main
Ray
Publish 0.1.0
6237925
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301
{
"slug": "tps7a5401qrgrrq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Linear Voltage Regulators (LDO), VQFN-20-EP(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"tps7a5401qrgrrq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps7a5401qrgrrq1.kicad_sym",
"tps7a5401qrgrrq1.kicad_mod",
"tps7a5401qrgrrq1.glb",
"tps7a5401qrgrrq1.step",
"tps7a5401qrgrrq1.lbr",
"docs/hero.png",
"docs/tps7a5401qrgrrq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps7a5401qrgrrq1-hero.glb",
"tps7a5401qrgrrq1-hero.overlay.json",
"tps7a5401qrgrrq1-etched.glb"
],
"component": {
"mpn": "TPS7A5401QRGRRQ1",
"manufacturer": "Texas Instruments",
"package": "VQFN-20-EP(3.5x3.5)",
"pin_count": 21,
"category": "Power Supply Chip",
"subcategory": "Linear Voltage Regulators (LDO)",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps7a54-q1",
"parts": {
"symbol": "tps7a5401qrgrrq1.kicad_sym",
"footprint": "tps7a5401qrgrrq1.kicad_mod",
"model_3d": "tps7a5401qrgrrq1-hero.glb",
"model_3d_plain": "tps7a5401qrgrrq1-etched.glb",
"model_3d_step": "tps7a5401qrgrrq1-etched.step",
"model_3d_step_plain": "tps7a5401qrgrrq1.step",
"lbr": "tps7a5401qrgrrq1.lbr"
},
"distributor_links": {
"lcsc": "C2872291",
"digikey": "296-50507-2-ND",
"mouser": "595-TPS7A5401QRGRRQ1"
},
"distributor_check": {
"checked_at": "2026-10-29T00:04:36Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-50507-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPS7A5401QRGRRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "OUT",
"type": "power_out",
"description": "Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "3",
"name": "FB",
"type": "input",
"description": "Feedback pin to the error amplifier; a 10-nF feed-forward capacitor from FB to OUT is recommended to maximize AC performance, although it can disrupt PG functionality."
},
{
"number": "4",
"name": "PG",
"type": "output",
"description": "Active-high open-drain power-good output that indicates when the output voltage reaches VIT(PG) of the target, with a PG sink current limit of 5 mA maximum."
},
{
"number": "5",
"name": "DNC",
"type": "unconnected",
"description": "Do not connect."
},
{
"number": "6",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "12",
"name": "BIAS",
"type": "power_in",
"description": "Bias supply voltage (3.0 V to 6.5 V recommended) that enables low-input-voltage, low-output operation and improves DC and AC performance for VIN ≤ 2.2 V; a 10-µF or larger capacitor to ground is required when used, and the pin may be left floating or tied to ground if not used."
},
{
"number": "13",
"name": "NR/SS",
"type": "passive",
"description": "Noise-reduction and soft-start pin; a 10-nF or larger capacitor from NR/SS to GND, placed as close to the pin as possible, is recommended to reduce reference noise and enable soft-start."
},
{
"number": "14",
"name": "EN",
"type": "input",
"description": "Enable pin where logic high enables and logic low disables the device (0 V to 6.5 V range), and it must be connected to IN or BIAS if enable functionality is not required."
},
{
"number": "15",
"name": "IN",
"type": "power_in",
"description": "Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible."
},
{
"number": "16",
"name": "IN",
"type": "power_in",
"description": "Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible."
},
{
"number": "17",
"name": "IN",
"type": "power_in",
"description": "Input supply voltage pin (1.1 V to 6.5 V) with a 10-µF or larger ceramic capacitor (5 µF or greater of capacitance) recommended from IN to ground, placed as close to the input as possible."
},
{
"number": "18",
"name": "GND",
"type": "power_in",
"description": "Ground pin that must be connected to ground, the thermal pad, and the other GND pin with a low-impedance connection."
},
{
"number": "19",
"name": "OUT",
"type": "power_out",
"description": "Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible."
},
{
"number": "20",
"name": "OUT",
"type": "power_out",
"description": "Regulated output pin that requires a 47-µF or larger ceramic capacitor (25 µF or greater of capacitance) from OUT to ground for stability, placed as close to the output as possible."
},
{
"number": "21",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The thermal pad is a separate exposed pad that the datasheet describes as internally connected to GN; The pinout and pin functions come from the TPS7A54-Q1 datasheet (SBVS312, ZHCSHR1A). The TPS7A5401QR; The datasheet's pin table gives no explicit KiCad ERC type; types were assigned from the 'I', 'O' an",
"exposed pad 21 added from the footprint"
],
"pages_sent": 11,
"cost_usd": 0.0683,
"at": "2026-10-29T00:04:07"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps7a54-q1",
"pages": 40,
"sha256": "2da9425e84f20dfd",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 21,
"described": 21,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps7a5401qrgrrq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.52,
3.52,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "0d1d5d8691572386546d2a41ae7fe02001adf8276a772b0bb82cd2e6dc024cab",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps7a5401qrgrrq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.52,
3.52,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "a4c65e5ab354a074ac87816170a6132f4c2f2bd9d8d5c2a4c26b2b01b8a2faef",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RGR0020A",
"source_page": 37,
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.9,
"range_mm": [
0.8,
1.0
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "tps7a5401qrgrrq1.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}