component
TPS62134ARGTR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# TPS62134ARGTR++**Texas Instruments** · DC-DC Converters · VQFN-16-EP(3x3)++TPS62134ARGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VOS | input | Output voltage sense pin and connection for control loop circuitry; must connect directly to output capacitor for feedback; operating voltage -0.3 to 7 V. |+| 2 | SW | tri_state | Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V. |+| 3 | SW | tri_state | Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V. |+| 4 | PG | tri_state | Open-drain power-good output pin; requires external pullup resistor; maximum sink current 2 mA; operating voltage -0.3 to 7 V. |+| 5 | FBS | input | Output-voltage feedback sense pin for positive remote sensing of load voltage; must connect close to load supply node; operating voltage -0.3 to 3 V. |+| 6 | AGND | power_in | Analog ground pin; must connect directly to exposed thermal pad and common ground plane for proper circuit operation. |+| 7 | SS | output | Soft-start output pin; external capacitor connected to this pin sets the soft-start time for controlled output voltage ramp; operating voltage -0.3 to 7 V. |+| 8 | VID1 | input | Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V. |+| 9 | VID0 | input | Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V. |+| 10 | AVIN | power_in | Analog supply voltage input for internal control circuitry; must connect to same source as PVIN; operating range 3 to 17 V. |+| 11 | PVIN | power_in | Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V. |+| 12 | PVIN | power_in | Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V. |+| 13 | EN | input | Enable/disable logic input pin; internal pulldown resistor maintains low logic level when pin floating; operating voltage -0.3 to 7 V. |+| 14 | LPM | input | Low-power-mode input pin for system standby mode with reduced output voltage; operating voltage -0.3 to 7 V. |+| 15 | PGND | power_in | Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane. |+| 16 | PGND | power_in | Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS62134ARGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps62134argtr-etched.step` / `tps62134argtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62134argtr.step` / `tps62134argtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps62134a.pdf) (31 pp, sha256 `025c93b0451bd3e1`, retrieved 2026-10-01, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps62134argtr-datasheet.pdf)
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "tps62134argtr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps62134argtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps62134argtr.kicad_sym",+ "tps62134argtr.kicad_mod",+ "tps62134argtr.glb",+ "tps62134argtr.step",+ "tps62134argtr.lbr",+ "docs/hero.png",+ "docs/tps62134argtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS62134ARGTR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tps62134a.pdf",+ "parts": {+ "symbol": "tps62134argtr.kicad_sym",+ "footprint": "tps62134argtr.kicad_mod",+ "model_3d": "tps62134argtr-etched.glb",+ "model_3d_plain": "tps62134argtr.glb",+ "model_3d_step": "tps62134argtr-etched.step",+ "model_3d_step_plain": "tps62134argtr.step",+ "lbr": "tps62134argtr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2876757",+ "digikey": "TPS62134ARGTR-ND",+ "mouser": "595-TPS62134ARGTR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T04:34:05Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "TPS62134ARGTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS62134ARGTR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VOS",+ "type": "input",+ "description": "Output voltage sense pin and connection for control loop circuitry; must connect directly to output capacitor for feedback; operating voltage -0.3 to 7 V."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "tri_state",+ "description": "Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "tri_state",+ "description": "Switch node pin connected to internal MOSFET switches; connect inductor between SW pin and output capacitor; operating voltage -0.3 to (VI + 0.3) V."+ },+ {+ "number": "4",+ "name": "PG",+ "type": "tri_state",+ "description": "Open-drain power-good output pin; requires external pullup resistor; maximum sink current 2 mA; operating voltage -0.3 to 7 V."+ },+ {+ "number": "5",+ "name": "FBS",+ "type": "input",+ "description": "Output-voltage feedback sense pin for positive remote sensing of load voltage; must connect close to load supply node; operating voltage -0.3 to 3 V."+ },+ {+ "number": "6",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground pin; must connect directly to exposed thermal pad and common ground plane for proper circuit operation."+ },+ {+ "number": "7",+ "name": "SS",+ "type": "output",+ "description": "Soft-start output pin; external capacitor connected to this pin sets the soft-start time for controlled output voltage ramp; operating voltage -0.3 to 7 V."+ },+ {+ "number": "8",+ "name": "VID1",+ "type": "input",+ "description": "Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V."+ },+ {+ "number": "9",+ "name": "VID0",+ "type": "input",+ "description": "Output-voltage selection input pin (VIDx); used for dynamic voltage programming; operating voltage -0.3 to 7 V."+ },+ {+ "number": "10",+ "name": "AVIN",+ "type": "power_in",+ "description": "Analog supply voltage input for internal control circuitry; must connect to same source as PVIN; operating range 3 to 17 V."+ },+ {+ "number": "11",+ "name": "PVIN",+ "type": "power_in",+ "description": "Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V."+ },+ {+ "number": "12",+ "name": "PVIN",+ "type": "power_in",+ "description": "Power supply input pin for internal power stage; operating input voltage range 3 to 17 V; maximum voltage 20 V."+ },+ {+ "number": "13",+ "name": "EN",+ "type": "input",+ "description": "Enable/disable logic input pin; internal pulldown resistor maintains low logic level when pin floating; operating voltage -0.3 to 7 V."+ },+ {+ "number": "14",+ "name": "LPM",+ "type": "input",+ "description": "Low-power-mode input pin for system standby mode with reduced output voltage; operating voltage -0.3 to 7 V."+ },+ {+ "number": "15",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane."+ },+ {+ "number": "16",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground pin for high-current return path; must connect directly to exposed thermal pad and common ground plane."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PIN 3 is not explicitly listed in the Pin Functions table on page 3; assignment as SW (switch node) ",+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 8,+ "cost_usd": 0.1503,+ "at": "2026-10-01T04:33:50"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tps62134a.pdf",+ "pages": 31,+ "sha256": "025c93b0451bd3e1",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}