component
TPS62134ARGTR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TPS62134ARGTR
Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)
TPS62134ARGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOS | input | Output voltage sense pin and connection for control loop circuitry; must connect directly to output capacitor for feedback; operating voltage -0.3 to 7 V. |
| 2 | SW | tri_state | Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V. |
| 3 | SW | tri_state | Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V. |
| 4 | PG | tri_state | Open-drain power-good output pin; requires external pullup resistor; maximum sink current 2 mA; operating voltage -0.3 to 7 V. |
| 5 | FBS | input | Output-voltage feedback sense pin for positive remote sensing of load voltage; must connect close to load supply node; operating voltage -0.3 to 3 V. |
| 6 | AGND | power_in | Analog ground pin; must connect directly to exposed thermal pad and common ground plane for proper circuit operation. |
| 7 | SS | output | Soft-start output pin; external capacitor connected to this pin sets the soft-start time for controlled output voltage ramp; operating voltage -0.3 to 7 V. |
| 8 | VID1 | input | Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V. |
| 9 | VID0 | input | Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V. |
| 10 | AVIN | power_in | Analog supply voltage input for internal control circuitry; must connect to same source as PVIN; operating range 3 to 17 V. |
| 11 | PVIN | power_in | Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V. |
| 12 | PVIN | power_in | Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V. |
| 13 | EN | input | Enable/disable logic input pin; internal pulldown resistor maintains low logic level when pin floating; operating voltage -0.3 to 7 V. |
| 14 | LPM | input | Low-power-mode input pin for system standby mode with reduced output voltage; operating voltage -0.3 to 7 V. |
| 15 | PGND | power_in | Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane. |
| 16 | PGND | power_in | Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS62134ARGTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps62134argtr-etched.step/tps62134argtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62134argtr.step/tps62134argtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
025c93b0451bd3e1, retrieved 2026-10-01, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS62134ARGTR
**Texas Instruments** · DC-DC Converters · VQFN-16-EP(3x3)
TPS62134ARGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOS | input | Output voltage sense pin and connection for control loop circuitry; must connect directly to output capacitor for feedback; operating voltage -0.3 to 7 V. |
| 2 | SW | tri_state | Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V. |
| 3 | SW | tri_state | Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V. |
| 4 | PG | tri_state | Open-drain power-good output pin; requires external pullup resistor; maximum sink current 2 mA; operating voltage -0.3 to 7 V. |
| 5 | FBS | input | Output-voltage feedback sense pin for positive remote sensing of load voltage; must connect close to load supply node; operating voltage -0.3 to 3 V. |
| 6 | AGND | power_in | Analog ground pin; must connect directly to exposed thermal pad and common ground plane for proper circuit operation. |
| 7 | SS | output | Soft-start output pin; external capacitor connected to this pin sets the soft-start time for controlled output voltage ramp; operating voltage -0.3 to 7 V. |
| 8 | VID1 | input | Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V. |
| 9 | VID0 | input | Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V. |
| 10 | AVIN | power_in | Analog supply voltage input for internal control circuitry; must connect to same source as PVIN; operating range 3 to 17 V. |
| 11 | PVIN | power_in | Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V. |
| 12 | PVIN | power_in | Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V. |
| 13 | EN | input | Enable/disable logic input pin; internal pulldown resistor maintains low logic level when pin floating; operating voltage -0.3 to 7 V. |
| 14 | LPM | input | Low-power-mode input pin for system standby mode with reduced output voltage; operating voltage -0.3 to 7 V. |
| 15 | PGND | power_in | Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane. |
| 16 | PGND | power_in | Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
## CAD (KiCad official)
- Symbol: `TPS62134ARGTR`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `tps62134argtr-etched.step` / `tps62134argtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62134argtr.step` / `tps62134argtr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps62134a.pdf) (31 pp, sha256 `025c93b0451bd3e1`, retrieved 2026-10-01, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps62134argtr-datasheet.pdf)