component
TPS92513HVDGQT
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS92513HVDGQT
Texas Instruments · LED Drivers · MSOP-10-EP
TPS92513HVDGQT from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor supply for high-side MOSFET gate driver; 0.1µF ceramic capacitor required with minimum 2V voltage relative to PH for proper switching operation. |
| 2 | VIN | power_in | Input supply voltage; operating range 4.5V to 60V for the TPS92513HV variant. |
| 3 | UVLO | input | Adjustable undervoltage lockout threshold; set using resistor divider from VIN to establish minimum operating voltage with hysteresis. |
| 4 | PDIM | input | PWM dimming input controlling LED output current with duty cycle range 0% to 100% at 100Hz to 1kHz frequency. |
| 5 | RT/CLK | input | Switching frequency control via timing resistor to ground for 100kHz to 2MHz range or external clock input for PLL synchronization up to 2MHz. |
| 6 | IADJ | input | Analog current adjust input with 0V to 1.8V range setting ISENSE voltage through 1:6 divider for LED current adjustment. |
| 7 | ISENSE | input | Current sense input to error amplifier inverting node regulating LED current with typical setpoint range 0mV to 300mV. |
| 8 | COMP | output | Error amplifier output requiring external capacitor (0.01µF to 0.1µF to ground) for loop frequency compensation. |
| 9 | GND | power_in | Ground return; must connect to thermal pad for proper electrical and thermal operation of device. |
| 10 | PH | output | High-side MOSFET source output switching between VIN and ground at controlled frequency up to 2MHz. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | LED Drivers |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS92513HVDGQT - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
tps92513hvdgqt-etched.step/tps92513hvdgqt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92513hvdgqt.step/tps92513hvdgqt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
d5fcbe22d6bc890f, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).