main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps54356pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps54356pwpr: viewers · Ray
package.json tps54356pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps54356pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps54356pwpr · Ray
tps54356pwpr-etched.fit.json tps54356pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54356pwpr-etched.glb tps54356pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54356pwpr-etched.step tps54356pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54356pwpr.glb Publish 0.1.0 · Ray
tps54356pwpr.kicad_mod Publish 0.1.0 · Ray
tps54356pwpr.kicad_sym Publish 0.1.0 · Ray
tps54356pwpr.lbr Publish 0.1.0 · Ray
tps54356pwpr.step Publish 0.1.0 · Ray

TPS54356PWPR

Texas Instruments · DC-DC Converters · HTSSOP-16-EP

TPS54356PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage requiring 4.5 V to 20 V with low-ESR 10 µF ceramic bypass capacitor placed close to device pins.
2 VIN power_in Input supply voltage requiring 4.5 V to 20 V with low-ESR 10 µF ceramic bypass capacitor placed close to device pins.
3 UVLO input Undervoltage lockout input with internal voltage divider that can be overridden by external resistive divider from VIN to ground.
4 PWRGD tri_state Open-drain power good output asserted low when output voltage falls below nominal or fault conditions detected with internal rising-edge filter.
5 RT input Frequency setting input programmed by grounding for 250 kHz, floating for 500 kHz, or connecting 69-215 kΩ resistor to ground for 250-700 kHz.
6 SYNC bidirectional Bidirectional synchronization I/O outputting falling-edge signal when RT floating/grounded or accepting external synchronization input when RT resistor used with required 10 kΩ ground resistor.
7 ENA input Enable control input stopping device switching when pulled below 0.5 V threshold with float enabling operation.
8 COMP output Error amplifier output internal node with 1.5 mA drive capability that must not be connected externally.
9 VSENSE input Feedback network input node compared to internal voltage reference for output voltage regulation.
10 AGND power_in Analog ground return for sensitive analog circuitry that must connect to PGND and PowerPAD.
11 PGND power_in Power ground return for LSG driver output currents that must connect to AGND and PowerPAD.
12 VBIAS power_out Internal bias voltage output providing 8.0 V at VIN ≥12 V or 4.4 V at VIN = 4.5 V requiring 1.0 µF ceramic bypass capacitor.
13 LSG output Low-side MOSFET gate driver output with 100 mA source/sink capability connecting to n-channel MOSFET gate or left open for diode-only configuration.
14 PH output Phase node switching output with voltage range from −1.5 V to +22 V connecting to external L-C output filter inductance.
15 PH output Phase node switching output with voltage range from −1.5 V to +22 V connecting to external L-C output filter inductance.
16 BOOT output Bootstrap supply connection for high-side gate driver with 0.1 µF ceramic capacitor connecting from BOOT to PH pins.
17 PowerPAD power_in Exposed thermal pad for junction-to-ambient heat dissipation that must solder to PGND and AGND connections.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category Power Supply Chip
Pins 17

CAD (KiCad official)

  • Symbol: TPS54356PWPR
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: tps54356pwpr-etched.step / tps54356pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54356pwpr.step / tps54356pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 1e7f079dce00c4b2, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF