TPS7350QP

{
  "slug": "tps7350qp",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7350qp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7350qp.kicad_sym",
    "tps7350qp.kicad_mod",
    "tps7350qp.glb",
    "tps7350qp.step",
    "tps7350qp.lbr",
    "docs/hero.png",
    "docs/tps7350qp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7350qp-hero.glb",
    "tps7350qp-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS7350QP",
    "manufacturer": "Texas Instruments",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps73",
    "parts": {
      "symbol": "tps7350qp.kicad_sym",
      "footprint": "tps7350qp.kicad_mod",
      "model_3d": "tps7350qp-hero.glb",
      "model_3d_plain": "tps7350qp.glb",
      "model_3d_step": "tps7350qp-etched.step",
      "model_3d_step_plain": "tps7350qp.step",
      "lbr": "tps7350qp.lbr"
    },
    "distributor_links": {
      "lcsc": "C2871392",
      "digikey": "2156-TPS7350QP-ND",
      "mouser": "595-TPS7350QP"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T01:44:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-TPS7350QP-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS7350QP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the regulator."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input: a logic high shuts down the regulator into sleep mode (0.5 µA max quiescent at TJ = 25°C), and the pin is rated -0.3 V to 11 V."
      },
      {
        "number": "3",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input supply, rated -0.3 V to 11 V; tied internally in parallel with the other IN pin."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input supply, rated -0.3 V to 11 V; tied internally in parallel with the other IN pin."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated 5-V output (4.9 V to 5.1 V) for 0 mA to 500 mA load current."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated 5-V output (4.9 V to 5.1 V) for 0 mA to 500 mA load current."
      },
      {
        "number": "7",
        "name": "SENSE",
        "type": "input",
        "description": "Output-voltage sense input for the fixed-voltage TPS7350, normally connected to OUT as close to the device as possible (pin is rated -0.3 V to 11 V)."
      },
      {
        "number": "8",
        "name": "RESET",
        "type": "output",
        "description": "Active-low open-drain NMOS reset output that stays low during an undervoltage condition on OUT and goes high after a 200-ms (typ) delay once it clears."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers and names were taken from the PDIP top-view drawing as flattened in the text extraction ; SENSE/FB is SENSE for fixed-voltage parts (TPS7350QP is a 5-V fixed part) and FB only for the adjust; The datasheet does not state a per-pin current or voltage limit for the duplicated IN and OUT pins; "
        ],
        "pages_sent": 8,
        "cost_usd": 0.067,
        "at": "2026-10-08T01:44:24"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps73",
        "pages": 46,
        "sha256": "64058afafde102b9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7350qp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7350qp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e9012abecd302f1d73da814a47709b60ae98a3cc15a437e85425dcf0d88eac22",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}