#13580,#13582,.T.);+#13580 = VERTEX_POINT('',#13581);+#13581 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,+ 9.314404469578E-02));+#13582 = SURFACE_CURVE('',#13583,(#13587,#13594),.PCURVE_S1.);+#13583 = LINE('',#13584,#13585);+#13584 = CARTESIAN_POINT('',(3.424462039427,3.260692661492,0.));+#13585 = VECTOR('',#13586,1.);+#13586 = DIRECTION('',(-1.430330445603E-14,0.,1.));+#13587 = PCURVE('',#1211,#13588);+#13588 = DEFINITIONAL_REPRESENTATION('',(#13589),#13593);+#13589 = LINE('',#13590,#13591);+#13590 = CARTESIAN_POINT('',(7.5000000015E-02,-9.314404469578E-02));+#13591 = VECTOR('',#13592,1.);+#13592 = DIRECTION('',(-1.430330445603E-14,1.));+#13593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13594 = PCURVE('',#1183,#13595);+#13595 = DEFINITIONAL_REPRESENTATION('',(#13596),#13600);+#13596 = LINE('',#13597,#13598);+#13597 = CARTESIAN_POINT('',(0.,-9.314404469578E-02));+#13598 = VECTOR('',#13599,1.);+#13599 = DIRECTION('',(-1.296141334371E-14,1.));+#13600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13601 = ORIENTED_EDGE('',*,*,#13602,.F.);+#13602 = EDGE_CURVE('',#13526,#13580,#13603,.T.);+#13603 = SURFACE_CURVE('',#13604,(#13608,#13615),.PCURVE_S1.);+#13604 = LINE('',#13605,#13606);+#13605 = CARTESIAN_POINT('',(2.724462046024,3.260692661493,+ 9.314404469578E-02));+#13606 = VECTOR('',#13607,1.);+#13607 = DIRECTION('',(1.,-1.301815810286E-12,0.));+#13608 = PCURVE('',#1211,#13609);+#13609 = DEFINITIONAL_REPRESENTATION('',(#13610),#13614);+#13610 = LINE('',#13611,#13612);+#13611 = CARTESIAN_POINT('',(-0.624999993388,0.));+#13612 = VECTOR('',#13613,1.);+#13613 = DIRECTION('',(1.,0.));+#13614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13615 = PCURVE('',#8791,#13616);+#13616 = DEFINITIONAL_REPRESENTATION('',(#13617),#13621);+#13617 = LINE('',#13618,#13619);+#13618 = CARTESIAN_POINT('',(-0.356920647584,-0.125000000002));+#13619 = VECTOR('',#13620,1.);+#13620 = DIRECTION('',(1.,-1.301815810286E-12));+#13621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13622 = ORIENTED_EDGE('',*,*,#13525,.F.);+#13623 = ADVANCED_FACE('',(#13624),#1183,.F.);+#13624 = FACE_BOUND('',#13625,.F.);+#13625 = EDGE_LOOP('',(#13626,#13627,#13648,#13649));+#13626 = ORIENTED_EDGE('',*,*,#8910,.T.);+#13627 = ORIENTED_EDGE('',*,*,#13628,.T.);+#13628 = EDGE_CURVE('',#8888,#13580,#13629,.T.);+#13629 = SURFACE_CURVE('',#13630,(#13634,#13641),.PCURVE_S1.);+#13630 = LINE('',#13631,#13632);+#13631 = CARTESIAN_POINT('',(3.5,3.295943709768,9.314404469578E-02));+#13632 = VECTOR('',#13633,1.);+#13633 = DIRECTION('',(-0.906183139956,-0.422885465415,0.));+#13634 = PCURVE('',#1183,#13635);+#13635 = DEFINITIONAL_REPRESENTATION('',(#13636),#13640);+#13636 = LINE('',#13637,#13638);+#13637 = CARTESIAN_POINT('',(8.335838225449E-02,0.));+#13638 = VECTOR('',#13639,1.);+#13639 = DIRECTION('',(-1.,0.));+#13640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13641 = PCURVE('',#8791,#13642);+#13642 = DEFINITIONAL_REPRESENTATION('',(#13643),#13647);+#13643 = LINE('',#13644,#13645);+#13644 = CARTESIAN_POINT('',(0.418617306392,-8.9748951727E-02));+#13645 = VECTOR('',#13646,1.);+#13646 = DIRECTION('',(-0.906183139956,-0.422885465415));+#13647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13648 = ORIENTED_EDGE('',*,*,#13579,.F.);+#13649 = ORIENTED_EDGE('',*,*,#1167,.T.);+#13650 = ADVANCED_FACE('',(#13651),#8791,.F.);+#13651 = FACE_BOUND('',#13652,.F.);+#13652 = EDGE_LOOP('',(#13653,#13654,#13677,#13705,#13726,#13727,#13728,+ #13729,#13730,#13731));+#13653 = ORIENTED_EDGE('',*,*,#8887,.T.);+#13654 = ORIENTED_EDGE('',*,*,#13655,.T.);+#13655 = EDGE_CURVE('',#8860,#13656,#13658,.T.);+#13656 = VERTEX_POINT('',#13657);+#13657 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+ 9.314404469578E-02));+#13658 = SURFACE_CURVE('',#13659,(#13663,#13670),.PCURVE_S1.);+#13659 = LINE('',#13660,#13661);+#13660 = CARTESIAN_POINT('',(3.5,3.345983916503,9.314404469578E-02));+#13661 = VECTOR('',#13662,1.);+#13662 = DIRECTION('',(-1.,0.,0.));+#13663 = PCURVE('',#8791,#13664);+#13664 = DEFINITIONAL_REPRESENTATION('',(#13665),#13669);+#13665 = LINE('',#13666,#13667);+#13666 = CARTESIAN_POINT('',(0.418617306392,-3.9708744992E-02));+#13667 = VECTOR('',#13668,1.);+#13668 = DIRECTION('',(-1.,0.));+#13669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13670 = PCURVE('',#8875,#13671);+#13671 = DEFINITIONAL_REPRESENTATION('',(#13672),#13676);+#13672 = LINE('',#13673,#13674);+#13673 = CARTESIAN_POINT('',(6.0741325004E-02,0.1));+#13674 = VECTOR('',#13675,1.);+#13675 = DIRECTION('',(-1.,0.));+#13676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13677 = ORIENTED_EDGE('',*,*,#13678,.T.);+#13678 = EDGE_CURVE('',#13656,#13679,#13681,.T.);+#13679 = VERTEX_POINT('',#13680);+#13680 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+ 9.314404469578E-02));+#13681 = SURFACE_CURVE('',#13682,(#13686,#13693),.PCURVE_S1.);+#13682 = LINE('',#13683,#13684);+#13683 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+ 9.314404469578E-02));+#13684 = VECTOR('',#13685,1.);+#13685 = DIRECTION('',(0.,1.,0.));+#13686 = PCURVE('',#8791,#13687);+#13687 = DEFINITIONAL_REPRESENTATION('',(#13688),#13692);+#13688 = LINE('',#13689,#13690);+#13689 = CARTESIAN_POINT('',(0.369373429884,-3.9708744992E-02));+#13690 = VECTOR('',#13691,1.);+#13691 = DIRECTION('',(0.,1.));+#13692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13693 = PCURVE('',#13694,#13699);+#13694 = PLANE('',#13695);+#13695 = AXIS2_PLACEMENT_3D('',#13696,#13697,#13698);+#13696 = CARTESIAN_POINT('',(3.450756123492,3.121602300574,+ 0.193144044696));+#13697 = DIRECTION('',(1.,0.,0.));+#13698 = DIRECTION('',(-0.,1.,0.));+#13699 = DEFINITIONAL_REPRESENTATION('',(#13700),#13704);+#13700 = LINE('',#13701,#13702);+#13701 = CARTESIAN_POINT('',(0.224381615929,-0.1));+#13702 = VECTOR('',#13703,1.);+#13703 = DIRECTION('',(1.,0.));+#13704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13705 = ORIENTED_EDGE('',*,*,#13706,.T.);+#13706 = EDGE_CURVE('',#13679,#8776,#13707,.T.);+#13707 = SURFACE_CURVE('',#13708,(#13712,#13719),.PCURVE_S1.);+#13708 = LINE('',#13709,#13710);+#13709 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+ 9.314404469578E-02));+#13710 = VECTOR('',#13711,1.);+#13711 = DIRECTION('',(1.,0.,0.));+#13712 = PCURVE('',#8791,#13713);+#13713 = DEFINITIONAL_REPRESENTATION('',(#13714),#13718);+#13714 = LINE('',#13715,#13716);+#13715 = CARTESIAN_POINT('',(0.369373429884,4.0291255006E-02));+#13716 = VECTOR('',#13717,1.);+#13717 = DIRECTION('',(1.,0.));+#13718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13719 = PCURVE('',#8819,#13720);+#13720 = DEFINITIONAL_REPRESENTATION('',(#13721),#13725);+#13721 = LINE('',#13722,#13723);+#13722 = CARTESIAN_POINT('',(0.123502551513,0.1));+#13723 = VECTOR('',#13724,1.);+#13724 = DIRECTION('',(-1.,-0.));+#13725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13726 = ORIENTED_EDGE('',*,*,#8775,.T.);+#13727 = ORIENTED_EDGE('',*,*,#13451,.F.);+#13728 = ORIENTED_EDGE('',*,*,#13499,.T.);+#13729 = ORIENTED_EDGE('',*,*,#13548,.F.);+#13730 = ORIENTED_EDGE('',*,*,#13602,.T.);+#13731 = ORIENTED_EDGE('',*,*,#13628,.F.);+#13732 = ADVANCED_FACE('',(#13733),#8875,.T.);+#13733 = FACE_BOUND('',#13734,.F.);+#13734 = EDGE_LOOP('',(#13735,#13736,#13759,#13780));+#13735 = ORIENTED_EDGE('',*,*,#8859,.F.);+#13736 = ORIENTED_EDGE('',*,*,#13737,.F.);+#13737 = EDGE_CURVE('',#13738,#8832,#13740,.T.);+#13738 = VERTEX_POINT('',#13739);+#13739 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+ 0.193144044696));+#13740 = SURFACE_CURVE('',#13741,(#13745,#13752),.PCURVE_S1.);+#13741 = LINE('',#13742,#13743);+#13742 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+ 0.193144044696));+#13743 = VECTOR('',#13744,1.);+#13744 = DIRECTION('',(1.,0.,0.));+#13745 = PCURVE('',#8875,#13746);+#13746 = DEFINITIONAL_REPRESENTATION('',(#13747),#13751);+#13747 = LINE('',#13748,#13749);+#13748 = CARTESIAN_POINT('',(1.1497448496E-02,0.));+#13749 = VECTOR('',#13750,1.);+#13750 = DIRECTION('',(1.,0.));+#13751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13752 = PCURVE('',#8847,#13753);+#13753 = DEFINITIONAL_REPRESENTATION('',(#13754),#13758);+#13754 = LINE('',#13755,#13756);+#13755 = CARTESIAN_POINT('',(0.60514126091,-7.088933172E-03));+#13756 = VECTOR('',#13757,1.);+#13757 = DIRECTION('',(1.,0.));+#13758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13759 = ORIENTED_EDGE('',*,*,#13760,.T.);+#13760 = EDGE_CURVE('',#13738,#13656,#13761,.T.);+#13761 = SURFACE_CURVE('',#13762,(#13766,#13773),.PCURVE_S1.);+#13762 = LINE('',#13763,#13764);+#13763 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+ 0.193144044696));+#13764 = VECTOR('',#13765,1.);+#13765 = DIRECTION('',(0.,0.,-1.));+#13766 = PCURVE('',#8875,#13767);+#13767 = DEFINITIONAL_REPRESENTATION('',(#13768),#13772);+#13768 = LINE('',#13769,#13770);+#13769 = CARTESIAN_POINT('',(1.1497448496E-02,0.));+#13770 = VECTOR('',#13771,1.);+#13771 = DIRECTION('',(0.,1.));+#13772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13773 = PCURVE('',#13694,#13774);+#13774 = DEFINITIONAL_REPRESENTATION('',(#13775),#13779);+#13775 = LINE('',#13776,#13777);+#13776 = CARTESIAN_POINT('',(0.224381615929,0.));+#13777 = VECTOR('',#13778,1.);+#13778 = DIRECTION('',(0.,-1.));+#13779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13780 = ORIENTED_EDGE('',*,*,#13655,.F.);+#13781 = ADVANCED_FACE('',(#13782),#8847,.F.);+#13782 = FACE_BOUND('',#13783,.F.);+#13783 = EDGE_LOOP('',(#13784,#13785,#13808,#13829));+#13784 = ORIENTED_EDGE('',*,*,#8831,.T.);+#13785 = ORIENTED_EDGE('',*,*,#13786,.F.);+#13786 = EDGE_CURVE('',#13787,#8804,#13789,.T.);+#13787 = VERTEX_POINT('',#13788);+#13788 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+ 0.193144044696));+#13789 = SURFACE_CURVE('',#13790,(#13794,#13801),.PCURVE_S1.);+#13790 = LINE('',#13791,#13792);+#13791 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+ 0.193144044696));+#13792 = VECTOR('',#13793,1.);+#13793 = DIRECTION('',(1.,0.,0.));+#13794 = PCURVE('',#8847,#13795);+#13795 = DEFINITIONAL_REPRESENTATION('',(#13796),#13800);+#13796 = LINE('',#13797,#13798);+#13797 = CARTESIAN_POINT('',(0.60514126091,7.2911066826E-02));+#13798 = VECTOR('',#13799,1.);+#13799 = DIRECTION('',(1.,0.));+#13800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13801 = PCURVE('',#8819,#13802);+#13802 = DEFINITIONAL_REPRESENTATION('',(#13803),#13807);+#13803 = LINE('',#13804,#13805);+#13804 = CARTESIAN_POINT('',(0.123502551513,0.));+#13805 = VECTOR('',#13806,1.);+#13806 = DIRECTION('',(-1.,-0.));+#13807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13808 = ORIENTED_EDGE('',*,*,#13809,.F.);+#13809 = EDGE_CURVE('',#13738,#13787,#13810,.T.);+#13810 = SURFACE_CURVE('',#13811,(#13815,#13822),.PCURVE_S1.);+#13811 = LINE('',#13812,#13813);+#13812 = CARTESIAN_POINT('',(3.450756123492,3.345983916503,+ 0.193144044696));+#13813 = VECTOR('',#13814,1.);+#13814 = DIRECTION('',(0.,1.,0.));+#13815 = PCURVE('',#8847,#13816);+#13816 = DEFINITIONAL_REPRESENTATION('',(#13817),#13821);+#13817 = LINE('',#13818,#13819);+#13818 = CARTESIAN_POINT('',(0.60514126091,-7.088933172E-03));+#13819 = VECTOR('',#13820,1.);+#13820 = DIRECTION('',(0.,1.));+#13821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13822 = PCURVE('',#13694,#13823);+#13823 = DEFINITIONAL_REPRESENTATION('',(#13824),#13828);+#13824 = LINE('',#13825,#13826);+#13825 = CARTESIAN_POINT('',(0.224381615929,0.));+#13826 = VECTOR('',#13827,1.);+#13827 = DIRECTION('',(1.,0.));+#13828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13829 = ORIENTED_EDGE('',*,*,#13737,.T.);+#13830 = ADVANCED_FACE('',(#13831),#8819,.T.);+#13831 = FACE_BOUND('',#13832,.F.);+#13832 = EDGE_LOOP('',(#13833,#13834,#13835,#13856));+#13833 = ORIENTED_EDGE('',*,*,#8803,.T.);+#13834 = ORIENTED_EDGE('',*,*,#13706,.F.);+#13835 = ORIENTED_EDGE('',*,*,#13836,.F.);+#13836 = EDGE_CURVE('',#13787,#13679,#13837,.T.);+#13837 = SURFACE_CURVE('',#13838,(#13842,#13849),.PCURVE_S1.);+#13838 = LINE('',#13839,#13840);+#13839 = CARTESIAN_POINT('',(3.450756123492,3.425983916501,+ 0.193144044696));+#13840 = VECTOR('',#13841,1.);+#13841 = DIRECTION('',(0.,0.,-1.));+#13842 = PCURVE('',#8819,#13843);+#13843 = DEFINITIONAL_REPRESENTATION('',(#13844),#13848);+#13844 = LINE('',#13845,#13846);+#13845 = CARTESIAN_POINT('',(0.123502551513,0.));+#13846 = VECTOR('',#13847,1.);+#13847 = DIRECTION('',(0.,1.));+#13848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13849 = PCURVE('',#13694,#13850);+#13850 = DEFINITIONAL_REPRESENTATION('',(#13851),#13855);+#13851 = LINE('',#13852,#13853);+#13852 = CARTESIAN_POINT('',(0.304381615927,0.));+#13853 = VECTOR('',#13854,1.);+#13854 = DIRECTION('',(0.,-1.));+#13855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13856 = ORIENTED_EDGE('',*,*,#13786,.T.);+#13857 = ADVANCED_FACE('',(#13858),#13694,.T.);+#13858 = FACE_BOUND('',#13859,.F.);+#13859 = EDGE_LOOP('',(#13860,#13861,#13862,#13863));+#13860 = ORIENTED_EDGE('',*,*,#13760,.F.);+#13861 = ORIENTED_EDGE('',*,*,#13809,.T.);+#13862 = ORIENTED_EDGE('',*,*,#13836,.T.);+#13863 = ORIENTED_EDGE('',*,*,#13678,.F.);+#13864 = ADVANCED_FACE('',(#13865),#2280,.F.);+#13865 = FACE_BOUND('',#13866,.F.);+#13866 = EDGE_LOOP('',(#13867,#13868,#13869,#13892));+#13867 = ORIENTED_EDGE('',*,*,#6631,.F.);+#13868 = ORIENTED_EDGE('',*,*,#2264,.T.);+#13869 = ORIENTED_EDGE('',*,*,#13870,.T.);+#13870 = EDGE_CURVE('',#2237,#13871,#13873,.T.);+#13871 = VERTEX_POINT('',#13872);+#13872 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+ 9.314404469578E-02));+#13873 = SURFACE_CURVE('',#13874,(#13878,#13885),.PCURVE_S1.);+#13874 = LINE('',#13875,#13876);+#13875 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,0.));+#13876 = VECTOR('',#13877,1.);+#13877 = DIRECTION('',(0.,0.,1.));+#13878 = PCURVE('',#2280,#13879);+#13879 = DEFINITIONAL_REPRESENTATION('',(#13880),#13884);+#13880 = LINE('',#13881,#13882);+#13881 = CARTESIAN_POINT('',(6.855955304216E-03,0.));+#13882 = VECTOR('',#13883,1.);+#13883 = DIRECTION('',(1.,0.));+#13884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13885 = PCURVE('',#2252,#13886);+#13886 = DEFINITIONAL_REPRESENTATION('',(#13887),#13891);+#13887 = LINE('',#13888,#13889);+#13888 = CARTESIAN_POINT('',(-0.,-9.314404469578E-02));+#13889 = VECTOR('',#13890,1.);+#13890 = DIRECTION('',(0.,1.));+#13891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13892 = ORIENTED_EDGE('',*,*,#13893,.T.);+#13893 = EDGE_CURVE('',#13871,#6632,#13894,.T.);+#13894 = SURFACE_CURVE('',#13895,(#13899,#13906),.PCURVE_S1.);+#13895 = LINE('',#13896,#13897);+#13896 = CARTESIAN_POINT('',(1.15946203942,4.485692661496,+ 9.314404469578E-02));+#13897 = VECTOR('',#13898,1.);+#13898 = DIRECTION('',(0.,1.,0.));+#13899 = PCURVE('',#2280,#13900);+#13900 = DEFINITIONAL_REPRESENTATION('',(#13901),#13905);+#13901 = LINE('',#13902,#13903);+#13902 = CARTESIAN_POINT('',(1.E-01,0.));+#13903 = VECTOR('',#13904,1.);+#13904 = DIRECTION('',(0.,1.));+#13905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13906 = PCURVE('',#6670,#13907);+#13907 = DEFINITIONAL_REPRESENTATION('',(#13908),#13912);+#13908 = LINE('',#13909,#13910);+#13909 = CARTESIAN_POINT('',(-9.0000000001E-02,0.270508689473));+#13910 = VECTOR('',#13911,1.);+#13911 = DIRECTION('',(0.,1.));+#13912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13913 = ADVANCED_FACE('',(#13914),#2252,.F.);+#13914 = FACE_BOUND('',#13915,.F.);+#13915 = EDGE_LOOP('',(#13916,#13917,#13940,#13961));+#13916 = ORIENTED_EDGE('',*,*,#2236,.T.);+#13917 = ORIENTED_EDGE('',*,*,#13918,.F.);+#13918 = EDGE_CURVE('',#13919,#2209,#13921,.T.);+#13919 = VERTEX_POINT('',#13920);+#13920 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+ 9.314404469578E-02));+#13921 = SURFACE_CURVE('',#13922,(#13926,#13933),.PCURVE_S1.);+#13922 = LINE('',#13923,#13924);+#13923 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+ 9.314404469578E-02));+#13924 = VECTOR('',#13925,1.);+#13925 = DIRECTION('',(0.,-1.907107260804E-14,-1.));+#13926 = PCURVE('',#2252,#13927);+#13927 = DEFINITIONAL_REPRESENTATION('',(#13928),#13932);+#13928 = LINE('',#13929,#13930);+#13929 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#13930 = VECTOR('',#13931,1.);+#13931 = DIRECTION('',(1.728188445828E-14,-1.));+#13932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13933 = PCURVE('',#2224,#13934);+#13934 = DEFINITIONAL_REPRESENTATION('',(#13935),#13939);+#13935 = LINE('',#13936,#13937);+#13936 = CARTESIAN_POINT('',(0.,0.));+#13937 = VECTOR('',#13938,1.);+#13938 = DIRECTION('',(1.907107260804E-14,-1.));+#13939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13940 = ORIENTED_EDGE('',*,*,#13941,.T.);+#13941 = EDGE_CURVE('',#13919,#13871,#13942,.T.);+#13942 = SURFACE_CURVE('',#13943,(#13947,#13954),.PCURVE_S1.);+#13943 = LINE('',#13944,#13945);+#13944 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+ 9.314404469578E-02));+#13945 = VECTOR('',#13946,1.);+#13946 = DIRECTION('',(0.422885465415,0.906183139956,0.));+#13947 = PCURVE('',#2252,#13948);+#13948 = DEFINITIONAL_REPRESENTATION('',(#13949),#13953);+#13949 = LINE('',#13950,#13951);+#13950 = CARTESIAN_POINT('',(8.276472678648E-02,0.));+#13951 = VECTOR('',#13952,1.);+#13952 = DIRECTION('',(-1.,0.));+#13953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13954 = PCURVE('',#6670,#13955);+#13955 = DEFINITIONAL_REPRESENTATION('',(#13956),#13960);+#13956 = LINE('',#13957,#13958);+#13957 = CARTESIAN_POINT('',(-0.125000000008,0.195508689476));+#13958 = VECTOR('',#13959,1.);+#13959 = DIRECTION('',(0.422885465415,0.906183139956));+#13960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13961 = ORIENTED_EDGE('',*,*,#13870,.F.);+#13962 = ADVANCED_FACE('',(#13963),#2224,.F.);+#13963 = FACE_BOUND('',#13964,.F.);+#13964 = EDGE_LOOP('',(#13965,#13966,#13989,#14010));+#13965 = ORIENTED_EDGE('',*,*,#2208,.T.);+#13966 = ORIENTED_EDGE('',*,*,#13967,.F.);+#13967 = EDGE_CURVE('',#13968,#2176,#13970,.T.);+#13968 = VERTEX_POINT('',#13969);+#13969 = CARTESIAN_POINT('',(1.12446203942,4.010692661583,+ 9.314404469578E-02));+#13970 = SURFACE_CURVE('',#13971,(#13975,#13982),.PCURVE_S1.);+#13971 = LINE('',#13972,#13973);+#13972 = CARTESIAN_POINT('',(1.124462039416,4.010692661524,+ 9.314404469578E-02));+#13973 = VECTOR('',#13974,1.);+#13974 = DIRECTION('',(0.,-1.205101078102E-10,-1.));+#13975 = PCURVE('',#2224,#13976);+#13976 = DEFINITIONAL_REPRESENTATION('',(#13977),#13981);+#13977 = LINE('',#13978,#13979);+#13978 = CARTESIAN_POINT('',(0.399999999975,0.));+#13979 = VECTOR('',#13980,1.);+#13980 = DIRECTION('',(1.205101078102E-10,-1.));+#13981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13982 = PCURVE('',#2196,#13983);+#13983 = DEFINITIONAL_REPRESENTATION('',(#13984),#13988);+#13984 = LINE('',#13985,#13986);+#13985 = CARTESIAN_POINT('',(6.28318530718,7.110086245646E-21));+#13986 = VECTOR('',#13987,1.);+#13987 = DIRECTION('',(0.,1.));+#13988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13989 = ORIENTED_EDGE('',*,*,#13990,.F.);+#13990 = EDGE_CURVE('',#13919,#13968,#13991,.T.);+#13991 = SURFACE_CURVE('',#13992,(#13996,#14003),.PCURVE_S1.);+#13992 = LINE('',#13993,#13994);+#13993 = CARTESIAN_POINT('',(1.124462039413,4.410692661499,+ 9.314404469578E-02));+#13994 = VECTOR('',#13995,1.);+#13995 = DIRECTION('',(6.060707491806E-12,-1.,0.));+#13996 = PCURVE('',#2224,#13997);+#13997 = DEFINITIONAL_REPRESENTATION('',(#13998),#14002);+#13998 = LINE('',#13999,#14000);+#13999 = CARTESIAN_POINT('',(0.,0.));+#14000 = VECTOR('',#14001,1.);+#14001 = DIRECTION('',(1.,0.));+#14002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14003 = PCURVE('',#6670,#14004);+#14004 = DEFINITIONAL_REPRESENTATION('',(#14005),#14009);+#14005 = LINE('',#14006,#14007);+#14006 = CARTESIAN_POINT('',(-0.125000000008,0.195508689476));+#14007 = VECTOR('',#14008,1.);+#14008 = DIRECTION('',(6.060707491806E-12,-1.));+#14009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14010 = ORIENTED_EDGE('',*,*,#13918,.T.);+#14011 = ADVANCED_FACE('',(#14012),#2196,.F.);+#14012 = FACE_BOUND('',#14013,.F.);+#14013 = EDGE_LOOP('',(#14014,#14015,#14038,#14064));+#14014 = ORIENTED_EDGE('',*,*,#2175,.F.);+#14015 = ORIENTED_EDGE('',*,*,#14016,.T.);+#14016 = EDGE_CURVE('',#2148,#14017,#14019,.T.);+#14017 = VERTEX_POINT('',#14018);+#14018 = CARTESIAN_POINT('',(1.37446203942,4.010692661362,+ 9.314404469578E-02));+#14019 = SURFACE_CURVE('',#14020,(#14024,#14031),.PCURVE_S1.);+#14020 = LINE('',#14021,#14022);+#14021 = CARTESIAN_POINT('',(1.374462039413,4.010692661467,0.));+#14022 = VECTOR('',#14023,1.);+#14023 = DIRECTION('',(0.,-1.807365551064E-10,1.));+#14024 = PCURVE('',#2196,#14025);+#14025 = DEFINITIONAL_REPRESENTATION('',(#14026),#14030);+#14026 = LINE('',#14027,#14028);+#14027 = CARTESIAN_POINT('',(3.141592653801,9.314404469578E-02));+#14028 = VECTOR('',#14029,1.);+#14029 = DIRECTION('',(1.445892440852E-09,-1.));+#14030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14031 = PCURVE('',#2163,#14032);+#14032 = DEFINITIONAL_REPRESENTATION('',(#14033),#14037);+#14033 = LINE('',#14034,#14035);+#14034 = CARTESIAN_POINT('',(-0.325000000035,-9.314404469578E-02));+#14035 = VECTOR('',#14036,1.);+#14036 = DIRECTION('',(-1.807365551064E-10,1.));+#14037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14038 = ORIENTED_EDGE('',*,*,#14039,.T.);+#14039 = EDGE_CURVE('',#14017,#13968,#14040,.T.);+#14040 = SURFACE_CURVE('',#14041,(#14046,#14053),.PCURVE_S1.);+#14041 = CIRCLE('',#14042,0.125);+#14042 = AXIS2_PLACEMENT_3D('',#14043,#14044,#14045);+#14043 = CARTESIAN_POINT('',(1.24946203942,4.010692661494,+ 9.314404469578E-02));+#14044 = DIRECTION('',(0.,0.,-1.));+#14045 = DIRECTION('',(1.,-1.057870235854E-09,0.));+#14046 = PCURVE('',#2196,#14047);+#14047 = DEFINITIONAL_REPRESENTATION('',(#14048),#14052);+#14048 = LINE('',#14049,#14050);+#14049 = CARTESIAN_POINT('',(3.141592654643,0.));+#14050 = VECTOR('',#14051,1.);+#14051 = DIRECTION('',(1.,0.));+#14052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14053 = PCURVE('',#6670,#14054);+#14054 = DEFINITIONAL_REPRESENTATION('',(#14055),#14063);+#14055 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14056,#14057,#14058,#14059+ ,#14060,#14061,#14062),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14056 = CARTESIAN_POINT('',(0.124999999999,-0.204491310661));+#14057 = CARTESIAN_POINT('',(0.12499999977,-0.420997661607));+#14058 = CARTESIAN_POINT('',(-6.250000011552E-02,-0.312744485936));+#14059 = CARTESIAN_POINT('',(-0.250000000001,-0.204491310265));+#14060 = CARTESIAN_POINT('',(-6.249999988648E-02,-9.623813498983E-02));+#14061 = CARTESIAN_POINT('',(0.125000000228,1.201504028488E-02));+#14062 = CARTESIAN_POINT('',(0.124999999999,-0.204491310661));+#14063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14064 = ORIENTED_EDGE('',*,*,#13967,.T.);+#14065 = ADVANCED_FACE('',(#14066),#2163,.F.);+#14066 = FACE_BOUND('',#14067,.F.);+#14067 = EDGE_LOOP('',(#14068,#14069,#14092,#14113));+#14068 = ORIENTED_EDGE('',*,*,#2147,.T.);+#14069 = ORIENTED_EDGE('',*,*,#14070,.T.);+#14070 = EDGE_CURVE('',#2120,#14071,#14073,.T.);+#14071 = VERTEX_POINT('',#14072);+#14072 = CARTESIAN_POINT('',(1.374462039409,4.410692661536,+ 9.314404469578E-02));+#14073 = SURFACE_CURVE('',#14074,(#14078,#14085),.PCURVE_S1.);+#14074 = LINE('',#14075,#14076);+#14075 = CARTESIAN_POINT('',(1.374462039409,4.410692661536,0.));+#14076 = VECTOR('',#14077,1.);+#14077 = DIRECTION('',(0.,-1.907107260804E-14,1.));+#14078 = PCURVE('',#2163,#14079);+#14079 = DEFINITIONAL_REPRESENTATION('',(#14080),#14084);+#14080 = LINE('',#14081,#14082);+#14081 = CARTESIAN_POINT('',(7.5000000034E-02,-9.314404469578E-02));+#14082 = VECTOR('',#14083,1.);+#14083 = DIRECTION('',(-1.907107260804E-14,1.));+#14084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14085 = PCURVE('',#2135,#14086);+#14086 = DEFINITIONAL_REPRESENTATION('',(#14087),#14091);+#14087 = LINE('',#14088,#14089);+#14088 = CARTESIAN_POINT('',(8.276472674582E-02,9.314404469578E-02));+#14089 = VECTOR('',#14090,1.);+#14090 = DIRECTION('',(1.72818844584E-14,-1.));+#14091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14092 = ORIENTED_EDGE('',*,*,#14093,.F.);+#14093 = EDGE_CURVE('',#14017,#14071,#14094,.T.);+#14094 = SURFACE_CURVE('',#14095,(#14099,#14106),.PCURVE_S1.);+#14095 = LINE('',#14096,#14097);+#14096 = CARTESIAN_POINT('',(1.374462039413,4.01069266145,+ 9.314404469578E-02));+#14097 = VECTOR('',#14098,1.);+#14098 = DIRECTION('',(-9.090506123678E-12,1.,0.));+#14099 = PCURVE('',#2163,#14100);+#14100 = DEFINITIONAL_REPRESENTATION('',(#14101),#14105);+#14101 = LINE('',#14102,#14103);+#14102 = CARTESIAN_POINT('',(-0.325000000052,0.));+#14103 = VECTOR('',#14104,1.);+#14104 = DIRECTION('',(1.,0.));+#14105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14106 = PCURVE('',#6670,#14107);+#14107 = DEFINITIONAL_REPRESENTATION('',(#14108),#14112);+#14108 = LINE('',#14109,#14110);+#14109 = CARTESIAN_POINT('',(0.124999999992,-0.204491310573));+#14110 = VECTOR('',#14111,1.);+#14111 = DIRECTION('',(-9.090506123678E-12,1.));+#14112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14113 = ORIENTED_EDGE('',*,*,#14016,.F.);+#14114 = ADVANCED_FACE('',(#14115),#2135,.F.);+#14115 = FACE_BOUND('',#14116,.F.);+#14116 = EDGE_LOOP('',(#14117,#14118,#14141,#14162));+#14117 = ORIENTED_EDGE('',*,*,#2119,.F.);+#14118 = ORIENTED_EDGE('',*,*,#14119,.F.);+#14119 = EDGE_CURVE('',#14120,#2092,#14122,.T.);+#14120 = VERTEX_POINT('',#14121);+#14121 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+ 9.314404469578E-02));+#14122 = SURFACE_CURVE('',#14123,(#14127,#14134),.PCURVE_S1.);+#14123 = LINE('',#14124,#14125);+#14124 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+ 9.314404469578E-02));+#14125 = VECTOR('',#14126,1.);+#14126 = DIRECTION('',(0.,0.,-1.));+#14127 = PCURVE('',#2135,#14128);+#14128 = DEFINITIONAL_REPRESENTATION('',(#14129),#14133);+#14129 = LINE('',#14130,#14131);+#14130 = CARTESIAN_POINT('',(0.,0.));+#14131 = VECTOR('',#14132,1.);+#14132 = DIRECTION('',(0.,1.));+#14133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14134 = PCURVE('',#2107,#14135);+#14135 = DEFINITIONAL_REPRESENTATION('',(#14136),#14140);+#14136 = LINE('',#14137,#14138);+#14137 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#14138 = VECTOR('',#14139,1.);+#14139 = DIRECTION('',(1.,0.));+#14140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14141 = ORIENTED_EDGE('',*,*,#14142,.T.);+#14142 = EDGE_CURVE('',#14120,#14071,#14143,.T.);+#14143 = SURFACE_CURVE('',#14144,(#14148,#14155),.PCURVE_S1.);+#14144 = LINE('',#14145,#14146);+#14145 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+ 9.314404469578E-02));+#14146 = VECTOR('',#14147,1.);+#14147 = DIRECTION('',(0.422885465402,-0.906183139962,0.));+#14148 = PCURVE('',#2135,#14149);+#14149 = DEFINITIONAL_REPRESENTATION('',(#14150),#14154);+#14150 = LINE('',#14151,#14152);+#14151 = CARTESIAN_POINT('',(0.,0.));+#14152 = VECTOR('',#14153,1.);+#14153 = DIRECTION('',(1.,0.));+#14154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14155 = PCURVE('',#6670,#14156);+#14156 = DEFINITIONAL_REPRESENTATION('',(#14157),#14161);+#14157 = LINE('',#14158,#14159);+#14158 = CARTESIAN_POINT('',(9.E-02,0.270508689474));+#14159 = VECTOR('',#14160,1.);+#14160 = DIRECTION('',(0.422885465402,-0.906183139962));+#14161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14162 = ORIENTED_EDGE('',*,*,#14070,.F.);+#14163 = ADVANCED_FACE('',(#14164),#2107,.F.);+#14164 = FACE_BOUND('',#14165,.F.);+#14165 = EDGE_LOOP('',(#14166,#14167,#14188,#14189));+#14166 = ORIENTED_EDGE('',*,*,#6789,.T.);+#14167 = ORIENTED_EDGE('',*,*,#14168,.F.);+#14168 = EDGE_CURVE('',#14120,#6767,#14169,.T.);+#14169 = SURFACE_CURVE('',#14170,(#14174,#14181),.PCURVE_S1.);+#14170 = LINE('',#14171,#14172);+#14171 = CARTESIAN_POINT('',(1.339462039421,4.485692661497,+ 9.314404469578E-02));+#14172 = VECTOR('',#14173,1.);+#14173 = DIRECTION('',(0.,1.,0.));+#14174 = PCURVE('',#2107,#14175);+#14175 = DEFINITIONAL_REPRESENTATION('',(#14176),#14180);+#14176 = LINE('',#14177,#14178);+#14177 = CARTESIAN_POINT('',(0.,9.992007221626E-13));+#14178 = VECTOR('',#14179,1.);+#14179 = DIRECTION('',(0.,1.));+#14180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14181 = PCURVE('',#6670,#14182);+#14182 = DEFINITIONAL_REPRESENTATION('',(#14183),#14187);+#14183 = LINE('',#14184,#14185);+#14184 = CARTESIAN_POINT('',(9.E-02,0.270508689474));+#14185 = VECTOR('',#14186,1.);+#14186 = DIRECTION('',(0.,1.));+#14187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14188 = ORIENTED_EDGE('',*,*,#14119,.T.);+#14189 = ORIENTED_EDGE('',*,*,#2091,.F.);+#14190 = ADVANCED_FACE('',(#14191),#6670,.F.);+#14191 = FACE_BOUND('',#14192,.F.);+#14192 = EDGE_LOOP('',(#14193,#14194,#14195,#14196,#14197,#14198,#14199,+ #14200,#14201,#14202,#14225,#14253));+#14193 = ORIENTED_EDGE('',*,*,#6654,.F.);+#14194 = ORIENTED_EDGE('',*,*,#13893,.F.);+#14195 = ORIENTED_EDGE('',*,*,#13941,.F.);+#14196 = ORIENTED_EDGE('',*,*,#13990,.T.);+#14197 = ORIENTED_EDGE('',*,*,#14039,.F.);+#14198 = ORIENTED_EDGE('',*,*,#14093,.T.);+#14199 = ORIENTED_EDGE('',*,*,#14142,.F.);+#14200 = ORIENTED_EDGE('',*,*,#14168,.T.);+#14201 = ORIENTED_EDGE('',*,*,#6766,.F.);+#14202 = ORIENTED_EDGE('',*,*,#14203,.F.);+#14203 = EDGE_CURVE('',#14204,#6739,#14206,.T.);+#14204 = VERTEX_POINT('',#14205);+#14205 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+ 9.314404469578E-02));+#14206 = SURFACE_CURVE('',#14207,(#14211,#14218),.PCURVE_S1.);+#14207 = LINE('',#14208,#14209);+#14208 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+ 9.314404469578E-02));+#14209 = VECTOR('',#14210,1.);+#14210 = DIRECTION('',(0.,1.,0.));+#14211 = PCURVE('',#6670,#14212);+#14212 = DEFINITIONAL_REPRESENTATION('',(#14213),#14217);+#14213 = LINE('',#14214,#14215);+#14214 = CARTESIAN_POINT('',(3.9796638866E-02,0.239145992051));+#14215 = VECTOR('',#14216,1.);+#14216 = DIRECTION('',(0.,1.));+#14217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14218 = PCURVE('',#6754,#14219);+#14219 = DEFINITIONAL_REPRESENTATION('',(#14220),#14224);+#14220 = LINE('',#14221,#14222);+#14221 = CARTESIAN_POINT('',(2.8346052626E-02,0.1));+#14222 = VECTOR('',#14223,1.);+#14223 = DIRECTION('',(1.,0.));+#14224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14225 = ORIENTED_EDGE('',*,*,#14226,.T.);+#14226 = EDGE_CURVE('',#14204,#14227,#14229,.T.);+#14227 = VERTEX_POINT('',#14228);+#14228 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+ 9.314404469578E-02));+#14229 = SURFACE_CURVE('',#14230,(#14234,#14241),.PCURVE_S1.);+#14230 = LINE('',#14231,#14232);+#14231 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+ 9.314404469578E-02));+#14232 = VECTOR('',#14233,1.);+#14233 = DIRECTION('',(-1.,1.110223024651E-14,0.));+#14234 = PCURVE('',#6670,#14235);+#14235 = DEFINITIONAL_REPRESENTATION('',(#14236),#14240);+#14236 = LINE('',#14237,#14238);+#14237 = CARTESIAN_POINT('',(3.9796638866E-02,0.239145992051));+#14238 = VECTOR('',#14239,1.);+#14239 = DIRECTION('',(-1.,1.110223024651E-14));+#14240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14241 = PCURVE('',#14242,#14247);+#14242 = PLANE('',#14243);+#14243 = AXIS2_PLACEMENT_3D('',#14244,#14245,#14246);+#14244 = CARTESIAN_POINT('',(1.461796731363,4.454329964074,+ 0.193144044696));+#14245 = DIRECTION('',(0.,1.,0.));+#14246 = DIRECTION('',(-1.,0.,0.));+#14247 = DEFINITIONAL_REPRESENTATION('',(#14248),#14252);+#14248 = LINE('',#14249,#14250);+#14249 = CARTESIAN_POINT('',(0.172538053076,-0.1));+#14250 = VECTOR('',#14251,1.);+#14251 = DIRECTION('',(1.,0.));+#14252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14253 = ORIENTED_EDGE('',*,*,#14254,.T.);+#14254 = EDGE_CURVE('',#14227,#6655,#14255,.T.);+#14255 = SURFACE_CURVE('',#14256,(#14260,#14267),.PCURVE_S1.);+#14256 = LINE('',#14257,#14258);+#14257 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+ 9.314404469578E-02));+#14258 = VECTOR('',#14259,1.);+#14259 = DIRECTION('',(0.,1.,0.));+#14260 = PCURVE('',#6670,#14261);+#14261 = DEFINITIONAL_REPRESENTATION('',(#14262),#14266);+#14262 = LINE('',#14263,#14264);+#14263 = CARTESIAN_POINT('',(-4.0203361132E-02,0.239145992051));+#14264 = VECTOR('',#14265,1.);+#14265 = DIRECTION('',(0.,1.));+#14266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14267 = PCURVE('',#6698,#14268);+#14268 = DEFINITIONAL_REPRESENTATION('',(#14269),#14273);+#14269 = LINE('',#14270,#14271);+#14270 = CARTESIAN_POINT('',(0.106653947374,0.1));+#14271 = VECTOR('',#14272,1.);+#14272 = DIRECTION('',(-1.,0.));+#14273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14274 = ADVANCED_FACE('',(#14275),#6754,.T.);+#14275 = FACE_BOUND('',#14276,.F.);+#14276 = EDGE_LOOP('',(#14277,#14278,#14301,#14322));+#14277 = ORIENTED_EDGE('',*,*,#6738,.F.);+#14278 = ORIENTED_EDGE('',*,*,#14279,.F.);+#14279 = EDGE_CURVE('',#14280,#6711,#14282,.T.);+#14280 = VERTEX_POINT('',#14281);+#14281 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+ 0.193144044696));+#14282 = SURFACE_CURVE('',#14283,(#14287,#14294),.PCURVE_S1.);+#14283 = LINE('',#14284,#14285);+#14284 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+ 0.193144044696));+#14285 = VECTOR('',#14286,1.);+#14286 = DIRECTION('',(0.,1.,0.));+#14287 = PCURVE('',#6754,#14288);+#14288 = DEFINITIONAL_REPRESENTATION('',(#14289),#14293);+#14289 = LINE('',#14290,#14291);+#14290 = CARTESIAN_POINT('',(2.8346052626E-02,0.));+#14291 = VECTOR('',#14292,1.);+#14292 = DIRECTION('',(1.,0.));+#14293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14294 = PCURVE('',#6726,#14295);+#14295 = DEFINITIONAL_REPRESENTATION('',(#14296),#14300);+#14296 = LINE('',#14297,#14298);+#14297 = CARTESIAN_POINT('',(4.214746782E-02,0.287940178322));+#14298 = VECTOR('',#14299,1.);+#14299 = DIRECTION('',(0.,1.));+#14300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14301 = ORIENTED_EDGE('',*,*,#14302,.T.);+#14302 = EDGE_CURVE('',#14280,#14204,#14303,.T.);+#14303 = SURFACE_CURVE('',#14304,(#14308,#14315),.PCURVE_S1.);+#14304 = LINE('',#14305,#14306);+#14305 = CARTESIAN_POINT('',(1.289258678287,4.454329964074,+ 0.193144044696));+#14306 = VECTOR('',#14307,1.);+#14307 = DIRECTION('',(0.,0.,-1.));+#14308 = PCURVE('',#6754,#14309);+#14309 = DEFINITIONAL_REPRESENTATION('',(#14310),#14314);+#14310 = LINE('',#14311,#14312);+#14311 = CARTESIAN_POINT('',(2.8346052626E-02,0.));+#14312 = VECTOR('',#14313,1.);+#14313 = DIRECTION('',(0.,1.));+#14314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14315 = PCURVE('',#14242,#14316);+#14316 = DEFINITIONAL_REPRESENTATION('',(#14317),#14321);+#14317 = LINE('',#14318,#14319);+#14318 = CARTESIAN_POINT('',(0.172538053076,0.));+#14319 = VECTOR('',#14320,1.);+#14320 = DIRECTION('',(0.,-1.));+#14321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14322 = ORIENTED_EDGE('',*,*,#14203,.T.);+#14323 = ADVANCED_FACE('',(#14324),#6726,.F.);+#14324 = FACE_BOUND('',#14325,.F.);+#14325 = EDGE_LOOP('',(#14326,#14327,#14350,#14371));+#14326 = ORIENTED_EDGE('',*,*,#6710,.F.);+#14327 = ORIENTED_EDGE('',*,*,#14328,.T.);+#14328 = EDGE_CURVE('',#6683,#14329,#14331,.T.);+#14329 = VERTEX_POINT('',#14330);+#14330 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+ 0.193144044696));+#14331 = SURFACE_CURVE('',#14332,(#14336,#14343),.PCURVE_S1.);+#14332 = LINE('',#14333,#14334);+#14333 = CARTESIAN_POINT('',(1.209258678289,4.5,0.193144044696));+#14334 = VECTOR('',#14335,1.);+#14335 = DIRECTION('',(0.,-1.,0.));+#14336 = PCURVE('',#6726,#14337);+#14337 = DEFINITIONAL_REPRESENTATION('',(#14338),#14342);+#14338 = LINE('',#14339,#14340);+#14339 = CARTESIAN_POINT('',(-3.7852532178E-02,0.333610214248));+#14340 = VECTOR('',#14341,1.);+#14341 = DIRECTION('',(0.,-1.));+#14342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14343 = PCURVE('',#6698,#14344);+#14344 = DEFINITIONAL_REPRESENTATION('',(#14345),#14349);+#14345 = LINE('',#14346,#14347);+#14346 = CARTESIAN_POINT('',(6.0983911448E-02,0.));+#14347 = VECTOR('',#14348,1.);+#14348 = DIRECTION('',(1.,0.));+#14349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14350 = ORIENTED_EDGE('',*,*,#14351,.T.);+#14351 = EDGE_CURVE('',#14329,#14280,#14352,.T.);+#14352 = SURFACE_CURVE('',#14353,(#14357,#14364),.PCURVE_S1.);+#14353 = LINE('',#14354,#14355);+#14354 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+ 0.193144044696));+#14355 = VECTOR('',#14356,1.);+#14356 = DIRECTION('',(1.,0.,0.));+#14357 = PCURVE('',#6726,#14358);+#14358 = DEFINITIONAL_REPRESENTATION('',(#14359),#14363);+#14359 = LINE('',#14360,#14361);+#14360 = CARTESIAN_POINT('',(-3.7852532178E-02,0.287940178322));+#14361 = VECTOR('',#14362,1.);+#14362 = DIRECTION('',(1.,0.));+#14363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14364 = PCURVE('',#14242,#14365);+#14365 = DEFINITIONAL_REPRESENTATION('',(#14366),#14370);+#14366 = LINE('',#14367,#14368);+#14367 = CARTESIAN_POINT('',(0.252538053074,0.));+#14368 = VECTOR('',#14369,1.);+#14369 = DIRECTION('',(-1.,0.));+#14370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14371 = ORIENTED_EDGE('',*,*,#14279,.T.);+#14372 = ADVANCED_FACE('',(#14373),#6698,.T.);+#14373 = FACE_BOUND('',#14374,.F.);+#14374 = EDGE_LOOP('',(#14375,#14376,#14377,#14398));+#14375 = ORIENTED_EDGE('',*,*,#6682,.T.);+#14376 = ORIENTED_EDGE('',*,*,#14254,.F.);+#14377 = ORIENTED_EDGE('',*,*,#14378,.F.);+#14378 = EDGE_CURVE('',#14329,#14227,#14379,.T.);+#14379 = SURFACE_CURVE('',#14380,(#14384,#14391),.PCURVE_S1.);+#14380 = LINE('',#14381,#14382);+#14381 = CARTESIAN_POINT('',(1.209258678289,4.454329964074,+ 0.193144044696));+#14382 = VECTOR('',#14383,1.);+#14383 = DIRECTION('',(0.,0.,-1.));+#14384 = PCURVE('',#6698,#14385);+#14385 = DEFINITIONAL_REPRESENTATION('',(#14386),#14390);+#14386 = LINE('',#14387,#14388);+#14387 = CARTESIAN_POINT('',(0.106653947374,0.));+#14388 = VECTOR('',#14389,1.);+#14389 = DIRECTION('',(0.,1.));+#14390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14391 = PCURVE('',#14242,#14392);+#14392 = DEFINITIONAL_REPRESENTATION('',(#14393),#14397);+#14393 = LINE('',#14394,#14395);+#14394 = CARTESIAN_POINT('',(0.252538053074,0.));+#14395 = VECTOR('',#14396,1.);+#14396 = DIRECTION('',(0.,-1.));+#14397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14398 = ORIENTED_EDGE('',*,*,#14328,.F.);+#14399 = ADVANCED_FACE('',(#14400),#14242,.T.);+#14400 = FACE_BOUND('',#14401,.F.);+#14401 = EDGE_LOOP('',(#14402,#14403,#14404,#14405));+#14402 = ORIENTED_EDGE('',*,*,#14378,.T.);+#14403 = ORIENTED_EDGE('',*,*,#14226,.F.);+#14404 = ORIENTED_EDGE('',*,*,#14302,.F.);+#14405 = ORIENTED_EDGE('',*,*,#14351,.F.);+#14406 = ADVANCED_FACE('',(#14407),#3226,.F.);+#14407 = FACE_BOUND('',#14408,.F.);+#14408 = EDGE_LOOP('',(#14409,#14410,#14411,#14434));+#14409 = ORIENTED_EDGE('',*,*,#4633,.F.);+#14410 = ORIENTED_EDGE('',*,*,#3210,.F.);+#14411 = ORIENTED_EDGE('',*,*,#14412,.F.);+#14412 = EDGE_CURVE('',#14413,#3183,#14415,.T.);+#14413 = VERTEX_POINT('',#14414);+#14414 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+ 9.314404469578E-02));+#14415 = SURFACE_CURVE('',#14416,(#14420,#14427),.PCURVE_S1.);+#14416 = LINE('',#14417,#14418);+#14417 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+ 9.314404469578E-02));+#14418 = VECTOR('',#14419,1.);+#14419 = DIRECTION('',(0.,0.,-1.));+#14420 = PCURVE('',#3226,#14421);+#14421 = DEFINITIONAL_REPRESENTATION('',(#14422),#14426);+#14422 = LINE('',#14423,#14424);+#14423 = CARTESIAN_POINT('',(4.153331351416E-12,0.));+#14424 = VECTOR('',#14425,1.);+#14425 = DIRECTION('',(0.,1.));+#14426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14427 = PCURVE('',#3198,#14428);+#14428 = DEFINITIONAL_REPRESENTATION('',(#14429),#14433);+#14429 = LINE('',#14430,#14431);+#14430 = CARTESIAN_POINT('',(-6.606579991408E-09,0.));+#14431 = VECTOR('',#14432,1.);+#14432 = DIRECTION('',(0.,-1.));+#14433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14434 = ORIENTED_EDGE('',*,*,#14435,.T.);+#14435 = EDGE_CURVE('',#14413,#4634,#14436,.T.);+#14436 = SURFACE_CURVE('',#14437,(#14441,#14448),.PCURVE_S1.);+#14437 = LINE('',#14438,#14439);+#14438 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+ 9.314404469578E-02));+#14439 = VECTOR('',#14440,1.);+#14440 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#14441 = PCURVE('',#3226,#14442);+#14442 = DEFINITIONAL_REPRESENTATION('',(#14443),#14447);+#14443 = LINE('',#14444,#14445);+#14444 = CARTESIAN_POINT('',(4.153331351416E-12,0.));+#14445 = VECTOR('',#14446,1.);+#14446 = DIRECTION('',(1.,0.));+#14447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14448 = PCURVE('',#4255,#14449);+#14449 = DEFINITIONAL_REPRESENTATION('',(#14450),#14454);+#14450 = LINE('',#14451,#14452);+#14451 = CARTESIAN_POINT('',(-0.520267411263,-0.915763807487));+#14452 = VECTOR('',#14453,1.);+#14453 = DIRECTION('',(-0.90618313999,0.422885465342));+#14454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14455 = ADVANCED_FACE('',(#14456),#3198,.F.);+#14456 = FACE_BOUND('',#14457,.F.);+#14457 = EDGE_LOOP('',(#14458,#14459,#14482,#14503));+#14458 = ORIENTED_EDGE('',*,*,#3182,.T.);+#14459 = ORIENTED_EDGE('',*,*,#14460,.T.);+#14460 = EDGE_CURVE('',#3155,#14461,#14463,.T.);+#14461 = VERTEX_POINT('',#14462);+#14462 = CARTESIAN_POINT('',(0.199462039425,0.310692661501,+ 9.314404469578E-02));+#14463 = SURFACE_CURVE('',#14464,(#14468,#14475),.PCURVE_S1.);+#14464 = LINE('',#14465,#14466);+#14465 = CARTESIAN_POINT('',(0.199462039425,0.310692661501,0.));+#14466 = VECTOR('',#14467,1.);+#14467 = DIRECTION('',(0.,0.,1.));+#14468 = PCURVE('',#3198,#14469);+#14469 = DEFINITIONAL_REPRESENTATION('',(#14470),#14474);+#14470 = LINE('',#14471,#14472);+#14471 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#14472 = VECTOR('',#14473,1.);+#14473 = DIRECTION('',(0.,1.));+#14474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14475 = PCURVE('',#3170,#14476);+#14476 = DEFINITIONAL_REPRESENTATION('',(#14477),#14481);+#14477 = LINE('',#14478,#14479);+#14478 = CARTESIAN_POINT('',(0.100000000003,9.314404469578E-02));+#14479 = VECTOR('',#14480,1.);+#14480 = DIRECTION('',(0.,-1.));+#14481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14482 = ORIENTED_EDGE('',*,*,#14483,.F.);+#14483 = EDGE_CURVE('',#14413,#14461,#14484,.T.);+#14484 = SURFACE_CURVE('',#14485,(#14489,#14496),.PCURVE_S1.);+#14485 = LINE('',#14486,#14487);+#14486 = CARTESIAN_POINT('',(7.446203941383E-02,0.310692661501,+ 9.314404469578E-02));+#14487 = VECTOR('',#14488,1.);+#14488 = DIRECTION('',(1.,0.,0.));+#14489 = PCURVE('',#3198,#14490);+#14490 = DEFINITIONAL_REPRESENTATION('',(#14491),#14495);+#14491 = LINE('',#14492,#14493);+#14492 = CARTESIAN_POINT('',(-6.606579991408E-09,0.));+#14493 = VECTOR('',#14494,1.);+#14494 = DIRECTION('',(1.,0.));+#14495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14496 = PCURVE('',#4255,#14497);+#14497 = DEFINITIONAL_REPRESENTATION('',(#14498),#14502);+#14498 = LINE('',#14499,#14500);+#14499 = CARTESIAN_POINT('',(-0.520267411263,-0.915763807487));+#14500 = VECTOR('',#14501,1.);+#14501 = DIRECTION('',(1.,0.));+#14502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14503 = ORIENTED_EDGE('',*,*,#14412,.T.);+#14504 = ADVANCED_FACE('',(#14505),#3170,.F.);+#14505 = FACE_BOUND('',#14506,.F.);+#14506 = EDGE_LOOP('',(#14507,#14508,#14531,#14552));+#14507 = ORIENTED_EDGE('',*,*,#3154,.F.);+#14508 = ORIENTED_EDGE('',*,*,#14509,.T.);+#14509 = EDGE_CURVE('',#3127,#14510,#14512,.T.);+#14510 = VERTEX_POINT('',#14511);+#14511 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,+ 9.314404469578E-02));+#14512 = SURFACE_CURVE('',#14513,(#14517,#14524),.PCURVE_S1.);+#14513 = LINE('',#14514,#14515);+#14514 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,0.));+#14515 = VECTOR('',#14516,1.);+#14516 = DIRECTION('',(0.,0.,1.));+#14517 = PCURVE('',#3170,#14518);+#14518 = DEFINITIONAL_REPRESENTATION('',(#14519),#14523);+#14519 = LINE('',#14520,#14521);+#14520 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14521 = VECTOR('',#14522,1.);+#14522 = DIRECTION('',(0.,-1.));+#14523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14524 = PCURVE('',#3142,#14525);+#14525 = DEFINITIONAL_REPRESENTATION('',(#14526),#14530);+#14526 = LINE('',#14527,#14528);+#14527 = CARTESIAN_POINT('',(1.000000000003,9.314404469578E-02));+#14528 = VECTOR('',#14529,1.);+#14529 = DIRECTION('',(0.,-1.));+#14530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14531 = ORIENTED_EDGE('',*,*,#14532,.T.);+#14532 = EDGE_CURVE('',#14510,#14461,#14533,.T.);+#14533 = SURFACE_CURVE('',#14534,(#14538,#14545),.PCURVE_S1.);+#14534 = LINE('',#14535,#14536);+#14535 = CARTESIAN_POINT('',(0.199462039425,0.210692661498,+ 9.314404469578E-02));+#14536 = VECTOR('',#14537,1.);+#14537 = DIRECTION('',(0.,1.,0.));+#14538 = PCURVE('',#3170,#14539);+#14539 = DEFINITIONAL_REPRESENTATION('',(#14540),#14544);+#14540 = LINE('',#14541,#14542);+#14541 = CARTESIAN_POINT('',(0.,0.));+#14542 = VECTOR('',#14543,1.);+#14543 = DIRECTION('',(1.,0.));+#14544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14545 = PCURVE('',#4255,#14546);+#14546 = DEFINITIONAL_REPRESENTATION('',(#14547),#14551);+#14547 = LINE('',#14548,#14549);+#14548 = CARTESIAN_POINT('',(-0.395267411252,-1.01576380749));+#14549 = VECTOR('',#14550,1.);+#14550 = DIRECTION('',(0.,1.));+#14551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14552 = ORIENTED_EDGE('',*,*,#14460,.F.);+#14553 = ADVANCED_FACE('',(#14554),#3142,.F.);+#14554 = FACE_BOUND('',#14555,.F.);+#14555 = EDGE_LOOP('',(#14556,#14557,#14580,#14601));+#14556 = ORIENTED_EDGE('',*,*,#3126,.F.);+#14557 = ORIENTED_EDGE('',*,*,#14558,.F.);+#14558 = EDGE_CURVE('',#14559,#3094,#14561,.T.);+#14559 = VERTEX_POINT('',#14560);+#14560 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+ 9.314404469578E-02));+#14561 = SURFACE_CURVE('',#14562,(#14566,#14573),.PCURVE_S1.);+#14562 = LINE('',#14563,#14564);+#14563 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+ 9.314404469578E-02));+#14564 = VECTOR('',#14565,1.);+#14565 = DIRECTION('',(2.62897119786E-10,0.,-1.));+#14566 = PCURVE('',#3142,#14567);+#14567 = DEFINITIONAL_REPRESENTATION('',(#14568),#14572);+#14568 = LINE('',#14569,#14570);+#14569 = CARTESIAN_POINT('',(0.,0.));+#14570 = VECTOR('',#14571,1.);+#14571 = DIRECTION('',(-2.62897119786E-10,1.));+#14572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14573 = PCURVE('',#3114,#14574);+#14574 = DEFINITIONAL_REPRESENTATION('',(#14575),#14579);+#14575 = LINE('',#14576,#14577);+#14576 = CARTESIAN_POINT('',(1.570796327003,0.));+#14577 = VECTOR('',#14578,1.);+#14578 = DIRECTION('',(-2.62897119786E-09,1.));+#14579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14580 = ORIENTED_EDGE('',*,*,#14581,.T.);+#14581 = EDGE_CURVE('',#14559,#14510,#14582,.T.);+#14582 = SURFACE_CURVE('',#14583,(#14587,#14594),.PCURVE_S1.);+#14583 = LINE('',#14584,#14585);+#14584 = CARTESIAN_POINT('',(1.199462039428,0.210692661561,+ 9.314404469578E-02));+#14585 = VECTOR('',#14586,1.);+#14586 = DIRECTION('',(-1.,-6.308537026077E-11,0.));+#14587 = PCURVE('',#3142,#14588);+#14588 = DEFINITIONAL_REPRESENTATION('',(#14589),#14593);+#14589 = LINE('',#14590,#14591);+#14590 = CARTESIAN_POINT('',(0.,0.));+#14591 = VECTOR('',#14592,1.);+#14592 = DIRECTION('',(1.,0.));+#14593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14594 = PCURVE('',#4255,#14595);+#14595 = DEFINITIONAL_REPRESENTATION('',(#14596),#14600);+#14596 = LINE('',#14597,#14598);+#14597 = CARTESIAN_POINT('',(0.604732588751,-1.015763807427));+#14598 = VECTOR('',#14599,1.);+#14599 = DIRECTION('',(-1.,-6.308537026077E-11));+#14600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14601 = ORIENTED_EDGE('',*,*,#14509,.F.);+#14602 = ADVANCED_FACE('',(#14603),#3114,.F.);+#14603 = FACE_BOUND('',#14604,.F.);+#14604 = EDGE_LOOP('',(#14605,#14606,#14629,#14655));+#14605 = ORIENTED_EDGE('',*,*,#3093,.F.);+#14606 = ORIENTED_EDGE('',*,*,#14607,.T.);+#14607 = EDGE_CURVE('',#3066,#14608,#14610,.T.);+#14608 = VERTEX_POINT('',#14609);+#14609 = CARTESIAN_POINT('',(1.299462039438,0.31069266149,+ 9.314404469578E-02));+#14610 = SURFACE_CURVE('',#14611,(#14615,#14622),.PCURVE_S1.);+#14611 = LINE('',#14612,#14613);+#14612 = CARTESIAN_POINT('',(1.299462039433,0.310692661534,0.));+#14613 = VECTOR('',#14614,1.);+#14614 = DIRECTION('',(0.,-1.345166186988E-11,1.));+#14615 = PCURVE('',#3114,#14616);+#14616 = DEFINITIONAL_REPRESENTATION('',(#14617),#14621);+#14617 = LINE('',#14618,#14619);+#14618 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14619 = VECTOR('',#14620,1.);+#14620 = DIRECTION('',(0.,-1.));+#14621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14622 = PCURVE('',#3081,#14623);+#14623 = DEFINITIONAL_REPRESENTATION('',(#14624),#14628);+#14624 = LINE('',#14625,#14626);+#14625 = CARTESIAN_POINT('',(1.849906848574,9.314404469578E-02));+#14626 = VECTOR('',#14627,1.);+#14627 = DIRECTION('',(1.345166186988E-11,-1.));+#14628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14629 = ORIENTED_EDGE('',*,*,#14630,.T.);+#14630 = EDGE_CURVE('',#14608,#14559,#14631,.T.);+#14631 = SURFACE_CURVE('',#14632,(#14637,#14644),.PCURVE_S1.);+#14632 = CIRCLE('',#14633,9.999999999127E-02);+#14633 = AXIS2_PLACEMENT_3D('',#14634,#14635,#14636);+#14634 = CARTESIAN_POINT('',(1.199462039447,0.310692661553,+ 9.314404469578E-02));+#14635 = DIRECTION('',(0.,0.,-1.));+#14636 = DIRECTION('',(1.,-6.266553942972E-10,0.));+#14637 = PCURVE('',#3114,#14638);+#14638 = DEFINITIONAL_REPRESENTATION('',(#14639),#14643);+#14639 = LINE('',#14640,#14641);+#14640 = CARTESIAN_POINT('',(0.,0.));+#14641 = VECTOR('',#14642,1.);+#14642 = DIRECTION('',(1.,0.));+#14643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14644 = PCURVE('',#4255,#14645);+#14645 = DEFINITIONAL_REPRESENTATION('',(#14646),#14654);+#14646 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14647,#14648,#14649,#14650+ ,#14651,#14652,#14653),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14647 = CARTESIAN_POINT('',(0.704732588761,-0.915763807498));+#14648 = CARTESIAN_POINT('',(0.704732588653,-1.088968888239));+#14649 = CARTESIAN_POINT('',(0.55473258872,-1.002366347775));+#14650 = CARTESIAN_POINT('',(0.404732588787,-0.91576380731));+#14651 = CARTESIAN_POINT('',(0.554732588829,-0.829161267033));+#14652 = CARTESIAN_POINT('',(0.70473258887,-0.742558726756));+#14653 = CARTESIAN_POINT('',(0.704732588761,-0.915763807498));+#14654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14655 = ORIENTED_EDGE('',*,*,#14558,.T.);+#14656 = ADVANCED_FACE('',(#14657),#3081,.F.);+#14657 = FACE_BOUND('',#14658,.F.);+#14658 = EDGE_LOOP('',(#14659,#14660,#14683,#14704));+#14659 = ORIENTED_EDGE('',*,*,#3065,.F.);+#14660 = ORIENTED_EDGE('',*,*,#14661,.F.);+#14661 = EDGE_CURVE('',#14662,#3034,#14664,.T.);+#14662 = VERTEX_POINT('',#14663);+#14663 = CARTESIAN_POINT('',(1.299462039425,2.160599510056,+ 9.314404469578E-02));+#14664 = SURFACE_CURVE('',#14665,(#14669,#14676),.PCURVE_S1.);+#14665 = LINE('',#14666,#14667);+#14666 = CARTESIAN_POINT('',(1.299462039425,2.160599510056,+ 9.314404469578E-02));+#14667 = VECTOR('',#14668,1.);+#14668 = DIRECTION('',(0.,4.359647198199E-11,-1.));+#14669 = PCURVE('',#3081,#14670);+#14670 = DEFINITIONAL_REPRESENTATION('',(#14671),#14675);+#14671 = LINE('',#14672,#14673);+#14672 = CARTESIAN_POINT('',(5.200018193818E-11,0.));+#14673 = VECTOR('',#14674,1.);+#14674 = DIRECTION('',(-4.359647198199E-11,1.));+#14675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14676 = PCURVE('',#3054,#14677);+#14677 = DEFINITIONAL_REPRESENTATION('',(#14678),#14682);+#14678 = LINE('',#14679,#14680);+#14679 = CARTESIAN_POINT('',(1.570796327285,0.));+#14680 = VECTOR('',#14681,1.);+#14681 = DIRECTION('',(-4.359647198199E-10,1.));+#14682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14683 = ORIENTED_EDGE('',*,*,#14684,.T.);+#14684 = EDGE_CURVE('',#14662,#14608,#14685,.T.);+#14685 = SURFACE_CURVE('',#14686,(#14690,#14697),.PCURVE_S1.);+#14686 = LINE('',#14687,#14688);+#14687 = CARTESIAN_POINT('',(1.299462039425,2.160599510056,+ 9.314404469578E-02));+#14688 = VECTOR('',#14689,1.);+#14689 = DIRECTION('',(4.464281538052E-12,-1.,0.));+#14690 = PCURVE('',#3081,#14691);+#14691 = DEFINITIONAL_REPRESENTATION('',(#14692),#14696);+#14692 = LINE('',#14693,#14694);+#14693 = CARTESIAN_POINT('',(5.200018193818E-11,0.));+#14694 = VECTOR('',#14695,1.);+#14695 = DIRECTION('',(1.,0.));+#14696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14697 = PCURVE('',#4255,#14698);+#14698 = DEFINITIONAL_REPRESENTATION('',(#14699),#14703);+#14699 = LINE('',#14700,#14701);+#14700 = CARTESIAN_POINT('',(0.704732588748,0.934143041068));+#14701 = VECTOR('',#14702,1.);+#14702 = DIRECTION('',(4.464281538052E-12,-1.));+#14703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14704 = ORIENTED_EDGE('',*,*,#14607,.F.);+#14705 = ADVANCED_FACE('',(#14706),#3054,.F.);+#14706 = FACE_BOUND('',#14707,.F.);+#14707 = EDGE_LOOP('',(#14708,#14709,#14732,#14757));+#14708 = ORIENTED_EDGE('',*,*,#3033,.F.);+#14709 = ORIENTED_EDGE('',*,*,#14710,.T.);+#14710 = EDGE_CURVE('',#3006,#14711,#14713,.T.);+#14711 = VERTEX_POINT('',#14712);+#14712 = CARTESIAN_POINT('',(1.199462039255,2.260599510107,+ 9.314404469578E-02));+#14713 = SURFACE_CURVE('',#14714,(#14718,#14725),.PCURVE_S1.);+#14714 = LINE('',#14715,#14716);+#14715 = CARTESIAN_POINT('',(1.199462039364,2.260599510119,0.));+#14716 = VECTOR('',#14717,1.);+#14717 = DIRECTION('',(-6.123959802851E-11,0.,1.));+#14718 = PCURVE('',#3054,#14719);+#14719 = DEFINITIONAL_REPRESENTATION('',(#14720),#14724);+#14720 = LINE('',#14721,#14722);+#14721 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14722 = VECTOR('',#14723,1.);+#14723 = DIRECTION('',(0.,-1.));+#14724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14725 = PCURVE('',#3021,#14726);+#14726 = DEFINITIONAL_REPRESENTATION('',(#14727),#14731);+#14727 = LINE('',#14728,#14729);+#14728 = CARTESIAN_POINT('',(0.99995948426,9.314404469578E-02));+#14729 = VECTOR('',#14730,1.);+#14730 = DIRECTION('',(-6.123959802851E-11,-1.));+#14731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14732 = ORIENTED_EDGE('',*,*,#14733,.T.);+#14733 = EDGE_CURVE('',#14711,#14662,#14734,.T.);+#14734 = SURFACE_CURVE('',#14735,(#14740,#14746),.PCURVE_S1.);+#14735 = CIRCLE('',#14736,0.100000000003);+#14736 = AXIS2_PLACEMENT_3D('',#14737,#14738,#14739);+#14737 = CARTESIAN_POINT('',(1.19946203941,2.160599510105,+ 9.314404469578E-02));+#14738 = DIRECTION('',(0.,0.,-1.));+#14739 = DIRECTION('',(-1.55373935935E-09,1.,0.));+#14740 = PCURVE('',#3054,#14741);+#14741 = DEFINITIONAL_REPRESENTATION('',(#14742),#14745);+#14742 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14743,#14744),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.570796328839),.PIECEWISE_BEZIER_KNOTS.);+#14743 = CARTESIAN_POINT('',(0.,0.));+#14744 = CARTESIAN_POINT('',(1.570796327285,0.));+#14745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14746 = PCURVE('',#4255,#14747);+#14747 = DEFINITIONAL_REPRESENTATION('',(#14748),#14756);+#14748 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14749,#14750,#14751,#14752+ ,#14753,#14754,#14755),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14749 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#14750 = CARTESIAN_POINT('',(0.77793766934,1.034143041389));+#14751 = CARTESIAN_POINT('',(0.691335129192,0.88414304125));+#14752 = CARTESIAN_POINT('',(0.604732589044,0.734143041111));+#14753 = CARTESIAN_POINT('',(0.51813004843,0.884143040981));+#14754 = CARTESIAN_POINT('',(0.431527507816,1.034143040851));+#14755 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#14756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14757 = ORIENTED_EDGE('',*,*,#14661,.T.);+#14758 = ADVANCED_FACE('',(#14759),#3021,.F.);+#14759 = FACE_BOUND('',#14760,.F.);+#14760 = EDGE_LOOP('',(#14761,#14762,#14785,#14806));+#14761 = ORIENTED_EDGE('',*,*,#3005,.F.);+#14762 = ORIENTED_EDGE('',*,*,#14763,.T.);+#14763 = EDGE_CURVE('',#2978,#14764,#14766,.T.);+#14764 = VERTEX_POINT('',#14765);+#14765 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,+ 9.314404469578E-02));+#14766 = SURFACE_CURVE('',#14767,(#14771,#14778),.PCURVE_S1.);+#14767 = LINE('',#14768,#14769);+#14768 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,0.));+#14769 = VECTOR('',#14770,1.);+#14770 = DIRECTION('',(0.,0.,1.));+#14771 = PCURVE('',#3021,#14772);+#14772 = DEFINITIONAL_REPRESENTATION('',(#14773),#14777);+#14773 = LINE('',#14774,#14775);+#14774 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#14775 = VECTOR('',#14776,1.);+#14776 = DIRECTION('',(0.,-1.));+#14777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14778 = PCURVE('',#2993,#14779);+#14779 = DEFINITIONAL_REPRESENTATION('',(#14780),#14784);+#14780 = LINE('',#14781,#14782);+#14781 = CARTESIAN_POINT('',(0.199906852714,9.314404469578E-02));+#14782 = VECTOR('',#14783,1.);+#14783 = DIRECTION('',(0.,-1.));+#14784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14785 = ORIENTED_EDGE('',*,*,#14786,.T.);+#14786 = EDGE_CURVE('',#14764,#14711,#14787,.T.);+#14787 = SURFACE_CURVE('',#14788,(#14792,#14799),.PCURVE_S1.);+#14788 = LINE('',#14789,#14790);+#14789 = CARTESIAN_POINT('',(0.199502555104,2.260599510107,+ 9.314404469578E-02));+#14790 = VECTOR('',#14791,1.);+#14791 = DIRECTION('',(1.,1.17843846365E-11,0.));+#14792 = PCURVE('',#3021,#14793);+#14793 = DEFINITIONAL_REPRESENTATION('',(#14794),#14798);+#14794 = LINE('',#14795,#14796);+#14795 = CARTESIAN_POINT('',(0.,0.));+#14796 = VECTOR('',#14797,1.);+#14797 = DIRECTION('',(1.,0.));+#14798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14799 = PCURVE('',#4255,#14800);+#14800 = DEFINITIONAL_REPRESENTATION('',(#14801),#14805);+#14801 = LINE('',#14802,#14803);+#14802 = CARTESIAN_POINT('',(-0.395226895573,1.034143041119));+#14803 = VECTOR('',#14804,1.);+#14804 = DIRECTION('',(1.,1.17843846365E-11));+#14805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14806 = ORIENTED_EDGE('',*,*,#14710,.F.);+#14807 = ADVANCED_FACE('',(#14808),#2993,.F.);+#14808 = FACE_BOUND('',#14809,.F.);+#14809 = EDGE_LOOP('',(#14810,#14811,#14834,#14855));+#14810 = ORIENTED_EDGE('',*,*,#2977,.F.);+#14811 = ORIENTED_EDGE('',*,*,#14812,.T.);+#14812 = EDGE_CURVE('',#2950,#14813,#14815,.T.);+#14813 = VERTEX_POINT('',#14814);+#14814 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,+ 9.314404469578E-02));+#14815 = SURFACE_CURVE('',#14816,(#14820,#14827),.PCURVE_S1.);+#14816 = LINE('',#14817,#14818);+#14817 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,0.));+#14818 = VECTOR('',#14819,1.);+#14819 = DIRECTION('',(0.,0.,1.));+#14820 = PCURVE('',#2993,#14821);+#14821 = DEFINITIONAL_REPRESENTATION('',(#14822),#14826);+#14822 = LINE('',#14823,#14824);+#14823 = CARTESIAN_POINT('',(2.999822674683E-12,9.314404469578E-02));+#14824 = VECTOR('',#14825,1.);+#14825 = DIRECTION('',(0.,-1.));+#14826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14827 = PCURVE('',#2965,#14828);+#14828 = DEFINITIONAL_REPRESENTATION('',(#14829),#14833);+#14829 = LINE('',#14830,#14831);+#14830 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#14831 = VECTOR('',#14832,1.);+#14832 = DIRECTION('',(0.,1.));+#14833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14834 = ORIENTED_EDGE('',*,*,#14835,.T.);+#14835 = EDGE_CURVE('',#14813,#14764,#14836,.T.);+#14836 = SURFACE_CURVE('',#14837,(#14841,#14848),.PCURVE_S1.);+#14837 = LINE('',#14838,#14839);+#14838 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,+ 9.314404469578E-02));+#14839 = VECTOR('',#14840,1.);+#14840 = DIRECTION('',(2.026727863385E-04,0.999999979462,0.));+#14841 = PCURVE('',#2993,#14842);+#14842 = DEFINITIONAL_REPRESENTATION('',(#14843),#14847);+#14843 = LINE('',#14844,#14845);+#14844 = CARTESIAN_POINT('',(2.999822674683E-12,0.));+#14845 = VECTOR('',#14846,1.);+#14846 = DIRECTION('',(1.,0.));+#14847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14848 = PCURVE('',#4255,#14849);+#14849 = DEFINITIONAL_REPRESENTATION('',(#14850),#14854);+#14850 = LINE('',#14851,#14852);+#14851 = CARTESIAN_POINT('',(-0.395267411252,0.834236192514));+#14852 = VECTOR('',#14853,1.);+#14853 = DIRECTION('',(2.026727863385E-04,0.999999979462));+#14854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14855 = ORIENTED_EDGE('',*,*,#14763,.F.);+#14856 = ADVANCED_FACE('',(#14857),#2965,.F.);+#14857 = FACE_BOUND('',#14858,.F.);+#14858 = EDGE_LOOP('',(#14859,#14860,#14883,#14904));+#14859 = ORIENTED_EDGE('',*,*,#2949,.T.);+#14860 = ORIENTED_EDGE('',*,*,#14861,.T.);+#14861 = EDGE_CURVE('',#2922,#14862,#14864,.T.);+#14862 = VERTEX_POINT('',#14863);+#14863 = CARTESIAN_POINT('',(7.446203942601E-02,2.060692661502,+ 9.314404469578E-02));+#14864 = SURFACE_CURVE('',#14865,(#14869,#14876),.PCURVE_S1.);+#14865 = LINE('',#14866,#14867);+#14866 = CARTESIAN_POINT('',(7.446203942601E-02,2.060692661502,0.));+#14867 = VECTOR('',#14868,1.);+#14868 = DIRECTION('',(0.,0.,1.));+#14869 = PCURVE('',#2965,#14870);+#14870 = DEFINITIONAL_REPRESENTATION('',(#14871),#14875);+#14871 = LINE('',#14872,#14873);+#14872 = CARTESIAN_POINT('',(7.500000659099E-02,-9.314404469578E-02));+#14873 = VECTOR('',#14874,1.);+#14874 = DIRECTION('',(0.,1.));+#14875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14876 = PCURVE('',#2937,#14877);+#14877 = DEFINITIONAL_REPRESENTATION('',(#14878),#14882);+#14878 = LINE('',#14879,#14880);+#14879 = CARTESIAN_POINT('',(8.276472679259E-02,9.314404469578E-02));+#14880 = VECTOR('',#14881,1.);+#14881 = DIRECTION('',(0.,-1.));+#14882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14883 = ORIENTED_EDGE('',*,*,#14884,.F.);+#14884 = EDGE_CURVE('',#14813,#14862,#14885,.T.);+#14885 = SURFACE_CURVE('',#14886,(#14890,#14897),.PCURVE_S1.);+#14886 = LINE('',#14887,#14888);+#14887 = CARTESIAN_POINT('',(0.199462039425,2.060692661502,+ 9.314404469578E-02));+#14888 = VECTOR('',#14889,1.);+#14889 = DIRECTION('',(-1.,0.,0.));+#14890 = PCURVE('',#2965,#14891);+#14891 = DEFINITIONAL_REPRESENTATION('',(#14892),#14896);+#14892 = LINE('',#14893,#14894);+#14893 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#14894 = VECTOR('',#14895,1.);+#14895 = DIRECTION('',(1.,0.));+#14896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14897 = PCURVE('',#4255,#14898);+#14898 = DEFINITIONAL_REPRESENTATION('',(#14899),#14903);+#14899 = LINE('',#14900,#14901);+#14900 = CARTESIAN_POINT('',(-0.395267411252,0.834236192514));+#14901 = VECTOR('',#14902,1.);+#14902 = DIRECTION('',(-1.,0.));+#14903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14904 = ORIENTED_EDGE('',*,*,#14812,.F.);+#14905 = ADVANCED_FACE('',(#14906),#2937,.F.);+#14906 = FACE_BOUND('',#14907,.F.);+#14907 = EDGE_LOOP('',(#14908,#14909,#14930,#14931));+#14908 = ORIENTED_EDGE('',*,*,#5289,.T.);+#14909 = ORIENTED_EDGE('',*,*,#14910,.T.);+#14910 = EDGE_CURVE('',#5267,#14862,#14911,.T.);+#14911 = SURFACE_CURVE('',#14912,(#14916,#14923),.PCURVE_S1.);+#14912 = LINE('',#14913,#14914);+#14913 = CARTESIAN_POINT('',(0.,2.025943709769,9.314404469578E-02));+#14914 = VECTOR('',#14915,1.);+#14915 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#14916 = PCURVE('',#2937,#14917);+#14917 = DEFINITIONAL_REPRESENTATION('',(#14918),#14922);+#14918 = LINE('',#14919,#14920);+#14919 = CARTESIAN_POINT('',(5.936554716987E-04,0.));+#14920 = VECTOR('',#14921,1.);+#14921 = DIRECTION('',(1.,0.));+#14922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14923 = PCURVE('',#4255,#14924);+#14924 = DEFINITIONAL_REPRESENTATION('',(#14925),#14929);+#14925 = LINE('',#14926,#14927);+#14926 = CARTESIAN_POINT('',(-0.594729450677,0.799487240781));+#14927 = VECTOR('',#14928,1.);+#14928 = DIRECTION('',(0.90618313999,0.422885465342));+#14929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14930 = ORIENTED_EDGE('',*,*,#14861,.F.);+#14931 = ORIENTED_EDGE('',*,*,#2921,.F.);+#14932 = ADVANCED_FACE('',(#14933),#4255,.F.);+#14933 = FACE_BOUND('',#14934,.F.);+#14934 = EDGE_LOOP('',(#14935,#14936,#14937,#14938,#14939,#14940,#14941,+ #14942,#14943,#14944,#14945,#14946,#14947,#14948,#14971,#14999,+ #15020,#15021,#15022,#15045,#15068,#15091,#15112,#15113,#15136,+ #15164,#15185,#15186,#15209,#15232,#15255,#15278,#15299,#15300,+ #15323,#15351,#15372,#15373,#15396,#15419,#15442,#15465,#15486,+ #15487,#15510,#15538));+#14935 = ORIENTED_EDGE('',*,*,#4656,.F.);+#14936 = ORIENTED_EDGE('',*,*,#14435,.F.);+#14937 = ORIENTED_EDGE('',*,*,#14483,.T.);+#14938 = ORIENTED_EDGE('',*,*,#14532,.F.);+#14939 = ORIENTED_EDGE('',*,*,#14581,.F.);+#14940 = ORIENTED_EDGE('',*,*,#14630,.F.);+#14941 = ORIENTED_EDGE('',*,*,#14684,.F.);+#14942 = ORIENTED_EDGE('',*,*,#14733,.F.);+#14943 = ORIENTED_EDGE('',*,*,#14786,.F.);+#14944 = ORIENTED_EDGE('',*,*,#14835,.F.);+#14945 = ORIENTED_EDGE('',*,*,#14884,.T.);+#14946 = ORIENTED_EDGE('',*,*,#14910,.F.);+#14947 = ORIENTED_EDGE('',*,*,#5266,.F.);+#14948 = ORIENTED_EDGE('',*,*,#14949,.T.);+#14949 = EDGE_CURVE('',#5239,#14950,#14952,.T.);+#14950 = VERTEX_POINT('',#14951);+#14951 = CARTESIAN_POINT('',(4.317709717067E-02,1.975983918052,+ 9.314404469578E-02));+#14952 = SURFACE_CURVE('',#14953,(#14957,#14964),.PCURVE_S1.);+#14953 = LINE('',#14954,#14955);+#14954 = CARTESIAN_POINT('',(0.,1.975983918052,9.314404469578E-02));+#14955 = VECTOR('',#14956,1.);+#14956 = DIRECTION('',(1.,0.,0.));+#14957 = PCURVE('',#4255,#14958);+#14958 = DEFINITIONAL_REPRESENTATION('',(#14959),#14963);+#14959 = LINE('',#14960,#14961);+#14960 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#14961 = VECTOR('',#14962,1.);+#14962 = DIRECTION('',(1.,0.));+#14963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14964 = PCURVE('',#5254,#14965);+#14965 = DEFINITIONAL_REPRESENTATION('',(#14966),#14970);+#14966 = LINE('',#14967,#14968);+#14967 = CARTESIAN_POINT('',(5.92586848756E-02,0.1));+#14968 = VECTOR('',#14969,1.);+#14969 = DIRECTION('',(-1.,-0.));+#14970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14971 = ORIENTED_EDGE('',*,*,#14972,.T.);+#14972 = EDGE_CURVE('',#14950,#14973,#14975,.T.);+#14973 = VERTEX_POINT('',#14974);+#14974 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+ 9.314404469578E-02));+#14975 = SURFACE_CURVE('',#14976,(#14980,#14987),.PCURVE_S1.);+#14976 = LINE('',#14977,#14978);+#14977 = CARTESIAN_POINT('',(4.317709717067E-02,1.975983918052,+ 9.314404469578E-02));+#14978 = VECTOR('',#14979,1.);+#14979 = DIRECTION('',(0.,-1.,0.));+#14980 = PCURVE('',#4255,#14981);+#14981 = DEFINITIONAL_REPRESENTATION('',(#14982),#14986);+#14982 = LINE('',#14983,#14984);+#14983 = CARTESIAN_POINT('',(-0.551552353506,0.749527449064));+#14984 = VECTOR('',#14985,1.);+#14985 = DIRECTION('',(0.,-1.));+#14986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14987 = PCURVE('',#14988,#14993);+#14988 = PLANE('',#14989);+#14989 = AXIS2_PLACEMENT_3D('',#14990,#14991,#14992);+#14990 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+ 0.193144044696));+#14991 = DIRECTION('',(-1.,0.,0.));+#14992 = DIRECTION('',(0.,-1.,0.));+#14993 = DEFINITIONAL_REPRESENTATION('',(#14994),#14998);+#14994 = LINE('',#14995,#14996);+#14995 = CARTESIAN_POINT('',(0.513750127434,-0.1));+#14996 = VECTOR('',#14997,1.);+#14997 = DIRECTION('',(1.,0.));+#14998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14999 = ORIENTED_EDGE('',*,*,#15000,.T.);+#15000 = EDGE_CURVE('',#14973,#5160,#15001,.T.);+#15001 = SURFACE_CURVE('',#15002,(#15006,#15013),.PCURVE_S1.);+#15002 = LINE('',#15003,#15004);+#15003 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+ 9.314404469578E-02));+#15004 = VECTOR('',#15005,1.);+#15005 = DIRECTION('',(-1.,0.,0.));+#15006 = PCURVE('',#4255,#15007);+#15007 = DEFINITIONAL_REPRESENTATION('',(#15008),#15012);+#15008 = LINE('',#15009,#15010);+#15009 = CARTESIAN_POINT('',(-0.551552353506,0.669527449065));+#15010 = VECTOR('',#15011,1.);+#15011 = DIRECTION('',(-1.,0.));+#15012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15013 = PCURVE('',#5198,#15014);+#15014 = DEFINITIONAL_REPRESENTATION('',(#15015),#15019);+#15015 = LINE('',#15016,#15017);+#15016 = CARTESIAN_POINT('',(0.118918412304,0.1));+#15017 = VECTOR('',#15018,1.);+#15018 = DIRECTION('',(-1.,0.));+#15019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15020 = ORIENTED_EDGE('',*,*,#5159,.F.);+#15021 = ORIENTED_EDGE('',*,*,#4241,.F.);+#15022 = ORIENTED_EDGE('',*,*,#15023,.T.);+#15023 = EDGE_CURVE('',#4219,#15024,#15026,.T.);+#15024 = VERTEX_POINT('',#15025);+#15025 = CARTESIAN_POINT('',(0.199462039425,1.810692661497,+ 9.314404469578E-02));+#15026 = SURFACE_CURVE('',#15027,(#15031,#15038),.PCURVE_S1.);+#15027 = LINE('',#15028,#15029);+#15028 = CARTESIAN_POINT('',(7.446203942115E-02,1.810692661497,+ 9.314404469578E-02));+#15029 = VECTOR('',#15030,1.);+#15030 = DIRECTION('',(1.,0.,0.));+#15031 = PCURVE('',#4255,#15032);+#15032 = DEFINITIONAL_REPRESENTATION('',(#15033),#15037);+#15033 = LINE('',#15034,#15035);+#15034 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#15035 = VECTOR('',#15036,1.);+#15036 = DIRECTION('',(1.,0.));+#15037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15038 = PCURVE('',#696,#15039);+#15039 = DEFINITIONAL_REPRESENTATION('',(#15040),#15044);+#15040 = LINE('',#15041,#15042);+#15041 = CARTESIAN_POINT('',(-6.599270005458E-09,0.));+#15042 = VECTOR('',#15043,1.);+#15043 = DIRECTION('',(1.,0.));+#15044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15045 = ORIENTED_EDGE('',*,*,#15046,.F.);+#15046 = EDGE_CURVE('',#15047,#15024,#15049,.T.);+#15047 = VERTEX_POINT('',#15048);+#15048 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,+ 9.314404469578E-02));+#15049 = SURFACE_CURVE('',#15050,(#15054,#15061),.PCURVE_S1.);+#15050 = LINE('',#15051,#15052);+#15051 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,+ 9.314404469578E-02));+#15052 = VECTOR('',#15053,1.);+#15053 = DIRECTION('',(0.,1.,0.));+#15054 = PCURVE('',#4255,#15055);+#15055 = DEFINITIONAL_REPRESENTATION('',(#15056),#15060);+#15056 = LINE('',#15057,#15058);+#15057 = CARTESIAN_POINT('',(-0.395267411252,0.334236192513));+#15058 = VECTOR('',#15059,1.);+#15059 = DIRECTION('',(0.,1.));+#15060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15061 = PCURVE('',#670,#15062);+#15062 = DEFINITIONAL_REPRESENTATION('',(#15063),#15067);+#15063 = LINE('',#15064,#15065);+#15064 = CARTESIAN_POINT('',(3.000044657142E-12,0.));+#15065 = VECTOR('',#15066,1.);+#15066 = DIRECTION('',(1.,0.));+#15067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15068 = ORIENTED_EDGE('',*,*,#15069,.T.);+#15069 = EDGE_CURVE('',#15047,#15070,#15072,.T.);+#15070 = VERTEX_POINT('',#15071);+#15071 = CARTESIAN_POINT('',(7.446203942237E-02,1.560692661501,+ 9.314404469578E-02));+#15072 = SURFACE_CURVE('',#15073,(#15077,#15084),.PCURVE_S1.);+#15073 = LINE('',#15074,#15075);+#15074 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,+ 9.314404469578E-02));+#15075 = VECTOR('',#15076,1.);+#15076 = DIRECTION('',(-1.,0.,0.));+#15077 = PCURVE('',#4255,#15078);+#15078 = DEFINITIONAL_REPRESENTATION('',(#15079),#15083);+#15079 = LINE('',#15080,#15081);+#15080 = CARTESIAN_POINT('',(-0.395267411252,0.334236192513));+#15081 = VECTOR('',#15082,1.);+#15082 = DIRECTION('',(-1.,0.));+#15083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15084 = PCURVE('',#642,#15085);+#15085 = DEFINITIONAL_REPRESENTATION('',(#15086),#15090);+#15086 = LINE('',#15087,#15088);+#15087 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#15088 = VECTOR('',#15089,1.);+#15089 = DIRECTION('',(1.,0.));+#15090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15091 = ORIENTED_EDGE('',*,*,#15092,.F.);+#15092 = EDGE_CURVE('',#5114,#15070,#15093,.T.);+#15093 = SURFACE_CURVE('',#15094,(#15098,#15105),.PCURVE_S1.);+#15094 = LINE('',#15095,#15096);+#15095 = CARTESIAN_POINT('',(0.,1.525943709769,9.314404469578E-02));+#15096 = VECTOR('',#15097,1.);+#15097 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#15098 = PCURVE('',#4255,#15099);+#15099 = DEFINITIONAL_REPRESENTATION('',(#15100),#15104);+#15100 = LINE('',#15101,#15102);+#15101 = CARTESIAN_POINT('',(-0.594729450677,0.299487240781));+#15102 = VECTOR('',#15103,1.);+#15103 = DIRECTION('',(0.90618313999,0.422885465342));+#15104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15105 = PCURVE('',#614,#15106);+#15106 = DEFINITIONAL_REPRESENTATION('',(#15107),#15111);+#15107 = LINE('',#15108,#15109);+#15108 = CARTESIAN_POINT('',(5.936554716993E-04,0.));+#15109 = VECTOR('',#15110,1.);+#15110 = DIRECTION('',(1.,0.));+#15111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15112 = ORIENTED_EDGE('',*,*,#5113,.F.);+#15113 = ORIENTED_EDGE('',*,*,#15114,.T.);+#15114 = EDGE_CURVE('',#5086,#15115,#15117,.T.);+#15115 = VERTEX_POINT('',#15116);+#15116 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+ 9.314404469578E-02));+#15117 = SURFACE_CURVE('',#15118,(#15122,#15129),.PCURVE_S1.);+#15118 = LINE('',#15119,#15120);+#15119 = CARTESIAN_POINT('',(0.,1.47598391805,9.314404469578E-02));+#15120 = VECTOR('',#15121,1.);+#15121 = DIRECTION('',(1.,0.,0.));+#15122 = PCURVE('',#4255,#15123);+#15123 = DEFINITIONAL_REPRESENTATION('',(#15124),#15128);+#15124 = LINE('',#15125,#15126);+#15125 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#15126 = VECTOR('',#15127,1.);+#15127 = DIRECTION('',(1.,0.));+#15128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15129 = PCURVE('',#5101,#15130);+#15130 = DEFINITIONAL_REPRESENTATION('',(#15131),#15135);+#15131 = LINE('',#15132,#15133);+#15132 = CARTESIAN_POINT('',(5.92586848756E-02,0.1));+#15133 = VECTOR('',#15134,1.);+#15134 = DIRECTION('',(-1.,-0.));+#15135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15136 = ORIENTED_EDGE('',*,*,#15137,.T.);+#15137 = EDGE_CURVE('',#15115,#15138,#15140,.T.);+#15138 = VERTEX_POINT('',#15139);+#15139 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+ 9.314404469578E-02));+#15140 = SURFACE_CURVE('',#15141,(#15145,#15152),.PCURVE_S1.);+#15141 = LINE('',#15142,#15143);+#15142 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+ 9.314404469578E-02));+#15143 = VECTOR('',#15144,1.);+#15144 = DIRECTION('',(0.,-1.,0.));+#15145 = PCURVE('',#4255,#15146);+#15146 = DEFINITIONAL_REPRESENTATION('',(#15147),#15151);+#15147 = LINE('',#15148,#15149);+#15148 = CARTESIAN_POINT('',(-0.551552353506,0.249527449062));+#15149 = VECTOR('',#15150,1.);+#15150 = DIRECTION('',(0.,-1.));+#15151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15152 = PCURVE('',#15153,#15158);+#15153 = PLANE('',#15154);+#15154 = AXIS2_PLACEMENT_3D('',#15155,#15156,#15157);+#15155 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+ 0.193144044696));+#15156 = DIRECTION('',(-1.,0.,0.));+#15157 = DIRECTION('',(0.,-1.,0.));+#15158 = DEFINITIONAL_REPRESENTATION('',(#15159),#15163);+#15159 = LINE('',#15160,#15161);+#15160 = CARTESIAN_POINT('',(1.013750127436,-0.1));+#15161 = VECTOR('',#15162,1.);+#15162 = DIRECTION('',(1.,0.));+#15163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15164 = ORIENTED_EDGE('',*,*,#15165,.T.);+#15165 = EDGE_CURVE('',#15138,#5007,#15166,.T.);+#15166 = SURFACE_CURVE('',#15167,(#15171,#15178),.PCURVE_S1.);+#15167 = LINE('',#15168,#15169);+#15168 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+ 9.314404469578E-02));+#15169 = VECTOR('',#15170,1.);+#15170 = DIRECTION('',(-1.,0.,0.));+#15171 = PCURVE('',#4255,#15172);+#15172 = DEFINITIONAL_REPRESENTATION('',(#15173),#15177);+#15173 = LINE('',#15174,#15175);+#15174 = CARTESIAN_POINT('',(-0.551552353506,0.169527449064));+#15175 = VECTOR('',#15176,1.);+#15176 = DIRECTION('',(-1.,0.));+#15177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15178 = PCURVE('',#5045,#15179);+#15179 = DEFINITIONAL_REPRESENTATION('',(#15180),#15184);+#15180 = LINE('',#15181,#15182);+#15181 = CARTESIAN_POINT('',(0.118918412304,0.1));+#15182 = VECTOR('',#15183,1.);+#15183 = DIRECTION('',(-1.,0.));+#15184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15185 = ORIENTED_EDGE('',*,*,#5006,.F.);+#15186 = ORIENTED_EDGE('',*,*,#15187,.F.);+#15187 = EDGE_CURVE('',#15188,#4984,#15190,.T.);+#15188 = VERTEX_POINT('',#15189);+#15189 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+ 9.314404469578E-02));+#15190 = SURFACE_CURVE('',#15191,(#15195,#15202),.PCURVE_S1.);+#15191 = LINE('',#15192,#15193);+#15192 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+ 9.314404469578E-02));+#15193 = VECTOR('',#15194,1.);+#15194 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#15195 = PCURVE('',#4255,#15196);+#15196 = DEFINITIONAL_REPRESENTATION('',(#15197),#15201);+#15197 = LINE('',#15198,#15199);+#15198 = CARTESIAN_POINT('',(-0.520267411252,8.4236192507E-02));+#15199 = VECTOR('',#15200,1.);+#15200 = DIRECTION('',(-0.906183139987,0.422885465348));+#15201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15202 = PCURVE('',#734,#15203);+#15203 = DEFINITIONAL_REPRESENTATION('',(#15204),#15208);+#15204 = LINE('',#15205,#15206);+#15205 = CARTESIAN_POINT('',(-8.31567872547E-12,-0.));+#15206 = VECTOR('',#15207,1.);+#15207 = DIRECTION('',(1.,0.));+#15208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15209 = ORIENTED_EDGE('',*,*,#15210,.T.);+#15210 = EDGE_CURVE('',#15188,#15211,#15213,.T.);+#15211 = VERTEX_POINT('',#15212);+#15212 = CARTESIAN_POINT('',(0.199462039425,1.310692661495,+ 9.314404469578E-02));+#15213 = SURFACE_CURVE('',#15214,(#15218,#15225),.PCURVE_S1.);+#15214 = LINE('',#15215,#15216);+#15215 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+ 9.314404469578E-02));+#15216 = VECTOR('',#15217,1.);+#15217 = DIRECTION('',(1.,0.,0.));+#15218 = PCURVE('',#4255,#15219);+#15219 = DEFINITIONAL_REPRESENTATION('',(#15220),#15224);+#15220 = LINE('',#15221,#15222);+#15221 = CARTESIAN_POINT('',(-0.520267411252,8.4236192507E-02));+#15222 = VECTOR('',#15223,1.);+#15223 = DIRECTION('',(1.,0.));+#15224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15225 = PCURVE('',#867,#15226);+#15226 = DEFINITIONAL_REPRESENTATION('',(#15227),#15231);+#15227 = LINE('',#15228,#15229);+#15228 = CARTESIAN_POINT('',(-6.595630000494E-09,0.));+#15229 = VECTOR('',#15230,1.);+#15230 = DIRECTION('',(1.,0.));+#15231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15232 = ORIENTED_EDGE('',*,*,#15233,.F.);+#15233 = EDGE_CURVE('',#15234,#15211,#15236,.T.);+#15234 = VERTEX_POINT('',#15235);+#15235 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+ 9.314404469578E-02));+#15236 = SURFACE_CURVE('',#15237,(#15241,#15248),.PCURVE_S1.);+#15237 = LINE('',#15238,#15239);+#15238 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+ 9.314404469578E-02));+#15239 = VECTOR('',#15240,1.);+#15240 = DIRECTION('',(0.,1.,0.));+#15241 = PCURVE('',#4255,#15242);+#15242 = DEFINITIONAL_REPRESENTATION('',(#15243),#15247);+#15243 = LINE('',#15244,#15245);+#15244 = CARTESIAN_POINT('',(-0.395267411252,-0.165763807489));+#15245 = VECTOR('',#15246,1.);+#15246 = DIRECTION('',(0.,1.));+#15247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15248 = PCURVE('',#841,#15249);+#15249 = DEFINITIONAL_REPRESENTATION('',(#15250),#15254);+#15250 = LINE('',#15251,#15252);+#15251 = CARTESIAN_POINT('',(0.,0.));+#15252 = VECTOR('',#15253,1.);+#15253 = DIRECTION('',(1.,0.));+#15254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15255 = ORIENTED_EDGE('',*,*,#15256,.T.);+#15256 = EDGE_CURVE('',#15234,#15257,#15259,.T.);+#15257 = VERTEX_POINT('',#15258);+#15258 = CARTESIAN_POINT('',(7.446203941748E-02,1.060692661499,+ 9.314404469578E-02));+#15259 = SURFACE_CURVE('',#15260,(#15264,#15271),.PCURVE_S1.);+#15260 = LINE('',#15261,#15262);+#15261 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,+ 9.314404469578E-02));+#15262 = VECTOR('',#15263,1.);+#15263 = DIRECTION('',(-1.,0.,0.));+#15264 = PCURVE('',#4255,#15265);+#15265 = DEFINITIONAL_REPRESENTATION('',(#15266),#15270);+#15266 = LINE('',#15267,#15268);+#15267 = CARTESIAN_POINT('',(-0.395267411252,-0.165763807489));+#15268 = VECTOR('',#15269,1.);+#15269 = DIRECTION('',(-1.,0.));+#15270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15271 = PCURVE('',#813,#15272);+#15272 = DEFINITIONAL_REPRESENTATION('',(#15273),#15277);+#15273 = LINE('',#15274,#15275);+#15274 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#15275 = VECTOR('',#15276,1.);+#15276 = DIRECTION('',(1.,0.));+#15277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15278 = ORIENTED_EDGE('',*,*,#15279,.F.);+#15279 = EDGE_CURVE('',#4939,#15257,#15280,.T.);+#15280 = SURFACE_CURVE('',#15281,(#15285,#15292),.PCURVE_S1.);+#15281 = LINE('',#15282,#15283);+#15282 = CARTESIAN_POINT('',(0.,1.025943709769,9.314404469578E-02));+#15283 = VECTOR('',#15284,1.);+#15284 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#15285 = PCURVE('',#4255,#15286);+#15286 = DEFINITIONAL_REPRESENTATION('',(#15287),#15291);+#15287 = LINE('',#15288,#15289);+#15288 = CARTESIAN_POINT('',(-0.594729450677,-0.200512759219));+#15289 = VECTOR('',#15290,1.);+#15290 = DIRECTION('',(0.906183139987,0.422885465348));+#15291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15292 = PCURVE('',#785,#15293);+#15293 = DEFINITIONAL_REPRESENTATION('',(#15294),#15298);+#15294 = LINE('',#15295,#15296);+#15295 = CARTESIAN_POINT('',(5.936554721229E-04,0.));+#15296 = VECTOR('',#15297,1.);+#15297 = DIRECTION('',(1.,0.));+#15298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15299 = ORIENTED_EDGE('',*,*,#4938,.F.);+#15300 = ORIENTED_EDGE('',*,*,#15301,.T.);+#15301 = EDGE_CURVE('',#4911,#15302,#15304,.T.);+#15302 = VERTEX_POINT('',#15303);+#15303 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+ 9.314404469578E-02));+#15304 = SURFACE_CURVE('',#15305,(#15309,#15316),.PCURVE_S1.);+#15305 = LINE('',#15306,#15307);+#15306 = CARTESIAN_POINT('',(0.,0.975983918052,9.314404469578E-02));+#15307 = VECTOR('',#15308,1.);+#15308 = DIRECTION('',(1.,0.,0.));+#15309 = PCURVE('',#4255,#15310);+#15310 = DEFINITIONAL_REPRESENTATION('',(#15311),#15315);+#15311 = LINE('',#15312,#15313);+#15312 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550936));+#15313 = VECTOR('',#15314,1.);+#15314 = DIRECTION('',(1.,0.));+#15315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15316 = PCURVE('',#4926,#15317);+#15317 = DEFINITIONAL_REPRESENTATION('',(#15318),#15322);+#15318 = LINE('',#15319,#15320);+#15319 = CARTESIAN_POINT('',(5.92586848756E-02,0.1));+#15320 = VECTOR('',#15321,1.);+#15321 = DIRECTION('',(-1.,-0.));+#15322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15323 = ORIENTED_EDGE('',*,*,#15324,.T.);+#15324 = EDGE_CURVE('',#15302,#15325,#15327,.T.);+#15325 = VERTEX_POINT('',#15326);+#15326 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+ 9.314404469578E-02));+#15327 = SURFACE_CURVE('',#15328,(#15332,#15339),.PCURVE_S1.);+#15328 = LINE('',#15329,#15330);+#15329 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+ 9.314404469578E-02));+#15330 = VECTOR('',#15331,1.);+#15331 = DIRECTION('',(0.,-1.,0.));+#15332 = PCURVE('',#4255,#15333);+#15333 = DEFINITIONAL_REPRESENTATION('',(#15334),#15338);+#15334 = LINE('',#15335,#15336);+#15335 = CARTESIAN_POINT('',(-0.551552353506,-0.250472550936));+#15336 = VECTOR('',#15337,1.);+#15337 = DIRECTION('',(0.,-1.));+#15338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15339 = PCURVE('',#15340,#15345);+#15340 = PLANE('',#15341);+#15341 = AXIS2_PLACEMENT_3D('',#15342,#15343,#15344);+#15342 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+ 0.193144044696));+#15343 = DIRECTION('',(-1.,0.,0.));+#15344 = DIRECTION('',(0.,-1.,0.));+#15345 = DEFINITIONAL_REPRESENTATION('',(#15346),#15350);+#15346 = LINE('',#15347,#15348);+#15347 = CARTESIAN_POINT('',(1.513750127434,-0.1));+#15348 = VECTOR('',#15349,1.);+#15349 = DIRECTION('',(1.,0.));+#15350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15351 = ORIENTED_EDGE('',*,*,#15352,.T.);+#15352 = EDGE_CURVE('',#15325,#4832,#15353,.T.);+#15353 = SURFACE_CURVE('',#15354,(#15358,#15365),.PCURVE_S1.);+#15354 = LINE('',#15355,#15356);+#15355 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+ 9.314404469578E-02));+#15356 = VECTOR('',#15357,1.);+#15357 = DIRECTION('',(-1.,0.,0.));+#15358 = PCURVE('',#4255,#15359);+#15359 = DEFINITIONAL_REPRESENTATION('',(#15360),#15364);+#15360 = LINE('',#15361,#15362);+#15361 = CARTESIAN_POINT('',(-0.551552353506,-0.330472550938));+#15362 = VECTOR('',#15363,1.);+#15363 = DIRECTION('',(-1.,0.));+#15364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15365 = PCURVE('',#4870,#15366);+#15366 = DEFINITIONAL_REPRESENTATION('',(#15367),#15371);+#15367 = LINE('',#15368,#15369);+#15368 = CARTESIAN_POINT('',(0.118918412304,0.1));+#15369 = VECTOR('',#15370,1.);+#15370 = DIRECTION('',(-1.,0.));+#15371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15372 = ORIENTED_EDGE('',*,*,#4831,.F.);+#15373 = ORIENTED_EDGE('',*,*,#15374,.F.);+#15374 = EDGE_CURVE('',#15375,#4809,#15377,.T.);+#15375 = VERTEX_POINT('',#15376);+#15376 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,+ 9.314404469578E-02));+#15377 = SURFACE_CURVE('',#15378,(#15382,#15389),.PCURVE_S1.);+#15378 = LINE('',#15379,#15380);+#15379 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,+ 9.314404469578E-02));+#15380 = VECTOR('',#15381,1.);+#15381 = DIRECTION('',(-0.906183139959,0.422885465409,0.));+#15382 = PCURVE('',#4255,#15383);+#15383 = DEFINITIONAL_REPRESENTATION('',(#15384),#15388);+#15384 = LINE('',#15385,#15386);+#15385 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807486));+#15386 = VECTOR('',#15387,1.);+#15387 = DIRECTION('',(-0.906183139959,0.422885465409));+#15388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15389 = PCURVE('',#961,#15390);+#15390 = DEFINITIONAL_REPRESENTATION('',(#15391),#15395);+#15391 = LINE('',#15392,#15393);+#15392 = CARTESIAN_POINT('',(8.276472676626E-02,0.));+#15393 = VECTOR('',#15394,1.);+#15394 = DIRECTION('',(-1.,0.));+#15395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15396 = ORIENTED_EDGE('',*,*,#15397,.T.);+#15397 = EDGE_CURVE('',#15375,#15398,#15400,.T.);+#15398 = VERTEX_POINT('',#15399);+#15399 = CARTESIAN_POINT('',(0.199462039425,0.810692661502,+ 9.314404469578E-02));+#15400 = SURFACE_CURVE('',#15401,(#15405,#15412),.PCURVE_S1.);+#15401 = LINE('',#15402,#15403);+#15402 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,+ 9.314404469578E-02));+#15403 = VECTOR('',#15404,1.);+#15404 = DIRECTION('',(1.,0.,0.));+#15405 = PCURVE('',#4255,#15406);+#15406 = DEFINITIONAL_REPRESENTATION('',(#15407),#15411);+#15407 = LINE('',#15408,#15409);+#15408 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807486));+#15409 = VECTOR('',#15410,1.);+#15410 = DIRECTION('',(1.,0.));+#15411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15412 = PCURVE('',#933,#15413);+#15413 = DEFINITIONAL_REPRESENTATION('',(#15414),#15418);+#15414 = LINE('',#15415,#15416);+#15415 = CARTESIAN_POINT('',(-1.000588500943E-14,0.));+#15416 = VECTOR('',#15417,1.);+#15417 = DIRECTION('',(1.,0.));+#15418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15419 = ORIENTED_EDGE('',*,*,#15420,.F.);+#15420 = EDGE_CURVE('',#15421,#15398,#15423,.T.);+#15421 = VERTEX_POINT('',#15422);+#15422 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,+ 9.314404469578E-02));+#15423 = SURFACE_CURVE('',#15424,(#15428,#15435),.PCURVE_S1.);+#15424 = LINE('',#15425,#15426);+#15425 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,+ 9.314404469578E-02));+#15426 = VECTOR('',#15427,1.);+#15427 = DIRECTION('',(0.,1.,0.));+#15428 = PCURVE('',#4255,#15429);+#15429 = DEFINITIONAL_REPRESENTATION('',(#15430),#15434);+#15430 = LINE('',#15431,#15432);+#15431 = CARTESIAN_POINT('',(-0.395267411252,-0.665763807491));+#15432 = VECTOR('',#15433,1.);+#15433 = DIRECTION('',(0.,1.));+#15434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15435 = PCURVE('',#905,#15436);+#15436 = DEFINITIONAL_REPRESENTATION('',(#15437),#15441);+#15437 = LINE('',#15438,#15439);+#15438 = CARTESIAN_POINT('',(-1.99995575656E-12,0.));+#15439 = VECTOR('',#15440,1.);+#15440 = DIRECTION('',(1.,0.));+#15441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15442 = ORIENTED_EDGE('',*,*,#15443,.T.);+#15443 = EDGE_CURVE('',#15421,#15444,#15446,.T.);+#15444 = VERTEX_POINT('',#15445);+#15445 = CARTESIAN_POINT('',(7.446203941383E-02,0.560692661497,+ 9.314404469578E-02));+#15446 = SURFACE_CURVE('',#15447,(#15451,#15458),.PCURVE_S1.);+#15447 = LINE('',#15448,#15449);+#15448 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,+ 9.314404469578E-02));+#15449 = VECTOR('',#15450,1.);+#15450 = DIRECTION('',(-1.,0.,0.));+#15451 = PCURVE('',#4255,#15452);+#15452 = DEFINITIONAL_REPRESENTATION('',(#15453),#15457);+#15453 = LINE('',#15454,#15455);+#15454 = CARTESIAN_POINT('',(-0.395267411252,-0.665763807491));+#15455 = VECTOR('',#15456,1.);+#15456 = DIRECTION('',(-1.,0.));+#15457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15458 = PCURVE('',#1038,#15459);+#15459 = DEFINITIONAL_REPRESENTATION('',(#15460),#15464);+#15460 = LINE('',#15461,#15462);+#15461 = CARTESIAN_POINT('',(-4.9999993408E-02,0.));+#15462 = VECTOR('',#15463,1.);+#15463 = DIRECTION('',(1.,0.));+#15464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15465 = ORIENTED_EDGE('',*,*,#15466,.F.);+#15466 = EDGE_CURVE('',#4764,#15444,#15467,.T.);+#15467 = SURFACE_CURVE('',#15468,(#15472,#15479),.PCURVE_S1.);+#15468 = LINE('',#15469,#15470);+#15469 = CARTESIAN_POINT('',(0.,0.525943709769,9.314404469578E-02));+#15470 = VECTOR('',#15471,1.);+#15471 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#15472 = PCURVE('',#4255,#15473);+#15473 = DEFINITIONAL_REPRESENTATION('',(#15474),#15478);+#15474 = LINE('',#15475,#15476);+#15475 = CARTESIAN_POINT('',(-0.594729450677,-0.700512759219));+#15476 = VECTOR('',#15477,1.);+#15477 = DIRECTION('',(0.906183139987,0.422885465348));+#15478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15479 = PCURVE('',#1012,#15480);+#15480 = DEFINITIONAL_REPRESENTATION('',(#15481),#15485);+#15481 = LINE('',#15482,#15483);+#15482 = CARTESIAN_POINT('',(5.936554721235E-04,0.));+#15483 = VECTOR('',#15484,1.);+#15484 = DIRECTION('',(1.,0.));+#15485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15486 = ORIENTED_EDGE('',*,*,#4763,.F.);+#15487 = ORIENTED_EDGE('',*,*,#15488,.F.);+#15488 = EDGE_CURVE('',#15489,#4736,#15491,.T.);+#15489 = VERTEX_POINT('',#15490);+#15490 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+ 9.314404469578E-02));+#15491 = SURFACE_CURVE('',#15492,(#15496,#15503),.PCURVE_S1.);+#15492 = LINE('',#15493,#15494);+#15493 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+ 9.314404469578E-02));+#15494 = VECTOR('',#15495,1.);+#15495 = DIRECTION('',(-1.,0.,0.));+#15496 = PCURVE('',#4255,#15497);+#15497 = DEFINITIONAL_REPRESENTATION('',(#15498),#15502);+#15498 = LINE('',#15499,#15500);+#15499 = CARTESIAN_POINT('',(-0.551552353506,-0.750472550933));+#15500 = VECTOR('',#15501,1.);+#15501 = DIRECTION('',(-1.,0.));+#15502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15503 = PCURVE('',#4751,#15504);+#15504 = DEFINITIONAL_REPRESENTATION('',(#15505),#15509);+#15505 = LINE('',#15506,#15507);+#15506 = CARTESIAN_POINT('',(1.608158770494E-02,0.1));+#15507 = VECTOR('',#15508,1.);+#15508 = DIRECTION('',(1.,0.));+#15509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15510 = ORIENTED_EDGE('',*,*,#15511,.T.);+#15511 = EDGE_CURVE('',#15489,#15512,#15514,.T.);+#15512 = VERTEX_POINT('',#15513);+#15513 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+ 9.314404469578E-02));+#15514 = SURFACE_CURVE('',#15515,(#15519,#15526),.PCURVE_S1.);+#15515 = LINE('',#15516,#15517);+#15516 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+ 9.314404469578E-02));+#15517 = VECTOR('',#15518,1.);+#15518 = DIRECTION('',(0.,-1.,0.));+#15519 = PCURVE('',#4255,#15520);+#15520 = DEFINITIONAL_REPRESENTATION('',(#15521),#15525);+#15521 = LINE('',#15522,#15523);+#15522 = CARTESIAN_POINT('',(-0.551552353506,-0.750472550933));+#15523 = VECTOR('',#15524,1.);+#15524 = DIRECTION('',(0.,-1.));+#15525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15526 = PCURVE('',#15527,#15532);+#15527 = PLANE('',#15528);+#15528 = AXIS2_PLACEMENT_3D('',#15529,#15530,#15531);+#15529 = CARTESIAN_POINT('',(4.317709717067E-02,2.489734045486,+ 0.193144044696));+#15530 = DIRECTION('',(-1.,0.,0.));+#15531 = DIRECTION('',(0.,-1.,0.));+#15532 = DEFINITIONAL_REPRESENTATION('',(#15533),#15537);+#15533 = LINE('',#15534,#15535);+#15534 = CARTESIAN_POINT('',(2.013750127431,-0.1));+#15535 = VECTOR('',#15536,1.);+#15536 = DIRECTION('',(1.,0.));+#15537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15538 = ORIENTED_EDGE('',*,*,#15539,.T.);+#15539 = EDGE_CURVE('',#15512,#4657,#15540,.T.);+#15540 = SURFACE_CURVE('',#15541,(#15545,#15552),.PCURVE_S1.);+#15541 = LINE('',#15542,#15543);+#15542 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+ 9.314404469578E-02));+#15543 = VECTOR('',#15544,1.);+#15544 = DIRECTION('',(-1.,0.,0.));+#15545 = PCURVE('',#4255,#15546);+#15546 = DEFINITIONAL_REPRESENTATION('',(#15547),#15551);+#15547 = LINE('',#15548,#15549);+#15548 = CARTESIAN_POINT('',(-0.551552353506,-0.830472550935));+#15549 = VECTOR('',#15550,1.);+#15550 = DIRECTION('',(-1.,0.));+#15551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15552 = PCURVE('',#4695,#15553);+#15553 = DEFINITIONAL_REPRESENTATION('',(#15554),#15558);+#15554 = LINE('',#15555,#15556);+#15555 = CARTESIAN_POINT('',(0.118918412304,0.1));+#15556 = VECTOR('',#15557,1.);+#15557 = DIRECTION('',(-1.,0.));+#15558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15559 = ADVANCED_FACE('',(#15560),#5254,.T.);+#15560 = FACE_BOUND('',#15561,.F.);+#15561 = EDGE_LOOP('',(#15562,#15563,#15586,#15607));+#15562 = ORIENTED_EDGE('',*,*,#5238,.F.);+#15563 = ORIENTED_EDGE('',*,*,#15564,.F.);+#15564 = EDGE_CURVE('',#15565,#5211,#15567,.T.);+#15565 = VERTEX_POINT('',#15566);+#15566 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+ 0.193144044696));+#15567 = SURFACE_CURVE('',#15568,(#15572,#15579),.PCURVE_S1.);+#15568 = LINE('',#15569,#15570);+#15569 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+ 0.193144044696));+#15570 = VECTOR('',#15571,1.);+#15571 = DIRECTION('',(-1.,0.,0.));+#15572 = PCURVE('',#5254,#15573);+#15573 = DEFINITIONAL_REPRESENTATION('',(#15574),#15578);+#15574 = LINE('',#15575,#15576);+#15575 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15576 = VECTOR('',#15577,1.);+#15577 = DIRECTION('',(1.,0.));+#15578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15579 = PCURVE('',#5226,#15580);+#15580 = DEFINITIONAL_REPRESENTATION('',(#15581),#15585);+#15581 = LINE('',#15582,#15583);+#15582 = CARTESIAN_POINT('',(-0.644586128841,0.72470739725));+#15583 = VECTOR('',#15584,1.);+#15584 = DIRECTION('',(-1.,0.));+#15585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15586 = ORIENTED_EDGE('',*,*,#15587,.T.);+#15587 = EDGE_CURVE('',#15565,#14950,#15588,.T.);+#15588 = SURFACE_CURVE('',#15589,(#15593,#15600),.PCURVE_S1.);+#15589 = LINE('',#15590,#15591);+#15590 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+ 0.193144044696));+#15591 = VECTOR('',#15592,1.);+#15592 = DIRECTION('',(0.,0.,-1.));+#15593 = PCURVE('',#5254,#15594);+#15594 = DEFINITIONAL_REPRESENTATION('',(#15595),#15599);+#15595 = LINE('',#15596,#15597);+#15596 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15597 = VECTOR('',#15598,1.);+#15598 = DIRECTION('',(0.,1.));+#15599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15600 = PCURVE('',#14988,#15601);+#15601 = DEFINITIONAL_REPRESENTATION('',(#15602),#15606);+#15602 = LINE('',#15603,#15604);+#15603 = CARTESIAN_POINT('',(0.513750127434,0.));+#15604 = VECTOR('',#15605,1.);+#15605 = DIRECTION('',(0.,-1.));+#15606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15607 = ORIENTED_EDGE('',*,*,#14949,.F.);+#15608 = ADVANCED_FACE('',(#15609),#4723,.F.);+#15609 = FACE_BOUND('',#15610,.F.);+#15610 = EDGE_LOOP('',(#15611,#15612,#15635,#15658));+#15611 = ORIENTED_EDGE('',*,*,#4707,.F.);+#15612 = ORIENTED_EDGE('',*,*,#15613,.T.);+#15613 = EDGE_CURVE('',#4680,#15614,#15616,.T.);+#15614 = VERTEX_POINT('',#15615);+#15615 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+ 0.193144044696));+#15616 = SURFACE_CURVE('',#15617,(#15621,#15628),.PCURVE_S1.);+#15617 = LINE('',#15618,#15619);+#15618 = CARTESIAN_POINT('',(0.,0.395983918053,0.193144044696));+#15619 = VECTOR('',#15620,1.);+#15620 = DIRECTION('',(1.,0.,0.));+#15621 = PCURVE('',#4723,#15622);+#15622 = DEFINITIONAL_REPRESENTATION('',(#15623),#15627);+#15623 = LINE('',#15624,#15625);+#15624 = CARTESIAN_POINT('',(-0.687763226012,-0.855292602749));+#15625 = VECTOR('',#15626,1.);+#15626 = DIRECTION('',(1.,0.));+#15627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15628 = PCURVE('',#4695,#15629);+#15629 = DEFINITIONAL_REPRESENTATION('',(#15630),#15634);+#15630 = LINE('',#15631,#15632);+#15631 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#15632 = VECTOR('',#15633,1.);+#15633 = DIRECTION('',(1.,0.));+#15634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15635 = ORIENTED_EDGE('',*,*,#15636,.F.);+#15636 = EDGE_CURVE('',#15637,#15614,#15639,.T.);+#15637 = VERTEX_POINT('',#15638);+#15638 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+ 0.193144044696));+#15639 = SURFACE_CURVE('',#15640,(#15644,#15651),.PCURVE_S1.);+#15640 = LINE('',#15641,#15642);+#15641 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+ 0.193144044696));+#15642 = VECTOR('',#15643,1.);+#15643 = DIRECTION('',(0.,-1.,0.));+#15644 = PCURVE('',#4723,#15645);+#15645 = DEFINITIONAL_REPRESENTATION('',(#15646),#15650);+#15646 = LINE('',#15647,#15648);+#15647 = CARTESIAN_POINT('',(-0.644586128841,-0.775292602747));+#15648 = VECTOR('',#15649,1.);+#15649 = DIRECTION('',(0.,-1.));+#15650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15651 = PCURVE('',#15527,#15652);+#15652 = DEFINITIONAL_REPRESENTATION('',(#15653),#15657);+#15653 = LINE('',#15654,#15655);+#15654 = CARTESIAN_POINT('',(2.013750127431,0.));+#15655 = VECTOR('',#15656,1.);+#15656 = DIRECTION('',(1.,0.));+#15657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15658 = ORIENTED_EDGE('',*,*,#15659,.T.);+#15659 = EDGE_CURVE('',#15637,#4708,#15660,.T.);+#15660 = SURFACE_CURVE('',#15661,(#15665,#15672),.PCURVE_S1.);+#15661 = LINE('',#15662,#15663);+#15662 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+ 0.193144044696));+#15663 = VECTOR('',#15664,1.);+#15664 = DIRECTION('',(-1.,0.,0.));+#15665 = PCURVE('',#4723,#15666);+#15666 = DEFINITIONAL_REPRESENTATION('',(#15667),#15671);+#15667 = LINE('',#15668,#15669);+#15668 = CARTESIAN_POINT('',(-0.644586128841,-0.775292602747));+#15669 = VECTOR('',#15670,1.);+#15670 = DIRECTION('',(-1.,0.));+#15671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15672 = PCURVE('',#4751,#15673);+#15673 = DEFINITIONAL_REPRESENTATION('',(#15674),#15678);+#15674 = LINE('',#15675,#15676);+#15675 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15676 = VECTOR('',#15677,1.);+#15677 = DIRECTION('',(1.,0.));+#15678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15679 = ADVANCED_FACE('',(#15680),#4898,.F.);+#15680 = FACE_BOUND('',#15681,.F.);+#15681 = EDGE_LOOP('',(#15682,#15683,#15706,#15729));+#15682 = ORIENTED_EDGE('',*,*,#4882,.F.);+#15683 = ORIENTED_EDGE('',*,*,#15684,.T.);+#15684 = EDGE_CURVE('',#4855,#15685,#15687,.T.);+#15685 = VERTEX_POINT('',#15686);+#15686 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+ 0.193144044696));+#15687 = SURFACE_CURVE('',#15688,(#15692,#15699),.PCURVE_S1.);+#15688 = LINE('',#15689,#15690);+#15689 = CARTESIAN_POINT('',(0.,0.89598391805,0.193144044696));+#15690 = VECTOR('',#15691,1.);+#15691 = DIRECTION('',(1.,0.,0.));+#15692 = PCURVE('',#4898,#15693);+#15693 = DEFINITIONAL_REPRESENTATION('',(#15694),#15698);+#15694 = LINE('',#15695,#15696);+#15695 = CARTESIAN_POINT('',(-0.687763226012,-0.355292602752));+#15696 = VECTOR('',#15697,1.);+#15697 = DIRECTION('',(1.,0.));+#15698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15699 = PCURVE('',#4870,#15700);+#15700 = DEFINITIONAL_REPRESENTATION('',(#15701),#15705);+#15701 = LINE('',#15702,#15703);+#15702 = CARTESIAN_POINT('',(7.574131513371E-02,0.));+#15703 = VECTOR('',#15704,1.);+#15704 = DIRECTION('',(1.,0.));+#15705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15706 = ORIENTED_EDGE('',*,*,#15707,.F.);+#15707 = EDGE_CURVE('',#15708,#15685,#15710,.T.);+#15708 = VERTEX_POINT('',#15709);+#15709 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+ 0.193144044696));+#15710 = SURFACE_CURVE('',#15711,(#15715,#15722),.PCURVE_S1.);+#15711 = LINE('',#15712,#15713);+#15712 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+ 0.193144044696));+#15713 = VECTOR('',#15714,1.);+#15714 = DIRECTION('',(0.,-1.,0.));+#15715 = PCURVE('',#4898,#15716);+#15716 = DEFINITIONAL_REPRESENTATION('',(#15717),#15721);+#15717 = LINE('',#15718,#15719);+#15718 = CARTESIAN_POINT('',(-0.644586128841,-0.27529260275));+#15719 = VECTOR('',#15720,1.);+#15720 = DIRECTION('',(0.,-1.));+#15721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15722 = PCURVE('',#15340,#15723);+#15723 = DEFINITIONAL_REPRESENTATION('',(#15724),#15728);+#15724 = LINE('',#15725,#15726);+#15725 = CARTESIAN_POINT('',(1.513750127434,0.));+#15726 = VECTOR('',#15727,1.);+#15727 = DIRECTION('',(1.,0.));+#15728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15729 = ORIENTED_EDGE('',*,*,#15730,.T.);+#15730 = EDGE_CURVE('',#15708,#4883,#15731,.T.);+#15731 = SURFACE_CURVE('',#15732,(#15736,#15743),.PCURVE_S1.);+#15732 = LINE('',#15733,#15734);+#15733 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+ 0.193144044696));+#15734 = VECTOR('',#15735,1.);+#15735 = DIRECTION('',(-1.,0.,0.));+#15736 = PCURVE('',#4898,#15737);+#15737 = DEFINITIONAL_REPRESENTATION('',(#15738),#15742);+#15738 = LINE('',#15739,#15740);+#15739 = CARTESIAN_POINT('',(-0.644586128841,-0.27529260275));+#15740 = VECTOR('',#15741,1.);+#15741 = DIRECTION('',(-1.,0.));+#15742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15743 = PCURVE('',#4926,#15744);+#15744 = DEFINITIONAL_REPRESENTATION('',(#15745),#15749);+#15745 = LINE('',#15746,#15747);+#15746 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15747 = VECTOR('',#15748,1.);+#15748 = DIRECTION('',(1.,0.));+#15749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15750 = ADVANCED_FACE('',(#15751),#5073,.F.);+#15751 = FACE_BOUND('',#15752,.F.);+#15752 = EDGE_LOOP('',(#15753,#15754,#15777,#15800));+#15753 = ORIENTED_EDGE('',*,*,#5057,.F.);+#15754 = ORIENTED_EDGE('',*,*,#15755,.F.);+#15755 = EDGE_CURVE('',#15756,#5030,#15758,.T.);+#15756 = VERTEX_POINT('',#15757);+#15757 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+ 0.193144044696));+#15758 = SURFACE_CURVE('',#15759,(#15763,#15770),.PCURVE_S1.);+#15759 = LINE('',#15760,#15761);+#15760 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+ 0.193144044696));+#15761 = VECTOR('',#15762,1.);+#15762 = DIRECTION('',(-1.,0.,0.));+#15763 = PCURVE('',#5073,#15764);+#15764 = DEFINITIONAL_REPRESENTATION('',(#15765),#15769);+#15765 = LINE('',#15766,#15767);+#15766 = CARTESIAN_POINT('',(-0.644586128841,0.14470739725));+#15767 = VECTOR('',#15768,1.);+#15768 = DIRECTION('',(-1.,0.));+#15769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15770 = PCURVE('',#5045,#15771);+#15771 = DEFINITIONAL_REPRESENTATION('',(#15772),#15776);+#15772 = LINE('',#15773,#15774);+#15773 = CARTESIAN_POINT('',(0.118918412304,0.));+#15774 = VECTOR('',#15775,1.);+#15775 = DIRECTION('',(-1.,0.));+#15776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15777 = ORIENTED_EDGE('',*,*,#15778,.F.);+#15778 = EDGE_CURVE('',#15779,#15756,#15781,.T.);+#15779 = VERTEX_POINT('',#15780);+#15780 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+ 0.193144044696));+#15781 = SURFACE_CURVE('',#15782,(#15786,#15793),.PCURVE_S1.);+#15782 = LINE('',#15783,#15784);+#15783 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+ 0.193144044696));+#15784 = VECTOR('',#15785,1.);+#15785 = DIRECTION('',(0.,-1.,0.));+#15786 = PCURVE('',#5073,#15787);+#15787 = DEFINITIONAL_REPRESENTATION('',(#15788),#15792);+#15788 = LINE('',#15789,#15790);+#15789 = CARTESIAN_POINT('',(-0.644586128841,0.224707397248));+#15790 = VECTOR('',#15791,1.);+#15791 = DIRECTION('',(0.,-1.));+#15792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15793 = PCURVE('',#15153,#15794);+#15794 = DEFINITIONAL_REPRESENTATION('',(#15795),#15799);+#15795 = LINE('',#15796,#15797);+#15796 = CARTESIAN_POINT('',(1.013750127436,0.));+#15797 = VECTOR('',#15798,1.);+#15798 = DIRECTION('',(1.,0.));+#15799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15800 = ORIENTED_EDGE('',*,*,#15801,.T.);+#15801 = EDGE_CURVE('',#15779,#5058,#15802,.T.);+#15802 = SURFACE_CURVE('',#15803,(#15807,#15814),.PCURVE_S1.);+#15803 = LINE('',#15804,#15805);+#15804 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+ 0.193144044696));+#15805 = VECTOR('',#15806,1.);+#15806 = DIRECTION('',(-1.,0.,0.));+#15807 = PCURVE('',#5073,#15808);+#15808 = DEFINITIONAL_REPRESENTATION('',(#15809),#15813);+#15809 = LINE('',#15810,#15811);+#15810 = CARTESIAN_POINT('',(-0.644586128841,0.224707397248));+#15811 = VECTOR('',#15812,1.);+#15812 = DIRECTION('',(-1.,0.));+#15813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15814 = PCURVE('',#5101,#15815);+#15815 = DEFINITIONAL_REPRESENTATION('',(#15816),#15820);+#15816 = LINE('',#15817,#15818);+#15817 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#15818 = VECTOR('',#15819,1.);+#15819 = DIRECTION('',(1.,0.));+#15820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15821 = ADVANCED_FACE('',(#15822),#5226,.F.);+#15822 = FACE_BOUND('',#15823,.F.);+#15823 = EDGE_LOOP('',(#15824,#15825,#15848,#15869));+#15824 = ORIENTED_EDGE('',*,*,#5210,.F.);+#15825 = ORIENTED_EDGE('',*,*,#15826,.F.);+#15826 = EDGE_CURVE('',#15827,#5183,#15829,.T.);+#15827 = VERTEX_POINT('',#15828);+#15828 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+ 0.193144044696));+#15829 = SURFACE_CURVE('',#15830,(#15834,#15841),.PCURVE_S1.);+#15830 = LINE('',#15831,#15832);+#15831 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+ 0.193144044696));+#15832 = VECTOR('',#15833,1.);+#15833 = DIRECTION('',(-1.,0.,0.));+#15834 = PCURVE('',#5226,#15835);+#15835 = DEFINITIONAL_REPRESENTATION('',(#15836),#15840);+#15836 = LINE('',#15837,#15838);+#15837 = CARTESIAN_POINT('',(-0.644586128841,0.644707397251));+#15838 = VECTOR('',#15839,1.);+#15839 = DIRECTION('',(-1.,0.));+#15840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15841 = PCURVE('',#5198,#15842);+#15842 = DEFINITIONAL_REPRESENTATION('',(#15843),#15847);+#15843 = LINE('',#15844,#15845);+#15844 = CARTESIAN_POINT('',(0.118918412304,0.));+#15845 = VECTOR('',#15846,1.);+#15846 = DIRECTION('',(-1.,0.));+#15847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15848 = ORIENTED_EDGE('',*,*,#15849,.F.);+#15849 = EDGE_CURVE('',#15565,#15827,#15850,.T.);+#15850 = SURFACE_CURVE('',#15851,(#15855,#15862),.PCURVE_S1.);+#15851 = LINE('',#15852,#15853);+#15852 = CARTESIAN_POINT('',(4.317709717066E-02,1.975983918052,+ 0.193144044696));+#15853 = VECTOR('',#15854,1.);+#15854 = DIRECTION('',(0.,-1.,0.));+#15855 = PCURVE('',#5226,#15856);+#15856 = DEFINITIONAL_REPRESENTATION('',(#15857),#15861);+#15857 = LINE('',#15858,#15859);+#15858 = CARTESIAN_POINT('',(-0.644586128841,0.72470739725));+#15859 = VECTOR('',#15860,1.);+#15860 = DIRECTION('',(0.,-1.));+#15861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15862 = PCURVE('',#14988,#15863);+#15863 = DEFINITIONAL_REPRESENTATION('',(#15864),#15868);+#15864 = LINE('',#15865,#15866);+#15865 = CARTESIAN_POINT('',(0.513750127434,0.));+#15866 = VECTOR('',#15867,1.);+#15867 = DIRECTION('',(1.,0.));+#15868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15869 = ORIENTED_EDGE('',*,*,#15564,.T.);+#15870 = ADVANCED_FACE('',(#15871),#385,.F.);+#15871 = FACE_BOUND('',#15872,.F.);+#15872 = EDGE_LOOP('',(#15873,#15874,#15897,#15925,#15953,#15981,#16009,+ #16037));+#15873 = ORIENTED_EDGE('',*,*,#369,.T.);+#15874 = ORIENTED_EDGE('',*,*,#15875,.F.);+#15875 = EDGE_CURVE('',#15876,#342,#15878,.T.);+#15876 = VERTEX_POINT('',#15877);+#15877 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+ 0.193144044696));+#15878 = SURFACE_CURVE('',#15879,(#15883,#15890),.PCURVE_S1.);+#15879 = LINE('',#15880,#15881);+#15880 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+ 0.193144044696));+#15881 = VECTOR('',#15882,1.);+#15882 = DIRECTION('',(0.,-1.,0.));+#15883 = PCURVE('',#385,#15884);+#15884 = DEFINITIONAL_REPRESENTATION('',(#15885),#15889);+#15885 = LINE('',#15886,#15887);+#15886 = CARTESIAN_POINT('',(0.571698813392,-1.249244113415));+#15887 = VECTOR('',#15888,1.);+#15888 = DIRECTION('',(0.,-1.));+#15889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15890 = PCURVE('',#357,#15891);+#15891 = DEFINITIONAL_REPRESENTATION('',(#15892),#15896);+#15892 = LINE('',#15893,#15894);+#15893 = CARTESIAN_POINT('',(1.633974588913E-02,0.1));+#15894 = VECTOR('',#15895,1.);+#15895 = DIRECTION('',(-1.,0.));+#15896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15897 = ORIENTED_EDGE('',*,*,#15898,.T.);+#15898 = EDGE_CURVE('',#15876,#15899,#15901,.T.);+#15899 = VERTEX_POINT('',#15900);+#15900 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+ 0.193144044696));+#15901 = SURFACE_CURVE('',#15902,(#15906,#15913),.PCURVE_S1.);+#15902 = LINE('',#15903,#15904);+#15903 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+ 0.193144044696));+#15904 = VECTOR('',#15905,1.);+#15905 = DIRECTION('',(0.499999999943,0.866025403818,0.));+#15906 = PCURVE('',#385,#15907);+#15907 = DEFINITIONAL_REPRESENTATION('',(#15908),#15912);+#15908 = LINE('',#15909,#15910);+#15909 = CARTESIAN_POINT('',(0.571698813392,-1.249244113415));+#15910 = VECTOR('',#15911,1.);+#15911 = DIRECTION('',(0.499999999943,0.866025403818));+#15912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15913 = PCURVE('',#15914,#15919);+#15914 = PLANE('',#15915);+#15915 = AXIS2_PLACEMENT_3D('',#15916,#15917,#15918);+#15916 = CARTESIAN_POINT('',(1.259462039404,2.032407387132E-03,+ 9.314404469578E-02));+#15917 = DIRECTION('',(0.866025403818,-0.499999999943,0.));+#15918 = DIRECTION('',(0.499999999943,0.866025403818,0.));+#15919 = DEFINITIONAL_REPRESENTATION('',(#15920),#15924);+#15920 = LINE('',#15921,#15922);+#15921 = CARTESIAN_POINT('',(-8.717956688782E-16,0.1));+#15922 = VECTOR('',#15923,1.);+#15923 = DIRECTION('',(1.,0.));+#15924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15925 = ORIENTED_EDGE('',*,*,#15926,.F.);+#15926 = EDGE_CURVE('',#15927,#15899,#15929,.T.);+#15927 = VERTEX_POINT('',#15928);+#15928 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+ 0.193144044696));+#15929 = SURFACE_CURVE('',#15930,(#15934,#15941),.PCURVE_S1.);+#15930 = LINE('',#15931,#15932);+#15931 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+ 0.193144044696));+#15932 = VECTOR('',#15933,1.);+#15933 = DIRECTION('',(0.,-1.,0.));+#15934 = PCURVE('',#385,#15935);+#15935 = DEFINITIONAL_REPRESENTATION('',(#15936),#15940);+#15936 = LINE('',#15937,#15938);+#15937 = CARTESIAN_POINT('',(0.6116988134,-1.11345563678));+#15938 = VECTOR('',#15939,1.);+#15939 = DIRECTION('',(0.,-1.));+#15940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15941 = PCURVE('',#15942,#15947);+#15942 = PLANE('',#15943);+#15943 = AXIS2_PLACEMENT_3D('',#15944,#15945,#15946);+#15944 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+ 9.314404469578E-02));+#15945 = DIRECTION('',(1.,0.,0.));+#15946 = DIRECTION('',(-0.,1.,0.));+#15947 = DEFINITIONAL_REPRESENTATION('',(#15948),#15952);+#15948 = LINE('',#15949,#15950);+#15949 = CARTESIAN_POINT('',(6.65064443074E-02,0.1));+#15950 = VECTOR('',#15951,1.);+#15951 = DIRECTION('',(-1.,0.));+#15952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15953 = ORIENTED_EDGE('',*,*,#15954,.T.);+#15954 = EDGE_CURVE('',#15927,#15955,#15957,.T.);+#15955 = VERTEX_POINT('',#15956);+#15956 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+ 0.193144044696));+#15957 = SURFACE_CURVE('',#15958,(#15962,#15969),.PCURVE_S1.);+#15958 = LINE('',#15959,#15960);+#15959 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+ 0.193144044696));+#15960 = VECTOR('',#15961,1.);+#15961 = DIRECTION('',(-1.,0.,0.));+#15962 = PCURVE('',#385,#15963);+#15963 = DEFINITIONAL_REPRESENTATION('',(#15964),#15968);+#15964 = LINE('',#15965,#15966);+#15965 = CARTESIAN_POINT('',(0.6116988134,-1.11345563678));+#15966 = VECTOR('',#15967,1.);+#15967 = DIRECTION('',(-1.,0.));+#15968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15969 = PCURVE('',#15970,#15975);+#15970 = PLANE('',#15971);+#15971 = AXIS2_PLACEMENT_3D('',#15972,#15973,#15974);+#15972 = CARTESIAN_POINT('',(4.317709717066E-02,0.137820884022,+ 0.193144044696));+#15973 = DIRECTION('',(0.,-1.,0.));+#15974 = DIRECTION('',(1.,0.,0.));+#15975 = DEFINITIONAL_REPRESENTATION('',(#15976),#15980);+#15976 = LINE('',#15977,#15978);+#15977 = CARTESIAN_POINT('',(1.256284942241,0.));+#15978 = VECTOR('',#15979,1.);+#15979 = DIRECTION('',(-1.,0.));+#15980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15981 = ORIENTED_EDGE('',*,*,#15982,.F.);+#15982 = EDGE_CURVE('',#15983,#15955,#15985,.T.);+#15983 = VERTEX_POINT('',#15984);+#15984 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+ 0.193144044696));+#15985 = SURFACE_CURVE('',#15986,(#15990,#15997),.PCURVE_S1.);+#15986 = LINE('',#15987,#15988);+#15987 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+ 0.193144044696));+#15988 = VECTOR('',#15989,1.);+#15989 = DIRECTION('',(0.,1.,0.));+#15990 = PCURVE('',#385,#15991);+#15991 = DEFINITIONAL_REPRESENTATION('',(#15992),#15996);+#15992 = LINE('',#15993,#15994);+#15993 = CARTESIAN_POINT('',(0.336698813399,-1.179962081033));+#15994 = VECTOR('',#15995,1.);+#15995 = DIRECTION('',(0.,1.));+#15996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15997 = PCURVE('',#15998,#16003);+#15998 = PLANE('',#15999);+#15999 = AXIS2_PLACEMENT_3D('',#16000,#16001,#16002);+#16000 = CARTESIAN_POINT('',(1.024462039411,0.160692661543,+ 9.314404469578E-02));+#16001 = DIRECTION('',(-1.,0.,0.));+#16002 = DIRECTION('',(0.,-1.,0.));+#16003 = DEFINITIONAL_REPRESENTATION('',(#16004),#16008);+#16004 = LINE('',#16005,#16006);+#16005 = CARTESIAN_POINT('',(8.937822177383E-02,0.1));+#16006 = VECTOR('',#16007,1.);+#16007 = DIRECTION('',(-1.,0.));+#16008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16009 = ORIENTED_EDGE('',*,*,#16010,.T.);+#16010 = EDGE_CURVE('',#15983,#16011,#16013,.T.);+#16011 = VERTEX_POINT('',#16012);+#16012 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+ 0.193144044696));+#16013 = SURFACE_CURVE('',#16014,(#16018,#16025),.PCURVE_S1.);+#16014 = LINE('',#16015,#16016);+#16015 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+ 0.193144044696));+#16016 = VECTOR('',#16017,1.);+#16017 = DIRECTION('',(0.500000000069,-0.866025403744,0.));+#16018 = PCURVE('',#385,#16019);+#16019 = DEFINITIONAL_REPRESENTATION('',(#16020),#16024);+#16020 = LINE('',#16021,#16022);+#16021 = CARTESIAN_POINT('',(0.336698813399,-1.179962081033));+#16022 = VECTOR('',#16023,1.);+#16023 = DIRECTION('',(0.500000000069,-0.866025403744));+#16024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16025 = PCURVE('',#16026,#16031);+#16026 = PLANE('',#16027);+#16027 = AXIS2_PLACEMENT_3D('',#16028,#16029,#16030);+#16028 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+ 9.314404469578E-02));+#16029 = DIRECTION('',(-0.866025403744,-0.500000000069,0.));+#16030 = DIRECTION('',(0.500000000069,-0.866025403744,0.));+#16031 = DEFINITIONAL_REPRESENTATION('',(#16032),#16036);+#16032 = LINE('',#16033,#16034);+#16033 = CARTESIAN_POINT('',(0.,0.1));+#16034 = VECTOR('',#16035,1.);+#16035 = DIRECTION('',(1.,0.));+#16036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16037 = ORIENTED_EDGE('',*,*,#16038,.F.);+#16038 = EDGE_CURVE('',#370,#16011,#16039,.T.);+#16039 = SURFACE_CURVE('',#16040,(#16044,#16051),.PCURVE_S1.);+#16040 = LINE('',#16041,#16042);+#16041 = CARTESIAN_POINT('',(1.059462039418,0.,0.193144044696));+#16042 = VECTOR('',#16043,1.);+#16043 = DIRECTION('',(0.,1.,0.));+#16044 = PCURVE('',#385,#16045);+#16045 = DEFINITIONAL_REPRESENTATION('',(#16046),#16050);+#16046 = LINE('',#16047,#16048);+#16047 = CARTESIAN_POINT('',(0.371698813406,-1.251276520802));+#16048 = VECTOR('',#16049,1.);+#16049 = DIRECTION('',(0.,1.));+#16050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16051 = PCURVE('',#411,#16052);+#16052 = DEFINITIONAL_REPRESENTATION('',(#16053),#16057);+#16053 = LINE('',#16054,#16055);+#16054 = CARTESIAN_POINT('',(1.06926615031E-02,0.1));+#16055 = VECTOR('',#16056,1.);+#16056 = DIRECTION('',(-1.,0.));+#16057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16058 = ADVANCED_FACE('',(#16059),#4695,.T.);+#16059 = FACE_BOUND('',#16060,.F.);+#16060 = EDGE_LOOP('',(#16061,#16062,#16063,#16084));+#16061 = ORIENTED_EDGE('',*,*,#4679,.T.);+#16062 = ORIENTED_EDGE('',*,*,#15539,.F.);+#16063 = ORIENTED_EDGE('',*,*,#16064,.F.);+#16064 = EDGE_CURVE('',#15614,#15512,#16065,.T.);+#16065 = SURFACE_CURVE('',#16066,(#16070,#16077),.PCURVE_S1.);+#16066 = LINE('',#16067,#16068);+#16067 = CARTESIAN_POINT('',(4.317709717066E-02,0.395983918053,+ 0.193144044696));+#16068 = VECTOR('',#16069,1.);+#16069 = DIRECTION('',(0.,0.,-1.));+#16070 = PCURVE('',#4695,#16071);+#16071 = DEFINITIONAL_REPRESENTATION('',(#16072),#16076);+#16072 = LINE('',#16073,#16074);+#16073 = CARTESIAN_POINT('',(0.118918412304,0.));+#16074 = VECTOR('',#16075,1.);+#16075 = DIRECTION('',(0.,1.));+#16076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16077 = PCURVE('',#15527,#16078);+#16078 = DEFINITIONAL_REPRESENTATION('',(#16079),#16083);+#16079 = LINE('',#16080,#16081);+#16080 = CARTESIAN_POINT('',(2.093750127433,0.));+#16081 = VECTOR('',#16082,1.);+#16082 = DIRECTION('',(0.,-1.));+#16083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16084 = ORIENTED_EDGE('',*,*,#15613,.F.);+#16085 = ADVANCED_FACE('',(#16086),#15527,.T.);+#16086 = FACE_BOUND('',#16087,.F.);+#16087 = EDGE_LOOP('',(#16088,#16089,#16090,#16111));+#16088 = ORIENTED_EDGE('',*,*,#16064,.T.);+#16089 = ORIENTED_EDGE('',*,*,#15511,.F.);+#16090 = ORIENTED_EDGE('',*,*,#16091,.F.);+#16091 = EDGE_CURVE('',#15637,#15489,#16092,.T.);+#16092 = SURFACE_CURVE('',#16093,(#16097,#16104),.PCURVE_S1.);+#16093 = LINE('',#16094,#16095);+#16094 = CARTESIAN_POINT('',(4.317709717066E-02,0.475983918055,+ 0.193144044696));+#16095 = VECTOR('',#16096,1.);+#16096 = DIRECTION('',(0.,0.,-1.));+#16097 = PCURVE('',#15527,#16098);+#16098 = DEFINITIONAL_REPRESENTATION('',(#16099),#16103);+#16099 = LINE('',#16100,#16101);+#16100 = CARTESIAN_POINT('',(2.013750127431,0.));+#16101 = VECTOR('',#16102,1.);+#16102 = DIRECTION('',(0.,-1.));+#16103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16104 = PCURVE('',#4751,#16105);+#16105 = DEFINITIONAL_REPRESENTATION('',(#16106),#16110);+#16106 = LINE('',#16107,#16108);+#16107 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#16108 = VECTOR('',#16109,1.);+#16109 = DIRECTION('',(0.,1.));+#16110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16111 = ORIENTED_EDGE('',*,*,#15636,.T.);+#16112 = ADVANCED_FACE('',(#16113),#15153,.T.);+#16113 = FACE_BOUND('',#16114,.F.);+#16114 = EDGE_LOOP('',(#16115,#16136,#16137,#16158));+#16115 = ORIENTED_EDGE('',*,*,#16116,.T.);+#16116 = EDGE_CURVE('',#15756,#15138,#16117,.T.);+#16117 = SURFACE_CURVE('',#16118,(#16122,#16129),.PCURVE_S1.);+#16118 = LINE('',#16119,#16120);+#16119 = CARTESIAN_POINT('',(4.317709717066E-02,1.395983918052,+ 0.193144044696));+#16120 = VECTOR('',#16121,1.);+#16121 = DIRECTION('',(0.,0.,-1.));+#16122 = PCURVE('',#15153,#16123);+#16123 = DEFINITIONAL_REPRESENTATION('',(#16124),#16128);+#16124 = LINE('',#16125,#16126);+#16125 = CARTESIAN_POINT('',(1.093750127434,0.));+#16126 = VECTOR('',#16127,1.);+#16127 = DIRECTION('',(0.,-1.));+#16128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16129 = PCURVE('',#5045,#16130);+#16130 = DEFINITIONAL_REPRESENTATION('',(#16131),#16135);+#16131 = LINE('',#16132,#16133);+#16132 = CARTESIAN_POINT('',(0.118918412304,0.));+#16133 = VECTOR('',#16134,1.);+#16134 = DIRECTION('',(0.,1.));+#16135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16136 = ORIENTED_EDGE('',*,*,#15137,.F.);+#16137 = ORIENTED_EDGE('',*,*,#16138,.F.);+#16138 = EDGE_CURVE('',#15779,#15115,#16139,.T.);+#16139 = SURFACE_CURVE('',#16140,(#16144,#16151),.PCURVE_S1.);+#16140 = LINE('',#16141,#16142);+#16141 = CARTESIAN_POINT('',(4.317709717066E-02,1.47598391805,+ 0.193144044696));+#16142 = VECTOR('',#16143,1.);+#16143 = DIRECTION('',(0.,0.,-1.));+#16144 = PCURVE('',#15153,#16145);+#16145 = DEFINITIONAL_REPRESENTATION('',(#16146),#16150);+#16146 = LINE('',#16147,#16148);+#16147 = CARTESIAN_POINT('',(1.013750127436,0.));+#16148 = VECTOR('',#16149,1.);+#16149 = DIRECTION('',(0.,-1.));+#16150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16151 = PCURVE('',#5101,#16152);+#16152 = DEFINITIONAL_REPRESENTATION('',(#16153),#16157);+#16153 = LINE('',#16154,#16155);+#16154 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#16155 = VECTOR('',#16156,1.);+#16156 = DIRECTION('',(0.,1.));+#16157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16158 = ORIENTED_EDGE('',*,*,#15778,.T.);+#16159 = ADVANCED_FACE('',(#16160),#14988,.T.);+#16160 = FACE_BOUND('',#16161,.F.);+#16161 = EDGE_LOOP('',(#16162,#16163,#16164,#16185));+#16162 = ORIENTED_EDGE('',*,*,#15587,.F.);+#16163 = ORIENTED_EDGE('',*,*,#15849,.T.);+#16164 = ORIENTED_EDGE('',*,*,#16165,.T.);+#16165 = EDGE_CURVE('',#15827,#14973,#16166,.T.);+#16166 = SURFACE_CURVE('',#16167,(#16171,#16178),.PCURVE_S1.);+#16167 = LINE('',#16168,#16169);+#16168 = CARTESIAN_POINT('',(4.317709717066E-02,1.895983918053,+ 0.193144044696));+#16169 = VECTOR('',#16170,1.);+#16170 = DIRECTION('',(0.,0.,-1.));+#16171 = PCURVE('',#14988,#16172);+#16172 = DEFINITIONAL_REPRESENTATION('',(#16173),#16177);+#16173 = LINE('',#16174,#16175);+#16174 = CARTESIAN_POINT('',(0.593750127433,0.));+#16175 = VECTOR('',#16176,1.);+#16176 = DIRECTION('',(0.,-1.));+#16177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16178 = PCURVE('',#5198,#16179);+#16179 = DEFINITIONAL_REPRESENTATION('',(#16180),#16184);+#16180 = LINE('',#16181,#16182);+#16181 = CARTESIAN_POINT('',(0.118918412304,0.));+#16182 = VECTOR('',#16183,1.);+#16183 = DIRECTION('',(0.,1.));+#16184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16185 = ORIENTED_EDGE('',*,*,#14972,.F.);+#16186 = ADVANCED_FACE('',(#16187),#15340,.T.);+#16187 = FACE_BOUND('',#16188,.F.);+#16188 = EDGE_LOOP('',(#16189,#16210,#16211,#16232));+#16189 = ORIENTED_EDGE('',*,*,#16190,.F.);+#16190 = EDGE_CURVE('',#15708,#15302,#16191,.T.);+#16191 = SURFACE_CURVE('',#16192,(#16196,#16203),.PCURVE_S1.);+#16192 = LINE('',#16193,#16194);+#16193 = CARTESIAN_POINT('',(4.317709717066E-02,0.975983918052,+ 0.193144044696));+#16194 = VECTOR('',#16195,1.);+#16195 = DIRECTION('',(0.,0.,-1.));+#16196 = PCURVE('',#15340,#16197);+#16197 = DEFINITIONAL_REPRESENTATION('',(#16198),#16202);+#16198 = LINE('',#16199,#16200);+#16199 = CARTESIAN_POINT('',(1.513750127434,0.));+#16200 = VECTOR('',#16201,1.);+#16201 = DIRECTION('',(0.,-1.));+#16202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16203 = PCURVE('',#4926,#16204);+#16204 = DEFINITIONAL_REPRESENTATION('',(#16205),#16209);+#16205 = LINE('',#16206,#16207);+#16206 = CARTESIAN_POINT('',(1.608158770494E-02,0.));+#16207 = VECTOR('',#16208,1.);+#16208 = DIRECTION('',(0.,1.));+#16209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16210 = ORIENTED_EDGE('',*,*,#15707,.T.);+#16211 = ORIENTED_EDGE('',*,*,#16212,.T.);+#16212 = EDGE_CURVE('',#15685,#15325,#16213,.T.);+#16213 = SURFACE_CURVE('',#16214,(#16218,#16225),.PCURVE_S1.);+#16214 = LINE('',#16215,#16216);+#16215 = CARTESIAN_POINT('',(4.317709717066E-02,0.89598391805,+ 0.193144044696));+#16216 = VECTOR('',#16217,1.);+#16217 = DIRECTION('',(0.,0.,-1.));+#16218 = PCURVE('',#15340,#16219);+#16219 = DEFINITIONAL_REPRESENTATION('',(#16220),#16224);+#16220 = LINE('',#16221,#16222);+#16221 = CARTESIAN_POINT('',(1.593750127436,0.));+#16222 = VECTOR('',#16223,1.);+#16223 = DIRECTION('',(0.,-1.));+#16224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16225 = PCURVE('',#4870,#16226);+#16226 = DEFINITIONAL_REPRESENTATION('',(#16227),#16231);+#16227 = LINE('',#16228,#16229);+#16228 = CARTESIAN_POINT('',(0.118918412304,0.));+#16229 = VECTOR('',#16230,1.);+#16230 = DIRECTION('',(0.,1.));+#16231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16232 = ORIENTED_EDGE('',*,*,#15324,.F.);+#16233 = ADVANCED_FACE('',(#16234),#4751,.T.);+#16234 = FACE_BOUND('',#16235,.F.);+#16235 = EDGE_LOOP('',(#16236,#16237,#16238,#16239));+#16236 = ORIENTED_EDGE('',*,*,#4735,.F.);+#16237 = ORIENTED_EDGE('',*,*,#15659,.F.);+#16238 = ORIENTED_EDGE('',*,*,#16091,.T.);+#16239 = ORIENTED_EDGE('',*,*,#15488,.T.);+#16240 = ADVANCED_FACE('',(#16241),#5045,.T.);+#16241 = FACE_BOUND('',#16242,.F.);+#16242 = EDGE_LOOP('',(#16243,#16244,#16245,#16246));+#16243 = ORIENTED_EDGE('',*,*,#5029,.T.);+#16244 = ORIENTED_EDGE('',*,*,#15165,.F.);+#16245 = ORIENTED_EDGE('',*,*,#16116,.F.);+#16246 = ORIENTED_EDGE('',*,*,#15755,.T.);+#16247 = ADVANCED_FACE('',(#16248),#5101,.T.);+#16248 = FACE_BOUND('',#16249,.F.);+#16249 = EDGE_LOOP('',(#16250,#16251,#16252,#16253));+#16250 = ORIENTED_EDGE('',*,*,#5085,.F.);+#16251 = ORIENTED_EDGE('',*,*,#15801,.F.);+#16252 = ORIENTED_EDGE('',*,*,#16138,.T.);+#16253 = ORIENTED_EDGE('',*,*,#15114,.F.);+#16254 = ADVANCED_FACE('',(#16255),#5198,.T.);+#16255 = FACE_BOUND('',#16256,.F.);+#16256 = EDGE_LOOP('',(#16257,#16258,#16259,#16260));+#16257 = ORIENTED_EDGE('',*,*,#5182,.T.);+#16258 = ORIENTED_EDGE('',*,*,#15000,.F.);+#16259 = ORIENTED_EDGE('',*,*,#16165,.F.);+#16260 = ORIENTED_EDGE('',*,*,#15826,.T.);+#16261 = ADVANCED_FACE('',(#16262),#4926,.T.);+#16262 = FACE_BOUND('',#16263,.F.);+#16263 = EDGE_LOOP('',(#16264,#16265,#16266,#16267));+#16264 = ORIENTED_EDGE('',*,*,#4910,.F.);+#16265 = ORIENTED_EDGE('',*,*,#15730,.F.);+#16266 = ORIENTED_EDGE('',*,*,#16190,.T.);+#16267 = ORIENTED_EDGE('',*,*,#15301,.F.);+#16268 = ADVANCED_FACE('',(#16269),#4870,.T.);+#16269 = FACE_BOUND('',#16270,.F.);+#16270 = EDGE_LOOP('',(#16271,#16272,#16273,#16274));+#16271 = ORIENTED_EDGE('',*,*,#4854,.T.);+#16272 = ORIENTED_EDGE('',*,*,#15352,.F.);+#16273 = ORIENTED_EDGE('',*,*,#16212,.F.);+#16274 = ORIENTED_EDGE('',*,*,#15684,.F.);+#16275 = ADVANCED_FACE('',(#16276),#357,.F.);+#16276 = FACE_BOUND('',#16277,.F.);+#16277 = EDGE_LOOP('',(#16278,#16279,#16302,#16323));+#16278 = ORIENTED_EDGE('',*,*,#341,.F.);+#16279 = ORIENTED_EDGE('',*,*,#16280,.T.);+#16280 = EDGE_CURVE('',#314,#16281,#16283,.T.);+#16281 = VERTEX_POINT('',#16282);+#16282 = CARTESIAN_POINT('',(1.259462039404,2.032407387132E-03,+ 9.314404469578E-02));+#16283 = SURFACE_CURVE('',#16284,(#16288,#16295),.PCURVE_S1.);+#16284 = LINE('',#16285,#16286);+#16285 = CARTESIAN_POINT('',(1.259462039404,0.,9.314404469578E-02));+#16286 = VECTOR('',#16287,1.);+#16287 = DIRECTION('',(0.,1.,0.));+#16288 = PCURVE('',#357,#16289);+#16289 = DEFINITIONAL_REPRESENTATION('',(#16290),#16294);+#16290 = LINE('',#16291,#16292);+#16291 = CARTESIAN_POINT('',(1.4307338502E-02,0.));+#16292 = VECTOR('',#16293,1.);+#16293 = DIRECTION('',(1.,0.));+#16294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16295 = PCURVE('',#329,#16296);+#16296 = DEFINITIONAL_REPRESENTATION('',(#16297),#16301);+#16297 = LINE('',#16298,#16299);+#16298 = CARTESIAN_POINT('',(0.571698813392,-1.251276520802));+#16299 = VECTOR('',#16300,1.);+#16300 = DIRECTION('',(0.,1.));+#16301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16302 = ORIENTED_EDGE('',*,*,#16303,.F.);+#16303 = EDGE_CURVE('',#15876,#16281,#16304,.T.);+#16304 = SURFACE_CURVE('',#16305,(#16309,#16316),.PCURVE_S1.);+#16305 = LINE('',#16306,#16307);+#16306 = CARTESIAN_POINT('',(1.259462039404,2.032407387131E-03,+ 0.193144044696));+#16307 = VECTOR('',#16308,1.);+#16308 = DIRECTION('',(0.,0.,-1.));+#16309 = PCURVE('',#357,#16310);+#16310 = DEFINITIONAL_REPRESENTATION('',(#16311),#16315);+#16311 = LINE('',#16312,#16313);+#16312 = CARTESIAN_POINT('',(1.633974588913E-02,0.1));+#16313 = VECTOR('',#16314,1.);+#16314 = DIRECTION('',(0.,-1.));+#16315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16316 = PCURVE('',#15914,#16317);+#16317 = DEFINITIONAL_REPRESENTATION('',(#16318),#16322);+#16318 = LINE('',#16319,#16320);+#16319 = CARTESIAN_POINT('',(-8.717956688782E-16,0.1));+#16320 = VECTOR('',#16321,1.);+#16321 = DIRECTION('',(0.,-1.));+#16322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16323 = ORIENTED_EDGE('',*,*,#15875,.T.);+#16324 = ADVANCED_FACE('',(#16325),#329,.T.);+#16325 = FACE_BOUND('',#16326,.F.);+#16326 = EDGE_LOOP('',(#16327,#16328,#16351,#16374,#16397,#16420,#16443,+ #16464));+#16327 = ORIENTED_EDGE('',*,*,#311,.F.);+#16328 = ORIENTED_EDGE('',*,*,#16329,.F.);+#16329 = EDGE_CURVE('',#16330,#312,#16332,.T.);+#16330 = VERTEX_POINT('',#16331);+#16331 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+ 9.314404469578E-02));+#16332 = SURFACE_CURVE('',#16333,(#16337,#16344),.PCURVE_S1.);+#16333 = LINE('',#16334,#16335);+#16334 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+ 9.314404469578E-02));+#16335 = VECTOR('',#16336,1.);+#16336 = DIRECTION('',(0.,-1.,0.));+#16337 = PCURVE('',#329,#16338);+#16338 = DEFINITIONAL_REPRESENTATION('',(#16339),#16343);+#16339 = LINE('',#16340,#16341);+#16340 = CARTESIAN_POINT('',(0.371698813406,-1.240583859299));+#16341 = VECTOR('',#16342,1.);+#16342 = DIRECTION('',(0.,-1.));+#16343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16344 = PCURVE('',#411,#16345);+#16345 = DEFINITIONAL_REPRESENTATION('',(#16346),#16350);+#16346 = LINE('',#16347,#16348);+#16347 = CARTESIAN_POINT('',(0.,0.));+#16348 = VECTOR('',#16349,1.);+#16349 = DIRECTION('',(1.,0.));+#16350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16351 = ORIENTED_EDGE('',*,*,#16352,.T.);+#16352 = EDGE_CURVE('',#16330,#16353,#16355,.T.);+#16353 = VERTEX_POINT('',#16354);+#16354 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+ 9.314404469578E-02));+#16355 = SURFACE_CURVE('',#16356,(#16360,#16367),.PCURVE_S1.);+#16356 = LINE('',#16357,#16358);+#16357 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+ 9.314404469578E-02));+#16358 = VECTOR('',#16359,1.);+#16359 = DIRECTION('',(-0.500000000069,0.866025403744,0.));+#16360 = PCURVE('',#329,#16361);+#16361 = DEFINITIONAL_REPRESENTATION('',(#16362),#16366);+#16362 = LINE('',#16363,#16364);+#16363 = CARTESIAN_POINT('',(0.371698813406,-1.240583859299));+#16364 = VECTOR('',#16365,1.);+#16365 = DIRECTION('',(-0.500000000069,0.866025403744));+#16366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16367 = PCURVE('',#16026,#16368);+#16368 = DEFINITIONAL_REPRESENTATION('',(#16369),#16373);+#16369 = LINE('',#16370,#16371);+#16370 = CARTESIAN_POINT('',(7.00000000045E-02,0.));+#16371 = VECTOR('',#16372,1.);+#16372 = DIRECTION('',(-1.,0.));+#16373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16374 = ORIENTED_EDGE('',*,*,#16375,.F.);+#16375 = EDGE_CURVE('',#16376,#16353,#16378,.T.);+#16376 = VERTEX_POINT('',#16377);+#16377 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+ 9.314404469578E-02));+#16378 = SURFACE_CURVE('',#16379,(#16383,#16390),.PCURVE_S1.);+#16379 = LINE('',#16380,#16381);+#16380 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+ 9.314404469578E-02));+#16381 = VECTOR('',#16382,1.);+#16382 = DIRECTION('',(0.,-1.,0.));+#16383 = PCURVE('',#329,#16384);+#16384 = DEFINITIONAL_REPRESENTATION('',(#16385),#16389);+#16385 = LINE('',#16386,#16387);+#16386 = CARTESIAN_POINT('',(0.336698813399,-1.11345563678));+#16387 = VECTOR('',#16388,1.);+#16388 = DIRECTION('',(0.,-1.));+#16389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16390 = PCURVE('',#15998,#16391);+#16391 = DEFINITIONAL_REPRESENTATION('',(#16392),#16396);+#16392 = LINE('',#16393,#16394);+#16393 = CARTESIAN_POINT('',(2.2871777521E-02,0.));+#16394 = VECTOR('',#16395,1.);+#16395 = DIRECTION('',(1.,0.));+#16396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16397 = ORIENTED_EDGE('',*,*,#16398,.T.);+#16398 = EDGE_CURVE('',#16376,#16399,#16401,.T.);+#16399 = VERTEX_POINT('',#16400);+#16400 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+ 9.314404469578E-02));+#16401 = SURFACE_CURVE('',#16402,(#16406,#16413),.PCURVE_S1.);+#16402 = LINE('',#16403,#16404);+#16403 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+ 9.314404469578E-02));+#16404 = VECTOR('',#16405,1.);+#16405 = DIRECTION('',(1.,0.,0.));+#16406 = PCURVE('',#329,#16407);+#16407 = DEFINITIONAL_REPRESENTATION('',(#16408),#16412);+#16408 = LINE('',#16409,#16410);+#16409 = CARTESIAN_POINT('',(0.336698813399,-1.11345563678));+#16410 = VECTOR('',#16411,1.);+#16411 = DIRECTION('',(1.,0.));+#16412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16413 = PCURVE('',#15970,#16414);+#16414 = DEFINITIONAL_REPRESENTATION('',(#16415),#16419);+#16415 = LINE('',#16416,#16417);+#16416 = CARTESIAN_POINT('',(0.98128494224,-0.1));+#16417 = VECTOR('',#16418,1.);+#16418 = DIRECTION('',(1.,0.));+#16419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16420 = ORIENTED_EDGE('',*,*,#16421,.F.);+#16421 = EDGE_CURVE('',#16422,#16399,#16424,.T.);+#16422 = VERTEX_POINT('',#16423);+#16423 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+ 9.314404469578E-02));+#16424 = SURFACE_CURVE('',#16425,(#16429,#16436),.PCURVE_S1.);+#16425 = LINE('',#16426,#16427);+#16426 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+ 9.314404469578E-02));+#16427 = VECTOR('',#16428,1.);+#16428 = DIRECTION('',(0.,1.,0.));+#16429 = PCURVE('',#329,#16430);+#16430 = DEFINITIONAL_REPRESENTATION('',(#16431),#16435);+#16431 = LINE('',#16432,#16433);+#16432 = CARTESIAN_POINT('',(0.6116988134,-1.179962081087));+#16433 = VECTOR('',#16434,1.);+#16434 = DIRECTION('',(0.,1.));+#16435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16436 = PCURVE('',#15942,#16437);+#16437 = DEFINITIONAL_REPRESENTATION('',(#16438),#16442);+#16438 = LINE('',#16439,#16440);+#16439 = CARTESIAN_POINT('',(0.,0.));+#16440 = VECTOR('',#16441,1.);+#16441 = DIRECTION('',(1.,0.));+#16442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16443 = ORIENTED_EDGE('',*,*,#16444,.T.);+#16444 = EDGE_CURVE('',#16422,#16281,#16445,.T.);+#16445 = SURFACE_CURVE('',#16446,(#16450,#16457),.PCURVE_S1.);+#16446 = LINE('',#16447,#16448);+#16447 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+ 9.314404469578E-02));+#16448 = VECTOR('',#16449,1.);+#16449 = DIRECTION('',(-0.499999999943,-0.866025403818,0.));+#16450 = PCURVE('',#329,#16451);+#16451 = DEFINITIONAL_REPRESENTATION('',(#16452),#16456);+#16452 = LINE('',#16453,#16454);+#16453 = CARTESIAN_POINT('',(0.6116988134,-1.179962081087));+#16454 = VECTOR('',#16455,1.);+#16455 = DIRECTION('',(-0.499999999943,-0.866025403818));+#16456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16457 = PCURVE('',#15914,#16458);+#16458 = DEFINITIONAL_REPRESENTATION('',(#16459),#16463);+#16459 = LINE('',#16460,#16461);+#16460 = CARTESIAN_POINT('',(8.00000000254E-02,0.));+#16461 = VECTOR('',#16462,1.);+#16462 = DIRECTION('',(-1.,0.));+#16463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16464 = ORIENTED_EDGE('',*,*,#16280,.F.);+#16465 = ADVANCED_FACE('',(#16466),#411,.F.);+#16466 = FACE_BOUND('',#16467,.F.);+#16467 = EDGE_LOOP('',(#16468,#16469,#16470,#16491));+#16468 = ORIENTED_EDGE('',*,*,#397,.T.);+#16469 = ORIENTED_EDGE('',*,*,#16038,.T.);+#16470 = ORIENTED_EDGE('',*,*,#16471,.T.);+#16471 = EDGE_CURVE('',#16011,#16330,#16472,.T.);+#16472 = SURFACE_CURVE('',#16473,(#16477,#16484),.PCURVE_S1.);+#16473 = LINE('',#16474,#16475);+#16474 = CARTESIAN_POINT('',(1.059462039418,1.06926615031E-02,+ 0.193144044696));+#16475 = VECTOR('',#16476,1.);+#16476 = DIRECTION('',(0.,0.,-1.));+#16477 = PCURVE('',#411,#16478);+#16478 = DEFINITIONAL_REPRESENTATION('',(#16479),#16483);+#16479 = LINE('',#16480,#16481);+#16480 = CARTESIAN_POINT('',(0.,0.1));+#16481 = VECTOR('',#16482,1.);+#16482 = DIRECTION('',(0.,-1.));+#16483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16484 = PCURVE('',#16026,#16485);+#16485 = DEFINITIONAL_REPRESENTATION('',(#16486),#16490);+#16486 = LINE('',#16487,#16488);+#16487 = CARTESIAN_POINT('',(7.00000000045E-02,0.1));+#16488 = VECTOR('',#16489,1.);+#16489 = DIRECTION('',(0.,-1.));+#16490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16491 = ORIENTED_EDGE('',*,*,#16329,.T.);+#16492 = ADVANCED_FACE('',(#16493),#16026,.F.);+#16493 = FACE_BOUND('',#16494,.F.);+#16494 = EDGE_LOOP('',(#16495,#16496,#16497,#16498));+#16495 = ORIENTED_EDGE('',*,*,#16352,.F.);+#16496 = ORIENTED_EDGE('',*,*,#16471,.F.);+#16497 = ORIENTED_EDGE('',*,*,#16010,.F.);+#16498 = ORIENTED_EDGE('',*,*,#16499,.T.);+#16499 = EDGE_CURVE('',#15983,#16353,#16500,.T.);+#16500 = SURFACE_CURVE('',#16501,(#16505,#16512),.PCURVE_S1.);+#16501 = LINE('',#16502,#16503);+#16502 = CARTESIAN_POINT('',(1.024462039411,7.131443976917E-02,+ 0.193144044696));+#16503 = VECTOR('',#16504,1.);+#16504 = DIRECTION('',(0.,0.,-1.));+#16505 = PCURVE('',#16026,#16506);+#16506 = DEFINITIONAL_REPRESENTATION('',(#16507),#16511);+#16507 = LINE('',#16508,#16509);+#16508 = CARTESIAN_POINT('',(0.,0.1));+#16509 = VECTOR('',#16510,1.);+#16510 = DIRECTION('',(0.,-1.));+#16511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16512 = PCURVE('',#15998,#16513);+#16513 = DEFINITIONAL_REPRESENTATION('',(#16514),#16518);+#16514 = LINE('',#16515,#16516);+#16515 = CARTESIAN_POINT('',(8.937822177383E-02,0.1));+#16516 = VECTOR('',#16517,1.);+#16517 = DIRECTION('',(0.,-1.));+#16518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16519 = ADVANCED_FACE('',(#16520),#15998,.F.);+#16520 = FACE_BOUND('',#16521,.F.);+#16521 = EDGE_LOOP('',(#16522,#16543,#16544,#16545));+#16522 = ORIENTED_EDGE('',*,*,#16523,.F.);+#16523 = EDGE_CURVE('',#16376,#15955,#16524,.T.);+#16524 = SURFACE_CURVE('',#16525,(#16529,#16536),.PCURVE_S1.);+#16525 = LINE('',#16526,#16527);+#16526 = CARTESIAN_POINT('',(1.024462039411,0.137820884022,+ 9.314404469578E-02));+#16527 = VECTOR('',#16528,1.);+#16528 = DIRECTION('',(0.,0.,1.));+#16529 = PCURVE('',#15998,#16530);+#16530 = DEFINITIONAL_REPRESENTATION('',(#16531),#16535);+#16531 = LINE('',#16532,#16533);+#16532 = CARTESIAN_POINT('',(2.2871777521E-02,0.));+#16533 = VECTOR('',#16534,1.);+#16534 = DIRECTION('',(0.,1.));+#16535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16536 = PCURVE('',#15970,#16537);+#16537 = DEFINITIONAL_REPRESENTATION('',(#16538),#16542);+#16538 = LINE('',#16539,#16540);+#16539 = CARTESIAN_POINT('',(0.98128494224,-0.1));+#16540 = VECTOR('',#16541,1.);+#16541 = DIRECTION('',(0.,1.));+#16542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16543 = ORIENTED_EDGE('',*,*,#16375,.T.);+#16544 = ORIENTED_EDGE('',*,*,#16499,.F.);+#16545 = ORIENTED_EDGE('',*,*,#15982,.T.);+#16546 = ADVANCED_FACE('',(#16547),#15970,.T.);+#16547 = FACE_BOUND('',#16548,.F.);+#16548 = EDGE_LOOP('',(#16549,#16550,#16551,#16552));+#16549 = ORIENTED_EDGE('',*,*,#16398,.F.);+#16550 = ORIENTED_EDGE('',*,*,#16523,.T.);+#16551 = ORIENTED_EDGE('',*,*,#15954,.F.);+#16552 = ORIENTED_EDGE('',*,*,#16553,.F.);+#16553 = EDGE_CURVE('',#16399,#15927,#16554,.T.);+#16554 = SURFACE_CURVE('',#16555,(#16559,#16566),.PCURVE_S1.);+#16555 = LINE('',#16556,#16557);+#16556 = CARTESIAN_POINT('',(1.299462039412,0.137820884022,+ 9.314404469578E-02));+#16557 = VECTOR('',#16558,1.);+#16558 = DIRECTION('',(0.,0.,1.));+#16559 = PCURVE('',#15970,#16560);+#16560 = DEFINITIONAL_REPRESENTATION('',(#16561),#16565);+#16561 = LINE('',#16562,#16563);+#16562 = CARTESIAN_POINT('',(1.256284942241,-0.1));+#16563 = VECTOR('',#16564,1.);+#16564 = DIRECTION('',(0.,1.));+#16565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16566 = PCURVE('',#15942,#16567);+#16567 = DEFINITIONAL_REPRESENTATION('',(#16568),#16572);+#16568 = LINE('',#16569,#16570);+#16569 = CARTESIAN_POINT('',(6.65064443074E-02,0.));+#16570 = VECTOR('',#16571,1.);+#16571 = DIRECTION('',(0.,1.));+#16572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16573 = ADVANCED_FACE('',(#16574),#15942,.F.);+#16574 = FACE_BOUND('',#16575,.F.);+#16575 = EDGE_LOOP('',(#16576,#16577,#16578,#16599));+#16576 = ORIENTED_EDGE('',*,*,#16553,.T.);+#16577 = ORIENTED_EDGE('',*,*,#15926,.T.);+#16578 = ORIENTED_EDGE('',*,*,#16579,.T.);+#16579 = EDGE_CURVE('',#15899,#16422,#16580,.T.);+#16580 = SURFACE_CURVE('',#16581,(#16585,#16592),.PCURVE_S1.);+#16581 = LINE('',#16582,#16583);+#16582 = CARTESIAN_POINT('',(1.299462039412,7.13144397146E-02,+ 0.193144044696));+#16583 = VECTOR('',#16584,1.);+#16584 = DIRECTION('',(0.,0.,-1.));+#16585 = PCURVE('',#15942,#16586);+#16586 = DEFINITIONAL_REPRESENTATION('',(#16587),#16591);+#16587 = LINE('',#16588,#16589);+#16588 = CARTESIAN_POINT('',(0.,0.1));+#16589 = VECTOR('',#16590,1.);+#16590 = DIRECTION('',(0.,-1.));+#16591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16592 = PCURVE('',#15914,#16593);+#16593 = DEFINITIONAL_REPRESENTATION('',(#16594),#16598);+#16594 = LINE('',#16595,#16596);+#16595 = CARTESIAN_POINT('',(8.00000000254E-02,0.1));+#16596 = VECTOR('',#16597,1.);+#16597 = DIRECTION('',(0.,-1.));+#16598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16599 = ORIENTED_EDGE('',*,*,#16421,.T.);+#16600 = ADVANCED_FACE('',(#16601),#15914,.F.);+#16601 = FACE_BOUND('',#16602,.F.);+#16602 = EDGE_LOOP('',(#16603,#16604,#16605,#16606));+#16603 = ORIENTED_EDGE('',*,*,#16444,.F.);+#16604 = ORIENTED_EDGE('',*,*,#16579,.F.);+#16605 = ORIENTED_EDGE('',*,*,#15898,.F.);+#16606 = ORIENTED_EDGE('',*,*,#16303,.T.);+#16607 = ADVANCED_FACE('',(#16608),#696,.F.);+#16608 = FACE_BOUND('',#16609,.F.);+#16609 = EDGE_LOOP('',(#16610,#16611,#16632,#16633));+#16610 = ORIENTED_EDGE('',*,*,#682,.T.);+#16611 = ORIENTED_EDGE('',*,*,#16612,.T.);+#16612 = EDGE_CURVE('',#655,#15024,#16613,.T.);+#16613 = SURFACE_CURVE('',#16614,(#16618,#16625),.PCURVE_S1.);+#16614 = LINE('',#16615,#16616);+#16615 = CARTESIAN_POINT('',(0.199462039425,1.810692661497,0.));+#16616 = VECTOR('',#16617,1.);+#16617 = DIRECTION('',(0.,0.,1.));+#16618 = PCURVE('',#696,#16619);+#16619 = DEFINITIONAL_REPRESENTATION('',(#16620),#16624);+#16620 = LINE('',#16621,#16622);+#16621 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#16622 = VECTOR('',#16623,1.);+#16623 = DIRECTION('',(0.,1.));+#16624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16625 = PCURVE('',#670,#16626);+#16626 = DEFINITIONAL_REPRESENTATION('',(#16627),#16631);+#16627 = LINE('',#16628,#16629);+#16628 = CARTESIAN_POINT('',(0.249999999999,9.314404469578E-02));+#16629 = VECTOR('',#16630,1.);+#16630 = DIRECTION('',(0.,-1.));+#16631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16632 = ORIENTED_EDGE('',*,*,#15023,.F.);+#16633 = ORIENTED_EDGE('',*,*,#4218,.T.);+#16634 = ADVANCED_FACE('',(#16635),#670,.F.);+#16635 = FACE_BOUND('',#16636,.F.);+#16636 = EDGE_LOOP('',(#16637,#16638,#16659,#16660));+#16637 = ORIENTED_EDGE('',*,*,#654,.F.);+#16638 = ORIENTED_EDGE('',*,*,#16639,.T.);+#16639 = EDGE_CURVE('',#627,#15047,#16640,.T.);+#16640 = SURFACE_CURVE('',#16641,(#16645,#16652),.PCURVE_S1.);+#16641 = LINE('',#16642,#16643);+#16642 = CARTESIAN_POINT('',(0.199462039425,1.560692661501,0.));+#16643 = VECTOR('',#16644,1.);+#16644 = DIRECTION('',(0.,0.,1.));+#16645 = PCURVE('',#670,#16646);+#16646 = DEFINITIONAL_REPRESENTATION('',(#16647),#16651);+#16647 = LINE('',#16648,#16649);+#16648 = CARTESIAN_POINT('',(3.000044657142E-12,9.314404469578E-02));+#16649 = VECTOR('',#16650,1.);+#16650 = DIRECTION('',(0.,-1.));+#16651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16652 = PCURVE('',#642,#16653);+#16653 = DEFINITIONAL_REPRESENTATION('',(#16654),#16658);+#16654 = LINE('',#16655,#16656);+#16655 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#16656 = VECTOR('',#16657,1.);+#16657 = DIRECTION('',(0.,1.));+#16658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16659 = ORIENTED_EDGE('',*,*,#15046,.T.);+#16660 = ORIENTED_EDGE('',*,*,#16612,.F.);+#16661 = ADVANCED_FACE('',(#16662),#642,.F.);+#16662 = FACE_BOUND('',#16663,.F.);+#16663 = EDGE_LOOP('',(#16664,#16665,#16686,#16687));+#16664 = ORIENTED_EDGE('',*,*,#626,.T.);+#16665 = ORIENTED_EDGE('',*,*,#16666,.T.);+#16666 = EDGE_CURVE('',#599,#15070,#16667,.T.);+#16667 = SURFACE_CURVE('',#16668,(#16672,#16679),.PCURVE_S1.);+#16668 = LINE('',#16669,#16670);+#16669 = CARTESIAN_POINT('',(7.446203942237E-02,1.560692661501,0.));+#16670 = VECTOR('',#16671,1.);+#16671 = DIRECTION('',(0.,0.,1.));+#16672 = PCURVE('',#642,#16673);+#16673 = DEFINITIONAL_REPRESENTATION('',(#16674),#16678);+#16674 = LINE('',#16675,#16676);+#16675 = CARTESIAN_POINT('',(7.500000659463E-02,-9.314404469578E-02));+#16676 = VECTOR('',#16677,1.);+#16677 = DIRECTION('',(0.,1.));+#16678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16679 = PCURVE('',#614,#16680);+#16680 = DEFINITIONAL_REPRESENTATION('',(#16681),#16685);+#16681 = LINE('',#16682,#16683);+#16682 = CARTESIAN_POINT('',(8.276472678887E-02,9.314404469578E-02));+#16683 = VECTOR('',#16684,1.);+#16684 = DIRECTION('',(0.,-1.));+#16685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16686 = ORIENTED_EDGE('',*,*,#15069,.F.);+#16687 = ORIENTED_EDGE('',*,*,#16639,.F.);+#16688 = ADVANCED_FACE('',(#16689),#614,.F.);+#16689 = FACE_BOUND('',#16690,.F.);+#16690 = EDGE_LOOP('',(#16691,#16692,#16693,#16694));+#16691 = ORIENTED_EDGE('',*,*,#5136,.T.);+#16692 = ORIENTED_EDGE('',*,*,#15092,.T.);+#16693 = ORIENTED_EDGE('',*,*,#16666,.F.);+#16694 = ORIENTED_EDGE('',*,*,#598,.F.);+#16695 = ADVANCED_FACE('',(#16696),#734,.F.);+#16696 = FACE_BOUND('',#16697,.F.);+#16697 = EDGE_LOOP('',(#16698,#16699,#16700,#16721));+#16698 = ORIENTED_EDGE('',*,*,#4983,.F.);+#16699 = ORIENTED_EDGE('',*,*,#711,.F.);+#16700 = ORIENTED_EDGE('',*,*,#16701,.F.);+#16701 = EDGE_CURVE('',#15188,#712,#16702,.T.);+#16702 = SURFACE_CURVE('',#16703,(#16707,#16714),.PCURVE_S1.);+#16703 = LINE('',#16704,#16705);+#16704 = CARTESIAN_POINT('',(7.446203942479E-02,1.310692661495,+ 9.314404469578E-02));+#16705 = VECTOR('',#16706,1.);+#16706 = DIRECTION('',(0.,0.,-1.));+#16707 = PCURVE('',#734,#16708);+#16708 = DEFINITIONAL_REPRESENTATION('',(#16709),#16713);+#16709 = LINE('',#16710,#16711);+#16710 = CARTESIAN_POINT('',(-8.31567872547E-12,-0.));+#16711 = VECTOR('',#16712,1.);+#16712 = DIRECTION('',(0.,1.));+#16713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16714 = PCURVE('',#867,#16715);+#16715 = DEFINITIONAL_REPRESENTATION('',(#16716),#16720);+#16716 = LINE('',#16717,#16718);+#16717 = CARTESIAN_POINT('',(-6.595630000494E-09,0.));+#16718 = VECTOR('',#16719,1.);+#16719 = DIRECTION('',(0.,-1.));+#16720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16721 = ORIENTED_EDGE('',*,*,#15187,.T.);+#16722 = ADVANCED_FACE('',(#16723),#867,.F.);+#16723 = FACE_BOUND('',#16724,.F.);+#16724 = EDGE_LOOP('',(#16725,#16726,#16747,#16748));+#16725 = ORIENTED_EDGE('',*,*,#853,.T.);+#16726 = ORIENTED_EDGE('',*,*,#16727,.T.);+#16727 = EDGE_CURVE('',#826,#15211,#16728,.T.);+#16728 = SURFACE_CURVE('',#16729,(#16733,#16740),.PCURVE_S1.);+#16729 = LINE('',#16730,#16731);+#16730 = CARTESIAN_POINT('',(0.199462039425,1.310692661495,0.));+#16731 = VECTOR('',#16732,1.);+#16732 = DIRECTION('',(0.,0.,1.));+#16733 = PCURVE('',#867,#16734);+#16734 = DEFINITIONAL_REPRESENTATION('',(#16735),#16739);+#16735 = LINE('',#16736,#16737);+#16736 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#16737 = VECTOR('',#16738,1.);+#16738 = DIRECTION('',(0.,1.));+#16739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16740 = PCURVE('',#841,#16741);+#16741 = DEFINITIONAL_REPRESENTATION('',(#16742),#16746);+#16742 = LINE('',#16743,#16744);+#16743 = CARTESIAN_POINT('',(0.249999999996,9.314404469578E-02));+#16744 = VECTOR('',#16745,1.);+#16745 = DIRECTION('',(0.,-1.));+#16746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16747 = ORIENTED_EDGE('',*,*,#15210,.F.);+#16748 = ORIENTED_EDGE('',*,*,#16701,.T.);+#16749 = ADVANCED_FACE('',(#16750),#841,.F.);+#16750 = FACE_BOUND('',#16751,.F.);+#16751 = EDGE_LOOP('',(#16752,#16753,#16774,#16775));+#16752 = ORIENTED_EDGE('',*,*,#825,.F.);+#16753 = ORIENTED_EDGE('',*,*,#16754,.T.);+#16754 = EDGE_CURVE('',#798,#15234,#16755,.T.);+#16755 = SURFACE_CURVE('',#16756,(#16760,#16767),.PCURVE_S1.);+#16756 = LINE('',#16757,#16758);+#16757 = CARTESIAN_POINT('',(0.199462039425,1.060692661499,0.));+#16758 = VECTOR('',#16759,1.);+#16759 = DIRECTION('',(0.,0.,1.));+#16760 = PCURVE('',#841,#16761);+#16761 = DEFINITIONAL_REPRESENTATION('',(#16762),#16766);+#16762 = LINE('',#16763,#16764);+#16763 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#16764 = VECTOR('',#16765,1.);+#16765 = DIRECTION('',(0.,-1.));+#16766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16767 = PCURVE('',#813,#16768);+#16768 = DEFINITIONAL_REPRESENTATION('',(#16769),#16773);+#16769 = LINE('',#16770,#16771);+#16770 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#16771 = VECTOR('',#16772,1.);+#16772 = DIRECTION('',(0.,1.));+#16773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16774 = ORIENTED_EDGE('',*,*,#15233,.T.);+#16775 = ORIENTED_EDGE('',*,*,#16727,.F.);+#16776 = ADVANCED_FACE('',(#16777),#813,.F.);+#16777 = FACE_BOUND('',#16778,.F.);+#16778 = EDGE_LOOP('',(#16779,#16780,#16801,#16802));+#16779 = ORIENTED_EDGE('',*,*,#797,.T.);+#16780 = ORIENTED_EDGE('',*,*,#16781,.T.);+#16781 = EDGE_CURVE('',#770,#15257,#16782,.T.);+#16782 = SURFACE_CURVE('',#16783,(#16787,#16794),.PCURVE_S1.);+#16783 = LINE('',#16784,#16785);+#16784 = CARTESIAN_POINT('',(7.446203941748E-02,1.060692661499,0.));+#16785 = VECTOR('',#16786,1.);+#16786 = DIRECTION('',(0.,0.,1.));+#16787 = PCURVE('',#813,#16788);+#16788 = DEFINITIONAL_REPRESENTATION('',(#16789),#16793);+#16789 = LINE('',#16790,#16791);+#16790 = CARTESIAN_POINT('',(7.500000659952E-02,-9.314404469578E-02));+#16791 = VECTOR('',#16792,1.);+#16792 = DIRECTION('',(0.,1.));+#16793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16794 = PCURVE('',#785,#16795);+#16795 = DEFINITIONAL_REPRESENTATION('',(#16796),#16800);+#16796 = LINE('',#16797,#16798);+#16797 = CARTESIAN_POINT('',(8.276472678402E-02,9.314404469578E-02));+#16798 = VECTOR('',#16799,1.);+#16799 = DIRECTION('',(0.,-1.));+#16800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16801 = ORIENTED_EDGE('',*,*,#15256,.F.);+#16802 = ORIENTED_EDGE('',*,*,#16754,.F.);+#16803 = ADVANCED_FACE('',(#16804),#785,.F.);+#16804 = FACE_BOUND('',#16805,.F.);+#16805 = EDGE_LOOP('',(#16806,#16807,#16808,#16809));+#16806 = ORIENTED_EDGE('',*,*,#4961,.T.);+#16807 = ORIENTED_EDGE('',*,*,#15279,.T.);+#16808 = ORIENTED_EDGE('',*,*,#16781,.F.);+#16809 = ORIENTED_EDGE('',*,*,#769,.F.);+#16810 = ADVANCED_FACE('',(#16811),#961,.F.);+#16811 = FACE_BOUND('',#16812,.F.);+#16812 = EDGE_LOOP('',(#16813,#16814,#16815,#16836));+#16813 = ORIENTED_EDGE('',*,*,#4808,.F.);+#16814 = ORIENTED_EDGE('',*,*,#945,.T.);+#16815 = ORIENTED_EDGE('',*,*,#16816,.T.);+#16816 = EDGE_CURVE('',#918,#15375,#16817,.T.);+#16817 = SURFACE_CURVE('',#16818,(#16822,#16829),.PCURVE_S1.);+#16818 = LINE('',#16819,#16820);+#16819 = CARTESIAN_POINT('',(7.446204602041E-02,0.810692661502,0.));+#16820 = VECTOR('',#16821,1.);+#16821 = DIRECTION('',(0.,0.,1.));+#16822 = PCURVE('',#961,#16823);+#16823 = DEFINITIONAL_REPRESENTATION('',(#16824),#16828);+#16824 = LINE('',#16825,#16826);+#16825 = CARTESIAN_POINT('',(8.276472676626E-02,-9.314404469578E-02));+#16826 = VECTOR('',#16827,1.);+#16827 = DIRECTION('',(0.,1.));+#16828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16829 = PCURVE('',#933,#16830);+#16830 = DEFINITIONAL_REPRESENTATION('',(#16831),#16835);+#16831 = LINE('',#16832,#16833);+#16832 = CARTESIAN_POINT('',(-1.000588500943E-14,-9.314404469578E-02));+#16833 = VECTOR('',#16834,1.);+#16834 = DIRECTION('',(0.,1.));+#16835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16836 = ORIENTED_EDGE('',*,*,#15374,.T.);+#16837 = ADVANCED_FACE('',(#16838),#933,.F.);+#16838 = FACE_BOUND('',#16839,.F.);+#16839 = EDGE_LOOP('',(#16840,#16841,#16862,#16863));+#16840 = ORIENTED_EDGE('',*,*,#917,.T.);+#16841 = ORIENTED_EDGE('',*,*,#16842,.T.);+#16842 = EDGE_CURVE('',#885,#15398,#16843,.T.);+#16843 = SURFACE_CURVE('',#16844,(#16848,#16855),.PCURVE_S1.);+#16844 = LINE('',#16845,#16846);+#16845 = CARTESIAN_POINT('',(0.199462039425,0.810692661502,0.));+#16846 = VECTOR('',#16847,1.);+#16847 = DIRECTION('',(0.,0.,1.));+#16848 = PCURVE('',#933,#16849);+#16849 = DEFINITIONAL_REPRESENTATION('',(#16850),#16854);+#16850 = LINE('',#16851,#16852);+#16851 = CARTESIAN_POINT('',(0.124999993405,-9.314404469578E-02));+#16852 = VECTOR('',#16853,1.);+#16853 = DIRECTION('',(0.,1.));+#16854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16855 = PCURVE('',#905,#16856);+#16856 = DEFINITIONAL_REPRESENTATION('',(#16857),#16861);+#16857 = LINE('',#16858,#16859);+#16858 = CARTESIAN_POINT('',(0.250000000003,9.314404469578E-02));+#16859 = VECTOR('',#16860,1.);+#16860 = DIRECTION('',(0.,-1.));+#16861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16862 = ORIENTED_EDGE('',*,*,#15397,.F.);+#16863 = ORIENTED_EDGE('',*,*,#16816,.F.);+#16864 = ADVANCED_FACE('',(#16865),#905,.F.);+#16865 = FACE_BOUND('',#16866,.F.);+#16866 = EDGE_LOOP('',(#16867,#16868,#16889,#16890));+#16867 = ORIENTED_EDGE('',*,*,#882,.F.);+#16868 = ORIENTED_EDGE('',*,*,#16869,.T.);+#16869 = EDGE_CURVE('',#883,#15421,#16870,.T.);+#16870 = SURFACE_CURVE('',#16871,(#16875,#16882),.PCURVE_S1.);+#16871 = LINE('',#16872,#16873);+#16872 = CARTESIAN_POINT('',(0.199462039425,0.560692661497,0.));+#16873 = VECTOR('',#16874,1.);+#16874 = DIRECTION('',(0.,0.,1.));+#16875 = PCURVE('',#905,#16876);+#16876 = DEFINITIONAL_REPRESENTATION('',(#16877),#16881);+#16877 = LINE('',#16878,#16879);+#16878 = CARTESIAN_POINT('',(-1.99995575656E-12,9.314404469578E-02));+#16879 = VECTOR('',#16880,1.);+#16880 = DIRECTION('',(0.,-1.));+#16881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16882 = PCURVE('',#1038,#16883);+#16883 = DEFINITIONAL_REPRESENTATION('',(#16884),#16888);+#16884 = LINE('',#16885,#16886);+#16885 = CARTESIAN_POINT('',(-4.9999993408E-02,-9.314404469578E-02));+#16886 = VECTOR('',#16887,1.);+#16887 = DIRECTION('',(0.,1.));+#16888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16889 = ORIENTED_EDGE('',*,*,#15420,.T.);+#16890 = ORIENTED_EDGE('',*,*,#16842,.F.);+#16891 = ADVANCED_FACE('',(#16892),#1038,.F.);+#16892 = FACE_BOUND('',#16893,.F.);+#16893 = EDGE_LOOP('',(#16894,#16895,#16916,#16917));+#16894 = ORIENTED_EDGE('',*,*,#1024,.T.);+#16895 = ORIENTED_EDGE('',*,*,#16896,.T.);+#16896 = EDGE_CURVE('',#997,#15444,#16897,.T.);+#16897 = SURFACE_CURVE('',#16898,(#16902,#16909),.PCURVE_S1.);+#16898 = LINE('',#16899,#16900);+#16899 = CARTESIAN_POINT('',(7.446203941383E-02,0.560692661497,0.));+#16900 = VECTOR('',#16901,1.);+#16901 = DIRECTION('',(0.,0.,1.));+#16902 = PCURVE('',#1038,#16903);+#16903 = DEFINITIONAL_REPRESENTATION('',(#16904),#16908);+#16904 = LINE('',#16905,#16906);+#16905 = CARTESIAN_POINT('',(7.500000660317E-02,-9.314404469578E-02));+#16906 = VECTOR('',#16907,1.);+#16907 = DIRECTION('',(0.,1.));+#16908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16909 = PCURVE('',#1012,#16910);+#16910 = DEFINITIONAL_REPRESENTATION('',(#16911),#16915);+#16911 = LINE('',#16912,#16913);+#16912 = CARTESIAN_POINT('',(8.276472677986E-02,9.314404469578E-02));+#16913 = VECTOR('',#16914,1.);+#16914 = DIRECTION('',(0.,-1.));+#16915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16916 = ORIENTED_EDGE('',*,*,#15443,.F.);+#16917 = ORIENTED_EDGE('',*,*,#16869,.F.);+#16918 = ADVANCED_FACE('',(#16919),#1012,.F.);+#16919 = FACE_BOUND('',#16920,.F.);+#16920 = EDGE_LOOP('',(#16921,#16922,#16923,#16924));+#16921 = ORIENTED_EDGE('',*,*,#4786,.T.);+#16922 = ORIENTED_EDGE('',*,*,#15466,.T.);+#16923 = ORIENTED_EDGE('',*,*,#16896,.F.);+#16924 = ORIENTED_EDGE('',*,*,#996,.F.);+#16925 = ADVANCED_FACE('',(#16926),#2886,.F.);+#16926 = FACE_BOUND('',#16927,.F.);+#16927 = EDGE_LOOP('',(#16928,#16929,#16930,#16953));+#16928 = ORIENTED_EDGE('',*,*,#5311,.F.);+#16929 = ORIENTED_EDGE('',*,*,#2870,.T.);+#16930 = ORIENTED_EDGE('',*,*,#16931,.F.);+#16931 = EDGE_CURVE('',#16932,#2843,#16934,.T.);+#16932 = VERTEX_POINT('',#16933);+#16933 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+ 9.314404469578E-02));+#16934 = SURFACE_CURVE('',#16935,(#16939,#16946),.PCURVE_S1.);+#16935 = LINE('',#16936,#16937);+#16936 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+ 9.314404469578E-02));+#16937 = VECTOR('',#16938,1.);+#16938 = DIRECTION('',(0.,0.,-1.));+#16939 = PCURVE('',#2886,#16940);+#16940 = DEFINITIONAL_REPRESENTATION('',(#16941),#16945);+#16941 = LINE('',#16942,#16943);+#16942 = CARTESIAN_POINT('',(8.276472678274E-02,0.));+#16943 = VECTOR('',#16944,1.);+#16944 = DIRECTION('',(0.,-1.));+#16945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16946 = PCURVE('',#2858,#16947);+#16947 = DEFINITIONAL_REPRESENTATION('',(#16948),#16952);+#16948 = LINE('',#16949,#16950);+#16949 = CARTESIAN_POINT('',(-9.992007221626E-15,0.));+#16950 = VECTOR('',#16951,1.);+#16951 = DIRECTION('',(0.,-1.));+#16952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16953 = ORIENTED_EDGE('',*,*,#16954,.T.);+#16954 = EDGE_CURVE('',#16932,#5312,#16955,.T.);+#16955 = SURFACE_CURVE('',#16956,(#16960,#16967),.PCURVE_S1.);+#16956 = LINE('',#16957,#16958);+#16957 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+ 9.314404469578E-02));+#16958 = VECTOR('',#16959,1.);+#16959 = DIRECTION('',(-0.906183139998,0.422885465325,0.));+#16960 = PCURVE('',#2886,#16961);+#16961 = DEFINITIONAL_REPRESENTATION('',(#16962),#16966);+#16962 = LINE('',#16963,#16964);+#16963 = CARTESIAN_POINT('',(8.276472678274E-02,0.));+#16964 = VECTOR('',#16965,1.);+#16965 = DIRECTION('',(-1.,0.));+#16966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16967 = PCURVE('',#5350,#16968);+#16968 = DEFINITIONAL_REPRESENTATION('',(#16969),#16973);+#16969 = LINE('',#16970,#16971);+#16970 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000312));+#16971 = VECTOR('',#16972,1.);+#16972 = DIRECTION('',(-0.906183139998,0.422885465325));+#16973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16974 = ADVANCED_FACE('',(#16975),#2858,.F.);+#16975 = FACE_BOUND('',#16976,.F.);+#16976 = EDGE_LOOP('',(#16977,#16978,#17001,#17022));+#16977 = ORIENTED_EDGE('',*,*,#2842,.T.);+#16978 = ORIENTED_EDGE('',*,*,#16979,.F.);+#16979 = EDGE_CURVE('',#16980,#2810,#16982,.T.);+#16980 = VERTEX_POINT('',#16981);+#16981 = CARTESIAN_POINT('',(0.774462032874,2.760692661495,+ 9.314404469578E-02));+#16982 = SURFACE_CURVE('',#16983,(#16987,#16994),.PCURVE_S1.);+#16983 = LINE('',#16984,#16985);+#16984 = CARTESIAN_POINT('',(0.774462032845,2.760692661498,+ 9.314404469578E-02));+#16985 = VECTOR('',#16986,1.);+#16986 = DIRECTION('',(-3.19917243E-11,0.,-1.));+#16987 = PCURVE('',#2858,#16988);+#16988 = DEFINITIONAL_REPRESENTATION('',(#16989),#16993);+#16989 = LINE('',#16990,#16991);+#16990 = CARTESIAN_POINT('',(0.699999993428,0.));+#16991 = VECTOR('',#16992,1.);+#16992 = DIRECTION('',(-3.19917243E-11,-1.));+#16993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16994 = PCURVE('',#2830,#16995);+#16995 = DEFINITIONAL_REPRESENTATION('',(#16996),#17000);+#16996 = LINE('',#16997,#16998);+#16997 = CARTESIAN_POINT('',(3.14159265347,9.277572400273E-22));+#16998 = VECTOR('',#16999,1.);+#16999 = DIRECTION('',(2.559337944E-10,1.));+#17000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17001 = ORIENTED_EDGE('',*,*,#17002,.F.);+#17002 = EDGE_CURVE('',#16932,#16980,#17003,.T.);+#17003 = SURFACE_CURVE('',#17004,(#17008,#17015),.PCURVE_S1.);+#17004 = LINE('',#17005,#17006);+#17005 = CARTESIAN_POINT('',(7.446203941748E-02,2.760692661499,+ 9.314404469578E-02));+#17006 = VECTOR('',#17007,1.);+#17007 = DIRECTION('',(1.,-2.2204460701E-12,0.));+#17008 = PCURVE('',#2858,#17009);+#17009 = DEFINITIONAL_REPRESENTATION('',(#17010),#17014);+#17010 = LINE('',#17011,#17012);+#17011 = CARTESIAN_POINT('',(-9.992007221626E-15,0.));+#17012 = VECTOR('',#17013,1.);+#17013 = DIRECTION('',(1.,0.));+#17014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17015 = PCURVE('',#5350,#17016);+#17016 = DEFINITIONAL_REPRESENTATION('',(#17017),#17021);+#17017 = LINE('',#17018,#17019);+#17018 = CARTESIAN_POINT('',(-0.343077893376,-0.125000000312));+#17019 = VECTOR('',#17020,1.);+#17020 = DIRECTION('',(1.,-2.2204460701E-12));+#17021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17022 = ORIENTED_EDGE('',*,*,#16931,.T.);+#17023 = ADVANCED_FACE('',(#17024),#2830,.F.);+#17024 = FACE_BOUND('',#17025,.F.);+#17025 = EDGE_LOOP('',(#17026,#17027,#17050,#17076));+#17026 = ORIENTED_EDGE('',*,*,#2809,.F.);+#17027 = ORIENTED_EDGE('',*,*,#17028,.T.);+#17028 = EDGE_CURVE('',#2782,#17029,#17031,.T.);+#17029 = VERTEX_POINT('',#17030);+#17030 = CARTESIAN_POINT('',(0.77446203282,3.010692661495,+ 9.314404469578E-02));+#17031 = SURFACE_CURVE('',#17032,(#17036,#17043),.PCURVE_S1.);+#17032 = LINE('',#17033,#17034);+#17033 = CARTESIAN_POINT('',(0.774462032827,3.010692661495,0.));+#17034 = VECTOR('',#17035,1.);+#17035 = DIRECTION('',(-7.00027558919E-12,0.,1.));+#17036 = PCURVE('',#2830,#17037);+#17037 = DEFINITIONAL_REPRESENTATION('',(#17038),#17042);+#17038 = LINE('',#17039,#17040);+#17039 = CARTESIAN_POINT('',(0.,9.314404469578E-02));+#17040 = VECTOR('',#17041,1.);+#17041 = DIRECTION('',(0.,-1.));+#17042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17043 = PCURVE('',#2797,#17044);+#17044 = DEFINITIONAL_REPRESENTATION('',(#17045),#17049);+#17045 = LINE('',#17046,#17047);+#17046 = CARTESIAN_POINT('',(-0.624999993431,-9.314404469578E-02));+#17047 = VECTOR('',#17048,1.);+#17048 = DIRECTION('',(7.00027558919E-12,1.));+#17049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17050 = ORIENTED_EDGE('',*,*,#17051,.T.);+#17051 = EDGE_CURVE('',#17029,#16980,#17052,.T.);+#17052 = SURFACE_CURVE('',#17053,(#17058,#17065),.PCURVE_S1.);+#17053 = CIRCLE('',#17054,0.125);+#17054 = AXIS2_PLACEMENT_3D('',#17055,#17056,#17057);+#17055 = CARTESIAN_POINT('',(0.77446203283,2.885692661495,+ 9.314404469578E-02));+#17056 = DIRECTION('',(0.,0.,-1.));+#17057 = DIRECTION('',(-7.764100473651E-11,1.,0.));+#17058 = PCURVE('',#2830,#17059);+#17059 = DEFINITIONAL_REPRESENTATION('',(#17060),#17064);+#17060 = LINE('',#17061,#17062);+#17061 = CARTESIAN_POINT('',(0.,0.));+#17062 = VECTOR('',#17063,1.);+#17063 = DIRECTION('',(1.,0.));+#17064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17065 = PCURVE('',#5350,#17066);+#17066 = DEFINITIONAL_REPRESENTATION('',(#17067),#17075);+#17067 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17068,#17069,#17070,#17071+ ,#17072,#17073,#17074),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17068 = CARTESIAN_POINT('',(0.356922100027,0.124999999684));+#17069 = CARTESIAN_POINT('',(0.573428450973,0.124999999701));+#17070 = CARTESIAN_POINT('',(0.465175275515,-6.25000003076E-02));+#17071 = CARTESIAN_POINT('',(0.356922100056,-0.250000000316));+#17072 = CARTESIAN_POINT('',(0.248668924569,-6.250000032441E-02));+#17073 = CARTESIAN_POINT('',(0.140415749081,0.124999999667));+#17074 = CARTESIAN_POINT('',(0.356922100027,0.124999999684));+#17075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17076 = ORIENTED_EDGE('',*,*,#16979,.T.);+#17077 = ADVANCED_FACE('',(#17078),#2797,.F.);+#17078 = FACE_BOUND('',#17079,.F.);+#17079 = EDGE_LOOP('',(#17080,#17081,#17104,#17125));+#17080 = ORIENTED_EDGE('',*,*,#2781,.T.);+#17081 = ORIENTED_EDGE('',*,*,#17082,.T.);+#17082 = EDGE_CURVE('',#2754,#17083,#17085,.T.);+#17083 = VERTEX_POINT('',#17084);+#17084 = CARTESIAN_POINT('',(7.446203941993E-02,3.010692661496,+ 9.314404469578E-02));+#17085 = SURFACE_CURVE('',#17086,(#17090,#17097),.PCURVE_S1.);+#17086 = LINE('',#17087,#17088);+#17087 = CARTESIAN_POINT('',(7.446203941993E-02,3.010692661496,0.));+#17088 = VECTOR('',#17089,1.);+#17089 = DIRECTION('',(0.,0.,1.));+#17090 = PCURVE('',#2797,#17091);+#17091 = DEFINITIONAL_REPRESENTATION('',(#17092),#17096);+#17092 = LINE('',#17093,#17094);+#17093 = CARTESIAN_POINT('',(7.499999997607E-02,-9.314404469578E-02));+#17094 = VECTOR('',#17095,1.);+#17095 = DIRECTION('',(0.,1.));+#17096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17097 = PCURVE('',#2769,#17098);+#17098 = DEFINITIONAL_REPRESENTATION('',(#17099),#17103);+#17099 = LINE('',#17100,#17101);+#17100 = CARTESIAN_POINT('',(8.276473278661E-02,9.314404469578E-02));+#17101 = VECTOR('',#17102,1.);+#17102 = DIRECTION('',(0.,-1.));+#17103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17104 = ORIENTED_EDGE('',*,*,#17105,.F.);+#17105 = EDGE_CURVE('',#17029,#17083,#17106,.T.);+#17106 = SURFACE_CURVE('',#17107,(#17111,#17118),.PCURVE_S1.);+#17107 = LINE('',#17108,#17109);+#17108 = CARTESIAN_POINT('',(0.774462032827,3.010692661495,+ 9.314404469578E-02));+#17109 = VECTOR('',#17110,1.);+#17110 = DIRECTION('',(-1.,4.872293091104E-13,0.));+#17111 = PCURVE('',#2797,#17112);+#17112 = DEFINITIONAL_REPRESENTATION('',(#17113),#17117);+#17113 = LINE('',#17114,#17115);+#17114 = CARTESIAN_POINT('',(-0.624999993431,0.));+#17115 = VECTOR('',#17116,1.);+#17116 = DIRECTION('',(1.,0.));+#17117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17118 = PCURVE('',#5350,#17119);+#17119 = DEFINITIONAL_REPRESENTATION('',(#17120),#17124);+#17120 = LINE('',#17121,#17122);+#17121 = CARTESIAN_POINT('',(0.356922100034,0.124999999684));+#17122 = VECTOR('',#17123,1.);+#17123 = DIRECTION('',(-1.,4.872293091104E-13));+#17124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17125 = ORIENTED_EDGE('',*,*,#17028,.F.);+#17126 = ADVANCED_FACE('',(#17127),#2769,.F.);+#17127 = FACE_BOUND('',#17128,.F.);+#17128 = EDGE_LOOP('',(#17129,#17130,#17151,#17152));+#17129 = ORIENTED_EDGE('',*,*,#5469,.T.);+#17130 = ORIENTED_EDGE('',*,*,#17131,.T.);+#17131 = EDGE_CURVE('',#5447,#17083,#17132,.T.);+#17132 = SURFACE_CURVE('',#17133,(#17137,#17144),.PCURVE_S1.);+#17133 = LINE('',#17134,#17135);+#17134 = CARTESIAN_POINT('',(0.,2.975943712833,9.314404469578E-02));+#17135 = VECTOR('',#17136,1.);+#17136 = DIRECTION('',(0.906183154294,0.422885434691,0.));+#17137 = PCURVE('',#2769,#17138);+#17138 = DEFINITIONAL_REPRESENTATION('',(#17139),#17143);+#17139 = LINE('',#17140,#17141);+#17140 = CARTESIAN_POINT('',(5.936627694821E-04,0.));+#17141 = VECTOR('',#17142,1.);+#17142 = DIRECTION('',(1.,0.));+#17143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17144 = PCURVE('',#5350,#17145);+#17145 = DEFINITIONAL_REPRESENTATION('',(#17146),#17150);+#17146 = LINE('',#17147,#17148);+#17147 = CARTESIAN_POINT('',(-0.417539932793,9.0251051022E-02));+#17148 = VECTOR('',#17149,1.);+#17149 = DIRECTION('',(0.906183154294,0.422885434691));+#17150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17151 = ORIENTED_EDGE('',*,*,#17082,.F.);+#17152 = ORIENTED_EDGE('',*,*,#2753,.F.);+#17153 = ADVANCED_FACE('',(#17154),#5350,.F.);+#17154 = FACE_BOUND('',#17155,.F.);+#17155 = EDGE_LOOP('',(#17156,#17157,#17158,#17159,#17160,#17161,#17162,+ #17163,#17186,#17214));+#17156 = ORIENTED_EDGE('',*,*,#5334,.F.);+#17157 = ORIENTED_EDGE('',*,*,#16954,.F.);+#17158 = ORIENTED_EDGE('',*,*,#17002,.T.);+#17159 = ORIENTED_EDGE('',*,*,#17051,.F.);+#17160 = ORIENTED_EDGE('',*,*,#17105,.T.);+#17161 = ORIENTED_EDGE('',*,*,#17131,.F.);+#17162 = ORIENTED_EDGE('',*,*,#5446,.F.);+#17163 = ORIENTED_EDGE('',*,*,#17164,.T.);+#17164 = EDGE_CURVE('',#5419,#17165,#17167,.T.);+#17165 = VERTEX_POINT('',#17166);+#17166 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+ 9.314404469578E-02));+#17167 = SURFACE_CURVE('',#17168,(#17172,#17179),.PCURVE_S1.);+#17168 = LINE('',#17169,#17170);+#17169 = CARTESIAN_POINT('',(0.,2.925983916503,9.314404469578E-02));+#17170 = VECTOR('',#17171,1.);+#17171 = DIRECTION('',(1.,0.,0.));+#17172 = PCURVE('',#5350,#17173);+#17173 = DEFINITIONAL_REPRESENTATION('',(#17174),#17178);+#17174 = LINE('',#17175,#17176);+#17175 = CARTESIAN_POINT('',(-0.417539932793,4.0291254692E-02));+#17176 = VECTOR('',#17177,1.);+#17177 = DIRECTION('',(1.,0.));+#17178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17179 = PCURVE('',#5434,#17180);+#17180 = DEFINITIONAL_REPRESENTATION('',(#17181),#17185);+#17181 = LINE('',#17182,#17183);+#17182 = CARTESIAN_POINT('',(5.925868158323E-02,0.1));+#17183 = VECTOR('',#17184,1.);+#17184 = DIRECTION('',(-1.,-0.));+#17185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17186 = ORIENTED_EDGE('',*,*,#17187,.T.);+#17187 = EDGE_CURVE('',#17165,#17188,#17190,.T.);+#17188 = VERTEX_POINT('',#17189);+#17189 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+ 9.314404469578E-02));+#17190 = SURFACE_CURVE('',#17191,(#17195,#17202),.PCURVE_S1.);+#17191 = LINE('',#17192,#17193);+#17192 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+ 9.314404469578E-02));+#17193 = VECTOR('',#17194,1.);+#17194 = DIRECTION('',(0.,-1.,0.));+#17195 = PCURVE('',#5350,#17196);+#17196 = DEFINITIONAL_REPRESENTATION('',(#17197),#17201);+#17197 = LINE('',#17198,#17199);+#17198 = CARTESIAN_POINT('',(-0.3610844747,4.0291254692E-02));+#17199 = VECTOR('',#17200,1.);+#17200 = DIRECTION('',(0.,-1.));+#17201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17202 = PCURVE('',#17203,#17208);+#17203 = PLANE('',#17204);+#17204 = AXIS2_PLACEMENT_3D('',#17205,#17206,#17207);+#17205 = CARTESIAN_POINT('',(5.645545809334E-02,3.084616552949,+ 0.193144044696));+#17206 = DIRECTION('',(-1.,0.,0.));+#17207 = DIRECTION('',(0.,-1.,0.));+#17208 = DEFINITIONAL_REPRESENTATION('',(#17209),#17213);+#17209 = LINE('',#17210,#17211);+#17210 = CARTESIAN_POINT('',(0.158632636446,-0.1));+#17211 = VECTOR('',#17212,1.);+#17212 = DIRECTION('',(1.,0.));+#17213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17214 = ORIENTED_EDGE('',*,*,#17215,.T.);+#17215 = EDGE_CURVE('',#17188,#5335,#17216,.T.);+#17216 = SURFACE_CURVE('',#17217,(#17221,#17228),.PCURVE_S1.);+#17217 = LINE('',#17218,#17219);+#17218 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+ 9.314404469578E-02));+#17219 = VECTOR('',#17220,1.);+#17220 = DIRECTION('',(-1.,0.,0.));+#17221 = PCURVE('',#5350,#17222);+#17222 = DEFINITIONAL_REPRESENTATION('',(#17223),#17227);+#17223 = LINE('',#17224,#17225);+#17224 = CARTESIAN_POINT('',(-0.3610844747,-3.970874531E-02));+#17225 = VECTOR('',#17226,1.);+#17226 = DIRECTION('',(-1.,0.));+#17227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17228 = PCURVE('',#5378,#17229);+#17229 = DEFINITIONAL_REPRESENTATION('',(#17230),#17234);+#17230 = LINE('',#17231,#17232);+#17231 = CARTESIAN_POINT('',(0.132196776519,0.1));+#17232 = VECTOR('',#17233,1.);+#17233 = DIRECTION('',(-1.,0.));+#17234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17235 = ADVANCED_FACE('',(#17236),#5434,.T.);+#17236 = FACE_BOUND('',#17237,.F.);+#17237 = EDGE_LOOP('',(#17238,#17239,#17262,#17283));+#17238 = ORIENTED_EDGE('',*,*,#5418,.F.);+#17239 = ORIENTED_EDGE('',*,*,#17240,.F.);+#17240 = EDGE_CURVE('',#17241,#5391,#17243,.T.);+#17241 = VERTEX_POINT('',#17242);+#17242 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+ 0.193144044696));+#17243 = SURFACE_CURVE('',#17244,(#17248,#17255),.PCURVE_S1.);+#17244 = LINE('',#17245,#17246);+#17245 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+ 0.193144044696));+#17246 = VECTOR('',#17247,1.);+#17247 = DIRECTION('',(-1.,0.,0.));+#17248 = PCURVE('',#5434,#17249);+#17249 = DEFINITIONAL_REPRESENTATION('',(#17250),#17254);+#17250 = LINE('',#17251,#17252);+#17251 = CARTESIAN_POINT('',(2.80322348989E-03,0.));+#17252 = VECTOR('',#17253,1.);+#17253 = DIRECTION('',(1.,0.));+#17254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17255 = PCURVE('',#5406,#17256);+#17256 = DEFINITIONAL_REPRESENTATION('',(#17257),#17261);+#17257 = LINE('',#17258,#17259);+#17258 = CARTESIAN_POINT('',(-0.764073635093,5.4317844719E-02));+#17259 = VECTOR('',#17260,1.);+#17260 = DIRECTION('',(-1.,0.));+#17261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17262 = ORIENTED_EDGE('',*,*,#17263,.T.);+#17263 = EDGE_CURVE('',#17241,#17165,#17264,.T.);+#17264 = SURFACE_CURVE('',#17265,(#17269,#17276),.PCURVE_S1.);+#17265 = LINE('',#17266,#17267);+#17266 = CARTESIAN_POINT('',(5.645545809334E-02,2.925983916503,+ 0.193144044696));+#17267 = VECTOR('',#17268,1.);+#17268 = DIRECTION('',(0.,0.,-1.));+#17269 = PCURVE('',#5434,#17270);+#17270 = DEFINITIONAL_REPRESENTATION('',(#17271),#17275);+#17271 = LINE('',#17272,#17273);+#17272 = CARTESIAN_POINT('',(2.80322348989E-03,0.));+#17273 = VECTOR('',#17274,1.);+#17274 = DIRECTION('',(0.,1.));+#17275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17276 = PCURVE('',#17203,#17277);+#17277 = DEFINITIONAL_REPRESENTATION('',(#17278),#17282);+#17278 = LINE('',#17279,#17280);+#17279 = CARTESIAN_POINT('',(0.158632636446,0.));+#17280 = VECTOR('',#17281,1.);+#17281 = DIRECTION('',(0.,-1.));+#17282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17283 = ORIENTED_EDGE('',*,*,#17164,.F.);+#17284 = ADVANCED_FACE('',(#17285),#5406,.F.);+#17285 = FACE_BOUND('',#17286,.F.);+#17286 = EDGE_LOOP('',(#17287,#17288,#17311,#17332));+#17287 = ORIENTED_EDGE('',*,*,#5390,.F.);+#17288 = ORIENTED_EDGE('',*,*,#17289,.F.);+#17289 = EDGE_CURVE('',#17290,#5363,#17292,.T.);+#17290 = VERTEX_POINT('',#17291);+#17291 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+ 0.193144044696));+#17292 = SURFACE_CURVE('',#17293,(#17297,#17304),.PCURVE_S1.);+#17293 = LINE('',#17294,#17295);+#17294 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+ 0.193144044696));+#17295 = VECTOR('',#17296,1.);+#17296 = DIRECTION('',(-1.,0.,0.));+#17297 = PCURVE('',#5406,#17298);+#17298 = DEFINITIONAL_REPRESENTATION('',(#17299),#17303);+#17299 = LINE('',#17300,#17301);+#17300 = CARTESIAN_POINT('',(-0.764073635093,-2.5682155283E-02));+#17301 = VECTOR('',#17302,1.);+#17302 = DIRECTION('',(-1.,0.));+#17303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17304 = PCURVE('',#5378,#17305);+#17305 = DEFINITIONAL_REPRESENTATION('',(#17306),#17310);+#17306 = LINE('',#17307,#17308);+#17307 = CARTESIAN_POINT('',(0.132196776519,0.));+#17308 = VECTOR('',#17309,1.);+#17309 = DIRECTION('',(-1.,0.));+#17310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17311 = ORIENTED_EDGE('',*,*,#17312,.T.);+#17312 = EDGE_CURVE('',#17290,#17241,#17313,.T.);+#17313 = SURFACE_CURVE('',#17314,(#17318,#17325),.PCURVE_S1.);+#17314 = LINE('',#17315,#17316);+#17315 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+ 0.193144044696));+#17316 = VECTOR('',#17317,1.);+#17317 = DIRECTION('',(0.,1.,0.));+#17318 = PCURVE('',#5406,#17319);+#17319 = DEFINITIONAL_REPRESENTATION('',(#17320),#17324);+#17320 = LINE('',#17321,#17322);+#17321 = CARTESIAN_POINT('',(-0.764073635093,-2.5682155283E-02));+#17322 = VECTOR('',#17323,1.);+#17323 = DIRECTION('',(0.,1.));+#17324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17325 = PCURVE('',#17203,#17326);+#17326 = DEFINITIONAL_REPRESENTATION('',(#17327),#17331);+#17327 = LINE('',#17328,#17329);+#17328 = CARTESIAN_POINT('',(0.238632636448,0.));+#17329 = VECTOR('',#17330,1.);+#17330 = DIRECTION('',(-1.,0.));+#17331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17332 = ORIENTED_EDGE('',*,*,#17240,.T.);+#17333 = ADVANCED_FACE('',(#17334),#5378,.T.);+#17334 = FACE_BOUND('',#17335,.F.);+#17335 = EDGE_LOOP('',(#17336,#17337,#17338,#17359));+#17336 = ORIENTED_EDGE('',*,*,#5362,.T.);+#17337 = ORIENTED_EDGE('',*,*,#17215,.F.);+#17338 = ORIENTED_EDGE('',*,*,#17339,.F.);+#17339 = EDGE_CURVE('',#17290,#17188,#17340,.T.);+#17340 = SURFACE_CURVE('',#17341,(#17345,#17352),.PCURVE_S1.);+#17341 = LINE('',#17342,#17343);+#17342 = CARTESIAN_POINT('',(5.645545809334E-02,2.845983916501,+ 0.193144044696));+#17343 = VECTOR('',#17344,1.);+#17344 = DIRECTION('',(0.,0.,-1.));+#17345 = PCURVE('',#5378,#17346);+#17346 = DEFINITIONAL_REPRESENTATION('',(#17347),#17351);+#17347 = LINE('',#17348,#17349);+#17348 = CARTESIAN_POINT('',(0.132196776519,0.));+#17349 = VECTOR('',#17350,1.);+#17350 = DIRECTION('',(0.,1.));+#17351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17352 = PCURVE('',#17203,#17353);+#17353 = DEFINITIONAL_REPRESENTATION('',(#17354),#17358);+#17354 = LINE('',#17355,#17356);+#17355 = CARTESIAN_POINT('',(0.238632636448,0.));+#17356 = VECTOR('',#17357,1.);+#17357 = DIRECTION('',(0.,-1.));+#17358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17359 = ORIENTED_EDGE('',*,*,#17289,.T.);+#17360 = ADVANCED_FACE('',(#17361),#17203,.T.);+#17361 = FACE_BOUND('',#17362,.F.);+#17362 = EDGE_LOOP('',(#17363,#17364,#17365,#17366));+#17363 = ORIENTED_EDGE('',*,*,#17339,.T.);+#17364 = ORIENTED_EDGE('',*,*,#17187,.F.);+#17365 = ORIENTED_EDGE('',*,*,#17263,.F.);+#17366 = ORIENTED_EDGE('',*,*,#17312,.F.);+#17367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#17371)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#17368,#17369,#17370)) +REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#17368 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#17369 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#17370 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#17371 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#17368,+ 'distance_accuracy_value','confusion accuracy');+#17372 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#17373,#17375);+#17373 = ( REPRESENTATION_RELATIONSHIP('','',#109,#82) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#17374) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#17374 = ITEM_DEFINED_TRANSFORMATION('','',#11,#83);+#17375 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #17376);+#17376 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','MOLD_CPOMPOUND_1','',#77,+ #104,$);+#17377 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#106));+#17378 = SHAPE_DEFINITION_REPRESENTATION(#17379,#17385);+#17379 = PRODUCT_DEFINITION_SHAPE('','',#17380);+#17380 = PRODUCT_DEFINITION('design','',#17381,#17384);+#17381 = PRODUCT_DEFINITION_FORMATION('','',#17382);+#17382 = PRODUCT('LF_NEW_2_AF0_ASM','LF_NEW_2_AF0_ASM','',(#17383));+#17383 = PRODUCT_CONTEXT('',#2,'mechanical');+#17384 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#17385 = SHAPE_REPRESENTATION('',(#11,#17386,#17390,#17394,#17398,#17402+ ,#17406,#17410,#17414,#17418,#17422),#17426);+#17386 = AXIS2_PLACEMENT_3D('',#17387,#17388,#17389);+#17387 = CARTESIAN_POINT('',(0.,0.,0.));+#17388 = DIRECTION('',(0.,0.,1.));+#17389 = DIRECTION('',(1.,0.,0.));+#17390 = AXIS2_PLACEMENT_3D('',#17391,#17392,#17393);+#17391 = CARTESIAN_POINT('',(0.,0.,0.));+#17392 = DIRECTION('',(0.,0.,1.));+#17393 = DIRECTION('',(1.,0.,0.));+#17394 = AXIS2_PLACEMENT_3D('',#17395,#17396,#17397);+#17395 = CARTESIAN_POINT('',(0.,0.,0.));+#17396 = DIRECTION('',(0.,0.,1.));+#17397 = DIRECTION('',(1.,0.,0.));+#17398 = AXIS2_PLACEMENT_3D('',#17399,#17400,#17401);+#17399 = CARTESIAN_POINT('',(0.,0.,0.));+#17400 = DIRECTION('',(0.,0.,1.));+#17401 = DIRECTION('',(1.,0.,0.));+#17402 = AXIS2_PLACEMENT_3D('',#17403,#17404,#17405);+#17403 = CARTESIAN_POINT('',(0.,0.,0.));+#17404 = DIRECTION('',(0.,0.,1.));+#17405 = DIRECTION('',(1.,0.,0.));+#17406 = AXIS2_PLACEMENT_3D('',#17407,#17408,#17409);+#17407 = CARTESIAN_POINT('',(0.,0.,0.));+#17408 = DIRECTION('',(0.,0.,1.));+#17409 = DIRECTION('',(1.,0.,0.));+#17410 = AXIS2_PLACEMENT_3D('',#17411,#17412,#17413);+#17411 = CARTESIAN_POINT('',(0.,0.,0.));+#17412 = DIRECTION('',(0.,0.,1.));+#17413 = DIRECTION('',(1.,0.,0.));+#17414 = AXIS2_PLACEMENT_3D('',#17415,#17416,#17417);+#17415 = CARTESIAN_POINT('',(0.,0.,0.));+#17416 = DIRECTION('',(0.,0.,1.));+#17417 = DIRECTION('',(1.,0.,0.));+#17418 = AXIS2_PLACEMENT_3D('',#17419,#17420,#17421);+#17419 = CARTESIAN_POINT('',(0.,0.,0.));+#17420 = DIRECTION('',(0.,0.,1.));+#17421 = DIRECTION('',(1.,0.,0.));+#17422 = AXIS2_PLACEMENT_3D('',#17423,#17424,#17425);+#17423 = CARTESIAN_POINT('',(0.,0.,0.));+#17424 = DIRECTION('',(0.,0.,1.));+#17425 = DIRECTION('',(1.,0.,0.));+#17426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#17430)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#17427,#17428,#17429)) +REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#17427 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#17428 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#17429 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#17430 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#17427,+ 'distance_accuracy_value','confusion accuracy');+#17431 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#17432,#17434);+#17432 = ( REPRESENTATION_RELATIONSHIP('','',#17385,#82) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#17433) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#17433 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87);+#17434 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #17435);+#17435 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12','LF_NEW_2_1','',#77,#17380,+ $);+#17436 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#17382));+#17437 = SHAPE_DEFINITION_REPRESENTATION(#17438,#17444);+#17438 = PRODUCT_DEFINITION_SHAPE('','',#17439);+#17439 = PRODUCT_DEFINITION('design','',#17440,#17443);+#17440 = PRODUCT_DEFINITION_FORMATION('','',#17441);+#17441 = PRODUCT('SOLID1-489_AF0','SOLID1-489_AF0','',(#17442));+#17442 = PRODUCT_CONTEXT('',#2,'mechanical');+#17443 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#17444 = SHAPE_REPRESENTATION('',(#11,#17445,#21069),#21711);+#17445 = MANIFOLD_SOLID_BREP('',#17446);+#17446 = CLOSED_SHELL('',(#17447,#18304,#18487,#18665,#18843,#19021,+ #19919,#19968,#20039,#20110,#20181,#20230,#20257,#20284,#20331,+ #20358,#20405,#20412,#20419,#20426,#20433,#20440,#20447,#20474,+ #20501,#20528,#20555,#20562,#20589,#20616,#20643,#20670,#20677,+ #20704,#20731,#20758,#20785,#20792,#20819,#20846,#20873,#20900,+ #20927,#20954,#20981,#21008,#21035,#21062));+#17447 = ADVANCED_FACE('',(#17448),#17462,.F.);+#17448 = FACE_BOUND('',#17449,.F.);+#17449 = EDGE_LOOP('',(#17450,#17485,#17513,#17541,#17569,#17597,#17630,+ #17658,#17690,#17718,#17746,#17774,#17802,#17830,#17858,#17886,+ #17914,#17942,#17970,#17998,#18026,#18054,#18082,#18110,#18138,+ #18166,#18194,#18222,#18250,#18278));+#17450 = ORIENTED_EDGE('',*,*,#17451,.F.);+#17451 = EDGE_CURVE('',#17452,#17454,#17456,.T.);+#17452 = VERTEX_POINT('',#17453);+#17453 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,-0.1));+#17454 = VERTEX_POINT('',#17455);+#17455 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,-0.1));+#17456 = SURFACE_CURVE('',#17457,(#17461,#17473),.PCURVE_S1.);+#17457 = LINE('',#17458,#17459);+#17458 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,-0.1));+#17459 = VECTOR('',#17460,1.);+#17460 = DIRECTION('',(0.,1.,0.));+#17461 = PCURVE('',#17462,#17467);+#17462 = PLANE('',#17463);+#17463 = AXIS2_PLACEMENT_3D('',#17464,#17465,#17466);+#17464 = CARTESIAN_POINT('',(0.445267411281,0.790763807489,-0.1));+#17465 = DIRECTION('',(0.,0.,1.));+#17466 = DIRECTION('',(1.,0.,-0.));+#17467 = DEFINITIONAL_REPRESENTATION('',(#17468),#17472);+#17468 = LINE('',#17469,#17470);+#17469 = CARTESIAN_POINT('',(-0.594729450677,-0.88101485576));+#17470 = VECTOR('',#17471,1.);+#17471 = DIRECTION('',(0.,1.));+#17472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17473 = PCURVE('',#17474,#17479);+#17474 = PLANE('',#17475);+#17475 = AXIS2_PLACEMENT_3D('',#17476,#17477,#17478);+#17476 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#17477 = DIRECTION('',(1.,0.,0.));+#17478 = DIRECTION('',(-0.,1.,0.));+#17479 = DEFINITIONAL_REPRESENTATION('',(#17480),#17484);+#17480 = LINE('',#17481,#17482);+#17481 = CARTESIAN_POINT('',(0.345441613228,2.5E-02));+#17482 = VECTOR('',#17483,1.);+#17483 = DIRECTION('',(1.,0.));+#17484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17485 = ORIENTED_EDGE('',*,*,#17486,.F.);+#17486 = EDGE_CURVE('',#17487,#17452,#17489,.T.);+#17487 = VERTEX_POINT('',#17488);+#17488 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.124999999999,-0.1));+#17489 = SURFACE_CURVE('',#17490,(#17494,#17501),.PCURVE_S1.);+#17490 = LINE('',#17491,#17492);+#17491 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.124999999999,-0.1));+#17492 = VECTOR('',#17493,1.);+#17493 = DIRECTION('',(-0.906183139993,0.422885465336,0.));+#17494 = PCURVE('',#17462,#17495);+#17495 = DEFINITIONAL_REPRESENTATION('',(#17496),#17500);+#17496 = LINE('',#17497,#17498);+#17497 = CARTESIAN_POINT('',(-0.52026741126,-0.915763807488));+#17498 = VECTOR('',#17499,1.);+#17499 = DIRECTION('',(-0.906183139993,0.422885465336));+#17500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17501 = PCURVE('',#17502,#17507);+#17502 = PLANE('',#17503);+#17503 = AXIS2_PLACEMENT_3D('',#17504,#17505,#17506);+#17504 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.125,0.));+#17505 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#17506 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#17507 = DEFINITIONAL_REPRESENTATION('',(#17508),#17512);+#17508 = LINE('',#17509,#17510);+#17509 = CARTESIAN_POINT('',(4.228803023163E-13,0.1));+#17510 = VECTOR('',#17511,1.);+#17511 = DIRECTION('',(1.,0.));+#17512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17513 = ORIENTED_EDGE('',*,*,#17514,.T.);+#17514 = EDGE_CURVE('',#17487,#17515,#17517,.T.);+#17515 = VERTEX_POINT('',#17516);+#17516 = CARTESIAN_POINT('',(5.000000002838E-02,-0.125,-0.1));+#17517 = SURFACE_CURVE('',#17518,(#17522,#17529),.PCURVE_S1.);+#17518 = LINE('',#17519,#17520);+#17519 = CARTESIAN_POINT('',(-7.49999999789E-02,-0.124999999999,-0.1));+#17520 = VECTOR('',#17521,1.);+#17521 = DIRECTION('',(1.,-3.033129303099E-12,0.));+#17522 = PCURVE('',#17462,#17523);+#17523 = DEFINITIONAL_REPRESENTATION('',(#17524),#17528);+#17524 = LINE('',#17525,#17526);+#17525 = CARTESIAN_POINT('',(-0.52026741126,-0.915763807488));+#17526 = VECTOR('',#17527,1.);+#17527 = DIRECTION('',(1.,-3.033129303099E-12));+#17528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17529 = PCURVE('',#17530,#17535);+#17530 = PLANE('',#17531);+#17531 = AXIS2_PLACEMENT_3D('',#17532,#17533,#17534);+#17532 = CARTESIAN_POINT('',(-7.499999337597E-02,-0.124999999998,0.));+#17533 = DIRECTION('',(0.,-1.,0.));+#17534 = DIRECTION('',(1.,0.,0.));+#17535 = DEFINITIONAL_REPRESENTATION('',(#17536),#17540);+#17536 = LINE('',#17537,#17538);+#17537 = CARTESIAN_POINT('',(-6.602929994437E-09,-0.1));+#17538 = VECTOR('',#17539,1.);+#17539 = DIRECTION('',(1.,0.));+#17540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17541 = ORIENTED_EDGE('',*,*,#17542,.T.);+#17542 = EDGE_CURVE('',#17515,#17543,#17545,.T.);+#17543 = VERTEX_POINT('',#17544);+#17544 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,-0.1));+#17545 = SURFACE_CURVE('',#17546,(#17550,#17557),.PCURVE_S1.);+#17546 = LINE('',#17547,#17548);+#17547 = CARTESIAN_POINT('',(5.000000002838E-02,-0.125,-0.1));+#17548 = VECTOR('',#17549,1.);+#17549 = DIRECTION('',(0.,-1.,0.));+#17550 = PCURVE('',#17462,#17551);+#17551 = DEFINITIONAL_REPRESENTATION('',(#17552),#17556);+#17552 = LINE('',#17553,#17554);+#17553 = CARTESIAN_POINT('',(-0.395267411253,-0.915763807489));+#17554 = VECTOR('',#17555,1.);+#17555 = DIRECTION('',(0.,-1.));+#17556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17557 = PCURVE('',#17558,#17563);+#17558 = PLANE('',#17559);+#17559 = AXIS2_PLACEMENT_3D('',#17560,#17561,#17562);+#17560 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,0.));+#17561 = DIRECTION('',(-1.,0.,0.));+#17562 = DIRECTION('',(0.,1.,0.));+#17563 = DEFINITIONAL_REPRESENTATION('',(#17564),#17568);+#17564 = LINE('',#17565,#17566);+#17565 = CARTESIAN_POINT('',(0.1,0.1));+#17566 = VECTOR('',#17567,1.);+#17567 = DIRECTION('',(-1.,0.));+#17568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17569 = ORIENTED_EDGE('',*,*,#17570,.T.);+#17570 = EDGE_CURVE('',#17543,#17571,#17573,.T.);+#17571 = VERTEX_POINT('',#17572);+#17572 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,-0.1));+#17573 = SURFACE_CURVE('',#17574,(#17578,#17585),.PCURVE_S1.);+#17574 = LINE('',#17575,#17576);+#17575 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,-0.1));+#17576 = VECTOR('',#17577,1.);+#17577 = DIRECTION('',(1.,6.30868135507E-11,0.));+#17578 = PCURVE('',#17462,#17579);+#17579 = DEFINITIONAL_REPRESENTATION('',(#17580),#17584);+#17580 = LINE('',#17581,#17582);+#17581 = CARTESIAN_POINT('',(-0.395267411253,-1.015763807489));+#17582 = VECTOR('',#17583,1.);+#17583 = DIRECTION('',(1.,6.30868135507E-11));+#17584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17585 = PCURVE('',#17586,#17591);+#17586 = PLANE('',#17587);+#17587 = AXIS2_PLACEMENT_3D('',#17588,#17589,#17590);+#17588 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,0.));+#17589 = DIRECTION('',(6.309619493527E-11,-1.,0.));+#17590 = DIRECTION('',(-1.,-6.309619493527E-11,0.));+#17591 = DEFINITIONAL_REPRESENTATION('',(#17592),#17596);+#17592 = LINE('',#17593,#17594);+#17593 = CARTESIAN_POINT('',(1.000000000004,0.1));+#17594 = VECTOR('',#17595,1.);+#17595 = DIRECTION('',(-1.,0.));+#17596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17597 = ORIENTED_EDGE('',*,*,#17598,.F.);+#17598 = EDGE_CURVE('',#17599,#17571,#17601,.T.);+#17599 = VERTEX_POINT('',#17600);+#17600 = CARTESIAN_POINT('',(1.150000000041,-0.125000000008,-0.1));+#17601 = SURFACE_CURVE('',#17602,(#17607,#17618),.PCURVE_S1.);+#17602 = CIRCLE('',#17603,9.999999999127E-02);+#17603 = AXIS2_PLACEMENT_3D('',#17604,#17605,#17606);+#17604 = CARTESIAN_POINT('',(1.05000000005,-0.124999999946,-0.1));+#17605 = DIRECTION('',(0.,0.,-1.));+#17606 = DIRECTION('',(1.,-6.234508743142E-10,0.));+#17607 = PCURVE('',#17462,#17608);+#17608 = DEFINITIONAL_REPRESENTATION('',(#17609),#17617);+#17609 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17610,#17611,#17612,#17613+ ,#17614,#17615,#17616),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17610 = CARTESIAN_POINT('',(0.70473258876,-0.915763807497));+#17611 = CARTESIAN_POINT('',(0.704732588652,-1.088968888239));+#17612 = CARTESIAN_POINT('',(0.554732588719,-1.002366347775));+#17613 = CARTESIAN_POINT('',(0.404732588786,-0.91576380731));+#17614 = CARTESIAN_POINT('',(0.554732588827,-0.829161267033));+#17615 = CARTESIAN_POINT('',(0.704732588868,-0.742558726756));+#17616 = CARTESIAN_POINT('',(0.70473258876,-0.915763807497));+#17617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17618 = PCURVE('',#17619,#17624);+#17619 = CYLINDRICAL_SURFACE('',#17620,9.999999999127E-02);+#17620 = AXIS2_PLACEMENT_3D('',#17621,#17622,#17623);+#17621 = CARTESIAN_POINT('',(1.05000000005,-0.124999999946,0.));+#17622 = DIRECTION('',(0.,0.,-1.));+#17623 = DIRECTION('',(1.,1.847411113272E-11,0.));+#17624 = DEFINITIONAL_REPRESENTATION('',(#17625),#17629);+#17625 = LINE('',#17626,#17627);+#17626 = CARTESIAN_POINT('',(0.,0.1));+#17627 = VECTOR('',#17628,1.);+#17628 = DIRECTION('',(1.,0.));+#17629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17630 = ORIENTED_EDGE('',*,*,#17631,.T.);+#17631 = EDGE_CURVE('',#17599,#17632,#17634,.T.);+#17632 = VERTEX_POINT('',#17633);+#17633 = CARTESIAN_POINT('',(1.150000000028,1.724906848558,-0.1));+#17634 = SURFACE_CURVE('',#17635,(#17639,#17646),.PCURVE_S1.);+#17635 = LINE('',#17636,#17637);+#17636 = CARTESIAN_POINT('',(1.150000000037,-0.124999999966,-0.1));+#17637 = VECTOR('',#17638,1.);+#17638 = DIRECTION('',(-4.46584193006E-12,1.,0.));+#17639 = PCURVE('',#17462,#17640);+#17640 = DEFINITIONAL_REPRESENTATION('',(#17641),#17645);+#17641 = LINE('',#17642,#17643);+#17642 = CARTESIAN_POINT('',(0.704732588756,-0.915763807455));+#17643 = VECTOR('',#17644,1.);+#17644 = DIRECTION('',(-4.46584193006E-12,1.));+#17645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17646 = PCURVE('',#17647,#17652);+#17647 = PLANE('',#17648);+#17648 = AXIS2_PLACEMENT_3D('',#17649,#17650,#17651);+#17649 = CARTESIAN_POINT('',(1.150000000034,1.724906848609,0.));+#17650 = DIRECTION('',(1.,0.,0.));+#17651 = DIRECTION('',(0.,-1.,0.));+#17652 = DEFINITIONAL_REPRESENTATION('',(#17653),#17657);+#17653 = LINE('',#17654,#17655);+#17654 = CARTESIAN_POINT('',(1.849906848575,0.1));+#17655 = VECTOR('',#17656,1.);+#17656 = DIRECTION('',(-1.,0.));+#17657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17658 = ORIENTED_EDGE('',*,*,#17659,.F.);+#17659 = EDGE_CURVE('',#17660,#17632,#17662,.T.);+#17660 = VERTEX_POINT('',#17661);+#17661 = CARTESIAN_POINT('',(1.049999999859,1.824906848609,-0.1));+#17662 = SURFACE_CURVE('',#17663,(#17668,#17679),.PCURVE_S1.);+#17663 = CIRCLE('',#17664,0.100000000003);+#17664 = AXIS2_PLACEMENT_3D('',#17665,#17666,#17667);+#17665 = CARTESIAN_POINT('',(1.050000000014,1.724906848606,-0.1));+#17666 = DIRECTION('',(0.,0.,-1.));+#17667 = DIRECTION('',(-1.54604551379E-09,1.,0.));+#17668 = PCURVE('',#17462,#17669);+#17669 = DEFINITIONAL_REPRESENTATION('',(#17670),#17678);+#17670 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17671,#17672,#17673,#17674+ ,#17675,#17676,#17677),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17671 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#17672 = CARTESIAN_POINT('',(0.77793766934,1.034143041388));+#17673 = CARTESIAN_POINT('',(0.691335129191,0.884143041249));+#17674 = CARTESIAN_POINT('',(0.604732589042,0.734143041111));+#17675 = CARTESIAN_POINT('',(0.518130048429,0.884143040982));+#17676 = CARTESIAN_POINT('',(0.431527507816,1.034143040852));+#17677 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#17678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17679 = PCURVE('',#17680,#17685);+#17680 = CYLINDRICAL_SURFACE('',#17681,0.100000000003);+#17681 = AXIS2_PLACEMENT_3D('',#17682,#17683,#17684);+#17682 = CARTESIAN_POINT('',(1.050000000014,1.724906848606,0.));+#17683 = DIRECTION('',(0.,0.,-1.));+#17684 = DIRECTION('',(0.,1.,0.));+#17685 = DEFINITIONAL_REPRESENTATION('',(#17686),#17689);+#17686 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17687,#17688),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.570796328821),.PIECEWISE_BEZIER_KNOTS.);+#17687 = CARTESIAN_POINT('',(0.,0.1));+#17688 = CARTESIAN_POINT('',(1.570796327275,0.1));+#17689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17690 = ORIENTED_EDGE('',*,*,#17691,.T.);+#17691 = EDGE_CURVE('',#17660,#17692,#17694,.T.);+#17692 = VERTEX_POINT('',#17693);+#17693 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,-0.1));+#17694 = SURFACE_CURVE('',#17695,(#17699,#17706),.PCURVE_S1.);+#17695 = LINE('',#17696,#17697);+#17696 = CARTESIAN_POINT('',(1.049999999962,1.82490684862,-0.1));+#17697 = VECTOR('',#17698,1.);+#17698 = DIRECTION('',(-1.,-1.178638311891E-11,0.));+#17699 = PCURVE('',#17462,#17700);+#17700 = DEFINITIONAL_REPRESENTATION('',(#17701),#17705);+#17701 = LINE('',#17702,#17703);+#17702 = CARTESIAN_POINT('',(0.604732588681,1.034143041131));+#17703 = VECTOR('',#17704,1.);+#17704 = DIRECTION('',(-1.,-1.178638311891E-11));+#17705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17706 = PCURVE('',#17707,#17712);+#17707 = PLANE('',#17708);+#17708 = AXIS2_PLACEMENT_3D('',#17709,#17710,#17711);+#17709 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,0.));+#17710 = DIRECTION('',(-1.762217382144E-11,1.,0.));+#17711 = DIRECTION('',(1.,1.762217382144E-11,0.));+#17712 = DEFINITIONAL_REPRESENTATION('',(#17713),#17717);+#17713 = LINE('',#17714,#17715);+#17714 = CARTESIAN_POINT('',(0.999959484255,0.1));+#17715 = VECTOR('',#17716,1.);+#17716 = DIRECTION('',(-1.,-0.));+#17717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17718 = ORIENTED_EDGE('',*,*,#17719,.T.);+#17719 = EDGE_CURVE('',#17692,#17720,#17722,.T.);+#17720 = VERTEX_POINT('',#17721);+#17721 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000001,-0.1));+#17722 = SURFACE_CURVE('',#17723,(#17727,#17734),.PCURVE_S1.);+#17723 = LINE('',#17724,#17725);+#17724 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,-0.1));+#17725 = VECTOR('',#17726,1.);+#17726 = DIRECTION('',(-2.026727863385E-04,-0.999999979462,0.));+#17727 = PCURVE('',#17462,#17728);+#17728 = DEFINITIONAL_REPRESENTATION('',(#17729),#17733);+#17729 = LINE('',#17730,#17731);+#17730 = CARTESIAN_POINT('',(-0.395226895574,1.03414304112));+#17731 = VECTOR('',#17732,1.);+#17732 = DIRECTION('',(-2.026727863385E-04,-0.999999979462));+#17733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17734 = PCURVE('',#17735,#17740);+#17735 = PLANE('',#17736);+#17736 = AXIS2_PLACEMENT_3D('',#17737,#17738,#17739);+#17737 = CARTESIAN_POINT('',(5.000000002838E-02,1.625,0.));+#17738 = DIRECTION('',(-0.999999979462,2.026727863372E-04,0.));+#17739 = DIRECTION('',(2.026727863372E-04,0.999999979462,0.));+#17740 = DEFINITIONAL_REPRESENTATION('',(#17741),#17745);+#17741 = LINE('',#17742,#17743);+#17742 = CARTESIAN_POINT('',(0.199906852715,0.1));+#17743 = VECTOR('',#17744,1.);+#17744 = DIRECTION('',(-1.,-0.));+#17745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17746 = ORIENTED_EDGE('',*,*,#17747,.T.);+#17747 = EDGE_CURVE('',#17720,#17748,#17750,.T.);+#17748 = VERTEX_POINT('',#17749);+#17749 = CARTESIAN_POINT('',(-7.49999999789E-02,1.625000000001,-0.1));+#17750 = SURFACE_CURVE('',#17751,(#17755,#17762),.PCURVE_S1.);+#17751 = LINE('',#17752,#17753);+#17752 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000001,-0.1));+#17753 = VECTOR('',#17754,1.);+#17754 = DIRECTION('',(-1.,-3.035793838358E-12,0.));+#17755 = PCURVE('',#17462,#17756);+#17756 = DEFINITIONAL_REPRESENTATION('',(#17757),#17761);+#17757 = LINE('',#17758,#17759);+#17758 = CARTESIAN_POINT('',(-0.395267411253,0.834236192512));+#17759 = VECTOR('',#17760,1.);+#17760 = DIRECTION('',(-1.,-3.035793838358E-12));+#17761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17762 = PCURVE('',#17763,#17768);+#17763 = PLANE('',#17764);+#17764 = AXIS2_PLACEMENT_3D('',#17765,#17766,#17767);+#17765 = CARTESIAN_POINT('',(6.621121428907E-09,1.625000000004,0.));+#17766 = DIRECTION('',(0.,1.,0.));+#17767 = DIRECTION('',(-1.,0.,0.));+#17768 = DEFINITIONAL_REPRESENTATION('',(#17769),#17773);+#17769 = LINE('',#17770,#17771);+#17770 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#17771 = VECTOR('',#17772,1.);+#17772 = DIRECTION('',(1.,0.));+#17773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17774 = ORIENTED_EDGE('',*,*,#17775,.F.);+#17775 = EDGE_CURVE('',#17776,#17748,#17778,.T.);+#17776 = VERTEX_POINT('',#17777);+#17777 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,-0.1));+#17778 = SURFACE_CURVE('',#17779,(#17783,#17790),.PCURVE_S1.);+#17779 = LINE('',#17780,#17781);+#17780 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,-0.1));+#17781 = VECTOR('',#17782,1.);+#17782 = DIRECTION('',(0.906183139984,0.422885465355,0.));+#17783 = PCURVE('',#17462,#17784);+#17784 = DEFINITIONAL_REPRESENTATION('',(#17785),#17789);+#17785 = LINE('',#17786,#17787);+#17786 = CARTESIAN_POINT('',(-0.594729450677,0.799487240781));+#17787 = VECTOR('',#17788,1.);+#17788 = DIRECTION('',(0.906183139984,0.422885465355));+#17789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17790 = PCURVE('',#17791,#17796);+#17791 = PLANE('',#17792);+#17792 = AXIS2_PLACEMENT_3D('',#17793,#17794,#17795);+#17793 = CARTESIAN_POINT('',(-0.149999999976,1.59,0.));+#17794 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#17795 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#17796 = DEFINITIONAL_REPRESENTATION('',(#17797),#17801);+#17797 = LINE('',#17798,#17799);+#17798 = CARTESIAN_POINT('',(5.936554720576E-04,0.1));+#17799 = VECTOR('',#17800,1.);+#17800 = DIRECTION('',(1.,0.));+#17801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17802 = ORIENTED_EDGE('',*,*,#17803,.F.);+#17803 = EDGE_CURVE('',#17804,#17776,#17806,.T.);+#17804 = VERTEX_POINT('',#17805);+#17805 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,-0.1));+#17806 = SURFACE_CURVE('',#17807,(#17811,#17818),.PCURVE_S1.);+#17807 = LINE('',#17808,#17809);+#17808 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,-0.1));+#17809 = VECTOR('',#17810,1.);+#17810 = DIRECTION('',(0.,1.,0.));+#17811 = PCURVE('',#17462,#17812);+#17812 = DEFINITIONAL_REPRESENTATION('',(#17813),#17817);+#17813 = LINE('',#17814,#17815);+#17814 = CARTESIAN_POINT('',(-0.594729450677,0.61898514424));+#17815 = VECTOR('',#17816,1.);+#17816 = DIRECTION('',(0.,1.));+#17817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17818 = PCURVE('',#17819,#17824);+#17819 = PLANE('',#17820);+#17820 = AXIS2_PLACEMENT_3D('',#17821,#17822,#17823);+#17821 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#17822 = DIRECTION('',(1.,0.,0.));+#17823 = DIRECTION('',(-0.,1.,0.));+#17824 = DEFINITIONAL_REPRESENTATION('',(#17825),#17829);+#17825 = LINE('',#17826,#17827);+#17826 = CARTESIAN_POINT('',(1.845441613228,2.5E-02));+#17827 = VECTOR('',#17828,1.);+#17828 = DIRECTION('',(1.,0.));+#17829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17830 = ORIENTED_EDGE('',*,*,#17831,.F.);+#17831 = EDGE_CURVE('',#17832,#17804,#17834,.T.);+#17832 = VERTEX_POINT('',#17833);+#17833 = CARTESIAN_POINT('',(-7.49999999789E-02,1.374999999999,-0.1));+#17834 = SURFACE_CURVE('',#17835,(#17839,#17846),.PCURVE_S1.);+#17835 = LINE('',#17836,#17837);+#17836 = CARTESIAN_POINT('',(-7.49999999789E-02,1.374999999999,-0.1));+#17837 = VECTOR('',#17838,1.);+#17838 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#17839 = PCURVE('',#17462,#17840);+#17840 = DEFINITIONAL_REPRESENTATION('',(#17841),#17845);+#17841 = LINE('',#17842,#17843);+#17842 = CARTESIAN_POINT('',(-0.52026741126,0.58423619251));+#17843 = VECTOR('',#17844,1.);+#17844 = DIRECTION('',(-0.906183139987,0.422885465348));+#17845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17846 = PCURVE('',#17847,#17852);+#17847 = PLANE('',#17848);+#17848 = AXIS2_PLACEMENT_3D('',#17849,#17850,#17851);+#17849 = CARTESIAN_POINT('',(-7.49999999789E-02,1.375,0.));+#17850 = DIRECTION('',(-0.422885465342,-0.90618313999,0.));+#17851 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#17852 = DEFINITIONAL_REPRESENTATION('',(#17853),#17857);+#17853 = LINE('',#17854,#17855);+#17854 = CARTESIAN_POINT('',(-4.228828174798E-13,0.1));+#17855 = VECTOR('',#17856,1.);+#17856 = DIRECTION('',(1.,0.));+#17857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17858 = ORIENTED_EDGE('',*,*,#17859,.T.);+#17859 = EDGE_CURVE('',#17832,#17860,#17862,.T.);+#17860 = VERTEX_POINT('',#17861);+#17861 = CARTESIAN_POINT('',(5.000000002838E-02,1.374999999999,-0.1));+#17862 = SURFACE_CURVE('',#17863,(#17867,#17874),.PCURVE_S1.);+#17863 = LINE('',#17864,#17865);+#17864 = CARTESIAN_POINT('',(-7.49999999789E-02,1.374999999999,-0.1));+#17865 = VECTOR('',#17866,1.);+#17866 = DIRECTION('',(1.,0.,0.));+#17867 = PCURVE('',#17462,#17868);+#17868 = DEFINITIONAL_REPRESENTATION('',(#17869),#17873);+#17869 = LINE('',#17870,#17871);+#17870 = CARTESIAN_POINT('',(-0.52026741126,0.58423619251));+#17871 = VECTOR('',#17872,1.);+#17872 = DIRECTION('',(1.,0.));+#17873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17874 = PCURVE('',#17875,#17880);+#17875 = PLANE('',#17876);+#17876 = AXIS2_PLACEMENT_3D('',#17877,#17878,#17879);+#17877 = CARTESIAN_POINT('',(-7.499999337597E-02,1.374999999998,0.));+#17878 = DIRECTION('',(0.,-1.,0.));+#17879 = DIRECTION('',(1.,0.,0.));+#17880 = DEFINITIONAL_REPRESENTATION('',(#17881),#17885);+#17881 = LINE('',#17882,#17883);+#17882 = CARTESIAN_POINT('',(-6.602929994437E-09,-0.1));+#17883 = VECTOR('',#17884,1.);+#17884 = DIRECTION('',(1.,0.));+#17885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17886 = ORIENTED_EDGE('',*,*,#17887,.T.);+#17887 = EDGE_CURVE('',#17860,#17888,#17890,.T.);+#17888 = VERTEX_POINT('',#17889);+#17889 = CARTESIAN_POINT('',(5.000000002838E-02,1.125,-0.1));+#17890 = SURFACE_CURVE('',#17891,(#17895,#17902),.PCURVE_S1.);+#17891 = LINE('',#17892,#17893);+#17892 = CARTESIAN_POINT('',(5.000000002838E-02,1.374999999999,-0.1));+#17893 = VECTOR('',#17894,1.);+#17894 = DIRECTION('',(0.,-1.,0.));+#17895 = PCURVE('',#17462,#17896);+#17896 = DEFINITIONAL_REPRESENTATION('',(#17897),#17901);+#17897 = LINE('',#17898,#17899);+#17898 = CARTESIAN_POINT('',(-0.395267411253,0.58423619251));+#17899 = VECTOR('',#17900,1.);+#17900 = DIRECTION('',(0.,-1.));+#17901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17902 = PCURVE('',#17903,#17908);+#17903 = PLANE('',#17904);+#17904 = AXIS2_PLACEMENT_3D('',#17905,#17906,#17907);+#17905 = CARTESIAN_POINT('',(5.000000002838E-02,1.125,0.));+#17906 = DIRECTION('',(-1.,0.,0.));+#17907 = DIRECTION('',(0.,1.,0.));+#17908 = DEFINITIONAL_REPRESENTATION('',(#17909),#17913);+#17909 = LINE('',#17910,#17911);+#17910 = CARTESIAN_POINT('',(0.249999999999,0.1));+#17911 = VECTOR('',#17912,1.);+#17912 = DIRECTION('',(-1.,0.));+#17913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17914 = ORIENTED_EDGE('',*,*,#17915,.T.);+#17915 = EDGE_CURVE('',#17888,#17916,#17918,.T.);+#17916 = VERTEX_POINT('',#17917);+#17917 = CARTESIAN_POINT('',(-7.499999997889E-02,1.125,-0.1));+#17918 = SURFACE_CURVE('',#17919,(#17923,#17930),.PCURVE_S1.);+#17919 = LINE('',#17920,#17921);+#17920 = CARTESIAN_POINT('',(5.000000002838E-02,1.125,-0.1));+#17921 = VECTOR('',#17922,1.);+#17922 = DIRECTION('',(-1.,-1.776356839297E-14,0.));+#17923 = PCURVE('',#17462,#17924);+#17924 = DEFINITIONAL_REPRESENTATION('',(#17925),#17929);+#17925 = LINE('',#17926,#17927);+#17926 = CARTESIAN_POINT('',(-0.395267411253,0.334236192511));+#17927 = VECTOR('',#17928,1.);+#17928 = DIRECTION('',(-1.,-1.776356839297E-14));+#17929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17930 = PCURVE('',#17931,#17936);+#17931 = PLANE('',#17932);+#17932 = AXIS2_PLACEMENT_3D('',#17933,#17934,#17935);+#17933 = CARTESIAN_POINT('',(6.621121428907E-09,1.125000000002,0.));+#17934 = DIRECTION('',(0.,1.,0.));+#17935 = DIRECTION('',(-1.,0.,0.));+#17936 = DEFINITIONAL_REPRESENTATION('',(#17937),#17941);+#17937 = LINE('',#17938,#17939);+#17938 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#17939 = VECTOR('',#17940,1.);+#17940 = DIRECTION('',(1.,0.));+#17941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17942 = ORIENTED_EDGE('',*,*,#17943,.F.);+#17943 = EDGE_CURVE('',#17944,#17916,#17946,.T.);+#17944 = VERTEX_POINT('',#17945);+#17945 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,-0.1));+#17946 = SURFACE_CURVE('',#17947,(#17951,#17958),.PCURVE_S1.);+#17947 = LINE('',#17948,#17949);+#17948 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,-0.1));+#17949 = VECTOR('',#17950,1.);+#17950 = DIRECTION('',(0.906183139987,0.42288546535,0.));+#17951 = PCURVE('',#17462,#17952);+#17952 = DEFINITIONAL_REPRESENTATION('',(#17953),#17957);+#17953 = LINE('',#17954,#17955);+#17954 = CARTESIAN_POINT('',(-0.594729450677,0.299487240781));+#17955 = VECTOR('',#17956,1.);+#17956 = DIRECTION('',(0.906183139987,0.42288546535));+#17957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17958 = PCURVE('',#17959,#17964);+#17959 = PLANE('',#17960);+#17960 = AXIS2_PLACEMENT_3D('',#17961,#17962,#17963);+#17961 = CARTESIAN_POINT('',(-0.149999999976,1.09,0.));+#17962 = DIRECTION('',(-0.422885465342,0.90618313999,0.));+#17963 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#17964 = DEFINITIONAL_REPRESENTATION('',(#17965),#17969);+#17965 = LINE('',#17966,#17967);+#17966 = CARTESIAN_POINT('',(5.936554720576E-04,0.1));+#17967 = VECTOR('',#17968,1.);+#17968 = DIRECTION('',(1.,0.));+#17969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17970 = ORIENTED_EDGE('',*,*,#17971,.F.);+#17971 = EDGE_CURVE('',#17972,#17944,#17974,.T.);+#17972 = VERTEX_POINT('',#17973);+#17973 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,-0.1));+#17974 = SURFACE_CURVE('',#17975,(#17979,#17986),.PCURVE_S1.);+#17975 = LINE('',#17976,#17977);+#17976 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,-0.1));+#17977 = VECTOR('',#17978,1.);+#17978 = DIRECTION('',(0.,1.,0.));+#17979 = PCURVE('',#17462,#17980);+#17980 = DEFINITIONAL_REPRESENTATION('',(#17981),#17985);+#17981 = LINE('',#17982,#17983);+#17982 = CARTESIAN_POINT('',(-0.594729450677,0.118985144241));+#17983 = VECTOR('',#17984,1.);+#17984 = DIRECTION('',(0.,1.));+#17985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17986 = PCURVE('',#17987,#17992);+#17987 = PLANE('',#17988);+#17988 = AXIS2_PLACEMENT_3D('',#17989,#17990,#17991);+#17989 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#17990 = DIRECTION('',(1.,0.,0.));+#17991 = DIRECTION('',(-0.,1.,0.));+#17992 = DEFINITIONAL_REPRESENTATION('',(#17993),#17997);+#17993 = LINE('',#17994,#17995);+#17994 = CARTESIAN_POINT('',(1.345441613229,2.5E-02));+#17995 = VECTOR('',#17996,1.);+#17996 = DIRECTION('',(1.,0.));+#17997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17998 = ORIENTED_EDGE('',*,*,#17999,.F.);+#17999 = EDGE_CURVE('',#18000,#17972,#18002,.T.);+#18000 = VERTEX_POINT('',#18001);+#18001 = CARTESIAN_POINT('',(-7.49999999789E-02,0.874999999999,-0.1));+#18002 = SURFACE_CURVE('',#18003,(#18007,#18014),.PCURVE_S1.);+#18003 = LINE('',#18004,#18005);+#18004 = CARTESIAN_POINT('',(-7.49999999789E-02,0.874999999999,-0.1));+#18005 = VECTOR('',#18006,1.);+#18006 = DIRECTION('',(-0.906183139982,0.422885465359,0.));+#18007 = PCURVE('',#17462,#18008);+#18008 = DEFINITIONAL_REPRESENTATION('',(#18009),#18013);+#18009 = LINE('',#18010,#18011);+#18010 = CARTESIAN_POINT('',(-0.52026741126,8.423619251E-02));+#18011 = VECTOR('',#18012,1.);+#18012 = DIRECTION('',(-0.906183139982,0.422885465359));+#18013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18014 = PCURVE('',#18015,#18020);+#18015 = PLANE('',#18016);+#18016 = AXIS2_PLACEMENT_3D('',#18017,#18018,#18019);+#18017 = CARTESIAN_POINT('',(-7.49999999789E-02,0.875,0.));+#18018 = DIRECTION('',(-0.422885465348,-0.906183139987,0.));+#18019 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#18020 = DEFINITIONAL_REPRESENTATION('',(#18021),#18025);+#18021 = LINE('',#18022,#18023);+#18022 = CARTESIAN_POINT('',(-4.228920397458E-13,0.1));+#18023 = VECTOR('',#18024,1.);+#18024 = DIRECTION('',(1.,0.));+#18025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18026 = ORIENTED_EDGE('',*,*,#18027,.T.);+#18027 = EDGE_CURVE('',#18000,#18028,#18030,.T.);+#18028 = VERTEX_POINT('',#18029);+#18029 = CARTESIAN_POINT('',(5.000000002838E-02,0.874999999999,-0.1));+#18030 = SURFACE_CURVE('',#18031,(#18035,#18042),.PCURVE_S1.);+#18031 = LINE('',#18032,#18033);+#18032 = CARTESIAN_POINT('',(-7.49999999789E-02,0.874999999999,-0.1));+#18033 = VECTOR('',#18034,1.);+#18034 = DIRECTION('',(1.,0.,0.));+#18035 = PCURVE('',#17462,#18036);+#18036 = DEFINITIONAL_REPRESENTATION('',(#18037),#18041);+#18037 = LINE('',#18038,#18039);+#18038 = CARTESIAN_POINT('',(-0.52026741126,8.423619251E-02));+#18039 = VECTOR('',#18040,1.);+#18040 = DIRECTION('',(1.,0.));+#18041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18042 = PCURVE('',#18043,#18048);+#18043 = PLANE('',#18044);+#18044 = AXIS2_PLACEMENT_3D('',#18045,#18046,#18047);+#18045 = CARTESIAN_POINT('',(-7.499999337597E-02,0.874999999996,0.));+#18046 = DIRECTION('',(0.,-1.,0.));+#18047 = DIRECTION('',(1.,0.,0.));+#18048 = DEFINITIONAL_REPRESENTATION('',(#18049),#18053);+#18049 = LINE('',#18050,#18051);+#18050 = CARTESIAN_POINT('',(-6.602929994437E-09,-0.1));+#18051 = VECTOR('',#18052,1.);+#18052 = DIRECTION('',(1.,0.));+#18053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18054 = ORIENTED_EDGE('',*,*,#18055,.T.);+#18055 = EDGE_CURVE('',#18028,#18056,#18058,.T.);+#18056 = VERTEX_POINT('',#18057);+#18057 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,-0.1));+#18058 = SURFACE_CURVE('',#18059,(#18063,#18070),.PCURVE_S1.);+#18059 = LINE('',#18060,#18061);+#18060 = CARTESIAN_POINT('',(5.000000002838E-02,0.874999999999,-0.1));+#18061 = VECTOR('',#18062,1.);+#18062 = DIRECTION('',(0.,-1.,0.));+#18063 = PCURVE('',#17462,#18064);+#18064 = DEFINITIONAL_REPRESENTATION('',(#18065),#18069);+#18065 = LINE('',#18066,#18067);+#18066 = CARTESIAN_POINT('',(-0.395267411253,8.423619251E-02));+#18067 = VECTOR('',#18068,1.);+#18068 = DIRECTION('',(0.,-1.));+#18069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18070 = PCURVE('',#18071,#18076);+#18071 = PLANE('',#18072);+#18072 = AXIS2_PLACEMENT_3D('',#18073,#18074,#18075);+#18073 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#18074 = DIRECTION('',(-1.,0.,0.));+#18075 = DIRECTION('',(0.,1.,0.));+#18076 = DEFINITIONAL_REPRESENTATION('',(#18077),#18081);+#18077 = LINE('',#18078,#18079);+#18078 = CARTESIAN_POINT('',(0.249999999999,0.1));+#18079 = VECTOR('',#18080,1.);+#18080 = DIRECTION('',(-1.,0.));+#18081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18082 = ORIENTED_EDGE('',*,*,#18083,.T.);+#18083 = EDGE_CURVE('',#18056,#18084,#18086,.T.);+#18084 = VERTEX_POINT('',#18085);+#18085 = CARTESIAN_POINT('',(-7.49999999789E-02,0.625,-0.1));+#18086 = SURFACE_CURVE('',#18087,(#18091,#18098),.PCURVE_S1.);+#18087 = LINE('',#18088,#18089);+#18088 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,-0.1));+#18089 = VECTOR('',#18090,1.);+#18090 = DIRECTION('',(-1.,0.,0.));+#18091 = PCURVE('',#17462,#18092);+#18092 = DEFINITIONAL_REPRESENTATION('',(#18093),#18097);+#18093 = LINE('',#18094,#18095);+#18094 = CARTESIAN_POINT('',(-0.395267411253,-0.165763807489));+#18095 = VECTOR('',#18096,1.);+#18096 = DIRECTION('',(-1.,0.));+#18097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18098 = PCURVE('',#18099,#18104);+#18099 = PLANE('',#18100);+#18100 = AXIS2_PLACEMENT_3D('',#18101,#18102,#18103);+#18101 = CARTESIAN_POINT('',(6.621121428907E-09,0.625,0.));+#18102 = DIRECTION('',(0.,1.,0.));+#18103 = DIRECTION('',(-1.,0.,0.));+#18104 = DEFINITIONAL_REPRESENTATION('',(#18105),#18109);+#18105 = LINE('',#18106,#18107);+#18106 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#18107 = VECTOR('',#18108,1.);+#18108 = DIRECTION('',(1.,0.));+#18109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18110 = ORIENTED_EDGE('',*,*,#18111,.F.);+#18111 = EDGE_CURVE('',#18112,#18084,#18114,.T.);+#18112 = VERTEX_POINT('',#18113);+#18113 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,-0.1));+#18114 = SURFACE_CURVE('',#18115,(#18119,#18126),.PCURVE_S1.);+#18115 = LINE('',#18116,#18117);+#18116 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,-0.1));+#18117 = VECTOR('',#18118,1.);+#18118 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#18119 = PCURVE('',#17462,#18120);+#18120 = DEFINITIONAL_REPRESENTATION('',(#18121),#18125);+#18121 = LINE('',#18122,#18123);+#18122 = CARTESIAN_POINT('',(-0.594729450677,-0.200512759219));+#18123 = VECTOR('',#18124,1.);+#18124 = DIRECTION('',(0.906183139987,0.422885465348));+#18125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18126 = PCURVE('',#18127,#18132);+#18127 = PLANE('',#18128);+#18128 = AXIS2_PLACEMENT_3D('',#18129,#18130,#18131);+#18129 = CARTESIAN_POINT('',(-0.149999999976,0.59,0.));+#18130 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#18131 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#18132 = DEFINITIONAL_REPRESENTATION('',(#18133),#18137);+#18133 = LINE('',#18134,#18135);+#18134 = CARTESIAN_POINT('',(5.936554720576E-04,0.1));+#18135 = VECTOR('',#18136,1.);+#18136 = DIRECTION('',(1.,0.));+#18137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18138 = ORIENTED_EDGE('',*,*,#18139,.F.);+#18139 = EDGE_CURVE('',#18140,#18112,#18142,.T.);+#18140 = VERTEX_POINT('',#18141);+#18141 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,-0.1));+#18142 = SURFACE_CURVE('',#18143,(#18147,#18154),.PCURVE_S1.);+#18143 = LINE('',#18144,#18145);+#18144 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,-0.1));+#18145 = VECTOR('',#18146,1.);+#18146 = DIRECTION('',(0.,1.,0.));+#18147 = PCURVE('',#17462,#18148);+#18148 = DEFINITIONAL_REPRESENTATION('',(#18149),#18153);+#18149 = LINE('',#18150,#18151);+#18150 = CARTESIAN_POINT('',(-0.594729450677,-0.381014852668));+#18151 = VECTOR('',#18152,1.);+#18152 = DIRECTION('',(0.,1.));+#18153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18154 = PCURVE('',#18155,#18160);+#18155 = PLANE('',#18156);+#18156 = AXIS2_PLACEMENT_3D('',#18157,#18158,#18159);+#18157 = CARTESIAN_POINT('',(-0.149462039396,-0.435692661499,-0.125));+#18158 = DIRECTION('',(1.,0.,0.));+#18159 = DIRECTION('',(-0.,1.,0.));+#18160 = DEFINITIONAL_REPRESENTATION('',(#18161),#18165);+#18161 = LINE('',#18162,#18163);+#18162 = CARTESIAN_POINT('',(0.84544161632,2.5E-02));+#18163 = VECTOR('',#18164,1.);+#18164 = DIRECTION('',(1.,0.));+#18165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18166 = ORIENTED_EDGE('',*,*,#18167,.F.);+#18167 = EDGE_CURVE('',#18168,#18140,#18170,.T.);+#18168 = VERTEX_POINT('',#18169);+#18169 = CARTESIAN_POINT('',(-7.499999958486E-02,0.375000000846,-0.1));+#18170 = SURFACE_CURVE('',#18171,(#18175,#18182),.PCURVE_S1.);+#18171 = LINE('',#18172,#18173);+#18172 = CARTESIAN_POINT('',(-7.499999958486E-02,0.375000000846,-0.1));+#18173 = VECTOR('',#18174,1.);+#18174 = DIRECTION('',(-0.906183130373,0.42288548595,0.));+#18175 = PCURVE('',#17462,#18176);+#18176 = DEFINITIONAL_REPRESENTATION('',(#18177),#18181);+#18177 = LINE('',#18178,#18179);+#18178 = CARTESIAN_POINT('',(-0.520267410866,-0.415763806643));+#18179 = VECTOR('',#18180,1.);+#18180 = DIRECTION('',(-0.906183130373,0.42288548595));+#18181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18182 = PCURVE('',#18183,#18188);+#18183 = PLANE('',#18184);+#18184 = AXIS2_PLACEMENT_3D('',#18185,#18186,#18187);+#18185 = CARTESIAN_POINT('',(-0.149999993355,0.410000000002,0.));+#18186 = DIRECTION('',(-0.422885465409,-0.906183139959,0.));+#18187 = DIRECTION('',(0.906183139959,-0.422885465409,0.));+#18188 = DEFINITIONAL_REPRESENTATION('',(#18189),#18193);+#18189 = LINE('',#18190,#18191);+#18190 = CARTESIAN_POINT('',(8.276472078392E-02,-0.1));+#18191 = VECTOR('',#18192,1.);+#18192 = DIRECTION('',(-1.,0.));+#18193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18194 = ORIENTED_EDGE('',*,*,#18195,.T.);+#18195 = EDGE_CURVE('',#18168,#18196,#18198,.T.);+#18196 = VERTEX_POINT('',#18197);+#18197 = CARTESIAN_POINT('',(5.000000002838E-02,0.375000000001,-0.1));+#18198 = SURFACE_CURVE('',#18199,(#18203,#18210),.PCURVE_S1.);+#18199 = LINE('',#18200,#18201);+#18200 = CARTESIAN_POINT('',(-7.499999958486E-02,0.375000000846,-0.1));+#18201 = VECTOR('',#18202,1.);+#18202 = DIRECTION('',(1.,-6.758019942359E-09,0.));+#18203 = PCURVE('',#17462,#18204);+#18204 = DEFINITIONAL_REPRESENTATION('',(#18205),#18209);+#18205 = LINE('',#18206,#18207);+#18206 = CARTESIAN_POINT('',(-0.520267410866,-0.415763806643));+#18207 = VECTOR('',#18208,1.);+#18208 = DIRECTION('',(1.,-6.758019942359E-09));+#18209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18210 = PCURVE('',#18211,#18216);+#18211 = PLANE('',#18212);+#18212 = AXIS2_PLACEMENT_3D('',#18213,#18214,#18215);+#18213 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#18214 = DIRECTION('',(0.,-1.,0.));+#18215 = DIRECTION('',(1.,0.,0.));+#18216 = DEFINITIONAL_REPRESENTATION('',(#18217),#18221);+#18217 = LINE('',#18218,#18219);+#18218 = CARTESIAN_POINT('',(-6.20888999936E-09,-0.1));+#18219 = VECTOR('',#18220,1.);+#18220 = DIRECTION('',(1.,0.));+#18221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18222 = ORIENTED_EDGE('',*,*,#18223,.T.);+#18223 = EDGE_CURVE('',#18196,#18224,#18226,.T.);+#18224 = VERTEX_POINT('',#18225);+#18225 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999999,-0.1));+#18226 = SURFACE_CURVE('',#18227,(#18231,#18238),.PCURVE_S1.);+#18227 = LINE('',#18228,#18229);+#18228 = CARTESIAN_POINT('',(5.000000002838E-02,0.375000000001,-0.1));+#18229 = VECTOR('',#18230,1.);+#18230 = DIRECTION('',(0.,-1.,0.));+#18231 = PCURVE('',#17462,#18232);+#18232 = DEFINITIONAL_REPRESENTATION('',(#18233),#18237);+#18233 = LINE('',#18234,#18235);+#18234 = CARTESIAN_POINT('',(-0.395267411253,-0.415763807488));+#18235 = VECTOR('',#18236,1.);+#18236 = DIRECTION('',(0.,-1.));+#18237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18238 = PCURVE('',#18239,#18244);+#18239 = PLANE('',#18240);+#18240 = AXIS2_PLACEMENT_3D('',#18241,#18242,#18243);+#18241 = CARTESIAN_POINT('',(5.000000002838E-02,0.125,0.));+#18242 = DIRECTION('',(-1.,0.,0.));+#18243 = DIRECTION('',(0.,1.,0.));+#18244 = DEFINITIONAL_REPRESENTATION('',(#18245),#18249);+#18245 = LINE('',#18246,#18247);+#18246 = CARTESIAN_POINT('',(0.250000000001,0.1));+#18247 = VECTOR('',#18248,1.);+#18248 = DIRECTION('',(-1.,0.));+#18249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18250 = ORIENTED_EDGE('',*,*,#18251,.T.);+#18251 = EDGE_CURVE('',#18224,#18252,#18254,.T.);+#18252 = VERTEX_POINT('',#18253);+#18253 = CARTESIAN_POINT('',(-7.49999999789E-02,0.124999999999,-0.1));+#18254 = SURFACE_CURVE('',#18255,(#18259,#18266),.PCURVE_S1.);+#18255 = LINE('',#18256,#18257);+#18256 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999999,-0.1));+#18257 = VECTOR('',#18258,1.);+#18258 = DIRECTION('',(-1.,0.,0.));+#18259 = PCURVE('',#17462,#18260);+#18260 = DEFINITIONAL_REPRESENTATION('',(#18261),#18265);+#18261 = LINE('',#18262,#18263);+#18262 = CARTESIAN_POINT('',(-0.395267411253,-0.66576380749));+#18263 = VECTOR('',#18264,1.);+#18264 = DIRECTION('',(-1.,0.));+#18265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18266 = PCURVE('',#18267,#18272);+#18267 = PLANE('',#18268);+#18268 = AXIS2_PLACEMENT_3D('',#18269,#18270,#18271);+#18269 = CARTESIAN_POINT('',(6.621121428907E-09,0.124999999998,0.));+#18270 = DIRECTION('',(0.,1.,0.));+#18271 = DIRECTION('',(-1.,0.,0.));+#18272 = DEFINITIONAL_REPRESENTATION('',(#18273),#18277);+#18273 = LINE('',#18274,#18275);+#18274 = CARTESIAN_POINT('',(-4.999999340726E-02,-0.1));+#18275 = VECTOR('',#18276,1.);+#18276 = DIRECTION('',(1.,0.));+#18277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18278 = ORIENTED_EDGE('',*,*,#18279,.F.);+#18279 = EDGE_CURVE('',#17454,#18252,#18280,.T.);+#18280 = SURFACE_CURVE('',#18281,(#18285,#18292),.PCURVE_S1.);+#18281 = LINE('',#18282,#18283);+#18282 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,-0.1));+#18283 = VECTOR('',#18284,1.);+#18284 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#18285 = PCURVE('',#17462,#18286);+#18286 = DEFINITIONAL_REPRESENTATION('',(#18287),#18291);+#18287 = LINE('',#18288,#18289);+#18288 = CARTESIAN_POINT('',(-0.594729450677,-0.700512759219));+#18289 = VECTOR('',#18290,1.);+#18290 = DIRECTION('',(0.90618313999,0.422885465342));+#18291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18292 = PCURVE('',#18293,#18298);+#18293 = PLANE('',#18294);+#18294 = AXIS2_PLACEMENT_3D('',#18295,#18296,#18297);+#18295 = CARTESIAN_POINT('',(-0.149999999976,8.999999999958E-02,0.));+#18296 = DIRECTION('',(-0.422885465348,0.906183139987,0.));+#18297 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#18298 = DEFINITIONAL_REPRESENTATION('',(#18299),#18303);+#18299 = LINE('',#18300,#18301);+#18300 = CARTESIAN_POINT('',(5.936554722648E-04,0.1));+#18301 = VECTOR('',#18302,1.);+#18302 = DIRECTION('',(1.,0.));+#18303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18304 = ADVANCED_FACE('',(#18305),#17474,.F.);+#18305 = FACE_BOUND('',#18306,.F.);+#18306 = EDGE_LOOP('',(#18307,#18337,#18358,#18359,#18382,#18405,#18433,+ #18461));+#18307 = ORIENTED_EDGE('',*,*,#18308,.F.);+#18308 = EDGE_CURVE('',#18309,#18311,#18313,.T.);+#18309 = VERTEX_POINT('',#18310);+#18310 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,0.));+#18311 = VERTEX_POINT('',#18312);+#18312 = CARTESIAN_POINT('',(-0.149462039396,-3.970874344617E-02,0.));+#18313 = SURFACE_CURVE('',#18314,(#18318,#18325),.PCURVE_S1.);+#18314 = LINE('',#18315,#18316);+#18315 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,0.));+#18316 = VECTOR('',#18317,1.);+#18317 = DIRECTION('',(0.,1.,0.));+#18318 = PCURVE('',#17474,#18319);+#18319 = DEFINITIONAL_REPRESENTATION('',(#18320),#18324);+#18320 = LINE('',#18321,#18322);+#18321 = CARTESIAN_POINT('',(0.345441613228,0.125));+#18322 = VECTOR('',#18323,1.);+#18323 = DIRECTION('',(1.,0.));+#18324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18325 = PCURVE('',#18326,#18331);+#18326 = PLANE('',#18327);+#18327 = AXIS2_PLACEMENT_3D('',#18328,#18329,#18330);+#18328 = CARTESIAN_POINT('',(0.445267411281,0.790763807489,0.));+#18329 = DIRECTION('',(0.,0.,1.));+#18330 = DIRECTION('',(1.,0.,-0.));+#18331 = DEFINITIONAL_REPRESENTATION('',(#18332),#18336);+#18332 = LINE('',#18333,#18334);+#18333 = CARTESIAN_POINT('',(-0.594729450677,-0.88101485576));+#18334 = VECTOR('',#18335,1.);+#18335 = DIRECTION('',(0.,1.));+#18336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18337 = ORIENTED_EDGE('',*,*,#18338,.T.);+#18338 = EDGE_CURVE('',#18309,#17452,#18339,.T.);+#18339 = SURFACE_CURVE('',#18340,(#18344,#18351),.PCURVE_S1.);+#18340 = LINE('',#18341,#18342);+#18341 = CARTESIAN_POINT('',(-0.149462039396,-9.025104827064E-02,0.));+#18342 = VECTOR('',#18343,1.);+#18343 = DIRECTION('',(0.,0.,-1.));+#18344 = PCURVE('',#17474,#18345);+#18345 = DEFINITIONAL_REPRESENTATION('',(#18346),#18350);+#18346 = LINE('',#18347,#18348);+#18347 = CARTESIAN_POINT('',(0.345441613228,0.125));+#18348 = VECTOR('',#18349,1.);+#18349 = DIRECTION('',(0.,-1.));+#18350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18351 = PCURVE('',#17502,#18352);+#18352 = DEFINITIONAL_REPRESENTATION('',(#18353),#18357);+#18353 = LINE('',#18354,#18355);+#18354 = CARTESIAN_POINT('',(8.217107131128E-02,0.));+#18355 = VECTOR('',#18356,1.);+#18356 = DIRECTION('',(0.,1.));+#18357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18358 = ORIENTED_EDGE('',*,*,#17451,.T.);+#18359 = ORIENTED_EDGE('',*,*,#18360,.F.);+#18360 = EDGE_CURVE('',#18361,#17454,#18363,.T.);+#18361 = VERTEX_POINT('',#18362);+#18362 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,0.));+#18363 = SURFACE_CURVE('',#18364,(#18368,#18375),.PCURVE_S1.);+#18364 = LINE('',#18365,#18366);+#18365 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,0.));+#18366 = VECTOR('',#18367,1.);+#18367 = DIRECTION('',(0.,0.,-1.));+#18368 = PCURVE('',#17474,#18369);+#18369 = DEFINITIONAL_REPRESENTATION('',(#18370),#18374);+#18370 = LINE('',#18371,#18372);+#18371 = CARTESIAN_POINT('',(0.525943709769,0.125));+#18372 = VECTOR('',#18373,1.);+#18373 = DIRECTION('',(0.,-1.));+#18374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18375 = PCURVE('',#18293,#18376);+#18376 = DEFINITIONAL_REPRESENTATION('',(#18377),#18381);+#18377 = LINE('',#18378,#18379);+#18378 = CARTESIAN_POINT('',(5.936554722648E-04,0.));+#18379 = VECTOR('',#18380,1.);+#18380 = DIRECTION('',(0.,1.));+#18381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18382 = ORIENTED_EDGE('',*,*,#18383,.F.);+#18383 = EDGE_CURVE('',#18384,#18361,#18386,.T.);+#18384 = VERTEX_POINT('',#18385);+#18385 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.));+#18386 = SURFACE_CURVE('',#18387,(#18391,#18398),.PCURVE_S1.);+#18387 = LINE('',#18388,#18389);+#18388 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.));+#18389 = VECTOR('',#18390,1.);+#18390 = DIRECTION('',(0.,1.,0.));+#18391 = PCURVE('',#17474,#18392);+#18392 = DEFINITIONAL_REPRESENTATION('',(#18393),#18397);+#18393 = LINE('',#18394,#18395);+#18394 = CARTESIAN_POINT('',(0.475983918055,0.125));+#18395 = VECTOR('',#18396,1.);+#18396 = DIRECTION('',(1.,0.));+#18397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18398 = PCURVE('',#18326,#18399);+#18399 = DEFINITIONAL_REPRESENTATION('',(#18400),#18404);+#18400 = LINE('',#18401,#18402);+#18401 = CARTESIAN_POINT('',(-0.594729450677,-0.750472550933));+#18402 = VECTOR('',#18403,1.);+#18403 = DIRECTION('',(0.,1.));+#18404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18405 = ORIENTED_EDGE('',*,*,#18406,.F.);+#18406 = EDGE_CURVE('',#18407,#18384,#18409,.T.);+#18407 = VERTEX_POINT('',#18408);+#18408 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.1));+#18409 = SURFACE_CURVE('',#18410,(#18414,#18421),.PCURVE_S1.);+#18410 = LINE('',#18411,#18412);+#18411 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.1));+#18412 = VECTOR('',#18413,1.);+#18413 = DIRECTION('',(0.,0.,-1.));+#18414 = PCURVE('',#17474,#18415);+#18415 = DEFINITIONAL_REPRESENTATION('',(#18416),#18420);+#18416 = LINE('',#18417,#18418);+#18417 = CARTESIAN_POINT('',(0.475983918055,0.225));+#18418 = VECTOR('',#18419,1.);+#18419 = DIRECTION('',(0.,-1.));+#18420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18421 = PCURVE('',#18422,#18427);+#18422 = PLANE('',#18423);+#18423 = AXIS2_PLACEMENT_3D('',#18424,#18425,#18426);+#18424 = CARTESIAN_POINT('',(-9.020335452078E-02,4.029125655649E-02,0.1)+ );+#18425 = DIRECTION('',(0.,-1.,0.));+#18426 = DIRECTION('',(-1.,0.,0.));+#18427 = DEFINITIONAL_REPRESENTATION('',(#18428),#18432);+#18428 = LINE('',#18429,#18430);+#18429 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18430 = VECTOR('',#18431,1.);+#18431 = DIRECTION('',(0.,1.));+#18432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18433 = ORIENTED_EDGE('',*,*,#18434,.T.);+#18434 = EDGE_CURVE('',#18407,#18435,#18437,.T.);+#18435 = VERTEX_POINT('',#18436);+#18436 = CARTESIAN_POINT('',(-0.149462039396,-3.970874344617E-02,0.1));+#18437 = SURFACE_CURVE('',#18438,(#18442,#18449),.PCURVE_S1.);+#18438 = LINE('',#18439,#18440);+#18439 = CARTESIAN_POINT('',(-0.149462039396,4.029125655649E-02,0.1));+#18440 = VECTOR('',#18441,1.);+#18441 = DIRECTION('',(0.,-1.,0.));+#18442 = PCURVE('',#17474,#18443);+#18443 = DEFINITIONAL_REPRESENTATION('',(#18444),#18448);+#18444 = LINE('',#18445,#18446);+#18445 = CARTESIAN_POINT('',(0.475983918055,0.225));+#18446 = VECTOR('',#18447,1.);+#18447 = DIRECTION('',(-1.,0.));+#18448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18449 = PCURVE('',#18450,#18455);+#18450 = PLANE('',#18451);+#18451 = AXIS2_PLACEMENT_3D('',#18452,#18453,#18454);+#18452 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18453 = DIRECTION('',(0.,0.,1.));+#18454 = DIRECTION('',(1.,0.,-0.));+#18455 = DEFINITIONAL_REPRESENTATION('',(#18456),#18460);+#18456 = LINE('',#18457,#18458);+#18457 = CARTESIAN_POINT('',(-0.687763226012,-0.775292602747));+#18458 = VECTOR('',#18459,1.);+#18459 = DIRECTION('',(0.,-1.));+#18460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18461 = ORIENTED_EDGE('',*,*,#18462,.T.);+#18462 = EDGE_CURVE('',#18435,#18311,#18463,.T.);+#18463 = SURFACE_CURVE('',#18464,(#18468,#18475),.PCURVE_S1.);+#18464 = LINE('',#18465,#18466);+#18465 = CARTESIAN_POINT('',(-0.149462039396,-3.970874344617E-02,0.1));+#18466 = VECTOR('',#18467,1.);+#18467 = DIRECTION('',(0.,0.,-1.));+#18468 = PCURVE('',#17474,#18469);+#18469 = DEFINITIONAL_REPRESENTATION('',(#18470),#18474);+#18470 = LINE('',#18471,#18472);+#18471 = CARTESIAN_POINT('',(0.395983918053,0.225));+#18472 = VECTOR('',#18473,1.);+#18473 = DIRECTION('',(0.,-1.));+#18474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18475 = PCURVE('',#18476,#18481);+#18476 = PLANE('',#18477);+#18477 = AXIS2_PLACEMENT_3D('',#18478,#18479,#18480);+#18478 = CARTESIAN_POINT('',(-0.22520335453,-3.970874344617E-02,0.1));+#18479 = DIRECTION('',(0.,1.,0.));+#18480 = DIRECTION('',(1.,0.,0.));+#18481 = DEFINITIONAL_REPRESENTATION('',(#18482),#18486);+#18482 = LINE('',#18483,#18484);+#18483 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#18484 = VECTOR('',#18485,1.);+#18485 = DIRECTION('',(0.,1.));+#18486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18487 = ADVANCED_FACE('',(#18488),#18155,.F.);+#18488 = FACE_BOUND('',#18489,.F.);+#18489 = EDGE_LOOP('',(#18490,#18515,#18536,#18537,#18560,#18583,#18611,+ #18639));+#18490 = ORIENTED_EDGE('',*,*,#18491,.F.);+#18491 = EDGE_CURVE('',#18492,#18494,#18496,.T.);+#18492 = VERTEX_POINT('',#18493);+#18493 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,0.));+#18494 = VERTEX_POINT('',#18495);+#18495 = CARTESIAN_POINT('',(-0.149462039396,0.460291256551,0.));+#18496 = SURFACE_CURVE('',#18497,(#18501,#18508),.PCURVE_S1.);+#18497 = LINE('',#18498,#18499);+#18498 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,0.));+#18499 = VECTOR('',#18500,1.);+#18500 = DIRECTION('',(0.,1.,0.));+#18501 = PCURVE('',#18155,#18502);+#18502 = DEFINITIONAL_REPRESENTATION('',(#18503),#18507);+#18503 = LINE('',#18504,#18505);+#18504 = CARTESIAN_POINT('',(0.84544161632,0.125));+#18505 = VECTOR('',#18506,1.);+#18506 = DIRECTION('',(1.,0.));+#18507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18508 = PCURVE('',#18326,#18509);+#18509 = DEFINITIONAL_REPRESENTATION('',(#18510),#18514);+#18510 = LINE('',#18511,#18512);+#18511 = CARTESIAN_POINT('',(-0.594729450677,-0.381014852668));+#18512 = VECTOR('',#18513,1.);+#18513 = DIRECTION('',(0.,1.));+#18514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18515 = ORIENTED_EDGE('',*,*,#18516,.F.);+#18516 = EDGE_CURVE('',#18140,#18492,#18517,.T.);+#18517 = SURFACE_CURVE('',#18518,(#18522,#18529),.PCURVE_S1.);+#18518 = LINE('',#18519,#18520);+#18519 = CARTESIAN_POINT('',(-0.149462039396,0.409748954821,-0.1));+#18520 = VECTOR('',#18521,1.);+#18521 = DIRECTION('',(0.,0.,1.));+#18522 = PCURVE('',#18155,#18523);+#18523 = DEFINITIONAL_REPRESENTATION('',(#18524),#18528);+#18524 = LINE('',#18525,#18526);+#18525 = CARTESIAN_POINT('',(0.84544161632,2.5E-02));+#18526 = VECTOR('',#18527,1.);+#18527 = DIRECTION('',(0.,1.));+#18528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18529 = PCURVE('',#18183,#18530);+#18530 = DEFINITIONAL_REPRESENTATION('',(#18531),#18535);+#18531 = LINE('',#18532,#18533);+#18532 = CARTESIAN_POINT('',(5.936481659258E-04,-0.1));+#18533 = VECTOR('',#18534,1.);+#18534 = DIRECTION('',(0.,1.));+#18535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18536 = ORIENTED_EDGE('',*,*,#18139,.T.);+#18537 = ORIENTED_EDGE('',*,*,#18538,.F.);+#18538 = EDGE_CURVE('',#18539,#18112,#18541,.T.);+#18539 = VERTEX_POINT('',#18540);+#18540 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,0.));+#18541 = SURFACE_CURVE('',#18542,(#18546,#18553),.PCURVE_S1.);+#18542 = LINE('',#18543,#18544);+#18543 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,0.));+#18544 = VECTOR('',#18545,1.);+#18545 = DIRECTION('',(0.,0.,-1.));+#18546 = PCURVE('',#18155,#18547);+#18547 = DEFINITIONAL_REPRESENTATION('',(#18548),#18552);+#18548 = LINE('',#18549,#18550);+#18549 = CARTESIAN_POINT('',(1.025943709769,0.125));+#18550 = VECTOR('',#18551,1.);+#18551 = DIRECTION('',(0.,-1.));+#18552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18553 = PCURVE('',#18127,#18554);+#18554 = DEFINITIONAL_REPRESENTATION('',(#18555),#18559);+#18555 = LINE('',#18556,#18557);+#18556 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#18557 = VECTOR('',#18558,1.);+#18558 = DIRECTION('',(0.,1.));+#18559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18560 = ORIENTED_EDGE('',*,*,#18561,.F.);+#18561 = EDGE_CURVE('',#18562,#18539,#18564,.T.);+#18562 = VERTEX_POINT('',#18563);+#18563 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.));+#18564 = SURFACE_CURVE('',#18565,(#18569,#18576),.PCURVE_S1.);+#18565 = LINE('',#18566,#18567);+#18566 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.));+#18567 = VECTOR('',#18568,1.);+#18568 = DIRECTION('',(0.,1.,0.));+#18569 = PCURVE('',#18155,#18570);+#18570 = DEFINITIONAL_REPRESENTATION('',(#18571),#18575);+#18571 = LINE('',#18572,#18573);+#18572 = CARTESIAN_POINT('',(0.975983918053,0.125));+#18573 = VECTOR('',#18574,1.);+#18574 = DIRECTION('',(1.,0.));+#18575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18576 = PCURVE('',#18326,#18577);+#18577 = DEFINITIONAL_REPRESENTATION('',(#18578),#18582);+#18578 = LINE('',#18579,#18580);+#18579 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550935));+#18580 = VECTOR('',#18581,1.);+#18581 = DIRECTION('',(0.,1.));+#18582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18583 = ORIENTED_EDGE('',*,*,#18584,.F.);+#18584 = EDGE_CURVE('',#18585,#18562,#18587,.T.);+#18585 = VERTEX_POINT('',#18586);+#18586 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.1));+#18587 = SURFACE_CURVE('',#18588,(#18592,#18599),.PCURVE_S1.);+#18588 = LINE('',#18589,#18590);+#18589 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.1));+#18590 = VECTOR('',#18591,1.);+#18591 = DIRECTION('',(0.,0.,-1.));+#18592 = PCURVE('',#18155,#18593);+#18593 = DEFINITIONAL_REPRESENTATION('',(#18594),#18598);+#18594 = LINE('',#18595,#18596);+#18595 = CARTESIAN_POINT('',(0.975983918053,0.225));+#18596 = VECTOR('',#18597,1.);+#18597 = DIRECTION('',(0.,-1.));+#18598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18599 = PCURVE('',#18600,#18605);+#18600 = PLANE('',#18601);+#18601 = AXIS2_PLACEMENT_3D('',#18602,#18603,#18604);+#18602 = CARTESIAN_POINT('',(-9.020335452078E-02,0.540291256554,0.1));+#18603 = DIRECTION('',(0.,-1.,0.));+#18604 = DIRECTION('',(-1.,0.,0.));+#18605 = DEFINITIONAL_REPRESENTATION('',(#18606),#18610);+#18606 = LINE('',#18607,#18608);+#18607 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18608 = VECTOR('',#18609,1.);+#18609 = DIRECTION('',(0.,1.));+#18610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18611 = ORIENTED_EDGE('',*,*,#18612,.T.);+#18612 = EDGE_CURVE('',#18585,#18613,#18615,.T.);+#18613 = VERTEX_POINT('',#18614);+#18614 = CARTESIAN_POINT('',(-0.149462039396,0.460291256551,0.1));+#18615 = SURFACE_CURVE('',#18616,(#18620,#18627),.PCURVE_S1.);+#18616 = LINE('',#18617,#18618);+#18617 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.1));+#18618 = VECTOR('',#18619,1.);+#18619 = DIRECTION('',(0.,-1.,0.));+#18620 = PCURVE('',#18155,#18621);+#18621 = DEFINITIONAL_REPRESENTATION('',(#18622),#18626);+#18622 = LINE('',#18623,#18624);+#18623 = CARTESIAN_POINT('',(0.975983918053,0.225));+#18624 = VECTOR('',#18625,1.);+#18625 = DIRECTION('',(-1.,0.));+#18626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18627 = PCURVE('',#18628,#18633);+#18628 = PLANE('',#18629);+#18629 = AXIS2_PLACEMENT_3D('',#18630,#18631,#18632);+#18630 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18631 = DIRECTION('',(0.,0.,1.));+#18632 = DIRECTION('',(1.,0.,-0.));+#18633 = DEFINITIONAL_REPRESENTATION('',(#18634),#18638);+#18634 = LINE('',#18635,#18636);+#18635 = CARTESIAN_POINT('',(-0.687763226012,-0.275292602749));+#18636 = VECTOR('',#18637,1.);+#18637 = DIRECTION('',(0.,-1.));+#18638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18639 = ORIENTED_EDGE('',*,*,#18640,.T.);+#18640 = EDGE_CURVE('',#18613,#18494,#18641,.T.);+#18641 = SURFACE_CURVE('',#18642,(#18646,#18653),.PCURVE_S1.);+#18642 = LINE('',#18643,#18644);+#18643 = CARTESIAN_POINT('',(-0.149462039396,0.460291256551,0.1));+#18644 = VECTOR('',#18645,1.);+#18645 = DIRECTION('',(0.,0.,-1.));+#18646 = PCURVE('',#18155,#18647);+#18647 = DEFINITIONAL_REPRESENTATION('',(#18648),#18652);+#18648 = LINE('',#18649,#18650);+#18649 = CARTESIAN_POINT('',(0.89598391805,0.225));+#18650 = VECTOR('',#18651,1.);+#18651 = DIRECTION('',(0.,-1.));+#18652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18653 = PCURVE('',#18654,#18659);+#18654 = PLANE('',#18655);+#18655 = AXIS2_PLACEMENT_3D('',#18656,#18657,#18658);+#18656 = CARTESIAN_POINT('',(-0.22520335453,0.460291256551,0.1));+#18657 = DIRECTION('',(0.,1.,0.));+#18658 = DIRECTION('',(1.,0.,0.));+#18659 = DEFINITIONAL_REPRESENTATION('',(#18660),#18664);+#18660 = LINE('',#18661,#18662);+#18661 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#18662 = VECTOR('',#18663,1.);+#18663 = DIRECTION('',(0.,1.));+#18664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18665 = ADVANCED_FACE('',(#18666),#17987,.F.);+#18666 = FACE_BOUND('',#18667,.F.);+#18667 = EDGE_LOOP('',(#18668,#18693,#18714,#18715,#18738,#18761,#18789,+ #18817));+#18668 = ORIENTED_EDGE('',*,*,#18669,.F.);+#18669 = EDGE_CURVE('',#18670,#18672,#18674,.T.);+#18670 = VERTEX_POINT('',#18671);+#18671 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,0.));+#18672 = VERTEX_POINT('',#18673);+#18673 = CARTESIAN_POINT('',(-0.149462039396,0.960291256553,0.));+#18674 = SURFACE_CURVE('',#18675,(#18679,#18686),.PCURVE_S1.);+#18675 = LINE('',#18676,#18677);+#18676 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,0.));+#18677 = VECTOR('',#18678,1.);+#18678 = DIRECTION('',(0.,1.,0.));+#18679 = PCURVE('',#17987,#18680);+#18680 = DEFINITIONAL_REPRESENTATION('',(#18681),#18685);+#18681 = LINE('',#18682,#18683);+#18682 = CARTESIAN_POINT('',(1.345441613229,0.125));+#18683 = VECTOR('',#18684,1.);+#18684 = DIRECTION('',(1.,0.));+#18685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18686 = PCURVE('',#18326,#18687);+#18687 = DEFINITIONAL_REPRESENTATION('',(#18688),#18692);+#18688 = LINE('',#18689,#18690);+#18689 = CARTESIAN_POINT('',(-0.594729450677,0.118985144241));+#18690 = VECTOR('',#18691,1.);+#18691 = DIRECTION('',(0.,1.));+#18692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18693 = ORIENTED_EDGE('',*,*,#18694,.T.);+#18694 = EDGE_CURVE('',#18670,#17972,#18695,.T.);+#18695 = SURFACE_CURVE('',#18696,(#18700,#18707),.PCURVE_S1.);+#18696 = LINE('',#18697,#18698);+#18697 = CARTESIAN_POINT('',(-0.149462039396,0.90974895173,0.));+#18698 = VECTOR('',#18699,1.);+#18699 = DIRECTION('',(0.,0.,-1.));+#18700 = PCURVE('',#17987,#18701);+#18701 = DEFINITIONAL_REPRESENTATION('',(#18702),#18706);+#18702 = LINE('',#18703,#18704);+#18703 = CARTESIAN_POINT('',(1.345441613229,0.125));+#18704 = VECTOR('',#18705,1.);+#18705 = DIRECTION('',(0.,-1.));+#18706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18707 = PCURVE('',#18015,#18708);+#18708 = DEFINITIONAL_REPRESENTATION('',(#18709),#18713);+#18709 = LINE('',#18710,#18711);+#18710 = CARTESIAN_POINT('',(8.217107131155E-02,0.));+#18711 = VECTOR('',#18712,1.);+#18712 = DIRECTION('',(0.,1.));+#18713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18714 = ORIENTED_EDGE('',*,*,#17971,.T.);+#18715 = ORIENTED_EDGE('',*,*,#18716,.F.);+#18716 = EDGE_CURVE('',#18717,#17944,#18719,.T.);+#18717 = VERTEX_POINT('',#18718);+#18718 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,0.));+#18719 = SURFACE_CURVE('',#18720,(#18724,#18731),.PCURVE_S1.);+#18720 = LINE('',#18721,#18722);+#18721 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,0.));+#18722 = VECTOR('',#18723,1.);+#18723 = DIRECTION('',(0.,0.,-1.));+#18724 = PCURVE('',#17987,#18725);+#18725 = DEFINITIONAL_REPRESENTATION('',(#18726),#18730);+#18726 = LINE('',#18727,#18728);+#18727 = CARTESIAN_POINT('',(1.525943709769,0.125));+#18728 = VECTOR('',#18729,1.);+#18729 = DIRECTION('',(0.,-1.));+#18730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18731 = PCURVE('',#17959,#18732);+#18732 = DEFINITIONAL_REPRESENTATION('',(#18733),#18737);+#18733 = LINE('',#18734,#18735);+#18734 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#18735 = VECTOR('',#18736,1.);+#18736 = DIRECTION('',(0.,1.));+#18737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18738 = ORIENTED_EDGE('',*,*,#18739,.F.);+#18739 = EDGE_CURVE('',#18740,#18717,#18742,.T.);+#18740 = VERTEX_POINT('',#18741);+#18741 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.));+#18742 = SURFACE_CURVE('',#18743,(#18747,#18754),.PCURVE_S1.);+#18743 = LINE('',#18744,#18745);+#18744 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.));+#18745 = VECTOR('',#18746,1.);+#18746 = DIRECTION('',(0.,1.,0.));+#18747 = PCURVE('',#17987,#18748);+#18748 = DEFINITIONAL_REPRESENTATION('',(#18749),#18753);+#18749 = LINE('',#18750,#18751);+#18750 = CARTESIAN_POINT('',(1.47598391805,0.125));+#18751 = VECTOR('',#18752,1.);+#18752 = DIRECTION('',(1.,0.));+#18753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18754 = PCURVE('',#18326,#18755);+#18755 = DEFINITIONAL_REPRESENTATION('',(#18756),#18760);+#18756 = LINE('',#18757,#18758);+#18757 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#18758 = VECTOR('',#18759,1.);+#18759 = DIRECTION('',(0.,1.));+#18760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18761 = ORIENTED_EDGE('',*,*,#18762,.F.);+#18762 = EDGE_CURVE('',#18763,#18740,#18765,.T.);+#18763 = VERTEX_POINT('',#18764);+#18764 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.1));+#18765 = SURFACE_CURVE('',#18766,(#18770,#18777),.PCURVE_S1.);+#18766 = LINE('',#18767,#18768);+#18767 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.1));+#18768 = VECTOR('',#18769,1.);+#18769 = DIRECTION('',(0.,0.,-1.));+#18770 = PCURVE('',#17987,#18771);+#18771 = DEFINITIONAL_REPRESENTATION('',(#18772),#18776);+#18772 = LINE('',#18773,#18774);+#18773 = CARTESIAN_POINT('',(1.47598391805,0.225));+#18774 = VECTOR('',#18775,1.);+#18775 = DIRECTION('',(0.,-1.));+#18776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18777 = PCURVE('',#18778,#18783);+#18778 = PLANE('',#18779);+#18779 = AXIS2_PLACEMENT_3D('',#18780,#18781,#18782);+#18780 = CARTESIAN_POINT('',(-9.020335452078E-02,1.040291256551,0.1));+#18781 = DIRECTION('',(0.,-1.,0.));+#18782 = DIRECTION('',(-1.,0.,0.));+#18783 = DEFINITIONAL_REPRESENTATION('',(#18784),#18788);+#18784 = LINE('',#18785,#18786);+#18785 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18786 = VECTOR('',#18787,1.);+#18787 = DIRECTION('',(0.,1.));+#18788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18789 = ORIENTED_EDGE('',*,*,#18790,.T.);+#18790 = EDGE_CURVE('',#18763,#18791,#18793,.T.);+#18791 = VERTEX_POINT('',#18792);+#18792 = CARTESIAN_POINT('',(-0.149462039396,0.960291256553,0.1));+#18793 = SURFACE_CURVE('',#18794,(#18798,#18805),.PCURVE_S1.);+#18794 = LINE('',#18795,#18796);+#18795 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.1));+#18796 = VECTOR('',#18797,1.);+#18797 = DIRECTION('',(0.,-1.,0.));+#18798 = PCURVE('',#17987,#18799);+#18799 = DEFINITIONAL_REPRESENTATION('',(#18800),#18804);+#18800 = LINE('',#18801,#18802);+#18801 = CARTESIAN_POINT('',(1.47598391805,0.225));+#18802 = VECTOR('',#18803,1.);+#18803 = DIRECTION('',(-1.,0.));+#18804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18805 = PCURVE('',#18806,#18811);+#18806 = PLANE('',#18807);+#18807 = AXIS2_PLACEMENT_3D('',#18808,#18809,#18810);+#18808 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18809 = DIRECTION('',(0.,0.,1.));+#18810 = DIRECTION('',(1.,0.,-0.));+#18811 = DEFINITIONAL_REPRESENTATION('',(#18812),#18816);+#18812 = LINE('',#18813,#18814);+#18813 = CARTESIAN_POINT('',(-0.687763226012,0.224707397248));+#18814 = VECTOR('',#18815,1.);+#18815 = DIRECTION('',(0.,-1.));+#18816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18817 = ORIENTED_EDGE('',*,*,#18818,.T.);+#18818 = EDGE_CURVE('',#18791,#18672,#18819,.T.);+#18819 = SURFACE_CURVE('',#18820,(#18824,#18831),.PCURVE_S1.);+#18820 = LINE('',#18821,#18822);+#18821 = CARTESIAN_POINT('',(-0.149462039396,0.960291256553,0.1));+#18822 = VECTOR('',#18823,1.);+#18823 = DIRECTION('',(0.,0.,-1.));+#18824 = PCURVE('',#17987,#18825);+#18825 = DEFINITIONAL_REPRESENTATION('',(#18826),#18830);+#18826 = LINE('',#18827,#18828);+#18827 = CARTESIAN_POINT('',(1.395983918052,0.225));+#18828 = VECTOR('',#18829,1.);+#18829 = DIRECTION('',(0.,-1.));+#18830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18831 = PCURVE('',#18832,#18837);+#18832 = PLANE('',#18833);+#18833 = AXIS2_PLACEMENT_3D('',#18834,#18835,#18836);+#18834 = CARTESIAN_POINT('',(-0.22520335453,0.960291256553,0.1));+#18835 = DIRECTION('',(0.,1.,0.));+#18836 = DIRECTION('',(1.,0.,0.));+#18837 = DEFINITIONAL_REPRESENTATION('',(#18838),#18842);+#18838 = LINE('',#18839,#18840);+#18839 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#18840 = VECTOR('',#18841,1.);+#18841 = DIRECTION('',(0.,1.));+#18842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18843 = ADVANCED_FACE('',(#18844),#17819,.F.);+#18844 = FACE_BOUND('',#18845,.F.);+#18845 = EDGE_LOOP('',(#18846,#18871,#18892,#18893,#18916,#18939,#18967,+ #18995));+#18846 = ORIENTED_EDGE('',*,*,#18847,.F.);+#18847 = EDGE_CURVE('',#18848,#18850,#18852,.T.);+#18848 = VERTEX_POINT('',#18849);+#18849 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,0.));+#18850 = VERTEX_POINT('',#18851);+#18851 = CARTESIAN_POINT('',(-0.149462039396,1.460291256555,0.));+#18852 = SURFACE_CURVE('',#18853,(#18857,#18864),.PCURVE_S1.);+#18853 = LINE('',#18854,#18855);+#18854 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,0.));+#18855 = VECTOR('',#18856,1.);+#18856 = DIRECTION('',(0.,1.,0.));+#18857 = PCURVE('',#17819,#18858);+#18858 = DEFINITIONAL_REPRESENTATION('',(#18859),#18863);+#18859 = LINE('',#18860,#18861);+#18860 = CARTESIAN_POINT('',(1.845441613228,0.125));+#18861 = VECTOR('',#18862,1.);+#18862 = DIRECTION('',(1.,0.));+#18863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18864 = PCURVE('',#18326,#18865);+#18865 = DEFINITIONAL_REPRESENTATION('',(#18866),#18870);+#18866 = LINE('',#18867,#18868);+#18867 = CARTESIAN_POINT('',(-0.594729450677,0.61898514424));+#18868 = VECTOR('',#18869,1.);+#18869 = DIRECTION('',(0.,1.));+#18870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18871 = ORIENTED_EDGE('',*,*,#18872,.T.);+#18872 = EDGE_CURVE('',#18848,#17804,#18873,.T.);+#18873 = SURFACE_CURVE('',#18874,(#18878,#18885),.PCURVE_S1.);+#18874 = LINE('',#18875,#18876);+#18875 = CARTESIAN_POINT('',(-0.149462039396,1.409748951729,0.));+#18876 = VECTOR('',#18877,1.);+#18877 = DIRECTION('',(0.,0.,-1.));+#18878 = PCURVE('',#17819,#18879);+#18879 = DEFINITIONAL_REPRESENTATION('',(#18880),#18884);+#18880 = LINE('',#18881,#18882);+#18881 = CARTESIAN_POINT('',(1.845441613228,0.125));+#18882 = VECTOR('',#18883,1.);+#18883 = DIRECTION('',(0.,-1.));+#18884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18885 = PCURVE('',#17847,#18886);+#18886 = DEFINITIONAL_REPRESENTATION('',(#18887),#18891);+#18887 = LINE('',#18888,#18889);+#18888 = CARTESIAN_POINT('',(8.217107131113E-02,0.));+#18889 = VECTOR('',#18890,1.);+#18890 = DIRECTION('',(0.,1.));+#18891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18892 = ORIENTED_EDGE('',*,*,#17803,.T.);+#18893 = ORIENTED_EDGE('',*,*,#18894,.F.);+#18894 = EDGE_CURVE('',#18895,#17776,#18897,.T.);+#18895 = VERTEX_POINT('',#18896);+#18896 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,0.));+#18897 = SURFACE_CURVE('',#18898,(#18902,#18909),.PCURVE_S1.);+#18898 = LINE('',#18899,#18900);+#18899 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,0.));+#18900 = VECTOR('',#18901,1.);+#18901 = DIRECTION('',(0.,0.,-1.));+#18902 = PCURVE('',#17819,#18903);+#18903 = DEFINITIONAL_REPRESENTATION('',(#18904),#18908);+#18904 = LINE('',#18905,#18906);+#18905 = CARTESIAN_POINT('',(2.025943709769,0.125));+#18906 = VECTOR('',#18907,1.);+#18907 = DIRECTION('',(0.,-1.));+#18908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18909 = PCURVE('',#17791,#18910);+#18910 = DEFINITIONAL_REPRESENTATION('',(#18911),#18915);+#18911 = LINE('',#18912,#18913);+#18912 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#18913 = VECTOR('',#18914,1.);+#18914 = DIRECTION('',(0.,1.));+#18915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18916 = ORIENTED_EDGE('',*,*,#18917,.F.);+#18917 = EDGE_CURVE('',#18918,#18895,#18920,.T.);+#18918 = VERTEX_POINT('',#18919);+#18919 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.));+#18920 = SURFACE_CURVE('',#18921,(#18925,#18932),.PCURVE_S1.);+#18921 = LINE('',#18922,#18923);+#18922 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.));+#18923 = VECTOR('',#18924,1.);+#18924 = DIRECTION('',(0.,1.,0.));+#18925 = PCURVE('',#17819,#18926);+#18926 = DEFINITIONAL_REPRESENTATION('',(#18927),#18931);+#18927 = LINE('',#18928,#18929);+#18928 = CARTESIAN_POINT('',(1.975983918052,0.125));+#18929 = VECTOR('',#18930,1.);+#18930 = DIRECTION('',(1.,0.));+#18931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18932 = PCURVE('',#18326,#18933);+#18933 = DEFINITIONAL_REPRESENTATION('',(#18934),#18938);+#18934 = LINE('',#18935,#18936);+#18935 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#18936 = VECTOR('',#18937,1.);+#18937 = DIRECTION('',(0.,1.));+#18938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18939 = ORIENTED_EDGE('',*,*,#18940,.F.);+#18940 = EDGE_CURVE('',#18941,#18918,#18943,.T.);+#18941 = VERTEX_POINT('',#18942);+#18942 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.1));+#18943 = SURFACE_CURVE('',#18944,(#18948,#18955),.PCURVE_S1.);+#18944 = LINE('',#18945,#18946);+#18945 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.1));+#18946 = VECTOR('',#18947,1.);+#18947 = DIRECTION('',(0.,0.,-1.));+#18948 = PCURVE('',#17819,#18949);+#18949 = DEFINITIONAL_REPRESENTATION('',(#18950),#18954);+#18950 = LINE('',#18951,#18952);+#18951 = CARTESIAN_POINT('',(1.975983918052,0.225));+#18952 = VECTOR('',#18953,1.);+#18953 = DIRECTION('',(0.,-1.));+#18954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18955 = PCURVE('',#18956,#18961);+#18956 = PLANE('',#18957);+#18957 = AXIS2_PLACEMENT_3D('',#18958,#18959,#18960);+#18958 = CARTESIAN_POINT('',(-9.020335452078E-02,1.540291256553,0.1));+#18959 = DIRECTION('',(0.,-1.,0.));+#18960 = DIRECTION('',(-1.,0.,0.));+#18961 = DEFINITIONAL_REPRESENTATION('',(#18962),#18966);+#18962 = LINE('',#18963,#18964);+#18963 = CARTESIAN_POINT('',(5.925868487522E-02,0.));+#18964 = VECTOR('',#18965,1.);+#18965 = DIRECTION('',(0.,1.));+#18966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18967 = ORIENTED_EDGE('',*,*,#18968,.T.);+#18968 = EDGE_CURVE('',#18941,#18969,#18971,.T.);+#18969 = VERTEX_POINT('',#18970);+#18970 = CARTESIAN_POINT('',(-0.149462039396,1.460291256555,0.1));+#18971 = SURFACE_CURVE('',#18972,(#18976,#18983),.PCURVE_S1.);+#18972 = LINE('',#18973,#18974);+#18973 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.1));+#18974 = VECTOR('',#18975,1.);+#18975 = DIRECTION('',(0.,-1.,0.));+#18976 = PCURVE('',#17819,#18977);+#18977 = DEFINITIONAL_REPRESENTATION('',(#18978),#18982);+#18978 = LINE('',#18979,#18980);+#18979 = CARTESIAN_POINT('',(1.975983918052,0.225));+#18980 = VECTOR('',#18981,1.);+#18981 = DIRECTION('',(-1.,0.));+#18982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18983 = PCURVE('',#18984,#18989);+#18984 = PLANE('',#18985);+#18985 = AXIS2_PLACEMENT_3D('',#18986,#18987,#18988);+#18986 = CARTESIAN_POINT('',(0.538301186616,0.815583859303,0.1));+#18987 = DIRECTION('',(0.,0.,1.));+#18988 = DIRECTION('',(1.,0.,-0.));+#18989 = DEFINITIONAL_REPRESENTATION('',(#18990),#18994);+#18990 = LINE('',#18991,#18992);+#18991 = CARTESIAN_POINT('',(-0.687763226012,0.72470739725));+#18992 = VECTOR('',#18993,1.);+#18993 = DIRECTION('',(0.,-1.));+#18994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18995 = ORIENTED_EDGE('',*,*,#18996,.T.);+#18996 = EDGE_CURVE('',#18969,#18850,#18997,.T.);+#18997 = SURFACE_CURVE('',#18998,(#19002,#19009),.PCURVE_S1.);+#18998 = LINE('',#18999,#19000);+#18999 = CARTESIAN_POINT('',(-0.149462039396,1.460291256555,0.1));+#19000 = VECTOR('',#19001,1.);+#19001 = DIRECTION('',(0.,0.,-1.));+#19002 = PCURVE('',#17819,#19003);+#19003 = DEFINITIONAL_REPRESENTATION('',(#19004),#19008);+#19004 = LINE('',#19005,#19006);+#19005 = CARTESIAN_POINT('',(1.895983918054,0.225));+#19006 = VECTOR('',#19007,1.);+#19007 = DIRECTION('',(0.,-1.));+#19008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19009 = PCURVE('',#19010,#19015);+#19010 = PLANE('',#19011);+#19011 = AXIS2_PLACEMENT_3D('',#19012,#19013,#19014);+#19012 = CARTESIAN_POINT('',(-0.22520335453,1.460291256555,0.1));+#19013 = DIRECTION('',(0.,1.,0.));+#19014 = DIRECTION('',(1.,0.,0.));+#19015 = DEFINITIONAL_REPRESENTATION('',(#19016),#19020);+#19016 = LINE('',#19017,#19018);+#19017 = CARTESIAN_POINT('',(7.5741315134E-02,0.));+#19018 = VECTOR('',#19019,1.);+#19019 = DIRECTION('',(0.,1.));+#19020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19021 = ADVANCED_FACE('',(#19022),#18326,.T.);+#19022 = FACE_BOUND('',#19023,.F.);+#19023 = EDGE_LOOP('',(#19024,#19025,#19048,#19076,#19097,#19098,#19121,+ #19144,#19167,#19190,#19211,#19212,#19235,#19263,#19284,#19285,+ #19308,#19331,#19354,#19377,#19398,#19399,#19422,#19450,#19471,+ #19472,#19495,#19518,#19541,#19564,#19585,#19586,#19609,#19637,+ #19658,#19659,#19682,#19705,#19728,#19751,#19778,#19801,#19829,+ #19852,#19875,#19898));+#19024 = ORIENTED_EDGE('',*,*,#18308,.T.);+#19025 = ORIENTED_EDGE('',*,*,#19026,.F.);+#19026 = EDGE_CURVE('',#19027,#18311,#19029,.T.);+#19027 = VERTEX_POINT('',#19028);+#19028 = CARTESIAN_POINT('',(-0.106284942226,-3.970874344617E-02,0.));+#19029 = SURFACE_CURVE('',#19030,(#19034,#19041),.PCURVE_S1.);+#19030 = LINE('',#19031,#19032);+#19031 = CARTESIAN_POINT('',(-0.106284942226,-3.970874344617E-02,0.));+#19032 = VECTOR('',#19033,1.);+#19033 = DIRECTION('',(-1.,0.,0.));+#19034 = PCURVE('',#18326,#19035);+#19035 = DEFINITIONAL_REPRESENTATION('',(#19036),#19040);+#19036 = LINE('',#19037,#19038);+#19037 = CARTESIAN_POINT('',(-0.551552353507,-0.830472550935));+#19038 = VECTOR('',#19039,1.);+#19039 = DIRECTION('',(-1.,0.));+#19040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19041 = PCURVE('',#18476,#19042);+#19042 = DEFINITIONAL_REPRESENTATION('',(#19043),#19047);+#19043 = LINE('',#19044,#19045);+#19044 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19045 = VECTOR('',#19046,1.);+#19046 = DIRECTION('',(-1.,0.));+#19047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19048 = ORIENTED_EDGE('',*,*,#19049,.F.);+#19049 = EDGE_CURVE('',#19050,#19027,#19052,.T.);+#19050 = VERTEX_POINT('',#19051);+#19051 = CARTESIAN_POINT('',(-0.106284942226,4.029125655649E-02,0.));+#19052 = SURFACE_CURVE('',#19053,(#19057,#19064),.PCURVE_S1.);+#19053 = LINE('',#19054,#19055);+#19054 = CARTESIAN_POINT('',(-0.106284942226,4.029125655649E-02,0.));+#19055 = VECTOR('',#19056,1.);+#19056 = DIRECTION('',(0.,-1.,0.));+#19057 = PCURVE('',#18326,#19058);+#19058 = DEFINITIONAL_REPRESENTATION('',(#19059),#19063);+#19059 = LINE('',#19060,#19061);+#19060 = CARTESIAN_POINT('',(-0.551552353507,-0.750472550933));+#19061 = VECTOR('',#19062,1.);+#19062 = DIRECTION('',(0.,-1.));+#19063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19064 = PCURVE('',#19065,#19070);+#19065 = PLANE('',#19066);+#19066 = AXIS2_PLACEMENT_3D('',#19067,#19068,#19069);+#19067 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19068 = DIRECTION('',(-1.,0.,0.));+#19069 = DIRECTION('',(0.,-1.,0.));+#19070 = DEFINITIONAL_REPRESENTATION('',(#19071),#19075);+#19071 = LINE('',#19072,#19073);+#19072 = CARTESIAN_POINT('',(2.013750127431,-0.1));+#19073 = VECTOR('',#19074,1.);+#19074 = DIRECTION('',(1.,0.));+#19075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19076 = ORIENTED_EDGE('',*,*,#19077,.T.);+#19077 = EDGE_CURVE('',#19050,#18384,#19078,.T.);+#19078 = SURFACE_CURVE('',#19079,(#19083,#19090),.PCURVE_S1.);+#19079 = LINE('',#19080,#19081);+#19080 = CARTESIAN_POINT('',(-0.106284942226,4.029125655649E-02,0.));+#19081 = VECTOR('',#19082,1.);+#19082 = DIRECTION('',(-1.,0.,0.));+#19083 = PCURVE('',#18326,#19084);+#19084 = DEFINITIONAL_REPRESENTATION('',(#19085),#19089);+#19085 = LINE('',#19086,#19087);+#19086 = CARTESIAN_POINT('',(-0.551552353507,-0.750472550933));+#19087 = VECTOR('',#19088,1.);+#19088 = DIRECTION('',(-1.,0.));+#19089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19090 = PCURVE('',#18422,#19091);+#19091 = DEFINITIONAL_REPRESENTATION('',(#19092),#19096);+#19092 = LINE('',#19093,#19094);+#19093 = CARTESIAN_POINT('',(1.608158770522E-02,0.1));+#19094 = VECTOR('',#19095,1.);+#19095 = DIRECTION('',(1.,0.));+#19096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19097 = ORIENTED_EDGE('',*,*,#18383,.T.);+#19098 = ORIENTED_EDGE('',*,*,#19099,.T.);+#19099 = EDGE_CURVE('',#18361,#19100,#19102,.T.);+#19100 = VERTEX_POINT('',#19101);+#19101 = CARTESIAN_POINT('',(-7.499999998255E-02,0.124999999998,0.));+#19102 = SURFACE_CURVE('',#19103,(#19107,#19114),.PCURVE_S1.);+#19103 = LINE('',#19104,#19105);+#19104 = CARTESIAN_POINT('',(-0.149462039396,9.025104827007E-02,0.));+#19105 = VECTOR('',#19106,1.);+#19106 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#19107 = PCURVE('',#18326,#19108);+#19108 = DEFINITIONAL_REPRESENTATION('',(#19109),#19113);+#19109 = LINE('',#19110,#19111);+#19110 = CARTESIAN_POINT('',(-0.594729450677,-0.700512759219));+#19111 = VECTOR('',#19112,1.);+#19112 = DIRECTION('',(0.906183139987,0.422885465348));+#19113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19114 = PCURVE('',#18293,#19115);+#19115 = DEFINITIONAL_REPRESENTATION('',(#19116),#19120);+#19116 = LINE('',#19117,#19118);+#19117 = CARTESIAN_POINT('',(5.936554722648E-04,0.));+#19118 = VECTOR('',#19119,1.);+#19119 = DIRECTION('',(1.,0.));+#19120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19121 = ORIENTED_EDGE('',*,*,#19122,.F.);+#19122 = EDGE_CURVE('',#19123,#19100,#19125,.T.);+#19123 = VERTEX_POINT('',#19124);+#19124 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999998,0.));+#19125 = SURFACE_CURVE('',#19126,(#19130,#19137),.PCURVE_S1.);+#19126 = LINE('',#19127,#19128);+#19127 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999998,0.));+#19128 = VECTOR('',#19129,1.);+#19129 = DIRECTION('',(-1.,0.,0.));+#19130 = PCURVE('',#18326,#19131);+#19131 = DEFINITIONAL_REPRESENTATION('',(#19132),#19136);+#19132 = LINE('',#19133,#19134);+#19133 = CARTESIAN_POINT('',(-0.395267411253,-0.665763807491));+#19134 = VECTOR('',#19135,1.);+#19135 = DIRECTION('',(-1.,0.));+#19136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19137 = PCURVE('',#18267,#19138);+#19138 = DEFINITIONAL_REPRESENTATION('',(#19139),#19143);+#19139 = LINE('',#19140,#19141);+#19140 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19141 = VECTOR('',#19142,1.);+#19142 = DIRECTION('',(1.,0.));+#19143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19144 = ORIENTED_EDGE('',*,*,#19145,.T.);+#19145 = EDGE_CURVE('',#19123,#19146,#19148,.T.);+#19146 = VERTEX_POINT('',#19147);+#19147 = CARTESIAN_POINT('',(5.000000002838E-02,0.375000000004,0.));+#19148 = SURFACE_CURVE('',#19149,(#19153,#19160),.PCURVE_S1.);+#19149 = LINE('',#19150,#19151);+#19150 = CARTESIAN_POINT('',(5.000000002838E-02,0.124999999998,0.));+#19151 = VECTOR('',#19152,1.);+#19152 = DIRECTION('',(0.,1.,0.));+#19153 = PCURVE('',#18326,#19154);+#19154 = DEFINITIONAL_REPRESENTATION('',(#19155),#19159);+#19155 = LINE('',#19156,#19157);+#19156 = CARTESIAN_POINT('',(-0.395267411253,-0.665763807491));+#19157 = VECTOR('',#19158,1.);+#19158 = DIRECTION('',(0.,1.));+#19159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19160 = PCURVE('',#18239,#19161);+#19161 = DEFINITIONAL_REPRESENTATION('',(#19162),#19166);+#19162 = LINE('',#19163,#19164);+#19163 = CARTESIAN_POINT('',(-1.999997389923E-12,0.));+#19164 = VECTOR('',#19165,1.);+#19165 = DIRECTION('',(1.,0.));+#19166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19167 = ORIENTED_EDGE('',*,*,#19168,.F.);+#19168 = EDGE_CURVE('',#19169,#19146,#19171,.T.);+#19169 = VERTEX_POINT('',#19170);+#19170 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#19171 = SURFACE_CURVE('',#19172,(#19176,#19183),.PCURVE_S1.);+#19172 = LINE('',#19173,#19174);+#19173 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#19174 = VECTOR('',#19175,1.);+#19175 = DIRECTION('',(1.,0.,0.));+#19176 = PCURVE('',#18326,#19177);+#19177 = DEFINITIONAL_REPRESENTATION('',(#19178),#19182);+#19178 = LINE('',#19179,#19180);+#19179 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807485));+#19180 = VECTOR('',#19181,1.);+#19181 = DIRECTION('',(1.,0.));+#19182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19183 = PCURVE('',#18211,#19184);+#19184 = DEFINITIONAL_REPRESENTATION('',(#19185),#19189);+#19185 = LINE('',#19186,#19187);+#19186 = CARTESIAN_POINT('',(0.,0.));+#19187 = VECTOR('',#19188,1.);+#19188 = DIRECTION('',(1.,0.));+#19189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19190 = ORIENTED_EDGE('',*,*,#19191,.T.);+#19191 = EDGE_CURVE('',#19169,#18492,#19192,.T.);+#19192 = SURFACE_CURVE('',#19193,(#19197,#19204),.PCURVE_S1.);+#19193 = LINE('',#19194,#19195);+#19194 = CARTESIAN_POINT('',(-7.499999337597E-02,0.375000000004,0.));+#19195 = VECTOR('',#19196,1.);+#19196 = DIRECTION('',(-0.906183139959,0.422885465409,0.));+#19197 = PCURVE('',#18326,#19198);+#19198 = DEFINITIONAL_REPRESENTATION('',(#19199),#19203);+#19199 = LINE('',#19200,#19201);+#19200 = CARTESIAN_POINT('',(-0.520267404657,-0.415763807485));+#19201 = VECTOR('',#19202,1.);+#19202 = DIRECTION('',(-0.906183139959,0.422885465409));+#19203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19204 = PCURVE('',#18183,#19205);+#19205 = DEFINITIONAL_REPRESENTATION('',(#19206),#19210);+#19206 = LINE('',#19207,#19208);+#19207 = CARTESIAN_POINT('',(8.276472676639E-02,0.));+#19208 = VECTOR('',#19209,1.);+#19209 = DIRECTION('',(-1.,0.));+#19210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19211 = ORIENTED_EDGE('',*,*,#18491,.T.);+#19212 = ORIENTED_EDGE('',*,*,#19213,.F.);+#19213 = EDGE_CURVE('',#19214,#18494,#19216,.T.);+#19214 = VERTEX_POINT('',#19215);+#19215 = CARTESIAN_POINT('',(-0.106284942226,0.460291256551,0.));+#19216 = SURFACE_CURVE('',#19217,(#19221,#19228),.PCURVE_S1.);+#19217 = LINE('',#19218,#19219);+#19218 = CARTESIAN_POINT('',(-0.106284942226,0.460291256551,0.));+#19219 = VECTOR('',#19220,1.);+#19220 = DIRECTION('',(-1.,0.,0.));+#19221 = PCURVE('',#18326,#19222);+#19222 = DEFINITIONAL_REPRESENTATION('',(#19223),#19227);+#19223 = LINE('',#19224,#19225);+#19224 = CARTESIAN_POINT('',(-0.551552353507,-0.330472550938));+#19225 = VECTOR('',#19226,1.);+#19226 = DIRECTION('',(-1.,0.));+#19227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19228 = PCURVE('',#18654,#19229);+#19229 = DEFINITIONAL_REPRESENTATION('',(#19230),#19234);+#19230 = LINE('',#19231,#19232);+#19231 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19232 = VECTOR('',#19233,1.);+#19233 = DIRECTION('',(-1.,0.));+#19234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19235 = ORIENTED_EDGE('',*,*,#19236,.F.);+#19236 = EDGE_CURVE('',#19237,#19214,#19239,.T.);+#19237 = VERTEX_POINT('',#19238);+#19238 = CARTESIAN_POINT('',(-0.106284942226,0.540291256554,0.));+#19239 = SURFACE_CURVE('',#19240,(#19244,#19251),.PCURVE_S1.);+#19240 = LINE('',#19241,#19242);+#19241 = CARTESIAN_POINT('',(-0.106284942226,0.540291256554,0.));+#19242 = VECTOR('',#19243,1.);+#19243 = DIRECTION('',(0.,-1.,0.));+#19244 = PCURVE('',#18326,#19245);+#19245 = DEFINITIONAL_REPRESENTATION('',(#19246),#19250);+#19246 = LINE('',#19247,#19248);+#19247 = CARTESIAN_POINT('',(-0.551552353507,-0.250472550935));+#19248 = VECTOR('',#19249,1.);+#19249 = DIRECTION('',(0.,-1.));+#19250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19251 = PCURVE('',#19252,#19257);+#19252 = PLANE('',#19253);+#19253 = AXIS2_PLACEMENT_3D('',#19254,#19255,#19256);+#19254 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19255 = DIRECTION('',(-1.,0.,0.));+#19256 = DIRECTION('',(0.,-1.,0.));+#19257 = DEFINITIONAL_REPRESENTATION('',(#19258),#19262);+#19258 = LINE('',#19259,#19260);+#19259 = CARTESIAN_POINT('',(1.513750127433,-0.1));+#19260 = VECTOR('',#19261,1.);+#19261 = DIRECTION('',(1.,0.));+#19262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19263 = ORIENTED_EDGE('',*,*,#19264,.F.);+#19264 = EDGE_CURVE('',#18562,#19237,#19265,.T.);+#19265 = SURFACE_CURVE('',#19266,(#19270,#19277),.PCURVE_S1.);+#19266 = LINE('',#19267,#19268);+#19267 = CARTESIAN_POINT('',(-0.149462039396,0.540291256554,0.));+#19268 = VECTOR('',#19269,1.);+#19269 = DIRECTION('',(1.,0.,0.));+#19270 = PCURVE('',#18326,#19271);+#19271 = DEFINITIONAL_REPRESENTATION('',(#19272),#19276);+#19272 = LINE('',#19273,#19274);+#19273 = CARTESIAN_POINT('',(-0.594729450677,-0.250472550935));+#19274 = VECTOR('',#19275,1.);+#19275 = DIRECTION('',(1.,0.));+#19276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19277 = PCURVE('',#18600,#19278);+#19278 = DEFINITIONAL_REPRESENTATION('',(#19279),#19283);+#19279 = LINE('',#19280,#19281);+#19280 = CARTESIAN_POINT('',(5.925868487522E-02,0.1));+#19281 = VECTOR('',#19282,1.);+#19282 = DIRECTION('',(-1.,-0.));+#19283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19284 = ORIENTED_EDGE('',*,*,#18561,.T.);+#19285 = ORIENTED_EDGE('',*,*,#19286,.T.);+#19286 = EDGE_CURVE('',#18539,#19287,#19289,.T.);+#19287 = VERTEX_POINT('',#19288);+#19288 = CARTESIAN_POINT('',(-7.49999999789E-02,0.625,0.));+#19289 = SURFACE_CURVE('',#19290,(#19294,#19301),.PCURVE_S1.);+#19290 = LINE('',#19291,#19292);+#19291 = CARTESIAN_POINT('',(-0.149462039396,0.59025104827,0.));+#19292 = VECTOR('',#19293,1.);+#19293 = DIRECTION('',(0.906183139987,0.422885465348,0.));+#19294 = PCURVE('',#18326,#19295);+#19295 = DEFINITIONAL_REPRESENTATION('',(#19296),#19300);+#19296 = LINE('',#19297,#19298);+#19297 = CARTESIAN_POINT('',(-0.594729450677,-0.200512759219));+#19298 = VECTOR('',#19299,1.);+#19299 = DIRECTION('',(0.906183139987,0.422885465348));+#19300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19301 = PCURVE('',#18127,#19302);+#19302 = DEFINITIONAL_REPRESENTATION('',(#19303),#19307);+#19303 = LINE('',#19304,#19305);+#19304 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#19305 = VECTOR('',#19306,1.);+#19306 = DIRECTION('',(1.,0.));+#19307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19308 = ORIENTED_EDGE('',*,*,#19309,.F.);+#19309 = EDGE_CURVE('',#19310,#19287,#19312,.T.);+#19310 = VERTEX_POINT('',#19311);+#19311 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#19312 = SURFACE_CURVE('',#19313,(#19317,#19324),.PCURVE_S1.);+#19313 = LINE('',#19314,#19315);+#19314 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#19315 = VECTOR('',#19316,1.);+#19316 = DIRECTION('',(-1.,0.,0.));+#19317 = PCURVE('',#18326,#19318);+#19318 = DEFINITIONAL_REPRESENTATION('',(#19319),#19323);+#19319 = LINE('',#19320,#19321);+#19320 = CARTESIAN_POINT('',(-0.395267411253,-0.165763807489));+#19321 = VECTOR('',#19322,1.);+#19322 = DIRECTION('',(-1.,0.));+#19323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19324 = PCURVE('',#18099,#19325);+#19325 = DEFINITIONAL_REPRESENTATION('',(#19326),#19330);+#19326 = LINE('',#19327,#19328);+#19327 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19328 = VECTOR('',#19329,1.);+#19329 = DIRECTION('',(1.,0.));+#19330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19331 = ORIENTED_EDGE('',*,*,#19332,.T.);+#19332 = EDGE_CURVE('',#19310,#19333,#19335,.T.);+#19333 = VERTEX_POINT('',#19334);+#19334 = CARTESIAN_POINT('',(5.000000002838E-02,0.874999999996,0.));+#19335 = SURFACE_CURVE('',#19336,(#19340,#19347),.PCURVE_S1.);+#19336 = LINE('',#19337,#19338);+#19337 = CARTESIAN_POINT('',(5.000000002838E-02,0.625,0.));+#19338 = VECTOR('',#19339,1.);+#19339 = DIRECTION('',(0.,1.,0.));+#19340 = PCURVE('',#18326,#19341);+#19341 = DEFINITIONAL_REPRESENTATION('',(#19342),#19346);+#19342 = LINE('',#19343,#19344);+#19343 = CARTESIAN_POINT('',(-0.395267411253,-0.165763807489));+#19344 = VECTOR('',#19345,1.);+#19345 = DIRECTION('',(0.,1.));+#19346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19347 = PCURVE('',#18071,#19348);+#19348 = DEFINITIONAL_REPRESENTATION('',(#19349),#19353);+#19349 = LINE('',#19350,#19351);+#19350 = CARTESIAN_POINT('',(0.,0.));+#19351 = VECTOR('',#19352,1.);+#19352 = DIRECTION('',(1.,0.));+#19353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19354 = ORIENTED_EDGE('',*,*,#19355,.F.);+#19355 = EDGE_CURVE('',#19356,#19333,#19358,.T.);+#19356 = VERTEX_POINT('',#19357);+#19357 = CARTESIAN_POINT('',(-7.499999997159E-02,0.874999999996,0.));+#19358 = SURFACE_CURVE('',#19359,(#19363,#19370),.PCURVE_S1.);+#19359 = LINE('',#19360,#19361);+#19360 = CARTESIAN_POINT('',(-7.499999997159E-02,0.874999999996,0.));+#19361 = VECTOR('',#19362,1.);+#19362 = DIRECTION('',(1.,0.,0.));+#19363 = PCURVE('',#18326,#19364);+#19364 = DEFINITIONAL_REPRESENTATION('',(#19365),#19369);+#19365 = LINE('',#19366,#19367);+#19366 = CARTESIAN_POINT('',(-0.520267411253,8.4236192507E-02));+#19367 = VECTOR('',#19368,1.);+#19368 = DIRECTION('',(1.,0.));+#19369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19370 = PCURVE('',#18043,#19371);+#19371 = DEFINITIONAL_REPRESENTATION('',(#19372),#19376);+#19372 = LINE('',#19373,#19374);+#19373 = CARTESIAN_POINT('',(-6.595619994609E-09,0.));+#19374 = VECTOR('',#19375,1.);+#19375 = DIRECTION('',(1.,0.));+#19376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19377 = ORIENTED_EDGE('',*,*,#19378,.T.);+#19378 = EDGE_CURVE('',#19356,#18670,#19379,.T.);+#19379 = SURFACE_CURVE('',#19380,(#19384,#19391),.PCURVE_S1.);+#19380 = LINE('',#19381,#19382);+#19381 = CARTESIAN_POINT('',(-7.499999997159E-02,0.874999999996,0.));+#19382 = VECTOR('',#19383,1.);+#19383 = DIRECTION('',(-0.906183139987,0.422885465348,0.));+#19384 = PCURVE('',#18326,#19385);+#19385 = DEFINITIONAL_REPRESENTATION('',(#19386),#19390);+#19386 = LINE('',#19387,#19388);+#19387 = CARTESIAN_POINT('',(-0.520267411253,8.4236192507E-02));+#19388 = VECTOR('',#19389,1.);+#19389 = DIRECTION('',(-0.906183139987,0.422885465348));+#19390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19391 = PCURVE('',#18015,#19392);+#19392 = DEFINITIONAL_REPRESENTATION('',(#19393),#19397);+#19393 = LINE('',#19394,#19395);+#19394 = CARTESIAN_POINT('',(-8.31576340264E-12,-0.));+#19395 = VECTOR('',#19396,1.);+#19396 = DIRECTION('',(1.,0.));+#19397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19398 = ORIENTED_EDGE('',*,*,#18669,.T.);+#19399 = ORIENTED_EDGE('',*,*,#19400,.F.);+#19400 = EDGE_CURVE('',#19401,#18672,#19403,.T.);+#19401 = VERTEX_POINT('',#19402);+#19402 = CARTESIAN_POINT('',(-0.106284942226,0.960291256553,0.));+#19403 = SURFACE_CURVE('',#19404,(#19408,#19415),.PCURVE_S1.);+#19404 = LINE('',#19405,#19406);+#19405 = CARTESIAN_POINT('',(-0.106284942226,0.960291256553,0.));+#19406 = VECTOR('',#19407,1.);+#19407 = DIRECTION('',(-1.,0.,0.));+#19408 = PCURVE('',#18326,#19409);+#19409 = DEFINITIONAL_REPRESENTATION('',(#19410),#19414);+#19410 = LINE('',#19411,#19412);+#19411 = CARTESIAN_POINT('',(-0.551552353507,0.169527449064));+#19412 = VECTOR('',#19413,1.);+#19413 = DIRECTION('',(-1.,0.));+#19414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19415 = PCURVE('',#18832,#19416);+#19416 = DEFINITIONAL_REPRESENTATION('',(#19417),#19421);+#19417 = LINE('',#19418,#19419);+#19418 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19419 = VECTOR('',#19420,1.);+#19420 = DIRECTION('',(-1.,0.));+#19421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19422 = ORIENTED_EDGE('',*,*,#19423,.F.);+#19423 = EDGE_CURVE('',#19424,#19401,#19426,.T.);+#19424 = VERTEX_POINT('',#19425);+#19425 = CARTESIAN_POINT('',(-0.106284942226,1.040291256551,0.));+#19426 = SURFACE_CURVE('',#19427,(#19431,#19438),.PCURVE_S1.);+#19427 = LINE('',#19428,#19429);+#19428 = CARTESIAN_POINT('',(-0.106284942226,1.040291256551,0.));+#19429 = VECTOR('',#19430,1.);+#19430 = DIRECTION('',(0.,-1.,0.));+#19431 = PCURVE('',#18326,#19432);+#19432 = DEFINITIONAL_REPRESENTATION('',(#19433),#19437);+#19433 = LINE('',#19434,#19435);+#19434 = CARTESIAN_POINT('',(-0.551552353507,0.249527449062));+#19435 = VECTOR('',#19436,1.);+#19436 = DIRECTION('',(0.,-1.));+#19437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19438 = PCURVE('',#19439,#19444);+#19439 = PLANE('',#19440);+#19440 = AXIS2_PLACEMENT_3D('',#19441,#19442,#19443);+#19441 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19442 = DIRECTION('',(-1.,0.,0.));+#19443 = DIRECTION('',(0.,-1.,0.));+#19444 = DEFINITIONAL_REPRESENTATION('',(#19445),#19449);+#19445 = LINE('',#19446,#19447);+#19446 = CARTESIAN_POINT('',(1.013750127436,-0.1));+#19447 = VECTOR('',#19448,1.);+#19448 = DIRECTION('',(1.,0.));+#19449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19450 = ORIENTED_EDGE('',*,*,#19451,.F.);+#19451 = EDGE_CURVE('',#18740,#19424,#19452,.T.);+#19452 = SURFACE_CURVE('',#19453,(#19457,#19464),.PCURVE_S1.);+#19453 = LINE('',#19454,#19455);+#19454 = CARTESIAN_POINT('',(-0.149462039396,1.040291256551,0.));+#19455 = VECTOR('',#19456,1.);+#19456 = DIRECTION('',(1.,0.,0.));+#19457 = PCURVE('',#18326,#19458);+#19458 = DEFINITIONAL_REPRESENTATION('',(#19459),#19463);+#19459 = LINE('',#19460,#19461);+#19460 = CARTESIAN_POINT('',(-0.594729450677,0.249527449062));+#19461 = VECTOR('',#19462,1.);+#19462 = DIRECTION('',(1.,0.));+#19463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19464 = PCURVE('',#18778,#19465);+#19465 = DEFINITIONAL_REPRESENTATION('',(#19466),#19470);+#19466 = LINE('',#19467,#19468);+#19467 = CARTESIAN_POINT('',(5.925868487522E-02,0.1));+#19468 = VECTOR('',#19469,1.);+#19469 = DIRECTION('',(-1.,-0.));+#19470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19471 = ORIENTED_EDGE('',*,*,#18739,.T.);+#19472 = ORIENTED_EDGE('',*,*,#19473,.T.);+#19473 = EDGE_CURVE('',#18717,#19474,#19476,.T.);+#19474 = VERTEX_POINT('',#19475);+#19475 = CARTESIAN_POINT('',(-7.499999997402E-02,1.125000000002,0.));+#19476 = SURFACE_CURVE('',#19477,(#19481,#19488),.PCURVE_S1.);+#19477 = LINE('',#19478,#19479);+#19478 = CARTESIAN_POINT('',(-0.149462039396,1.09025104827,0.));+#19479 = VECTOR('',#19480,1.);+#19480 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#19481 = PCURVE('',#18326,#19482);+#19482 = DEFINITIONAL_REPRESENTATION('',(#19483),#19487);+#19483 = LINE('',#19484,#19485);+#19484 = CARTESIAN_POINT('',(-0.594729450677,0.299487240781));+#19485 = VECTOR('',#19486,1.);+#19486 = DIRECTION('',(0.90618313999,0.422885465342));+#19487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19488 = PCURVE('',#17959,#19489);+#19489 = DEFINITIONAL_REPRESENTATION('',(#19490),#19494);+#19490 = LINE('',#19491,#19492);+#19491 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#19492 = VECTOR('',#19493,1.);+#19493 = DIRECTION('',(1.,0.));+#19494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19495 = ORIENTED_EDGE('',*,*,#19496,.F.);+#19496 = EDGE_CURVE('',#19497,#19474,#19499,.T.);+#19497 = VERTEX_POINT('',#19498);+#19498 = CARTESIAN_POINT('',(5.000000002838E-02,1.125000000002,0.));+#19499 = SURFACE_CURVE('',#19500,(#19504,#19511),.PCURVE_S1.);+#19500 = LINE('',#19501,#19502);+#19501 = CARTESIAN_POINT('',(5.000000002838E-02,1.125000000002,0.));+#19502 = VECTOR('',#19503,1.);+#19503 = DIRECTION('',(-1.,0.,0.));+#19504 = PCURVE('',#18326,#19505);+#19505 = DEFINITIONAL_REPRESENTATION('',(#19506),#19510);+#19506 = LINE('',#19507,#19508);+#19507 = CARTESIAN_POINT('',(-0.395267411253,0.334236192513));+#19508 = VECTOR('',#19509,1.);+#19509 = DIRECTION('',(-1.,0.));+#19510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19511 = PCURVE('',#17931,#19512);+#19512 = DEFINITIONAL_REPRESENTATION('',(#19513),#19517);+#19513 = LINE('',#19514,#19515);+#19514 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19515 = VECTOR('',#19516,1.);+#19516 = DIRECTION('',(1.,0.));+#19517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19518 = ORIENTED_EDGE('',*,*,#19519,.T.);+#19519 = EDGE_CURVE('',#19497,#19520,#19522,.T.);+#19520 = VERTEX_POINT('',#19521);+#19521 = CARTESIAN_POINT('',(5.000000002838E-02,1.374999999998,0.));+#19522 = SURFACE_CURVE('',#19523,(#19527,#19534),.PCURVE_S1.);+#19523 = LINE('',#19524,#19525);+#19524 = CARTESIAN_POINT('',(5.000000002838E-02,1.125000000002,0.));+#19525 = VECTOR('',#19526,1.);+#19526 = DIRECTION('',(0.,1.,0.));+#19527 = PCURVE('',#18326,#19528);+#19528 = DEFINITIONAL_REPRESENTATION('',(#19529),#19533);+#19529 = LINE('',#19530,#19531);+#19530 = CARTESIAN_POINT('',(-0.395267411253,0.334236192513));+#19531 = VECTOR('',#19532,1.);+#19532 = DIRECTION('',(0.,1.));+#19533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19534 = PCURVE('',#17903,#19535);+#19535 = DEFINITIONAL_REPRESENTATION('',(#19536),#19540);+#19536 = LINE('',#19537,#19538);+#19537 = CARTESIAN_POINT('',(1.99995575656E-12,0.));+#19538 = VECTOR('',#19539,1.);+#19539 = DIRECTION('',(1.,0.));+#19540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19541 = ORIENTED_EDGE('',*,*,#19542,.F.);+#19542 = EDGE_CURVE('',#19543,#19520,#19545,.T.);+#19543 = VERTEX_POINT('',#19544);+#19544 = CARTESIAN_POINT('',(-7.499999997524E-02,1.374999999998,0.));+#19545 = SURFACE_CURVE('',#19546,(#19550,#19557),.PCURVE_S1.);+#19546 = LINE('',#19547,#19548);+#19547 = CARTESIAN_POINT('',(-7.499999997524E-02,1.374999999998,0.));+#19548 = VECTOR('',#19549,1.);+#19549 = DIRECTION('',(1.,0.,0.));+#19550 = PCURVE('',#18326,#19551);+#19551 = DEFINITIONAL_REPRESENTATION('',(#19552),#19556);+#19552 = LINE('',#19553,#19554);+#19553 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#19554 = VECTOR('',#19555,1.);+#19555 = DIRECTION('',(1.,0.));+#19556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19557 = PCURVE('',#17875,#19558);+#19558 = DEFINITIONAL_REPRESENTATION('',(#19559),#19563);+#19559 = LINE('',#19560,#19561);+#19560 = CARTESIAN_POINT('',(-6.599269991581E-09,0.));+#19561 = VECTOR('',#19562,1.);+#19562 = DIRECTION('',(1.,0.));+#19563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19564 = ORIENTED_EDGE('',*,*,#19565,.T.);+#19565 = EDGE_CURVE('',#19543,#18848,#19566,.T.);+#19566 = SURFACE_CURVE('',#19567,(#19571,#19578),.PCURVE_S1.);+#19567 = LINE('',#19568,#19569);+#19568 = CARTESIAN_POINT('',(-7.499999997524E-02,1.374999999998,0.));+#19569 = VECTOR('',#19570,1.);+#19570 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#19571 = PCURVE('',#18326,#19572);+#19572 = DEFINITIONAL_REPRESENTATION('',(#19573),#19577);+#19573 = LINE('',#19574,#19575);+#19574 = CARTESIAN_POINT('',(-0.520267411256,0.584236192509));+#19575 = VECTOR('',#19576,1.);+#19576 = DIRECTION('',(-0.90618313999,0.422885465342));+#19577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19578 = PCURVE('',#17847,#19579);+#19579 = DEFINITIONAL_REPRESENTATION('',(#19580),#19584);+#19580 = LINE('',#19581,#19582);+#19581 = CARTESIAN_POINT('',(-4.162359949872E-12,-0.));+#19582 = VECTOR('',#19583,1.);+#19583 = DIRECTION('',(1.,0.));+#19584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19585 = ORIENTED_EDGE('',*,*,#18847,.T.);+#19586 = ORIENTED_EDGE('',*,*,#19587,.F.);+#19587 = EDGE_CURVE('',#19588,#18850,#19590,.T.);+#19588 = VERTEX_POINT('',#19589);+#19589 = CARTESIAN_POINT('',(-0.106284942226,1.460291256555,0.));+#19590 = SURFACE_CURVE('',#19591,(#19595,#19602),.PCURVE_S1.);+#19591 = LINE('',#19592,#19593);+#19592 = CARTESIAN_POINT('',(-0.106284942226,1.460291256555,0.));+#19593 = VECTOR('',#19594,1.);+#19594 = DIRECTION('',(-1.,0.,0.));+#19595 = PCURVE('',#18326,#19596);+#19596 = DEFINITIONAL_REPRESENTATION('',(#19597),#19601);+#19597 = LINE('',#19598,#19599);+#19598 = CARTESIAN_POINT('',(-0.551552353507,0.669527449066));+#19599 = VECTOR('',#19600,1.);+#19600 = DIRECTION('',(-1.,0.));+#19601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19602 = PCURVE('',#19010,#19603);+#19603 = DEFINITIONAL_REPRESENTATION('',(#19604),#19608);+#19604 = LINE('',#19605,#19606);+#19605 = CARTESIAN_POINT('',(0.118918412304,0.1));+#19606 = VECTOR('',#19607,1.);+#19607 = DIRECTION('',(-1.,0.));+#19608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19609 = ORIENTED_EDGE('',*,*,#19610,.F.);+#19610 = EDGE_CURVE('',#19611,#19588,#19613,.T.);+#19611 = VERTEX_POINT('',#19612);+#19612 = CARTESIAN_POINT('',(-0.106284942226,1.540291256553,0.));+#19613 = SURFACE_CURVE('',#19614,(#19618,#19625),.PCURVE_S1.);+#19614 = LINE('',#19615,#19616);+#19615 = CARTESIAN_POINT('',(-0.106284942226,1.540291256553,0.));+#19616 = VECTOR('',#19617,1.);+#19617 = DIRECTION('',(0.,-1.,0.));+#19618 = PCURVE('',#18326,#19619);+#19619 = DEFINITIONAL_REPRESENTATION('',(#19620),#19624);+#19620 = LINE('',#19621,#19622);+#19621 = CARTESIAN_POINT('',(-0.551552353507,0.749527449064));+#19622 = VECTOR('',#19623,1.);+#19623 = DIRECTION('',(0.,-1.));+#19624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19625 = PCURVE('',#19626,#19631);+#19626 = PLANE('',#19627);+#19627 = AXIS2_PLACEMENT_3D('',#19628,#19629,#19630);+#19628 = CARTESIAN_POINT('',(-0.106284942226,2.054041383987,0.1));+#19629 = DIRECTION('',(-1.,0.,0.));+#19630 = DIRECTION('',(0.,-1.,0.));+#19631 = DEFINITIONAL_REPRESENTATION('',(#19632),#19636);+#19632 = LINE('',#19633,#19634);+#19633 = CARTESIAN_POINT('',(0.513750127434,-0.1));+#19634 = VECTOR('',#19635,1.);+#19635 = DIRECTION('',(1.,0.));+#19636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19637 = ORIENTED_EDGE('',*,*,#19638,.F.);+#19638 = EDGE_CURVE('',#18918,#19611,#19639,.T.);+#19639 = SURFACE_CURVE('',#19640,(#19644,#19651),.PCURVE_S1.);+#19640 = LINE('',#19641,#19642);+#19641 = CARTESIAN_POINT('',(-0.149462039396,1.540291256553,0.));+#19642 = VECTOR('',#19643,1.);+#19643 = DIRECTION('',(1.,0.,0.));+#19644 = PCURVE('',#18326,#19645);+#19645 = DEFINITIONAL_REPRESENTATION('',(#19646),#19650);+#19646 = LINE('',#19647,#19648);+#19647 = CARTESIAN_POINT('',(-0.594729450677,0.749527449064));+#19648 = VECTOR('',#19649,1.);+#19649 = DIRECTION('',(1.,0.));+#19650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19651 = PCURVE('',#18956,#19652);+#19652 = DEFINITIONAL_REPRESENTATION('',(#19653),#19657);+#19653 = LINE('',#19654,#19655);+#19654 = CARTESIAN_POINT('',(5.925868487522E-02,0.1));+#19655 = VECTOR('',#19656,1.);+#19656 = DIRECTION('',(-1.,-0.));+#19657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19658 = ORIENTED_EDGE('',*,*,#18917,.T.);+#19659 = ORIENTED_EDGE('',*,*,#19660,.T.);+#19660 = EDGE_CURVE('',#18895,#19661,#19663,.T.);+#19661 = VERTEX_POINT('',#19662);+#19662 = CARTESIAN_POINT('',(-7.499999997037E-02,1.625000000004,0.));+#19663 = SURFACE_CURVE('',#19664,(#19668,#19675),.PCURVE_S1.);+#19664 = LINE('',#19665,#19666);+#19665 = CARTESIAN_POINT('',(-0.149462039396,1.59025104827,0.));+#19666 = VECTOR('',#19667,1.);+#19667 = DIRECTION('',(0.90618313999,0.422885465342,0.));+#19668 = PCURVE('',#18326,#19669);+#19669 = DEFINITIONAL_REPRESENTATION('',(#19670),#19674);+#19670 = LINE('',#19671,#19672);+#19671 = CARTESIAN_POINT('',(-0.594729450677,0.799487240781));+#19672 = VECTOR('',#19673,1.);+#19673 = DIRECTION('',(0.90618313999,0.422885465342));+#19674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19675 = PCURVE('',#17791,#19676);+#19676 = DEFINITIONAL_REPRESENTATION('',(#19677),#19681);+#19677 = LINE('',#19678,#19679);+#19678 = CARTESIAN_POINT('',(5.936554720576E-04,0.));+#19679 = VECTOR('',#19680,1.);+#19680 = DIRECTION('',(1.,0.));+#19681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19682 = ORIENTED_EDGE('',*,*,#19683,.F.);+#19683 = EDGE_CURVE('',#19684,#19661,#19686,.T.);+#19684 = VERTEX_POINT('',#19685);+#19685 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000004,0.));+#19686 = SURFACE_CURVE('',#19687,(#19691,#19698),.PCURVE_S1.);+#19687 = LINE('',#19688,#19689);+#19688 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000004,0.));+#19689 = VECTOR('',#19690,1.);+#19690 = DIRECTION('',(-1.,0.,0.));+#19691 = PCURVE('',#18326,#19692);+#19692 = DEFINITIONAL_REPRESENTATION('',(#19693),#19697);+#19693 = LINE('',#19694,#19695);+#19694 = CARTESIAN_POINT('',(-0.395267411253,0.834236192515));+#19695 = VECTOR('',#19696,1.);+#19696 = DIRECTION('',(-1.,0.));+#19697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19698 = PCURVE('',#17763,#19699);+#19699 = DEFINITIONAL_REPRESENTATION('',(#19700),#19704);+#19700 = LINE('',#19701,#19702);+#19701 = CARTESIAN_POINT('',(-4.999999340726E-02,0.));+#19702 = VECTOR('',#19703,1.);+#19703 = DIRECTION('',(1.,0.));+#19704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19705 = ORIENTED_EDGE('',*,*,#19706,.T.);+#19706 = EDGE_CURVE('',#19684,#19707,#19709,.T.);+#19707 = VERTEX_POINT('',#19708);+#19708 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,0.));+#19709 = SURFACE_CURVE('',#19710,(#19714,#19721),.PCURVE_S1.);+#19710 = LINE('',#19711,#19712);+#19711 = CARTESIAN_POINT('',(5.000000002838E-02,1.625000000004,0.));+#19712 = VECTOR('',#19713,1.);+#19713 = DIRECTION('',(2.026727863371E-04,0.999999979462,0.));+#19714 = PCURVE('',#18326,#19715);+#19715 = DEFINITIONAL_REPRESENTATION('',(#19716),#19720);+#19716 = LINE('',#19717,#19718);+#19717 = CARTESIAN_POINT('',(-0.395267411253,0.834236192515));+#19718 = VECTOR('',#19719,1.);+#19719 = DIRECTION('',(2.026727863371E-04,0.999999979462));+#19720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19721 = PCURVE('',#17735,#19722);+#19722 = DEFINITIONAL_REPRESENTATION('',(#19723),#19727);+#19723 = LINE('',#19724,#19725);+#19724 = CARTESIAN_POINT('',(3.999911595509E-12,0.));+#19725 = VECTOR('',#19726,1.);+#19726 = DIRECTION('',(1.,0.));+#19727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19728 = ORIENTED_EDGE('',*,*,#19729,.T.);+#19729 = EDGE_CURVE('',#19707,#19730,#19732,.T.);+#19730 = VERTEX_POINT('',#19731);+#19731 = CARTESIAN_POINT('',(1.049999999858,1.824906848609,0.));+#19732 = SURFACE_CURVE('',#19733,(#19737,#19744),.PCURVE_S1.);+#19733 = LINE('',#19734,#19735);+#19734 = CARTESIAN_POINT('',(5.004051570722E-02,1.824906848609,0.));+#19735 = VECTOR('',#19736,1.);+#19736 = DIRECTION('',(1.,1.178638311891E-11,0.));+#19737 = PCURVE('',#18326,#19738);+#19738 = DEFINITIONAL_REPRESENTATION('',(#19739),#19743);+#19739 = LINE('',#19740,#19741);+#19740 = CARTESIAN_POINT('',(-0.395226895574,1.03414304112));+#19741 = VECTOR('',#19742,1.);+#19742 = DIRECTION('',(1.,1.178638311891E-11));+#19743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19744 = PCURVE('',#17707,#19745);+#19745 = DEFINITIONAL_REPRESENTATION('',(#19746),#19750);+#19746 = LINE('',#19747,#19748);+#19747 = CARTESIAN_POINT('',(0.,0.));+#19748 = VECTOR('',#19749,1.);+#19749 = DIRECTION('',(1.,0.));+#19750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19751 = ORIENTED_EDGE('',*,*,#19752,.T.);+#19752 = EDGE_CURVE('',#19730,#19753,#19755,.T.);+#19753 = VERTEX_POINT('',#19754);+#19754 = CARTESIAN_POINT('',(1.150000000028,1.724906848557,0.));+#19755 = SURFACE_CURVE('',#19756,(#19761,#19772),.PCURVE_S1.);+#19756 = CIRCLE('',#19757,0.100000000003);+#19757 = AXIS2_PLACEMENT_3D('',#19758,#19759,#19760);+#19758 = CARTESIAN_POINT('',(1.050000000014,1.724906848606,0.));+#19759 = DIRECTION('',(0.,0.,-1.));+#19760 = DIRECTION('',(-1.55373935935E-09,1.,0.));+#19761 = PCURVE('',#18326,#19762);+#19762 = DEFINITIONAL_REPRESENTATION('',(#19763),#19771);+#19763 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#19764,#19765,#19766,#19767+ ,#19768,#19769,#19770),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#19764 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#19765 = CARTESIAN_POINT('',(0.77793766934,1.034143041389));+#19766 = CARTESIAN_POINT('',(0.691335129192,0.88414304125));+#19767 = CARTESIAN_POINT('',(0.604732589044,0.734143041111));+#19768 = CARTESIAN_POINT('',(0.51813004843,0.884143040981));+#19769 = CARTESIAN_POINT('',(0.431527507816,1.034143040851));+#19770 = CARTESIAN_POINT('',(0.604732588578,1.03414304112));+#19771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19772 = PCURVE('',#17680,#19773);+#19773 = DEFINITIONAL_REPRESENTATION('',(#19774),#19777);+#19774 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#19775,#19776),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.570796328839),.PIECEWISE_BEZIER_KNOTS.);+#19775 = CARTESIAN_POINT('',(0.,0.));+#19776 = CARTESIAN_POINT('',(1.570796327285,0.));+#19777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19778 = ORIENTED_EDGE('',*,*,#19779,.T.);+#19779 = EDGE_CURVE('',#19753,#19780,#19782,.T.);+#19780 = VERTEX_POINT('',#19781);+#19781 = CARTESIAN_POINT('',(1.150000000041,-0.125000000009,0.));+#19782 = SURFACE_CURVE('',#19783,(#19787,#19794),.PCURVE_S1.);+#19783 = LINE('',#19784,#19785);+#19784 = CARTESIAN_POINT('',(1.150000000028,1.724906848557,0.));+#19785 = VECTOR('',#19786,1.);+#19786 = DIRECTION('',(4.465841930061E-12,-1.,0.));+#19787 = PCURVE('',#18326,#19788);+#19788 = DEFINITIONAL_REPRESENTATION('',(#19789),#19793);+#19789 = LINE('',#19790,#19791);+#19790 = CARTESIAN_POINT('',(0.704732588747,0.934143041068));+#19791 = VECTOR('',#19792,1.);+#19792 = DIRECTION('',(4.465841930061E-12,-1.));+#19793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19794 = PCURVE('',#17647,#19795);+#19795 = DEFINITIONAL_REPRESENTATION('',(#19796),#19800);+#19796 = LINE('',#19797,#19798);+#19797 = CARTESIAN_POINT('',(5.199995989358E-11,0.));+#19798 = VECTOR('',#19799,1.);+#19799 = DIRECTION('',(1.,0.));+#19800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19801 = ORIENTED_EDGE('',*,*,#19802,.T.);+#19802 = EDGE_CURVE('',#19780,#19803,#19805,.T.);+#19803 = VERTEX_POINT('',#19804);+#19804 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,0.));+#19805 = SURFACE_CURVE('',#19806,(#19811,#19822),.PCURVE_S1.);+#19806 = CIRCLE('',#19807,9.999999999127E-02);+#19807 = AXIS2_PLACEMENT_3D('',#19808,#19809,#19810);+#19808 = CARTESIAN_POINT('',(1.05000000005,-0.124999999946,0.));+#19809 = DIRECTION('',(0.,0.,-1.));+#19810 = DIRECTION('',(1.,-6.266538677405E-10,0.));+#19811 = PCURVE('',#18326,#19812);+#19812 = DEFINITIONAL_REPRESENTATION('',(#19813),#19821);+#19813 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#19814,#19815,#19816,#19817+ ,#19818,#19819,#19820),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#19814 = CARTESIAN_POINT('',(0.70473258876,-0.915763807498));+#19815 = CARTESIAN_POINT('',(0.704732588652,-1.088968888239));+#19816 = CARTESIAN_POINT('',(0.554732588719,-1.002366347775));+#19817 = CARTESIAN_POINT('',(0.404732588786,-0.91576380731));+#19818 = CARTESIAN_POINT('',(0.554732588828,-0.829161267033));+#19819 = CARTESIAN_POINT('',(0.704732588869,-0.742558726756));+#19820 = CARTESIAN_POINT('',(0.70473258876,-0.915763807498));+#19821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19822 = PCURVE('',#17619,#19823);+#19823 = DEFINITIONAL_REPRESENTATION('',(#19824),#19828);+#19824 = LINE('',#19825,#19826);+#19825 = CARTESIAN_POINT('',(0.,0.));+#19826 = VECTOR('',#19827,1.);+#19827 = DIRECTION('',(1.,0.));+#19828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19829 = ORIENTED_EDGE('',*,*,#19830,.T.);+#19830 = EDGE_CURVE('',#19803,#19831,#19833,.T.);+#19831 = VERTEX_POINT('',#19832);+#19832 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,0.));+#19833 = SURFACE_CURVE('',#19834,(#19838,#19845),.PCURVE_S1.);+#19834 = LINE('',#19835,#19836);+#19835 = CARTESIAN_POINT('',(1.050000000032,-0.224999999937,0.));+#19836 = VECTOR('',#19837,1.);+#19837 = DIRECTION('',(-1.,-6.308689681743E-11,0.));+#19838 = PCURVE('',#18326,#19839);+#19839 = DEFINITIONAL_REPRESENTATION('',(#19840),#19844);+#19840 = LINE('',#19841,#19842);+#19841 = CARTESIAN_POINT('',(0.604732588751,-1.015763807426));+#19842 = VECTOR('',#19843,1.);+#19843 = DIRECTION('',(-1.,-6.308689681743E-11));+#19844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19845 = PCURVE('',#17586,#19846);+#19846 = DEFINITIONAL_REPRESENTATION('',(#19847),#19851);+#19847 = LINE('',#19848,#19849);+#19848 = CARTESIAN_POINT('',(0.,0.));+#19849 = VECTOR('',#19850,1.);+#19850 = DIRECTION('',(1.,0.));+#19851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19852 = ORIENTED_EDGE('',*,*,#19853,.T.);+#19853 = EDGE_CURVE('',#19831,#19854,#19856,.T.);+#19854 = VERTEX_POINT('',#19855);+#19855 = CARTESIAN_POINT('',(5.000000002838E-02,-0.124999999998,0.));+#19856 = SURFACE_CURVE('',#19857,(#19861,#19868),.PCURVE_S1.);+#19857 = LINE('',#19858,#19859);+#19858 = CARTESIAN_POINT('',(5.000000002838E-02,-0.225,0.));+#19859 = VECTOR('',#19860,1.);+#19860 = DIRECTION('',(0.,1.,0.));+#19861 = PCURVE('',#18326,#19862);+#19862 = DEFINITIONAL_REPRESENTATION('',(#19863),#19867);+#19863 = LINE('',#19864,#19865);+#19864 = CARTESIAN_POINT('',(-0.395267411253,-1.015763807489));+#19865 = VECTOR('',#19866,1.);+#19866 = DIRECTION('',(0.,1.));+#19867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19868 = PCURVE('',#17558,#19869);+#19869 = DEFINITIONAL_REPRESENTATION('',(#19870),#19874);+#19870 = LINE('',#19871,#19872);+#19871 = CARTESIAN_POINT('',(0.,0.));+#19872 = VECTOR('',#19873,1.);+#19873 = DIRECTION('',(1.,0.));+#19874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19875 = ORIENTED_EDGE('',*,*,#19876,.F.);+#19876 = EDGE_CURVE('',#19877,#19854,#19879,.T.);+#19877 = VERTEX_POINT('',#19878);+#19878 = CARTESIAN_POINT('',(-7.499999998255E-02,-0.124999999998,0.));+#19879 = SURFACE_CURVE('',#19880,(#19884,#19891),.PCURVE_S1.);+#19880 = LINE('',#19881,#19882);+#19881 = CARTESIAN_POINT('',(-7.499999998255E-02,-0.124999999998,0.));+#19882 = VECTOR('',#19883,1.);+#19883 = DIRECTION('',(1.,0.,0.));+#19884 = PCURVE('',#18326,#19885);+#19885 = DEFINITIONAL_REPRESENTATION('',(#19886),#19890);+#19886 = LINE('',#19887,#19888);+#19887 = CARTESIAN_POINT('',(-0.520267411264,-0.915763807487));+#19888 = VECTOR('',#19889,1.);+#19889 = DIRECTION('',(1.,0.));+#19890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19891 = PCURVE('',#17530,#19892);+#19892 = DEFINITIONAL_REPRESENTATION('',(#19893),#19897);+#19893 = LINE('',#19894,#19895);+#19894 = CARTESIAN_POINT('',(-6.606579991408E-09,0.));+#19895 = VECTOR('',#19896,1.);+#19896 = DIRECTION('',(1.,0.));+#19897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19898 = ORIENTED_EDGE('',*,*,#19899,.T.);+#19899 = EDGE_CURVE('',#19877,#18309,#19900,.T.);+#19900 = SURFACE_CURVE('',#19901,(#19905,#19912),.PCURVE_S1.);+#19901 = LINE('',#19902,#19903);+#19902 = CARTESIAN_POINT('',(-7.499999998255E-02,-0.124999999998,0.));+#19903 = VECTOR('',#19904,1.);+#19904 = DIRECTION('',(-0.90618313999,0.422885465342,0.));+#19905 = PCURVE('',#18326,#19906);+#19906 = DEFINITIONAL_REPRESENTATION('',(#19907),#19911);+#19907 = LINE('',#19908,#19909);+#19908 = CARTESIAN_POINT('',(-0.520267411264,-0.915763807487));+#19909 = VECTOR('',#19910,1.);