component
TPS54356PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/tps54356pwpr
b65c6b2
TPS54356PWPR
Texas Instruments · DC-DC Converters · HTSSOP-16-EP
TPS54356PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage requiring 4.5 V to 20 V with low-ESR 10 µF ceramic bypass capacitor placed close to device pins. |
| 2 | VIN | power_in | Input supply voltage requiring 4.5 V to 20 V with low-ESR 10 µF ceramic bypass capacitor placed close to device pins. |
| 3 | UVLO | input | Undervoltage lockout input with internal voltage divider that can be overridden by external resistive divider from VIN to ground. |
| 4 | PWRGD | tri_state | Open-drain power good output asserted low when output voltage falls below nominal or fault conditions detected with internal rising-edge filter. |
| 5 | RT | input | Frequency setting input programmed by grounding for 250 kHz, floating for 500 kHz, or connecting 69-215 kΩ resistor to ground for 250-700 kHz. |
| 6 | SYNC | bidirectional | Bidirectional synchronization I/O outputting falling-edge signal when RT floating/grounded or accepting external synchronization input when RT resistor used with required 10 kΩ ground resistor. |
| 7 | ENA | input | Enable control input stopping device switching when pulled below 0.5 V threshold with float enabling operation. |
| 8 | COMP | output | Error amplifier output internal node with 1.5 mA drive capability that must not be connected externally. |
| 9 | VSENSE | input | Feedback network input node compared to internal voltage reference for output voltage regulation. |
| 10 | AGND | power_in | Analog ground return for sensitive analog circuitry that must connect to PGND and PowerPAD. |
| 11 | PGND | power_in | Power ground return for LSG driver output currents that must connect to AGND and PowerPAD. |
| 12 | VBIAS | power_out | Internal bias voltage output providing 8.0 V at VIN ≥12 V or 4.4 V at VIN = 4.5 V requiring 1.0 µF ceramic bypass capacitor. |
| 13 | LSG | output | Low-side MOSFET gate driver output with 100 mA source/sink capability connecting to n-channel MOSFET gate or left open for diode-only configuration. |
| 14 | PH | output | Phase node switching output with voltage range from −1.5 V to +22 V connecting to external L-C output filter inductance. |
| 15 | PH | output | Phase node switching output with voltage range from −1.5 V to +22 V connecting to external L-C output filter inductance. |
| 16 | BOOT | output | Bootstrap supply connection for high-side gate driver with 0.1 µF ceramic capacitor connecting from BOOT to PH pins. |
| 17 | PowerPAD | power_in | Exposed thermal pad for junction-to-ambient heat dissipation that must solder to PGND and AGND connections. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS54356PWPR - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
tps54356pwpr-etched.step/tps54356pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54356pwpr.step/tps54356pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
1e7f079dce00c4b2, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS54356PWPR
**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP
TPS54356PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage requiring 4.5 V to 20 V with low-ESR 10 µF ceramic bypass capacitor placed close to device pins. |
| 2 | VIN | power_in | Input supply voltage requiring 4.5 V to 20 V with low-ESR 10 µF ceramic bypass capacitor placed close to device pins. |
| 3 | UVLO | input | Undervoltage lockout input with internal voltage divider that can be overridden by external resistive divider from VIN to ground. |
| 4 | PWRGD | tri_state | Open-drain power good output asserted low when output voltage falls below nominal or fault conditions detected with internal rising-edge filter. |
| 5 | RT | input | Frequency setting input programmed by grounding for 250 kHz, floating for 500 kHz, or connecting 69-215 kΩ resistor to ground for 250-700 kHz. |
| 6 | SYNC | bidirectional | Bidirectional synchronization I/O outputting falling-edge signal when RT floating/grounded or accepting external synchronization input when RT resistor used with required 10 kΩ ground resistor. |
| 7 | ENA | input | Enable control input stopping device switching when pulled below 0.5 V threshold with float enabling operation. |
| 8 | COMP | output | Error amplifier output internal node with 1.5 mA drive capability that must not be connected externally. |
| 9 | VSENSE | input | Feedback network input node compared to internal voltage reference for output voltage regulation. |
| 10 | AGND | power_in | Analog ground return for sensitive analog circuitry that must connect to PGND and PowerPAD. |
| 11 | PGND | power_in | Power ground return for LSG driver output currents that must connect to AGND and PowerPAD. |
| 12 | VBIAS | power_out | Internal bias voltage output providing 8.0 V at VIN ≥12 V or 4.4 V at VIN = 4.5 V requiring 1.0 µF ceramic bypass capacitor. |
| 13 | LSG | output | Low-side MOSFET gate driver output with 100 mA source/sink capability connecting to n-channel MOSFET gate or left open for diode-only configuration. |
| 14 | PH | output | Phase node switching output with voltage range from −1.5 V to +22 V connecting to external L-C output filter inductance. |
| 15 | PH | output | Phase node switching output with voltage range from −1.5 V to +22 V connecting to external L-C output filter inductance. |
| 16 | BOOT | output | Bootstrap supply connection for high-side gate driver with 0.1 µF ceramic capacitor connecting from BOOT to PH pins. |
| 17 | PowerPAD | power_in | Exposed thermal pad for junction-to-ambient heat dissipation that must solder to PGND and AGND connections. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
## CAD (KiCad official)
- Symbol: `TPS54356PWPR`
- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`
- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files: `tps54356pwpr-etched.step` / `tps54356pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps54356pwpr.step` / `tps54356pwpr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps54356) (37 pp, sha256 `1e7f079dce00c4b2`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps54356pwpr-datasheet.pdf)