main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps7a5401qrgrrq1: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps7a5401qrgrrq1-etched.glb Publish 0.1.0 · Ray
tps7a5401qrgrrq1-etched.step tps7a5401qrgrrq1: factory component page (tier=mfr) · Ray
tps7a5401qrgrrq1-hero.glb tps7a5401qrgrrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tps7a5401qrgrrq1-hero.overlay.json Publish 0.1.0 · Ray
tps7a5401qrgrrq1.glb Publish 0.1.0 · Ray
tps7a5401qrgrrq1.kicad_mod Publish 0.1.0 · Ray
tps7a5401qrgrrq1.kicad_sym Publish 0.1.0 · Ray
tps7a5401qrgrrq1.lbr Publish 0.1.0 · Ray
tps7a5401qrgrrq1.step Publish 0.1.0 · Ray

TPS7A5401QRGRRQ1

Texas Instruments · Linear Voltage Regulators (LDO) · VQFN-20-EP(3.5x3.5)

TPS7A5401QRGRRQ1 from Texas Instruments, in a VQFN-20-EP(3.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible.
2 NC unconnected No internal connection.
3 FB input Feedback pin to the error amplifier; a 10-nF feed-forward capacitor from FB to OUT is recommended to maximize AC performance, although it can disrupt PG functionality.
4 PG output Active-high open-drain power-good output that indicates when the output voltage reaches VIT(PG) of the target, with a PG sink current limit of 5 mA maximum.
5 DNC unconnected Do not connect.
6 NC unconnected No internal connection.
7 NC unconnected No internal connection.
8 GND power_in Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection.
9 NC unconnected No internal connection.
10 NC unconnected No internal connection.
11 NC unconnected No internal connection.
12 BIAS power_in Bias supply voltage (3.0 V to 6.5 V recommended) that enables low-input-voltage, low-output operation and improves DC and AC performance for VIN ≤ 2.2 V; a 10-µF or larger capacitor to ground is required when used, and the pin may be left floating or tied to ground if not used.
13 NR/SS passive Noise-reduction and soft-start pin; a 10-nF or larger capacitor from NR/SS to GND, placed as close to the pin as possible, is recommended to reduce reference noise and enable soft-start.
14 EN input Enable pin where logic high enables and logic low disables the device (0 V to 6.5 V range), and it must be connected to IN or BIAS if enable functionality is not required.
15 IN power_in Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible.
16 IN power_in Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible.
17 IN power_in Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible.
18 GND power_in Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection.
19 OUT power_out Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible.
20 OUT power_out Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-20-EP(3.5x3.5)
Category Power Supply Chip
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage IN, BIAS, PG, EN -0.3 7 V 4
Voltage OUT (max printed as VIN + 0.3 V) -0.3 V 4
Voltage NR/SS, FB -0.3 3.6 V 4
PG sink current 5 mA sink current into device 4
Operating junction temperature TJ -55 150 °C 4
Storage temperature Tstg -55 150 °C 4
Input supply voltage range VIN 1.1 6.5 V 4
Bias supply voltage range VBIAS 3 6.5 V 4
Enable voltage range VEN 0 6.5 V 4
Output current IOUT 0 4 A 4
Input capacitor CIN 10 47 µF 4
Output capacitor COUT 47 µF 4
Power-good pullup resistance RPG 10 100 kΩ 4
Bottom resistor value in feedback network (adjustable) R2 160 kΩ 4
Operating junction temperature TJ -40 150 °C 4
Output voltage range VOUT 0.8 5.1 V Using external resistors 5
Output voltage accuracy -2.5 1 % 0.8 V ≤ VOUT ≤ 5.15 V, 5 mA ≤ IOUT ≤ 4 A, over VIN, -40℃ < TJ < 150℃ 5
Output voltage accuracy with BIAS -1.75 0.75 % VIN = 1.1 V, 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, -40℃ < TJ < 150℃ 5
Output voltage accuracy -1 1 % 0.8 V ≤ VOUT ≤ 5.15 V, 5 mA ≤ IOUT ≤ 4 A, over VIN, -40℃ < TJ < 125℃ 5
Output voltage accuracy with BIAS -0.75 0.75 % VIN = 1.1 V, 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, -40℃ < TJ < 125℃ 5
Dropout voltage VDO 212 380 mV VIN = 1.4 V, IOUT = 4 A, VFB = 0.8 V, 3% 5
Dropout voltage VDO 311 510 mV VIN = 5.5 V, IOUT = 4 A, VFB = 0.8 V, 3% 5
Dropout voltage VDO 152 295 mV VIN = 1.1 V, 3.0 V ≤ VBIAS ≤ 6.5 V, IOUT = 4A, VFB = 0.8 V, 3% 5
Dropout voltage VDO 380 645 mV VIN = 5.7 V, IOUT = 4 A, VFB = 0.8 V, 3% 5
Output current limit ILIM 4.5 5.2 5.9 A VOUT forced at 0.9 × VOUT(nom), VIN = VOUT(nom) + 0.5 V 5
GND pin current IGND 3 4 mA VIN = 6.5 V, IOUT = 5 mA 6
GND pin current IGND 4.8 6 mA VIN = 1.4 V, IOUT = 4 A 6
EN pin current IEN -0.5 0.5 µA VIN = 6.5 V, VEN = 0 V and 6.5 V 6
BIAS pin current IBIAS 2.4 3.5 mA VIN = 1.1 V, VBIAS = 6.5 V, VOUT(nom) = 0.8 V, IOUT = 4 A 6
PG pin threshold (falling VOUT) VIT-(PG) 0.82 0.88 0.93 x VOUT For falling VOUT 6
PG pin threshold (rising VOUT) VIT+(PG) 0.84 0.9 0.95 x VOUT For rising VOUT 6
NR/SS pin charging current INR/SS 4 6.5 10 µA VNR/SS = GND, VIN = 6.5 V 6
FB pin leakage current IFB -100 100 nA VIN = 6.5 V 6
Rising input supply UVLO with BIAS VUVLO1+(IN) 1.02 1.09 V VIN rising with VBIAS = 3.0 V 5
Falling input supply UVLO with BIAS VUVLO1-(IN) 0.55 0.711 V VIN falling with VBIAS = 3.0 V 5
Rising input supply UVLO without BIAS VUVLO2+(IN) 1.31 1.39 V VIN rising 5
Falling input supply UVLO without BIAS VUVLO2-(IN) 0.65 1.064 V VIN falling 5
Rising bias supply UVLO VUVLO+(BIAS) 2.83 2.9 V VBIAS rising, VIN = 1.1 V 5
Falling bias supply UVLO VUVLO-(BIAS) 2.45 2.531 V VBIAS falling, VIN = 1.1 V 5
Bias capacitor CBIAS 10 µF 4
NR/SS capacitor CNR/SS 10 nF 4
Feed-forward capacitor CFF 10 nF 4
Top resistor value in feedback network (adjustable) R1 12.1 kΩ 4
Feedback voltage VFB 0.8 V 5
NR/SS pin voltage VNR/SS 0.8 V 5
Line regulation ΔVOUT/ΔVIN 0.003 mV/V IOUT = 5 mA, 1.4 V ≤ VIN ≤ 6.5 V 5
Load regulation ΔVOUT/ΔIOUT 0.07 mV/A 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, VIN = 1.1 V 5
Load regulation ΔVOUT/ΔIOUT 0.08 mV/A 5 mA ≤ IOUT ≤ 4 A 5
Load regulation ΔVOUT/ΔIOUT 0.4 mV/A 5 mA ≤ IOUT ≤ 4 A, VOUT = 5.0 V 5
EN pin low-level input voltage (disable device) VIL(EN) 0.5 V 6
EN pin high-level input voltage (enable device) VIH(EN) 1.1 V 6
PG pin low-level output voltage VOL(PG) 0.4 V VOUT < VIT(PG), IPG = -1 mA (current into device) 6
GND pin shutdown current IGND 25 µA Shutdown, PG = open, VIN = 6.5 V, VEN = 0.5 V 6
Short-circuit current limit ISC 1 A RLOAD = 20 mΩ 5
Output voltage noise Vn 4.4 µVRMS BW = 10 Hz to 100 kHz, VIN = 1.1 V, VOUT = 0.8 V, VBIAS = 5.0 V, IOUT = 4 A, CNR/SS = 100 nF, CFF = 10 nF, COUT = 47 µF // 10 µF // 10 µF 6
Output voltage noise Vn 8.4 µVRMS BW = 10 Hz to 100 kHz, VOUT = 5.0 V, IOUT = 4 A, CNR/SS = 100 nF, CFF = 10 nF, COUT = 47 µF // 10 µF // 10 µF 6
Thermal shutdown temperature TSD 160 °C Shutdown, temperature increasing 6
Thermal shutdown reset temperature TSD 140 °C Reset, temperature decreasing 6
Junction-to-ambient thermal resistance RθJA 43.4 °C/W RGR (VQFN), 20 pins 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 3.4 °C/W RGR (VQFN), 20 pins 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper capacitor, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. To avoid negative system performance, do not use of vias and long traces t 28

CAD (KiCad official)

  • Symbol: TPS7A5401QRGRRQ1
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm
  • 3D model: VQFN-20-EP(3.5x3.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps7a5401qrgrrq1-etched.step / tps7a5401qrgrrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a5401qrgrrq1.step / tps7a5401qrgrrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 2da9425e84f20dfd, retrieved 2026-10-29, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF