main
Ray
Publish 0.1.0
6237925
TPS7A5401QRGRRQ1
Texas Instruments · Linear Voltage Regulators (LDO) · VQFN-20-EP(3.5x3.5)
TPS7A5401QRGRRQ1 from Texas Instruments, in a VQFN-20-EP(3.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible. |
| 2 | NC | unconnected | No internal connection. |
| 3 | FB | input | Feedback pin to the error amplifier; a 10-nF feed-forward capacitor from FB to OUT is recommended to maximize AC performance, although it can disrupt PG functionality. |
| 4 | PG | output | Active-high open-drain power-good output that indicates when the output voltage reaches VIT(PG) of the target, with a PG sink current limit of 5 mA maximum. |
| 5 | DNC | unconnected | Do not connect. |
| 6 | NC | unconnected | No internal connection. |
| 7 | NC | unconnected | No internal connection. |
| 8 | GND | power_in | Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | NC | unconnected | No internal connection. |
| 11 | NC | unconnected | No internal connection. |
| 12 | BIAS | power_in | Bias supply voltage (3.0 V to 6.5 V recommended) that enables low-input-voltage, low-output operation and improves DC and AC performance for VIN ≤ 2.2 V; a 10-µF or larger capacitor to ground is required when used, and the pin may be left floating or tied to ground if not used. |
| 13 | NR/SS | passive | Noise-reduction and soft-start pin; a 10-nF or larger capacitor from NR/SS to GND, placed as close to the pin as possible, is recommended to reduce reference noise and enable soft-start. |
| 14 | EN | input | Enable pin where logic high enables and logic low disables the device (0 V to 6.5 V range), and it must be connected to IN or BIAS if enable functionality is not required. |
| 15 | IN | power_in | Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible. |
| 16 | IN | power_in | Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible. |
| 17 | IN | power_in | Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible. |
| 18 | GND | power_in | Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection. |
| 19 | OUT | power_out | Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible. |
| 20 | OUT | power_out | Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(3.5x3.5) |
| Category | Power Supply Chip |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage IN, BIAS, PG, EN | -0.3 | 7 | V | 4 | |||
| Voltage OUT (max printed as VIN + 0.3 V) | -0.3 | V | 4 | ||||
| Voltage NR/SS, FB | -0.3 | 3.6 | V | 4 | |||
| PG sink current | 5 | mA | sink current into device | 4 | |||
| Operating junction temperature | TJ | -55 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Input supply voltage range | VIN | 1.1 | 6.5 | V | 4 | ||
| Bias supply voltage range | VBIAS | 3 | 6.5 | V | 4 | ||
| Enable voltage range | VEN | 0 | 6.5 | V | 4 | ||
| Output current | IOUT | 0 | 4 | A | 4 | ||
| Input capacitor | CIN | 10 | 47 | µF | 4 | ||
| Output capacitor | COUT | 47 | µF | 4 | |||
| Power-good pullup resistance | RPG | 10 | 100 | kΩ | 4 | ||
| Bottom resistor value in feedback network (adjustable) | R2 | 160 | kΩ | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Output voltage range | VOUT | 0.8 | 5.1 | V | Using external resistors | 5 | |
| Output voltage accuracy | -2.5 | 1 | % | 0.8 V ≤ VOUT ≤ 5.15 V, 5 mA ≤ IOUT ≤ 4 A, over VIN, -40℃ < TJ < 150℃ | 5 | ||
| Output voltage accuracy with BIAS | -1.75 | 0.75 | % | VIN = 1.1 V, 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, -40℃ < TJ < 150℃ | 5 | ||
| Output voltage accuracy | -1 | 1 | % | 0.8 V ≤ VOUT ≤ 5.15 V, 5 mA ≤ IOUT ≤ 4 A, over VIN, -40℃ < TJ < 125℃ | 5 | ||
| Output voltage accuracy with BIAS | -0.75 | 0.75 | % | VIN = 1.1 V, 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, -40℃ < TJ < 125℃ | 5 | ||
| Dropout voltage | VDO | 212 | 380 | mV | VIN = 1.4 V, IOUT = 4 A, VFB = 0.8 V, 3% | 5 | |
| Dropout voltage | VDO | 311 | 510 | mV | VIN = 5.5 V, IOUT = 4 A, VFB = 0.8 V, 3% | 5 | |
| Dropout voltage | VDO | 152 | 295 | mV | VIN = 1.1 V, 3.0 V ≤ VBIAS ≤ 6.5 V, IOUT = 4A, VFB = 0.8 V, 3% | 5 | |
| Dropout voltage | VDO | 380 | 645 | mV | VIN = 5.7 V, IOUT = 4 A, VFB = 0.8 V, 3% | 5 | |
| Output current limit | ILIM | 4.5 | 5.2 | 5.9 | A | VOUT forced at 0.9 × VOUT(nom), VIN = VOUT(nom) + 0.5 V | 5 |
| GND pin current | IGND | 3 | 4 | mA | VIN = 6.5 V, IOUT = 5 mA | 6 | |
| GND pin current | IGND | 4.8 | 6 | mA | VIN = 1.4 V, IOUT = 4 A | 6 | |
| EN pin current | IEN | -0.5 | 0.5 | µA | VIN = 6.5 V, VEN = 0 V and 6.5 V | 6 | |
| BIAS pin current | IBIAS | 2.4 | 3.5 | mA | VIN = 1.1 V, VBIAS = 6.5 V, VOUT(nom) = 0.8 V, IOUT = 4 A | 6 | |
| PG pin threshold (falling VOUT) | VIT-(PG) | 0.82 | 0.88 | 0.93 | x VOUT | For falling VOUT | 6 |
| PG pin threshold (rising VOUT) | VIT+(PG) | 0.84 | 0.9 | 0.95 | x VOUT | For rising VOUT | 6 |
| NR/SS pin charging current | INR/SS | 4 | 6.5 | 10 | µA | VNR/SS = GND, VIN = 6.5 V | 6 |
| FB pin leakage current | IFB | -100 | 100 | nA | VIN = 6.5 V | 6 | |
| Rising input supply UVLO with BIAS | VUVLO1+(IN) | 1.02 | 1.09 | V | VIN rising with VBIAS = 3.0 V | 5 | |
| Falling input supply UVLO with BIAS | VUVLO1-(IN) | 0.55 | 0.711 | V | VIN falling with VBIAS = 3.0 V | 5 | |
| Rising input supply UVLO without BIAS | VUVLO2+(IN) | 1.31 | 1.39 | V | VIN rising | 5 | |
| Falling input supply UVLO without BIAS | VUVLO2-(IN) | 0.65 | 1.064 | V | VIN falling | 5 | |
| Rising bias supply UVLO | VUVLO+(BIAS) | 2.83 | 2.9 | V | VBIAS rising, VIN = 1.1 V | 5 | |
| Falling bias supply UVLO | VUVLO-(BIAS) | 2.45 | 2.531 | V | VBIAS falling, VIN = 1.1 V | 5 | |
| Bias capacitor | CBIAS | 10 | µF | 4 | |||
| NR/SS capacitor | CNR/SS | 10 | nF | 4 | |||
| Feed-forward capacitor | CFF | 10 | nF | 4 | |||
| Top resistor value in feedback network (adjustable) | R1 | 12.1 | kΩ | 4 | |||
| Feedback voltage | VFB | 0.8 | V | 5 | |||
| NR/SS pin voltage | VNR/SS | 0.8 | V | 5 | |||
| Line regulation | ΔVOUT/ΔVIN | 0.003 | mV/V | IOUT = 5 mA, 1.4 V ≤ VIN ≤ 6.5 V | 5 | ||
| Load regulation | ΔVOUT/ΔIOUT | 0.07 | mV/A | 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, VIN = 1.1 V | 5 | ||
| Load regulation | ΔVOUT/ΔIOUT | 0.08 | mV/A | 5 mA ≤ IOUT ≤ 4 A | 5 | ||
| Load regulation | ΔVOUT/ΔIOUT | 0.4 | mV/A | 5 mA ≤ IOUT ≤ 4 A, VOUT = 5.0 V | 5 | ||
| EN pin low-level input voltage (disable device) | VIL(EN) | 0.5 | V | 6 | |||
| EN pin high-level input voltage (enable device) | VIH(EN) | 1.1 | V | 6 | |||
| PG pin low-level output voltage | VOL(PG) | 0.4 | V | VOUT < VIT(PG), IPG = -1 mA (current into device) | 6 | ||
| GND pin shutdown current | IGND | 25 | µA | Shutdown, PG = open, VIN = 6.5 V, VEN = 0.5 V | 6 | ||
| Short-circuit current limit | ISC | 1 | A | RLOAD = 20 mΩ | 5 | ||
| Output voltage noise | Vn | 4.4 | µVRMS | BW = 10 Hz to 100 kHz, VIN = 1.1 V, VOUT = 0.8 V, VBIAS = 5.0 V, IOUT = 4 A, CNR/SS = 100 nF, CFF = 10 nF, COUT = 47 µF // 10 µF // 10 µF | 6 | ||
| Output voltage noise | Vn | 8.4 | µVRMS | BW = 10 Hz to 100 kHz, VOUT = 5.0 V, IOUT = 4 A, CNR/SS = 100 nF, CFF = 10 nF, COUT = 47 µF // 10 µF // 10 µF | 6 | ||
| Thermal shutdown temperature | TSD | 160 | °C | Shutdown, temperature increasing | 6 | ||
| Thermal shutdown reset temperature | TSD | 140 | °C | Reset, temperature decreasing | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 43.4 | °C/W | RGR (VQFN), 20 pins | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 3.4 | °C/W | RGR (VQFN), 20 pins | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitor, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. To avoid negative system performance, do not use of vias and long traces t | 28 |
CAD (KiCad official)
- Symbol:
TPS7A5401QRGRRQ1 - Footprint:
Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm - 3D model: VQFN-20-EP(3.5x3.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps7a5401qrgrrq1-etched.step/tps7a5401qrgrrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a5401qrgrrq1.step/tps7a5401qrgrrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
2da9425e84f20dfd, retrieved 2026-10-29, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS7A5401QRGRRQ1
**Texas Instruments** · Linear Voltage Regulators (LDO) · VQFN-20-EP(3.5x3.5)
TPS7A5401QRGRRQ1 from Texas Instruments, in a VQFN-20-EP(3.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible. |
| 2 | NC | unconnected | No internal connection. |
| 3 | FB | input | Feedback pin to the error amplifier; a 10-nF feed-forward capacitor from FB to OUT is recommended to maximize AC performance, although it can disrupt PG functionality. |
| 4 | PG | output | Active-high open-drain power-good output that indicates when the output voltage reaches VIT(PG) of the target, with a PG sink current limit of 5 mA maximum. |
| 5 | DNC | unconnected | Do not connect. |
| 6 | NC | unconnected | No internal connection. |
| 7 | NC | unconnected | No internal connection. |
| 8 | GND | power_in | Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | NC | unconnected | No internal connection. |
| 11 | NC | unconnected | No internal connection. |
| 12 | BIAS | power_in | Bias supply voltage (3.0 V to 6.5 V recommended) that enables low-input-voltage, low-output operation and improves DC and AC performance for VIN ≤ 2.2 V; a 10-µF or larger capacitor to ground is required when used, and the pin may be left floating or tied to ground if not used. |
| 13 | NR/SS | passive | Noise-reduction and soft-start pin; a 10-nF or larger capacitor from NR/SS to GND, placed as close to the pin as possible, is recommended to reduce reference noise and enable soft-start. |
| 14 | EN | input | Enable pin where logic high enables and logic low disables the device (0 V to 6.5 V range), and it must be connected to IN or BIAS if enable functionality is not required. |
| 15 | IN | power_in | Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible. |
| 16 | IN | power_in | Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible. |
| 17 | IN | power_in | Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible. |
| 18 | GND | power_in | Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection. |
| 19 | OUT | power_out | Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible. |
| 20 | OUT | power_out | Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(3.5x3.5) |
| Category | Power Supply Chip |
| Pins | 21 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage IN, BIAS, PG, EN | | -0.3 | | 7 | V | | 4 |
| Voltage OUT (max printed as VIN + 0.3 V) | | -0.3 | | | V | | 4 |
| Voltage NR/SS, FB | | -0.3 | | 3.6 | V | | 4 |
| PG sink current | | | | 5 | mA | sink current into device | 4 |
| Operating junction temperature | TJ | -55 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Input supply voltage range | VIN | 1.1 | | 6.5 | V | | 4 |
| Bias supply voltage range | VBIAS | 3 | | 6.5 | V | | 4 |
| Enable voltage range | VEN | 0 | | 6.5 | V | | 4 |
| Output current | IOUT | 0 | | 4 | A | | 4 |
| Input capacitor | CIN | 10 | | 47 | µF | | 4 |
| Output capacitor | COUT | 47 | | | µF | | 4 |
| Power-good pullup resistance | RPG | 10 | | 100 | kΩ | | 4 |
| Bottom resistor value in feedback network (adjustable) | R2 | | | 160 | kΩ | | 4 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Output voltage range | VOUT | 0.8 | | 5.1 | V | Using external resistors | 5 |
| Output voltage accuracy | | -2.5 | | 1 | % | 0.8 V ≤ VOUT ≤ 5.15 V, 5 mA ≤ IOUT ≤ 4 A, over VIN, -40℃ < TJ < 150℃ | 5 |
| Output voltage accuracy with BIAS | | -1.75 | | 0.75 | % | VIN = 1.1 V, 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, -40℃ < TJ < 150℃ | 5 |
| Output voltage accuracy | | -1 | | 1 | % | 0.8 V ≤ VOUT ≤ 5.15 V, 5 mA ≤ IOUT ≤ 4 A, over VIN, -40℃ < TJ < 125℃ | 5 |
| Output voltage accuracy with BIAS | | -0.75 | | 0.75 | % | VIN = 1.1 V, 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, -40℃ < TJ < 125℃ | 5 |
| Dropout voltage | VDO | | 212 | 380 | mV | VIN = 1.4 V, IOUT = 4 A, VFB = 0.8 V, 3% | 5 |
| Dropout voltage | VDO | | 311 | 510 | mV | VIN = 5.5 V, IOUT = 4 A, VFB = 0.8 V, 3% | 5 |
| Dropout voltage | VDO | | 152 | 295 | mV | VIN = 1.1 V, 3.0 V ≤ VBIAS ≤ 6.5 V, IOUT = 4A, VFB = 0.8 V, 3% | 5 |
| Dropout voltage | VDO | | 380 | 645 | mV | VIN = 5.7 V, IOUT = 4 A, VFB = 0.8 V, 3% | 5 |
| Output current limit | ILIM | 4.5 | 5.2 | 5.9 | A | VOUT forced at 0.9 × VOUT(nom), VIN = VOUT(nom) + 0.5 V | 5 |
| GND pin current | IGND | | 3 | 4 | mA | VIN = 6.5 V, IOUT = 5 mA | 6 |
| GND pin current | IGND | | 4.8 | 6 | mA | VIN = 1.4 V, IOUT = 4 A | 6 |
| EN pin current | IEN | -0.5 | | 0.5 | µA | VIN = 6.5 V, VEN = 0 V and 6.5 V | 6 |
| BIAS pin current | IBIAS | | 2.4 | 3.5 | mA | VIN = 1.1 V, VBIAS = 6.5 V, VOUT(nom) = 0.8 V, IOUT = 4 A | 6 |
| PG pin threshold (falling VOUT) | VIT-(PG) | 0.82 | 0.88 | 0.93 | x VOUT | For falling VOUT | 6 |
| PG pin threshold (rising VOUT) | VIT+(PG) | 0.84 | 0.9 | 0.95 | x VOUT | For rising VOUT | 6 |
| NR/SS pin charging current | INR/SS | 4 | 6.5 | 10 | µA | VNR/SS = GND, VIN = 6.5 V | 6 |
| FB pin leakage current | IFB | -100 | | 100 | nA | VIN = 6.5 V | 6 |
| Rising input supply UVLO with BIAS | VUVLO1+(IN) | | 1.02 | 1.09 | V | VIN rising with VBIAS = 3.0 V | 5 |
| Falling input supply UVLO with BIAS | VUVLO1-(IN) | | 0.55 | 0.711 | V | VIN falling with VBIAS = 3.0 V | 5 |
| Rising input supply UVLO without BIAS | VUVLO2+(IN) | | 1.31 | 1.39 | V | VIN rising | 5 |
| Falling input supply UVLO without BIAS | VUVLO2-(IN) | | 0.65 | 1.064 | V | VIN falling | 5 |
| Rising bias supply UVLO | VUVLO+(BIAS) | | 2.83 | 2.9 | V | VBIAS rising, VIN = 1.1 V | 5 |
| Falling bias supply UVLO | VUVLO-(BIAS) | | 2.45 | 2.531 | V | VBIAS falling, VIN = 1.1 V | 5 |
| Bias capacitor | CBIAS | | 10 | | µF | | 4 |
| NR/SS capacitor | CNR/SS | | 10 | | nF | | 4 |
| Feed-forward capacitor | CFF | | 10 | | nF | | 4 |
| Top resistor value in feedback network (adjustable) | R1 | | 12.1 | | kΩ | | 4 |
| Feedback voltage | VFB | | 0.8 | | V | | 5 |
| NR/SS pin voltage | VNR/SS | | 0.8 | | V | | 5 |
| Line regulation | ΔVOUT/ΔVIN | | 0.003 | | mV/V | IOUT = 5 mA, 1.4 V ≤ VIN ≤ 6.5 V | 5 |
| Load regulation | ΔVOUT/ΔIOUT | | 0.07 | | mV/A | 5 mA ≤ IOUT ≤ 4 A, 3.0 V ≤ VBIAS ≤ 6.5 V, VIN = 1.1 V | 5 |
| Load regulation | ΔVOUT/ΔIOUT | | 0.08 | | mV/A | 5 mA ≤ IOUT ≤ 4 A | 5 |
| Load regulation | ΔVOUT/ΔIOUT | | 0.4 | | mV/A | 5 mA ≤ IOUT ≤ 4 A, VOUT = 5.0 V | 5 |
| EN pin low-level input voltage (disable device) | VIL(EN) | | 0.5 | | V | | 6 |
| EN pin high-level input voltage (enable device) | VIH(EN) | | 1.1 | | V | | 6 |
| PG pin low-level output voltage | VOL(PG) | | 0.4 | | V | VOUT < VIT(PG), IPG = -1 mA (current into device) | 6 |
| GND pin shutdown current | IGND | | 25 | | µA | Shutdown, PG = open, VIN = 6.5 V, VEN = 0.5 V | 6 |
| Short-circuit current limit | ISC | | 1 | | A | RLOAD = 20 mΩ | 5 |
| Output voltage noise | Vn | | 4.4 | | µVRMS | BW = 10 Hz to 100 kHz, VIN = 1.1 V, VOUT = 0.8 V, VBIAS = 5.0 V, IOUT = 4 A, CNR/SS = 100 nF, CFF = 10 nF, COUT = 47 µF // 10 µF // 10 µF | 6 |
| Output voltage noise | Vn | | 8.4 | | µVRMS | BW = 10 Hz to 100 kHz, VOUT = 5.0 V, IOUT = 4 A, CNR/SS = 100 nF, CFF = 10 nF, COUT = 47 µF // 10 µF // 10 µF | 6 |
| Thermal shutdown temperature | TSD | | 160 | | °C | Shutdown, temperature increasing | 6 |
| Thermal shutdown reset temperature | TSD | | 140 | | °C | Reset, temperature decreasing | 6 |
| Junction-to-ambient thermal resistance | RθJA | | 43.4 | | °C/W | RGR (VQFN), 20 pins | 5 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 3.4 | | °C/W | RGR (VQFN), 20 pins | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | capacitor, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. To avoid negative system performance, do not use of vias and long traces t | 28 |
## CAD (KiCad official)
- Symbol: `TPS7A5401QRGRRQ1`
- Footprint: `Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm`
- 3D model: VQFN-20-EP(3.5x3.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `tps7a5401qrgrrq1-etched.step` / `tps7a5401qrgrrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a5401qrgrrq1.step` / `tps7a5401qrgrrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps7a54-q1) (40 pp, sha256 `2da9425e84f20dfd`, retrieved 2026-10-29, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps7a5401qrgrrq1-datasheet.pdf)