component
TPS7350QP
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS7350QP
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · PDIP-8
TPS7350QP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the regulator. |
| 2 | EN | input | Enable input: a logic high shuts down the regulator into sleep mode (0.5 µA max quiescent at TJ = 25°C), and the pin is rated -0.3 V to 11 V. |
| 3 | IN | power_in | Unregulated input supply, rated -0.3 V to 11 V; tied internally in parallel with the other IN pin. |
| 4 | IN | power_in | Unregulated input supply, rated -0.3 V to 11 V; tied internally in parallel with the other IN pin. |
| 5 | OUT | power_out | Regulated 5-V output (4.9 V to 5.1 V) for 0 mA to 500 mA load current. |
| 6 | OUT | power_out | Regulated 5-V output (4.9 V to 5.1 V) for 0 mA to 500 mA load current. |
| 7 | SENSE | input | Output-voltage sense input for the fixed-voltage TPS7350, normally connected to OUT as close to the device as possible (pin is rated -0.3 V to 11 V). |
| 8 | RESET | output | Active-low open-drain NMOS reset output that stays low during an undervoltage condition on OUT and goes high after a 200-ms (typ) delay once it clears. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS7350QP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
tps7350qp-etched.step/tps7350qp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7350qp.step/tps7350qp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
64058afafde102b9, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).