Generated by kicad-footprint-generator · KiCad file format 20260206
TPS54327DDAR
Texas Instruments · DC-DC Converters · HSOP-8-EP
TPS54327DDAR from Texas Instruments, in a HSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input control, active high. |
| 2 | VFB | input | Converter feedback input; connect to output voltage with feedback resistor divider. |
| 3 | VREG5 | power_out | 5.5 V power supply output; a capacitor (typical 1 uF) should be connected to GND; VREG5 is not active when EN is low. |
| 4 | SS | output | Soft-start control pin; an external capacitor should be connected to GND to set the soft-start time. |
| 5 | GND | power_in | Ground pin; power ground return for switching circuit, connect sensitive SS and VFB returns to GND at a single point. |
| 6 | SW | output | Switch node connection between the high-side NFET and low-side NFET. |
| 7 | VBST | input | Supply input for the high-side FET gate drive circuit; connect a 0.1 uF capacitor between VBST and SW pins, with an internal diode connected between VREG5 and VBST. |
| 8 | VIN | power_in | Input voltage supply pin. |
| 9 | PowerPAD | power_in | Exposed PowerPAD on the back side of the package; must be soldered for appropriate thermal dissipation and must be connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HSOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN, EN | -0.3 | 20 | V | 4 | |||
| Input voltage VBST | -0.3 | 26 | V | 4 | |||
| Input voltage VBST | -0.3 | 28 | V | 10 ns transient | 4 | ||
| Input voltage VBST (vs SW) | -0.3 | 6.5 | V | vs SW | 4 | ||
| Input voltage VFB, SS | -0.3 | 6.5 | V | 4 | |||
| Input voltage SW | -2 | 20 | V | 4 | |||
| Input voltage SW | -3 | 22 | V | 10 ns transient | 4 | ||
| Output voltage VREG5 | -0.3 | 6.5 | V | 4 | |||
| Output voltage GND | -0.3 | 0.3 | V | 4 | |||
| Voltage from GND to thermal pad | Vdiff | -0.2 | 0.2 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Human body model (HBM) ESD rating | V(ESD) | -2000 | 2000 | V | per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Charged-device model (CDM) ESD rating | V(ESD) | -500 | 500 | V | per JEDEC JESD22-C101 | 4 | |
| Supply input voltage | VIN | 4.5 | 18 | V | 4 | ||
| Input voltage VBST | VI | -0.1 | 24 | V | 4 | ||
| Input voltage VBST | VI | -0.1 | 27 | V | 10 ns transient | 4 | |
| Input voltage VBST(vs SW) | VI | -0.1 | 6 | V | vs SW | 4 | |
| Input voltage SS | VI | -0.1 | 5.7 | V | 4 | ||
| Input voltage EN | VI | -0.1 | 18 | V | 4 | ||
| Input voltage VFB | VI | -0.1 | 5.5 | V | 4 | ||
| Input voltage SW | VI | -1.8 | 18 | V | 4 | ||
| Input voltage SW | VI | -3 | 21 | V | 10 ns transient | 4 | |
| Input voltage GND | VI | -0.1 | 0.1 | V | 4 | ||
| Output voltage VREG5 | VO | -0.1 | 5.7 | V | 4 | ||
| Output current IVREG5 | IVREG5 | 0 | 10 | mA | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Operating non-switching supply current (VIN current) | IVIN | 800 | 1200 | μA | TA = 25°C, EN = 5 V, VFB = 0.8 V | 5 | |
| Shutdown supply current (VIN current) | IVINSDN | 1.8 | 10 | μA | TA = 25°C, EN = 0 V | 5 | |
| EN high-level input voltage | VENH | 1.6 | V | 5 | |||
| EN low-level input voltage | VENL | 0.45 | V | 5 | |||
| VFB threshold voltage | VFBTH | 749 | 765 | 781 | mV | TA = 25°C, VO = 1.05 V, continuous mode | 5 |
| VFB input current | IVFB | -0.1 | 0 | 0.1 | μA | VFB = 0.8 V, TA = 25°C | 5 |
| VREG5 output voltage | VREG5 | 5.2 | 5.5 | 5.7 | V | TA = 25°C, 6 V < VIN < 18 V, 0 < IVREG5 < 5 mA | 5 |
| Line regulation | VLN5 | 25 | mV | 6 V < VIN < 18 V, IVREG5 = 5 mA | 5 | ||
| Load regulation | VLD5 | 100 | mV | 0 mA < IVREG5 < 5 mA | 5 | ||
| Output current | IVREG5 | 60 | mA | VIN = 6 V, VREG5 = 4 V, TA = 25°C | 5 | ||
| Current limit | Iocl | 3.5 | 4.2 | 5.7 | A | Lout = 1.5 μH, TA = -20ºC to 85ºC | 5 |
| Minimum OFF-time | tOFF(MIN) | 260 | 310 | ns | TA = 25°C, VFB = 0.7 V | 5 | |
| SS charge current | ISSC | 1.4 | 2 | 2.6 | μA | VSS = 0 V | 5 |
| SS discharge current | ISSD | 0.05 | 0.1 | mA | VSS = 0.5 V | 5 | |
| UVLO wakeup VREG5 voltage | UVLO | 3.45 | 3.75 | 4.05 | V | 5 | |
| UVLO hysteresis VREG5 voltage | UVLO | 0.17 | 0.32 | 0.45 | V | 5 | |
| High-side switch resistance | RDS(on)h | 100 | mΩ | 25°C, VBST - SW = 5.5 V | 5 | ||
| Low-side switch resistance | RDS(on)l | 70 | mΩ | 25°C | 5 | ||
| Thermal shutdown threshold | TSDN | 165 | °C | 5 | |||
| Thermal shutdown hysteresis | 30 | °C | 5 | ||||
| ON-time | tON | 150 | ns | VIN = 12 V, VO = 1.05 V | 5 | ||
| Junction-to-ambient thermal resistance (DDA, HSOP) | RθJA | 42.1 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DDA, HSOP) | RθJC(top) | 50.9 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DDA, HSOP) | RθJB | 31.8 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DDA, HSOP) | ψJT | 5 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DDA, HSOP) | ψJB | 13.5 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance (DDA, HSOP) | RθJC(bot) | 7.1 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TPS54327DDAR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: HSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
tps54327ddar-etched.step/tps54327ddar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54327ddar.step/tps54327ddar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
1a943870377131ec, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).