← Commit history

Initial commit: component/tps92513hvdgqt

Ray ·5bb50d4a94 ·
2 files changed +226
README.mdadded+48
@@ -0,0 +1,48 @@+# TPS92513HVDGQT++**Texas Instruments** · LED Drivers · MSOP-10-EP++TPS92513HVDGQT from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | output | Bootstrap capacitor supply for high-side MOSFET gate driver; 0.1µF ceramic capacitor required with minimum 2V voltage relative to PH for proper switching operation. |+| 2 | VIN | power_in | Input supply voltage; operating range 4.5V to 60V for the TPS92513HV variant. |+| 3 | UVLO | input | Adjustable undervoltage lockout threshold; set using resistor divider from VIN to establish minimum operating voltage with hysteresis. |+| 4 | PDIM | input | PWM dimming input controlling LED output current with duty cycle range 0% to 100% at 100Hz to 1kHz frequency. |+| 5 | RT/CLK | input | Switching frequency control via timing resistor to ground for 100kHz to 2MHz range or external clock input for PLL synchronization up to 2MHz. |+| 6 | IADJ | input | Analog current adjust input with 0V to 1.8V range setting ISENSE voltage through 1:6 divider for LED current adjustment. |+| 7 | ISENSE | input | Current sense input to error amplifier inverting node regulating LED current with typical setpoint range 0mV to 300mV. |+| 8 | COMP | output | Error amplifier output requiring external capacitor (0.01µF to 0.1µF to ground) for loop frequency compensation. |+| 9 | GND | power_in | Ground return; must connect to thermal pad for proper electrical and thermal operation of device. |+| 10 | PH | output | High-side MOSFET source output switching between VIN and ground at controlled frequency up to 2MHz. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | LED Drivers |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS92513HVDGQT`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `tps92513hvdgqt-etched.step` / `tps92513hvdgqt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92513hvdgqt.step` / `tps92513hvdgqt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92513hv) (29 pp, sha256 `d5fcbe22d6bc890f`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92513hvdgqt-datasheet.pdf)
page.jsonadded+178
@@ -0,0 +1,178 @@+{+  "slug": "tps92513hvdgqt",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tps92513hvdgqt",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps92513hvdgqt.kicad_sym",+    "tps92513hvdgqt.kicad_mod",+    "tps92513hvdgqt.glb",+    "tps92513hvdgqt.step",+    "tps92513hvdgqt.lbr",+    "docs/hero.png",+    "docs/tps92513hvdgqt-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS92513HVDGQT",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-10-EP",+    "pin_count": 11,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92513hv",+    "parts": {+      "symbol": "tps92513hvdgqt.kicad_sym",+      "footprint": "tps92513hvdgqt.kicad_mod",+      "model_3d": "tps92513hvdgqt-etched.glb",+      "model_3d_plain": "tps92513hvdgqt.glb",+      "model_3d_step": "tps92513hvdgqt-etched.step",+      "model_3d_step_plain": "tps92513hvdgqt.step",+      "lbr": "tps92513hvdgqt.lbr"+    },+    "distributor_links": {+      "lcsc": "C2678537",+      "digikey": "296-42114-2-ND",+      "mouser": "595-TPS92513HVDGQT"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T01:36:32Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-42114-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS92513HVDGQT",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "BOOT",+        "type": "output",+        "description": "Bootstrap capacitor supply for high-side MOSFET gate driver; 0.1µF ceramic capacitor required with minimum 2V voltage relative to PH for proper switching operation."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage; operating range 4.5V to 60V for the TPS92513HV variant."+      },+      {+        "number": "3",+        "name": "UVLO",+        "type": "input",+        "description": "Adjustable undervoltage lockout threshold; set using resistor divider from VIN to establish minimum operating voltage with hysteresis."+      },+      {+        "number": "4",+        "name": "PDIM",+        "type": "input",+        "description": "PWM dimming input controlling LED output current with duty cycle range 0% to 100% at 100Hz to 1kHz frequency."+      },+      {+        "number": "5",+        "name": "RT/CLK",+        "type": "input",+        "description": "Switching frequency control via timing resistor to ground for 100kHz to 2MHz range or external clock input for PLL synchronization up to 2MHz."+      },+      {+        "number": "6",+        "name": "IADJ",+        "type": "input",+        "description": "Analog current adjust input with 0V to 1.8V range setting ISENSE voltage through 1:6 divider for LED current adjustment."+      },+      {+        "number": "7",+        "name": "ISENSE",+        "type": "input",+        "description": "Current sense input to error amplifier inverting node regulating LED current with typical setpoint range 0mV to 300mV."+      },+      {+        "number": "8",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output requiring external capacitor (0.01µF to 0.1µF to ground) for loop frequency compensation."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground return; must connect to thermal pad for proper electrical and thermal operation of device."+      },+      {+        "number": "10",+        "name": "PH",+        "type": "output",+        "description": "High-side MOSFET source output switching between VIN and ground at controlled frequency up to 2MHz."+      },+      {+        "number": "11",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed thermal pad (PowerPAD) designated as 'PAD' in datasheet pin configuration table rather than ",+          "exposed pad 11 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 29,+        "cost_usd": 0.3606,+        "at": "2026-09-27T01:36:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps92513hv",+        "pages": 29,+        "sha256": "d5fcbe22d6bc890f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file