main
History Download
Ray tps54327ddar: specified limits as data (metadata.characteristics, 55 rows from the datasheet) e3da962

TPS54327DDAR

Texas Instruments · DC-DC Converters · HSOP-8-EP

TPS54327DDAR from Texas Instruments, in a HSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input control, active high.
2 VFB input Converter feedback input; connect to output voltage with feedback resistor divider.
3 VREG5 power_out 5.5 V power supply output; a capacitor (typical 1 uF) should be connected to GND; VREG5 is not active when EN is low.
4 SS output Soft-start control pin; an external capacitor should be connected to GND to set the soft-start time.
5 GND power_in Ground pin; power ground return for switching circuit, connect sensitive SS and VFB returns to GND at a single point.
6 SW output Switch node connection between the high-side NFET and low-side NFET.
7 VBST input Supply input for the high-side FET gate drive circuit; connect a 0.1 uF capacitor between VBST and SW pins, with an internal diode connected between VREG5 and VBST.
8 VIN power_in Input voltage supply pin.
9 PowerPAD power_in Exposed PowerPAD on the back side of the package; must be soldered for appropriate thermal dissipation and must be connected to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HSOP-8-EP
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN, EN -0.3 20 V 4
Input voltage VBST -0.3 26 V 4
Input voltage VBST -0.3 28 V 10 ns transient 4
Input voltage VBST (vs SW) -0.3 6.5 V vs SW 4
Input voltage VFB, SS -0.3 6.5 V 4
Input voltage SW -2 20 V 4
Input voltage SW -3 22 V 10 ns transient 4
Output voltage VREG5 -0.3 6.5 V 4
Output voltage GND -0.3 0.3 V 4
Voltage from GND to thermal pad Vdiff -0.2 0.2 V 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
Human body model (HBM) ESD rating V(ESD) -2000 2000 V per ANSI/ESDA/JEDEC JS-001 4
Charged-device model (CDM) ESD rating V(ESD) -500 500 V per JEDEC JESD22-C101 4
Supply input voltage VIN 4.5 18 V 4
Input voltage VBST VI -0.1 24 V 4
Input voltage VBST VI -0.1 27 V 10 ns transient 4
Input voltage VBST(vs SW) VI -0.1 6 V vs SW 4
Input voltage SS VI -0.1 5.7 V 4
Input voltage EN VI -0.1 18 V 4
Input voltage VFB VI -0.1 5.5 V 4
Input voltage SW VI -1.8 18 V 4
Input voltage SW VI -3 21 V 10 ns transient 4
Input voltage GND VI -0.1 0.1 V 4
Output voltage VREG5 VO -0.1 5.7 V 4
Output current IVREG5 IVREG5 0 10 mA 4
Operating free-air temperature TA -40 85 °C 4
Operating junction temperature TJ -40 150 °C 4
Operating non-switching supply current (VIN current) IVIN 800 1200 μA TA = 25°C, EN = 5 V, VFB = 0.8 V 5
Shutdown supply current (VIN current) IVINSDN 1.8 10 μA TA = 25°C, EN = 0 V 5
EN high-level input voltage VENH 1.6 V 5
EN low-level input voltage VENL 0.45 V 5
VFB threshold voltage VFBTH 749 765 781 mV TA = 25°C, VO = 1.05 V, continuous mode 5
VFB input current IVFB -0.1 0 0.1 μA VFB = 0.8 V, TA = 25°C 5
VREG5 output voltage VREG5 5.2 5.5 5.7 V TA = 25°C, 6 V < VIN < 18 V, 0 < IVREG5 < 5 mA 5
Line regulation VLN5 25 mV 6 V < VIN < 18 V, IVREG5 = 5 mA 5
Load regulation VLD5 100 mV 0 mA < IVREG5 < 5 mA 5
Output current IVREG5 60 mA VIN = 6 V, VREG5 = 4 V, TA = 25°C 5
Current limit Iocl 3.5 4.2 5.7 A Lout = 1.5 μH, TA = -20ºC to 85ºC 5
Minimum OFF-time tOFF(MIN) 260 310 ns TA = 25°C, VFB = 0.7 V 5
SS charge current ISSC 1.4 2 2.6 μA VSS = 0 V 5
SS discharge current ISSD 0.05 0.1 mA VSS = 0.5 V 5
UVLO wakeup VREG5 voltage UVLO 3.45 3.75 4.05 V 5
UVLO hysteresis VREG5 voltage UVLO 0.17 0.32 0.45 V 5
High-side switch resistance RDS(on)h 100 mΩ 25°C, VBST - SW = 5.5 V 5
Low-side switch resistance RDS(on)l 70 mΩ 25°C 5
Thermal shutdown threshold TSDN 165 °C 5
Thermal shutdown hysteresis 30 °C 5
ON-time tON 150 ns VIN = 12 V, VO = 1.05 V 5
Junction-to-ambient thermal resistance (DDA, HSOP) RθJA 42.1 °C/W 5
Junction-to-case (top) thermal resistance (DDA, HSOP) RθJC(top) 50.9 °C/W 5
Junction-to-board thermal resistance (DDA, HSOP) RθJB 31.8 °C/W 5
Junction-to-top characterization parameter (DDA, HSOP) ψJT 5 °C/W 5
Junction-to-board characterization parameter (DDA, HSOP) ψJB 13.5 °C/W 5
Junction-to-case (bottom) thermal resistance (DDA, HSOP) RθJC(bot) 7.1 °C/W 5

CAD (KiCad official)

  • Symbol: TPS54327DDAR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: HSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: tps54327ddar-etched.step / tps54327ddar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54327ddar.step / tps54327ddar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 1a943870377131ec, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF