main
Ray Publish 0.1.0 566f908
{
  "slug": "tps54719rtet",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps54719rtet",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps54719rtet.kicad_sym",
    "tps54719rtet.kicad_mod",
    "tps54719rtet.glb",
    "tps54719rtet.step",
    "tps54719rtet.lbr",
    "docs/hero.png",
    "docs/tps54719rtet-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps54719rtet-hero.glb",
    "tps54719rtet-hero.overlay.json",
    "tps54719rtet-etched.glb"
  ],
  "component": {
    "mpn": "TPS54719RTET",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps54719",
    "parts": {
      "symbol": "tps54719rtet.kicad_sym",
      "footprint": "tps54719rtet.kicad_mod",
      "model_3d": "tps54719rtet-hero.glb",
      "model_3d_plain": "tps54719rtet-etched.glb",
      "model_3d_step": "tps54719rtet-etched.step",
      "model_3d_step_plain": "tps54719rtet.step",
      "lbr": "tps54719rtet.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868654",
      "digikey": "296-TPS54719RTETTR-ND",
      "mouser": "595-TPS54719RTET"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T00:48:30Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS54719RTETTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS54719RTET",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage: 2.95 V to 6 V."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage: 2.95 V to 6 V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground; this pin should be electrically connected directly to the power pad under the IC."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground; this pin should be electrically connected directly to the power pad under the IC."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground should be electrically connected to GND close to the device."
      },
      {
        "number": "6",
        "name": "VSENSE",
        "type": "input",
        "description": "Inverting node of the transconductance (gm) error amplifier."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and input to the output switch current comparator; frequency compensation components connect to this pin."
      },
      {
        "number": "8",
        "name": "RT",
        "type": "input",
        "description": "Resistor timing pin that sets the switching frequency; the datasheet gives a 16.9 kΩ minimum and 218 kΩ maximum (200 kHz to 2000 kHz)."
      },
      {
        "number": "9",
        "name": "SS/TR",
        "type": "bidirectional",
        "description": "Slow-start pin; an external capacitor sets the output voltage rise time, and the pin can also be used for tracking."
      },
      {
        "number": "10",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and drain of the internal low-side (synchronous) rectifier MOSFET."
      },
      {
        "number": "11",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and drain of the internal low-side (synchronous) rectifier MOSFET."
      },
      {
        "number": "12",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and drain of the internal low-side (synchronous) rectifier MOSFET."
      },
      {
        "number": "13",
        "name": "BOOT",
        "type": "input",
        "description": "A bootstrap capacitor is required between BOOT and PH; if its voltage falls below the BOOT UVLO minimum, the output is forced off until the capacitor is refreshed."
      },
      {
        "number": "14",
        "name": "PWRGD",
        "type": "output",
        "description": "Open-drain power-good output that asserts low if the output is out of regulation due to thermal shutdown, overcurrent, overvoltage/undervoltage, or EN shutdown; absolute maximum 7 V and 10 mA sink."
      },
      {
        "number": "15",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with internal pullup current source; pull below 1.18 V to disable, float to enable, and use two external resistors to set the on/off (UVLO) threshold."
      },
      {
        "number": "16",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage: 2.95 V to 6 V."
      },
      {
        "number": "17",
        "name": "PowerPAD",
        "type": "power_in",
        "description": "GND pin that must be connected to the exposed power pad for proper operation; the pad should connect to the internal PCB ground plane through multiple vias for good thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The garbled diagram text on page 3 shows a 'PH 1' label next to pin 1, but Table 5-1 lists pin 1 as ; Table 5-1 gives no I/O code for AGND. Typed as power_in based on its ground function.; The thermal pad is printed as 'PowerPAD (17)' and is not one of the 16 leads. It is included as pin "
        ],
        "pages_sent": 10,
        "cost_usd": 0.0603,
        "at": "2026-10-31T00:48:17"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps54719",
        "pages": 43,
        "sha256": "7441fbfc5e22b327",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps54719rtet.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps54719rtet-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0ddbb57c865335b96fac3c747a82e9f56e6ef421906e4364e3df852d056fef09",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RTE0016F",
      "source_page": 40,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          0.7,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tps54719rtet.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}