main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps54719rtet: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps54719rtet-etched.glb Publish 0.1.0 · Ray
tps54719rtet-etched.step tps54719rtet: factory component page (tier=mfr) · Ray
tps54719rtet-hero.glb tps54719rtet: hero GLB from the etched model (keeps the MPN mark) · Ray
tps54719rtet-hero.overlay.json Publish 0.1.0 · Ray
tps54719rtet.glb Publish 0.1.0 · Ray
tps54719rtet.kicad_mod Publish 0.1.0 · Ray
tps54719rtet.kicad_sym Publish 0.1.0 · Ray
tps54719rtet.lbr Publish 0.1.0 · Ray
tps54719rtet.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 17 pins · Ray

TPS54719RTET

Texas Instruments · DC-DC Converters · WQFN-16-EP(3x3)

TPS54719RTET from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage: 2.95 V to 6 V.
2 VIN power_in Input supply voltage: 2.95 V to 6 V.
3 GND power_in Power ground; this pin should be electrically connected directly to the power pad under the IC.
4 GND power_in Power ground; this pin should be electrically connected directly to the power pad under the IC.
5 AGND power_in Analog ground should be electrically connected to GND close to the device.
6 VSENSE input Inverting node of the transconductance (gm) error amplifier.
7 COMP output Error amplifier output and input to the output switch current comparator; frequency compensation components connect to this pin.
8 RT input Resistor timing pin that sets the switching frequency; the datasheet gives a 16.9 kΩ minimum and 218 kΩ maximum (200 kHz to 2000 kHz).
9 SS/TR bidirectional Slow-start pin; an external capacitor sets the output voltage rise time, and the pin can also be used for tracking.
10 PH output Source of the internal high-side power MOSFET and drain of the internal low-side (synchronous) rectifier MOSFET.
11 PH output Source of the internal high-side power MOSFET and drain of the internal low-side (synchronous) rectifier MOSFET.
12 PH output Source of the internal high-side power MOSFET and drain of the internal low-side (synchronous) rectifier MOSFET.
13 BOOT input A bootstrap capacitor is required between BOOT and PH; if its voltage falls below the BOOT UVLO minimum, the output is forced off until the capacitor is refreshed.
14 PWRGD output Open-drain power-good output that asserts low if the output is out of regulation due to thermal shutdown, overcurrent, overvoltage/undervoltage, or EN shutdown; absolute maximum 7 V and 10 mA sink.
15 EN input Enable pin with internal pullup current source; pull below 1.18 V to disable, float to enable, and use two external resistors to set the on/off (UVLO) threshold.
16 VIN power_in Input supply voltage: 2.95 V to 6 V.
17 PowerPAD power_in GND pin that must be connected to the exposed power pad for proper operation; the pad should connect to the internal PCB ground plane through multiple vias for good thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16-EP(3x3)
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating input voltage 2.95 6 V 5
Internal undervoltage lockout threshold 2.4 2.8 V Rising VIN 5
Shutdown supply current 1 5 µA EN = 0 V, 2.95 V ≤ VIN ≤ 6 V 5
Quiescent current, Iq Iq 455 550 µA VSENSE = 620 mV, RT = 84 kΩ 5
Enable threshold 1.16 1.25 1.37 V Rising 5
Voltage reference 0.591 0.6 0.609 V 2.95 V ≤ VIN ≤ 6 V, -40°C < TJ < 140°C 5
Voltage reference 0.594 0.6 0.606 V 25°C 5
High-side switch resistance 26 60 mΩ BOOT-PH = 5 V; TJ = 25°C 5
High-side switch resistance 35 70 mΩ BOOT-PH = 2.95 V; TJ = 25°C 5
Low-side switch resistance 26 60 mΩ VIN = 5 V; TJ = 25°C 5
Low-side switch resistance 35 70 mΩ VIN = 2.95 V; TJ = 25°C 5
Error amplifier source/sink current -20 20 µA V(COMP) = 1 V, 100 mV overdrive 5
Current limit threshold 8.5 10.5 A 6
Low-side reverse current limit -2.7 -1.5 A 6
Thermal shutdown 150 155 °C 6
Switching frequency range using RT mode 200 2000 kHz using RT mode 6
Switching frequency 400 490 600 kHz RT = 84 kΩ 6
BOOT-PH UVLO 2.1 2.75 V VIN = 2.95 V 6
SS/TR to VSENSE matching 73 115 mV VSSTR = 0.3 V 6
VIN input voltage (absolute maximum) VIN -0.3 7 V 4
EN input voltage (absolute maximum) EN -0.3 7 V 4
VSENSE input voltage (absolute maximum) VSENSE -0.3 3 V 4
COMP input voltage (absolute maximum) COMP -0.3 3 V 4
PWRGD input voltage (absolute maximum) PWRGD -0.3 7 V 4
SS/TR input voltage (absolute maximum) SS/TR -0.3 3 V 4
RT input voltage (absolute maximum) RT -0.3 6 V 4
BOOT-PH voltage (absolute maximum) BOOT-PH 8 V 4
PH output voltage (absolute maximum) PH -0.6 7 V 4
PH output voltage transient (absolute maximum) PH -2 7 V 10 ns transient 4
EN source current (absolute maximum) EN 100 µA 4
RT source current (absolute maximum) RT 100 µA 4
COMP sink current (absolute maximum) COMP 100 µA 4
PWRGD sink current (absolute maximum) PWRGD 10 mA 4
SS/TR sink current (absolute maximum) SS/TR 100 µA 4
Operating junction temperature (absolute maximum) Tj -40 140 °C 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Supply voltage VIN (recommended operating) VIN 2.95 6 V 4
EN input voltage (recommended operating) EN 0 6 V 4
PWRGD input voltage (recommended operating) PWRGD 0 6 V 4
SS/RT input voltage (recommended operating) SS/RT 0 2.7 V 4
RT input voltage (recommended operating) RT 0 5.5 V 4
Operating free-air temperature TA -40 85 °C 4
Junction-to-ambient thermal resistance RθJA 49.1 °C/W standard board 5
Junction-to-ambient thermal resistance RθJA 37 °C/W custom board 5
Junction-to-top characterization parameter ψJT 0.7 °C/W 5
Junction-to-board characterization parameter ψJB 21.8 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 50.7 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 7.5 °C/W 5
Junction-to-board thermal resistance RθJB 21.8 °C/W 5

CAD (KiCad official)

  • Symbol: TPS54719RTET
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps54719rtet-etched.step / tps54719rtet-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54719rtet.step / tps54719rtet.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 7441fbfc5e22b327, retrieved 2026-10-31, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF