main
Ray Initial commit: component/tps92513hvdgqt 5bb50d4

TPS92513HVDGQT

Texas Instruments · LED Drivers · MSOP-10-EP

TPS92513HVDGQT from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT output Bootstrap capacitor supply for high-side MOSFET gate driver; 0.1µF ceramic capacitor required with minimum 2V voltage relative to PH for proper switching operation.
2 VIN power_in Input supply voltage; operating range 4.5V to 60V for the TPS92513HV variant.
3 UVLO input Adjustable undervoltage lockout threshold; set using resistor divider from VIN to establish minimum operating voltage with hysteresis.
4 PDIM input PWM dimming input controlling LED output current with duty cycle range 0% to 100% at 100Hz to 1kHz frequency.
5 RT/CLK input Switching frequency control via timing resistor to ground for 100kHz to 2MHz range or external clock input for PLL synchronization up to 2MHz.
6 IADJ input Analog current adjust input with 0V to 1.8V range setting ISENSE voltage through 1:6 divider for LED current adjustment.
7 ISENSE input Current sense input to error amplifier inverting node regulating LED current with typical setpoint range 0mV to 300mV.
8 COMP output Error amplifier output requiring external capacitor (0.01µF to 0.1µF to ground) for loop frequency compensation.
9 GND power_in Ground return; must connect to thermal pad for proper electrical and thermal operation of device.
10 PH output High-side MOSFET source output switching between VIN and ground at controlled frequency up to 2MHz.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category LED Drivers
Pins 11

CAD (KiCad official)

  • Symbol: TPS92513HVDGQT
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: tps92513hvdgqt-etched.step / tps92513hvdgqt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92513hvdgqt.step / tps92513hvdgqt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 d5fcbe22d6bc890f, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF